s3:configure: use the same dynconfig options and default values as the toplevel build

metze

2 files changed, 77 insertions, 368 deletions

diff --git a/source3/Makefile.in b/source3/Makefile.in
index 146c9cb2f2..0a72cf579a 100644
--- a/source3/Makefile.in
+++ b/source3/Makefile.in
@@ -16,6 +16,42 @@ sysconfdir=@sysconfdir@
 localstatedir=@localstatedir@
 datarootdir=@datarootdir@
 
+# the following vars come from ../dynconfig/config.m4
+BINDIR=@BINDIR@
+SBINDIR=@SBINDIR@
+LIBDIR=@LIBDIR@
+#LIBEXECDIR=@LIBEXECDIR@
+MANDIR=@MANDIR@
+DATADIR=@DATADIR@
+LOCALEDIR=@LOCALEDIR@
+#SCRIPTSBINDIR=@SCRIPTSBINDIR@
+#PYTHONDIR=@PYTHONDIR@
+#PYTHONARCHDIR=@PYTHONARCHDIR@
+MODULESDIR=@MODULESDIR@
+INCLUDEDIR=@INCLUDEDIR@
+SETUPDIR=@SETUPDIR@
+#PKGCONFIGDIR=@PKGCONFIGDIR@
+SWATDIR=@SWATDIR@
+CODEPAGEDIR=@CODEPAGEDIR@
+PAMMODULESDIR=@PAMMODULESDIR@
+CONFIGDIR=@CONFIGDIR@
+PRIVATE_DIR=@PRIVATE_DIR@
+LOCKDIR=@LOCKDIR@
+PIDDIR=@PIDDIR@
+STATEDIR=@STATEDIR@
+CACHEDIR=@CACHEDIR@
+LOGFILEBASE=@LOGFILEBASE@
+SOCKET_DIR=@SOCKET_DIR@
+PRIVILEGED_SOCKET_DIR=@PRIVILEGED_SOCKET_DIR@
+#WINBINDD_SOCKET_DIR=@WINBINDD_SOCKET_DIR@
+#WINBINDD_PRIVILEGED_SOCKET_DIR=@WINBINDD_PRIVILEGED_SOCKET_DIR@
+NMBDSOCKETDIR=@NMBDSOCKETDIR@
+#NTP_SIGND_SOCKET_DIR=@NTP_SIGND_SOCKET_DIR@
+NCALRPCDIR=@NCALRPCDIR@
+CONFIGFILE=@CONFIGFILE@
+LMHOSTSFILE=@LMHOSTSFILE@
+SMB_PASSWD_FILE=@SMB_PASSWD_FILE@
+
 selftest_prefix=@selftest_prefix@
 selftest_shrdir=@selftest_shrdir@
 smbtorture4_path=@smbtorture4_path@
@@ -117,14 +153,6 @@ DESTDIR=/
 # See the autoconf manual "Installation Directory Variables" for a
 # discussion of the subtle use of these variables.
 
-BASEDIR= @prefix@
-BINDIR = @bindir@
-# sbindir is mapped to bindir when compiling SAMBA in 2.0.x compatibility mode.
-SBINDIR = @sbindir@
-LIBDIR = @libdir@
-MODULESDIR = @modulesdir@
-INCLUDEDIR=@includedir@
-PAMMODULESDIR = @pammodulesdir@
 VFSLIBDIR = $(MODULESDIR)/vfs
 PERFCOUNTLIBDIR = $(MODULESDIR)/perfcount
 PDBLIBDIR = $(MODULESDIR)/pdb
@@ -135,52 +163,12 @@ CHARSETLIBDIR = $(MODULESDIR)/charset
 AUTHLIBDIR = $(MODULESDIR)/auth
 CONFIGLIBDIR = $(MODULESDIR)/config
 GPEXTLIBDIR = $(MODULESDIR)/gpext
-CONFIGDIR = @configdir@
 VARDIR = @localstatedir@
-MANDIR = @mandir@
-DATADIR = @datadir@
-SETUPDIR = @datadir@/setup
 
