merge from 2.2

(This used to be commit 8b357e6551c3a91aa7017ae8dcf38558f15f1c0b)

3 files changed, 38 insertions, 1044 deletions

diff --git a/docs/docbook/manpages/smb.conf.5.sgml b/docs/docbook/manpages/smb.conf.5.sgml
index ac428f88d1..5779f72da5 100644
--- a/docs/docbook/manpages/smb.conf.5.sgml
+++ b/docs/docbook/manpages/smb.conf.5.sgml
@@ -1068,8 +1068,8 @@
 		<emphasis>ON DEMAND</emphasis> when a user accesses the Samba server.</para>
 
 		<para>In order to use this option, <ulink url="smbd.8.html">smbd</ulink> 
-		must be set to <parameter>security = server</parameter> or <parameter>
-		security = domain</parameter> and <parameter>add user script</parameter>
+		must <emphasis>NOT</emphasis> be set to <parameter>security = share</parameter>
+		and <parameter>add user script</parameter>
 		must be set to a full pathname for a script that will create a UNIX 
 		user given one argument of <parameter>%u</parameter>, which expands into 
 		the UNIX user name to create.</para>
@@ -1879,19 +1879,11 @@
 		Windows NT user no longer exists.</para>
 		
 		<para>In order to use this option, <command>smbd</command> must be 
-		set to <parameter>security = domain</parameter> and <parameter>delete 
-		user script</parameter> must be set to a full pathname for a script 
-		that will delete a UNIX user given one argument of <parameter>%u
-		</parameter>, which expands into the UNIX user name to delete.
-		<emphasis>NOTE</emphasis> that this is different to the <link
-		linkend="ADDUSERSCRIPT"><parameter>add user script</parameter></link>
-		which will work with the <parameter>security = server</parameter> option 
-		as well as <parameter>security = domain</parameter>. The reason for this
-		is only when Samba is a domain member does it get the information
-		on an attempted user logon that a user no longer exists. In the
-		<parameter>security = server</parameter> mode a missing user
-		is treated the same as an invalid password logon attempt. Deleting
-		the user in this circumstance would not be a good idea.</para>
+		set to <parameter>security = domain</parameter> or <parameter>security =
+		user</parameter> and <parameter>delete user script</parameter> 
+		must be set to a full pathname for a script 
+		that will delete a UNIX user given one argument of <parameter>%u</parameter>, 
+		which expands into the UNIX user name to delete.</para>
 
 		<para>When the Windows user attempts to access the Samba server, 
 		at <emphasis>login</emphasis> (session setup in the SMB protocol) 
diff --git a/docs/htmldocs/smb.conf.5.html b/docs/htmldocs/smb.conf.5.html
index 1438b1436b..f473afa2d2 100644
--- a/docs/htmldocs/smb.conf.5.html
+++ b/docs/htmldocs/smb.conf.5.html
@@ -1029,54 +1029,6 @@ CLASS="PARAMETER"
 ><LI
 ><P
 ><A
-HREF="#CHARACTERSET"
-><TT
-CLASS="PARAMETER"
-><I
->character set</I
-></TT
-></A
-></P
-></LI
-><LI
-><P
-><A
-HREF="#CLIENTCODEPAGE"
-><TT
-CLASS="PARAMETER"
-><I
->client code page</I
-></TT
-></A
-></P
-></LI
-><LI
-><P
-><A
-HREF="#CODEPAGEDIRECTORY"
-><TT
-CLASS="PARAMETER"
-><I
->code page directory</I
-></TT
-></A
-></P
-></LI
-><LI
-><P
-><A
-HREF="#CODINGSYSTEM"
-><TT
-CLASS="PARAMETER"
-><I
->coding system</I
-></TT
-></A
-></P
-></LI
-><LI
-><P
-><A
 HREF="#CONFIGFILE"
 ><TT
 CLASS="PARAMETER"
@@ -2877,18 +2829,6 @@ CLASS="PARAMETER"
 ><LI
 ><P
 ><A
-HREF="#VALIDCHARS"
-><TT
-CLASS="PARAMETER"
-><I
->valid chars</I
-></TT
-></A
-></P
-></LI
-><LI
-><P
-><A
 HREF="#WINBINDCACHETIME"
 ><TT
 CLASS="PARAMETER"
@@ -3047,7 +2987,7 @@ CLASS="PARAMETER"
 ><DIV
 CLASS="REFSECT1"
 ><A
-NAME="AEN986"
+NAME="AEN966"
 ></A
 ><H2
 >COMPLETE LIST OF SERVICE PARAMETERS</H2
@@ -4490,7 +4430,7 @@ CLASS="PARAMETER"
 ><DIV
 CLASS="REFSECT1"
 ><A
-NAME="AEN1466"
+NAME="AEN1446"
 ></A
 ><H2
 >EXPLANATION OF EACH PARAMETER</H2
@@ -4913,17 +4853,15 @@ HREF="smbd.8.html"
 TARGET="_top"
 >smbd</A
 > 
-		must be set to <TT
-CLASS="PARAMETER"
-><I
->security = server</I
-></TT
-> or <TT
+		must <EM
+>NOT</EM
+> be set to <TT
 CLASS="PARAMETER"
 ><I
->		security = domain</I
+>security = share</I
 ></TT
-> and <TT
+>
+		and <TT
 CLASS="PARAMETER"
 ><I
 >add user script</I
@@ -5757,504 +5695,6 @@ CLASS="COMMAND"
 ></DD
 ><DT
 ><A
-NAME="CHARACTERSET"
-></A
->character set (G)</DT
-><DD
-><P
->This allows <A
-HREF="smbd.8.html"
-TARGET="_top"
->smbd</A
-> to map incoming filenames 
-		from a DOS Code page (see the <A
-HREF="#CLIENTCODEPAGE"
->client 
-		code page</A
-> parameter) to several built in UNIX character sets. 
