diff options
author | John Terpstra <jht@samba.org> | 2003-05-11 07:45:07 +0000 |
---|---|---|
committer | John Terpstra <jht@samba.org> | 2003-05-11 07:45:07 +0000 |
commit | 9c5f1121bd79015adf4adf9579bceaa6ce45287b (patch) | |
tree | fa13aa5d151f30ee72760f09cacda96533511a06 /docs/docbook | |
parent | dce3fae2666fbe1040b8f2cd8f1efbbdf78362f9 (diff) | |
download | samba-9c5f1121bd79015adf4adf9579bceaa6ce45287b.tar.gz samba-9c5f1121bd79015adf4adf9579bceaa6ce45287b.tar.bz2 samba-9c5f1121bd79015adf4adf9579bceaa6ce45287b.zip |
Extending Samba Access Control Info
(This used to be commit d85ffb3e70189648cd2d0c8113dc3d8085ff80bc)
Diffstat (limited to 'docs/docbook')
-rw-r--r-- | docs/docbook/global.ent | 2 | ||||
-rw-r--r-- | docs/docbook/projdoc/AccessControls.xml | 547 | ||||
-rw-r--r-- | docs/docbook/projdoc/AdvancedNetworkAdmin.xml | 108 | ||||
-rw-r--r-- | docs/docbook/projdoc/NT_Security.xml | 335 | ||||
-rw-r--r-- | docs/docbook/projdoc/samba-doc.xml | 15 |
5 files changed, 556 insertions, 451 deletions
diff --git a/docs/docbook/global.ent b/docs/docbook/global.ent index 6a70b30940..6a494fcf2b 100644 --- a/docs/docbook/global.ent +++ b/docs/docbook/global.ent @@ -450,6 +450,7 @@ an Active Directory environment. <!ENTITY MAN-WINBINDD SYSTEM "manpages/winbindd.8.xml"> +<!ENTITY AccessControls SYSTEM "projdoc/AccessControls.xml"> <!ENTITY AdvancedNetworkAdmin SYSTEM "projdoc/AdvancedNetworkAdmin.xml"> <!ENTITY BUGS SYSTEM "projdoc/Bugs.xml"> <!ENTITY CUPS SYSTEM "projdoc/CUPS-printing.xml"> @@ -463,7 +464,6 @@ an Active Directory environment. <!ENTITY IntegratingWithWindows SYSTEM "projdoc/Integrating-with-Windows.xml"> <!ENTITY IntroSMB SYSTEM "projdoc/IntroSMB.xml"> <!ENTITY MS-Dfs-Setup SYSTEM "projdoc/msdfs_setup.xml"> -<!ENTITY NT-Security SYSTEM "projdoc/NT_Security.xml"> <!ENTITY NT4Migration SYSTEM "projdoc/NT4Migration.xml"> <!ENTITY NetworkBrowsing SYSTEM "projdoc/NetworkBrowsing.xml"> <!ENTITY Other-Clients SYSTEM "projdoc/Other-Clients.xml"> diff --git a/docs/docbook/projdoc/AccessControls.xml b/docs/docbook/projdoc/AccessControls.xml new file mode 100644 index 0000000000..c903af4468 --- /dev/null +++ b/docs/docbook/projdoc/AccessControls.xml @@ -0,0 +1,547 @@ +<chapter id="AccessControls"> +<chapterinfo> + &author.jht; + &author.jeremy; + <pubdate>May 10, 2003</pubdate> +</chapterinfo> +<title>File, Directory and Share Access Controls</title> + +<para> +Advanced MS Windows users are frequently perplexed when file, directory and share manipulation of +resources shared via Samba do not behave in the manner they might expect. MS Windows network +adminstrators are often confused regarding network access controls and what is the best way to +provide users with the type of access they need while protecting resources from the consequences +of untoward access capabilities. +</para> + +<para> +Unix administrators frequently are not familiar with the MS Windows environment and in particular +have difficulty in visualizing what the MS Windows user wishes to achieve in attempts to set file +and directory access permissions. +</para> + +<para> +The problem lies in the differences in how file and directory permissions and controls work +between the two environments. This difference is one that Samba can not completely hide, even +though it does try to make the chasm transparent. +</para> + +<para> +POSIX Access Control List technology has been available (along with Extended Attributes) +for Unix for many years, yet there is little evidence today of any significant use. This +explains to some extent the slow adoption of ACLs into commercial Linux products. MS Windows +administrators are astounded at this given that ACLs were a foundational capability of the now +decade old MS Windows NT operating system. +</para> + +<para> +The purpose of this chapter is to present each of the points of control that are possible with +Samba-3 in the hope that this will help the network administrator to find the optimum method +for delivering the best environment for MS Windows desktop users. +</para> + +<para> +This is an opportune point to mention that it should be borne in mind that Samba was created to +provide a means of interoperability and interchange of data between two operating environments +that are quite different. It was never the intent to make Unix/Linux like MS Windows NT. Instead +the purpose was an is to provide a sufficient level of exchange of data between the two environments. +What is available today extends well beyond early plans and expections, yet the gap continues to +shrink. +</para> + +<sect1> +<title>Features and Benefits</title> + + <para> + Samba offers a lot of flexibility in file system access management. These are the key access control + facilities present in Samba today: + </para> + + <itemizedlist> + <title>Samba Access Control Facilities</title> + <listitem><para> + Unix file and directory permissions + </para></listitem> + + <listitem><para> + Samba Share Definitions + </para></listitem> + + <listitem><para> + Samba Share ACLs + </para></listitem> + + <listitem><para> + MS Windows ACLs through Unix POSIX ACLs + </para></listitem> + </itemizedlist> + +</sect1> + +<sect1> +<title>File System Access Controls</title> + +<para> +Explain here how Unix file and permissions work +</para> + +</sect1> + +<sect1> +<title>Share Definition Access Controls</title> + +<para> +Explain here about the smb.conf [share] parameters +</para> + +</sect1> + +<sect1> +<title>Access Controls on Shares</title> + + <para> + This section deals with how to configure Samba per share access control restrictions. + By default samba sets no restrictions on the share itself. Restrictions on the share itself + can be set on MS Windows NT4/200x/XP shares. This can be a very effective way to limit who can + connect to a share. In the absence of specific restrictions the default setting is to allow + the global user <emphasis>Everyone</emphasis> Full