doc: Add talloc tutorial.

Signed-off-by: Andreas Schneider <asn@samba.org>

13 files changed, 873 insertions, 1 deletions

diff --git a/lib/talloc/doc/context.png b/lib/talloc/doc/context.png
new file mode 100644
index 0000000000..48a6ca0e6a
--- /dev/null
+++ b/lib/talloc/doc/context.png
diff --git a/lib/talloc/doc/context_tree.png b/lib/talloc/doc/context_tree.png
new file mode 100644
index 0000000000..9723459337
--- /dev/null
+++ b/lib/talloc/doc/context_tree.png
diff --git a/lib/talloc/doc/mainpage.dox b/lib/talloc/doc/mainpage.dox
index 3204e8a5c2..3b56898a08 100644
--- a/lib/talloc/doc/mainpage.dox
+++ b/lib/talloc/doc/mainpage.dox
@@ -10,6 +10,11 @@
  * <a href="http://samba.org/ftp/talloc" target="_blank">talloc directory</a>
  * on the samba public source archive.
  *
+ * @section main-tutorial Tutorial
+ *
+ * You should start by reading @subpage libtalloc_tutorial, then reading the documentation of
+ * the interesting functions as you go.
+
  * @section talloc_bugs Discussion and bug reports
  *
  * talloc does not currently have its own mailing list or bug tracking system.
diff --git a/lib/talloc/doc/stealing.png b/lib/talloc/doc/stealing.png
new file mode 100644
index 0000000000..8833e06a18
--- /dev/null
+++ b/lib/talloc/doc/stealing.png
diff --git a/lib/talloc/doc/tutorial_bestpractices.dox b/lib/talloc/doc/tutorial_bestpractices.dox
new file mode 100644
index 0000000000..034d63aa11
--- /dev/null
+++ b/lib/talloc/doc/tutorial_bestpractices.dox
@@ -0,0 +1,192 @@
+/**
+@page libtalloc_bestpractices Chapter 7: Best practises
+
+The following sections contain several best practices and good manners that were
+found by the <a href="http://www.samba.org">Samba</a> and
+<a href="https://fedorahosted.org/sssd">SSSD</a> developers over the years.
+These will help you to write better code, easier to debug and with as few
+(hopefully none) memory leaks as possible.
+
+@section bp-hierarchy Keep the context hierarchy steady
+
+The talloc is a hierarchy memory allocator. The hierarchy nature is what makes
+the programming more error proof. It makes the memory easier to manage and free.
+Therefore, the first thing we should have on our mind is: always project our
+data structures into the talloc context hierarchy.
+
+That means if we have a structure, we should always use it as a parent context
+for its elements. This way we will not encounter any troubles when freeing this
+structure or when changing its parent. The same rule applies for arrays.
+
+For example, the structure <code>user</code> from section @ref context-hierarchy
+should be created with the context hierarchy illustrated on the next image.
+
+@image html context_tree.png
+
+@section bp-tmpctx Every function should use its own context
+
+It is a good practice to create a temporary talloc context at the function
+beginning and free this context just before the return statement. All the data
+must be allocated on this context or on its children. This ensures that no
+memory leaks are created as long as we do not forget to free the temporary
+context.
+
+This pattern applies to both situations - when a function does not return any
+dynamically allocated value and when it does. However, it needs a little
+extension for the latter case.
+
+@subsection bp-tmpctx-1 Functions that do not return any dynamically allocated
+value
+
+If the function does not return any value created on the heap, we will just obey
+the aforementioned pattern.
+
+@code
+int bar()
+{
+  int ret;
+  TALLOC_CTX *tmp_ctx = talloc_new(NULL);
+  if (tmp_ctx == NULL) {
+    ret = ENOMEM;
+    goto done;
+  }
+  /* allocate data on tmp_ctx or on its descendants */
+  ret = EOK;
+done:
+  talloc_free(tmp_ctx);
+  return ret;
+}
+@endcode
+
+@subsection bp-tmpctx-2 Functions returning dynamically allocated values
+
+If our function returns any dynamically allocated data, its first parameter
+should always be the destination talloc context. This context serves as a parent
+for the output values. But again, we will create the output values as the
+descendants of the temporary context. If everything goes well, we will change
+the parent of the output values from the temporary to the destination talloc
+context.
