Update.

(This used to be commit cff77db9f811ab6690c1c0ef49e225c69030d64b)

2 files changed, 242 insertions, 293 deletions

diff --git a/docs/Samba3-ByExample/SBE-MigrateNW4Samba3.xml b/docs/Samba3-ByExample/SBE-MigrateNW4Samba3.xml
index 7b290c6de7..215eb1810c 100644
--- a/docs/Samba3-ByExample/SBE-MigrateNW4Samba3.xml
+++ b/docs/Samba3-ByExample/SBE-MigrateNW4Samba3.xml
@@ -324,7 +324,7 @@ done
 		<member><para>samba-3.0.20 or later</para></member>
 		<member><para>samba-client-3.0.20 or later</para></member>
 		<member><para>samba-winbind-3.0.20 or later</para></member>
-		<member><para>smbldap-tools Version 0.8.8</para></member>
+		<member><para>smbldap-tools Version 0.9.1</para></member>
 	</simplelist>
 
 	<para>
diff --git a/docs/Samba3-HOWTO/TOSHARG-VFS.xml b/docs/Samba3-HOWTO/TOSHARG-VFS.xml
index 0ccc1188fe..c0ab921000 100644
--- a/docs/Samba3-HOWTO/TOSHARG-VFS.xml
+++ b/docs/Samba3-HOWTO/TOSHARG-VFS.xml
@@ -16,10 +16,10 @@
 <title>Features and Benefits</title>
 
 <para>
-Since Samba-3, there is support for stackable VFS (Virtual File System) modules. 
-Samba passes each request to access the UNIX file system through the loaded VFS modules. 
-This chapter covers all the modules that come with the Samba source and references to 
-some external modules.
+<indexterm><primary></primary></indexterm>
+Stackable VFS (Virtual File System) modules support was new to Samba-3 and has proven quite popular.  Samba
+passes each request to access the UNIX file system through the loaded VFS modules.  This chapter covers the
+modules that come with the Samba source and provides references to some external modules.
 </para>
 
 
@@ -29,16 +29,17 @@ some external modules.
 <title>Discussion</title>
 
 <para>
-If not supplied with your platform distribution binary Samba package you may have problems
-compiling these modules, as shared libraries are compiled and linked in different ways
-on different systems. They currently have been tested against GNU/Linux and IRIX.
+If not supplied with your platform distribution binary Samba package you may have problems compiling these
+modules, as shared libraries are compiled and linked in different ways on different systems. They currently
+have been tested against GNU/Linux and IRIX.
 </para>
 
 <para>
-To use the VFS modules, create a share similar to the one below. The
-important parameter is the <smbconfoption name="vfs objects"/> parameter where
-you can list one or more VFS modules by name. For example, to log all access 
-to files and put deleted files in a recycle bin, see <link linkend="vfsrecyc">next configuration</link>:
+To use the VFS modules, create a share similar to the one below. The important parameter is the <smbconfoption
+name="vfs objects"/> parameter where you can list one or more VFS modules by name. For example, to log all
+access to files and put deleted files in a recycle bin, see <link linkend="vfsrecyc">the smb.conf with VFS
+modules example</link>:
+</para>
 
 <example id="vfsrecyc">
 	<title>smb.conf with VFS modules</title>
@@ -51,26 +52,23 @@ to files and put deleted files in a recycle bin, see <link linkend="vfsrecyc">ne
 <smbconfoption name="browseable">yes</smbconfoption>
 	</smbconfblock>
 </example>
-</para>
 
 <para>
-The modules are used in the order in which they are specified.
-Let's say that you want to both have a virus scanner module and a recycle
-bin module. It is wise to put the virus scanner module as the first one so
-that it is the first that get run an may detect a virus immediately, before
-any action is performed on that file.
+The modules are used in the order in which they are specified.  Let's say that you want to both have a virus
+scanner module and a recycle bin module. It is wise to put the virus scanner module as the first one so that
+it is the first that get run an may detect a virus immediately, before any action is performed on that file.
 <smbconfoption name="vfs objects">vscan-clamav recycle</smbconfoption>
 </para>
 
 <para>
 Samba will attempt to load modules from the <filename>/lib</filename> directory in the root directory of the
-Samba installation (usually <filename>/usr/lib/samba/vfs</filename> or <filename>/usr/local/samba/lib/vfs
-</filename>).
+Samba installation (usually <filename>/usr/lib/samba/vfs</filename> or
+<filename>/usr/local/samba/lib/vfs</filename>).
 </para>
 
 <para>
-Some modules can be used twice for the same share.
-This can be done using a configuration similar to the one shown in <link linkend="multimodule">the following example</link>.
+Some modules can be used twice for the same share.  This can be done using a configuration similar to the one
+shown in <link linkend="multimodule">the smb.conf with multiple VFS modules</link>.
 
