make it stop...please, make it stop....

(This used to be commit 3d8f4113ebb178e2f8281edfce968d7035f443af)

6 files changed, 1043 insertions, 402 deletions

diff --git a/docs/docbook/manpages/testparm.1.sgml b/docs/docbook/manpages/testparm.1.sgml
new file mode 100644
index 0000000000..da90dc6e6c
--- /dev/null
+++ b/docs/docbook/manpages/testparm.1.sgml
@@ -0,0 +1,168 @@
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+<refentry id="testparm">
+
+<refmeta>
+	<refentrytitle>testparm</refentrytitle>
+	<manvolnum>1</manvolnum>
+</refmeta>
+
+
+<refnamediv>
+	<refname>testparm</refname>
+	<refpurpose>check an smb.conf configuration file for 
+	internal correctness</refpurpose>
+</refnamediv>
+
+<refsynopsisdiv>
+	<cmdsynopsis>
+		<command>testparm</command>
+		<arg choice="opt">-s</arg>
+		<arg choice="opt">-h</arg>
+		<arg choice="opt">-L &lt;servername&gt;</arg>
+		<arg choice="req">config filename</arg>
+		<arg choice="opt">hostname  hostIP</arg>
+	</cmdsynopsis>
+</refsynopsisdiv>
+
+<refsect1>
+	<title>DESCRIPTION</title>
+
+	<para>This tool is part of the <ulink url="samba.7.html">
+	Samba</ulink> suite.</para>
+
+	<para><command>testparm</command> is a very simple test program 
+	to check an <command>smbd</command> configuration file for 
+	internal correctness. If this program reports no problems, you 
+	can use the configuration file with confidence that <command>smbd
+	</command> will successfully load the configuration file.</para>
+
+
+	<para>Note that this is <emphasis>NOT</emphasis> a guarantee that 
+	the services specified in the configuration file will be 
+	available or will operate as expected. </para>
+
+	<para>If the optional host name and host IP address are 
+	specified on the command line, this test program will run through 
+	the service entries reporting whether the specified host
+	has access to each service. </para>
+
+	<para>If <command>testparm</command> finds an error in the <filename>
+	smb.conf</filename> file it returns an exit code of 1 to the calling 
+	program, else it returns an exit code of 0. This allows shell scripts 
+	to test the output from <command>testparm</command>.</para>
+</refsect1>
+
+<refsect1>
+	<title>OPTIONS</title>
+
+	<variablelist>
+		<varlistentry>
+		<term>-s</term>
+		<listitem><para>Without this option, <command>testparm</command> 
+		will prompt for a carriage return after printing the service 
+		names and before dumping the service definitions.</para></listitem>
+		</varlistentry>
+		
+		
+		<varlistentry>
+		<term>-h</term>
+		<listitem><para>Print usage message </para></listitem>
+		</varlistentry>
+		
+		
+		<varlistentry>
+		<term>-L servername</term>
+		<listitem><para>Sets the value of the %L macro to servername.
+		This is useful for testing include files specified with the 
+		%L macro. </para></listitem>
+		</varlistentry>
+
+
+		<varlistentry>
+		<term>configfilename</term>
+		<listitem><para>This is the name of the configuration file 
+		to check. If this parameter is not present then the 
+		default <filename>smb.conf</filename> file will be checked. 	
+		</para></listitem>
+		</varlistentry>
+
+
+		<varlistentry>
+		<term>hostname</term>
+		<listitem><para>If this parameter and the following are 
+		specified, then testparm will examine the <parameter>hosts
+		allow</parameter> and <parameter>hosts deny</parameter> 
+		parameters in the <filename>smb.conf</filename> file to 
+		determine if the hostname with this IP address would be
+		allowed access to the <command>smbd</command> server.  If 
+		this parameter is supplied, the hostIP parameter must also
+		be supplied.</para></listitem>
+		</varlistentry>
+
+
+		<varlistentry>
+		<term>hostIP</term>
+		<listitem><para>This is the IP address of the host specified 
+		in the previous parameter.  This address must be supplied 
+		if the hostname parameter is supplied. </para></listitem>
+		</varlistentry>
+	</variablelist>
+</refsect1>
+
+<refsect1>
+	<title>FILES</title>
+
+	<variablelist>
+		<varlistentry>
+		<term><filename>smb.conf</filename></term>
+		<listitem><para>This is usually the name of the configuration 
+		file used by <command>smbd</command>. 
+		</para></listitem>
+		</varlistentry>
+	</variablelist>
+</refsect1>
+
+<refsect1>
+	<title>DIAGNOSTICS</title>
+
+	<para>The program will issue a message saying whether the 
+	configuration file loaded OK or not. This message may be preceeded by 
+	errors and warnings if the file did not load. If the file was 
+	loaded OK, the program then dumps all known service details 
+	to stdout. </para>
+</refsect1>
+
+
+<refsect1>
+	<title>VERSION</title>
+
+	<para>This man page is correct for version 2.2 of 
+	the Samba suite.</para>
+</refsect1>
+
+<refsect1>
+	<title>SEE ALSO</title>
+	<para><ulink url="smb.conf.5.html"><filename>smb.conf(5)</filename></ulink>, 
+	<ulink url="smbd.8.html"><command>smbd(8)</command></ulink>
+	</para>
+</refsect1>
+
+<refsect1>
+	<title>AUTHOR</title>
+	
+	<para>The original Samba software and related utilities 
+	were created by Andrew Tridgell. Samba is now developed
+	by the Samba Team as an Open Source project similar 
+	to the way the Linux kernel is developed.</para>
+	
+	<para>The original Samba man pages were written by Karl Auer. 
