Initial version imported to CVS

(This used to be commit 65968b294351d2612d1bf94236d1fcbf853c494e)

12 files changed, 1633 insertions, 0 deletions

diff --git a/docs/INSTALL.txt b/docs/INSTALL.txt
new file mode 100644
index 0000000000..b91367cd59
--- /dev/null
+++ b/docs/INSTALL.txt
@@ -0,0 +1,318 @@
+HOW TO INSTALL AND TEST SAMBA
+=============================
+
+
+STEP 0. Read the man pages. They contain lots of useful info that will
+help to get you started. If you don't know how to read man pages then
+try something like:
+
+	nroff -man smbd.8 | more
+
+STEP 1. Building the binaries
+
+To do this, first edit the file source/Makefile. You will find that
+the Makefile has an entry for most unixes and you need to uncomment
+the one that matches your operating system.
+
+You should also edit the section at the top of the Makefile which
+determines where things will be installed. You need to get this right
+before compilation as Samba needs to find some things at runtime
+(smbrun in particular). There are also settings for where you want
+your log files etc. Make sure you get these right, and that the
+directories exist.
+
+Then type "make". This will create the binaries.
+
+Once it's successfully compiled you can use "make install" to install
+the binaries and manual pages. You can separately install the binaries
+and/or man pages using "make installbin" and "make installman".
+
+Note that if you are upgrading for a previous version of Samba you
+might like to know that the old versions of the binaries will be
+renamed with a ".old" extension. You can go back to the previous
+version with "make revert" if you find this version a disaster!
+
+STEP 2. The all important step
+
+At this stage you must fetch yourself a coffee or other drink you find
+stimulating. Getting the rest of the install right can sometimes be
+tricky, so you will probably need it.
+
+If you have installed samba before then you can skip this step.
+
+STEP 3. Create the smb configuration file. 
+
+There are sample configuration files in the examples subdirectory in
+the distribution. I suggest you read them carefully so you can see how
+the options go together in practice. See the man page for all the
+options.
+
+The simplest useful configuration file would be something like this:
+
+[homes]
+	workgroup = MYGROUP
+	guest ok = no
+	read only = no
+
+which would allow connections by anyone with an account on the server,
+using either their login name or "homes" as the service name. (Note
+that I also set the workgroup that Samba is part of. See BROWSING.txt
+for defails)
+
+Note that "make install" will not install a smb.conf file. You need to
+create it yourself. You will also need to create the path you specify
+in the Makefile for the logs etc, such as /usr/local/samba.
+
+Make sure you put the smb.conf file in the same place you specified in
+the Makefile.
+
+STEP 4. Test your config file with testparm
+
+It's important that you test the validity of your smb.conf file using
+the testparm program. If testparm runs OK then it will list the loaded
+services. If not it will give an error message.
+
+Make sure it runs OK and that the services look resonable before
+proceeding. 
+
+STEP 5. Starting the smbd and nmbd. 
+
+You must choose to start smbd and nmbd either as daemons or from
+inetd. Don't try to do both!  Either you can put them in inetd.conf
+and have them started on demand by inetd, or you can start them as
+daemons either from the command line or in /etc/rc.local. See the man
+pages for details on the command line options.
+
+The main advantage of starting smbd and nmbd as a daemon is that they
+will respond slightly more quickly to an initial connection
+request. This is, however, unlilkely to be a problem.
+
+Step 5a. Starting from inetd.conf
+
+NOTE; The following will be different if you use NIS or NIS+ to
+distributed services maps.
+
+Look at your /etc/services. What is defined at port 139/tcp. If
+nothing is defined then add a line like this:
+
+netbios-ssn     139/tcp
+
+similarly for 137/udp you should have an entry like:
+
+netbios-ns	137/udp
+
+Next edit your /etc/inetd.conf and add two lines something like this:
+
+netbios-ssn stream tcp nowait root /usr/local/samba/bin/smbd smbd 
+netbios-ns dgram udp wait root /usr/local/samba/bin/nmbd nmbd 
+
+The exact syntax of /etc/inetd.conf varies between unixes. Look at the
+other entries in inetd.conf for a guide.
+
+NOTE: Some unixes already have entries like netbios_ns (note the
+underscore) in /etc/services. You must either edit /etc/services or
+/etc/inetd.conf to make them consistant.
+
+NOTE: On many systems you may need to give the nmbd a -B parameter to
+specify the broadcast address of your interface. Run ifconfig as root
+if you don't know what the broadcast is for your net. nmbd tries to
+determine it at run time, but fails on some unixes. See the section on
+"testing nmbd" for a method of finding if you need to do this.
+
+!!!WARNING!!! Many unixes only accept around 5 parameters on the
+command line in inetd. This means you shouldn't use spaces between the
+options and arguments, or you should use a script, and start the
+script from inetd.
+
+Restart inetd, perhaps just send it a HUP. If you have installed an
+earlier version of nmbd then you may need to kill nmbd as well.
+
+Step 5b. Alternative: starting it as a daemon
+
+To start the server as a daemon you should create a script something
+like this one, perhaps calling it "startsmb"
+
+#!/bin/sh
+/usr/local/samba/bin/smbd -D 
+/usr/local/samba/bin/nmbd -D 
+
+then make it executable with "chmod +x startsmb"
+
+You can then run startsmb by hand or execute it from /etc/rc.local
+
+To kill it send a kill signal to the processes nmbd and smbd.
+
+
+
+STEP 7. Try listing the shares available on your server
+
+smbclient -L yourhostname 
+
+Your should get back a list of shares available on your server. If you
+don't then something is incorrectly setup. Note that this method can
+also be used to see what shares are available on other LanManager
+clients (such as WfWg).
+
+If you choose user level security then you may find that Samba requests
+a password before it will list the shares. See the smbclient docs for
+details. (you can force it to list the shares without a password by
+adding the option -U% to the command line. This will not work with
+non-Samba servers)
+
+STEP 8. try connecting with the unix client. eg:
+
+smbclient '\\yourhostname\aservice'
+
+Typically the "yourhostname" would be the name of the host where you
+installed smbd. The "aservice" is any service you have defined in the
+smb.conf file. Try your user name if you just have a [homes] section
+in smb.conf.
+
+For example if your unix host is bambi and your login name is fred you
+would type:
+
+smbclient '\\bambi\fred'
+
+NOTE: The number of slashes to use depends on the type of shell you
+use. You may need '\\\\bambi\\fred' with some shells.
+
+STEP 9. Try connecting from a dos/WfWg/Win95/NT/os-2 client. Try
+mounting disks. eg:
+
+net use d: \\servername\service
+
+Try printing. eg:
+
+net use lpt1: \\servername\spoolservice
+print filename
+
+Celebrate, or send me a bug report!
+
+WHAT IF IT DOESN'T WORK?
+========================
+
+If nothing works and you start to think "who wrote this pile of trash"
+then I suggest you do step 2 again (and again) till you calm down.
+
+Then you might read the file DIAGNOSIS.txt and the FAQ. If you are
+still stuck then try the mailing list or newsgroup (look in the README
+for details). Samba has been successfully installed at thousands of
+sites worldwide, so maybe someone else has hit your problem and has
+overcome it. You could also use the WWW site to scan back issues of
+the samba-digest.
+
+When you fix the problem PLEASE send me some updates to the
+documentation (or source code) so that the next person will find it
+easier. 
+
+DIAGNOSING PROBLEMS
+===================
+
+If you have instalation problems then go to DIAGNOSIS.txt to try to
+find the problem.
