Move zlib to top-level root.

10 files changed, 0 insertions, 3505 deletions

diff --git a/source4/lib/zlib/examples/README.examples b/source4/lib/zlib/examples/README.examples
deleted file mode 100644
index 5632d7a4cc..0000000000
--- a/source4/lib/zlib/examples/README.examples
+++ /dev/null
@@ -1,42 +0,0 @@
-This directory contains examples of the use of zlib.
-
-fitblk.c
-    compress just enough input to nearly fill a requested output size
-    - zlib isn't designed to do this, but fitblk does it anyway
-
-gun.c
-    uncompress a gzip file
-    - illustrates the use of inflateBack() for high speed file-to-file
-      decompression using call-back functions
-    - is approximately twice as fast as gzip -d
-    - also provides Unix uncompress functionality, again twice as fast
-
-gzappend.c
-    append to a gzip file
-    - illustrates the use of the Z_BLOCK flush parameter for inflate()
-    - illustrates the use of deflatePrime() to start at any bit
-
-gzjoin.c
-    join gzip files without recalculating the crc or recompressing
-    - illustrates the use of the Z_BLOCK flush parameter for inflate()
-    - illustrates the use of crc32_combine()
-
-gzlog.c
-gzlog.h
-    efficiently maintain a message log file in gzip format
-    - illustrates use of raw deflate and Z_SYNC_FLUSH
-    - illustrates use of gzip header extra field
-
-zlib_how.html
-    painfully comprehensive description of zpipe.c (see below)
-    - describes in excruciating detail the use of deflate() and inflate()
-
-zpipe.c
-    reads and writes zlib streams from stdin to stdout
-    - illustrates the proper use of deflate() and inflate()
-    - deeply commented in zlib_how.html (see above)
-
-zran.c
-    index a zlib or gzip stream and randomly access it
-    - illustrates the use of Z_BLOCK, inflatePrime(), and
-      inflateSetDictionary() to provide random access
diff --git a/source4/lib/zlib/examples/fitblk.c b/source4/lib/zlib/examples/fitblk.c
deleted file mode 100644
index c61de5c996..0000000000
--- a/source4/lib/zlib/examples/fitblk.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/* fitblk.c: example of fitting compressed output to a specified size
-   Not copyrighted -- provided to the public domain
-   Version 1.1  25 November 2004  Mark Adler */
-
-/* Version history:
-   1.0  24 Nov 2004  First version
-   1.1  25 Nov 2004  Change deflateInit2() to deflateInit()
-                     Use fixed-size, stack-allocated raw buffers
-                     Simplify code moving compression to subroutines
-                     Use assert() for internal errors
-                     Add detailed description of approach
- */
-
-/* Approach to just fitting a requested compressed size:
-
-   fitblk performs three compression passes on a portion of the input
-   data in order to determine how much of that input will compress to
-   nearly the requested output block size.  The first pass generates
-   enough deflate blocks to produce output to fill the requested
-   output size plus a specfied excess amount (see the EXCESS define
-   below).  The last deflate block may go quite a bit past that, but
-   is discarded.  The second pass decompresses and recompresses just
-   the compressed data that fit in the requested plus excess sized
-   buffer.  The deflate process is terminated after that amount of
-   input, which is less than the amount consumed on the first pass.
-   The last deflate block of the result will be of a comparable size
-   to the final product, so that the header for that deflate block and
-   the compression ratio for that block will be about the same as in
-   the final product.  The third compression pass decompresses the
-   result of the second step, but only the compressed data up to the
-   requested size minus an amount to allow the compressed stream to
-   complete (see the MARGIN define below).  That will result in a
-   final compressed stream whose length is less than or equal to the
-   requested size.  Assuming sufficient input and a requested size
-   greater than a few hundred bytes, the shortfall will typically be
-   less than ten bytes.
-
-   If the input is short enough that the first compression completes
-   before filling the requested output size, then that compressed
-   stream is return with no recompression.
-
-   EXCESS is chosen to be just greater than the shortfall seen in a
-   two pass approach similar to the above.  That shortfall is due to
-   the last deflate block compressing more efficiently with a smaller
-   header on the second pass.  EXCESS is set to be large enough so
-   that there is enough uncompressed data for the second pass to fill
-   out the requested size, and small enough so that the final deflate
-   block of the second pass will be close in size to the final deflate
-   block of the third and final pass.  MARGIN is chosen to be just
-   large enough to assure that the final compression has enough room
-   to complete in all cases.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <assert.h>
-#include "zlib.h"
-
-#define local static
-
-/* print nastygram and leave */
-local void quit(char *why)
-{
-    fprintf(stderr, "fitblk abort: %s\n", why);
-    exit(1);
-}
-
-#define RAWLEN 4096    /* intermediate uncompressed buffer size */
-
-/* compress from file to def until provided buffer is full or end of
-   input reached; return last deflate() return value, or Z_ERRNO if
-   there was read error on the file */
-local int partcompress(FILE *in, z_streamp def)
-{
-    int ret, flush;
-    unsigned char raw[RAWLEN];
-
-    flush = Z_NO_FLUSH;
-    do {
-        def->avail_in = fread(raw, 1, RAWLEN, in);
-        if (ferror(in))
-            return Z_ERRNO;
-        def->next_in = raw;
-        if (feof(in))
-            flush = Z_FINISH;
-        ret = deflate(def, flush);
-        assert(ret != Z_STREAM_ERROR);
-    } while (def->avail_out != 0 && flush == Z_NO_FLUSH);
-    return ret;
-}
-
-/* recompress from inf's input to def's output; the input for inf and
-   the output for def are set in those structures before calling;
-   return last deflate() return value, or Z_MEM_ERROR if inflate()
-   was not able to allocate enough memory when it needed to */
-local int recompress(z_streamp inf, z_streamp def)
-{
-    int ret, flush;
-    unsigned char raw[RAWLEN];
-
-    flush = Z_NO_FLUSH;
-    do {
-        /* decompress */
-        inf->avail_out = RAWLEN;
-        inf->next_out = raw;
-        ret = inflate(inf, Z_NO_FLUSH);
-        assert(ret != Z_STREAM_ERROR && ret != Z_DATA_ERROR &&
-               ret != Z_NEED_DICT);
-        if (ret == Z_MEM_ERROR)
-            return ret;
-
-        /* compress what was decompresed until done or no room */
-        def->avail_in = RAWLEN - inf->avail_out;
-        def->next_in = raw;
-        if (inf->avail_out != 0)
-            flush = Z_FINISH;
-        ret = deflate(def, flush);
-        assert(ret != Z_STREAM_ERROR);
-    } while (ret != Z_STREAM_END && def->avail_out != 0);
-    return ret;
-}
-
-#define EXCESS 256      /* empirically determined stream overage */
-#define MARGIN 8        /* amount to back off for completion */
-
-/* compress from stdin to fixed-size block on stdout */
-int main(int argc, char **argv)
-{
-    int ret;                /* return code */
-    unsigned size;          /* requested fixed output block size */
-    unsigned have;          /* bytes written by deflate() call */
-    unsigned char *blk;     /* intermediate and final stream */
-    unsigned char *tmp;     /* close to desired size stream */
-    z_stream def, inf;      /* zlib deflate and inflate states */
-
-    /* get requested output size */
-    if (argc != 2)
-        quit("need one argument: size of output block");
-    ret = strtol(argv[1], argv + 1, 10);
-    if (argv[1][0] != 0)
-        quit("argument must be a number");
-    if (ret < 8)            /* 8 is minimum zlib stream size */
-        quit("need positive size of 8 or greater");
-    size = (unsigned)ret;
-
-    /* allocate memory for buffers and compression engine */
-    blk = malloc(size + EXCESS);
-    def.zalloc = Z_NULL;
-    def.zfree = Z_NULL;
-    def.opaque = Z_NULL;
-    ret = deflateInit(&def, Z_DEFAULT_COMPRESSION);
-    if (ret != Z_OK || blk == NULL)
-        quit("out of memory");
-
-    /* compress from stdin until output full, or no more input */
-    def.avail_out = size + EXCESS;
-    def.next_out = blk;
-    ret = partcompress(stdin, &def);
-    if (ret == Z_ERRNO)
-        quit("error reading input");
-
-    /* if it all fit, then size was undersubscribed -- done! */
-    if (ret == Z_STREAM_END && def.avail_out >= EXCESS) {
-        /* write block to stdout */
-        have = size + EXCESS - def.avail_out;
-        if (fwrite(blk, 1, have, stdout) != have || ferror(stdout))
-            quit("error writing output");
-
-        /* clean up and print results to stderr */
-        ret = deflateEnd(&def);
-        assert(ret != Z_STREAM_ERROR);
-        free(blk);
-        fprintf(stderr,
-                "%u bytes unused out of %u requested (all input)\n",
-                size - have, size);
-        return 0;
-    }
-
-    /* it didn't all fit -- set up for recompression */
-    inf.zalloc = Z_NULL;
-    inf.zfree = Z_NULL;
-    inf.opaque = Z_NULL;
-    inf.avail_in = 0;
-    inf.next_in = Z_NULL;
-    ret = inflateInit(&inf);
-    tmp = malloc(size + EXCESS);
-    if (ret != Z_OK || tmp == NULL)
-        quit("out of memory");
-    ret = deflateReset(&def);
-    assert(ret != Z_STREAM_ERROR);
-
-    /* do first recompression close to the right amount */
-    inf.avail_in = size + EXCESS;
-    inf.next_in = blk;
-    def.avail_out = size + EXCESS;
-    def.next_out = tmp;
-    ret = recompress(&inf, &def);
-    if (ret == Z_MEM_ERROR)
-        quit("out of memory");
-
-    /* set up for next reocmpression */
-    ret = inflateReset(&inf);
-    assert(ret != Z_STREAM_ERROR);
-    ret = deflateReset(&def);
-    assert(ret != Z_STREAM_ERROR);
-
-    /* do second and final recompression (third compression) */
-    inf.avail_in = size - MARGIN;   /* assure stream will complete */
-    inf.next_in = tmp;
-    def.avail_out = size;
-    def.next_out = blk;
-    ret = recompress(&inf, &def);
-    if (ret == Z_MEM_ERROR)
-        quit("out of memory");
-    assert(ret == Z_STREAM_END);    /* otherwise MARGIN too small */
-
-    /* done -- write block to stdout */
-    have = size - def.avail_out;
-    if (fwrite(blk, 1, have, stdout) != have || ferror(stdout))
-        quit("error writing output");
-
-    /* clean up and print results to stderr */
-    free(tmp);
-    ret = inflateEnd(&inf);
-    assert(ret != Z_STREAM_ERROR);
-    ret = deflateEnd(&def);
-    assert(ret != Z_STREAM_ERROR);
-    free(blk);
-    fprintf(stderr,
-            "%u bytes unused out of %u requested (%lu input)\n",
-            size - have, size, def.total_in);
-    return 0;
-}
diff --git a/source4/lib/zlib/examples/gun.c b/source4/lib/zlib/examples/gun.c
deleted file mode 100644
index bfec590a00..0000000000
--- a/source4/lib/zlib/examples/gun.c
+++ /dev/null
@@ -1,693 +0,0 @@
-/* gun.c -- simple gunzip to give an example of the use of inflateBack()
- * Copyright (C) 2003, 2005 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
-   Version 1.3  12 June 2005  Mark Adler */
-
-/* Version history:
-   1.0  16 Feb 2003  First version for testing of inflateBack()
-   1.1  21 Feb 2005  Decompress concatenated gzip streams
-                     Remove use of "this" variable (C++ keyword)
-                     Fix return value for in()
-                     Improve allocation failure checking
-                     Add typecasting for void * structures
-                     Add -h option for command version and usage
-                     Add a bunch of comments
-   1.2  20 Mar 2005  Add Unix compress (LZW) decompression
-                     Copy file attributes from input file to output file
-   1.3  12 Jun 2005  Add casts for error messages [Oberhumer]
- */
-
-/*
-   gun [ -t ] [ name ... ]
-
-   decompresses the data in the named gzip files.  If no arguments are given,
-   gun will decompress from stdin to stdout.  The names must end in .gz, -gz,
-   .z, -z, _z, or .Z.  The uncompressed data will be written to a file name
-   with the suffix stripped.  On success, the original file is deleted.  On
-   failure, the output file is deleted.  For most failures, the command will
-   continue to process the remaining names on the command line.  A memory
-   allocation failure will abort the command.  If -t is specified, then the
-   listed files or stdin will be tested as gzip files for integrity (without
-   checking for a proper suffix), no output will be written, and no files
-   will be deleted.
-
-   Like gzip, gun allows concatenated gzip streams and will decompress them,
-   writing all of the uncompressed data to the output.  Unlike gzip, gun allows
-   an empty file on input, and will produce no error writing an empty output
-   file.
-
-   gun will also decompress files made by Unix compress, which uses LZW
-   compression.  These files are automatically detected by virtue of their
-   magic header bytes.  Since the end of Unix compress stream is marked by the
-   end-of-file, they cannot be concantenated.  If a Unix compress stream is
-   encountered in an input file, it is the last stream in that file.
-
-   Like gunzip and uncompress, the file attributes of the orignal compressed
-   file are maintained in the final uncompressed file, to the extent that the
-   user permissions allow it.
-
-   On my Mac OS X PowerPC G4, gun is almost twice as fast as gunzip (version
-   1.2.4) is on the same file, when gun is linked with zlib 1.2.2.  Also the
-   LZW decompression provided by gun is about twice as fast as the standard
-   Unix uncompress command.
- */
-
-/* external functions and related types and constants */
-#include <stdio.h>          /* fprintf() */
-#include <stdlib.h>         /* malloc(), free() */
-#include <string.h>         /* strerror(), strcmp(), strlen(), memcpy() */
-#include <errno.h>          /* errno */
-#include <fcntl.h>          /* open() */
-#include <unistd.h>         /* read(), write(), close(), chown(), unlink() */
-#include <sys/types.h>
-#include <sys/stat.h>       /* stat(), chmod() */
-#include <utime.h>          /* utime() */
-#include "zlib.h"           /* inflateBackInit(), inflateBack(), */
-                            /* inflateBackEnd(), crc32() */
-
-/* function declaration */
-#define local static
-
-/* buffer constants */
-#define SIZE 32768U         /* input and output buffer sizes */
-#define PIECE 16384         /* limits i/o chunks for 16-bit int case */
-
-/* structure for infback() to pass to input function in() -- it maintains the
-   input file and a buffer of size SIZE */
-struct ind {
-    int infile;
-    unsigned char *inbuf;
-};
-
-/* Load input buffer, assumed to be empty, and return bytes loaded and a
-   pointer to them.  read() is called until the buffer is full, or until it
-   returns end-of-file or error.  Return 0 on error. */
-local unsigned in(void *in_desc, unsigned char **buf)
-{
-    int ret;
-    unsigned len;
-    unsigned char *next;
-    struct ind *me = (struct ind *)in_desc;
-
-    next = me->inbuf;
-    *buf = next;
-    len = 0;
-    do {
-        ret = PIECE;
-        if ((unsigned)ret > SIZE - len)
-            ret = (int)(SIZE - len);
-        ret = (int)read(me->infile, next, ret);
-        if (ret == -1) {
-            len = 0;
-            break;
-        }
-        next += ret;
-        len += ret;
-    } while (ret != 0 && len < SIZE);
-    return len;
-}
-
-/* structure for infback() to pass to output function out() -- it maintains the
-   output file, a running CRC-32 check on the output and the total number of
-   bytes output, both for checking against the gzip trailer.  (The length in
-   the gzip trailer is stored modulo 2^32, so it's ok if a long is 32 bits and
-   the output is greater than 4 GB.) */
-struct outd {
-    int outfile;
-    int check;                  /* true if checking crc and total */
-    unsigned long crc;
-    unsigned long total;
-};
-
-/* Write output buffer and update the CRC-32 and total bytes written.  write()
-   is called until all of the output is written or an error is encountered.
-   On success out() returns 0.  For a write failure, out() returns 1.  If the
-   output file descriptor is -1, then nothing is written.