 <example id="multimodule">
 	<title>smb.conf with multiple VFS modules</title>
@@ -83,7 +81,7 @@ This can be done using a configuration similar to the one shown in <link linkend
 <smbconfoption name="vfs objects">example:example1 example example:test</smbconfoption>
 <smbconfoption name="example1: parameter">1</smbconfoption>
 <smbconfoption name="example:  parameter">5</smbconfoption>
-<smbconfoption name="test:	  parameter">7</smbconfoption>
+<smbconfoption name="test:     parameter">7</smbconfoption>
 </smbconfblock>
 </example>
 </para>
@@ -194,11 +192,11 @@ This can be done using a configuration similar to the one shown in <link linkend
 		</para>
 
 		<para>
-		The <guiicon>Recycle Bin</guiicon> will not appear in <application>Windows Explorer</application> views of the network file system
-		(share) nor on any mapped drive. Instead, a directory called <filename>.recycle</filename> will be
-		automatically created when the first file is deleted. Users can recover files from the 
-		<filename>.recycle</filename> directory. If the <parameter>recycle:keeptree</parameter> has been
-		specified, deleted files will be found in a path identical with that from which the file was deleted.
+		The <guiicon>Recycle Bin</guiicon> will not appear in <application>Windows Explorer</application> views of the
+		network file system (share) nor on any mapped drive. Instead, a directory called <filename>.recycle</filename>
+		will be automatically created when the first file is deleted. Users can recover files from the
+		<filename>.recycle</filename> directory. If the <parameter>recycle:keeptree</parameter> has been specified,
+		deleted files will be found in a path identical with that from which the file was deleted.
 		</para>
 		
 		<para>Supported options for the <command>recycle</command> module are as follow:
@@ -262,7 +260,8 @@ This can be done using a configuration similar to the one shown in <link linkend
 			<varlistentry>
 			<term>recycle:noversions</term>
 				<listitem><para>
-				Specifies a list of paths (wildcards such as * and ? are supported) for which no versioning should be used. Only useful when <emphasis>recycle:versions</emphasis> is enabled.
+				Specifies a list of paths (wildcards such as * and ? are supported) for which no versioning
+				should be used. Only useful when <emphasis>recycle:versions</emphasis> is enabled.
 				</para></listitem>
 			</varlistentry>
 		</variablelist>
@@ -288,43 +287,40 @@ This can be done using a configuration similar to the one shown in <link linkend
 
