Add all the source files from the old CVS tree,

add the 5 missing chapters from the HOWTO
and add jht's Samba by Example book.
(This used to be commit 9fb5bcb93e57c5162b3ee6f9c7d777dc0269d100)

13 files changed, 314 insertions, 0 deletions

diff --git a/docs/smbdotconf/base/bindinterfacesonly.xml b/docs/smbdotconf/base/bindinterfacesonly.xml
new file mode 100644
index 0000000000..d124159657
--- /dev/null
+++ b/docs/smbdotconf/base/bindinterfacesonly.xml
@@ -0,0 +1,71 @@
+<samba:parameter name="bind interfaces only"
+				type="boolean"
+                 context="G"
+                 advanced="1" wizard="1" developer="1"
+                 xmlns:samba="http://samba.org/common">
+<description>
+        <para>This global parameter allows the Samba admin 
+        to limit what interfaces on a machine will serve SMB requests. It 
+        affects file service <citerefentry><refentrytitle>smbd</refentrytitle>
+        <manvolnum>8</manvolnum></citerefentry> and name service <citerefentry><refentrytitle>nmbd</refentrytitle>
+        <manvolnum>8</manvolnum></citerefentry> in a slightly different ways.</para>
+
+	<para>For name service it causes <command moreinfo="none">nmbd</command> to bind 
+	to ports 137 and 138 on the interfaces listed in 
+        the <link linkend="INTERFACES">interfaces</link> parameter. <command moreinfo="none">nmbd</command> also 
+        binds to the &quot;all addresses&quot; interface (0.0.0.0) 
+	on ports 137 and 138 for the purposes of reading broadcast messages. 
+	If this option is not set then <command moreinfo="none">nmbd</command> will service 
+	name requests on all of these sockets. If <parameter moreinfo="none">bind interfaces
+	only</parameter> is set then <command moreinfo="none">nmbd</command> will check the 
+	source address of any packets coming in on the broadcast sockets 
+	and discard any that don't match the broadcast addresses of the 
+	interfaces in the <parameter moreinfo="none">interfaces</parameter> parameter list. 
+	As unicast packets are received on the other sockets it allows 
+	<command moreinfo="none">nmbd</command> to refuse to serve names to machines that 
+	send packets that arrive through any interfaces not listed in the
+	<parameter moreinfo="none">interfaces</parameter> list.  IP Source address spoofing
+	does defeat this simple check, however, so it must not be used
+	seriously as a security feature for <command moreinfo="none">nmbd</command>.</para>
+
+	<para>For file service it causes <citerefentry><refentrytitle>smbd</refentrytitle>
+	<manvolnum>8</manvolnum></citerefentry> to bind only to the interface list 
+	given in the <link linkend="INTERFACES">interfaces</link> parameter. This 
+        restricts the networks that <command moreinfo="none">smbd</command> will serve 
+        to packets coming in those interfaces.  Note that you should not use this parameter 
+        for machines that are serving PPP or other intermittent or non-broadcast network 
+	interfaces as it will not cope with non-permanent interfaces.</para>
+
+	<para>If <parameter moreinfo="none">bind interfaces only</parameter> is set then 
+	unless the network address <emphasis>127.0.0.1</emphasis> is added 
+	to the <parameter moreinfo="none">interfaces</parameter> parameter 
+        list <citerefentry><refentrytitle>smbpasswd</refentrytitle>
+	<manvolnum>8</manvolnum></citerefentry> and <citerefentry><refentrytitle>swat</refentrytitle>
+	<manvolnum>8</manvolnum></citerefentry> may not work as expected due 
+        to the reasons covered below.</para>
+
+	<para>To change a users SMB password, the <command moreinfo="none">smbpasswd</command>
+	by default connects to the <emphasis>localhost - 127.0.0.1</emphasis> 
+	address as an SMB client to issue the password change request. If 
+	<parameter moreinfo="none">bind interfaces only</parameter> is set then unless the 
+	network address <emphasis>127.0.0.1</emphasis> is added to the
+	<parameter moreinfo="none">interfaces</parameter> parameter list then <command moreinfo="none">
+	smbpasswd</command> will fail to connect in it's default mode. 
+	<command moreinfo="none">smbpasswd</command> can be forced to use the primary IP interface 
+	of the local host by using its <citerefentry><refentrytitle>smbpasswd</refentrytitle>
+	<manvolnum>8</manvolnum></citerefentry>	<parameter moreinfo="none">-r <replaceable>remote machine</replaceable></parameter>
+	parameter, with <replaceable>remote machine</replaceable> set 
+	to the IP name of the primary interface of the local host.</para>
+
+	<para>The <command moreinfo="none">swat</command> status page tries to connect with
+	<command moreinfo="none">smbd</command> and <command moreinfo="none">nmbd</command> at the address 
+	<emphasis>127.0.0.1</emphasis> to determine if they are running.  