-		The built in code page translations are:</P
-><P
-></P
-><UL
-><LI
-><P
-><TT
-CLASS="CONSTANT"
->ISO8859-1</TT
-> : Western European 
-			UNIX character set. The parameter <TT
-CLASS="PARAMETER"
-><I
->client code page</I
-></TT
->
-			<EM
->MUST</EM
-> be set to code page 850 if the 
-			<TT
-CLASS="PARAMETER"
-><I
->character set</I
-></TT
-> parameter is set to
-			<TT
-CLASS="CONSTANT"
->ISO8859-1</TT
-> in order for the conversion to the 
-			UNIX character set to be done correctly.</P
-></LI
-><LI
-><P
-><TT
-CLASS="CONSTANT"
->ISO8859-2</TT
-> : Eastern European 
-			UNIX character set. The parameter <TT
-CLASS="PARAMETER"
-><I
->client code page
-			</I
-></TT
-> <EM
->MUST</EM
-> be set to code page 852 if 
-			the <TT
-CLASS="PARAMETER"
-><I
-> character set</I
-></TT
-> parameter is set 
-			to <TT
-CLASS="CONSTANT"
->ISO8859-2</TT
-> in order for the conversion 
-			to the UNIX character set to be done correctly. </P
-></LI
-><LI
-><P
-><TT
-CLASS="CONSTANT"
->ISO8859-5</TT
-> : Russian Cyrillic 
-			UNIX character set. The parameter <TT
-CLASS="PARAMETER"
-><I
->client code page
-			</I
-></TT
-> <EM
->MUST</EM
-> be set to code page 
-			866 if the <TT
-CLASS="PARAMETER"
-><I
->character set </I
-></TT
-> parameter is 
-			set to <TT
-CLASS="CONSTANT"
->ISO8859-5</TT
-> in order for the conversion 
-			to the UNIX character set to be done correctly. </P
-></LI
-><LI
-><P
-><TT
-CLASS="CONSTANT"
->ISO8859-7</TT
-> : Greek UNIX 
-			character set. The parameter <TT
-CLASS="PARAMETER"
-><I
->client code page
-			</I
-></TT
-> <EM
->MUST</EM
-> be set to code page 
-			737 if the <TT
-CLASS="PARAMETER"
-><I
->character set</I
-></TT
-> parameter is 
-			set to <TT
-CLASS="CONSTANT"
->ISO8859-7</TT
-> in order for the conversion 
-			to the UNIX character set to be done correctly.</P
-></LI
-><LI
-><P
-><TT
-CLASS="CONSTANT"
->KOI8-R</TT
-> : Alternate mapping 
-			for Russian Cyrillic UNIX character set. The parameter 
-			<TT
-CLASS="PARAMETER"
-><I
->client code page</I
-></TT
-> <EM
->MUST</EM
-> 
-			be set to code page 866 if the <TT
-CLASS="PARAMETER"
-><I
->character set</I
-></TT
-> 
-			parameter is set to <TT
-CLASS="CONSTANT"
->KOI8-R</TT
-> in order for the 
-			conversion to the UNIX character set to be done correctly.</P
-></LI
-></UL
-><P
-><EM
->BUG</EM
->. These MSDOS code page to UNIX character 
-		set mappings should be dynamic, like the loading of MS DOS code pages, 
-		not static.</P
-><P
->Normally this parameter is not set, meaning no filename 
-		translation is done.</P
-><P
->Default: <B
-CLASS="COMMAND"
->character set = &#60;empty string&#62;</B
-></P
-><P
->Example: <B
-CLASS="COMMAND"
->character set = ISO8859-1</B
-></P
-></DD
-><DT
-><A
-NAME="CLIENTCODEPAGE"
-></A
->client code page (G)</DT
-><DD
-><P
->This parameter specifies the DOS code page 
-		that the clients accessing Samba are using. To determine what code 
-		page a Windows or DOS client is using, open a DOS command prompt 
-		and type the command <B
-CLASS="COMMAND"
->chcp</B
->. This will output 
-		the code page. The default for USA MS-DOS, Windows 95, and
-		Windows NT releases is code page 437. The default for western 
-		European releases of the above operating systems is code page 850.</P
-><P
->This parameter tells <A
-HREF="smbd.8.html"
-TARGET="_top"
->smbd(8)</A
-> 
-		which of the <TT
-CLASS="FILENAME"
->codepage.<TT
-CLASS="REPLACEABLE"
-><I
->XXX</I
-></TT
->
