while I was at it.....

(This used to be commit 723bcb57e8bd54a36f2c217246f78a4301b6b25b)

1 files changed, 99 insertions, 87 deletions

diff --git a/docs/manpages/smbmount.8 b/docs/manpages/smbmount.8
index 457a940ddb..de241824a4 100644
--- a/docs/manpages/smbmount.8
+++ b/docs/manpages/smbmount.8
@@ -1,87 +1,99 @@
-.TH "smbmount " "1" "25 September 1999" "Samba" "SAMBA" 
-.PP 
-.SH "NAME" 
-smbmount \- mount an SMB filesystem
-.PP 
-.SH "SYNOPSIS" 
-\fBsmbmount\fP service mountpoint [ -o options ]
-.PP 
-.SH "DESCRIPTION" 
-.PP 
-smbmount mounts a SMB filesystem\&. It is usually invoked as mount\&.smb
-from the mount(8) command when using the "-t smb" option\&. The kernel
-must support the smbfs filesystem\&.
-.PP 
-Options to smbmount are specified as a comma separated list of
-key=value pairs\&. 
-.PP 
-NOTE: smbmount calls smbmnt to do the actual mount\&. You must make sure
-that smbmnt is in the path so that it can be found\&.
-.PP 
-.IP "\fBusername=<arg>\fP" 
-specifies the username to connect as\&. If this is
-not given then the environment variable USER is used\&. This option can
-also take the form user%password or user/workgroup or
-user/workgroup%password to allow the password and workgroup to be
-specified as part of the username\&.
-.IP 
-.IP "\fBpassword=<arg>\fP" 
-specifies the SMB password\&. If not given then
-smbmount will prompt for a passeword, unless the guest option is
-given\&.
-.IP 
-.IP "\fBnetbiosname=<arg>\fP" 
-sets the source NetBIOS name\&. It defaults to
-the local hostname\&.
-.IP 
-.IP "\fBuid=<arg>\fP" 
-sets the uid that files will be mounted as\&. It may be
-specified as either a username or a numeric uid\&.
-.IP 
-.IP "\fBgid=<arg>\fP" 
-sets the gid that files will be mounted as\&. It may be
-specified as either a groupname or a numeric gid\&.
-.IP 
-.IP "\fBport=<arg>\fP" 
-sets the remote SMB port number\&. The default is 139\&.
-.IP 
-.IP "\fBfmask=<arg>\fP" 
-sets the file mask\&. This deterines the permissions
-that remote files have in the local filesystem\&. The default is based
-on the current umask\&.
-.IP 
-.IP "\fBdmask=<arg>\fP" 
-sets the directory mask\&. This deterines the
-permissions that remote directories have in the local filesystem\&. The
-default is based on the current umask\&.
-.IP 
-.IP "\fBdebug=<arg>\fP" 
-sets the debug level\&. This is useful for tracking
-down SMB connection problems\&.
-.IP 
-.IP "\fBip=<arg>\fP" 
-sets the destination host or IP address\&.
-.IP 
-.IP "\fBworkgroup=<arg>\fP" 
-sets the workgroup on the destination
-.IP 
-.IP "\fBsockopt=<arg>\fP" 
-sets the TCP socket options\&. See the smb\&.conf
-"socket options" option\&.
-.IP 
-.IP "\fBscope=<arg>\fP" 
-sets the NetBIOS scope
-.IP 
-.IP "\fBguest\fP" 
-don\'t prompt for a password
-.IP 
-.IP "\fBro\fP" 
-mount read-only
-.IP 
-.IP "\fBrw\fP" 
-mount read-write
-.IP 
-.PP 
-.SH "AUTHOR" 
-The maintainer of smbfs, smbmnt and smbmount is Andrew Tridgell
-\fItridge@samba\&.org\fP
+.\" This manpage has been automatically generated by docbook2man-spec
+.\" from a DocBook document.  docbook2man-spec can be found at:
+.\" <http://shell.ipoline.com/~elmert/hacks/docbook2X/> 
+.\" Please send any bug reports, improvements, comments, patches, 
+.\" etc. to Steve Cheng <steve@ggi-project.org>.
+.TH "SMBMOUNT" "8" "22 February 2001" "" ""
+.SH NAME
+smbmount \- mount and smbfs filesystem
+.SH SYNOPSIS
+.sp
+\fBsmbumount\fR \fBservice\fR \fBmount-point\fR [ \fB-o options\fR ] 
+.SH "DESCRIPTION"
+.PP
+\fBsmbmount\fR mounts a SMB filesystem. It 
+is usually invoked as \fBmount.smb\fR from 
+the \fBmount(8)\fR command when using the 
+"-t smb" option. The kernel must support the smbfs filesystem. 
+.PP
+Options to smbmount are specified as a comma separated list 
+of key=value pairs.
+.PP
+\fBNOTE:\fR \fBsmbmount\fR 
+calls \fBsmbmnt(8)\fR to do the actual mount. You 
+must make sure that \fBsmbmnt\fR is in the path so 
+that it can be found. 
+.SH "OPTIONS"
+.TP
+\fBusername=<arg>\fR
+specifies the username to connect as. If
+this is not given then the environment variable \fI $USER\fR is used. This option can also take the 
+form "user%password" or "user/workgroup" or 
+"user/workgroup%password" to allow the password and workgroup 
+to be specified as part of the username.
+.TP
+\fBpassword=<arg>\fR
+specifies the SMB password. If not given then 
+\fBsmbmount\fR will prompt for a passeword, unless 
+the guest option is given. 
+.TP
+\fBnetbiosname=<arg>\fR
+sets the source NetBIOS name. It defaults 
+to the local hostname. 
+.TP
+\fBuid=<arg>\fR
+sets the uid that files will be mounted as. 
+It may be specified as either a username or a numeric uid.
+.TP
+\fBgid=<arg>\fR
+sets the gid that files will be mounted as. 
+It may be specified as either a groupname or a numeric 
+gid. 
+.TP
+\fBport=<arg>\fR
+sets the remote SMB port number. The default 
+is 139. 
+.TP
+\fBfmask=<arg>\fR
+sets the file mask. This determines the 
+permissions that remote files have in the local filesystem. 
+The default is based on the current umask. 
+.TP
+\fBdmask=<arg>\fR
+sets the directory mask. This deterines the 
+permissions that remote directories have in the local filesystem. 
+The default is based on the current umask. 
+.TP
+\fBdebug=<arg>\fR
+sets the debug level. This is useful for 
+tracking down SMB connection problems. 
+.TP
+\fBip=<arg>\fR
+sets the destination host or IP address.
+.TP
+\fBworkgroup=<arg>\fR
+sets the workgroup on the destination 
+.TP
+\fBsockopt=<arg>\fR
+sets the TCP socket options. See the \fIsmb.conf
+\fR <URL:smb.conf.5.html#SOCKETOPTIONS> \fIsocket options\fR option.
+.TP
+\fBscope=<arg>\fR
+sets the NetBIOS scope 
+.TP
+\fBguest\fR
+don't prompt for a password 
+.TP
+\fBro\fR
+mount read-only 
+.TP
+\fBrw\fR
+mount read-write 
+.SH "AUTHOR"
+.PP
+The current maintainer of smbfs and the userspace
+tools \fBsmbmount\fR, \fBsmbumount\fR,
+and \fBsmbmnt\fR is Urban Widmark <URL:mailto:urban@teststation.com>
+.PP
+The conversion of this manpage for Samba 2.2 was performed 
+by Gerald Carter