diff options
| author | Andrew Tridgell <tridge@samba.org> | 1999-12-13 13:35:20 +0000 |
|---|---|---|
| committer | Andrew Tridgell <tridge@samba.org> | 1999-12-13 13:35:20 +0000 |
| commit | 32a965e09ce4befe971855e11e1fb5ceb51a9ed1 (patch) | |
| tree | 157f164263a56d7e3f2ca1fe9a05a9df24f25234 /docs | |
| parent | 3db52feb1f3b2c07ce0b06ad4a7099fa6efe3fc7 (diff) | |
| download | samba-32a965e09ce4befe971855e11e1fb5ceb51a9ed1.tar.gz samba-32a965e09ce4befe971855e11e1fb5ceb51a9ed1.tar.bz2 samba-32a965e09ce4befe971855e11e1fb5ceb51a9ed1.zip | |
2nd phase of head branch sync with SAMBA_2_0 - this delets all the files that were in the head branch but weren't in SAMBA_2_0
(This used to be commit d7b208786590b5a28618590172b8d523627dda09)
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/VFS.txt | 9 | ||||
| -rw-r--r-- | docs/htmldocs/LDAP.html | 147 | ||||
| -rw-r--r-- | docs/htmldocs/debug2html.1.html | 68 | ||||
| -rw-r--r-- | docs/htmldocs/rpcclient.1.html | 651 | ||||
| -rw-r--r-- | docs/manpages/debug2html.1 | 54 | ||||
| -rw-r--r-- | docs/manpages/rpcclient.1 | 809 | ||||
| -rw-r--r-- | docs/textdocs/LDAP.txt | 150 | ||||
| -rw-r--r-- | docs/textdocs/README.smbmount | 51 | ||||
| -rw-r--r-- | docs/textdocs/rpcclient.1.txt | 685 | ||||
| -rw-r--r-- | docs/yodldocs/LDAP.yo | 161 | ||||
| -rw-r--r-- | docs/yodldocs/debug2html.1.yo | 62 | ||||
| -rw-r--r-- | docs/yodldocs/rpcclient.1.yo | 861 |
12 files changed, 0 insertions, 3708 deletions
diff --git a/docs/VFS.txt b/docs/VFS.txt deleted file mode 100644 index 455fde910a..0000000000 --- a/docs/VFS.txt +++ /dev/null @@ -1,9 +0,0 @@ -!== -!== VFS.txt -!== -Contributor: Tim Potter -Updated: April 5, 1999 - -Subject: Implementing a virtual filesystem for Samba -=========================================================== - diff --git a/docs/htmldocs/LDAP.html b/docs/htmldocs/LDAP.html deleted file mode 100644 index 1cc8f8213f..0000000000 --- a/docs/htmldocs/LDAP.html +++ /dev/null @@ -1,147 +0,0 @@ - - - - -<html><head><title>LDAP Support in Samba</title> - -<link rev="made" href="mailto:samba-bugs@samba.org"> -</head> -<body> - -<hr> - -<h1>LDAP Support in Samba</h1> -<h2>Matthew Chapman</h2> -<h2>29th November 1998 -<p> <hr> <h2> -WARNING: This is experimental code. Use at your own risk, and please report -any bugs (after reading BUGS.txt). -</h2> <br> -</h2> - - -<a href="LDAP.html#l1"><h2>1: What is LDAP?</h2> </a> -<a href="LDAP.html#l2"><h2>2: Why LDAP and Samba?</h2> </a> -<a href="LDAP.html#l3"><h2>3: Using LDAP with Samba</h2> </a> -<a href="LDAP.html#l4"><h2>4: Using LDAP for Unix authentication</h2> </a> -<a href="LDAP.html#l5"><h2>5: Compatibility with Active Directory</h2> </a> - -<p><hr><p><br> -<p> - <a name="l1"></a> -<h2>1: What is LDAP?</h2> -A directory is a type of hierarchical database optimised for simple query -operations, often used for storing user information. LDAP is the -Lightweight Directory Access Protocol, a protocol which is rapidly -becoming the Internet standard for accessing directories.<p> - Many client applications now support LDAP (including Microsoft's Active -Directory), and there are a number of servers available. The most popular -implementation for Unix is from the <em>University of Michigan</em>; its -homepage is at <a href="http://www.umich.edu/~dirsvcs/ldap/"><code>http://www.umich.edu/~dirsvcs/ldap/</code></a>.<p> - Information in an LDAP tree always comes in <code>attribute=value</code> pairs. -The following is an example of a Samba user entry:<p> - <pre> -uid=jbloggs, dc=samba, dc=org -objectclass=sambaAccount -uid=jbloggs -cn=Joe Bloggs -description=Samba User -uidNumber=500 -gidNumber=500 -rid=2000 -grouprid=2001 -lmPassword=46E389809F8D55BB78A48108148AD508 -ntPassword=1944CCE1AD6F80D8AEC9FC5BE77696F4 -pwdLastSet=35C11F1B -smbHome=\\samba1\jbloggs -homeDrive=Z -script=logon.bat -profile=\\samba1\jbloggs\profile -workstations=JOE -</pre> -<p> - Note that the top line is a special set of attributes called a -<em>distinguished name</em> which identifies the location of this entry beneath -the directory's root node. Recent Internet standards suggest the use of -domain-based naming using <code>dc</code> attributes (for instance, a microsoft.com -directory should have a root node of <code>dc=microsoft, dc=com</code>), although -this is not strictly necessary for isolated servers.<p> - There are a number of LDAP-related FAQ's on the internet, although -generally the best source of information is the documentation for the -individual servers.<p> - <br> -<a name="l2"></a> -<h2>2: Why LDAP and Samba?</h2><p> - Using an LDAP directory allows Samba to store user and group information -more reliably and flexibly than the current combination of smbpasswd, -smbgroup, groupdb and aliasdb with the Unix databases. If a need emerges -for extra user information to be stored, this can easily be added without -loss of backwards compatibility.<p> - In addition, the Samba LDAP schema is compatible with RFC2307, allowing -Unix password database information to be stored in the same entries. This -provides a single, consistent repository for both Unix and Windows user -information.<p> - <br> -<a name="l3"></a> -<h2>3: Using LDAP with Samba</h2><p> - <ol><p> - <li> Install and configure an LDAP server if you do not already have -one. You should read your LDAP server's documentation and set up the -configuration file and access control as desired.<p> - <li> Build Samba (latest CVS is required) with:<p> - <pre> - ./configure --with-ldap - make clean; make install -</pre> -<p> - <li> Add the following options to the global section of <code>smb.conf</code> as -required.<p> - <ul> -<li><strong>ldap suffix</strong><p> - This parameter specifies the node of the LDAP tree beneath which -Samba should store its information. This parameter MUST be provided -when using LDAP with Samba.<p> - <strong>Default:</strong> <code>none</code><p> - <strong>Example:</strong> <code>ldap suffix = "dc=mydomain, dc=org"</code><p> - <li><strong>ldap bind as</strong><p> - This parameter specifies the entity to bind to an LDAP directory as. -Usually it should be safe to use the LDAP root account; for larger -installations it may be preferable to restrict Samba's access.<p> - <strong>Default:</strong> <code>none (bind anonymously)</code><p> - <strong>Example:</strong> <code>ldap bind as = "uid=root, dc=mydomain, dc=org"</code><p> - <li><strong>ldap passwd file</strong><p> - This parameter specifies a file containing the password with which -Samba should bind to an LDAP server. For obvious security reasons -this file must be set to mode 700 or less.<p> - <strong>Default:</strong> <code>none (bind anonymously)</code><p> - <strong>Example:</strong> <code>ldap passwd file = /usr/local/samba/private/ldappasswd</code><p> - <li><strong>ldap server</strong><p> - This parameter specifies the DNS name of the LDAP server to use -when storing and retrieving information about Samba users and -groups.<p> - <strong>Default:</strong> <code>ldap server = localhost</code><p> - <li><strong>ldap port</strong><p> - This parameter specifies the TCP port number of the LDAP server.<p> - <strong>Default:</strong> <code>ldap port = 389</code><p> - </ul><p> - <li> You should then be able to use the normal smbpasswd(8) command for -account administration (or User Manager in the near future).<p> - </ol><p> - <br> -<a name="l4"></a> -<h2>4: Using LDAP for Unix authentication</h2><p> - The Samba LDAP code was designed to utilise RFC2307-compliant directory -entries if available. RFC2307 is a proposed standard for LDAP user -information which has been adopted by a number of vendors. Further -information is available at <a href="http://www.xedoc.com.au/~lukeh/ldap"><code>http://www.xedoc.com.au/~lukeh/ldap/</code></a>.<p> - Of particular interest is Luke Howard's nameservice switch module -(nss_ldap) and PAM module (pam_ldap) implementing this standard, providing -LDAP-based password databases for Unix. If you are setting up a server to -provide integrated Unix/NT services than these are worth investigating.<p> - <br> -<a name="l5"></a> -<h2>5: Compatibility with Active Directory</h2><p> - The current implementation is not designed to be used with Microsoft -Active Directory, although compatibility may be added in the future.<p> - </body> -</html> diff --git a/docs/htmldocs/debug2html.1.html b/docs/htmldocs/debug2html.1.html deleted file mode 100644 index d0d6373a3d..0000000000 --- a/docs/htmldocs/debug2html.1.html +++ /dev/null @@ -1,68 +0,0 @@ - - - - - -<html><head><title>debug2html(1)</title> - -<link rev="made" href="mailto:samba-bugs@samba.org"> -</head> -<body> - -<hr> - -<h1>debug2html(1)</h1> -<h2>Samba</h2> -<h2>29 Dec 1998</h2> - - - - -<p><br><a name="NAME"></a> -<h2>NAME</h2> - debug2html - Samba DEBUG to HTML translation filter -<p><br><a name="SYNOPSIS"></a> -<h2>SYNOPSIS</h2> - -<p><br>debug2html [input-file [output-file]] -<p><br><a name="DESCRIPTION"></a> -<h2>DESCRIPTION</h2> - -<p><br>This program is part of the <strong>Samba</strong> suite. -<p><br><strong>debug2html</strong> generates HTML files from Samba log files. Log files -produced by <strong>nmbd</strong>(8) or <strong>smbd</strong>(8) may then be viewed by a web -browser. The output conforms to the HTML 3.2 specification. -<p><br>The filenames specified on the command line are optional. If the -output-file is ommitted, output will go to <strong>stdout</strong>. If the input-file -is ommitted, <strong>debug2html</strong> will read from <strong>stdin</strong>. The filename "-" -can be used to indicate that input should be read from <strong>stdin</strong>. For -example: -<p><br><code>cat /usr/local/samba/var/log.nmb | debug2html - nmblog.html</code> <br> -<p><br><a name="VERSION"></a> -<h2>VERSION</h2> - -<p><br>This man page is correct for version 2.0 of the Samba suite. -<p><br><a name="SEEALSO"></a> -<h2>SEE ALSO</h2> - -<p><br><a href="nmbd.8.html"><strong>nmbd</strong>(8)</a>, <a href="smbd.8.html"><strong>smbd</strong>(8)</a>, -<a href="samba.7.html"><strong>samba</strong>(7)</a>. -<p><br><a name="AUTHOR"></a> -<h2>AUTHOR</h2> - -<p><br>The original Samba software and related utilities were created by -Andrew Tridgell <a href="mailto:samba-bugs@samba.org"><em>samba-bugs@samba.org</em></a>. Samba is now developed -by the Samba Team as an Open Source project similar to the way the -Linux kernel is developed. -<p><br>The original Samba man pages were written by Karl Auer. The man page -sources were converted to YODL format (another excellent piece of Open -Source software, available at -<a href="ftp://ftp.icce.rug.nl/pub/unix/"><strong>ftp://ftp.icce.rug.nl/pub/unix/</strong></a>) -and updated for the Samba2.0 release by Jeremy Allison. -<a href="mailto:samba-bugs@samba.org"><em>samba-bugs@samba.org</em></a>. -<p><br><strong>debug2html</strong> was added by Chris Hertel. -<p><br>See <a href="samba.7.html"><strong>samba</strong>(7)</a> to find out how to get a full -list of contributors and details on how to submit bug reports, -comments etc. -</body> -</html> diff --git a/docs/htmldocs/rpcclient.1.html b/docs/htmldocs/rpcclient.1.html deleted file mode 100644 index 6e5cf88866..0000000000 --- a/docs/htmldocs/rpcclient.1.html +++ /dev/null @@ -1,651 +0,0 @@ - - - - - -<html><head><title>rpcclient (1)</title> - -<link rev="made" href="mailto:samba-bugs@samba.org"> -</head> -<body> - -<hr> - -<h1>rpcclient (1)</h1> -<h2>Samba</h2> -<h2>23 Oct 1998</h2> - - - - -<p><br><a name="NAME"></a> -<h2>NAME</h2> - rpcclient - utility to manage MSRPC resources on servers -<p><br><a name="SYNOPSIS"></a> -<h2>SYNOPSIS</h2> - -<p><br><strong>rpcclient</strong> -[<a href="rpcclient.1.html#password">password</a>] -<a href="rpcclient.1.html#servername">-S servername</a> -[<a href="rpcclient.1.html#minusU">-U [username][%][password]</a>] -[<a href="rpcclient.1.html#minusW">-W domain</a>] -[<a href="rpcclient.1.html#minusl">-l log basename</a>] -[<a href="rpcclient.1.html#minusd">-d debuglevel</a>] -[<a href="rpcclient.1.html#minusO">-O socket options</a>] -[<a href="rpcclient.1.html#minusi">-i scope</a>] -[<a href="rpcclient.1.html#minusN">-N</a>] -[<a href="rpcclient.1.html#minusn">-n NetBIOS name</a>] -[<a href="rpcclient.1.html#minush">-h</a>] -[<a href="rpcclient.1.html#minusI">-I dest IP</a>] -[<a href="rpcclient.1.html#minusE">-E</a>] -[<a href="rpcclient.1.html#minust">-t terminal code</a>] -[<a href="rpcclient.1.html#minusc">-c command string</a>] -[<a href="rpcclient.1.html#minusB">-B IP addr</a>] -[<a href="rpcclient.1.html#minuss">-s smb.conf</a>] -[<a href="rpcclient.1.html#minusm">-m max protocol</a>] -<p><br><a name="DESCRIPTION"></a> -<h2>DESCRIPTION</h2> - -<p><br>This program is part of the <strong>Samba</strong> suite. -<p><br><strong>rpcclient</strong> is a client that can 'talk' to an SMB/CIFS MSRPC server. -Operations include things like managing a SAM Database (users, groups -and aliases) in the same way as the Windows NT programs -<strong>User Manager for Domains</strong> and <strong>Server Manager for Domains</strong>; -managing a remote registry in the same way as the Windows NT programs -<strong>REGEDT32.EXE</strong> and <strong>REGEDIT.EXE</strong>; viewing a remote event log (same -as <strong>EVENTVWR.EXE</strong>) etc. -<p><br>Typical usage is like this: <br> -<code>rpcclient -I 192.168.32.1 -S "*SMBSERVER" -U fred%secret -l log</code> -<br> -<p><br><a name="OPTIONS"></a> -<h2>OPTIONS</h2> - -<p><br><ul> -<p><br><a name="servername"></a> -<li><strong><strong>servername</strong></strong> servername is the name of the server you want -to use on the server. This should be the NetBIOS name of the SMB/CIFS -server, which can be <strong>*SMBSERVER</strong> on Windows NT 4.0 or Samba Servers. -<p><br>Note that the server name required is NOT necessarily the IP (DNS) -host name of the server! The name required is a NetBIOS server name, -which may or may not be the same as the IP hostname of the machine -running the server. Also, remember that having a period in a NetBIOS -name (such as an IP hostname) may cause connectivity problems on your -network: NT tends to strip NetBIOS names from the leading period -onwards. -<p><br>The server name is looked up according to either the -<a href="rpcclient.1.html#minusR"><strong>-R</strong></a> parameter to <strong>rpcclient</strong> or using the -<a href="smb.conf.5.html#nameresolveorder"><strong>name resolve order</strong></a> -parameter in the smb.conf file, allowing an administrator to change -the order and methods by which server names are looked up. -<p><br><a name="password"></a> -<li><strong><strong>password</strong></strong> password is the password required to access the -specified service on the specified server. If this parameter is -supplied, the <a href="rpcclient.1.html#minusN"><strong>-N</strong></a> option (suppress password prompt) is assumed. -<p><br>There is no default password. If no password is supplied on the -command line (either by using this parameter or adding a password to -the <a href="rpcclient.1.html#minusU"><strong>-U</strong></a> option (see below)) and the <a href="rpcclient.1.html#minusN"><strong>-N</strong></a> option is not specified, -the client will prompt for a password, even if the desired service -does not require one. (If no password is required, simply press ENTER -to provide a null password.) -<p><br>Note: Some servers (including OS/2 and Windows for Workgroups) insist -on an uppercase password. Lowercase or mixed case passwords may be -rejected by these servers. -<p><br>Be cautious about including passwords in scripts. -<p><br><a name="minuss"></a> -<li><strong><strong>-s smb.conf</strong></strong> This parameter specifies the pathname to the -Samba configuration file, smb.conf. This file controls all aspects of -the Samba setup on the machine and rpcclient also needs to read this -file. -<p><br><a name="minusB"></a> -<li><strong><strong>-B IP addr</strong></strong> The IP address to use when sending a broadcast packet. -<p><br><a name="minusO"></a> -<li><strong><strong>-O socket options</strong></strong> TCP socket options to set on the client -socket. See the <a href="smb.conf.5.html#socketoptions">socket options</a> -parameter in the <a href="smb.conf.5.html"><strong>smb.conf (5)</strong></a> manpage for -the list of valid options. -<p><br><a name="minusR"></a> -<li><strong><strong>-R name resolve order</strong></strong> This option allows the user of -rpcclient to determine what name resolution services to use when -looking up the NetBIOS name of the host being connected to. -<p><br>The options are :"lmhosts", "host", "wins" and "bcast". They cause -names to be resolved as follows : -<p><br><ul> -<p><br><li > <strong>lmhosts</strong> : Lookup an IP address in the Samba lmhosts file. -The lmhosts file is stored in the same directory as the -<a href="smb.conf.5.html"><strong>smb.conf</strong></a> file. -<p><br><li > <strong>host</strong> : Do a standard host name to IP address resolution, -using the system /etc/hosts, NIS, or DNS lookups. This method of name -resolution is operating system depended for instance on IRIX or -Solaris this may be controlled by the <em>/etc/nsswitch.conf</em> file). -<p><br><li > <strong>wins</strong> : Query a name with the IP address listed in the <a href="smb.conf.5.html#winsserver"><strong>wins -server</strong></a> parameter in the smb.conf file. If -no WINS server has been specified this method will be ignored. -<p><br><li > <strong>bcast</strong> : Do a broadcast on each of the known local interfaces -listed in the <a href="smb.conf.5.html#interfaces"><strong>interfaces</strong></a> parameter -in the smb.conf file. This is the least reliable of the name resolution -methods as it depends on the target host being on a locally connected -subnet. To specify a particular broadcast address the <a href="rpcclient.1.html#minusB"><strong>-B</strong></a> option -may be used. -<p><br></ul> -<p><br>If this parameter is not set then the name resolve order defined -in the <a href="smb.conf.5.html"><strong>smb.conf</strong></a> file parameter -<a href="smb.conf.5.html#nameresolveorder">(<strong>name resolve order</strong>)</a> -will be used. -<p><br>The default order is lmhosts, host, wins, bcast and without this -parameter or any entry in the <a href="smb.conf.5.html#nameresolveorder"><strong>"name resolve -order"</strong></a> parameter of the -<a href="smb.conf.5.html"><strong>smb.conf</strong></a> file the name resolution methods -will be attempted in this order. -<p><br><a name="minusi"></a> -<li><strong><strong>-i scope</strong></strong> This specifies a NetBIOS scope that rpcclient will use -to communicate