Control (ie: Full control, Change and Read). + </para> + + <para> + At this time Samba does NOT provide a tool for configuring access control setting on the Share + itself. Samba does have the capacity to store and act on access control settings, but the only + way to create those settings is to use either the NT4 Server Manager or the Windows 200x MMC for + Computer Management. + </para> + + <para> + Samba stores the per share access control settings in a file called <filename>share_info.tdb</filename>. + The location of this file on your system will depend on how samba was compiled. The default location + for samba's tdb files is under <filename>/usr/local/samba/var</filename>. If the <filename>tdbdump</filename> + utility has been compiled and installed on your system then you can examine the contents of this file + by: <userinput>tdbdump share_info.tdb</userinput>. + </para> + + <sect2> + <title>Share Permissions Management</title> + + <para> + The best tool for the task is platform dependant. Choose the best tool for your environmemt. + </para> + + <sect3> + <title>Windows NT4 Workstation/Server</title> + <para> + The tool you need to use to manage share permissions on a Samba server is the NT Server Manager. + Server Manager is shipped with Windows NT4 Server products but not with Windows NT4 Workstation. + You can obtain the NT Server Manager for MS Windows NT4 Workstation from Microsoft - see details below. + </para> + + <procedure> + <title>Instructions</title> + <step><para> + Launch the NT4 Server Manager, click on the Samba server you want to administer, then from the menu + select Computer, then click on the Shared Directories entry. + </para></step> + + <step><para> + Now click on the share that you wish to manage, then click on the Properties tab, next click on + the Permissions tab. Now you can Add or change access control settings as you wish. + </para></step> + </procedure> + + </sect3> + + <sect3> + <title>Windows 200x/XP</title> + + <para> + On MS Windows NT4/200x/XP system access control lists on the share itself are set using native + tools, usually from filemanager. For example, in Windows 200x: right click on the shared folder, + then select 'Sharing', then click on 'Permissions'. The default Windows NT4/200x permission allows + <emphasis>Everyone</emphasis> Full Control on the Share. + </para> + + <para> + MS Windows 200x and later all comes with a tool called the 'Computer Management' snap-in for the + Microsoft Management Console (MMC). This tool is located by clicking on <filename>Control Panel -> + Administrative Tools -> Computer Management</filename>. + </para> + + <procedure> + <title>Instructions</title> + <step><para> + After launching the MMC with the Computer Management snap-in, click on the menu item 'Action', + select 'Connect to another computer'. If you are not logged onto a domain you will be prompted + to enter a domain login user identifier and a password. This will authenticate you to the domain. + If you where already logged in with administrative privilidge this step is not offered. + </para></step> + + <step><para> + If the Samba server is not shown in the Select Computer box, then type in the name of the target + Samba server in the field 'Name:'. Now click on the [+] next to 'System Tools', then on the [+] + next to 'Shared Folders' in the left panel. + </para></step> + + <step><para> + Now in the right panel, double-click on the share you wish to set access control permissions on. + Then click on the tab 'Share Permissions'. It is now possible to add access control entities + to the shared folder. Do NOT forget to set what type of access (full control, change, read) you + wish to assign for each entry. + </para></step> + </procedure> + + <warning> + <para> + Be careful. If you take away all permissions from the Everyone user without removing this user + then effectively no user will be able to access the share. This is a result of what is known as + ACL precidence. ie: Everyone with NO ACCESS means that MaryK who is part of the group Everyone + will have no access even if this user is given explicit full control access. + </para> + </warning> + + </sect3> + </sect2> + +</sect1> + +<sect1> +<title>MS Windows Access Control Lists and Unix Interoperability</title> + + <sect2> + <title>Viewing and changing UNIX permissions using the NT + security dialogs</title> + + <para>Windows NT clients can use their native security settings + dialog box to view and modify the underlying UNIX permissions.</para> + + <para>Note that this ability is careful not to compromise + the security of the UNIX host Samba is running on, and + still obeys all the file permission rules that a Samba + administrator can set.</para> + + <note> + <para> + All access to Unix/Linux system file via Samba is controlled at + the operating system file access control level. When trying to + figure out file access problems it is vitally important to identify + the identity of the Windows user as it is presented by Samba at + the point of file access. This can best be determined from the + Samba log files. + </para> + </note> + </sect2> + + <sect2> + <title>How to view file security on a Samba share</title> + + <para>From an NT4/2000/XP client, single-click with the right + mouse button on any file or directory in a Samba mounted + drive letter or UNC path. When the menu pops-up, click + on the <emphasis>Properties</emphasis> entry at the bottom of + the menu. This brings up the file properties dialog + box. Click on the tab <emphasis>Security</emphasis> and you + will see three buttons, <emphasis>Permissions</emphasis>, + <emphasis>Auditing</emphasis>, and <emphasis>Ownership</emphasis>. + The <emphasis>Auditing</emphasis> button will cause either + an error message <errorname>A requested privilege is not held + by the client</errorname> to appear if the user is not the + NT Administrator, or a dialog which is intended to allow an + Administrator to add auditing requirements to a file if the + user is logged on as the NT Administrator. This dialog is + non-functional with a Samba share at this time, as the only + useful button, the <command>Add</command> button will not currently + allow a list of users to be seen.