+	The man page sources were converted to YODL format (another 
+	excellent piece of Open Source software, available at
+	<ulink url="ftp://ftp.icce.rug.nl/pub/unix/">
+	ftp://ftp.icce.rug.nl/pub/unix/</ulink>) and updated for the Samba 2.0 
+	release by Jeremy Allison.  The conversion to DocBook for 
+	Samba 2.2 was done by Gerald Carter</para>
+</refsect1>
+
+</refentry>
+
diff --git a/docs/docbook/manpages/testprns.1.sgml b/docs/docbook/manpages/testprns.1.sgml
new file mode 100644
index 0000000000..cd99494a9a
--- /dev/null
+++ b/docs/docbook/manpages/testprns.1.sgml
@@ -0,0 +1,143 @@
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+<refentry id="testprns">
+
+<refmeta>
+	<refentrytitle>testprns</refentrytitle>
+	<manvolnum>1</manvolnum>
+</refmeta>
+
+
+<refnamediv>
+	<refname>testprns</refname>
+	<refpurpose>check printer name for validity with smbd</refpurpose>
+</refnamediv>
+
+<refsynopsisdiv>
+	<cmdsynopsis>
+		<command>testprns</command>
+		<arg choice="req">printername</arg>
+		<arg choice="opt">printcapname</arg>
+	</cmdsynopsis>
+</refsynopsisdiv>
+
+<refsect1>
+	<title>DESCRIPTION</title>
+
+	<para>This tool is part of the <ulink url="samba.7.html">
+	Samba</ulink> suite.</para>
+
+	<para><command>testprns</command> is a very simple test program 
+	to determine whether a given printer name is valid for use in 
+	a service to be provided by <ulink url="smbd.8.html"><command>
+	smbd(8)</command></ulink>. </para>
+
+	<para>"Valid" in this context means "can be found in the 
+	printcap specified". This program is very stupid - so stupid in 
+	fact that it would be wisest to always specify the printcap file 
+	to use. </para>
+
+</refsect1>
+
+
+<refsect1>
+	<title>OPTIONS</title>
+
+	<variablelist>
+		<varlistentry>
+		<term>printername</term>
+		<listitem><para>The printer name to validate.</para>
+		
+		<para>Printer names are taken from the first field in each 
+		record in the printcap file, single printer names and sets 
+		of aliases separated by vertical bars ("|") are recognized. 
+		Note that no validation or checking of the printcap syntax is 
+		done beyond that required to extract the printer name. It may
+		be that the print spooling system is more forgiving or less 
+		forgiving than <command>testprns</command>. However, if 
+		<command>testprns</command> finds the printer then 
+		<command>smbd</command> should do so as well. </para></listitem>
+		</varlistentry>
+		
+		<varlistentry>	
+		<term>printcapname</term>
+		<listitem><para>This is the name of the printcap file within
+		which to search for the given printer name. </para>
+
+		<para>If no printcap name is specified <command>testprns
+		</command> will attempt to scan the printcap file name 
+		specified at compile time. </para></listitem>
+		</varlistentry>
+	</variablelist>
+</refsect1>
+
+
+<refsect1>
+	<title>FILES</title>
+
+	<variablelist>
+		<varlistentry>
+		<term><filename>/etc/printcap</filename></term>
+		<listitem><para>This is usually the default printcap 
+		file to scan. See <filename>printcap (5)</filename>. 
+		</para></listitem>
+		</varlistentry>
+	</variablelist>
+</refsect1>
+
+
+<refsect1>
+	<title>DIAGNOSTICS</title>
+
+	<para>If a printer is found to be valid, the message 
+	"Printer name &lt;printername&gt; is valid" will be 
+	displayed. </para>
+
+	<para>If a printer is found to be invalid, the message
+	"Printer name &lt;printername&gt; is not valid" will be 
+	displayed. </para>
+
+	<para>All messages that would normally be logged during
+	operation of the Samba daemons are logged by this program to the 
+	file <filename>test.log</filename> in the current directory. The
+	program runs at debuglevel 3, so quite extensive logging 
+	information is written. The log should be checked carefully 
+	for errors and warnings. </para>
+
+	<para>Other messages are self-explanatory. </para>
+</refsect1>
+
+
+<refsect1>
+	<title>VERSION</title>
+
+	<para>This man page is correct for version 2.2 of 
+	the Samba suite.</para>
+</refsect1>
+
+<refsect1>
+	<title>SEE ALSO</title>
+	<para><filename>printcap(5)</filename>, 
+	<ulink url="smbd.8.html"><command>smbd(8)</command></ulink>, 
+	<ulink url="smbclient.1.html"><command>smbclient(1)</command></ulink>
+	</para>
+</refsect1>
+
+<refsect1>
+	<title>AUTHOR</title>
+	
+	<para>The original Samba software and related utilities 
+	were created by Andrew Tridgell. Samba is now developed
+	by the Samba Team as an Open Source project similar 
+	to the way the Linux kernel is developed.</para>
+	
+	<para>The original Samba man pages were written by Karl Auer. 
+	The man page sources were converted to YODL format (another 
+	excellent piece of Open Source software, available at
+	<ulink url="ftp://ftp.icce.rug.nl/pub/unix/">
+	ftp://ftp.icce.rug.nl/pub/unix/</ulink>) and updated for the Samba 2.0 
+	release by Jeremy Allison.  The conversion to DocBook for 
+	Samba 2.2 was done by Gerald Carter</para>
+</refsect1>
+
+</refentry>
+
diff --git a/docs/htmldocs/testparm.1.html b/docs/htmldocs/testparm.1.html
index 8babecbcfa..d1a1e4333a 100644
--- a/docs/htmldocs/testparm.1.html
+++ b/docs/htmldocs/testparm.1.html
@@ -1,114 +1,291 @@
-
-
- 
-
-
-
-<html><head><title>testparm (1)</title>
-
-<link rev="made" href="mailto:samba@samba.org">
-</head>
-<body>
-
-<hr>
-
-<h1>testparm (1)</h1>
-<h2>Samba</h2>
-<h2>23 Oct 1998</h2>
-
-
-    
-<p><a name="NAME"></a>
-<h2>NAME</h2>
-    testparm - check an smb.conf configuration file for internal correctness
-<p><a name="SYNOPSIS"></a>
-<h2>SYNOPSIS</h2>
-     
-<p><strong>testparm</strong> [<a href="testparm.1.html#minuss">-s</a>] [<a href="testparm.1.html#minush">-h</a>] [<a href="testparm.1.html#minusL">-L servername</a>] [<a href="testparm.1.html#configfilename">configfilename</a>] [<a href="testparm.1.html#hostname">hostname</a> <a href="testparm.1.html#hostIP">hostIP</a>]
-<p><a name="DESCRIPTION"></a>
-<h2>DESCRIPTION</h2>
-    
-<p>This program is part of the <strong>Samba</strong> suite.