-		</TT
-> files to dynamically load on startup. These files,
-		described more fully in the manual page <A
-HREF="make_smbcodepage.1.html"
-TARGET="_top"
->		<B
-CLASS="COMMAND"
->make_smbcodepage(1)</B
-></A
->, tell <B
-CLASS="COMMAND"
->		smbd</B
-> how to map lower to upper case characters to provide 
-		the case insensitivity of filenames that Windows clients expect.</P
-><P
->Samba currently ships with the following code page files :</P
-><P
-></P
-><UL
-><LI
-><P
->Code Page 437 - MS-DOS Latin US</P
-></LI
-><LI
-><P
->Code Page 737 - Windows '95 Greek</P
-></LI
-><LI
-><P
->Code Page 850 - MS-DOS Latin 1</P
-></LI
-><LI
-><P
->Code Page 852 - MS-DOS Latin 2</P
-></LI
-><LI
-><P
->Code Page 861 - MS-DOS Icelandic</P
-></LI
-><LI
-><P
->Code Page 866 - MS-DOS Cyrillic</P
-></LI
-><LI
-><P
->Code Page 932 - MS-DOS Japanese SJIS</P
-></LI
-><LI
-><P
->Code Page 936 - MS-DOS Simplified Chinese</P
-></LI
-><LI
-><P
->Code Page 949 - MS-DOS Korean Hangul</P
-></LI
-><LI
-><P
->Code Page 950 - MS-DOS Traditional Chinese</P
-></LI
-></UL
-><P
->Thus this parameter may have any of the values 437, 737, 850, 852,
-		861, 932, 936, 949, or 950.  If you don't find the codepage you need,
-		read the comments in one of the other codepage files and the
-		<B
-CLASS="COMMAND"
->make_smbcodepage(1)</B
-> man page and write one. Please 
-		remember to donate it back to the Samba user community.</P
-><P
->This parameter co-operates with the <TT
-CLASS="PARAMETER"
-><I
->valid
-		chars</I
-></TT
-> parameter in determining what characters are
-		valid in filenames and how capitalization is done. If you set both
-		this parameter and the <TT
-CLASS="PARAMETER"
-><I
->valid chars</I
-></TT
-> parameter
-		the <TT
-CLASS="PARAMETER"
-><I
->client code page</I
-></TT
-> parameter 
-		<EM
->MUST</EM
-> be set before the <TT
-CLASS="PARAMETER"
-><I
->valid 
-		chars</I
-></TT
-> parameter in the <TT
-CLASS="FILENAME"
->smb.conf</TT
->
-		file. The <TT
-CLASS="PARAMETER"
-><I
->valid chars</I
-></TT
-> string will then 
-		augment the character settings in the <TT
-CLASS="PARAMETER"
-><I
->client code page</I
-></TT
-> 
-		parameter.</P
-><P
->If not set, <TT
-CLASS="PARAMETER"
-><I
->client code page</I
-></TT
-> defaults 
-		to 850.</P
-><P
->See also : <A
-HREF="#VALIDCHARS"
-><TT
-CLASS="PARAMETER"
-><I
->valid 
-		chars</I
-></TT
-></A
->, <A
-HREF="#CODEPAGEDIRECTORY"
->		<TT
-CLASS="PARAMETER"
-><I
->code page directory</I
-></TT
-></A
-></P
-><P
->Default: <B
-CLASS="COMMAND"
->client code page = 850</B
-></P
-><P
->Example: <B
-CLASS="COMMAND"
->client code page = 936</B
-></P
-></DD
-><DT
-><A
-NAME="CODEPAGEDIRECTORY"
-></A
->code page directory (G)</DT
-><DD
-><P
->Define the location of the various client code page
-		files.</P
-><P
->See also <A
-HREF="#CLIENTCODEPAGE"
-><TT
-CLASS="PARAMETER"
-><I
->client
-		code page</I
-></TT
-></A
-></P
-><P
->Default: <B
-CLASS="COMMAND"
->code page directory = ${prefix}/lib/codepages
-		</B
-></P
-><P
->Example: <B
-CLASS="COMMAND"
->code page directory = /usr/share/samba/codepages
-		</B
-></P
-></DD
-><DT
-><A
-NAME="CODINGSYSTEM"
-></A
->coding system (G)</DT
-><DD
-><P
->This parameter is used to determine how incoming 
-		Shift-JIS Japanese characters are mapped from the incoming <A
-HREF="#CLIENTCODEPAGE"
-><TT
-CLASS="PARAMETER"
-><I
->client code page</I
-></TT
->
-		</A
-> used by the client, into file names in the UNIX filesystem. 
