summaryrefslogtreecommitdiff
path: root/docs/manpages
diff options
context:
space:
mode:
authorGerald Carter <jerry@samba.org>2001-02-20 03:25:13 +0000
committerGerald Carter <jerry@samba.org>2001-02-20 03:25:13 +0000
commitb5ad6a0a0b9a856e981b8bc46ba38fbc16a8d54c (patch)
treefb0c3186780d24d7c6abc1c7ac7ab9e6f17c5bb7 /docs/manpages
parentaa9a0c79ba7f3ec2dfe3a3455d64de2355be0562 (diff)
downloadsamba-b5ad6a0a0b9a856e981b8bc46ba38fbc16a8d54c.tar.gz
samba-b5ad6a0a0b9a856e981b8bc46ba38fbc16a8d54c.tar.bz2
samba-b5ad6a0a0b9a856e981b8bc46ba38fbc16a8d54c.zip
more autogen files from the latest SGML/DocBook checkins
(This used to be commit c51efe6a2d88717d2d3186e21285e3dcdc242831)
Diffstat (limited to 'docs/manpages')
-rw-r--r--docs/manpages/nmbd.8459
-rw-r--r--docs/manpages/smbd.8876
2 files changed, 695 insertions, 640 deletions
diff --git a/docs/manpages/nmbd.8 b/docs/manpages/nmbd.8
index 55930f6629..fa5e406683 100644
--- a/docs/manpages/nmbd.8
+++ b/docs/manpages/nmbd.8
@@ -1,220 +1,243 @@
-.TH "nmbd" "8" "23 Oct 1998" "Samba" "SAMBA"
-.PP
-.SH "NAME"
-nmbd \- NetBIOS name server to provide NetBIOS over IP
-naming services to clients
-.PP
-.SH "SYNOPSIS"
-.PP
-\fBnmbd\fP [-D] [-a] [-o] [-h] [-V] [-H lmhosts file] [-d debuglevel] [-l log file basename] [-n primary NetBIOS name] [-p port number] [-s configuration file]
-.PP
-.SH "DESCRIPTION"
-.PP
-This program is part of the \fBSamba\fP suite\&.
-.PP
-\fBnmbd\fP is a server that understands and can reply to NetBIOS over IP
-name service requests, like those produced by SMBD/CIFS clients such
-as Windows 95/98, Windows NT and LanManager clients\&. It also
-participates in the browsing protocols which make up the Windows
-"Network Neighborhood" view\&.
-.PP
-SMB/CIFS clients, when they start up, may wish to locate an SMB/CIFS
-server\&. That is, they wish to know what IP number a specified host is
-using\&.
-.PP
-Amongst other services, \fBnmbd\fP will listen for such requests,
-and if its own NetBIOS name is specified it will respond with the IP
-number of the host it is running on\&. Its "own NetBIOS name" is by
-default the primary DNS name of the host it is running on, but this
-can be overridden with the \fB-n\fP option (see OPTIONS below)\&. Thus
-\fBnmbd\fP will reply to broadcast queries for its own name(s)\&. Additional
-names for \fBnmbd\fP to respond on can be set via parameters in the
-\fBsmb\&.conf(5)\fP configuration file\&.
-.PP
-\fBnmbd\fP can also be used as a WINS (Windows Internet Name Server)
-server\&. What this basically means is that it will act as a WINS
-database server, creating a database from name registration requests
-that it receives and replying to queries from clients for these names\&.
-.PP
-In addition, \fBnmbd\fP can act as a WINS proxy, relaying broadcast queries
-from clients that do not understand how to talk the WINS protocol to a
-WIN server\&.
-.PP
-.SH "OPTIONS"
-.PP
-.IP
-.IP "\fB-D\fP"
-If specified, this parameter causes \fBnmbd\fP to operate
-as a daemon\&. That is, it detaches itself and runs in the background,
-fielding requests on the appropriate port\&. By default, \fBnmbd\fP will
-NOT operate as a daemon\&. nmbd can also be operated from the inetd
-meta-daemon, although this is not recommended\&.
-.IP
-.IP "\fB-a\fP"
-If this parameter is specified, each new connection will
-append log messages to the log file\&. This is the default\&.
-.IP
-.IP "\fB-o\fP"
-If this parameter is specified, the log files will be
-overwritten when opened\&. By default, the log files will be appended
-to\&.
-.IP
-.IP "\fB-h\fP"
-Prints the help information (usage) for \fBnmbd\fP\&.
-.IP
-.IP "\fB-V\fP"
-Prints the version number for \fBnmbd\fP\&.
-.IP
-.IP "\fB-H filename\fP"
-NetBIOS lmhosts file\&.
-.IP
-The lmhosts file is a list of NetBIOS names to IP addresses that is
-loaded by the nmbd server and used via the name resolution mechanism
-\fBname resolve order\fP described in
-\fBsmb\&.conf (5)\fP to resolve any
-NetBIOS name queries needed by the server\&. Note that the contents of
-this file are \fINOT\fP used by \fBnmbd\fP to answer any name queries\&. Adding
-a line to this file affects name NetBIOS resolution from this host
-\fIONLY\fP\&.
-.IP
-The default path to this file is compiled into Samba as part of the
-build process\&. Common defaults are \fI/usr/local/samba/lib/lmhosts\fP,
-\fI/usr/samba/lib/lmhosts\fP or \fI/etc/lmhosts\fP\&. See the
-\fBlmhosts (5)\fP man page for details on the contents of this file\&.
-.IP
-.IP "\fB-d debuglevel\fP"
-debuglevel is an integer from 0 to 10\&.
-.IP
-The default value if this parameter is not specified is zero\&.
-.IP
-The higher this value, the more detail will be logged to the log files
-about the activities of the server\&. At level 0, only critical errors
-and serious warnings will be logged\&. Level 1 is a reasonable level for
-day to day running - it generates a small amount of information about
-operations carried out\&.
-.IP
-Levels above 1 will generate considerable amounts of log data, and
-should only be used when investigating a problem\&. Levels above 3 are
-designed for use only by developers and generate HUGE amounts of log
-data, most of which is extremely cryptic\&.
-.IP
-Note that specifying this parameter here will override the \fBlog
-level\fP parameter in the \fBsmb\&.conf
-(5)\fP file\&.
-.IP
-.IP "\fB-l logfile\fP"
-The \fB-l\fP parameter specifies a path and base
-filename into which operational data from the running nmbd server will
-be logged\&. The actual log file name is generated by appending the
-extension "\&.nmb" to the specified base name\&. For example, if the name
-specified was "log" then the file log\&.nmb would contain the debugging
-data\&.
-.IP
-The default log file path is compiled into Samba as part of the
-build process\&. Common defaults are \fI/usr/local/samba/var/log\&.nmb\fP,
-\fI/usr/samba/var/log\&.nmb\fP or \fI/var/log/log\&.nmb\fP\&.
-.IP
-.IP "\fB-n primary NetBIOS name\fP"
+.\" This manpage has been automatically generated by docbook2man-spec
+.\" from a DocBook document. docbook2man-spec can be found at:
+.\" <http://shell.ipoline.com/~elmert/hacks/docbook2X/>
+.\" Please send any bug reports, improvements, comments, patches,
+.\" etc. to Steve Cheng <steve@ggi-project.org>.
