subunit: Import new version.

26 files changed, 4061 insertions, 504 deletions

diff --git a/lib/subunit/filters/tap2subunit b/lib/subunit/filters/tap2subunit
new file mode 100755
index 0000000000..c571972225
--- /dev/null
+++ b/lib/subunit/filters/tap2subunit
@@ -0,0 +1,26 @@
+#!/usr/bin/env python
+#  subunit: extensions to python unittest to get test results from subprocesses.
+#  Copyright (C) 2009  Robert Collins <robertc@robertcollins.net>
+#
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
+#
+
+"""A filter that reads a TAP stream and outputs a subunit stream.
+
+More information on TAP is available at
+http://testanything.org/wiki/index.php/Main_Page.
+"""
+
+import sys
+
+from subunit import TAP2SubUnit
+sys.exit(TAP2SubUnit(sys.stdin, sys.stdout))
diff --git a/lib/subunit/python/iso8601/LICENSE b/lib/subunit/python/iso8601/LICENSE
new file mode 100644
index 0000000000..5ca93dae79
--- /dev/null
+++ b/lib/subunit/python/iso8601/LICENSE
@@ -0,0 +1,20 @@
+Copyright (c) 2007 Michael Twomey
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be included
+in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
diff --git a/lib/subunit/python/iso8601/README b/lib/subunit/python/iso8601/README
new file mode 100644
index 0000000000..5ec9d45597
--- /dev/null
+++ b/lib/subunit/python/iso8601/README
@@ -0,0 +1,26 @@
+A simple package to deal with ISO 8601 date time formats.
+
+ISO 8601 defines a neutral, unambiguous date string format, which also
+has the property of sorting naturally.
+
+e.g. YYYY-MM-DDTHH:MM:SSZ or 2007-01-25T12:00:00Z
+
+Currently this covers only the most common date formats encountered, not
+all of ISO 8601 is handled.
+
+Currently the following formats are handled:
+
+* 2006-01-01T00:00:00Z
+* 2006-01-01T00:00:00[+-]00:00
+
+I'll add more as I encounter them in my day to day life. Patches with 
+new formats and tests will be gratefully accepted of course :)
+
+References:
+
+* http://www.cl.cam.ac.uk/~mgk25/iso-time.html - simple overview
+
+* http://hydracen.com/dx/iso8601.htm - more detailed enumeration of
+  valid formats.
+
+See the LICENSE file for the license this package is released under.
diff --git a/lib/subunit/python/iso8601/README.subunit b/lib/subunit/python/iso8601/README.subunit
new file mode 100644
index 0000000000..d1ed8a11a6
--- /dev/null
+++ b/lib/subunit/python/iso8601/README.subunit
@@ -0,0 +1,5 @@
+This is a [slightly rearranged] import of http://pypi.python.org/pypi/iso8601/
+version 0.1.4. The OS X hidden files have been stripped, and the package
+turned into a single module, to simplify installation. The remainder of the
+source distribution is included in the subunit source tree at python/iso8601
+for reference.
diff --git a/lib/subunit/python/iso8601/setup.py b/lib/subunit/python/iso8601/setup.py
new file mode 100644
index 0000000000..cdb61ecf6a
--- /dev/null
+++ b/lib/subunit/python/iso8601/setup.py
@@ -0,0 +1,58 @@
+try:
+    from setuptools import setup
+except ImportError:
+    from distutils import setup
+
+long_description="""Simple module to parse ISO 8601 dates
+
+This module parses the most common forms of ISO 8601 date strings (e.g.
+2007-01-14T20:34:22+00:00) into datetime objects.
+
+>>> import iso8601
+>>> iso8601.parse_date("2007-01-25T12:00:00Z")
+datetime.datetime(2007, 1, 25, 12, 0, tzinfo=<iso8601.iso8601.Utc ...>)
+>>>
+
+Changes
+=======
+
+0.1.4
+-----
+
+* The default_timezone argument wasn't being passed through correctly,
+  UTC was being used in every case. Fixes issue 10.
+
+0.1.3
+-----
+
+* Fixed the microsecond handling, the generated microsecond values were 
+  way too small. Fixes issue 9.
+
+0.1.2
+-----
+
+* Adding ParseError to __all__ in iso8601 module, allows people to import it.
+  Addresses issue 7.
+* Be a little more flexible when dealing with dates without leading zeroes.
+  This violates the spec a little, but handles more dates as seen in the 
+  field. Addresses issue 6.
+* Allow date/time separators other than T.
+
+0.1.1
+-----
+
+* When parsing dates without a timezone the specified default is used. If no
+  default is specified then UTC is used. Addresses issue 4.
+"""
+
+setup(
+    name="iso8601",
+    version="0.1.4",
+    description=long_description.split("\n")[0],
+    long_description=long_description,
+    author="Michael Twomey",
+    author_email="micktwomey+iso8601@gmail.com",
+    url="http://code.google.com/p/pyiso8601/",
+    packages=["iso8601"],
+    license="MIT",
+)
diff --git a/lib/subunit/python/iso8601/test_iso8601.py b/lib/subunit/python/iso8601/test_iso8601.py
new file mode 100644
index 0000000000..ff9e2731cf
--- /dev/null
+++ b/lib/subunit/python/iso8601/test_iso8601.py
@@ -0,0 +1,111 @@
+import iso8601
+
+def test_iso8601_regex():
+    assert iso8601.ISO8601_REGEX.match("2006-10-11T00:14:33Z")
+
+def test_timezone_regex():
+    assert iso8601.TIMEZONE_REGEX.match("+01:00")
+    assert iso8601.TIMEZONE_REGEX.match("+00:00")
+    assert iso8601.TIMEZONE_REGEX.match("+01:20")
+    assert iso8601.TIMEZONE_REGEX.match("-01:00")
+
+def test_parse_date():
+    d = iso8601.parse_date("2006-10-20T15:34:56Z")
+    assert d.year == 2006
+    assert d.month == 10
+    assert d.day == 20
+    assert d.hour == 15
+    assert d.minute == 34
+    assert d.second == 56
+    assert d.tzinfo == iso8601.UTC
+
+def test_parse_date_fraction():
+    d = iso8601.parse_date("2006-10-20T15:34:56.123Z")
+    assert d.year == 2006
+    assert d.month == 10
+    assert d.day == 20
+    assert d.hour == 15
+    assert d.minute == 34
+    assert d.second == 56
+    assert d.microsecond == 123000
+    assert d.tzinfo == iso8601.UTC
+
+def test_parse_date_fraction_2():
+    """From bug 6
+    
+    """
+    d = iso8601.parse_date("2007-5-7T11:43:55.328Z'")
+    assert d.year == 2007
+    assert d.month == 5
+    assert d.day == 7
+    assert d.hour == 11
+    assert d.minute == 43
+    assert d.second == 55
+    assert d.microsecond == 328000
+    assert d.tzinfo == iso8601.UTC
+
+def test_parse_date_tz():
+    d = iso8601.parse_date("2006-10-20T15:34:56.123+02:30")
+    assert d.year == 2006
+    assert d.month == 10
+    assert d.day == 20
+    assert d.hour == 15
+    assert d.minute == 34
+    assert d.second == 56
+    assert d.microsecond == 123000
+    assert d.tzinfo.tzname(None) == "+02:30"
+    offset = d.tzinfo.utcoffset(None)
+    assert offset.days == 0
+    assert offset.seconds == 60 * 60 * 2.5
+
+def test_parse_invalid_date():
+    try:
+        iso8601.parse_date(None)
+    except iso8601.ParseError:
+        pass
+    else:
+        assert 1 == 2
+
+def test_parse_invalid_date2():
+    try:
+        iso8601.parse_date("23")
+    except iso8601.ParseError:
+        pass
+    else:
+        assert 1 == 2
+
+def test_parse_no_timezone():
+    """issue 4 - Handle datetime string without timezone
+    
+    This tests what happens when you parse a date with no timezone. While not
+    strictly correct this is quite common. I'll assume UTC for the time zone
+    in this case.
+    """
+    d = iso8601.parse_date("2007-01-01T08:00:00")
+    assert d.year == 2007
+    assert d.month == 1
+    assert d.day == 1
+    assert d.hour == 8
+    assert d.minute == 0
+    assert d.second == 0
+    assert d.microsecond == 0
+    assert d.tzinfo == iso8601.UTC
+
+def test_parse_no_timezone_different_default():
+    tz = iso8601.FixedOffset(2, 0, "test offset")
+    d = iso8601.parse_date("2007-01-01T08:00:00", default_timezone=tz)
+    assert d.tzinfo == tz
+
+def test_space_separator():
+    """Handle a separator other than T
+    
+    """
+    d = iso8601.parse_date("2007-06-23 06:40:34.00Z")
+    assert d.year == 2007
+    assert d.month == 6
+    assert d.day == 23
+    assert d.hour == 6
+    assert d.minute == 40
+    assert d.second == 34
+    assert d.microsecond == 0
+    assert d.tzinfo == iso8601.UTC
diff --git a/lib/subunit/python/subunit/__init__.py b/lib/subunit/python/subunit/__init__.py
index 406cd8765b..6e8df90317 100644
--- a/lib/subunit/python/subunit/__init__.py
+++ b/lib/subunit/python/subunit/__init__.py
@@ -1,28 +1,151 @@
 #
-#  subunit: extensions to python unittest to get test results from subprocesses.
+#  subunit: extensions to Python unittest to get test results from subprocesses.
 #  Copyright (C) 2005  Robert Collins <robertc@robertcollins.net>
-#  Copyright (C) 2007  Jelmer Vernooij <jelmer@samba.org>
 #
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 3 of the License, or
-#  (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
 #
 
+"""Subunit - a streaming test protocol
+
+Overview
+++++++++
+
+The ``subunit`` Python package provides a number of ``unittest`` extensions
+which can be used to cause tests to output Subunit, to parse Subunit streams
+into test activity, perform seamless test isolation within a regular test
+case and variously sort, filter and report on test runs.
+
+
+Key Classes
+-----------
+
+The ``subunit.TestProtocolClient`` class is a ``unittest.TestResult``
+extension which will translate a test run into a Subunit stream.
+
+The ``subunit.ProtocolTestCase`` class is an adapter between the Subunit wire
+protocol and the ``unittest.TestCase`` object protocol. It is used to translate
+a stream into a test run, which regular ``unittest.TestResult`` objects can
+process and report/inspect.
+
+Subunit has support for non-blocking usage too, for use with asyncore or
+Twisted. See the ``TestProtocolServer`` parser class for more details.
+
+Subunit includes extensions to the Python ``TestResult`` protocol. These are
+all done in a compatible manner: ``TestResult`` objects that do not implement
+the extension methods will not cause errors to be raised, instead the extension
+will either lose fidelity (for instance, folding expected failures to success
+in Python versions < 2.7 or 3.1), or discard the extended data (for extra
+details, tags, timestamping and progress markers).
+
+The test outcome methods ``addSuccess``, ``addError``, ``addExpectedFailure``,
+``addFailure``, ``addSkip`` take an optional keyword parameter ``details``
+which can be used instead of the usual python unittest parameter.
+When used the value of details should be a dict from ``string`` to 
+``testtools.content.Content`` objects. This is a draft API being worked on with
+the Python Testing In Python mail list, with the goal of permitting a common
+way to provide additional data beyond a traceback, such as captured data from
+disk, logging messages etc. The reference for this API is in testtools (0.9.0
+and newer).
+
+The ``tags(new_tags, gone_tags)`` method is called (if present) to add or
+remove tags in the test run that is currently executing. If called when no
+test is in progress (that is, if called outside of the ``startTest``, 
+``stopTest`` pair), the the tags apply to all sebsequent tests. If called
+when a test is in progress, then the tags only apply to that test.
+
+The ``time(a_datetime)`` method is called (if present) when a ``time:``
+directive is encountered in a Subunit stream. This is used to tell a TestResult
+about the time that events in the stream occured at, to allow reconstructing
+test timing from a stream.
+
+The ``progress(offset, whence)`` method controls progress data for a stream.
+The offset parameter is an int, and whence is one of subunit.PROGRESS_CUR,
+subunit.PROGRESS_SET, PROGRESS_PUSH, PROGRESS_POP. Push and pop operations
+ignore the offset parameter.
+
+
+Python test support
+-------------------
+
+``subunit.run`` is a convenience wrapper to run a Python test suite via
+the command line, reporting via Subunit::
+
+  $ python -m subunit.run mylib.tests.test_suite
+
+The ``IsolatedTestSuite`` class is a TestSuite that forks before running its
+tests, allowing isolation between the test runner and some tests.
+
+Similarly, ``IsolatedTestCase`` is a base class which can be subclassed to get
+tests that will fork() before that individual test is run.
+
+`ExecTestCase`` is a convenience wrapper for running an external 
+program to get a Subunit stream and then report that back to an arbitrary
+result object::
+
+ class AggregateTests(subunit.ExecTestCase):
+
+     def test_script_one(self):
+         './bin/script_one'
+
+     def test_script_two(self):
+         './bin/script_two'
+ 
+ # Normally your normal test loading would take of this automatically,
+ # It is only spelt out in detail here for clarity.
+ suite = unittest.TestSuite([AggregateTests("test_script_one"),
+     AggregateTests("test_script_two")])
+ # Create any TestResult class you like.
+ result = unittest._TextTestResult(sys.stdout)
+ # And run your suite as normal, Subunit will exec each external script as
+ # needed and report to your result object.
+ suite.run(result)
+
+Utility modules
+---------------
+
+* subunit.chunked contains HTTP chunked encoding/decoding logic.
+* subunit.test_results contains TestResult helper classes.
+"""
+
+import datetime
 import os
+import re
 from StringIO import StringIO
+import subprocess
 import sys
 import unittest
 
+import iso8601
+from testtools import content, content_type, ExtendedToOriginalDecorator
+try:
+    from testtools.testresult.real import _StringException
+    RemoteException = _StringException
+    _remote_exception_str = '_StringException' # For testing.
+except ImportError:
+    raise ImportError ("testtools.testresult.real does not contain "
+        "_StringException, check your version.")
+
+
+from testtools.testresult.real import _StringException
+
+import chunked, details, test_results
+
+
+PROGRESS_SET = 0
+PROGRESS_CUR = 1
+PROGRESS_PUSH = 2
+PROGRESS_POP = 3
+
+
 def test_suite():
     import subunit.tests
     return subunit.tests.test_suite()
@@ -42,211 +165,558 @@ def join_dir(base_path, path):
     return os.path.join(os.path.dirname(os.path.abspath(base_path)), path)
 
 
-class TestProtocolServer(object):
-    """A class for receiving results from a TestProtocol client."""
-
-    OUTSIDE_TEST = 0
-    TEST_STARTED = 1
-    READING_FAILURE = 2
-    READING_ERROR = 3
-
-    def __init__(self, client, stream=sys.stdout):
-        """Create a TestProtocol server instance.
-
-        client should be an object that provides
-         - startTest
-         - addSuccess
-         - addFailure
-         - addError
-         - stopTest
-        methods, i.e. a TestResult.
-        """
-        self.state = TestProtocolServer.OUTSIDE_TEST
-        self.client = client
-        self._stream = stream
-
-    def _addError(self, offset, line):
-        if (self.state == TestProtocolServer.TEST_STARTED and
-            self.current_test_description == line[offset:-1]):
-            self.state = TestProtocolServer.OUTSIDE_TEST
-            self.current_test_description = None
-            self.client.addError(self._current_test, RemoteError(""))
-            self.client.stopTest(self._current_test)
-            self._current_test = None
-        elif (self.state == TestProtocolServer.TEST_STARTED and
-            self.current_test_description + " [" == line[offset:-1]):
-            self.state = TestProtocolServer.READING_ERROR
-            self._message = ""
-        else:
-            self.stdOutLineReceived(line)
-
-    def _addFailure(self, offset, line):
-        if (self.state == TestProtocolServer.TEST_STARTED and
-            self.current_test_description == line[offset:-1]):
-            self.state = TestProtocolServer.OUTSIDE_TEST
-            self.current_test_description = None
-            self.client.addFailure(self._current_test, RemoteError())
-            self.client.stopTest(self._current_test)
-        elif (self.state == TestProtocolServer.TEST_STARTED and
-            self.current_test_description + " [" == line[offset:-1]):
-            self.state = TestProtocolServer.READING_FAILURE
-            self._message = ""
+def tags_to_new_gone(tags):
+    """Split a list of tags into a new_set and a gone_set."""
+    new_tags = set()
+    gone_tags = set()
+    for tag in tags:
+        if tag[0] == '-':
+            gone_tags.add(tag[1:])
         else:
-            self.stdOutLineReceived(line)
-
-    def _addSuccess(self, offset, line):
-        if (self.state == TestProtocolServer.TEST_STARTED and
-            self.current_test_description == line[offset:-1]):
-            self.client.addSuccess(self._current_test)
-            self.client.stopTest(self._current_test)
-            self.current_test_description = None
-            self._current_test = None
-            self.state = TestProtocolServer.OUTSIDE_TEST
+            new_tags.add(tag)
+    return new_tags, gone_tags
+
+
+class DiscardStream(object):
+    """A filelike object which discards what is written to it."""
+
+    def write(self, bytes):
+        pass
+
+
+class _ParserState(object):
+    """State for the subunit parser."""
+
+    def __init__(self, parser):
+        self.parser = parser
+
+    def addError(self, offset, line):
+        """An 'error:' directive has been read."""
+        self.parser.stdOutLineReceived(line)
+
+    def addExpectedFail(self, offset, line):
+        """An 'xfail:' directive has been read."""
+        self.parser.stdOutLineReceived(line)
+
+    def addFailure(self, offset, line):
+        """A 'failure:' directive has been read."""
+        self.parser.stdOutLineReceived(line)
+
+    def addSkip(self, offset, line):
+        """A 'skip:' directive has been read."""
+        self.parser.stdOutLineReceived(line)
+
+    def addSuccess(self, offset, line):
+        """A 'success:' directive has been read."""
+        self.parser.stdOutLineReceived(line)
+
+    def lineReceived(self, line):
+        """a line has been received."""
+        parts = line.split(None, 1)
+        if len(parts) == 2:
+            cmd, rest = parts
+            offset = len(cmd) + 1
+            cmd = cmd.strip(':')
+            if cmd in ('test', 'testing'):
+                self.startTest(offset, line)
+            elif cmd == 'error':
+                self.addError(offset, line)
+            elif cmd == 'failure':
+                self.addFailure(offset, line)
+            elif cmd == 'progress':
+                self.parser._handleProgress(offset, line)
+            elif cmd == 'skip':
+                self.addSkip(offset, line)
+            elif cmd in ('success', 'successful'):
+                self.addSuccess(offset, line)
+            elif cmd in ('tags',):
+                self.parser._handleTags(offset, line)
+                self.parser.subunitLineReceived(line)
+            elif cmd in ('time',):
+                self.parser._handleTime(offset, line)
+                self.parser.subunitLineReceived(line)
+            elif cmd == 'xfail':
+                self.addExpectedFail(offset, line)
+            else:
+                self.parser.stdOutLineReceived(line)
         else:
-            self.stdOutLineReceived(line)
+            self.parser.stdOutLineReceived(line)
+
+    def lostConnection(self):
+        """Connection lost."""
+        self.parser._lostConnectionInTest('unknown state of ')
+
+    def startTest(self, offset, line):
+        """A test start command received."""
+        self.parser.stdOutLineReceived(line)
+
 
