diff options
| -rw-r--r-- | packaging/Mandrake/README | 11 | ||||
| -rwxr-xr-x | packaging/Mandrake/findsmb | 141 | ||||
| -rw-r--r-- | packaging/Mandrake/makerpms.sh.tmpl | 15 | ||||
| -rw-r--r-- | packaging/Mandrake/samba.log | 15 | ||||
| -rw-r--r-- | packaging/Mandrake/samba.pamd | 5 | ||||
| -rw-r--r-- | packaging/Mandrake/samba.xinetd | 15 | ||||
| -rw-r--r-- | packaging/Mandrake/samba2.spec.tmpl | 303 | ||||
| -rw-r--r-- | packaging/Mandrake/smb.conf | 315 | ||||
| -rwxr-xr-x | packaging/Mandrake/smb.init | 93 | ||||
| -rwxr-xr-x | packaging/Mandrake/smbprint | 77 | ||||
| -rw-r--r-- | packaging/Mandrake/smbusers | 3 |
11 files changed, 993 insertions, 0 deletions
diff --git a/packaging/Mandrake/README b/packaging/Mandrake/README new file mode 100644 index 0000000000..1c5bb30edc --- /dev/null +++ b/packaging/Mandrake/README @@ -0,0 +1,11 @@ +Preparation Date: Sat Apr 14 2001 +Preparer: John H Terpstra <jht@samba.org> + +Instructions: Preparing Samba Packages for Mandrake Linux 7.2 +=============================================================== + +We provide support only for current versions of Mandrake Linux. + +To produce the RPMS simply type: + sh makerpms.sh + diff --git a/packaging/Mandrake/findsmb b/packaging/Mandrake/findsmb new file mode 100755 index 0000000000..986c248177 --- /dev/null +++ b/packaging/Mandrake/findsmb @@ -0,0 +1,141 @@ +#!/usr/bin/perl +# +# Prints info on all smb responding machines on a subnet. +# This script needs to be run on a machine without nmbd running and be +# run as root to get correct info from WIN95 clients. +# +# syntax: +# findsmb [subnet broadcast address] +# +# with no agrument it will list machines on the current subnet +# +# There will be a "+" in front of the workgroup name for machines that are +# local master browsers for that workgroup. There will be an "*" in front +# of the workgroup name for machines that are the domain master browser for +# that workgroup. +# + +$SAMBABIN = "/usr/bin"; + +for ($i = 0; $i < 2; $i++) { # test for -d option and broadcast address + $_ = shift; + if (m/-d|-D/) { + $DEBUG = 1; + } else { + if ($_) { + $BCAST = "-B $_"; + } + } +} + +sub ipsort # do numeric sort on last field of IP address +{ + @t1 = split(/\./,$a); + @t2 = split(/\./,$b); + @t1[3] <=> @t2[3]; +} + +# look for all machines that respond to a name lookup + +open(NMBLOOKUP,"$SAMBABIN/nmblookup $BCAST '*'|") || + die("Can't run nmblookup '*'.\n"); + +# get rid of all lines that are not a response IP address, +# strip everything but IP address and sort by last field in address + +@ipaddrs = sort ipsort grep(s/ \*<00>.*$//,<NMBLOOKUP>); + +# print header info + +print "\nIP ADDR NETBIOS NAME WORKGROUP/OS/VERSION $BCAST\n"; +print "---------------------------------------------------------------------\n"; + +foreach $ip (@ipaddrs) # loop through each IP address found +{ + $ip =~ s/\n//; # strip newline from IP address + +# find the netbios names registered by each machine + + open(NMBLOOKUP,"$SAMBABIN/nmblookup -r -A $ip|") || + die("Can't get nmb name list.\n"); + @nmblookup = <NMBLOOKUP>; + close NMBLOOKUP; + +# get the first <00> name + + @name = grep(/<00>/,@nmblookup); + $_ = @name[0]; + if ($_) { # we have a netbios name + if (/GROUP/) { # is it a group name + ($name, $aliases, $type, $length, @addresses) = + gethostbyaddr(pack('C4',split('\.',$ip)),2); + if (! $name) { # could not get name + $name = "unknown nis name"; + } + } else { + /(\S+)/; + $name = $1; + } + +# do an smbclient command on the netbios name. + + open(SMB,"$SAMBABIN/smbclient -N -L $name -I $ip -U% |") || + die("Can't do smbclient command.\n"); + @smb = <SMB>; + close SMB; + + if ($DEBUG) { # if -d flag print results of nmblookup and smbclient + print "===============================================================\n"; + print @nmblookup; + print @smb; + } + +# look for the OS= string + + @info = grep(/OS=/,@smb); + $_ = @info[0]; + if ($_) { # we found response + s/Domain=|OS=|Server=|\n//g; # strip out descriptions to make line shorter + + } else { # no OS= string in response (WIN95 client) + +# for WIN95 clients get workgroup name from nmblookup response + @name = grep(/<00> - <GROUP>/,@nmblookup); + $_ = @name[0]; + if ($_) { + /(\S+)/; + $_ = "[$1]"; + } else { + $_ = "Unknown Workgroup"; + } + } + +# see if machine registered a local master browser name + if (grep(/<1d>/,@nmblookup)) { + $master = '+'; # indicate local master browser + if (grep(/<1b>/,@nmblookup)) { # how about domain master browser? + $master = '*'; # indicate domain master browser + } + } else { + $master = ' '; # not a browse master + } + +# line up info in 3 columns + + print "$ip".' 