Move our basic password checking code from inside the authentication

subsystem into a seperate file - ntlm_check.c.

This allows us to call these routines from ntlm_auth.  The purpose of this
exercise is to allow ntlm_auth (when operating as an NTLMSSP server) to
avoid talking to winbind.  This should allow for easier debugging.

ntlm_auth itself has been reorgainised, so as to share more code between
the SPNEGO-wrapped and 'raw' NTLMSSP modes.  A new 'client' NTLMSSP mode
has been added, for use with a Cyrus-SASL module I am writing (based on vl's
work)

Andrew Bartlett
(This used to be commit 48315e8fd227978e0161be293ad4411b45e3ea5b)

1 files changed, 1 insertions, 345 deletions

diff --git a/source3/auth/auth_sam.c b/source3/auth/auth_sam.c
index 04b587343a..ebb1e3d861 100644
--- a/source3/auth/auth_sam.c
+++ b/source3/auth/auth_sam.c
@@ -3,7 +3,7 @@
    Password and authentication handling
    Copyright (C) Andrew Tridgell              1992-2000
    Copyright (C) Luke Kenneth Casson Leighton 1996-2000
-   Copyright (C) Andrew Bartlett              2001
+   Copyright (C) Andrew Bartlett              2001-2003
    Copyright (C) Gerald Carter                2003
    
    This program is free software; you can redistribute it and/or modify
@@ -27,350 +27,6 @@
 #define DBGC_CLASS DBGC_AUTH
 