-    def _appendMessage(self, line):
-        if line[0:2] == " ]":
-            # quoted ] start
-            self._message += line[1:]
+class _InTest(_ParserState):
+    """State for the subunit parser after reading a test: directive."""
+
+    def _outcome(self, offset, line, no_details, details_state):
+        """An outcome directive has been read.
+        
+        :param no_details: Callable to call when no details are presented.
+        :param details_state: The state to switch to for details
+            processing of this outcome.
+        """
+        if self.parser.current_test_description == line[offset:-1]:
+            self.parser._state = self.parser._outside_test
+            self.parser.current_test_description = None
+            no_details()
+            self.parser.client.stopTest(self.parser._current_test)
+            self.parser._current_test = None
+            self.parser.subunitLineReceived(line)
+        elif self.parser.current_test_description + " [" == line[offset:-1]:
+            self.parser._state = details_state
+            details_state.set_simple()
+            self.parser.subunitLineReceived(line)
+        elif self.parser.current_test_description + " [ multipart" == \
+            line[offset:-1]:
+            self.parser._state = details_state
+            details_state.set_multipart()
+            self.parser.subunitLineReceived(line)
         else:
-            self._message += line
-
-    def endQuote(self, line):
-        if self.state == TestProtocolServer.READING_FAILURE:
-            self.state = TestProtocolServer.OUTSIDE_TEST
-            self.current_test_description = None
-            self.client.addFailure(self._current_test,
-                                   RemoteError(self._message))
-            self.client.stopTest(self._current_test)
-        elif self.state == TestProtocolServer.READING_ERROR:
-            self.state = TestProtocolServer.OUTSIDE_TEST
-            self.current_test_description = None
-            self.client.addError(self._current_test,
-                                 RemoteError(self._message))
-            self.client.stopTest(self._current_test)
+            self.parser.stdOutLineReceived(line)
+
+    def _error(self):
+        self.parser.client.addError(self.parser._current_test,
+            details={})
+
+    def addError(self, offset, line):
+        """An 'error:' directive has been read."""
+        self._outcome(offset, line, self._error,
+            self.parser._reading_error_details)
+
+    def _xfail(self):
+        self.parser.client.addExpectedFailure(self.parser._current_test,
+            details={})
+
+    def addExpectedFail(self, offset, line):
+        """An 'xfail:' directive has been read."""
+        self._outcome(offset, line, self._xfail,
+            self.parser._reading_xfail_details)
+
+    def _failure(self):
+        self.parser.client.addFailure(self.parser._current_test, details={})
+
+    def addFailure(self, offset, line):
+        """A 'failure:' directive has been read."""
+        self._outcome(offset, line, self._failure,
+            self.parser._reading_failure_details)
+
+    def _skip(self):
+        self.parser.client.addSkip(self.parser._current_test, details={})
+
+    def addSkip(self, offset, line):
+        """A 'skip:' directive has been read."""
+        self._outcome(offset, line, self._skip,
+            self.parser._reading_skip_details)
+
+    def _succeed(self):
+        self.parser.client.addSuccess(self.parser._current_test, details={})
+
+    def addSuccess(self, offset, line):
+        """A 'success:' directive has been read."""
+        self._outcome(offset, line, self._succeed,
+            self.parser._reading_success_details)
+
+    def lostConnection(self):
+        """Connection lost."""
+        self.parser._lostConnectionInTest('')
+
+
+class _OutSideTest(_ParserState):
+    """State for the subunit parser outside of a test context."""
+
+    def lostConnection(self):
+        """Connection lost."""
+
+    def startTest(self, offset, line):
+        """A test start command received."""
+        self.parser._state = self.parser._in_test
+        self.parser._current_test = RemotedTestCase(line[offset:-1])
+        self.parser.current_test_description = line[offset:-1]
+        self.parser.client.startTest(self.parser._current_test)
+        self.parser.subunitLineReceived(line)
+
+
+class _ReadingDetails(_ParserState):
+    """Common logic for readin state details."""
+
+    def endDetails(self):
+        """The end of a details section has been reached."""
+        self.parser._state = self.parser._outside_test
+        self.parser.current_test_description = None
+        self._report_outcome()
+        self.parser.client.stopTest(self.parser._current_test)
+
+    def lineReceived(self, line):
+        """a line has been received."""
+        self.details_parser.lineReceived(line)
+        self.parser.subunitLineReceived(line)
+
+    def lostConnection(self):
+        """Connection lost."""
+        self.parser._lostConnectionInTest('%s report of ' %
+            self._outcome_label())
+
+    def _outcome_label(self):
+        """The label to describe this outcome."""
+        raise NotImplementedError(self._outcome_label)
+
+    def set_simple(self):
+        """Start a simple details parser."""
+        self.details_parser = details.SimpleDetailsParser(self)
+
+    def set_multipart(self):
+        """Start a multipart details parser."""
+        self.details_parser = details.MultipartDetailsParser(self)
+
+
+class _ReadingFailureDetails(_ReadingDetails):
+    """State for the subunit parser when reading failure details."""
+
+    def _report_outcome(self):
+        self.parser.client.addFailure(self.parser._current_test,
+            details=self.details_parser.get_details())
+
+    def _outcome_label(self):
+        return "failure"
+ 
+
+class _ReadingErrorDetails(_ReadingDetails):
+    """State for the subunit parser when reading error details."""
+
+    def _report_outcome(self):
+        self.parser.client.addError(self.parser._current_test,
+            details=self.details_parser.get_details())
+
+    def _outcome_label(self):
+        return "error"
+
+
+class _ReadingExpectedFailureDetails(_ReadingDetails):
+    """State for the subunit parser when reading xfail details."""
+
+    def _report_outcome(self):
+        self.parser.client.addExpectedFailure(self.parser._current_test,
+            details=self.details_parser.get_details())
+
+    def _outcome_label(self):
+        return "xfail"
+
+
+class _ReadingSkipDetails(_ReadingDetails):
+    """State for the subunit parser when reading skip details."""
+
+    def _report_outcome(self):
+        self.parser.client.addSkip(self.parser._current_test,
+            details=self.details_parser.get_details("skip"))
+
+    def _outcome_label(self):
+        return "skip"
+
+
+class _ReadingSuccessDetails(_ReadingDetails):
+    """State for the subunit parser when reading success details."""
+
+    def _report_outcome(self):
+        self.parser.client.addSuccess(self.parser._current_test,
+            details=self.details_parser.get_details("success"))
+
+    def _outcome_label(self):
+        return "success"
+
+
+class TestProtocolServer(object):
+    """A parser for subunit.
+    
+    :ivar tags: The current tags associated with the protocol stream.
+    """
+
+    def __init__(self, client, stream=None, forward_stream=None):
+        """Create a TestProtocolServer instance.
+
+        :param client: An object meeting the unittest.TestResult protocol.
+        :param stream: The stream that lines received which are not part of the
+            subunit protocol should be written to. This allows custom handling
+            of mixed protocols. By default, sys.stdout will be used for
+            convenience.
+        :param forward_stream: A stream to forward subunit lines to. This 
+            allows a filter to forward the entire stream while still parsing
+            and acting on it. By default forward_stream is set to
+            DiscardStream() and no forwarding happens.
+        """
+        self.client = ExtendedToOriginalDecorator(client)
+        if stream is None:
+            stream = sys.stdout
+        self._stream = stream
+        self._forward_stream = forward_stream or DiscardStream()
+        # state objects we can switch too
+        self._in_test = _InTest(self)
+        self._outside_test = _OutSideTest(self)
+        self._reading_error_details = _ReadingErrorDetails(self)
+        self._reading_failure_details = _ReadingFailureDetails(self)
+        self._reading_skip_details = _ReadingSkipDetails(self)
+        self._reading_success_details = _ReadingSuccessDetails(self)
+        self._reading_xfail_details = _ReadingExpectedFailureDetails(self)
+        # start with outside test.
+        self._state = self._outside_test
+
+    def _handleProgress(self, offset, line):
+        """Process a progress directive."""
+        line = line[offset:].strip()
+        if line[0] in '+-':
+            whence = PROGRESS_CUR
+            delta = int(line)
+        elif line == "push":
+            whence = PROGRESS_PUSH
+            delta = None
+        elif line == "pop":
+            whence = PROGRESS_POP
+            delta = None
         else:
-            self.stdOutLineReceived(line)
+            whence = PROGRESS_SET
+            delta = int(line)
+        self.client.progress(delta, whence)
+
+    def _handleTags(self, offset, line):
+        """Process a tags command."""
+        tags = line[offset:].split()
+        new_tags, gone_tags = tags_to_new_gone(tags)
+        self.client.tags(new_tags, gone_tags)
+
+    def _handleTime(self, offset, line):
+        # Accept it, but do not do anything with it yet.
+        try:
+            event_time = iso8601.parse_date(line[offset:-1])
+        except TypeError, e:
+            raise TypeError("Failed to parse %r, got %r" % (line, e))
+        self.client.time(event_time)
 
     def lineReceived(self, line):
         """Call the appropriate local method for the received line."""
-        if line == "]\n":
-            self.endQuote(line)
-        elif (self.state == TestProtocolServer.READING_FAILURE or
-              self.state == TestProtocolServer.READING_ERROR):
-            self._appendMessage(line)
-        else:
-            parts = line.split(None, 1)
-            if len(parts) == 2:
-                cmd, rest = parts
-                offset = len(cmd) + 1
-                cmd = cmd.strip(':')
-                if cmd in ('test', 'testing'):
-                    self._startTest(offset, line)
-                elif cmd == 'error':
-                    self._addError(offset, line)
-                elif cmd == 'failure':
-                    self._addFailure(offset, line)
-                elif cmd in ('success', 'successful'):
-                    self._addSuccess(offset, line)
-                else:
-                    self.stdOutLineReceived(line)
-            else:
-                self.stdOutLineReceived(line)
+        self._state.lineReceived(line)
+
+    def _lostConnectionInTest(self, state_string):
+        error_string = "lost connection during %stest '%s'" % (
+            state_string, self.current_test_description)
+        self.client.addError(self._current_test, RemoteError(error_string))
+        self.client.stopTest(self._current_test)
 
     def lostConnection(self):
         """The input connection has finished."""
-        if self.state == TestProtocolServer.TEST_STARTED:
-            self.client.addError(self._current_test,
-                                 RemoteError("lost connection during test '%s'"
-                                             % self.current_test_description))
-            self.client.stopTest(self._current_test)
-        elif self.state == TestProtocolServer.READING_ERROR:
-            self.client.addError(self._current_test,
-                                 RemoteError("lost connection during "
-                                             "error report of test "
-                                             "'%s'" %
-                                             self.current_test_description))
-            self.client.stopTest(self._current_test)
-        elif self.state == TestProtocolServer.READING_FAILURE:
-            self.client.addError(self._current_test,
-                                 RemoteError("lost connection during "
-                                             "failure report of test "
-                                             "'%s'" %
-                                             self.current_test_description))
-            self.client.stopTest(self._current_test)
+        self._state.lostConnection()
 
     def readFrom(self, pipe):
+        """Blocking convenience API to parse an entire stream.
+        
+        :param pipe: A file-like object supporting readlines().
+        :return: None.
+        """
         for line in pipe.readlines():
             self.lineReceived(line)
         self.lostConnection()
 
     def _startTest(self, offset, line):
         """Internal call to change state machine. Override startTest()."""
-        if self.state == TestProtocolServer.OUTSIDE_TEST:
-            self.state = TestProtocolServer.TEST_STARTED
-            self._current_test = RemotedTestCase(line[offset:-1])
-            self.current_test_description = line[offset:-1]
-            self.client.startTest(self._current_test)
-        else:
-            self.stdOutLineReceived(line)
+        self._state.startTest(offset, line)
+
+    def subunitLineReceived(self, line):
+        self._forward_stream.write(line)
 
     def stdOutLineReceived(self, line):
         self._stream.write(line)
 
 
-class RemoteException(Exception):
-    """An exception that occured remotely to python."""
-
-    def __eq__(self, other):
-        try:
-            return self.args == other.args
-        except AttributeError:
-            return False
-
-
 class TestProtocolClient(unittest.TestResult):
-    """A class that looks like a TestResult and informs a TestProtocolServer."""
+    """A TestResult which generates a subunit stream for a test run.
+    
+    # Get a TestSuite or TestCase to run
+    suite = make_suite()
+    # Create a stream (any object with a 'write' method)
+    stream = file('tests.log', 'wb')
+    # Create a subunit result object which will output to the stream
+    result = subunit.TestProtocolClient(stream)
+    # Optionally, to get timing data for performance analysis, wrap the
+    # serialiser with a timing decorator
+    result = subunit.test_results.AutoTimingTestResultDecorator(result)
+    # Run the test suite reporting to the subunit result object
+    suite.run(result)
+    # Close the stream.
+    stream.close()
+    """
 
     def __init__(self, stream):
-        super(TestProtocolClient, self).__init__()
+        unittest.TestResult.__init__(self)
         self._stream = stream
 
-    def addError(self, test, error):
-        """Report an error in test test."""
-        self._stream.write("error: %s [\n" % (test.shortDescription() or str(test)))
-        for line in self._exc_info_to_string(error, test).splitlines():
-            self._stream.write("%s\n" % line)
+    def addError(self, test, error=None, details=None):
+        """Report an error in test test.
+        
+        Only one of error and details should be provided: conceptually there
+        are two separate methods:
+            addError(self, test, error)
+            addError(self, test, details)
+
+        :param error: Standard unittest positional argument form - an
+            exc_info tuple.
+        :param details: New Testing-in-python drafted API; a dict from string
+            to subunit.Content objects.
+        """
+        self._addOutcome("error", test, error=error, details=details)
+
+    def addExpectedFailure(self, test, error=None, details=None):
+        """Report an expected failure in test test.
+        
+        Only one of error and details should be provided: conceptually there
+        are two separate methods:
+            addError(self, test, error)
+            addError(self, test, details)
+
+        :param error: Standard unittest positional argument form - an
+            exc_info tuple.
+        :param details: New Testing-in-python drafted API; a dict from string
+            to subunit.Content objects.
+        """
+        self._addOutcome("xfail", test, error=error, details=details)
+
+    def addFailure(self, test, error=None, details=None):
+        """Report a failure in test test.
+        
+        Only one of error and details should be provided: conceptually there
+        are two separate methods:
+            addFailure(self, test, error)
+            addFailure(self, test, details)
+
+        :param error: Standard unittest positional argument form - an
+            exc_info tuple.
+        :param details: New Testing-in-python drafted API; a dict from string
+            to subunit.Content objects.
+        """
+        self._addOutcome("failure", test, error=error, details=details)
+
+    def _addOutcome(self, outcome, test, error=None, details=None):
+        """Report a failure in test test.
+        
+        Only one of error and details should be provided: conceptually there
+        are two separate methods:
+            addOutcome(self, test, error)
+            addOutcome(self, test, details)
+
+        :param outcome: A string describing the outcome - used as the
+            event name in the subunit stream.
+        :param error: Standard unittest positional argument form - an
+            exc_info tuple.
+        :param details: New Testing-in-python drafted API; a dict from string
+            to subunit.Content objects.
+        """
+        self._stream.write("%s: %s" % (outcome, test.id()))
+        if error is None and details is None:
+            raise ValueError
+        if error is not None:
+            self._stream.write(" [\n")
+            for line in self._exc_info_to_string(error, test).splitlines():
+                self._stream.write("%s\n" % line)
+        else:
+            self._write_details(details)
         self._stream.write("]\n")
-        super(TestProtocolClient, self).addError(test, error)
 
-    def addFailure(self, test, error):
-        """Report a failure in test test."""
-        self._stream.write("failure: %s [\n" % (test.shortDescription() or str(test)))
-        for line in self._exc_info_to_string(error, test).splitlines():
-            self._stream.write("%s\n" % line)
-        self._stream.write("]\n")
-        super(TestProtocolClient, self).addFailure(test, error)
+    def addSkip(self, test, reason=None, details=None):
+        """Report a skipped test."""
+        if reason is None:
+            self._addOutcome("skip", test, error=None, details=details)
+        else:
+            self._stream.write("skip: %s [\n" % test.id())
+            self._stream.write("%s\n" % reason)
+            self._stream.write("]\n")
 
-    def addSuccess(self, test):
+    def addSuccess(self, test, details=None):
         """Report a success in a test."""
-        self._stream.write("successful: %s\n" % (test.shortDescription() or str(test)))
-        super(TestProtocolClient, self).addSuccess(test)
+        self._stream.write("successful: %s" % test.id())
+        if not details:
+            self._stream.write("\n")
+        else:
+            self._write_details(details)
+            self._stream.write("]\n")
+    addUnexpectedSuccess = addSuccess
 
     def startTest(self, test):
         """Mark a test as starting its test run."""
-        self._stream.write("test: %s\n" % (test.shortDescription() or str(test)))
-        super(TestProtocolClient, self).startTest(test)
+        self._stream.write("test: %s\n" % test.id())
+
+    def progress(self, offset, whence):
+        """Provide indication about the progress/length of the test run.
+
+        :param offset: Information about the number of tests remaining. If
+            whence is PROGRESS_CUR, then offset increases/decreases the
+            remaining test count. If whence is PROGRESS_SET, then offset
+            specifies exactly the remaining test count.
+        :param whence: One of PROGRESS_CUR, PROGRESS_SET, PROGRESS_PUSH,
+            PROGRESS_POP.
+        """
+        if whence == PROGRESS_CUR and offset > -1:
+            prefix = "+"
+        elif whence == PROGRESS_PUSH:
+            prefix = ""
+            offset = "push"
+        elif whence == PROGRESS_POP:
+            prefix = ""
+            offset = "pop"
+        else:
+            prefix = ""
+        self._stream.write("progress: %s%s\n" % (prefix, offset))
+
+    def time(self, a_datetime):
+        """Inform the client of the time.
+
+        ":param datetime: A datetime.datetime object.
+        """
+        time = a_datetime.astimezone(iso8601.Utc())
+        self._stream.write("time: %04d-%02d-%02d %02d:%02d:%02d.%06dZ\n" % (
+            time.year, time.month, time.day, time.hour, time.minute,
+            time.second, time.microsecond))
+
+    def _write_details(self, details):
+        """Output details to the stream.
+
+        :param details: An extended details dict for a test outcome.
+        """
+        self._stream.write(" [ multipart\n")
+        for name, content in sorted(details.iteritems()):
+            self._stream.write("Content-Type: %s/%s" %
+                (content.content_type.type, content.content_type.subtype))
+            parameters = content.content_type.parameters
+            if parameters:
+                self._stream.write(";")
+                param_strs = []
+                for param, value in parameters.iteritems():
+                    param_strs.append("%s=%s" % (param, value))
+                self._stream.write(",".join(param_strs))
+            self._stream.write("\n%s\n" % name)
+            encoder = chunked.Encoder(self._stream)
+            map(encoder.write, content.iter_bytes())
+            encoder.close()
+
+    def done(self):
+        """Obey the testtools result.done() interface."""
 
 
 def RemoteError(description=""):
-    if description == "":
-        description = "\n"
-    return (RemoteException, RemoteException(description), None)
+    return (_StringException, _StringException(description), None)
 
 
 class RemotedTestCase(unittest.TestCase):
-    """A class to represent test cases run in child processes."""
+    """A class to represent test cases run in child processes.
+    
+    Instances of this class are used to provide the Python test API a TestCase
+    that can be printed to the screen, introspected for metadata and so on.
+    However, as they are a simply a memoisation of a test that was actually
+    run in the past by a separate process, they cannot perform any interactive
+    actions.
+    """
 
     def __eq__ (self, other):
         try:
@@ -272,7 +742,7 @@ class RemotedTestCase(unittest.TestCase):
         return self.__description
 
     def id(self):
-        return "%s.%s" % (self._strclass(), self.__description)
+        return "%s" % (self.__description,)
 
     def __str__(self):
         return "%s (%s)" % (self.__description, self._strclass())
@@ -318,12 +788,18 @@ class ExecTestCase(unittest.TestCase):
 
     def _run(self, result):
         protocol = TestProtocolServer(result)
-        output = os.popen(self.script, mode='r')
-        protocol.readFrom(output)
+        output = subprocess.Popen(self.script, shell=True,
+            stdout=subprocess.PIPE).communicate()[0]
+        protocol.readFrom(StringIO(output))
 
 
 class IsolatedTestCase(unittest.TestCase):
-    """A TestCase which runs its tests in a forked process."""
+    """A TestCase which executes in a forked process.
+    
+    Each test gets its own process, which has a performance overhead but will
+    provide excellent isolation from global state (such as django configs,
+    zope utilities and so on).
+    """
 
     def run(self, result=None):
         if result is None: result = self.defaultTestResult()
@@ -331,7 +807,13 @@ class IsolatedTestCase(unittest.TestCase):
 
 
 class IsolatedTestSuite(unittest.TestSuite):
-    """A TestCase which runs its tests in a forked process."""
+    """A TestSuite which runs its tests in a forked process.
+    
+    This decorator that will fork() before running the tests and report the
+    results from the child process using a Subunit stream.  This is useful for
+    handling tests that mutate global state, or are testing C extensions that
+    could crash the VM.
+    """
 
     def run(self, result=None):
         if result is None: result = unittest.TestResult()
@@ -376,13 +858,256 @@ def run_isolated(klass, self, result):
     return result
 
