make it stop...please, make it stop....

(This used to be commit 3d8f4113ebb178e2f8281edfce968d7035f443af)

1 files changed, 168 insertions, 0 deletions

diff --git a/docs/docbook/manpages/testparm.1.sgml b/docs/docbook/manpages/testparm.1.sgml
new file mode 100644
index 0000000000..da90dc6e6c
--- /dev/null
+++ b/docs/docbook/manpages/testparm.1.sgml
@@ -0,0 +1,168 @@
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+<refentry id="testparm">
+
+<refmeta>
+	<refentrytitle>testparm</refentrytitle>
+	<manvolnum>1</manvolnum>
+</refmeta>
+
+
+<refnamediv>
+	<refname>testparm</refname>
+	<refpurpose>check an smb.conf configuration file for 
+	internal correctness</refpurpose>
+</refnamediv>
+
+<refsynopsisdiv>
+	<cmdsynopsis>
+		<command>testparm</command>
+		<arg choice="opt">-s</arg>
+		<arg choice="opt">-h</arg>
+		<arg choice="opt">-L &lt;servername&gt;</arg>
+		<arg choice="req">config filename</arg>
+		<arg choice="opt">hostname  hostIP</arg>
+	</cmdsynopsis>
+</refsynopsisdiv>
+
+<refsect1>
+	<title>DESCRIPTION</title>
+
+	<para>This tool is part of the <ulink url="samba.7.html">
+	Samba</ulink> suite.</para>
+
+	<para><command>testparm</command> is a very simple test program 
+	to check an <command>smbd</command> configuration file for 
+	internal correctness. If this program reports no problems, you 
+	can use the configuration file with confidence that <command>smbd
+	</command> will successfully load the configuration file.</para>
+
+
+	<para>Note that this is <emphasis>NOT</emphasis> a guarantee that 
+	the services specified in the configuration file will be 
+	available or will operate as expected. </para>
+
+	<para>If the optional host name and host IP address are 
+	specified on the command line, this test program will run through 
+	the service entries reporting whether the specified host
+	has access to each service. </para>
+
+	<para>If <command>testparm</command> finds an error in the <filename>
+	smb.conf</filename> file it returns an exit code of 1 to the calling 
+	program, else it returns an exit code of 0. This allows shell scripts 
+	to test the output from <command>testparm</command>.</para>
+</refsect1>
+
+<refsect1>
+	<title>OPTIONS</title>
+
+	<variablelist>
+		<varlistentry>
+		<term>-s</term>
+		<listitem><para>Without this option, <command>testparm</command> 
+		will prompt for a carriage return after printing the service 
+		names and before dumping the service definitions.</para></listitem>
+		</varlistentry>
+		
+		
+		<varlistentry>
+		<term>-h</term>
+		<listitem><para>Print usage message </para></listitem>
+		</varlistentry>
+		
+		
+		<varlistentry>
+		<term>-L servername</term>
+		<listitem><para>Sets the value of the %L macro to servername.
+		This is useful for testing include files specified with the 
+		%L macro. </para></listitem>
+		</varlistentry>
+
+
+		<varlistentry>
+		<term>configfilename</term>
+		<listitem><para>This is the name of the configuration file 
+		to check. If this parameter is not present then the 
+		default <filename>smb.conf</filename> file will be checked. 	
+		</para></listitem>
+		</varlistentry>
+
+
+		<varlistentry>
+		<term>hostname</term>
+		<listitem><para>If this parameter and the following are 
+		specified, then testparm will examine the <parameter>hosts
+		allow</parameter> and <parameter>hosts deny</parameter> 
+		parameters in the <filename>smb.conf</filename> file to 
+		determine if the hostname with this IP address would be
+		allowed access to the <command>smbd</command> server.  If 
+		this parameter is supplied, the hostIP parameter must also
+		be supplied.</para></listitem>
+		</varlistentry>
+
+
+		<varlistentry>
+		<term>hostIP</term>
+		<listitem><para>This is the IP address of the host specified 
+		in the previous parameter.  This address must be supplied 
+		if the hostname parameter is supplied. </para></listitem>
+		</varlistentry>
+	</variablelist>
+</refsect1>
+
+<refsect1>
+	<title>FILES</title>
+
+	<variablelist>
+		<varlistentry>
+		<term><filename>smb.conf</filename></term>
+		<listitem><para>This is usually the name of the configuration 
+		file used by <command>smbd</command>. 
+		</para></listitem>
+		</varlistentry>
+	</variablelist>
+</refsect1>
+
+<refsect1>
+	<title>DIAGNOSTICS</title>
+
+	<para>The program will issue a message saying whether the 
+	configuration file loaded OK or not. This message may be preceeded by 
+	errors and warnings if the file did not load. If the file was 
+	loaded OK, the program then dumps all known service details 
+	to stdout. </para>
+</refsect1>
+
+
+<refsect1>
+	<title>VERSION</title>
+
+	<para>This man page is correct for version 2.2 of 
+	the Samba suite.</para>
+</refsect1>
+
+<refsect1>
+	<title>SEE ALSO</title>
+	<para><ulink url="smb.conf.5.html"><filename>smb.conf(5)</filename></ulink>, 
+	<ulink url="smbd.8.html"><command>smbd(8)</command></ulink>
+	</para>
+</refsect1>
+
+<refsect1>
+	<title>AUTHOR</title>
+	
+	<para>The original Samba software and related utilities 
+	were created by Andrew Tridgell. Samba is now developed
+	by the Samba Team as an Open Source project similar 
+	to the way the Linux kernel is developed.</para>
+	
+	<para>The original Samba man pages were written by Karl Auer. 
+	The man page sources were converted to YODL format (another 
+	excellent piece of Open Source software, available at
+	<ulink url="ftp://ftp.icce.rug.nl/pub/unix/">
+	ftp://ftp.icce.rug.nl/pub/unix/</ulink>) and updated for the Samba 2.0 
+	release by Jeremy Allison.  The conversion to DocBook for 
+	Samba 2.2 was done by Gerald Carter</para>
+</refsect1>
+
+</refentry>
+