 # The permissions to give the executables and other data
 INSTALLPERMS_BIN = 0755
 INSTALLPERMS_DATA = 0644
 
-# set these to where to find various files
-# These can be overridden by command line switches (see smbd(8))
-# or in smb.conf (see smb.conf(5))
-LOGFILEBASE = @logfilebase@
-CONFIGFILE = $(CONFIGDIR)/smb.conf
-LMHOSTSFILE = $(CONFIGDIR)/lmhosts
-NCALRPCDIR = @ncalrpcdir@
-
-# This is where smbpasswd et al go
-PRIVATEDIR = @privatedir@
-
-SMB_PASSWD_FILE = $(PRIVATEDIR)/smbpasswd
-PRIVATE_DIR = $(PRIVATEDIR)
-
-# This is where SWAT images and help files go
-SWATDIR = @swatdir@
-
-# This is where locale(mo) files go
-LOCALEDIR= @localedir@
-
-# the directory where lock files go
-LOCKDIR = @lockdir@
-
-# FHS directories; equal to LOCKDIR if not using --with-fhs, but also settable
-CACHEDIR = @cachedir@
-STATEDIR = @statedir@
-
-# Where to look for (and install) codepage databases.
-CODEPAGEDIR = @codepagedir@
-
-# the directory where pid files go
-PIDDIR = @piddir@
-
-# the directory where nmbd listens on the unexpected socket
-NMBDSOCKETDIR = @nmbdsocketdir@
-
 FLAGS = -I. \
 	-I$(srcdir) \
 	@FLAGS1@ \
@@ -3256,7 +3244,7 @@ install-everything:: install installmodules
 installdirs::
 	@$(SHELL) $(srcdir)/script/installdirs.sh $(INSTALLPERMS_BIN) \
 		$(DESTDIR) $(prefix) $(BINDIR) $(SBINDIR) $(LIBDIR) \
-		$(VARDIR) $(PRIVATEDIR) $(PIDDIR) $(LOCKDIR) $(STATEDIR) \
+		$(VARDIR) $(PRIVATE_DIR) $(PIDDIR) $(LOCKDIR) $(STATEDIR) \
 		$(NMBDSOCKETDIR) \
 		$(CACHEDIR) $(MANDIR) $(CODEPAGEDIR) $(MODULESDIR) $(LOCALEDIR)
 
@@ -3323,23 +3311,45 @@ installmo:: all installdirs
 
 showlayout::
 	@echo "Samba will be installed into:"
-	@echo "  prefix:      $(prefix)"
-	@echo "  bindir:      $(BINDIR)"
-	@echo "  sbindir:     $(SBINDIR)"
-	@echo "  libdir:      $(LIBDIR)"
-	@echo "  modulesdir:  $(MODULESDIR)"
-	@echo "  vardir:      $(VARDIR)"
-	@echo "  mandir:      $(MANDIR)"
-	@echo "  privatedir:  $(PRIVATE_DIR)"
-	@echo "  configdir:   $(CONFIGDIR)"
-	@echo "  lockdir:     $(LOCKDIR)"
-	@echo "  statedir:    $(STATEDIR)"
-	@echo "  cachedir:    $(CACHEDIR)"