 
-class SubunitTestRunner(object):
-    def __init__(self, stream=sys.stdout):
-        self.stream = stream
+def TAP2SubUnit(tap, subunit):
+    """Filter a TAP pipe into a subunit pipe.
+    
+    :param tap: A tap pipe/stream/file object.
+    :param subunit: A pipe/stream/file object to write subunit results to.
+    :return: The exit code to exit with.
+    """
+    BEFORE_PLAN = 0
+    AFTER_PLAN = 1
+    SKIP_STREAM = 2
+    client = TestProtocolClient(subunit)
+    state = BEFORE_PLAN
+    plan_start = 1
+    plan_stop = 0
+    def _skipped_test(subunit, plan_start):
+        # Some tests were skipped.
+        subunit.write('test test %d\n' % plan_start)
+        subunit.write('error test %d [\n' % plan_start)
+        subunit.write('test missing from TAP output\n')
+        subunit.write(']\n')
+        return plan_start + 1
+    # Test data for the next test to emit
+    test_name = None
+    log = []
+    result = None
+    def _emit_test():
+        "write out a test"
+        if test_name is None:
+            return
+        subunit.write("test %s\n" % test_name)
+        if not log:
+            subunit.write("%s %s\n" % (result, test_name))
+        else:
+            subunit.write("%s %s [\n" % (result, test_name))
+        if log:
+            for line in log:
+                subunit.write("%s\n" % line)
+            subunit.write("]\n")
+        del log[:]
+    for line in tap:
+        if state == BEFORE_PLAN:
+            match = re.match("(\d+)\.\.(\d+)\s*(?:\#\s+(.*))?\n", line)
+            if match:
+                state = AFTER_PLAN
+                _, plan_stop, comment = match.groups()
+                plan_stop = int(plan_stop)
+                if plan_start > plan_stop and plan_stop == 0:
+                    # skipped file
+                    state = SKIP_STREAM
+                    subunit.write("test file skip\n")
+                    subunit.write("skip file skip [\n")
+                    subunit.write("%s\n" % comment)
+                    subunit.write("]\n")
+                continue
+        # not a plan line, or have seen one before
+        match = re.match("(ok|not ok)(?:\s+(\d+)?)?(?:\s+([^#]*[^#\s]+)\s*)?(?:\s+#\s+(TODO|SKIP)(?:\s+(.*))?)?\n", line)
+        if match:
+            # new test, emit current one.
+            _emit_test()
+            status, number, description, directive, directive_comment = match.groups()
+            if status == 'ok':
+                result = 'success'
+            else:
+                result = "failure"
+            if description is None:
+                description = ''
+            else:
+                description = ' ' + description
+            if directive is not None:
+                if directive == 'TODO':
+                    result = 'xfail'
+                elif directive == 'SKIP':
+                    result = 'skip'
+                if directive_comment is not None:
+                    log.append(directive_comment)
+            if number is not None:
+                number = int(number)
+                while plan_start < number:
+                    plan_start = _skipped_test(subunit, plan_start)
+            test_name = "test %d%s" % (plan_start, description)
+            plan_start += 1
+            continue
+        match = re.match("Bail out\!(?:\s*(.*))?\n", line)
+        if match:
+            reason, = match.groups()
+            if reason is None:
+                extra = ''
+            else:
+                extra = ' %s' % reason
+            _emit_test()
+            test_name = "Bail out!%s" % extra
+            result = "error"
+            state = SKIP_STREAM
+            continue
+        match = re.match("\#.*\n", line)
+        if match:
+            log.append(line[:-1])
+            continue
+        subunit.write(line)
+    _emit_test()
+    while plan_start <= plan_stop:
+        # record missed tests
+        plan_start = _skipped_test(subunit, plan_start)
+    return 0
+
+
+def tag_stream(original, filtered, tags):
+    """Alter tags on a stream.
+
+    :param original: The input stream.
+    :param filtered: The output stream.
+    :param tags: The tags to apply. As in a normal stream - a list of 'TAG' or
+        '-TAG' commands.
+
+        A 'TAG' command will add the tag to the output stream,
+        and override any existing '-TAG' command in that stream.
+        Specifically:
+         * A global 'tags: TAG' will be added to the start of the stream.
+         * Any tags commands with -TAG will have the -TAG removed.
+
+        A '-TAG' command will remove the TAG command from the stream.
+        Specifically:
+         * A 'tags: -TAG' command will be added to the start of the stream.
+         * Any 'tags: TAG' command will have 'TAG' removed from it.
+        Additionally, any redundant tagging commands (adding a tag globally
+        present, or removing a tag globally removed) are stripped as a
+        by-product of the filtering.
+    :return: 0
+    """
+    new_tags, gone_tags = tags_to_new_gone(tags)
+    def write_tags(new_tags, gone_tags):
+        if new_tags or gone_tags:
+            filtered.write("tags: " + ' '.join(new_tags))
+            if gone_tags:
+                for tag in gone_tags:
+                    filtered.write("-" + tag)
+            filtered.write("\n")
+    write_tags(new_tags, gone_tags)
+    # TODO: use the protocol parser and thus don't mangle test comments.
+    for line in original:
+        if line.startswith("tags:"):
+            line_tags = line[5:].split()
+            line_new, line_gone = tags_to_new_gone(line_tags)
+            line_new = line_new - gone_tags
+            line_gone = line_gone - new_tags
+            write_tags(line_new, line_gone)
+        else:
+            filtered.write(line)
+    return 0
+
+
+class ProtocolTestCase(object):
+    """Subunit wire protocol to unittest.TestCase adapter.
+
+    ProtocolTestCase honours the core of ``unittest.TestCase`` protocol -
+    calling a ProtocolTestCase or invoking the run() method will make a 'test
+    run' happen. The 'test run' will simply be a replay of the test activity
+    that has been encoded into the stream. The ``unittest.TestCase`` ``debug``
+    and ``countTestCases`` methods are not supported because there isn't a
+    sensible mapping for those methods.
+    
+    # Get a stream (any object with a readline() method), in this case the
+    # stream output by the example from ``subunit.TestProtocolClient``.
+    stream = file('tests.log', 'rb')
+    # Create a parser which will read from the stream and emit 
+    # activity to a unittest.TestResult when run() is called.
+    suite = subunit.ProtocolTestCase(stream)
+    # Create a result object to accept the contents of that stream.
+    result = unittest._TextTestResult(sys.stdout)
+    # 'run' the tests - process the stream and feed its contents to result.
+    suite.run(result)
+    stream.close()
+
+    :seealso: TestProtocolServer (the subunit wire protocol parser).
+    """
+
+    def __init__(self, stream, passthrough=None, forward=False):
+        """Create a ProtocolTestCase reading from stream.
+
+        :param stream: A filelike object which a subunit stream can be read
+            from.
+        :param passthrough: A stream pass non subunit input on to. If not
+            supplied, the TestProtocolServer default is used.
+        :param forward: A stream to pass subunit input on to. If not supplied
+            subunit input is not forwarded.
+        """
+        self._stream = stream
+        self._passthrough = passthrough
+        self._forward = forward
+
+    def __call__(self, result=None):
+        return self.run(result)
 
-    def run(self, test):
-        "Run the given test case or test suite."
-        result = TestProtocolClient(self.stream)
-        test(result)
-        return result
+    def run(self, result=None):
+        if result is None:
+            result = self.defaultTestResult()
+        protocol = TestProtocolServer(result, self._passthrough, self._forward)
+        line = self._stream.readline()
+        while line:
+            protocol.lineReceived(line)
+            line = self._stream.readline()
+        protocol.lostConnection()
+
+
+class TestResultStats(unittest.TestResult):
+    """A pyunit TestResult interface implementation for making statistics.
+    
+    :ivar total_tests: The total tests seen.
+    :ivar passed_tests: The tests that passed.
+    :ivar failed_tests: The tests that failed.
+    :ivar seen_tags: The tags seen across all tests.
+    """
 