with when generating NetBIOS names. For details on the -use of NetBIOS scopes, see rfc1001.txt and rfc1002.txt. NetBIOS scopes -are <em>very</em> rarely used, only set this parameter if you are the -system administrator in charge of all the NetBIOS systems you -communicate with. -<p><br><a name="minusN"></a> -<li><strong><strong>-N</strong></strong> If specified, this parameter suppresses the normal -password prompt from the client to the user. This is useful when -accessing a service that does not require a password. -<p><br>Unless a password is specified on the command line or this parameter -is specified, the client will request a password. -<p><br><a name="minusn"></a> -<li><strong><strong>-n NetBIOS name</strong></strong> By default, the client will use the local -machine's hostname (in uppercase) as its NetBIOS name. This parameter -allows you to override the host name and use whatever NetBIOS name you -wish. -<p><br><a name="minusd"></a> -<li><strong><strong>-d debuglevel</strong></strong> debuglevel is an integer from 0 to 10, or the -letter 'A'. -<p><br>The default value if this parameter is not specified is zero. -<p><br>The higher this value, the more detail will be logged to the log files -about the activities of the client. At level 0, only critical errors -and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of information about -operations carried out. -<p><br>Levels above 1 will generate considerable amounts of log data, and -should only be used when investigating a problem. Levels above 3 are -designed for use only by developers and generate HUGE amounts of log -data, most of which is extremely cryptic. If debuglevel is set to the -letter 'A', then <em>all</em> debug messages will be printed. This setting -is for developers only (and people who <em>really</em> want to know how the -code works internally). -<p><br>Note that specifying this parameter here will override the <a href="smb.conf.5.html#loglevel"><strong>log -level</strong></a> parameter in the <a href="smb.conf.5.html"><strong>smb.conf -(5)</strong></a> file. -<p><br><a name="minusp"></a> -<li><strong><strong>-p port</strong></strong> This number is the TCP port number that will be used -when making connections to the server. The standard (well-known) TCP -port number for an SMB/CIFS server is 139, which is the default. -<p><br><a name="minusl"></a> -<li><strong><strong>-l logfilename</strong></strong> If specified, logfilename specifies a base -filename into which operational data from the running client will be -logged. -<p><br>The default base name is specified at compile time. -<p><br>The base name is used to generate actual log file names. For example, -if the name specified was "log", the debug file would be -<code>log.client</code>. -<p><br>The log file generated is never removed by the client. -<p><br><a name="minush"></a> -<li><strong><strong>-h</strong></strong> Print the usage message for the client. -<p><br><a name="minusI"></a> -<li><strong><strong>-I IP address</strong></strong> IP address is the address of the server to -connect to. It should be specified in standard "a.b.c.d" notation. -<p><br>Normally the client would attempt to locate a named SMB/CIFS server by -looking it up via the NetBIOS name resolution mechanism described -above in the <a href="rpcclient.1.html#minusR"><strong>name resolve order</strong></a> parameter -above. Using this parameter will force the client to assume that the -server is on the machine with the specified IP address and the NetBIOS -name component of the resource being connected to will be ignored. -<p><br>There is no default for this parameter. If not supplied, it will be -determined automatically by the client as described above. -<p><br><a name="minusE"></a> -<li><strong><strong>-E</strong></strong> This parameter causes the client to write messages to the -standard error stream (stderr) rather than to the standard output -stream. -<p><br>By default, the client writes messages to standard output - typically -the user's tty. -<p><br>Note that by default, debug information is always sent to stderr. -Debug information can instead be sent to a file, using the -<a href="rpcclient.1.html#minusl">-l log basename</a> option. -<p><br><a name="minusU"></a> -<li><strong><strong>-U username</strong></strong> This specifies the user name that will be used by -the client to make a connection, assuming your server is not a downlevel -server that is running a protocol level that uses passwords on shares, -not on usernames. -<p><br>Some servers are fussy about the case of this name, and some insist -that it must be a valid NetBIOS name. -<p><br>If no username is supplied, it will default to an uppercase version of -the environment variable <code>USER</code> or <code>LOGNAME</code> in that order. If no -username is supplied and neither environment variable exists the -username "GUEST" will be used. -<p><br>If the <code>USER</code> environment variable contains a '%' character, -everything after that will be treated as a password. This allows you -to set the environment variable to be <code>USER=username%password</code> so -that a password is not passed on the command line (where it may be -seen by the ps command). -<p><br>If the service you are connecting to requires a password, it can be -supplied using the <a href="rpcclient.1.html#minusU"><strong>-U</strong></a> option, by appending a percent symbol ("%") -then the password to username. For example, to attach to a service as -user <code>"fred"</code> with password <code>"secret"</code>, you would specify. <br> -<p><br><code>-U fred%secret</code> <br> -<p><br>on the command line. Note that there are no spaces around the percent -symbol. -<p><br>If you specify the password as part of username then the <a href="rpcclient.1.html#minusN"><strong>-N</strong></a> option -(suppress password prompt) is assumed. -<p><br>If you specify the password as a parameter <em>AND</em> as part of username -then the password as part of username will take precedence. Putting -nothing before or nothing after the percent symbol will cause an empty -username or an empty password to be used, respectively. -<p><br>The password may also be specified by setting up an environment -variable called <code>PASSWORD</code> that contains the users password. Note -that this may be very insecure on some systems but on others allows -users to script rpcclient commands without having a password appear in -the command line of a process listing. -<p><br>Note: Some servers (including OS/2 and Windows for Workgroups) insist -on an uppercase password. Lowercase or mixed case passwords may be -rejected by these servers. -<p><br>Be cautious about including passwords in scripts or in the -<code>PASSWORD</code> environment variable. Also, on many systems the command -line of a running process may be seen via the <code>ps</code> command to be -safe always allow rpcclient to prompt for a password and type it in -directly. -<p><br><a name="minust"></a> -<li><strong><strong>-t terminal code</strong></strong> This option tells rpcclient how to interpret -filenames coming from the remote server. Usually Asian language -multibyte UNIX implementations use different character sets than -SMB/CIFS servers (<em>EUC</em> instead of <em>SJIS</em> for example). Setting -this parameter will let rpcclient convert between the UNIX filenames -and the SMB filenames correctly. This option has not been seriously -tested and may have some problems. -<p><br>The terminal codes include <code>sjis</code>, <code>euc</code>, <code>jis7</code>, <code>jis8</code>, -<code>junet</code>, <code>hex</code>, <code>cap</code>. This is not a complete list, check the -Samba source code for the complete list. -<p><br><a name="minusm"></a> -<li><strong><strong>-m max protocol level</strong></strong> With the new code in Samba2.0, -<strong>rpcclient</strong> always attempts to connect at the maximum -protocols level the server supports. This parameter is -preserved for backwards compatibility, but any string -following the <strong>-m</strong> will be ignored. -<p><br><a name="minusW"></a> -<li><strong><strong>-W Domain</strong></strong> Override the default Domain, which is the remote server's -Domain. This option may be needed to connect to some servers. It is also -possible to specify the remote server name as the Domain, which will -force the username and password to be authenticated against the remote -server's local SAM instead of the Domain SAM. -<p><br><a name="minusc"></a> -<li><strong><strong>-c command string</strong></strong> command string is a semicolon separated -list of commands to be executed instead of prompting from stdin. -<a href="rpcclient.1.html#minusN"><strong>-N</strong></a> is implied by <strong>-c</strong>. -<p><br>This is particularly useful in scripts, e.g. <code>-c 'lsaquery; enumusers -u'</code>. -<p><br></ul> -<p><br><a name="OPERATIONS"></a> -<h2>OPERATIONS</h2> - -<p><br>Once the client is running, the user is presented with a prompt : -<p><br><code>smb:\></code> -<p><br>The prompt indicates that the client is ready and waiting to carry out -a user command. Each command is a single word, optionally followed by -parameters specific to that command. Command and parameters are -space-delimited unless these notes specifically state otherwise. All -commands are case-insensitive. Parameters to commands may or may not -be case sensitive, depending on the command. -<p><br>You can specify names (e.g registry keys; user or group names; -service names) which have spaces in them by quoting the -name with double quotes, for example "dRMON SmartAgent". -<p><br>Parameters shown in square brackets (e.g., "[parameter]") are -optional. If not given, the command will use suitable -defaults. Parameters shown in angle brackets (e.g., "<parameter>") are -required. -<p><br>Note that all commands operating on the server are actually performed -by issuing a request to the server. Thus the behavior may vary from -server to server, depending on how the server was implemented. -<p><br>The commands available are listed in groups relating to different services: -<p><br><ul> -<p><br><li><strong>Misccellaneous</strong> -<p><br><ul> -<p><br><a name="questionmark"></a> <li><strong><strong>? [command]</strong></strong> If "command" is specified, - the <strong>?</strong> command will display a brief informative message about the - specified command. If no command is specified, a list of available - commands will be displayed. -<p><br><a name="exclaimationmark"></a> <li><strong><strong>! [shell command]</strong></strong> If "shell command" - is specified, the <strong>!</strong> command will execute a shell locally and run - the specified shell command. If no command is specified, a local shell - will be run. -<p><br><a name="exit"></a> <li><strong><strong>exit</strong></strong> Terminate the connection with the server and - exit from the program. -<p><br><a name="help"></a> <li><strong><strong>help [command]</strong></strong> See the <a href="rpcclient.1.html#questionmark"><strong>?</strong></a> - command above. -<p><br><a name="quit"></a> <li><strong><strong>quit</strong></strong> See the <a href="rpcclient.1.html#exit"><strong>exit</strong></a> command. -<p><br></ul> -<p><br><li><strong>Event Log</strong> -<p><br><ul> -<p><br><a name="eventlog"></a> <li><strong><strong>eventlog</strong></strong> - list the events -<p><br></ul> -<p><br><li><strong>Service Control</strong> -<p><br>These commands provide functionality similar to the Windows - NT Service Control Manager. -<p><br>It is possible to use command-line completion (if you have - the GNU readline library) for Service names, by pressing the - tab key. -<p><br><ul> -<p><br><a name="svcenum"></a> <li><strong><strong>svcenum</strong></strong> - [-i] Lists Services. -<p><br><a name="svcinfo"></a> <li><strong><strong>svcinfo</strong></strong> - <service> Service Information -<p><br><a name="svcstart"></a> <li><strong><strong>svcstart</strong></strong> - <service> [arg 0] [arg 1] ... Start Service -<p><br><a name="svcstop"></a> <li><strong><strong>svcstop</strong></strong> - <service> Stop Service -<p><br></ul> -<p><br><li><strong>Scheduler</strong> -<p><br><ul> -<p><br><a name="at"></a> <li><strong><strong>at</strong></strong> - Scheduler control (at /? for syntax) -<p><br></ul> -<p><br><li><strong>Registry</strong> -<p><br>It is possible to use command-line completion (if you have - the GNU readline library) for registry key and value names, - by pressing the tab key. -<p><br><ul> -<p><br><a name="regenum"></a> <li><strong><strong>regenum</strong></strong> - <keyname> Registry Enumeration (keys, values) -<p><br><a name="regdeletekey"></a> <li><strong><strong>regdeletekey</strong></strong> - <keyname> Registry Key Delete -<p><br><a name="regcreatekey"></a> <li><strong><strong>regcreatekey</strong></strong> - <keyname> [keyclass] Registry Key Create -<p><br><a name="shutdown"></a> <li><strong><strong>shutdown</strong></strong> - [-m message] [-t timeout] [-r or --reboot] Server Shutdown -<p><br><a name="regqueryval"></a> <li><strong><strong>regqueryval</strong></strong> - <valname> Registry Value Query -<p><br><a name="regquerykey"></a> <li><strong><strong>regquerykey</strong></strong> - <keyname> Registry Key Query -<p><br><a name="regdeleteval"></a> <li><strong><strong>regdeleteval</strong></strong> - <valname> Registry Value Delete -<p><br><a name="regcreateval"></a> <li><strong><strong>regcreateval</strong></strong> - <valname> <valtype> <value> Registry Key Create -<p><br><a name="reggetsec"></a> <li><strong><strong>reggetsec</strong></strong> - <keyname> Registry Key Security -<p><br><a name="regtestsec"></a> <li><strong><strong>regtestsec</strong></strong> - <keyname> Test Registry Key Security -<p><br></ul> -<p><br><li><strong>Printing</strong> -<p><br>It is possible to use command-line completion (if you have - the GNU readline library) for Printer and job names, by - pressing the tab key. -<p><br><ul> -<p><br><a name="spoolenum"></a> <li><strong><strong>spoolenum</strong></strong> - Enumerate Printers. This experimental command lists - all printers available on a remote spooler service. -<p><br><a name="spooljobs"></a> <li><strong><strong>spooljobs</strong></strong> - <printer name> Enumerate Printer Jobs. This - experimental command lists all jobs, and their - status, currently queued on a remote spooler - service. -<p><br><a name="spoolopen"></a> <li><strong><strong>spoolopen</strong></strong> - <printer name> Spool Printer Open Test. Experimental. -<p><br></ul> -<p><br><li><strong>Server</strong> -<p><br><ul> -<p><br><a name="time"></a> <li><strong><strong>time</strong></strong> - Display remote time -<p><br><a name="brsinfo"></a> <li><strong><strong>brsinfo</strong></strong> - Browser Query Info -<p><br><a name="wksinfo"></a> <li><strong><strong>wksinfo</strong></strong> - Workstation Query Info -<p><br><a name="srvinfo"></a> <li><strong><strong>srvinfo</strong></strong> - Server Query Info -<p><br><a name="srvsessions"></a> <li><strong><strong>srvsessions</strong></strong> - List sessions on a server -<p><br><a name="srvshares"></a> <li><strong><strong>srvshares</strong></strong> - List shares on a server -<p><br><a name="srvtransports"></a> <li><strong><strong>srvtransports</strong></strong> - List transports on a server -<p><br><a name="srvconnections"></a> <li><strong><strong>srvconnections</strong></strong> - List connections on a server -<p><br><a name="srvfiles"></a> <li><strong><strong>srvfiles</strong></strong> - List files on a server -<p><br></ul> -<p><br><li><strong>Local Security Authority</strong> -<p><br><ul> -<p><br><a name="lsaquery"></a> <li><strong><strong>lsaquery</strong></strong> - Query Info Policy (domain member or server). Obtains - the SID and name of the SAM database that a server - is responsible for (i.e a workstation's local SAM - database or the PDC SAM database). Also obtains the - SID and name of the SAM database that a server is - a member of. -<p><br><a name="lsaenumdomains"></a> <li><strong><strong>lsaenumdomains</strong></strong> - Enumerate Trusted Domains. Lists all Trusted and - Trusting Domains with which the remote PDC has - trust relationships established. -<p><br><a name="lookupsids"></a> <li><strong><strong>lookupsids</strong></strong> - <rid1 or sid1> <rid1 or sid2> ... Resolve names from SIDs. - Mostly to be used by developers or for troubleshooting, - this command can take either Security Identifiers or Relative - Identifiers, and look them up in the local SAM database - (or look them up in a remote Trusting or Trusted PDC's SAM - database if there is an appropriate Trust Relationship - established). The result is a list of names, of the - format: <br> - <code>[TRUST_DOMAIN\]name</code>. <br> - the <a href="rpcclient.1.html#lsaquery"><strong>lsaquery</strong></a> command must have been - issued first if you wish to use lookupsids to resolve - RIDs. The only RIDs that will be resolved will be those - in the SAM database of the server to which you are connected. -<p><br><a name="lookupnames"></a> <li><strong><strong>lookupnames</strong></strong> - <name1> <name2> ... Resolve SIDs from names. - Mostly to be used by developers or for troubleshooting, - this command can take names of the following format: <br> - <code>[DOMAIN_NAME\]name</code>. <br> - The names, which can be user, group or alias names, will - either be looked up in the local SAM database or in a remote - Trusting or Trusted PDC's SAM database, if there is an - appropriate Trust Relationship established. The optional - Domain name component is the name of a SAM database, which - can include a workstation's local SAM database or a Trusted - Domain. - Example Usage: <br> - <code>lookupnames WKSTANAME\Administrator "Domain Guests"</code> <br> -<p><br><a name="querysecret"></a> <li><strong><strong>querysecret</strong></strong> - LSA Query Secret (developer use). This command only appears - to work against NT4 SP3 and below. Due to its potential - for misuse, it looks like Microsoft modified their - implementation of the LsaRetrievePrivateData call to - always return NT_STATUS_ACCESS_DENIED. -<p><br></ul> -<p><br><li><strong>NETLOGON</strong> -<p><br><ul> -<p><br><a name="ntlogin"></a> <li><strong><strong>ntlogin</strong></strong> - [username] [password] NT Domain login test. Demonstrates - how NT-style logins work. Mainly for developer usage, - it can also be used to verify that a user can log in - from a workstation. If you cannot ever get pam_ntdom - to work, try this command first. -<p><br><a name="domtrust"></a> <li><strong><strong>domtrust</strong></strong> - <domain> NT