-		Only useful if <TT
-CLASS="PARAMETER"
-><I
->client code page</I
-></TT
-> is set to 
-		932 (Japanese Shift-JIS).  The options are :</P
-><P
-></P
-><UL
-><LI
-><P
-><TT
-CLASS="CONSTANT"
->SJIS</TT
->  - Shift-JIS. Does no 
-			conversion of the incoming filename.</P
-></LI
-><LI
-><P
-><TT
-CLASS="CONSTANT"
->JIS8, J8BB, J8BH, J8@B, 
-			J8@J, J8@H </TT
-> - Convert from incoming Shift-JIS to eight 
-			bit JIS code with different shift-in, shift out codes.</P
-></LI
-><LI
-><P
-><TT
-CLASS="CONSTANT"
->JIS7, J7BB, J7BH, J7@B, J7@J, 
-			J7@H </TT
-> - Convert from incoming Shift-JIS to seven bit 
-			JIS code with different shift-in, shift out codes.</P
-></LI
-><LI
-><P
-><TT
-CLASS="CONSTANT"
->JUNET, JUBB, JUBH, JU@B, JU@J, JU@H </TT
-> 
-			- Convert from incoming Shift-JIS to JUNET code with different shift-in, 
-			shift out codes.</P
-></LI
-><LI
-><P
-><TT
-CLASS="CONSTANT"
->EUC</TT
-> - Convert an incoming 
-			Shift-JIS character to EUC code.</P
-></LI
-><LI
-><P
-><TT
-CLASS="CONSTANT"
->HEX</TT
-> - Convert an incoming 
-			Shift-JIS character to a 3 byte hex representation, i.e. 
-			<TT
-CLASS="CONSTANT"
->:AB</TT
->.</P
-></LI
-><LI
-><P
-><TT
-CLASS="CONSTANT"
->CAP</TT
-> - Convert an incoming 
-			Shift-JIS character to the 3 byte hex representation used by 
-			the Columbia AppleTalk Program (CAP), i.e. <TT
-CLASS="CONSTANT"
->:AB</TT
->.  
-			This is used for compatibility between Samba and CAP.</P
-></LI
-></UL
-><P
->Default: <B
-CLASS="COMMAND"
->coding system = &#60;empty value&#62;</B
->
-		</P
-></DD
-><DT
-><A
 NAME="COMMENT"
 ></A
 >comment (S)</DT
@@ -7073,53 +6513,26 @@ CLASS="PARAMETER"
 ><I
 >security = domain</I
 ></TT
-> and <TT
-CLASS="PARAMETER"
-><I
->delete 
-		user script</I
-></TT
-> must be set to a full pathname for a script 
-		that will delete a UNIX user given one argument of <TT
-CLASS="PARAMETER"
-><I
->%u
-		</I
-></TT
->, which expands into the UNIX user name to delete.