+
+SCOPE IDs
+=========
+
+By default Samba uses a blank scope ID. This means all your windows
+boxes must also have a blank scope ID. If you really want to use a
+non-blank scope ID then you will need to use the -i <scope> option to
+nmbd, smbd, and smbclient. All your PCs will need to have the same
+setting for this to work. I do not recommend scope IDs.
+
+
+CHOOSING THE PROTOCOL LEVEL
+===========================
+
+The SMB protocol has many dialects. Currently Samba supports 4, called
+CORE, COREPLUS, LANMAN1, LANMAN2 and NT1.
+
+You can choose what protocols to support in the smb.conf file. The
+default is NT1 and that is the best for the vast majority of sites.
+
+In older versions of Samba you may have found it necessary to use
+COREPLUS. The limitations that led to this have mostly been fixed. It
+is now less likely that you will want to use less than LANMAN1. The
+only remaining advantage of COREPLUS is that for some obscure reason
+WfWg preserves the case of passwords in this protocol, whereas under
+LANMAN1, LANMAN2 or NT1 it uppercases all passwords before sending them,
+forcing you to use the "password level=" option in some cases.
+
+The main advantage of LANMAN2 and NT1 is support for long filenames with some
+clients (eg: smbclient, Windows NT or Win95). 
+
+See the smb.conf manual page for more details.
+
+Note: To support print queue reporting you may find that you have to
+use TCP/IP as the default protocol under WfWg. For some reason if you
+leave Netbeui as the default it may break the print queue reporting on
+some systems. It is presumably a WfWg bug.
+
+
+PRINTING FROM UNIX TO A CLIENT PC
+=================================
+
+To use a printer that is available via a smb-based server from a unix
+host you will need to compile the smbclient program. You then need to
+install the script "smbprint". Read the instruction in smbprint for
+more details.
+
+There is also a SYSV style script that does much the same thing called
+smbprint.sysv. It contains instructions.
+
+
+LOCKING
+=======
+
+One area which sometimes causes trouble is locking.
+
+There are two types of locking which need to be performed by a SMB
+server. The first is "record locking" which allows a client to lock a
+range of bytes in a open file. The second is the "deny modes" that are
+specified when a file is open.
+
+Samba supports "record locking" using the fcntl() unix system
+call. This is often implemented using rpc calls to a rpc.lockd process
+running on the system that owns the filesystem. Unfortunately many
+rpc.lockd implementations are very buggy, particularly when made to
+talk to versions from other vendors. It is not uncommon for the
+rpc.lockd to crash.
+
+There is also a problem translating the 32 bit lock requests generated
+by PC clients to 31 bit requests supported by most
+unixes. Unfortunately many PC applications (typically OLE2
+applications) use byte ranges with the top bit set as semaphore
+sets. Samba attempts translation to support these types of
+applications, and the translation has proved to be quite successful.
+
+Strictly a SMB server should check for locks before every read and
+write call on a file. Unfortunately with the way fcntl() works this
+can be slow and may overstress the rpc.lockd. It is also almost always
+unnecessary as clients are supposed to independently make locking
+calls before reads and writes anyway if locking is important to
+them. By default Samba only makes locking calls when explicitly asked
+to by a client, but if you set "strict locking = yes" then it will
+make lock checking calls on every read and write. 
+
+You can also disable by range locking completely using "locking =
+no". This is useful for those shares that don't support locking or
+don't need it (such as cdroms). In this case Samba fakes the return
+codes of locking calls to tell clients that everything is OK.
+
+The second class of locking is the "deny modes". These are set by an
+application when it opens a file to determine what types of access
+should be allowed simultaneously with it's open. A client may ask for
+DENY_NONE, DENY_READ, DENY_WRITE or DENY_ALL. There are also special
+compatability modes called DENY_FCB and DENY_DOS.
+
+You can disable share modes using "share modes = no". This may be
+useful on a heavily loaded server as the share modes code is very
+slow. 
+
+
+MAPPING USERNAMES
+=================
+
+If you have different usernames on the PCs and the unix server then
+take a look at the "username map" option. See the smb.conf man page
+for details.
diff --git a/docs/MIRRORS b/docs/MIRRORS
new file mode 100644
index 0000000000..9fa10c9fc8
--- /dev/null
+++ b/docs/MIRRORS
@@ -0,0 +1,28 @@
+The main Samba site is nimbus.anu.edu.au in pub/tridge/samba/. Contact
+samba-bugs@anu.edu.au for help with this site.
+
+Mirror sites include:
+
+
+ftp://src.doc.ic.ac.uk/packages/samba
+ftp://ftp.warwick.ac.uk/pub/linux/sunsite.unc-mirror/system/Network/samba
+ftp://sunsite.unc.edu/pub/Linux/system/Network/samba/
+ftp://ftp.choc.apana.org.au/pub/samba
+ftp://ftp.uni-trier.de/pub/unix/network/samba/
+ftp://ftp.spectrum.titan.com/pub/samba
+ftp://ftp.demon.co.uk/pub/unix/unix/samba
+ftp://sunsite.mff.cuni.cz/Net/Protocols/Samba
+
+There are several others. Give archie a try.
+
+SCO binaries available from:
+ftp://ftp.markv.com/pub/samba (built by lance@fox.com)
+
+AIX and DEC OSF/1 binaries are available from:
+ftp://151.99.220.5/pub/samba (built by davide.migliavacca@inferentia.inet.it)
+
+
+Http sites include:
+
+http://lake.canberra.edu.au/pub/samba
+http://www.choc.apana.org.au/pub/samba
diff --git a/docs/OS2.txt b/docs/OS2.txt
new file mode 100644
index 0000000000..7d678a4bfb
--- /dev/null
+++ b/docs/OS2.txt
@@ -0,0 +1,57 @@
+This describes how to use smbclient to connect to an OS/2 server.
+Knowing this allows you to use a OS/2 printer from unix.
+
+Author: riiber@oslonett.no
+
+
+How to login to an OS/2 server
+-------------------------------
+
+Sample setup for OS/2 server running LanMan 2.2:
+
+	OS/2 Server Name      : \\OBV11
+	OS/2 User Account     : ARNE
+	OS/2 Password         : xxx
+	OS/2 shared service 1 : LASER02	
+	OS/2 Shared service 2 : PCPROGS	
+	Samba NetBIOS name    : KLATREMUS
+
+First, the two servers were started with the commands
+smbd and nmbd -n KLATREMUS.
+
+Command to connect to a the shared printer LASER02 on the OS/2 server:
+n
+	smbclient '\\OBV11\LASER02' xxx -n ARNE -U ARNE -P
+
+and to connect to the shared drive 'PCPROGS':
+
+	smbclient '\\OBV11\PCPROGS' xxx -n ARNE -U ARNE
+
+
+If login to the OS/2 server fails:
+----------------------------------
+
+The remarkable OS/2 server requires NetBIOS name to be equal to User name.
+This was the only combination of (NetBIOS name, User name) that allowed login.
+
+Password xxx must be in upper case, case in user name is unimportant.
+
+The OS/2 server responds with "Bad password - name/password pair"
+if the password is illegal (in lowercase, for example).
+
+If correct user name and password, but invalid NetBIOS name is given,
+it responds with "... SMBtcon failed. ERRDOS - 65".
+
+The OS/2 server can disable login from a list of workstations (PCs)
+corresponding to the NetBIOS name (-n option). I set it up to
+allow login from any workstation.
+
+
+
+(I experimented quite a lot with the -U and -n options, printed and browsed
+the MS SMB protocol docs and the RFC's, then read some comp.protocols.smb,
+got some tips, tried some "stupid" command line options, 
+and at last I got it working!)
