diff options
| -rw-r--r-- | packaging/Mandrake/samba2.spec.tmpl~ | 1720 | ||||
| -rw-r--r-- | packaging/Mandrake/swat_16.xpm.bz2 | bin | 0 -> 1003 bytes | |||
| -rw-r--r-- | packaging/Mandrake/swat_32.xpm.bz2 | bin | 0 -> 2727 bytes | |||
| -rw-r--r-- | packaging/Mandrake/swat_48.xpm.bz2 | bin | 0 -> 3051 bytes |
4 files changed, 1720 insertions, 0 deletions
diff --git a/packaging/Mandrake/samba2.spec.tmpl~ b/packaging/Mandrake/samba2.spec.tmpl~ new file mode 100644 index 0000000000..616756a36f --- /dev/null +++ b/packaging/Mandrake/samba2.spec.tmpl~ @@ -0,0 +1,1720 @@ +%define pkg_name samba +%define ver 2.2.5 +%define rel 17mdk +%define vscanver 0.2.5c + +# Determine whether this is the system samba or not. +%define build_system 0 +%if %build_system +%define samba_major %{null} +%else +%define samba_major 3 +%global _iconsdir %{_datadir}/icons/ +%global _miconsdir %{_datadir}/icons/mini +%global _liconsdir %{_datadir}/icons/large +%global _menudir %{_libdir}/menu +#%%%%global __prefix /opt/samba%{samba_major} + +%global _mandir %{_datadir}/man +%endif + +# 2.2.4 and 1 replace by samba-team at release +%define pversion 3.0alpha20 +%define prelease 3 +# For testing this setup: +#%define pversion1 2.2.5 +#%define prelease1 %(date +%Y%m%d) + +#Check to see if p(version|release) has been replaced (1 if replaced) +%define have_pversion %(if [ "%pversion" = `echo "pversion" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi) +%define have_prelease %(if [ "%prelease" = `echo "prelease" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi) + +# We might have a prerelease: +%define have_pre %(echo %pversion|awk '{p=0} /[a-z,A-Z][a-z,A-Z]/ {p=1} {print p}') +%if %have_pre +%define pre_ver %(perl -e '$name="%pversion"; print ($name =~ /(.*?)[a-z]/);') +%define pre_pre %(echo %pversion|sed -e 's/%pre_ver//g') +%endif + + +# Check to see if we are running a build from a tarball release from samba.org +# (%have_pversion) If so, disable vscan, unless explicitly requested +# (--with vscan). +%define build_vscan 1 +%if %have_pversion +%define build_vscan 0 +%{?_with_vscan: %define build_vscan 1} +%endif + +# We now do detection of the Mandrake release we are building on: +#%define build_cooker %(if [ `awk '{print $3}' /etc/mandrake-release` = "Cooker" ];then echo 1; else echo 0; fi) +#%define build_cooker %(if [[ `cat /etc/mandrake-release|grep Cooker` ]];then echo 1; else echo 0; fi) +%define build_mdk91 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.1 ];then echo 1; else echo 0; fi) +%define build_mdk90 %(if [ `awk '{print $4}' /etc/mandrake-release` = 9.0 ];then echo 1; else echo 0; fi) +%define build_mdk83 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.3 ];then echo 1; else echo 0; fi) +%define build_mdk82 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.2 ];then echo 1; else echo 0; fi) +%define build_mdk81 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.1 ];then echo 1; else echo 0; fi) +%define build_mdk80 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.0 ];then echo 1; else echo 0; fi) +%define build_mdk72 %(if [ `awk '{print $4}' /etc/mandrake-release` = 7.2 ];then echo 1; else echo 0; fi) +%define build_non_default 0 + +# Default options +%define build_acl 1 +%define build_winbind 1 +%define build_wins 1 +%define build_ldap 1 +%define build_ads 1 + +# Set defaults for each version +%if %build_mdk91 +%endif + +%if %build_mdk90 +%endif + +%if %build_mdk83 +%endif + +%if %build_mdk82 +%endif + +%if %build_mdk81 +%define build_winbind 0 +%define build_wins 0 +%endif + +%if %build_mdk80 +%define build_acl 0 +%define build_winbind 0 +%define build_wins 0 +%endif + +%if %build_mdk72 +%define build_acl 0 +%define build_winbind 0 +%define build_wins 0 +%endif + +# Allow commandline option overrides (borrowed from Vince's qmail srpm): +# To use it, do rpm [-ba|--rebuild] --with 'xxx' +# Check if the rpm was built with the defaults, otherwise we inform the user +%define build_non_default 0 +%{?_with_acl: %{expand: %%define build_acl 1}} +%{?_with_acl: %{expand: %%define build_non_default 1}} +%{?_without_acl: %{expand: %%define build_acl 0}} +%{?_without_acl: %{expand: %%define build_non_default 1}} +%{?_with_winbind: %{expand: %%global build_winbind 1}} +%{?_with_winbind: %{expand: %%define build_non_default 1}} +%{?_without_winbind: %{expand: %%define build_winbind 0}} +%{?_without_winbind: %{expand: %%define build_non_default 1}} +%{?_with_wins: %{expand: %%global build_wins 1}} +%{?_with_wins: %{expand: %%define build_non_default 1}} +%{?_without_wins: %{expand: %%global build_wins 0}} +%{?_without_wins: %{expand: %%define build_non_default 1}} +%{?_with_ldap: %{expand: %%global build_ldap 1}} +%{?_with_ldap: %{expand: %%define build_non_default 1}} +%{?_without_ldap: %{expand: %%global build_ldap 0}} +%{?_without_ldap: %{expand: %%define build_non_default 1}} +%{?_with_ads: %{expand: %%define build_ads 1}} +%{?_with_ads: %{expand: %%define build_non_default 1}} +%{?_without_ads: %{expand: %%define build_ads 0}} +%{?_without_ads: %{expand: %%define build_non_default 1}} + +# As if that weren't enough, we're going to try building with antivirus +# support as an option also +%define build_fprot 0 +%define build_kaspersky 0 +%define build_mks 0 +%define build_openantivirus 0 +%define build_sophos 0 +%define build_symantec 0 +%define build_trend 0 +%if %build_vscan +%{?_with_fprot: %{expand: %%global build_fprot 1}} +%{?_with_kaspersky: %{expand: %%global build_kaspersky 1}} +%{?_with_mks: %{expand: %%global build_mks 1}} +%{?_with_openav: %{expand: %%global build_openantivirus 1}} +%{?_with_sophos: %{expand: %%global build_sophos 1}} +%{?_with_symantec: %{expand: %%global build_symantec 1}} +%{?_with_trend: %{expand: %%global build_trend 1}} +%define vscandir "samba-vscan-%{vscanver}" +%endif +%define vfsdir "examples.bin/VFS" + +#Workaround missing macros in 8.x: +%{!?perl_vendorlib: %{expand: %%global perl_vendorlib %{perl_sitearch}/../}} + +Summary: Samba SMB server. +Name: %{pkg_name}%{samba_major} +%if %have_pversion && %have_pre +Version: %{pre_ver} +%define source_ver %{pversion} +%endif +%if %have_pversion && !%have_pre +Version: %{pversion} +%define source_ver %{pversion} +%endif +%if !%have_pversion +Version: %{ver} +%define source_ver %{ver} +%endif +%if %have_prelease && !%have_pre +Release: 1.%{prelease}mdk +%endif +%if %have_prelease && %have_pre +Release: 0.%{pre_pre}.%{prelease}mdk +%endif +%if !%have_prelease +Release: %{rel} +%endif +License: GPL +Group: System/Servers +Source: ftp://samba.org/pub/samba/samba-%{source_ver}.tar.bz2 +URL: http://www.samba.org +Source1: samba.log +Source2: mount.smb +Source3: samba.xinetd +Source4: swat_48.xpm.bz2 +Source5: swat_32.xpm.bz2 +Source6: swat_16.xpm.bz2 +Source7: README.%{name}-mandrake-rpm +%if %build_vscan +Source8: samba-vscan-%{vscanver}.tar.bz2 +%endif +Source10: samba-print-pdf.sh.bz2 +Patch1: smbw.patch.bz2 +Patch2: samba-glibc21.patch.bz2 +#Patch3: network-recycle_bin.patch.bz2 +Patch5: samba-2.2.0-gawk.patch.bz2 +Patch12: samba-2.2.0-buildroot.patch.bz2 +#Patch16: samba-mkdir.patch.bz2 +Patch17: samba-3.0-smbmount-sbin.patch.bz2 +#Patches 20-22 to get packaging synced from 2.2.2 to 3.0 +Patch20: samba-3.0-smb.conf.patch.bz2 +Patch21: samba-3.0-winbind.init.patch.bz2 +Patch22: samba-3.0-system-auth-winbind.patch.bz2 +Patch23: samba-3alpha20-destdir.patch.bz2 +#Patch24: samba-3.0alpha13-installman.patch.bz2 +Patch25: samba-3.0alpha13-config_lang.patch.bz2 +#Patch 26 belongs with 20-22 +Patch26: samba-3.0-smb.init.patch.bz2 +Requires: pam >= 0.64, samba-common = %{version} +BuildRequires: pam-devel autoconf readline-devel +%if %build_acl +BuildRequires: libacl-devel +%endif +%if %build_mdk72 +BuildRequires: cups-devel +%else +BuildRequires: libcups-devel +%endif +%if %build_ldap +BuildRequires: libldap-devel +%endif +%if %build_ads +BuildRequires: libldap-devel krb5-devel +%endif +BuildRoot: %{_tmppath}/%{name}-root +Prefix: /usr +Prereq: /sbin/chkconfig /bin/mktemp /usr/bin/killall +Prereq: fileutils sed /bin/grep + +%description +Samba provides an SMB server which can be used to provide +network services to SMB (sometimes called "Lan Manager") +clients, including various versions of MS Windows, OS/2, +and other Linux machines. Samba also provides some SMB +clients, which complement the built-in SMB filesystem +in Linux. Samba uses NetBIOS over TCP/IP (NetBT) protocols +and does NOT need NetBEUI (Microsoft Raw NetBIOS frame) +protocol. + +Samba-3.0 features working NT Domain Control capability and +includes the SWAT (Samba Web Administration Tool) that +allows samba's smb.conf file to be remotely managed using your +favourite web browser. For the time being this is being +enabled on TCP port 901 via xinetd. SWAT is now included in +it's own subpackage, samba-swat. + +Please refer to the WHATSNEW.txt document for fixup information. +This binary release includes encrypted password support. + +Please read the smb.conf file and ENCRYPTION.txt in the +docs directory for implementation details. + +%if !