Merge branch 'master' of ssh://git.samba.org/data/git/samba into regsrv

Conflicts:
	source4/lib/registry/ldb.c
	source4/rpc_server/winreg/rpc_winreg.c

1 files changed, 0 insertions, 233 deletions

diff --git a/source4/lib/zlib/examples/fitblk.c b/source4/lib/zlib/examples/fitblk.c
deleted file mode 100644
index c61de5c996..0000000000
--- a/source4/lib/zlib/examples/fitblk.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/* fitblk.c: example of fitting compressed output to a specified size
-   Not copyrighted -- provided to the public domain
-   Version 1.1  25 November 2004  Mark Adler */
-
-/* Version history:
-   1.0  24 Nov 2004  First version
-   1.1  25 Nov 2004  Change deflateInit2() to deflateInit()
-                     Use fixed-size, stack-allocated raw buffers
-                     Simplify code moving compression to subroutines
-                     Use assert() for internal errors
-                     Add detailed description of approach
- */
-
-/* Approach to just fitting a requested compressed size:
-
-   fitblk performs three compression passes on a portion of the input
-   data in order to determine how much of that input will compress to
-   nearly the requested output block size.  The first pass generates
-   enough deflate blocks to produce output to fill the requested
-   output size plus a specfied excess amount (see the EXCESS define
-   below).  The last deflate block may go quite a bit past that, but
-   is discarded.  The second pass decompresses and recompresses just
-   the compressed data that fit in the requested plus excess sized
-   buffer.  The deflate process is terminated after that amount of
-   input, which is less than the amount consumed on the first pass.
-   The last deflate block of the result will be of a comparable size
-   to the final product, so that the header for that deflate block and
-   the compression ratio for that block will be about the same as in
-   the final product.  The third compression pass decompresses the
-   result of the second step, but only the compressed data up to the
-   requested size minus an amount to allow the compressed stream to
-   complete (see the MARGIN define below).  That will result in a
-   final compressed stream whose length is less than or equal to the
-   requested size.  Assuming sufficient input and a requested size
-   greater than a few hundred bytes, the shortfall will typically be
-   less than ten bytes.
-
-   If the input is short enough that the first compression completes
-   before filling the requested output size, then that compressed
-   stream is return with no recompression.
-
-   EXCESS is chosen to be just greater than the shortfall seen in a
-   two pass approach similar to the above.  That shortfall is due to
-   the last deflate block compressing more efficiently with a smaller
-   header on the second pass.  EXCESS is set to be large enough so
-   that there is enough uncompressed data for the second pass to fill
-   out the requested size, and small enough so that the final deflate
-   block of the second pass will be close in size to the final deflate
-   block of the third and final pass.  MARGIN is chosen to be just
-   large enough to assure that the final compression has enough room
-   to complete in all cases.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <assert.h>
-#include "zlib.h"
-
-#define local static
-
-/* print nastygram and leave */
-local void quit(char *why)
-{
-    fprintf(stderr, "fitblk abort: %s\n", why);
-    exit(1);
-}
-
-#define RAWLEN 4096    /* intermediate uncompressed buffer size */
-
-/* compress from file to def until provided buffer is full or end of
-   input reached; return last deflate() return value, or Z_ERRNO if
-   there was read error on the file */
-local int partcompress(FILE *in, z_streamp def)
-{
-    int ret, flush;
-    unsigned char raw[RAWLEN];
-
-    flush = Z_NO_FLUSH;
-    do {
-        def->avail_in = fread(raw, 1, RAWLEN, in);
-        if (ferror(in))
-            return Z_ERRNO;
-        def->next_in = raw;
-        if (feof(in))
-            flush = Z_FINISH;
-        ret = deflate(def, flush);
-        assert(ret != Z_STREAM_ERROR);
-    } while (def->avail_out != 0 && flush == Z_NO_FLUSH);
-    return ret;
-}
-
-/* recompress from inf's input to def's output; the input for inf and
-   the output for def are set in those structures before calling;
-   return last deflate() return value, or Z_MEM_ERROR if inflate()
-   was not able to allocate enough memory when it needed to */
-local int recompress(z_streamp inf, z_streamp def)
-{
-    int ret, flush;