- */
-local int out(void *out_desc, unsigned char *buf, unsigned len)
-{
-    int ret;
-    struct outd *me = (struct outd *)out_desc;
-
-    if (me->check) {
-        me->crc = crc32(me->crc, buf, len);
-        me->total += len;
-    }
-    if (me->outfile != -1)
-        do {
-            ret = PIECE;
-            if ((unsigned)ret > len)
-                ret = (int)len;
-            ret = (int)write(me->outfile, buf, ret);
-            if (ret == -1)
-                return 1;
-            buf += ret;
-            len -= ret;
-        } while (len != 0);
-    return 0;
-}
-
-/* next input byte macro for use inside lunpipe() and gunpipe() */
-#define NEXT() (have ? 0 : (have = in(indp, &next)), \
-                last = have ? (have--, (int)(*next++)) : -1)
-
-/* memory for gunpipe() and lunpipe() --
-   the first 256 entries of prefix[] and suffix[] are never used, could
-   have offset the index, but it's faster to waste the memory */
-unsigned char inbuf[SIZE];              /* input buffer */
-unsigned char outbuf[SIZE];             /* output buffer */
-unsigned short prefix[65536];           /* index to LZW prefix string */
-unsigned char suffix[65536];            /* one-character LZW suffix */
-unsigned char match[65280 + 2];         /* buffer for reversed match or gzip
-                                           32K sliding window */
-
-/* throw out what's left in the current bits byte buffer (this is a vestigial
-   aspect of the compressed data format derived from an implementation that
-   made use of a special VAX machine instruction!) */
-#define FLUSHCODE() \
-    do { \
-        left = 0; \
-        rem = 0; \
-        if (chunk > have) { \
-            chunk -= have; \
-            have = 0; \
-            if (NEXT() == -1) \
-                break; \
-            chunk--; \
-            if (chunk > have) { \
-                chunk = have = 0; \
-                break; \
-            } \
-        } \
-        have -= chunk; \
-        next += chunk; \
-        chunk = 0; \
-    } while (0)
-
-/* Decompress a compress (LZW) file from indp to outfile.  The compress magic
-   header (two bytes) has already been read and verified.  There are have bytes
-   of buffered input at next.  strm is used for passing error information back
-   to gunpipe().
-
-   lunpipe() will return Z_OK on success, Z_BUF_ERROR for an unexpected end of
-   file, read error, or write error (a write error indicated by strm->next_in
-   not equal to Z_NULL), or Z_DATA_ERROR for invalid input.
- */
-local int lunpipe(unsigned have, unsigned char *next, struct ind *indp,
-                  int outfile, z_stream *strm)
-{
-    int last;                   /* last byte read by NEXT(), or -1 if EOF */
-    int chunk;                  /* bytes left in current chunk */
-    int left;                   /* bits left in rem */
-    unsigned rem;               /* unused bits from input */
-    int bits;                   /* current bits per code */
-    unsigned code;              /* code, table traversal index */
-    unsigned mask;              /* mask for current bits codes */
-    int max;                    /* maximum bits per code for this stream */
-    int flags;                  /* compress flags, then block compress flag */
-    unsigned end;               /* last valid entry in prefix/suffix tables */
-    unsigned temp;              /* current code */
-    unsigned prev;              /* previous code */
-    unsigned final;             /* last character written for previous code */
-    unsigned stack;             /* next position for reversed string */
-    unsigned outcnt;            /* bytes in output buffer */
-    struct outd outd;           /* output structure */
-
-    /* set up output */
-    outd.outfile = outfile;
-    outd.check = 0;
-
-    /* process remainder of compress header -- a flags byte */
-    flags = NEXT();
-    if (last == -1)
-        return Z_BUF_ERROR;
-    if (flags & 0x60) {
-        strm->msg = (char *)"unknown lzw flags set";
-        return Z_DATA_ERROR;
-    }
-    max = flags & 0x1f;
-    if (max < 9 || max > 16) {
-        strm->msg = (char *)"lzw bits out of range";
-        return Z_DATA_ERROR;
-    }
-    if (max == 9)                           /* 9 doesn't really mean 9 */
-        max = 10;
-    flags &= 0x80;                          /* true if block compress */
-
-    /* clear table */
-    bits = 9;
-    mask = 0x1ff;
-    end = flags ? 256 : 255;
-
-    /* set up: get first 9-bit code, which is the first decompressed byte, but
-       don't create a table entry until the next code */
-    if (NEXT() == -1)                       /* no compressed data is ok */
-        return Z_OK;
-    final = prev = (unsigned)last;          /* low 8 bits of code */
-    if (NEXT() == -1)                       /* missing a bit */
-        return Z_BUF_ERROR;
-    if (last & 1) {                         /* code must be < 256 */
-        strm->msg = (char *)"invalid lzw code";
-        return Z_DATA_ERROR;
-    }
-    rem = (unsigned)last >> 1;              /* remaining 7 bits */
-    left = 7;
-    chunk = bits - 2;                       /* 7 bytes left in this chunk */
-    outbuf[0] = (unsigned char)final;       /* write first decompressed byte */
-    outcnt = 1;
-
-    /* decode codes */
-    stack = 0;
-    for (;;) {
-        /* if the table will be full after this, increment the code size */
-        if (end >= mask && bits < max) {
-            FLUSHCODE();
-            bits++;
-            mask <<= 1;
-            mask++;
-        }
-
-        /* get a code of length bits */
-        if (chunk == 0)                     /* decrement chunk modulo bits */
-            chunk = bits;
-        code = rem;                         /* low bits of code */
-        if (NEXT() == -1) {                 /* EOF is end of compressed data */
-            /* write remaining buffered output */
-            if (outcnt && out(&outd, outbuf, outcnt)) {
-                strm->next_in = outbuf;     /* signal write error */
-                return Z_BUF_ERROR;
-            }
-            return Z_OK;
-        }
-        code += (unsigned)last << left;     /* middle (or high) bits of code */
-        left += 8;
-        chunk--;
-        if (bits > left) {                  /* need more bits */
-            if (NEXT() == -1)               /* can't end in middle of code */
-                return Z_BUF_ERROR;
-            code += (unsigned)last << left; /* high bits of code */
-            left += 8;
-            chunk--;
-        }
-        code &= mask;                       /* mask to current code length */
-        left -= bits;                       /* number of unused bits */
-        rem = (unsigned)last >> (8 - left); /* unused bits from last byte */
-
-        /* process clear code (256) */
-        if (code == 256 && flags) {
-            FLUSHCODE();
-            bits = 9;                       /* initialize bits and mask */
-            mask = 0x1ff;
-            end = 255;                      /* empty table */
-            continue;                       /* get next code */
-        }
-
-        /* special code to reuse last match */
-        temp = code;                        /* save the current code */
-        if (code > end) {
-            /* Be picky on the allowed code here, and make sure that the code
-               we drop through (prev) will be a valid index so that random
-               input does not cause an exception.  The code != end + 1 check is
-               empirically derived, and not checked in the original uncompress
-               code.  If this ever causes a problem, that check could be safely
-               removed.  Leaving this check in greatly improves gun's ability
-               to detect random or corrupted input after a compress header.
-               In any case, the prev > end check must be retained. */
-            if (code != end + 1 || prev > end) {
-                strm->msg = (char *)"invalid lzw code";
-                return Z_DATA_ERROR;
-            }
-            match[stack++] = (unsigned char)final;
-            code = prev;
-        }
-
-        /* walk through linked list to generate output in reverse order */
-        while (code >= 256) {
-            match[stack++] = suffix[code];
-            code = prefix[code];
-        }
-        match[stack++] = (unsigned char)code;
-        final = code;
-
-        /* link new table entry */
-        if (end < mask) {
-            end++;
-            prefix[end] = (unsigned short)prev;
-            suffix[end] = (unsigned char)final;
-        }
-
-        /* set previous code for next iteration */
-        prev = temp;
-
-        /* write output in forward order */
-        while (stack > SIZE - outcnt) {
-            while (outcnt < SIZE)
-                outbuf[outcnt++] = match[--stack];
-            if (out(&outd, outbuf, outcnt)) {
-                strm->next_in = outbuf; /* signal write error */
-                return Z_BUF_ERROR;
-            }
-            outcnt = 0;
-        }
-        do {
-            outbuf[outcnt++] = match[--stack];
-        } while (stack);
-
-        /* loop for next code with final and prev as the last match, rem and
-           left provide the first 0..7 bits of the next code, end is the last
-           valid table entry */
-    }
-}
-
-/* Decompress a gzip file from infile to outfile.  strm is assumed to have been
-   successfully initialized with inflateBackInit().  The input file may consist
-   of a series of gzip streams, in which case all of them will be decompressed
-   to the output file.  If outfile is -1, then the gzip stream(s) integrity is
-   checked and nothing is written.
-
-   The return value is a zlib error code: Z_MEM_ERROR if out of memory,
-   Z_DATA_ERROR if the header or the compressed data is invalid, or if the
-   trailer CRC-32 check or length doesn't match, Z_BUF_ERROR if the input ends
-   prematurely or a write error occurs, or Z_ERRNO if junk (not a another gzip
-   stream) follows a valid gzip stream.
- */
-local int gunpipe(z_stream *strm, int infile, int outfile)
-{
-    int ret, first, last;
-    unsigned have, flags, len;
-    unsigned char *next;
-    struct ind ind, *indp;
-    struct outd outd;
-
-    /* setup input buffer */
-    ind.infile = infile;
-    ind.inbuf = inbuf;
-    indp = &ind;
-
-    /* decompress concatenated gzip streams */
-    have = 0;                               /* no input data read in yet */
-    first = 1;                              /* looking for first gzip header */
-    strm->next_in = Z_NULL;                 /* so Z_BUF_ERROR means EOF */
-    for (;;) {
-        /* look for the two magic header bytes for a gzip stream */
-        if (NEXT() == -1) {
-            ret = Z_OK;
-            break;                          /* empty gzip stream is ok */
-        }
-        if (last != 31 || (NEXT() != 139 && last != 157)) {
-            strm->msg = (char *)"incorrect header check";
-            ret = first ? Z_DATA_ERROR : Z_ERRNO;
-            break;                          /* not a gzip or compress header */
-        }
-        first = 0;                          /* next non-header is junk */
-
-        /* process a compress (LZW) file -- can't be concatenated after this */
-        if (last == 157) {
-            ret = lunpipe(have, next, indp, outfile, strm);
-            break;
-        }
-
-        /* process remainder of gzip header */
-        ret = Z_BUF_ERROR;
-        if (NEXT() != 8) {                  /* only deflate method allowed */
-            if (last == -1) break;
-            strm->msg = (char *)"unknown compression method";
-            ret = Z_DATA_ERROR;
-            break;
-        }
-        flags = NEXT();                     /* header flags */
-        NEXT();                             /* discard mod time, xflgs, os */
-        NEXT();
-        NEXT();
-        NEXT();
-        NEXT();
-        NEXT();
-        if (last == -1) break;
-        if (flags & 0xe0) {
-            strm->msg = (char *)"unknown header flags set";
-            ret = Z_DATA_ERROR;
-            break;
-        }
-        if (flags & 4) {                    /* extra field */
-            len = NEXT();
-            len += (unsigned)(NEXT()) << 8;
-            if (last == -1) break;
-            while (len > have) {
-                len -= have;
-                have = 0;
-                if (NEXT() == -1) break;
-                len--;
-            }
-            if (last == -1) break;
-            have -= len;
-            next += len;
-        }
-        if (flags & 8)                      /* file name */
-            while (NEXT() != 0 && last != -1)
-                ;
-        if (flags & 16)                     /* comment */
-            while (NEXT() != 0 && last != -1)
-                ;
-        if (flags & 2) {                    /* header crc */
-            NEXT();
-            NEXT();
-        }
-        if (last == -1) break;
-
-        /* set up output */
-        outd.outfile = outfile;
-        outd.check = 1;
-        outd.crc = crc32(0L, Z_NULL, 0);
-        outd.total = 0;
-
-        /* decompress data to output */
-        strm->next_in = next;
-        strm->avail_in = have;
-        ret = inflateBack(strm, in, indp, out, &outd);
-        if (ret != Z_STREAM_END) break;
-        next = strm->next_in;
-        have = strm->avail_in;
-        strm->next_in = Z_NULL;             /* so Z_BUF_ERROR means EOF */
-
-        /* check trailer */
-        ret = Z_BUF_ERROR;
-        if (NEXT() != (outd.crc & 0xff) ||
-            NEXT() != ((outd.crc >> 8) & 0xff) ||
-            NEXT() != ((outd.crc >> 16) & 0xff) ||
-            NEXT() != ((outd.crc >> 24) & 0xff)) {
-            /* crc error */
-            if (last != -1) {
-                strm->msg = (char *)"incorrect data check";
-                ret = Z_DATA_ERROR;
-            }
-            break;
-        }
-        if (NEXT() != (outd.total & 0xff) ||
-            NEXT() != ((outd.total >> 8) & 0xff) ||
-            NEXT() != ((outd.total >> 16) & 0xff) ||
-            NEXT() != ((outd.total >> 24) & 0xff)) {
-            /* length error */
-            if (last != -1) {
-                strm->msg = (char *)"incorrect length check";
-                ret = Z_DATA_ERROR;
-            }
-            break;
-        }
-
-        /* go back and look for another gzip stream */
-    }
-
-    /* clean up and return */
-    return ret;
-}
-
-/* Copy file attributes, from -> to, as best we can.  This is best effort, so
-   no errors are reported.  The mode bits, including suid, sgid, and the sticky
-   bit are copied (if allowed), the owner's user id and group id are copied
-   (again if allowed), and the access and modify times are copied. */
-local void copymeta(char *from, char *to)
-{
-    struct stat was;
-    struct utimbuf when;
-
-    /* get all of from's Unix meta data, return if not a regular file */
-    if (stat(from, &was) != 0 || (was.st_mode & S_IFMT) != S_IFREG)
-        return;
-
-    /* set to's mode bits, ignore errors */
-    (void)chmod(to, was.st_mode & 07777);
-
-    /* copy owner's user and group, ignore errors */
-    (void)chown(to, was.st_uid, was.st_gid);
-
-    /* copy access and modify times, ignore errors */
-    when.actime = was.st_atime;
-    when.modtime = was.st_mtime;
-    (void)utime(to, &when);
-}
-
-/* Decompress the file inname to the file outnname, of if test is true, just
-   decompress without writing and check the gzip trailer for integrity.  If
-   inname is NULL or an empty string, read from stdin.  If outname is NULL or
-   an empty string, write to stdout.  strm is a pre-initialized inflateBack
-   structure.  When appropriate, copy the file attributes from inname to
-   outname.
-
-   gunzip() returns 1 if there is an out-of-memory error or an unexpected
-   return code from gunpipe().  Otherwise it returns 0.