+
+-Arne-
+
diff --git a/docs/README.OS2 b/docs/README.OS2
new file mode 100644
index 0000000000..ffd818d4ce
--- /dev/null
+++ b/docs/README.OS2
@@ -0,0 +1,81 @@
+Samba 1.9.15p8 for OS/2  :  REQUIRES emx 0.9b.
+
+
+Please read the file README, which contains general information about
+the configuration and use of Samba.
+
+
+Notes specific to OS/2 port:
+============================
+
+Filenames have been shortened to 8.3 in case anyone is using FAT.
+Files affected are:
+smb.conf  -> smb.cfg          smbclient -> smbclnt.exe
+smbstatus -> smbstat.exe      nmblookup -> nmblook.exe
+
+As I only use HPFS, I can't guarantee this will work on FAT systems,
+although I have tried to stick to 8.3 filenames.  I have noticed some
+temporary files being created with long filenames by smbd when I tried
+printing (which does not work yet anyway).  nmbd will not be able to
+create browse lists on FAT systems, as it uses temporary files with
+long file names.
+
+smb.cfg should be in the directory smbd is started from.  The path to
+smb.cfg is a compile time option, so if you are compiling from source
+you can set this to an absolute path to remove this restriction.
+
+User home directories not supported.  This doesn't make much sense on
+OS/2.  I haven't actually disabled anything, so if you try setting
+this up, behaivour is undefined.
+
+Password support is incomplete (I have found a crypt() routine, but 
+lack of passwd file support in the EMX libraries make support difficult
+without major changes).
+
+Printing does not appear to be working.  OS/2's lpq gives output in a
+different format than the versions of lpq already supported by samba.
+This will be easy to accomodate, but there is not much point until I can
+get lpr working properly.
+
+
+
+Source is available from the Samba WWW site :
+
+http://lake.canberra.edu.au/pub/samba/
+
+EMX 0.9b is available from hobbes.nmsu.edu, ftp.cdrom.com, ftp.leo.org and
+other OS/2 FTP sites.  emxrt.zip contains the required libraries.
+
+Bugs:
+=====
+
+Known problems:
+===============
+
+Printing does not work.  I have tried using REXX scripts with path info
+built in, and watched the processes startup properly but nothing comes
+out of the printer (remote via lpr in this case).
+If you can get it going, please let me know how you did it.
+
+The output from OS/2's lpq.exe is not understood by smbd, so all querys
+about the print queue say it is empty.  Printing doesn't work anyway,
+so I have not attempted to fix this yet.
+
+Temporary files are created with long filenames (when printing, and updating
+browse list)
+
+Bug reports for the OS/2 port should be sent to Jason Rumney <jasonr@pec.co.nz>.
+
+Change log:
+===========
+
+Changes from release 1 to release 2.
+
+nmblookup (nmblook.exe) is included, and works.
+
+An attempt at password support was made using the gnuufc crypt routines,
+but then I found that a lot of functions in the EMX libraries to do with
+passwd files don't actually do anything.
+
+Browse lists should now work if you use HPFS and set your lock directory
+to an absolute pathname.
diff --git a/docs/Warp.txt b/docs/Warp.txt
new file mode 100644
index 0000000000..9b8e6782ba
--- /dev/null
+++ b/docs/Warp.txt
@@ -0,0 +1,99 @@
+Here is some advice from maxfield@ctelcom.uucp.netcom.com (Wade Maxfie
+to use Samba with OS/2 Warp.
+
+Note that you may also find ftp://ftp.cdrom.com/pub/os2/new/os2net.faq
+useful.
+
+
+
+        Can I use Samba with Warp?
+
+        Yes.  The MSClient software at ftp.microsoft.com in the Bussys
+(lanman os2 directory) will work, sort of.  It is version 2.2c.
+
+        First, uncloack os2ver.  (attrib -h -r -s c:\os2ver).  It is a
+text file.  change netwksta.xxx to 20=netwksta.sys.  Also add
+20=setup.exe.  Another change will be needed, a .vdd file.  I remember
+it came up during the installation as being a wrong version.  I wrote
+the name down, changed os2ver to include it, and restarted the
+installation.
+
+ Here is a copy of my os2ver
+
+setup.exe
+netbios.os2
+nwifs.ifs
+netwksta.sys
+nwreq.sys
+netbios.sys
+ipx.sys
+netvdd.sys
+
+Re-cloak os2ver. (attrib +h +r +s c:\os2ver)
+
+Run the installation from an OS/2 Box.  Note that your mouse wont work,
+use the TAB key to move around, enter to select hilighted items.
+
+Here is a copy of my Config.sys file regarding the Laman entries.
+Note even though the version is 2.2c, it reports 2.2a in the text.
+
+REM ==== LANMAN 2.2a == DO NOT MODIFY BETWEEN THESE LINES == LANMAN 2.
+DEVICE=C:\LANMAN\DRIVERS\PROTMAN\PROTMAN.OS2 /i:C:\LANMAN
+DEVICE=C:\LANMAN\DRIVERS\ETHERNET\Ns2000\Ns2000.OS2
+RUN=C:\LANMAN\DRIVERS\PROTOCOL\tcpip\starttcp.exe
+RUN=C:\LANMAN\DRIVERS\PROTOCOL\tcpip\startnb.exe
+DEVICE=C:\LANMAN\DRIVERS\PROTOCOL\tcpip\tcpdrv.os2
+DEVICE=C:\LANMAN\DRIVERS\PROTOCOL\tcpip\nbdrv.os2
+DEVICE=C:\LANMAN\DRIVERS\PROTOCOL\tcpip\nmdrv.os2
+DEVICE=C:\LANMAN\arpa\sockdrv.os2
+DEVICE=C:\LANMAN\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.OS2
+DEVICE=C:\LANMAN\NETPROG\RDRHELP.SYS
+IFS=C:\LANMAN\NETPROG\NETWKSTA.SYS /i:C:\LANMAN
+DEVICE=C:\LANMAN\NETPROG\NETVDD.SYS
+REM ==== LANMAN 2.2a == DO NOT MODIFY BETWEEN THESE LINES == LANMAN 2.
+
+
+       If you have an NE2000 card, don't reboot, or you'll be sorry.
+enable the automatic backup mechanism for recovering old config.sys and
+other files in OS/2.  It paid for itself during this installation nightm
+before I knew better!)
+
+        Next, (or perhaps before this), if you have an NE2000 adaptor,
+get the ns2000 files from hobbes.nmsu.edu (in ns2000.zip).  I manually
+patched protocol.ini to refer to that adaptor, and copied it into my
+c:\lanman directory.  Note that I also modified the driver to be loaded
+in the config.sys to the ns2000.os2.  It might install as an "other"
+adaptor.
+
+      A command file "startup.cmd" is placed in c:\.  This file is
+automatically run when OS/2 Warp starts.
+Here is a copy of my startup file.  Note that Warp sometimes fails to
+login properly to the server.  I solve this by checking for the
+existance of a file, and rerunning the loing if that file fails to
+exist.
+
+@REM ==== LANMAN 2.2a == DO NOT MODIFY BETWEEN THESE LINES == LANMAN
+NET START WORKSTATION
+:relogin
+NET LOGON maxfield mypassword /y
+rem net use f: \\packard90\d$
+rem net use g: \\linuxone\cdromsdir
+rem net use h: \\linuxone\public
+:doOver
+if not exist f:\wildcat\wildcat.exe goto relogin
+@REM ==== LANMAN 2.2a == DO NOT MODIFY BETWEEN THESE LINES == LANMAN
+exit
+
+        Finally, the system expects to be on a domain with a domain
+server.  BTW, TCP/IP and NetBeui allow simultaneous communication with
+Os/2 lanserver 4.0, and Samba.  (Note: Lanserver 4.0 won't yet to
+TCP/IP.  (Well,it might, but it crashes before I get to that point, so I
+havent' been able to enable it))
+
+I have not yet tried with only a SAMBA server on the domain.