     <sect2>
       <title>shadow_copy</title>
-	<warning>
+
+	<warning><para>
+	<emphasis>THIS IS NOT A BACKUP, ARCHIVAL, OR VERSION CONTROL SOLUTION!</emphasis>
+	</para>
+
+	<para>
+	With Samba or Windows servers, shadow copy is designed to be an end-user tool only.  It does not replace or
+	enhance your backup and archival solutions and should in no way be considered as such.  Additionally, if you
+	need version control, implement a version control system.  You have been warned.
+	</para></warning>
+
+
+	<para>
+	The shadow_copy module allows you to setup functionality that is similar to MS shadow copy services.  When
+	setup properly, this module allows Microsoft shadow copy clients to browse "shadow copies" on samba shares.
+	You will need to install the shadow copy client.  You can get the MS shadow copy client <ulink noescape="1"
+	url="http://www.microsoft.com/windowsserver2003/downloads/shadowcopyclient.mspx">here.</ulink>.  Note the
+	additional requirements for pre-Windows XP clients.  I did not test this functionality with any pre-Windows XP
+	clients.  You should be able to get more information about MS Shadow Copy <ulink noescape="1"
+	url="http://www.microsoft.com/windowsserver2003/techinfo/overview/scr.mspx">from the Microsoft's site</ulink>.
+	</para>
+
 	<para>
-	  <emphasis>THIS IS NOT A BACKUP, ARCHIVAL, OR VERSION CONTROL
-	  SOLUTION!</emphasis></para>
+	The shadow_copy VFS module requires some underlying file system setup with some sort of Logical Volume Manager
+	(LVM) such as LVM1, LVM2, or EVMS.  Setting up LVM is beyond the scope of this document; however, we will
+	outline the steps we took to test this functionality for <emphasis>example purposes only.</emphasis> You need
+	to make sure the LVM implementation you choose to deploy is ready for production.  Make sure you do plenty of
+	tests.
+	</para>
+
 	<para>
-	  With Samba or Windows servers, shadow copy is designed to be
-	  an end-user tool only.  It does not replace or enhance your
-	  backup and archival solutions and should in no way be
-	  considered as such.  Additionally, if you need version
-	  control, implement a version control system.  You have been
-	  warned.</para>
-	</warning>
-      <para>
-	The shadow_copy module allows you to setup functionality that
-	is similar to MS shadow copy services.  When setup properly,
-	this module allows Microsoft shadow copy clients to browse
-	"shadow copies" on samba shares.  You will need to install the
-	shadow copy client.  You can get the MS shadow copy client
-	<ulink noescape="1"
-	url="http://www.microsoft.com/windowsserver2003/downloads/shadowcopyclient.mspx">here.</ulink>.
-	Note the additional requirements for pre-Windows XP clients.
-	I did not test this functionality with any pre-Windows XP
-	clients.  You should be able to get more information about MS
-	Shadow Copy <ulink noescape="1"
-	url="http://www.microsoft.com/windowsserver2003/techinfo/overview/scr.mspx">from
-	the Microsoft's site</ulink>.</para>
-      <para>
-	The shadow_copy VFS module requires some underlying file system
-	setup with some sort of Logical Volume Manager (LVM) such as
-	LVM1, LVM2, or EVMS.  Setting up LVM is beyond the scope of
-	this document; however, we will outline the steps we took to
-	test this functionality for <emphasis>example purposes
-	only.</emphasis> You need to make sure the LVM implementation
-	you choose to deploy is ready for production.  Make sure you
-	do plenty of tests.</para>
-      <para>
 	Here are some common resources for LVM and EVMS:
+	</para>
+
 	<itemizedlist>
 	  <listitem>
 	    <para><ulink noescape="1"
@@ -349,164 +345,132 @@ This can be done using a configuration similar to the one shown in <link linkend
 	      source code and reiserfs.</para>
 	  </listitem>
 	</itemizedlist>
-      </para>
-      <sect3>
+
+	<sect3>
 	<title>Shadow Copy Setup</title>
 	<para>
-	  At the time of this writing, not much testing has been done.
-	  I tested the shadow copy VFS module with a specific scenario
-	  which was not deployed in a production environment, but more
-	  as a proof of concept.  The scenario involved a Samba 3 file
-	  server on Debian Sarge with an XFS file system and LVM1.  I
-	  do NOT recommend you use this as a solution without doing
-	  your own due diligence with regard to all the components
-	  presented here.  That said, following is an basic outline of
-	  how I got things going.</para>
+	At the time of this writing, not much testing has been done.  I tested the shadow copy VFS module with a
+	specific scenario which was not deployed in a production environment, but more as a proof of concept.  The
+	scenario involved a Samba 3 file server on Debian Sarge with an XFS file system and LVM1.  I do NOT recommend