+.TH "NMBD" "8" "19 February 2001" "" ""
+.SH NAME
+nmbd \- NetBIOS name server to provide NetBIOS over IP naming services to clients
+.SH SYNOPSIS
+.sp
+\fBsmbd\fR [ \fB-D\fR ] [ \fB-a\fR ] [ \fB-o\fR ] [ \fB-P\fR ] [ \fB-h\fR ] [ \fB-V\fR ] [ \fB-d <debug level>\fR ] [ \fB-H <lmhosts file>\fR ] [ \fB-l <log file>\fR ] [ \fB-n <primary netbios name>\fR ] [ \fB-p <port number>\fR ] [ \fB-s <configuration file>\fR ]
+.SH "DESCRIPTION"
+.PP
+This program is part of the Samba suite.
+.PP
+\fBnmbd\fR is a server that understands
+and can reply to NetBIOS over IP name service requests, like
+those produced by SMBD/CIFS clients such as Windows 95/98/ME,
+Windows NT, Windows 2000, and LanManager clients. It also
+participates in the browsing protocols which make up the
+Windows |[[quot ]]|Network Neighborhood|[[quot ]]| view.
+.PP
+SMB/CIFS clients, when they start up, may wish to
+locate an SMB/CIFS server. That is, they wish to know what
+IP number a specified host is using.
+.PP
+Amongst other services, \fBnmbd\fR will
+listen for such requests, and if its own NetBIOS name is
+specified it will respond with the IP number of the host it
+is running on. Its |[[quot ]]|own NetBIOS name|[[quot ]]| is by
+default the primary DNS name of the host it is running on,
+but this can be overridden with the \fB-n\fR
+option (see OPTIONS below). Thus \fBnmbd\fR will
+reply to broadcast queries for its own name(s). Additional
+names for \fBnmbd\fR to respond on can be set
+via parameters in the \fI smb.conf(5)\fR <URL:smb.conf.5.html> configuration file.
+.PP
+\fBnmbd\fR can also be used as a WINS
+(Windows Internet Name Server) server. What this basically means
+is that it will act as a WINS database server, creating a
+database from name registration requests that it receives and
+replying to queries from clients for these names.
+.PP
+In addition, \fBnmbd\fR can act as a WINS
+proxy, relaying broadcast queries from clients that do
+not understand how to talk the WINS protocol to a WIN
+server.
+.SH "OPTIONS"
+.TP
+\fB-D\fR
+If specified, this parameter causes
+\fBnmbd\fR to operate as a daemon. That is,
+it detaches itself and runs in the background, fielding
+requests on the appropriate port. By default, \fBnmbd\fR
+will operate as a daemon if launched from a command shell.
+nmbd can also be operated from the \fBinetd\fR
+meta-daemon, although this is not recommended.
+.TP
+\fB-a\fR
+If this parameter is specified, each new
+connection will append log messages to the log file.
+This is the default.
+.TP
+\fB-o\fR
+If this parameter is specified, the
+log files will be overwritten when opened. By default,
+\fBsmbd\fR will append entries to the log
+files.
+.TP
+\fB-h\fR
+Prints the help information (usage)
+for \fBnmbd\fR.
+.TP
+\fB-H <filename>\fR
+NetBIOS lmhosts file. The lmhosts
+file is a list of NetBIOS names to IP addresses that
+is loaded by the nmbd server and used via the name
+resolution mechanism name resolve order <URL:smb.conf.5.html#nameresolveorder> described in \fIsmb.conf(5)\fR <URL:smb.conf.5.html>
+to resolve any NetBIOS name queries needed by the server. Note
+that the contents of this file are \fBNOT\fR
+used by \fBnmbd\fR to answer any name queries.
+Adding a line to this file affects name NetBIOS resolution
+from this host \fBONLY\fR.
+
+The default path to this file is compiled into
+Samba as part of the build process. Common defaults
+are \fI/usr/local/samba/lib/lmhosts\fR,
+\fI/usr/samba/lib/lmhosts\fR or
+\fI/etc/lmhosts\fR. See the \fIlmhosts(5)\fR <URL:lmhosts.5.html> man page for details on the
+contents of this file.
+.TP
+\fB-V\fR
+Prints the version number for
+\fBnmbd\fR.
+.TP
+\fB-d <debug level>\fR
+debuglevel is an integer
+from 0 to 10. The default value if this parameter is
+not specified is zero.
+
+The higher this value, the more detail will
+be logged to the log files about the activities of the
+server. At level 0, only critical errors and serious
+warnings will be logged. Level 1 is a reasonable level for
+day to day running - it generates a small amount of
+information about operations carried out.
+
+Levels above 1 will generate considerable amounts
+of log data, and should only be used when investigating
+a problem. Levels above 3 are designed for use only by developers
+and generate HUGE amounts of log data, most of which is extremely
+cryptic.
+
+Note that specifying this parameter here will override
+the log level <URL:smb.conf.5.html#loglevel>
+parameter in the \fI smb.conf\fR <URL:smb.conf.5.html> file.
+.TP
+\fB-l <log file>\fR
+The -l parameter specifies a path
+and base filename into which operational data from
+the running \fBnmbd\fR server will
+be logged. The actual log file name is generated by
+appending the extension |[[quot ]]|.nmb|[[quot ]]| to the specified base
+name. For example, if the name specified was |[[quot ]]|log|[[quot ]]|
+then the file log.nmb would contain the debugging data.
+
+The default log file path is compiled into Samba as
+part of the build process. Common defaults are \fI /usr/local/samba/var/log.nmb\fR, \fI /usr/samba/var/log.nmb\fR or
+\fI/var/log/log.nmb\fR.
+.TP
+\fB-n <primary NetBIOS name>\fR
This option allows you to override
-the NetBIOS name that Samba uses for itself\&. This is identical to
-setting the \fBNetBIOS name\fP parameter
-in the \fBsmb\&.conf\fP file
-but will override the setting in the \fBsmb\&.conf\fP file\&.
-.IP
-.IP "\fB-p UDP port number\fP"
-UDP port number is a positive integer value\&.
-.IP
-This option changes the default UDP port number (normally 137) that
-\fBnmbd\fP responds to name queries on\&. Don\'t use this option unless you are
-an expert, in which case you won\'t need help!
-.IP
-.IP "\fB-s configuration file\fP"
-The default configuration file name is
-set at build time, typically as \fI/usr/local/samba/lib/smb\&.conf\fP, but
-this may be changed when Samba is autoconfigured\&.
-.IP
-The file specified contains the configuration details required by the
-server\&. See \fBsmb\&.conf (5)\fP for more information\&.
-.IP
-.PP
-.SH "FILES"
-.PP
-\fB/etc/inetd\&.conf\fP
-.PP
-If the server is to be run by the inetd meta-daemon, this file must
-contain suitable startup information for the meta-daemon\&.
-.PP
-\fB/etc/rc\fP
-.PP
-(or whatever initialization script your system uses)\&.
-.PP
-If running the server as a daemon at startup, this file will need to
-contain an appropriate startup sequence for the server\&.
-.PP
-\fB/usr/local/samba/lib/smb\&.conf\fP
-.PP
+the NetBIOS name that Samba uses for itself. This is identical
+to setting the NetBIOS name <URL:smb.conf.5.html#netbiosname> parameter in the
+\fIsmb.conf\fR <URL:smb.conf.5.html> file. However, a command
+line setting will take precedence over settings in
+\fIsmb.conf\fR.
+.TP
+\fB-p <UDP port number>\fR
+UDP port number is a positive integer value.