Inter-Domain test. Demonstrates how NT-style - Inter-Domain Trust relationships work. Mainly for - developer usage, it can also be used to verify that a - Trust Relationship is correctly established with a - remote PDC. -<p><br><a name="samsync"></a> <li><strong><strong>samsync</strong></strong> - SAM Synchronisation Test (experimental). This command - is used to manually synchronise a SAM database from a - remote PDC, when Samba is set up as a Backup Domain - Controller. -<p><br></ul> -<p><br><li><strong>SAM Database</strong> -<p><br>It is possible to use command-line completion (if you have - the GNU readline library) for user, group, alias and domain - names, by pressing the tab key. -<p><br><ul> -<p><br><a name="lookupdomain"></a> <li><strong><strong>lookupdomain</strong></strong> - Obtain SID for a local domain -<p><br><a name="enumusers"></a> <li><strong><strong>enumusers</strong></strong> - SAM User Database Query (experimental!) -<p><br><a name="addgroupmem"></a> <li><strong><strong>addgroupmem</strong></strong> - <group rid> [user] [user] ... SAM Add Domain Group Member -<p><br><a name="addaliasmem"></a> <li><strong><strong>addaliasmem</strong></strong> - <alias rid> [member sid1] [member sid2] ... SAM Add Domain Alias Member -<p><br><a name="delgroupmem"></a> <li><strong><strong>delgroupmem</strong></strong> - <group rid> [user] [user] ... SAM Delete Domain Group Member -<p><br><a name="delaliasmem"></a> <li><strong><strong>delaliasmem</strong></strong> - <alias rid> [member sid1] [member sid2] ... SAM Delete Domain Alias Member -<p><br><a name="creategroup"></a> <li><strong><strong>creategroup</strong></strong> - SAM Create Domain Group -<p><br><a name="createalias"></a> <li><strong><strong>createalias</strong></strong> - SAM Create Domain Alias -<p><br><a name="createuser"></a> <li><strong><strong>createuser</strong></strong> - <username> SAM Create Domain User -<p><br><a name="delgroup"></a> <li><strong><strong>delgroup</strong></strong> - SAM Delete Domain Group -<p><br><a name="delalias"></a> <li><strong><strong>delalias</strong></strong> - SAM Delete Domain Alias -<p><br><a name="ntpass"></a> <li><strong><strong>ntpass</strong></strong> - NT SAM Password Change -<p><br><a name="samuserset2"></a> <li><strong><strong>samuserset2</strong></strong> - <username> [-s acb_bits] SAM User Set Info 2 (experimental!) -<p><br><a name="samuserset"></a> <li><strong><strong>samuserset</strong></strong> - <username> [-p password] SAM User Set Info (experimental!) -<p><br><a name="samuser"></a> <li><strong><strong>samuser</strong></strong> - <username> SAM User Query (experimental!) -<p><br><a name="samgroup"></a> <li><strong><strong>samgroup</strong></strong> - <groupname> SAM Group Query (experimental!) -<p><br><a name="samalias"></a> <li><strong><strong>samalias</strong></strong> - <aliasname> SAM Alias Query -<p><br><a name="samaliasmem"></a> <li><strong><strong>samaliasmem</strong></strong> - <aliasname> SAM Alias Members -<p><br><a name="samgroupmem"></a> <li><strong><strong>samgroupmem</strong></strong> - SAM Group Members -<p><br><a name="samtest"></a> <li><strong><strong>samtest</strong></strong> - SAM User Encrypted RPC test (experimental!) -<p><br><a name="enumaliases"></a> <li><strong><strong>enumaliases</strong></strong> - SAM Aliases Database Query (experimental!) -<p><br><a name="enumdomains"></a> <li><strong><strong>enumdomains</strong></strong> - SAM Domains Database Query (experimental!) -<p><br><a name="enumgroups"></a> <li><strong><strong>enumgroups</strong></strong> - SAM Group Database Query (experimental!) -<p><br><a name="dominfo"></a> <li><strong><strong>dominfo</strong></strong> - SAM Query Domain Info -<p><br><a name="dispinfo"></a> <li><strong><strong>dispinfo</strong></strong> - SAM Query Display Info -<p><br></ul> -<p><br></ul> -<p><br><a name="NOTES"></a> -<h2>NOTES</h2> - -<p><br>Some servers are fussy about the case of supplied usernames, -passwords, share names (AKA service names) and machine names. If you -fail to connect try giving all parameters in uppercase. -<p><br>It is often necessary to use the <a href="rpcclient.1.html#minusn"><strong>-n</strong></a> option when connecting -to some types of servers. For example OS/2 LanManager insists on a valid -NetBIOS name being used, so you need to supply a valid name that would -be known to the server. -<p><br>rpcclient only works on servers that support MSRPC over SMB. This includes -all versions of Windows NT, including the ports to Unix such as AS/U and -AFPS. Support for MSRPC over SMB in other servers is currently rare and -patchy, for example Samba 2.0 only supports a limited set of MSRPC commands, -and some of those are not supported very well. -<p><br><a name="ENVIRONMENTVARIABLES"></a> -<h2>ENVIRONMENT VARIABLES</h2> - -<p><br>The variable <strong>USER</strong> may contain the username of the person using the -client. This information is used only if the protocol level is high -enough to support session-level passwords. -<p><br>The variable <strong>PASSWORD</strong> may contain the password of the person using -the client. This information is used only if the protocol level is -high enough to support session-level passwords. -<p><br><a name="INSTALLATION"></a> -<h2>INSTALLATION</h2> - -<p><br>The location of the client program is a matter for individual system -administrators. The following are thus suggestions only. -<p><br>It is recommended that the rpcclient software be installed in the -/usr/local/samba/bin or /usr/samba/bin directory, this directory -readable by all, writeable only by root. The client program itself -should be executable by all. The client should <em>NOT</em> be setuid or -setgid! -<p><br>The client log files should be put in a directory readable and -writeable only by the user. -<p><br>To test the client, you will need to know the name of a running -SMB/CIFS server. It is possible to run <a href="smbd.8.html"><strong>smbd (8)</strong></a> -an ordinary user - running that server as a daemon on a -user-accessible port (typically any port number over 1024) would -provide a suitable test server. -<p><br><a name="DIAGNOSTICS"></a> -<h2>DIAGNOSTICS</h2> - -<p><br>Most diagnostics issued by the client are logged in a specified log -file. The log file name is specified at compile time, but may be -overridden on the command line. -<p><br>The number and nature of diagnostics available depends on the debug -level used by the client. If you have problems, set the debug level to -3 and peruse the log files. -<p><br><a name="VERSION"></a> -<h2>VERSION</h2> - -<p><br>This man page is correct for version 2.0 of the Samba suite. -<p><br><a name="BUGS"></a> -<h2>BUGS</h2> - -<p><br><ul> -<li><strong>WARNING!</strong> -The MSPRC over SMB code has been developed from examining Network traces. -No documentation is available from the original creators (Microsoft) on -how MSRPC over SMB works, or how the individual MSRPC services work. -Microsoft's implementation of these services has been demonstrated (and -reported) to be... a bit flakey in places. -<p><br>The development of Samba's implementation of these services is <em>also</em> -a bit rough, and as more of the services are understood, it can even result -in versions of <a href="smbd.8.html"><strong>smbd (8)</strong></a> and rpcclient that are -incompatible for some commands or services. Additionally, the developers -are sending reports to Microsoft, and problems found by or reported to -Microsoft are fixed in Service Packs, which may also result in -incompatibilities. -<p><br>It is therefore not guaranteed that the execution of an rpcclient command will -work. It is also not guaranteed that the target server will continue to -operate, i.e the execution of an MSRPC command may cause a remote service to -fail, or even cause the remote server to fail. Usual rules apply, of course: -the developers bear absolutely no responsibility for the use, misuse, or -lack of use of rpcclient, by any person or persons, whether legal, -illegal, accidental, deliberate, intentional, malicious, curious, etc. -<p><br><li><strong>Command Completion</strong> -Command-completion (available if you have the GNU readline library) used on -certain commands may not operate correctly if the word being completed (such as a registry key) contains a space. Typically, the name will be completed, but -you will have to go back and put quotes round it, yourself. -<p><br><li><strong>SAM Database command-completion</strong> -Command-completion (available if you have the GNU readline library) of user, -group and alias names does not work on remote Domains, which would normally -be specified like this: <br> -<code>DOMAIN_name\user_name</code>. <br> -The only names that can be completed in this fashion are the local names -in the SAM database of the target server. -<p><br><li><strong><a href="rpcclient.1.html#spoolenum"><strong>spoolenum</strong></a></strong> -Due to current limitations in the rpcclient MSRPC / SMB code, and due to -the extremely poor MSRPC implementation (by Microsoft) of the spooler -service, if there are a large number of printers (or the names / comment -fields associated with the printers), this command will fail. The -limitations require further research to be carried out; we're stuck with -the poor \PIPE\spoolss design. -<p><br></ul> -<p><br><a name="AUTHOR"></a> -<h2>AUTHOR</h2> - -<p><br>The original Samba software and related utilities were created by -Andrew Tridgell <a href="mailto:samba-bugs@samba.org"><em>samba-bugs@samba.org</em></a>. Samba is now developed -by the Samba Team as an Open Source project similar to the way the -Linux kernel is developed. -<p><br>The original Samba man pages were written by Karl Auer. The man page -sources were converted to YODL format (another excellent piece of Open -Source software, available at -<a href="ftp://ftp.icce.rug.nl/pub/unix/"><strong>ftp://ftp.icce.rug.nl/pub/unix/</strong></a>) -and updated for the Samba2.0 release by Jeremy Allison. This man page -was developed cut-and-paste style from the smbclient man page, by -Luke Kenneth Casson Leighton. -<a href="mailto:samba-bugs@samba.org"><em>samba-bugs@samba.org</em></a>. -<p><br>See <a href="samba.7.html"><strong>samba (7)</strong></a> to find out how to get a full -list of contributors and details on how to submit bug reports, -comments etc. -<p><br></body> -</html> diff --git a/docs/manpages/debug2html.1 b/docs/manpages/debug2html.1 deleted file mode 100644 index a1071cfd88..0000000000 --- a/docs/manpages/debug2html.1 +++ /dev/null @@ -1,54 +0,0 @@ -.TH "debug2html" "1" "29 Dec 1998" "Samba" "SAMBA" -.PP -.SH "NAME" -debug2html \- Samba DEBUG to HTML translation filter -.PP -.SH "SYNOPSIS" -.PP -debug2html [input-file [output-file]] -.PP -.SH "DESCRIPTION" -.PP -This program is part of the \fBSamba\fP suite\&. -.PP -\fBdebug2html\fP generates HTML files from Samba log files\&. Log files -produced by \fBnmbd\fP(8) or \fBsmbd\fP(8) may then be viewed by a web -browser\&. The output conforms to the HTML 3\&.2 specification\&. -.PP -The filenames specified on the command line are optional\&. If the -output-file is ommitted, output will go to \fBstdout\fP\&. If the input-file -is ommitted, \fBdebug2html\fP will read from \fBstdin\fP\&. The filename "-" -can be used to indicate that input should be read from \fBstdin\fP\&. For -example: -.PP -\f(CWcat /usr/local/samba/var/log\&.nmb | debug2html - nmblog\&.html\fP -.br -.PP -.SH "VERSION" -.PP -This man page is correct for version 2\&.0 of the Samba suite\&. -.PP -.SH "SEE ALSO" -.PP -\fBnmbd\fP(8), \fBsmbd\fP(8), -\fBsamba\fP(7)\&. -.PP -.SH "AUTHOR" -.PP -The original Samba software and related utilities were created by -Andrew Tridgell \fIsamba-bugs@samba\&.org\fP\&. Samba is now developed -by the Samba Team as an Open Source project similar to the way the -Linux kernel is developed\&. -.PP -The original Samba man pages were written by Karl Auer\&. The man page -sources were converted to YODL format (another excellent piece of Open -Source software, available at -\fBftp://ftp\&.icce\&.rug\&.nl/pub/unix/\fP) -and updated for the Samba2\&.0 release by Jeremy Allison\&. -\fIsamba-bugs@samba\&.org\fP\&. -.PP -\fBdebug2html\fP was added by Chris Hertel\&. -.PP -See \fBsamba\fP(7) to find out how to get a full -list of contributors and details on how to submit bug reports, -comments etc\&. diff --git a/docs/manpages/rpcclient.1 b/docs/manpages/rpcclient.1 deleted file mode 100644 index 65517c84fb..0000000000 --- a/docs/manpages/rpcclient.1 +++ /dev/null @@ -1,809 +0,0 @@ -.TH "rpcclient " "1" "23 Oct 1998" "Samba" "SAMBA" -.PP -.SH "NAME" -rpcclient \- utility to manage MSRPC resources on servers -.PP -.SH "SYNOPSIS" -.PP -\fBrpcclient\fP -[password] --S servername -[-U [username][%][password]] -[-W domain] -[-l log basename] -[-d debuglevel] -[-O socket options] -[-i scope] -[-N] -[-n NetBIOS name] -[-h] -[-I dest IP] -[-E] -[-t terminal code] -[-c command string] -[-B IP addr] -[-s smb\&.conf] -[-m max protocol] -.PP -.SH "DESCRIPTION" -.PP -This program is part of the \fBSamba\fP suite\&. -.PP -\fBrpcclient\fP is a client that can \'talk\' to an SMB/CIFS MSRPC server\&. -Operations include things like managing a SAM Database (users, groups -and aliases) in the same way as the Windows NT programs -\fBUser Manager for Domains\fP and \fBServer Manager for Domains\fP; -managing a remote registry in the same way as the Windows NT programs -\fBREGEDT32\&.EXE\fP and \fBREGEDIT\&.EXE\fP; viewing a remote event log (same -as \fBEVENTVWR\&.EXE\fP) etc\&. -.PP -Typical usage is like this: -.br -\f(CWrpcclient -I 192\&.168\&.32\&.1 -S "*SMBSERVER" -U fred%secret -l log\fP -.br -.PP -.SH "OPTIONS" -.PP -.IP -.IP "\fBservername\fP" -servername is the name of the server you want -to use on the server\&. This should be the NetBIOS name of the SMB/CIFS -server, which can be \fB*SMBSERVER\fP on Windows NT 4\&.0 or Samba Servers\&. -.IP -Note that the server name required is NOT necessarily the IP (DNS) -host name of the server! The name required is a NetBIOS server name, -which may or may not be the same as the IP hostname of the machine -running the server\&. Also, remember that having a period in a NetBIOS -name (such as an IP hostname) may cause connectivity problems on your -network: NT tends to strip NetBIOS names from the leading period -onwards\&. -.IP -The server name is looked up according to either the -\fB-R\fP parameter to \fBrpcclient\fP or using the -\fBname resolve order\fP -parameter in the smb\&.conf file, allowing an administrator to change -the order and methods by which server names are looked up\&. -.IP -.IP "\fBpassword\fP" -password is the password required to access the -specified service on the specified server\&. If this parameter is -supplied, the \fB-N\fP option (suppress password prompt) is assumed\&. -.IP -There is no default password\&. If no password is supplied on the -command line (either by using this parameter or adding a password to -the \fB-U\fP option (see below)) and the \fB-N\fP option is not specified, -the client will prompt for a password, even if the desired service -does not require one\&. (If no password is required, simply press ENTER -to provide a null password\&.) -.IP -Note: Some servers (including OS/2 and Windows for Workgroups) insist -on an uppercase password\&. Lowercase or mixed case passwords may be -rejected by these servers\&. -.IP -Be cautious about including passwords in scripts\&. -.IP -.IP "\fB-s smb\&.conf\fP" -This parameter specifies the pathname to the -Samba configuration file, smb\&.conf\&. This file controls all aspects of -the Samba setup on the machine and rpcclient also needs to read this -file\&. -.IP -.IP "\fB-B IP addr\fP" -The IP address to use when sending a broadcast packet\&. -.IP -.IP "\fB-O socket options\fP" -TCP socket options to set on the client -socket\&. See the socket options -parameter in the \fBsmb\&.conf (5)\fP manpage for -the list of valid options\&. -.IP -.IP "\fB-R name resolve order\fP" -This option allows the user of -rpcclient to determine what name resolution services to use when -looking up the NetBIOS name of the host being connected to\&. -.IP -The options are :"lmhosts", "host", "wins" and "bcast"\&. They cause -names to be resolved as follows : -.IP -.IP -.IP o -\fBlmhosts\fP : Lookup an IP address in the Samba lmhosts file\&. -The lmhosts file is stored in the same directory as the -\fBsmb\&.conf\fP file\&. -.IP -.IP o -\fBhost\fP : Do a standard host name to IP address resolution, -using the system /etc/hosts, NIS, or DNS lookups\&. This method of name -resolution is operating system depended for instance on IRIX or -Solaris this may be controlled by the \fI/etc/nsswitch\&.conf\fP file)\&. -.IP -.IP o -\fBwins\fP : Query a name with the IP address listed in the \fBwins -server\fP parameter in the smb\&.conf file\&. If -no WINS server has been specified this method will be ignored\&. -.IP -.IP o -\fBbcast\fP : Do a broadcast on each of the known local interfaces -listed in the \fBinterfaces\fP parameter -in the smb\&.conf file\&. This is the least reliable of the name resolution -methods as it depends on the target host being on a locally connected -subnet\&. To specify a particular broadcast address the \fB-B\fP option -may be used\&. -.IP -.IP -If this parameter is not set then the name resolve order defined -in the \fBsmb\&.conf\fP file parameter -(\fBname resolve order\fP) -will be used\&. -.IP -The default order is lmhosts, host, wins, bcast and without this -parameter or any entry in the \fB"name resolve -order"\fP parameter of the -\fBsmb\&.conf\fP file the name resolution methods -will be attempted in this order\&. -.IP -.IP "\fB-i scope\fP" -This specifies a NetBIOS scope that rpcclient will use -to communicate with when generating NetBIOS names\&. For details on the -use of NetBIOS scopes, see rfc1001\&.txt and rfc1002\&.txt\&. NetBIOS scopes -are \fIvery\fP rarely used, only set this parameter if you are the -system administrator in charge of all the NetBIOS systems you -communicate with\&. -.IP -.IP "\fB-N\fP" -If specified, this parameter suppresses the normal -password prompt from the client to the user\&. This is useful when -accessing a service that does not require a password\&. -.IP -Unless a password is specified on the command line or this parameter -is specified, the client will request a password\&. -.IP -.IP "\fB-n NetBIOS name\fP" -By default, the client will use the local -machine\'s hostname (in uppercase) as its NetBIOS name\&. This parameter -allows you to override the host name and use whatever