'x(16-length($ip))."$name".' 'x(14-length($name))."$master"."$_\n"; + + } else { # no netbios name found +# try getting the host name + ($name, $aliases, $type, $length, @addresses) = + gethostbyaddr(pack('C4',split('\.',$ip)),2); + if (! $name) { # could not get name + $name = "unknown nis name"; + } + if ($DEBUG) { # if -d flag print results of nmblookup + print "===============================================================\n"; + print @nmblookup; + } + print "$ip".' 'x(16-length($ip))."$name\n"; + } +} + diff --git a/packaging/Mandrake/makerpms.sh.tmpl b/packaging/Mandrake/makerpms.sh.tmpl new file mode 100644 index 0000000000..3b13bcab64 --- /dev/null +++ b/packaging/Mandrake/makerpms.sh.tmpl @@ -0,0 +1,15 @@ +#!/bin/sh +# Copyright (C) 1998 John H Terpstra, 1999 K Spoon +# +SPECDIR=/usr/src/RPM/SPECS +SRCDIR=/usr/src/RPM/SOURCES +USERID=`id -u` +GRPID=`id -g` +VERSION='PVERSION' + +( cd ../../.. ; chown -R ${USERID}.${GRPID} ${SRCDIR}/samba-$VERSION ) +( cd ../../.. ; tar --exclude-dir=CVS czvf ${SRCDIR}/samba-PVERSION.tar.gz samba-$VERSION ) +cp -a *.spec $SPECDIR +cp -a *.patch smb.* samba.log $SRCDIR +cd $SPECDIR +rpm -ba -v samba2.spec diff --git a/packaging/Mandrake/samba.log b/packaging/Mandrake/samba.log new file mode 100644 index 0000000000..4e8b44b60e --- /dev/null +++ b/packaging/Mandrake/samba.log @@ -0,0 +1,15 @@ +/var/log/samba/log.nmb { + notifempty + missingok + postrotate + /usr/bin/killall -HUP nmbd + endscript +} + +/var/log/samba/log.smb { + notifempty + missingok + postrotate + /usr/bin/killall -HUP smbd + endscript +} diff --git a/packaging/Mandrake/samba.pamd b/packaging/Mandrake/samba.pamd new file mode 100644 index 0000000000..30912de172 --- /dev/null +++ b/packaging/Mandrake/samba.pamd @@ -0,0 +1,5 @@ +#%PAM-1.0 +auth required /lib/security/pam_nologin.so +auth required /lib/security/pam_stack.so service=system-auth +account required /lib/security/pam_stack.so service=system-auth +session required /lib/security/pam_stack.so service=system-auth diff --git a/packaging/Mandrake/samba.xinetd b/packaging/Mandrake/samba.xinetd new file mode 100644 index 0000000000..a6dea1f740 --- /dev/null +++ b/packaging/Mandrake/samba.xinetd @@ -0,0 +1,15 @@ +# default: on +# description: SWAT is the Samba Web Admin Tool. Use swat \ +# to configure your Samba server. To use SWAT, \ +# connect to port 901 with your favorite web browser. +service swat +{ + port = 901 + socket_type = stream + wait = no + only_from = localhost + user = root + server = /usr/sbin/swat + log_on_failure += USERID + disable = no +} diff --git a/packaging/Mandrake/samba2.spec.tmpl b/packaging/Mandrake/samba2.spec.tmpl new file mode 100644 index 0000000000..750b88e392 --- /dev/null +++ b/packaging/Mandrake/samba2.spec.tmpl @@ -0,0 +1,303 @@ +Summary: Samba SMB client and server +Name: samba +Version: PVERSION +Release: PRELEASE +Copyright: GNU GPL version 2 +Group: Networking +Source: ftp://samba.org/pub/samba/samba-%{version}.tar.gz +Packager: John H Terpstra [Samba-Team] <jht@samba.org> +Requires: pam >= 0.72 kernel >= 2.2.1 glibc >= 2.1.2 +Prereq: chkconfig fileutils +BuildRoot: /var/tmp/samba +Prefix: /usr + +%description +Samba provides an SMB server which can be used to provide +network services to SMB (sometimes called "Lan Manager") +clients, including various versions of MS Windows, OS/2, +and other Linux machines. Samba also provides some SMB +clients, which complement the built-in SMB filesystem +in Linux. Samba uses NetBIOS over TCP/IP (NetBT) protocols +and does NOT need NetBEUI (Microsoft Raw NetBIOS frame) +protocol. + +Samba-2.2 features working NT Domain Control capability and +includes the SWAT (Samba Web Administration Tool) that +allows samba's smb.conf file to be remotely managed using your +favourite web browser. For the time being this is being +enabled on TCP port 901 via inetd. + +Users are advised to use Samba-2.2 as a Windows NT4 +Domain Controller only on networks that do NOT have a