+	Not adding <emphasis>127.0.0.1</emphasis>  will cause <command moreinfo="none">
+	smbd</command> and <command moreinfo="none">nmbd</command> to always show
+	&quot;not running&quot; even if they really are.  This can prevent <command moreinfo="none">
+	swat</command> from starting/stopping/restarting <command moreinfo="none">smbd</command>
+	and <command moreinfo="none">nmbd</command>.</para>
+
+</description>
+<value type="default">no</value>
+</samba:parameter>
diff --git a/docs/smbdotconf/base/comment.xml b/docs/smbdotconf/base/comment.xml
new file mode 100644
index 0000000000..8633811fa4
--- /dev/null
+++ b/docs/smbdotconf/base/comment.xml
@@ -0,0 +1,19 @@
+<samba:parameter name="comment"
+                 context="S"
+				 type="string"
+                 basic="1" advanced="1" share="1" print="1" developer="1" 
+                 xmlns:samba="http://samba.org/common">
+<description>
+    <para>This is a text field that is seen next to a share 
+	when a client does a queries the server, either via the network 
+	neighborhood or via <command moreinfo="none">net view</command> to list what shares 
+	are available.</para>
+
+	<para>If you want to set the string that is displayed next to the 
+	machine name then see the <link linkend="SERVERSTRING"><parameter moreinfo="none">
+	server string</parameter></link> parameter.</para>
+
+</description>
+<value type="default"><comment>No comment</comment></value>
+<value type="example">Fred's Files</value>
+</samba:parameter>
diff --git a/docs/smbdotconf/base/displaycharset.xml b/docs/smbdotconf/base/displaycharset.xml
new file mode 100644
index 0000000000..1d059821f1
--- /dev/null
+++ b/docs/smbdotconf/base/displaycharset.xml
@@ -0,0 +1,15 @@
+<samba:parameter name="display charset"
+				 type="string"
+                 context="G"
+                 advanced="1" developer="1"
+                 xmlns:samba="http://samba.org/common">
+<description>
+        <para>Specifies the charset that samba will use 
+	to print messages to stdout and stderr and SWAT will use. 
+	Should generally be the same as the <command moreinfo="none">unix charset</command>.
+</para>
+</description>
+
+<value type="default">ASCII</value>
+<value type="example">UTF8</value>
+</samba:parameter>
diff --git a/docs/smbdotconf/base/doscharset.xml b/docs/smbdotconf/base/doscharset.xml
new file mode 100644
index 0000000000..e360e4f671
--- /dev/null
+++ b/docs/smbdotconf/base/doscharset.xml
@@ -0,0 +1,17 @@
+<samba:parameter name="dos charset"
+				 type="string"
+                 context="G"
+                 advanced="1" developer="1"
+				 xmlns:samba="http://samba.org/common">
+<description>
+        <para>DOS SMB clients assume the server has 
+	the same charset as they do. This option specifies which 
+	charset Samba should talk to DOS clients.
+	</para>
+
+	<para>The default depends on which charsets you have installed. 
+	Samba tries to use charset 850 but falls back to ASCII in 
+	case it is not available. Run <citerefentry><refentrytitle>testparm</refentrytitle>
+	<manvolnum>1</manvolnum></citerefentry> to check the default on your system.</para>
+</description>
+</samba:parameter>
diff --git a/docs/smbdotconf/base/interfaces.xml b/docs/smbdotconf/base/interfaces.xml
new file mode 100644
index 0000000000..e6d9d6c3ec
--- /dev/null
+++ b/docs/smbdotconf/base/interfaces.xml
@@ -0,0 +1,49 @@
+<samba:parameter name="interfaces"
+                 context="G"
+				 type="list"
+                 basic="1" advanced="1" wizard="1" developer="1"
+                 xmlns:samba="http://samba.org/common">
+<description>
+        <para>This option allows you to override the default 
+	network interfaces list that Samba will use for browsing, name 
+	registration and other NBT traffic. By default Samba will query 
+	the kernel for the list of all active interfaces and use any 
+	interfaces except 127.0.0.1 that are broadcast capable.</para>
+
+	<para>The option takes a list of interface strings. Each string 
+	can be in any of the following forms:</para>
+
+	<itemizedlist>
+		<listitem><para>a network interface name (such as eth0). 