NetBIOS name you -wish\&. -.IP -.IP "\fB-d debuglevel\fP" -debuglevel is an integer from 0 to 10, or the -letter \'A\'\&. -.IP -The default value if this parameter is not specified is zero\&. -.IP -The higher this value, the more detail will be logged to the log files -about the activities of the client\&. At level 0, only critical errors -and serious warnings will be logged\&. Level 1 is a reasonable level for -day to day running - it generates a small amount of information about -operations carried out\&. -.IP -Levels above 1 will generate considerable amounts of log data, and -should only be used when investigating a problem\&. Levels above 3 are -designed for use only by developers and generate HUGE amounts of log -data, most of which is extremely cryptic\&. If debuglevel is set to the -letter \'A\', then \fIall\fP debug messages will be printed\&. This setting -is for developers only (and people who \fIreally\fP want to know how the -code works internally)\&. -.IP -Note that specifying this parameter here will override the \fBlog -level\fP parameter in the \fBsmb\&.conf -(5)\fP file\&. -.IP -.IP "\fB-p port\fP" -This number is the TCP port number that will be used -when making connections to the server\&. The standard (well-known) TCP -port number for an SMB/CIFS server is 139, which is the default\&. -.IP -.IP "\fB-l logfilename\fP" -If specified, logfilename specifies a base -filename into which operational data from the running client will be -logged\&. -.IP -The default base name is specified at compile time\&. -.IP -The base name is used to generate actual log file names\&. For example, -if the name specified was "log", the debug file would be -\f(CWlog\&.client\fP\&. -.IP -The log file generated is never removed by the client\&. -.IP -.IP "\fB-h\fP" -Print the usage message for the client\&. -.IP -.IP "\fB-I IP address\fP" -IP address is the address of the server to -connect to\&. It should be specified in standard "a\&.b\&.c\&.d" notation\&. -.IP -Normally the client would attempt to locate a named SMB/CIFS server by -looking it up via the NetBIOS name resolution mechanism described -above in the \fBname resolve order\fP parameter -above\&. Using this parameter will force the client to assume that the -server is on the machine with the specified IP address and the NetBIOS -name component of the resource being connected to will be ignored\&. -.IP -There is no default for this parameter\&. If not supplied, it will be -determined automatically by the client as described above\&. -.IP -.IP "\fB-E\fP" -This parameter causes the client to write messages to the -standard error stream (stderr) rather than to the standard output -stream\&. -.IP -By default, the client writes messages to standard output - typically -the user\'s tty\&. -.IP -Note that by default, debug information is always sent to stderr\&. -Debug information can instead be sent to a file, using the --l log basename option\&. -.IP -.IP "\fB-U username\fP" -This specifies the user name that will be used by -the client to make a connection, assuming your server is not a downlevel -server that is running a protocol level that uses passwords on shares, -not on usernames\&. -.IP -Some servers are fussy about the case of this name, and some insist -that it must be a valid NetBIOS name\&. -.IP -If no username is supplied, it will default to an uppercase version of -the environment variable \f(CWUSER\fP or \f(CWLOGNAME\fP in that order\&. If no -username is supplied and neither environment variable exists the -username "GUEST" will be used\&. -.IP -If the \f(CWUSER\fP environment variable contains a \'%\' character, -everything after that will be treated as a password\&. This allows you -to set the environment variable to be \f(CWUSER=username%password\fP so -that a password is not passed on the command line (where it may be -seen by the ps command)\&. -.IP -If the service you are connecting to requires a password, it can be -supplied using the \fB-U\fP option, by appending a percent symbol ("%") -then the password to username\&. For example, to attach to a service as -user \f(CW"fred"\fP with password \f(CW"secret"\fP, you would specify\&. -.br -.IP -\f(CW-U fred%secret\fP -.br -.IP -on the command line\&. Note that there are no spaces around the percent -symbol\&. -.IP -If you specify the password as part of username then the \fB-N\fP option -(suppress password prompt) is assumed\&. -.IP -If you specify the password as a parameter \fIAND\fP as part of username -then the password as part of username will take precedence\&. Putting -nothing before or nothing after the percent symbol will cause an empty -username or an empty password to be used, respectively\&. -.IP -The password may also be specified by setting up an environment -variable called \f(CWPASSWORD\fP that contains the users password\&. Note -that this may be very insecure on some systems but on others allows -users to script rpcclient commands without having a password appear in -the command line of a process listing\&. -.IP -Note: Some servers (including OS/2 and Windows for Workgroups) insist -on an uppercase password\&. Lowercase or mixed case passwords may be -rejected by these servers\&. -.IP -Be cautious about including passwords in scripts or in the -\f(CWPASSWORD\fP environment variable\&. Also, on many systems the command -line of a running process may be seen via the \f(CWps\fP command to be -safe always allow rpcclient to prompt for a password and type it in -directly\&. -.IP -.IP "\fB-t terminal code\fP" -This option tells rpcclient how to interpret -filenames coming from the remote server\&. Usually Asian language -multibyte UNIX implementations use different character sets than -SMB/CIFS servers (\fIEUC\fP instead of \fISJIS\fP for example)\&. Setting -this parameter will let rpcclient convert between the UNIX filenames -and the SMB filenames correctly\&. This option has not been seriously -tested and may have some problems\&. -.IP -The terminal codes include \f(CWsjis\fP, \f(CWeuc\fP, \f(CWjis7\fP, \f(CWjis8\fP, -\f(CWjunet\fP, \f(CWhex\fP, \f(CWcap\fP\&. This is not a complete list, check the -Samba source code for the complete list\&. -.IP -.IP "\fB-m max protocol level\fP" -With the new code in Samba2\&.0, -\fBrpcclient\fP always attempts to connect at the maximum -protocols level the server supports\&. This parameter is -preserved for backwards compatibility, but any string -following the \fB-m\fP will be ignored\&. -.IP -.IP "\fB-W Domain\fP" -Override the default Domain, which is the remote server\'s -Domain\&. This option may be needed to connect to some servers\&. It is also -possible to specify the remote server name as the Domain, which will -force the username and password to be authenticated against the remote -server\'s local SAM instead of the Domain SAM\&. -.IP -.IP "\fB-c command string\fP" -command string is a semicolon separated -list of commands to be executed instead of prompting from stdin\&. -\fB-N\fP is implied by \fB-c\fP\&. -.IP -This is particularly useful in scripts, e\&.g\&. \f(CW-c \'lsaquery; enumusers -u\'\fP\&. -.IP -.PP -.SH "OPERATIONS" -.PP -Once the client is running, the user is presented with a prompt : -.PP -\f(CWsmb:\e>\fP -.PP -The prompt indicates that the client is ready and waiting to carry out -a user command\&. Each command is a single word, optionally followed by -parameters specific to that command\&. Command and parameters are -space-delimited unless these notes specifically state otherwise\&. All -commands are case-insensitive\&. Parameters to commands may or may not -be case sensitive, depending on the command\&. -.PP -You can specify names (e\&.g registry keys; user or group names; -service names) which have spaces in them by quoting the -name with double quotes, for example "dRMON SmartAgent"\&. -.PP -Parameters shown in square brackets (e\&.g\&., "[parameter]") are -optional\&. If not given, the command will use suitable -defaults\&. Parameters shown in angle brackets (e\&.g\&., "<parameter>") are -required\&. -.PP -Note that all commands operating on the server are actually performed -by issuing a request to the server\&. Thus the behavior may vary from -server to server, depending on how the server was implemented\&. -.PP -The commands available are listed in groups relating to different services: -.PP -.IP -.IP "Misccellaneous" -.IP -.IP -.IP "\fB? [command]\fP" -If "command" is specified, -the \fB?\fP command will display a brief informative message about the -specified command\&. If no command is specified, a list of available -commands will be displayed\&. -.IP -.IP "\fB! [shell command]\fP" -If "shell command" -is specified, the \fB!\fP command will execute a shell locally and run -the specified shell command\&. If no command is specified, a local shell -will be run\&. -.IP -.IP "\fBexit\fP" -Terminate the connection with the server and -exit from the program\&. -.IP -.IP "\fBhelp [command]\fP" -See the \fB?\fP -command above\&. -.IP -.IP "\fBquit\fP" -See the \fBexit\fP command\&. -.IP -.IP -.IP "Event Log" -.IP -.IP -.IP "\fBeventlog\fP" -list the events -.IP -.IP -.IP "Service Control" -.IP -These commands provide functionality similar to the Windows -NT Service Control Manager\&. -.IP -It is possible to use command-line completion (if you have -the GNU readline library) for Service names, by pressing the -tab key\&. -.IP -.IP -.IP "\fBsvcenum\fP" -[-i] Lists Services\&. -.IP -.IP "\fBsvcinfo\fP" -<service> Service Information -.IP -.IP "\fBsvcstart\fP" -<service> [arg 0] [arg 1] \&.\&.\&. Start Service -.IP -.IP "\fBsvcstop\fP" -<service> Stop Service -.IP -.IP -.IP "Scheduler" -.IP -.IP -.IP "\fBat\fP" -Scheduler control (at /? for syntax) -.IP -.IP -.IP "Registry" -.IP -It is possible to use command-line completion (if you have -the GNU readline library) for registry key and value names, -by pressing the tab key\&. -.IP -.IP -.IP "\fBregenum\fP" -<keyname> Registry Enumeration (keys, values) -.IP -.IP "\fBregdeletekey\fP" -<keyname> Registry Key Delete -.IP -.IP "\fBregcreatekey\fP" -<keyname> [keyclass] Registry Key Create -.IP -.IP "\fBshutdown\fP" -[-m message] [-t timeout] [-r or --reboot] Server Shutdown -.IP -.IP "\fBregqueryval\fP" -<valname> Registry Value Query -.IP -.IP "\fBregquerykey\fP" -<keyname> Registry Key Query -.IP -.IP "\fBregdeleteval\fP" -<valname> Registry Value Delete -.IP -.IP "\fBregcreateval\fP" -<valname> <valtype> <value> Registry Key Create -.IP -.IP "\fBreggetsec\fP" -<keyname> Registry Key Security -.IP -.IP "\fBregtestsec\fP" -<keyname> Test Registry Key Security -.IP -.IP -.IP "Printing" -.IP -It is possible to use command-line completion (if you have -the GNU readline library) for Printer and job names, by -pressing the tab key\&. -.IP -.IP -.IP "\fBspoolenum\fP" -Enumerate Printers\&. This experimental command lists -all printers available on a remote spooler service\&. -.IP -.IP "\fBspooljobs\fP" -<printer name> Enumerate Printer Jobs\&. This -experimental command lists all jobs, and their -status, currently queued on a remote spooler -service\&. -.IP -.IP "\fBspoolopen\fP" -<printer name> Spool Printer Open Test\&. Experimental\&. -.IP -.IP -.IP "Server" -.IP -.IP -.IP "\fBtime\fP" -Display remote time -.IP -.IP "\fBbrsinfo\fP" -Browser Query Info -.IP -.IP "\fBwksinfo\fP" -Workstation Query Info -.IP -.IP "\fBsrvinfo\fP" -Server Query Info -.IP -.IP "\fBsrvsessions\fP" -List sessions on a server -.IP -.IP "\fBsrvshares\fP" -List shares on a server -.IP -.IP "\fBsrvtransports\fP" -List transports on a server -.IP -.IP "\fBsrvconnections\fP" -List connections on a server -.IP -.IP "\fBsrvfiles\fP" -List files on a server -.IP -.IP -.IP "Local Security Authority" -.IP -.IP -.IP "\fBlsaquery\fP" -Query Info Policy (domain member or server)\&. Obtains -the SID and name of the SAM database that a server -is responsible for (i\&.e a workstation\'s local SAM -database or the PDC SAM database)\&. Also obtains the -SID and name of the SAM database that a server is -a member of\&. -.IP -.IP "\fBlsaenumdomains\fP" -Enumerate Trusted Domains\&. Lists all Trusted and -Trusting Domains with which the remote PDC has -trust relationships established\&. -.IP -.IP "\fBlookupsids\fP" -<rid1 or sid1> <rid1 or sid2> \&.\&.\&. Resolve names from SIDs\&. -Mostly to be used by developers or for troubleshooting, -this command can take either Security Identifiers or Relative -Identifiers, and look them up in the local SAM database -(or look them up in a remote Trusting or Trusted PDC\'s SAM -database if there is an appropriate Trust Relationship -established)\&. The result is a list of names, of the -format: -.br -\f(CW[TRUST_DOMAIN\e]name\fP\&. -.br -the \fBlsaquery\fP command must have been -issued first if you wish to use lookupsids to resolve -RIDs\&. The only RIDs that will be resolved will be those -in the SAM database of the server to which you are connected\&. -.IP -.IP "\fBlookupnames\fP" -<name1> <name2> \&.\&.\&. Resolve SIDs from names\&. -Mostly to be used by developers or for troubleshooting, -this command can take names of the following format: -.br -\f(CW[DOMAIN_NAME\e]name\fP\&. -.br -The names, which can be user, group or alias names, will -either be looked up in the local SAM database or in a remote -Trusting or Trusted PDC\'s SAM database, if there is an -appropriate Trust Relationship established\&. The optional -Domain name component is the name of a SAM database, which -can include a workstation\'s local SAM database or a Trusted -Domain\&. -Example Usage: -.br -\f(CWlookupnames WKSTANAME\eAdministrator "Domain Guests"\fP -.br -.IP -.IP "\fBquerysecret\fP" -LSA Query Secret (developer use)\&. This command only appears -to work against NT4 SP3 and below\&. Due to its potential -for misuse, it looks like Microsoft modified their -implementation of the LsaRetrievePrivateData call to -always return NT_STATUS_ACCESS_DENIED\&. -.IP -.IP -.IP "NETLOGON" -.IP -.IP -.IP "\fBntlogin\fP" -[username] [password] NT Domain login test\&. Demonstrates -how NT-style logins work\&. Mainly for developer usage, -it can also be used to verify that a user can log in -from a workstation\&. If you cannot ever get pam_ntdom -to work, try this command first\&. -.IP -.IP "\fBdomtrust\fP" -<domain> NT Inter-Domain test\&. Demonstrates how NT-style -Inter-Domain Trust relationships work\&. Mainly for -developer usage, it can also be used to verify that a -Trust Relationship is correctly established with a -remote PDC\&. -.IP -.IP "\fBsamsync\fP" -SAM Synchronisation Test (experimental)\&. This command -is used to manually synchronise a SAM database from a -remote PDC, when Samba is set up as a Backup Domain -Controller\&. -.IP -.IP -.IP "SAM Database" -.IP -It is possible to use command-line completion (if you have -the GNU readline library) for user, group, alias and domain -names, by pressing the tab key\&. -.IP -.IP -.IP "\fBlookupdomain\fP" -Obtain SID for a local domain -.IP -.IP "\fBenumusers\fP" -SAM User Database Query (experimental!) -.IP -.IP "\fBaddgroupmem\fP" -<group rid> [user] [user] \&.\&.\&. SAM Add Domain Group Member -.IP -.IP "\fBaddaliasmem\fP" -<alias rid> [member sid1] [member sid2] \&.\&.\&. SAM Add Domain Alias Member -.IP -.IP "\fBdelgroupmem\fP" -<group rid> [user] [user] \&.\&.\&. SAM Delete Domain Group Member -.IP -.IP "\fBdelaliasmem\fP" -<alias rid> [member sid1] [member sid2] \&.\&.\&. SAM Delete Domain Alias Member -.IP -.IP "\fBcreategroup\fP" -SAM Create Domain Group -.IP -.IP "\fBcreatealias\fP" -SAM Create Domain Alias -.IP -.IP "\fBcreateuser\fP" -<username> SAM Create Domain User -.IP -.IP "\fBdelgroup\fP" -SAM Delete Domain Group -.IP -.IP "\fBdelalias\fP" -SAM Delete Domain Alias -.IP -.IP "\fBntpass\fP" -NT SAM Password Change -.IP -.IP "\fBsamuserset2\fP" -<username> [-s acb_bits] SAM User Set Info 2 (experimental!) -.IP -.IP "\fBsamuserset\fP" -<username> [-p password] SAM User Set Info (experimental!) -.IP -.IP "\fBsamuser\fP" -<username> SAM User Query (experimental!) -.IP -.IP "\fBsamgroup\fP" -<groupname> SAM Group Query (experimental!) -.IP -.IP "\fBsamalias\fP" -<aliasname> SAM Alias Query -.IP -.IP "\fBsamaliasmem\fP" -<aliasname> SAM Alias Members -.IP -.IP "\fBsamgroupmem\fP" -SAM Group Members -.IP -.IP "\fBsamtest\fP" -SAM User Encrypted RPC test (experimental!) -.IP -.IP "\fBenumaliases\fP" -SAM Aliases Database Query (experimental!) -.IP -.IP "\fBenumdomains\fP" -SAM Domains Database Query (experimental!) -.IP -.IP "\fBenumgroups\fP" -SAM Group Database Query (experimental!) -.IP -.IP "\fBdominfo\fP" -SAM Query Domain Info -.IP -.IP "\fBdispinfo\fP" -SAM Query Display Info -.IP -.IP -.PP -.SH "NOTES" -.PP -Some servers are fussy about the case of supplied usernames, -passwords, share names (AKA service names) and machine names\&. If you -fail to connect try giving all parameters in uppercase\&. -.PP -It is often necessary to use the \fB-n\fP option when connecting -to some types of servers\&. For example OS/2 LanManager insists on a valid -NetBIOS name being used, so you need to supply a valid name that would -be known to the server\&. -.PP -rpcclient only works on servers that support MSRPC over SMB\&. This includes -all versions of Windows NT, including the ports to Unix such as AS/U and -AFPS\&. Support for MSRPC over SMB in other servers is currently rare and -patchy, for example Samba 2\&.0 only supports a limited set of MSRPC commands, -and some of those are not supported very well\&. -.PP -.SH "ENVIRONMENT VARIABLES" -.PP -The variable \fBUSER\fP may contain the username of the person using the -client\&. This information is used only if the protocol level is high -enough to support session-level passwords\&. -.PP -The variable \fBPASSWORD\fP may contain the password of the person using -the client\&. This information is used only if the protocol level is -high enough to support session-level passwords\&. -.PP -.SH "INSTALLATION" -.PP -The location of the client program is a matter for individual system -administrators\&. The following are thus suggestions only\&. -.PP -It is recommended that the rpcclient software be installed in the -/usr/local/samba/bin or /usr/samba/bin directory, this directory -readable by all, writeable only by root\&. The client program itself -should be executable by all\&. The client should \fINOT\fP be setuid or -setgid! -.PP -The client log files should be put in a directory readable and -writeable only by the user\&. -.PP -To test the client, you will need to know the name of a running -SMB/CIFS server\&. It is possible to run \fBsmbd (8)\fP -an ordinary user - running that server as a daemon on a -user-accessible port (typically any port number over 1024) would -provide a suitable test server\&. -.PP -.SH "DIAGNOSTICS" -.PP -Most diagnostics issued by the client are logged in a specified log -file\&. The log file name is specified at compile time, but may be -overridden on the command line\&. -.PP -The number and nature of diagnostics available depends on the debug -level used by the client\&. If you have problems, set the debug level to -3 and peruse the log files\&. -.PP -.SH "VERSION" -.PP -This man page is correct for version 2\&.0 of the Samba suite\&. -.PP -.SH "BUGS" -.PP -.IP "WARNING!" -The MSPRC over SMB code has been developed from examining Network traces\&. -No documentation is available from the original creators (Microsoft) on -how MSRPC over SMB works, or how the individual MSRPC services work\&. -Microsoft\'s implementation of these services has been demonstrated (and -reported) to be\&.