+
+    I would be glad to try to answer any questions at above e-mail
+address, if I can.
+
+wade
+
diff --git a/docs/samba.faq b/docs/samba.faq
new file mode 100644
index 0000000000..26570b7577
--- /dev/null
+++ b/docs/samba.faq
@@ -0,0 +1,398 @@
+
+                           Frequently Asked Questions
+
+                                    about the
+
+                                   SAMBA Suite
+
+                  (FAQ version 1.9.02, Samba version 1.09.02)
+
+-------------------------------------------------------------------------------
+
+This FAQ was originally prepared by Karl Auer (Karl.Auer@anu.edu.au) and is
+currently maintained by Paul Blackman (ictinus@lake.canberra.edu.au).
+
+As Karl originally said, 'this FAQ was prepared with lots of help from numerous
+net.helpers', and that's the way I'd like to keep it. So if you find anything
+that you think should be in here don't hesitate to contact me.
+
+Thanks to Karl for the work he's done, and continuing thanks to Andrew Tridgell
+for developing Samba.
+
+Note: This FAQ is (and probably always will be) under construction. Some
+sections exist only as optimistic entries in the Contents page.
+
+-------------------------------------------------------------------------------
+
+Contents
+
+     * SECTION ONE: General information
+          All about Samba - what it is, how to get it, related sources of
+          information.
+     * SECTION TWO: Compiling and installing Samba on a Unix host
+          Common problems that arise when building and installing Samba under
+          Unix.
+     * SECTION THREE: Common client problems
+          Common problems that arise when trying to communicate from a client
+          computer to a Samba server. All problems which have symptoms you see
+          at the client end will be in this section.
+     * SECTION FOUR: Specific client problems
+          This section covers problems that are specific to certain clients,
+          such as Windows for Workgroups or Windows NT. Please check Section
+          Three first!
+     * SECTION FIVE: Specific client application problems
+          This section covers problems that are specific to certain products,
+          such as Windows for Workgroups or Windows NT. Please check Sections
+          Three and Four first!
+     * SECTION SIX: Miscellaneous
+          All the questions that aren't classifiable into any other section.
+
+
+===============================================================================
+SECTION ONE: General information
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* 1: What is Samba?
+
+Samba is a suite of programs which work together to allow clients to access
+Unix filespace and printers via the SMB (Session Message Block) protocol.
+
+In practice, this means that you can redirect disks and printers to Unix disks
+and printers from Lan Manager clients, Windows for Workgroups 3.11 clients,
+Windows NT clients and OS/2 clients. There is also a Unix client program
+supplied as part of the suite which allows Unix users to use an ftp-like
+interface to access filespace and printers on any other SMB servers.
+
+The components of the suite are (in summary):
+
+     * smbd, the SMB server. This handles actual connections from clients
+     * nmbd, the Netbios name server, which helps clients locate servers
+     * smbclient, the Unix-hosted client program
+     * smbrun, a little 'glue' program to help the server run external
+         programs
+     * testprns, a program to test server access to printers
+     * testparms, a program to test the Samba configuration file for
+         correctness
+     * smb.conf, the Samba configuration file
+     * smbprint, a sample script to allow a Unix host to use smbclient to
+         print to an SMB server
+
+The suite is supplied with full source (of course!) and is GPLed.
+
+The primary creator of the Samba suite is Andrew Tridgell. Later versions
+incorporate much effort by many net.helpers. The man pages and this FAQ were
+written by Karl Auer.
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* 2: What is the current version of Samba?
+
+At time of writing, the current version was 1.9.12. If you want to be sure
+check the bottom of the change-log file. 
+(nimbus.anu.edu.au/pub/tridge/samba/change-log)
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* 3: Where can I get it?
+
+The Samba suite is available via anonymous ftp from nimbus.anu.edu.au. The
+latest and greatest versions of the suite are in the directory:
+
+/pub/tridge/samba/
+
+Development (read "alpha") versions, which are NOT necessarily stable and which
+do NOT necessarily have accurate documentation, are available in the directory:
+
+/pub/tridge/samba/alpha
+
+Note that binaries are NOT included in any of the above. Samba is distributed
+ONLY in source form, though binaries may be available from other sites. Recent
+versions of some Linux distributions, for example, do contain Samba binaries
+for that platform.
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* 4: What platforms are supported?
+
+Many different platforms have run Samba successfully. The platforms most widely
+used and thus best tested are Linux and SunOS.
+
+At time of writing, the Makefile claimed support for:
+
+     * SunOS
+     * Linux with shadow passwords
+     * Linux without shadow passwords
+     * SOLARIS
+     * SOLARIS 2.2 and above (aka SunOS 5)
+     * SVR4
+     * ULTRIX
+     * OSF1 (alpha only)
+     * OSF1 with NIS and Fast Crypt (alpha only)
+     * OSF1 V2.0 Enhanced Security (alpha only)
+     * AIX
+     * BSDI
+     * NetBSD
+     * NetBSD 1.0
+     * SEQUENT
+     * HP-UX
+     * SGI
+     * SGI IRIX 4.x.x
+     * SGI IRIX 5.x.x
+     * FreeBSD
+     * NeXT 3.2 and above
+     * NeXT OS 2.x
+     * NeXT OS 3.0
+     * ISC SVR3V4 (POSIX mode)
+     * ISC SVR3V4 (iBCS2 mode)
+     * A/UX 3.0
+     * SCO with shadow passwords.
+     * SCO with shadow passwords, without YP.
+     * SCO with TCB passwords
+     * SCO 3.2v2 (ODT 1.1) with TCP passwords
+     * intergraph
+     * DGUX
+     * Apollo Domain/OS sr10.3 (BSD4.3)
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* 5: How can I find out more about Samba?
+
+There are two mailing lists devoted to discussion of Samba-related matters.
+There is also the newsgroup, comp.protocols.smb, which has a great deal of
+discussion on Samba.
+
+Send email to listproc@anu.edu.au. Make sure the subject line is blank, and
+include the following two lines in the body of the message:
+
+      subscribe samba Firstname Lastname
+      subscribe samba-announce Firstname Lastname
+
+Obviously you should substitute YOUR first name for "Firstname" and YOUR last
+name for "Lastname"! Try not to send any signature stuff, it sometimes confuses
+the list processor.
+
+The samba list is a digest list - every eight hours or so it regurgitates a
+single message containing all the messages that have been received by the list
+since the last time and sends a copy of this message to all subscribers.
+
+If you stop being interested in Samba, please send another email to
+listproc@anu.edu.au. Make sure the subject line is blank, and include the
+following two lines in the body of the message:
+
+      unsubscribe samba
+      unsubscribe samba-announce
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* 6: Something's gone wrong - what should I do?
+
+[#] *** IMPORTANT! *** [#]
+DO NOT post messages on mailing lists or in newsgroups until you have carried
+out the first three steps given here!
+
+Firstly, see if there are any likely looking entries in this FAQ!
+
+Secondly, read the man pages for smbd, nmbd and smb.conf, looking for topics
+that relate to what you are trying to do.
+
+Thirdly, if there is no obvious solution to hand, try to get a look at the log
+files for smbd and/or nmbd for the period during which you were having
+problems. You may need to reconfigure the servers to provide more extensive
+debugging information - usually level 2 or level 3 provide ample debugging
+info. Inspect these logs closely, looking particularly for the string "Error:".