</para> + + </sect2> + + <sect2> + <title>Viewing file ownership</title> + + <para>Clicking on the <command>"Ownership"</command> button + brings up a dialog box telling you who owns the given file. The + owner name will be of the form :</para> + + <para><command>"SERVER\user (Long name)"</command></para> + + <para>Where <replaceable>SERVER</replaceable> is the NetBIOS name of + the Samba server, <replaceable>user</replaceable> is the user name of + the UNIX user who owns the file, and <replaceable>(Long name)</replaceable> + is the descriptive string identifying the user (normally found in the + GECOS field of the UNIX password database). Click on the <command>Close + </command> button to remove this dialog.</para> + + <para>If the parameter <parameter>nt acl support</parameter> + is set to <constant>false</constant> then the file owner will + be shown as the NT user <command>"Everyone"</command>.</para> + + <para>The <command>Take Ownership</command> button will not allow + you to change the ownership of this file to yourself (clicking on + it will display a dialog box complaining that the user you are + currently logged onto the NT client cannot be found). The reason + for this is that changing the ownership of a file is a privileged + operation in UNIX, available only to the <emphasis>root</emphasis> + user. As clicking on this button causes NT to attempt to change + the ownership of a file to the current user logged into the NT + client this will not work with Samba at this time.</para> + + <para>There is an NT chown command that will work with Samba + and allow a user with Administrator privilege connected + to a Samba server as root to change the ownership of + files on both a local NTFS filesystem or remote mounted NTFS + or Samba drive. This is available as part of the <emphasis>Seclib + </emphasis> NT security library written by Jeremy Allison of + the Samba Team, available from the main Samba ftp site.</para> + + </sect2> + + <sect2> + <title>Viewing file or directory permissions</title> + + <para>The third button is the <command>"Permissions"</command> + button. Clicking on this brings up a dialog box that shows both + the permissions and the UNIX owner of the file or directory. + The owner is displayed in the form :</para> + + <para><command>"SERVER\user (Long name)"</command></para> + + <para>Where <replaceable>SERVER</replaceable> is the NetBIOS name of + the Samba server, <replaceable>user</replaceable> is the user name of + the UNIX user who owns the file, and <replaceable>(Long name)</replaceable> + is the descriptive string identifying the user (normally found in the + GECOS field of the UNIX password database).</para> + + <para>If the parameter <parameter>nt acl support</parameter> + is set to <constant>false</constant> then the file owner will + be shown as the NT user <command>"Everyone"</command> and the + permissions will be shown as NT "Full Control".</para> + + + <para>The permissions field is displayed differently for files + and directories, so I'll describe the way file permissions + are displayed first.</para> + + <sect3> + <title>File Permissions</title> + + <para>The standard UNIX user/group/world triple and + the corresponding "read", "write", "execute" permissions + triples are mapped by Samba into a three element NT ACL + with the 'r', 'w', and 'x' bits mapped into the corresponding + NT permissions. The UNIX world permissions are mapped into + the global NT group <command>Everyone</command>, followed + by the list of permissions allowed for UNIX world. The UNIX + owner and group permissions are displayed as an NT + <command>user</command> icon and an NT <command>local + group</command> icon respectively followed by the list + of permissions allowed for the UNIX user and group.</para> + + <para>As many UNIX permission sets don't map into common + NT names such as <command>"read"</command>, <command> + "change"</command> or <command>"full control"</command> then + usually the permissions will be prefixed by the words <command> + "Special Access"</command> in the NT display list.</para> + + <para>But what happens if the file has no permissions allowed + for a particular UNIX user group or world component ? In order + to allow "no permissions" to be seen and modified then Samba + overloads the NT <command>"Take Ownership"</command> ACL attribute + (which has no meaning in UNIX) and reports a component with + no permissions as having the NT <command>"O"</command> bit set. + This was chosen of course to make it look like a zero, meaning + zero permissions. More details on the decision behind this will + be given below.</para> + </sect3> + + <sect3> + <title>Directory Permissions</title> + + <para>Directories on an NT NTFS file system have two + different sets of permissions. The first set of permissions + is the ACL set on the directory itself, this is usually displayed + in the first set of parentheses in the normal <command>"RW"</command> + NT style. This first set of permissions is created by Samba in + exactly the same way as normal file permissions are, described + above, and is displayed in the same way.</para> + + <para>The second set of directory permissions has no real meaning + in the UNIX permissions world and represents the <command> + "inherited"</command> permissions that any file created within + this directory would inherit.</para> + + <para>Samba synthesises these inherited permissions for NT by + returning as an NT ACL the UNIX permission mode that a new file + created by Samba on this share would receive.