\&.\&. a bit flakey in places\&. -.IP -The development of Samba\'s implementation of these services is \fIalso\fP -a bit rough, and as more of the services are understood, it can even result -in versions of \fBsmbd (8)\fP and rpcclient that are -incompatible for some commands or services\&. Additionally, the developers -are sending reports to Microsoft, and problems found by or reported to -Microsoft are fixed in Service Packs, which may also result in -incompatibilities\&. -.IP -It is therefore not guaranteed that the execution of an rpcclient command will -work\&. It is also not guaranteed that the target server will continue to -operate, i\&.e the execution of an MSRPC command may cause a remote service to -fail, or even cause the remote server to fail\&. Usual rules apply, of course: -the developers bear absolutely no responsibility for the use, misuse, or -lack of use of rpcclient, by any person or persons, whether legal, -illegal, accidental, deliberate, intentional, malicious, curious, etc\&. -.IP -.IP "Command Completion" -Command-completion (available if you have the GNU readline library) used on -certain commands may not operate correctly if the word being completed (such as a registry key) contains a space\&. Typically, the name will be completed, but -you will have to go back and put quotes round it, yourself\&. -.IP -.IP "SAM Database command-completion" -Command-completion (available if you have the GNU readline library) of user, -group and alias names does not work on remote Domains, which would normally -be specified like this: -.br -\f(CWDOMAIN_name\euser_name\fP\&. -.br -The only names that can be completed in this fashion are the local names -in the SAM database of the target server\&. -.IP -.IP "\fBspoolenum\fP" -Due to current limitations in the rpcclient MSRPC / SMB code, and due to -the extremely poor MSRPC implementation (by Microsoft) of the spooler -service, if there are a large number of printers (or the names / comment -fields associated with the printers), this command will fail\&. The -limitations require further research to be carried out; we\'re stuck with -the poor \ePIPE\espoolss design\&. -.IP -.PP -.SH "AUTHOR" -.PP -The original Samba software and related utilities were created by -Andrew Tridgell \fIsamba-bugs@samba\&.org\fP\&. Samba is now developed -by the Samba Team as an Open Source project similar to the way the -Linux kernel is developed\&. -.PP -The original Samba man pages were written by Karl Auer\&. The man page -sources were converted to YODL format (another excellent piece of Open -Source software, available at -\fBftp://ftp\&.icce\&.rug\&.nl/pub/unix/\fP) -and updated for the Samba2\&.0 release by Jeremy Allison\&. This man page -was developed cut-and-paste style from the smbclient man page, by -Luke Kenneth Casson Leighton\&. -\fIsamba-bugs@samba\&.org\fP\&. -.PP -See \fBsamba (7)\fP to find out how to get a full -list of contributors and details on how to submit bug reports, -comments etc\&. -.PP diff --git a/docs/textdocs/LDAP.txt b/docs/textdocs/LDAP.txt deleted file mode 100644 index 9c419b00f3..0000000000 --- a/docs/textdocs/LDAP.txt +++ /dev/null @@ -1,150 +0,0 @@ - -TITLE INFORMATION: LDAP Support in Samba -AUTHOR INFORMATION: Matthew Chapman -DATE INFORMATION: 29th November 1998 - -WARNING: This is experimental code. Use at your own risk, and please report -any bugs (after reading BUGS.txt). - -Contents - -1: What is LDAP? -2: Why LDAP and Samba? -3: Using LDAP with Samba -4: Using LDAP for Unix authentication -5: Compatibility with Active Directory - -1: What is LDAP? - -A directory is a type of hierarchical database optimised for simple query -operations, often used for storing user information. LDAP is the -Lightweight Directory Access Protocol, a protocol which is rapidly -becoming the Internet standard for accessing directories. - -Many client applications now support LDAP (including Microsoft's Active -Directory), and there are a number of servers available. The most popular -implementation for Unix is from the University of Michigan; its -homepage is at http://www.umich.edu/~dirsvcs/ldap/. - -Information in an LDAP tree always comes in attribute=value pairs. -The following is an example of a Samba user entry: - -uid=jbloggs, dc=samba, dc=org -objectclass=sambaAccount -uid=jbloggs -cn=Joe Bloggs -description=Samba User -uidNumber=500 -gidNumber=500 -rid=2000 -grouprid=2001 -lmPassword=46E389809F8D55BB78A48108148AD508 -ntPassword=1944CCE1AD6F80D8AEC9FC5BE77696F4 -pwdLastSet=35C11F1B -smbHome=\\samba1\jbloggs -homeDrive=Z -script=logon.bat -profile=\\samba1\jbloggs\profile -workstations=JOE - -Note that the top line is a special set of attributes called a -distinguished name which identifies the location of this entry beneath -the directory's root node. Recent Internet standards suggest the use of -domain-based naming using dc attributes (for instance, a microsoft.com -directory should have a root node of dc=microsoft, dc=com), although -this is not strictly necessary for isolated servers. - -There are a number of LDAP-related FAQ's on the internet, although -generally the best source of information is the documentation for the -individual servers. - -2: Why LDAP and Samba? - -Using an LDAP directory allows Samba to store user and group information -more reliably and flexibly than the current combination of smbpasswd, -smbgroup, groupdb and aliasdb with the Unix databases. If a need emerges -for extra user information to be stored, this can easily be added without -loss of backwards compatibility. - -In addition, the Samba LDAP schema is compatible with RFC2307, allowing -Unix password database information to be stored in the same entries. This -provides a single, consistent repository for both Unix and Windows user -information. - -3: Using LDAP with Samba - -1 Install and configure an LDAP server if you do not already have -one. You should read your LDAP server's documentation and set up the -configuration file and access control as desired. - -2 Build Samba (latest CVS is required) with: - - ./configure --with-ldap - make clean; make install - -3 Add the following options to the global section of smb.conf as -required. - -o ldap suffix - -This parameter specifies the node of the LDAP tree beneath which -Samba should store its information. This parameter MUST be provided -when using LDAP with Samba. - -Default: none - -Example: ldap suffix = "dc=mydomain, dc=org" - -o ldap bind as - -This parameter specifies the entity to bind to an LDAP directory as. -Usually it should be safe to use the LDAP root account; for larger -installations it may be preferable to restrict Samba's access. - -Default: none (bind anonymously) - -Example: ldap bind as = "uid=root, dc=mydomain, dc=org" - -o ldap passwd file - -This parameter specifies a file containing the password with which -Samba should bind to an LDAP server. For obvious security reasons -this file must be set to mode 700 or less. - -Default: none (bind anonymously) - -Example: ldap passwd file = /usr/local/samba/private/ldappasswd - -o ldap server - -This parameter specifies the DNS name of the LDAP server to use -when storing and retrieving information about Samba users and -groups. - -Default: ldap server = localhost - -o ldap port - -This parameter specifies the TCP port number of the LDAP server. - -Default: ldap port = 389 - -4 You should then be able to use the normal smbpasswd(8) command for -account administration (or User Manager in the near future). - -4: Using LDAP for Unix authentication - -The Samba LDAP code was designed to utilise RFC2307-compliant directory -entries if available. RFC2307 is a proposed standard for LDAP user -information which has been adopted by a number of vendors. Further -information is available at http://www.xedoc.com.au/~lukeh/ldap/. - -Of particular interest is Luke Howard's nameservice switch module -(nss_ldap) and PAM module (pam_ldap) implementing this standard, providing -LDAP-based password databases for Unix. If you are setting up a server to -provide integrated Unix/NT services than these are worth investigating. - -5: Compatibility with Active Directory - -The current implementation is not designed to be used with Microsoft -Active Directory, although compatibility may be added in the future. diff --git a/docs/textdocs/README.smbmount b/docs/textdocs/README.smbmount deleted file mode 100644 index 0c9d9bbe50..0000000000 --- a/docs/textdocs/README.smbmount +++ /dev/null @@ -1,51 +0,0 @@ -Date: February 26, 1999 - -Subject: smbmount / smbmnt / smbumount -============================================================================= - -The Samba-Team wishes to make known that the above programs are a part of -the SMBFS software package for the Linux operating system. They are very -definitely NOT part of Samba and are in general NOT supported by the -Samba-Team. - -In repsonse to flames to comp.protocols.smb and to feedback to -samba-bugs@samba.org we wish to place on record that the reason for which -these programs have not received the attention that some folks expect -from the Samba-Team is as stated above, they are NOT part of samba. - -Out of empathy for the Samba user base we have taken the liberty of -including patched source code for the above "SMBFS package" utilities -in the Samba tarball. - -Mike Warfield is temporary caretaker of SMBFS and may be contacted at -mike@samba.org. - -In deference to the fact that these programs are NOT part of Samba -the default binary packaging facilities included in the samba tarball -do NOT automatically create the updates needed for the Linux 2.2.x -kernel. If you require the updated smbmount / smbmnt / smbumount tools -then it will be necessary to modify the samba2.spec file to include -the --with-smbmount option to the samba "configure" script _AND_ -you will need to add these files to the appropriate locations in the "install" -and "files" sections also. The platform specific RPM SPEC files that you -will need to modify may be found under ~samba/packaging/"platform". - -The Samba-Team has considered the alternatives. These are: - 1) Include all SMBFS code with Samba: - - rejected because we do not have the resources to support it. - - SMBFS is specific and limited to Linux - 2) Just build the smbmount / smbmnt / smbumount binaries: - - doing this will break RPM dependencies for the SMBFS package - - this is not a good option either - 3) Encourage people to use the "smbsh" utility that is part of samba - and is being developed to replace the need for "SMBFS" - - this is portable to platforms other than Linux - - it allows each user to authenticate as themselves instead - of allowing all users to use an SMB session that is - authenticated as just one user. - -We have chosen the later and hope that our users will understand and support -the decision that has been made. - -For and on behalf of the Samba-Team -John H Terpstra diff --git a/docs/textdocs/rpcclient.1.txt b/docs/textdocs/rpcclient.1.txt deleted file mode 100644 index 78aaca02bc..0000000000 --- a/docs/textdocs/rpcclient.1.txt +++ /dev/null @@ -1,685 +0,0 @@ - -TITLE INFORMATION: rpcclient (1) -AUTHOR INFORMATION: Samba SAMBA -DATE INFORMATION: 23 Oct 1998 - -NAME -rpcclient - utility to manage MSRPC resources on servers - -SYNOPSIS - -rpcclient -[password] --S servername -[-U [username][%][password]] -[-W domain] -[-l log basename] -[-d debuglevel] -[-O socket options] -[-i scope] -[-N] -[-n NetBIOS name] -[-h] -[-I dest IP] -[-E] -[-t terminal code] -[-c command string] -[-B IP addr] -[-s smb.conf] -[-m max protocol] - -DESCRIPTION - -This program is part of the Samba suite. - -rpcclient is a client that can 'talk' to an SMB/CIFS MSRPC server. -Operations include things like managing a SAM Database (users, groups -and aliases) in the same way as the Windows NT programs -User Manager for Domains and Server Manager for Domains; -managing a remote registry in the same way as the Windows NT programs -REGEDT32.EXE and REGEDIT.EXE; viewing a remote event log (same -as EVENTVWR.EXE) etc. - -Typical usage is like this: - -rpcclient -I 192.168.32.1 -S "*SMBSERVER" -U fred%secret -l log - -OPTIONS - -o servername servername is the name of the server you want -to use on the server. This should be the NetBIOS name of the SMB/CIFS -server, which can be *SMBSERVER on Windows NT 4.0 or Samba Servers. - -Note that the server name required is NOT necessarily the IP (DNS) -host name of the server! The name required is a NetBIOS server name, -which may or may not be the same as the IP hostname of the machine -running the server. Also, remember that having a period in a NetBIOS -name (such as an IP hostname) may cause connectivity problems on your -network: NT tends to strip NetBIOS names from the leading period -onwards. - -The server name is looked up according to either the --R parameter to rpcclient or using the -name resolve order -parameter in the smb.conf file, allowing an administrator to change -the order and methods by which server names are looked up. - -o password password is the password required to access the -specified service on the specified server. If this parameter is -supplied, the -N option (suppress password prompt) is assumed. - -There is no default password. If no password is supplied on the -command line (either by using this parameter or adding a password to -the -U option (see below)) and the -N option is not specified, -the client will prompt for a password, even if the desired service -does not require one. (If no password is required, simply press ENTER -to provide a null password.) - -Note: Some servers (including OS/2 and Windows for Workgroups) insist -on an uppercase password. Lowercase or mixed case passwords may be -rejected by these servers. - -Be cautious about including passwords in scripts. - -o -s smb.conf This parameter specifies the pathname to the -Samba configuration file, smb.conf. This file controls all aspects of -the Samba setup on the machine and rpcclient also needs to read this -file. - -o -B IP addr The IP address to use when sending a broadcast packet. - -o -O socket options TCP socket options to set on the client -socket. See the socket options -parameter in the smb.conf (5) manpage for -the list of valid options. - -o -R name resolve order This option allows the user of -rpcclient to determine what name resolution services to use when -looking up the NetBIOS name of the host being connected to. - -The options are :"lmhosts", "host", "wins" and "bcast". They cause -names to be resolved as follows : - -o lmhosts : Lookup an IP address in the Samba lmhosts file. -The lmhosts file is stored in the same directory as the -smb.conf file. - -o host : Do a standard host name to IP address resolution, -using the system /etc/hosts, NIS, or DNS lookups. This method of name -resolution is operating system depended for instance on IRIX or -Solaris this may be controlled by the /etc/nsswitch.conf file). - -o wins : Query a name with the IP address listed in the wins -server parameter in the smb.conf file. If -no WINS server has been specified this method will be ignored. - -o bcast : Do a broadcast on each of the known local interfaces -listed in the interfaces parameter -in the smb.conf file. This is the least reliable of the name resolution -methods as it depends on the target host being on a locally connected -subnet. To specify a particular broadcast address the -B option -may be used. - -If this parameter is not set then the name resolve order defined -in the smb.conf file parameter -(name resolve order) -will be used. - -The default order is lmhosts, host, wins, bcast and without this -parameter or any entry in the "name resolve -order" parameter of the -smb.conf file the name resolution methods -will be attempted in this order. - -o -i scope This specifies a NetBIOS scope that rpcclient will use -to communicate with when generating NetBIOS names. For details on the -use of NetBIOS scopes, see rfc1001.txt and rfc1002.txt. NetBIOS scopes -are very rarely used, only set this parameter if you are the -system administrator in charge of all the NetBIOS systems you -communicate with. - -o -N If specified, this parameter suppresses the normal -password prompt from the client to the user. This is useful when -accessing a service that does not require a password. - -Unless a password is specified on the command line or this parameter -is specified, the client will request a password. - -o -n NetBIOS name By default, the client will use the local -machine's hostname (in uppercase) as its NetBIOS name. This parameter -allows you to override the host name and use whatever NetBIOS name you -wish. - -o -d debuglevel debuglevel is an integer from 0 to 10, or the -letter 'A'. - -The default value if this parameter is not specified is zero. - -The higher this value, the more detail will be logged to the log files -about the activities of the client. At level 0, only critical errors -and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of information about -operations carried out. - -Levels above 1 will generate considerable amounts of log data, and -should only be used when investigating a problem. Levels above 3 are -designed for use only by developers and generate HUGE amounts of log -data, most of which is extremely cryptic. If debuglevel is set to the -letter 'A', then all debug messages will be printed. This setting -is for developers only (and people who really want to know how the -code works internally). - -Note that specifying this parameter here will override the log -level parameter in the smb.conf -(5) file. - -o -p port This number is the TCP port number that will be used -when making connections to