+
+If you successfully solve a problem, please mail me a succinct description of
+the symptom, the problem and the solution, so I can incorporate it in the next
+version of the FAQ.
+
+
+===============================================================================
+SECTION TWO: Compiling and installing Samba on a Unix host
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+
+===============================================================================
+SECTION THREE: Common client problems
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* 1: I can't see the Samba server in any browse lists!
+
+*** Until the FAQ can be updated, please check the file:
+*** ftp://nimbus.anu.adu.au/pub/tridge/samba/BROWSING.txt
+*** for more information on browsing. 
+
+If your GUI client does not permit you to select non-browsable servers, you may
+need to do so on the command line. For example, under Lan Manager you might
+connect to the above service as disk drive M: thusly:
+
+   net use M: \\mary\fred
+
+The details of how to do this and the specific syntax varies from client to
+client - check your client's documentation.
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* 2: Some files that I KNOW are on the server doesn't show up when I view the
+directories from my client!
+
+If you check what files are not showing up, you will note that they are files
+which contain upper case letters or which are otherwise not DOS-compatible (ie,
+they are not legal DOS filenames for some reason).
+
+The Samba server can be configured either to ignore such files completely, or
+to present them to the client in "mangled" form. If you are not seeing the
+files at all, the Samba server has most likely been configured to ignore them.
+Consult the man page smb.conf(5) for details of how to change this - the
+parameter you need to set is "mangled names = yes".
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* 3: Some files on the server show up with really wierd filenames when I view
+the directories from my client!
+
+If you check what files are showing up wierd, you will note that they are files
+which contain upper case letters or which are otherwise not DOS-compatible (ie,
+they are not legal DOS filenames for some reason).
+
+The Samba server can be configured either to ignore such files completely, or
+to present them to the client in "mangled" form. If you are seeing strange file
+names, they are most likely "mangled". If you would prefer to have such files
+ignored rather than presented in "mangled" form, consult the man page
+smb.conf(5) for details of how to change the server configuration - the
+parameter you need to set is "mangled names = no".
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* 4: My client reports "cannot locate specified computer" or similar.
+
+This indicates one of three things: You supplied an incorrect server name, the
+underlying TCP/IP layer is not working correctly, or the name you specified
+cannot be resolved.
+
+After carefully checking that the name you typed is the name you should have
+typed, try doing things like pinging a host or telnetting to somewhere on your
+network to see if TCP/IP is functioning OK. If it is, the problem is most
+likely name resolution.
+
+If your client has a facility to do so, hardcode a mapping between the hosts IP
+and the name you want to use. For example, with Man Manager or Windows for
+Workgroups you would put a suitable entry in the file LMHOSTS. If this works,
+the problem is in the communication between your client and the netbios name
+server. If it does not work, then there is something fundamental wrong with
+your naming and the solution is beyond the scope of this document.
+
+If you do not have any server on your subnet supplying netbios name resolution,
+hardcoded mappings are your only option. If you DO have a netbios name server
+running (such as the Samba suite's nmbd program), the problem probably lies in
+the way it is set up. Refer to Section Two of this FAQ for more ideas.
+
+By the way, remember to REMOVE the hardcoded mapping before further tests :-)
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* 5: My client reports "cannot locate specified share name" or similar.
+
+This message indicates that your client CAN locate the specified server, which
+is a good start, but that it cannot find a service of the name you gave.
+
+The first step is to check the exact name of the service you are trying to
+connect to (consult your system administrator). Assuming it exists and you
+specified it correctly (read your client's doco on how to specify a service
+name correctly), read on:
+
+     * Many clients cannot accept or use service names longer than eight
+         characters.
+     * Many clients cannot accept or use service names containing spaces.
+     * Some servers (not Samba though) are case sensitive with service names.
+     * Some clients force service names into upper case.
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* 6: My client reports "cannot find domain controller", "cannot log on to the
+network" or similar.
+
+Nothing is wrong - Samba does not implement the primary domain name controller
+stuff for several reasons, including the fact that the whole concept of a
+primary domain controller and "logging in to a network" doesn't fit well with
+clients possibly running on multiuser machines (such as users of smbclient
+under Unix).
+
+Seeing this message should not affect your ability to mount redirected disks
+and printers, which is really what all this is about.
+
+For many clients (including Windows for Workgroups and Lan Manager), setting
+the domain to STANDALONE at least gets rid of the message.
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* 7: Printing doesn't work :-(
+
+Make sure that the specified print command for the service you are connecting
+to is correct and that it has a fully-qualified path (eg., use "/usr/bin/lpr"
+rather than just "lpr").
+
+Make sure that the spool directory specified for the service is writable by the
+user connected to the service. In particular the user "nobody" often has
+problems with printing, even if it worked with an earlier version of Samba. Try
+creating another guest user other than "nobody".
+
+Make sure that the user specified in the service is permitted to use the
+printer.
+
+Check the debug log produced by smbd. Search for the printer name and see if
+the log turns up any clues. Note that error messages to do with a service ipc$
+are meaningless - they relate to the way the client attempts to retrieve status
+information when using the LANMAN1 protocol.
+
+If using WfWg then you need to set the default protocol to TCP/IP, not Netbeui.
+This is a WfWg bug.
+
+If using the Lanman1 protocol (the default) then try switching to coreplus.
+Also not that print status error messages don't mean printing won't work. The
+print status is received by a different mechanism.
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* 8: My programs install on the server OK, but refuse to work properly.
+
+There are numerous possible reasons for this, but one MAJOR possibility is that
+your software uses locking. Make sure you are using Samba 1.6.11 or later. It
+may also be possible to work around the problem by setting "locking=no" in the
+Samba configuration file for the service the software is installed on. This
+should be regarded as a strictly temporary solution.
+
+In earlier Samba versions there were some difficulties with the very latest
+Microsoft products, particularly Excel 5 and Word for Windows 6. These should
+have all been solved. If not then please let Andrew Tridgell know.
+
+
+===============================================================================
+SECTION FOUR: Specific client problems
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+* 1: Are any MacIntosh clients for Samba.
+
+In Rob Newberry's words (rob@eats.com, Sun, 4 Dec 1994):
+
+The answer is "No." Samba speaks SMB, the protocol used for Microsoft networks.
+The Macintosh has ALWAYS spoken Appletalk. Even with Microsoft "services for
+Macintosh", it has been a matter of making the server speak Appletalk. It is
+the same for Novell Netware and the Macintosh, although I believe Novell has
+(VERY LATE) released an extension for the Mac to let it speak IPX.
+
+In future Apple System Software, you may see support for other protocols, such
+as SMB -- Applet is working on a new networking architecture that will make it
+easier to support additional protocols. But it's not here yet.
+
+Now, the nice part is that if you want your Unix machine to speak Appletalk,
+there are several options. "Netatalk" and "CAP" are free, and available on the
+net. There are also several commercial options, such as "PacerShare" and
+"Helios" (I think). In any case, you'll have to look around for a server, not
+anything for the Mac.
+
+Depending on you OS, some of these may not help you. I am currently
+coordinating the effort to get CAP working with Native Ethertalk under Linux,
+but we're not done yet.
+
+Rob
+
+
+===============================================================================
+SECTION FIVE: Specific client application problems
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+
+===============================================================================
+SECTION SIX: Miscellaneous
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Maintained By Paul Blackman, Email:ictinus@lake.canberra.edu.au
+
+
diff --git a/source3/loadparm.h b/source3/loadparm.h
new file mode 100644
index 0000000000..513dbcd636
--- /dev/null
+++ b/source3/loadparm.h
@@ -0,0 +1,160 @@
+/* 
+   Unix SMB/Netbios implementation.