 /****************************************************************************
- Core of smb password checking routine.
-****************************************************************************/
-
-static BOOL smb_pwd_check_ntlmv1(const DATA_BLOB *nt_response,
-				 const uchar *part_passwd,
-				 const DATA_BLOB *sec_blob,
-				 DATA_BLOB *user_sess_key)
-{
-	/* Finish the encryption of part_passwd. */
-	uchar p24[24];
-	
-	if (part_passwd == NULL) {
-		DEBUG(10,("No password set - DISALLOWING access\n"));
-		/* No password set - always false ! */
-		return False;
-	}
-	
-	if (sec_blob->length != 8) {
-		DEBUG(0, ("smb_pwd_check_ntlmv1: incorrect challenge size (%lu)\n", (unsigned long)sec_blob->length));
-		return False;
-	}
-	
-	if (nt_response->length != 24) {
-		DEBUG(0, ("smb_pwd_check_ntlmv1: incorrect password length (%lu)\n", (unsigned long)nt_response->length));
-		return False;
-	}
-
-	SMBOWFencrypt(part_passwd, sec_blob->data, p24);
-	if (user_sess_key != NULL) {
-		*user_sess_key = data_blob(NULL, 16);
-		SMBsesskeygen_ntv1(part_passwd, NULL, user_sess_key->data);
-	}
-	
-	
-	
-#if DEBUG_PASSWORD
-	DEBUG(100,("Part password (P16) was |\n"));
-	dump_data(100, part_passwd, 16);
-	DEBUGADD(100,("Password from client was |\n"));
-	dump_data(100, nt_response->data, nt_response->length);
-	DEBUGADD(100,("Given challenge was |\n"));
-	dump_data(100, sec_blob->data, sec_blob->length);
-	DEBUGADD(100,("Value from encryption was |\n"));
-	dump_data(100, p24, 24);
-#endif
-  return (memcmp(p24, nt_response->data, 24) == 0);
-}
-
-/****************************************************************************
- Core of smb password checking routine. (NTLMv2, LMv2)
- Note:  The same code works with both NTLMv2 and LMv2.
-****************************************************************************/
-
-static BOOL smb_pwd_check_ntlmv2(const DATA_BLOB *ntv2_response,
-				 const uchar *part_passwd,
-				 const DATA_BLOB *sec_blob,
-				 const char *user, const char *domain,
-				 DATA_BLOB *user_sess_key)
-{
-	/* Finish the encryption of part_passwd. */
-	uchar kr[16];
-	uchar value_from_encryption[16];
-	uchar client_response[16];
-	DATA_BLOB client_key_data;
-
-	if (part_passwd == NULL) {
-		DEBUG(10,("No password set - DISALLOWING access\n"));
-		/* No password set - always False */
-		return False;
-	}
-
-	if (ntv2_response->length < 24) {
-		/* We MUST have more than 16 bytes, or the stuff below will go
-		   crazy.  No known implementation sends less than the 24 bytes
-		   for LMv2, let alone NTLMv2. */
-		DEBUG(0, ("smb_pwd_check_ntlmv2: incorrect password length (%lu)\n", 
-			  (unsigned long)ntv2_response->length));
-		return False;
-	}
-
-	client_key_data = data_blob(ntv2_response->data+16, ntv2_response->length-16);
-	/* 
-	   todo:  should we be checking this for anything?  We can't for LMv2, 
-	   but for NTLMv2 it is meant to contain the current time etc.
-	*/
-
-	memcpy(client_response, ntv2_response->data, sizeof(client_response));
-
-	if (!ntv2_owf_gen(part_passwd, user, domain, kr)) {
-		return False;
-	}
-
-	SMBOWFencrypt_ntv2(kr, sec_blob, &client_key_data, value_from_encryption);
-	if (user_sess_key != NULL) {
-		*user_sess_key = data_blob(NULL, 16);
-		SMBsesskeygen_ntv2(kr, value_from_encryption, user_sess_key->data);
-	}
-
-#if DEBUG_PASSWORD
-	DEBUG(100,("Part password (P16) was |\n"));
-	dump_data(100, part_passwd, 16);
-	DEBUGADD(100,("Password from client was |\n"));
-	dump_data(100, ntv2_response->data, ntv2_response->length);
-	DEBUGADD(100,("Variable data from client was |\n"));
-	dump_data(100, client_key_data.data, client_key_data.length);
-	DEBUGADD(100,("Given challenge was |\n"));
-	dump_data(100, sec_blob->data, sec_blob->length);
-	DEBUGADD(100,("Value from encryption was |\n"));
-	dump_data(100, value_from_encryption, 16);
-#endif
-	data_blob_clear_free(&client_key_data);
-	return (memcmp(value_from_encryption, client_response, 16) == 0);
-}
-
-/**
- * Check a challenge-response password against the value of the NT or
- * LM password hash.
- *
- * @param mem_ctx talloc context
- * @param challenge 8-byte challenge.  If all zero, forces plaintext comparison