- */
-local int gunzip(z_stream *strm, char *inname, char *outname, int test)
-{
-    int ret;
-    int infile, outfile;
-
-    /* open files */
-    if (inname == NULL || *inname == 0) {
-        inname = "-";
-        infile = 0;     /* stdin */
-    }
-    else {
-        infile = open(inname, O_RDONLY, 0);
-        if (infile == -1) {
-            fprintf(stderr, "gun cannot open %s\n", inname);
-            return 0;
-        }
-    }
-    if (test)
-        outfile = -1;
-    else if (outname == NULL || *outname == 0) {
-        outname = "-";
-        outfile = 1;    /* stdout */
-    }
-    else {
-        outfile = open(outname, O_CREAT | O_TRUNC | O_WRONLY, 0666);
-        if (outfile == -1) {
-            close(infile);
-            fprintf(stderr, "gun cannot create %s\n", outname);
-            return 0;
-        }
-    }
-    errno = 0;
-
-    /* decompress */
-    ret = gunpipe(strm, infile, outfile);
-    if (outfile > 2) close(outfile);
-    if (infile > 2) close(infile);
-
-    /* interpret result */
-    switch (ret) {
-    case Z_OK:
-    case Z_ERRNO:
-        if (infile > 2 && outfile > 2) {
-            copymeta(inname, outname);          /* copy attributes */
-            unlink(inname);
-        }
-        if (ret == Z_ERRNO)
-            fprintf(stderr, "gun warning: trailing garbage ignored in %s\n",
-                    inname);
-        break;
-    case Z_DATA_ERROR:
-        if (outfile > 2) unlink(outname);
-        fprintf(stderr, "gun data error on %s: %s\n", inname, strm->msg);
-        break;
-    case Z_MEM_ERROR:
-        if (outfile > 2) unlink(outname);
-        fprintf(stderr, "gun out of memory error--aborting\n");
-        return 1;
-    case Z_BUF_ERROR:
-        if (outfile > 2) unlink(outname);
-        if (strm->next_in != Z_NULL) {
-            fprintf(stderr, "gun write error on %s: %s\n",
-                    outname, strerror(errno));
-        }
-        else if (errno) {
-            fprintf(stderr, "gun read error on %s: %s\n",
-                    inname, strerror(errno));
-        }
-        else {
-            fprintf(stderr, "gun unexpected end of file on %s\n",
-                    inname);
-        }
-        break;
-    default:
-        if (outfile > 2) unlink(outname);
-        fprintf(stderr, "gun internal error--aborting\n");
-        return 1;
-    }
-    return 0;
-}
-
-/* Process the gun command line arguments.  See the command syntax near the
-   beginning of this source file. */
-int main(int argc, char **argv)
-{
-    int ret, len, test;
-    char *outname;
-    unsigned char *window;
-    z_stream strm;
-
-    /* initialize inflateBack state for repeated use */
-    window = match;                         /* reuse LZW match buffer */
-    strm.zalloc = Z_NULL;
-    strm.zfree = Z_NULL;
-    strm.opaque = Z_NULL;
-    ret = inflateBackInit(&strm, 15, window);
-    if (ret != Z_OK) {
-        fprintf(stderr, "gun out of memory error--aborting\n");
-        return 1;
-    }
-
-    /* decompress each file to the same name with the suffix removed */
-    argc--;
-    argv++;
-    test = 0;
-    if (argc && strcmp(*argv, "-h") == 0) {
-        fprintf(stderr, "gun 1.3 (12 Jun 2005)\n");
-        fprintf(stderr, "Copyright (c) 2005 Mark Adler\n");
-        fprintf(stderr, "usage: gun [-t] [file1.gz [file2.Z ...]]\n");
-        return 0;
-    }
-    if (argc && strcmp(*argv, "-t") == 0) {
-        test = 1;
-        argc--;
-        argv++;
-    }
-    if (argc)
-        do {
-            if (test)
-                outname = NULL;
-            else {
-                len = (int)strlen(*argv);
-                if (strcmp(*argv + len - 3, ".gz") == 0 ||
-                    strcmp(*argv + len - 3, "-gz") == 0)
-                    len -= 3;
-                else if (strcmp(*argv + len - 2, ".z") == 0 ||
-                    strcmp(*argv + len - 2, "-z") == 0 ||
-                    strcmp(*argv + len - 2, "_z") == 0 ||
-                    strcmp(*argv + len - 2, ".Z") == 0)
-                    len -= 2;
-                else {
-                    fprintf(stderr, "gun error: no gz type on %s--skipping\n",
-                            *argv);
-                    continue;
-                }
-                outname = malloc(len + 1);
-                if (outname == NULL) {
-                    fprintf(stderr, "gun out of memory error--aborting\n");
-                    ret = 1;
-                    break;
-                }
-                memcpy(outname, *argv, len);
-                outname[len] = 0;
-            }
-            ret = gunzip(&strm, *argv, outname, test);
-            if (outname != NULL) free(outname);
-            if (ret) break;
-        } while (argv++, --argc);
-    else
-        ret = gunzip(&strm, NULL, NULL, test);
-
-    /* clean up */
-    inflateBackEnd(&strm);
-    return ret;
-}
diff --git a/source4/lib/zlib/examples/gzappend.c b/source4/lib/zlib/examples/gzappend.c
deleted file mode 100644
index e9e878e116..0000000000
--- a/source4/lib/zlib/examples/gzappend.c
+++ /dev/null
@@ -1,500 +0,0 @@
-/* gzappend -- command to append to a gzip file
-
-  Copyright (C) 2003 Mark Adler, all rights reserved
-  version 1.1, 4 Nov 2003
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the author be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Mark Adler    madler@alumni.caltech.edu
- */
-
-/*
- * Change history:
- *
- * 1.0  19 Oct 2003     - First version
- * 1.1   4 Nov 2003     - Expand and clarify some comments and notes
- *                      - Add version and copyright to help
- *                      - Send help to stdout instead of stderr
- *                      - Add some preemptive typecasts
- *                      - Add L to constants in lseek() calls
- *                      - Remove some debugging information in error messages
- *                      - Use new data_type definition for zlib 1.2.1
- *                      - Simplfy and unify file operations
- *                      - Finish off gzip file in gztack()
- *                      - Use deflatePrime() instead of adding empty blocks
- *                      - Keep gzip file clean on appended file read errors
- *                      - Use in-place rotate instead of auxiliary buffer
- *                        (Why you ask?  Because it was fun to write!)
- */
-
-/*
-   gzappend takes a gzip file and appends to it, compressing files from the
-   command line or data from stdin.  The gzip file is written to directly, to
-   avoid copying that file, in case it's large.  Note that this results in the
-   unfriendly behavior that if gzappend fails, the gzip file is corrupted.
-
-   This program was written to illustrate the use of the new Z_BLOCK option of
-   zlib 1.2.x's inflate() function.  This option returns from inflate() at each
-   block boundary to facilitate locating and modifying the last block bit at
-   the start of the final deflate block.  Also whether using Z_BLOCK or not,
-   another required feature of zlib 1.2.x is that inflate() now provides the
-   number of unusued bits in the last input byte used.  gzappend will not work
-   with versions of zlib earlier than 1.2.1.
-
-   gzappend first decompresses the gzip file internally, discarding all but
-   the last 32K of uncompressed data, and noting the location of the last block
-   bit and the number of unused bits in the last byte of the compressed data.
-   The gzip trailer containing the CRC-32 and length of the uncompressed data
-   is verified.  This trailer will be later overwritten.
-
-   Then the last block bit is cleared by seeking back in the file and rewriting
-   the byte that contains it.  Seeking forward, the last byte of the compressed
-   data is saved along with the number of unused bits to initialize deflate.
-
-   A deflate process is initialized, using the last 32K of the uncompressed
-   data from the gzip file to initialize the dictionary.  If the total
-   uncompressed data was less than 32K, then all of it is used to initialize
-   the dictionary.  The deflate output bit buffer is also initialized with the
-   last bits from the original deflate stream.  From here on, the data to
-   append is simply compressed using deflate, and written to the gzip file.
-   When that is complete, the new CRC-32 and uncompressed length are written
-   as the trailer of the gzip file.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include "zlib.h"
-
-#define local static
-#define LGCHUNK 14
-#define CHUNK (1U << LGCHUNK)
-#define DSIZE 32768U
-
-/* print an error message and terminate with extreme prejudice */
-local void bye(char *msg1, char *msg2)
-{
-    fprintf(stderr, "gzappend error: %s%s\n", msg1, msg2);
-    exit(1);
-}
-
-/* return the greatest common divisor of a and b using Euclid's algorithm,
-   modified to be fast when one argument much greater than the other, and
-   coded to avoid unnecessary swapping */
-local unsigned gcd(unsigned a, unsigned b)
-{
-    unsigned c;
-
-    while (a && b)
-        if (a > b) {
-            c = b;
-            while (a - c >= c)
-                c <<= 1;
-            a -= c;
-        }
-        else {
-            c = a;
-            while (b - c >= c)
-                c <<= 1;
-            b -= c;
-        }
-    return a + b;
-}
-
-/* rotate list[0..len-1] left by rot positions, in place */
-local void rotate(unsigned char *list, unsigned len, unsigned rot)
-{
-    unsigned char tmp;
-    unsigned cycles;
-    unsigned char *start, *last, *to, *from;
-
-    /* normalize rot and handle degenerate cases */
-    if (len < 2) return;
-    if (rot >= len) rot %= len;
-    if (rot == 0) return;
-
-    /* pointer to last entry in list */
-    last = list + (len - 1);
-
-    /* do simple left shift by one */
-    if (rot == 1) {
-        tmp = *list;
-        memcpy(list, list + 1, len - 1);
-        *last = tmp;
-        return;
-    }
-
-    /* do simple right shift by one */
-    if (rot == len - 1) {
-        tmp = *last;
-        memmove(list + 1, list, len - 1);
-        *list = tmp;
-        return;
-    }
-
-    /* otherwise do rotate as a set of cycles in place */
-    cycles = gcd(len, rot);             /* number of cycles */
-    do {
-        start = from = list + cycles;   /* start index is arbitrary */
-        tmp = *from;                    /* save entry to be overwritten */
-        for (;;) {
-            to = from;                  /* next step in cycle */
-            from += rot;                /* go right rot positions */
-            if (from > last) from -= len;   /* (pointer better not wrap) */
-            if (from == start) break;   /* all but one shifted */
-            *to = *from;                /* shift left */
-        }
-        *to = tmp;                      /* complete the circle */
-    } while (--cycles);
-}
-
-/* structure for gzip file read operations */
-typedef struct {
-    int fd;                     /* file descriptor */
-    int size;                   /* 1 << size is bytes in buf */
-    unsigned left;              /* bytes available at next */
-    unsigned char *buf;         /* buffer */
-    unsigned char *next;        /* next byte in buffer */
-    char *name;                 /* file name for error messages */
-} file;
-
-/* reload buffer */
-local int readin(file *in)
-{
-    int len;
-
-    len = read(in->fd, in->buf, 1 << in->size);
-    if (len == -1) bye("error reading ", in->name);
-    in->left = (unsigned)len;
-    in->next = in->buf;
-    return len;
-}
-
-/* read from file in, exit if end-of-file */
-local int readmore(file *in)
-{
-    if (readin(in) == 0) bye("unexpected end of ", in->name);
-    return 0;
-}
-
-#define read1(in) (in->left == 0 ? readmore(in) : 0, \
-                   in->left--, *(in->next)++)
-
-/* skip over n bytes of in */
-local void skip(file *in, unsigned n)
-{
-    unsigned bypass;
-
-    if (n > in->left) {
-        n -= in->left;
-        bypass = n & ~((1U << in->size) - 1);
-        if (bypass) {
-            if (lseek(in->fd, (off_t)bypass, SEEK_CUR) == -1)
-                bye("seeking ", in->name);
-            n -= bypass;
-        }
-        readmore(in);
-        if (n > in->left)
-            bye("unexpected end of ", in->name);
-    }
-    in->left -= n;
-    in->next += n;
-}
-
-/* read a four-byte unsigned integer, little-endian, from in */
-unsigned long read4(file *in)
-{
-    unsigned long val;
-
-    val = read1(in);
-    val += (unsigned)read1(in) << 8;
-    val += (unsigned long)read1(in) << 16;
-    val += (unsigned long)read1(in) << 24;
-    return val;
-}
-
-/* skip over gzip header */
-local void gzheader(file *in)
-{
-    int flags;
-    unsigned n;
-
-    if (read1(in) != 31 || read1(in) != 139) bye(in->name, " not a gzip file");
-    if (read1(in) != 8) bye("unknown compression method in", in->name);
-    flags = read1(in);
-    if (flags & 0xe0) bye("unknown header flags set in", in->name);
-    skip(in, 6);
-    if (flags & 4) {
-        n = read1(in);
-        n += (unsigned)(read1(in)) << 8;
-        skip(in, n);
-    }
-    if (flags & 8) while (read1(in) != 0) ;
-    if (flags & 16) while (read1(in) != 0) ;
-    if (flags & 2) skip(in, 2);
-}
-
-/* decompress gzip file "name", return strm with a deflate stream ready to
-   continue compression of the data in the gzip file, and return a file
-   descriptor pointing to where to write the compressed data -- the deflate
-   stream is initialized to compress using level "level" */
-local int gzscan(char *name, z_stream *strm, int level)
-{
-    int ret, lastbit, left, full;
-    unsigned have;
-    unsigned long crc, tot;
-    unsigned char *window;
-    off_t lastoff, end;
-    file gz;
-
-    /* open gzip file */
-    gz.name = name;
-    gz.fd = open(name, O_RDWR, 0);
-    if (gz.fd == -1) bye("cannot open ", name);
-    gz.buf = malloc(CHUNK);
-    if (gz.buf == NULL) bye("out of memory", "");
-    gz.size = LGCHUNK;
-    gz.left = 0;
-
-    /* skip gzip header */
-    gzheader(&gz);
-
-    /* prepare to decompress */
-    window = malloc(DSIZE);
-    if (window == NULL) bye("out of memory", "");
-    strm->zalloc = Z_NULL;
-    strm->zfree = Z_NULL;
-    strm->opaque = Z_NULL;
-    ret = inflateInit2(strm, -15);
-    if (ret != Z_OK) bye("out of memory", " or library mismatch");
-
-    /* decompress the deflate stream, saving append information */
-    lastbit = 0;
-    lastoff = lseek(gz.fd, 0L, SEEK_CUR) - gz.left;
-    left = 0;
-    strm->avail_in = gz.left;
-    strm->next_in = gz.next;
-    crc = crc32(0L, Z_NULL, 0);
-    have = full = 0;
-    do {
-        /* if needed, get more input */
-        if (strm->avail_in == 0) {
-            readmore(&gz);
-            strm->avail_in = gz.left;
-            strm->next_in = gz.next;
-        }
-
-        /* set up output to next available section of sliding window */
-        strm->avail_out = DSIZE - have;
-        strm->next_out = window + have;
-
-        /* inflate and check for errors */
-        ret = inflate(strm, Z_BLOCK);
-        if (ret == Z_STREAM_ERROR) bye("internal stream error!", "");
-        if (ret == Z_MEM_ERROR) bye("out of memory", "");
-        if (ret == Z_DATA_ERROR)
-            bye("invalid compressed data--format violated in", name);
-
-        /* update crc and sliding window pointer */
-        crc = crc32(crc, window + have, DSIZE - have - strm->avail_out);
-        if (strm->avail_out)
-            have = DSIZE - strm->avail_out;
-        else {
-            have = 0;
-            full = 1;
-        }
-
-        /* process end of block */
-        if (strm->data_type & 128) {
-            if (strm->data_type & 64)
-                left = strm->data_type & 0x1f;
-            else {
-                lastbit = strm->data_type & 0x1f;
-                lastoff = lseek(gz.fd, 0L, SEEK_CUR) - strm->avail_in;
-            }
-        }
-    } while (ret != Z_STREAM_END);
-    inflateEnd(strm);
-    gz.left = strm->avail_in;
-    gz.next = strm->next_in;
-
-    /* save the location of the end of the compressed data */
-    end = lseek(gz.fd, 0L, SEEK_CUR) - gz.left;
-
-    /* check gzip trailer and save total for deflate */
-    if (crc != read4(&gz))
-        bye("invalid compressed data--crc mismatch in ", name);
-    tot = strm->total_out;
-    if ((tot & 0xffffffffUL) != read4(&gz))
-        bye("invalid compressed data--length mismatch in", name);
-
-    /* if not at end of file, warn */
-    if (gz.left || readin(&gz))
-        fprintf(stderr,
-            "gzappend warning: junk at end of gzip file overwritten\n");
-
-    /* clear last block bit */
-    lseek(gz.fd, lastoff - (lastbit != 0), SEEK_SET);
-    if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name);
-    *gz.buf = (unsigned char)(*gz.buf ^ (1 << ((8 - lastbit) & 7)));
-    lseek(gz.fd, -1L, SEEK_CUR);
-    if (write(gz.fd, gz.buf, 1) != 1) bye("writing after seek to ", name);
-
-    /* if window wrapped, build dictionary from window by rotating */
-    if (full) {
-        rotate(window, DSIZE, have);
-        have = DSIZE;
-    }
-
-    /* set up deflate stream with window, crc, total_in, and leftover bits */
-    ret = deflateInit2(strm, level, Z_DEFLATED, -15, 8, Z_DEFAULT_STRATEGY);
-    if (ret != Z_OK) bye("out of memory", "");
-    deflateSetDictionary(strm, window, have);
-    strm->adler = crc;
-    strm->total_in = tot;
-    if (left) {
-        lseek(gz.fd, --end, SEEK_SET);
-        if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name);
-        deflatePrime(strm, 8 - left, *gz.buf);
-    }
-    lseek(gz.fd, end, SEEK_SET);
-
-    /* clean up and return */
-    free(window);
-    free(gz.buf);
-    return gz.fd;
-}
-
-/* append file "name" to gzip file gd using deflate stream strm -- if last
-   is true, then finish off the deflate stream at the end */
-local void gztack(char *name, int gd, z_stream *strm, int last)
-{
-    int fd, len, ret;
-    unsigned left;
-    unsigned char *in, *out;
-
-    /* open file to compress and append */
-    fd = 0;
-    if (name != NULL) {
-        fd = open(name, O_RDONLY, 0);
-        if (fd == -1)
-            fprintf(stderr, "gzappend warning: %s not found, skipping ...\n",
-                    name);
-    }
-
-    /* allocate buffers */
-    in = fd == -1 ? NULL : malloc(CHUNK);
-    out = malloc(CHUNK);
-    if (out == NULL) bye("out of memory", "");
-
-    /* compress input file and append to gzip file */
-    do {
-        /* get more input */
-        len = fd == -1 ? 0 : read(fd, in, CHUNK);
-        if (len == -1) {
-            fprintf(stderr,
-                    "gzappend warning: error reading %s, skipping rest ...\n",
-                    name);
-            len = 0;
-        }
-        strm->avail_in = (unsigned)len;
-        strm->next_in = in;
-        if (len) strm->adler = crc32(strm->adler, in, (unsigned)len);
-
-        /* compress and write all available output */
-        do {
-            strm->avail_out = CHUNK;
-            strm->next_out = out;
-            ret = deflate(strm, last && len == 0 ? Z_FINISH : Z_NO_FLUSH);
-            left = CHUNK - strm->avail_out;
-            while (left) {
-                len = write(gd, out + CHUNK - strm->avail_out - left, left);
-                if (len == -1) bye("writing gzip file", "");
-                left -= (unsigned)len;
-            }
-        } while (strm->avail_out == 0 && ret != Z_STREAM_END);
-    } while (len != 0);
-
-    /* write trailer after last entry */
-    if (last) {
-        deflateEnd(strm);
-        out[0] = (unsigned char)(strm->adler);
-        out[1] = (unsigned char)(strm->adler >> 8);
-        out[2] = (unsigned char)(strm->adler >> 16);
-        out[3] = (unsigned char)(strm->adler >> 24);
-        out[4] = (unsigned char)(strm->total_in);
-        out[5] = (unsigned char)(strm->total_in >> 8);
-        out[6] = (unsigned char)(strm->total_in >> 16);
-        out[7] = (unsigned char)(strm->total_in >> 24);
-        len = 8;
-        do {
-            ret = write(gd, out + 8 - len, len);
-            if (ret == -1) bye("writing gzip file", "");
-            len -= ret;
-        } while (len);
-        close(gd);
-    }
-
-    /* clean up and return */
-    free(out);
-    if (in != NULL) free(in);
-    if (fd > 0) close(fd);
-}
-
-/* process the compression level option if present, scan the gzip file, and
-   append the specified files, or append the data from stdin if no other file
-   names are provided on the command line -- the gzip file must be writable
-   and seekable */
-int main(int argc, char **argv)
-{
-    int gd, level;
-    z_stream strm;
-
-    /* ignore command name */
-    argv++;
-
-    /* provide usage if no arguments */
-    if (*argv == NULL) {
-        printf("gzappend 1.1 (4 Nov 2003) Copyright (C) 2003 Mark Adler\n");
-        printf(
-            "usage: gzappend [-level] file.gz [ addthis [ andthis ... ]]\n");
-        return 0;
-    }
-
-    /* set compression level */
-    level = Z_DEFAULT_COMPRESSION;
-    if (argv[0][0] == '-') {
-        if (argv[0][1] < '0' || argv[0][1] > '9' || argv[0][2] != 0)
-            bye("invalid compression level", "");
-        level = argv[0][1] - '0';
-        if (*++argv == NULL) bye("no gzip file name after options", "");
-    }
-
-    /* prepare to append to gzip file */
-    gd = gzscan(*argv++, &strm, level);
-
-    /* append files on command line, or from stdin if none */
-    if (*argv == NULL)
-        gztack(NULL, gd, &strm, 1);
-    else
-        do {
-            gztack(*argv, gd, &strm, argv[1] == NULL);
-        } while (*++argv != NULL);
-    return 0;
-}
diff --git a/source4/lib/zlib/examples/gzjoin.c b/source4/lib/zlib/examples/gzjoin.c
deleted file mode 100644
index 129347ce3c..0000000000
--- a/source4/lib/zlib/examples/gzjoin.c
+++ /dev/null
@@ -1,448 +0,0 @@
-/* gzjoin -- command to join gzip files into one gzip file
-
-  Copyright (C) 2004 Mark Adler, all rights reserved
-  version 1.0, 11 Dec 2004
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the author be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Mark Adler    madler@alumni.caltech.edu
- */
-
-/*
- * Change history:
- *
- * 1.0  11 Dec 2004     - First version
- * 1.1  12 Jun 2005     - Changed ssize_t to long for portability
- */
-
-/*
-   gzjoin takes one or more gzip files on the command line and writes out a
-   single gzip file that will uncompress to the concatenation of the
-   uncompressed data from the individual gzip files.  gzjoin does this without
-   having to recompress any of the data and without having to calculate a new
-   crc32 for the concatenated uncompressed data.  gzjoin does however have to
-   decompress all of the input data in order to find the bits in the compressed
-   data that need to be modified to concatenate the streams.