+   Version 1.9.
+   Parameter loading functions
+   Copyright (C) Karl Auer 1993, 1994
+
+   Extensively modified by Andrew Tridgell
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+ *
+ * Prototypes etc for loadparm.c.
+ *
+ */
+#ifndef _LOADPARM_H
+#define _LOADPARM_H
+
+#include "smb.h"
+
+extern BOOL lp_file_list_changed(void);
+extern void lp_killunused(BOOL (*snumused)(int ));
+extern BOOL lp_loaded(void);
+extern BOOL lp_snum_ok(int iService);
+extern BOOL lp_manglednames(int iService);
+extern char *lp_passwordserver(void);
+extern char *lp_passwd_program(void);
+extern char *lp_passwd_chat(void);
+extern char *lp_guestaccount(int iService);
+extern char *lp_printcapname(void);
+extern char *lp_lockdir(void);
+extern char *lp_logfile(void);
+extern char *lp_configfile(void);
+extern char *lp_smb_passwd_file(void);
+extern char *lp_rootdir(void);
+extern char *lp_defaultservice(void);
+extern char *lp_serverstring(void);
+extern char *lp_dfree_command(void);
+extern char *lp_msg_command(void);
+extern char *lp_workgroup(void);
+extern char *lp_domain_controller(void);
+extern char *lp_username_map(void);
+extern char *lp_hosts_equiv(void);
+extern char *lp_logon_script(void);
+extern char *lp_magicscript(int iService);
+extern char *lp_magicoutput(int iService);
+extern char *lp_mangled_map(int iService);
+char *volume_label(int snum);
+extern int  lp_os_level(void);
+extern int  lp_max_ttl(void);
+extern int  lp_max_log_size(void);
+extern int  lp_maxxmit(void);
+extern int  lp_maxmux(void);
+extern int  lp_mangledstack(void);
+extern BOOL lp_preferred_master(void);
+extern BOOL lp_domain_master(void);
+extern BOOL lp_domain_logons(void);
+extern BOOL lp_getwdcache(void);
+extern BOOL lp_use_rhosts(void);
+extern BOOL lp_readprediction(void);
+extern BOOL lp_readbmpx(void);
+extern BOOL lp_readraw(void);
+extern BOOL lp_writeraw(void);
+extern BOOL lp_null_passwords(void);
+extern BOOL lp_strip_dot(void);
+extern BOOL lp_encrypted_passwords(void);
+extern BOOL lp_syslog_only(void);
+extern BOOL lp_browse_list(void);
+extern int  lp_numservices(void);
+extern int  lp_keepalive(void);
+extern int  lp_passwordlevel(void);
+extern int  lp_security(void);
+extern int  lp_printing(void);
+extern int  lp_maxdisksize(void);
+extern int  lp_lpqcachetime(void);
+extern int  lp_syslog(void);
+extern int  lp_deadtime(void);
+extern int  lp_debuglevel(void);
+extern int  lp_maxprotocol(void);
+extern int  lp_maxpacket(void);
+extern char *lp_comment(int iService);
+extern char *lp_preexec(int iService);
+extern char *lp_postexec(int iService);
+extern char *lp_rootpreexec(int iService);
+extern char *lp_rootpostexec(int iService);
+extern char *lp_servicename(int iService);
+extern char *lp_pathname(int iService);
+extern char *lp_username(int iService);
+extern char *lp_invalid_users(int iService);
+extern char *lp_valid_users(int iService);
+extern char *lp_admin_users(int iService);
+extern char *lp_printcommand(int iService);
+extern char *lp_lpqcommand(int iService);
+extern char *lp_lprmcommand(int iService);
+extern char *lp_lppausecommand(int iService);
+extern char *lp_lpresumecommand(int iService);
+extern char *lp_printername(int iService);
+extern char *lp_hostsallow(int iService);
+extern char *lp_hostsdeny(int iService);
+extern char *lp_dontdescend(int iService);
+extern char *lp_force_user(int iService);
+extern char *lp_force_group(int iService);
+extern char *lp_readlist(int iService);
+extern char *lp_writelist(int iService);
+extern BOOL lp_alternate_permissions(int iService);
+extern BOOL lp_revalidate(int iService);
+extern BOOL lp_status(int iService);
+extern BOOL lp_hide_dot_files(int iService);
+extern BOOL lp_browseable(int iService);
+extern BOOL lp_widelinks(int iService);
+extern BOOL lp_syncalways(int iService);
+extern BOOL lp_readonly(int iService);
+extern BOOL lp_no_set_dir(int iService);
+extern BOOL lp_guest_ok(int iService);
+extern BOOL lp_guest_only(int iService);
+extern BOOL lp_print_ok(int iService);
+extern BOOL lp_postscript(int iService);
+extern BOOL lp_map_hidden(int iService);
+extern BOOL lp_map_archive(int iService);
+extern BOOL lp_locking(int iService);
+extern BOOL lp_strict_locking(int iService);
+extern BOOL lp_share_modes(int iService);
+extern BOOL lp_onlyuser(int iService);
+extern BOOL lp_map_system(int iService);
+extern BOOL lp_casesensitive(int iService);
+extern BOOL lp_casemangle(int iService);
+extern BOOL lp_preservecase(int iService);
+extern BOOL lp_shortpreservecase(int iService);
+extern BOOL lp_load(char *pszFname,BOOL global_only);
+extern void lp_dump(void);
+extern int  lp_servicenumber(char *pszServiceName);
+extern BOOL lp_add_home(char *pszHomename, 
+                        int iDefaultService, char *pszHomedir);
+extern int lp_add_service(char *service, int iDefaultService);
+extern BOOL lp_add_printer(char *pszPrintername, int iDefaultService);
+extern BOOL lp_readonly(int iService);
+extern int lp_create_mode(int iService);
+extern int lp_minprintspace(int iService);
+extern int lp_defaultcase(int iService);
+extern char lp_magicchar(int iService);
+extern int lp_max_connections(int iService);
+extern BOOL lp_add_home(char *pservice,int ifrom,char *phome);
+extern char *lp_string(char *s);
+char *my_workgroup(void);
+
+#endif
+
diff --git a/source3/params.h b/source3/params.h
new file mode 100644
index 0000000000..253eaa4e7a
--- /dev/null
+++ b/source3/params.h
@@ -0,0 +1,45 @@
+/* 
+   Unix SMB/Netbios implementation.
+   Version 1.9.
+   Parameter loading utilities
+   Copyright (C) Karl Auer 1993, 1994
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/**************************************************************************
+PARAMS.H
+
+Copyright (C) 1990, 1991, 1992 Karl Auer
+
+Prototypes and definitions for PARAMS.C.
+**************************************************************************/
+#ifndef _PARAMS_H
+#define _PARAMS_H
+
+#include <stdio.h>
+#include "smb.h"
+
+typedef BOOL (* PM_PARMFUNC)(char *pszParmName, char *pszParmValue);
+typedef BOOL (* PM_SECFUNC)(char *pszSectionName);
+
+#define PM_NOFILE               1
+#define PM_NOFILENAME           2
+#define PM_FILEERROR            3
+
+extern BOOL pm_process(char *pszFileName, PM_SECFUNC sfunc, PM_PARMFUNC pfunc);
+
+#endif
+
diff --git a/source3/pcap.h b/source3/pcap.h
new file mode 100644
index 0000000000..89ab359af6
--- /dev/null
+++ b/source3/pcap.h
@@ -0,0 +1,35 @@
+/* 
+   Unix SMB/Netbios implementation.