+This option changes the default UDP port number (normally 137)
+that \fBnmbd\fR responds to name queries on. Don't
+use this option unless you are an expert, in which case you
+won't need help!
+.TP
+\fB-s <configuration file>\fR
+The default configuration file name
+is set at build time, typically as \fI /usr/local/samba/lib/smb.conf\fR, but
+this may be changed when Samba is autoconfigured.
+
+The file specified contains the configuration details
+required by the server. See
+\fIsmb.conf(5)\fR <URL:smb.conf.5.html> for more information.
+.SH "FILES"
+.TP
+\fB\fI/etc/inetd.conf\fB\fR
+If the server is to be run by the
+\fBinetd\fR meta-daemon, this file
+must contain suitable startup information for the
+meta-daemon. See the section INSTALLATION below.
+.TP
+\fB\fI/etc/rc\fB\fR
+or whatever initialization script your
+system uses).
+
+If running the server as a daemon at startup,
+this file will need to contain an appropriate startup
+sequence for the server. See the section INSTALLATION
+below.
+.TP
+\fB\fI/etc/services\fB\fR
+If running the server via the
+meta-daemon \fBinetd\fR, this file
+must contain a mapping of service name (e.g., netbios-ssn)
+to service port (e.g., 139) and protocol type (e.g., tcp).
+See the section INSTALLATION below.
+.TP
+\fB\fI/usr/local/samba/lib/smb.conf\fB\fR
This is the default location of the
-\fBsmb\&.conf\fP server configuration
-file\&. Other common places that systems install this file are
-\fI/usr/samba/lib/smb\&.conf\fP and \fI/etc/smb\&.conf\fP\&.
-.PP
-When run as a \fBWINS\fP server (see the \fBwins support\fP
-parameter in the \fBsmb\&.conf (5)\fP man page), \fBnmbd\fP will
-store the WINS database in the file \f(CWwins\&.dat\fP in the \f(CWvar/locks\fP directory
-configured under wherever Samba was configured to install itself\&.
-.PP
-If \fBnmbd\fP is acting as a \fBbrowse master\fP (see the \fBlocal master\fP
-parameter in the \fBsmb\&.conf (5)\fP man page), \fBnmbd\fP will
-store the browsing database in the file \f(CWbrowse\&.dat\fP in the \f(CWvar/locks\fP directory
-configured under wherever Samba was configured to install itself\&.
-.PP
-.SH "SIGNALS"
-.PP
-To shut down an \fBnmbd\fP process it is recommended that SIGKILL (-9)
-\fINOT\fP be used, except as a last resort, as this may leave the name
-database in an inconsistent state\&. The correct way to terminate
-\fBnmbd\fP is to send it a SIGTERM (-15) signal and wait for it to die on
-its own\&.
-.PP
-\fBnmbd\fP will accept SIGHUP, which will cause it to dump out it\'s
-namelists into the file \f(CWnamelist\&.debug\fP in the
-\fI/usr/local/samba/var/locks\fP directory (or the \fIvar/locks\fP
-directory configured under wherever Samba was configured to install
-itself)\&. This will also cause \fBnmbd\fP to dump out it\'s server database in
-the log\&.nmb file\&. In addition, the debug log level of nmbd may be raised
-by sending it a SIGUSR1 (\f(CWkill -USR1 <nmbd-pid>\fP) and lowered by sending it a
-SIGUSR2 (\f(CWkill -USR2 <nmbd-pid>\fP)\&. This is to allow transient
-problems to be diagnosed, whilst still running at a normally low log
-level\&.
-.PP
-.SH "VERSION"
-.PP
-This man page is correct for version 2\&.0 of the Samba suite\&.
-.PP
-.SH "SEE ALSO"
-.PP
-\fBinetd (8)\fP, \fBsmbd (8)\fP, \fBsmb\&.conf
-(5)\fP, \fBsmbclient (1)\fP,
-\fBtestparm (1)\fP, \fBtestprns
-(1)\fP, and the Internet RFC\'s \fBrfc1001\&.txt\fP,
-\fBrfc1002\&.txt\fP\&. In addition the CIFS (formerly SMB) specification is
-available as a link from the Web page :
-http://samba\&.org/cifs/\&.
-.PP
-.SH "AUTHOR"
-.PP
-The original Samba software and related utilities were created by
-Andrew Tridgell samba@samba\&.org\&. Samba is now developed
-by the Samba Team as an Open Source project similar to the way the
-Linux kernel is developed\&.
-.PP
-The original Samba man pages were written by Karl Auer\&. The man page
-sources were converted to YODL format (another excellent piece of Open
-Source software, available at
-\fBftp://ftp\&.icce\&.rug\&.nl/pub/unix/\fP)
-and updated for the Samba2\&.0 release by Jeremy Allison\&.
-samba@samba\&.org\&.
-.PP
-See \fBsamba (7)\fP to find out how to get a full
-list of contributors and details on how to submit bug reports,
-comments etc\&.
+\fIsmb.conf\fR <URL:smb.conf.5.html>
+server configuration file. Other common places that systems
+install this file are \fI/usr/samba/lib/smb.conf\fR
+and \fI/etc/smb.conf\fR.
+
+When run as a WINS server (see the
+wins support <URL:smb.conf.5.html#winssupport>
+parameter in the \fI smb.conf(5)\fR <URL:smb.conf.5.html> man page), \fBnmbd\fR
+will store the WINS database in the file \fIwins.dat\fR
+in the \fIvar/locks\fR directory configured under
+wherever Samba was configured to install itself.
+
+If \fBnmbd\fR is acting as a \fB browse master\fR (see the local master <URL:smb.conf.5.html#localmaster>
+parameter in the \fI smb.conf(5)\fR <URL:smb.conf.5.html> man page), \fBnmbd\fR
+will store the browsing database in the file \fIbrowse.dat
+\fRin the \fIvar/locks\fR directory
+configured under wherever Samba was configured to install itself.
+.SH "SIGNALS"
+.PP
+To shut down an \fBnmbd\fR process it is recommended
+that SIGKILL (-9) \fBNOT\fR be used, except as a last
+resort, as this may leave the name database in an inconsistent state.
+The correct way to terminate \fBnmbd\fR is to send it
+a SIGTERM (-15) signal and wait for it to die on its own.
+.PP
+\fBnmbd\fR will accept SIGHUP, which will cause
+it to dump out it's namelists into the file \fInamelist.debug
+\fRin the \fI/usr/local/samba/var/locks\fR
+directory (or the \fIvar/locks\fR directory configured
+under wherever Samba was configured to install itself). This will also
+cause \fBnmbd\fR to dump out it's server database in
+the \fIlog.nmb\fR file. In addition, the debug log level
+of nmbd may be raised by sending it a SIGUSR1 (\fBkill -USR1
+<nmbd-pid>\fR) and lowered by sending it a
+SIGUSR2 (\fBkill -USR2 <nmbd-pid>\fR). This is to
+allow transient problems to be diagnosed, whilst still running at a
+normally low log level.
+.SH "VERSION"
+.PP
+This man page is correct for version 2.2 of
+the Samba suite.
+.SH "SEE ALSO"
+.PP
+\fBinetd(8)\fR, \fBsmbd(8)\fR <URL:smbd.8.html>,
+\fIsmb.conf(5)\fR
+ <URL:smb.conf.5.html>, \fBsmbclient(1)
+\fR <URL:smbclient.1.html>, \fB testparm(1)\fR <URL:testparm.1.html>, \fBtestprns(1)\fR <URL:testprns.1.html>, and the Internet RFC's
+\fIrfc1001.txt\fR, \fIrfc1002.txt\fR.
