summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--docs/docbook/projdoc/Integrating-with-Windows.xml98
-rw-r--r--docs/docbook/projdoc/InterdomainTrusts.xml30
-rw-r--r--docs/docbook/projdoc/securing-samba.xml399
3 files changed, 355 insertions, 172 deletions
diff --git a/docs/docbook/projdoc/Integrating-with-Windows.xml b/docs/docbook/projdoc/Integrating-with-Windows.xml
index 9c397172dd..eae51295df 100644
--- a/docs/docbook/projdoc/Integrating-with-Windows.xml
+++ b/docs/docbook/projdoc/Integrating-with-Windows.xml
@@ -24,6 +24,26 @@ NetBIOS over TCP/IP then this section may help you to resolve networking problem
</para>
</note>
+<sect1>
+<title>Features and Benefits</title>
+
+<para>
+Many MS Windows network administrators have never been exposed to basic TCP/IP
+networking as it is implemented in a Unix/Linux operating system. Likewise, many Unix and
+Linux adminsitrators have not been exposed to the intricacies of MS Windows TCP/IP based
+networking (and may have no desire to be either).
+</para>
+
+<para>
+This chapter gives a short introduction to the basics of how a name can be resolved to
+it's IP address for each operating system environment.
+</para>
+
+</sect1>
+
+<sect1>
+<title>Background Information</title>
+
<para>
Since the introduction of MS Windows 2000 it is possible to run MS Windows networking
without the use of NetBIOS over TCP/IP. NetBIOS over TCP/IP uses UDP port 137 for NetBIOS
@@ -48,6 +68,7 @@ Use of DHCP with ADS is recommended as a further means of maintaining central co
over client workstation network configuration.
</para>
+</sect1>
<sect1>
<title>Name Resolution in a pure Unix/Linux world</title>
@@ -70,10 +91,10 @@ The key configuration files covered in this section are:
Contains a static list of IP Addresses and names.
eg:
</para>
-<para><programlisting>
+<para><screen>
127.0.0.1 localhost localhost.localdomain
192.168.1.1 bigbox.caldera.com bigbox alias4box
-</programlisting></para>
+</screen></para>
<para>
The purpose of <filename>/etc/hosts</filename> is to provide a
@@ -181,10 +202,10 @@ critical configuration file. This file controls the order by
which name resolution may procede. The typical structure is:
</para>
-<para><programlisting>
+<para><screen>
order hosts,bind
multi on
-</programlisting></para>
+</screen></para>
<para>
then both addresses should be returned. Please refer to the
@@ -205,7 +226,7 @@ file typically has resolver object specifications as follows:
</para>
-<para><programlisting>
+<para><screen>
# /etc/nsswitch.conf
#
# Name Service Switch configuration file.
@@ -226,7 +247,7 @@ file typically has resolver object specifications as follows:
protocols: nis files
rpc: nis files
services: nis files
-</programlisting></para>
+</screen></para>
<para>
Of course, each of these mechanisms requires that the appropriate
@@ -280,7 +301,7 @@ the client/server.
The following are typical NetBIOS name/service type registrations:
</para>
-<para><programlisting>
+<para><screen>
Unique NetBIOS Names:
MACHINENAME&lt;00&gt; = Server Service is running on MACHINENAME
MACHINENAME&lt;03&gt; = Generic Machine Name (NetBIOS name)
@@ -292,7 +313,7 @@ The following are typical NetBIOS name/service type registrations:
WORKGROUP&lt;1c&gt; = Domain Controllers / Netlogon Servers
WORKGROUP&lt;1d&gt; = Local Master Browsers
WORKGROUP&lt;1e&gt; = Internet Name Resolvers
-</programlisting></para>
+</screen></para>
<para>
It should be noted that all NetBIOS machines register their own
@@ -392,7 +413,7 @@ to IP address mapping.
