diff options
| -rw-r--r-- | packaging/LSB/README | 6 | ||||
| -rw-r--r-- | packaging/LSB/lsb-samba.spec | 100 | ||||
| -rwxr-xr-x | packaging/LSB/samba.sh | 80 | ||||
| -rw-r--r-- | packaging/LSB/samba.xinetd | 15 | ||||
| -rw-r--r-- | packaging/LSB/smb.conf | 290 |
5 files changed, 491 insertions, 0 deletions
diff --git a/packaging/LSB/README b/packaging/LSB/README new file mode 100644 index 0000000000..4ff0b99d76 --- /dev/null +++ b/packaging/LSB/README @@ -0,0 +1,6 @@ +README.lsb - 1 July 2001 +------------------------ + +The files in this directory allow you to build an LSB-compliant +version of SAMBA using the RPM software and the LSB development +environment. diff --git a/packaging/LSB/lsb-samba.spec b/packaging/LSB/lsb-samba.spec new file mode 100644 index 0000000000..516eaa430e --- /dev/null +++ b/packaging/LSB/lsb-samba.spec @@ -0,0 +1,100 @@ +# +# "$Id: lsb-samba.spec,v 1.2 2001/07/03 01:01:12 jra Exp $" +# +# Linux Standards Based RPM "spec" file for SAMBA. +# + +Summary: SAMBA +Name: lsb-samba +Version: 2.2.1 +Release: 0 +Copyright: GPL +Group: System Environment/Daemons +Source: ftp://ftp.samba.org/pub/samba/samba-%{version}.tar.gz +Url: http://www.samba.org +Packager: Michael Sweet <mike@easysw.com> +Vendor: SAMBA Team + +# Require the "lsb" package, which guarantees LSB compliance. +Requires: lsb + +# use BuildRoot so as not to disturb the version already installed +BuildRoot: /var/tmp/%{name}-root + +%description + +%prep +%setup + +%build +export LDFLAGS="-L/usr/lib/lsb --dynamic-linker=/lib/ld-lsb.so.1" + +./configure --with-fhs --prefix=/usr --sysconfdir=/etc \ + --sharedstatedir=/var --datadir=/usr/share \ + --with-configdir=/etc/samba \ + --with-swatdir=/usr/share/samba/swat + +# If we got this far, all prerequisite libraries must be here. +make + +%install +# Make sure the RPM_BUILD_ROOT directory exists. +rm -rf $RPM_BUILD_ROOT +mkdir $RPM_BUILD_ROOT + +make \ + BASEDIR=$RPM_BUILD_ROOT/usr \ + BINDIR=$RPM_BUILD_ROOT/usr/bin \ + CODEPAGEDIR=$RPM_BUILD_ROOT/usr/share/samba/codepages \ + CONFIGDIR=$RPM_BUILD_ROOT/etc/samba \ + INCLUDEDIR=$RPM_BUILD_ROOT/usr/include \ + LIBDIR=$RPM_BUILD_ROOT/usr/lib \ + LOCKDIR=$RPM_BUILD_ROOT/var/lock/samba \ + LOGFILEBASE=$RPM_BUILD_ROOT/var/log/samba \ + MANDIR=$RPM_BUILD_ROOT/usr/share/man \ + SBINDIR=$RPM_BUILD_ROOT/usr/sbin \ + SWATDIR=$RPM_BUILD_ROOT/usr/share/samba/swat \ + VARDIR=$RPM_BUILD_ROOT/var \ + install + +mkdir -p $RPM_BUILD_ROOT/etc/init.d +install -m 700 packaging/LSB/samba.sh /etc/init.d/samba + +mkdir -p $RPM_BUILD_ROOT/etc/samba +install -m 644 packaging/LSB/smb.conf /etc/samba + +mkdir -p $RPM_BUILD_ROOT/etc/xinetd.d +install -m 644 packaging/LSB/samba.xinetd /etc/xinetd.d/samba + +%post +/usr/lib/lsb/install_initd /etc/init.d/samba + +%preun +/usr/lib/lsb/remove_initd /etc/init.d/samba + +%clean +rm -rf $RPM_BUILD_ROOT + +%files +%defattr(-,root,root) +%dir /etc/init.d +/etc/init.d/samba +%dir /etc/samba +%config(noreplace) /etc/samba/smb.conf +%dir /etc/samba/private +%dir /etc/xinetd.d +%config(noreplace) /etc/xinetd.d/samba +%dir /usr/bin +/usr/bin/* +%dir /usr/sbin +/usr/sbin/* +%dir /usr/share/man +/usr/share/man/* +%dir /usr/share/samba +/usr/share/samba/* +%dir /var/lock/samba +%dir /var/log/samba + +# +# End of "$Id: lsb-samba.spec,v 1.2 2001/07/03 01:01:12 jra Exp $". +# diff --git a/packaging/LSB/samba.sh b/packaging/LSB/samba.sh new file mode 100755 index 0000000000..99fa1b0117 --- /dev/null +++ b/packaging/LSB/samba.sh @@ -0,0 +1,80 @@ +#!