+In addition the CIFS (formerly SMB) specification is available
+as a link from the Web page
+http://samba.org/cifs/ <URL:http://samba.org/cifs/>.
+.SH "AUTHOR"
+.PP
+The original Samba software and related utilities
+were created by Andrew Tridgell. Samba is now developed
+by the Samba Team as an Open Source project similar
+to the way the Linux kernel is developed.
+.PP
+The original Samba man pages were written by Karl Auer.
+The man page sources were converted to YODL format (another
+excellent piece of Open Source software, available at
+ftp://ftp.icce.rug.nl/pub/unix/ <URL:ftp://ftp.icce.rug.nl/pub/unix/>) and updated for the Samba 2.0
+release by Jeremy Allison. The conversion to DocBook for
+Samba 2.2 was done by Gerald Carter
diff --git a/docs/manpages/smbd.8 b/docs/manpages/smbd.8
index 5ee6cd5308..ea09dee84f 100644
--- a/docs/manpages/smbd.8
+++ b/docs/manpages/smbd.8
@@ -1,430 +1,462 @@
-.TH "smbd " "8" "23 Oct 1998" "Samba" "SAMBA"
-.PP
-.SH "NAME"
+.\" This manpage has been automatically generated by docbook2man-spec
+.\" from a DocBook document. docbook2man-spec can be found at:
+.\" <http://shell.ipoline.com/~elmert/hacks/docbook2X/>
+.\" Please send any bug reports, improvements, comments, patches,
+.\" etc. to Steve Cheng <steve@ggi-project.org>.
+.TH "SMBD" "8" "19 February 2001" "" ""
+.SH NAME
smbd \- server to provide SMB/CIFS services to clients
-.PP
-.SH "SYNOPSIS"
-.PP
-\fBsmbd\fP [-D] [-a] [-o] [-P] [-h] [-V] [-d debuglevel] [-l log file] [-p port number] [-O socket options] [-s configuration file]
-.PP
-.SH "DESCRIPTION"
-.PP
-This program is part of the \fBSamba\fP suite\&.
-.PP
-\fBsmbd\fP is the server daemon that provides filesharing and printing
-services to
-Windows clients\&. The server provides filespace and printer services to
-clients using the SMB (or CIFS) protocol\&. This is compatible with the
-LanManager protocol, and can service LanManager clients\&. These
-include MSCLIENT 3\&.0 for DOS, Windows for Workgroups, Windows 95,
-Windows NT, OS/2, DAVE for Macintosh, and smbfs for Linux\&.
-.PP
-An extensive description of the services that the server can provide
-is given in the man page for the configuration file controlling the
-attributes of those services (see
-\fBsmb\&.conf (5)\fP\&. This man page
-will not describe the services, but will concentrate on the
-administrative aspects of running the server\&.
-.PP
-Please note that there are significant security implications to
-running this server, and the
-\fBsmb\&.conf (5)\fP manpage should be
-regarded as mandatory reading before proceeding with installation\&.
-.PP
-A session is created whenever a client requests one\&. Each client gets
-a copy of the server for each session\&. This copy then services all
-connections made by the client during that session\&. When all
-connections from its client are closed, the copy of the server for
-that client terminates\&.
-.PP
-The configuration file, and any files that it includes, are
-automatically reloaded every minute, if they change\&. You can force a
-reload by sending a SIGHUP to the server\&. Reloading the configuration
-file will not affect connections to any service that is already
-established\&. Either the user will have to disconnect from the
-service, or smbd killed and restarted\&.
-.PP
-.SH "OPTIONS"
-.PP
-.IP
-.IP "\fB-D\fP"
-If specified, this parameter causes the server to operate as a
-daemon\&. That is, it detaches itself and runs in the background,
-fielding requests on the appropriate port\&. Operating the server as a
-daemon is the recommended way of running smbd for servers that provide
-more than casual use file and print services\&.
-.IP
-By default, the server will NOT operate as a daemon\&.
-.IP
-.IP "\fB-a\fP"
-If this parameter is specified, each new connection will
-append log messages to the log file\&. This is the default\&.
-.IP
-.IP "\fB-o\fP"
-If this parameter is specified, the log files will be
-overwritten when opened\&. By default, the log files will be appended
-to\&.
-.IP
-.IP "\fB-P\fP"
-Passive option\&. Causes smbd not to send any network traffic
-out\&. Used for debugging by the developers only\&.
-.IP
-.IP "\fB-h\fP"
-Prints the help information (usage) for \fBsmbd\fP\&.
-.IP
-.IP "\fB-V\fP"
-Prints the version number for \fBsmbd\fP\&.
-.IP
-.IP "\fB-d debuglevel\fP"
-debuglevel is an integer from 0 to 10\&.
-.IP
-The default value if this parameter is not specified is zero\&.
-.IP
-The higher this value, the more detail will be logged to the log files
-about the activities of the server\&. At level 0, only critical errors
-and serious warnings will be logged\&. Level 1 is a reasonable level for
-day to day running - it generates a small amount of information about
-operations carried out\&.
-.IP
-Levels above 1 will generate considerable amounts of log data, and
-should only be used when investigating a problem\&. Levels above 3 are
-designed for use only by developers and generate HUGE amounts of log
-data, most of which is extremely cryptic\&.
-.IP
-Note that specifying this parameter here will override the \fBlog
-level\fP parameter in the \fBsmb\&.conf
-(5)\fP file\&.
-.IP
-.IP "\fB-l log file\fP"
-If specified, \fIlog file\fP specifies
-a log filename into which informational and debug messages from the
-running server will be logged\&. The log file generated is never removed
-by the server although its size may be controlled by the \fBmax
-log size\fP option in the \fBsmb\&.conf
-(5)\fP file\&. The default log file name is specified
-at compile time\&.
-.IP
-.IP "\fB-O socket options\fP"
-See the \fBsocket
-options\fP parameter in the
-\fBsmb\&.conf (5)\fP file for details\&.
-.IP
-.IP "\fB-p port number\fP"
-port number is a positive integer value\&. The
-default value if this parameter is not specified is 139\&.
-.IP
-This number is the port number that will be used when making
-connections to the server from client software\&. The standard
-(well-known) port number for the SMB over TCP is 139, hence the
-default\&. If you wish to run the server as an ordinary user rather than
-as root, most systems will require you to use a port number greater
-than 1024 - ask your system administrator for help if you are in this
-situation\&.
-.IP
-In order for the server to be useful by most clients, should you
-configure it on a port other than 139, you will require port
-redirection services on port 139, details of which are outlined in
-rfc1002\&.txt section 4\&.3\&.5\&.
-.IP
-This parameter is not normally specified except in the above
-situation\&.
-.IP
-.IP "\fB-s configuration file\fP"
-The file specified contains the configuration details required by the
-server\&. The information in this file includes server-specific
-information such as what printcap file to use, as well as descriptions
-of all the services that the server is to provide\&. See \fBsmb\&.conf
-(5)\fP for more information\&.
-The default configuration file name is determined at compile time\&.
-.IP
-.PP
-.SH "FILES"
-.PP
-\fB/etc/inetd\&.conf\fP
-.PP
-If the server is to be run by the inetd meta-daemon, this file must
-contain suitable startup information for the meta-daemon\&. See the
-section INSTALLATION below\&.
