summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--examples/simple/README2
-rw-r--r--examples/simple/smb.conf167
2 files changed, 0 insertions, 169 deletions
diff --git a/examples/simple/README b/examples/simple/README
deleted file mode 100644
index 9628aa8260..0000000000
--- a/examples/simple/README
+++ /dev/null
@@ -1,2 +0,0 @@
-This is the "original" sample config file.
-
diff --git a/examples/simple/smb.conf b/examples/simple/smb.conf
deleted file mode 100644
index 786bf49057..0000000000
--- a/examples/simple/smb.conf
+++ /dev/null
@@ -1,167 +0,0 @@
-; Configuration file for smbd.
-; ============================================================================
-; For the format of this file and comprehensive descriptions of all the
-; configuration option, please refer to the man page for smb.conf(5).
-;
-; The following configuration should suit most systems for basic usage and
-; initial testing. It gives all clients access to their home directories and
-; allows access to all printers specified in /etc/printcap.
-;
-; Things you need to check:
-; --------------------------
-;
-; 1: Check the path to your printcap file. If you are using a system that does
-; not use printcap (eg., Solaris), create a file containing lines of the
-; form
-;
-; printername|printername|printername|
-;
-; where each "printername" is the name of a printer you want to provide
-; access to. Then alter the "printcap =" entry to point to the new file.
-;
-; If using Solaris, the following command will generate a suitable printcap
-; file:
-;
-; lpc status | grep ":" | sed s/:/\|/ > myprintcap
-;
-; 2: Make sure the "print command" entry is correct for your system. This
-; command should submit a file (represented by %s) to a printer
-; (represented by %p) for printing and should REMOVE the file after
-; printing.
-;
-; One most systems the default will be OK, as long as you get "printing ="
-; right.
-;
-; It is also a good idea to use an absolute path in the print command
-; as there is no guarantee the search path will be set correctly.
-;
-; 3: Make sure the "printing =" option is set correctly for your system.
-; Possible values are "sysv", "bsd" or "aix".
-;
-; 4: Make sure the "lpq command" entry is correct for your system. The default
-; may not work for you.
-;
-; 5: Make sure that the user specified in "guest account" exists. Typically
-; this will be a user that cannot log in and has minimal privileges.
-; Often the "nobody" account doesn't work (very system dependant).
-;
-; 6: You should consider the "security =" option. See a full description
-; in the main documentation and the smb.conf(5) manual page
-;
-; 7: Look at the "hosts allow" option, unless you want everyone on the internet
-; to be able to access your files.
-;
-[global]
- printing = bsd
- printcap name = /etc/printcap
- load printers = yes
- guest account = pcguest
-; This next option sets a separate log file for each client. Remove
-; it if you want a combined log file.
- log file = /usr/local/samba/log.%m
-
-; You will need a world readable lock directory and "share modes=yes"
-; if you want to support the file sharing modes for multiple users
-; of the same files
-; lock directory = /usr/local/samba/var/locks
-; share modes = yes
-
-[homes]
- comment = Home Directories
- browseable = no
- read only = no
- create mode = 0750
-
-[printers]
- comment = All Printers
- browseable = no
- printable = yes
- public = no
- writable = no
- create mode = 0700
-
-; you might also want this one, notice that it is read only so as not to give
-; people without an account write access.
-;
-; [tmp]
-; comment = Temporary file space
-; path = /tmp
-; read only = yes
-; public = yes
-
-;
-; Other examples.
-;
-; A private printer, usable only by fred. Spool data will be placed in fred's
-; home directory. Note that fred must have write access to the spool directory,
-; wherever it is.
-;[fredsprn]
-; comment = Fred's Printer
-; valid users = fred
-; path = /homes/fred
-; printer = freds_printer
-; public = no
-; writable = no
-; printable = yes
-;
-; A private directory, usable only by fred. Note that fred requires write
-; access to the directory.
-;[fredsdir]
-; comment = Fred's Service
-; path = /usr/somewhere/private
-; valid users = fred
-; public = no
-; writable = yes
-; printable = no
-;
-; A publicly accessible directory, but read only, except for people in
-; the staff group
-;[public]
-; comment = Public Stuff
-; path = /usr/somewhere/public
-; public = yes
-; writable = no
-; printable = no
-; write list = @staff
-;
-; a service which has a different directory for each machine that connects
-; this allows you to tailor configurations to incoming machines. You could
-; also use the %u option to tailor it by user name.
-; The %m gets replaced with the machine name that is connecting.
-;[pchome]
-; comment = PC Directories
-; path = /usr/pc/%m
-; public = no
-; writeable = yes
-;
-;
-; A publicly accessible directory, read/write to all users. Note that all files
-; created in the directory by users will be owned by the default user, so
-; any user with access can delete any other user's files. Obviously this
-; directory must be writable by the default user. Another user could of course
-; be specified, in which case all files would be owned by that user instead.
-;[public]
-; path = /usr/somewhere/else/public
-; public = yes
-; only guest = yes
-; writable = yes
-; printable = no
-;
-;
-; The following two entries demonstrate how to share a directory so that two
-; users can place files there that will be owned by the specific users. In this
-; setup, the directory should be writable by both users and should have the
-; sticky bit set on it to prevent abuse. Obviously this could be extended to
-; as many users as required.
-;[myshare]
-; comment = Mary's and Fred's stuff
-; path = /usr/somewhere/shared
-; valid users = mary fred
-; public = no
-; writable = yes
-; printable = no
-; create mask = 0765
-
-
-
-