%build_system +NOTE: This is a prerelease of samba-%{samba_major}, not intended +for production use. If something breaks, file a bug report. +%endif + +%if %build_non_default +WARNING: This RPM was built with command-line options. Please +see README.%{name}-mandrake-rpm in the documentation for +more information. +%endif + +%package server +URL: http://www.samba.org +Summary: Samba (SMB) server programs. +Requires: %{name}-common = %{version} +Group: Networking/Other +Provides: samba +Obsoletes: samba +%if %build_system +Obsoletes: samba-server-ldap +Obsoletes: samba3-server +%else +Provides: samba-server +%endif + +%description server +Samba-server provides a SMB server which can be used to provide +network services to SMB (sometimes called "Lan Manager") +clients. Samba uses NetBIOS over TCP/IP (NetBT) protocols +and does NOT need NetBEUI (Microsoft Raw NetBIOS frame) +protocol. + +Samba-3.0 features working NT Domain Control capability and +includes the SWAT (Samba Web Administration Tool) that +allows samba's smb.conf file to be remotely managed using your +favourite web browser. For the time being this is being +enabled on TCP port 901 via xinetd. SWAT is now included in +it's own subpackage, samba-swat. + +Please refer to the WHATSNEW.txt document for fixup information. +This binary release includes encrypted password support. + +Please read the smb.conf file and ENCRYPTION.txt in the +docs directory for implementation details. + +%if %build_ldap +This package was compiled with LDAP support, which means that +passwords can be stored in LDAP or in smbpasswd files. +To migrate your passwords from smbpasswd into LDAP, try +examples/LDAP/import_smbpasswd.pl using: +%{_datadir}/%{name}/scripts/import_smbpasswd.pl </etc/%{name}/smbpasswd + +Scripts for managing users in LDAP have been added to +%{_datadir}/%{name}/scripts, configuration is in /etc/%{name}/smbldap_conf.pm +%endif + +%if !%build_system +NOTE: This is a prerelease of samba-%{samba_major}, not intended +for production use. If something breaks, file a bug report. +%endif + +%package client +URL: http://www.samba.org +Summary: Samba (SMB) client programs. +Group: Networking/Other +Requires: %{name}-common = %{version} +Obsoletes: smbfs +%if %build_system +Obsoletes: samba3-client +%else +Provides: samba-client +%endif + +%description client +Samba-client provides some SMB clients, which complement the built-in +SMB filesystem in Linux. These allow the accessing of SMB shares, and +printing to SMB printers. + +%if !%build_system +NOTE: This is a prerelease of samba-%{samba_major}, not intended +for production use. If something breaks, file a bug report. +%endif + +%package common +URL: http://www.samba.org +Summary: Files used by both Samba servers and clients. +Group: System/Servers +%if %build_system +Obsoletes: samba-common-ldap +Obsoletes: samba3-common +%else +Provides: samba-common +%endif + +%description common +Samba-common provides files necessary for both the server and client +packages of Samba. + +%if !%build_system +NOTE: This is a prerelease of samba-%{samba_major}, not intended +for production use. If something breaks, file a bug report. +%endif + +%package doc +URL: http://www.samba.org +Summary: Documentation for Samba servers and clients. +Group: System/Servers +Requires: %{name}-common = %{version} +%if %build_system +Obsoletes: samba3-doc +%else +Provides: samba-doc +%endif + +%description doc +Samba-doc provides documentation files for both the server and client +packages of Samba. + +%if !%build_system +NOTE: This is a prerelease of samba-%{samba_major}, not intended +for production use. If something breaks, file a bug report. +%endif + +%package swat +URL: http://www.samba.org +Summary: The Samba Web Administration Tool. +Requires: %{name}-server = %{version} +Requires: xinetd +Group: System/Servers +%if %build_system +Obsoletes: samba-swat-ldap +Obsoletes: samba3-swat +%else +Provides: samba-swat +%endif + +%description swat +SWAT (the Samba Web Administration Tool) allows samba's smb.conf file +to be remotely managed using your favourite web browser. For the time +being this is being enabled on TCP port 901 via xinetd. Note that +SWAT does not use SSL encryption, nor does it preserve comments in +your smb.conf file. Webmin uses SSL encryption by default, and +preserves comments in configuration files, even if it does not display +them, and is therefore the preferred method for remotely managing +Samba. + +%if !%build_system +NOTE: This is a prerelease of samba-%{samba_major}, not intended +for production use. If something breaks, file a bug report. +%endif + +%if %build_winbind +%package winbind +URL: http://www.samba.org +Summary: Samba-winbind daemon, utilities and documentation +Group: System/Servers +Requires: %{name}-common = %{version} +%description winbind +Provides the winbind daemon and testing tools to allow authentication +and group/user enumeration from a Windows or Samba domain controller. +%endif + +%if !%build_system +NOTE: This is a prerelease of samba-%{samba_major}, not intended +for production use. If something breaks, file a bug report. +%endif + +%if %build_wins +%package -n nss_wins%{samba_major} +URL: http://www.samba.org +Summary: Name Service Switch service for WINS +Group: System/Servers +Requires: %{name}-common = %{version} +PreReq: glibc +%description -n nss_wins%{samba_major} +Provides the libnss_wins shared library which resolves NetBIOS names to +IP addresses. +%endif + +%if !%build_system +NOTE: This is a prerelease of samba-%{samba_major}, not intended +for production use. If something breaks, file a bug report. +%endif + +#Antivirus packages: +%if %build_fprot +%package vscan-fprot +Summary: On-access virus scanning for samba using FPROT +Group: System/Servers +Requires: %{name}-server = %{version} +Autoreq: 0 +%description vscan-fprot +A vfs-module for samba to implement on-access scanning using the +FPROT antivirus software (which must be installed to use this). +%endif + +%if %build_kaspersky +%package vscan-kaspersky +Summary: On-access virus scanning for samba using Kaspersky +Group: System/Servers +Requires: %{name}-server = %{version} +Autoreq: 0 +%description vscan-kaspersky +A vfs-module for samba to implement on-access scanning using the +Kaspersky antivirus software (which must be installed to use this). +%endif + +%if %build_mks +%package vscan-mks +Summary: On-access virus scanning for samba using MKS +Group: System/Servers +Requires: %{name}-server = %{version} +Autoreq: 0 +%description vscan-mks +A vfs-module for samba to implement on-access scanning using the +MKS antivirus software (which must be installed to use this). +%endif + +%if %build_openantivirus +%package vscan-openantivirus +Summary: On-access virus scanning for samba using OpenAntivirus +Group: System/Servers +Requires: %{name}-server = %{version} +Autoreq: 0 +%description vscan-openantivirus +A vfs-module for samba to implement on-access scanning using the +OpenAntivirus