+
+This pattern ensures that if an error occurs (e.g. I/O error or insufficient
+amount of the memory), all allocated data is freed and no garbage appears on
+the destination context.
+
+@code
+int struct_foo_init(TALLOC_CTX *mem_ctx, struct foo **_foo)
+{
+  int ret;
+  struct foo *foo = NULL;
+  TALLOC_CTX *tmp_ctx = talloc_new(NULL);
+  if (tmp_ctx == NULL) {
+    ret = ENOMEM;
+    goto done;
+  }
+  foo = talloc_zero(tmp_ctx, struct foo);
+  /* ... */
+  *_foo = talloc_steal(mem_ctx, foo);
+  ret = EOK;
+done:
+  talloc_free(tmp_ctx);
+  return ret;
+}
+@endcode
+
+@section bp-null Allocate temporary contexts on NULL
+
+As it can be seen on the previous listing, instead of allocating the temporary
+context directly on <code>mem_ctx</code>, we created a new top level context
+using <code>NULL</code> as the parameter for <code>talloc_new()</code> function.
+Take a look at the following example:
+
+@code
+char * create_user_filter(TALLOC_CTX *mem_ctx,
+                          uid_t uid, const char *username)
+{
+  char *filter = NULL;
+  char *sanitized_username = NULL;
+  /* tmp_ctx is a child of mem_ctx */
+  TALLOC_CTX *tmp_ctx = talloc_new(mem_ctx);
+  if (tmp_ctx == NULL) {
+    return NULL;
+  }
+
+  sanitized_username = sanitize_string(tmp_ctx, username);
+  if (sanitized_username == NULL) {
+    talloc_free(tmp_ctx);
+    return NULL;
+  }
+
+  filter = talloc_aprintf(tmp_ctx,"(|(uid=%llu)(uname=%s))",
+                          uid, sanitized_username);
+  if (filter == NULL) {
+    return NULL; /* tmp_ctx is not freed */ (*@\label{lst:tmp-ctx-3:leak}@*)
+  }
+
+  /* filter becomes a child of mem_ctx */
+  filter = talloc_steal(mem_ctx, filter);
+  talloc_free(tmp_ctx);
+  return filter;
+}
+@endcode
+
+We forgot to free <code>tmp_ctx</code> before the <code>return</code> statement
+in the <code>filter == NULL</code> condition. However, it is created as a child
+of <code>mem_ctx</code> context and as such it will be freed as soon as the
+<code>mem_ctx</code> is freed. Therefore, no detectable memory leak is created.
+
+On the other hand, we do not have any way to access the allocated data
+and for all we know <code>mem_ctx</code> may exist for the lifetime of our
+application. For these reasons this should be considered as a memory leak. How
+can we detect if it is unreferenced but still attached to its parent context?
+The only way is to notice the mistake in the source code.
+
+But if we create the temporary context as a top level context, it will not be
+freed and memory diagnostic tools
+(e.g. <a href="http://valgrind.org">valgrind</a>) are able to do their job.
+
+@section bp-pool Temporary contexts and the talloc pool
+
+If we want to take the advantage of the talloc pool but also keep to the
+pattern introduced in the previous section, we are unable to do it directly. The
+best thing to do is to create a conditional build where we can decide how do we
+want to create the temporary context. For example, we can create the following
+macros:
+
+@code
+#ifdef USE_POOL_CONTEXT
+  #define CREATE_POOL_CTX(ctx, size) talloc_pool(ctx, size)
+  #define CREATE_TMP_CTX(ctx)        talloc_new(ctx)
+#else
+  #define CREATE_POOL_CTX(ctx, size) talloc_new(ctx)
+  #define CREATE_TMP_CTX(ctx)        talloc_new(NULL)
+#endif
+@endcode
+
+Now if our application is under development, we will build it with macro
+<code>USE_POOL_CONTEXT</code> undefined. This way, we  can use memory diagnostic
+utilities to detect memory leaks.
+
+The release version will be compiled with the macro defined. This will  enable
+pool contexts and therefore reduce the <code>malloc()</code> calls, which will
+end up in a little bit faster processing.