-
-   gzjoin does not do an integrity check on the input gzip files other than
-   checking the gzip header and decompressing the compressed data.  They are
-   otherwise assumed to be complete and correct.
-
-   Each joint between gzip files removes at least 18 bytes of previous trailer
-   and subsequent header, and inserts an average of about three bytes to the
-   compressed data in order to connect the streams.  The output gzip file
-   has a minimal ten-byte gzip header with no file name or modification time.
-
-   This program was written to illustrate the use of the Z_BLOCK option of
-   inflate() and the crc32_combine() function.  gzjoin will not compile with
-   versions of zlib earlier than 1.2.3.
- */
-
-#include <stdio.h>      /* fputs(), fprintf(), fwrite(), putc() */
-#include <stdlib.h>     /* exit(), malloc(), free() */
-#include <fcntl.h>      /* open() */
-#include <unistd.h>     /* close(), read(), lseek() */
-#include "zlib.h"
-    /* crc32(), crc32_combine(), inflateInit2(), inflate(), inflateEnd() */
-
-#define local static
-
-/* exit with an error (return a value to allow use in an expression) */
-local int bail(char *why1, char *why2)
-{
-    fprintf(stderr, "gzjoin error: %s%s, output incomplete\n", why1, why2);
-    exit(1);
-    return 0;
-}
-
-/* -- simple buffered file input with access to the buffer -- */
-
-#define CHUNK 32768         /* must be a power of two and fit in unsigned */
-
-/* bin buffered input file type */
-typedef struct {
-    char *name;             /* name of file for error messages */
-    int fd;                 /* file descriptor */
-    unsigned left;          /* bytes remaining at next */
-    unsigned char *next;    /* next byte to read */
-    unsigned char *buf;     /* allocated buffer of length CHUNK */
-} bin;
-
-/* close a buffered file and free allocated memory */
-local void bclose(bin *in)
-{
-    if (in != NULL) {
-        if (in->fd != -1)
-            close(in->fd);
-        if (in->buf != NULL)
-            free(in->buf);
-        free(in);
-    }
-}
-
-/* open a buffered file for input, return a pointer to type bin, or NULL on
-   failure */
-local bin *bopen(char *name)
-{
-    bin *in;
-
-    in = malloc(sizeof(bin));
-    if (in == NULL)
-        return NULL;
-    in->buf = malloc(CHUNK);
-    in->fd = open(name, O_RDONLY, 0);
-    if (in->buf == NULL || in->fd == -1) {
-        bclose(in);
-        return NULL;
-    }
-    in->left = 0;
-    in->next = in->buf;
-    in->name = name;
-    return in;
-}
-
-/* load buffer from file, return -1 on read error, 0 or 1 on success, with
-   1 indicating that end-of-file was reached */
-local int bload(bin *in)
-{
-    long len;
-
-    if (in == NULL)
-        return -1;
-    if (in->left != 0)
-        return 0;
-    in->next = in->buf;
-    do {
-        len = (long)read(in->fd, in->buf + in->left, CHUNK - in->left);
-        if (len < 0)
-            return -1;
-        in->left += (unsigned)len;
-    } while (len != 0 && in->left < CHUNK);
-    return len == 0 ? 1 : 0;
-}
-
-/* get a byte from the file, bail if end of file */
-#define bget(in) (in->left ? 0 : bload(in), \
-                  in->left ? (in->left--, *(in->next)++) : \
-                    bail("unexpected end of file on ", in->name))
-
-/* get a four-byte little-endian unsigned integer from file */
-local unsigned long bget4(bin *in)
-{
-    unsigned long val;
-
-    val = bget(in);
-    val += (unsigned long)(bget(in)) << 8;
-    val += (unsigned long)(bget(in)) << 16;
-    val += (unsigned long)(bget(in)) << 24;
-    return val;
-}
-
-/* skip bytes in file */
-local void bskip(bin *in, unsigned skip)
-{
-    /* check pointer */
-    if (in == NULL)
-        return;
-
-    /* easy case -- skip bytes in buffer */
-    if (skip <= in->left) {
-        in->left -= skip;
-        in->next += skip;
-        return;
-    }
-
-    /* skip what's in buffer, discard buffer contents */
-    skip -= in->left;
-    in->left = 0;
-
-    /* seek past multiples of CHUNK bytes */
-    if (skip > CHUNK) {
-        unsigned left;
-
-        left = skip & (CHUNK - 1);
-        if (left == 0) {
-            /* exact number of chunks: seek all the way minus one byte to check
-               for end-of-file with a read */
-            lseek(in->fd, skip - 1, SEEK_CUR);
-            if (read(in->fd, in->buf, 1) != 1)
-                bail("unexpected end of file on ", in->name);
-            return;
-        }
-
-        /* skip the integral chunks, update skip with remainder */
-        lseek(in->fd, skip - left, SEEK_CUR);
-        skip = left;
-    }
-
-    /* read more input and skip remainder */
-    bload(in);
-    if (skip > in->left)
-        bail("unexpected end of file on ", in->name);
-    in->left -= skip;
-    in->next += skip;
-}
-
-/* -- end of buffered input functions -- */
-
-/* skip the gzip header from file in */
-local void gzhead(bin *in)
-{
-    int flags;
-
-    /* verify gzip magic header and compression method */
-    if (bget(in) != 0x1f || bget(in) != 0x8b || bget(in) != 8)
-        bail(in->name, " is not a valid gzip file");
-
-    /* get and verify flags */
-    flags = bget(in);
-    if ((flags & 0xe0) != 0)
-        bail("unknown reserved bits set in ", in->name);
-
-    /* skip modification time, extra flags, and os */
-    bskip(in, 6);
-
-    /* skip extra field if present */
-    if (flags & 4) {
-        unsigned len;
-
-        len = bget(in);
-        len += (unsigned)(bget(in)) << 8;
-        bskip(in, len);
-    }
-
-    /* skip file name if present */
-    if (flags & 8)
-        while (bget(in) != 0)
-            ;
-
-    /* skip comment if present */
-    if (flags & 16)
-        while (bget(in) != 0)
-            ;
-
-    /* skip header crc if present */
-    if (flags & 2)
-        bskip(in, 2);
-}
-
-/* write a four-byte little-endian unsigned integer to out */
-local void put4(unsigned long val, FILE *out)
-{
-    putc(val & 0xff, out);
-    putc((val >> 8) & 0xff, out);
-    putc((val >> 16) & 0xff, out);
-    putc((val >> 24) & 0xff, out);
-}
-
-/* Load up zlib stream from buffered input, bail if end of file */
-local void zpull(z_streamp strm, bin *in)
-{
-    if (in->left == 0)
-        bload(in);
-    if (in->left == 0)
-        bail("unexpected end of file on ", in->name);
-    strm->avail_in = in->left;
-    strm->next_in = in->next;
-}
-
-/* Write header for gzip file to out and initialize trailer. */
-local void gzinit(unsigned long *crc, unsigned long *tot, FILE *out)
-{
-    fwrite("\x1f\x8b\x08\0\0\0\0\0\0\xff", 1, 10, out);
-    *crc = crc32(0L, Z_NULL, 0);
-    *tot = 0;
-}
-
-/* Copy the compressed data from name, zeroing the last block bit of the last
-   block if clr is true, and adding empty blocks as needed to get to a byte
-   boundary.  If clr is false, then the last block becomes the last block of
-   the output, and the gzip trailer is written.  crc and tot maintains the
-   crc and length (modulo 2^32) of the output for the trailer.  The resulting
-   gzip file is written to out.  gzinit() must be called before the first call
-   of gzcopy() to write the gzip header and to initialize crc and tot. */
-local void gzcopy(char *name, int clr, unsigned long *crc, unsigned long *tot,
-                  FILE *out)
-{
-    int ret;                /* return value from zlib functions */
-    int pos;                /* where the "last block" bit is in byte */
-    int last;               /* true if processing the last block */
-    bin *in;                /* buffered input file */
-    unsigned char *start;   /* start of compressed data in buffer */
-    unsigned char *junk;    /* buffer for uncompressed data -- discarded */
-    z_off_t len;            /* length of uncompressed data (support > 4 GB) */
-    z_stream strm;          /* zlib inflate stream */
-
-    /* open gzip file and skip header */
-    in = bopen(name);
-    if (in == NULL)
-        bail("could not open ", name);
-    gzhead(in);
-
-    /* allocate buffer for uncompressed data and initialize raw inflate
-       stream */
-    junk = malloc(CHUNK);
-    strm.zalloc = Z_NULL;
-    strm.zfree = Z_NULL;
-    strm.opaque = Z_NULL;
-    strm.avail_in = 0;
-    strm.next_in = Z_NULL;
-    ret = inflateInit2(&strm, -15);
-    if (junk == NULL || ret != Z_OK)
-        bail("out of memory", "");
-
-    /* inflate and copy compressed data, clear last-block bit if requested */
-    len = 0;
-    zpull(&strm, in);
-    start = strm.next_in;
-    last = start[0] & 1;
-    if (last && clr)
-        start[0] &= ~1;
-    strm.avail_out = 0;
-    for (;;) {
-        /* if input used and output done, write used input and get more */
-        if (strm.avail_in == 0 && strm.avail_out != 0) {
-            fwrite(start, 1, strm.next_in - start, out);
-            start = in->buf;
-            in->left = 0;
-            zpull(&strm, in);
-        }
-
-        /* decompress -- return early when end-of-block reached */
-        strm.avail_out = CHUNK;
-        strm.next_out = junk;
-        ret = inflate(&strm, Z_BLOCK);
-        switch (ret) {
-        case Z_MEM_ERROR:
-            bail("out of memory", "");
-        case Z_DATA_ERROR:
-            bail("invalid compressed data in ", in->name);
-        }
-
-        /* update length of uncompressed data */
-        len += CHUNK - strm.avail_out;
-
-        /* check for block boundary (only get this when block copied out) */
-        if (strm.data_type & 128) {
-            /* if that was the last block, then done */
-            if (last)
-                break;
-
-            /* number of unused bits in last byte */
-            pos = strm.data_type & 7;
-
-            /* find the next last-block bit */
-            if (pos != 0) {
-                /* next last-block bit is in last used byte */
-                pos = 0x100 >> pos;
-                last = strm.next_in[-1] & pos;
-                if (last && clr)
-                    strm.next_in[-1] &= ~pos;
-            }
-            else {
-                /* next last-block bit is in next unused byte */
-                if (strm.avail_in == 0) {
-                    /* don't have that byte yet -- get it */
-                    fwrite(start, 1, strm.next_in - start, out);
-                    start = in->buf;
-                    in->left = 0;
-                    zpull(&strm, in);
-                }
-                last = strm.next_in[0] & 1;
-                if (last && clr)
-                    strm.next_in[0] &= ~1;
-            }
-        }
-    }
-
-    /* update buffer with unused input */
-    in->left = strm.avail_in;
-    in->next = strm.next_in;
-
-    /* copy used input, write empty blocks to get to byte boundary */
-    pos = strm.data_type & 7;
-    fwrite(start, 1, in->next - start - 1, out);
-    last = in->next[-1];
-    if (pos == 0 || !clr)
-        /* already at byte boundary, or last file: write last byte */
-        putc(last, out);
-    else {
-        /* append empty blocks to last byte */
-        last &= ((0x100 >> pos) - 1);       /* assure unused bits are zero */
-        if (pos & 1) {
-            /* odd -- append an empty stored block */
-            putc(last, out);
-            if (pos == 1)
-                putc(0, out);               /* two more bits in block header */
-            fwrite("\0\0\xff\xff", 1, 4, out);
-        }
-        else {
-            /* even -- append 1, 2, or 3 empty fixed blocks */
-            switch (pos) {
-            case 6:
-                putc(last | 8, out);
-                last = 0;
-            case 4:
-                putc(last | 0x20, out);
-                last = 0;
-            case 2:
-                putc(last | 0x80, out);
-                putc(0, out);
-            }
-        }
-    }
-
-    /* update crc and tot */
-    *crc = crc32_combine(*crc, bget4(in), len);
-    *tot += (unsigned long)len;
-
-    /* clean up */
-    inflateEnd(&strm);
-    free(junk);
-    bclose(in);
-
-    /* write trailer if this is the last gzip file */
-    if (!clr) {
-        put4(*crc, out);
-        put4(*tot, out);
-    }
-}
-
-/* join the gzip files on the command line, write result to stdout */
-int main(int argc, char **argv)
-{
-    unsigned long crc, tot;     /* running crc and total uncompressed length */
-
-    /* skip command name */
-    argc--;
-    argv++;
-
-    /* show usage if no arguments */
-    if (argc == 0) {
-        fputs("gzjoin usage: gzjoin f1.gz [f2.gz [f3.gz ...]] > fjoin.gz\n",
-              stderr);
-        return 0;
-    }
-
-    /* join gzip files on command line and write to stdout */
-    gzinit(&crc, &tot, stdout);
-    while (argc--)
-        gzcopy(*argv++, argc, &crc, &tot, stdout);
-
-    /* done */
-    return 0;
-}
diff --git a/source4/lib/zlib/examples/gzlog.c b/source4/lib/zlib/examples/gzlog.c
deleted file mode 100644
index f71f817c8b..0000000000
--- a/source4/lib/zlib/examples/gzlog.c
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- * gzlog.c
- * Copyright (C) 2004 Mark Adler
- * For conditions of distribution and use, see copyright notice in gzlog.h
- * version 1.0, 26 Nov 2004
- *
- */
-
-#include <string.h>             /* memcmp() */
-#include <stdlib.h>             /* malloc(), free(), NULL */
-#include <sys/types.h>          /* size_t, off_t */
-#include <unistd.h>             /* read(), close(), sleep(), ftruncate(), */
-                                /* lseek() */
-#include <fcntl.h>              /* open() */
-#include <sys/file.h>           /* flock() */
-#include "zlib.h"               /* deflateInit2(), deflate(), deflateEnd() */
-
-#include "gzlog.h"              /* interface */
-#define local static