It typically looks like:
</para>
-<para><programlisting>
+<para><screen>
# Copyright (c) 1998 Microsoft Corp.
#
# This is a sample LMHOSTS file used by the Microsoft Wins Client (NetBIOS
@@ -469,7 +490,7 @@ It typically looks like:
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.
-</programlisting></para>
+</screen></para>
</sect2>
@@ -520,19 +541,19 @@ To configure Samba to be a WINS server the following parameter needs
to be added to the &smb.conf; file:
</para>
-<para><programlisting>
+<para><screen>
wins support = Yes
-</programlisting></para>
+</screen></para>
<para>
To configure Samba to use a WINS server the following parameters are
needed in the &smb.conf; file:
</para>
-<para><programlisting>
+<para><screen>
wins support = No
wins server = xxx.xxx.xxx.xxx
-</programlisting></para>
+</screen></para>
<para>
where <replaceable>xxx.xxx.xxx.xxx</replaceable> is the IP address
@@ -542,4 +563,53 @@ of the WINS server.
</sect2>
</sect1>
+<sect1>
+<title>Common Errors</title>
+
+<para>
+TCP/IP network configuration problems find every network administrator sooner or later.
+The cause can be anything from keybaord mishaps, forgetfulness, simple mistakes, and
+carelessness. Of course, noone is every deliberately careless!
+</para>
+
+ <sect2>
+ <title>My Boomerang Won't Come Back<title>
+
+ <para>
+ Well, the real complaint said, "I can ping my samba server from Windows, but I can
+ not ping my Windows machine from the samba server."
+ </para>
+
+ <para>
+ The Windows machine was at IP Address 192.168.1.2 with netmask 255.255.255.0, the
+ Samba server (Linux) was at IP Address 192.168.1.130 with netmast 255.255.255.128.
+ The machines were on a local network with no external connections.
+ <para>
+
+ <para>
+ Due to inconsistent netmasks, the Windows machine was on network 192.168.1.0/24, while
+ the Samba server was on network 192.168.1.128/25 - logically a different network.
+ </para>
+
+ </sect2>
+
+ <sect2>
+ <title>Very Slow Network Connections</title>
+
+ <para>
+ A common causes of slow network response includes:
+ </para>
+
+ <itemizedlist>
+ <listitem><para>Client is configured to use DNS and DNS server is down</para></listitem>
+ <listitem><para>Client is configured to use remote DNS server, but remote connection is down</para></listitem>
+ <listitem><para>Client is configured to use a WINS server, but there is no WINS server</para></listitem>
+ <listitem><para>Client is NOT configured to use a WINS server, but there is a WINS server</para></listitem>
+ <listitem><para>Firewall is filtering our DNS or WINS traffic</para></listitem>
+ </itemizedlist>
+
+ </sect2>
+
+</sect1>
+
</chapter>
diff --git a/docs/docbook/projdoc/InterdomainTrusts.xml b/docs/docbook/projdoc/InterdomainTrusts.xml
index 2c492d4ac0..ae780a4b61 100644
--- a/docs/docbook/projdoc/InterdomainTrusts.xml
+++ b/docs/docbook/projdoc/InterdomainTrusts.xml
@@ -16,6 +16,25 @@ possible for Samba-3 to NT4 trust (and vice versa), as well as Samba3 to Samba3
</para>
<sect1>
+<title>Features and Benefits</title>
+
+<para>
+Samba-3 can participate in Samba-to-Samba as well as in Samba-to-MS Windows NT4 style
+trust relationships. This imparts to Samba similar scalability as is possible with
+MS Windows NT4.
+</para>
+
+<para>
+Given that Samba-3 has the capability to function with a scalable backend authentication
+database such as LDAP, and given it's ability to run in Primary as well as Backup Domain control
+modes, the administrator would be well advised to consider alternatives to the use of
+Interdomain trusts simplt because by the very nature of how this works it is fragile.