-<p><strong>testparm</strong> is a very simple test program to check an
-<a href="smbd.8.html"><strong>smbd</strong></a> configuration file for internal
-correctness. If this program reports no problems, you can use the
-configuration file with confidence that <a href="smbd.8.html"><strong>smbd</strong></a>
-will successfully load the configuration file.
-<p>Note that this is <em>NOT</em> a guarantee that the services specified in the
-configuration file will be available or will operate as expected.
-<p>If the optional host name and host IP address are specified on the
-command line, this test program will run through the service entries
-reporting whether the specified host has access to each service.
-<p>If <strong>testparm</strong> finds an error in the <a href="smb.conf.5.html"><strong>smb.conf</strong></a>
-file it returns an exit code of 1 to the calling program, else it returns
-an exit code of 0. This allows shell scripts to test the output from
-<strong>testparm</strong>.
-<p><a name="OPTIONS"></a>
-<h2>OPTIONS</h2>
-    
-<p><dl>
-<p><a name="minuss"></a>
-<p></p><dt><strong><strong>-s</strong></strong><dd> Without this option, <strong>testparm</strong> will prompt for a
-carriage return after printing the service names and before dumping
-the service definitions.
-<p><a name="minush"></a>
-<p></p><dt><strong><strong>-h</strong></strong><dd> Print usage message
-<p><a name="minusL"></a>
-<p></p><dt><strong><strong>-L servername</strong></strong><dd> Sets the value of the %L macro to servername. This
-is useful for testing include files specified with the %L macro.
-<p><a name="configfilename"></a>
-<p></p><dt><strong><strong>configfilename</strong></strong><dd> This is the name of the configuration file to
-check. If this parameter is not present then the default
-<a href="smb.conf.5.html"><strong>smb.conf</strong></a> file will be checked.
-<p><a name="hostname"></a>
-<p></p><dt><strong><strong>hostname</strong></strong><dd> If this parameter and the following are specified,
-then testparm will examine the <a href="smb.conf.5.html#hostsallow"><strong>"hosts
-allow"</strong></a> and <a href="smb.conf.5.html#hostsdeny"><strong>"hosts
-deny"</strong></a> parameters in the
-<a href="smb.conf.5.html"><strong>smb.conf</strong></a> file to determine if the hostname
-with this IP address would be allowed access to the
-<a href="smbd.8.html"><strong>smbd</strong></a> server. If this parameter is supplied, the
-<a href="testparm.1.html#hostIP">hostIP</a> parameter must also be supplied.
-<p><a name="hostIP"></a>
-<p></p><dt><strong><strong>hostIP</strong></strong><dd> This is the IP address of the host specified in the
-previous parameter. This address must be supplied if the hostname
-parameter is supplied.
-<p></dl>
-<p><a name="FILES"></a>
-<h2>FILES</h2>
-    
-<p><a href="smb.conf.5.html"><strong>smb.conf</strong></a>. This is usually the name of the
-configuration file used by <a href="smbd.8.html"><strong>smbd</strong></a>.
-<p><a name="DIAGNOSTICS"></a>
-<h2>DIAGNOSTICS</h2>
-    
-<p>The program will issue a message saying whether the configuration file
-loaded OK or not. This message may be preceded by errors and warnings
-if the file did not load. If the file was loaded OK, the program then
-dumps all known service details to stdout.
-<p><a name="VERSION"></a>
-<h2>VERSION</h2>
-    
-<p>This man page is correct for version 2.0 of the Samba suite.
-<p><a name="SEEALSO"></a>
-<h2>SEE ALSO</h2>
-    
-<p><a href="smb.conf.5.html"><strong>smb.conf (5)</strong></a>, <a href="smbd.8.html"><strong>smbd (8)</strong></a>
-<p><a name="AUTHOR"></a>
-<h2>AUTHOR</h2>
-    
-<p>The original Samba software and related utilities were created by
-Andrew Tridgell <a href="mailto:samba@samba.org"><em>samba@samba.org</em></a>. Samba is now developed
-by the Samba Team as an Open Source project similar to the way the
-Linux kernel is developed.
-<p>The original Samba man pages were written by Karl Auer. The man page
-sources were converted to YODL format (another excellent piece of Open
-Source software, available at
-<a href="ftp://ftp.icce.rug.nl/pub/unix/"><strong>ftp://ftp.icce.rug.nl/pub/unix/</strong></a>)
-and updated for the Samba2.0 release by Jeremy Allison.
-<a href="mailto:samba@samba.org"><em>samba@samba.org</em></a>.
-<p>See <a href="samba.7.html"><strong>samba (7)</strong></a> to find out how to get a full
-list of contributors and details on how to submit bug reports,
-comments etc.
-</body>
-</html>
+<HTML
+><HEAD
+><TITLE
+>testparm</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.57"></HEAD
+><BODY
+CLASS="REFENTRY"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><H1
+><A
+NAME="TESTPARM"
+>testparm</A
+></H1
+><DIV
+CLASS="REFNAMEDIV"
+><A
+NAME="AEN5"
+></A
+><H2
+>Name</H2
+>testparm&nbsp;--&nbsp;check an smb.conf configuration file for 
+	internal correctness</DIV
+><DIV
+CLASS="REFSYNOPSISDIV"
+><A
+NAME="AEN8"
+></A
+><H2
+>Synopsis</H2
+><P
+><B
+CLASS="COMMAND"
+>testparm</B
+>  [-s] [-h] [-L &lt;servername&gt;] {config filename} [hostname  hostIP]</P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN16"
+></A
+><H2
+>DESCRIPTION</H2
+><P
+>This tool is part of the <A
+HREF="samba.7.html"
+TARGET="_top"
+>	Samba</A
+> suite.</P
+><P
+><B
+CLASS="COMMAND"
+>testparm</B
+> is a very simple test program 
+	to check an <B
+CLASS="COMMAND"
+>smbd</B
+> configuration file for 
+	internal correctness. If this program reports no problems, you 
+	can use the configuration file with confidence that <B
+CLASS="COMMAND"
+>smbd
+	</B
+> will successfully load the configuration file.</P
+><P
+>Note that this is <I
+CLASS="EMPHASIS"
+>NOT</I
+> a guarantee that 
+	the services specified in the configuration file will be 
+	available or will operate as expected. </P
+><P
+>If the optional host name and host IP address are 
+	specified on the command line, this test program will run through 
+	the service entries reporting whether the specified host
+	has access to each service. </P
+><P
+>If <B
+CLASS="COMMAND"
+>testparm</B
+> finds an error in the <TT
+CLASS="FILENAME"
+>	smb.conf</TT
+> file it returns an exit code of 1 to the calling 
+	program, else it returns an exit code of 0. This allows shell scripts 
+	to test the output from <B
+CLASS="COMMAND"
+>testparm</B
+>.</P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN31"
+></A
+><H2
+>OPTIONS</H2
+><P
+></P
+><DIV
+CLASS="VARIABLELIST"
+><DL
+><DT
+>-s</DT
+><DD
+><P
+>Without this option, <B
+CLASS="COMMAND"
+>testparm</B
+> 
+		will prompt for a carriage return after printing the service 
+		names and before dumping the service definitions.</P
+></DD
+><DT
+>-h</DT
+><DD
+><P
+>Print usage message </P
+></DD
+><DT
+>-L servername</DT
+><DD
+><P
+>Sets the value of the %L macro to servername.