- * @param nt_response 'unicode' NT response to the challenge, or unicode password
- * @param lm_response ASCII or LANMAN response to the challenge, or password in DOS code page
- * @param username internal Samba username, for log messages
- * @param client_username username the client used
- * @param client_domain domain name the client used (may be mapped)
- * @param nt_pw MD4 unicode password from our passdb or similar
- * @param lm_pw LANMAN ASCII password from our passdb or similar
- * @param user_sess_key User session key
- * @param lm_sess_key LM session key (first 8 bytes of the LM hash)
- */
-
-static NTSTATUS ntlm_password_check(TALLOC_CTX *mem_ctx,
-				    const DATA_BLOB *challenge,
-				    const DATA_BLOB *lm_response,
-				    const DATA_BLOB *nt_response,
-				    const char *username, 
-				    const char *client_username, 
-				    const char *client_domain,
-				    const uint8 *lm_pw, const uint8 *nt_pw, 
-				    DATA_BLOB *user_sess_key, 
-				    DATA_BLOB *lm_sess_key)
-{
-	static const unsigned char zeros[8];
-	if (nt_pw == NULL) {
-		DEBUG(3,("sam_password_ok: NO NT password stored for user %s.\n", 
-			 username));
-	}
-
-	/* Check for cleartext netlogon. Used by Exchange 5.5. */
-	if (challenge->length == sizeof(zeros) && 
-	    (memcmp(challenge->data, zeros, challenge->length) == 0 )) {
-
-		DEBUG(4,("sam_password_ok: checking plaintext passwords for user %s\n",
-			 username));
-		if (nt_pw && nt_response->length) {
-			unsigned char pwhash[16];
-			mdfour(pwhash, nt_response->data, nt_response->length);
-			if (memcmp(pwhash, nt_pw, sizeof(pwhash)) == 0) {
-				return NT_STATUS_OK;
-			} else {
-				DEBUG(3,("sam_password_ok: NT (Unicode) plaintext password check failed for user %s\n",
-					 username));
-				return NT_STATUS_WRONG_PASSWORD;
-			}
-
-		} else if (!lp_lanman_auth()) {
-			DEBUG(3,("sam_password_ok: (plaintext password check) LANMAN passwords NOT PERMITTED for user %s\n",
-				 username));
-
-		} else if (lm_pw && lm_response->length) {
-			uchar dospwd[14]; 
-			uchar p16[16]; 
-			ZERO_STRUCT(dospwd);
-			
-			DEBUG(100, ("DOS password: %s\n"));
-			memcpy(dospwd, lm_response->data, MIN(lm_response->length, sizeof(dospwd)));
-			/* Only the fisrt 14 chars are considered, password need not be null terminated. */
-			E_P16((const unsigned char *)dospwd, p16);
-
-			dump_data_pw("DOS password (first buffer)\n", dospwd, 14);
-			dump_data_pw("DOS password (wire DES hash)\n", p16, 16);
-			dump_data_pw("DOS password (passdb DES hash)\n", lm_pw, 16);
-			if (memcmp(p16, lm_pw, sizeof(p16)) == 0) {
-				return NT_STATUS_OK;
-			} else {
-				DEBUG(3,("sam_password_ok: LANMAN (ASCII) plaintext password check failed for user %s\n",
-					 username));
-				return NT_STATUS_WRONG_PASSWORD;
-			}
-		} else {
-			DEBUG(3, ("Plaintext authentication for user %s attempted, but neither NT nor LM passwords available\n", username));
-			return NT_STATUS_WRONG_PASSWORD;
-		}
-	}
-
-	if (nt_response->length != 0 && nt_response->length < 24) {
-		DEBUG(2,("sam_password_ok: invalid NT password length (%lu) for user %s\n", 
-			 (unsigned long)nt_response->length, username));		
-	}
-	
-	if (nt_response->length >= 24 && nt_pw) {
-		if (nt_response->length > 24) {
-			/* We have the NT MD4 hash challenge available - see if we can
-			   use it (ie. does it exist in the smbpasswd file).
-			*/
-			DEBUG(4,("sam_password_ok: Checking NTLMv2 password with domain [%s]\n", client_domain));
-			if (smb_pwd_check_ntlmv2( nt_response, 
-						  nt_pw, challenge, 
-					  client_username, 
-						  client_domain,
-						  user_sess_key)) {
-				return NT_STATUS_OK;
-			}
-			
-			DEBUG(4,("sam_password_ok: Checking NTLMv2 password without a domain\n"));
-			if (smb_pwd_check_ntlmv2( nt_response, 
-						  nt_pw, challenge, 
-						  client_username, 
-						  "",
-						  user_sess_key)) {
-				return NT_STATUS_OK;
-			} else {
-				DEBUG(3,("sam_password_ok: NTLMv2 password check failed\n"));
-				return NT_STATUS_WRONG_PASSWORD;
-			}
-		}
-
-		if (lp_ntlm_auth()) {		
-			/* We have the NT MD4 hash challenge available - see if we can