+    def __init__(self, stream):
+        """Create a TestResultStats which outputs to stream."""
+        unittest.TestResult.__init__(self)
+        self._stream = stream
+        self.failed_tests = 0
+        self.skipped_tests = 0
+        self.seen_tags = set()
+
+    @property
+    def total_tests(self):
+        return self.testsRun
+
+    def addError(self, test, err, details=None):
+        self.failed_tests += 1
+
+    def addFailure(self, test, err, details=None):
+        self.failed_tests += 1
+
+    def addSkip(self, test, reason, details=None):
+        self.skipped_tests += 1
+
+    def formatStats(self):
+        self._stream.write("Total tests:   %5d\n" % self.total_tests)
+        self._stream.write("Passed tests:  %5d\n" % self.passed_tests)
+        self._stream.write("Failed tests:  %5d\n" % self.failed_tests)
+        self._stream.write("Skipped tests: %5d\n" % self.skipped_tests)
+        tags = sorted(self.seen_tags)
+        self._stream.write("Seen tags: %s\n" % (", ".join(tags)))
+
+    @property
+    def passed_tests(self):
+        return self.total_tests - self.failed_tests - self.skipped_tests
+
+    def tags(self, new_tags, gone_tags):
+        """Accumulate the seen tags."""
+        self.seen_tags.update(new_tags)
+
+    def wasSuccessful(self):
+        """Tells whether or not this result was a success"""
+        return self.failed_tests == 0
diff --git a/lib/subunit/python/subunit/chunked.py b/lib/subunit/python/subunit/chunked.py
new file mode 100644
index 0000000000..82e4b0ddfc
--- /dev/null
+++ b/lib/subunit/python/subunit/chunked.py
@@ -0,0 +1,164 @@
+#
+#  subunit: extensions to python unittest to get test results from subprocesses.
+#  Copyright (C) 2005  Robert Collins <robertc@robertcollins.net>
+#
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
+#
+
+"""Encoder/decoder for http style chunked encoding."""
+
+class Decoder(object):
+    """Decode chunked content to a byte stream."""
+
+    def __init__(self, output):
+        """Create a decoder decoding to output.
+
+        :param output: A file-like object. Bytes written to the Decoder are
+            decoded to strip off the chunking and written to the output.
+            Up to a full write worth of data or a single control line  may be
+            buffered (whichever is larger). The close method should be called
+            when no more data is available, to detect short streams; the
+            write method will return none-None when the end of a stream is
+            detected.
+        """
+        self.output = output
+        self.buffered_bytes = []
+        self.state = self._read_length
+        self.body_length = 0
+
+    def close(self):
+        """Close the decoder.
+
+        :raises ValueError: If the stream is incomplete ValueError is raised.
+        """
+        if self.state != self._finished:
+            raise ValueError("incomplete stream")
+
+    def _finished(self):
+        """Finished reading, return any remaining bytes."""
+        if self.buffered_bytes:
+            buffered_bytes = self.buffered_bytes
+            self.buffered_bytes = []
+            return ''.join(buffered_bytes)
+        else:
+            raise ValueError("stream is finished")
+
+    def _read_body(self):
+        """Pass body bytes to the output."""
+        while self.body_length and self.buffered_bytes:
+            if self.body_length >= len(self.buffered_bytes[0]):
+                self.output.write(self.buffered_bytes[0])
+                self.body_length -= len(self.buffered_bytes[0])
+                del self.buffered_bytes[0]
+                # No more data available.
+                if not self.body_length:
+                    self.state = self._read_length
+            else:
+                self.output.write(self.buffered_bytes[0][:self.body_length])
+                self.buffered_bytes[0] = \
+                    self.buffered_bytes[0][self.body_length:]
+                self.body_length = 0
+                self.state = self._read_length
+                return self.state()
+
+    def _read_length(self):
+        """Try to decode a length from the bytes."""
+        count = -1
+        match_chars = "0123456789abcdefABCDEF\r\n"
+        count_chars = []
+        for bytes in self.buffered_bytes:
+            for byte in bytes:
+                if byte not in match_chars:
+                    break
+                count_chars.append(byte)
+                if byte == '\n':
+                    break
+        if not count_chars:
+            return
+        if count_chars[-1][-1] != '\n':
+            return
+        count_str = ''.join(count_chars)
+        self.body_length = int(count_str[:-2], 16)
+        excess_bytes = len(count_str)
+        while excess_bytes:
+            if excess_bytes >= len(self.buffered_bytes[0]):
+                excess_bytes -= len(self.buffered_bytes[0])
+                del self.buffered_bytes[0]
+            else:
+                self.buffered_bytes[0] = self.buffered_bytes[0][excess_bytes:]
+                excess_bytes = 0
+        if not self.body_length:
+            self.state = self._finished
+            if not self.buffered_bytes:
+                # May not call into self._finished with no buffered data.
+                return ''
+        else:
+            self.state = self._read_body
+        return self.state()
+
+    def write(self, bytes):
+        """Decode bytes to the output stream.
+        
+        :raises ValueError: If the stream has already seen the end of file
+            marker.
+        :returns: None, or the excess bytes beyond the end of file marker.
+        """
+        if bytes:
+            self.buffered_bytes.append(bytes)
+        return self.state()
+
+
+class Encoder(object):
+    """Encode content to a stream using HTTP Chunked coding."""
+
+    def __init__(self, output):
+        """Create an encoder encoding to output.
+
+        :param output: A file-like object. Bytes written to the Encoder
+            will be encoded using HTTP chunking. Small writes may be buffered
+            and the ``close`` method must be called to finish the stream.
+        """
+        self.output = output
+        self.buffered_bytes = []
+        self.buffer_size = 0
+
+    def flush(self, extra_len=0):
+        """Flush the encoder to the output stream.
+        
+        :param extra_len: Increase the size of the chunk by this many bytes
+            to allow for a subsequent write.
+        """
+        if not self.buffer_size and not extra_len:
+            return
+        buffered_bytes = self.buffered_bytes
+        buffer_size = self.buffer_size
+        self.buffered_bytes = []
+        self.buffer_size = 0
+        self.output.write("%X\r\n" % (buffer_size + extra_len))
+        if buffer_size:
+            self.output.write(''.join(buffered_bytes))
+        return True
+
+    def write(self, bytes):
+        """Encode bytes to the output stream."""
+        bytes_len = len(bytes)
+        if self.buffer_size + bytes_len >= 65536:
+            self.flush(bytes_len)
+            self.output.write(bytes)
+        else:
+            self.buffered_bytes.append(bytes)
+            self.buffer_size += bytes_len
+
+    def close(self):
+        """Finish the stream. This does not close the output stream."""
+        self.flush()
+        self.output.write("0\r\n")
diff --git a/lib/subunit/python/subunit/details.py b/lib/subunit/python/subunit/details.py
new file mode 100644
index 0000000000..65a04046d9
--- /dev/null
+++ b/lib/subunit/python/subunit/details.py
@@ -0,0 +1,109 @@
+#
+#  subunit: extensions to Python unittest to get test results from subprocesses.
+#  Copyright (C) 2005  Robert Collins <robertc@robertcollins.net>
+#
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
+#
+
+"""Handlers for outcome details."""
+
+from cStringIO import StringIO
+
+from testtools import content, content_type
+
+import chunked
+
+
+class DetailsParser(object):
+    """Base class/API reference for details parsing."""
+
+
+class SimpleDetailsParser(DetailsParser):
+    """Parser for single-part [] delimited details."""
+
+    def __init__(self, state):
+        self._message = ""
+        self._state = state
+
+    def lineReceived(self, line):
+        if line == "]\n":
+            self._state.endDetails()
+            return
+        if line[0:2] == " ]":
+            # quoted ] start
+            self._message += line[1:]
+        else:
+            self._message += line
+
+    def get_details(self, style=None):
+        result = {}
+        if not style:
+            result['traceback'] = content.Content(
+                content_type.ContentType("text", "x-traceback"),
+                lambda:[self._message])
+        else:
+            if style == 'skip':
+                name = 'reason'
+            else:
+                name = 'message'
+            result[name] = content.Content(
+                content_type.ContentType("text", "plain"),
+                lambda:[self._message])
+        return result
+
+    def get_message(self):
+        return self._message
+
+
+class MultipartDetailsParser(DetailsParser):
+    """Parser for multi-part [] surrounded MIME typed chunked details."""
+
+    def __init__(self, state):
+        self._state = state
+        self._details = {}
+        self._parse_state = self._look_for_content
+
+    def _look_for_content(self, line):
+        if line == "]\n":
+            self._state.endDetails()
+            return
+        # TODO error handling
+        field, value = line[:-1].split(' ', 1)
+        main, sub = value.split('/')
+        self._content_type = content_type.ContentType(main, sub)
+        self._parse_state = self._get_name
+
+    def _get_name(self, line):
+        self._name = line[:-1]
+        self._body = StringIO()
+        self._chunk_parser = chunked.Decoder(self._body)
+        self._parse_state = self._feed_chunks
+
+    def _feed_chunks(self, line):
+        residue = self._chunk_parser.write(line)
+        if residue is not None:
+            # Line based use always ends on no residue.
+            assert residue == ''
+            body = self._body
+            self._details[self._name] = content.Content(
+                self._content_type, lambda:[body.getvalue()])
+            self._chunk_parser.close()
+            self._parse_state = self._look_for_content
+
+    def get_details(self, for_skip=False):
+        return self._details
+
+    def get_message(self):
+        return None
+
+    def lineReceived(self, line):
+        self._parse_state(line)
diff --git a/lib/subunit/python/subunit/iso8601.py b/lib/subunit/python/subunit/iso8601.py
new file mode 100644
index 0000000000..93c92fb516
--- /dev/null
+++ b/lib/subunit/python/subunit/iso8601.py
@@ -0,0 +1,123 @@
+# Copyright (c) 2007 Michael Twomey
+# 
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish,
+# distribute, sublicense, and/or sell copies of the Software, and to
+# permit persons to whom the Software is furnished to do so, subject to
+# the following conditions:
+# 
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+# 
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+# IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+# CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+# TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+"""ISO 8601 date time string parsing
+
+Basic usage:
+>>> import iso8601
+>>> iso8601.parse_date("2007-01-25T12:00:00Z")
+datetime.datetime(2007, 1, 25, 12, 0, tzinfo=<iso8601.iso8601.Utc ...>)
+>>>
+
+"""
+
+from datetime import datetime, timedelta, tzinfo
+import re
+
+__all__ = ["parse_date", "ParseError"]
+
+# Adapted from http://delete.me.uk/2005/03/iso8601.html
+ISO8601_REGEX = re.compile(r"(?P<year>[0-9]{4})(-(?P<month>[0-9]{1,2})(-(?P<day>[0-9]{1,2})"
+    r"((?P<separator>.)(?P<hour>[0-9]{2}):(?P<minute>[0-9]{2})(:(?P<second>[0-9]{2})(\.(?P<fraction>[0-9]+))?)?"
+    r"(?P<timezone>Z|(([-+])([0-9]{2}):([0-9]{2})))?)?)?)?"
+)
+TIMEZONE_REGEX = re.compile("(?P<prefix>[+-])(?P<hours>[0-9]{2}).(?P<minutes>[0-9]{2})")
+
+class ParseError(Exception):
+    """Raised when there is a problem parsing a date string"""
+
+# Yoinked from python docs
+ZERO = timedelta(0)
+class Utc(tzinfo):
+    """UTC
+    
+    """
+    def utcoffset(self, dt):
+        return ZERO
+
+    def tzname(self, dt):
+        return "UTC"
+
+    def dst(self, dt):
+        return ZERO
+UTC = Utc()
+
+class FixedOffset(tzinfo):
+    """Fixed offset in hours and minutes from UTC
+    
+    """
+    def __init__(self, offset_hours, offset_minutes, name):
+        self.__offset = timedelta(hours=offset_hours, minutes=offset_minutes)
+        self.__name = name
+
+    def utcoffset(self, dt):
+        return self.__offset
+
+    def tzname(self, dt):
+        return self.__name
+
+    def dst(self, dt):
+        return ZERO
+    
+    def __repr__(self):
+        return "<FixedOffset %r>" % self.__name
+
+def parse_timezone(tzstring, default_timezone=UTC):
+    """Parses ISO 8601 time zone specs into tzinfo offsets
+    
+    """
+    if tzstring == "Z":
+        return default_timezone
+    # This isn't strictly correct, but it's common to encounter dates without
+    # timezones so I'll assume the default (which defaults to UTC).
+    # Addresses issue 4.
+    if tzstring is None:
+        return default_timezone
+    m = TIMEZONE_REGEX.match(tzstring)
+    prefix, hours, minutes = m.groups()
+    hours, minutes = int(hours), int(minutes)
+    if prefix == "-":
+        hours = -hours
+        minutes = -minutes
+    return FixedOffset(hours, minutes, tzstring)
+
+def parse_date(datestring, default_timezone=UTC):
+    """Parses ISO 8601 dates into datetime objects
+    
+    The timezone is parsed from the date string. However it is quite common to
+    have dates without a timezone (not strictly correct). In this case the
+    default timezone specified in default_timezone is used. This is UTC by
+    default.
+    """
+    if not isinstance(datestring, basestring):
+        raise ParseError("Expecting a string %r" % datestring)
+    m = ISO8601_REGEX.match(datestring)
+    if not m:
+        raise ParseError("Unable to parse date string %r" % datestring)
+    groups = m.groupdict()
+    tz = parse_timezone(groups["timezone"], default_timezone=default_timezone)
+    if groups["fraction"] is None:
+        groups["fraction"] = 0
+    else:
+        groups["fraction"] = int(float("0.%s" % groups["fraction"]) * 1e6)
+    return datetime(int(groups["year"]), int(groups["month"]), int(groups["day"]),
+        int(groups["hour"]), int(groups["minute"]), int(groups["second"]),
+        int(groups["fraction"]), tz)
diff --git a/lib/subunit/python/subunit/progress_model.py b/lib/subunit/python/subunit/progress_model.py
new file mode 100644
index 0000000000..3a6af89a33
--- /dev/null
+++ b/lib/subunit/python/subunit/progress_model.py
@@ -0,0 +1,106 @@
+#
+#  subunit: extensions to Python unittest to get test results from subprocesses.
+#  Copyright (C) 2009  Robert Collins <robertc@robertcollins.net>
+#
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
+#
+
+"""Support for dealing with progress state."""
+
+class ProgressModel(object):
+    """A model of progress indicators as subunit defines it.
+    
+    Instances of this class represent a single logical operation that is
+    progressing. The operation may have many steps, and some of those steps may
+    supply their own progress information. ProgressModel uses a nested concept
+    where the overall state can be pushed, creating new starting state, and
+    later pushed to return to the prior state. Many user interfaces will want
+    to display an overall summary though, and accordingly the pos() and width()
+    methods return overall summary information rather than information on the
+    current subtask.
+
+    The default state is 0/0 - indicating that the overall progress is unknown.
+    Anytime the denominator of pos/width is 0, rendering of a ProgressModel
+    should should take this into consideration.
+
+    :ivar: _tasks. This private attribute stores the subtasks. Each is a tuple:
+        pos, width, overall_numerator, overall_denominator. The overall fields
+        store the calculated overall numerator and denominator for the state
+        that was pushed.
+    """
+
+    def __init__(self):
+        """Create a ProgressModel.
+        
+        The new model has no progress data at all - it will claim a summary
+        width of zero and position of 0.
+        """
+        self._tasks = []
+        self.push()
+
+    def adjust_width(self, offset):
+        """Adjust the with of the current subtask."""
+        self._tasks[-1][1] += offset
+
+    def advance(self):
+        """Advance the current subtask."""
+        self._tasks[-1][0] += 1
+
+    def pop(self):
+        """Pop a subtask off the ProgressModel.
+
+        See push for a description of how push and pop work.
+        """
+        self._tasks.pop()
+
+    def pos(self):
+        """Return how far through the operation has progressed."""
+        if not self._tasks:
+            return 0
+        task = self._tasks[-1]
+        if len(self._tasks) > 1:
+            # scale up the overall pos by the current task or preserve it if
+            # no current width is known.
+            offset = task[2] * (task[1] or 1)
+        else:
+            offset = 0
+        return offset + task[0]
+
+    def push(self):
+        """Push a new subtask.
+
+        After pushing a new subtask, the overall progress hasn't changed. Calls
+        to adjust_width, advance, set_width will only after the progress within
+        the range that calling 'advance' would have before - the subtask
+        represents progressing one step in the earlier task.
+
+        Call pop() to restore the progress model to the state before push was
+        called.
+        """
+        self._tasks.append([0, 0, self.pos(), self.width()])
+
+    def set_width(self, width):
+        """Set the width of the current subtask."""
+        self._tasks[-1][1] = width
+
+    def width(self):
+        """Return the total width of the operation."""
+        if not self._tasks:
+            return 0
+        task = self._tasks[-1]
+        if len(self._tasks) > 1:
+            # scale up the overall width by the current task or preserve it if
+            # no current width is known.
+            return task[3] * (task[1] or 1)
+        else:
+            return task[1]
+
diff --git a/lib/subunit/python/subunit/run.py b/lib/subunit/python/subunit/run.py
new file mode 100755
index 0000000000..2b90791d69
--- /dev/null
+++ b/lib/subunit/python/subunit/run.py
@@ -0,0 +1,46 @@
+#!/usr/bin/python
+#
+# Simple subunit testrunner for python
+# Copyright (C) Jelmer Vernooij <jelmer@samba.org> 2007
+#   
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
+#
+
+"""Run a unittest testcase reporting results as Subunit.
+
+  $ python -m subunit.run mylib.tests.test_suite
+"""
+
+import sys
+
+from subunit import TestProtocolClient
+
+
+class SubunitTestRunner(object):
+    def __init__(self, stream=sys.stdout):
+        self.stream = stream
+
+    def run(self, test):
+        "Run the given test case or test suite."
+        result = TestProtocolClient(self.stream)
+        test(result)
+        return result
+
+
+if __name__ == '__main__':
+    import optparse
+    from unittest import TestProgram
+    parser = optparse.OptionParser(__doc__)
+    args = parser.parse_args()[1]
+    runner = SubunitTestRunner()
+    program = TestProgram(module=None, argv=[sys.argv[0]] + args,
+                          testRunner=runner)
diff --git a/lib/subunit/python/subunit/test_results.py b/lib/subunit/python/subunit/test_results.py
new file mode 100644
index 0000000000..4ccc2aab35
--- /dev/null
+++ b/lib/subunit/python/subunit/test_results.py
@@ -0,0 +1,334 @@
+#
+#  subunit: extensions to Python unittest to get test results from subprocesses.
+#  Copyright (C) 2009  Robert Collins <robertc@robertcollins.net>
+#
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
+#
+
+"""TestResult helper classes used to by subunit."""
+
+import datetime
+
+import iso8601
+import testtools
+
+import subunit
+
+
+# NOT a TestResult, because we are implementing the interface, not inheriting
+# it.
+class TestResultDecorator(object):
+    """General pass-through decorator.
+
+    This provides a base that other TestResults can inherit from to 
+    gain basic forwarding functionality. It also takes care of 
+    handling the case where the target doesn't support newer methods
+    or features by degrading them.
+    """
+
+    def __init__(self, decorated):
+        """Create a TestResultDecorator forwarding to decorated."""
+        # Make every decorator degrade gracefully.
+        self.decorated = testtools.ExtendedToOriginalDecorator(decorated)
+
+    def startTest(self, test):
+        return self.decorated.startTest(test)
+
+    def startTestRun(self):
+        return self.decorated.startTestRun()
+
+    def stopTest(self, test):
+        return self.decorated.stopTest(test)
+
+    def stopTestRun(self):
+        return self.decorated.stopTestRun()
+
+    def addError(self, test, err=None, details=None):
+        return self.decorated.addError(test, err, details=details)
+
+    def addFailure(self, test, err=None, details=None):
+        return self.decorated.addFailure(test, err, details=details)
+
+    def addSuccess(self, test, details=None):
+        return self.decorated.addSuccess(test, details=details)
+
+    def addSkip(self, test, reason=None, details=None):
+        return self.decorated.addSkip(test, reason, details=details)
+
+    def addExpectedFailure(self, test, err=None, details=None):
+        return self.decorated.addExpectedFailure(test, err, details=details)
+
+    def addUnexpectedSuccess(self, test, details=None):
+        return self.decorated.addUnexpectedSuccess(test, details=details)
+
+    def progress(self, offset, whence):
+        return self.decorated.progress(offset, whence)
+
+    def wasSuccessful(self):
+        return self.decorated.wasSuccessful()
+
+    @property
+    def shouldStop(self):
+        return self.decorated.shouldStop
+
+    def stop(self):
+        return self.decorated.stop()
+
+    def tags(self, gone_tags, new_tags):
+        return self.decorated.time(gone_tags, new_tags)
+
+    def time(self, a_datetime):
+        return self.decorated.time(a_datetime)
+
+
+class HookedTestResultDecorator(TestResultDecorator):
+    """A TestResult which calls a hook on every event."""
+
+    def __init__(self, decorated):
+        self.super = super(HookedTestResultDecorator, self)
+        self.super.__init__(decorated)
+
+    def startTest(self, test):
+        self._before_event()
+        return self.super.startTest(test)
+
+    def startTestRun(self):
+        self._before_event()
+        return self.super.startTestRun()
+
+    def stopTest(self, test):
+        self._before_event()
+        return self.super.stopTest(test)
+
+    def stopTestRun(self):
+        self._before_event()
+        return self.super.stopTestRun()
+
+    def addError(self, test, err=None, details=None):
+        self._before_event()
+        return self.super.addError(test, err, details=details)
+
+    def addFailure(self, test, err=None, details=None):
+        self._before_event()
+        return self.super.addFailure(test, err, details=details)
+
+    def addSuccess(self, test, details=None):
+        self._before_event()
+        return self.super.addSuccess(test, details=details)
+
+    def addSkip(self, test, reason=None, details=None):
+        self._before_event()
+        return self.super.addSkip(test, reason, details=details)
+
+    def addExpectedFailure(self, test, err=None, details=None):
+        self._before_event()
+        return self.super.addExpectedFailure(test, err, details=details)
+
+    def addUnexpectedSuccess(self, test, details=None):
+        self._before_event()
+        return self.super.addUnexpectedSuccess(test, details=details)
+
+    def progress(self, offset, whence):
+        self._before_event()
+        return self.super.progress(offset, whence)
+
+    def wasSuccessful(self):
+        self._before_event()
+        return self.super.wasSuccessful()
+
+    @property
+    def shouldStop(self):
+        self._before_event()
+        return self.super.shouldStop
+
+    def stop(self):
+        self._before_event()
+        return self.super.stop()
+
+    def time(self, a_datetime):
+        self._before_event()
+        return self.super.time(a_datetime)
+
+
+class AutoTimingTestResultDecorator(HookedTestResultDecorator):
+    """Decorate a TestResult to add time events to a test run.
+
+    By default this will cause a time event before every test event,
+    but if explicit time data is being provided by the test run, then
+    this decorator will turn itself off to prevent causing confusion.
+    """
+
+    def __init__(self, decorated):
+        self._time = None
+        super(AutoTimingTestResultDecorator, self).__init__(decorated)
+
+    def _before_event(self):
+        time = self._time
+        if time is not None:
+            return
+        time = datetime.datetime.utcnow().replace(tzinfo=iso8601.Utc())
+        self.decorated.time(time)
+
+    def progress(self, offset, whence):
+        return self.decorated.progress(offset, whence)
+
+    @property
+    def shouldStop(self):
+        return self.decorated.shouldStop
+
+    def time(self, a_datetime):
+        """Provide a timestamp for the current test activity.
+
+        :param a_datetime: If None, automatically add timestamps before every
+            event (this is the default behaviour if time() is not called at
+            all).  If not None, pass the provided time onto the decorated
+            result object and disable automatic timestamps.
+        """
+        self._time = a_datetime
+        return self.decorated.time(a_datetime)
+
+
+class TestResultFilter(TestResultDecorator):
+    """A pyunit TestResult interface implementation which filters tests.
+
+    Tests that pass the filter are handed on to another TestResult instance
+    for further processing/reporting. To obtain the filtered results, 
+    the other instance must be interrogated.
+
+    :ivar result: The result that tests are passed to after filtering.
+    :ivar filter_predicate: The callback run to decide whether to pass 
+        a result.
+    """
+
+    def __init__(self, result, filter_error=False, filter_failure=False,
+        filter_success=True, filter_skip=False,
+        filter_predicate=None):
+        """Create a FilterResult object filtering to result.
+        
+        :param filter_error: Filter out errors.
+        :param filter_failure: Filter out failures.
+        :param filter_success: Filter out successful tests.
+        :param filter_skip: Filter out skipped tests.
+        :param filter_predicate: A callable taking (test, outcome, err,
+            details) and returning True if the result should be passed
+            through.  err and details may be none if no error or extra
+            metadata is available. outcome is the name of the outcome such
+            as 'success' or 'failure'.
+        """
+        TestResultDecorator.__init__(self, result)
+        self._filter_error = filter_error
+        self._filter_failure = filter_failure
+        self._filter_success = filter_success
+        self._filter_skip = filter_skip
+        if filter_predicate is None:
+            filter_predicate = lambda test, outcome, err, details: True
+        self.filter_predicate = filter_predicate
+        # The current test (for filtering tags)
+        self._current_test = None
+        # Has the current test been filtered (for outputting test tags)
+        self._current_test_filtered = None
+        # The (new, gone) tags for the current test.
+        self._current_test_tags = None
+        
+    def addError(self, test, err=None, details=None):
+        if (not self._filter_error and 
+            self.filter_predicate(test, 'error', err, details)):
+            self.decorated.startTest(test)
+            self.decorated.addError(test, err, details=details)
+        else:
+            self._filtered()
+
+    def addFailure(self, test, err=None, details=None):
+        if (not self._filter_failure and
+            self.filter_predicate(test, 'failure', err, details)):
+            self.decorated.startTest(test)
+            self.decorated.addFailure(test, err, details=details)
+        else:
+            self._filtered()
+
+    def addSkip(self, test, reason=None, details=None):
+        if (not self._filter_skip and
+            self.filter_predicate(test, 'skip', reason, details)):
+            self.decorated.startTest(test)
+            self.decorated.addSkip(test, reason, details=details)
+        else:
+            self._filtered()
+
+    def addSuccess(self, test, details=None):
+        if (not self._filter_success and
+            self.filter_predicate(test, 'success', None, details)):
+            self.decorated.startTest(test)
+            self.decorated.addSuccess(test, details=details)
+        else:
+            self._filtered()
+
+    def addExpectedFailure(self, test, err=None, details=None):
+        if self.filter_predicate(test, 'expectedfailure', err, details):
+            self.decorated.startTest(test)
+            return self.decorated.addExpectedFailure(test, err,
+                details=details)
+        else:
+            self._filtered()
+
+    def addUnexpectedSuccess(self, test, details=None):
+        self.decorated.startTest(test)
+        return self.decorated.addUnexpectedSuccess(test, details=details)
+
+    def _filtered(self):
+        self._current_test_filtered = True
+
+    def startTest(self, test):
+        """Start a test.
+        
+        Not directly passed to the client, but used for handling of tags
+        correctly.
+        """
+        self._current_test = test
+        self._current_test_filtered = False
+        self._current_test_tags = set(), set()
+    
+    def stopTest(self, test):
+        """Stop a test.
+        
+        Not directly passed to the client, but used for handling of tags
+        correctly.
+        """
+        if not self._current_test_filtered:
+            # Tags to output for this test.
+            if self._current_test_tags[0] or self._current_test_tags[1]:
+                self.decorated.tags(*self._current_test_tags)
+            self.decorated.stopTest(test)
+        self._current_test = None
+        self._current_test_filtered = None
+        self._current_test_tags = None
+
+    def tags(self, new_tags, gone_tags):
+        """Handle tag instructions.
+
+        Adds and removes tags as appropriate. If a test is currently running,
+        tags are not affected for subsequent tests.
+        
+        :param new_tags: Tags to add,
+        :param gone_tags: Tags to remove.
+        """
+        if self._current_test is not None:
+            # gather the tags until the test stops.
+            self._current_test_tags[0].update(new_tags)
+            self._current_test_tags[0].difference_update(gone_tags)
+            self._current_test_tags[1].update(gone_tags)
+            self._current_test_tags[1].difference_update(new_tags)
+        return self.decorated.tags(new_tags, gone_tags)
+
+    def id_to_orig_id(self, id):
+        if id.startswith("subunit.RemotedTestCase."):
+            return id[len("subunit.RemotedTestCase."):]
+        return id
diff --git a/lib/subunit/python/subunit/tests/__init__.py b/lib/subunit/python/subunit/tests/__init__.py
index 544d0e704f..a78cec8572 100644
--- a/lib/subunit/python/subunit/tests/__init__.py
+++ b/lib/subunit/python/subunit/tests/__init__.py
@@ -2,24 +2,40 @@
 #  subunit: extensions to python unittest to get test results from subprocesses.
 #  Copyright (C) 2005  Robert Collins <robertc@robertcollins.net>
 #
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
 #
 
-from subunit.tests import TestUtil, test_test_protocol
+from subunit.tests import (
+    TestUtil,
+    test_chunked,
+    test_details,
+    test_progress_model,
+    test_subunit_filter,
+    test_subunit_stats,
+    test_subunit_tags,
+    test_tap2subunit,
+    test_test_protocol,
+    test_test_results,
+    )
 