-
-/* log object structure */
-typedef struct {
-    int id;                 /* object identifier */
-    int fd;                 /* log file descriptor */
-    off_t extra;            /* offset of extra "ap" subfield */
-    off_t mark_off;         /* offset of marked data */
-    off_t last_off;         /* offset of last block */
-    unsigned long crc;      /* uncompressed crc */
-    unsigned long len;      /* uncompressed length (modulo 2^32) */
-    unsigned stored;        /* length of current stored block */
-} gz_log;
-
-#define GZLOGID 19334       /* gz_log object identifier */
-
-#define LOCK_RETRY 1            /* retry lock once a second */
-#define LOCK_PATIENCE 1200      /* try about twenty minutes before forcing */
-
-/* acquire a lock on a file */
-local int lock(int fd)
-{
-    int patience;
-
-    /* try to lock every LOCK_RETRY seconds for LOCK_PATIENCE seconds */
-    patience = LOCK_PATIENCE;
-    do {
-        if (flock(fd, LOCK_EX + LOCK_NB) == 0)
-            return 0;
-        (void)sleep(LOCK_RETRY);
-        patience -= LOCK_RETRY;
-    } while (patience > 0);
-
-    /* we've run out of patience -- give up */
-    return -1;
-}
-
-/* release lock */
-local void unlock(int fd)
-{
-    (void)flock(fd, LOCK_UN);
-}
-
-/* release a log object */
-local void log_clean(gz_log *log)
-{
-    unlock(log->fd);
-    (void)close(log->fd);
-    free(log);
-}
-
-/* read an unsigned long from a byte buffer little-endian */
-local unsigned long make_ulg(unsigned char *buf)
-{
-    int n;
-    unsigned long val;
-
-    val = (unsigned long)(*buf++);
-    for (n = 8; n < 32; n += 8)
-        val += (unsigned long)(*buf++) << n;
-    return val;
-}
-
-/* read an off_t from a byte buffer little-endian */
-local off_t make_off(unsigned char *buf)
-{
-    int n;
-    off_t val;
-
-    val = (off_t)(*buf++);
-    for (n = 8; n < 64; n += 8)
-        val += (off_t)(*buf++) << n;
-    return val;
-}
-
-/* write an unsigned long little-endian to byte buffer */
-local void dice_ulg(unsigned long val, unsigned char *buf)
-{
-    int n;
-
-    for (n = 0; n < 4; n++) {
-        *buf++ = val & 0xff;
-        val >>= 8;
-    }
-}
-
-/* write an off_t little-endian to byte buffer */
-local void dice_off(off_t val, unsigned char *buf)
-{
-    int n;
-
-    for (n = 0; n < 8; n++) {
-        *buf++ = val & 0xff;
-        val >>= 8;
-    }
-}
-
-/* initial, empty gzip file for appending */
-local char empty_gz[] = {
-    0x1f, 0x8b,                 /* magic gzip id */
-    8,                          /* compression method is deflate */
-    4,                          /* there is an extra field */
-    0, 0, 0, 0,                 /* no modification time provided */
-    0, 0xff,                    /* no extra flags, no OS */
-    20, 0, 'a', 'p', 16, 0,     /* extra field with "ap" subfield */
-    32, 0, 0, 0, 0, 0, 0, 0,    /* offset of uncompressed data */
-    32, 0, 0, 0, 0, 0, 0, 0,    /* offset of last block */
-    1, 0, 0, 0xff, 0xff,        /* empty stored block (last) */
-    0, 0, 0, 0,                 /* crc */
-    0, 0, 0, 0                  /* uncompressed length */
-};
-
-/* initialize a log object with locking */
-void *gzlog_open(char *path)
-{
-    unsigned xlen;
-    unsigned char temp[20];
-    unsigned sub_len;
-    int good;
-    gz_log *log;
-
-    /* allocate log structure */
-    log = malloc(sizeof(gz_log));
-    if (log == NULL)
-        return NULL;
-    log->id = GZLOGID;
-
-    /* open file, creating it if necessary, and locking it */
-    log->fd = open(path, O_RDWR | O_CREAT, 0600);
-    if (log->fd < 0) {
-        free(log);
-        return NULL;
-    }
-    if (lock(log->fd)) {
-        close(log->fd);
-        free(log);
-        return NULL;
-    }
-
-    /* if file is empty, write new gzip stream */
-    if (lseek(log->fd, 0, SEEK_END) == 0) {
-        if (write(log->fd, empty_gz, sizeof(empty_gz)) != sizeof(empty_gz)) {
-            log_clean(log);
-            return NULL;
-        }
-    }
-
-    /* check gzip header */
-    (void)lseek(log->fd, 0, SEEK_SET);
-    if (read(log->fd, temp, 12) != 12 || temp[0] != 0x1f ||
-        temp[1] != 0x8b || temp[2] != 8 || (temp[3] & 4) == 0) {
-        log_clean(log);
-        return NULL;
-    }
-
-    /* process extra field to find "ap" sub-field */
-    xlen = temp[10] + (temp[11] << 8);
-    good = 0;
-    while (xlen) {
-        if (xlen < 4 || read(log->fd, temp, 4) != 4)
-            break;
-        sub_len = temp[2];
-        sub_len += temp[3] << 8;
-        xlen -= 4;
-        if (memcmp(temp, "ap", 2) == 0 && sub_len == 16) {
-            good = 1;
-            break;
-        }
-        if (xlen < sub_len)
-            break;
-        (void)lseek(log->fd, sub_len, SEEK_CUR);
-        xlen -= sub_len;
-    }
-    if (!good) {
-        log_clean(log);
-        return NULL;
-    }
-
-    /* read in "ap" sub-field */
-    log->extra = lseek(log->fd, 0, SEEK_CUR);
-    if (read(log->fd, temp, 16) != 16) {
-        log_clean(log);
-        return NULL;
-    }
-    log->mark_off = make_off(temp);
-    log->last_off = make_off(temp + 8);
-
-    /* get crc, length of gzip file */
-    (void)lseek(log->fd, log->last_off, SEEK_SET);
-    if (read(log->fd, temp, 13) != 13 ||
-        memcmp(temp, "\001\000\000\377\377", 5) != 0) {
-        log_clean(log);
-        return NULL;
-    }
-    log->crc = make_ulg(temp + 5);
-    log->len = make_ulg(temp + 9);
-
-    /* set up to write over empty last block */
-    (void)lseek(log->fd, log->last_off + 5, SEEK_SET);
-    log->stored = 0;
-    return (void *)log;
-}
-
-/* maximum amount to put in a stored block before starting a new one */
-#define MAX_BLOCK 16384
-
-/* write a block to a log object */
-int gzlog_write(void *obj, char *data, size_t len)
-{
-    size_t some;
-    unsigned char temp[5];
-    gz_log *log;
-
-    /* check object */
-    log = (gz_log *)obj;
-    if (log == NULL || log->id != GZLOGID)
-        return 1;
-
-    /* write stored blocks until all of the input is written */
-    do {
-        some = MAX_BLOCK - log->stored;
-        if (some > len)
-            some = len;
-        if (write(log->fd, data, some) != some)
-            return 1;
-        log->crc = crc32(log->crc, data, some);
-        log->len += some;
-        len -= some;
-        data += some;
-        log->stored += some;
-
-        /* if the stored block is full, end it and start another */
-        if (log->stored == MAX_BLOCK) {
-            (void)lseek(log->fd, log->last_off, SEEK_SET);
-            temp[0] = 0;
-            dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16),
-                     temp + 1);
-            if (write(log->fd, temp, 5) != 5)
-                return 1;
-            log->last_off = lseek(log->fd, log->stored, SEEK_CUR);
-            (void)lseek(log->fd, 5, SEEK_CUR);
-            log->stored = 0;
-        }
-    } while (len);
-    return 0;
-}
-
-/* recompress the remaining stored deflate data in place */
-local int recomp(gz_log *log)
-{
-    z_stream strm;
-    size_t len, max;
-    unsigned char *in;
-    unsigned char *out;
-    unsigned char temp[16];
-
-    /* allocate space and read it all in (it's around 1 MB) */
-    len = log->last_off - log->mark_off;
-    max = len + (len >> 12) + (len >> 14) + 11;
-    out = malloc(max);
-    if (out == NULL)
-        return 1;
-    in = malloc(len);
-    if (in == NULL) {
-        free(out);
-        return 1;
-    }
-    (void)lseek(log->fd, log->mark_off, SEEK_SET);
-    if (read(log->fd, in, len) != len) {
-        free(in);
-        free(out);
-        return 1;
-    }
-
-    /* recompress in memory, decoding stored data as we go */
-    /* note: this assumes that unsigned is four bytes or more */
-    /*       consider not making that assumption */
-    strm.zalloc = Z_NULL;
-    strm.zfree = Z_NULL;
-    strm.opaque = Z_NULL;
-    if (deflateInit2(&strm, Z_BEST_COMPRESSION, Z_DEFLATED, -15, 8,
-        Z_DEFAULT_STRATEGY) != Z_OK) {
-        free(in);
-        free(out);
-        return 1;
-    }
-    strm.next_in = in;
-    strm.avail_out = max;
-    strm.next_out = out;
-    while (len >= 5) {
-        if (strm.next_in[0] != 0)
-            break;
-        strm.avail_in = strm.next_in[1] + (strm.next_in[2] << 8);
-        strm.next_in += 5;
-        len -= 5;
-        if (strm.avail_in != 0) {
-            if (len < strm.avail_in)
-                break;
-            len -= strm.avail_in;
-            (void)deflate(&strm, Z_NO_FLUSH);
-            if (strm.avail_in != 0 || strm.avail_out == 0)
-                break;
-        }
-    }
-    (void)deflate(&strm, Z_SYNC_FLUSH);
-    (void)deflateEnd(&strm);
-    free(in);
-    if (len != 0 || strm.avail_out == 0) {
-        free(out);
-        return 1;
-    }
-
-    /* overwrite stored data with compressed data */
-    (void)lseek(log->fd, log->mark_off, SEEK_SET);
-    len = max - strm.avail_out;
-    if (write(log->fd, out, len) != len) {
-        free(out);
-        return 1;
-    }
-    free(out);
-
-    /* write last empty block, crc, and length */
-    log->mark_off = log->last_off = lseek(log->fd, 0, SEEK_CUR);
-    temp[0] = 1;
-    dice_ulg(0xffffL << 16, temp + 1);
-    dice_ulg(log->crc, temp + 5);
-    dice_ulg(log->len, temp + 9);
-    if (write(log->fd, temp, 13) != 13)
-        return 1;
-
-    /* truncate file to discard remaining stored data and old trailer */
-    ftruncate(log->fd, lseek(log->fd, 0, SEEK_CUR));
-
-    /* update extra field to point to new last empty block */
-    (void)lseek(log->fd, log->extra, SEEK_SET);
-    dice_off(log->mark_off, temp);
-    dice_off(log->last_off, temp + 8);
-    if (write(log->fd, temp, 16) != 16)
-        return 1;
-    return 0;
-}
-
-/* maximum accumulation of stored blocks before compressing */
-#define MAX_STORED 1048576
-
-/* close log object */
-int gzlog_close(void *obj)
-{
-    unsigned char temp[8];
-    gz_log *log;
-
-    /* check object */
-    log = (gz_log *)obj;
-    if (log == NULL || log->id != GZLOGID)
-        return 1;
-
-    /* go to start of most recent block being written */
-    (void)lseek(log->fd, log->last_off, SEEK_SET);
-
-    /* if some stuff was put there, update block */
-    if (log->stored) {
-        temp[0] = 0;
-        dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16),
-                 temp + 1);
-        if (write(log->fd, temp, 5) != 5)
-            return 1;
-        log->last_off = lseek(log->fd, log->stored, SEEK_CUR);
-    }
-
-    /* write last block (empty) */
-    if (write(log->fd, "\001\000\000\377\377", 5) != 5)
-        return 1;
-
-    /* write updated crc and uncompressed length */
-    dice_ulg(log->crc, temp);
-    dice_ulg(log->len, temp + 4);
-    if (write(log->fd, temp, 8) != 8)
-        return 1;
-
-    /* put offset of that last block in gzip extra block */
-    (void)lseek(log->fd, log->extra + 8, SEEK_SET);
-    dice_off(log->last_off, temp);
-    if (write(log->fd, temp, 8) != 8)
-        return 1;
-
-    /* if more than 1 MB stored, then time to compress it */
-    if (log->last_off - log->mark_off > MAX_STORED) {
-        if (recomp(log))
-            return 1;
-    }
-
-    /* unlock and close file */
-    log_clean(log);
-    return 0;
-}
diff --git a/source4/lib/zlib/examples/gzlog.h b/source4/lib/zlib/examples/gzlog.h
deleted file mode 100644
index a800bd5391..0000000000
--- a/source4/lib/zlib/examples/gzlog.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* gzlog.h
-  Copyright (C) 2004 Mark Adler, all rights reserved
-  version 1.0, 26 Nov 2004
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the author be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Mark Adler    madler@alumni.caltech.edu
- */
-
-/*
-   The gzlog object allows writing short messages to a gzipped log file,
-   opening the log file locked for small bursts, and then closing it.  The log
-   object works by appending stored data to the gzip file until 1 MB has been
-   accumulated.  At that time, the stored data is compressed, and replaces the
-   uncompressed data in the file.  The log file is truncated to its new size at
-   that time.  After closing, the log file is always valid gzip file that can
-   decompressed to recover what was written.
-
-   A gzip header "extra" field contains two file offsets for appending.  The
-   first points to just after the last compressed data.  The second points to
-   the last stored block in the deflate stream, which is empty.  All of the
-   data between those pointers is uncompressed.
- */
-
-/* Open a gzlog object, creating the log file if it does not exist.  Return
-   NULL on error.  Note that gzlog_open() could take a long time to return if
-   there is difficulty in locking the file. */
-void *gzlog_open(char *path);
-
-/* Write to a gzlog object.  Return non-zero on error.  This function will
-   simply write data to the file uncompressed.  Compression of the data
-   will not occur until gzlog_close() is called.  It is expected that
-   gzlog_write() is used for a short message, and then gzlog_close() is
-   called.  If a large amount of data is to be written, then the application
-   should write no more than 1 MB at a time with gzlog_write() before
-   calling gzlog_close() and then gzlog_open() again. */
-int gzlog_write(void *log, char *data, size_t len);
-
-/* Close a gzlog object.  Return non-zero on error.  The log file is locked
-   until this function is called.  This function will compress stored data
-   at the end of the gzip file if at least 1 MB has been accumulated.  Note
-   that the file will not be a valid gzip file until this function completes.