antivirus software (which must be installed to use this). +%endif + +%if %build_sophos +%package vscan-sophos +Summary: On-access virus scanning for samba using Sophos +Group: System/Servers +Requires: %{name}-server = %{version} +Autoreq: 0 +%description vscan-sophos +A vfs-module for samba to implement on-access scanning using the +Sophos antivirus software (which must be installed to use this). +%endif + +%if %build_symantec +%package vscan-symantec +Summary: On-access virus scanning for samba using Symantec +Group: System/Servers +Requires: %{name}-server = %{version} +Autoreq: 0 +%description vscan-symantec +A vfs-module for samba to implement on-access scanning using the +Symantec antivirus software (which must be installed to use this). +%endif + +%if %build_trend +%package vscan-trend +Summary: On-access virus scanning for samba using Trend +Group: System/Servers +Requires: %{name}-server = %{version} +Autoreq: 0 +%description vscan-trend +A vfs-module for samba to implement on-access scanning using the +Trend antivirus software (which must be installed to use this). +%endif + +%prep +# Build a summary of how this RPM was built: +%if %build_acl +RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with acl" +%else +RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without acl" +%endif +%if %build_winbind +RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with winbind" +%else +RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without winbind" +%endif +%if %build_wins +RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with wins" +%else +RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without wins" +%endif +%if %build_ldap +RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with ldap" +%else +RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without ldap" +%endif +%if %build_ads +RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --with ads" +%else +RPM_EXTRA_OPTIONS="$RPM_EXTRA_OPTIONS --without ads" +%endif + +%if %build_non_default +echo "Building a non-default rpm with the following command-line arguments:" +echo "$RPM_EXTRA_OPTIONS" +echo "This rpm was built with non-default options, thus, to build ">%{SOURCE7} +echo "an identical rpm, you need to supply the following options">>%{SOURCE7} +echo "at build time: $RPM_EXTRA_OPTIONS">>%{SOURCE7} +echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7} +%else +echo "This rpm was built with default options">%{SOURCE7} +echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7} +%endif + +%if %build_vscan +%setup -q -a 8 -n %{pkg_name}-%{source_ver} +%else +%setup -q -n %{pkg_name}-%{source_ver} +%endif +#%patch111 -p1 +%patch1 -p1 -b .smbw +#%patch3 -p1 -b .net-r_bin +%patch5 -p1 -b .gawk +#%patch6 -p1 +%patch12 -p1 -b .buildroot +%patch17 -p1 -b .sbin +%patch20 -p1 -b .samba222 +%patch21 -p1 -b .samba222 +%patch22 -p1 -b .samba222 +%patch23 -p1 -b .destdir +#%patch24 -p1 -b .langen +%patch25 -p1 -b .multilang +%patch26 -p1 -b .samba222 +cp %{SOURCE7} . + +# Make a copy of examples so that we have a clean one for doc: +cp -a examples examples.bin + +%if %build_vscan +# put antivirus files in examples.bin/VFS/ +for av in fprot kaspersky mks openantivirus sophos symantec trend; do + cp -a %{vscandir}/$av %{vfsdir} +done +%endif + +# Edit some files when not building system samba: +%if !%build_system +perl -pi -e 's/%{pkg_name}/%{name}/g' source/auth/pampass.c +%endif + +%build +#%serverbuild +(cd source +autoconf +CPPFLAGS="-I/usr/include/openssl"; export CPPFLAGS +CFLAGS="$RPM_OPT_FLAGS" +%configure --prefix=%{_prefix} \ + --with-fhs \ + --libdir=/etc/%{name} \ + --sysconfdir=/etc/%{name} \ + --localstatedir=/var \ + --with-configdir=/etc/%{name} \ + --with-codepagedir=/var/lib/%{name}/codepages \ + --with-privatedir=/etc/%{name} \ + --with-swatdir=%{_datadir}/swat%{samba_major} \ + --with-smbmount \ + --with-syslog \ + --with-automount \ + --with-pam \ + --with-vfs \ + --with-utmp \ + --with-msdfs \ + --with-smbwrapper \ + --with-manpages-langs=en \ + --with-logfilebase=/var/log/%{name} \ + --with-lockdir=/var/cache/%{name} \ + --with-piddir=/var/run/%{name} \ +%if !%build_system + --program-suffix=%{samba_major} \ +%endif +%if %build_acl + --with-acl-support \ +%endif +%if !%build_ldap + --with-ldap=no \ +%endif +%if !%build_ads + --with-ads=no \ +%endif + --with-quotas +# --with-pam_smbpass \ +# --with-manpages-langs=en,ja,pl \ + +#make CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE" all +make CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE" \ + all smbfilter smbwrapper smbcacls pam_smbpass nsswitch nsswitch/libnss_wins.so debug2html +# Build VFS modules (experimental) +cd ../%vfsdir +%configure --prefix=%{prefix} \ + --mandir=%{prefix}/share/man +make +#make CFLAGS="$RPM_OPT_FLAGS -I../../source -I../../source/include -I../../source/ubiqx \ +# -I../../source/smbwrapper -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE" +) + +# Build mkntpasswd in examples/LDAP/ for smbldaptools +( +cd examples.bin/LDAP/smbldap-tools/mkntpwd +make +) + +# Build antivirus vfs objects: +%if %build_fprot +echo "Building fprot" +%endif +%if %build_kaspersky +echo "Building Kaspersky" +(cd %{vfsdir}/kaspersky;make) +%endif +%if %build_mks +echo "Building mks" +(cd %{vfsdir}/mks;make) +%endif +%if %build_openantivirus +echo "Building OpenAntivirus" +(cd %{vfsdir}/openantivirus;make) +%endif +%if %build_sophos +echo "building sophos" +(cd %{vfsdir}/sophos;make) +%endif +%if %build_symantec +echo "Building symantec" +(cd %{vfsdir}/symantec;make) +%endif +%if %build_trend +echo "Building Trend" +(cd %{vfsdir}/trend;make) +%endif + +%install +rm -rf $RPM_BUILD_ROOT +mkdir -p $RPM_BUILD_ROOT + +# Any entries here mean samba makefile is *really* broken: +mkdir -p $RPM_BUILD_ROOT/etc/%{name} +mkdir -p $RPM_BUILD_ROOT/%{_datadir} + +(cd source +make DESTDIR=$RPM_BUILD_ROOT install) + +#need to stay +mkdir -p $RPM_BUILD_ROOT/sbin +mkdir -p $RPM_BUILD_ROOT/etc/{logrotate.d,pam.d,xinetd.d} +mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d +mkdir -p $RPM_BUILD_ROOT/var/cache/%{name} +mkdir -p $RPM_BUILD_ROOT/var/log/%{name} +mkdir -p $RPM_BUILD_ROOT/var/run/%{name} +mkdir -p $RPM_BUILD_ROOT/var/spool/%{name} +mkdir -p $RPM_BUILD_ROOT/var/lib/%{name}/{netlogon,profiles,printers} +mkdir -p $RPM_BUILD_ROOT/var/lib/%{name}/printers/{W32X86,WIN40,W32ALPHA,W32MIPS,W32PPC} +mkdir -p $RPM_BUILD_ROOT/var/lib/%{name}/codepages/src +mkdir -p $RPM_BUILD_ROOT/lib/security +mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib +mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs +mkdir -p $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts + +#smbwrapper and pam_winbind not handled by make, pam_smbpass.so doesn't build +install -m 755 source/bin/smbwrapper.so $RPM_BUILD_ROOT%{_libdir}/smbwrapper%{samba_major}.so +#install -m 755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/lib/security/pam_smbpass.so +install -m 755 source/nsswitch/pam_winbind.so $RPM_BUILD_ROOT/lib/security/pam_winbind%{samba_major}.so + +# Install VFS modules +#install -m755 %vfsdir/audit.