-	@echo "  piddir:      $(PIDDIR)"
-	@echo "  nmbdsocketdir: $(NMBSOCKETDIR)"
-	@echo "  swatdir:     $(SWATDIR)"
-	@echo "  datadir:     ${DATADIR}"
-	@echo "  codepagedir: $(CODEPAGEDIR)"
+	@echo " prefix:                $(prefix)"
+	@echo " exec_prefix:           $(exec_prefix)"
+	@echo " sysconfdir:            $(sysconfdir)"
+	@echo " localstatedir:         $(localstatedir)"
+	@echo " datarootdir:           $(datarootdir)"
+	@echo " BINDIR:                $(BINDIR)"
+	@echo " SBINDIR:               $(SBINDIR)"
+	@echo " LIBDIR:                $(LIBDIR)"
+#	@echo " LIBEXECDIR:            $(LIBEXECDIR)"
+	@echo " MANDIR:                $(MANDIR)"
+	@echo " DATADIR:               $(DATADIR)"
+	@echo " LOCALEDIR:             $(LOCALEDIR)"
+#	@echo " SCRIPTSBINDIR:         $(SCRIPTSBINDIR)"
+#	@echo " PYTHONDIR:             $(PYTHONDIR)"
+#	@echo " PYTHONARCHDIR:         $(PYTHONARCHDIR)"
+	@echo " MODULESDIR:            $(MODULESDIR)"
+	@echo " INCLUDEDIR:            $(INCLUDEDIR)"
+	@echo " SETUPDIR:              $(SETUPDIR)"
+#	@echo " PKGCONFIGDIR:          $(PKGCONFIGDIR)"
+	@echo " SWATDIR:               $(SWATDIR)"
+	@echo " CODEPAGEDIR:           $(CODEPAGEDIR)"
+	@echo " PAMMODULESDIR:         $(PAMMODULESDIR)"
+	@echo " CONFIGDIR:             $(CONFIGDIR)"
+	@echo " PRIVATE_DIR:           $(PRIVATE_DIR)"
+	@echo " LOCKDIR:               $(LOCKDIR)"
+	@echo " PIDDIR:                $(PIDDIR)"
+	@echo " STATEDIR:              $(STATEDIR)"
+	@echo " CACHEDIR:              $(CACHEDIR)"
+	@echo " LOGFILEBASE:           $(LOGFILEBASE)"
+	@echo " SOCKET_DIR:            $(SOCKET_DIR)"
+	@echo " PRIVILEGED_SOCKET_DIR: $(PRIVILEGED_SOCKET_DIR)"
+#	@echo " WINBINDD_SOCKET_DIR:   $(WINBINDD_SOCKET_DIR)"
+#	@echo " WINBINDD_PRIVILEGED_SOCKET_DIR: $(WINBINDD_PRIVILEGED_SOCKET_DIR)"
+	@echo " NMBDSOCKETDIR:         $(NMBDSOCKETDIR)"
+#	@echo " NTP_SIGND_SOCKET_DIR:  $(NTP_SIGND_SOCKET_DIR)"
+	@echo " NCALRPCDIR:            $(NCALRPCDIR)"
+	@echo " CONFIGFILE:            $(CONFIGFILE)"
+	@echo " LMHOSTSFILE:           $(LMHOSTSFILE)"
+	@echo " SMB_PASSWD_FILE:       $(SMB_PASSWD_FILE)"
 