- */
-int gzlog_close(void *log);
diff --git a/source4/lib/zlib/examples/zlib_how.html b/source4/lib/zlib/examples/zlib_how.html
deleted file mode 100644
index 40998dbf08..0000000000
--- a/source4/lib/zlib/examples/zlib_how.html
+++ /dev/null
@@ -1,523 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
-  "http://www.w3.org/TR/REC-html40/loose.dtd">
-<html>
-<head>
-<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
-<title>zlib Usage Example</title>
-<!--  Copyright (c) 2004 Mark Adler.  -->
-</head>
-<body bgcolor="#FFFFFF" text="#000000" link="#0000FF" vlink="#00A000">
-<h2 align="center"> zlib Usage Example </h2>
-We often get questions about how the <tt>deflate()</tt> and <tt>inflate()</tt> functions should be used.
-Users wonder when they should provide more input, when they should use more output,
-what to do with a <tt>Z_BUF_ERROR</tt>, how to make sure the process terminates properly, and
-so on.  So for those who have read <tt>zlib.h</tt> (a few times), and
-would like further edification, below is an annotated example in C of simple routines to compress and decompress
-from an input file to an output file using <tt>deflate()</tt> and <tt>inflate()</tt> respectively.  The
-annotations are interspersed between lines of the code.  So please read between the lines.
-We hope this helps explain some of the intricacies of <em>zlib</em>.
-<p>
-Without further adieu, here is the program <a href="zpipe.c"><tt>zpipe.c</tt></a>:
-<pre><b>
-/* zpipe.c: example of proper use of zlib's inflate() and deflate()
-   Not copyrighted -- provided to the public domain
-   Version 1.2  9 November 2004  Mark Adler */
-
-/* Version history:
-   1.0  30 Oct 2004  First version
-   1.1   8 Nov 2004  Add void casting for unused return values
-                     Use switch statement for inflate() return values
-   1.2   9 Nov 2004  Add assertions to document zlib guarantees
- */
-</b></pre><!-- -->
-We now include the header files for the required definitions.  From
-<tt>stdio.h</tt> we use <tt>fopen()</tt>, <tt>fread()</tt>, <tt>fwrite()</tt>,
-<tt>feof()</tt>, <tt>ferror()</tt>, and <tt>fclose()</tt> for file i/o, and
-<tt>fputs()</tt> for error messages.  From <tt>string.h</tt> we use
-<tt>strcmp()</tt> for command line argument processing.
-From <tt>assert.h</tt> we use the <tt>assert()</tt> macro.
-From <tt>zlib.h</tt>
-we use the basic compression functions <tt>deflateInit()</tt>,
-<tt>deflate()</tt>, and <tt>deflateEnd()</tt>, and the basic decompression
-functions <tt>inflateInit()</tt>, <tt>inflate()</tt>, and
-<tt>inflateEnd()</tt>.
-<pre><b>
-#include &lt;stdio.h&gt;
-#include &lt;string.h&gt;
-#include &lt;assert.h&gt;
-#include "zlib.h"
-</b></pre><!-- -->
-<tt>CHUNK</tt> is simply the buffer size for feeding data to and pulling data
-from the <em>zlib</em> routines.  Larger buffer sizes would be more efficient,
-especially for <tt>inflate()</tt>.  If the memory is available, buffers sizes
-on the order of 128K or 256K bytes should be used.
-<pre><b>
-#define CHUNK 16384
-</b></pre><!-- -->
-The <tt>def()</tt> routine compresses data from an input file to an output file.  The output data
-will be in the <em>zlib</em> format, which is different from the <em>gzip</em> or <em>zip</em>
-formats.  The <em>zlib</em> format has a very small header of only two bytes to identify it as
-a <em>zlib</em> stream and to provide decoding information, and a four-byte trailer with a fast
-check value to verify the integrity of the uncompressed data after decoding.
-<pre><b>
-/* Compress from file source to file dest until EOF on source.
-   def() returns Z_OK on success, Z_MEM_ERROR if memory could not be
-   allocated for processing, Z_STREAM_ERROR if an invalid compression
-   level is supplied, Z_VERSION_ERROR if the version of zlib.h and the
-   version of the library linked do not match, or Z_ERRNO if there is
-   an error reading or writing the files. */
-int def(FILE *source, FILE *dest, int level)
-{
-</b></pre>
-Here are the local variables for <tt>def()</tt>.  <tt>ret</tt> will be used for <em>zlib</em>
-return codes.  <tt>flush</tt> will keep track of the current flushing state for <tt>deflate()</tt>,
-which is either no flushing, or flush to completion after the end of the input file is reached.
-<tt>have</tt> is the amount of data returned from <tt>deflate()</tt>.  The <tt>strm</tt> structure
-is used to pass information to and from the <em>zlib</em> routines, and to maintain the
-<tt>deflate()</tt> state.  <tt>in</tt> and <tt>out</tt> are the input and output buffers for
-<tt>deflate()</tt>.
-<pre><b>
-    int ret, flush;
-    unsigned have;
-    z_stream strm;
-    char in[CHUNK];
-    char out[CHUNK];
-</b></pre><!-- -->
-The first thing we do is to initialize the <em>zlib</em> state for compression using
-<tt>deflateInit()</tt>.  This must be done before the first use of <tt>deflate()</tt>.
-The <tt>zalloc</tt>, <tt>zfree</tt>, and <tt>opaque</tt> fields in the <tt>strm</tt>
-structure must be initialized before calling <tt>deflateInit()</tt>.  Here they are
-set to the <em>zlib</em> constant <tt>Z_NULL</tt> to request that <em>zlib</em> use
-the default memory allocation routines.  An application may also choose to provide
-custom memory allocation routines here.  <tt>deflateInit()</tt> will allocate on the
-order of 256K bytes for the internal state.
-(See <a href="zlib_tech.html"><em>zlib Technical Details</em></a>.)
-<p>
-<tt>deflateInit()</tt> is called with a pointer to the structure to be initialized and
-the compression level, which is an integer in the range of -1 to 9.  Lower compression
-levels result in faster execution, but less compression.  Higher levels result in
-greater compression, but slower execution.  The <em>zlib</em> constant Z_DEFAULT_COMPRESSION,
-equal to -1,
-provides a good compromise between compression and speed and is equivalent to level 6.
-Level 0 actually does no compression at all, and in fact expands the data slightly to produce
-the <em>zlib</em> format (it is not a byte-for-byte copy of the input).
-More advanced applications of <em>zlib</em>
-may use <tt>deflateInit2()</tt> here instead.  Such an application may want to reduce how
-much memory will be used, at some price in compression.  Or it may need to request a
-<em>gzip</em> header and trailer instead of a <em>zlib</em> header and trailer, or raw
-encoding with no header or trailer at all.
-<p>
-We must check the return value of <tt>deflateInit()</tt> against the <em>zlib</em> constant
-<tt>Z_OK</tt> to make sure that it was able to
-allocate memory for the internal state, and that the provided arguments were valid.
-<tt>deflateInit()</tt> will also check that the version of <em>zlib</em> that the <tt>zlib.h</tt>
-file came from matches the version of <em>zlib</em> actually linked with the program.  This
-is especially important for environments in which <em>zlib</em> is a shared library.
-<p>
-Note that an application can initialize multiple, independent <em>zlib</em> streams, which can
-operate in parallel.  The state information maintained in the structure allows the <em>zlib</em>
-routines to be reentrant.
-<pre><b>
-    /* allocate deflate state */
-    strm.zalloc = Z_NULL;
-    strm.zfree = Z_NULL;
-    strm.opaque = Z_NULL;
-    ret = deflateInit(&amp;strm, level);
-    if (ret != Z_OK)
-        return ret;
-</b></pre><!-- -->
-With the pleasantries out of the way, now we can get down to business.  The outer <tt>do</tt>-loop
-reads all of the input file and exits at the bottom of the loop once end-of-file is reached.
-This loop contains the only call of <tt>deflate()</tt>.  So we must make sure that all of the
-input data has been processed and that all of the output data has been generated and consumed
-before we fall out of the loop at the bottom.
-<pre><b>
-    /* compress until end of file */
-    do {
-</b></pre>
-We start off by reading data from the input file.  The number of bytes read is put directly
-into <tt>avail_in</tt>, and a pointer to those bytes is put into <tt>next_in</tt>.  We also
-check to see if end-of-file on the input has been reached.  If we are at the end of file, then <tt>flush</tt> is set to the
-<em>zlib</em> constant <tt>Z_FINISH</tt>, which is later passed to <tt>deflate()</tt> to
-indicate that this is the last chunk of input data to compress.  We need to use <tt>feof()</tt>
-to check for end-of-file as opposed to seeing if fewer than <tt>CHUNK</tt> bytes have been read.  The
-reason is that if the input file length is an exact multiple of <tt>CHUNK</tt>, we will miss
-the fact that we got to the end-of-file, and not know to tell <tt>deflate()</tt> to finish
-up the compressed stream.  If we are not yet at the end of the input, then the <em>zlib</em>
-constant <tt>Z_NO_FLUSH</tt> will be passed to <tt>deflate</tt> to indicate that we are still
-in the middle of the uncompressed data.
-<p>
-If there is an error in reading from the input file, the process is aborted with
-<tt>deflateEnd()</tt> being called to free the allocated <em>zlib</em> state before returning
-the error.  We wouldn't want a memory leak, now would we?  <tt>deflateEnd()</tt> can be called
-at any time after the state has been initialized.  Once that's done, <tt>deflateInit()</tt> (or
-<tt>deflateInit2()</tt>) would have to be called to start a new compression process.  There is
-no point here in checking the <tt>deflateEnd()</tt> return code.  The deallocation can't fail.
-<pre><b>
-        strm.avail_in = fread(in, 1, CHUNK, source);
-        if (ferror(source)) {
-            (void)deflateEnd(&amp;strm);
-            return Z_ERRNO;
-        }
-        flush = feof(source) ? Z_FINISH : Z_NO_FLUSH;
-        strm.next_in = in;
-</b></pre><!-- -->
-The inner <tt>do</tt>-loop passes our chunk of input data to <tt>deflate()</tt>, and then
-keeps calling <tt>deflate()</tt> until it is done producing output.  Once there is no more
-new output, <tt>deflate()</tt> is guaranteed to have consumed all of the input, i.e.,
-<tt>avail_in</tt> will be zero.
-<pre><b>
-        /* run deflate() on input until output buffer not full, finish
-           compression if all of source has been read in */
-        do {
-</b></pre>
-Output space is provided to <tt>deflate()</tt> by setting <tt>avail_out</tt> to the number
-of available output bytes and <tt>next_out</tt> to a pointer to that space.
-<pre><b>
-            strm.avail_out = CHUNK;
-            strm.next_out = out;
-</b></pre>
-Now we call the compression engine itself, <tt>deflate()</tt>.  It takes as many of the
-<tt>avail_in</tt> bytes at <tt>next_in</tt> as it can process, and writes as many as
-<tt>avail_out</tt> bytes to <tt>next_out</tt>.  Those counters and pointers are then
-updated past the input data consumed and the output data written.  It is the amount of
-output space available that may limit how much input is consumed.
-Hence the inner loop to make sure that
-all of the input is consumed by providing more output space each time.  Since <tt>avail_in</tt>
-and <tt>next_in</tt> are updated by <tt>deflate()</tt>, we don't have to mess with those
-between <tt>deflate()</tt> calls until it's all used up.
-<p>
-The parameters to <tt>deflate()</tt> are a pointer to the <tt>strm</tt> structure containing
-the input and output information and the internal compression engine state, and a parameter
-indicating whether and how to flush data to the output.  Normally <tt>deflate</tt> will consume
-several K bytes of input data before producing any output (except for the header), in order
-to accumulate statistics on the data for optimum compression.  It will then put out a burst of
-compressed data, and proceed to consume more input before the next burst.  Eventually,
-<tt>deflate()</tt>
-must be told to terminate the stream, complete the compression with provided input data, and
-write out the trailer check value.  <tt>deflate()</tt> will continue to compress normally as long
-as the flush parameter is <tt>Z_NO_FLUSH</tt>.  Once the <tt>Z_FINISH</tt> parameter is provided,
-<tt>deflate()</tt> will begin to complete the compressed output stream.  However depending on how
-much output space is provided, <tt>deflate()</tt> may have to be called several times until it
-has provided the complete compressed stream, even after it has consumed all of the input.  The flush
-parameter must continue to be <tt>Z_FINISH</tt> for those subsequent calls.
-<p>
-There are other values of the flush parameter that are used in more advanced applications.  You can
-force <tt>deflate()</tt> to produce a burst of output that encodes all of the input data provided
-so far, even if it wouldn't have otherwise, for example to control data latency on a link with
-compressed data.  You can also ask that <tt>deflate()</tt> do that as well as erase any history up to
-that point so that what follows can be decompressed independently, for example for random access
-applications.  Both requests will degrade compression by an amount depending on how often such
-requests are made.
-<p>
-<tt>deflate()</tt> has a return value that can indicate errors, yet we do not check it here.  Why
-not?  Well, it turns out that <tt>deflate()</tt> can do no wrong here.  Let's go through
-<tt>deflate()</tt>'s return values and dispense with them one by one.  The possible values are
-<tt>Z_OK</tt>, <tt>Z_STREAM_END</tt>, <tt>Z_STREAM_ERROR</tt>, or <tt>Z_BUF_ERROR</tt>.  <tt>Z_OK</tt>
-is, well, ok.  <tt>Z_STREAM_END</tt> is also ok and will be returned for the last call of
-<tt>deflate()</tt>.  This is already guaranteed by calling <tt>deflate()</tt> with <tt>Z_FINISH</tt>
-until it has no more output.  <tt>Z_STREAM_ERROR</tt> is only possible if the stream is not
-initialized properly, but we did initialize it properly.  There is no harm in checking for
-<tt>Z_STREAM_ERROR</tt> here, for example to check for the possibility that some
-other part of the application inadvertently clobbered the memory containing the <em>zlib</em> state.
-<tt>Z_BUF_ERROR</tt> will be explained further below, but
-suffice it to say that this is simply an indication that <tt>deflate()</tt> could not consume
-more input or produce more output.  <tt>deflate()</tt> can be called again with more output space
-or more available input, which it will be in this code.
-<pre><b>
-            ret = deflate(&amp;strm, flush);    /* no bad return value */
-            assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
-</b></pre>
-Now we compute how much output <tt>deflate()</tt> provided on the last call, which is the
-difference between how much space was provided before the call, and how much output space
-is still available after the call.  Then that data, if any, is written to the output file.
-We can then reuse the output buffer for the next call of <tt>deflate()</tt>.  Again if there
-is a file i/o error, we call <tt>deflateEnd()</tt> before returning to avoid a memory leak.
-<pre><b>
-            have = CHUNK - strm.avail_out;
-            if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
-                (void)deflateEnd(&amp;strm);
-                return Z_ERRNO;
-            }
-</b></pre>
-The inner <tt>do</tt>-loop is repeated until the last <tt>deflate()</tt> call fails to fill the
-provided output buffer.  Then we know that <tt>deflate()</tt> has done as much as it can with
-the provided input, and that all of that input has been consumed.  We can then fall out of this
-loop and reuse the input buffer.
-<p>
-The way we tell that <tt>deflate()</tt> has no more output is by seeing that it did not fill
-the output buffer, leaving <tt>avail_out</tt> greater than zero.  However suppose that
-<tt>deflate()</tt> has no more output, but just so happened to exactly fill the output buffer!
-<tt>avail_out</tt> is zero, and we can't tell that <tt>deflate()</tt> has done all it can.
-As far as we know, <tt>deflate()</tt>
-has more output for us.  So we call it again.  But now <tt>deflate()</tt> produces no output
-at all, and <tt>avail_out</tt> remains unchanged as <tt>CHUNK</tt>.  That <tt>deflate()</tt> call
-wasn't able to do anything, either consume input or produce output, and so it returns
-<tt>Z_BUF_ERROR</tt>.  (See, I told you I'd cover this later.)  However this is not a problem at
-all.  Now we finally have the desired indication that <tt>deflate()</tt> is really done,
-and so we drop out of the inner loop to provide more input to <tt>deflate()</tt>.
-<p>
-With <tt>flush</tt> set to <tt>Z_FINISH</tt>, this final set of <tt>deflate()</tt> calls will
-complete the output stream.  Once that is done, subsequent calls of <tt>deflate()</tt> would return
-<tt>Z_STREAM_ERROR</tt> if the flush parameter is not <tt>Z_FINISH</tt>, and do no more processing
-until the state is reinitialized.