-    unsigned char raw[RAWLEN];
-
-    flush = Z_NO_FLUSH;
-    do {
-        /* decompress */
-        inf->avail_out = RAWLEN;
-        inf->next_out = raw;
-        ret = inflate(inf, Z_NO_FLUSH);
-        assert(ret != Z_STREAM_ERROR && ret != Z_DATA_ERROR &&
-               ret != Z_NEED_DICT);
-        if (ret == Z_MEM_ERROR)
-            return ret;
-
-        /* compress what was decompresed until done or no room */
-        def->avail_in = RAWLEN - inf->avail_out;
-        def->next_in = raw;
-        if (inf->avail_out != 0)
-            flush = Z_FINISH;
-        ret = deflate(def, flush);
-        assert(ret != Z_STREAM_ERROR);
-    } while (ret != Z_STREAM_END && def->avail_out != 0);
-    return ret;
-}
-
-#define EXCESS 256      /* empirically determined stream overage */
-#define MARGIN 8        /* amount to back off for completion */
-
-/* compress from stdin to fixed-size block on stdout */
-int main(int argc, char **argv)
-{
-    int ret;                /* return code */
-    unsigned size;          /* requested fixed output block size */
-    unsigned have;          /* bytes written by deflate() call */
-    unsigned char *blk;     /* intermediate and final stream */
-    unsigned char *tmp;     /* close to desired size stream */
-    z_stream def, inf;      /* zlib deflate and inflate states */
-
-    /* get requested output size */
-    if (argc != 2)
-        quit("need one argument: size of output block");
-    ret = strtol(argv[1], argv + 1, 10);
-    if (argv[1][0] != 0)
-        quit("argument must be a number");
-    if (ret < 8)            /* 8 is minimum zlib stream size */
-        quit("need positive size of 8 or greater");
-    size = (unsigned)ret;
-
-    /* allocate memory for buffers and compression engine */
-    blk = malloc(size + EXCESS);
-    def.zalloc = Z_NULL;
-    def.zfree = Z_NULL;
-    def.opaque = Z_NULL;
-    ret = deflateInit(&def, Z_DEFAULT_COMPRESSION);
-    if (ret != Z_OK || blk == NULL)
-        quit("out of memory");
-
-    /* compress from stdin until output full, or no more input */
-    def.avail_out = size + EXCESS;
-    def.next_out = blk;
-    ret = partcompress(stdin, &def);
-    if (ret == Z_ERRNO)
-        quit("error reading input");
-
-    /* if it all fit, then size was undersubscribed -- done! */
-    if (ret == Z_STREAM_END && def.avail_out >= EXCESS) {
-        /* write block to stdout */
-        have = size + EXCESS - def.avail_out;
-        if (fwrite(blk, 1, have, stdout) != have || ferror(stdout))
-            quit("error writing output");
-
-        /* clean up and print results to stderr */
-        ret = deflateEnd(&def);
-        assert(ret != Z_STREAM_ERROR);
-        free(blk);
-        fprintf(stderr,
-                "%u bytes unused out of %u requested (all input)\n",
-                size - have, size);
-        return 0;
-    }
-
-    /* it didn't all fit -- set up for recompression */
-    inf.zalloc = Z_NULL;
-    inf.zfree = Z_NULL;
-    inf.opaque = Z_NULL;
-    inf.avail_in = 0;
-    inf.next_in = Z_NULL;
-    ret = inflateInit(&inf);
-    tmp = malloc(size + EXCESS);
-    if (ret != Z_OK || tmp == NULL)
-        quit("out of memory");
-    ret = deflateReset(&def);
-    assert(ret != Z_STREAM_ERROR);
-
-    /* do first recompression close to the right amount */
-    inf.avail_in = size + EXCESS;
-    inf.next_in = blk;
-    def.avail_out = size + EXCESS;
-    def.next_out = tmp;
-    ret = recompress(&inf, &def);
-    if (ret == Z_MEM_ERROR)
-        quit("out of memory");
-
-    /* set up for next reocmpression */
-    ret = inflateReset(&inf);
-    assert(ret != Z_STREAM_ERROR);
-    ret = deflateReset(&def);
-    assert(ret != Z_STREAM_ERROR);
-
-    /* do second and final recompression (third compression) */
-    inf.avail_in = size - MARGIN;   /* assure stream will complete */
-    inf.next_in = tmp;
-    def.avail_out = size;
-    def.next_out = blk;
-    ret = recompress(&inf, &def);
-    if (ret == Z_MEM_ERROR)
-        quit("out of memory");
-    assert(ret == Z_STREAM_END);    /* otherwise MARGIN too small */
-
-    /* done -- write block to stdout */
-    have = size - def.avail_out;
-    if (fwrite(blk, 1, have, stdout) != have || ferror(stdout))
-        quit("error writing output");
-
-    /* clean up and print results to stderr */
-    free(tmp);
-    ret = inflateEnd(&inf);
-    assert(ret != Z_STREAM_ERROR);
-    ret = deflateEnd(&def);
-    assert(ret != Z_STREAM_ERROR);
-    free(blk);
-    fprintf(stderr,
-            "%u bytes unused out of %u requested (%lu input)\n",
-            size - have, size, def.total_in);
-    return 0;
-}