the server. The standard (well-known) TCP -port number for an SMB/CIFS server is 139, which is the default. - -o -l logfilename If specified, logfilename specifies a base -filename into which operational data from the running client will be -logged. - -The default base name is specified at compile time. - -The base name is used to generate actual log file names. For example, -if the name specified was "log", the debug file would be -log.client. - -The log file generated is never removed by the client. - -o -h Print the usage message for the client. - -o -I IP address IP address is the address of the server to -connect to. It should be specified in standard "a.b.c.d" notation. - -Normally the client would attempt to locate a named SMB/CIFS server by -looking it up via the NetBIOS name resolution mechanism described -above in the name resolve order parameter -above. Using this parameter will force the client to assume that the -server is on the machine with the specified IP address and the NetBIOS -name component of the resource being connected to will be ignored. - -There is no default for this parameter. If not supplied, it will be -determined automatically by the client as described above. - -o -E This parameter causes the client to write messages to the -standard error stream (stderr) rather than to the standard output -stream. - -By default, the client writes messages to standard output - typically -the user's tty. - -Note that by default, debug information is always sent to stderr. -Debug information can instead be sent to a file, using the --l log basename option. - -o -U username This specifies the user name that will be used by -the client to make a connection, assuming your server is not a downlevel -server that is running a protocol level that uses passwords on shares, -not on usernames. - -Some servers are fussy about the case of this name, and some insist -that it must be a valid NetBIOS name. - -If no username is supplied, it will default to an uppercase version of -the environment variable USER or LOGNAME in that order. If no -username is supplied and neither environment variable exists the -username "GUEST" will be used. - -If the USER environment variable contains a '%' character, -everything after that will be treated as a password. This allows you -to set the environment variable to be USER=username%password so -that a password is not passed on the command line (where it may be -seen by the ps command). - -If the service you are connecting to requires a password, it can be -supplied using the -U option, by appending a percent symbol ("%") -then the password to username. For example, to attach to a service as -user "fred" with password "secret", you would specify. - --U fred%secret - -on the command line. Note that there are no spaces around the percent -symbol. - -If you specify the password as part of username then the -N option -(suppress password prompt) is assumed. - -If you specify the password as a parameter AND as part of username -then the password as part of username will take precedence. Putting -nothing before or nothing after the percent symbol will cause an empty -username or an empty password to be used, respectively. - -The password may also be specified by setting up an environment -variable called PASSWORD that contains the users password. Note -that this may be very insecure on some systems but on others allows -users to script rpcclient commands without having a password appear in -the command line of a process listing. - -Note: Some servers (including OS/2 and Windows for Workgroups) insist -on an uppercase password. Lowercase or mixed case passwords may be -rejected by these servers. - -Be cautious about including passwords in scripts or in the -PASSWORD environment variable. Also, on many systems the command -line of a running process may be seen via the ps command to be -safe always allow rpcclient to prompt for a password and type it in -directly. - -o -t terminal code This option tells rpcclient how to interpret -filenames coming from the remote server. Usually Asian language -multibyte UNIX implementations use different character sets than -SMB/CIFS servers (EUC instead of SJIS for example). Setting -this parameter will let rpcclient convert between the UNIX filenames -and the SMB filenames correctly. This option has not been seriously -tested and may have some problems. - -The terminal codes include sjis, euc, jis7, jis8, -junet, hex, cap. This is not a complete list, check the -Samba source code for the complete list. - -o -m max protocol level With the new code in Samba2.0, -rpcclient always attempts to connect at the maximum -protocols level the server supports. This parameter is -preserved for backwards compatibility, but any string -following the -m will be ignored. - -o -W Domain Override the default Domain, which is the remote server's -Domain. This option may be needed to connect to some servers. It is also -possible to specify the remote server name as the Domain, which will -force the username and password to be authenticated against the remote -server's local SAM instead of the Domain SAM. - -o -c command string command string is a semicolon separated -list of commands to be executed instead of prompting from stdin. --N is implied by -c. - -This is particularly useful in scripts, e.g. -c 'lsaquery; enumusers -u'. - -OPERATIONS - -Once the client is running, the user is presented with a prompt : - -smb:\> - -The prompt indicates that the client is ready and waiting to carry out -a user command. Each command is a single word, optionally followed by -parameters specific to that command. Command and parameters are -space-delimited unless these notes specifically state otherwise. All -commands are case-insensitive. Parameters to commands may or may not -be case sensitive, depending on the command. - -You can specify names (e.g registry keys; user or group names; -service names) which have spaces in them by quoting the -name with double quotes, for example "dRMON SmartAgent". - -Parameters shown in square brackets (e.g., "[parameter]") are -optional. If not given, the command will use suitable -defaults. Parameters shown in angle brackets (e.g., "<parameter>") are -required. - -Note that all commands operating on the server are actually performed -by issuing a request to the server. Thus the behavior may vary from -server to server, depending on how the server was implemented. - -The commands available are listed in groups relating to different services: - -o Misccellaneous - - o ? [command] If "command" is specified, - the ? command will display a brief informative message about the - specified command. If no command is specified, a list of available - commands will be displayed. - - o ! [shell command] If "shell command" - is specified, the ! command will execute a shell locally and run - the specified shell command. If no command is specified, a local shell - will be run. - - o exit Terminate the connection with the server and - exit from the program. - - o help [command] See the ? - command above. - - o quit See the exit command. - -o Event Log - - o eventlog - list the events - -o Service Control - - It is possible to use command-line completion (if you have - the GNU readline library) for Service names, by pressing the - tab key. - - o svcenum - [-i] Lists Services Manager - - o svcinfo - <service> Service Information - - o svcstart - <service> [arg 0] [arg 1] ... Start Service - - o svcstop - <service> Stop Service - -o Scheduler - - o at - Scheduler control (at /? for syntax) - -o Registry - - It is possible to use command-line completion (if you have - the GNU readline library) for registry key and value names, - by pressing the tab key. - - o regenum - <keyname> Registry Enumeration (keys, values) - - o regdeletekey - <keyname> Registry Key Delete - - o regcreatekey - <keyname> [keyclass] Registry Key Create - - o shutdown - [-m message] [-t timeout] [-r or --reboot] Server Shutdown - - o regqueryval - <valname> Registry Value Query - - o regquerykey - <keyname> Registry Key Query - - o regdeleteval - <valname> Registry Value Delete - - o regcreateval - <valname> <valtype> <value> Registry Key Create - - o reggetsec - <keyname> Registry Key Security - - o regtestsec - <keyname> Test Registry Key Security - -o Printing - - It is possible to use command-line completion (if you have - the GNU readline library) for Printer and job names, by - pressing the tab key. - - o spoolenum - Enumerate Printers - - o spooljobs - <printer name> Enumerate Printer Jobs - - o spoolopen - <printer name> Spool Printer Open Test - -o Server - - o time - Display remote time - - o brsinfo - Browser Query Info - - o wksinfo - Workstation Query Info - - o srvinfo - Server Query Info - - o srvsessions - List sessions on a server - - o srvshares - List shares on a server - - o srvtransports - List transports on a server - - o srvconnections - List connections on a server - - o srvfiles - List files on a server - -o Local Security Authority - - o lsaquery - Query Info Policy (domain member or server) - - o lsaenumdomains - Enumerate Trusted Domains - - o lookupsids - Resolve names from SIDs - - o lookupnames - Resolve SIDs from names - - o querysecret - LSA Query Secret (developer use) - -o NETLOGON - - o ntlogin - [username] [password] NT Domain login test - - o domtrust - <domain> NT Inter-Domain test - - o samsync - SAM Synchronization Test (experimental) - -o SAM Database - - It is possible to use command-line completion (if you have - the GNU readline library) for user, group, alias and domain - names, by pressing the tab key. - - o lookupdomain - Obtain SID for a local domain - - o enumusers - SAM User Database Query (experimental!) - - o addgroupmem - <group rid> [user] [user] ... SAM Add Domain Group Member - - o addaliasmem - <alias rid> [member sid1] [member sid2] ... SAM Add Domain Alias Member - - o delgroupmem - <group rid> [user] [user] ... SAM Delete Domain Group Member - - o delaliasmem - <alias rid> [member sid1] [member sid2] ... SAM Delete Domain Alias Member - - o creategroup - SAM Create Domain Group - - o createalias - SAM Create Domain Alias - - o createuser - <username> SAM Create Domain User - - o delgroup - SAM Delete Domain Group - - o delalias - SAM Delete Domain Alias - - o ntpass - NT SAM Password Change - - o samuserset2 - <username> [-s acb_bits] SAM User Set Info 2 (experimental!) - - o samuserset - <username> [-p password] SAM User Set Info (experimental!) - - o samuser - <username> SAM User Query (experimental!) - - o samgroup - <groupname> SAM Group Query (experimental!) - - o samalias - <aliasname> SAM Alias Query - - o samaliasmem - <aliasname> SAM Alias Members - - o samgroupmem - SAM Group Members - - o samtest - SAM User Encrypted RPC test (experimental!) - - o enumaliases - SAM Aliases Database Query (experimental!) - - o enumdomains - SAM Domains Database Query (experimental!) - - o enumgroups - SAM Group Database Query (experimental!) - - o dominfo - SAM Query Domain Info - - o dispinfo - SAM Query Display Info - -NOTES - -Some servers are fussy about the case of supplied usernames, -passwords, share names (AKA service names) and machine names. If you -fail to connect try giving all parameters in uppercase. - -It is often necessary to use the -n option when connecting -to some types of servers. For example OS/2 LanManager insists on a valid -NetBIOS name being used, so you need to supply a valid name that would -be known to the server. - -rpcclient only works on servers that support MSRPC over SMB. This includes -all versions of Windows NT, including the ports to Unix such as AS/U and -AFPS. Support for MSRPC over SMB in other servers is currently rare and -patchy, for example Samba 2.0 only supports a limited set of MSRPC commands, -and some of those are not supported very well. - -ENVIRONMENT VARIABLES - -The variable USER may contain the username of the person using the -client. This information is used only if the protocol level is high -enough to support session-level passwords. - -The variable PASSWORD may contain the password of the person using -the client. This information is used only if the protocol level is -high enough to support session-level passwords. - -INSTALLATION - -The location of the client program is a matter for individual system -administrators. The following are thus suggestions only. - -It is recommended that the rpcclient software be installed in the -/usr/local/samba/bin or /usr/samba/bin directory, this directory -readable by all, writeable only by root. The client program itself -should be executable by all. The client should NOT be setuid or -setgid! - -The client log files should be put in a directory readable and -writeable only by the user. - -To test the client, you will need to know the name of a running -SMB/CIFS server. It is possible to run smbd (8) -an ordinary user - running that server as a daemon on a -user-accessible port (typically any port number over 1024) would -provide a suitable test server. - -DIAGNOSTICS - -Most diagnostics issued by the client are logged in a specified log -file. The log file name is specified at compile time, but may be -overridden on the command line. - -The number and nature of diagnostics available depends on the debug -level used by the client. If you have problems, set the debug level to -3 and peruse the log files. - -VERSION - -This man page is correct for version 2.0 of the Samba suite. - -BUGS - -o WARNING! -The MSPRC over SMB code has been developed from examining Network traces. -No documentation is available from the original creators (Microsoft) on -how MSRPC over SMB works, or how the individual MSRPC services work. -Microsoft's implementation of these services has been demonstrated (and -reported) to be... a bit flakey in places. - -The development of Samba's implementation of these services is also -a bit rough, and as more of the services are understood, it can even result -in versions of smbd (8) and rpcclient that are -incompatible for some commands or services. Additionally, the developers -are sending reports to Microsoft, and problems found by or reported to -Microsoft are fixed in Service Packs, which may also result in -incompatibilities. - -It is therefore not guaranteed that the execution of an rpcclient command will -work. It is also not guaranteed that the target server will continue to -operate, i.e the execution of an MSRPC command may cause a remote service to -fail, or even cause the remote server to fail. Usual rules apply, of course: -the developers bear absolutely no responsibility for the use, misuse, or -lack of use of rpcclient, by any person or persons, whether legal, -illegal, accidental, deliberate, intentional, malicious, curious, etc. - -o Command Completion -Command-completion (available if you have the GNU readline library) used on -certain commands may not operate correctly if the word being completed (such as a registry key) contains a space. Typically, the name will be completed, but -you will have to go back and put quotes round it, yourself. - -o SAM Database command-completion -Command-completion (available if you have the GNU readline library) of user, -group and alias names does not work on remote Domains, which would normally -be specified like this: - -DOMAIN_name\\user_name. - -The only names that can be completed in this fashion are the local names -in the SAM database of the target server. - -AUTHOR - -The original Samba software and related utilities were created by -Andrew Tridgell samba-bugs@samba.org. Samba is now developed -by the Samba Team as an Open Source project similar to the way the -Linux kernel is developed. - -The original Samba man pages were written by Karl Auer. The man page -sources were converted to YODL format (another excellent piece of Open -Source software, available at -ftp://ftp.icce.rug.nl/pub/unix/) -and updated for the Samba2.0 release by Jeremy Allison. This man page -was developed cut-and-paste style from the smbclient man page, by -Luke Kenneth Casson Leighton. -samba-bugs@samba.org. - -See samba (7) to find out how to get a full -list of contributors and details on how to submit bug reports, -comments etc. diff --git a/docs/yodldocs/LDAP.yo b/docs/yodldocs/LDAP.yo deleted file mode 100644 index cf454904d3..0000000000 --- a/docs/yodldocs/LDAP.yo +++ /dev/null @@ -1,161 +0,0 @@ -mailto(samba-bugs@samba.org) -article(LDAP Support in Samba)(Matthew Chapman)(29th November 1998 -htmltag(p)(1) htmltag(hr)(1) htmltag(h2)(1) -WARNING: This is experimental code. Use at your own risk, and please report -any bugs (after reading BUGS.txt). -htmltag(h2)(0) htmltag(br)(1) -) -redef(PARAGRAPH)(0)(htmlcommand(<p> -) txtcommand( - -)) - -sect(What is LDAP?) -A directory is a type of hierarchical database optimised for simple query -operations, often used for storing user information. LDAP is the -Lightweight Directory Access Protocol, a protocol which is rapidly -becoming the Internet standard for accessing directories. - -Many client applications now support LDAP (including Microsoft's Active -Directory), and there are a number of servers available. The most popular -implementation for Unix is from the em(University of Michigan); its -homepage is at url(tt(http://www.umich.edu/~dirsvcs/ldap/))(http://www.umich.edu/~dirsvcs/ldap/). - -Information in an LDAP tree always comes in tt(attribute=value) pairs. -The following is an example of a Samba user entry: - -verb(uid=jbloggs, dc=samba, dc=org -objectclass=sambaAccount -uid=jbloggs -cn=Joe Bloggs -description=Samba User -uidNumber=500 -gidNumber=500 -rid=2000 -grouprid=2001 -lmPassword=46E389809F8D55BB78A48108148AD508 -ntPassword=1944CCE1AD6F80D8AEC9FC5BE77696F4 -pwdLastSet=35C11F1B -smbHome=\\samba1\jbloggs -homeDrive=Z -script=logon.bat -profile=\\samba1\jbloggs\profile -workstations=JOE) - -Note that the top line is a special set of attributes called a -em(distinguished name) which identifies the location of this entry beneath -the directory's root node. Recent Internet standards suggest the use of -domain-based naming using tt(dc) attributes (for instance, a microsoft.com -directory should have a root node of tt(dc=microsoft, dc=com)), although -this is not strictly necessary for isolated servers. - -There are a number of LDAP-related FAQ's on the internet, although -generally the best source of information is the documentation for the -individual servers. - - -nl() -sect(Why LDAP and Samba?) - -Using an LDAP directory allows Samba to store user and group information -more reliably and flexibly than the current combination of