-<p>
-Some applications of <em>zlib</em> have two loops that call <tt>deflate()</tt>
-instead of the single inner loop we have here.  The first loop would call
-without flushing and feed all of the data to <tt>deflate()</tt>.  The second loop would call
-<tt>deflate()</tt> with no more
-data and the <tt>Z_FINISH</tt> parameter to complete the process.  As you can see from this
-example, that can be avoided by simply keeping track of the current flush state.
-<pre><b>
-        } while (strm.avail_out == 0);
-        assert(strm.avail_in == 0);     /* all input will be used */
-</b></pre><!-- -->
-Now we check to see if we have already processed all of the input file.  That information was
-saved in the <tt>flush</tt> variable, so we see if that was set to <tt>Z_FINISH</tt>.  If so,
-then we're done and we fall out of the outer loop.  We're guaranteed to get <tt>Z_STREAM_END</tt>
-from the last <tt>deflate()</tt> call, since we ran it until the last chunk of input was
-consumed and all of the output was generated.
-<pre><b>
-        /* done when last data in file processed */
-    } while (flush != Z_FINISH);
-    assert(ret == Z_STREAM_END);        /* stream will be complete */
-</b></pre><!-- -->
-The process is complete, but we still need to deallocate the state to avoid a memory leak
-(or rather more like a memory hemorrhage if you didn't do this).  Then
-finally we can return with a happy return value.
-<pre><b>
-    /* clean up and return */
-    (void)deflateEnd(&amp;strm);
-    return Z_OK;
-}
-</b></pre><!-- -->
-Now we do the same thing for decompression in the <tt>inf()</tt> routine. <tt>inf()</tt>
-decompresses what is hopefully a valid <em>zlib</em> stream from the input file and writes the
-uncompressed data to the output file.  Much of the discussion above for <tt>def()</tt>
-applies to <tt>inf()</tt> as well, so the discussion here will focus on the differences between
-the two.
-<pre><b>
-/* Decompress from file source to file dest until stream ends or EOF.
-   inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be
-   allocated for processing, Z_DATA_ERROR if the deflate data is
-   invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and
-   the version of the library linked do not match, or Z_ERRNO if there
-   is an error reading or writing the files. */
-int inf(FILE *source, FILE *dest)
-{
-</b></pre>
-The local variables have the same functionality as they do for <tt>def()</tt>.  The
-only difference is that there is no <tt>flush</tt> variable, since <tt>inflate()</tt>
-can tell from the <em>zlib</em> stream itself when the stream is complete.
-<pre><b>
-    int ret;
-    unsigned have;
-    z_stream strm;
-    char in[CHUNK];
-    char out[CHUNK];
-</b></pre><!-- -->
-The initialization of the state is the same, except that there is no compression level,
-of course, and two more elements of the structure are initialized.  <tt>avail_in</tt>
-and <tt>next_in</tt> must be initialized before calling <tt>inflateInit()</tt>.  This
-is because the application has the option to provide the start of the zlib stream in
-order for <tt>inflateInit()</tt> to have access to information about the compression
-method to aid in memory allocation.  In the current implementation of <em>zlib</em>
-(up through versions 1.2.x), the method-dependent memory allocations are deferred to the first call of
-<tt>inflate()</tt> anyway.  However those fields must be initialized since later versions
-of <em>zlib</em> that provide more compression methods may take advantage of this interface.
-In any case, no decompression is performed by <tt>inflateInit()</tt>, so the
-<tt>avail_out</tt> and <tt>next_out</tt> fields do not need to be initialized before calling.
-<p>
-Here <tt>avail_in</tt> is set to zero and <tt>next_in</tt> is set to <tt>Z_NULL</tt> to
-indicate that no input data is being provided.
-<pre><b>
-    /* allocate inflate state */
-    strm.zalloc = Z_NULL;
-    strm.zfree = Z_NULL;
-    strm.opaque = Z_NULL;
-    strm.avail_in = 0;
-    strm.next_in = Z_NULL;
-    ret = inflateInit(&amp;strm);
-    if (ret != Z_OK)
-        return ret;
-</b></pre><!-- -->
-The outer <tt>do</tt>-loop decompresses input until <tt>inflate()</tt> indicates
-that it has reached the end of the compressed data and has produced all of the uncompressed
-output.  This is in contrast to <tt>def()</tt> which processes all of the input file.
-If end-of-file is reached before the compressed data self-terminates, then the compressed
-data is incomplete and an error is returned.
-<pre><b>
-    /* decompress until deflate stream ends or end of file */
-    do {
-</b></pre>
-We read input data and set the <tt>strm</tt> structure accordingly.  If we've reached the
-end of the input file, then we leave the outer loop and report an error, since the
-compressed data is incomplete.  Note that we may read more data than is eventually consumed
-by <tt>inflate()</tt>, if the input file continues past the <em>zlib</em> stream.
-For applications where <em>zlib</em> streams are embedded in other data, this routine would
-need to be modified to return the unused data, or at least indicate how much of the input
-data was not used, so the application would know where to pick up after the <em>zlib</em> stream.
-<pre><b>
-        strm.avail_in = fread(in, 1, CHUNK, source);
-        if (ferror(source)) {
-            (void)inflateEnd(&amp;strm);
-            return Z_ERRNO;
-        }
-        if (strm.avail_in == 0)
-            break;
-        strm.next_in = in;
-</b></pre><!-- -->
-The inner <tt>do</tt>-loop has the same function it did in <tt>def()</tt>, which is to
-keep calling <tt>inflate()</tt> until has generated all of the output it can with the
-provided input.
-<pre><b>
-        /* run inflate() on input until output buffer not full */
-        do {
-</b></pre>
-Just like in <tt>def()</tt>, the same output space is provided for each call of <tt>inflate()</tt>.
-<pre><b>
-            strm.avail_out = CHUNK;
-            strm.next_out = out;
-</b></pre>
-Now we run the decompression engine itself.  There is no need to adjust the flush parameter, since
-the <em>zlib</em> format is self-terminating. The main difference here is that there are
-return values that we need to pay attention to.  <tt>Z_DATA_ERROR</tt>
-indicates that <tt>inflate()</tt> detected an error in the <em>zlib</em> compressed data format,
-which means that either the data is not a <em>zlib</em> stream to begin with, or that the data was
-corrupted somewhere along the way since it was compressed.  The other error to be processed is
-<tt>Z_MEM_ERROR</tt>, which can occur since memory allocation is deferred until <tt>inflate()</tt>
-needs it, unlike <tt>deflate()</tt>, whose memory is allocated at the start by <tt>deflateInit()</tt>.
-<p>
-Advanced applications may use
-<tt>deflateSetDictionary()</tt> to prime <tt>deflate()</tt> with a set of likely data to improve the
-first 32K or so of compression.  This is noted in the <em>zlib</em> header, so <tt>inflate()</tt>
-requests that that dictionary be provided before it can start to decompress.  Without the dictionary,
-correct decompression is not possible.  For this routine, we have no idea what the dictionary is,
-so the <tt>Z_NEED_DICT</tt> indication is converted to a <tt>Z_DATA_ERROR</tt>.
-<p>
-<tt>inflate()</tt> can also return <tt>Z_STREAM_ERROR</tt>, which should not be possible here,
-but could be checked for as noted above for <tt>def()</tt>.  <tt>Z_BUF_ERROR</tt> does not need to be
-checked for here, for the same reasons noted for <tt>def()</tt>.  <tt>Z_STREAM_END</tt> will be
-checked for later.
-<pre><b>
-            ret = inflate(&amp;strm, Z_NO_FLUSH);
-            assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
-            switch (ret) {
-            case Z_NEED_DICT:
-                ret = Z_DATA_ERROR;     /* and fall through */
-            case Z_DATA_ERROR:
-            case Z_MEM_ERROR:
-                (void)inflateEnd(&amp;strm);
-                return ret;
-            }
-</b></pre>
-The output of <tt>inflate()</tt> is handled identically to that of <tt>deflate()</tt>.
-<pre><b>
-            have = CHUNK - strm.avail_out;
-            if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
-                (void)inflateEnd(&amp;strm);
-                return Z_ERRNO;
-            }
-</b></pre>
-The inner <tt>do</tt>-loop ends when <tt>inflate()</tt> has no more output as indicated
-by not filling the output buffer, just as for <tt>deflate()</tt>.  In this case, we cannot
-assert that <tt>strm.avail_in</tt> will be zero, since the deflate stream may end before the file
-does.
-<pre><b>
-        } while (strm.avail_out == 0);
-</b></pre><!-- -->
-The outer <tt>do</tt>-loop ends when <tt>inflate()</tt> reports that it has reached the
-end of the input <em>zlib</em> stream, has completed the decompression and integrity
-check, and has provided all of the output.  This is indicated by the <tt>inflate()</tt>
-return value <tt>Z_STREAM_END</tt>.  The inner loop is guaranteed to leave <tt>ret</tt>
-equal to <tt>Z_STREAM_END</tt> if the last chunk of the input file read contained the end
-of the <em>zlib</em> stream.  So if the return value is not <tt>Z_STREAM_END</tt>, the
-loop continues to read more input.
-<pre><b>
-        /* done when inflate() says it's done */
-    } while (ret != Z_STREAM_END);
-</b></pre><!-- -->
-At this point, decompression successfully completed, or we broke out of the loop due to no
-more data being available from the input file.  If the last <tt>inflate()</tt> return value
-is not <tt>Z_STREAM_END</tt>, then the <em>zlib</em> stream was incomplete and a data error
-is returned.  Otherwise, we return with a happy return value.  Of course, <tt>inflateEnd()</tt>
-is called first to avoid a memory leak.
-<pre><b>
-    /* clean up and return */
-    (void)inflateEnd(&amp;strm);
-    return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR;
-}
-</b></pre><!-- -->
-That ends the routines that directly use <em>zlib</em>.  The following routines make this
-a command-line program by running data through the above routines from <tt>stdin</tt> to
-<tt>stdout</tt>, and handling any errors reported by <tt>def()</tt> or <tt>inf()</tt>.
-<p>
-<tt>zerr()</tt> is used to interpret the possible error codes from <tt>def()</tt>
-and <tt>inf()</tt>, as detailed in their comments above, and print out an error message.
-Note that these are only a subset of the possible return values from <tt>deflate()</tt>
-and <tt>inflate()</tt>.
-<pre><b>
-/* report a zlib or i/o error */
-void zerr(int ret)
-{
-    fputs("zpipe: ", stderr);
-    switch (ret) {
-    case Z_ERRNO:
-        if (ferror(stdin))
-            fputs("error reading stdin\n", stderr);
-        if (ferror(stdout))
-            fputs("error writing stdout\n", stderr);
-        break;
-    case Z_STREAM_ERROR:
-        fputs("invalid compression level\n", stderr);
-        break;
-    case Z_DATA_ERROR:
-        fputs("invalid or incomplete deflate data\n", stderr);
-        break;
-    case Z_MEM_ERROR:
-        fputs("out of memory\n", stderr);
-        break;
-    case Z_VERSION_ERROR:
-        fputs("zlib version mismatch!\n", stderr);
-    }
-}
-</b></pre><!-- -->
-Here is the <tt>main()</tt> routine used to test <tt>def()</tt> and <tt>inf()</tt>.  The
-<tt>zpipe</tt> command is simply a compression pipe from <tt>stdin</tt> to <tt>stdout</tt>, if
-no arguments are given, or it is a decompression pipe if <tt>zpipe -d</tt> is used.  If any other
-arguments are provided, no compression or decompression is performed.  Instead a usage
-message is displayed.  Examples are <tt>zpipe < foo.txt > foo.txt.z</tt> to compress, and
-<tt>zpipe -d < foo.txt.z > foo.txt</tt> to decompress.
-<pre><b>
-/* compress or decompress from stdin to stdout */
-int main(int argc, char **argv)
-{
-    int ret;
-
-    /* do compression if no arguments */
-    if (argc == 1) {
-        ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);
-        if (ret != Z_OK)
-            zerr(ret);
-        return ret;
-    }
-
-    /* do decompression if -d specified */
-    else if (argc == 2 &amp;&amp; strcmp(argv[1], "-d") == 0) {
-        ret = inf(stdin, stdout);
-        if (ret != Z_OK)
-            zerr(ret);
-        return ret;
-    }
-
-    /* otherwise, report usage */
-    else {
-        fputs("zpipe usage: zpipe [-d] &lt; source &gt; dest\n", stderr);
-        return 1;
-    }
-}
-</b></pre>
-<hr>
-<i>Copyright (c) 2004 by Mark Adler<br>Last modified 13 November 2004</i>
-</body>
-</html>
diff --git a/source4/lib/zlib/examples/zpipe.c b/source4/lib/zlib/examples/zpipe.c
deleted file mode 100644
index 26abb56a9c..0000000000
--- a/source4/lib/zlib/examples/zpipe.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/* zpipe.c: example of proper use of zlib's inflate() and deflate()
-   Not copyrighted -- provided to the public domain
-   Version 1.2  9 November 2004  Mark Adler */
-
-/* Version history:
-   1.0  30 Oct 2004  First version
-   1.1   8 Nov 2004  Add void casting for unused return values
-                     Use switch statement for inflate() return values
-   1.2   9 Nov 2004  Add assertions to document zlib guarantees
-   1.3   6 Apr 2005  Remove incorrect assertion in inf()
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <assert.h>
-#include "zlib.h"
-
-#define CHUNK 16384
-
-/* Compress from file source to file dest until EOF on source.
-   def() returns Z_OK on success, Z_MEM_ERROR if memory could not be
-   allocated for processing, Z_STREAM_ERROR if an invalid compression
-   level is supplied, Z_VERSION_ERROR if the version of zlib.h and the
-   version of the library linked do not match, or Z_ERRNO if there is
-   an error reading or writing the files. */
-int def(FILE *source, FILE *dest, int level)
-{
-    int ret, flush;
-    unsigned have;
-    z_stream strm;
-    char in[CHUNK];
-    char out[CHUNK];
-
-    /* allocate deflate state */
-    strm.zalloc = Z_NULL;
-    strm.zfree = Z_NULL;
-    strm.opaque = Z_NULL;
-    ret = deflateInit(&strm, level);
-    if (ret != Z_OK)
-        return ret;
-
-    /* compress until end of file */
-    do {
-        strm.avail_in = fread(in, 1, CHUNK, source);
-        if (ferror(source)) {
-            (void)deflateEnd(&strm);
-            return Z_ERRNO;
-        }
-        flush = feof(source) ? Z_FINISH : Z_NO_FLUSH;
-        strm.next_in = in;
-
-        /* run deflate() on input until output buffer not full, finish
-           compression if all of source has been read in */
-        do {
-            strm.avail_out = CHUNK;
-            strm.next_out = out;
-            ret = deflate(&strm, flush);    /* no bad return value */
-            assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
-            have = CHUNK - strm.avail_out;
-            if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
-                (void)deflateEnd(&strm);
-                return Z_ERRNO;
-            }
-        } while (strm.avail_out == 0);
-        assert(strm.avail_in == 0);     /* all input will be used */
-
-        /* done when last data in file processed */
-    } while (flush != Z_FINISH);
-    assert(ret == Z_STREAM_END);        /* stream will be complete */
-
-    /* clean up and return */
-    (void)deflateEnd(&strm);
-    return Z_OK;
-}
-
-/* Decompress from file source to file dest until stream ends or EOF.