Windows +NT Domain Controller. This release does NOT as yet have +Backup Domain control ability. + +Please refer to the WHATSNEW.txt document for fixup information. +This binary release includes encrypted password support. + +Please read the smb.conf file and ENCRYPTION.txt in the +docs directory for implementation details. + +%changelog +* Mon Apr 23 2001 Gerald (Jerry) Carter <jerry@samba.org> + - Added a few bug fixes to release the first Mandrake RPMS + +* Sat Apr 14 2001 John H Terpstra <jht@samba.org> + - Added official samba-team support for Mandrakesoft + - We get a lot of requests for this! + +%prep +%setup + +%build +cd source + +%ifarch ia64 +libtoolize --copy --force # get it to recognize IA-64 +autoconf +autoheader +EXTRA="-D_LARGEFILE64_SOURCE" +%endif + +NUMCPU=`grep processor /proc/cpuinfo | wc -l` + +CFLAGS="$RPM_OPT_FLAGS $EXTRA" ./configure \ + --prefix=%{prefix} \ + --with-fhs \ + --libdir=/etc \ + --localstatedir=/var \ + --with-configdir=/etc \ + --with-lockdir=/var/lock/samba \ + --with-swatdir=%{prefix}/share/swat \ + --with-quotas \ + --with-smbmount \ + --with-pam \ + --with-syslog \ + --with-utmp \ + --with-netatalk \ + --with-sambabook=%{prefix}/share/swat/using_samba + +make -j${NUMCPU} proto +make -j${NUMCPU} all smbfilter nsswitch/libnss_wins.so debug2html + +%install +rm -rf $RPM_BUILD_ROOT +mkdir -p $RPM_BUILD_ROOT +mkdir -p $RPM_BUILD_ROOT/etc/{logrotate.d,pam.d,samba,xinetd.d,codepages/src} +mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d +mkdir -p $RPM_BUILD_ROOT/lib +mkdir -p $RPM_BUILD_ROOT%{prefix}/{bin,sbin} +mkdir -p $RPM_BUILD_ROOT/home/samba +mkdir -p $RPM_BUILD_ROOT/sbin +mkdir -p $RPM_BUILD_ROOT%{prefix}/share/swat/{images,help,include} +mkdir -p $RPM_BUILD_ROOT%{prefix}/share/swat/using_samba/{figs,gifs} +mkdir -p $RPM_BUILD_ROOT%{prefix}/share/man/{man1,man5,man7,man8} +mkdir -p $RPM_BUILD_ROOT/var/lock/samba +mkdir -p $RPM_BUILD_ROOT/var/log/samba +mkdir -p $RPM_BUILD_ROOT/var/spool/samba + +# Install standard binary files +for i in nmblookup smbclient smbpasswd smbstatus testparm testprns \ + make_smbcodepage make_unicodemap make_printerdef rpcclient smbspool +do +install -m755 -s source/bin/$i $RPM_BUILD_ROOT%{prefix}/bin +done +for i in smbtar +do +install -m755 source/script/$i $RPM_BUILD_ROOT%{prefix}/bin +done + +# Install secure binary files +for i in smbd nmbd swat smbmount smbumount smbmnt debug2html \ + smbfilter +do +install -m755 -s source/bin/$i $RPM_BUILD_ROOT%{prefix}/sbin +done + +# we need a symlink for mount to recognise the smb and smbfs filesystem types +ln -sf %{prefix}/sbin/smbmount $RPM_BUILD_ROOT/sbin/mount.smbfs +ln -sf %{prefix}/sbin/smbmount $RPM_BUILD_ROOT/sbin/mount.smb + +# Install level 1 man pages +for i in *.1 +do +install -m644 docs/manpages/$i $RPM_BUILD_ROOT%{prefix}/share/man/man1 +done + +# Install codepage source files +for i in 437 737 775 850 852 861 866 932 936 949 950 1251 +do +install -m644 source/codepages/codepage_def.$i $RPM_BUILD_ROOT/etc/codepages/src +done +for i in 437 737 850 852 861 866 932 936 949 950 ISO8859-1 ISO8859-2 ISO8859-5 ISO8859-7 KOI8-R +do +install -m644 source/codepages/CP$i.TXT $RPM_BUILD_ROOT/etc/codepages/src +done + +# Install the nsswitch library extenstion file +install -m755 source/nsswitch/libnss_wins.so $RPM_BUILD_ROOT/lib +# Make link for wins resolver +( cd $RPM_BUILD_ROOT/lib; ln -s libnss_wins.so libnss_wins.so.2; ) + +# Install SWAT helper files +for i in swat/help/*.html docs/htmldocs/*.html +do +install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/help +done +for i in swat/images/*.gif +do +install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/images +done +for i in swat/include/*.html +do +install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/include +done + +# This is the O'Reily Samba Book - on-line +for i in docs/htmldocs/using_samba/*.html +do +install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/using_samba +done +for i in docs/htmldocs/using_samba/figs/*.gif +do +install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/using_samba/figs +done +for i in docs/htmldocs/using_samba/gifs/*.gif +do +install -m644 $i $RPM_BUILD_ROOT%{prefix}/share/swat/using_samba/gifs +done + +# Install the miscellany +install -m644 swat/README $RPM_BUILD_ROOT%{prefix}/share/swat +install -m644 docs/manpages/smb.conf.5 $RPM_BUILD_ROOT%{prefix}/share/man/man5 +install -m644 docs/manpages/lmhosts.5 $RPM_BUILD_ROOT%{prefix}/share/man/man5 +install -m644 docs/manpages/smbpasswd.5 $RPM_BUILD_ROOT%{prefix}/share/man/man5 +install -m644 docs/manpages/samba.7 $RPM_BUILD_ROOT%{prefix}/share/man/man7 +install -m644 docs/manpages/smbd.