fixes for fedora packaging

(This used to be commit 1924dfb266525053b48a636818f32eae14730051)

2 files changed, 307 insertions, 15 deletions

diff --git a/packaging/Fedora/samba.spec.tmpl b/packaging/Fedora/samba.spec.tmpl
index 475300e3a3..ae6f95c900 100644
--- a/packaging/Fedora/samba.spec.tmpl
+++ b/packaging/Fedora/samba.spec.tmpl
@@ -12,14 +12,15 @@ URL: http://www.samba.org/
 Source: ftp://www.samba.org/pub/samba/%{name}-%{version}.tar.bz2
 
 # Red Hat specific replacement-files
-Source1: samba.log
-Source2: samba.xinetd
-Source3: swat.desktop
-Source4: samba.sysconfig
-Source5: smb.init
-Source6: samba.pamd
-Source7: smbprint
-Source8: winbind.init
+Source1:  samba.log
+Source2:  samba.xinetd
+Source4:  samba.sysconfig
+Source5:  smb.init
+Source6:  winbind.init
+Source7:  samba.pamd
+Source8:  smbprint
+Source9:  smbusers
+Source10: smb.conf
 
 # Don't depend on Net::LDAP
 Source999: filter-requires-samba.sh
@@ -144,21 +145,26 @@ make DESTDIR=$RPM_BUILD_ROOT \
 cd ..
 
 # Install other stuff
-install -m644 packaging/RedHat/smb.conf $RPM_BUILD_ROOT%{_sysconfdir}/samba/smb.conf
+install -m644 %{SOURCE10} $RPM_BUILD_ROOT%{_sysconfdir}/samba/smb.conf
+install -m644 %{SOURCE8} $RPM_BUILD_ROOT/etc/samba/smbusers
+install -m755 %{SOURCE8} $RPM_BUILD_ROOT%{_bindir}
+install -m644 %{SOURCE7} $RPM_BUILD_ROOT/etc/pam.d/samba
+install -m644 %{SOURCE1} $RPM_BUILD_ROOT/etc/logrotate.d/samba
 install -m755 source/script/mksmbpasswd.sh $RPM_BUILD_ROOT%{_bindir}
-install -m644 packaging/RedHat/smbusers $RPM_BUILD_ROOT/etc/samba/smbusers
-install -m755 packaging/RedHat/smbprint $RPM_BUILD_ROOT%{_bindir}
-install -m755 packaging/RedHat/smb.init $RPM_BUILD_ROOT%{initdir}/smb
-install -m755 packaging/RedHat/winbind.init $RPM_BUILD_ROOT%{initdir}/winbind
+
+install -m755 %{SOURCE5} $RPM_BUILD_ROOT%{initdir}/smb
+install -m755 %{SOURCE6} $RPM_BUILD_ROOT%{initdir}/winbind
 ln -s ../..%{initdir}/smb  $RPM_BUILD_ROOT%{_sbindir}/samba
-install -m644 packaging/RedHat/samba.pamd.stack $RPM_BUILD_ROOT/etc/pam.d/samba
-install -m644 $RPM_SOURCE_DIR/samba.log $RPM_BUILD_ROOT/etc/logrotate.d/samba
+ln -s ../..%{initdir}/winbind  $RPM_BUILD_ROOT%{_sbindir}/winbind
+
 ln -s ../usr/bin/smbmount $RPM_BUILD_ROOT/sbin/mount.smb
 ## Samba's Makefile is breaking this currently.  Remove it and set our own
 /bin/rm -f $RPM_BUILD_ROOT/sbin/mount.smbfs
 ln -s ../usr/bin/smbmount $RPM_BUILD_ROOT/sbin/mount.smbfs
+
 echo 127.0.0.1 localhost > $RPM_BUILD_ROOT%{_sysconfdir}/samba/lmhosts
 