 
 uninstall:: uninstallmo uninstallman uninstallservers uninstallbin uninstallscripts uninstalldat uninstallswat uninstallmodules uninstalllibs @UNINSTALL_PAM_MODULES@
diff --git a/source3/m4/check_path.m4 b/source3/m4/check_path.m4
index 1d65846e70..be31782f2b 100644
--- a/source3/m4/check_path.m4
+++ b/source3/m4/check_path.m4
@@ -9,308 +9,7 @@ dnl
 
 AC_LIBREPLACE_LOCATION_CHECKS
 
-#################################################
-# Directory handling stuff to support both the
-# legacy SAMBA directories and FHS compliant
-# ones...
-AC_PREFIX_DEFAULT(/usr/local/samba)
-
-lockdir="\${VARDIR}/locks"
-piddir="\${VARDIR}/locks"
-ncalrpcdir="\${VARDIR}/ncalrpc"
-nmbdsocketdir="\${VARDIR}/nmbd"
-test "${mandir}" || mandir="\${prefix}/man"
-logfilebase="\${VARDIR}"
-privatedir="\${prefix}/private"
-test "${libdir}" || libdir="\${prefix}/lib"
-modulesdir="${libdir}"
-pammodulesdir="${libdir}/security"
-configdir="${libdir}"
-swatdir="\${prefix}/swat"
-codepagedir="\${MODULESDIR}"
-statedir="\${LOCKDIR}"
-cachedir="\${LOCKDIR}"
-localedir="\${prefix}/share/locale"
-
-AC_ARG_WITH(fhs,
-[AS_HELP_STRING([--with-fhs],[Use FHS-compliant paths (default=no)])],
-[ case "$withval" in
-  yes)
-    lockdir="\${VARDIR}/lib/samba"
-    piddir="\${VARDIR}/run"
-    mandir="\${prefix}/share/man"
-    logfilebase="\${VARDIR}/log/samba"
-    privatedir="\${CONFIGDIR}/private"
-    test "${libdir}" || libdir="\${prefix}/lib"
-    modulesdir="${libdir}/samba"
-    configdir="\${sysconfdir}/samba"
-    swatdir="\${DATADIR}/samba/swat"
-    codepagedir="\${MODULESDIR}"
-    statedir="\${VARDIR}/lib/samba"
-    cachedir="\${VARDIR}/lib/samba"
-    ncalrpcdir="\${VARDIR}/ncalrpc"
-    AC_DEFINE(FHS_COMPATIBLE, 1, [Whether to use fully FHS-compatible paths])
-    ;;
-  esac])
-
-#################################################
-# set private directory location
-AC_ARG_WITH(privatedir,
-[AS_HELP_STRING([--with-privatedir=DIR], [Where to put smbpasswd ($ac_default_prefix/private)])],
-[ case "$withval" in
-  yes|no)
-  #
-  # Just in case anybody calls it without argument
-  #
-    AC_MSG_WARN([--with-privatedir called without argument - will use default])
-  ;;
-  * )
-    privatedir="$withval"
-    ;;
-  esac])
-
-#################################################
-# set lock directory location
-AC_ARG_WITH(lockdir,
-[AS_HELP_STRING([--with-lockdir=DIR], [Where to put lock files ($ac_default_prefix/var/locks)])],
-[ case "$withval" in
-  yes|no)
-  #
-  # Just in case anybody calls it without argument
-  #
-    AC_MSG_WARN([--with-lockdir called without argument - will use default])
-  ;;
-  * )
-    lockdir="$withval"
-    ;;
-  esac])
-
-#################################################
-# set state directory location
-AC_ARG_WITH(statedir,
-[AS_HELP_STRING([--with-statedir=DIR], [Where to put persistent state files ($ac_default_prefix/var/locks)])],
-[ case "$withval" in
-  yes|no)
-  #
-  # Just in case anybody calls it without argument
-  #
-    AC_MSG_WARN([--with-statedir called without argument - will use default])
-  ;;
-  * )
-    statedir="$withval"
-    ;;
-  esac])
-
-#################################################
-# set cache directory location
-AC_ARG_WITH(cachedir,
-[AS_HELP_STRING([--with-cachedir=DIR], [Where to put temporary cache files ($ac_default_prefix/var/locks)])],
-[ case "$withval" in
-  yes|no)
-  #
-  # Just in case anybody calls it without argument
-  #
-    AC_MSG_WARN([--with-cachedir called without argument - will use default])
-  ;;
-  * )
-    cachedir="$withval"
-    ;;
-  esac])
-
-#################################################
-# set pid directory location
-AC_ARG_WITH(piddir,
-[AS_HELP_STRING([--with-piddir=DIR], [Where to put pid files ($ac_default_prefix/var/locks)])],
-[ case "$withval" in
-  yes|no)
-  #
-  # Just in case anybody calls it without argument
-  #
-    AC_MSG_WARN([--with-piddir called without argument - will use default])
-  ;;
-  * )
-    piddir="$withval"
-    ;;
-  esac])
-
-#################################################
-# set ncalrpc directory location
-AC_ARG_WITH(ncalrpcdir,
-[AS_HELP_STRING([--with-ncalrpcdir=DIR], [Where to put ncalrpc sockets ($ac_default_prefix/var/ncalrpc)])],
-[ case "$withval" in
-  yes|no)
-  #
-  # Just in case anybody calls it without argument
-  #
-    AC_MSG_WARN([--with-ncalrpcdir called without argument - will use default])
-  ;;
-  * )