+	you use this as a solution without doing your own due diligence with regard to all the components presented
+	here.  That said, following is an basic outline of how I got things going.
+	</para>
+
 	<orderedlist>
 	  <listitem>
-	    <formalpara>
-	      <title>Installed Operating System </title> 
-	      <para>
-		In my tests, I used <ulink
-		url="http://www.debian.org/devel/debian-installer/">Debian
-		Sarge</ulink> (i.e. testing) on an XFS file system.
-		Setting up the OS is a bit beyond the scope of this
-		document.  It is assumed that you have a working OS
-		capable of running Samba.</para>
-	    </formalpara>
+	    <formalpara><title>Installed Operating System </title> 
+	    <para>
+		In my tests, I used <ulink url="http://www.debian.org/devel/debian-installer/">Debian
+		Sarge</ulink> (i.e. testing) on an XFS file system.  Setting up the OS is a bit beyond the scope of this
+		document.  It is assumed that you have a working OS capable of running Samba.
+		</para></formalpara>
 	  </listitem>
+
 	  <listitem>
-	    <formalpara>
-	      <title>Install &amp; Configure Samba</title>
-	      <para>
-		See the <link linkend="introduction">installation
-		section</link> of this HOWTO for more detail on this.
-		It doesn't matter if it is a Domain Controller or
-		Member File Server, but it is assumed that you have a
-		working Samba 3.0.3 or newer server running.</para>
-	    </formalpara>
+	    <formalpara><title>Install &amp; Configure Samba</title>
+		<para>
+		See the <link linkend="introduction">installation section</link> of this HOWTO for more detail on this.
+		It doesn't matter if it is a Domain Controller or Member File Server, but it is assumed that you have a
+		working Samba 3.0.3 or newer server running.
+		</para></formalpara>
 	  </listitem>
+
 	  <listitem>
-	    <formalpara>
-	      <title>Install &amp; Configure LVM</title>
-	      <para>
-		Before you can make shadow copies available to the
-		client, you have to create the shadow copies.  This is
-		done by taking some sort of file system snapshot.
-		Snapshots are a typical feature of Logical Volume
-		Managers such as LVM, so we first need to have that
-		setup.</para>
-	    </formalpara>
-	    <itemizedlist>
-	      <para>
-		The following is provided as an example and will be
-		most helpful for Debian users.  Again, this was tested
-		using the "testing" or "Sarge" distribution.</para>
-	      <listitem>
+	    <formalpara><title>Install &amp; Configure LVM</title>
 		<para>
-		  Install lvm10 and devfsd packages if you have not
-		  done so already.  On Debian systems, you are warned
-		  of the interaction of devfs and lvm1 which requires
-		  the use of devfs filenames.  Running
-		  <command>apt-get update &amp;&amp; apt-get install
-		  lvm10 devfsd xfsprogs</command> should do the trick
-		  for this example.</para>
-	      </listitem>
-	      <listitem>
-		<para>
-		  Now you need to create a volume.  You will need to
-		  create a partition (or partitions) to add to your
-		  volume.  Use your favorite partitioning tool
-		  (e.g. Linux fdisk, cfdisk, etc.).  The partition
-		  type should be set to 0x8e for "Linux LVM."  In this
-		  example, we will use /dev/hdb1.</para>
-		<para>
-		  Once you have the Linux LVM partition (type 0x8e),
-		  you can run a series of commands to create the LVM
-		  volume.  You can use several disks and or
-		  partitions, but we will use only one in this
-		  example.  You may also need to load the kernel
-		  module with something like <command>modprobe lvm-mod
-		  </command> and set your system up to load it on
-		  reboot by adding it to
-		  (<filename>/etc/modules</filename>). </para>
-	      </listitem>
-	      <listitem>
-		<para>
-		  Create the physical volume with <command>pvcreate
-		  /dev/hdb1</command></para>
-	      </listitem>
-	      <listitem>
-		<para>
-		  Create the volume group with and add /dev/hda1 to it
-		  with <command>vgcreate shadowvol /dev/hdb1</command>
-		  </para>
-		<para>
-		  You can use <command>vgdisplay</command> to review
-		  information about the volume group.</para>
-	      </listitem>
-	      <listitem>
-		<para>
-		  Now you can create the logical volume with something
-		  like <command>lvcreate -L400M -nsh_test
-		  shadowvol</command></para>
-		<para>
-		  This creates the logical volume of 400MB's named
-		  "sh_test" in the volume group we created called
-		  shadowvol.  If everything is working so far, you
-		  should see them in
-		  <filename>/dev/shadowvol</filename>.</para>
-	      </listitem>
-	      <listitem>
-		<para>
-		  Now we should be ready to format the logical volume
-		  we named sh_test with <command>mkfs.xfs
-		  /dev/shadowvol/sh_test</command></para>
-		<para>
-		  You can format the logical volume with any file
-		  system you choose, but make sure to use one that