+		This is useful for testing include files specified with the 
+		%L macro. </P
+></DD
+><DT
+>configfilename</DT
+><DD
+><P
+>This is the name of the configuration file 
+		to check. If this parameter is not present then the 
+		default <TT
+CLASS="FILENAME"
+>smb.conf</TT
+> file will be checked. 	
+		</P
+></DD
+><DT
+>hostname</DT
+><DD
+><P
+>If this parameter and the following are 
+		specified, then testparm will examine the <TT
+CLASS="PARAMETER"
+><I
+>hosts
+		allow</I
+></TT
+> and <TT
+CLASS="PARAMETER"
+><I
+>hosts deny</I
+></TT
+> 
+		parameters in the <TT
+CLASS="FILENAME"
+>smb.conf</TT
+> file to 
+		determine if the hostname with this IP address would be
+		allowed access to the <B
+CLASS="COMMAND"
+>smbd</B
+> server.  If 
+		this parameter is supplied, the hostIP parameter must also
+		be supplied.</P
+></DD
+><DT
+>hostIP</DT
+><DD
+><P
+>This is the IP address of the host specified 
+		in the previous parameter.  This address must be supplied 
+		if the hostname parameter is supplied. </P
+></DD
+></DL
+></DIV
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN64"
+></A
+><H2
+>FILES</H2
+><P
+></P
+><DIV
+CLASS="VARIABLELIST"
+><DL
+><DT
+><TT
+CLASS="FILENAME"
+>smb.conf</TT
+></DT
+><DD
+><P
+>This is usually the name of the configuration 
+		file used by <B
+CLASS="COMMAND"
+>smbd</B
+>. 
+		</P
+></DD
+></DL
+></DIV
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN73"
+></A
+><H2
+>DIAGNOSTICS</H2
+><P
+>The program will issue a message saying whether the 
+	configuration file loaded OK or not. This message may be preceeded by 
+	errors and warnings if the file did not load. If the file was 
+	loaded OK, the program then dumps all known service details 
+	to stdout. </P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN76"
+></A
+><H2
+>VERSION</H2
+><P
+>This man page is correct for version 2.2 of 
+	the Samba suite.</P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN79"
+></A
+><H2
+>SEE ALSO</H2
+><P
+><A
+HREF="smb.conf.5.html"
+TARGET="_top"
+><TT
+CLASS="FILENAME"
+>smb.conf(5)</TT
+></A
+>, 
+	<A
+HREF="smbd.8.html"
+TARGET="_top"
+><B
+CLASS="COMMAND"
+>smbd(8)</B
+></A
+>
+	</P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN86"
+></A
+><H2
+>AUTHOR</H2
+><P
+>The original Samba software and related utilities 
+	were created by Andrew Tridgell. Samba is now developed
+	by the Samba Team as an Open Source project similar 
+	to the way the Linux kernel is developed.</P
+><P
+>The original Samba man pages were written by Karl Auer. 
+	The man page sources were converted to YODL format (another 
+	excellent piece of Open Source software, available at
+	<A
+HREF="ftp://ftp.icce.rug.nl/pub/unix/"
+TARGET="_top"
+>	ftp://ftp.icce.rug.nl/pub/unix/</A
+>) and updated for the Samba 2.0 
+	release by Jeremy Allison.  The conversion to DocBook for 
+	Samba 2.2 was done by Gerald Carter</P
+></DIV
+></BODY
+></HTML
+>
\ No newline at end of file
diff --git a/docs/htmldocs/testprns.1.html b/docs/htmldocs/testprns.1.html
index 42f5aebe74..94ab41c98d 100644
--- a/docs/htmldocs/testprns.1.html
+++ b/docs/htmldocs/testprns.1.html
@@ -1,98 +1,252 @@
-
-
- 
-
-
-
-<html><head><title>testprns (1)</title>
-
-<link rev="made" href="mailto:samba@samba.org">
-</head>
-<body>
-
-<hr>
-
-<h1>testprns (1)</h1>
-<h2>Samba</h2>
-<h2>23 Oct 1998</h2>
-
-
-    
-<p><a name="NAME"></a>
-<h2>NAME</h2>
-    testprns - check printer name for validity with smbd 
-<p><a name="SYNOPSIS"></a>
-<h2>SYNOPSIS</h2>
-     
-<p><strong>testprns</strong> <a href="testprns.1.html#printername">printername</a> [<a href="testprns.1.html#printcapname">printcapname</a>]
-<p><a name="DESCRIPTION"></a>
-<h2>DESCRIPTION</h2>
-    
-<p>This program is part of the <strong>Samba</strong> suite.
-<p><strong>testprns</strong> is a very simple test program to determine whether a
-given printer name is valid for use in a service to be provided by
-<a href="smbd.8.html"><strong>smbd</strong></a>.