+		This may include shell-like wildcards so eth* will match 
+		any interface starting with the substring &quot;eth&quot;</para></listitem>
+			
+		<listitem><para>an IP address. In this case the netmask is 
+		determined from the list of interfaces obtained from the 
+		kernel</para></listitem>
+			
+		<listitem><para>an IP/mask pair. </para></listitem>
+			
+		<listitem><para>a broadcast/mask pair.</para></listitem>
+	</itemizedlist>
+
+	<para>The &quot;mask&quot; parameters can either be a bit length (such 
+	as 24 for a C class network) or a full netmask in dotted 
+	decimal form.</para>
+
+	<para>The &quot;IP&quot; parameters above can either be a full dotted 
+	decimal IP address or a hostname which will be looked up via 
+	the OS's normal hostname resolution mechanisms.</para>
+
+</description>
+
+<value type="example">
+	<comment>This would configure three network interfaces corresponding 
+	to the eth0 device and IP addresses 192.168.2.10 and 192.168.3.10. 
+	The netmasks of the latter two interfaces would be set to 255.255.255.0.</comment>
+	eth0 192.168.2.10/24 192.168.3.10/255.255.255.0
+</value>
+
+<related>bind interfaces only</related>
+<value type="default"><comment>all active interfaces except 127.0.0.1 that are broadcast capable</comment></value>
+</samba:parameter>
diff --git a/docs/smbdotconf/base/netbiosaliases.xml b/docs/smbdotconf/base/netbiosaliases.xml
new file mode 100644
index 0000000000..92341f2510
--- /dev/null
+++ b/docs/smbdotconf/base/netbiosaliases.xml
@@ -0,0 +1,17 @@
+<samba:parameter name="netbios aliases"
+                 context="G"
+				 type="list"
+                 advanced="1" wizard="1" developer="1"
+                 xmlns:samba="http://samba.org/common">
+ <description>
+        <para>This is a list of NetBIOS names that nmbd will 
+        advertise as additional names by which the Samba server is known. This allows one machine 
+	to appear in browse lists under multiple names. If a machine is acting as a browse server 
+        or logon server none of these names will be advertised as either browse server or logon 
+	servers, only the primary name of the machine will be advertised with these capabilities.
+        </para>
+</description>
+<related>netbios name</related>
+<value type="default"><comment>empty string (no additional names)</comment></value>
+<value type="example">TEST TEST1 TEST2</value>
+</samba:parameter>
diff --git a/docs/smbdotconf/base/netbiosname.xml b/docs/smbdotconf/base/netbiosname.xml
new file mode 100644
index 0000000000..48685066c9
--- /dev/null
+++ b/docs/smbdotconf/base/netbiosname.xml
@@ -0,0 +1,17 @@
+<samba:parameter name="netbios name"
+                 context="G"
+                 basic="1" advanced="1" wizard="1" developer="1"
+                 xmlns:samba="http://samba.org/common">
+<description>
+        <para>This sets the NetBIOS name by which a Samba 
+	server is known. By default it is the same as the first component 
+	of the host's DNS name. If a machine is a browse server or
+	logon server this name (or the first component
+	of the hosts DNS name) will be the name that these services are
+	advertised under.</para>
+</description>
+
+<related>netbios aliases</related>
+<value type="default"><comment>machine DNS name</comment></value>
+<value type="example">MYNAME</value>
+</samba:parameter>
diff --git a/docs/smbdotconf/base/netbiosscope.xml b/docs/smbdotconf/base/netbiosscope.xml
new file mode 100644
index 0000000000..eee80f7cd5
--- /dev/null
+++ b/docs/smbdotconf/base/netbiosscope.xml
@@ -0,0 +1,12 @@
+<samba:parameter name="netbios scope"
+                 context="G"
+				 type="string"
+                 advanced="1" developer="1"
+                 xmlns:samba="http://samba.org/common">
+<description>
+        <para>This sets the NetBIOS scope that Samba will 
+	operate under. This should not be set unless every machine 
+	on your LAN also sets this value.</para>
+</description>
+<value type="default"></value>
+</samba:parameter>
diff --git a/docs/smbdotconf/base/path.xml b/docs/smbdotconf/base/path.xml
new file mode 100644
index 0000000000..ca99405878
--- /dev/null
+++ b/docs/smbdotconf/base/path.xml
@@ -0,0 +1,31 @@
+<samba:parameter name="path"
+                 context="S"
+                 basic="1" advanced="1" share="1" print="1" developer="1"
+                 xmlns:samba="http://samba.org/common">
+<synonym>directory</synonym>
+<description>
+        <para>This parameter specifies a directory to which 
+	the user of the service is to be given access. In the case of 