-		  allows you to take advantage of the additional
-		  features of LVM such as freezing, resizing and
-		  growing your file systems.</para>
-		<para>
-		  Now we have an LVM volume where we can play with the
-		  shadow_copy VFS module.</para>
-	      </listitem>
-	      <listitem>
-		<para>
-		  Now we need to prepare the directory with something
-		  like <command>mkdir -p /data/shadow_share</command>
-		  or whatever you want to name your shadow copy
-		  enabled Samba share.  Make sure you set the
-		  permissions such that you can use it.  If in doubt,
-		  use <command>chmod 777 /data/shadow_share</command>
-		  and tighten the permissions once you get things
-		  working.</para>
-	      </listitem>
-	      <listitem>
-		<para>
-		  Mount the LVM volume using something like
-		  <command>mount /dev/shadowvol/sh_test
-		  /data/shadow_share</command></para>
+		Before you can make shadow copies available to the client, you have to create the shadow copies.  This is
+		done by taking some sort of file system snapshot.  Snapshots are a typical feature of Logical Volume
+		Managers such as LVM, so we first need to have that setup.
+		</para></formalpara>
+
+	    <itemizedlist>
 		<para>
-		  You may also want to edit your
-		  <filename>/etc/fstab</filename> so that this
-		  partition mounts during the system boot.</para>
-	      </listitem>
-	    </itemizedlist>
-	  </listitem>
+		The following is provided as an example and will be most helpful for Debian users.  Again, this was tested
+		using the "testing" or "Sarge" distribution.
+		</para>
+
+			<listitem>
+			<para>
+			Install lvm10 and devfsd packages if you have not done so already.  On Debian systems, you are warned of the
+			interaction of devfs and lvm1 which requires the use of devfs filenames.  Running <command>apt-get update
+			&amp;&amp; apt-get install lvm10 devfsd xfsprogs</command> should do the trick for this example.
+			</para></listitem>
+
+			<listitem><para>
+			Now you need to create a volume.  You will need to create a partition (or partitions) to add to your volume.
+			Use your favorite partitioning tool (e.g. Linux fdisk, cfdisk, etc.).  The partition type should be set to
+			0x8e for "Linux LVM."  In this example, we will use /dev/hdb1.
+			</para>
+
+			<para>
+			Once you have the Linux LVM partition (type 0x8e), you can run a series of commands to create the LVM volume.
+			You can use several disks and or partitions, but we will use only one in this example.  You may also need to
+			load the kernel module with something like <command>modprobe lvm-mod </command> and set your system up to load
+			it on reboot by adding it to (<filename>/etc/modules</filename>).
+			</para></listitem>
+
+			<listitem><para>
+			Create the physical volume with <command>pvcreate /dev/hdb1</command>
+			</para></listitem>
+
+			<listitem><para>
+			Create the volume group with and add /dev/hda1 to it with <command>vgcreate shadowvol /dev/hdb1</command>
+			</para>
+
+			<para>
+			You can use <command>vgdisplay</command> to review information about the volume group.
+			</para></listitem>
+
+			<listitem><para>
+			Now you can create the logical volume with something like <command>lvcreate -L400M -nsh_test shadowvol</command>
+			</para>
+
+			<para>
+			This creates the logical volume of 400MB's named "sh_test" in the volume group we created called shadowvol.
+			If everything is working so far, you should see them in <filename>/dev/shadowvol</filename>.
+			</para></listitem>
+
+			<listitem><para>
+			Now we should be ready to format the logical volume we named sh_test with <command>mkfs.xfs
+			/dev/shadowvol/sh_test</command>
+			</para>
+
+			<para>
+			You can format the logical volume with any file system you choose, but make sure to use one that allows you to
+			take advantage of the additional features of LVM such as freezing, resizing and growing your file systems.
+			</para>
+
+			<para>
+			Now we have an LVM volume where we can play with the shadow_copy VFS module.
+			</para></listitem>
+
+			<listitem><para>
+			Now we need to prepare the directory with something like <command>mkdir -p /data/shadow_share</command> or
+			whatever you want to name your shadow copy enabled Samba share.  Make sure you set the permissions such that
+			you can use it.  If in doubt, use <command>chmod 777 /data/shadow_share</command> and tighten the permissions
+			once you get things working.
+			</para></listitem>
+
+			<listitem><para>
+			Mount the LVM volume using something like <command>mount /dev/shadowvol/sh_test /data/shadow_share</command>
+			</para>
+
+			<para>
+			You may also want to edit your <filename>/etc/fstab</filename> so that this partition mounts during the system boot.
+			</para></listitem>
+		</itemizedlist>
+
+		</listitem>