+   Version 1.9.
+   printcap parsing
+   Copyright (C) Karl Auer 1993, 1994
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+ *
+ * Prototypes etc for pcap.c.
+ *
+ */
+#ifndef _PCAP_H
+#define _PCAP_H
+
+#include "smb.h"
+
+extern BOOL pcap_printername_ok(char *pszPrintername, char *pszPrintcapname);
+extern void pcap_printer_fn(void (*fn)());
+
+#endif
diff --git a/source3/reply.h b/source3/reply.h
new file mode 100644
index 0000000000..f88229436f
--- /dev/null
+++ b/source3/reply.h
@@ -0,0 +1,60 @@
+int reply_special(char *inbuf,char *outbuf);
+int reply_corep(char *outbuf);
+int reply_coreplus(char *outbuf);
+int reply_nt1(char *outbuf);
+int reply_lanman1(char *outbuf);
+int reply_lanman2(char *outbuf);
+int reply_tcon(char *inbuf,char *outbuf);
+int reply_tcon_and_X(char *inbuf,char *outbuf,int length,int bufsize);
+int reply_unknown(char *inbuf,char *outbuf);
+int reply_ioctl(char *inbuf,char *outbuf);
+int reply_sesssetup_and_X(char *inbuf,char *outbuf,int length,int bufsize);
+int reply_chkpth(char *inbuf,char *outbuf);
+int reply_getatr(char *inbuf,char *outbuf);
+int reply_setatr(char *inbuf,char *outbuf);
+int reply_dskattr(char *inbuf,char *outbuf);
+int reply_search(char *inbuf,char *outbuf);
+int reply_fclose(char *inbuf,char *outbuf);
+int reply_open(char *inbuf,char *outbuf);
+int reply_open_and_X(char *inbuf,char *outbuf,int length,int bufsize);
+int reply_ulogoffX(char *inbuf,char *outbuf,int length,int bufsize);
+int reply_mknew(char *inbuf,char *outbuf);
+int reply_ctemp(char *inbuf,char *outbuf);
+int reply_unlink(char *inbuf,char *outbuf);
+int reply_readbraw(char *inbuf, char *outbuf);
+int reply_lockread(char *inbuf,char *outbuf);
+int reply_read(char *inbuf,char *outbuf);
+int reply_read_and_X(char *inbuf,char *outbuf,int length,int bufsize);
+int reply_writebraw(char *inbuf,char *outbuf);
+int reply_writeunlock(char *inbuf,char *outbuf);
+int reply_write(char *inbuf,char *outbuf,int dum1,int dum2);
+int reply_write_and_X(char *inbuf,char *outbuf,int length,int bufsize);
+int reply_lseek(char *inbuf,char *outbuf);
+int reply_flush(char *inbuf,char *outbuf);
+int reply_exit(char *inbuf,char *outbuf);
+int reply_close(char *inbuf,char *outbuf);
+int reply_writeclose(char *inbuf,char *outbuf);
+int reply_lock(char *inbuf,char *outbuf);
+int reply_unlock(char *inbuf,char *outbuf);
+int reply_tdis(char *inbuf,char *outbuf);
+int reply_echo(char *inbuf,char *outbuf);
+int reply_printopen(char *inbuf,char *outbuf);
+int reply_printclose(char *inbuf,char *outbuf);
+int reply_printqueue(char *inbuf,char *outbuf);
+int reply_printwrite(char *inbuf,char *outbuf);
+int reply_mkdir(char *inbuf,char *outbuf);
+int reply_rmdir(char *inbuf,char *outbuf);
+int reply_mv(char *inbuf,char *outbuf);
+int reply_copy(char *inbuf,char *outbuf);
+int reply_setdir(char *inbuf,char *outbuf);
+int reply_lockingX(char *inbuf,char *outbuf,int length,int bufsize);
+int reply_readbmpx(char *inbuf,char *outbuf,int length,int bufsize);
+int reply_writebmpx(char *inbuf,char *outbuf);
+int reply_setattrE(char *inbuf,char *outbuf);
+int reply_getattrE(char *inbuf,char *outbuf);
+int reply_writebs(char *inbuf,char *outbuf);
+int reply_sends(char *inbuf,char *outbuf);
+int reply_sendstrt(char *inbuf,char *outbuf);
+int reply_sendend(char *inbuf,char *outbuf);
+int reply_sendtxt(char *inbuf,char *outbuf);
+int reply_transs2(char *inbuf,char *outbuf,int length,int bufsize);
diff --git a/source3/smbpass.h b/source3/smbpass.h
new file mode 100644
index 0000000000..6ddca0b92d
--- /dev/null
+++ b/source3/smbpass.h
@@ -0,0 +1,50 @@
+#ifndef _SMBPASS_H_
+#define _SMBPASS_H_
+/* 
+   Unix SMB/Netbios implementation.
+   Version 1.9.
+   SMB parameters and setup
+   Copyright (C) Jeremy Allison 1995
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+struct smb_passwd {
+	int smb_userid;
+	char *smb_name;
+	unsigned char *smb_passwd; /* Null if no password */
+	unsigned char *smb_nt_passwd; /* Null if no password */
+	/* Other fields / flags may be added later */
+};
+
+/* Return a smb_passwd struct given a user name, 0 if fails. */
+struct smb_passwd *get_smbpwnam(char *user);
+
+#ifndef uchar
+#define uchar unsigned char
+#endif
+
+/* SMB Encryption functions. */
+void str_to_key(unsigned char *str,unsigned char *key);
+void E_P16(uchar *p14,uchar *p16);
+void E_P24(unsigned char *p21, unsigned char *c8, unsigned char *p24);
+void E_md4hash(uchar *passwd,uchar *p16);
+void SMBencrypt(unsigned char *passwd, unsigned char *c8, unsigned char *p24);
+void SMB_nt_encrypt(unsigned char *passwd, unsigned char *c8, unsigned char *p24);
+
+/* Password file lock/unlock routines */
+int pw_file_lock(char *name, int type, int secs);
+int pw_file_unlock(int fd);
+#endif
diff --git a/source3/sockspy.c b/source3/sockspy.c
new file mode 100644
index 0000000000..806b737915
--- /dev/null
+++ b/source3/sockspy.c
@@ -0,0 +1,302 @@
+/*
+ USAGE
+   sockspy desthost destservice
+
+You install this program in /etc/inetd.conf and /etc/services
+
+For example I have used these entries:
+
+/etc/services:
+spy		8001/tcp	spy port
+
+/etc/inetd.conf:
+spy stream tcp nowait tridge /usr/local/smb/sockspy sockspy fjall netbios-ssn
+
+This means any connection to port 8001 will be redirected to
+netbios-ssn on fjall. By playing with these parameters you can easily
+spy on most of the tcp protocols. All packets traversing the link will
+be captured.