-.PP
-\fB/etc/rc\fP
-.PP
-(or whatever initialization script your system uses)\&.
-.PP
-If running the server as a daemon at startup, this file will need to
-contain an appropriate startup sequence for the server\&. See the
-section INSTALLATION below\&.
-.PP
-\fB/etc/services\fP
-.PP
-If running the server via the meta-daemon inetd, this file must
-contain a mapping of service name (e\&.g\&., netbios-ssn) to service port
-(e\&.g\&., 139) and protocol type (e\&.g\&., tcp)\&. See the section
-INSTALLATION below\&.
-.PP
-\fB/usr/local/samba/lib/smb\&.conf\fP
-.PP
-This is the default location of the \fIsmb\&.conf\fP server configuration
-file\&. Other common places that systems install this file are
-\fI/usr/samba/lib/smb\&.conf\fP and \fI/etc/smb\&.conf\fP\&.
-.PP
-This file describes all the services the server is to make available
-to clients\&. See \fBsmb\&.conf (5)\fP for more information\&.
-.PP
-.SH "LIMITATIONS"
-.PP
-On some systems \fBsmbd\fP cannot change uid back to root after a
-setuid() call\&. Such systems are called "trapdoor" uid systems\&. If you
-have such a system, you will be unable to connect from a client (such
-as a PC) as two different users at once\&. Attempts to connect the
-second user will result in "access denied" or similar\&.
-.PP
-.SH "ENVIRONMENT VARIABLES"
-.PP
-\fBPRINTER\fP
-.PP
-If no printer name is specified to printable services, most systems
-will use the value of this variable (or "lp" if this variable is not
-defined) as the name of the printer to use\&. This is not specific to
-the server, however\&.
-.PP
-.SH "INSTALLATION"
-.PP
-The location of the server and its support files is a matter for
-individual system administrators\&. The following are thus suggestions
-only\&.
-.PP
-It is recommended that the server software be installed under the
-/usr/local/samba hierarchy, in a directory readable by all, writeable
-only by root\&. The server program itself should be executable by all,
-as users may wish to run the server themselves (in which case it will
-of course run with their privileges)\&. The server should NOT be
-setuid\&. On some systems it may be worthwhile to make smbd setgid to an
-empty group\&. This is because some systems may have a security hole
-where daemon processes that become a user can be attached to with a
-debugger\&. Making the smbd file setgid to an empty group may prevent
-this hole from being exploited\&. This security hole and the suggested
-fix has only been confirmed on old versions (pre-kernel 2\&.0) of Linux
-at the time this was written\&. It is possible that this hole only
-exists in Linux, as testing on other systems has thus far shown them
-to be immune\&.
-.PP
-The server log files should be put in a directory readable and
-writeable only by root, as the log files may contain sensitive
-information\&.
-.PP
-The configuration file should be placed in a directory readable and
-writeable only by root, as the configuration file controls security for
-the services offered by the server\&. The configuration file can be made
-readable by all if desired, but this is not necessary for correct
-operation of the server and is not recommended\&. A sample configuration
-file "smb\&.conf\&.sample" is supplied with the source to the server -
-this may be renamed to "smb\&.conf" and modified to suit your needs\&.
-.PP
-The remaining notes will assume the following:
-.PP
-.IP
-.IP o
-\fBsmbd\fP (the server program) installed in /usr/local/samba/bin
-.IP
-.IP o
-\fBsmb\&.conf\fP (the configuration file) installed in /usr/local/samba/lib
-.IP
-.IP o
-log files stored in /var/adm/smblogs
-.IP
-.PP
-The server may be run either as a daemon by users or at startup, or it
-may be run from a meta-daemon such as inetd upon request\&. If run as a
-daemon, the server will always be ready, so starting sessions will be
-faster\&. If run from a meta-daemon some memory will be saved and
-utilities such as the tcpd TCP-wrapper may be used for extra security\&.
-For serious use as file server it is recommended that \fBsmbd\fP be run
-as a daemon\&.
-.PP
-When you\'ve decided, continue with either
-RUNNING THE SERVER AS A DAEMON or
-RUNNING THE SERVER ON REQUEST\&.
-.PP
-.SH "RUNNING THE SERVER AS A DAEMON"
-.PP
-To run the server as a daemon from the command line, simply put the
-\fB-D\fP option on the command line\&. There is no need to place an
-ampersand at the end of the command line - the \fB-D\fP option causes
-the server to detach itself from the tty anyway\&.
-.PP
-Any user can run the server as a daemon (execute permissions
-permitting, of course)\&. This is useful for testing purposes, and may
-even be useful as a temporary substitute for something like ftp\&. When
-run this way, however, the server will only have the privileges of the
-user who ran it\&.
-.PP
-To ensure that the server is run as a daemon whenever the machine is
-started, and to ensure that it runs as root so that it can serve
-multiple clients, you will need to modify the system startup
-files\&. Wherever appropriate (for example, in /etc/rc), insert the
-following line, substituting port number, log file location,
-configuration file location and debug level as desired:
-.PP
-\f(CW/usr/local/samba/bin/smbd -D -l /var/adm/smblogs/log -s /usr/local/samba/lib/smb\&.conf\fP
-.PP
-(The above should appear in your initialization script as a single line\&.
-Depending on your terminal characteristics, it may not appear that way in
-this man page\&. If the above appears as more than one line, please treat any
-newlines or indentation as a single space or TAB character\&.)
-.PP
-If the options used at compile time are appropriate for your system,
-all parameters except \fB-D\fP may be
-omitted\&. See the section OPTIONS above\&.
-.PP
-.SH "RUNNING THE SERVER ON REQUEST"
-.PP
-If your system uses a meta-daemon such as \fBinetd\fP, you can arrange to
-have the smbd server started whenever a process attempts to connect to
-it\&. This requires several changes to the startup files on the host
-machine\&. If you are experimenting as an ordinary user rather than as
-root, you will need the assistance of your system administrator to
-modify the system files\&.
-.PP
-You will probably want to set up the NetBIOS name server \fBnmbd\fP at
-the same time as \fBsmbd\fP\&. To do this refer to the man page for
-\fBnmbd (8)\fP\&.
-.PP
-First, ensure that a port is configured in the file \f(CW/etc/services\fP\&. The
-well-known port 139 should be used if possible, though any port may be
-used\&.
-.PP
-Ensure that a line similar to the following is in \f(CW/etc/services\fP:
-.PP
-\f(CWnetbios-ssn 139/tcp\fP
-.PP
-Note for NIS/YP users - you may need to rebuild the NIS service maps
-rather than alter your local \f(CW/etc/services file\fP\&.
-.PP
-Next, put a suitable line in the file \f(CW/etc/inetd\&.conf\fP (in the unlikely
-event that you are using a meta-daemon other than inetd, you are on
-your own)\&. Note that the first item in this line matches the service
-name in \f(CW/etc/services\fP\&. Substitute appropriate values for your system
-in this line (see \fBinetd (8)\fP):
-.PP
-\f(CWnetbios-ssn stream tcp nowait root /usr/local/samba/bin/smbd -d1 -l/var/adm/smblogs/log -s/usr/local/samba/lib/smb\&.conf\fP
-.PP
-(The above should appear in \f(CW/etc/inetd\&.conf\fP as a single
-line\&. Depending on your terminal characteristics, it may not appear
-that way in this man page\&. If the above appears as more than one
-line, please treat any newlines or indentation as a single space or
-TAB character\&.)