+
 	  <listitem>
-	    <formalpara>
-	      <title>Install &amp; Configure the shadow_copy VFS
-	      Module</title>
-	      <para>
-		Finally we get to the actual shadow_copy VFS module.
-		The shadow_copy VFS module should be available in
-		Samba 3.0.3 and higher.  The smb.conf configuration is pretty
-		standard.  Here is our example of a share configured
-		with the shadow_copy VFS module:</para>
-	    </formalpara>
-	      <example id="vfsshadow">
+	    <formalpara><title>Install &amp; Configure the shadow_copy VFS Module</title>
+		<para>
+		Finally we get to the actual shadow_copy VFS module.  The shadow_copy VFS module should be available in Samba
+		3.0.3 and higher.  The smb.conf configuration is pretty standard.  Here is our example of a share configured
+		with the shadow_copy VFS module:
+		</para></formalpara>
+
+		<example id="vfsshadow">
 		<title>Share With shadow_copy VFS</title>
 		<smbconfblock>
 		<smbconfsection name="[shadow_share]"/>
@@ -515,27 +479,24 @@ This can be done using a configuration similar to the one shown in <link linkend
 		<smbconfoption name="vfs objects">shadow_copy</smbconfoption>
 		<smbconfoption name="writeable">yes</smbconfoption>
 		<smbconfoption name="browseable">yes</smbconfoption>
-	      </smbconfblock>
-	    </example>
-	  </listitem>
-	  <listitem>
-	    <formalpara>
-	      <title>Create Snapshots and Make Them Available to shadow_copy.so</title> 
-	      <para>
-		Before you can browse the shadow copies, you must
-		create them and mount them.  This will most likely be
-		done with a script that runs as a cron job.  With this
-		particular solution, the shadow_copy VFS module is
-		used to browse LVM snapshots.  Those snapshots are not
-		created by the module.  They are not made available by
-		the module either.  This module allows the shadow copy
-		enabled client to browse the snapshots you take and
-		make available.</para>
-	    </formalpara>
+		</smbconfblock>
+		</example>
+
+		</listitem>
+
+		<listitem>
+	    <formalpara><title>Create Snapshots and Make Them Available to shadow_copy.so</title> 
+		<para>
+		Before you can browse the shadow copies, you must create them and mount them.  This will most likely be done
+		with a script that runs as a cron job.  With this particular solution, the shadow_copy VFS module is used to
+		browse LVM snapshots.  Those snapshots are not created by the module.  They are not made available by the
+		module either.  This module allows the shadow copy enabled client to browse the snapshots you take and make
+		available.
+		</para></formalpara>
+
 	    <para>
-	      Here is a simple script used to create and mount the
-	      snapshots:
-	      <screen>
+		Here is a simple script used to create and mount the snapshots:
+<screen>
 #!/bin/bash
 # This is a test, this is only a test
 SNAPNAME=`date +%Y.%m.%d-%H.%M.%S`
@@ -544,31 +505,25 @@ lvcreate -L10M -s -n $SNAPNAME /dev/shadowvol/sh_test
 xfs_freeze -u /data/shadow_share/
 mkdir /data/shadow_share/@GMT-$SNAPNAME
 mount /dev/shadowvol/$SNAPNAME /data/shadow_share/@GMT-$SNAPNAME -onouuid,ro
-	      </screen>
-	      Note that the script does not handle other things like
-	      remounting snapshots on reboot.
-	    </para>
-	  </listitem>
-	  <listitem>
-	    <formalpara>
-	      <title>Test From Client</title>
-	      <para>
-		To test, you will need to install the shadow copy
-		client which you can obtain from the <ulink
-		url="http://www.microsoft.com/windowsserver2003/downloads/shadowcopyclient.mspx">Microsoft
-		web site.</ulink> I only tested this with an XP client
-		so your results may vary with other pre-XP clients.
-		Once installed, with your XP client you can
-		right-click on specific files or in the empty space of
-		the shadow_share and view the "properties".  If
-		anything has changed, then you will see it on the
-		"Previous Versions" tab of the properties
-		window. </para>
-	    </formalpara>
+</screen>
+		Note that the script does not handle other things like remounting snapshots on reboot.
+	    </para></listitem>
+
+		<listitem>
+	    <formalpara><title>Test From Client</title>
+		<para>
+		To test, you will need to install the shadow copy client which you can obtain from the <ulink
+		url="http://www.microsoft.com/windowsserver2003/downloads/shadowcopyclient.mspx">Microsoft web site.</ulink> I
+		only tested this with an XP client so your results may vary with other pre-XP clients.  Once installed, with
+		your XP client you can right-click on specific files or in the empty space of the shadow_share and view the
+		"properties".  If anything has changed, then you will see it on the "Previous Versions" tab of the properties
+		window.
+		</para></formalpara>
 	  </listitem>
 	</orderedlist>
-      </sect3>
-    </sect2>
+
+	</sect3>
+</sect2>
 