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs +#for i in block recycle +#do +# install -m755 %vfsdir/$i/$i.so $RPM_BUILD_ROOT/%{_libdir}/samba/vfs +#done + +# Antivirus support: +# mkdir -p $RPM_BUILD_ROOT%{_libdir}/samba/vfs/vscan + for av in fprotd kavp mksd oav sophos symantec trend; do + if [ -d %{vfsdir}/$av -a -e %{vfsdir}/$av/vscan-$av.so ];then + cp %{vfsdir}/$av/vscan-$av.so \ + $RPM_BUILD_ROOT%{_libdir}/samba/vfs/ + fi + done + +#These scripts are not handled by make: +#for i in addtosmbpass mksmbpasswd.sh smbtar convert_smbpasswd +for i in addtosmbpass mksmbpasswd.sh convert_smbpasswd +do + install -m755 source/script/$i $RPM_BUILD_ROOT/%{_bindir} +done + +#libnss_* not handled by make: +# Install the nsswitch library extension file +for i in wins winbind; do + install -m755 source/nsswitch/libnss_${i}.so $RPM_BUILD_ROOT/lib/libnss_${i}%{samba_major}.so +done +# Make link for wins and winbind resolvers +( cd $RPM_BUILD_ROOT/lib; ln -s libnss_wins%{samba_major}.so libnss_wins%{samba_major}.so.2; ln -s libnss_winbind%{samba_major}.so libnss_winbind%{samba_major}.so.2) + +# Install other stuff + +# install -m644 examples/VFS/recycle/recycle.conf $RPM_BUILD_ROOT/etc/samba/ + install -m644 packaging/Mandrake/smb.conf $RPM_BUILD_ROOT/etc/%{name}/smb.conf + install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT/etc/%{name}/smbusers + install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT/%{_bindir} + #install -m755 packaging/RedHat/smbadduser $RPM_BUILD_ROOT/usr/bin + install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT/%{_bindir} + install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/etc/rc.d/init.d/smb%{samba_major} + install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_sbindir}/%{name} + install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/etc/rc.d/init.d/winbind%{samba_major} + install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_sbindir}/winbind%{samba_major} + install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/etc/pam.d/%{name} + install -m644 packaging/Mandrake/system-auth-winbind.pamd $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major} +# + install -m644 $RPM_SOURCE_DIR/samba.log $RPM_BUILD_ROOT/etc/logrotate.d/%{name} +# install -m644 packaging/Mandrake/samba-slapd-include.conf $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/samba-slapd.include + +# Install smbldap-tools scripts: +#for i in examples/LDAP/smbldap-tools/*.pl; do +# install -m 750 $i $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ +#done + +#install -m 750 examples/LDAP/smbldap-tools/smbldap_tools.pm $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ + +# The conf file +#install -m 640 examples/LDAP/smbldap-tools/smbldap_conf.pm $RPM_BUILD_ROOT/%{_sysconfdir}/%{name} + +# Link both smbldap*.pm into vendor-perl (any better ideas?) +#mkdir -p %{buildroot}/%{perl_vendorlib} +#ln -s %{_sysconfdir}/%{name}/smbldap_conf.pm $RPM_BUILD_ROOT/%{perl_vendorlib} +#ln -s %{_datadir}/%{name}/scripts/smbldap_tools.pm $RPM_BUILD_ROOT/%{perl_vendorlib} + +#mkntpwd +#install -m750 examples.bin/LDAP/smbldap-tools/mkntpwd/mkntpwd %{buildroot}/%{_sbindir} + +# Samba smbpasswd migration script: +install -m700 examples/LDAP/export_smbpasswd.pl $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ +install -m700 examples/LDAP/import_smbpasswd.pl $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ + + + +# make a conf file for winbind from the default one: + cat packaging/Mandrake/smb.conf|sed -e 's/^; winbind/ winbind/g;s/^; obey pam/ obey pam/g; s/^; printer admin = @"D/ printer admin = @"D/g;s/^; password server = \*/ password server = \*/g;s/^; template/ template/g; s/^ security = user/ security = domain/g' > packaging/Mandrake/smb-winbind.conf + install -m644 packaging/Mandrake/smb-winbind.conf $RPM_BUILD_ROOT/etc/%{name}/smb-winbind.conf + +# Link smbmount to /sbin/mount.smb and /sbin/mount.smbfs +#I don't think it's possible for make to do this ... + ln -s $RPM_BUILD_ROOT/%{_bindir}/smbmount%{samba_major} $RPM_BUILD_ROOT/sbin/mount.smb%{samba_major} + ln -s $RPM_BUILD_ROOT/%{_bindir}/smbmount%{samba_major} $RPM_BUILD_ROOT/sbin/mount.smbfs%{samba_major} + echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/etc/%{name}/lmhosts + +# Link smbspool to CUPS (does not require installed CUPS) + + mkdir -p $RPM_BUILD_ROOT/%{_libdir}/cups/backend + ln -s %{_bindir}/smbspool $RPM_BUILD_ROOT/%{_libdir}/cups/backend/smb%{samba_major} + +# xinetd support + + mkdir -p $RPM_BUILD_ROOT/etc/xinetd.d + install -m644 %{SOURCE3} $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major} + +# menu support + +mkdir -p $RPM_BUILD_ROOT%{_menudir} +cat > $RPM_BUILD_ROOT%{_menudir}/%{name} << EOF +?package(%{name}):command="gnome-moz-remote http://localhost:901/" needs="gnome" \ +icon="swat%{samba_major}.xpm" section="Configuration/Networking" title="Samba Configuration" \ +longtitle="The Swat Samba Administration Tool" +?package(%{name}):command="sh -c '\$BROWSER http://localhost:901/'" needs="x11" \ +icon="swat%{samba_major}.xpm" section="Configuration/Networking" title="Samba Configuration" \ +longtitle="The Swat Samba Administration Tool" +EOF + +mkdir -p $RPM_BUILD_ROOT%{_liconsdir} $RPM_BUILD_ROOT%{_iconsdir} $RPM_BUILD_ROOT%{_miconsdir} + +bzcat %{SOURCE4} > $RPM_BUILD_ROOT%{_liconsdir}/swat%{samba_major}.xpm +bzcat %{SOURCE5} > $RPM_BUILD_ROOT%{_iconsdir}/swat%{samba_major}.xpm +bzcat %{SOURCE6} > $RPM_BUILD_ROOT%{_miconsdir}/swat%{samba_major}.xpm + +bzcat %{SOURCE10}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/print-pdf + +# Fix configs when not building system samba: +%if !%build_system +# Work around non-existent but claimed --program-suffix support :-( +for dir in %{_sbindir} %{_bindir};do + FILES=`find %{buildroot}$dir -type f |grep -v "\."|grep -v %{samba_major}$` + for OLD in $FILES; do + NEW=`echo ${OLD}%{samba_major}` + mv $OLD $NEW + done +done +# And the man pages too: +FILES=`find %{buildroot}%{_mandir} -type f ` +for OLD in $FILES; do + BASE=`perl -e '$name="'${OLD}'"; print "",($name =~ /(.*?)\.[0-9]/), "\n";'` + EXT=`echo $OLD|sed -e 's,'${BASE}',,g'` + NEW=`echo ${BASE}%{samba_major}${EXT}` + mv $OLD $NEW +done +# Replace paths in config files and init scripts: +for i in smb winbind;do + perl -pi -e 's,/subsys/'$i',/subsys/'$i'%{samba_major},g' $RPM_BUILD_ROOT/etc/rc.d/init.d/${i}%{samba_major} +done +for i in /etc/%{name}/smb.conf /etc/rc.d/init.d/smb%{samba_major} %{_sbindir}/%{name} /etc/rc.d/init.d/winbind%{samba_major} %{_sbindir}/winbind%{samba_major} /etc/logrotate.d/%{name} /etc/xinetd.d/swat%{samba_major}; do + perl -pi -e 's,/%{pkg_name},/%{name},g; s,smbd,%{_sbindir}/smbd%{samba_major},g; s,nmbd,%{_sbindir}/nmbd%{samba_major},g; s,winbindd,%{_sbindir}/winbindd%{samba_major},g; s,/usr/sbin/swat,%{_sbindir}/swat%{samba_major},g' $RPM_BUILD_ROOT/$i; +done +# Fix pam files +perl -pi -e 's/winbind/winbind%{samba_major}/g' $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major} +# Fix xinetd file for swat: +perl -pi -e 's,/usr/sbin,%{_sbindir},g' $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major} +%endif + +%clean +rm -rf $RPM_BUILD_ROOT + +%post server + +/sbin/chkconfig --level 35 smb%{samba_major} on + +# Add a unix group for samba machine accounts +groupadd -frg 421 machines + +# Migrate tdb's from /var/lock/samba (taken from official samba spec file): +for i in /var/lock/samba/*.tdb +do +if [ -f $i ]; then + newname=`echo $i | sed -e's|var\/lock\/samba|var\/cache\/samba|'` + echo "Moving $i to $newname" + mv $i $newname +fi +done + +# Remove the transient tdb files (modified from version in off. samba spec: +for TDB in brlock unexpected locking messages; do + if [ -e /var/cache/%{name}/$TDB.tdb ]; then + rm -f /var/cache/%{name}/$TDB.tdb; + fi; +done + +if [ -d /var/lock/samba ]; then + rm -rf /var/lock/samba +fi + +%post common +# Basic migration script for pre-2.2.1 users, +# since smb config moved from /etc to /etc/samba + +# Let's create a proper /etc/samba/smbpasswd file +[ -f /etc/%{name}/smbpasswd ] || { + echo "Creating password file for samba..." + touch /etc/%{name}/smbpasswd +} + +# And this too, in case we don't have smbd to create it for us +[ -f /var/cache/%{name}/unexpected.tdb ] || { + touch /var/cache/%{name}/unexpected.tdb +} + +# Let's define the proper paths for config files +perl -pi -e 's/(\/etc\/)(smb)/\1%{name}\/\2/' /etc/%{name}/smb.conf + +# Fix the logrotate.d file from smb and nmb to smbd and nmbd +if [ -f /etc/logrotate.d/samba ]; then + perl -pi -e 's/smb /smbd /' /etc/logrotate.d/samba + perl -pi -e 's/nmb /nmbd /' /etc/logrotate.d/samba +fi + +# And not loose our machine account SID +[ -f /etc/MACHINE.SID ] && mv -f /etc/MACHINE.SID /etc/%{name}/ ||: + +%if %build_winbind +%post winbind +if [ $1 = 1 ]; then + /sbin/chkconfig winbind%{samba_major} on + cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave + cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp + for i in passwd group;do + grep ^$i /etc/nsswitch.conf |grep -v 'winbind%{samba_major}' >/dev/null + if [ $? = 0 ];then + echo "Adding a winbind%{samba_major} entry to the $i section of /etc/nsswitch.conf" + awk '/^'$i'/ {print $0 " winbind%{samba_major}"};!