-<p>"Valid" in this context means "can be found in the printcap
-specified". This program is very stupid - so stupid in fact that it
-would be wisest to always specify the printcap file to use.
-<p><a name="OPTIONS"></a>
-<h2>OPTIONS</h2>
-    
-<p><dl>
-<p><a name="printername"></a>
-<p></p><dt><strong><strong>printername</strong></strong><dd> The printer name to validate.
-<p>Printer names are taken from the first field in each record in the
-printcap file, single printer names and sets of aliases separated by
-vertical bars ("|") are recognized. Note that no validation or
-checking of the printcap syntax is done beyond that required to
-extract the printer name. It may be that the print spooling system is
-more forgiving or less forgiving than <strong>testprns</strong>. However, if
-<strong>testprns</strong> finds the printer then <a href="smbd.8.html"><strong>smbd</strong></a> should
-do so as well.
-<p><a name="printcapname"></a>
-<p></p><dt><strong><strong>printcapname</strong></strong><dd> This is the name of the printcap file within
-which to search for the given printer name.
-<p>If no printcap name is specified <strong>testprns</strong> will attempt to scan the
-printcap file name specified at compile time.
-<p></dl>
-<p><a name="FILES"></a>
-<h2>FILES</h2>
-    
-<p><strong>/etc/printcap</strong> This is usually the default printcap file to
-scan. See <strong>printcap (5)</strong>.
-<p><a name="DIAGNOSTICS"></a>
-<h2>DIAGNOSTICS</h2>
-    
-<p>If a printer is found to be valid, the message "Printer name
-&lt;printername&gt; is valid" will be displayed.
-<p>If a printer is found to be invalid, the message "Printer name
-&lt;printername&gt; is not valid" will be displayed.
-<p>All messages that would normally be logged during operation of the
-<a href="samba.7.html"><strong>Samba</strong></a> daemons are logged by this program to the
-file <code>test.log</code> in the current directory. The program runs at
-debuglevel 3, so quite extensive logging information is written. The
-log should be checked carefully for errors and warnings.
-<p>Other messages are self-explanatory.
-<p><a name="SEEALSO"></a>
-<h2>SEE ALSO</h2>
-    
-<p><strong>printcap (5)</strong>, <a href="smbd.8.html"><strong>smbd (8)</strong></a>, <a href="smbclient.1.html"><strong>smbclient
-(1)</strong></a>
-<p><a name="AUTHOR"></a>
-<h2>AUTHOR</h2>
-    
-<p>The original Samba software and related utilities were created by
-Andrew Tridgell <a href="mailto:samba@samba.org"><em>samba@samba.org</em></a>. Samba is now developed
-by the Samba Team as an Open Source project similar to the way the
-Linux kernel is developed.
-<p>The original Samba man pages were written by Karl Auer. The man page
-sources were converted to YODL format (another excellent piece of Open
-Source software, available at
-<a href="ftp://ftp.icce.rug.nl/pub/unix/"><strong>ftp://ftp.icce.rug.nl/pub/unix/</strong></a>)
-and updated for the Samba2.0 release by Jeremy Allison.
-<a href="mailto:samba@samba.org"><em>samba@samba.org</em></a>.
-<p>See <a href="samba.7.html"><strong>samba (7)</strong></a> to find out how to get a full
-list of contributors and details on how to submit bug reports,
-comments etc.
-</body>
-</html>
+<HTML
+><HEAD
+><TITLE
+>testprns</TITLE
+><META
+NAME="GENERATOR"
+CONTENT="Modular DocBook HTML Stylesheet Version 1.57"></HEAD
+><BODY
+CLASS="REFENTRY"
+BGCOLOR="#FFFFFF"
+TEXT="#000000"
+LINK="#0000FF"
+VLINK="#840084"
+ALINK="#0000FF"
+><H1
+><A
+NAME="TESTPRNS"
+>testprns</A
+></H1
+><DIV
+CLASS="REFNAMEDIV"
+><A
+NAME="AEN5"
+></A
+><H2
+>Name</H2
+>testprns&nbsp;--&nbsp;check printer name for validity with smbd</DIV
+><DIV
+CLASS="REFSYNOPSISDIV"
+><A
+NAME="AEN8"
+></A
+><H2
+>Synopsis</H2
+><P
+><B
+CLASS="COMMAND"
+>testprns</B
+>  {printername} [printcapname]</P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN13"
+></A
+><H2
+>DESCRIPTION</H2
+><P
+>This tool is part of the <A
+HREF="samba.7.html"
+TARGET="_top"
+>	Samba</A
+> suite.</P
+><P
+><B
+CLASS="COMMAND"
+>testprns</B
+> is a very simple test program 
+	to determine whether a given printer name is valid for use in 
+	a service to be provided by <A
+HREF="smbd.8.html"
+TARGET="_top"
+><B
+CLASS="COMMAND"
+>	smbd(8)</B
+></A
+>. </P
+><P
+>"Valid" in this context means "can be found in the 
+	printcap specified". This program is very stupid - so stupid in 
+	fact that it would be wisest to always specify the printcap file 
+	to use. </P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN22"
+></A
+><H2
+>OPTIONS</H2
+><P
+></P
+><DIV
+CLASS="VARIABLELIST"
+><DL
+><DT
+>printername</DT
+><DD
+><P
+>The printer name to validate.</P
+><P
+>Printer names are taken from the first field in each 
+		record in the printcap file, single printer names and sets 
+		of aliases separated by vertical bars ("|") are recognized. 
+		Note that no validation or checking of the printcap syntax is 
+		done beyond that required to extract the printer name. It may
+		be that the print spooling system is more forgiving or less 
+		forgiving than <B
+CLASS="COMMAND"
+>testprns</B
+>. However, if 
+		<B
+CLASS="COMMAND"
+>testprns</B
+> finds the printer then 
+		<B
+CLASS="COMMAND"
+>smbd</B
+> should do so as well. </P
+></DD
+><DT
+>printcapname</DT
+><DD
+><P
+>This is the name of the printcap file within
+		which to search for the given printer name. </P
+><P
+>If no printcap name is specified <B
+CLASS="COMMAND"
+>testprns
+		</B
+> will attempt to scan the printcap file name 
+		specified at compile time. </P
+></DD
+></DL
+></DIV
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN39"
+></A
+><H2
+>FILES</H2
+><P
+></P
+><DIV
+CLASS="VARIABLELIST"
+><DL
+><DT
+><TT
+CLASS="FILENAME"
+>/etc/printcap</TT
+></DT
+><DD
+><P
+>This is usually the default printcap 
+		file to scan. See <TT
+CLASS="FILENAME"
+>printcap (5)</TT
+>. 