</para> + </sect3> + </sect2> + + <sect2> + <title>Modifying file or directory permissions</title> + + <para>Modifying file and directory permissions is as simple + as changing the displayed permissions in the dialog box, and + clicking the <command>OK</command> button. However, there are + limitations that a user needs to be aware of, and also interactions + with the standard Samba permission masks and mapping of DOS + attributes that need to also be taken into account.</para> + + <para>If the parameter <parameter>nt acl support</parameter> + is set to <constant>false</constant> then any attempt to set + security permissions will fail with an <command>"Access Denied" + </command> message.</para> + + <para>The first thing to note is that the <command>"Add"</command> + button will not return a list of users in Samba (it will give + an error message of <command>"The remote procedure call failed + and did not execute"</command>). This means that you can only + manipulate the current user/group/world permissions listed in + the dialog box. This actually works quite well as these are the + only permissions that UNIX actually has.</para> + + <para>If a permission triple (either user, group, or world) + is removed from the list of permissions in the NT dialog box, + then when the <command>"OK"</command> button is pressed it will + be applied as "no permissions" on the UNIX side. If you then + view the permissions again the "no permissions" entry will appear + as the NT <command>"O"</command> flag, as described above. This + allows you to add permissions back to a file or directory once + you have removed them from a triple component.</para> + + <para>As UNIX supports only the "r", "w" and "x" bits of + an NT ACL then if other NT security attributes such as "Delete + access" are selected then they will be ignored when applied on + the Samba server.</para> + + <para>When setting permissions on a directory the second + set of permissions (in the second set of parentheses) is + by default applied to all files within that directory. If this + is not what you want you must uncheck the <command>"Replace + permissions on existing files"</command> checkbox in the NT + dialog before clicking <command>"OK"</command>.</para> + + <para>If you wish to remove all permissions from a + user/group/world component then you may either highlight the + component and click the <command>"Remove"</command> button, + or set the component to only have the special <command>"Take + Ownership"</command> permission (displayed as <command>"O" + </command>) highlighted.</para> + </sect2> + + <sect2> + <title>Interaction with the standard Samba create mask + parameters</title> + + <para>There are four parameters + to control interaction with the standard Samba create mask parameters. + These are :</para> + + <para><parameter>security mask</parameter></para> + <para><parameter>force security mode</parameter></para> + <para><parameter>directory security mask</parameter></para> + <para><parameter>force directory security mode</parameter></para> + + <para>Once a user clicks <command>"OK"</command> to apply the + permissions Samba maps the given permissions into a user/group/world + r/w/x triple set, and then will check the changed permissions for a + file against the bits set in the <ulink url="smb.conf.5.html#SECURITYMASK"> + <parameter>security mask</parameter></ulink> parameter. Any bits that + were changed that are not set to '1' in this parameter are left alone + in the file permissions.</para> + + <para>Essentially, zero bits in the <parameter>security mask</parameter> + mask may be treated as a set of bits the user is <emphasis>not</emphasis> + allowed to change, and one bits are those the user is allowed to change. + </para> + + <para>If not set explicitly this parameter is set to the same value as + the <ulink url="smb.conf.5.html#CREATEMASK"><parameter>create mask + </parameter></ulink> parameter. To allow a user to modify all the + user/group/world permissions on a file, set this parameter + to 0777.</para> + + <para>Next Samba checks the changed permissions for a file against + the bits set in the <ulink url="smb.conf.5.html#FORCESECURITYMODE"> + <parameter>force security mode</parameter></ulink> parameter. Any bits + that were changed that correspond to bits set to '1' in this parameter + are forced to be set.</para> + + <para>Essentially, bits set in the <parameter>force security mode + </parameter> parameter may be treated as a set of bits that, when + modifying security on a file, the user has always set to be 'on'.</para> + + <para>If not set explicitly this parameter is set to the same value + as the <ulink url="smb.conf.5.html#FORCECREATEMODE"><parameter>force + create mode</parameter></ulink> parameter. + To allow a user to modify all the user/group/world permissions on a file + with no restrictions set this parameter to 000.</para> + + <para>The <parameter>security mask</parameter> and <parameter>force + security mode</parameter> parameters are applied to the change + request in that order.</para> + + <para>For a directory Samba will perform the same operations as + described above for a file except using the parameter <parameter> + directory security mask</parameter> instead of <parameter>security + mask</parameter>, and <parameter>force directory security mode + </parameter> parameter instead of <parameter>force security mode + </parameter>.</para> + + <para>The <parameter>directory security mask</parameter> parameter + by default is set to the same value as the <parameter>directory mask + </parameter> parameter and the <parameter>force directory security + mode</parameter> parameter by default is set to the same value as + the <parameter>force directory mode</parameter> parameter. </para> + + <para>In this way Samba enforces the permission restrictions that + an administrator can set on a Samba share, whilst still allowing users + to modify the permission bits within that restriction.