+
+@code
+int struct_foo_init(TALLOC_CTX *mem_ctx, struct foo **_foo)
+{
+  int ret;
+  struct foo *foo = NULL;
+  TALLOC_CTX *tmp_ctx = CREATE_TMP_CTX(mem_ctx);
+  /* ... */
+}
+
+errno_t handle_request(TALLOC_CTX mem_ctx)
+{
+  int ret;
+  struct foo *foo = NULL;
+  TALLOC_CTX *pool_ctx = CREATE_POOL_CTX(NULL, 1024);
+  ret = struct_foo_init(mem_ctx, &foo);
+  /* ... */
+}
+@endcode
+
+*/
\ No newline at end of file
diff --git a/lib/talloc/doc/tutorial_context.dox b/lib/talloc/doc/tutorial_context.dox
new file mode 100644
index 0000000000..214131878f
--- /dev/null
+++ b/lib/talloc/doc/tutorial_context.dox
@@ -0,0 +1,196 @@
+/**
+@page libtalloc_context Chapter 1: Talloc context
+@section context Talloc context
+
+The talloc context is the most important part of this library for it is
+responsible for every single feature of this memory allocator. It is a logical
+unit which represents a memory space managed by talloc.
+
+From the programmer's point of view, the talloc context is completely
+equivalent to a pointer that would be returned by the memory routines from the
+C standard library. This means that every context that is returned from the
+talloc library can be used directly in functions that do not use talloc
+internally. For example we can do the following:
+
+@code
+char *str1 = strdup("I am NOT a talloc context");
+char *str2 = talloc_strdup(NULL, "I AM a talloc context");
+
+printf("%d\n", strcmp(str1, str2) == 0);
+
+free(str1);
+talloc_free(str2); /* we can not use free(str2) */
+@endcode
+
+This is possible because the context is internally handled as a special
+fixed-length structure called talloc chunk. Each chunk stores context metadata
+followed by the memory space requested by the programmer. When a talloc
+function returns a context (pointer), it in fact returns a pointer to the user
+space portion of the talloc chunk. And when we want to manipulate with this
+context using talloc functions, the talloc library transforms the user-space
+pointer back to the starting address of the chunk. This is also the reason why
+we were unable to use <code>free(str2)</code> in the previous example - because
+<code>str2</code> does not point at the beginning of the allocated block of
+memory. This is illustrated on the next image:
+
+@image html context.png
+
+The type TALLOC_CTX is defined in talloc.h to identify a talloc context in
+function parameters. However, this type is just an alias for <code>void</code>
+and exists only for semantical reasons - thus we can differentiate between
+<code>void*</code> (arbitrary data) and TALLOC_CTX* (talloc context).
+
+@subsection metadata Context meta data
+Every talloc context carries several pieces of internal information along with
+the allocated memory:
+
+  - name - which is used in reports of context hierarchy and to simulate
+    a dynamic type system,
+  - size of the requested memory in bytes - this can be used to determine
+    the number of elements in arrays,
+  - attached destructor - which is executed just before the memory block is
+    about to be freed,
+  - references to the context
+  - children and parent contexts - create the hierarchical view on the
+    memory.
+
+@section context-hierarchy Hierarchy of talloc context
+
+Every talloc context contains information about its parent and children. Talloc
+uses this information to create a hierarchical model of memory or to be more
+precise, it creates an n-ary tree where each node represents a single talloc
+context. The root node of the tree is referred to as a top level context - a
+context without any parent.
+
+This approach has several advantages:
+
+  - as a consequence of freeing a talloc context, all of its children
+    will be properly deallocated as well,
+  - the parent of a context can be changed at any time, which
+    results in moving the whole subtree under another node,
+  - it creates a more natural way of managing data structures.
+
+@subsection Example
+
+We have a structure that stores basic information about a user - his/her name,
+identification number and groups he/she is a member of:
+
+@code
+struct user {
+  uid_t uid;
+  char *username;
+  size_t num_groups;
+  char **groups;
+};
+@endcode
+
+We will allocate this structure using talloc. The result will be the following
+context tree:
+
+@image html context_tree.png
+
+@code
+/* create new top level context */
+struct user *user = talloc(NULL, struct user);
+
+user->uid = 1000;
+user->num_groups = N;
+
+/* make user the parent of following contexts */
+user->username = talloc_strdup(user, "Test user");
+user->groups = talloc_array(user, char*, user->num_groups);
+
+for (i = 0; i < user->num_groups; i++) {
+  /* make user->groups the parent of following context */
+  user->groups[i] = talloc_asprintf(user->groups,
+                                    "Test group %d", i);
+}
+@endcode
+
+This way, we have gained a lot of additional capabilities, one of which is
+very simple deallocation of the structure and all of its elements.