+
 # pam_smbpass
 mkdir -p $RPM_BUILD_ROOT/%{_lib}/security
 mv source/bin/pam_smbpass.so $RPM_BUILD_ROOT/%{_lib}/security/pam_smbpass.so
diff --git a/packaging/Fedora/smb.conf b/packaging/Fedora/smb.conf
new file mode 100644
index 0000000000..74806da16b
--- /dev/null
+++ b/packaging/Fedora/smb.conf
@@ -0,0 +1,286 @@
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options listed
+# here. Samba has a huge number of configurable options (perhaps too
+# many!) most of which are not shown in this example
+#
+# Any line which starts with a ; (semi-colon) or a # (hash) 
+# is a comment and is ignored. In this example we will use a #
+# for commentry and a ; for parts of the config file that you
+# may wish to enable
+#
+# NOTE: Whenever you modify this file you should run the command "testparm"
+# to check that you have not made any basic syntactic errors. 
+#
+#======================= Global Settings =====================================
+[global]
+
+# workgroup = NT-Domain-Name or Workgroup-Name
+   workgroup = MYGROUP
+
+# server string is the equivalent of the NT Description field
+   server string = Samba Server
+
+# This option is important for security. It allows you to restrict
+# connections to machines which are on your local network. The
+# following example restricts access to two C class networks and
+# the "loopback" interface. For more examples of the syntax see
+# the smb.conf man page
+;   hosts allow = 192.168.1. 192.168.2. 127.
+
+# if you want to automatically load your printer list rather
+# than setting them up individually then you'll need this
+   printcap name = /etc/printcap
+   load printers = yes
+
+# It should not be necessary to spell out the print system type unless
+# yours is non-standard. Currently supported print systems include:
+# bsd, sysv, plp, lprng, aix, hpux, qnx
+;   printing = bsd
+
+# Uncomment this if you want a guest account, you must add this to /etc/passwd
+# otherwise the user "nobody" is used
+;  guest account = pcguest
+
+# this tells Samba to use a separate log file for each machine
+# that connects
+   log file = /var/log/samba/log.%m
+
+# Put a capping on the size of the log files (in Kb).
+   max log size = 50
+
+# Security mode. Most people will want user level security. See
+# security_level.txt for details.
+   security = user
+# Use password server option only with security = server
+;   password server = <NT-Server-Name>
+
+# Password Level allows matching of _n_ characters of the password for
+# all combinations of upper and lower case.
+;  password level = 8
+;  username level = 8
+
+# You may wish to use password encryption. Please read
+# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
+# Do not enable this option unless you have read those documents
+;  encrypt passwords = yes
+;  smb passwd file = /etc/samba/smbpasswd
+
+# The following are needed to allow password changing from Windows to
+# update the Linux system password also.
+# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
+# NOTE2: You do NOT need these to allow workstations to change only
+#        the encrypted SMB passwords. They allow the Unix password
+#        to be kept in sync with the SMB password.
+;  unix password sync = Yes
+;  passwd program = /usr/bin/passwd %u
+;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
+
+# Unix users can map to different SMB User names
+;  username map = /etc/samba/smbusers
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting
+;   include = /etc/samba/smb.conf.%m
+
+# Most people will find that this option gives better performance.
+# See speed.txt and the manual pages for details
+   socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
+
+# Configure Samba to use multiple interfaces
+# If you have multiple network interfaces then you must list them
+# here. See the man page for details.
+;   interfaces = 192.168.12.2/24 192.168.13.2/24 
+
+# Configure remote browse list synchronisation here
+#  request announcement to, or browse list sync from:
+#	a specific host or from / to a whole subnet (see below)
+;   remote browse sync = 192.168.3.25 192.168.5.255
+# Cause this host to announce itself to local subnets here
+;   remote announce = 192.168.1.255 192.168.2.44
+
+# Browser Control Options:
+# set local master to no if you don't want Samba to become a master
+# browser on your network. Otherwise the normal election rules apply
+;   local master = no
+
+# OS Level determines the precedence of this server in master browser
+# elections. The default value should be reasonable
+;   os level = 33
+
+# Domain Master specifies Samba to be the Domain Master Browser. This
+# allows Samba to collate browse lists between subnets. Don't use this
+# if you already have a Windows NT domain controller doing this job
+;   domain master = yes 
+
+# Preferred Master causes Samba to force a local browser election on startup
+# and gives it a slightly higher chance of winning the election
+;   preferred master = yes
+
+# Enable this if you want Samba to be a domain logon server for 
+# Windows95 workstations. 
+;   domain logons = yes
+
+# if you enable domain logons then you may want a per-machine or
+# per user logon script
+# run a specific logon batch file per workstation (machine)
+;   logon script = %m.bat
+# run a specific logon batch file per username