+That was after all a key reason for the development and adoption of Microsoft Active Directory.
+</para>
+
+</sect1>
+
+<sect1>
<title>Trust Relationship Background</title>
<para>
@@ -219,4 +238,15 @@ the <filename>secrets.tdb</filename> file.
</sect2>
</sect1>
+<sect1>
+<title>Common Errors</title>
+
+<para>
+Interdomain trust relationships should NOT be attempted on networks that are unstable
+or that suffer regular outages. Network stability and integrity are key concerns with
+distributed trusted domains.
+</para>
+
+</sect1>
+
</chapter>
diff --git a/docs/docbook/projdoc/securing-samba.xml b/docs/docbook/projdoc/securing-samba.xml
index 204fceeb4a..58634fba35 100644
--- a/docs/docbook/projdoc/securing-samba.xml
+++ b/docs/docbook/projdoc/securing-samba.xml
@@ -3,7 +3,7 @@
<chapterinfo>
&author.tridge;
&author.jht;
- <pubdate>17 March 2003</pubdate>
+ <pubdate>May 26, 2003</pubdate>
</chapterinfo>
<title>Securing Samba</title>
@@ -16,209 +16,292 @@ important security fix. The information contained here applies to Samba
installations in general.
</para>
-</sect1>
-
-<sect1>
-<title>Using host based protection</title>
-
-<para>
-In many installations of Samba the greatest threat comes for outside
-your immediate network. By default Samba will accept connections from
-any host, which means that if you run an insecure version of Samba on
-a host that is directly connected to the Internet you can be
-especially vulnerable.
-</para>
-
-<para>
-One of the simplest fixes in this case is to use the <command>hosts allow</command> and
-<command>hosts deny</command> options in the Samba &smb.conf; configuration file to only
-allow access to your server from a specific range of hosts. An example
-might be:
-</para>
-
-<para><programlisting>
- hosts allow = 127.0.0.1 192.168.2.0/24 192.168.3.0/24
- hosts deny = 0.0.0.0/0
-</programlisting></para>
-
-<para>
-The above will only allow SMB connections from 'localhost' (your own
-computer) and from the two private networks 192.168.2 and
-192.168.3. All other connections will be refused as soon
-as the client sends its first packet. The refusal will be marked as a
-'not listening on called name' error.
-</para>
-
-</sect1>
-
-<sect1>
-<title>User based protection</title>
-
<para>
-If you want to restrict access to your server to valid users only then the following
-method may be of use. In the smb.conf [globals] section put:
+A new apprentice reported for duty to the Chief Engineer of a boiler house. He said, "Here I am,
+if you will show me the boiler I'll start working on it." Then engineer replied, "You're leaning
+on it!"
</para>
-<para><programlisting>
- valid users = @smbusers, jacko
-</programlisting></para>
-
<para>
-What this does is, it restricts all server access to either the user <emphasis>jacko</emphasis>
-or to members of the system group <emphasis>smbusers</emphasis>.
+Security concerns are just like that: You need to know a little about the subject to appreciate
+how obvious most of it really is. The challenge for most of us is to discover that first morsel
+of knowledge with which we may unlock the secrets of the masters.
</para>
</sect1>
<sect1>
-
-<title>Using interface protection</title>
+<title>Features and Benefits</title>
<para>
-By default Samba will accept connections on any network interface that
-it finds on your system. That means if you have a ISDN line or a PPP
-connection to the Internet then Samba will accept connections on those
-links. This may not be what you want.
+There are three level at which security principals must be observed in order to render a site
+at least moderately secure. These are: the perimeter firewall, the configuration of the host
+server that is running Samba, and Samba itself.
</para>
<para>
-You can change this behaviour using options like the following:
+Samba permits a most flexible approach to network security. As far as possible Samba implements
+the latest protocols to permit more secure MS Windows file and print operations.