+
+With the C standard library we need first to iterate over the array of groups
+and free every element separately. Then we must deallocate the array that stores
+them. Next we deallocate the username and as the last step free the structure
+itself. But with talloc, the only operation we need to execute is freeing the
+structure context. Its descendants will be freed automatically.
+
+@code
+talloc_free(user);
+@endcode
+
+@section keep-hierarchy Always keep the hieararchy steady!
+
+The talloc is a hierarchy memory allocator. The hierarchy nature is what makes
+the programming more error proof. It makes the memory easier to manage and free.
+Therefore, the first thing we should have on our mind is: <strong>always project
+our data structures into the talloc context hierarchy</strong>.
+
+That means if we have a structure, we should always use it as a parent context
+for its elements. This way we will not encounter any troubles when freeing this
+structure or when changing its parent. The same rule applies for arrays.
+
+@section creating-context Creating a talloc context
+
+Here are the most important functions that creates a new talloc context.
+
+@subsection type-safe Type-safe functions
+
+It allocates the size that is necessary for the this type and returns a
+new, properly-cast pointer. This is the preferred way to create a new context
+as we can rely on the compiler to detect type mismatches.
+
+They automatically set the name of the context to the name of the data type.
+Which is used to simulate the dynamic type system.
+
+@code
+struct user *user = talloc(ctx, struct user);
+
+/* initialize to default values */
+user->uid = 0;
+user->name = NULL;
+user->num_groups = 0;
+user->groups = NULL;
+
+/* or we can achieve the same result with */
+struct user *user_zero = talloc_zero(ctx, struct user);
+@endcode
+
+@subsection zero-length Zero-lenght contexts
+
+The zero-length context is basically a context without any special semantical
+meaning. We can use it the same way as any other context. The only difference
+is that it consists only of the meta data about the context. Therefore, it is
+strictly of type |TALLOC_CTX*|. It is often used in cases where we want to
+aggregate several data structures under one parent (zero-length) context, such
+as a temporary context to contain memory needed within a single function that
+is not interesting to the caller. Allocating on a zero-length temporary context
+will make clean-up of the function simpler.
+
+@code
+TALLOC_CTX *ctx = NULL;
+struct foo *foo = NULL;
+struct bar *bar = NULL;
+
+/* new zero-length top level context */
+ctx = talloc_new(NULL);
+if (ctx == NULL) {
+  return ENOMEM;
+}
+
+foo = talloc(ctx, struct foo);
+bar = talloc(ctx, struct bar);
+
+/* free everything at once */
+talloc_free(ctx);
+@endcode
+
+@subsection context-see-also See also
+
+- talloc_size()
+- talloc_named()
+- @ref talloc_array
+- @ref talloc_string
+
+*/
\ No newline at end of file
diff --git a/lib/talloc/doc/tutorial_debugging.dox b/lib/talloc/doc/tutorial_debugging.dox
new file mode 100644
index 0000000000..0cc0866370
--- /dev/null
+++ b/lib/talloc/doc/tutorial_debugging.dox
@@ -0,0 +1,115 @@
+/**
+@page libtalloc_debugging Chapter 6: Debugging
+
+Although talloc makes memory management significantly easier than the C standard
+library, developers are still only humans and can make mistakes. Therefore, it
+can be handy to know some tools for the inspection of talloc memory usage.
+
+@section log-abort Talloc log and abort
+
+We have already encountered the abort function in section @ref dts.
+In that case it was used when a type mismatch was detected. However, talloc
+calls this abort function in several more situations:
+
+- when the provided pointer is not a valid talloc context,
+- when the meta data is invalid - probably due to memory corruption,
+- and when an access after free is detected.
+
+The third one is probably the most interesting. It can help us with detecting
+an attempt to double-free a context or any other manipulation with it via
+talloc functions (using it as a parent, stealing it, etc.).
+
+Before the context is freed talloc sets a flag in the meta data. This is then
+used to detect the access after free. It basically works on the assumption that
+the memory stays unchanged (at least for a while) even when it is properly
+deallocated. This will work even if the memory is filled with the value
+specified in <code>TALLOC_FREE_FILL</code> environment variable, because it
+fills only the data part and leaves the meta data intact.