+	printable services, this is where print data will spool prior to 
+	being submitted to the host for printing.</para>
+
+	<para>For a printable service offering guest access, the service 
+	should be readonly and the path should be world-writeable and 
+	have the sticky bit set. This is not mandatory of course, but 
+	you probably won't get the results you expect if you do 
+	otherwise.</para>
+
+	<para>Any occurrences of <parameter moreinfo="none">%u</parameter> in the path 
+	will be replaced with the UNIX username that the client is using 
+	on this connection. Any occurrences of <parameter moreinfo="none">%m</parameter> 
+	will be replaced by the NetBIOS name of the machine they are 
+	connecting from. These replacements are very useful for setting 
+	up pseudo home directories for users.</para>
+
+	<para>Note that this path will be based on <link linkend="ROOTDIR">
+	<parameter moreinfo="none">root dir</parameter></link> if one was specified.</para>
+	</description>
+
+	<value type="default"></value>
+	<value type="example">/home/fred</value>
+</samba:parameter>
diff --git a/docs/smbdotconf/base/realm.xml b/docs/smbdotconf/base/realm.xml
new file mode 100644
index 0000000000..9610295dbf
--- /dev/null
+++ b/docs/smbdotconf/base/realm.xml
@@ -0,0 +1,15 @@
+<samba:parameter name="realm"
+                 context="G"
+				 type="string"
+                 basic="1" advanced="1" wizard="1" developer="1"
+                 xmlns:samba="http://samba.org/common">
+<description>
+        <para>This option specifies the kerberos realm to use. The realm is 
+	used as the ADS equivalent of the NT4 <command moreinfo="none">domain</command>. It
+	is usually set to the DNS name of the kerberos server.
+	</para>
+</description>
+		
+<value type="default"></value>
+<value type="example">mysambabox.mycompany.com</value>
+</samba:parameter>
diff --git a/docs/smbdotconf/base/serverstring.xml b/docs/smbdotconf/base/serverstring.xml
new file mode 100644
index 0000000000..9b121347ae
--- /dev/null
+++ b/docs/smbdotconf/base/serverstring.xml
@@ -0,0 +1,21 @@
+<samba:parameter name="server string"
+                 context="G"
+                 basic="1" advanced="1" developer="1"
+                 xmlns:samba="http://samba.org/common">
+<description>
+        <para>This controls what string will show up in the printer comment box in print 
+        manager and next to the IPC connection in <command moreinfo="none">net view</command>. It 
+        can be any string that you wish to show to your users.</para>
+		
+	<para>It also sets what will appear in browse lists next 
+	to the machine name.</para>
+
+	<para>A <parameter moreinfo="none">%v</parameter> will be replaced with the Samba 
+	version number.</para>
+
+	<para>A <parameter moreinfo="none">%h</parameter> will be replaced with the 
+		hostname.</para>
+</description>
+<value type="default">Samba %v</value>
+<value type="example">University of GNUs Samba Server</value>
+</samba:parameter>
diff --git a/docs/smbdotconf/base/unixcharset.xml b/docs/smbdotconf/base/unixcharset.xml
new file mode 100644
index 0000000000..143b6cb2a7
--- /dev/null
+++ b/docs/smbdotconf/base/unixcharset.xml
@@ -0,0 +1,15 @@
+<samba:parameter name="unix charset"
+	context="G"
+	type="string"
+                 advanced="1" developer="1"
+                 xmlns:samba="http://samba.org/common">
+<description>
+        <para>Specifies the charset the unix machine 
+	Samba runs on uses. Samba needs to know this in order to be able to 
+	convert text to the charsets other SMB clients use.
+</para>
+</description>
+
+<value type="default">UTF8</value>
+<value type="example">ASCII</value>
+</samba:parameter>
diff --git a/docs/smbdotconf/base/workgroup.xml b/docs/smbdotconf/base/workgroup.xml
new file mode 100644
index 0000000000..6ada22867f
--- /dev/null
+++ b/docs/smbdotconf/base/workgroup.xml
@@ -0,0 +1,15 @@
+<samba:parameter name="workgroup"
+                 context="G"
+				 type="string"
+                 basic="1" advanced="1" wizard="1" developer="1"
+                 xmlns:samba="http://samba.org/common">
+<description>
+        <para>This controls what workgroup your server will 
+	appear to be in when queried by clients. Note that this parameter 
+	also controls the Domain name used with 
+        the <link linkend="SECURITYEQUALSDOMAIN"><command moreinfo="none">security = domain</command></link>
+		setting.</para>
+</description>
+<value type="default">WORKGROUP</value>
+<value type="example">MYGROUP</value>
+</samba:parameter>