</para>
-<para><programlisting>
- interfaces = eth* lo
- bind interfaces only = yes
-</programlisting></para>
-
<para>
-This tells Samba to only listen for connections on interfaces with a
-name starting with 'eth' such as eth0, eth1, plus on the loopback
-interface called 'lo'. The name you will need to use depends on what
-OS you are using, in the above I used the common name for Ethernet
-adapters on Linux.
+Samba may be secured from connections that originate from outside the local network. This may be
+done using <emphasis>host based protection</emphasis> (using samba's implementation of a technology
+known as "tcpwrappers", or it may be done be using <emphasis>interface based exclusion</emphasis>
+so that <command>smbd</command> will bind only to specifically permitted interfaces. It is also
+possible to set specific share or resource based exclusions, eg: on the <parameter>IPC$</parameter>
+auto-share. The <parameter>IPC$</parameter> share is used for browsing purposes as well as to establish
+TCP/IP connections.
</para>
<para>
-If you use the above and someone tries to make a SMB connection to
-your host over a PPP interface called 'ppp0' then they will get a TCP
-connection refused reply. In that case no Samba code is run at all as
-the operating system has been told not to pass connections from that
-interface to any samba process.
+Another method by which Samba may be secured is by way of setting Access Control Entries in an Access
+Control List on the shares themselves. This is discussed in the chapter on File, Directory and Share Access
+Control.
</para>
</sect1>
<sect1>
-<title>Using a firewall</title>
+<title>Technical Discussion of Protective Measures and Issues</title>
<para>
-Many people use a firewall to deny access to services that they don't
-want exposed outside their network. This can be a very good idea,
-although I would recommend using it in conjunction with the above
-methods so that you are protected even if your firewall is not active
-for some reason.
-</para>
-
-<para>
-If you are setting up a firewall then you need to know what TCP and
-UDP ports to allow and block. Samba uses the following:
-</para>
-
-<para><programlisting>
- UDP/137 - used by nmbd
- UDP/138 - used by nmbd
- TCP/139 - used by smbd
- TCP/445 - used by smbd
-</programlisting></para>
-
-<para>
-The last one is important as many older firewall setups may not be
-aware of it, given that this port was only added to the protocol in
-recent years.
+The key challenge of security is the fact that protective measures suffice at best
+only to close the door on known exploits and breach techniques. Never assume that
+because you have followed these few measures that the Samba server is now an impenetrable
+fortress! Given the history of information systems so far, it is only a matter of time
+before someone will find yet another vulnerability.
</para>
+ <sect2>
+ <title>Using host based protection</title>
+
+ <para>
+ In many installations of Samba the greatest threat comes for outside
+ your immediate network. By default Samba will accept connections from
+ any host, which means that if you run an insecure version of Samba on
+ a host that is directly connected to the Internet you can be
+ especially vulnerable.
+ </para>
+
+ <para>
+ One of the simplest fixes in this case is to use the <command>hosts allow</command> and
+ <command>hosts deny</command> options in the Samba &smb.conf; configuration file to only
+ allow access to your server from a specific range of hosts. An example
+ might be:
+ </para>
+
+ <para><screen>
+ hosts allow = 127.0.0.1 192.168.2.0/24 192.168.3.0/24
+ hosts deny = 0.0.0.0/0
+ </screen></para>
+
+ <para>
+ The above will only allow SMB connections from 'localhost' (your own
+ computer) and from the two private networks 192.168.2 and
+ 192.168.3. All other connections will be refused as soon
+ as the client sends its first packet. The refusal will be marked as a
+ 'not listening on called name' error.
+ </para>
+
+ </sect2>
+
+ <sect2>
+ <title>User based protection</title>
+
+ <para>
+ If you want to restrict access to your server to valid users only then the following
+ method may be of use. In the smb.conf [globals] section put:
+ </para>
+
+ <para><screen>
+ valid users = @smbusers, jacko
+ </screen></para>
+
+ <para>
+ What this does is, it restricts all server access to either the user <emphasis>jacko</emphasis>
+ or to members of the system group <emphasis>smbusers</emphasis>.