-		<EM
->NOTE</EM
-> that this is different to the <A
-HREF="#ADDUSERSCRIPT"
-><TT
-CLASS="PARAMETER"
-><I
->add user script</I
-></TT
-></A
->
-		which will work with the <TT
+> or <TT
 CLASS="PARAMETER"
 ><I
->security = server</I
+>security =
+		user</I
 ></TT
-> option 
-		as well as <TT
+> and <TT
 CLASS="PARAMETER"
 ><I
->security = domain</I
+>delete user script</I
 ></TT
->. The reason for this
-		is only when Samba is a domain member does it get the information
-		on an attempted user logon that a user no longer exists. In the
-		<TT
+> 
+		must be set to a full pathname for a script 
+		that will delete a UNIX user given one argument of <TT
 CLASS="PARAMETER"
 ><I
->security = server</I
+>%u</I
 ></TT
-> mode a missing user
-		is treated the same as an invalid password logon attempt. Deleting
-		the user in this circumstance would not be a good idea.</P
+>, 
+		which expands into the UNIX user name to delete.</P
 ><P
 >When the Windows user attempts to access the Samba server, 
 		at <EM
@@ -18385,136 +17798,6 @@ CLASS="FILENAME"
 ></DD
 ><DT
 ><A
-NAME="VALIDCHARS"
-></A
->valid chars (G)</DT
-><DD
-><P
->The option allows you to specify additional 
-		characters that should be considered valid by the server in 
-		filenames. This is particularly useful for national character 
-		sets, such as adding u-umlaut or a-ring.</P
-><P
->The option takes a list of characters in either integer 
-		or character form with spaces between them. If you give two 
-		characters with a colon between them then it will be taken as 
-		an lowercase:uppercase pair.</P
-><P
->If you have an editor capable of entering the characters 
-		into the config file then it is probably easiest to use this 
-		method. Otherwise you can specify the characters in octal, 
-		decimal or hexadecimal form using the usual C notation.</P
-><P
->For example to add the single character 'Z' to the charset 
-		(which is a pointless thing to do as it's already there) you could 
-		do one of the following</P
-><P
-><TABLE
-BORDER="0"
-BGCOLOR="#E0E0E0"
-WIDTH="90%"
-><TR
-><TD
-><PRE
-CLASS="PROGRAMLISTING"
->		valid chars = Z
-		valid chars = z:Z
-		valid chars = 0132:0172
-		</PRE
-></TD
-></TR
-></TABLE
-></P
-><P
->The last two examples above actually add two characters, 
-		and alter the uppercase and lowercase mappings appropriately.</P
-><P
->Note that you <EM
->MUST</EM
-> specify this parameter 
-		after the <TT
-CLASS="PARAMETER"
-><I
->client code page</I
-></TT
-> parameter if you 
-		have both set. If <TT
-CLASS="PARAMETER"
-><I
->client code page</I
-></TT
-> is set after 
-		the <TT
-CLASS="PARAMETER"
-><I
->valid chars</I
-></TT
-> parameter the <TT
-CLASS="PARAMETER"
-><I
->valid 
-		chars</I
-></TT
-> settings will be overwritten.</P
-><P
->See also the <A
-HREF="#CLIENTCODEPAGE"
-><TT
-CLASS="PARAMETER"
-><I
->client 
-		code page</I
-></TT
-></A
-> parameter.</P
-><P
->Default: <EM
->Samba defaults to using a reasonable set 
-		of valid characters for English systems</EM
-></P
-><P
->Example: <B
-CLASS="COMMAND"
->valid chars = 0345:0305 0366:0326 0344:0304
-		</B
-></P
-><P
->The above example allows filenames to have the Swedish 
-		characters in them.</P
-><P
-><EM
->NOTE:</EM
-> It is actually quite difficult to 
-		correctly produce a <TT
-CLASS="PARAMETER"
-><I
->valid chars</I
-></TT
-> line for 
-		a particular system. To automate the process <A
-HREF="mailto:tino@augsburg.net"
-TARGET="_top"
->tino@augsburg.net</A
-> has written 
-		a package called <B
-CLASS="COMMAND"
->validchars</B
-> which will automatically 
-		produce a complete <TT
-CLASS="PARAMETER"
-><I
->valid chars</I
-></TT
-> line for
-		a given client system. Look in the <TT
-CLASS="FILENAME"
->examples/validchars/
-		</TT
-> subdirectory of your Samba source code distribution 
-		for this package.</P
-></DD
-><DT
-><A
 NAME="VALIDUSERS"
 ></A
 >valid users (S)</DT
@@ -19409,7 +18692,7 @@ CLASS="COMMAND"
 ><DIV
 CLASS="REFSECT1"
 ><A
-NAME="AEN6125"
+NAME="AEN5915"
 ></A
 ><H2
 >WARNINGS</H2
@@ -19439,7 +18722,7 @@ TARGET="_top"
 ><DIV
 CLASS="REFSECT1"
 ><A
-NAME="AEN6131"
+NAME="AEN5921"
 ></A
 ><H2
 >VERSION</H2
@@ -19450,7 +18733,7 @@ NAME="AEN6131"
 ><DIV
 CLASS="REFSECT1"
 ><A
-NAME="AEN6134"
+NAME="AEN5924"
 ></A
 ><H2
 >SEE ALSO</H2
@@ -19529,7 +18812,7 @@ CLASS="COMMAND"
 ><DIV
 CLASS="REFSECT1"
 ><A
-NAME="AEN6154"
+NAME="AEN5944"
 ></A
 ><H2
 >AUTHOR</H2
diff --git a/docs/manpages/smb.conf.5 b/docs/manpages/smb.conf.5
index 82e1bbbf6d..7b24cfddc6 100644
--- a/docs/manpages/smb.conf.5
+++ b/docs/manpages/smb.conf.5
@@ -3,7 +3,7 @@
 .\" <http://shell.ipoline.com/~elmert/hacks/docbook2X/> 
 .\" Please send any bug reports, improvements, comments, patches, 
 .\" etc. to Steve Cheng <steve@ggi-project.org>.