smbpasswd, -smbgroup, groupdb and aliasdb with the Unix databases. If a need emerges -for extra user information to be stored, this can easily be added without -loss of backwards compatibility. - -In addition, the Samba LDAP schema is compatible with RFC2307, allowing -Unix password database information to be stored in the same entries. This -provides a single, consistent repository for both Unix and Windows user -information. - - -nl() -sect(Using LDAP with Samba) - -starteit() - -eit() Install and configure an LDAP server if you do not already have -one. You should read your LDAP server's documentation and set up the -configuration file and access control as desired. - -eit() Build Samba (latest CVS is required) with: - -verb( ./configure --with-ldap - make clean; make install) - -eit() Add the following options to the global section of tt(smb.conf) as -required. - -startdit() -dit(ldap suffix) - -This parameter specifies the node of the LDAP tree beneath which -Samba should store its information. This parameter MUST be provided -when using LDAP with Samba. - - bf(Default:) tt(none) - - bf(Example:) tt(ldap suffix = "dc=mydomain, dc=org") - -dit(ldap bind as) - -This parameter specifies the entity to bind to an LDAP directory as. -Usually it should be safe to use the LDAP root account; for larger -installations it may be preferable to restrict Samba's access. - - bf(Default:) tt(none (bind anonymously)) - - bf(Example:) tt(ldap bind as = "uid=root, dc=mydomain, dc=org") - -dit(ldap passwd file) - -This parameter specifies a file containing the password with which -Samba should bind to an LDAP server. For obvious security reasons -this file must be set to mode 700 or less. - - bf(Default:) tt(none (bind anonymously)) - - bf(Example:) tt(ldap passwd file = /usr/local/samba/private/ldappasswd) - -dit(ldap server) - -This parameter specifies the DNS name of the LDAP server to use -when storing and retrieving information about Samba users and -groups. - - bf(Default:) tt(ldap server = localhost) - -dit(ldap port) - -This parameter specifies the TCP port number of the LDAP server. - - bf(Default:) tt(ldap port = 389) - -enddit() - -eit() You should then be able to use the normal smbpasswd(8) command for -account administration (or User Manager in the near future). - -endeit() - - -nl() -sect(Using LDAP for Unix authentication) - -The Samba LDAP code was designed to utilise RFC2307-compliant directory -entries if available. RFC2307 is a proposed standard for LDAP user -information which has been adopted by a number of vendors. Further -information is available at url(tt(http://www.xedoc.com.au/~lukeh/ldap/))(http://www.xedoc.com.au/~lukeh/ldap). - -Of particular interest is Luke Howard's nameservice switch module -(nss_ldap) and PAM module (pam_ldap) implementing this standard, providing -LDAP-based password databases for Unix. If you are setting up a server to -provide integrated Unix/NT services than these are worth investigating. - - -nl() -sect(Compatibility with Active Directory) - -The current implementation is not designed to be used with Microsoft -Active Directory, although compatibility may be added in the future. - diff --git a/docs/yodldocs/debug2html.1.yo b/docs/yodldocs/debug2html.1.yo deleted file mode 100644 index ffbd3c5b0e..0000000000 --- a/docs/yodldocs/debug2html.1.yo +++ /dev/null @@ -1,62 +0,0 @@ -mailto(samba-bugs@samba.org) - -IFDEF(html)\ -(manpage(htmlcommand(debug2html(1)))(1)(29 Dec 1998)(Samba)(SAMBA))\ -(manpage(debug2html)(1)(29 Dec 1998)(Samba)(SAMBA)) - -label(NAME) -manpagename(debug2html)(Samba DEBUG to HTML translation filter) - -label(SYNOPSIS) -manpagesynopsis() - -debug2html [input-file [output-file]] - -label(DESCRIPTION) -manpagedescription() - -This program is part of the bf(Samba) suite. - -bf(debug2html) generates HTML files from Samba log files. Log files -produced by bf(nmbd)(8) or bf(smbd)(8) may then be viewed by a web -browser. The output conforms to the HTML 3.2 specification. - -The filenames specified on the command line are optional. If the -output-file is ommitted, output will go to bf(stdout). If the input-file -is ommitted, bf(debug2html) will read from bf(stdin). The filename "-" -can be used to indicate that input should be read from bf(stdin). For -example: - -tt(cat /usr/local/samba/var/log.nmb | debug2html - nmblog.html) nl() - -label(VERSION) -manpagesection(VERSION) - -This man page is correct for version 2.0 of the Samba suite. - -label(SEEALSO) -manpageseealso() - -url(bf(nmbd)(8))(nmbd.8.html), url(bf(smbd)(8))(smbd.8.html), -url(bf(samba)(7))(samba.7.html). - -label(AUTHOR) -manpageauthor() - -The original Samba software and related utilities were created by -Andrew Tridgell email(samba-bugs@samba.org). Samba is now developed -by the Samba Team as an Open Source project similar to the way the -Linux kernel is developed. - -The original Samba man pages were written by Karl Auer. The man page -sources were converted to YODL format (another excellent piece of Open -Source software, available at -url(bf(ftp://ftp.icce.rug.nl/pub/unix/))(ftp://ftp.icce.rug.nl/pub/unix/)) -and updated for the Samba2.0 release by Jeremy Allison. -email(samba-bugs@samba.org). - -bf(debug2html) was added by Chris Hertel. - -See url(bf(samba)(7))(samba.7.html) to find out how to get a full -list of contributors and details on how to submit bug reports, -comments etc. diff --git a/docs/yodldocs/rpcclient.1.yo b/docs/yodldocs/rpcclient.1.yo deleted file mode 100644 index 88b2104742..0000000000 --- a/docs/yodldocs/rpcclient.1.yo +++ /dev/null @@ -1,861 +0,0 @@ -mailto(samba-bugs@samba.org) - -manpage(rpcclient htmlcommand((1)))(1)(23 Oct 1998)(Samba)(SAMBA) - -label(NAME) -manpagename(rpcclient)(utility to manage MSRPC resources on servers) - -label(SYNOPSIS) -manpagesynopsis() - -bf(rpcclient) -[link(password)(password)] -link(-S servername)(servername) -[link(-U [username][%][password])(minusU)] -[link(-W domain)(minusW)] -[link(-l log basename)(minusl)] -[link(-d debuglevel)(minusd)] -[link(-O socket options)(minusO)] -[link(-i scope)(minusi)] -[link(-N)(minusN)] -[link(-n NetBIOS name)(minusn)] -[link(-h)(minush)] -[link(-I dest IP)(minusI)] -[link(-E)(minusE)] -[link(-t terminal code)(minust)] -[link(-c command string)(minusc)] -[link(-B IP addr)(minusB)] -[link(-s smb.conf)(minuss)] -[link(-m max protocol)(minusm)] - -label(DESCRIPTION) -manpagedescription() - -This program is part of the bf(Samba) suite. - -bf(rpcclient) is a client that can 'talk' to an SMB/CIFS MSRPC server. -Operations include things like managing a SAM Database (users, groups -and aliases) in the same way as the Windows NT programs -bf(User Manager for Domains) and bf(Server Manager for Domains); -managing a remote registry in the same way as the Windows NT programs -bf(REGEDT32.EXE) and bf(REGEDIT.EXE); viewing a remote event log (same -as bf(EVENTVWR.EXE)) etc. - -Typical usage is like this: nl() -tt(rpcclient -I 192.168.32.1 -S "*SMBSERVER" -U fred%secret -l log) -nl() - -bf(rpcclient) is em(not) suitable for usage on single-user systems -such as Windows 9X, as Windows 9X does not support MSRPC services. -Therefore, if you have problems using bf(rpcclient) with Windows 9X, -we don't want to hear about it. - -label(OPTIONS) -manpageoptions() - -startdit() - -label(servername) -dit(bf(servername)) servername is the name of the server you want -to use on the server. This should be the NetBIOS name of the SMB/CIFS -server, which can be bf(*SMBSERVER) on Windows NT 4.0 or Samba Servers. - -Note that the server name required is NOT necessarily the IP (DNS) -host name of the server! The name required is a NetBIOS server name, -which may or may not be the same as the IP hostname of the machine -running the server. Also, remember that having a period in a NetBIOS -name (such as an IP hostname) may cause connectivity problems on your -network: NT tends to strip NetBIOS names from the leading period -onwards. - -The server name is looked up according to either the -link(bf(-R))(minusR) parameter to bf(rpcclient) or using the -url(bf(name resolve order))(smb.conf.5.html#nameresolveorder) -parameter in the smb.conf file, allowing an administrator to change -the order and methods by which server names are looked up. - -label(password) -dit(bf(password)) password is the password required to access the -specified service on the specified server. If this parameter is -supplied, the link(bf(-N))(minusN) option (suppress password prompt) is assumed. - -There is no default password. If no password is supplied on the -command line (either by using this parameter or adding a password to -the link(bf(-U))(minusU) option (see below)) and the link(bf(-N))(minusN) option is not specified, -the client will prompt for a password, even if the desired service -does not require one. (If no password is required, simply press ENTER -to provide a null password.) - -Note: Some servers (including OS/2 and Windows for Workgroups) insist -on an uppercase password. Lowercase or mixed case passwords may be -rejected by these servers. - -Be cautious about including passwords in scripts. - -label(minuss) -dit(bf(-s smb.conf)) This parameter specifies the pathname to the -Samba configuration file, smb.conf. This file controls all aspects of -the Samba setup on the machine and rpcclient also needs to read this -file. - -label(minusB) -dit(bf(-B IP addr)) The IP address to use when sending a broadcast packet. - -label(minusO) -dit(bf(-O socket options)) TCP socket options to set on the client -socket. See the url(socket options)(smb.conf.5.html#socketoptions) -parameter in the url(bf(smb.conf (5)))(smb.conf.5.html) manpage for -the list of valid options. - -label(minusR) -dit(bf(-R name resolve order)) This option allows the user of -rpcclient to determine what name resolution services to use when -looking up the NetBIOS name of the host being connected to. - -The options are :"lmhosts", "host", "wins" and "bcast". They cause -names to be resolved as follows : - -startit() - -it() bf(lmhosts) : Lookup an IP address in the Samba lmhosts file. -The lmhosts file is stored in the same directory as the -url(bf(smb.conf))(smb.conf.5.html) file. - -it() bf(host) : Do a standard host name to IP address resolution, -using the system /etc/hosts, NIS, or DNS lookups. This method of name -resolution is operating system depended for instance on IRIX or -Solaris this may be controlled by the em(/etc/nsswitch.conf) file). - -it() bf(wins) : Query a name with the IP address listed in the url(bf(wins -server))(smb.conf.5.html#winsserver) parameter in the smb.conf file. If -no WINS server has been specified this method will be ignored. - -it() bf(bcast) : Do a broadcast on each of the known local interfaces -listed in the url(bf(interfaces))(smb.conf.5.html#interfaces) parameter -in the smb.conf file. This is the least reliable of the name resolution -methods as it depends on the target host being on a locally connected -subnet. To specify a particular broadcast address the link(bf(-B))(minusB) option -may be used. - -endit() - -If this parameter is not set then the name resolve order defined -in the url(bf(smb.conf))(smb.conf.5.html) file parameter -url((bf(name resolve order)))(smb.conf.5.html#nameresolveorder) -will be used. - -The default order is lmhosts, host, wins, bcast and without this -parameter or any entry in the url(bf("name resolve -order"))(smb.conf.5.html#nameresolveorder) parameter of the -url(bf(smb.conf))(smb.conf.5.html) file the name resolution methods -will be attempted in this order. - -label(minusi) -dit(bf(-i scope)) This specifies a NetBIOS scope that rpcclient will use -to communicate with when generating NetBIOS names. For details on the -use of NetBIOS scopes, see rfc1001.txt and rfc1002.txt. NetBIOS scopes -are em(very) rarely used, only set this parameter if you are the -system administrator in charge of all the NetBIOS systems you -communicate with. - -label(minusN) -dit(bf(-N)) If specified, this parameter suppresses the normal -password prompt from the client to the user. This is useful when -accessing a service that does not require a password. - -Unless a password is specified on the command line or this parameter -is specified, the client will request a password. - -label(minusn) -dit(bf(-n NetBIOS name)) By default, the client will use the local -machine's hostname (in uppercase) as its NetBIOS name. This parameter -allows you to override the host name and use whatever NetBIOS name you -wish. - -label(minusd) -dit(bf(-d debuglevel)) debuglevel is an integer from 0 to 10, or the -letter 'A'. - -The default value if this parameter is not specified is zero. - -The higher this value, the more detail will be logged to the log files -about the activities of the client. At level 0, only critical errors -and serious warnings will be logged. Level 1 is a reasonable level for -day to day running - it generates a small amount of information about -operations carried out. - -Levels above 1 will generate considerable amounts of log data, and -should only be used when investigating a problem. Levels above 3 are -designed for use only by developers and generate HUGE amounts of log -data, most of which is extremely cryptic. If debuglevel is set to the -letter 'A', then em(all) debug messages will be printed. This setting -is for developers only (and people who em(really) want to know how the -code works internally). - -Note that specifying this parameter here will override the url(bf(log -level))(smb.conf.5.html#loglevel) parameter in the url(bf(smb.conf -(5)))(smb.conf.5.html) file. - -label(minusp) -dit(bf(-p port)) This number is the TCP port number that will be used -when making connections to the server. The standard (well-known) TCP -port number for an SMB/CIFS server is 139, which is the default. - -label(minusl) -dit(bf(-l logfilename)) If specified, logfilename specifies a base -filename into which operational data from the running client will be -logged. - -The default base name is specified at compile time. - -The base name is used to generate actual log file names. For example, -if the name specified was "log", the debug file would be -tt(log.client). - -The log file generated is never removed by the client. - -label(minush) -dit(bf(-h)) Print the usage message for the client. - -label(minusI) -dit(bf(-I IP address)) IP address is the address of the server to -connect to. It should be specified in standard "a.b.c.d" notation. - -Normally the client would attempt to locate a named SMB/CIFS server by -looking it up via the NetBIOS name resolution mechanism described -above in the link(bf(name resolve order))(minusR) parameter -above. Using this parameter will force the client to assume that the -server is on the machine with the specified IP address and the NetBIOS -name component of the resource being connected to will be ignored. - -There is no default for this parameter. If not supplied, it will be -determined automatically by the client as described above. - -label(minusE) -dit(bf(-E)) This parameter causes the client to write messages to the -standard error stream (stderr) rather than to the standard output -stream. - -By default, the client writes messages to standard output - typically -the user's tty. - -Note that by default, debug information is always sent to stderr. -Debug information can instead be sent to a file, using the -link(-l log basename)(minusl) option. - -label(minusU) -dit(bf(-U username)) This specifies the user name that will be used by -the client to make a connection, assuming your server is not a downlevel -server that is running a protocol level that uses passwords on shares, -not on usernames. - -Some servers are fussy about the case of this name, and some insist -that it must be a valid NetBIOS name. - -If no username is supplied, it will default to an uppercase version of -the environment variable tt(USER) or tt(LOGNAME) in that order. If no -username is supplied and neither environment variable exists the -username "GUEST" will be used. - -If the tt(USER) environment variable contains a '%' character, -everything after that will be treated as a password. This allows you -to set the environment variable to be tt(USER=username%password) so -that a password is not passed on the command line (where it may be -seen by the ps command). - -If the service you are connecting to requires a password, it can be -supplied using the link(bf(-U))(minusU) option, by appending a percent symbol ("%") -then the password to username. For example, to attach to a service as -user tt("fred") with password tt("secret"), you would specify. nl() - -tt(-U fred%secret) nl() - -on the command line. Note that there are no spaces around the percent -symbol. - -If you specify the password as part of username then the link(bf(-N))(minusN) option -(suppress password prompt) is assumed. - -If you specify the password as a parameter em(AND) as part of username -then the password as part of username will take precedence. Putting -nothing before or nothing after the percent symbol will cause an empty -username or an empty password to be used, respectively. - -The password may also be specified by setting up an environment -variable called tt(PASSWORD) that contains the users password. Note -that this may be very insecure on some systems but on others allows -users to script rpcclient commands without having a password appear in -the command line of a process listing. - -Note: Some servers (including OS/2 and Windows for Workgroups) insist -on an uppercase password. Lowercase or mixed case passwords may be -rejected by these servers. - -Be cautious about including passwords in scripts or in the -tt(PASSWORD) environment variable. Also, on many systems the command -line of a running process may be seen via the tt(ps) command to be -safe always allow rpcclient to prompt for a password and type it in -directly. - -label(minust) -dit(bf(-t terminal code)) This option tells rpcclient how to interpret -filenames coming from the remote server. Usually Asian language -multibyte UNIX implementations use different character sets than -SMB/CIFS servers (em(EUC) instead of em(SJIS) for example). Setting -this parameter will let rpcclient convert between the UNIX filenames -and the SMB filenames correctly. This option has not been seriously -tested and may have some problems. - -The terminal codes include tt(sjis), tt(euc), tt(jis7), tt(jis8), -tt(junet), tt(hex), tt(cap). This is not a complete list, check the -Samba source code for the complete list. - -label(minusm) -dit(bf(-m max protocol level)) With the new code in Samba2.0, -bf(rpcclient) always attempts to connect at the maximum -protocols level the server supports. This parameter is -preserved for backwards compatibility, but any string -following the bf(-m) will be ignored. - -label(minusW) -dit(bf(-W Domain)) Override the default Domain, which is the remote server's -Domain. This option may be needed to connect to some servers. It is also -possible to specify the remote server name as the Domain, which will -force the username and password to be authenticated against the remote -server's local SAM instead of the Domain SAM. - -label(minusc) -dit(bf(-c command string)) command string is a semicolon separated -list of commands to be executed instead of prompting from stdin. -link(bf(-N))(minusN) is implied by bf(-c). - -This is particularly useful in scripts, e.g. tt(-c 'lsaquery; enumusers -u'). - -enddit() - -label(OPERATIONS) -manpagesection(OPERATIONS) - -Once the client is running, the user is presented with a prompt : - -tt(smb:\>) - -The prompt indicates that the client is ready and waiting to carry out -a user command. Each command is a single word, optionally followed by -parameters specific to that command. Command and parameters are -space-delimited unless these notes specifically state otherwise. All -commands are case-insensitive. Parameters to commands may or may not -be case sensitive, depending on the command. - -You can specify names (e.g registry keys; user or group names; -service names) which have spaces in them by quoting the -name with double quotes, for example "dRMON SmartAgent". - -Parameters shown in square brackets (e.g., "[parameter]") are -optional. If not given, the command will use suitable -defaults. Parameters shown in angle brackets (e.g., "<parameter>") are -required. - -Note that all commands operating on the server are actually performed -by issuing a request to the server. Thus the behavior may vary from -server to server, depending on how the server was implemented. - -The commands available are listed in groups relating to different services: - -startdit() - -dit(Misccellaneous) - - startdit() - - label(questionmark) dit(bf(? [command])) If "command" is specified, - the bf(?) command will display a brief informative message about the - specified command. If no command is specified, a list of available - commands will be displayed. - - label(exclaimationmark) dit(bf(! [shell command])) If "shell command" - is specified, the bf(!) command will execute a shell locally and run - the specified shell command. If no command is specified, a local shell - will be run. - - label(exit) dit(bf(exit)) Terminate the connection with the server and - exit from the program. - - label(help) dit(bf(help [command])) See the link(bf(?))