/^'$i'/ {print}' /etc/nsswitch.conf.rpmtemp >/etc/nsswitch.conf; + cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp + else + echo "$i entry found in /etc/nsswitch.conf" + fi + done + if [ -f /etc/nsswitch.conf.rpmtemp ];then rm -f /etc/nsswitch.conf.rpmtemp;fi +fi + +%preun winbind +if [ $1 = 0 ]; then + echo "Removing winbind%{samba_major} entries from /etc/nsswitch.conf" + perl -pi -e 's/ winbind%{samba_major}//' /etc/nsswitch.conf + + /sbin/chkconfig winbind%{samba_major} reset +fi +%endif %build_winbind + +%if %build_wins +%post -n nss_wins%{samba_major} +if [ $1 = 1 ]; then + cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave + grep '^hosts' /etc/nsswitch.conf |grep -v 'wins%{samba_major}' >/dev/null + if [ $? = 0 ];then + echo "Adding a wins entry to the hosts section of /etc/nsswitch.conf" + awk '/^hosts/ {print $0 " wins%{samba_major}"};!/^hosts/ {print}' /etc/nsswitch.conf.rpmsave >/etc/nsswitch.conf; + else + echo "wins entry found in /etc/nsswitch.conf" + fi +# else +# echo "Upgrade, leaving nsswitch.conf intact" +fi + +%preun -n nss_wins%{samba_major} +if [ $1 = 0 ]; then + echo "Removing wins entry from /etc/nsswitch.conf" + perl -pi -e 's/ wins%{samba_major}//' /etc/nsswitch.conf +#else +# echo "Leaving /etc/nsswitch.conf intact" +fi +%endif %build_wins + +%preun + +/sbin/chkconfig --level 35 smb%{samba_major} reset + +if [ $1 = 0 ] ; then +%_preun_service smb%{samba_major} +# /sbin/chkconfig --level 35 smb reset +# Let's not loose /var/cache/samba + +# for i in browse.dat wins.dat brlock.tdb unexpected.tdb connections.tdb \ +#locking.tdb messages.tdb;do +# if [ -e /var/cache/samba/$i ]; then +# mv -f /var/cache/samba/$i /var/cache/samba/$i.BAK +# fi; +# done + if [ -d /var/log/%{name} ]; then + rm -rf /var/log/%{name}/* + fi + if [ -d /var/cache/%{name} ]; then + mv -f /var/cache/%{name} /var/cache/%{name}.BAK + fi +fi + +%post swat +if [ -f /var/lock/subsys/xinetd ]; then + service xinetd reload >/dev/null 2>&1 || : +fi +%update_menus + +%postun swat + +# Remove swat entry from xinetd +if [ $1 = 0 -a -f /etc/xinetd.conf ] ; then +rm -f /etc/xinetd.d/swat%{samba_major} + service xinetd reload &>/dev/null || : +fi + +if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi + +%clean_menus + +%triggerpostun -- samba < 1.9.18p7 + +if [ $1 != 0 ]; then + /sbin/chkconfig --level 35 smb on +fi + +%triggerpostun -- samba < 2.0.5a-3, samba >= 2.0.0 + +if [ $1 != 0 ]; then + [ ! -d /var/lock/samba ] && mkdir -m 0755 /var/lock/samba ||: + [ ! -d /var/spool/samba ] && mkdir -m 1777 /var/spool/samba ||: + [ -f /etc/inetd.conf ] && chmod 644 /etc/services /etc/inetd.conf ||: +fi + +%files server +%defattr(-,root,root) +#%attr(-,root,root) /sbin/* +%{_sbindir}/%{name} +%{_sbindir}/smbd%{samba_major} +%{_sbindir}/nmbd%{samba_major} +#%{_sbindir}/smbcontrol +#%{_sbindir}/mkntpwd +#%{prefix}/bin/addtosmbpass +%{_bindir}/mksmbpasswd.sh +%{_bindir}/smbstatus%{samba_major} +%{_bindir}/convert_smbpasswd%{samba_major} +%{_bindir}/pdbedit%{samba_major} +%{_bindir}/smbgroupedit%{samba_major} +#%attr(755,root,root) /lib/security/pam_smbpass* +#/usr/share/swat +%attr(-,root,root) %config(noreplace) /etc/%{name}/smbusers +%attr(-,root,root) %config /etc/rc.d/init.d/smb%{samba_major} +%attr(-,root,root) %config(noreplace) /etc/logrotate.d/%{name} +%attr(-,root,root) %config(noreplace) /etc/pam.d/%{name} +#%attr(-,root,root) %config(noreplace) /etc/%{name}/samba-slapd.include +%{_mandir}/man1/smbstatus*.1* +%{_mandir}/man5/smbpasswd*.5* +%{_mandir}/man7/samba*.7* +%{_mandir}/man8/smbd*.8* +%{_mandir}/man8/nmbd*.8* +%{_mandir}/man1/smbcontrol*.1* +%{_mandir}/man5/lmhosts*.5* +%{_mandir}/man5/smb.conf*.5* +%attr(775,root,root) %dir /var/lib/%{name}/netlogon +%attr(775,root,root) %dir /var/lib/%{name}/profiles +%attr(775,root,root) %dir /var/lib/%{name}/printers/* +%dir /var/cache/%{name} +%dir /var/log/%{name} +%attr(1777,root,root) %dir /var/spool/%{name} +%dir %{_datadir}/%{name}/scripts +#%attr(0755,root,root) %{_datadir}/%{name}/scripts/print-pdf +#%attr(0750,root,root) %{_datadir}/%{name}/scripts/smbldap*.pl +#%attr(0640,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smbldap_conf.pm +#%attr(0644,root,root) %{_datadir}/%{name}/scripts/smbldap_tools.pm +#%{perl_vendorlib}/*.pm +%attr(0700,root,root) %{_datadir}/%{name}/scripts/*port_smbpasswd.pl + + +%files doc +%defattr(-,root,root) +%doc README COPYING Manifest Read-Manifest-Now +%doc WHATSNEW.txt Roadmap +%doc README.%{name}-mandrake-rpm +%doc docs +%doc examples +%doc swat/README +%attr(-,root,root) %{_datadir}/swat%{samba_major}/using_samba/* + +%files swat +%defattr(-,root,root) +%config(noreplace) /etc/xinetd.d/swat%{samba_major} +#%attr(-,root,root) /sbin/* +%{_sbindir}/swat%{samba_major} +%{_menudir}/%{name} +%{_miconsdir}/*.xpm +%{_liconsdir}/*.xpm +%{_iconsdir}/*.xpm +%attr(-,root,root) %{_datadir}/swat%{samba_major}/help/* +%attr(-,root,root) %{_datadir}/swat%{samba_major}/images/* +%attr(-,root,root) %{_datadir}/swat%{samba_major}/include/* +%{_mandir}/man8/swat*.8* + +%files client +%defattr(-,root,root) +%ifnarch alpha +/sbin/mount.smb%{samba_major} +/sbin/mount.smbfs%{samba_major} +%attr(755,root,root) %{_bindir}/smbmount%{samba_major} +%attr(4755,root,root) %{_bindir}/smbumount%{samba_major} +#%attr(4755,root,root) %{_sbindir}/smbmnt +%{_mandir}/man8/smbmnt*.8* +%{_mandir}/man8/smbmount*.8* +%{_mandir}/man8/smbumount*.8* +%endif +%{_bindir}/nmblookup%{samba_major} +%{_bindir}/findsmb%{samba_major} +%{_bindir}/smbclient%{samba_major} +%{_bindir}/smbprint%{samba_major} +%{_bindir}/smbtar%{samba_major} +%{_bindir}/smbspool%{samba_major} +# Link of smbspool to CUPS +/%{_libdir}/cups/backend/smb%{samba_major} +/%{_mandir}/man1/nmblookup*.1* +/%{_mandir}/man1/findsmb*.1* +/%{_mandir}/man1/smbclient*.1* +/%{_mandir}/man1/smbtar*.1* + +%files common +%defattr(-,root,root) +%dir /var/cache/%{name} +%dir /var/log/%{name} +%dir /var/run/%{name} +#%{_bindir}/make_smbcodepage +#%{_bindir}/make_unicodemap +%{_bindir}/testparm%{samba_major} +%{_bindir}/testprns%{samba_major} +#%{_bindir}/make_printerdef +%{_bindir}/rpcclient%{samba_major} +%{_bindir}/smbsh%{samba_major} +%{_bindir}/smbpasswd%{samba_major} +%{_bindir}/net%{samba_major} +%{_bindir}/smbtree%{samba_major} +%{_libdir}/smbwrapper%{samba_major}.so +%attr(-,root,root) %config(noreplace) /etc/%{name}/smb.conf +%attr(-,root,root) %config(noreplace) /etc/%{name}/smb-winbind.conf +%attr(-,root,root) %config(noreplace) /etc/%{name}/lmhosts +%attr(-,root,root) /var/lib/%{name}/codepages +%{_mandir}/man1/make_smbcodepage*.1* +%{_mandir}/man1/make_unicodemap*.1* +%{_mandir}/man1/testparm*.1* +%{_mandir}/man1/smbsh*.1* +%{_mandir}/man1/testprns*.1* +%{_mandir}/man5/smb.conf*.5* +%{_mandir}/man5/lmhosts*.5* +%{_mandir}/man8/smbpasswd*.8* +/%{_mandir}/man1/smbcacls*.1* + +%if %build_winbind +%files winbind +%defattr(-,root,root) +%{_sbindir}/winbindd%{samba_major} +%{_bindir}/wbinfo%{samba_major} +%attr(755,root,root) /lib/security/pam_winbind* +%attr(755,root,root) /lib/libnss_winbind%{samba_major}* +%attr(-,root,root) %config /etc/rc.d/init.d/winbind%{samba_major} +%attr(-,root,root) %config(noreplace) /etc/pam.d/system-auth-winbind* +%{_mandir}/man8/winbindd*.8* +%{_mandir}/man1/wbinfo*.1* +%endif + +%if %build_wins +%files -n nss_wins%{samba_major} +%defattr(-,root,root) +%attr(755,root,root) /lib/libnss_wins%{samba_major}.so* +%endif + +#Files for antivirus support: +%if %build_fprot +%files vscan-fprot +%defattr(-,root,root) +%{_libdir}/%{name}/vfs/vscan-fprotd.so +%doc examples.bin/VFS/fprot/INSTALL +%endif + +%if %build_kaspersky +%files vscan-kaspersky +%defattr(-,root,root) +%{_libdir}/%{name}/vfs/vscan-kavp.so +%doc examples.bin/VFS/kaspersky/INSTALL +%endif + +%if %build_mks +%files vscan-mks +%defattr(-,root,root) +%{_libdir}/%{name}/vfs/vscan-mksd.so +%doc examples.bin/VFS/mks/INSTALL +%endif + +%if %build_openantivirus +%files vscan-openantivirus +%defattr(-,root,root) +%{_libdir}/%{name}/vfs/vscan-oav.so +%doc examples.bin/VFS/openantivirus/INSTALL +%endif + +%if %build_sophos +%files vscan-sophos +%defattr(-,root,root) +%{_libdir}/%{name}/vfs/vscan-sophos.so +%doc examples.bin/VFS/sophos/INSTALL +%endif + +%if %build_symantec +%files vscan-symantec +%defattr(-,root,root) +%{_libdir}/%{name}/vfs/vscan-symantec.so +%doc examples.bin/VFS/symantec/INSTALL +%endif + +%if %build_trend +%files vscan-trend +%defattr(-,root,root) +%{_libdir}/%{name}/vfs/vscan-trend.so +%doc examples.bin/VFS/trend/INSTALL +%endif + +%changelog +* Mon Oct 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.3mdk +- Fix mount.smbfs3 pointing to smbmount not in package +- Remove unnecessary lines from install (now done by make) +- Build with ldap and ads on all releases by default +- Put av-stuff back + +* Mon Oct 21 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.2mdk +- When not building as system samba, avoid conflicting with system samba +- Macro-ize as much as possible for above (aka finish cleanups) +- Fix paths in init scripts and logrotate and xinetd +- Fix provides and obsoletes so as to provide samba, but not obsolete + current stable until we have a stable release (when it's the system samba). +- Add warnings to descriptions when not system samba. +- This is now parallel installable with the normal samba release, for easy + testing. It shouldn't touch existing installations. Of course, only + one samba at a time on the same interface! + +* Sat Sep 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.1mdk +- Merge with 2.2.6pre2.2mdk +- Detect alpha- and beta-, along with pre-releases + +* Tue Feb 05 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.1mdk +- Sync with 2.2.3-2mdk (new --without options, detect when + building for a different distribution. + +* Mon Feb 04 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.0mdk +- Sync with 2.2.2-10mdk, which added build-time options --with ldap, + winbind, acl, wins, mdk72, mdk80, mdk81, mdk82, cooker. Added + warning in description if built with these options. + +* Wed Jan 23 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.2mdk +- Added %%if's for build_ads, which hopefully will add Active Directory + Support (by request). + +* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.1mdk +- More syncing with 2.2 rpm (post and postun scripts) +- Testing without ldap + +* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.0mdk +- 3.0-alpha13 +- Fixed installman.sh patch. + +* Wed Jan 09 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.1mdk +- Fixed %post and %preun for nss_wins, added %post and %preun for + samba-winbind (chkconfig and winbind entries in nsswitch.conf) + +* Sun Dec 23 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.0mdk +- 3.0-alpha12 +- Sync up with changes made in 2.2.2 to support Mandrake 8.0, 7.2 +- Added new subpackage for swat +- More %if's for ldap. + +* Thu Dec 20 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha11-0.0mdk +- 3.0-alpha11 + +* Wed Dec 19 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha10-0.0mdk +- 3.0-alpha10 + +* Tue Dec 18 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha9-0.0mdk +- 3.0-alpha9 + +* Mon Dec 17 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.1mdk +- Added net command to %files common, pdbedit and smbgroupedit to + %files, s/%{prefix}\/bin/%{_bindir}/ (the big cleanup). + Added patch to smb.init from 2.2.2 (got missed with 3.0-alpha1 patches) + +* Sun Dec 16 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.0mdk +- Patch for installman.sh to handle lang=en correctly (p24) +- added --with-manpages-langs=en,ja,pl (translated manpages), but there + aren't any manpages for these languages yet ... so we still + need %dir and %doc entries for them ... +- patch (p25) to configure.in to support more than 2 languages. +- addtosmbpass seems to have returned for now, but make_* have disappeared! + +* Fri Dec 14 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha6-0.0mdk +- DESTDIR patch for Makefile.in (p23), remove a lot of %install scripts + this forces move of smbcontrol and smbmnt to %{prefix}/bin + removed --with-pam_smbpass as it doesn't compile. + +* Thu Dec 06 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-0.0alpha1mdk +- Samba 3.0alpha1 released (we missed Samba 3.0alpha0!) +- Redid smbmount-sbin patch and smb.conf patch (20), removed xfs quota patch + (applied upstream), removed ook-patch (codepage directory totally different). +- Added winbind.init (21) and system-auth-winbind.pamd (22). Patches 20-23 + should be applied upstream before 3.0 ships ... + +* Wed Dec 05 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-6mdk +- fixed typo in system-auth-winbind.pamd (--Thanks J. Gluck). +- fixed %post xxx problem (smb not started in chkconfig --Thanks Viet & B. Kenworthy). + +* Fri Nov 23 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-5mdk +- Had to remove the network recycle bin patch: it seems to mess up + file deletion from windows (files appear to be "already in use") + +* Tue Nov 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-4mdk +- added network recycle bin patch: + <http://www.amherst.edu/~bbstone/howto/samba.html> +- added "recycle bin = .recycled" parameter in smb.conf [homes]. +- fixed winbind/nss_wins perms (oh no I don't own that stuff ;o) + +* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-3mdk +- added %build 8.0 and 7.2, for tweakers to play around. +- changed configure options: + . removed --with-mmap, --with-netatalk (obsolete). + . added --with-msdfs, --with-vfs (seems stable, but still need testing). + +* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-2mdk +- rebuilt with winbind and nss_wins enabled. + +* Wed Oct 31 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-1mdk +- Rebuilt on cooker. + +* Wed Oct 31 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.992mdk +- Patch for smb.conf to fix incorrect lpq command, typo in winbind, + and add sample linpopup command. Added print driver directories. +- New XFS quota patch (untested!, samba runs, but do quotas work? We + can't check yet since the kernel doesn't seem to support XFS quotas!) + +* Fri Oct 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-0.99mdk +- New samba.spec, almost ready for winbind operations. OLA for Buchan Milne + Who did a tremendous integration work on 2.2.2. + Rebuild on cooker, please test XFS (ACLs and quotas) again... + +* Mon Oct 15 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.9mdk +- Samba-2.2.2. released! Use %defines to determine which subpackages + are built and which Mandrake release we are buiding on/for (hint: define + build_mdk81 1 for Mandrake 8.1 updates) + +* Sun Oct 14 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011014mdk +- %post and %postun for nss_wins + +* Wed Oct 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011010mdk +- New CVS snapshot, /etc/pam.d/system-auth-winbind added + with configuration to allow easy winbind setup. + +* Sun Oct 7 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011007mdk +- Added new package nss_wins and moved smbpasswd to common (required by + winbind). + +* Sat Oct 6 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011006mdk +- Added new package winbind. + +* Mon Oct 1 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011001mdk +- Removed patch to smb init.d file (applied in cvs) + +* Sun Sep 30 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010930mdk +- Added winbind init script, which still needs to check for running nmbd. + +* Thu Sep 27 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010927mdk +- Built from samba-2.2.2-pre cvs, added winbindd, wbinfo, nss_winbind and + pam_winbind, moved pam_smbpass from samba-common to samba. We still + need a start-up script for winbind, or need to modify