-.TH "SMB.CONF" "5" "28 January 2002" "" ""
+.TH "SMB.CONF" "5" "19 February 2002" "" ""
 .SH NAME
 smb.conf \- The configuration file for the Samba suite
 .SH "SYNOPSIS"
@@ -545,18 +545,6 @@ each parameter for details. Note that some are synonyms.
 \fIchange share command\fR
 .TP 0.2i
 \(bu
-\fIcharacter set\fR
-.TP 0.2i
-\(bu
-\fIclient code page\fR
-.TP 0.2i
-\(bu
-\fIcode page directory\fR
-.TP 0.2i
-\(bu
-\fIcoding system\fR
-.TP 0.2i
-\(bu
 \fIconfig file\fR
 .TP 0.2i
 \(bu
@@ -1007,9 +995,6 @@ each parameter for details. Note that some are synonyms.
 \fIutmp directory\fR
 .TP 0.2i
 \(bu
-\fIvalid chars\fR
-.TP 0.2i
-\(bu
 \fIwinbind cache time\fR
 .TP 0.2i
 \(bu
@@ -1560,7 +1545,8 @@ Windows NT PDC is an onerous task. This option allows smbdto create the required
 \fBON DEMAND\fR when a user accesses the Samba server.
 
 In order to use this option, smbd
-must be set to \fIsecurity = server\fR or \fI security = domain\fR and \fIadd user script\fR
+must \fBNOT\fR be set to \fIsecurity = share\fR
+and \fIadd user script\fR
 must be set to a full pathname for a script that will create a UNIX 
 user given one argument of \fI%u\fR, which expands into 
 the UNIX user name to create.
@@ -1834,208 +1820,6 @@ Default: \fBnone\fR
 Example: \fBchange share command = /usr/local/bin/addshare\fR
 .PP
 .TP
-\fBcharacter set (G)\fR
-This allows smbdto map incoming filenames 
-from a DOS Code page (see the client 
-code page parameter) to several built in UNIX character sets. 
-The built in code page translations are:
-.RS
-.TP 0.2i
-\(bu
-ISO8859-1 : Western European 
-UNIX character set. The parameter \fIclient code page\fR
-\fBMUST\fR be set to code page 850 if the 
-\fIcharacter set\fR parameter is set to
-ISO8859-1 in order for the conversion to the 
-UNIX character set to be done correctly.
-.TP 0.2i
-\(bu
-ISO8859-2 : Eastern European 
-UNIX character set. The parameter \fIclient code page
-\fR\fBMUST\fR be set to code page 852 if 
-the \fI character set\fR parameter is set 
-to ISO8859-2 in order for the conversion 
-to the UNIX character set to be done correctly. 
-.TP 0.2i
-\(bu
-ISO8859-5 : Russian Cyrillic 
-UNIX character set. The parameter \fIclient code page
-\fR\fBMUST\fR be set to code page 
-866 if the \fIcharacter set \fR parameter is 
-set to ISO8859-5 in order for the conversion 
-to the UNIX character set to be done correctly. 
-.TP 0.2i
-\(bu
-ISO8859-7 : Greek UNIX 
-character set. The parameter \fIclient code page
-\fR\fBMUST\fR be set to code page 
-737 if the \fIcharacter set\fR parameter is 
-set to ISO8859-7 in order for the conversion 
-to the UNIX character set to be done correctly.
-.TP 0.2i
-\(bu
-KOI8-R : Alternate mapping 
-for Russian Cyrillic UNIX character set. The parameter 
-\fIclient code page\fR \fBMUST\fR 
-be set to code page 866 if the \fIcharacter set\fR 
-parameter is set to KOI8-R in order for the 
-conversion to the UNIX character set to be done correctly.