-			   use it (ie. does it exist in the smbpasswd file).
-			*/
-			DEBUG(4,("sam_password_ok: Checking NT MD4 password\n"));
-			if (smb_pwd_check_ntlmv1(nt_response, 
-						 nt_pw, challenge,
-						 user_sess_key)) {
-				/* The LM session key for this response is not very secure, 
-				   so use it only if we otherwise allow LM authentication */
-
-				if (lp_lanman_auth() && lm_pw) {
-					uint8 first_8_lm_hash[16];
-					memcpy(first_8_lm_hash, lm_pw, 8);
-					memset(first_8_lm_hash + 8, '\0', 8);
-					*lm_sess_key = data_blob(first_8_lm_hash, 16);
-				}
-				return NT_STATUS_OK;
-			} else {
-				DEBUG(3,("sam_password_ok: NT MD4 password check failed for user %s\n",
-					 username));
-				return NT_STATUS_WRONG_PASSWORD;
-			}
-		} else {
-			DEBUG(2,("sam_password_ok: NTLMv1 passwords NOT PERMITTED for user %s\n",
-				 username));			
-			/* no return, becouse we might pick up LMv2 in the LM field */
-		}
-	}
-	
-	if (lm_response->length == 0) {
-		DEBUG(3,("sam_password_ok: NEITHER LanMan nor NT password supplied for user %s\n",
-			 username));
-		return NT_STATUS_WRONG_PASSWORD;
-	}
-	
-	if (lm_response->length < 24) {
-		DEBUG(2,("sam_password_ok: invalid LanMan password length (%lu) for user %s\n", 
-			 (unsigned long)nt_response->length, username));		
-		return NT_STATUS_WRONG_PASSWORD;
-	}
-		
-	if (!lp_lanman_auth()) {
-		DEBUG(3,("sam_password_ok: Lanman passwords NOT PERMITTED for user %s\n",
-			 username));
-	} else if (!lm_pw) {
-		DEBUG(3,("sam_password_ok: NO LanMan password set for user %s (and no NT password supplied)\n",
-			 username));
-	} else {
-		DEBUG(4,("sam_password_ok: Checking LM password\n"));
-		if (smb_pwd_check_ntlmv1(lm_response, 
-					 lm_pw, challenge,
-					 NULL)) {
-			uint8 first_8_lm_hash[16];
-			memcpy(first_8_lm_hash, lm_pw, 8);
-			memset(first_8_lm_hash + 8, '\0', 8);
-			*user_sess_key = data_blob(first_8_lm_hash, 16);
-			*lm_sess_key = data_blob(first_8_lm_hash, 16);
-			return NT_STATUS_OK;
-		}
-	}
-	
-	if (!nt_pw) {
-		DEBUG(4,("sam_password_ok: LM password check failed for user, no NT password %s\n",username));
-		return NT_STATUS_WRONG_PASSWORD;
-	}
-	
-	/* This is for 'LMv2' authentication.  almost NTLMv2 but limited to 24 bytes.
-	   - related to Win9X, legacy NAS pass-though authentication
-	*/
-	DEBUG(4,("sam_password_ok: Checking LMv2 password with domain %s\n", client_domain));
-	if (smb_pwd_check_ntlmv2( lm_response, 
-				  nt_pw, challenge, 
-				  client_username,
-				  client_domain,
-				  NULL)) {
-		return NT_STATUS_OK;
-	}
-	
-	DEBUG(4,("sam_password_ok: Checking LMv2 password without a domain\n"));
-	if (smb_pwd_check_ntlmv2( lm_response, 
-				  nt_pw, challenge, 
-				  client_username,
-				  "",
-				  NULL)) {
-		return NT_STATUS_OK;
-	}
-
-	/* Apparently NT accepts NT responses in the LM field
-	   - I think this is related to Win9X pass-though authentication
-	*/
-	DEBUG(4,("sam_password_ok: Checking NT MD4 password in LM field\n"));
-	if (lp_ntlm_auth()) {
-		if (smb_pwd_check_ntlmv1(lm_response, 
-					 nt_pw, challenge,
-					 NULL)) {
-			/* The session key for this response is still very odd.  
-			   It not very secure, so use it only if we otherwise 
-			   allow LM authentication */
-
-			if (lp_lanman_auth() && lm_pw) {
-				uint8 first_8_lm_hash[16];
-				memcpy(first_8_lm_hash, lm_pw, 8);
-				memset(first_8_lm_hash + 8, '\0', 8);
-				*user_sess_key = data_blob(first_8_lm_hash, 16);
-				*lm_sess_key = data_blob(first_8_lm_hash, 16);
-			}
-			return NT_STATUS_OK;
-		}
-		DEBUG(3,("sam_password_ok: LM password, NT MD4 password in LM field and LMv2 failed for user %s\n",username));
-	} else {
-		DEBUG(3,("sam_password_ok: LM password and LMv2 failed for user %s, and NT MD4 password in LM field not permitted\n",username));
-	}
-	return NT_STATUS_WRONG_PASSWORD;
-}
-
-/****************************************************************************
  Do a specific test for an smb password being correct, given a smb_password and
  the lanman and NT responses.
 ****************************************************************************/