 def test_suite():
     result = TestUtil.TestSuite()
+    result.addTest(test_chunked.test_suite())
+    result.addTest(test_details.test_suite())
+    result.addTest(test_progress_model.test_suite())
+    result.addTest(test_test_results.test_suite())
     result.addTest(test_test_protocol.test_suite())
+    result.addTest(test_tap2subunit.test_suite())
+    result.addTest(test_subunit_filter.test_suite())
+    result.addTest(test_subunit_tags.test_suite())
+    result.addTest(test_subunit_stats.test_suite())
     return result
diff --git a/lib/subunit/python/subunit/tests/sample-script.py b/lib/subunit/python/subunit/tests/sample-script.py
index 223d2f5d9f..0ee019ae4a 100755
--- a/lib/subunit/python/subunit/tests/sample-script.py
+++ b/lib/subunit/python/subunit/tests/sample-script.py
@@ -1,5 +1,12 @@
 #!/usr/bin/env python
 import sys
+if len(sys.argv) == 2:
+    # subunit.tests.test_test_protocol.TestExecTestCase.test_sample_method_args 
+    # uses this code path to be sure that the arguments were passed to
+    # sample-script.py
+    print "test fail"
+    print "error fail"
+    sys.exit(0)
 print "test old mcdonald"
 print "success old mcdonald"
 print "test bing crosby"
diff --git a/lib/subunit/python/subunit/tests/test_chunked.py b/lib/subunit/python/subunit/tests/test_chunked.py
new file mode 100644
index 0000000000..a24e31e0c2
--- /dev/null
+++ b/lib/subunit/python/subunit/tests/test_chunked.py
@@ -0,0 +1,127 @@
+#
+#  subunit: extensions to python unittest to get test results from subprocesses.
+#  Copyright (C) 2005  Robert Collins <robertc@robertcollins.net>
+#
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
+#
+
+from cStringIO import StringIO
+import unittest
+
+import subunit.chunked
+
+
+def test_suite():
+    loader = subunit.tests.TestUtil.TestLoader()
+    result = loader.loadTestsFromName(__name__)
+    return result
+
+
+class TestDecode(unittest.TestCase):
+
+    def setUp(self):
+        unittest.TestCase.setUp(self)
+        self.output = StringIO()
+        self.decoder = subunit.chunked.Decoder(self.output)
+
+    def test_close_read_length_short_errors(self):
+        self.assertRaises(ValueError, self.decoder.close)
+
+    def test_close_body_short_errors(self):
+        self.assertEqual(None, self.decoder.write('2\r\na'))
+        self.assertRaises(ValueError, self.decoder.close)
+
+    def test_close_body_buffered_data_errors(self):
+        self.assertEqual(None, self.decoder.write('2\r'))
+        self.assertRaises(ValueError, self.decoder.close)
+
+    def test_close_after_finished_stream_safe(self):
+        self.assertEqual(None, self.decoder.write('2\r\nab'))
+        self.assertEqual('', self.decoder.write('0\r\n'))
+        self.decoder.close()
+
+    def test_decode_nothing(self):
+        self.assertEqual('', self.decoder.write('0\r\n'))
+        self.assertEqual('', self.output.getvalue())
+
+    def test_decode_serialised_form(self):
+        self.assertEqual(None, self.decoder.write("F\r\n"))
+        self.assertEqual(None, self.decoder.write("serialised\n"))
+        self.assertEqual('', self.decoder.write("form0\r\n"))
+
+    def test_decode_short(self):
+        self.assertEqual('', self.decoder.write('3\r\nabc0\r\n'))
+        self.assertEqual('abc', self.output.getvalue())
+
+    def test_decode_combines_short(self):
+        self.assertEqual('', self.decoder.write('6\r\nabcdef0\r\n'))
+        self.assertEqual('abcdef', self.output.getvalue())
+
+    def test_decode_excess_bytes_from_write(self):
+        self.assertEqual('1234', self.decoder.write('3\r\nabc0\r\n1234'))
+        self.assertEqual('abc', self.output.getvalue())
+
+    def test_decode_write_after_finished_errors(self):
+        self.assertEqual('1234', self.decoder.write('3\r\nabc0\r\n1234'))
+        self.assertRaises(ValueError, self.decoder.write, '')
+
+    def test_decode_hex(self):
+        self.assertEqual('', self.decoder.write('A\r\n12345678900\r\n'))
+        self.assertEqual('1234567890', self.output.getvalue())
+
+    def test_decode_long_ranges(self):
+        self.assertEqual(None, self.decoder.write('10000\r\n'))
+        self.assertEqual(None, self.decoder.write('1' * 65536))
+        self.assertEqual(None, self.decoder.write('10000\r\n'))
+        self.assertEqual(None, self.decoder.write('2' * 65536))
+        self.assertEqual('', self.decoder.write('0\r\n'))
+        self.assertEqual('1' * 65536 + '2' * 65536, self.output.getvalue())
+
+
+class TestEncode(unittest.TestCase):
+
+    def setUp(self):
+        unittest.TestCase.setUp(self)
+        self.output = StringIO()
+        self.encoder = subunit.chunked.Encoder(self.output)
+
+    def test_encode_nothing(self):
+        self.encoder.close()
+        self.assertEqual('0\r\n', self.output.getvalue())
+
+    def test_encode_empty(self):
+        self.encoder.write('')
+        self.encoder.close()
+        self.assertEqual('0\r\n', self.output.getvalue())
+
+    def test_encode_short(self):
+        self.encoder.write('abc')
+        self.encoder.close()
+        self.assertEqual('3\r\nabc0\r\n', self.output.getvalue())
+
+    def test_encode_combines_short(self):
+        self.encoder.write('abc')
+        self.encoder.write('def')
+        self.encoder.close()
+        self.assertEqual('6\r\nabcdef0\r\n', self.output.getvalue())
+
+    def test_encode_over_9_is_in_hex(self):
+        self.encoder.write('1234567890')
+        self.encoder.close()
+        self.assertEqual('A\r\n12345678900\r\n', self.output.getvalue())
+
+    def test_encode_long_ranges_not_combined(self):
+        self.encoder.write('1' * 65536)
+        self.encoder.write('2' * 65536)
+        self.encoder.close()
+        self.assertEqual('10000\r\n' + '1' * 65536 + '10000\r\n' +
+            '2' * 65536 + '0\r\n', self.output.getvalue())
diff --git a/lib/subunit/python/subunit/tests/test_details.py b/lib/subunit/python/subunit/tests/test_details.py
new file mode 100644
index 0000000000..2700d4afc7
--- /dev/null
+++ b/lib/subunit/python/subunit/tests/test_details.py
@@ -0,0 +1,110 @@
+#
+#  subunit: extensions to python unittest to get test results from subprocesses.
+#  Copyright (C) 2005  Robert Collins <robertc@robertcollins.net>
+#
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
+#
+
+from cStringIO import StringIO
+import unittest
+
+import subunit.tests
+from subunit import content, content_type, details
+
+
+def test_suite():
+    loader = subunit.tests.TestUtil.TestLoader()
+    result = loader.loadTestsFromName(__name__)
+    return result
+
+
+class TestSimpleDetails(unittest.TestCase):
+
+    def test_lineReceived(self):
+        parser = details.SimpleDetailsParser(None)
+        parser.lineReceived("foo\n")
+        parser.lineReceived("bar\n")
+        self.assertEqual("foo\nbar\n", parser._message)
+
+    def test_lineReceived_escaped_bracket(self):
+        parser = details.SimpleDetailsParser(None)
+        parser.lineReceived("foo\n")
+        parser.lineReceived(" ]are\n")
+        parser.lineReceived("bar\n")
+        self.assertEqual("foo\n]are\nbar\n", parser._message)
+
+    def test_get_message(self):
+        parser = details.SimpleDetailsParser(None)
+        self.assertEqual("", parser.get_message())
+
+    def test_get_details(self):
+        parser = details.SimpleDetailsParser(None)
+        traceback = ""
+        expected = {}
+        expected['traceback'] = content.Content(
+            content_type.ContentType("text", "x-traceback"),
+            lambda:[""])
+        found = parser.get_details()
+        self.assertEqual(expected.keys(), found.keys())
+        self.assertEqual(expected['traceback'].content_type,
+            found['traceback'].content_type)
+        self.assertEqual(''.join(expected['traceback'].iter_bytes()),
+            ''.join(found['traceback'].iter_bytes()))
+
+    def test_get_details_skip(self):
+        parser = details.SimpleDetailsParser(None)
+        traceback = ""
+        expected = {}
+        expected['reason'] = content.Content(
+            content_type.ContentType("text", "plain"),
+            lambda:[""])
+        found = parser.get_details("skip")
+        self.assertEqual(expected, found)
+
+    def test_get_details_success(self):
+        parser = details.SimpleDetailsParser(None)
+        traceback = ""
+        expected = {}
+        expected['message'] = content.Content(
+            content_type.ContentType("text", "plain"),
+            lambda:[""])
+        found = parser.get_details("success")
+        self.assertEqual(expected, found)
+
+
+class TestMultipartDetails(unittest.TestCase):
+
+    def test_get_message_is_None(self):
+        parser = details.MultipartDetailsParser(None)
+        self.assertEqual(None, parser.get_message())
+
+    def test_get_details(self):
+        parser = details.MultipartDetailsParser(None)
+        self.assertEqual({}, parser.get_details())
+
+    def test_parts(self):
+        parser = details.MultipartDetailsParser(None)
+        parser.lineReceived("Content-Type: text/plain\n")
+        parser.lineReceived("something\n")
+        parser.lineReceived("F\r\n")
+        parser.lineReceived("serialised\n")
+        parser.lineReceived("form0\r\n")
+        expected = {}
+        expected['something'] = content.Content(
+            content_type.ContentType("text", "plain"),
+            lambda:["serialised\nform"])
+        found = parser.get_details()
+        self.assertEqual(expected.keys(), found.keys())
+        self.assertEqual(expected['something'].content_type,
+            found['something'].content_type)
+        self.assertEqual(''.join(expected['something'].iter_bytes()),
+            ''.join(found['something'].iter_bytes()))
diff --git a/lib/subunit/python/subunit/tests/test_progress_model.py b/lib/subunit/python/subunit/tests/test_progress_model.py
new file mode 100644
index 0000000000..76200c6107
--- /dev/null
+++ b/lib/subunit/python/subunit/tests/test_progress_model.py
@@ -0,0 +1,118 @@
+#
+#  subunit: extensions to Python unittest to get test results from subprocesses.
+#  Copyright (C) 2009  Robert Collins <robertc@robertcollins.net>
+#
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
+#
+
+import unittest
+
+import subunit
+from subunit.progress_model import ProgressModel
+
+
+class TestProgressModel(unittest.TestCase):
+
+    def assertProgressSummary(self, pos, total, progress):
+        """Assert that a progress model has reached a particular point."""
+        self.assertEqual(pos, progress.pos())
+        self.assertEqual(total, progress.width())
+
+    def test_new_progress_0_0(self):
+        progress = ProgressModel()
+        self.assertProgressSummary(0, 0, progress)
+
+    def test_advance_0_0(self):
+        progress = ProgressModel()
+        progress.advance()
+        self.assertProgressSummary(1, 0, progress)
+
+    def test_advance_1_0(self):
+        progress = ProgressModel()
+        progress.advance()
+        self.assertProgressSummary(1, 0, progress)
+
+    def test_set_width_absolute(self):
+        progress = ProgressModel()
+        progress.set_width(10)
+        self.assertProgressSummary(0, 10, progress)
+
+    def test_set_width_absolute_preserves_pos(self):
+        progress = ProgressModel()
+        progress.advance()
+        progress.set_width(2)
+        self.assertProgressSummary(1, 2, progress)
+
+    def test_adjust_width(self):
+        progress = ProgressModel()
+        progress.adjust_width(10)
+        self.assertProgressSummary(0, 10, progress)
+        progress.adjust_width(-10)
+        self.assertProgressSummary(0, 0, progress)
+
+    def test_adjust_width_preserves_pos(self):
+        progress = ProgressModel()
+        progress.advance()
+        progress.adjust_width(10)
+        self.assertProgressSummary(1, 10, progress)
+        progress.adjust_width(-10)
+        self.assertProgressSummary(1, 0, progress)
+
+    def test_push_preserves_progress(self):
+        progress = ProgressModel()
+        progress.adjust_width(3)
+        progress.advance()
+        progress.push()
+        self.assertProgressSummary(1, 3, progress)
+
+    def test_advance_advances_substack(self):
+        progress = ProgressModel()
+        progress.adjust_width(3)
+        progress.advance()
+        progress.push()
+        progress.adjust_width(1)
+        progress.advance()
+        self.assertProgressSummary(2, 3, progress)
+
+    def test_adjust_width_adjusts_substack(self):
+        progress = ProgressModel()
+        progress.adjust_width(3)
+        progress.advance()
+        progress.push()
+        progress.adjust_width(2)
+        progress.advance()
+        self.assertProgressSummary(3, 6, progress)
+
+    def test_set_width_adjusts_substack(self):
+        progress = ProgressModel()
+        progress.adjust_width(3)
+        progress.advance()
+        progress.push()
+        progress.set_width(2)
+        progress.advance()
+        self.assertProgressSummary(3, 6, progress)
+
+    def test_pop_restores_progress(self):
+        progress = ProgressModel()
+        progress.adjust_width(3)
+        progress.advance()
+        progress.push()
+        progress.adjust_width(1)
+        progress.advance()
+        progress.pop()
+        self.assertProgressSummary(1, 3, progress)
+
+
+def test_suite():
+    loader = subunit.tests.TestUtil.TestLoader()
+    result = loader.loadTestsFromName(__name__)
+    return result
diff --git a/lib/subunit/python/subunit/tests/test_subunit_filter.py b/lib/subunit/python/subunit/tests/test_subunit_filter.py
new file mode 100644
index 0000000000..3c65ed3afc
--- /dev/null
+++ b/lib/subunit/python/subunit/tests/test_subunit_filter.py
@@ -0,0 +1,136 @@
+#
+#  subunit: extensions to python unittest to get test results from subprocesses.
+#  Copyright (C) 2005  Robert Collins <robertc@robertcollins.net>
+#
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
+#
+
+"""Tests for subunit.TestResultFilter."""
+
+import unittest
+from StringIO import StringIO
+
+import subunit
+from subunit.test_results import TestResultFilter
+
+
+class TestTestResultFilter(unittest.TestCase):
+    """Test for TestResultFilter, a TestResult object which filters tests."""
+
+    def _setUp(self):
+        self.output = StringIO()
+
+    def test_default(self):
+        """The default is to exclude success and include everything else."""
+        self.filtered_result = unittest.TestResult()
+        self.filter = TestResultFilter(self.filtered_result)
+        self.run_tests()
+        # skips are seen as success by default python TestResult.
+        self.assertEqual(['error'],
+            [error[0].id() for error in self.filtered_result.errors])
+        self.assertEqual(['failed'],
+            [failure[0].id() for failure in
+            self.filtered_result.failures])
+        self.assertEqual(4, self.filtered_result.testsRun)
+
+    def test_exclude_errors(self):
+        self.filtered_result = unittest.TestResult()
+        self.filter = TestResultFilter(self.filtered_result,
+            filter_error=True)
+        self.run_tests()
+        # skips are seen as errors by default python TestResult.
+        self.assertEqual([], self.filtered_result.errors)
+        self.assertEqual(['failed'],
+            [failure[0].id() for failure in
+            self.filtered_result.failures])
+        self.assertEqual(3, self.filtered_result.testsRun)
+
+    def test_exclude_failure(self):
+        self.filtered_result = unittest.TestResult()
+        self.filter = TestResultFilter(self.filtered_result,
+            filter_failure=True)
+        self.run_tests()
+        self.assertEqual(['error'],
+            [error[0].id() for error in self.filtered_result.errors])
+        self.assertEqual([],
+            [failure[0].id() for failure in
+            self.filtered_result.failures])
+        self.assertEqual(3, self.filtered_result.testsRun)
+
+    def test_exclude_skips(self):
+        self.filtered_result = subunit.TestResultStats(None)
+        self.filter = TestResultFilter(self.filtered_result,
+            filter_skip=True)
+        self.run_tests()
+        self.assertEqual(0, self.filtered_result.skipped_tests)
+        self.assertEqual(2, self.filtered_result.failed_tests)
+        self.assertEqual(3, self.filtered_result.testsRun)
+
+    def test_include_success(self):
+        """Success's can be included if requested."""
+        self.filtered_result = unittest.TestResult()
+        self.filter = TestResultFilter(self.filtered_result,
+            filter_success=False)
+        self.run_tests()
+        self.assertEqual(['error'],
+            [error[0].id() for error in self.filtered_result.errors])
+        self.assertEqual(['failed'],
+            [failure[0].id() for failure in
+            self.filtered_result.failures])
+        self.assertEqual(5, self.filtered_result.testsRun)
+
+    def test_filter_predicate(self):
+        """You can filter by predicate callbacks"""
+        self.filtered_result = unittest.TestResult()
+        def filter_cb(test, outcome, err, details):
+            return outcome == 'success'
+        self.filter = TestResultFilter(self.filtered_result,
+            filter_predicate=filter_cb,
+            filter_success=False)
+        self.run_tests()
+        # Only success should pass
+        self.assertEqual(1, self.filtered_result.testsRun)
+
+    def run_tests(self):
+        self.setUpTestStream()
+        self.test = subunit.ProtocolTestCase(self.input_stream)
+        self.test.run(self.filter)
+
+    def setUpTestStream(self):
+        # While TestResultFilter works on python objects, using a subunit
+        # stream is an easy pithy way of getting a series of test objects to
+        # call into the TestResult, and as TestResultFilter is intended for
+        # use with subunit also has the benefit of detecting any interface
+        # skew issues.
+        self.input_stream = StringIO()
+        self.input_stream.write("""tags: global
+test passed
+success passed
+test failed
+tags: local
+failure failed
+test error
+error error [
+error details
+]
+test skipped
+skip skipped
+test todo
+xfail todo
+""")
+        self.input_stream.seek(0)
+    
+
+def test_suite():
+    loader = subunit.tests.TestUtil.TestLoader()
+    result = loader.loadTestsFromName(__name__)
+    return result
diff --git a/lib/subunit/python/subunit/tests/test_subunit_stats.py b/lib/subunit/python/subunit/tests/test_subunit_stats.py
new file mode 100644
index 0000000000..a7f8fca675
--- /dev/null
+++ b/lib/subunit/python/subunit/tests/test_subunit_stats.py
@@ -0,0 +1,83 @@
+#
+#  subunit: extensions to python unittest to get test results from subprocesses.
+#  Copyright (C) 2005  Robert Collins <robertc@robertcollins.net>
+#
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
+#
+
+"""Tests for subunit.TestResultStats."""
+
+import unittest
+from StringIO import StringIO
+
+import subunit
+
+
+class TestTestResultStats(unittest.TestCase):
+    """Test for TestResultStats, a TestResult object that generates stats."""
+
+    def setUp(self):
+        self.output = StringIO()
+        self.result = subunit.TestResultStats(self.output)
+        self.input_stream = StringIO()
+        self.test = subunit.ProtocolTestCase(self.input_stream)
+
+    def test_stats_empty(self):
+        self.test.run(self.result)
+        self.assertEqual(0, self.result.total_tests)
+        self.assertEqual(0, self.result.passed_tests)
+        self.assertEqual(0, self.result.failed_tests)
+        self.assertEqual(set(), self.result.seen_tags)
+
+    def setUpUsedStream(self):
+        self.input_stream.write("""tags: global
+test passed
+success passed
+test failed
+tags: local
+failure failed
+test error
+error error
+test skipped
+skip skipped
+test todo
+xfail todo
+""")
+        self.input_stream.seek(0)
+        self.test.run(self.result)
+    
+    def test_stats_smoke_everything(self):
+        # Statistics are calculated usefully.
+        self.setUpUsedStream()
+        self.assertEqual(5, self.result.total_tests)
+        self.assertEqual(2, self.result.passed_tests)
+        self.assertEqual(2, self.result.failed_tests)
+        self.assertEqual(1, self.result.skipped_tests)
+        self.assertEqual(set(["global", "local"]), self.result.seen_tags)
+
+    def test_stat_formatting(self):
+        expected = ("""
+Total tests:       5
+Passed tests:      2
+Failed tests:      2
+Skipped tests:     1
+Seen tags: global, local
+""")[1:]
+        self.setUpUsedStream()
+        self.result.formatStats()
+        self.assertEqual(expected, self.output.getvalue())
+
+
+def test_suite():
+    loader = subunit.tests.TestUtil.TestLoader()
+    result = loader.loadTestsFromName(__name__)
+    return result
diff --git a/lib/subunit/python/subunit/tests/test_subunit_tags.py b/lib/subunit/python/subunit/tests/test_subunit_tags.py
new file mode 100644
index 0000000000..227e2b7475
--- /dev/null
+++ b/lib/subunit/python/subunit/tests/test_subunit_tags.py
@@ -0,0 +1,68 @@
+#
+#  subunit: extensions to python unittest to get test results from subprocesses.
+#  Copyright (C) 2005  Robert Collins <robertc@robertcollins.net>
+#
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
+#
+
+"""Tests for subunit.tag_stream."""
+
+import unittest
+from StringIO import StringIO
+
+import subunit
+import subunit.test_results
+
+
+class TestSubUnitTags(unittest.TestCase):
+
+    def setUp(self):
+        self.original = StringIO()
+        self.filtered = StringIO()
+
+    def test_add_tag(self):
+        self.original.write("tags: foo\n")
+        self.original.write("test: test\n")
+        self.original.write("tags: bar -quux\n")
+        self.original.write("success: test\n")
+        self.original.seek(0)
+        result = subunit.tag_stream(self.original, self.filtered, ["quux"])
+        self.assertEqual([
+            "tags: quux",
+            "tags: foo",
+            "test: test",
+            "tags: bar",
+            "success: test",
+            ],
+            self.filtered.getvalue().splitlines())
+
+    def test_remove_tag(self):
+        self.original.write("tags: foo\n")
+        self.original.write("test: test\n")
+        self.original.write("tags: bar -quux\n")
+        self.original.write("success: test\n")
+        self.original.seek(0)
+        result = subunit.tag_stream(self.original, self.filtered, ["-bar"])
+        self.assertEqual([
+            "tags: -bar",
+            "tags: foo",
+            "test: test",
+            "tags: -quux",
+            "success: test",
+            ],
+            self.filtered.getvalue().splitlines())
+
+
+def test_suite():
+    loader = subunit.tests.TestUtil.TestLoader()
+    result = loader.loadTestsFromName(__name__)
+    return result
diff --git a/lib/subunit/python/subunit/tests/test_tap2subunit.py b/lib/subunit/python/subunit/tests/test_tap2subunit.py
new file mode 100644
index 0000000000..febfe9d441
--- /dev/null
+++ b/lib/subunit/python/subunit/tests/test_tap2subunit.py
@@ -0,0 +1,432 @@
+#
+#  subunit: extensions to python unittest to get test results from subprocesses.
+#  Copyright (C) 2005  Robert Collins <robertc@robertcollins.net>
+#
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
+#
+
+"""Tests for TAP2SubUnit."""
+
+import unittest
+from StringIO import StringIO
+import os
+import subunit
+import sys
+
+
+class TestTAP2SubUnit(unittest.TestCase):
+    """Tests for TAP2SubUnit.
+
+    These tests test TAP string data in, and subunit string data out.
+    This is ok because the subunit protocol is intended to be stable,
+    but it might be easier/pithier to write tests against TAP string in,
+    parsed subunit objects out (by hooking the subunit stream to a subunit
+    protocol server.
+    """
+
+    def setUp(self):
+        self.tap = StringIO()
+        self.subunit = StringIO()
+
+    def test_skip_entire_file(self):
+        # A file
+        # 1..- # Skipped: comment
+        # results in a single skipped test.
+        self.tap.write("1..0 # Skipped: entire file skipped\n")
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            "test file skip",
+            "skip file skip [",
+            "Skipped: entire file skipped",
+            "]",
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_ok_test_pass(self):
+        # A file
+        # ok
+        # results in a passed test with name 'test 1' (a synthetic name as tap
+        # does not require named fixtures - it is the first test in the tap
+        # stream).
+        self.tap.write("ok\n")
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            "test test 1",
+            "success test 1",
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_ok_test_number_pass(self):
+        # A file
+        # ok 1
+        # results in a passed test with name 'test 1'
+        self.tap.write("ok 1\n")
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            "test test 1",
+            "success test 1",
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_ok_test_number_description_pass(self):
+        # A file
+        # ok 1 - There is a description
+        # results in a passed test with name 'test 1 - There is a description'
+        self.tap.write("ok 1 - There is a description\n")
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            "test test 1 - There is a description",
+            "success test 1 - There is a description",
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_ok_test_description_pass(self):
+        # A file
+        # ok There is a description
+        # results in a passed test with name 'test 1 There is a description'
+        self.tap.write("ok There is a description\n")
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            "test test 1 There is a description",
+            "success test 1 There is a description",
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_ok_SKIP_skip(self):
+        # A file
+        # ok # SKIP
+        # results in a skkip test with name 'test 1'
+        self.tap.write("ok # SKIP\n")
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            "test test 1",
+            "skip test 1",
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_ok_number_description_SKIP_skip_comment(self):
+        # A file
+        # ok 1 foo  # SKIP Not done yet
+        # results in a skip test with name 'test 1 foo' and a log of
+        # Not done yet
+        self.tap.write("ok 1 foo  # SKIP Not done yet\n")
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            "test test 1 foo",
+            "skip test 1 foo [",
+            "Not done yet",
+            "]",
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_ok_SKIP_skip_comment(self):
+        # A file
+        # ok # SKIP Not done yet
+        # results in a skip test with name 'test 1' and a log of Not done yet
+        self.tap.write("ok # SKIP Not done yet\n")
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            "test test 1",
+            "skip test 1 [",
+            "Not done yet",
+            "]",
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_ok_TODO_xfail(self):
+        # A file
+        # ok # TODO
+        # results in a xfail test with name 'test 1'
+        self.tap.write("ok # TODO\n")
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            "test test 1",
+            "xfail test 1",
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_ok_TODO_xfail_comment(self):
+        # A file
+        # ok # TODO Not done yet
+        # results in a xfail test with name 'test 1' and a log of Not done yet
+        self.tap.write("ok # TODO Not done yet\n")
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            "test test 1",
+            "xfail test 1 [",
+            "Not done yet",
+            "]",
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_bail_out_errors(self):
+        # A file with line in it
+        # Bail out! COMMENT
+        # is treated as an error
+        self.tap.write("ok 1 foo\n")
+        self.tap.write("Bail out! Lifejacket engaged\n")
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            "test test 1 foo",
+            "success test 1 foo",
+            "test Bail out! Lifejacket engaged",
+            "error Bail out! Lifejacket engaged",
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_missing_test_at_end_with_plan_adds_error(self):
+        # A file
+        # 1..3
+        # ok first test
+        # not ok third test
+        # results in three tests, with the third being created
+        self.tap.write('1..3\n')
+        self.tap.write('ok first test\n')
+        self.tap.write('not ok second test\n')
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            'test test 1 first test',
+            'success test 1 first test',
+            'test test 2 second test',
+            'failure test 2 second test',
+            'test test 3',
+            'error test 3 [',
+            'test missing from TAP output',
+            ']',
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_missing_test_with_plan_adds_error(self):
+        # A file
+        # 1..3
+        # ok first test
+        # not ok 3 third test
+        # results in three tests, with the second being created
+        self.tap.write('1..3\n')
+        self.tap.write('ok first test\n')
+        self.tap.write('not ok 3 third test\n')
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            'test test 1 first test',
+            'success test 1 first test',
+            'test test 2',
+            'error test 2 [',
+            'test missing from TAP output',
+            ']',
+            'test test 3 third test',
+            'failure test 3 third test',
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_missing_test_no_plan_adds_error(self):
+        # A file
+        # ok first test
+        # not ok 3 third test
+        # results in three tests, with the second being created
+        self.tap.write('ok first test\n')
+        self.tap.write('not ok 3 third test\n')
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            'test test 1 first test',
+            'success test 1 first test',
+            'test test 2',
+            'error test 2 [',
+            'test missing from TAP output',
+            ']',
+            'test test 3 third test',
+            'failure test 3 third test',
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_four_tests_in_a_row_trailing_plan(self):
+        # A file
+        # ok 1 - first test in a script with no plan at all
+        # not ok 2 - second
+        # ok 3 - third
+        # not ok 4 - fourth
+        # 1..4
+        # results in four tests numbered and named
+        self.tap.write('ok 1 - first test in a script with trailing plan\n')
+        self.tap.write('not ok 2 - second\n')
+        self.tap.write('ok 3 - third\n')
+        self.tap.write('not ok 4 - fourth\n')
+        self.tap.write('1..4\n')
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            'test test 1 - first test in a script with trailing plan',
+            'success test 1 - first test in a script with trailing plan',
+            'test test 2 - second',
+            'failure test 2 - second',
+            'test test 3 - third',
+            'success test 3 - third',
+            'test test 4 - fourth',
+            'failure test 4 - fourth'
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_four_tests_in_a_row_with_plan(self):
+        # A file
+        # 1..4
+        # ok 1 - first test in a script with no plan at all
+        # not ok 2 - second
+        # ok 3 - third
+        # not ok 4 - fourth
+        # results in four tests numbered and named
+        self.tap.write('1..4\n')
+        self.tap.write('ok 1 - first test in a script with a plan\n')
+        self.tap.write('not ok 2 - second\n')
+        self.tap.write('ok 3 - third\n')
+        self.tap.write('not ok 4 - fourth\n')
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            'test test 1 - first test in a script with a plan',
+            'success test 1 - first test in a script with a plan',
+            'test test 2 - second',
+            'failure test 2 - second',
+            'test test 3 - third',
+            'success test 3 - third',
+            'test test 4 - fourth',
+            'failure test 4 - fourth'
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_four_tests_in_a_row_no_plan(self):
+        # A file
+        # ok 1 - first test in a script with no plan at all
+        # not ok 2 - second
+        # ok 3 - third
+        # not ok 4 - fourth
+        # results in four tests numbered and named
+        self.tap.write('ok 1 - first test in a script with no plan at all\n')
+        self.tap.write('not ok 2 - second\n')
+        self.tap.write('ok 3 - third\n')
+        self.tap.write('not ok 4 - fourth\n')
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            'test test 1 - first test in a script with no plan at all',
+            'success test 1 - first test in a script with no plan at all',
+            'test test 2 - second',
+            'failure test 2 - second',
+            'test test 3 - third',
+            'success test 3 - third',
+            'test test 4 - fourth',
+            'failure test 4 - fourth'
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_todo_and_skip(self):
+        # A file
+        # not ok 1 - a fail but # TODO but is TODO
+        # not ok 2 - another fail # SKIP instead
+        # results in two tests, numbered and commented.
+        self.tap.write("not ok 1 - a fail but # TODO but is TODO\n")
+        self.tap.write("not ok 2 - another fail # SKIP instead\n")
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            'test test 1 - a fail but',
+            'xfail test 1 - a fail but [',
+            'but is TODO',
+            ']',
+            'test test 2 - another fail',
+            'skip test 2 - another fail [',
+            'instead',
+            ']',
+            ],
+            self.subunit.getvalue().splitlines())
+
+    def test_leading_comments_add_to_next_test_log(self):
+        # A file
+        # # comment
+        # ok 
+        # ok
+        # results in a single test with the comment included
+        # in the first test and not the second.
+        self.tap.write("# comment\n")
+        self.tap.write("ok\n")
+        self.tap.write("ok\n")
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            'test test 1',
+            'success test 1 [',
+            '# comment',
+            ']',
+            'test test 2',
+            'success test 2',
+            ],
+            self.subunit.getvalue().splitlines())
+    
+    def test_trailing_comments_are_included_in_last_test_log(self):
+        # A file
+        # ok foo
+        # ok foo
+        # # comment
+        # results in a two tests, with the second having the comment
+        # attached to its log.
+        self.tap.write("ok\n")
+        self.tap.write("ok\n")
+        self.tap.write("# comment\n")
+        self.tap.seek(0)
+        result = subunit.TAP2SubUnit(self.tap, self.subunit)
+        self.assertEqual(0, result)
+        self.assertEqual([
+            'test test 1',
+            'success test 1',
+            'test test 2',
+            'success test 2 [',
+            '# comment',
+            ']',
+            ],
+            self.subunit.getvalue().splitlines())
+
+
+def test_suite():
+    loader = subunit.tests.TestUtil.TestLoader()
+    result = loader.loadTestsFromName(__name__)
+    return result
diff --git a/lib/subunit/python/subunit/tests/test_test_protocol.py b/lib/subunit/python/subunit/tests/test_test_protocol.py
index af31584a97..9e9db18163 100644
--- a/lib/subunit/python/subunit/tests/test_test_protocol.py
+++ b/lib/subunit/python/subunit/tests/test_test_protocol.py
@@ -1,126 +1,80 @@
 #
-#  subunit: extensions to python unittest to get test results from subprocesses.
+#  subunit: extensions to Python unittest to get test results from subprocesses.
 #  Copyright (C) 2005  Robert Collins <robertc@robertcollins.net>
 #
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
 #
 