-    ncalrpcdir="$withval"
-    ;;
-  esac])
-
-#################################################
-# set nmbd socket directory location
-AC_ARG_WITH(nmbdsocketdir,
-[AS_HELP_STRING([--with-nmbdsocketdir=DIR], [Where to put the nmbd socket directory ($ac_default_prefix/var/nmbd)])],
-[ case "$withval" in
-  yes|no)
-  #
-  # Just in case anybody calls it without argument
-  #
-    AC_MSG_WARN([--with-nmbdsocketdir called without argument - will use default])
-  ;;
-  * )
-    nmbdsocketdir="$withval"
-    ;;
-  esac])
-
-#################################################
-# set SWAT directory location
-AC_ARG_WITH(swatdir,
-[AS_HELP_STRING([--with-swatdir=DIR], [Where to put SWAT files ($ac_default_prefix/swat)])],
-[ case "$withval" in
-  yes|no)
-  #
-  # Just in case anybody does it
-  #
-    AC_MSG_WARN([--with-swatdir called without argument - will use default])
-  ;;
-  * )
-    swatdir="$withval"
-    ;;
-  esac])
-
-#################################################
-# set configuration directory location
-AC_ARG_WITH(configdir,
-[AS_HELP_STRING([--with-configdir=DIR], [Where to put configuration files ($libdir)])],
-[ case "$withval" in
-  yes|no)
-  #
-  # Just in case anybody does it
-  #
-    AC_MSG_WARN([--with-configdir called without argument - will use default])
-  ;;
-  * )
-    configdir="$withval"
-    ;;
-  esac])
-
-#################################################
-# set log directory location
-AC_ARG_WITH(logfilebase,
-[AS_HELP_STRING([--with-logfilebase=DIR], [Where to put log files ($VARDIR)])],
-[ case "$withval" in
-  yes|no)
-  #
-  # Just in case anybody does it
-  #
-    AC_MSG_WARN([--with-logfilebase called without argument - will use default])
-  ;;
-  * )
-    logfilebase="$withval"
-    ;;
-  esac])
-
-
-#################################################
-# set shared modules (internal lib) directory location
-AC_ARG_WITH(modulesdir,
-[AS_HELP_STRING([--with-modulesdir=DIR], [Where to put shared modules ($libdir)])],
-[ case "$withval" in
-  yes|no)
-  #
-  # Just in case anybody does it
-  #
-    AC_MSG_WARN([--with-modulesdir without argument - will use default])
-  ;;
-  * )
-    modulesdir="$withval"
-    ;;
-  esac])
-
-#################################################
-# set PAM modules directory location
-AC_ARG_WITH(pammodulesdir,
-[AS_HELP_STRING([--with-pammodulesdir=DIR], [Which directory to use for PAM modules ($ac_default_prefix/$libdir/security)])],
-[ case "$withval" in
-  yes|no)
-  #
-  # Just in case anybody calls it without argument
-  #
-    AC_MSG_WARN([--with-pammodulesdir called without argument - will use default])
-  ;;
-  * )
-    pammodulesdir="$withval"
-    ;;
-  esac])
-
-#################################################
-# set man directory location
-AC_ARG_WITH(mandir,
-[AS_HELP_STRING([--with-mandir=DIR], [Where to put man pages ($mandir)])],
-[ case "$withval" in
-  yes|no)
-  #
-  # Just in case anybody does it
-  #
-    AC_MSG_WARN([--with-mandir without argument - will use default])
-  ;;
-  * )
-    mandir="$withval"
-    ;;
-  esac])
-
-################################################
-# set locale directory location
-AC_ARG_WITH(localedir,
-[AS_HELP_STRING([--with-localedir=DIR],[Where to put po files ($ac_default_prefix/share/locale)])],
-[ case "$withval" in
-  yes|no)
-    #
-    # Just in case anybody does it
-    #
-    AC_MSG_WARN([--with-localedir called without argument - will use default])
-  ;;
-  *)
-  localedir="$withval"
-  ;;
-  esac])
-
-#################################################
-# set codepage directory location
-AC_ARG_WITH(codepagedir,
-[AS_HELP_STRING([--with-codepagedir=DIR], [Where to put codepages ($ac_default_prefix/lib/samba)])],
-[ case "$withval" in
-  yes|no)
-  #
-  # Just in case anybody calls it without argument
-  #
-    AC_MSG_WARN([--with-codepagedir called without argument - will use default])
-  ;;
-  * )
-    codepagedir="$withval"
-    ;;
-  esac])
-
-
-AC_SUBST(configdir)
-AC_SUBST(lockdir)
-AC_SUBST(piddir)
-AC_SUBST(nmbdsocketdir)
-AC_SUBST(ncalrpcdir)
-AC_SUBST(logfilebase)
-AC_SUBST(privatedir)
-AC_SUBST(swatdir)
-AC_SUBST(bindir)
-AC_SUBST(sbindir)
-AC_SUBST(codepagedir)
-AC_SUBST(statedir)
-AC_SUBST(cachedir)
-AC_SUBST(pammodulesdir)
-AC_SUBST(modulesdir)
-AC_SUBST(localedir)
+m4_include(../dynconfig/config.m4)
 
 #################################################
 # set prefix for 'make test'