-.RE
-.PP
-\fBBUG\fR. These MSDOS code page to UNIX character 
-set mappings should be dynamic, like the loading of MS DOS code pages, 
-not static.
-.PP
-.PP
-Normally this parameter is not set, meaning no filename 
-translation is done.
-.PP
-.PP
-Default: \fBcharacter set = <empty string>\fR
-.PP
-.PP
-Example: \fBcharacter set = ISO8859-1\fR
-.PP
-.TP
-\fBclient code page (G)\fR
-This parameter specifies the DOS code page 
-that the clients accessing Samba are using. To determine what code 
-page a Windows or DOS client is using, open a DOS command prompt 
-and type the command \fBchcp\fR. This will output 
-the code page. The default for USA MS-DOS, Windows 95, and
-Windows NT releases is code page 437. The default for western 
-European releases of the above operating systems is code page 850.
-
-This parameter tells smbd(8)
-which of the \fIcodepage.XXX
-\fRfiles to dynamically load on startup. These files,
-described more fully in the manual page  \fBmake_smbcodepage(1)\fR, tell \fB smbd\fR how to map lower to upper case characters to provide 
-the case insensitivity of filenames that Windows clients expect.
-
-Samba currently ships with the following code page files :
-.RS
-.TP 0.2i
-\(bu
-Code Page 437 - MS-DOS Latin US
-.TP 0.2i
-\(bu
-Code Page 737 - Windows '95 Greek
-.TP 0.2i
-\(bu
-Code Page 850 - MS-DOS Latin 1
-.TP 0.2i
-\(bu
-Code Page 852 - MS-DOS Latin 2
-.TP 0.2i
-\(bu
-Code Page 861 - MS-DOS Icelandic
-.TP 0.2i
-\(bu
-Code Page 866 - MS-DOS Cyrillic
-.TP 0.2i
-\(bu
-Code Page 932 - MS-DOS Japanese SJIS
-.TP 0.2i
-\(bu
-Code Page 936 - MS-DOS Simplified Chinese
-.TP 0.2i
-\(bu
-Code Page 949 - MS-DOS Korean Hangul
-.TP 0.2i
-\(bu
-Code Page 950 - MS-DOS Traditional Chinese
-.RE
-.PP
-Thus this parameter may have any of the values 437, 737, 850, 852,
-861, 932, 936, 949, or 950. If you don't find the codepage you need,
-read the comments in one of the other codepage files and the
-\fBmake_smbcodepage(1)\fR man page and write one. Please 
-remember to donate it back to the Samba user community.
-.PP
-.PP
-This parameter co-operates with the \fIvalid
-chars\fR parameter in determining what characters are
-valid in filenames and how capitalization is done. If you set both
-this parameter and the \fIvalid chars\fR parameter
-the \fIclient code page\fR parameter 
-\fBMUST\fR be set before the \fIvalid 
-chars\fR parameter in the \fIsmb.conf\fR
-file. The \fIvalid chars\fR string will then 
-augment the character settings in the \fIclient code page\fR 
-parameter.
-.PP
-.PP
-If not set, \fIclient code page\fR defaults 
-to 850.
-.PP
-.PP
-See also : \fIvalid 
-chars\fR,  \fIcode page directory\fR
-.PP
-.PP
-Default: \fBclient code page = 850\fR
-.PP
-.PP
-Example: \fBclient code page = 936\fR
-.PP
-.TP
-\fBcode page directory (G)\fR
-Define the location of the various client code page
-files.
-
-See also \fIclient
-code page\fR
-
-Default: \fBcode page directory = ${prefix}/lib/codepages
-\fR
-Example: \fBcode page directory = /usr/share/samba/codepages
-\fR.TP
-\fBcoding system (G)\fR
-This parameter is used to determine how incoming 
-Shift-JIS Japanese characters are mapped from the incoming \fIclient code page\fR
-used by the client, into file names in the UNIX filesystem. 
-Only useful if \fIclient code page\fR is set to 
-932 (Japanese Shift-JIS). The options are :
-.RS
-.TP 0.2i
-\(bu
-SJIS - Shift-JIS. Does no 
-conversion of the incoming filename.
-.TP 0.2i
-\(bu
-JIS8, J8BB, J8BH, J8@B, 
-J8@J, J8@H  - Convert from incoming Shift-JIS to eight 
-bit JIS code with different shift-in, shift out codes.
-.TP 0.2i
-\(bu
-JIS7, J7BB, J7BH, J7@B, J7@J, 
-J7@H  - Convert from incoming Shift-JIS to seven bit 
-JIS code with different shift-in, shift out codes.