+import datetime
 import unittest
 from StringIO import StringIO
 import os
-import subunit
 import sys
 
-try:
-    class MockTestProtocolServerClient(object):
-        """A mock protocol server client to test callbacks."""
-
-        def __init__(self):
-            self.end_calls = []
-            self.error_calls = []
-            self.failure_calls = []
-            self.start_calls = []
-            self.success_calls = []
-            super(MockTestProtocolServerClient, self).__init__()
-
-        def addError(self, test, error):
-            self.error_calls.append((test, error))
-
-        def addFailure(self, test, error):
-            self.failure_calls.append((test, error))
-
-        def addSuccess(self, test):
-            self.success_calls.append(test)
-
-        def stopTest(self, test):
-            self.end_calls.append(test)
-
-        def startTest(self, test):
-            self.start_calls.append(test)
-
-except AttributeError:
-    MockTestProtocolServer = None
-
-
-class TestMockTestProtocolServer(unittest.TestCase):
-
-    def test_start_test(self):
-        protocol = MockTestProtocolServerClient()
-        protocol.startTest(subunit.RemotedTestCase("test old mcdonald"))
-        self.assertEqual(protocol.start_calls,
-                         [subunit.RemotedTestCase("test old mcdonald")])
-        self.assertEqual(protocol.end_calls, [])
-        self.assertEqual(protocol.error_calls, [])
-        self.assertEqual(protocol.failure_calls, [])
-        self.assertEqual(protocol.success_calls, [])
-
-    def test_add_error(self):
-        protocol = MockTestProtocolServerClient()
-        protocol.addError(subunit.RemotedTestCase("old mcdonald"),
-                          subunit.RemoteError("omg it works"))
-        self.assertEqual(protocol.start_calls, [])
-        self.assertEqual(protocol.end_calls, [])
-        self.assertEqual(protocol.error_calls, [(
-                            subunit.RemotedTestCase("old mcdonald"),
-                            subunit.RemoteError("omg it works"))])
-        self.assertEqual(protocol.failure_calls, [])
-        self.assertEqual(protocol.success_calls, [])
-
-    def test_add_failure(self):
-        protocol = MockTestProtocolServerClient()
-        protocol.addFailure(subunit.RemotedTestCase("old mcdonald"),
-                            subunit.RemoteError("omg it works"))
-        self.assertEqual(protocol.start_calls, [])
-        self.assertEqual(protocol.end_calls, [])
-        self.assertEqual(protocol.error_calls, [])
-        self.assertEqual(protocol.failure_calls, [
-                            (subunit.RemotedTestCase("old mcdonald"),
-                             subunit.RemoteError("omg it works"))])
-        self.assertEqual(protocol.success_calls, [])
+from testtools.content import Content, TracebackContent
+from testtools.content_type import ContentType
+from testtools.tests.helpers import (
+    Python26TestResult,
+    Python27TestResult,
+    ExtendedTestResult,
+    )
 
-    def test_add_success(self):
-        protocol = MockTestProtocolServerClient()
-        protocol.addSuccess(subunit.RemotedTestCase("test old mcdonald"))
-        self.assertEqual(protocol.start_calls, [])
-        self.assertEqual(protocol.end_calls, [])
-        self.assertEqual(protocol.error_calls, [])
-        self.assertEqual(protocol.failure_calls, [])
-        self.assertEqual(protocol.success_calls,
-                         [subunit.RemotedTestCase("test old mcdonald")])
-
-    def test_end_test(self):
-        protocol = MockTestProtocolServerClient()
-        protocol.stopTest(subunit.RemotedTestCase("test old mcdonald"))
-        self.assertEqual(protocol.end_calls,
-                         [subunit.RemotedTestCase("test old mcdonald")])
-        self.assertEqual(protocol.error_calls, [])
-        self.assertEqual(protocol.failure_calls, [])
-        self.assertEqual(protocol.success_calls, [])
-        self.assertEqual(protocol.start_calls, [])
+import subunit
+from subunit import _remote_exception_str
+import subunit.iso8601 as iso8601
 
 
 class TestTestImports(unittest.TestCase):
 
     def test_imports(self):
+        from subunit import DiscardStream
         from subunit import TestProtocolServer
         from subunit import RemotedTestCase
         from subunit import RemoteError
         from subunit import ExecTestCase
         from subunit import IsolatedTestCase
         from subunit import TestProtocolClient
+        from subunit import ProtocolTestCase
+
+
+class TestDiscardStream(unittest.TestCase):
+
+    def test_write(self):
+        subunit.DiscardStream().write("content")
+
+
+class TestProtocolServerForward(unittest.TestCase):
+
+    def test_story(self):
+        client = unittest.TestResult()
+        out = StringIO()
+        protocol = subunit.TestProtocolServer(client, forward_stream=out)
+        pipe = StringIO("test old mcdonald\n"
+                        "success old mcdonald\n")
+        protocol.readFrom(pipe)
+        mcdonald = subunit.RemotedTestCase("old mcdonald")
+        self.assertEqual(client.testsRun, 1)
+        self.assertEqual(pipe.getvalue(), out.getvalue())
 
+    def test_not_command(self):
+        client = unittest.TestResult()
+        out = StringIO()
+        protocol = subunit.TestProtocolServer(client,
+            stream=subunit.DiscardStream(), forward_stream=out)
+        pipe = StringIO("success old mcdonald\n")
+        protocol.readFrom(pipe)
+        self.assertEqual(client.testsRun, 0)
+        self.assertEqual("", out.getvalue())
+        
 
 class TestTestProtocolServerPipe(unittest.TestCase):
 
@@ -140,47 +94,48 @@ class TestTestProtocolServerPipe(unittest.TestCase):
         bing = subunit.RemotedTestCase("bing crosby")
         an_error = subunit.RemotedTestCase("an error")
         self.assertEqual(client.errors,
-                         [(an_error, 'RemoteException: \n\n')])
+                         [(an_error, _remote_exception_str + '\n')])
         self.assertEqual(
             client.failures,
-            [(bing, "RemoteException: foo.c:53:ERROR invalid state\n\n")])
+            [(bing, _remote_exception_str + ": Text attachment: traceback\n"
+                "------------\nfoo.c:53:ERROR invalid state\n"
+                "------------\n\n")])
         self.assertEqual(client.testsRun, 3)
 
 
 class TestTestProtocolServerStartTest(unittest.TestCase):
 
     def setUp(self):
-        self.client = MockTestProtocolServerClient()
+        self.client = Python26TestResult()
         self.protocol = subunit.TestProtocolServer(self.client)
 
     def test_start_test(self):
         self.protocol.lineReceived("test old mcdonald\n")
-        self.assertEqual(self.client.start_calls,
-                         [subunit.RemotedTestCase("old mcdonald")])
+        self.assertEqual(self.client._events,
+            [('startTest', subunit.RemotedTestCase("old mcdonald"))])
 
     def test_start_testing(self):
         self.protocol.lineReceived("testing old mcdonald\n")
-        self.assertEqual(self.client.start_calls,
-                         [subunit.RemotedTestCase("old mcdonald")])
+        self.assertEqual(self.client._events,
+            [('startTest', subunit.RemotedTestCase("old mcdonald"))])
 
     def test_start_test_colon(self):
         self.protocol.lineReceived("test: old mcdonald\n")
-        self.assertEqual(self.client.start_calls,
-                         [subunit.RemotedTestCase("old mcdonald")])
+        self.assertEqual(self.client._events,
+            [('startTest', subunit.RemotedTestCase("old mcdonald"))])
 
     def test_start_testing_colon(self):
         self.protocol.lineReceived("testing: old mcdonald\n")
-        self.assertEqual(self.client.start_calls,
-                         [subunit.RemotedTestCase("old mcdonald")])
+        self.assertEqual(self.client._events,
+            [('startTest', subunit.RemotedTestCase("old mcdonald"))])
 
 
 class TestTestProtocolServerPassThrough(unittest.TestCase):
 
     def setUp(self):
-        from StringIO import StringIO
         self.stdout = StringIO()
         self.test = subunit.RemotedTestCase("old mcdonald")
-        self.client = MockTestProtocolServerClient()
+        self.client = ExtendedTestResult()
         self.protocol = subunit.TestProtocolServer(self.client, self.stdout)
 
     def keywords_before_test(self):
@@ -205,42 +160,37 @@ class TestTestProtocolServerPassThrough(unittest.TestCase):
 
     def test_keywords_before_test(self):
         self.keywords_before_test()
-        self.assertEqual(self.client.start_calls, [])
-        self.assertEqual(self.client.error_calls, [])
-        self.assertEqual(self.client.failure_calls, [])
-        self.assertEqual(self.client.success_calls, [])
+        self.assertEqual(self.client._events, [])
 
     def test_keywords_after_error(self):
         self.protocol.lineReceived("test old mcdonald\n")
         self.protocol.lineReceived("error old mcdonald\n")
         self.keywords_before_test()
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls,
-                         [(self.test, subunit.RemoteError(""))])
-        self.assertEqual(self.client.failure_calls, [])
-        self.assertEqual(self.client.success_calls, [])
+        self.assertEqual([
+            ('startTest', self.test),
+            ('addError', self.test, {}),
+            ('stopTest', self.test),
+            ], self.client._events)
 
     def test_keywords_after_failure(self):
         self.protocol.lineReceived("test old mcdonald\n")
         self.protocol.lineReceived("failure old mcdonald\n")
         self.keywords_before_test()
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls, [])
-        self.assertEqual(self.client.failure_calls,
-                         [(self.test, subunit.RemoteError())])
-        self.assertEqual(self.client.success_calls, [])
+        self.assertEqual(self.client._events, [
+            ('startTest', self.test),
+            ('addFailure', self.test, {}),
+            ('stopTest', self.test),
+            ])
 
     def test_keywords_after_success(self):
         self.protocol.lineReceived("test old mcdonald\n")
         self.protocol.lineReceived("success old mcdonald\n")
         self.keywords_before_test()
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls, [])
-        self.assertEqual(self.client.failure_calls, [])
-        self.assertEqual(self.client.success_calls, [self.test])
+        self.assertEqual([
+            ('startTest', self.test),
+            ('addSuccess', self.test),
+            ('stopTest', self.test),
+            ], self.client._events)
 
     def test_keywords_after_test(self):
         self.protocol.lineReceived("test old mcdonald\n")
@@ -265,14 +215,15 @@ class TestTestProtocolServerPassThrough(unittest.TestCase):
                                                  "successful a\n"
                                                  "successful: a\n"
                                                  "]\n")
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.failure_calls,
-                         [(self.test, subunit.RemoteError())])
-        self.assertEqual(self.client.error_calls, [])
-        self.assertEqual(self.client.success_calls, [])
+        self.assertEqual(self.client._events, [
+            ('startTest', self.test),
+            ('addFailure', self.test, {}),
+            ('stopTest', self.test),
+            ])
 
     def test_keywords_during_failure(self):
+        # A smoke test to make sure that the details parsers have control
+        # appropriately.
         self.protocol.lineReceived("test old mcdonald\n")
         self.protocol.lineReceived("failure: old mcdonald [\n")
         self.protocol.lineReceived("test old mcdonald\n")
@@ -287,21 +238,24 @@ class TestTestProtocolServerPassThrough(unittest.TestCase):
         self.protocol.lineReceived(" ]\n")
         self.protocol.lineReceived("]\n")
         self.assertEqual(self.stdout.getvalue(), "")
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.failure_calls,
-                         [(self.test, subunit.RemoteError("test old mcdonald\n"
-                                                  "failure a\n"
-                                                  "failure: a\n"
-                                                  "error a\n"
-                                                  "error: a\n"
-                                                  "success a\n"
-                                                  "success: a\n"
-                                                  "successful a\n"
-                                                  "successful: a\n"
-                                                  "]\n"))])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls, [])
-        self.assertEqual(self.client.success_calls, [])
+        details = {}
+        details['traceback'] = Content(ContentType("text", "x-traceback"),
+            lambda:[
+            "test old mcdonald\n"
+            "failure a\n"
+            "failure: a\n"
+            "error a\n"
+            "error: a\n"
+            "success a\n"
+            "success: a\n"
+            "successful a\n"
+            "successful: a\n"
+            "]\n"])
+        self.assertEqual(self.client._events, [
+            ('startTest', self.test),
+            ('addFailure', self.test, details),
+            ('stopTest', self.test),
+            ])
 
     def test_stdout_passthrough(self):
         """Lines received which cannot be interpreted as any protocol action
@@ -315,103 +269,133 @@ class TestTestProtocolServerPassThrough(unittest.TestCase):
 class TestTestProtocolServerLostConnection(unittest.TestCase):
 
     def setUp(self):
-        self.client = MockTestProtocolServerClient()
+        self.client = Python26TestResult()
         self.protocol = subunit.TestProtocolServer(self.client)
         self.test = subunit.RemotedTestCase("old mcdonald")
 
     def test_lost_connection_no_input(self):
         self.protocol.lostConnection()
-        self.assertEqual(self.client.start_calls, [])
-        self.assertEqual(self.client.error_calls, [])
-        self.assertEqual(self.client.failure_calls, [])
-        self.assertEqual(self.client.success_calls, [])
+        self.assertEqual([], self.client._events)
 
     def test_lost_connection_after_start(self):
         self.protocol.lineReceived("test old mcdonald\n")
         self.protocol.lostConnection()
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls, [
-            (self.test, subunit.RemoteError("lost connection during "
-                                            "test 'old mcdonald'"))])
-        self.assertEqual(self.client.failure_calls, [])
-        self.assertEqual(self.client.success_calls, [])
+        failure = subunit.RemoteError(
+            "lost connection during test 'old mcdonald'")
+        self.assertEqual([
+            ('startTest', self.test),
+            ('addError', self.test, failure),
+            ('stopTest', self.test),
+            ], self.client._events)
 
     def test_lost_connected_after_error(self):
         self.protocol.lineReceived("test old mcdonald\n")
         self.protocol.lineReceived("error old mcdonald\n")
         self.protocol.lostConnection()
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.failure_calls, [])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls, [
-            (self.test, subunit.RemoteError(""))])
-        self.assertEqual(self.client.success_calls, [])
+        self.assertEqual([
+            ('startTest', self.test),
+            ('addError', self.test, subunit.RemoteError("")),
+            ('stopTest', self.test),
+            ], self.client._events)
 