-   inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be
-   allocated for processing, Z_DATA_ERROR if the deflate data is
-   invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and
-   the version of the library linked do not match, or Z_ERRNO if there
-   is an error reading or writing the files. */
-int inf(FILE *source, FILE *dest)
-{
-    int ret;
-    unsigned have;
-    z_stream strm;
-    char in[CHUNK];
-    char out[CHUNK];
-
-    /* allocate inflate state */
-    strm.zalloc = Z_NULL;
-    strm.zfree = Z_NULL;
-    strm.opaque = Z_NULL;
-    strm.avail_in = 0;
-    strm.next_in = Z_NULL;
-    ret = inflateInit(&strm);
-    if (ret != Z_OK)
-        return ret;
-
-    /* decompress until deflate stream ends or end of file */
-    do {
-        strm.avail_in = fread(in, 1, CHUNK, source);
-        if (ferror(source)) {
-            (void)inflateEnd(&strm);
-            return Z_ERRNO;
-        }
-        if (strm.avail_in == 0)
-            break;
-        strm.next_in = in;
-
-        /* run inflate() on input until output buffer not full */
-        do {
-            strm.avail_out = CHUNK;
-            strm.next_out = out;
-            ret = inflate(&strm, Z_NO_FLUSH);
-            assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
-            switch (ret) {
-            case Z_NEED_DICT:
-                ret = Z_DATA_ERROR;     /* and fall through */
-            case Z_DATA_ERROR:
-            case Z_MEM_ERROR:
-                (void)inflateEnd(&strm);
-                return ret;
-            }
-            have = CHUNK - strm.avail_out;
-            if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
-                (void)inflateEnd(&strm);
-                return Z_ERRNO;
-            }
-        } while (strm.avail_out == 0);
-
-        /* done when inflate() says it's done */
-    } while (ret != Z_STREAM_END);
-
-    /* clean up and return */
-    (void)inflateEnd(&strm);
-    return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR;
-}
-
-/* report a zlib or i/o error */
-void zerr(int ret)
-{
-    fputs("zpipe: ", stderr);
-    switch (ret) {
-    case Z_ERRNO:
-        if (ferror(stdin))
-            fputs("error reading stdin\n", stderr);
-        if (ferror(stdout))
-            fputs("error writing stdout\n", stderr);
-        break;
-    case Z_STREAM_ERROR:
-        fputs("invalid compression level\n", stderr);
-        break;
-    case Z_DATA_ERROR:
-        fputs("invalid or incomplete deflate data\n", stderr);
-        break;
-    case Z_MEM_ERROR:
-        fputs("out of memory\n", stderr);
-        break;
-    case Z_VERSION_ERROR:
-        fputs("zlib version mismatch!\n", stderr);
-    }
-}
-
-/* compress or decompress from stdin to stdout */
-int main(int argc, char **argv)
-{
-    int ret;
-
-    /* do compression if no arguments */
-    if (argc == 1) {
-        ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);
-        if (ret != Z_OK)
-            zerr(ret);
-        return ret;
-    }
-
-    /* do decompression if -d specified */
-    else if (argc == 2 && strcmp(argv[1], "-d") == 0) {
-        ret = inf(stdin, stdout);
-        if (ret != Z_OK)
-            zerr(ret);
-        return ret;
-    }
-
-    /* otherwise, report usage */
-    else {
-        fputs("zpipe usage: zpipe [-d] < source > dest\n", stderr);
-        return 1;
-    }
-}
diff --git a/source4/lib/zlib/examples/zran.c b/source4/lib/zlib/examples/zran.c
deleted file mode 100644
index 8c7717eb2c..0000000000
--- a/source4/lib/zlib/examples/zran.c
+++ /dev/null
@@ -1,404 +0,0 @@
-/* zran.c -- example of zlib/gzip stream indexing and random access
- * Copyright (C) 2005 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
-   Version 1.0  29 May 2005  Mark Adler */
-
-/* Illustrate the use of Z_BLOCK, inflatePrime(), and inflateSetDictionary()
-   for random access of a compressed file.  A file containing a zlib or gzip
-   stream is provided on the command line.  The compressed stream is decoded in
-   its entirety, and an index built with access points about every SPAN bytes
-   in the uncompressed output.  The compressed file is left open, and can then
-   be read randomly, having to decompress on the average SPAN/2 uncompressed
-   bytes before getting to the desired block of data.
-
-   An access point can be created at the start of any deflate block, by saving
-   the starting file offset and bit of that block, and the 32K bytes of
-   uncompressed data that precede that block.  Also the uncompressed offset of
-   that block is saved to provide a referece for locating a desired starting
-   point in the uncompressed stream.  build_index() works by decompressing the
-   input zlib or gzip stream a block at a time, and at the end of each block
-   deciding if enough uncompressed data has gone by to justify the creation of
-   a new access point.  If so, that point is saved in a data structure that
-   grows as needed to accommodate the points.
-
-   To use the index, an offset in the uncompressed data is provided, for which
-   the latest accees point at or preceding that offset is located in the index.
-   The input file is positioned to the specified location in the index, and if
-   necessary the first few bits of the compressed data is read from the file.
-   inflate is initialized with those bits and the 32K of uncompressed data, and
-   the decompression then proceeds until the desired offset in the file is
-   reached.  Then the decompression continues to read the desired uncompressed
-   data from the file.
-
-   Another approach would be to generate the index on demand.  In that case,
-   requests for random access reads from the compressed data would try to use
-   the index, but if a read far enough past the end of the index is required,
-   then further index entries would be generated and added.
-
-   There is some fair bit of overhead to starting inflation for the random
-   access, mainly copying the 32K byte dictionary.  So if small pieces of the
-   file are being accessed, it would make sense to implement a cache to hold
-   some lookahead and avoid many calls to extract() for small lengths.
-
-   Another way to build an index would be to use inflateCopy().  That would
-   not be constrained to have access points at block boundaries, but requires
-   more memory per access point, and also cannot be saved to file due to the
-   use of pointers in the state.  The approach here allows for storage of the
-   index in a file.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "zlib.h"
-
-#define local static
-
-#define SPAN 1048576L       /* desired distance between access points */
-#define WINSIZE 32768U      /* sliding window size */
-#define CHUNK 16384         /* file input buffer size */
-
-/* access point entry */
-struct point {
-    off_t out;          /* corresponding offset in uncompressed data */
-    off_t in;           /* offset in input file of first full byte */
-    int bits;           /* number of bits (1-7) from byte at in - 1, or 0 */
-    unsigned char window[WINSIZE];  /* preceding 32K of uncompressed data */
-};
-
-/* access point list */
-struct access {
-    int have;           /* number of list entries filled in */
-    int size;           /* number of list entries allocated */
-    struct point *list; /* allocated list */
-};
-
-/* Deallocate an index built by build_index() */
-local void free_index(struct access *index)
-{
-    if (index != NULL) {
-        free(index->list);
-        free(index);
-    }
-}
-
-/* Add an entry to the access point list.  If out of memory, deallocate the
-   existing list and return NULL. */
-local struct access *addpoint(struct access *index, int bits,
-    off_t in, off_t out, unsigned left, unsigned char *window)
-{
-    struct point *next;
-
-    /* if list is empty, create it (start with eight points) */
-    if (index == NULL) {
-        index = malloc(sizeof(struct access));
-        if (index == NULL) return NULL;
-        index->list = malloc(sizeof(struct point) << 3);
-        if (index->list == NULL) {
-            free(index);
-            return NULL;
-        }
-        index->size = 8;
-        index->have = 0;
-    }
-
-    /* if list is full, make it bigger */
-    else if (index->have == index->size) {
-        index->size <<= 1;
-        next = realloc(index->list, sizeof(struct point) * index->size);
-        if (next == NULL) {
-            free_index(index);
-            return NULL;
-        }
-        index->list = next;
-    }
-
-    /* fill in entry and increment how many we have */
-    next = index->list + index->have;
-    next->bits = bits;
-    next->in = in;
-    next->out = out;
-    if (left)
-        memcpy(next->window, window + WINSIZE - left, left);
-    if (left < WINSIZE)
-        memcpy(next->window + left, window, WINSIZE - left);
-    index->have++;
-
-    /* return list, possibly reallocated */
-    return index;
-}
-
-/* Make one entire pass through the compressed stream and build an index, with
-   access points about every span bytes of uncompressed output -- span is
-   chosen to balance the speed of random access against the memory requirements
-   of the list, about 32K bytes per access point.  Note that data after the end
-   of the first zlib or gzip stream in the file is ignored.  build_index()
-   returns the number of access points on success (>= 1), Z_MEM_ERROR for out
-   of memory, Z_DATA_ERROR for an error in the input file, or Z_ERRNO for a
-   file read error.  On success, *built points to the resulting index. */
-local int build_index(FILE *in, off_t span, struct access **built)
-{
-    int ret;
-    off_t totin, totout;        /* our own total counters to avoid 4GB limit */
-    off_t last;                 /* totout value of last access point */
-    struct access *index;       /* access points being generated */
-    z_stream strm;
-    unsigned char input[CHUNK];
-    unsigned char window[WINSIZE];
-
-    /* initialize inflate */
-    strm.zalloc = Z_NULL;
-    strm.zfree = Z_NULL;
-    strm.opaque = Z_NULL;
-    strm.avail_in = 0;
-    strm.next_in = Z_NULL;
-    ret = inflateInit2(&strm, 47);      /* automatic zlib or gzip decoding */
-    if (ret != Z_OK)
-        return ret;
-
-    /* inflate the input, maintain a sliding window, and build an index -- this
-       also validates the integrity of the compressed data using the check
-       information at the end of the gzip or zlib stream */
-    totin = totout = last = 0;
-    index = NULL;               /* will be allocated by first addpoint() */
-    strm.avail_out = 0;
-    do {
-        /* get some compressed data from input file */
-        strm.avail_in = fread(input, 1, CHUNK, in);
-        if (ferror(in)) {
-            ret = Z_ERRNO;
-            goto build_index_error;
-        }
-        if (strm.avail_in == 0) {
-            ret = Z_DATA_ERROR;
-            goto build_index_error;
-        }
-        strm.next_in = input;
-
-        /* process all of that, or until end of stream */
-        do {
-            /* reset sliding window if necessary */
-            if (strm.avail_out == 0) {
-                strm.avail_out = WINSIZE;
-                strm.next_out = window;
-            }
-
-            /* inflate until out of input, output, or at end of block --
-               update the total input and output counters */
-            totin += strm.avail_in;
-            totout += strm.avail_out;
-            ret = inflate(&strm, Z_BLOCK);      /* return at end of block */
-            totin -= strm.avail_in;
-            totout -= strm.avail_out;
-            if (ret == Z_NEED_DICT)
-                ret = Z_DATA_ERROR;
-            if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR)
-                goto build_index_error;
-            if (ret == Z_STREAM_END)
-                break;
-
-            /* if at end of block, consider adding an index entry (note that if
-               data_type indicates an end-of-block, then all of the
-               uncompressed data from that block has been delivered, and none
-               of the compressed data after that block has been consumed,
-               except for up to seven bits) -- the totout == 0 provides an
-               entry point after the zlib or gzip header, and assures that the
-               index always has at least one access point; we avoid creating an
-               access point after the last block by checking bit 6 of data_type
-             */
-            if ((strm.data_type & 128) && !(strm.data_type & 64) &&
-                (totout == 0 || totout - last > span)) {
-                index = addpoint(index, strm.data_type & 7, totin,
-                                 totout, strm.avail_out, window);
-                if (index == NULL) {
-                    ret = Z_MEM_ERROR;
-                    goto build_index_error;
-                }
-                last = totout;
-            }
-        } while (strm.avail_in != 0);
-    } while (ret != Z_STREAM_END);
-
-    /* clean up and return index (release unused entries in list) */
-    (void)inflateEnd(&strm);
-    index = realloc(index, sizeof(struct point) * index->have);
-    index->size = index->have;
-    *built = index;
-    return index->size;
-
-    /* return error */
-  build_index_error:
-    (void)inflateEnd(&strm);
-    if (index != NULL)
-        free_index(index);
-    return ret;
-}
-
-/* Use the index to read len bytes from offset into buf, return bytes read or
-   negative for error (Z_DATA_ERROR or Z_MEM_ERROR).  If data is requested past
-   the end of the uncompressed data, then extract() will return a value less
-   than len, indicating how much as actually read into buf.  This function
-   should not return a data error unless the file was modified since the index
-   was generated.  extract() may also return Z_ERRNO if there is an error on
-   reading or seeking the input file. */
-local int extract(FILE *in, struct access *index, off_t offset,
-                  unsigned char *buf, int len)
-{
-    int ret, skip;
-    z_stream strm;
-    struct point *here;
-    unsigned char input[CHUNK];
-    unsigned char discard[WINSIZE];
-
-    /* proceed only if something reasonable to do */
-    if (len < 0)
-        return 0;
-
-    /* find where in stream to start */
-    here = index->list;
-    ret = index->have;
-    while (--ret && here[1].out <= offset)
-        here++;
-
-    /* initialize file and inflate state to start there */
-    strm.zalloc = Z_NULL;
-    strm.zfree = Z_NULL;
-    strm.opaque = Z_NULL;
-    strm.avail_in = 0;
-    strm.next_in = Z_NULL;
-    ret = inflateInit2(&strm, -15);         /* raw inflate */
-    if (ret != Z_OK)
-        return ret;
-    ret = fseeko(in, here->in - (here->bits ? 1 : 0), SEEK_SET);
-    if (ret == -1)
-        goto extract_ret;
-    if (here->bits) {
-        ret = getc(in);
-        if (ret == -1) {
-            ret = ferror(in) ? Z_ERRNO : Z_DATA_ERROR;
-            goto extract_ret;
-        }
-        (void)inflatePrime(&strm, here->bits, ret >> (8 - here->bits));
-    }
-    (void)inflateSetDictionary(&strm, here->window, WINSIZE);
-
-    /* skip uncompressed bytes until offset reached, then satisfy request */
-    offset -= here->out;
-    strm.avail_in = 0;
-    skip = 1;                               /* while skipping to offset */
-    do {
-        /* define where to put uncompressed data, and how much */
-        if (offset == 0 && skip) {          /* at offset now */
-            strm.avail_out = len;
-            strm.next_out = buf;
-            skip = 0;                       /* only do this once */
-        }
-        if (offset > WINSIZE) {             /* skip WINSIZE bytes */
-            strm.avail_out = WINSIZE;
-            strm.next_out = discard;
-            offset -= WINSIZE;
-        }
-        else if (offset != 0) {             /* last skip */
-            strm.avail_out = (unsigned)offset;
-            strm.next_out = discard;
-            offset = 0;
-        }
-
-        /* uncompress until avail_out filled, or end of stream */
-        do {
-            if (strm.avail_in == 0) {
-                strm.avail_in = fread(input, 1, CHUNK, in);
-                if (ferror(in)) {
-                    ret = Z_ERRNO;
-                    goto extract_ret;
-                }
-                if (strm.avail_in == 0) {
-                    ret = Z_DATA_ERROR;
-                    goto extract_ret;
-                }
-                strm.next_in = input;
-            }
-            ret = inflate(&strm, Z_NO_FLUSH);       /* normal inflate */
-            if (ret == Z_NEED_DICT)
-                ret = Z_DATA_ERROR;
-            if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR)
-                goto extract_ret;
-            if (ret == Z_STREAM_END)
-                break;
-        } while (strm.avail_out != 0);
-
-        /* if reach end of stream, then don't keep trying to get more */
-        if (ret == Z_STREAM_END)
-            break;
-
-        /* do until offset reached and requested data read, or stream ends */
-    } while (skip);
-
-    /* compute number of uncompressed bytes read after offset */
-    ret = skip ? 0 : len - strm.avail_out;
-
-    /* clean up and return bytes read or error */
-  extract_ret:
-    (void)inflateEnd(&strm);
-    return ret;
-}
-
-/* Demonstrate the use of build_index() and extract() by processing the file
-   provided on the command line, and the extracting 16K from about 2/3rds of
-   the way through the uncompressed output, and writing that to stdout. */
-int main(int argc, char **argv)
-{
-    int len;
-    off_t offset;
-    FILE *in;
-    struct access *index;
-    unsigned char buf[CHUNK];
-
-    /* open input file */
-    if (argc != 2) {
-        fprintf(stderr, "usage: zran file.gz\n");
-        return 1;
-    }
-    in = fopen(argv[1], "rb");
-    if (in == NULL) {
-        fprintf(stderr, "zran: could not open %s for reading\n", argv[1]);
-        return 1;
-    }
-
-    /* build index */
-    len = build_index(in, SPAN, &index);
-    if (len < 0) {
-        fclose(in);
-        switch (len) {
-        case Z_MEM_ERROR:
-            fprintf(stderr, "zran: out of memory\n");
-            break;
-        case Z_DATA_ERROR:
-            fprintf(stderr, "zran: compressed data error in %s\n", argv[1]);
-            break;
-        case Z_ERRNO:
-            fprintf(stderr, "zran: read error on %s\n", argv[1]);
-            break;
-        default:
-            fprintf(stderr, "zran: error %d while building index\n", len);
-        }
-        return 1;
-    }
-    fprintf(stderr, "zran: built index with %d access points\n", len);
-
-    /* use index by reading some bytes from an arbitrary offset */
-    offset = (index->list[index->have - 1].out << 1) / 3;
-    len = extract(in, index, offset, buf, CHUNK);
-    if (len < 0)
-        fprintf(stderr, "zran: extraction failed: %s error\n",
-                len == Z_MEM_ERROR ? "out of memory" : "input corrupted");
-    else {
-        fwrite(buf, 1, len, stdout);
-        fprintf(stderr, "zran: extracted %d bytes at %llu\n", len, offset);
-    }
-
-    /* clean up and exit */
-    free_index(index);
-    fclose(in);
-    return 0;
-}