</para> + + <para>If you want to set up a share that allows users full control + in modifying the permission bits on their files and directories and + doesn't force any particular bits to be set 'on', then set the following + parameters in the &smb.conf; file in that share specific section :</para> + + <para><parameter>security mask = 0777</parameter></para> + <para><parameter>force security mode = 0</parameter></para> + <para><parameter>directory security mask = 0777</parameter></para> + <para><parameter>force directory security mode = 0</parameter></para> + </sect2> + + <sect2> + <title>Interaction with the standard Samba file attribute + mapping</title> + + <para>Samba maps some of the DOS attribute bits (such as "read + only") into the UNIX permissions of a file. This means there can + be a conflict between the permission bits set via the security + dialog and the permission bits set by the file attribute mapping. + </para> + + <para>One way this can show up is if a file has no UNIX read access + for the owner it will show up as "read only" in the standard + file attributes tabbed dialog. Unfortunately this dialog is + the same one that contains the security info in another tab.</para> + + <para>What this can mean is that if the owner changes the permissions + to allow themselves read access using the security dialog, clicks + <command>"OK"</command> to get back to the standard attributes tab + dialog, and then clicks <command>"OK"</command> on that dialog, then + NT will set the file permissions back to read-only (as that is what + the attributes still say in the dialog). This means that after setting + permissions and clicking <command>"OK"</command> to get back to the + attributes dialog you should always hit <command>"Cancel"</command> + rather than <command>"OK"</command> to ensure that your changes + are not overridden.</para> + </sect2> +</sect1> + +<sect1> +<title>Common Errors</title> + +<para> +Stuff here +</para> + +</sect1> + +</chapter> diff --git a/docs/docbook/projdoc/AdvancedNetworkAdmin.xml b/docs/docbook/projdoc/AdvancedNetworkAdmin.xml index dc2a78f5a6..e6e7347290 100644 --- a/docs/docbook/projdoc/AdvancedNetworkAdmin.xml +++ b/docs/docbook/projdoc/AdvancedNetworkAdmin.xml @@ -13,114 +13,6 @@ environment, and to make their lives a little easier. </para> <sect1> -<title>Configuring Samba Share Access Controls</title> - -<para> -This section deals with how to configure Samba per share access control restrictions. -By default samba sets no restrictions on the share itself. Restrictions on the share itself -can be set on MS Windows NT4/200x/XP shares. This can be a very effective way to limit who can -connect to a share. In the absence of specific restrictions the default setting is to allow -the global user <emphasis>Everyone</emphasis> Full Control (ie: Full control, Change and Read). -</para> - -<para> -At this time Samba does NOT provide a tool for configuring access control setting on the Share -itself. Samba does have the capacity to store and act on access control settings, but the only -way to create those settings is to use either the NT4 Server Manager or the Windows 200x MMC for -Computer Management. -</para> - -<para> -Samba stores the per share access control settings in a file called <filename>share_info.tdb</filename>. -The location of this file on your system will depend on how samba was compiled. The default location -for samba's tdb files is under <filename>/usr/local/samba/var</filename>. If the <filename>tdbdump</filename> -utility has been compiled and installed on your system then you can examine the contents of this file -by: <userinput>tdbdump share_info.tdb</userinput>. -</para> - -<sect2> -<title>Share Permissions Management</title> - -<para> -The best tool for the task is platform dependant. Choose the best tool for your environmemt. -</para> - -<sect3> -<title>Windows NT4 Workstation/Server</title> -<para> -The tool you need to use to manage share permissions on a Samba server is the NT Server Manager. -Server Manager is shipped with Windows NT4 Server products but not with Windows NT4 Workstation. -You can obtain the NT Server Manager for MS Windows NT4 Workstation from Microsoft - see details below. -</para> - -<procedure> -<title>Instructions</title> -<step><para> -Launch the NT4 Server Manager, click on the Samba server you want to administer, then from the menu -select Computer, then click on the Shared Directories entry. -</para></step> - -<step><para> - Now click on the share that you wish to manage, then click on the Properties tab, next click on - the Permissions tab. Now you can Add or change access control settings as you wish. -</para></step> -</procedure> - -</sect3> - -<sect3> -<title>Windows 200x/XP</title> - -<para> -On MS Windows NT4/200x/XP system access control lists on the share itself are set using native -tools, usually from filemanager. For example, in Windows 200x: right click on the shared folder, -then select 'Sharing', then click on 'Permissions'. The default Windows NT4/200x permission allows -<emphasis>Everyone</emphasis> Full Control on the Share. -</para> - -<para> -MS Windows 200x and later all comes with a tool called the 'Computer Management' snap-in for the -Microsoft Management Console (MMC). This tool is located by clicking on <filename>Control Panel -> -Administrative Tools -> Computer Management</filename>. -</para> - -<procedure> -<title>Instructions</title> -<step><para> - After launching the MMC with the Computer Management snap-in, click on the menu item 'Action', - select 'Connect to another computer'. If you are not logged onto a domain you will be prompted - to enter a domain login user identifier and a password. This will authenticate you to the domain. - If you where already logged in with administrative privilidge this step is not offered. -</para></step> - -<step><para> -If the Samba server is not shown in the Select Computer box, then type in