+
+NOTE: This program is totally unsupported. I haven't used it for 2
+years, and don't intend to fix the obvious bugs/limitations. I will,
+however, accept contributed patches - or even a total rewrite :-)
+*/
+
+#include <stdio.h>
+#include <strings.h>
+#include <sys/types.h>
+#include <sys/dir.h>
+#include <sys/socket.h>
+#include <sys/ioctl.h>
+#include <netinet/in.h>
+#include <netdb.h>
+
+#include <signal.h>
+
+#include <errno.h>
+#include <sysexits.h>
+
+int trans_num = 0;
+
+#ifndef LOGIN
+#define LOGIN "/tmp/spy.in"
+#endif
+
+#ifndef LOGOUT
+#define LOGOUT "/tmp/spy.out"
+#endif
+
+#ifndef LOGCMD
+#define LOGCMD "/tmp/spy.cmd"
+#endif
+
+FILE *cmd = NULL;
+FILE *login = NULL;
+FILE *logout = NULL;
+
+#define      STREQL(a, b)        (strcmp(a, b) == 0)
+#define      NIL                 (0)
+
+char      DestHost[256];    /* Remote system to connect to         */
+char      DestObj[256];     /* Remote object/service to connect to */
+
+/* Signal handler for SIGPIPE (write on a disconnected socket) */
+abort()
+{
+  if (cmd)
+    {
+      fprintf(cmd,"writing to disconnected socket!\n");
+      fflush(cmd);
+    }
+    exit(1);
+}
+
+
+main(argc, argv)
+int    argc;           /* # of command line arguments */
+char   *argv[];        /* the command line arguments  */
+{
+  int      client,       /* Socket connected to client  */
+  server;       /* Socket to use for server    */
+
+  trans_num = 0;
+#ifndef NOLOG
+  login = fopen(LOGIN,"w");
+  logout = fopen(LOGOUT,"w");
+  cmd = fopen(LOGCMD,"w");
+#endif
+
+  if (cmd)
+    {
+      fprintf(cmd,"Started server\n");
+      fflush(cmd);
+    }
+
+  /* Check usage */
+  if(argc != 3)
+    return;
+
+  strcpy(DestHost,argv[1]);
+  strcpy(DestObj,argv[2]);
+  
+  /* Time to attempt the connection */
+  server = inet_conn(DestHost, DestObj);
+
+  if( server < 0 ) {
+    exit(EX_CANTCREAT);
+  }
+
+  /* Just to make the code more readable */
+  client = 0;
+  
+  /* We will abort gracefully when the client or remote system 
+     goes away */
+  signal(SIGPIPE, abort);
+  
+  /* Now just go and move raw data between client and 
+     remote system */
+  dowork(client, server);
+  /* ... NEVER RETURNS ... */
+}
+
+dowork(client, server)
+     int    client, server;      
+{
+  
+  /* select(2) masks for client and remote */
+  int      ClientMask, ServerMask;
+  
+  /* Combined ClientMask and ServerMask */
+  int      ReadMask;
+
+  /* Initialize select(2) masks */
+  ClientMask = 1<<client;
+  ServerMask = 1<<server;
+  
+  ReadMask = ClientMask | ServerMask;
+  
+  /* Now move raw data for the rest of our life between 
+     client and remote */
+  for( ; ; ) {
+    /* Local Variables */
+    int  SelectReadMask;/* select(2) mask modifiable by select(2) */
+    int  nready;        /* status return from select(2)           */
+    
+    do {
+      /* Intialize select(2) mask everytime
+	 as select(2) always modifies it */
+      SelectReadMask = ReadMask;
+      
+      /* Wait for data to be present to be moved */
+      errno = 0;
+      nready = select(32,&SelectReadMask,(int *)0,(int *)0,NIL);
+    } while( nready < 0  &&  errno == EINTR );
+
+    /* select(2) failed, shouldn't happen.  Exit abnormally */
+    if( nready < 0 )
+      exit(EX_SOFTWARE);
+    
+    /* Favor the client (for no particular reason) 
+       if s/he is has data */
+    if( SelectReadMask & ClientMask )      
+      {
+	if (cmd)
+	  fprintf(cmd,"client %d\n",nready);
+	xfer(client, server,login);
+      }
+    
+    /* Then check on the other guy */
+    if( SelectReadMask & ServerMask )
+      {
+	if (cmd)
+	  fprintf(cmd,"server %d\n",nready);
+	xfer(server, client,logout);
+      }
+  }
+
+    /* NEVER REACHED */
+}
+
+#define      BUFSIZE        20000 /* Max bytes to move at a time */
+
+xfer(from, to,file)
+     int      from, to;        /* Move data from "from" to "to" */
+     FILE *file;
+{
+  static char buf[BUFSIZE];      /* Buffer data to be moved      */
+  int      nready;               /* # bytes readable             */
+  int      got;                  /* # bytes actually being moved */
+  int ret;
+  
+  /* Query the system how many bytes are ready to be read */
+  ioctl(from, FIONREAD, &nready);
+  
+  if (cmd)
+    fprintf(cmd,"nready = %d\n",nready);
+  
+  /* Only try to get the smaller of nready and BUFSIZE */
+  got = read(from, buf, nready < BUFSIZE ? nready : BUFSIZE);
+
+  /* Zero bytes returned indicates end of stream, exit gracefully */
+  if( got == 0 )
+    {
+      if (cmd)
+	{
+	  fprintf(cmd,"read 0 bytes exiting\n");
+	  fflush(cmd);
+	}
+      if (login)
+	fclose(login);
+      if (logout)
+	fclose(logout);
+      if (cmd)
+	fclose(cmd);
+      exit(EX_OK);
+    }
+  
+  
+  if (file)
+    {
+      fprintf(file,"\nTransaction %d\n",trans_num);
+      fwrite(buf,got,1,file);
+      fflush(file);
+    }
+  trans_num++;
+  
+  /* Now send it accross to the other side */
+  ret = write(to, buf, got);
+  
+  if (cmd)
+    {
+      fprintf(cmd,"wrote %d\n",ret);
+      if (ret < 0)
+	fprintf(cmd,"error = %s\n",strerror(errno));
+    }
+}
+
+int
+inet_conn(host, port)
+    char *host;
+    char *port;
+{
+  /* Local Vars */
+  int                sock;      /* Socket to use for the connection */
+  struct hostent     *hostent;  /* Destination host entry           */
+  struct servent     *servent;  /* Destination service entry        */
+  struct sockaddr_in addr;      /* Formated destination for connect */
+  
+  /* Fetch the requested host and service entries */
+  hostent = gethostbyname(host);
+  if (isdigit(*port))
+    servent = getservbyport(80, "tcp");
+  else
+    servent = getservbyname(port, "tcp");
+
+  
+  if (cmd)
+    {
+      fprintf(cmd,"inet_conn %s %s\n",host,port);
+  
+      if (servent == NULL)
+	fprintf(cmd,"servent is NIL\n");
+      if (hostent == NULL)
+	fprintf(cmd,"hostent is NIL\n");
+      if (hostent->h_addrtype != AF_INET)
+	fprintf(cmd,"not inet type\n");
+      fflush(cmd);
+    }
+
+
+  /* No host entry, no service entry, or host is not 
+     Internet, error! */
+  if( servent == NIL || 
+     hostent == NIL || 
+     hostent->h_addrtype != AF_INET )
+    return -1;
+  
+  /* Get a socket from the system to use for the connection */
+  if( (sock = socket(AF_INET, SOCK_STREAM, 0)) < 0 )
+    return -1;
+  
+  /* Make sure we start with a clean address structure ... */
+  bzero(&addr, sizeof(addr));
+  
+  /* ... then fill in the required fields */
+  addr.sin_family = AF_INET;
+  addr.sin_port   = servent->s_port;
+  bcopy(hostent->h_addr, &addr.sin_addr, hostent->h_length);
+  
+  /* Now try to connection to the destination */
+  if( connect(sock, &addr, sizeof(addr)) < 0 ) {
+    /* No go, release the socket, and then return error! */
+    close(sock);
+    return -1;
+  }
+  
+  /* Success.  Return the connected socket descriptor */
+  if (cmd)
+    fprintf(cmd,"returning %d\n",sock);
+  return sock;
+}
+
+