existing one. + +* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-15mdk +- Enabled acl support (XFS acls now supported by kernel-2.4.8-21mdk thx Chmou) + Added smbd patch to support XFS quota (Nathan Scott) + +* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-14mdk +- Oops! smbpasswd created in wrong directory... + +* Tue Sep 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-13mdk +- Removed a wrong comment in smb.conf. + Added creation of smbpasswd during install. + +* Mon Aug 27 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-12mdk +- really less verbose %%post + +* Sat Aug 25 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1a-11mdk +- Fix shared libs in /usr/bin silliness. + +* Thu Aug 23 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-10mdk +- less verbose %%post + +* Wed Aug 22 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-9mdk +- Added smbcacls (missing in %files), modification to smb.conf: ([printers] + is still needed, even with point-and-print!, user add script should + use name and not gid, since we may not get the gid . New script for + putting manpages in place (still need to be added in %files!). Moved + smbcontrol to sbin and added it and its man page to %files. + +* Wed Aug 22 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-8mdk +- cleanup /var/lib/samba/codepage/src + +* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-7mdk +- moved codepage generation to %install and codepage dir to /var/lib/samba + +* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-6mdk +- /lib/* was in both samba and samba-common + Introducing samba-doc: "alas, for the sake of thy modem, shalt thou remember + when Samba was under the Megabyte..." + +* Fri Aug 03 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-5mdk +- Added "the gc touch" to smbinit through the use of killall -0 instead of + grep cupsd | grep -v grep (too many greps :o) + +* Wed Jul 18 2001 Stefan van der Eijk <stefan@eijk.nu> 2.2.1a-4mdk +- BuildRequires: libcups-devel +- Removed BuildRequires: openssl-devel + +* Fri Jul 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-3mdk +- replace chkconfig --add/del with --level 35 on/reset. + +* Fri Jul 13 2001 Geoffrey Lee <snailtalk@mandrakesoft.cm> 2.2.1a-2mdk +- Replace discription s/inetd/xinetd/, we all love xinetd, blah. + +* Thu Jul 12 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-1mdk +- Bugfix release. Fixed add user script, added print$ share and printer admin + We need to test interaction of new print support with CUPS, but printer + driver uploads should work. + +* Wed Jul 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-17mdk +- fixed smb.conf a bit, rebuilt on cooker. + +* Tue Jul 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-16mdk +- Finally, samba 2.2.1 has actually been release. At least we were ready! + Cleaned up smb.conf, and added some useful entries for domain controlling. + Migrated changes made in samba's samba2.spec for 2.2.1 to this file. + Added groupadd command in post to create a group for samba machine accounts. + (We should still check the postun, samba removes pam, logs and cache) + +* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-15mdk +- fixed smbwrapper compile options. + +* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-14mdk +- added LFS support. + added smbwrapper support (smbsh) + +* Wed Jun 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-13mdk +- /sbin/mount.smb and /sbin/mount.smbfs now point to the correct location + of smbmount (/usr/bin/smbmount) + +* Tue Jun 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-12mdk +- smbmount and smbumount are now in /usr/bin and SUID. + added ||: to triggerpostun son you don't get error 1 anymore when rpm -e + Checked the .bz2 sources with file *: everything is OK now (I'm so stupid ;o)! + +* Tue Jun 19 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1-11mdk +- s/Copyright/License/; +- Stop Sylvester from pretending .gz source to be .bz2 source via filename + aka really bzip2 the source. + +* Mon Jun 18 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-10mdk +- changed Till's startup script modifications: now samba is being reloaded + automatically 1 minute after it has started (same reasons as below in 9mdk) + added _post_ and _preun_ for service smb + fixed creation of /var/lib/samba/{netlogon,profiles} (%dir was missing) + +* Thu Jun 14 2001 Till Kamppeter <till@mandrakesoft.com> 2.2.1-9mdk +- Modified the Samba startup script so that in case of CUPS being used as + printing system Samba only starts when the CUPS daemon is ready to accept + requests. Otherwise the CUPS queues would not appear as Samba shares. + +* Mon Jun 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-8mdk +- patched smbmount.c to have it call smbmnt in sbin (thanks Seb). + +* Wed May 30 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-7mdk +- put SWAT menu icons back in place. + +* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-6mdk +- OOPS! fixed smbmount symlinks + +* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-5mdk +- removed inetd postun script, replaced with xinetd. + updated binary list (smbcacls...) + cleaned samba.spec + +* Mon May 28 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-4mdk +- Changed configure options to point to correct log and codepage directories, + added crude script to fix logrotate file for new log file names, updated + patches to work with current CVS. + +* Thu May 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-3mdk +- Cleaned and updated the %files section. + +* Sat May 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-2mdk +- Moved all samba files from /etc to /etc/samba (Thanks DomS!). + Fixed fixinit patch (/etc/samba/smb.conf) + +* Fri May 18 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-1mdk +- Now use packaging/Mandrake/smb.conf, removed unused and obsolete + patches, moved netlogon and profile shares to /var/lib/samba in the + smb.conf to match the spec file. Added configuration for ntlogon to + smb.conf. Removed pam-foo, fixinit and makefilepath patches. Removed + symlink I introduced in 2.2.0-1mdk + +* Thu May 3 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-5mdk +- Added more configure options. Changed Description field (thx John T). + +* Wed Apr 25 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-4mdk +- moved netlogon and profiles to /var/lib/samba by popular demand ;o) + +* Tue Apr 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-3mdk +- moved netlogon and profiles back to /home. + +* Fri Apr 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-2mdk +- fixed post inetd/xinetd script& + +* Thu Apr 19 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.0-1mdk +- Upgrade to 2.2.0. Merged most of 2.0.7-25mdk's patches (beware + nasty "ln -sf samba-%{ver} ../samba-2.0.7" hack to force some patches + to take. smbadduser and addtosmbpass seem to have disappeared. Moved + all Mandrake-specific files to packaging/Mandrake and made patches + from those shipped with samba. Moved netlogon to /home/samba and added + /home/samba/profiles. Added winbind,smbfilter and debug2html to make command. + +* Thu Apr 12 2001 Frederic Crozat <fcrozat@mandrakesoft.com> 2.0.7-25mdk +- Fix menu entry and provide separate menu entry for GNOME + (nautilus doesn't support HTTP authentication yet) +- Add icons in package + +* Fri Mar 30 2001 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-24mdk +- use new server macros + +* Wed Mar 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-23mdk +- check whether /etc/inetd.conf exists (upgrade) or not (fresh install). + +* Thu Mar 15 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-22mdk +- spec cosmetics, added '-r' option to lpr-cups command line so files are + removed from /var/spool/samba after printing. + +* Tue Mar 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-21mdk +- merged last rh patches. + +* Thu Nov 23 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-20mdk +- removed