+;   logon script = %U.bat
+
+# Where to store roving profiles (only for Win95 and WinNT)
+#        %L substitutes for this servers netbios name, %U is username
+#        You must uncomment the [Profiles] share below
+;   logon path = \\%L\Profiles\%U
+
+# All NetBIOS names must be resolved to IP Addresses
+# 'Name Resolve Order' allows the named resolution mechanism to be specified
+# the default order is "host lmhosts wins bcast". "host" means use the unix
+# system gethostbyname() function call that will use either /etc/hosts OR
+# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
+# and the /etc/resolv.conf file. "host" therefore is system configuration
+# dependant. This parameter is most often of use to prevent DNS lookups
+# in order to resolve NetBIOS names to IP Addresses. Use with care!
+# The example below excludes use of name resolution for machines that are NOT
+# on the local network segment
+# - OR - are not deliberately to be known via lmhosts or via WINS.
+; name resolve order = wins lmhosts bcast
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
+;   wins support = yes
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+;   wins server = w.x.y.z
+
+# WINS Proxy - Tells Samba to answer name resolution queries on
+# behalf of a non WINS capable client, for this to work there must be
+# at least one	WINS Server on the network. The default is NO.
+;   wins proxy = yes
+
+# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
+# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
+# this has been changed in version 1.9.18 to no.
+   dns proxy = no 
+
+# Case Preservation can be handy - system default is _no_
+# NOTE: These can be set on a per share basis
+;  preserve case = no
+;  short preserve case = no
+# Default case is normally upper case for all DOS files
+;  default case = lower
+# Be very careful with case sensitivity - it can break things!
+;  case sensitive = no
+
+#============================ Share Definitions ==============================
+[homes]
+   comment = Home Directories
+   browseable = no
+   writable = yes
+
+# Un-comment the following and create the netlogon directory for Domain Logons
+; [netlogon]
+;   comment = Network Logon Service
+;   path = /home/netlogon
+;   guest ok = yes
+;   writable = no
+;   share modes = no
+
+
+# Un-comment the following to provide a specific roving profile share
+# the default is to use the user's home directory
+;[Profiles]
+;    path = /home/profiles
+;    browseable = no
+;    guest ok = yes
+
+
+# NOTE: If you have a BSD-style print system there is no need to 
+# specifically define each individual printer
+[printers]
+   comment = All Printers
+   path = /var/spool/samba
+   browseable = no
+# Set public = yes to allow user 'guest account' to print
+   guest ok = no
+   writable = no
+   printable = yes
+
+# This one is useful for people to share files
+;[tmp]
+;   comment = Temporary file space
+;   path = /tmp
+;   read only = no
+;   public = yes
+
+# A publicly accessible directory, but read only, except for people in
+# the "staff" group
+;[public]
+;   comment = Public Stuff
+;   path = /home/samba
+;   public = yes
+;   read only = yes
+;   write list = @staff
+
+# Other examples. 
+#
+# A private printer, usable only by fred. Spool data will be placed in fred's
+# home directory. Note that fred must have write access to the spool directory,
+# wherever it is.
+;[fredsprn]
+;   comment = Fred's Printer
+;   valid users = fred
+;   path = /homes/fred
+;   printer = freds_printer
+;   public = no
+;   writable = no
+;   printable = yes
+
+# A private directory, usable only by fred. Note that fred requires write
+# access to the directory.
+;[fredsdir]
+;   comment = Fred's Service
+;   path = /usr/somewhere/private
+;   valid users = fred
+;   public = no
+;   writable = yes
+;   printable = no
+
+# a service which has a different directory for each machine that connects
+# this allows you to tailor configurations to incoming machines. You could
+# also use the %u option to tailor it by user name.
+# The %m gets replaced with the machine name that is connecting.
+;[pchome]
+;  comment = PC Directories
+;  path = /usr/pc/%m
+;  public = no
+;  writable = yes
+
+# A publicly accessible directory, read/write to all users. Note that all files
+# created in the directory by users will be owned by the default user, so
+# any user with access can delete any other user's files. Obviously this
+# directory must be writable by the default user. Another user could of course
+# be specified, in which case all files would be owned by that user instead.
+;[public]
+;   path = /usr/somewhere/else/public
+;   public = yes
+;   only guest = yes
+;   writable = yes
+;   printable = no
+
+# The following two entries demonstrate how to share a directory so that two
+# users can place files there that will be owned by the specific users. In this
+# setup, the directory should be writable by both users and should have the
+# sticky bit set on it to prevent abuse. Obviously this could be extended to
+# as many users as required.
+;[myshare]
+;   comment = Mary's and Fred's stuff
+;   path = /usr/somewhere/shared
+;   valid users = mary fred
+;   public = no
+;   writable = yes
+;   printable = no
+;   create mask = 0765
+
+