s3: Remove unused cli_send/receive_nt_trans

1 files changed, 0 insertions, 341 deletions

diff --git a/source3/libsmb/clitrans.c b/source3/libsmb/clitrans.c
index 4379e1480a..bd3fe2d813 100644
--- a/source3/libsmb/clitrans.c
+++ b/source3/libsmb/clitrans.c
@@ -351,347 +351,6 @@ bool cli_receive_trans(struct cli_state *cli,int trans,
 	return ret;
 }
 
-/****************************************************************************
- Send a SMB nttrans request.
-****************************************************************************/
-
-bool cli_send_nt_trans(struct cli_state *cli,
-		       int function,
-		       int flags,
-		       uint16 *setup, unsigned int lsetup, unsigned int msetup,
-		       char *param, unsigned int lparam, unsigned int mparam,
-		       char *data, unsigned int ldata, unsigned int mdata)
-{
-	unsigned int i;
-	unsigned int this_ldata,this_lparam;
-	unsigned int tot_data=0,tot_param=0;
-	uint16 mid;
-	char *outdata,*outparam;
-
-	this_lparam = MIN(lparam,cli->max_xmit - (500+lsetup*2)); /* hack */
-	this_ldata = MIN(ldata,cli->max_xmit - (500+lsetup*2+this_lparam));
-
-	memset(cli->outbuf,'\0',smb_size);
-	cli_set_message(cli->outbuf,19+lsetup,0,True);
-	SCVAL(cli->outbuf,smb_com,SMBnttrans);
-	SSVAL(cli->outbuf,smb_tid, cli->cnum);
-	cli_setup_packet(cli);
-
-	/*
-	 * Save the mid we're using. We need this for finding
-	 * signing replies.
-	 */
-
-	mid = cli->mid;
-
-	outparam = smb_buf(cli->outbuf)+3;
-	outdata = outparam+this_lparam;
-
-	/* primary request */
-	SCVAL(cli->outbuf,smb_nt_MaxSetupCount,msetup);
-	SCVAL(cli->outbuf,smb_nt_Flags,flags);
-	SIVAL(cli->outbuf,smb_nt_TotalParameterCount, lparam);
-	SIVAL(cli->outbuf,smb_nt_TotalDataCount, ldata);
-	SIVAL(cli->outbuf,smb_nt_MaxParameterCount, mparam);
-	SIVAL(cli->outbuf,smb_nt_MaxDataCount, mdata);
-	SIVAL(cli->outbuf,smb_nt_ParameterCount, this_lparam);
-	SIVAL(cli->outbuf,smb_nt_ParameterOffset, smb_offset(outparam,cli->outbuf));
-	SIVAL(cli->outbuf,smb_nt_DataCount, this_ldata);
-	SIVAL(cli->outbuf,smb_nt_DataOffset, smb_offset(outdata,cli->outbuf));
-	SIVAL(cli->outbuf,smb_nt_SetupCount, lsetup);
-	SIVAL(cli->outbuf,smb_nt_Function, function);
-	for (i=0;i<lsetup;i++)		/* setup[] */
-		SSVAL(cli->outbuf,smb_nt_SetupStart+i*2,setup[i]);
-
-	if (this_lparam)			/* param[] */
-		memcpy(outparam,param,this_lparam);
-	if (this_ldata)			/* data[] */
-		memcpy(outdata,data,this_ldata);
-
-	cli_setup_bcc(cli, outdata+this_ldata);
-
-	show_msg(cli->outbuf);
-	if (!cli_send_smb(cli)) {
-		return False;
-	}
-
-	cli_state_seqnum_persistent(cli, mid);
-
-	if (this_ldata < ldata || this_lparam < lparam) {
-		/* receive interim response */
-		if (!cli_receive_smb(cli) || cli_is_error(cli)) {
-			cli_state_seqnum_remove(cli, mid);
-			return(False);
-		}
-
-		tot_data = this_ldata;
-		tot_param = this_lparam;
-
-		while (tot_data < ldata || tot_param < lparam)  {
-			this_lparam = MIN(lparam-tot_param,cli->max_xmit - 500); /* hack */
-			this_ldata = MIN(ldata-tot_data,cli->max_xmit - (500+this_lparam));
-
-			cli_set_message(cli->outbuf,18,0,True);
-			SCVAL(cli->outbuf,smb_com,SMBnttranss);
-
-			/* XXX - these should probably be aligned */
-			outparam = smb_buf(cli->outbuf);
-			outdata = outparam+this_lparam;
-
-			/* secondary request */
-			SIVAL(cli->outbuf,smb_nts_TotalParameterCount,lparam);
-			SIVAL(cli->outbuf,smb_nts_TotalDataCount,ldata);
-			SIVAL(cli->outbuf,smb_nts_ParameterCount,this_lparam);
-			SIVAL(cli->outbuf,smb_nts_ParameterOffset,smb_offset(outparam,cli->outbuf));
-			SIVAL(cli->outbuf,smb_nts_ParameterDisplacement,tot_param);
-			SIVAL(cli->outbuf,smb_nts_DataCount,this_ldata);
-			SIVAL(cli->outbuf,smb_nts_DataOffset,smb_offset(outdata,cli->outbuf));
-			SIVAL(cli->outbuf,smb_nts_DataDisplacement,tot_data);
-			if (this_lparam)			/* param[] */
-				memcpy(outparam,param+tot_param,this_lparam);
-			if (this_ldata)			/* data[] */
-				memcpy(outdata,data+tot_data,this_ldata);
-			cli_setup_bcc(cli, outdata+this_ldata);
-
-			show_msg(cli->outbuf);
-
-			cli->mid = mid;
-			if (!cli_send_smb(cli)) {
-				cli_state_seqnum_remove(cli, mid);
-				return False;
-			}
-
-			tot_data += this_ldata;
-			tot_param += this_lparam;
-		}
-	}
-
-	return(True);
-}
-
-/****************************************************************************
- Receive a SMB nttrans response allocating the necessary memory.