-.PP
-Note that there is no need to specify a port number here, even if you
-are using a non-standard port number\&.
-.PP
-Lastly, edit the configuration file to provide suitable services\&. To
-start with, the following two services should be all you need:
-.PP
+.SH SYNOPSIS
+.sp
+\fBsmbd\fR [ \fB-D\fR ] [ \fB-a\fR ] [ \fB-o\fR ] [ \fB-P\fR ] [ \fB-h\fR ] [ \fB-V\fR ] [ \fB-d <debug level>\fR ] [ \fB-l <log file>\fR ] [ \fB-p <port number>\fR ] [ \fB-O <socket option>\fR ] [ \fB-s <configuration file>\fR ]
+.SH "DESCRIPTION"
+.PP
+This program is part of the Samba suite.
+.PP
+\fBsmbd\fR is the server daemon that
+provides filesharing and printing services to Windows clients.
+The server provides filespace and printer services to
+clients using the SMB (or CIFS) protocol. This is compatible
+with the LanManager protocol, and can service LanManager
+clients. These include MSCLIENT 3.0 for DOS, Windows for
+Workgroups, Windows 95/98/ME, Windows NT, Windows 2000,
+OS/2, DAVE for Macintosh, and smbfs for Linux.
+.PP
+An extensive description of the services that the
+server can provide is given in the man page for the
+configuration file controlling the attributes of those
+services (see \fIsmb.conf(5)
+\fR <URL:smb.conf.5.html>. This man page will not describe the
+services, but will concentrate on the administrative aspects
+of running the server.
+.PP
+Please note that there are significant security
+implications to running this server, and the \fIsmb.conf(5)\fR <URL:smb.conf.5.html>
+manpage should be regarded as mandatory reading before
+proceeding with installation.
+.PP
+A session is created whenever a client requests one.
+Each client gets a copy of the server for each session. This
+copy then services all connections made by the client during
+that session. When all connections from its client are closed,
+the copy of the server for that client terminates.
+.PP
+The configuration file, and any files that it includes,
+are automatically reloaded every minute, if they change. You
+can force a reload by sending a SIGHUP to the server. Reloading
+the configuration file will not affect connections to any service
+that is already established. Either the user will have to
+disconnect from the service, or smbd killed and restarted.
+.SH "OPTIONS"
+.TP
+\fB-D\fR
+If specified, this parameter causes
+the server to operate as a daemon. That is, it detaches
+itself and runs in the background, fielding requests
+on the appropriate port. Operating the server as a
+daemon is the recommended way of running smbd for
+servers that provide more than casual use file and
+print services. This switch is assumed is \fBsmbd
+\fRis executed on the command line of a shell.
+.TP
+\fB-a\fR
+If this parameter is specified, each new
+connection will append log messages to the log file.
+This is the default.
+.TP
+\fB-o\fR
+If this parameter is specified, the
+log files will be overwritten when opened. By default,
+\fBsmbd\fR will append entries to the log
+files.
+.TP
+\fB-P\fR
+Passive option. Causes smbd not to
+send any network traffic out. Used for debugging by
+the developers only.
+.TP
+\fB-h\fR
+Prints the help information (usage)
+for \fBsmbd\fR.
+.TP
+\fB-v\fR
+Prints the version number for
+\fBsmbd\fR.
+.TP
+\fB-d <debug level>\fR
+debuglevel is an integer
+from 0 to 10. The default value if this parameter is
+not specified is zero.
+
+The higher this value, the more detail will be
+logged to the log files about the activities of the
+server. At level 0, only critical errors and serious
+warnings will be logged. Level 1 is a reasonable level for
+day to day running - it generates a small amount of
+information about operations carried out.
-.nf
-
+Levels above 1 will generate considerable
+amounts of log data, and should only be used when
+investigating a problem. Levels above 3 are designed for
+use only by developers and generate HUGE amounts of log
+data, most of which is extremely cryptic.
+Note that specifying this parameter here will
+override the log
+level <URL:smb.conf.5.html#loglevel> parameter in the \fIsmb.conf(5)\fR <URL:smb.conf.5.html> file.
+.TP
+\fB-l <log file>\fR
+If specified, \fBlog file\fR
+specifies a log filename into which informational and debug
+messages from the running server will be logged. The log
+file generated is never removed by the server although
+its size may be controlled by the max log size <URL:smb.conf.5.html#maxlogsize>
+option in the \fI smb.conf(5)\fR <URL:smb.conf.5.html> file. The default log
+file name is specified at compile time.
+.TP
+\fB-O <socket options>\fR
+See the socket options <URL:smb.conf.5.html#socketoptions>
+parameter in the \fIsmb.conf(5)
+\fR <URL:smb.conf.5.html> file for details.
+.TP
+\fB-p <port number>\fR
+port number is a positive integer
+value. The default value if this parameter is not
+specified is 139.
-[homes]
- writeable = yes
+This number is the port number that will be
+used when making connections to the server from client
+software. The standard (well-known) port number for the
+SMB over TCP is 139, hence the default. If you wish to
+run the server as an ordinary user rather than
+as root, most systems will require you to use a port
+number greater than 1024 - ask your system administrator
+for help if you are in this situation.
-[printers]
- writeable = no
- printable = yes
- path = /tmp
- public = yes
+In order for the server to be useful by most
+clients, should you configure it on a port other
+than 139, you will require port redirection services
+on port 139, details of which are outlined in rfc1002.txt
+section 4.3.5.
+This parameter is not normally specified except
+in the above situation.
+.TP
+\fB-s <configuration file>\fR
+The file specified contains the
+configuration details required by the server. The
+information in this file includes server-specific
+information such as what printcap file to use, as well
+as descriptions of all the services that the server is
+to provide. See \fI smb.conf(5)\fR <URL:smb.conf.5.html> for more information.
+The default configuration file name is determined at
+compile time.
+.SH "FILES"
+.TP
+\fB\fI/etc/inetd.conf\fB\fR
+If the server is to be run by the
+\fBinetd\fR meta-daemon, this file
+must contain suitable startup information for the
+meta-daemon. See the section INSTALLATION below.
+.TP
+\fB\fI/etc/rc\fB\fR
+or whatever initialization script your
+system uses).
-.fi
-
+If running the server as a daemon at startup,
+this file will need to contain an appropriate startup
+sequence for the server. See the section INSTALLATION
+below.
+.TP
+\fB\fI/etc/services\fB\fR
+If running the server via the
+meta-daemon \fBinetd\fR, this file
+must contain a mapping of service name (e.g., netbios-ssn)
+to service port (e.g., 139) and protocol type (e.g., tcp).
+See the section INSTALLATION below.
+.TP
+\fB\fI/usr/local/samba/lib/smb.conf\fB\fR
+This is the default location of the
+\fIsmb.conf\fR <URL:smb.conf.5.html>
+server configuration file. Other common places that systems
+install this file are \fI/usr/samba/lib/smb.conf\fR
+and \fI/etc/smb.conf\fR.
+
+This file describes all the services the server
+is to make available to clients. See \fIsmb.conf(5)\fR <URL:smb.conf.5.html> for more information.
+.SH "LIMITATIONS"
+.PP
+On some systems \fBsmbd\fR cannot change uid back
+to root after a setuid() call. Such systems are called
+|[[quot ]]|trapdoor|[[quot ]]| uid systems. If you have such a system,
+you will be unable to connect from a client (such as a PC) as
+two different users at once. Attempts to connect the
+second user will result in |[[quot ]]|access denied|[[quot ]]| or
+similar.