+
+Apart from the abort function, talloc uses a log function to provide additional
+information to the aforementioned violations. To enable logging we shall set the
+log function with one of:
+
+- talloc_set_log_fn()
+- talloc_set_log_stderr()
+
+Below given is an sample output of accessing a context after it has been freed:
+
+@code
+talloc_set_log_stderr();
+TALLOC_CTX *ctx = talloc_new(NULL);
+
+talloc_free(ctx);
+talloc_free(ctx);
+
+results in:
+talloc: access after free error - first free may be at ../src/main.c:55
+Bad talloc magic value - access after free
+@endcode
+
+Another example below is an example of the invalid context:
+
+@code
+talloc_set_log_stderr();
+TALLOC_CTX *ctx = talloc_new(NULL);
+char *str = strdup("not a talloc context");
+talloc_steal(ctx, str);
+
+results in:
+Bad talloc magic value - unknown value
+@endcode
+
+@section reports Memory usage reports
+
+Talloc can print reports of memory usage of specified talloc context to a file
+(or to <code>stdout</code> or <code>stderr</code>). The report can be simple or
+full. The simple report provides information only about the context itself and
+its direct descendants. The full report goes recursively through the entire
+context tree. See:
+
+- talloc_report()
+- talloc_report_full()
+
+We will use following code to retrieve the sample report:
+
+@code
+struct foo {
+  char *str;
+};
+
+TALLOC_CTX *ctx = talloc_new(NULL);
+char *str =  talloc_strdup(ctx, "my string");
+struct foo *foo = talloc_zero(ctx, struct foo);
+foo->str = talloc_strdup(foo, "I am Foo");
+char *str2 = talloc_strdup(foo, "Foo is my parent");
+
+/* print full report */
+talloc_report_full(ctx, stdout);
+@endcode
+
+It will print a full report of <code>ctx</code> to the standard output.
+The message should be similar to:
+
+@code
+full talloc report on 'talloc_new: ../src/main.c:82' (total 46 bytes in 5 blocks)
+  struct foo contains 34 bytes in 3 blocks (ref 0) 0x1495130
+    Foo is my parent contains 17 bytes in 1 blocks (ref 0) 0x1495200
+    I am Foo contains 9 bytes in 1 blocks (ref 0) 0x1495190
+  my string contains 10 bytes in 1 blocks (ref 0) 0x14950c0
+@endcode
+
+We can notice in this report that something is wrong with the context containing
+<code>struct foo</code>. We know that the structure has only one string element.
+However, we can see in the report that it has two children. This indicates that
+we have either violated the memory hierarchy or forgotten to free it as
+temporary data. Looking into the code, we can see that <code>"Foo is my parent"
+</code> should be attached to <code>ctx</code>.
+
+See also:
+
+- talloc_enable_null_tracking()
+- talloc_disable_null_tracking()
+- talloc_enable_leak_report()
+- talloc_enable_leak_report_full()
+
+*/
\ No newline at end of file
diff --git a/lib/talloc/doc/tutorial_destructors.dox b/lib/talloc/doc/tutorial_destructors.dox
new file mode 100644
index 0000000000..178f4cc4a8
--- /dev/null
+++ b/lib/talloc/doc/tutorial_destructors.dox
@@ -0,0 +1,81 @@
+/**
+@page libtalloc_destructors Chapter 4: Using destructors
+@section destructors Using destructors
+
+Destructors are well known methods in the world of object oriented programming.
+A destructor is a method of an object that is automatically run when the object
+is destroyed. It is usually used to return resources taken by the object back to
+the system (e.g. closing file descriptors, terminating connection to a database,
+deallocating memory).
+
+With talloc we can take the advantage of destructors even in C. We can easily
+attach our own destructor to a talloc context. When the context is freed, the
+destructor is run automatically.
+
+To attach/detach a destructor to a talloc context use: talloc_set_destructor().
+
+@section destructors-example Example
+
+Imagine that we have a dynamically created linked list. Before we deallocate an
+element of the list, we need to make sure that we have successfully removed it
+from the list. Normally, this would be done by two commands in the exact order:
+remove it from the list and then free the element. With talloc, we can do this
+at once by setting a destructor on the element which will remove it from the
+list and talloc_free() will do the rest.