-.TP 0.2i
-\(bu
-JUNET, JUBB, JUBH, JU@B, JU@J, JU@H  
-- Convert from incoming Shift-JIS to JUNET code with different shift-in, 
-shift out codes.
-.TP 0.2i
-\(bu
-EUC - Convert an incoming 
-Shift-JIS character to EUC code.
-.TP 0.2i
-\(bu
-HEX - Convert an incoming 
-Shift-JIS character to a 3 byte hex representation, i.e. 
-:AB.
-.TP 0.2i
-\(bu
-CAP - Convert an incoming 
-Shift-JIS character to the 3 byte hex representation used by 
-the Columbia AppleTalk Program (CAP), i.e. :AB. 
-This is used for compatibility between Samba and CAP.
-.RE
-.PP
-Default: \fBcoding system = <empty value>\fR
-.PP
-.TP
 \fBcomment (S)\fR
 This is a text field that is seen next to a share 
 when a client does a queries the server, either via the network 
@@ -2350,18 +2134,11 @@ DEMAND\fR when a user accesses the Samba server and the
 Windows NT user no longer exists.
 
 In order to use this option, \fBsmbd\fR must be 
-set to \fIsecurity = domain\fR and \fIdelete 
-user script\fR must be set to a full pathname for a script 
-that will delete a UNIX user given one argument of \fI%u
-\fR, which expands into the UNIX user name to delete.
-\fBNOTE\fR that this is different to the \fIadd user script\fR
-which will work with the \fIsecurity = server\fR option 
-as well as \fIsecurity = domain\fR. The reason for this
-is only when Samba is a domain member does it get the information
-on an attempted user logon that a user no longer exists. In the
-\fIsecurity = server\fR mode a missing user
-is treated the same as an invalid password logon attempt. Deleting
-the user in this circumstance would not be a good idea.
+set to \fIsecurity = domain\fR or \fIsecurity =
+user\fR and \fIdelete user script\fR 
+must be set to a full pathname for a script 
+that will delete a UNIX user given one argument of \fI%u\fR, 
+which expands into the UNIX user name to delete.
 
 When the Windows user attempts to access the Samba server, 
 at \fBlogin\fR (session setup in the SMB protocol) 
@@ -6989,64 +6766,6 @@ native system is set to use (usually
 
 Default: \fBno utmp directory\fR
 .TP
-\fBvalid chars (G)\fR
-The option allows you to specify additional 
-characters that should be considered valid by the server in 
-filenames. This is particularly useful for national character 
-sets, such as adding u-umlaut or a-ring.
-
-The option takes a list of characters in either integer 
-or character form with spaces between them. If you give two 
-characters with a colon between them then it will be taken as 
-an lowercase:uppercase pair.
-
-If you have an editor capable of entering the characters 
-into the config file then it is probably easiest to use this 
-method. Otherwise you can specify the characters in octal, 
-decimal or hexadecimal form using the usual C notation.
-
-For example to add the single character 'Z' to the charset 
-(which is a pointless thing to do as it's already there) you could 
-do one of the following
-
-.sp
-.nf
-		valid chars = Z
-		valid chars = z:Z
-		valid chars = 0132:0172
-		
-.sp
-.fi
-
-The last two examples above actually add two characters, 
-and alter the uppercase and lowercase mappings appropriately.
-
-Note that you \fBMUST\fR specify this parameter 
-after the \fIclient code page\fR parameter if you 
-have both set. If \fIclient code page\fR is set after 
-the \fIvalid chars\fR parameter the \fIvalid 
-chars\fR settings will be overwritten.
-
-See also the \fIclient 
-code page\fR parameter.
-
-Default: \fBSamba defaults to using a reasonable set 
-of valid characters for English systems\fR
-
-Example: \fBvalid chars = 0345:0305 0366:0326 0344:0304
-\fR
-The above example allows filenames to have the Swedish 
-characters in them.
-
-\fBNOTE:\fR It is actually quite difficult to 
-correctly produce a \fIvalid chars\fR line for 
-a particular system. To automate the process tino@augsburg.net <URL:mailto:tino@augsburg.net> has written 
-a package called \fBvalidchars\fR which will automatically 
-produce a complete \fIvalid chars\fR line for
-a given client system. Look in the \fIexamples/validchars/
-\fRsubdirectory of your Samba source code distribution 
-for this package.
-.TP
 \fBvalid users (S)\fR
 This is a list of users that should be allowed 
 to login to this service. Names starting with '@', '+' and '&'