dependencies on cups and cups-devel so one can install samba without using cups +- added /home/netlogon + +* Mon Nov 20 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-19mdk +- Changed default print command in /etc/smb.conf, so that the Windows + driver of the printer has to be used on the client. +- Fixed bug in smbspool which prevented from printing from a + Linux-Samba-CUPS client to a Windows server through the guest account. + +* Mon Oct 16 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-18mdk +- Moved "smbspool" (Samba client of CUPS) to the samba-client package + +* Sat Oct 7 2000 Stefan van der Eijk <s.vandereijk@chello.nl> 2.0.7-17mdk +- Added RedHat's "quota" patch to samba-glibc21.patch.bz2, this fixes + quota related compile problems on the alpha. + +* Wed Oct 4 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-16mdk +- Fixed 'guest ok = ok' flag in smb.conf + +* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-15mdk +- Allowed guest account to print in smb.conf +- added swat icon in menu + +* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-14mdk +- Removed rh ssl patch and --with-ssl flag: not appropriate for 7.2 + +* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-13mdk +- Changed fixinit patch. +- Changed smb.conf for better CUPS configuration. +- Thanks Fred for doing this ---vvv. + +* Tue Oct 3 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-12mdk +- menu entry for web configuration tool. +- merge with rh: xinetd + ssl + pam_stack. +- Added smbadduser rh-bugfix w/o relocation of config-files. + +* Mon Oct 2 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-11mdk +- added build requires on cups-devel and pam-devel. + +* Mon Oct 2 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-10mdk +- Fixed smb.conf entry for CUPS: "printcap name = lpstat", "lpstats" was + wrong. + +* Mon Sep 25 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-9mdk +- Cosmetic changes to make rpmlint more happy + +* Wed Sep 11 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-8mdk +- added linkage to the using_samba book in swat + +* Fri Sep 01 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-7mdk +- Added CUPS support to smb.conf +- Added internationalization options to smb.conf [Global] + +* Wed Aug 30 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-6mdk +- Put "smbspool" to the files to install + +* Wed Aug 30 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-5mdk +- Did some cleaning in the patches + +* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-4mdk +- relocated man pages from /usr/man to /usr/share/man for compatibility reasons + +* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-3mdk +- added make_unicodemap and build of unicode_map.$i in the spec file + +* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-2mdk +- renamed /etc/codepage/codepage.$i into /etc/codepage/unicode_map.$i to fix smbmount bug. + +* Fri Jul 07 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-1mdk +- 2.0.7 + +* Wed Apr 05 2000 Francis Galiegue <fg@mandrakesoft.com> 2.0.6-4mdk + +- Titi sucks, does not put versions in changelog +- Fixed groups for -common and -client +- /usr/sbin/samba is no config file + +* Thu Mar 23 2000 Thierry Vignaud <tvignaud@mandrakesoft.com> +- fix buggy post install script (pixel) + +* Fri Mar 17 2000 Francis Galiegue <francis@mandrakesoft.com> 2.0.6-2mdk + +- Changed group according to 7.1 specs +- Some spec file changes +- Let spec-helper do its job + +* Thu Nov 25 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> +- 2.0.6. + +* Tue Nov 2 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> +- Merge with rh changes. +- Split in 3 packages. + +* Fri Aug 13 1999 Pablo Saratxaga <pablo@@mandrakesoft.com> +- corrected a bug with %post (the $1 parameter is "1" in case of + a first install, not "0". That parameter is the number of packages + of the same name that will exist after running all the steps if nothing + is removed; so it is "1" after first isntall, "2" for a second install + or an upgrade, and "0" for a removal) + +* Wed Jul 28 1999 Pablo Saratxaga <pablo@@mandrakesoft.com> +- made smbmnt and smbumount suid root, and only executable by group 'smb' + add to 'smb' group any user that should be allowed to mount/unmount + SMB shared directories + +* Fri Jul 23 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> +- 2.0.5a (bug security fix). + +* Wed Jul 21 1999 Axalon Bloodstone <axalon@linux-mandrake.com> +- 2.0.5 +- cs/da/de/fi/fr/it/tr descriptions/summaries + +* Sun Jun 13 1999 Bernhard Rosenkränzer <bero@mandrakesoft.com> +- 2.0.4b +- recompile on a system that works ;) + +* Wed Apr 21 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> +- Mandrake adaptations. +- Bzip2 man-pages. + +* Fri Mar 26 1999 Bill Nottingham <notting@redhat.com> +- add a mount.smb to make smb mounting a little easier. +- smb filesystems apparently do not work on alpha. Oops. + +* Thu Mar 25 1999 Bill Nottingham <notting@redhat.com> +- always create codepages + +* Tue Mar 23 1999 Bill Nottingham <notting@redhat.com> +- logrotate changes + +* Sun Mar 21 1999 Cristian Gafton <gafton@redhat.com> +- auto rebuild in the new build environment (release 3) + +* Fri Mar 19 1999 Preston Brown <pbrown@redhat.com> +- updated init script to use graceful restart (not stop/start) + +* Tue Mar 9 1999 Bill Nottingham <notting@redhat.com> +- update to 2.0.3 + +* Thu Feb 18 1999 Bill Nottingham <notting@redhat.com> +- update to 2.0.2 + +* Mon Feb 15 1999 Bill Nottingham <notting@redhat.com> +- swat swat + +* Tue Feb 9 1999 Bill Nottingham <notting@redhat.com> +- fix bash2 breakage in post script + +* Fri Feb 5 1999 Bill Nottingham <notting@redhat.com> +- update to 2.0.0 + +* Mon Oct 12 1998 Cristian Gafton <gafton@redhat.com> +- make sure all binaries are stripped + +* Thu Sep 17 1998 Jeff Johnson <jbj@redhat.com> +- update to 1.9.18p10. +- fix %triggerpostun. + +* Tue Jul 07 1998 Erik Troan <ewt@redhat.com> +- updated postun triggerscript to check $0 +- clear /etc/codepages from %preun instead of %postun + +* Mon Jun 08 1998 Erik Troan <ewt@redhat.com> +- made the %postun script a tad less agressive; no reason to remove + the logs or lock file (after all, if the lock file is still there, + samba is still running) +- the %postun and %preun should only exectute if this is the final + removal +- migrated %triggerpostun from Red Hat's samba package to work around + packaging problems in some Red Hat samba releases + +* Sun Apr 26 1998 John H Terpstra <jht@samba.anu.edu.au> +- minor tidy up in preparation for release of 1.9.18p5 +- added findsmb utility from SGI package + +* Wed Mar 18 1998 John H Terpstra <jht@samba.anu.edu.au> +- Updated version and codepage info. +- Release to test name resolve order + +* Sat Jan 24 1998 John H Terpstra <jht@samba.anu.edu.au> +- Many optimisations (some suggested by Manoj Kasichainula <manojk@io.com> +- Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb +- Compounded make line +- Updated smb.init restart mechanism +- Use compound mkdir -p line instead of individual calls to mkdir +- Fixed smb.conf file path for log files +- Fixed smb.conf file path for incoming smb print spool directory +- Added a number of options to smb.conf file +- Added smbadduser command (missed from all previous RPMs) - Doooh! +- Added smbuser file and smb.conf file updates for username map diff --git a/packaging/Mandrake/swat_16.xpm.bz2 b/packaging/Mandrake/swat_16.xpm.bz2 Binary files differnew file mode 100644 index 0000000000..c17430c589 --- /dev/null +++ b/packaging/Mandrake/swat_16.xpm.bz2 diff --git a/packaging/Mandrake/swat_32.xpm.bz2 b/packaging/Mandrake/swat_32.xpm.bz2 Binary files differnew file mode 100644 index 0000000000..c8e4df6bff --- /dev/null +++ b/packaging/Mandrake/swat_32.xpm.bz2 diff --git a/packaging/Mandrake/swat_48.xpm.bz2 b/packaging/Mandrake/swat_48.xpm.bz2 Binary files differnew file mode 100644 index 0000000000..812b737b4f --- /dev/null +++ b/packaging/Mandrake/swat_48.xpm.bz2 |