the name of the target -Samba server in the field 'Name:'. Now click on the [+] next to 'System Tools', then on the [+] -next to 'Shared Folders' in the left panel. -</para></step> - -<step><para> -Now in the right panel, double-click on the share you wish to set access control permissions on. -Then click on the tab 'Share Permissions'. It is now possible to add access control entities -to the shared folder. Do NOT forget to set what type of access (full control, change, read) you -wish to assign for each entry. -</para></step> -</procedure> - -<warning> -<para> -Be careful. If you take away all permissions from the Everyone user without removing this user -then effectively no user will be able to access the share. This is a result of what is known as -ACL precidence. ie: Everyone with NO ACCESS means that MaryK who is part of the group Everyone -will have no access even if this user is given explicit full control access. -</para> -</warning> - -</sect3> -</sect2> -</sect1> - -<sect1> <title>Remote Server Administration</title> <para> diff --git a/docs/docbook/projdoc/NT_Security.xml b/docs/docbook/projdoc/NT_Security.xml deleted file mode 100644 index 9bff25337c..0000000000 --- a/docs/docbook/projdoc/NT_Security.xml +++ /dev/null @@ -1,335 +0,0 @@ -<chapter id="unix-permissions"> -<chapterinfo> - &author.jeremy; - <pubdate>12 Apr 1999</pubdate> -</chapterinfo> - -<title>UNIX Permission Bits and Windows NT Access Control Lists</title> - -<sect1> - <title>Viewing and changing UNIX permissions using the NT - security dialogs</title> - - <para>Windows NT clients can use their native security settings - dialog box to view and modify the underlying UNIX permissions.</para> - - <para>Note that this ability is careful not to compromise - the security of the UNIX host Samba is running on, and - still obeys all the file permission rules that a Samba - administrator can set.</para> - - <note> - <para> - All access to Unix/Linux system file via Samba is controlled at - the operating system file access control level. When trying to - figure out file access problems it is vitally important to identify - the identity of the Windows user as it is presented by Samba at - the point of file access. This can best be determined from the - Samba log files. - </para> - </note> -</sect1> - -<sect1> - <title>How to view file security on a Samba share</title> - - <para>From an NT4/2000/XP client, single-click with the right - mouse button on any file or directory in a Samba mounted - drive letter or UNC path. When the menu pops-up, click - on the <emphasis>Properties</emphasis> entry at the bottom of - the menu. This brings up the file properties dialog - box. Click on the tab <emphasis>Security</emphasis> and you - will see three buttons, <emphasis>Permissions</emphasis>, - <emphasis>Auditing</emphasis>, and <emphasis>Ownership</emphasis>. - The <emphasis>Auditing</emphasis> button will cause either - an error message <errorname>A requested privilege is not held - by the client</errorname> to appear if the user is not the - NT Administrator, or a dialog which is intended to allow an - Administrator to add auditing requirements to a file if the - user is logged on as the NT Administrator. This dialog is - non-functional with a Samba share at this time, as the only - useful button, the <command>Add</command> button will not currently - allow a list of users to be seen.</para> - -</sect1> - -<sect1> - <title>Viewing file ownership</title> - - <para>Clicking on the <command>"Ownership"</command> button - brings up a dialog box telling you who owns the given file. The - owner name will be of the form :</para> - - <para><command>"SERVER\user (Long name)"</command></para> - - <para>Where <replaceable>SERVER</replaceable> is the NetBIOS name of - the Samba server, <replaceable>user</replaceable> is the user name of - the UNIX user who owns the file, and <replaceable>(Long name)</replaceable> - is the descriptive string identifying the user (normally found in the - GECOS field of the UNIX password database). Click on the <command>Close - </command> button to remove this dialog.</para> - - <para>If the parameter <parameter>nt acl support</parameter> - is set to <constant>false</constant> then the file owner will - be shown as the NT user <command>"Everyone"</command>.</para> - - <para>The <command>Take Ownership</command> button will not allow - you to change the ownership of this file to yourself (clicking on - it will display a dialog box complaining that the user you are - currently logged onto the NT client cannot be found). The reason - for this is that changing the ownership of a file is a privileged - operation in UNIX, available only to the <emphasis>root</emphasis> - user. As clicking on this button causes NT to attempt to change - the ownership of a file to the current user logged into the NT - client this will not work with Samba at this time.</para> - - <para>There is an NT chown command that will work with Samba - and allow a user with Administrator privilege connected - to a Samba server as root to change the ownership of - files on both a local NTFS filesystem or remote mounted NTFS - or Samba drive. This is available as part of the <emphasis>Seclib - </emphasis> NT security library written by Jeremy Allison of - the Samba Team, available from the main Samba ftp site.</para> - -</sect1> - -<sect1> - <title>Viewing file or directory permissions</title> - - <para>The third button is the <command>"Permissions"</command> - button. Clicking on this brings up a dialog box that shows both - the permissions and the UNIX owner of the file or directory. - The owner is displayed in the form :</para> - - <para><command>"SERVER\user (Long name)"</command></para> - - <para>Where <replaceable>SERVER</replaceable> is the NetBIOS name of - the Samba server, <replaceable>user</replaceable> is the user name of - the UNIX user who owns the file, and <replaceable>(Long name)</replaceable> - is the descriptive string identifying the user (normally found in the - GECOS field of the UNIX password database).