-****************************************************************************/
-
-bool cli_receive_nt_trans(struct cli_state *cli,
-			  char **param, unsigned int *param_len,
-			  char **data, unsigned int *data_len)
-{
-	unsigned int total_data=0;
-	unsigned int total_param=0;
-	unsigned int this_data,this_param;
-	uint8 eclass;
-	uint32 ecode;
-	bool ret = False;
-	uint16_t mid;
-
-	*data_len = *param_len = 0;
-
-	mid = SVAL(cli->outbuf,smb_mid);
-
-	if (!cli_receive_smb(cli)) {
-		cli_state_seqnum_remove(cli, mid);
-		return False;
-	}
-
-	show_msg(cli->inbuf);
-
-	/* sanity check */
-	if (CVAL(cli->inbuf,smb_com) != SMBnttrans) {
-		DEBUG(0,("Expected SMBnttrans response, got command 0x%02x\n",
-			 CVAL(cli->inbuf,smb_com)));
-		cli_state_seqnum_remove(cli, mid);
-		return(False);
-	}
-
-	/*
-	 * An NT RPC pipe call can return ERRDOS, ERRmoredata
-	 * to a trans call. This is not an error and should not
-	 * be treated as such.
-	 */
-	if (cli_is_dos_error(cli)) {
-                cli_dos_error(cli, &eclass, &ecode);
-		if (!(eclass == ERRDOS && ecode == ERRmoredata)) {
-			goto out;
-		}
-	}
-
-	/*
-	 * Likewise for NT_STATUS_BUFFER_TOO_SMALL
-	 */
-	if (cli_is_nt_error(cli)) {
-		if (!NT_STATUS_EQUAL(cli_nt_error(cli),
-				     NT_STATUS_BUFFER_TOO_SMALL)) {
-			goto out;
-		}
-	}
-
-	/* parse out the lengths */
-	total_data = IVAL(cli->inbuf,smb_ntr_TotalDataCount);
-	total_param = IVAL(cli->inbuf,smb_ntr_TotalParameterCount);
-	/* Only allow 16 megs. */
-	if (total_param > 16*1024*1024) {
-		DEBUG(0,("cli_receive_nt_trans: param buffer too large %d\n",
-					total_param));
-		goto out;
-	}
-	if (total_data > 16*1024*1024) {
-		DEBUG(0,("cli_receive_nt_trans: data buffer too large %d\n",
-					total_data));
-		goto out;
-	}
-
-	/* allocate it */
-	if (total_data) {
-		/* We know adding 2 is safe as total_data is less
-		 * than 16mb (above). */
-		*data = (char *)SMB_REALLOC(*data,total_data+2);
-		if (!(*data)) {
-			DEBUG(0,("cli_receive_nt_trans: failed to enlarge data buffer to %d\n",total_data));
-			goto out;
-		}
-	}
-
-	if (total_param) {
-		/* We know adding 2 is safe as total_param is less
-		 * than 16mb (above). */
-		*param = (char *)SMB_REALLOC(*param,total_param+2);
-		if (!(*param)) {
-			DEBUG(0,("cli_receive_nt_trans: failed to enlarge param buffer to %d\n", total_param));
-			goto out;
-		}
-	}
-
-	while (1)  {
-		this_data = SVAL(cli->inbuf,smb_ntr_DataCount);
-		this_param = SVAL(cli->inbuf,smb_ntr_ParameterCount);
-
-		if (this_data + *data_len > total_data ||
-		    this_param + *param_len > total_param) {
-			DEBUG(1,("Data overflow in cli_receive_nt_trans\n"));
-			goto out;
-		}
-
-		if (this_data + *data_len < this_data ||
-				this_data + *data_len < *data_len ||
-				this_param + *param_len < this_param ||
-				this_param + *param_len < *param_len) {
-			DEBUG(1,("Data overflow in cli_receive_nt_trans\n"));
-			goto out;
-		}
-
-		if (this_data) {
-			unsigned int data_offset_out = SVAL(cli->inbuf,smb_ntr_DataDisplacement);
-			unsigned int data_offset_in = SVAL(cli->inbuf,smb_ntr_DataOffset);
-
-			if (data_offset_out > total_data ||