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8 +install -m644 docs/manpages/nmbd.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8 +install -m644 docs/manpages/smbpasswd.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8 +install -m644 docs/manpages/swat.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8 +install -m644 docs/manpages/smbmount.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8 +install -m644 docs/manpages/smbmnt.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8 +install -m644 docs/manpages/smbumount.8 $RPM_BUILD_ROOT%{prefix}/share/man/man8 +install -m644 swat/README $RPM_BUILD_ROOT%{prefix}/share/swat +install -m644 packaging/Mandrake/smb.con* $RPM_BUILD_ROOT/etc/ +install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT/etc/smbusers +install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT%{prefix}/bin +install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT%{prefix}/bin +install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/etc/rc.d/init.d/smb +install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT%{prefix}/sbin/samba +install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/etc/pam.d/samba +install -m644 packaging/Mandrake/samba.log $RPM_BUILD_ROOT/etc/logrotate.d/samba +install -m644 packaging/Mandrake/samba.xinetd $RPM_BUILD_ROOT/etc/xinetd.d/swat +echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/etc/lmhosts + +# Link smbmount to /sbin/mount.smb and /sbin/mount.smbfs +ln -sf %{prefix}/sbin/smbmount $RPM_BUILD_ROOT/sbin/mount.smb +ln -sf %{prefix}/sbin/smbmount $RPM_BUILD_ROOT/sbin/mount.smbfs + +%clean +rm -rf $RPM_BUILD_ROOT + +%post +/sbin/chkconfig --add smb +/sbin/chkconfig smb off + +# Build codepage load files +cd /etc +for i in 437 737 775 850 852 861 866 932 936 949 950 1251 +do +%{prefix}/bin/make_smbcodepage c $i /etc/codepages/src/codepage_def.$i /etc/codepages/codepage.$i +done +for i in 437 737 850 852 861 866 932 936 949 950 ISO8859-1 ISO8859-2 ISO8859-5 ISO8859-7 KOI8-R +do +%{prefix}/bin/make_unicodemap $i /etc/codepages/src/CP$i.TXT /etc/codepages/unicode_map.$i +done + +# Add swat entry to /etc/services if not already there +if !( grep ^[:space:]*swat /etc/services > /dev/null ) then + echo 'swat 901/tcp # Add swat service used via inetd' >> /etc/services +fi + +# Add swat entry to /etc/inetd.conf if needed +if [ -f /etc/inetd.conf ]; then + if !( grep ^[:space:]*swat /etc/inetd.conf > /dev/null ) then + echo '#swat stream tcp nowait.400 root %{prefix}/sbin/swat swat' >> /etc/inetd.conf + killall -1 inetd || : + fi +fi + +%preun +if [ $1 = 0 ] ; then + /sbin/chkconfig --del smb + + # We want to remove the browse.dat and wins.dat files so they can not interfer with a new version of samba! + if [ -e /var/lock/samba/browse.dat ]; then + rm -f /var/lock/samba/browse.dat + fi + if [ -e /var/lock/samba/wins.dat ]; then + rm -f /var/lock/samba/wins.dat + fi +fi + +%postun +# Only delete remnants of samba if this is the final deletion. +if [ $1 = 0 ] ; then + if [ -x /etc/pam.d/samba ]; then + rm -f /etc/pam.d/samba + fi + if [ -e /var/log/samba ]; then + rm -rf /var/log/samba + fi + if [ -e /var/lock/samba ]; then + rm -rf /var/lock/samba + fi + + # Remove swat entries from /etc/inetd.conf and /etc/services + cd /etc + tmpfile=/etc/tmp.$$ + if [ -f /etc/inetd.conf ]; then + sed -e '/^[:space:]*swat.*$/d' /etc/inetd.conf > $tmpfile + mv $tmpfile inetd.conf + fi + sed -e '/^[:space:]*swat.