</para> - - <para>If the parameter <parameter>nt acl support</parameter> - is set to <constant>false</constant> then the file owner will - be shown as the NT user <command>"Everyone"</command> and the - permissions will be shown as NT "Full Control".</para> - - - <para>The permissions field is displayed differently for files - and directories, so I'll describe the way file permissions - are displayed first.</para> - - <sect2> - <title>File Permissions</title> - - <para>The standard UNIX user/group/world triple and - the corresponding "read", "write", "execute" permissions - triples are mapped by Samba into a three element NT ACL - with the 'r', 'w', and 'x' bits mapped into the corresponding - NT permissions. The UNIX world permissions are mapped into - the global NT group <command>Everyone</command>, followed - by the list of permissions allowed for UNIX world. The UNIX - owner and group permissions are displayed as an NT - <command>user</command> icon and an NT <command>local - group</command> icon respectively followed by the list - of permissions allowed for the UNIX user and group.</para> - - <para>As many UNIX permission sets don't map into common - NT names such as <command>"read"</command>, <command> - "change"</command> or <command>"full control"</command> then - usually the permissions will be prefixed by the words <command> - "Special Access"</command> in the NT display list.</para> - - <para>But what happens if the file has no permissions allowed - for a particular UNIX user group or world component ? In order - to allow "no permissions" to be seen and modified then Samba - overloads the NT <command>"Take Ownership"</command> ACL attribute - (which has no meaning in UNIX) and reports a component with - no permissions as having the NT <command>"O"</command> bit set. - This was chosen of course to make it look like a zero, meaning - zero permissions. More details on the decision behind this will - be given below.</para> - </sect2> - - <sect2> - <title>Directory Permissions</title> - - <para>Directories on an NT NTFS file system have two - different sets of permissions. The first set of permissions - is the ACL set on the directory itself, this is usually displayed - in the first set of parentheses in the normal <command>"RW"</command> - NT style. This first set of permissions is created by Samba in - exactly the same way as normal file permissions are, described - above, and is displayed in the same way.</para> - - <para>The second set of directory permissions has no real meaning - in the UNIX permissions world and represents the <command> - "inherited"</command> permissions that any file created within - this directory would inherit.</para> - - <para>Samba synthesises these inherited permissions for NT by - returning as an NT ACL the UNIX permission mode that a new file - created by Samba on this share would receive.</para> - </sect2> -</sect1> - -<sect1> - <title>Modifying file or directory permissions</title> - - <para>Modifying file and directory permissions is as simple - as changing the displayed permissions in the dialog box, and - clicking the <command>OK</command> button. However, there are - limitations that a user needs to be aware of, and also interactions - with the standard Samba permission masks and mapping of DOS - attributes that need to also be taken into account.</para> - - <para>If the parameter <parameter>nt acl support</parameter> - is set to <constant>false</constant> then any attempt to set - security permissions will fail with an <command>"Access Denied" - </command> message.</para> - - <para>The first thing to note is that the <command>"Add"</command> - button will not return a list of users in Samba (it will give - an error message of <command>"The remote procedure call failed - and did not execute"</command>). This means that you can only - manipulate the current user/group/world permissions listed in - the dialog box. This actually works quite well as these are the - only permissions that UNIX actually has.</para> - - <para>If a permission triple (either user, group, or world) - is removed from the list of permissions in the NT dialog box, - then when the <command>"OK"</command> button is pressed it will - be applied as "no permissions" on the UNIX side. If you then - view the permissions again the "no permissions" entry will appear - as the NT <command>"O"</command> flag, as described above. This - allows you to add permissions back to a file or directory once - you have removed them from a triple component.</para> - - <para>As UNIX supports only the "r", "w" and "x" bits of - an NT ACL then if other NT security attributes such as "Delete - access" are selected then they will be ignored when applied on - the Samba server.</para> - - <para>When setting permissions on a directory the second - set of permissions (in the second set of parentheses) is - by default applied to all files within that directory. If this - is not what you want you must uncheck the <command>"Replace - permissions on existing files"</command> checkbox in the NT - dialog before clicking <command>"OK"</command>.</para> - - <para>If you wish to remove all permissions from a - user/group/world component then you may either highlight the - component and click the <command>"Remove"</command> button, - or set the component to only have the special <command>"Take - Ownership"</command> permission (displayed as <command>"O" - </command>) highlighted.