+		</P
+></DD
+></DL
+></DIV
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN48"
+></A
+><H2
+>DIAGNOSTICS</H2
+><P
+>If a printer is found to be valid, the message 
+	"Printer name &lt;printername&gt; is valid" will be 
+	displayed. </P
+><P
+>If a printer is found to be invalid, the message
+	"Printer name &lt;printername&gt; is not valid" will be 
+	displayed. </P
+><P
+>All messages that would normally be logged during
+	operation of the Samba daemons are logged by this program to the 
+	file <TT
+CLASS="FILENAME"
+>test.log</TT
+> in the current directory. The
+	program runs at debuglevel 3, so quite extensive logging 
+	information is written. The log should be checked carefully 
+	for errors and warnings. </P
+><P
+>Other messages are self-explanatory. </P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN55"
+></A
+><H2
+>VERSION</H2
+><P
+>This man page is correct for version 2.2 of 
+	the Samba suite.</P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN58"
+></A
+><H2
+>SEE ALSO</H2
+><P
+><TT
+CLASS="FILENAME"
+>printcap(5)</TT
+>, 
+	<A
+HREF="smbd.8.html"
+TARGET="_top"
+><B
+CLASS="COMMAND"
+>smbd(8)</B
+></A
+>, 
+	<A
+HREF="smbclient.1.html"
+TARGET="_top"
+><B
+CLASS="COMMAND"
+>smbclient(1)</B
+></A
+>
+	</P
+></DIV
+><DIV
+CLASS="REFSECT1"
+><A
+NAME="AEN66"
+></A
+><H2
+>AUTHOR</H2
+><P
+>The original Samba software and related utilities 
+	were created by Andrew Tridgell. Samba is now developed
+	by the Samba Team as an Open Source project similar 
+	to the way the Linux kernel is developed.</P
+><P
+>The original Samba man pages were written by Karl Auer. 
+	The man page sources were converted to YODL format (another 
+	excellent piece of Open Source software, available at
+	<A
+HREF="ftp://ftp.icce.rug.nl/pub/unix/"
+TARGET="_top"
+>	ftp://ftp.icce.rug.nl/pub/unix/</A
+>) and updated for the Samba 2.0 
+	release by Jeremy Allison.  The conversion to DocBook for 
+	Samba 2.2 was done by Gerald Carter</P
+></DIV
+></BODY
+></HTML
+>
\ No newline at end of file
diff --git a/docs/manpages/testparm.1 b/docs/manpages/testparm.1
index e02b887394..a5aa932aa1 100644
--- a/docs/manpages/testparm.1
+++ b/docs/manpages/testparm.1
@@ -1,104 +1,100 @@
-.TH "testparm " "1" "23 Oct 1998" "Samba" "SAMBA" 
-.PP 
-.SH "NAME" 
-testparm \- check an smb\&.conf configuration file for internal correctness
-.PP 
-.SH "SYNOPSIS" 
-.PP 
-\fBtestparm\fP [-s] [-h] [-L servername] [configfilename] [hostname hostIP]
-.PP 
-.SH "DESCRIPTION" 
-.PP 
-This program is part of the \fBSamba\fP suite\&.
-.PP 
-\fBtestparm\fP is a very simple test program to check an
-\fBsmbd\fP configuration file for internal
-correctness\&. If this program reports no problems, you can use the
-configuration file with confidence that \fBsmbd\fP
-will successfully load the configuration file\&.
-.PP 
-Note that this is \fINOT\fP a guarantee that the services specified in the
-configuration file will be available or will operate as expected\&.
-.PP 
-If the optional host name and host IP address are specified on the
-command line, this test program will run through the service entries
-reporting whether the specified host has access to each service\&.
-.PP 
-If \fBtestparm\fP finds an error in the \fBsmb\&.conf\fP
-file it returns an exit code of 1 to the calling program, else it returns
-an exit code of 0\&. This allows shell scripts to test the output from
-\fBtestparm\fP\&.
-.PP 
-.SH "OPTIONS" 
-.PP 
-.IP 
-.IP "\fB-s\fP" 
-Without this option, \fBtestparm\fP will prompt for a
-carriage return after printing the service names and before dumping
-the service definitions\&.
-.IP 
-.IP "\fB-h\fP" 
-Print usage message
-.IP 
-.IP "\fB-L servername\fP" 
-Sets the value of the %L macro to servername\&. This
-is useful for testing include files specified with the %L macro\&.
-.IP 
-.IP "\fBconfigfilename\fP" 
-This is the name of the configuration file to
-check\&. If this parameter is not present then the default
-\fBsmb\&.conf\fP file will be checked\&.
-.IP 
-.IP "\fBhostname\fP" 
-If this parameter and the following are specified,
-then testparm will examine the \fB"hosts
-allow"\fP and \fB"hosts
-deny"\fP parameters in the
-\fBsmb\&.conf\fP file to determine if the hostname
-with this IP address would be allowed access to the
-\fBsmbd\fP server\&. If this parameter is supplied, the
-hostIP parameter must also be supplied\&.
-.IP 
-.IP "\fBhostIP\fP" 
-This is the IP address of the host specified in the
-previous parameter\&. This address must be supplied if the hostname
-parameter is supplied\&.
-.IP 
-.PP 
-.SH "FILES" 
-.PP 
-\fBsmb\&.conf\fP\&. This is usually the name of the
-configuration file used by \fBsmbd\fP\&.
-.PP 
-.SH "DIAGNOSTICS" 
-.PP 
-The program will issue a message saying whether the configuration file
-loaded OK or not\&. This message may be preceded by errors and warnings
-if the file did not load\&. If the file was loaded OK, the program then
-dumps all known service details to stdout\&.
-.PP 
-.SH "VERSION" 
-.PP 
-This man page is correct for version 2\&.0 of the Samba suite\&.