*$/d' /etc/services > $tmpfile + mv $tmpfile services +fi + +%triggerpostun -- samba < samba-2.0.0 +if [ $0 != 0 ]; then + /sbin/chkconfig --add smb +fi + +%files +%doc README COPYING Manifest Read-Manifest-Now +%doc WHATSNEW.txt Roadmap +%doc docs +%doc swat/README +%doc examples +%attr(-,root,root) %{prefix}/sbin/* +%attr(-,root,root) /sbin/* +%attr(-,root,root) %{prefix}/bin/* +%attr(755,root,root) /lib/* +%attr(-,root,root) %{prefix}/share/swat/help/* +%attr(-,root,root) %{prefix}/share/swat/images/* +%attr(-,root,root) %{prefix}/share/swat/include/* +%attr(-,root,root) %{prefix}/share/swat/using_samba/* +%attr(-,root,root) %config(noreplace) /etc/lmhosts +%attr(-,root,root) %config(noreplace) /etc/smb.conf +%attr(-,root,root) %config(noreplace) /etc/smbusers +%attr(-,root,root) /etc/rc.d/init.d/smb +%attr(-,root,root) /etc/logrotate.d/samba +%attr(-,root,root) %config(noreplace) /etc/pam.d/samba +%attr(-,root,root) %{prefix}/share/man/man1/* +%attr(-,root,root) %{prefix}/share/man/man5/* +%attr(-,root,root) %{prefix}/share/man/man7/* +%attr(-,root,root) %{prefix}/share/man/man8/* +%attr(-,root,root) %dir /etc/codepages/* +%attr(-,root,root) %dir /etc/codepages/src/* +%attr(-,root,root) %dir /var/lock/samba +%attr(-,root,root) %dir /var/log/samba +%attr(1777,root,root) %dir /var/spool/samba + + + diff --git a/packaging/Mandrake/smb.conf b/packaging/Mandrake/smb.conf new file mode 100644 index 0000000000..db0528d8aa --- /dev/null +++ b/packaging/Mandrake/smb.conf @@ -0,0 +1,315 @@ +# This is the main Samba configuration file. You should read the +# smb.conf(5) manual page in order to understand the options listed +# here. Samba has a huge number of configurable options (perhaps too +# many!) most of which are not shown in this example +# +# Any line which starts with a ; (semi-colon) or a # (hash) +# is a comment and is ignored. In this example we will use a # +# for commentry and a ; for parts of the config file that you +# may wish to enable +# +# NOTE: Whenever you modify this file you should run the command "testparm" +# to check that you have not made any basic syntactic errors. +# +#======================= Global Settings ===================================== +[global] + +# workgroup = NT-Domain-Name or Workgroup-Name + workgroup = MDKGROUP + +# server string is the equivalent of the NT Description field + server string = Samba Server %v + +# This option is important for security. It allows you to restrict +# connections to machines which are on your local network. The +# following example restricts access to two C class networks and +# the "loopback" interface. For more examples of the syntax see +# the smb.conf man page +; hosts allow = 192.168.1. 192.168.2. 127. + +# Enabling internationalization: +# you can match a Windows code page with a UNIX character set. +# Windows: 437 (US), 737 (GREEK), 850 (Latin1 - Western European), +# 852 (Eastern Eu.), 861 (Icelandic), 932 (Cyrillic - Russian), +# 936 (Japanese - Shift-JIS), 936 (Simpl. Chinese), 949 (Korean Hangul), +# 950 (Trad. Chin.). +# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.), +# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.) +# This is an example for french users: +; client code page = 850 +; character set = ISO8859-1 + + +# CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK +# (as cups is now used in linux-mandrake 7.2 by default) +# if you want to automatically load your printer list rather +# than setting them up individually then you'll need this + printcap name = lpstat + load printers = yes + +# It should not be necessary to spell out the print system type unless +# yours is non-standard. Currently supported print systems include: +# bsd, sysv, plp, lprng, aix, hpux, qnx, cups + printing = cups + + +# Uncomment this if you want a guest account, you must add this to /etc/passwd +# otherwise the user "nobody" is used +; guest account = pcguest + +# this tells Samba to use a separate log file for each machine +# that connects + log file = /var/log/samba/log.%m + +# Put a capping on the size of the log files (in Kb). + max log size = 50 + +# Security mode. Most people will want user level security. See +# security_level.txt for details. + security = user +# Use password server option only with security = server +; password server = <NT-Server-Name> + +# Password Level allows matching of _n_ characters of the password for +# all combinations of upper and lower case. +; password level = 8 +; username level = 8 + +# You may wish to use password encryption. Please read +# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. +# Do not enable this option unless you have read those documents +; encrypt passwords = yes +; smb passwd file = /etc/smbpasswd + +# The following are needed to allow password changing from Windows to +# update the Linux sytsem password