(questionmark) - command above. - - label(quit) dit(bf(quit)) See the link(bf(exit))(exit) command. - - enddit() - -dit(Event Log) - - startdit() - - label(eventlog) dit(bf(eventlog)) - list the events - - enddit() - -dit(Service Control) - - These commands provide functionality similar to the Windows - NT Service Control Manager. - - It is possible to use command-line completion (if you have - the GNU readline library) for Service names, by pressing the - tab key. - - startdit() - - label(svcenum) dit(bf(svcenum)) - [-i] Lists Services. - - label(svcinfo) dit(bf(svcinfo)) - <service> Service Information - - label(svcstart) dit(bf(svcstart)) - <service> [arg 0] [arg 1] ... Start Service - - label(svcstop) dit(bf(svcstop)) - <service> Stop Service - - enddit() - -dit(Scheduler) - - startdit() - - label(at) dit(bf(at)) - Scheduler control (at /? for syntax) - - enddit() - -dit(Registry) - - It is possible to use command-line completion (if you have - the GNU readline library) for registry key and value names, - by pressing the tab key. - - startdit() - - label(regenum) dit(bf(regenum)) - <keyname> Registry Enumeration (keys, values) - - label(regdeletekey) dit(bf(regdeletekey)) - <keyname> Registry Key Delete - - label(regcreatekey) dit(bf(regcreatekey)) - <keyname> [keyclass] Registry Key Create - - label(shutdown) dit(bf(shutdown)) - [-m message] [-t timeout] [-r or --reboot] Server Shutdown - - label(regqueryval) dit(bf(regqueryval)) - <valname> Registry Value Query - - label(regquerykey) dit(bf(regquerykey)) - <keyname> Registry Key Query - - label(regdeleteval) dit(bf(regdeleteval)) - <valname> Registry Value Delete - - label(regcreateval) dit(bf(regcreateval)) - <valname> <valtype> <value> Registry Key Create - - label(reggetsec) dit(bf(reggetsec)) - <keyname> Registry Key Security - - label(regtestsec) dit(bf(regtestsec)) - <keyname> Test Registry Key Security - - enddit() - -dit(Printing) - - It is possible to use command-line completion (if you have - the GNU readline library) for Printer and job names, by - pressing the tab key. - - startdit() - - label(spoolenum) dit(bf(spoolenum)) - Enumerate Printers. This experimental command lists - all printers available on a remote spooler service. - - label(spooljobs) dit(bf(spooljobs)) - <printer name> Enumerate Printer Jobs. This - experimental command lists all jobs, and their - status, currently queued on a remote spooler - service. - - label(spoolopen) dit(bf(spoolopen)) - <printer name> Spool Printer Open Test. Experimental. - - enddit() - -dit(Server) - - startdit() - - label(time) dit(bf(time)) - Display remote time - - label(brsinfo) dit(bf(brsinfo)) - Browser Query Info - - label(wksinfo) dit(bf(wksinfo)) - Workstation Query Info - - label(srvinfo) dit(bf(srvinfo)) - Server Query Info - - label(srvsessions) dit(bf(srvsessions)) - List sessions on a server - - label(srvshares) dit(bf(srvshares)) - List shares on a server - - label(srvtransports) dit(bf(srvtransports)) - List transports on a server - - label(srvconnections) dit(bf(srvconnections)) - List connections on a server - - label(srvfiles) dit(bf(srvfiles)) - List files on a server - - enddit() - -dit(Local Security Authority) - - startdit() - - label(lsaquery) dit(bf(lsaquery)) - Query Info Policy (domain member or server). Obtains - the SID and name of the SAM database that a server - is responsible for (i.e a workstation's local SAM - database or the PDC SAM database). Also obtains the - SID and name of the SAM database that a server is - a member of. - - label(lsaenumdomains) dit(bf(lsaenumdomains)) - Enumerate Trusted Domains. Lists all Trusted and - Trusting Domains with which the remote PDC has - trust relationships established. - - label(lookupsids) dit(bf(lookupsids)) - <rid1 or sid1> <rid1 or sid2> ... Resolve names from SIDs. - Mostly to be used by developers or for troubleshooting, - this command can take either Security Identifiers or Relative - Identifiers, and look them up in the local SAM database - (or look them up in a remote Trusting or Trusted PDC's SAM - database if there is an appropriate Trust Relationship - established). The result is a list of names, of the - format: nl() - tt([TRUST_DOMAIN\]name). nl() - the link(bf(lsaquery))(lsaquery) command must have been - issued first if you wish to use lookupsids to resolve - RIDs. The only RIDs that will be resolved will be those - in the SAM database of the server to which you are connected. - - label(lookupnames) dit(bf(lookupnames)) - <name1> <name2> ... Resolve SIDs from names. - Mostly to be used by developers or for troubleshooting, - this command can take names of the following format: nl() - tt([DOMAIN_NAME\]name). nl() - The names, which can be user, group or alias names, will - either be looked up in the local SAM database or in a remote - Trusting or Trusted PDC's SAM database, if there is an - appropriate Trust Relationship established. The optional - Domain name component is the name of a SAM database, which - can include a workstation's local SAM database or a Trusted - Domain. - Example Usage: nl() - tt(lookupnames WKSTANAME\Administrator "Domain Guests") nl() - - label(querysecret) dit(bf(querysecret)) - LSA Query Secret (developer use). This command only appears - to work against NT4 SP3 and below. Due to its potential - for misuse, it looks like Microsoft modified their - implementation of the LsaRetrievePrivateData call to - always return NT_STATUS_ACCESS_DENIED. - - enddit() - -dit(NETLOGON) - - startdit() - - label(ntlogin) dit(bf(ntlogin)) - [username] [password] NT Domain login test. Demonstrates - how NT-style logins work. Mainly for developer usage, - it can also be used to verify that a user can log in - from a workstation. If you cannot ever get pam_ntdom - to work, try this command first. - - label(domtrust) dit(bf(domtrust)) - <domain> NT Inter-Domain test. Demonstrates how NT-style - Inter-Domain Trust relationships work. Mainly for - developer usage, it can also be used to verify that a - Trust Relationship is correctly established with a - remote PDC. - - label(samsync) dit(bf(samsync)) - SAM Synchronisation Test (experimental). This command - is used to manually synchronise a SAM database from a - remote PDC, when Samba is set up as a Backup Domain - Controller. - - enddit() - -dit(SAM Database) - - The SAM Database holds user, group and alias information. - The commands listed below allow operations such as adding - user accounts and changing their password; listing known - Domains; listing user, group and alias accounts; listing the - members of groups and aliases; adding or removing members - from groups and aliases. - - The commands that make changes are protected by Access Control - permissions on the remote server. You will therefore need to - be in the right NT group in order to perform certain operations. - If you find that a command fails with an NT_STATUS_ACCESS_DENIED - error and you think you should be able to perform that command, - talk to your Administrator: your username is probably not in the - correct NT alias or group (e.g Account Operators; Domain Admin). - - The commands that view information usually require less - user privileges. However, a particular remote server may be - configured with better security settings, so a command that - succeeds on one server may not succeed on another. - - It is possible to use command-line completion (if you have - the GNU readline library) for user, group, alias and domain - names, by pressing the tab key. - - startdit() - - label(lookupdomain) dit(bf(lookupdomain)) - Obtain SID for a local domain - - label(enumusers) dit(bf(enumusers)) - SAM User Database Query (experimental!) - - label(addgroupmem) dit(bf(addgroupmem)) - <group rid> [user] [user] ... SAM Add Domain Group Member - - label(addaliasmem) dit(bf(addaliasmem)) - <alias rid> [member sid1] [member sid2] ... SAM Add Domain Alias Member - - label(delgroupmem) dit(bf(delgroupmem)) - <group rid> [user] [user] ... SAM Delete Domain Group Member - - label(delaliasmem) dit(bf(delaliasmem)) - <alias rid> [member sid1] [member sid2] ... SAM Delete Domain Alias Member - - label(creategroup) dit(bf(creategroup)) - SAM Create Domain Group - - label(createalias) dit(bf(createalias)) - SAM Create Domain Alias - - label(createuser) dit(bf(createuser)) - <username> SAM Create Domain User - - label(delgroup) dit(bf(delgroup)) - SAM Delete Domain Group - - label(delalias) dit(bf(delalias)) - SAM Delete Domain Alias - - label(ntpass) dit(bf(ntpass)) - NT SAM Password Change - - label(samuserset2) dit(bf(samuserset2)) - <username> [-s acb_bits] SAM User Set Info 2 (experimental!) - - label(samuserset) dit(bf(samuserset)) - <username> [-p password] SAM User Set Info (experimental!) - - label(samuser) dit(bf(samuser)) - <username> SAM User Query (experimental!) - - label(samgroup) dit(bf(samgroup)) - <groupname> SAM Group Query (experimental!) - - label(samalias) dit(bf(samalias)) - <aliasname> SAM Alias Query - - label(samaliasmem) dit(bf(samaliasmem)) - <aliasname> SAM Alias Members - - label(samgroupmem) dit(bf(samgroupmem)) - SAM Group Members - - label(samtest) dit(bf(samtest)) - SAM User Encrypted RPC test (experimental!) - - label(enumaliases) dit(bf(enumaliases)) - SAM Aliases Database Query (experimental!) - - label(enumdomains) dit(bf(enumdomains)) - SAM Domains Database Query (experimental!) - - label(enumgroups) dit(bf(enumgroups)) - SAM Group Database Query (experimental!) - - label(dominfo) dit(bf(dominfo)) - SAM Query Domain Info - - label(dispinfo) dit(bf(dispinfo)) - SAM Query Display Info - - enddit() - -enddit() - - -label(NOTES) -manpagesection(NOTES) - -Some servers are fussy about the case of supplied usernames, -passwords, share names (AKA service names) and machine names. If you -fail to connect try giving all parameters in uppercase. - -It is often necessary to use the link(bf(-n))(minusn) option when connecting -to some types of servers. For example OS/2 LanManager insists on a valid -NetBIOS name being used, so you need to supply a valid name that would -be known to the server. - -rpcclient only works on servers that support MSRPC over SMB. This includes -all versions of Windows NT, including the ports to Unix such as AS/U and -AFPS. Support for MSRPC over SMB in other servers is currently rare and -patchy, for example Samba 2.0 only supports a limited set of MSRPC commands, -and some of those are not supported very well. - -label(ENVIRONMENTVARIABLES) -manpagesection(ENVIRONMENT VARIABLES) - -The variable bf(USER) may contain the username of the person using the -client. This information is used only if the protocol level is high -enough to support session-level passwords. - -The variable bf(PASSWORD) may contain the password of the person using -the client. This information is used only if the protocol level is -high enough to support session-level passwords. - -label(INSTALLATION) -manpagesection(INSTALLATION) - -The location of the client program is a matter for individual system -administrators. The following are thus suggestions only. - -It is recommended that the rpcclient software be installed in the -/usr/local/samba/bin or /usr/samba/bin directory, this directory -readable by all, writeable only by root. The client program itself -should be executable by all. The client should em(NOT) be setuid or -setgid! - -The client log files should be put in a directory readable and -writeable only by the user. - -To test the client, you will need to know the name of a running -SMB/CIFS server. It is possible to run url(bf(smbd (8)))(smbd.8.html) -an ordinary user - running that server as a daemon on a -user-accessible port (typically any port number over 1024) would -provide a suitable test server. - -label(DIAGNOSTICS) -manpagesection(DIAGNOSTICS) - -Most diagnostics issued by the client are logged in a specified log -file. The log file name is specified at compile time, but may be -overridden on the command line. - -The number and nature of diagnostics available depends on the debug -level used by the client. If you have problems, set the debug level to -3 and peruse the log files. - -label(VERSION) -manpagesection(VERSION) - -This man page is correct for version 2.0 of the Samba suite. - -label(BUGS) -manpagesection(BUGS) - -startdit() -dit(WARNING!) -The MSPRC over SMB code has been developed from examining Network traces. -No documentation is available from the original creators (Microsoft) on -how MSRPC over SMB works, or how the individual MSRPC services work. -Microsoft's implementation of these services has been demonstrated (and -reported) to be... a bit flakey in places. - -The development of Samba's implementation of these services is em(also) -a bit rough, and as more of the services are understood, it can even result -in versions of url(bf(smbd (8)))(smbd.8.html) and rpcclient that are -backwards-incompatible for some commands or services. Additionally, the -developers are sending reports to Microsoft, and problems found by or -reported to Microsoft are fixed in Service Packs, which may also result in -incompatibilities. - -It is therefore not guaranteed that the execution of an rpcclient command will -work. It is also not guaranteed that the target server will continue to -operate, i.e the execution of an MSRPC command may cause a remote service to -fail, or even cause the remote server to fail. Usual rules apply, of course: -the developers bear absolutely no responsibility or liability for the use, -misuse, or lack of use of rpcclient, by any person or persons, whether legal, -illegal, accidental, deliberate, intentional, malicious, curious, etc. - -This em(particularly) applies to the registry and SAM database commands. -As you are using a command-line tool not a mouse-clicky tool, you have -already proven yourself to be savvy, however if you don't know what you're -doing, then em(don't do it!). - -dit(Command Completion) -Command-completion (available if you have the GNU readline library) used on -certain commands may not operate correctly if the word being completed (such as a registry key) contains a space. Typically, the name will be completed, but -you will have to go back and put quotes round it, yourself. - -dit(SAM Database command-completion) -Command-completion (available if you have the GNU readline library) of user, -group and alias names does not work on remote Domains, which would normally -be specified like this: nl() -tt(DOMAIN_name\user_name). nl() -The only names that can be completed in this fashion are the local names -in the SAM database of the target server. - -dit(link(bf(spoolenum))(spoolenum)) -Due to current limitations in the rpcclient MSRPC / SMB code, and due to -the extremely poor MSRPC implementation (by Microsoft) of the spooler -service, if there are a large number of printers (or the names / comment -fields associated with the printers), this command will fail. The -limitations require further research to be carried out; we're stuck with -the poor \PIPE\spoolss design. - -endit() - -label(AUTHOR) -manpageauthor() - -The original Samba software and related utilities were created by -Andrew Tridgell email(samba-bugs@samba.org). Samba is now developed -by the Samba Team as an Open Source project similar to the way the -Linux kernel is developed. - -The original Samba man pages were written by Karl Auer. The man page -sources were converted to YODL format (another excellent piece of Open -Source software, available at -url(bf(ftp://ftp.icce.rug.nl/pub/unix/))(ftp://ftp.icce.rug.nl/pub/unix/)) -and updated for the Samba2.0 release by Jeremy Allison. This man page -was developed cut-and-paste style from the smbclient man page, by -Luke Kenneth Casson Leighton. -email(samba-bugs@samba.org). - -See url(bf(samba (7)))(samba.7.html) to find out how to get a full -list of contributors and details on how to submit bug reports, -comments etc. - |