r5014: Split out the request to send an async level II oplock break into a

new function to make it clear when it's called. Remove async parameter
that had been overloaded into request_oplock_break.
Inspired by work from Nadav Danieli <nadavd@exanet.com>.
Jeremy.
(This used to be commit 05697fb50236dfc28e81f8b3900eac17cace57c1)

1 files changed, 58 insertions, 17 deletions

diff --git a/source3/smbd/oplock.c b/source3/smbd/oplock.c
index 8d1b6911e7..a55d5443d5 100644
--- a/source3/smbd/oplock.c
+++ b/source3/smbd/oplock.c
@@ -944,12 +944,12 @@ static BOOL oplock_break(SMB_DEV_T dev, SMB_INO_T inode, unsigned long file_id,
 }
 
 /****************************************************************************
-Send an oplock break message to another smbd process. If the oplock is held 
-by the local smbd then call the oplock break function directly.
-Note this function is always called with the share mode lock *NOT* held.
+ Send an oplock break message to another smbd process. If the oplock is held 
+ by the local smbd then call the oplock break function directly.
+ This function is called with no share locks held.
 ****************************************************************************/
 
-BOOL request_oplock_break(share_mode_entry *share_entry, BOOL async)
+BOOL request_oplock_break(share_mode_entry *share_entry)
 {
 	char op_break_msg[OPLOCK_BREAK_MSG_LEN];
 	struct sockaddr_in addr_out;
@@ -990,7 +990,7 @@ dev = %x, inode = %.0f, file_id = %lu and no fsp found !\n",
 	/* We need to send a OPLOCK_BREAK_CMD message to the port in the share mode entry. */
 
 	if (LEVEL_II_OPLOCK_TYPE(share_entry->op_type)) {
-		break_cmd_type = async ? ASYNC_LEVEL_II_OPLOCK_BREAK_CMD : LEVEL_II_OPLOCK_BREAK_CMD;
+		break_cmd_type = LEVEL_II_OPLOCK_BREAK_CMD;
 	} else {
 		break_cmd_type = OPLOCK_BREAK_CMD;
 	}
@@ -1008,7 +1008,7 @@ dev = %x, inode = %.0f, file_id = %lu and no fsp found !\n",
 	addr_out.sin_family = AF_INET;
    
 	if( DEBUGLVL( 3 ) ) {
-		dbgtext( "request_oplock_break: sending a %s oplock break message to ", async ? "asynchronous" : "synchronous" );
+		dbgtext( "request_oplock_break: sending a synchronous oplock break message to " );
 		dbgtext( "pid %d on port %d ", (int)share_entry->pid, share_entry->op_port );
 		dbgtext( "for dev = %x, inode = %.0f, file_id = %lu\n",
             (unsigned int)dev, (double)inode, file_id );
@@ -1028,16 +1028,6 @@ dev = %x, inode = %.0f, file_id = %lu and no fsp found !\n",
 	}
 
 	/*
-	 * If we just sent a message to a level II oplock share entry in async mode then
-	 * we are done and may return.
-	 */
-
-	if (LEVEL_II_OPLOCK_TYPE(share_entry->op_type) && async) {
-		DEBUG(3,("request_oplock_break: sent async break message to level II entry.\n"));
-		return True;
-	}
-
-	/*
 	 * Now we must await the oplock broken message coming back
 	 * from the target smbd process. Timeout if it fails to
 	 * return in (OPLOCK_BREAK_TIMEOUT + OPLOCK_BREAK_TIMEOUT_FUDGEFACTOR) seconds.
@@ -1150,6 +1140,57 @@ BOOL attempt_close_oplocked_file(files_struct *fsp)
 }
 
 /****************************************************************************
+ Send an asynchronous oplock break message to another smbd process.
+****************************************************************************/
+
+static BOOL request_remote_level2_async_oplock_break(share_mode_entry *share_entry)
+{
+	char op_break_msg[OPLOCK_BREAK_MSG_LEN];
+	struct sockaddr_in addr_out;
+	pid_t pid = sys_getpid();
+	SMB_DEV_T dev = share_entry->dev;
+	SMB_INO_T inode = share_entry->inode;
+	unsigned long file_id = share_entry->share_file_id;
+
+	/* We need to send a ASYNC_LEVEL_II_OPLOCK_BREAK_CMD message to the port in the share mode entry. */
+
+	SSVAL(op_break_msg,OPBRK_MESSAGE_CMD_OFFSET,ASYNC_LEVEL_II_OPLOCK_BREAK_CMD);
+	memcpy(op_break_msg+OPLOCK_BREAK_PID_OFFSET,(char *)&pid,sizeof(pid));
+	memcpy(op_break_msg+OPLOCK_BREAK_DEV_OFFSET,(char *)&dev,sizeof(dev));
+	memcpy(op_break_msg+OPLOCK_BREAK_INODE_OFFSET,(char *)&inode,sizeof(inode));
+	memcpy(op_break_msg+OPLOCK_BREAK_FILEID_OFFSET,(char *)&file_id,sizeof(file_id));
+
+	/* Set the address and port. */
+	memset((char *)&addr_out,'\0',sizeof(addr_out));
+	addr_out.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+	addr_out.sin_port = htons( share_entry->op_port );
+	addr_out.sin_family = AF_INET;
+   
+	if( DEBUGLVL( 3 ) ) {
+		dbgtext( "request_remote_level2_async_oplock_break: sending an asynchronous oplock break message to ");
+		dbgtext( "pid %d on port %d ", (int)share_entry->pid, share_entry->op_port );
+		dbgtext( "for dev = %x, inode = %.0f, file_id = %lu\n",
+            (unsigned int)dev, (double)inode, file_id );
+	}
+
+	if(sys_sendto(oplock_sock,op_break_msg,OPLOCK_BREAK_MSG_LEN,0,
+			(struct sockaddr *)&addr_out,sizeof(addr_out)) < 0) {
+		if( DEBUGLVL( 0 ) ) {
+			dbgtext( "request_remote_level2_async_oplock_break: failed when sending a oplock " );
+			dbgtext( "break message to pid %d ", (int)share_entry->pid );
+			dbgtext( "on port %d ", share_entry->op_port );
+			dbgtext( "for dev = %x, inode = %.0f, file_id = %lu\n",
+				(unsigned int)dev, (double)inode, file_id );
+			dbgtext( "Error was %s\n", strerror(errno) );
+		}
+		return False;
+	}
+
+	DEBUG(3,("request_remote_level2_async_oplock_break: sent async break message to level II entry.\n"));
+	return True;
+}
+
+/****************************************************************************
  This function is called on any file modification or lock request. If a file
  is level 2 oplocked then it must tell all other level 2 holders to break to none.
 ****************************************************************************/
@@ -1234,7 +1275,7 @@ void release_level_2_oplocks_on_change(files_struct *fsp)
 			 */
 
 			DEBUG(10,("release_level_2_oplocks_on_change: breaking remote oplock (async).\n"));
-			request_oplock_break(share_entry, True);
+			request_remote_level2_async_oplock_break(share_entry);
 		}
 	}