also. +# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above. +# NOTE2: You do NOT need these to allow workstations to change only +# the encrypted SMB passwords. They allow the Unix password +# to be kept in sync with the SMB password. +; unix password sync = Yes +; passwd program = /usr/bin/passwd %u +; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully* + +# Unix users can map to different SMB User names +; username map = /etc/smbusers + +# Using the following line enables you to customise your configuration +# on a per machine basis. The %m gets replaced with the netbios name +# of the machine that is connecting +; include = /etc/smb.conf.%m + +# Most people will find that this option gives better performance. +# See speed.txt and the manual pages for details + socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 + +# Configure Samba to use multiple interfaces +# If you have multiple network interfaces then you must list them +# here. See the man page for details. +; interfaces = 192.168.12.2/24 192.168.13.2/24 + +# Configure remote browse list synchronisation here +# request announcement to, or browse list sync from: +# a specific host or from / to a whole subnet (see below) +; remote browse sync = 192.168.3.25 192.168.5.255 +# Cause this host to announce itself to local subnets here +; remote announce = 192.168.1.255 192.168.2.44 + +# Browser Control Options: +# set local master to no if you don't want Samba to become a master +# browser on your network. Otherwise the normal election rules apply +; local master = no + +# OS Level determines the precedence of this server in master browser +# elections. The default value should be reasonable +; os level = 33 + +# Domain Master specifies Samba to be the Domain Master Browser. This +# allows Samba to collate browse lists between subnets. Don't use this +# if you already have a Windows NT domain controller doing this job +; domain master = yes + +# Preferred Master causes Samba to force a local browser election on startup +# and gives it a slightly higher chance of winning the election +; preferred master = yes + +# Enable this if you want Samba to be a domain logon server for +# Windows95 workstations. +; domain logons = yes + +# if you enable domain logons then you may want a per-machine or +# per user logon script +# run a specific logon batch file per workstation (machine) +; logon script = %m.bat +# run a specific logon batch file per username +; logon script = %U.bat + +# Where to store roving profiles (only for Win95 and WinNT) +# %L substitutes for this servers netbios name, %U is username +# You must uncomment the [Profiles] share below +; logon path = \\%L\Profiles\%U + +# All NetBIOS names must be resolved to IP Addresses +# 'Name Resolve Order' allows the named resolution mechanism to be specified +# the default order is "host lmhosts wins bcast". "host" means use the unix +# system gethostbyname() function call that will use either /etc/hosts OR +# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf +# and the /etc/resolv.conf file. "host" therefore is system configuration +# dependant. This parameter is most often of use to prevent DNS lookups +# in order to resolve NetBIOS names to IP Addresses. Use with care! +# The example below excludes use of name resolution for machines that are NOT +# on the local network segment +# - OR - are not deliberately to be known via lmhosts or via WINS. +; name resolve order = wins lmhosts bcast + +# Windows Internet Name Serving Support Section: +# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server +; wins support = yes + +# WINS Server - Tells the NMBD components of Samba to be a WINS Client +# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both +; wins server = w.x.y.z + +# WINS Proxy - Tells Samba to answer name resolution queries on +# behalf of a non WINS capable client, for this to work there must be +# at least one WINS Server on the network. The default is NO. +; wins proxy = yes + +# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names +# via DNS nslookups. The built-in default for versions 1.9.17 is yes, +# this has been changed in version 1.9.18 to no. + dns proxy = no + +# Case Preservation can be handy - system default is _no_ +# NOTE: These can be set on a per share basis +; preserve case = no +; short preserve case = no +# Default case is normally upper case for all DOS files +; default case = lower +# Be very careful with case sensitivity - it can break things! +; case sensitive = no + +#============================ Share Definitions ============================== +[homes] + comment = Home Directories + browseable = no + writable = yes + +# Un-comment the following and create the netlogon directory for Domain Logons +; [netlogon] +; comment = Network Logon Service +; path = /home/samba/netlogon +; guest ok = yes +; writable = no +; share modes = no + + +# Un-comment the following to provide a specific roving profile share +# the default is to use the user's home directory +;[Profiles] +; path = /home/samba/profiles +; browseable = no +; guest ok = yes + + +# NOTE: If you have a CUPS print system there is no need to +# specifically define each individual printer. +# You must configure the samba printers with the appropriate Windows +# drivers on your Windows clients. On the Samba server no filtering is +# done. If you wish that the server provides the driver and the clients +# send PostScript ("Generic PostScript Printer" under Windows), you have +# to swap the 'print command' line below with the commented one. +[printers] + comment = All Printers + path = /var/spool/samba + browseable = yes +# to allow user 'guest account' to print. + guest ok = yes + writable = no + printable = yes + create mode = 0700 +# ===================================== +# print command: see above for details. +# ===================================== + print command = lpr-cups -P %p -o raw %s -r # using client side printer drivers. +; print command = lpr-cups -P %p %s # using cups own drivers (use generic PostScript on clients). + lpq command = lpstat -o %p + lprm command = cancel %p-%j + +# This one is useful for people to share files +;[tmp] +; comment = Temporary file space +; path = /tmp +; read only = no +; public = yes + +# A publicly accessible directory, but read only, except for people in +# the "staff" group +;[public] +; comment = Public Stuff +; path = /home/samba/public +; public = yes +; writable = no +; write list = @staff + +# Other examples. +# +# A private printer, usable only by fred. Spool data will be placed in fred's +# home directory. Note that fred must have write access to the spool directory, +# wherever it is. +;[fredsprn] +; comment = Fred's Printer +; valid users = fred +; path = /homes/fred +; printer = freds_printer +; public = no +; writable = no +; printable = yes + +# A private directory, usable only by fred. Note that fred requires write +# access to the directory. +;[fredsdir] +; comment = Fred's Service +; path = /usr/somewhere/private +; valid users = fred +; public = no +; writable = yes +; printable = no + +# a service which has a different directory for each machine that connects +# this allows you to tailor configurations to incoming machines. You could +# also use the %u option to tailor it by user name. +# The %m gets replaced with the machine name that is connecting. +;[pchome] +; comment = PC Directories +; path = /usr/pc/%m +; public = no +; writable = yes + +# A publicly accessible directory, read/write to all users. Note that all files +# created in the directory by users will be owned by the default user, so +# any user with access can delete any other user's files. Obviously this +# directory must be writable by the default user. Another user could of course +# be specified, in which case all files would be owned by that user instead. +;[public] +; path = /usr/somewhere/else/public +; public = yes +; only guest = yes +; writable = yes +; printable = no + +# The following two entries demonstrate how to share a directory so that two +# users can place files there that will be owned by the specific users. In this +# setup, the directory should be writable by both users and should have the +# sticky bit set on it to prevent abuse. Obviously this could be extended to +# as many users as required. +;[myshare] +; comment = Mary's and Fred's stuff +; path = /usr/somewhere/shared +; valid users = mary fred +; public = no +; writable = yes +; printable = no +; create mask = 0765 + + diff --git a/packaging/Mandrake/smb.init b/packaging/Mandrake/smb.init new file mode 100755 index 0000000000..31b2deee57 --- /dev/null +++ b/packaging/Mandrake/smb.init @@ -0,0 +1,93 @@ +#!