-					data_offset_out + this_data > total_data ||
-					data_offset_out + this_data < data_offset_out ||
-					data_offset_out + this_data < this_data) {
-				DEBUG(1,("Data overflow in cli_receive_nt_trans\n"));
-				goto out;
-			}
-			if (data_offset_in > cli->bufsize ||
-					data_offset_in + this_data >  cli->bufsize ||
-					data_offset_in + this_data < data_offset_in ||
-					data_offset_in + this_data < this_data) {
-				DEBUG(1,("Data overflow in cli_receive_nt_trans\n"));
-				goto out;
-			}
-
-			memcpy(*data + data_offset_out, smb_base(cli->inbuf) + data_offset_in, this_data);
-		}
-
-		if (this_param) {
-			unsigned int param_offset_out = SVAL(cli->inbuf,smb_ntr_ParameterDisplacement);
-			unsigned int param_offset_in = SVAL(cli->inbuf,smb_ntr_ParameterOffset);
-
-			if (param_offset_out > total_param ||
-					param_offset_out + this_param > total_param ||
-					param_offset_out + this_param < param_offset_out ||
-					param_offset_out + this_param < this_param) {
-				DEBUG(1,("Param overflow in cli_receive_nt_trans\n"));
-				goto out;
-			}
-			if (param_offset_in > cli->bufsize ||
-					param_offset_in + this_param >  cli->bufsize ||
-					param_offset_in + this_param < param_offset_in ||
-					param_offset_in + this_param < this_param) {
-				DEBUG(1,("Param overflow in cli_receive_nt_trans\n"));
-				goto out;
-			}
-
-			memcpy(*param + param_offset_out, smb_base(cli->inbuf) + param_offset_in, this_param);
-		}
-
-		*data_len += this_data;
-		*param_len += this_param;
-
-		if (total_data <= *data_len && total_param <= *param_len) {
-			ret = True;
-			break;
-		}
-
-		if (!cli_receive_smb(cli)) {
-			goto out;
-		}
-
-		show_msg(cli->inbuf);
-
-		/* sanity check */
-		if (CVAL(cli->inbuf,smb_com) != SMBnttrans) {
-			DEBUG(0,("Expected SMBnttrans response, got command 0x%02x\n",
-				 CVAL(cli->inbuf,smb_com)));
-			goto out;
-		}
-		if (cli_is_dos_error(cli)) {
-                        cli_dos_error(cli, &eclass, &ecode);
-			if(!(eclass == ERRDOS && ecode == ERRmoredata)) {
-				goto out;
-			}
-		}
-		/*
-		 * Likewise for NT_STATUS_BUFFER_TOO_SMALL
-		 */
-		if (cli_is_nt_error(cli)) {
-			if (!NT_STATUS_EQUAL(cli_nt_error(cli),
-					     NT_STATUS_BUFFER_TOO_SMALL)) {
-				goto out;
-			}
-		}
-
-		/* parse out the total lengths again - they can shrink! */
-		if (IVAL(cli->inbuf,smb_ntr_TotalDataCount) < total_data)
-			total_data = IVAL(cli->inbuf,smb_ntr_TotalDataCount);
-		if (IVAL(cli->inbuf,smb_ntr_TotalParameterCount) < total_param)
-			total_param = IVAL(cli->inbuf,smb_ntr_TotalParameterCount);
-
-		if (total_data <= *data_len && total_param <= *param_len) {
-			ret = True;
-			break;
-		}
-	}
-
-  out:
-
-	cli_state_seqnum_remove(cli, mid);
-
-	if (ret) {
-		/* Ensure the last 2 bytes of param and data are 2 null
-		 * bytes. These are malloc'ed, but not included in any
-		 * length counts. This allows cli_XX string reading functions
-		 * to safely null terminate. */
-		if (total_data) {
-			SSVAL(*data,total_data,0);
-		}
-		if (total_param) {
-			SSVAL(*param,total_param,0);
-		}
-	}
-
-	return ret;
-}
-
 struct trans_recvblob {
 	uint8_t *data;
 	uint32_t max, total, received;