+.SH "ENVIRONMENTVARIABLES"
+.TP
+\fBPRINTER\fR
+If no printer name is specified to
+printable services, most systems will use the value of
+this variable (or |[[quot ]]|lp|[[quot ]]| if this variable is
+not defined) as the name of the printer to use. This
+is not specific to the server, however.
+.SH "INSTALLATION"
+.PP
+The location of the server and its support files
+is a matter for individual system administrators. The following
+are thus suggestions only.
+.PP
+It is recommended that the server software be installed
+under the \fI/usr/local/samba/\fR hierarchy,
+in a directory readable by all, writeable only by root. The server
+program itself should be executable by all, as users may wish to
+run the server themselves (in which case it will of course run
+with their privileges). The server should NOT be setuid. On some
+systems it may be worthwhile to make smbd setgid to an empty group.
+This is because some systems may have a security hole where daemon
+processes that become a user can be attached to with a debugger.
+Making the smbd file setgid to an empty group may prevent
+this hole from being exploited. This security hole and the suggested
+fix has only been confirmed on old versions (pre-kernel 2.0) of Linux
+at the time this was written. It is possible that this hole only
+exists in Linux, as testing on other systems has thus far shown them
+to be immune.
+.PP
+The server log files should be put in a directory readable and
+writeable only by root, as the log files may contain sensitive
+information.
+.PP
+The configuration file should be placed in a directory
+readable and writeable only by root, as the configuration file
+controls security for the services offered by the server. The
+configuration file can be made readable by all if desired, but
+this is not necessary for correct operation of the server and is
+not recommended. A sample configuration file \fIsmb.conf.sample
+\fRis supplied with the source to the server - this may
+be renamed to \fIsmb.conf\fR and modified to suit
+your needs.
+.PP
+The remaining notes will assume the following:
+.TP 0.2i
+\(bu
+\fBsmbd\fR (the server program)
+installed in \fI/usr/local/samba/bin\fR
+.TP 0.2i
+\(bu
+\fIsmb.conf\fR (the configuration
+file) installed in \fI/usr/local/samba/lib\fR
+.TP 0.2i
+\(bu
+log files stored in \fI/var/adm/smblogs
+\fR.PP
+The server may be run either as a daemon by users
+or at startup, or it may be run from a meta-daemon such as
+\fBinetd\fR upon request. If run as a daemon,
+the server will always be ready, so starting sessions will be
+faster. If run from a meta-daemon some memory will be saved and
+utilities such as the tcpd TCP-wrapper may be used for extra
+security. For serious use as file server it is recommended
+that \fBsmbd\fR be run as a daemon.
+.PP
+.PP
+When you've decided, continue with either
+.PP
+.TP 0.2i
+\(bu
+RUNNING THE SERVER AS A DAEMON or
+.TP 0.2i
+\(bu
+RUNNING THE SERVER ON REQUEST.
+.SH "RUNNING THE SERVER AS A DAEMON"
+.PP
+To run the server as a daemon from the command
+line, simply put the \fB-D\fR option on the
+command line. There is no need to place an ampersand at
+the end of the command line - the \fB-D\fR
+option causes the server to detach itself from the tty
+anyway.
+.PP
+Any user can run the server as a daemon (execute
+permissions permitting, of course). This is useful for
+testing purposes, and may even be useful as a temporary
+substitute for something like ftp. When run this way, however,
+the server will only have the privileges of the user who ran
+it.
+.PP
+To ensure that the server is run as a daemon whenever
+the machine is started, and to ensure that it runs as root
+so that it can serve multiple clients, you will need to modify
+the system startup files. Wherever appropriate (for example, in
+\fI/etc/rc\fR), insert the following line,
+substituting port number, log file location, configuration file
+location and debug level as desired:
+.PP
+\fB/usr/local/samba/bin/smbd -D -l /var/adm/smblogs/log
+-s /usr/local/samba/lib/smb.conf\fR
+.PP
+(The above should appear in your initialization script
+as a single line. Depending on your terminal characteristics,
+it may not appear that way in this man page. If the above appears
+as more than one line, please treat any newlines or indentation
+as a single space or TAB character.)
+.PP
+If the options used at compile time are appropriate for
+your system, all parameters except \fB-D\fR may
+be omitted. See the section OPTIONS above.
+.SH "RUNNING THE SERVER ON REQUEST"
+.PP
+If your system uses a meta-daemon such as \fBinetd
+\fR, you can arrange to have the smbd server started
+whenever a process attempts to connect to it. This requires several
+changes to the startup files on the host machine. If you are
+experimenting as an ordinary user rather than as root, you will
+need the assistance of your system administrator to modify the
+system files.
+.PP
+You will probably want to set up the NetBIOS name server
+\fBnmbd\fR <URL:nmbd.8.html> at
+the same time as \fBsmbd\fR. To do this refer to the
+man page for \fBnmbd(8)\fR
+ <URL:nmbd.8.html>.
+.PP
+First, ensure that a port is configured in the file
+\fI/etc/services\fR. The well-known port 139
+should be used if possible, though any port may be used.
+.PP
+Ensure that a line similar to the following is in
+\fI/etc/services\fR:
+.PP
+\fBnetbios-ssn 139/tcp\fR
+.PP
+Note for NIS/YP users - you may need to rebuild the
+NIS service maps rather than alter your local \fI/etc/services
+\fRfile.
+.PP
+Next, put a suitable line in the file \fI/etc/inetd.conf
+\fR(in the unlikely event that you are using a meta-daemon
+other than inetd, you are on your own). Note that the first item
+in this line matches the service name in \fI/etc/services
+\fR\&. Substitute appropriate values for your system
+in this line (see \fBinetd(8)\fR):
+.PP
+\fBnetbios-ssn stream tcp nowait root /usr/local/samba/bin/smbd
+-d1 -l/var/adm/smblogs/log -s/usr/local/samba/lib/smb.conf\fR
+.PP
+(The above should appear in \fI/etc/inetd.conf\fR
+as a single line. Depending on your terminal characteristics, it may
+not appear that way in this man page. If the above appears as more
+than one line, please treat any newlines or indentation as a single
+space or TAB character.)
+.PP
+Note that there is no need to specify a port number here,
+even if you are using a non-standard port number.
+.PP
+Lastly, edit the configuration file to provide suitable
+services. To start with, the following two services should be
+all you need:
+.sp
+.nf
+ [homes]
+ writeable = yes
-.PP
-This will allow you to connect to your home directory and print to any
-printer supported by the host (user privileges permitting)\&.
-.PP
-.SH "TESTING THE INSTALLATION"
-.PP
-If running the server as a daemon, execute it before proceeding\&. If
-using a meta-daemon, either restart the system or kill and restart the
-meta-daemon\&. Some versions of inetd will reread their configuration
-tables if they receive a HUP signal\&.
-.PP
-If your machine\'s name is "fred" and your name is "mary", you should
-now be able to connect to the service \f(CW\e\efred\emary\fP\&.
-.PP
-To properly test and experiment with the server, we recommend using
-the smbclient program (see
-\fBsmbclient (1)\fP) and also going through
-the steps outlined in the file \fIDIAGNOSIS\&.txt\fP in the \fIdocs/\fP
-directory of your Samba installation\&.
-.PP
-.SH "VERSION"
-.PP
-This man page is correct for version 2\&.0 of the Samba suite\&.