/bin/sh +# +# chkconfig: - 91 35 +# description: Starts and stops the Samba smbd and nmbd daemons \ +# used to provide SMB network services. + +# Source function library. +if [ -f /etc/init.d/functions ] ; then + . /etc/init.d/functions +elif [ -f /etc/rc.d/init.d/functions ] ; then + . /etc/rc.d/init.d/functions +else + exit 0 +fi + +# Source networking configuration. +. /etc/sysconfig/network + +# Check that networking is up. +[ ${NETWORKING} = "no" ] && exit 0 + +# Check that smb.conf exists. +[ -f /etc/smb.conf ] || exit 0 + +RETVAL=0 + + +start() { + echo -n "Starting SMB services: " + daemon smbd -D + RETVAL=$? + echo + echo -n "Starting NMB services: " + daemon nmbd -D + RETVAL2=$? + echo + [ $RETVAL -eq 0 -a $RETVAL2 -eq 0 ] && touch /var/lock/subsys/smb || \ + RETVAL=1 + return $RETVAL +} +stop() { + echo -n "Shutting down SMB services: " + killproc smbd + RETVAL=$? + echo + echo -n "Shutting down NMB services: " + killproc nmbd + RETVAL2=$? + [ $RETVAL -eq 0 -a $RETVAL2 -eq 0 ] && rm -f /var/lock/subsys/smb + echo "" + return $RETVAL +} +restart() { + stop + start +} +reload() { + echo -n "Reloading smb.conf file: " + killproc smbd -HUP + RETVAL=$? + echo + return $RETVAL +} +mdkstatus() { + status smbd + status nmbd +} + +case "$1" in + start) + start + ;; + stop) + stop + ;; + restart) + restart + ;; + reload) + reload + ;; + status) + mdkstatus + ;; + condrestart) + [ -f /var/lock/subsys/smb ] && restart || : + ;; + *) + echo "Usage: $0 {start|stop|restart|status|condrestart}" + exit 1 +esac + +exit $? diff --git a/packaging/Mandrake/smbprint b/packaging/Mandrake/smbprint new file mode 100755 index 0000000000..0d07c9c783 --- /dev/null +++ b/packaging/Mandrake/smbprint @@ -0,0 +1,77 @@ +#!/bin/sh + +# This script is an input filter for printcap printing on a unix machine. It +# uses the smbclient program to print the file to the specified smb-based +# server and service. +# For example you could have a printcap entry like this +# +# smb:lp=/dev/null:sd=/usr/spool/smb:sh:if=/usr/local/samba/smbprint +# +# which would create a unix printer called "smb" that will print via this +# script. You will need to create the spool directory /usr/spool/smb with +# appropriate permissions and ownerships for your system. + +# Set these to the server and service you wish to print to +# In this example I have a WfWg PC called "lapland" that has a printer +# exported called "printer" with no password. + +# +# Script further altered by hamiltom@ecnz.co.nz (Michael Hamilton) +# so that the server, service, and password can be read from +# a /var/spool/lpd/PRINTNAME/.config file. +# +# In order for this to work the /etc/printcap entry must include an +# accounting file (af=...): +# +# cdcolour:\ +# :cm=CD IBM Colorjet on 6th:\ +# :sd=/var/spool/lpd/cdcolour:\ +# :af=/var/spool/lpd/cdcolour/acct:\ +# :if=/usr/local/etc/smbprint:\ +# :mx=0:\ +# :lp=/dev/null: +# +# The /usr/var/spool/lpd/PRINTNAME/.config file should contain: +# server=PC_SERVER +# service=PR_SHARENAME +# password="password" +# +# E.g. +# server=PAULS_PC +# service=CJET_371 +# password="" + +# +# Debugging log file, change to /dev/null if you like. +# +# logfile=/tmp/smb-print.log +logfile=/dev/null + + +# +# The last parameter to the filter is the accounting file name. +# Extract the directory name from the file name. +# Concat this with /.config to get the config file. +# +eval acct_file=\${$#} +spool_dir=`dirname $acct_file` +config_file=$spool_dir/.config + +# Should read the following variables set in the config file: +# server +# service +# password +eval `cat $config_file` + +# +# Some debugging help, change the >> to > if you want to same space. +# +echo "server $server, service $service" >> $logfile + +( +# NOTE You may wish to add the line `echo translate' if you want automatic +# CR/LF translation when printing. +# echo translate + echo "print -" + cat +) | /usr/bin/smbclient "//$server/$service" $password -U $server -N -P >> $logfile diff --git a/packaging/Mandrake/smbusers b/packaging/Mandrake/smbusers new file mode 100644 index 0000000000..ae3389f53f --- /dev/null +++ b/packaging/Mandrake/smbusers @@ -0,0 +1,3 @@ +# Unix_name = SMB_name1 SMB_name2 ... +root = administrator admin +nobody = guest pcguest smbguest |