+
+The destructor would be:
+
+@code
+int list_remove(void *ctx)
+{
+    struct list_el *el = NULL;
+    el = talloc_get_type_abort(ctx, struct list_el);
+    /* remove element from the list */
+}
+@endcode
+
+GCC3+ can check for the types during the compilation. So if it is
+our major compiler, we can use a little bit nicer destructor:
+
+@code
+int list_remove(struct list_el *el)
+{
+    /* remove element from the list */
+}
+@endcode
+
+Now we will assign the destructor to the list element. We can do this directly
+in the function that inserts it.
+
+@code
+struct list_el* list_insert(TALLOC_CTX *mem_ctx,
+                            struct list_el *where,
+                            void *ptr)
+{
+  struct list_el *el = talloc(mem_ctx, struct list_el);
+  el->data = ptr;
+  /* insert into list */
+
+  talloc_set_destructor(el, list_remove);
+  return el;
+}
+@endcode
+
+Because talloc is a hierarchical memory allocator, we can go a step further and
+free the data with the element as well:
+
+@code
+struct list_el* list_insert_free(TALLOC_CTX *mem_ctx,
+                                 struct list_el *where,
+                                 void *ptr)
+{
+  struct list_el *el = NULL;
+  el = list_insert(mem_ctx, where, ptr);
+
+  talloc_steal(el, ptr);
+
+  return el;
+}
+@endcode
+
+*/
\ No newline at end of file
diff --git a/lib/talloc/doc/tutorial_dts.dox b/lib/talloc/doc/tutorial_dts.dox
new file mode 100644
index 0000000000..9065d7a1f0
--- /dev/null
+++ b/lib/talloc/doc/tutorial_dts.dox
@@ -0,0 +1,108 @@
+/**
+@page libtalloc_dts Chapter 3: Dynamic type system
+@section dts Dynamic type system
+
+Generic programming in the C language is very difficult. There is no inheritance
+nor templates known from object oriented languages. There is no dynamic type
+system. Therefore, generic programming in this language is usually done by
+type-casting a variable to |void*| and transferring it through a generic function
+to a specialized callback as illustrated on the next listing.
+
+@code
+void generic_function(callback_fn cb, void *pvt)
+{
+  /* do some stuff and call the callback */
+  cb(pvt);
+}
+
+void specific_callback(void *pvt)
+{
+  struct specific_struct *data;
+  data = (struct specific_struct*)pvt;
+  /* ... */
+}
+
+void specific_function()
+{
+  struct specific_struct data;
+  generic_function(callback, &data);
+}
+@endcode
+
+Unfortunately, the type information is lost as a result of this type cast. The
+compiler cannot check the type during the compilation nor are we able to do it
+at runtime. Providing an invalid data type to the callback will result
+in unexpected behaviour (not necessarily a crash) of the application. This
+mistake is usually hard to detect because it is not the first thing on the mind
+of the developer.
+
+As we already know, every talloc context contains a name. This name is available
+at any time and it can be used to determine the type of a context even if we
+lose the type of a variable.
+
+Although the name of the context can be set to any arbitrary string, the best
+way of using it to simulate the dynamic type system is to set it directly to the
+type of the variable.
+
+It is recommended to use one of |talloc()| and |talloc_array()| (or its
+variants) to create the context as they set its name to the name of the type
+automatically.
+
+If we have a context with such a name, we can use two similar functions that do
+both the type check and the type cast for us:
+
+- talloc_get_type()
+- talloc_get_type_abort()
+
+@section dts-examples Examples
+
+Below given is an example of generic programming with talloc - if we provide
+invalid data to the callback, the program will be aborted. This is a sufficient
+reaction for such an error in most applications.
+
+@code
+void foo_callback(void *pvt)
+{
+  struct foo *data = talloc_get_type_abort(pvt, struct foo);
+  /* ... */
+}
+
+int do_foo()
+{
+  struct foo *data = talloc_zero(NULL, struct foo);
+  /* ... */
+  return generic_function(foo_callback, data);
+}
+@endcode
+
+But what if we are creating a service application that should be running for the
+uptime of a server? We may want to abort the application during the development
+process (to make sure the error is not overlooked) but try to recover from the
+error in the customer release. This can be achieved by creating a custom abort
+function with a conditional build.