-.PP
-.SH "DIAGNOSTICS"
-.PP
-Most diagnostics issued by the server are logged in a specified log
-file\&. The log file name is specified at compile time, but may be
-overridden on the command line\&.
-.PP
-The number and nature of diagnostics available depends on the debug
-level used by the server\&. If you have problems, set the debug level to
-3 and peruse the log files\&.
-.PP
-Most messages are reasonably self-explanatory\&. Unfortunately, at the time
-this man page was created, there are too many diagnostics available
-in the source code to warrant describing each and every diagnostic\&. At
-this stage your best bet is still to grep the source code and inspect
-the conditions that gave rise to the diagnostics you are seeing\&.
-.PP
-.SH "SIGNALS"
-.PP
-Sending the smbd a SIGHUP will cause it to re-load its smb\&.conf
-configuration file within a short period of time\&.
-.PP
-To shut down a users smbd process it is recommended that SIGKILL (-9)
-\fINOT\fP be used, except as a last resort, as this may leave the shared
-memory area in an inconsistent state\&. The safe way to terminate an
-smbd is to send it a SIGTERM (-15) signal and wait for it to die on
-its own\&.
-.PP
-The debug log level of smbd may be raised
-by sending it a SIGUSR1 \f(CW(kill -USR1 <smbd-pid>)\fP and lowered by
-sending it a SIGUSR2 \f(CW(kill -USR2 <smbd-pid>)\fP\&. This is to allow
-transient problems to be diagnosed, whilst still running at a normally
-low log level\&.
-.PP
-Note that as the signal handlers send a debug write, they are not
-re-entrant in smbd\&. This you should wait until smbd is in a state of
-waiting for an incoming smb before issuing them\&. It is possible to
-make the signal handlers safe by un-blocking the signals before the
-select call and re-blocking them after, however this would affect
-performance\&.
-.PP
-.SH "SEE ALSO"
-.PP
-\fBhosts_access (5)\fP, \fBinetd (8)\fP, \fBnmbd (8)\fP,
-\fBsmb\&.conf (5)\fP, \fBsmbclient
-(1)\fP, \fBtestparm (1)\fP,
-\fBtestprns (1)\fP, and the Internet RFC\'s
-\fBrfc1001\&.txt\fP, \fBrfc1002\&.txt\fP\&. In addition the CIFS (formerly SMB)
-specification is available as a link from the Web page :
-http://samba\&.org/cifs/\&.
-.PP
-.SH "AUTHOR"
-.PP
-The original Samba software and related utilities were created by
-Andrew Tridgell samba@samba\&.org\&. Samba is now developed
-by the Samba Team as an Open Source project similar to the way the
-Linux kernel is developed\&.
-.PP
-The original Samba man pages were written by Karl Auer\&. The man page
-sources were converted to YODL format (another excellent piece of Open
-Source software, available at
-\fBftp://ftp\&.icce\&.rug\&.nl/pub/unix/\fP)
-and updated for the Samba2\&.0 release by Jeremy Allison\&.
-samba@samba\&.org\&.
-.PP
-See \fBsamba (7)\fP to find out how to get a full list of contributors
-and details on how to submit bug reports, comments etc\&.
+ [printers]
+ writeable = no
+ printable = yes
+ path = /tmp
+ public = yes
+
+
+.sp
+.fi
+.PP
+This will allow you to connect to your home directory
+and print to any printer supported by the host (user privileges
+permitting).
+.SH "TESTING THE INSTALLATION"
+.PP
+If running the server as a daemon, execute it before
+proceeding. If using a meta-daemon, either restart the system
+or kill and restart the meta-daemon. Some versions of
+\fBinetd\fR will reread their configuration
+tables if they receive a HUP signal.
+.PP
+If your machine's name is |[[quot ]]|fred|[[quot ]]| and your
+name is |[[quot ]]|mary|[[quot ]]|, you should now be able to connect
+to the service \fI|[[bsol ]]||[[bsol ]]|fred|[[bsol ]]|mary\fR.
+.PP
+To properly test and experiment with the server, we
+recommend using the \fBsmbclient\fR program (see
+\fBsmbclient(1)\fR <URL:smbclient.1.html>)
+and also going through the steps outlined in the file
+\fIDIAGNOSIS.txt\fR in the \fIdocs/\fR
+directory of your Samba installation.
+.SH "VERSION"
+.PP
+This man page is correct for version 2.2 of
+the Samba suite.
+.SH "DIAGNOSTICS"
+.PP
+Most diagnostics issued by the server are logged
+in a specified log file. The log file name is specified
+at compile time, but may be overridden on the command line.
+.PP
+The number and nature of diagnostics available depends
+on the debug level used by the server. If you have problems, set
+the debug level to 3 and peruse the log files.
+.PP
+Most messages are reasonably self-explanatory. Unfortunately,
+at the time this man page was created, there are too many diagnostics
+available in the source code to warrant describing each and every
+diagnostic. At this stage your best bet is still to grep the
+source code and inspect the conditions that gave rise to the
+diagnostics you are seeing.
+.SH "SIGNALS"
+.PP
+Sending the smbd a SIGHUP will cause it to
+re-load its \fIsmb.conf\fR configuration
+file within a short period of time.
+.PP
+To shut down a users smbd process it is recommended
+that \fBSIGKILL (-9)\fR \fBNOT\fR
+be used, except as a last resort, as this may leave the shared
+memory area in an inconsistent state. The safe way to terminate
+an smbd is to send it a SIGTERM (-15) signal and wait for
+it to die on its own.
+.PP
+The debug log level of smbd may be raised by sending
+it a SIGUSR1 (\fBkill -USR1 <smbd-pid>\fR)
+and lowered by sending it a SIGUSR2 (\fBkill -USR2 <smbd-pid>
+\fR). This is to allow transient problems to be diagnosed,
+whilst still running at a normally low log level.
+.PP
+Note that as the signal handlers send a debug write,
+they are not re-entrant in smbd. This you should wait until
+smbd is in a state of waiting for an incoming smb before
+issuing them. It is possible to make the signal handlers safe
+by un-blocking the signals before the select call and re-blocking
+them after, however this would affect performance.
+.SH "SEE ALSO"
+.PP
+hosts_access(5), \fBinetd(8)\fR,
+\fBnmbd(8)\fR <URL:nmbd.8.html>,
+\fIsmb.conf(5)\fR
+ <URL:smb.conf.5.html>, \fBsmbclient(1)
+\fR <URL:smbclient.1.html>, \fB testparm(1)\fR <URL:testparm.1.html>, \fBtestprns(1)\fR <URL:testprns.1.html>, and the Internet RFC's
+\fIrfc1001.txt\fR, \fIrfc1002.txt\fR.
+In addition the CIFS (formerly SMB) specification is available
+as a link from the Web page
+http://samba.org/cifs/ <URL:http://samba.org/cifs/>.
+.SH "AUTHOR"
+.PP
+The original Samba software and related utilities
+were created by Andrew Tridgell. Samba is now developed
+by the Samba Team as an Open Source project similar
+to the way the Linux kernel is developed.
+.PP
+The original Samba man pages were written by Karl Auer.
+The man page sources were converted to YODL format (another
+excellent piece of Open Source software, available at
+ftp://ftp.icce.rug.nl/pub/unix/ <URL:ftp://ftp.icce.rug.nl/pub/unix/>) and updated for the Samba 2.0
+release by Jeremy Allison. The conversion to DocBook for
+Samba 2.2 was done by Gerald Carter