+ </para>
+
+ </sect2>
+
+ <sect2>
+
+ <title>Using interface protection</title>
+
+ <para>
+ By default Samba will accept connections on any network interface that
+ it finds on your system. That means if you have a ISDN line or a PPP
+ connection to the Internet then Samba will accept connections on those
+ links. This may not be what you want.
+ </para>
+
+ <para>
+ You can change this behaviour using options like the following:
+ </para>
+
+ <para><screen>
+ interfaces = eth* lo
+ bind interfaces only = yes
+ </screen></para>
+
+ <para>
+ This tells Samba to only listen for connections on interfaces with a
+ name starting with 'eth' such as eth0, eth1, plus on the loopback
+ interface called 'lo'. The name you will need to use depends on what
+ OS you are using, in the above I used the common name for Ethernet
+ adapters on Linux.
+ </para>
+
+ <para>
+ If you use the above and someone tries to make a SMB connection to
+ your host over a PPP interface called 'ppp0' then they will get a TCP
+ connection refused reply. In that case no Samba code is run at all as
+ the operating system has been told not to pass connections from that
+ interface to any samba process.
+ </para>
+
+ </sect2>
+
+ <sect2>
+ <title>Using a firewall</title>
+
+ <para>
+ Many people use a firewall to deny access to services that they don't
+ want exposed outside their network. This can be a very good idea,
+ although I would recommend using it in conjunction with the above
+ methods so that you are protected even if your firewall is not active
+ for some reason.
+ </para>
+
+ <para>
+ If you are setting up a firewall then you need to know what TCP and
+ UDP ports to allow and block. Samba uses the following:
+ </para>
+
+ <para><screen>
+ UDP/137 - used by nmbd
+ UDP/138 - used by nmbd
+ TCP/139 - used by smbd
+ TCP/445 - used by smbd
+ </screen></para>
+
+ <para>
+ The last one is important as many older firewall setups may not be
+ aware of it, given that this port was only added to the protocol in
+ recent years.
+ </para>
+
+ </sect2>
+
+ <sect2>
+ <title>Using a IPC$ share deny</title>
+
+ <para>
+ If the above methods are not suitable, then you could also place a
+ more specific deny on the IPC$ share that is used in the recently
+ discovered security hole. This allows you to offer access to other
+ shares while denying access to IPC$ from potentially untrustworthy
+ hosts.
+ </para>
+
+ <para>
+ To do that you could use:
+ </para>
+
+ <para><screen>
+ [ipc$]
+ hosts allow = 192.168.115.0/24 127.0.0.1
+ hosts deny = 0.0.0.0/0
+ </screen></para>
+
+ <para>
+ this would tell Samba that IPC$ connections are not allowed from
+ anywhere but the two listed places (localhost and a local
+ subnet). Connections to other shares would still be allowed. As the
+ IPC$ share is the only share that is always accessible anonymously
+ this provides some level of protection against attackers that do not
+ know a username/password for your host.
+ </para>
+
+ <para>
+ If you use this method then clients will be given a 'access denied'
+ reply when they try to access the IPC$ share. That means that those
+ clients will not be able to browse shares, and may also be unable to
+ access some other resources.
+ </para>
+
+ <para>
+ This is not recommended unless you cannot use one of the other
+ methods listed above for some reason.
+ </para>
+
+ </sect2>
+
+ <sect2>
+ <title>NTLMv2 Security</title>
+
+ <para>
+ To configure NTLMv2 authentication the following registry keys are worth knowing about:
+ </para>
+
+ <para>
+ <screen>
+ [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa]
+ "lmcompatibilitylevel"=dword:00000003
+
+ 0x3 - Send NTLMv2 response only. Clients will use NTLMv2 authentication,
+ use NTLMv2 session security if the server supports it. Domain
+ controllers accept LM, NTLM and NTLMv2 authentication.