+
+@code
+void my_abort(const char *reason)
+{
+  fprintf(stderr, "talloc abort: %s\n", reason);
+#ifdef ABORT_ON_TYPE_MISMATCH
+  abort();
+#endif
+}
+@endcode
+
+The usage of talloc_get_type_abort() would be then:
+
+@code
+talloc_set_abort_fn(my_abort);
+
+TALLOC_CTX *ctx = talloc_new(NULL);
+char *str = talloc_get_type_abort(ctx, char);
+if (str == NULL) {
+  /* recovery code */
+}
+/* talloc abort: ../src/main.c:25: Type mismatch:
+   name[talloc_new: ../src/main.c:24] expected[char] */
+@endcode
+
+*/
\ No newline at end of file
diff --git a/lib/talloc/doc/tutorial_introduction.dox b/lib/talloc/doc/tutorial_introduction.dox
new file mode 100644
index 0000000000..02777b9f77
--- /dev/null
+++ b/lib/talloc/doc/tutorial_introduction.dox
@@ -0,0 +1,43 @@
+/**
+@page libtalloc_tutorial The Tutorial
+@section introduction Introduction
+
+Talloc is a hierarchical, reference counted memory pool system with destructors.
+It is built atop the C standard library and it defines a set of utility
+functions that altogether simplifies allocation and deallocation of data,
+especially for complex structures that contain many dynamically allocated
+elements such as strings and arrays.
+
+The main goals of this library are: removing the needs for creating a cleanup
+function for every complex structure, providing a logical organization of
+allocated memory blocks and reducing the likelihood of creating memory leaks in
+long-running applications. All of this is achieved by allocating memory in a
+hierarchical structure of talloc contexts such that deallocating one context
+recursively frees all of its descendants as well.
+
+@section main-features Main features
+- An open source project
+- A hierarchical memory model
+- Natural projection of data structures into the memory space
+- Simplifies memory management of large data structures
+- Automatic execution of a destructor before the memory is freed
+- Simulates a dynamic type system
+- Implements a transparent memory pool
+
+@section toc Table of contents:
+
+@subpage libtalloc_context
+
+@subpage libtalloc_stealing
+
+@subpage libtalloc_dts
+
+@subpage libtalloc_destructors
+
+@subpage libtalloc_pools
+
+@subpage libtalloc_debugging
+
+@subpage libtalloc_bestpractices
+
+*/
\ No newline at end of file
diff --git a/lib/talloc/doc/tutorial_pools.dox b/lib/talloc/doc/tutorial_pools.dox
new file mode 100644
index 0000000000..8645b37ee6
--- /dev/null
+++ b/lib/talloc/doc/tutorial_pools.dox
@@ -0,0 +1,92 @@
+/**
+@page libtalloc_pools Chapter 5: Memory pools
+@section pools Memory pools
+
+Allocation of a new memory is an expensive operation and large programs can
+contain thousands of calls of malloc() for a single computation, where every
+call allocates only a very small amount of the memory. This can result in an
+undesirable slowdown of the application. We can avoid this slowdown by
+decreasing the number of malloc() calls by using a memory pool.
+
+Memory pool is a preallocated memory space with a fixed size. If we need to
+allocate new data we will take the desired amount of the memory from the pool
+instead of requesting a new memory from the system. This is done by creating a
+pointer that points inside the preallocated memory. Such a pool must not be
+reallocated as it would change its location - pointers that were pointing
+inside the pool would become invalid. Therefore, a memory pool requires a very
+good estimate of the required memory space.
+
+The talloc library contains its own implementation of a memory pool. It is
+highly transparent for the programmer. The only thing that needs to be done is
+an initialization of a new pool context using talloc_pool() -
+it can be used in the same way as any other context.
+
+Refactoring of existing code (that uses talloc) to take the advantage of a
+memory pool is quite simple due to the following properties of the pool context:
+
+- if we are allocating data on a pool context, it takes the desired
+  amount of memory from the pool,
+- if the context is a descendant of the pool context, it takes the space
+  from the pool as well,
+- if the pool does not have sufficient portion of memory left, it will
+  create a new non-pool context, leaving the pool intact
+
+@code
+/* allocate 1KiB in a pool */
+TALLOC_CTX *pool_ctx = talloc_pool(NULL, 1024);
+
+/* take 512B from the pool, 512B is left there */
+void *ptr = talloc_size(pool_ctx, 512);
+
+/* 1024B > 512B, this will create new talloc chunk outside
+   the pool */
+void *ptr2 = talloc_size(ptr, 1024);
+
+/* the pool still contains 512 free bytes
+ * this will take 200B from them */
+void *ptr3 = talloc_size(ptr, 200);
+
+/* this will destroy context 'ptr3' but the memory
+ * is not freed, the available space in the pool
+ * will increase to 512B */
+talloc_free(ptr3);
+
+/* this will free memory taken by 'pool_ctx'
+ *  and 'ptr2' as well */
+talloc_free(pool_ctx);
+@endcode
+
+The above given is very convenient, but there is one big issue to be kept in
+mind. If the parent of a talloc pool child is changed to a parent that is
+outside of this pool, the whole pool memory will not be freed until the child is
+freed. For this reason we must be very careful when stealing a descendant of a
+pool context.