-.PP 
-.SH "SEE ALSO" 
-.PP 
-\fBsmb\&.conf (5)\fP, \fBsmbd (8)\fP
-.PP 
-.SH "AUTHOR" 
-.PP 
-The original Samba software and related utilities were created by
-Andrew Tridgell samba@samba\&.org\&. Samba is now developed
-by the Samba Team as an Open Source project similar to the way the
-Linux kernel is developed\&.
-.PP 
-The original Samba man pages were written by Karl Auer\&. The man page
-sources were converted to YODL format (another excellent piece of Open
-Source software, available at
-\fBftp://ftp\&.icce\&.rug\&.nl/pub/unix/\fP)
-and updated for the Samba2\&.0 release by Jeremy Allison\&.
-samba@samba\&.org\&.
-.PP 
-See \fBsamba (7)\fP to find out how to get a full
-list of contributors and details on how to submit bug reports,
-comments etc\&.
+.\" This manpage has been automatically generated by docbook2man-spec
+.\" from a DocBook document.  docbook2man-spec can be found at:
+.\" <http://shell.ipoline.com/~elmert/hacks/docbook2X/> 
+.\" Please send any bug reports, improvements, comments, patches, 
+.\" etc. to Steve Cheng <steve@ggi-project.org>.
+.TH "TESTPARM" "1" "22 February 2001" "" ""
+.SH NAME
+testparm \- check an smb.conf configuration file for  internal correctness
+.SH SYNOPSIS
+.sp
+\fBtestparm\fR [ \fB-s\fR ]  [ \fB-h\fR ]  [ \fB-L <servername>\fR ]  \fBconfig filename\fR [ \fBhostname hostIP\fR ] 
+.SH "DESCRIPTION"
+.PP
+This tool is part of the  Samba <URL:samba.7.html> suite.
+.PP
+\fBtestparm\fR is a very simple test program 
+to check an \fBsmbd\fR configuration file for 
+internal correctness. If this program reports no problems, you 
+can use the configuration file with confidence that \fBsmbd
+\fRwill successfully load the configuration file.
+.PP
+Note that this is \fBNOT\fR a guarantee that 
+the services specified in the configuration file will be 
+available or will operate as expected. 
+.PP
+If the optional host name and host IP address are 
+specified on the command line, this test program will run through 
+the service entries reporting whether the specified host
+has access to each service. 
+.PP
+If \fBtestparm\fR finds an error in the \fI smb.conf\fR file it returns an exit code of 1 to the calling 
+program, else it returns an exit code of 0. This allows shell scripts 
+to test the output from \fBtestparm\fR.
+.SH "OPTIONS"
+.TP
+\fB-s\fR
+Without this option, \fBtestparm\fR 
+will prompt for a carriage return after printing the service 
+names and before dumping the service definitions.
+.TP
+\fB-h\fR
+Print usage message 
+.TP
+\fB-L servername\fR
+Sets the value of the %L macro to servername.
+This is useful for testing include files specified with the 
+%L macro. 
+.TP
+\fBconfigfilename\fR
+This is the name of the configuration file 
+to check. If this parameter is not present then the 
+default \fIsmb.conf\fR file will be checked. 
+.TP
+\fBhostname\fR
+If this parameter and the following are 
+specified, then testparm will examine the \fIhosts
+allow\fR and \fIhosts deny\fR 
+parameters in the \fIsmb.conf\fR file to 
+determine if the hostname with this IP address would be
+allowed access to the \fBsmbd\fR server. If 
+this parameter is supplied, the hostIP parameter must also
+be supplied.
+.TP
+\fBhostIP\fR
+This is the IP address of the host specified 
+in the previous parameter. This address must be supplied 
+if the hostname parameter is supplied. 
+.SH "FILES"
+.TP
+\fB\fIsmb.conf\fB\fR
+This is usually the name of the configuration 
+file used by \fBsmbd\fR. 
+.SH "DIAGNOSTICS"
+.PP
+The program will issue a message saying whether the 
+configuration file loaded OK or not. This message may be preceeded by 
+errors and warnings if the file did not load. If the file was 
+loaded OK, the program then dumps all known service details 
+to stdout. 
+.SH "VERSION"
+.PP
+This man page is correct for version 2.2 of 
+the Samba suite.
+.SH "SEE ALSO"
+.PP
+\fIsmb.conf(5)\fR <URL:smb.conf.5.html>, 
+\fBsmbd(8)\fR <URL:smbd.8.html>
+.SH "AUTHOR"
+.PP
+The original Samba software and related utilities 
+were created by Andrew Tridgell. Samba is now developed
+by the Samba Team as an Open Source project similar 
+to the way the Linux kernel is developed.
+.PP
+The original Samba man pages were written by Karl Auer. 
+The man page sources were converted to YODL format (another 
+excellent piece of Open Source software, available at
+ftp://ftp.icce.rug.nl/pub/unix/ <URL:ftp://ftp.icce.rug.nl/pub/unix/>) and updated for the Samba 2.0 
+release by Jeremy Allison. The conversion to DocBook for 
+Samba 2.2 was done by Gerald Carter
diff --git a/docs/manpages/testprns.1 b/docs/manpages/testprns.1
index a9753d7637..91738ebcfe 100644
--- a/docs/manpages/testprns.1
+++ b/docs/manpages/testprns.1
@@ -1,87 +1,90 @@
-.TH "testprns " "1" "23 Oct 1998" "Samba" "SAMBA" 
-.PP 
-.SH "NAME" 
-testprns \- check printer name for validity with smbd 
-.PP 
-.SH "SYNOPSIS" 
-.PP 
-\fBtestprns\fP printername [printcapname]
-.PP 
-.SH "DESCRIPTION" 
-.PP 
-This program is part of the \fBSamba\fP suite\&.
-.PP 
-\fBtestprns\fP is a very simple test program to determine whether a
-given printer name is valid for use in a service to be provided by
-\fBsmbd\fP\&.
-.PP 
-"Valid" in this context means "can be found in the printcap
-specified"\&. This program is very stupid - so stupid in fact that it
-would be wisest to always specify the printcap file to use\&.