+
+ [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0]
+ "NtlmMinClientSec"=dword:00080000
+
+ 0x80000 - NTLMv2 session security. If either NtlmMinClientSec or
+ NtlmMinServerSec is set to 0x80000, the connection will fail if NTLMv2
+ session security is not negotiated.
+ </screen>
+ </para>
+ </sect2>
</sect1>
<sect1>
-<title>Using a IPC$ share deny</title>
-
-<para>
-If the above methods are not suitable, then you could also place a
-more specific deny on the IPC$ share that is used in the recently
-discovered security hole. This allows you to offer access to other
-shares while denying access to IPC$ from potentially untrustworthy
-hosts.
-</para>
-
-<para>
-To do that you could use:
-</para>
-
-<para><programlisting>
- [ipc$]
- hosts allow = 192.168.115.0/24 127.0.0.1
- hosts deny = 0.0.0.0/0
-</programlisting></para>
-
-<para>
-this would tell Samba that IPC$ connections are not allowed from
-anywhere but the two listed places (localhost and a local
-subnet). Connections to other shares would still be allowed. As the
-IPC$ share is the only share that is always accessible anonymously
-this provides some level of protection against attackers that do not
-know a username/password for your host.
-</para>
-
-<para>
-If you use this method then clients will be given a 'access denied'
-reply when they try to access the IPC$ share. That means that those
-clients will not be able to browse shares, and may also be unable to
-access some other resources.
-</para>
+<title>Upgrading Samba</title>
<para>
-This is not recommended unless you cannot use one of the other
-methods listed above for some reason.
+Please check regularly on <ulink url="http://www.samba.org/">http://www.samba.org/</ulink> for updates and
+important announcements. Occasionally security releases are made and
+it is highly recommended to upgrade Samba when a security vulnerability
+is discovered.
</para>
</sect1>
<sect1>
-<title>NTLMv2 Security</title>
+<title>Common Errors</title>
<para>
-To configure NTLMv2 authentication the following registry keys are worth knowing about:
+If all of samba and host platform configuration were really as intuitive as one might like then this
+section would not be necessary. Security issues are often vexing for a support person to resolve, not
+because of the complexity of the problem, but for reason that most admininstrators who post what turns
+out to be a security problem request are totally convinced that the problem is with Samba.
</para>
-<para>
-<programlisting>
- [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa]
- "lmcompatibilitylevel"=dword:00000003
-
- 0x3 - Send NTLMv2 response only. Clients will use NTLMv2 authentication,
- use NTLMv2 session security if the server supports it. Domain
- controllers accept LM, NTLM and NTLMv2 authentication.
+ <sect2>
+ <title>Smbclient works on localhost, but the network is dead</title>
- [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0]
- "NtlmMinClientSec"=dword:00080000
+ <para>
+ This is a very common problem. Red Hat Linux (as do others) will install a default firewall.
+ With the default firewall in place only traffic on the loopback adapter (IP address 127.0.0.1)
+ will be allowed through the firewall.
+ </para>
- 0x80000 - NTLMv2 session security. If either NtlmMinClientSec or
- NtlmMinServerSec is set to 0x80000, the connection will fail if NTLMv2
- session security is not negotiated.
-</programlisting>
-</para>
-</sect1>
+ <para>
+ The solution is either to remove the firewall (stop it) or to modify the firewall script to
+ allow SMB networking traffic through. See section above in this chapter.
+ </para>
-<sect1>
-<title>Upgrading Samba</title>
-
-<para>
-Please check regularly on <ulink url="http://www.samba.org/">http://www.samba.org/</ulink> for updates and
-important announcements. Occasionally security releases are made and
-it is highly recommended to upgrade Samba when a security vulnerability
-is discovered.
-</para>
+ </sect2>
</sect1>
-
</chapter>