-    def test_lost_connection_during_error(self):
+    def do_connection_lost(self, outcome, opening):
         self.protocol.lineReceived("test old mcdonald\n")
-        self.protocol.lineReceived("error old mcdonald [\n")
+        self.protocol.lineReceived("%s old mcdonald %s" % (outcome, opening))
         self.protocol.lostConnection()
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls, [
-            (self.test, subunit.RemoteError("lost connection during error "
-                                            "report of test 'old mcdonald'"))])
-        self.assertEqual(self.client.failure_calls, [])
-        self.assertEqual(self.client.success_calls, [])
+        failure = subunit.RemoteError(
+            "lost connection during %s report of test 'old mcdonald'" % 
+            outcome)
+        self.assertEqual([
+            ('startTest', self.test),
+            ('addError', self.test, failure),
+            ('stopTest', self.test),
+            ], self.client._events)
+
+    def test_lost_connection_during_error(self):
+        self.do_connection_lost("error", "[\n")
+
+    def test_lost_connection_during_error_details(self):
+        self.do_connection_lost("error", "[ multipart\n")
 
     def test_lost_connected_after_failure(self):
         self.protocol.lineReceived("test old mcdonald\n")
         self.protocol.lineReceived("failure old mcdonald\n")
         self.protocol.lostConnection()
-        test = subunit.RemotedTestCase("old mcdonald")
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls, [])
-        self.assertEqual(self.client.failure_calls,
-                         [(self.test, subunit.RemoteError())])
-        self.assertEqual(self.client.success_calls, [])
+        self.assertEqual([
+            ('startTest', self.test),
+            ('addFailure', self.test, subunit.RemoteError("")),
+            ('stopTest', self.test),
+            ], self.client._events)
 
     def test_lost_connection_during_failure(self):
-        self.protocol.lineReceived("test old mcdonald\n")
-        self.protocol.lineReceived("failure old mcdonald [\n")
-        self.protocol.lostConnection()
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls,
-                         [(self.test,
-                           subunit.RemoteError("lost connection during "
-                                               "failure report"
-                                               " of test 'old mcdonald'"))])
-        self.assertEqual(self.client.failure_calls, [])
-        self.assertEqual(self.client.success_calls, [])
+        self.do_connection_lost("failure", "[\n")
+
+    def test_lost_connection_during_failure_details(self):
+        self.do_connection_lost("failure", "[ multipart\n")
 
     def test_lost_connection_after_success(self):
         self.protocol.lineReceived("test old mcdonald\n")
         self.protocol.lineReceived("success old mcdonald\n")
         self.protocol.lostConnection()
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls, [])
-        self.assertEqual(self.client.failure_calls, [])
-        self.assertEqual(self.client.success_calls, [self.test])
+        self.assertEqual([
+            ('startTest', self.test),
+            ('addSuccess', self.test),
+            ('stopTest', self.test),
+            ], self.client._events)
+
+    def test_lost_connection_during_success(self):
+        self.do_connection_lost("success", "[\n")
+
+    def test_lost_connection_during_success_details(self):
+        self.do_connection_lost("success", "[ multipart\n")
+
+    def test_lost_connection_during_skip(self):
+        self.do_connection_lost("skip", "[\n")
+
+    def test_lost_connection_during_skip_details(self):
+        self.do_connection_lost("skip", "[ multipart\n")
+
+    def test_lost_connection_during_xfail(self):
+        self.do_connection_lost("xfail", "[\n")
+
+    def test_lost_connection_during_xfail_details(self):
+        self.do_connection_lost("xfail", "[ multipart\n")
+
+
+class TestInTestMultipart(unittest.TestCase):
+
+    def setUp(self):
+        self.client = ExtendedTestResult()
+        self.protocol = subunit.TestProtocolServer(self.client)
+        self.protocol.lineReceived("test mcdonalds farm\n")
+        self.test = subunit.RemotedTestCase("mcdonalds farm")
+
+    def test__outcome_sets_details_parser(self):
+        self.protocol._reading_success_details.details_parser = None
+        self.protocol._state._outcome(0, "mcdonalds farm [ multipart\n",
+            None, self.protocol._reading_success_details)
+        parser = self.protocol._reading_success_details.details_parser
+        self.assertNotEqual(None, parser)
+        self.assertTrue(isinstance(parser,
+            subunit.details.MultipartDetailsParser))
 
 
 class TestTestProtocolServerAddError(unittest.TestCase):
 
     def setUp(self):
-        self.client = MockTestProtocolServerClient()
+        self.client = ExtendedTestResult()
         self.protocol = subunit.TestProtocolServer(self.client)
         self.protocol.lineReceived("test mcdonalds farm\n")
         self.test = subunit.RemotedTestCase("mcdonalds farm")
 
     def simple_error_keyword(self, keyword):
         self.protocol.lineReceived("%s mcdonalds farm\n" % keyword)
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls, [
-            (self.test, subunit.RemoteError(""))])
-        self.assertEqual(self.client.failure_calls, [])
+        details = {}
+        self.assertEqual([
+            ('startTest', self.test),
+            ('addError', self.test, details),
+            ('stopTest', self.test),
+            ], self.client._events)
 
     def test_simple_error(self):
         self.simple_error_keyword("error")
@@ -422,21 +406,27 @@ class TestTestProtocolServerAddError(unittest.TestCase):
     def test_error_empty_message(self):
         self.protocol.lineReceived("error mcdonalds farm [\n")
         self.protocol.lineReceived("]\n")
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls, [
-            (self.test, subunit.RemoteError(""))])
-        self.assertEqual(self.client.failure_calls, [])
+        details = {}
+        details['traceback'] = Content(ContentType("text", "x-traceback"),
+            lambda:[""])
+        self.assertEqual([
+            ('startTest', self.test),
+            ('addError', self.test, details),
+            ('stopTest', self.test),
+            ], self.client._events)
 
     def error_quoted_bracket(self, keyword):
         self.protocol.lineReceived("%s mcdonalds farm [\n" % keyword)
         self.protocol.lineReceived(" ]\n")
         self.protocol.lineReceived("]\n")
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls, [
-            (self.test, subunit.RemoteError("]\n"))])
-        self.assertEqual(self.client.failure_calls, [])
+        details = {}
+        details['traceback'] = Content(ContentType("text", "x-traceback"),
+            lambda:["]\n"])
+        self.assertEqual([
+            ('startTest', self.test),
+            ('addError', self.test, details),
+            ('stopTest', self.test),
+            ], self.client._events)
 
     def test_error_quoted_bracket(self):
         self.error_quoted_bracket("error")
@@ -448,18 +438,22 @@ class TestTestProtocolServerAddError(unittest.TestCase):
 class TestTestProtocolServerAddFailure(unittest.TestCase):
 
     def setUp(self):
-        self.client = MockTestProtocolServerClient()
+        self.client = ExtendedTestResult()
         self.protocol = subunit.TestProtocolServer(self.client)
         self.protocol.lineReceived("test mcdonalds farm\n")
         self.test = subunit.RemotedTestCase("mcdonalds farm")
 
+    def assertFailure(self, details):
+        self.assertEqual([
+            ('startTest', self.test),
+            ('addFailure', self.test, details),
+            ('stopTest', self.test),
+            ], self.client._events)
+
     def simple_failure_keyword(self, keyword):
         self.protocol.lineReceived("%s mcdonalds farm\n" % keyword)
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls, [])
-        self.assertEqual(self.client.failure_calls,
-                         [(self.test, subunit.RemoteError())])
+        details = {}
+        self.assertFailure(details)
 
     def test_simple_failure(self):
         self.simple_failure_keyword("failure")
@@ -470,21 +464,19 @@ class TestTestProtocolServerAddFailure(unittest.TestCase):
     def test_failure_empty_message(self):
         self.protocol.lineReceived("failure mcdonalds farm [\n")
         self.protocol.lineReceived("]\n")
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls, [])
-        self.assertEqual(self.client.failure_calls,
-                         [(self.test, subunit.RemoteError())])
+        details = {}
+        details['traceback'] = Content(ContentType("text", "x-traceback"),
+            lambda:[""])
+        self.assertFailure(details)
 
     def failure_quoted_bracket(self, keyword):
         self.protocol.lineReceived("%s mcdonalds farm [\n" % keyword)
         self.protocol.lineReceived(" ]\n")
         self.protocol.lineReceived("]\n")
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls, [])
-        self.assertEqual(self.client.failure_calls,
-                         [(self.test, subunit.RemoteError("]\n"))])
+        details = {}
+        details['traceback'] = Content(ContentType("text", "x-traceback"),
+            lambda:["]\n"])
+        self.assertFailure(details)
 
     def test_failure_quoted_bracket(self):
         self.failure_quoted_bracket("failure")
@@ -493,20 +485,191 @@ class TestTestProtocolServerAddFailure(unittest.TestCase):
         self.failure_quoted_bracket("failure:")
 
 
+class TestTestProtocolServerAddxFail(unittest.TestCase):
+    """Tests for the xfail keyword.
+
+    In Python this can thunk through to Success due to stdlib limitations (see
+    README).
+    """
+
+    def capture_expected_failure(self, test, err):
+        self._events.append((test, err))
+
+    def setup_python26(self):
+        """Setup a test object ready to be xfailed and thunk to success."""
+        self.client = Python26TestResult()
+        self.setup_protocol()
+
+    def setup_python27(self):
+        """Setup a test object ready to be xfailed."""
+        self.client = Python27TestResult()
+        self.setup_protocol()
+
+    def setup_python_ex(self):
+        """Setup a test object ready to be xfailed with details."""
+        self.client = ExtendedTestResult()
+        self.setup_protocol()
+
+    def setup_protocol(self):
+        """Setup the protocol based on self.client."""
+        self.protocol = subunit.TestProtocolServer(self.client)
+        self.protocol.lineReceived("test mcdonalds farm\n")
+        self.test = self.client._events[-1][-1]
+
+    def simple_xfail_keyword(self, keyword, as_success):
+        self.protocol.lineReceived("%s mcdonalds farm\n" % keyword)
+        self.check_success_or_xfail(as_success)
+
+    def check_success_or_xfail(self, as_success, error_message=None):
+        if as_success:
+            self.assertEqual([
+                ('startTest', self.test),
+                ('addSuccess', self.test),
+                ('stopTest', self.test),
+                ], self.client._events)
+        else:
+            details = {}
+            if error_message is not None:
+                details['traceback'] = Content(
+                    ContentType("text", "x-traceback"), lambda:[error_message])
+            if isinstance(self.client, ExtendedTestResult):
+                value = details
+            else:
+                if error_message is not None:
+                    value = subunit.RemoteError('Text attachment: traceback\n'
+                        '------------\n' + error_message + '------------\n')
+                else:
+                    value = subunit.RemoteError()
+            self.assertEqual([
+                ('startTest', self.test),
+                ('addExpectedFailure', self.test, value),
+                ('stopTest', self.test),
+                ], self.client._events)
+
+    def test_simple_xfail(self):
+        self.setup_python26()
+        self.simple_xfail_keyword("xfail", True)
+        self.setup_python27()
+        self.simple_xfail_keyword("xfail",  False)
+        self.setup_python_ex()
+        self.simple_xfail_keyword("xfail",  False)
+
+    def test_simple_xfail_colon(self):
+        self.setup_python26()
+        self.simple_xfail_keyword("xfail:", True)
+        self.setup_python27()
+        self.simple_xfail_keyword("xfail:", False)
+        self.setup_python_ex()
+        self.simple_xfail_keyword("xfail:", False)
+
+    def test_xfail_empty_message(self):
+        self.setup_python26()
+        self.empty_message(True)
+        self.setup_python27()
+        self.empty_message(False)
+        self.setup_python_ex()
+        self.empty_message(False, error_message="")
+
+    def empty_message(self, as_success, error_message="\n"):
+        self.protocol.lineReceived("xfail mcdonalds farm [\n")
+        self.protocol.lineReceived("]\n")
+        self.check_success_or_xfail(as_success, error_message)
+
+    def xfail_quoted_bracket(self, keyword, as_success):
+        # This tests it is accepted, but cannot test it is used today, because
+        # of not having a way to expose it in Python so far.
+        self.protocol.lineReceived("%s mcdonalds farm [\n" % keyword)
+        self.protocol.lineReceived(" ]\n")
+        self.protocol.lineReceived("]\n")
+        self.check_success_or_xfail(as_success, "]\n")
+
+    def test_xfail_quoted_bracket(self):
+        self.setup_python26()
+        self.xfail_quoted_bracket("xfail", True)
+        self.setup_python27()
+        self.xfail_quoted_bracket("xfail", False)
+        self.setup_python_ex()
+        self.xfail_quoted_bracket("xfail", False)
+
+    def test_xfail_colon_quoted_bracket(self):
+        self.setup_python26()
+        self.xfail_quoted_bracket("xfail:", True)
+        self.setup_python27()
+        self.xfail_quoted_bracket("xfail:", False)
+        self.setup_python_ex()
+        self.xfail_quoted_bracket("xfail:", False)
+
+
+class TestTestProtocolServerAddSkip(unittest.TestCase):
+    """Tests for the skip keyword.
+
+    In Python this meets the testtools extended TestResult contract.
+    (See https://launchpad.net/testtools).
+    """
+
+    def setUp(self):
+        """Setup a test object ready to be skipped."""
+        self.client = ExtendedTestResult()
+        self.protocol = subunit.TestProtocolServer(self.client)
+        self.protocol.lineReceived("test mcdonalds farm\n")
+        self.test = self.client._events[-1][-1]
+
+    def assertSkip(self, reason):
+        details = {}
+        if reason is not None:
+            details['reason'] = Content(
+                ContentType("text", "plain"), lambda:[reason])
+        self.assertEqual([
+            ('startTest', self.test),
+            ('addSkip', self.test, details),
+            ('stopTest', self.test),
+            ], self.client._events)
+
+    def simple_skip_keyword(self, keyword):
+        self.protocol.lineReceived("%s mcdonalds farm\n" % keyword)
+        self.assertSkip(None)
+
+    def test_simple_skip(self):
+        self.simple_skip_keyword("skip")
+
+    def test_simple_skip_colon(self):
+        self.simple_skip_keyword("skip:")
+
+    def test_skip_empty_message(self):
+        self.protocol.lineReceived("skip mcdonalds farm [\n")
+        self.protocol.lineReceived("]\n")
+        self.assertSkip("")
+
+    def skip_quoted_bracket(self, keyword):
+        # This tests it is accepted, but cannot test it is used today, because
+        # of not having a way to expose it in Python so far.
+        self.protocol.lineReceived("%s mcdonalds farm [\n" % keyword)
+        self.protocol.lineReceived(" ]\n")
+        self.protocol.lineReceived("]\n")
+        self.assertSkip("]\n")
+
+    def test_skip_quoted_bracket(self):
+        self.skip_quoted_bracket("skip")
+
+    def test_skip_colon_quoted_bracket(self):
+        self.skip_quoted_bracket("skip:")
+
+
 class TestTestProtocolServerAddSuccess(unittest.TestCase):
 
     def setUp(self):
-        self.client = MockTestProtocolServerClient()
+        self.client = ExtendedTestResult()
         self.protocol = subunit.TestProtocolServer(self.client)
         self.protocol.lineReceived("test mcdonalds farm\n")
         self.test = subunit.RemotedTestCase("mcdonalds farm")
 
     def simple_success_keyword(self, keyword):
         self.protocol.lineReceived("%s mcdonalds farm\n" % keyword)
-        self.assertEqual(self.client.start_calls, [self.test])
-        self.assertEqual(self.client.end_calls, [self.test])
-        self.assertEqual(self.client.error_calls, [])
-        self.assertEqual(self.client.success_calls, [self.test])
+        self.assertEqual([
+            ('startTest', self.test),
+            ('addSuccess', self.test),
+            ('stopTest', self.test),
+            ], self.client._events)
 
     def test_simple_success(self):
         self.simple_success_keyword("failure")
@@ -520,6 +683,134 @@ class TestTestProtocolServerAddSuccess(unittest.TestCase):
     def test_simple_success_colon(self):
         self.simple_success_keyword("successful:")
 
+    def assertSuccess(self, details):
+        self.assertEqual([
+            ('startTest', self.test),
+            ('addSuccess', self.test, details),
+            ('stopTest', self.test),
+            ], self.client._events)
+
+    def test_success_empty_message(self):
+        self.protocol.lineReceived("success mcdonalds farm [\n")
+        self.protocol.lineReceived("]\n")
+        details = {}
+        details['message'] = Content(ContentType("text", "plain"),
+            lambda:[""])
+        self.assertSuccess(details)
+
+    def success_quoted_bracket(self, keyword):
+        # This tests it is accepted, but cannot test it is used today, because
+        # of not having a way to expose it in Python so far.
+        self.protocol.lineReceived("%s mcdonalds farm [\n" % keyword)
+        self.protocol.lineReceived(" ]\n")
+        self.protocol.lineReceived("]\n")
+        details = {}
+        details['message'] = Content(ContentType("text", "plain"),
+            lambda:["]\n"])
+        self.assertSuccess(details)
+
+    def test_success_quoted_bracket(self):
+        self.success_quoted_bracket("success")
+
+    def test_success_colon_quoted_bracket(self):
+        self.success_quoted_bracket("success:")
+
+
+class TestTestProtocolServerProgress(unittest.TestCase):
+    """Test receipt of progress: directives."""
+
+    def test_progress_accepted_stdlib(self):
+        self.result = Python26TestResult()
+        self.stream = StringIO()
+        self.protocol = subunit.TestProtocolServer(self.result,
+            stream=self.stream)
+        self.protocol.lineReceived("progress: 23")
+        self.protocol.lineReceived("progress: -2")
+        self.protocol.lineReceived("progress: +4")
+        self.assertEqual("", self.stream.getvalue())
+
+    def test_progress_accepted_extended(self):
+        # With a progress capable TestResult, progress events are emitted.
+        self.result = ExtendedTestResult()
+        self.stream = StringIO()
+        self.protocol = subunit.TestProtocolServer(self.result,
+            stream=self.stream)
+        self.protocol.lineReceived("progress: 23")
+        self.protocol.lineReceived("progress: push")
+        self.protocol.lineReceived("progress: -2")
+        self.protocol.lineReceived("progress: pop")
+        self.protocol.lineReceived("progress: +4")
+        self.assertEqual("", self.stream.getvalue())
+        self.assertEqual([
+            ('progress', 23, subunit.PROGRESS_SET),
+            ('progress', None, subunit.PROGRESS_PUSH),
+            ('progress', -2, subunit.PROGRESS_CUR),
+            ('progress', None, subunit.PROGRESS_POP),
+            ('progress', 4, subunit.PROGRESS_CUR),
+            ], self.result._events)
+
+
+class TestTestProtocolServerStreamTags(unittest.TestCase):
+    """Test managing tags on the protocol level."""
+
+    def setUp(self):
+        self.client = ExtendedTestResult()
+        self.protocol = subunit.TestProtocolServer(self.client)
+
+    def test_initial_tags(self):
+        self.protocol.lineReceived("tags: foo bar:baz  quux\n")
+        self.assertEqual([
+            ('tags', set(["foo", "bar:baz", "quux"]), set()),
+            ], self.client._events)
+
+    def test_minus_removes_tags(self):
+        self.protocol.lineReceived("tags: -bar quux\n")
+        self.assertEqual([
+            ('tags', set(["quux"]), set(["bar"])),
+            ], self.client._events)
+
+    def test_tags_do_not_get_set_on_test(self):
+        self.protocol.lineReceived("test mcdonalds farm\n")
+        test = self.client._events[0][-1]
+        self.assertEqual(None, getattr(test, 'tags', None))
+
+    def test_tags_do_not_get_set_on_global_tags(self):
+        self.protocol.lineReceived("tags: foo bar\n")
+        self.protocol.lineReceived("test mcdonalds farm\n")
+        test = self.client._events[-1][-1]
+        self.assertEqual(None, getattr(test, 'tags', None))
+
+    def test_tags_get_set_on_test_tags(self):
+        self.protocol.lineReceived("test mcdonalds farm\n")
+        test = self.client._events[-1][-1]
+        self.protocol.lineReceived("tags: foo bar\n")
+        self.protocol.lineReceived("success mcdonalds farm\n")
+        self.assertEqual(None, getattr(test, 'tags', None))
+
+
+class TestTestProtocolServerStreamTime(unittest.TestCase):
+    """Test managing time information at the protocol level."""
+
+    def test_time_accepted_stdlib(self):
+        self.result = Python26TestResult()
+        self.stream = StringIO()
+        self.protocol = subunit.TestProtocolServer(self.result,
+            stream=self.stream)
+        self.protocol.lineReceived("time: 2001-12-12 12:59:59Z\n")
+        self.assertEqual("", self.stream.getvalue())
+
+    def test_time_accepted_extended(self):
+        self.result = ExtendedTestResult()
+        self.stream = StringIO()
+        self.protocol = subunit.TestProtocolServer(self.result,
+            stream=self.stream)
+        self.protocol.lineReceived("time: 2001-12-12 12:59:59Z\n")
+        self.assertEqual("", self.stream.getvalue())
+        self.assertEqual([
+            ('time', datetime.datetime(2001, 12, 12, 12, 59, 59, 0,
+            iso8601.Utc()))
+            ], self.result._events)
+
 
 class TestRemotedTestCase(unittest.TestCase):
 