</para> -</sect1> - -<sect1> - <title>Interaction with the standard Samba create mask - parameters</title> - - <para>There are four parameters - to control interaction with the standard Samba create mask parameters. - These are :</para> - - <para><parameter>security mask</parameter></para> - <para><parameter>force security mode</parameter></para> - <para><parameter>directory security mask</parameter></para> - <para><parameter>force directory security mode</parameter></para> - - <para>Once a user clicks <command>"OK"</command> to apply the - permissions Samba maps the given permissions into a user/group/world - r/w/x triple set, and then will check the changed permissions for a - file against the bits set in the <ulink url="smb.conf.5.html#SECURITYMASK"> - <parameter>security mask</parameter></ulink> parameter. Any bits that - were changed that are not set to '1' in this parameter are left alone - in the file permissions.</para> - - <para>Essentially, zero bits in the <parameter>security mask</parameter> - mask may be treated as a set of bits the user is <emphasis>not</emphasis> - allowed to change, and one bits are those the user is allowed to change. - </para> - - <para>If not set explicitly this parameter is set to the same value as - the <ulink url="smb.conf.5.html#CREATEMASK"><parameter>create mask - </parameter></ulink> parameter. To allow a user to modify all the - user/group/world permissions on a file, set this parameter - to 0777.</para> - - <para>Next Samba checks the changed permissions for a file against - the bits set in the <ulink url="smb.conf.5.html#FORCESECURITYMODE"> - <parameter>force security mode</parameter></ulink> parameter. Any bits - that were changed that correspond to bits set to '1' in this parameter - are forced to be set.</para> - - <para>Essentially, bits set in the <parameter>force security mode - </parameter> parameter may be treated as a set of bits that, when - modifying security on a file, the user has always set to be 'on'.</para> - - <para>If not set explicitly this parameter is set to the same value - as the <ulink url="smb.conf.5.html#FORCECREATEMODE"><parameter>force - create mode</parameter></ulink> parameter. - To allow a user to modify all the user/group/world permissions on a file - with no restrictions set this parameter to 000.</para> - - <para>The <parameter>security mask</parameter> and <parameter>force - security mode</parameter> parameters are applied to the change - request in that order.</para> - - <para>For a directory Samba will perform the same operations as - described above for a file except using the parameter <parameter> - directory security mask</parameter> instead of <parameter>security - mask</parameter>, and <parameter>force directory security mode - </parameter> parameter instead of <parameter>force security mode - </parameter>.</para> - - <para>The <parameter>directory security mask</parameter> parameter - by default is set to the same value as the <parameter>directory mask - </parameter> parameter and the <parameter>force directory security - mode</parameter> parameter by default is set to the same value as - the <parameter>force directory mode</parameter> parameter. </para> - - <para>In this way Samba enforces the permission restrictions that - an administrator can set on a Samba share, whilst still allowing users - to modify the permission bits within that restriction.</para> - - <para>If you want to set up a share that allows users full control - in modifying the permission bits on their files and directories and - doesn't force any particular bits to be set 'on', then set the following - parameters in the &smb.conf; file in that share specific section :</para> - - <para><parameter>security mask = 0777</parameter></para> - <para><parameter>force security mode = 0</parameter></para> - <para><parameter>directory security mask = 0777</parameter></para> - <para><parameter>force directory security mode = 0</parameter></para> -</sect1> - -<sect1> - <title>Interaction with the standard Samba file attribute - mapping</title> - - <para>Samba maps some of the DOS attribute bits (such as "read - only") into the UNIX permissions of a file. This means there can - be a conflict between the permission bits set via the security - dialog and the permission bits set by the file attribute mapping. - </para> - - <para>One way this can show up is if a file has no UNIX read access - for the owner it will show up as "read only" in the standard - file attributes tabbed dialog. Unfortunately this dialog is - the same one that contains the security info in another tab.</para> - - <para>What this can mean is that if the owner changes the permissions - to allow themselves read access using the security dialog, clicks - <command>"OK"</command> to get back to the standard attributes tab - dialog, and then clicks <command>"OK"</command> on that dialog, then - NT will set the file permissions back to read-only (as that is what - the attributes still say in the dialog). This means that after setting - permissions and clicking <command>"OK"</command> to get back to the - attributes dialog you should always hit <command>"Cancel"</command> - rather than <command>"OK"</command> to ensure that your changes - are not overridden.</para> -</sect1> - -</chapter> diff --git a/docs/docbook/projdoc/samba-doc.xml b/docs/docbook/projdoc/samba-doc.xml index 8a582cf6e4..c682230330 100644 --- a/docs/docbook/projdoc/samba-doc.xml +++ b/docs/docbook/projdoc/samba-doc.xml @@ -90,27 +90,28 @@ section carefully. <partintro> <title>Valuable Nuts and Bolts Information</title> <para> -Samba has several features that you might want or might not want to use. The chapters in this part each cover specific Samba features. +Samba has several features that you might want or might not want to use. +The chapters in this part each cover specific Samba features. </para> </partintro> &NetworkBrowsing; &Passdb; -&NT-Security; &GROUP-MAPPING-HOWTO; +&AccessControls; +&locking; +&SecuringSamba; +&Trusts; +&MS-Dfs-Setup; &PRINTER-DRIVER2; &CUPS; +&VFS; &WINBIND; &AdvancedNetworkAdmin; &PolicyMgmt; &ProfileMgmt; -&Trusts; &Samba-PAM; -&VFS; -&MS-Dfs-Setup; &IntegratingWithWindows; -&SecuringSamba; &unicode; -&locking; </part> <part id="troubleshooting"> |