+
+@code
+TALLOC_CTX *mem_ctx = talloc_new(NULL);
+TALLOC_CTX *pool_ctx = talloc_pool(NULL, 1024);
+struct foo *foo = talloc(pool_ctx, struct foo);
+
+/* mem_ctx is not in the pool */
+talloc_steal(mem_ctx, foo);
+
+/* pool_ctx is marked as freed but the memory is not
+   deallocated, accessing the pool_ctx again will cause
+   an error */
+talloc_free(pool_ctx);
+
+/* now is pool_ctx deallocated */
+talloc_free(mem_ctx);
+@endcode
+
+It may be often better to copy the memory we want to steal to avoid this
+problem. If we do not need to retain the context name (to keep the type
+information), we can use talloc_memdup() to do this.
+
+Copying the memory out of the pool may, however, discard all the performance
+boost given by the pool, depending on the size of the copied memory. Therefore,
+the code should be well profiled before taking this path. In general, the
+golden rule is: if we need to steal from the pool context, we should not
+use the pool context.
+
+*/
\ No newline at end of file
diff --git a/lib/talloc/doc/tutorial_stealing.dox b/lib/talloc/doc/tutorial_stealing.dox
new file mode 100644
index 0000000000..9ac5cbd3f9
--- /dev/null
+++ b/lib/talloc/doc/tutorial_stealing.dox
@@ -0,0 +1,40 @@
+/**
+@page libtalloc_stealing Chapter 2: Stealing a context
+@section stealing Stealing a context
+
+Talloc has the ability to change the parent of a talloc context to another
+one. This operation is commonly referred to as stealing and it is one of
+the most important actions performed with talloc contexts.
+
+Stealing a context is necessary if we want the pointer to outlive the context it
+is created on. This has many possible use cases, for instance stealing a result
+of a database search to an in-memory cache context, changing the parent of a
+field of a generic structure to a more specific one or vice-versa. The most
+common scenario, at least in SSSD, is to steal output data from a function-specific
+context to the output context given as an argument of that function.
+
+@code
+struct foo *foo = talloc_zero(ctx, struct foo);
+foo->a1 = talloc_strdup(foo, "a1");
+foo->a2 = talloc_strdup(foo, "a2");
+foo->a3 = talloc_strdup(foo, "a3");
+
+struct bar *bar = talloc_zero(NULL, struct bar);
+/* change parent of foo from ctx to bar */
+bar->foo = talloc_steal(bar, foo);
+
+/* or do the same but assign foo = NULL */
+bar->foo = talloc_move(bar, &foo);
+@endcode
+
+In general, the pointer itself is not changed (it only replaces the
+parent in the meta data). But the common usage is that the result is assigned
+to another variable, thus further accessing the pointer from the original
+variable should be avoided unless it is necessary. In this case
+talloc_move() is the preferred way of stealing a context as it protects the
+pointer from being accidentally freed and accessed using the old variable after
+its parent has been changed.
+
+@image html stealing.png
+
+*/
\ No newline at end of file
diff --git a/lib/talloc/doxy.config b/lib/talloc/doxy.config
index 5e3a3197ba..1d8e712589 100644
--- a/lib/talloc/doxy.config
+++ b/lib/talloc/doxy.config
@@ -664,7 +664,7 @@ EXAMPLE_RECURSIVE      = NO
 # directories that contain image that are included in the documentation (see
 # the \image command).
 
-IMAGE_PATH             =
+IMAGE_PATH             = doc
 
 # The INPUT_FILTER tag can be used to specify a program that doxygen should
 # invoke to filter for each input file. Doxygen will invoke the filter program