@@ -529,14 +820,14 @@ class TestRemotedTestCase(unittest.TestCase):
         self.assertRaises(NotImplementedError, test.tearDown)
         self.assertEqual("A test description",
                          test.shortDescription())
-        self.assertEqual("subunit.RemotedTestCase.A test description",
+        self.assertEqual("A test description",
                          test.id())
         self.assertEqual("A test description (subunit.RemotedTestCase)", "%s" % test)
         self.assertEqual("<subunit.RemotedTestCase description="
                          "'A test description'>", "%r" % test)
         result = unittest.TestResult()
         test.run(result)
-        self.assertEqual([(test, "RemoteException: "
+        self.assertEqual([(test, _remote_exception_str + ": "
                                  "Cannot run RemotedTestCases.\n\n")],
                          result.errors)
         self.assertEqual(1, result.testsRun)
@@ -570,27 +861,43 @@ class TestExecTestCase(unittest.TestCase):
             # the sample script runs three tests, one each
             # that fails, errors and succeeds
 
+        def test_sample_method_args(self):
+            """sample-script.py foo"""
+            # sample that will run just one test.
 
     def test_construct(self):
         test = self.SampleExecTestCase("test_sample_method")
         self.assertEqual(test.script,
                          subunit.join_dir(__file__, 'sample-script.py'))
 
+    def test_args(self):
+        result = unittest.TestResult()
+        test = self.SampleExecTestCase("test_sample_method_args")
+        test.run(result)
+        self.assertEqual(1, result.testsRun)
+
     def test_run(self):
-        runner = MockTestProtocolServerClient()
+        result = ExtendedTestResult()
         test = self.SampleExecTestCase("test_sample_method")
-        test.run(runner)
+        test.run(result)
         mcdonald = subunit.RemotedTestCase("old mcdonald")
         bing = subunit.RemotedTestCase("bing crosby")
+        bing_details = {}
+        bing_details['traceback'] = Content(ContentType("text", "x-traceback"),
+            lambda:["foo.c:53:ERROR invalid state\n"])
         an_error = subunit.RemotedTestCase("an error")
-        self.assertEqual(runner.error_calls,
-                         [(an_error, subunit.RemoteError())])
-        self.assertEqual(runner.failure_calls,
-                         [(bing,
-                           subunit.RemoteError(
-                            "foo.c:53:ERROR invalid state\n"))])
-        self.assertEqual(runner.start_calls, [mcdonald, bing, an_error])
-        self.assertEqual(runner.end_calls, [mcdonald, bing, an_error])
+        error_details = {}
+        self.assertEqual([
+            ('startTest', mcdonald),
+            ('addSuccess', mcdonald),
+            ('stopTest', mcdonald),
+            ('startTest', bing),
+            ('addFailure', bing, bing_details),
+            ('stopTest', bing),
+            ('startTest', an_error),
+            ('addError', an_error, error_details),
+            ('stopTest', an_error),
+            ], result._events)
 
     def test_debug(self):
         test = self.SampleExecTestCase("test_sample_method")
@@ -689,7 +996,11 @@ class TestTestProtocolClient(unittest.TestCase):
         self.io = StringIO()
         self.protocol = subunit.TestProtocolClient(self.io)
         self.test = TestTestProtocolClient("test_start_test")
-
+        self.sample_details = {'something':Content(
+            ContentType('text', 'plain'), lambda:['serialised\nform'])}
+        self.sample_tb_details = dict(self.sample_details)
+        self.sample_tb_details['traceback'] = TracebackContent(
+            subunit.RemoteError("boo qux"), self.test)
 
     def test_start_test(self):
         """Test startTest on a TestProtocolClient."""
@@ -697,7 +1008,7 @@ class TestTestProtocolClient(unittest.TestCase):
         self.assertEqual(self.io.getvalue(), "test: %s\n" % self.test.id())
 
     def test_stop_test(self):
-        """Test stopTest on a TestProtocolClient."""
+        # stopTest doesn't output anything.
         self.protocol.stopTest(self.test)
         self.assertEqual(self.io.getvalue(), "")
 
@@ -707,22 +1018,154 @@ class TestTestProtocolClient(unittest.TestCase):
         self.assertEqual(
             self.io.getvalue(), "successful: %s\n" % self.test.id())
 
+    def test_add_success_details(self):
+        """Test addSuccess on a TestProtocolClient with details."""
+        self.protocol.addSuccess(self.test, details=self.sample_details)
+        self.assertEqual(
+            self.io.getvalue(), "successful: %s [ multipart\n"
+                "Content-Type: text/plain\n"
+                "something\n"
+                "F\r\nserialised\nform0\r\n]\n" % self.test.id())
+
     def test_add_failure(self):
         """Test addFailure on a TestProtocolClient."""
-        self.protocol.addFailure(self.test, subunit.RemoteError("boo"))
+        self.protocol.addFailure(
+            self.test, subunit.RemoteError("boo qux"))
+        self.assertEqual(
+            self.io.getvalue(),
+            ('failure: %s [\n' + _remote_exception_str + ': boo qux\n]\n')
+            % self.test.id())
+
+    def test_add_failure_details(self):
+        """Test addFailure on a TestProtocolClient with details."""
+        self.protocol.addFailure(
+            self.test, details=self.sample_tb_details)
         self.assertEqual(
             self.io.getvalue(),
-            'failure: %s [\nRemoteException: boo\n]\n' % self.test.id())
+            ("failure: %s [ multipart\n"
+            "Content-Type: text/plain\n"
+            "something\n"
+            "F\r\nserialised\nform0\r\n"
+            "Content-Type: text/x-traceback;charset=utf8,language=python\n"
+            "traceback\n"
+            "1A\r\n" + _remote_exception_str + ": boo qux\n0\r\n"
+            "]\n") % self.test.id())
 
     def test_add_error(self):
         """Test stopTest on a TestProtocolClient."""
-        self.protocol.addError(self.test, subunit.RemoteError("phwoar"))
+        self.protocol.addError(
+            self.test, subunit.RemoteError("phwoar crikey"))
+        self.assertEqual(
+            self.io.getvalue(),
+            ('error: %s [\n' +
+            _remote_exception_str + ": phwoar crikey\n"
+            "]\n") % self.test.id())
+
+    def test_add_error_details(self):
+        """Test stopTest on a TestProtocolClient with details."""
+        self.protocol.addError(
+            self.test, details=self.sample_tb_details)
+        self.assertEqual(
+            self.io.getvalue(),
+            ("error: %s [ multipart\n"
+            "Content-Type: text/plain\n"
+            "something\n"
+            "F\r\nserialised\nform0\r\n"
+            "Content-Type: text/x-traceback;charset=utf8,language=python\n"
+            "traceback\n"
+            "1A\r\n" + _remote_exception_str + ": boo qux\n0\r\n"
+            "]\n") % self.test.id())
+
+    def test_add_expected_failure(self):
+        """Test addExpectedFailure on a TestProtocolClient."""
+        self.protocol.addExpectedFailure(
+            self.test, subunit.RemoteError("phwoar crikey"))
         self.assertEqual(
             self.io.getvalue(),
-            'error: %s [\n'
-            "RemoteException: phwoar\n"
+            ('xfail: %s [\n' +
+            _remote_exception_str + ": phwoar crikey\n"
+            "]\n") % self.test.id())
+
+    def test_add_expected_failure_details(self):
+        """Test addExpectedFailure on a TestProtocolClient with details."""
+        self.protocol.addExpectedFailure(
+            self.test, details=self.sample_tb_details)
+        self.assertEqual(
+            self.io.getvalue(),
+            ("xfail: %s [ multipart\n"
+            "Content-Type: text/plain\n"
+            "something\n"
+            "F\r\nserialised\nform0\r\n"
+            "Content-Type: text/x-traceback;charset=utf8,language=python\n"
+            "traceback\n"
+            "1A\r\n"+ _remote_exception_str + ": boo qux\n0\r\n"
+            "]\n") % self.test.id())
+
+    def test_add_skip(self):
+        """Test addSkip on a TestProtocolClient."""
+        self.protocol.addSkip(
+            self.test, "Has it really?")
+        self.assertEqual(
+            self.io.getvalue(),
+            'skip: %s [\nHas it really?\n]\n' % self.test.id())
+    
+    def test_add_skip_details(self):
+        """Test addSkip on a TestProtocolClient with details."""
+        details = {'reason':Content(
+            ContentType('text', 'plain'), lambda:['Has it really?'])}
+        self.protocol.addSkip(
+            self.test, details=details)
+        self.assertEqual(
+            self.io.getvalue(),
+            "skip: %s [ multipart\n"
+            "Content-Type: text/plain\n"
+            "reason\n"
+            "E\r\nHas it really?0\r\n"
             "]\n" % self.test.id())
 
+    def test_progress_set(self):
+        self.protocol.progress(23, subunit.PROGRESS_SET)
+        self.assertEqual(self.io.getvalue(), 'progress: 23\n')
+
+    def test_progress_neg_cur(self):
+        self.protocol.progress(-23, subunit.PROGRESS_CUR)
+        self.assertEqual(self.io.getvalue(), 'progress: -23\n')
+
+    def test_progress_pos_cur(self):
+        self.protocol.progress(23, subunit.PROGRESS_CUR)
+        self.assertEqual(self.io.getvalue(), 'progress: +23\n')
+
+    def test_progress_pop(self):
+        self.protocol.progress(1234, subunit.PROGRESS_POP)
+        self.assertEqual(self.io.getvalue(), 'progress: pop\n')
+
+    def test_progress_push(self):
+        self.protocol.progress(1234, subunit.PROGRESS_PUSH)
+        self.assertEqual(self.io.getvalue(), 'progress: push\n')
+
+    def test_time(self):
+        # Calling time() outputs a time signal immediately.
+        self.protocol.time(
+            datetime.datetime(2009,10,11,12,13,14,15, iso8601.Utc()))
+        self.assertEqual(
+            "time: 2009-10-11 12:13:14.000015Z\n",
+            self.io.getvalue())
+
+    def test_add_unexpected_success(self):
+        """Test addUnexpectedSuccess on a TestProtocolClient."""
+        self.protocol.addUnexpectedSuccess(self.test)
+        self.assertEqual(
+            self.io.getvalue(), "successful: %s\n" % self.test.id())
+
+    def test_add_unexpected_success_details(self):
+        """Test addUnexpectedSuccess on a TestProtocolClient with details."""
+        self.protocol.addUnexpectedSuccess(self.test, details=self.sample_details)
+        self.assertEqual(
+            self.io.getvalue(), "successful: %s [ multipart\n"
+                "Content-Type: text/plain\n"
+                "something\n"
+                "F\r\nserialised\nform0\r\n]\n" % self.test.id())
+
 
 def test_suite():
     loader = subunit.tests.TestUtil.TestLoader()
diff --git a/lib/subunit/python/subunit/tests/test_test_results.py b/lib/subunit/python/subunit/tests/test_test_results.py
new file mode 100644
index 0000000000..fe82c04b06
--- /dev/null
+++ b/lib/subunit/python/subunit/tests/test_test_results.py
@@ -0,0 +1,199 @@
+#
+#  subunit: extensions to Python unittest to get test results from subprocesses.
+#  Copyright (C) 2009  Robert Collins <robertc@robertcollins.net>
+#
+#  Licensed under either the Apache License, Version 2.0 or the BSD 3-clause
+#  license at the users choice. A copy of both licenses are available in the
+#  project source as Apache-2.0 and BSD. You may not use this file except in
+#  compliance with one of these two licences.
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under these licenses is distributed on an "AS IS" BASIS, WITHOUT
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+#  license you chose for the specific language governing permissions and
+#  limitations under that license.
+#
+
+import datetime
+import unittest
+from StringIO import StringIO
+import os
+import sys
+
+from testtools.content_type import ContentType
+from testtools.content import Content
+
+import subunit
+import subunit.iso8601 as iso8601
+import subunit.test_results
+
+
+class LoggingDecorator(subunit.test_results.HookedTestResultDecorator):
+
+    def __init__(self, decorated):
+        self._calls = 0
+        super(LoggingDecorator, self).__init__(decorated)
+
+    def _before_event(self):
+        self._calls += 1
+
+
+class AssertBeforeTestResult(LoggingDecorator):
+    """A TestResult for checking preconditions."""
+
+    def __init__(self, decorated, test):
+        self.test = test
+        super(AssertBeforeTestResult, self).__init__(decorated)
+
+    def _before_event(self):
+        self.test.assertEqual(1, self.earlier._calls)
+        super(AssertBeforeTestResult, self)._before_event()
+
+
+class TimeCapturingResult(unittest.TestResult):
+
+    def __init__(self):
+        super(TimeCapturingResult, self).__init__()
+        self._calls = []
+
+    def time(self, a_datetime):
+        self._calls.append(a_datetime)
+
+
+class TestHookedTestResultDecorator(unittest.TestCase):
+
+    def setUp(self):
+        # An end to the chain
+        terminal = unittest.TestResult()
+        # Asserts that the call was made to self.result before asserter was
+        # called.
+        asserter = AssertBeforeTestResult(terminal, self)
+        # The result object we call, which much increase its call count.
+        self.result = LoggingDecorator(asserter)
+        asserter.earlier = self.result
+        self.decorated = asserter
+
+    def tearDown(self):
+        # The hook in self.result must have been called
+        self.assertEqual(1, self.result._calls)
+        # The hook in asserter must have been called too, otherwise the
+        # assertion about ordering won't have completed.
+        self.assertEqual(1, self.decorated._calls)
+
+    def test_startTest(self):
+        self.result.startTest(self)
+        
+    def test_startTestRun(self):
+        self.result.startTestRun()
+        
+    def test_stopTest(self):
+        self.result.stopTest(self)
+        
+    def test_stopTestRun(self):
+        self.result.stopTestRun()
+
+    def test_addError(self):
+        self.result.addError(self, subunit.RemoteError())
+        
+    def test_addError_details(self):
+        self.result.addError(self, details={})
+        
+    def test_addFailure(self):
+        self.result.addFailure(self, subunit.RemoteError())
+
+    def test_addFailure_details(self):
+        self.result.addFailure(self, details={})
+
+    def test_addSuccess(self):
+        self.result.addSuccess(self)
+
+    def test_addSuccess_details(self):
+        self.result.addSuccess(self, details={})
+
+    def test_addSkip(self):
+        self.result.addSkip(self, "foo")
+
+    def test_addSkip_details(self):
+        self.result.addSkip(self, details={})
+
+    def test_addExpectedFailure(self):
+        self.result.addExpectedFailure(self, subunit.RemoteError())
+
+    def test_addExpectedFailure_details(self):
+        self.result.addExpectedFailure(self, details={})
+
+    def test_addUnexpectedSuccess(self):
+        self.result.addUnexpectedSuccess(self)
+
+    def test_addUnexpectedSuccess_details(self):
+        self.result.addUnexpectedSuccess(self, details={})
+
+    def test_progress(self):
+        self.result.progress(1, subunit.PROGRESS_SET)
+
+    def test_wasSuccessful(self):
+        self.result.wasSuccessful()
+
+    def test_shouldStop(self):
+        self.result.shouldStop
+
+    def test_stop(self):
+        self.result.stop()
+
+    def test_time(self):
+        self.result.time(None)
+ 
+
+class TestAutoTimingTestResultDecorator(unittest.TestCase):
+
+    def setUp(self):
+        # And end to the chain which captures time events.
+        terminal = TimeCapturingResult()
+        # The result object under test.
+        self.result = subunit.test_results.AutoTimingTestResultDecorator(
+            terminal)
+        self.decorated = terminal
+
+    def test_without_time_calls_time_is_called_and_not_None(self):
+        self.result.startTest(self)
+        self.assertEqual(1, len(self.decorated._calls))
+        self.assertNotEqual(None, self.decorated._calls[0])
+
+    def test_no_time_from_progress(self):
+        self.result.progress(1, subunit.PROGRESS_CUR)
+        self.assertEqual(0, len(self.decorated._calls))
+
+    def test_no_time_from_shouldStop(self):
+        self.decorated.stop()
+        self.result.shouldStop
+        self.assertEqual(0, len(self.decorated._calls))
+
+    def test_calling_time_inhibits_automatic_time(self):
+        # Calling time() outputs a time signal immediately and prevents
+        # automatically adding one when other methods are called.
+        time = datetime.datetime(2009,10,11,12,13,14,15, iso8601.Utc())
+        self.result.time(time)
+        self.result.startTest(self)
+        self.result.stopTest(self)
+        self.assertEqual(1, len(self.decorated._calls))
+        self.assertEqual(time, self.decorated._calls[0])
+
+    def test_calling_time_None_enables_automatic_time(self):
+        time = datetime.datetime(2009,10,11,12,13,14,15, iso8601.Utc())
+        self.result.time(time)
+        self.assertEqual(1, len(self.decorated._calls))
+        self.assertEqual(time, self.decorated._calls[0])
+        # Calling None passes the None through, in case other results care.
+        self.result.time(None)
+        self.assertEqual(2, len(self.decorated._calls))
+        self.assertEqual(None, self.decorated._calls[1])
+        # Calling other methods doesn't generate an automatic time event.
+        self.result.startTest(self)
+        self.assertEqual(3, len(self.decorated._calls))
+        self.assertNotEqual(None, self.decorated._calls[2])
+
+
+def test_suite():
+    loader = subunit.tests.TestUtil.TestLoader()
+    result = loader.loadTestsFromName(__name__)
+    return result
diff --git a/lib/subunit/tap2subunit b/lib/subunit/tap2subunit
deleted file mode 100755
index 9e335168f5..0000000000
--- a/lib/subunit/tap2subunit
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/usr/bin/perl
-# Simple script that converts Perl test harness output to 
-# Subunit
-# Copyright (C) 2008 Jelmer Vernooij <jelmer@samba.org>
-# Published under the GNU GPL, v3 or later
-
-my $firstline = 1;
-my $error = 0;
-while(<STDIN>) {
-	if ($firstline) {
-		$firstline = 0;
-		next;
-	}
-	if (/^not ok (\d+) - (.*)$/) {
-		print "test: $2\n";
-		print "failure: $2\n";
-		$error = 1;
-	} elsif (/^ok (\d+) - (.*)$/) {
-		print "test: $2\n";
-		print "success: $2\n";
-	} elsif (/^ok (\d+)$/) {
-		print "test: $1\n";
-		print "success: $1\n";
-	} elsif (/^ok (\d+) # skip (.*)$/) {
-		print "test: $1\n";
-		print "skip: $1 [\n$2\n]\n";
-	} elsif (/^not ok (\d+)$/) {
-		print "test: $1\n";
-		print "failure: $1\n";
-		$error = 1;
-	} else {
-		print;
-	}
-}
-exit $error;
diff --git a/lib/subunit/update.sh b/lib/subunit/update.sh
index 6ef9859c82..6d996cdfd5 100755
--- a/lib/subunit/update.sh
+++ b/lib/subunit/update.sh
@@ -5,9 +5,9 @@ TARGETDIR="`dirname $0`"
 WORKDIR="`mktemp -d`"
 bzr branch lp:subunit "$WORKDIR/subunit"
 
-for p in python filters; 
+for p in python/ filters/tap2subunit;
 do
-	rsync -avz --delete "$WORKDIR/subunit/$p/" "$TARGETDIR/$p/"
+	rsync -avz --delete "$WORKDIR/subunit/$p" "$TARGETDIR/$p"
 done
 
 rm -rf "$WORKDIR"