 </sect1>
 
@@ -576,60 +531,54 @@ mount /dev/shadowvol/$SNAPNAME /data/shadow_share/@GMT-$SNAPNAME -onouuid,ro
 <title>VFS Modules Available Elsewhere</title>
 
 <para>
-This section contains a listing of various other VFS modules that 
-have been posted but do not currently reside in the Samba CVS 
-tree for one reason or another (e.g., it is easy for the maintainer 
-to have his or her own CVS tree).
+This section contains a listing of various other VFS modules that have been posted but do not currently reside
+in the Samba CVS tree for one reason or another (e.g., it is easy for the maintainer to have his or her own
+CVS tree).
 </para>
 
 <para>
-No statements about the stability or functionality of any module
-should be implied due to its presence here.
+No statements about the stability or functionality of any module should be implied due to its presence here.
 </para>
 
-	<sect2>
-	<title>DatabaseFS</title>
+<sect2>
+<title>DatabaseFS</title>
 
-		<para>
-		URL: <ulink noescape="1" url="http://www.css.tayloru.edu/~elorimer/databasefs/index.php">http://www.css.tayloru.edu/~elorimer/databasefs/index.php</ulink>
-		</para>
+<para>
+URL: <ulink noescape="1" url="http://www.css.tayloru.edu/~elorimer/databasefs/index.php">
+Taylors University DatabaeFS</ulink>
+</para>
 
-		<para>By <ulink url="mailto:elorimer@css.tayloru.edu">Eric Lorimer.</ulink></para>
+<para>By <ulink url="mailto:elorimer@css.tayloru.edu">Eric Lorimer.</ulink></para>
 
-		<para>
-		I have created a VFS module that implements a fairly complete read-only
-		filesystem. It presents information from a database as a filesystem in
-		a modular and generic way to allow different databases to be used
-		(originally designed for organizing MP3s under directories such as
-		<quote>Artists,</quote> <quote>Song Keywords,</quote> and so on. I have since easily
-		applied it to a student
-		roster database.) The directory structure is stored in the
-		database itself and the module makes no assumptions about the database
-		structure beyond the table it requires to run.
-		</para>
+<para>
+I have created a VFS module that implements a fairly complete read-only filesystem. It presents information
+from a database as a filesystem in a modular and generic way to allow different databases to be used
+(originally designed for organizing MP3s under directories such as <quote>Artists,</quote> <quote>Song
+Keywords,</quote> and so on. I have since easily applied it to a student roster database.) The directory
+structure is stored in the database itself and the module makes no assumptions about the database structure
+beyond the table it requires to run.
+</para>
 
-		<para>
-		Any feedback would be appreciated: comments, suggestions, patches,
-		and so on. If nothing else, hopefully it might prove useful for someone
-		else who wishes to create a virtual filesystem.
-		</para>
+<para>
+Any feedback would be appreciated: comments, suggestions, patches, and so on. If nothing else, hopefully it
+might prove useful for someone else who wishes to create a virtual filesystem.
+</para>
 
-	</sect2>
+</sect2>
 
-	<sect2>
-	<title>vscan</title>
+<sect2>
+<title>vscan</title>
 
-	<para>URL: <ulink noescape="1" url="http://www.openantivirus.org/projects.php#samba-vscan">http://www.openantivirus.org/projects.php#samba-vscan</ulink></para>
+<para>URL: <ulink noescape="1" url="http://www.openantivirus.org/projects.php#samba-vscan">
+Open Anti-Virus vscan</ulink>
+</para>
 
-		<para>
-		samba-vscan is a proof-of-concept module for Samba, which
-		provides on-access anti-virus support for files shared using 
-		Samba.
-		samba-vscan supports various virus scanners and is maintained 
-		by Rainer Link.
-		</para>
+<para>
+samba-vscan is a proof-of-concept module for Samba, which provides on-access anti-virus support for files
+shared using Samba.  samba-vscan supports various virus scanners and is maintained by Rainer Link.
+</para>
 
-	</sect2>
+</sect2>
 </sect1>
 
 </chapter>