-.PP 
-.SH "OPTIONS" 
-.PP 
-.IP 
-.IP "\fBprintername\fP" 
-The printer name to validate\&.
-.IP 
-Printer names are taken from the first field in each record in the
-printcap file, single printer names and sets of aliases separated by
-vertical bars ("|") are recognized\&. Note that no validation or
-checking of the printcap syntax is done beyond that required to
-extract the printer name\&. It may be that the print spooling system is
-more forgiving or less forgiving than \fBtestprns\fP\&. However, if
-\fBtestprns\fP finds the printer then \fBsmbd\fP should
-do so as well\&.
-.IP 
-.IP "\fBprintcapname\fP" 
+.\" This manpage has been automatically generated by docbook2man-spec
+.\" from a DocBook document.  docbook2man-spec can be found at:
+.\" <http://shell.ipoline.com/~elmert/hacks/docbook2X/> 
+.\" Please send any bug reports, improvements, comments, patches, 
+.\" etc. to Steve Cheng <steve@ggi-project.org>.
+.TH "TESTPRNS" "1" "22 February 2001" "" ""
+.SH NAME
+testprns \- check printer name for validity with smbd
+.SH SYNOPSIS
+.sp
+\fBtestprns\fR \fBprintername\fR [ \fBprintcapname\fR ] 
+.SH "DESCRIPTION"
+.PP
+This tool is part of the  Samba <URL:samba.7.html> suite.
+.PP
+\fBtestprns\fR is a very simple test program 
+to determine whether a given printer name is valid for use in 
+a service to be provided by \fB smbd(8)\fR <URL:smbd.8.html>. 
+.PP
+"Valid" in this context means "can be found in the 
+printcap specified". This program is very stupid - so stupid in 
+fact that it would be wisest to always specify the printcap file 
+to use. 
+.SH "OPTIONS"
+.TP
+\fBprintername\fR
+The printer name to validate.
+
+Printer names are taken from the first field in each 
+record in the printcap file, single printer names and sets 
+of aliases separated by vertical bars ("|") are recognized. 
+Note that no validation or checking of the printcap syntax is 
+done beyond that required to extract the printer name. It may
+be that the print spooling system is more forgiving or less 
+forgiving than \fBtestprns\fR. However, if 
+\fBtestprns\fR finds the printer then 
+\fBsmbd\fR should do so as well. 
+.TP
+\fBprintcapname\fR
 This is the name of the printcap file within
-which to search for the given printer name\&.
-.IP 
-If no printcap name is specified \fBtestprns\fP will attempt to scan the
-printcap file name specified at compile time\&.
-.IP 
-.PP 
-.SH "FILES" 
-.PP 
-\fB/etc/printcap\fP This is usually the default printcap file to
-scan\&. See \fBprintcap (5)\fP\&.
-.PP 
-.SH "DIAGNOSTICS" 
-.PP 
-If a printer is found to be valid, the message "Printer name
-<printername> is valid" will be displayed\&.
-.PP 
-If a printer is found to be invalid, the message "Printer name
-<printername> is not valid" will be displayed\&.
-.PP 
-All messages that would normally be logged during operation of the
-\fBSamba\fP daemons are logged by this program to the
-file \f(CWtest\&.log\fP in the current directory\&. The program runs at
-debuglevel 3, so quite extensive logging information is written\&. The
-log should be checked carefully for errors and warnings\&.
-.PP 
-Other messages are self-explanatory\&.
-.PP 
-.SH "SEE ALSO" 
-.PP 
-\fBprintcap (5)\fP, \fBsmbd (8)\fP, \fBsmbclient
-(1)\fP
-.PP 
-.SH "AUTHOR" 
-.PP 
-The original Samba software and related utilities were created by
-Andrew Tridgell samba@samba\&.org\&. Samba is now developed
-by the Samba Team as an Open Source project similar to the way the
-Linux kernel is developed\&.
-.PP 
-The original Samba man pages were written by Karl Auer\&. The man page
-sources were converted to YODL format (another excellent piece of Open
-Source software, available at
-\fBftp://ftp\&.icce\&.rug\&.nl/pub/unix/\fP)
-and updated for the Samba2\&.0 release by Jeremy Allison\&.
-samba@samba\&.org\&.
-.PP 
-See \fBsamba (7)\fP to find out how to get a full
-list of contributors and details on how to submit bug reports,
-comments etc\&.
+which to search for the given printer name. 
+
+If no printcap name is specified \fBtestprns
+\fRwill attempt to scan the printcap file name 
+specified at compile time. 
+.SH "FILES"
+.TP
+\fB\fI/etc/printcap\fB\fR
+This is usually the default printcap 
+file to scan. See \fIprintcap (5)\fR. 
+.SH "DIAGNOSTICS"
+.PP
+If a printer is found to be valid, the message 
+"Printer name <printername> is valid" will be 
+displayed. 
+.PP
+If a printer is found to be invalid, the message
+"Printer name <printername> is not valid" will be 
+displayed. 
+.PP
+All messages that would normally be logged during
+operation of the Samba daemons are logged by this program to the 
+file \fItest.log\fR in the current directory. The
+program runs at debuglevel 3, so quite extensive logging 
+information is written. The log should be checked carefully 
+for errors and warnings. 
+.PP
+Other messages are self-explanatory. 
+.SH "VERSION"
+.PP
+This man page is correct for version 2.2 of 
+the Samba suite.
+.SH "SEE ALSO"
+.PP
+\fIprintcap(5)\fR, 
+\fBsmbd(8)\fR <URL:smbd.8.html>, 
+\fBsmbclient(1)\fR <URL:smbclient.1.html>
+.SH "AUTHOR"
+.PP
+The original Samba software and related utilities 
+were created by Andrew Tridgell. Samba is now developed
+by the Samba Team as an Open Source project similar 
+to the way the Linux kernel is developed.
+.PP
+The original Samba man pages were written by Karl Auer. 
+The man page sources were converted to YODL format (another 
+excellent piece of Open Source software, available at
+ftp://ftp.icce.rug.nl/pub/unix/ <URL:ftp://ftp.icce.rug.nl/pub/unix/>) and updated for the Samba 2.0 
+release by Jeremy Allison. The conversion to DocBook for 
+Samba 2.2 was done by Gerald Carter