/bin/sh +# +# "$Id: samba.sh,v 1.2 2001/07/03 01:01:12 jra Exp $" +# +# SAMBA startup (init) script for LSB-compliant systems. +# +# Provides: smbd nmbd +# Required-Start: 3 5 +# Required-Stop: 0 2 1 6 +# Default-Start: 3 5 +# Default-Stop: 0 2 1 6 +# Description: Starts and stops the SAMBA smbd and nmbd daemons \ +# used to provide SMB network services. +# + +# Source LSB function library. +. /lib/lsb/init-functions + +# Check that smb.conf exists. +if test ! -f /etc/samba/smb.conf; then + log_failure_msg "The smb.conf file does not exist." + exit 6 +fi + +# Make sure that smbd and nmbd exist... +if test ! -f /usr/sbin/nmbd -o ! -f /usr/sbin/smbd; then + log_failure_msg "The nmbd and/or smbd daemons are not installed." + exit 5 +fi + +# See how we were called. +case "$1" in + start) + start_daemon nmbd -D + start_daemon smbd -D + log_success_msg "Started SMB services." + ;; + + stop) + killproc smbd + killproc nmbd + log_success_msg "Shutdown SMB services." + ;; + + reload) + # smbd and nmbd automatically re-read the smb.conf file... + log_success_msg "Reload not necessary with SAMBA." + ;; + + status) + if test -z "`pidofproc smbd`"; then + log_success_msg "smbd is not running." + else + log_success_msg "smbd is running." + fi + if test -z "`pidofproc nmbd`"; then + log_success_msg "nmbd is not running." + else + log_success_msg "nmbd is running." + fi + ;; + + + restart | force-reload) + $0 stop + $0 start + ;; + + *) + echo "Usage: smb {start|stop|reload|force-reload|restart|status}" + exit 1 + ;; +esac + +# Return "success" +exit 0 + +# +# End of "$Id: samba.sh,v 1.2 2001/07/03 01:01:12 jra Exp $". +# diff --git a/packaging/LSB/samba.xinetd b/packaging/LSB/samba.xinetd new file mode 100644 index 0000000000..8c38b35421 --- /dev/null +++ b/packaging/LSB/samba.xinetd @@ -0,0 +1,15 @@ +# default: off +# description: SWAT is the Samba Web Admin Tool. Use swat \ +# to configure your Samba server. To use SWAT, \ +# connect to port 901 with your favorite web browser. +service swat +{ + port = 901 + socket_type = stream + wait = no + only_from = localhost + user = root + server = /usr/sbin/swat + log_on_failure += USERID + disable = yes +} diff --git a/packaging/LSB/smb.conf b/packaging/LSB/smb.conf new file mode 100644 index 0000000000..71ff946388 --- /dev/null +++ b/packaging/LSB/smb.conf @@ -0,0 +1,290 @@ +# This is the main Samba configuration file. You should read the +# smb.conf(5) manual page in order to understand the options listed +# here. Samba has a huge number of configurable options (perhaps too +# many!) most of which are not shown in this example +# +# Any line which starts with a ; (semi-colon) or a # (hash) +# is a comment and is ignored. In this example we will use a # +# for commentry and a ; for parts of the config file that you +# may wish to enable +# +# NOTE: Whenever you modify this file you should run the command "testparm" +# to check that you have not made any basic syntactic errors. +# +#======================= Global Settings ===================================== +[global] + +# workgroup = NT-Domain-Name or Workgroup-Name + workgroup = MYGROUP + +# server string is the equivalent of the NT Description field + server string = Samba Server + +# This option is important for security. It allows you to restrict +# connections to machines which are on your local network. The +# following example restricts access to two C class networks and +# the "loopback" interface. For more examples of the syntax see +# the smb.conf man page +; hosts allow = 192.168.1. 192.168.2. 127. + +# if you want to automatically load your printer list rather +# than setting them up individually then you'll need this + printcap name = /etc/printcap + load printers = yes + +# It should not be necessary to spell out the print system type unless +# yours is non-standard. Currently supported print systems include: +# bsd, sysv, plp, lprng, aix, hpux, qnx +; printing = bsd + +# Uncomment this if you want a guest account, you must add this to /etc/passwd +# otherwise the user "nobody" is used +; guest account = pcguest + +# this tells Samba to use a separate log file for each machine +# that connects + log file = /var/log/samba/log.%m + +# Put a capping on the size of the log files (in Kb). + max log size = 50 + +# Security mode. Most people will want user level security. See +# security_level.txt for details. + security = user +# Use password server option only with security = server +; password server = <NT-Server-Name> + +# Password Level allows matching of _n_ characters of the password for +# all combinations of upper and lower case. +; password level = 8 +; username level = 8 + +# You may wish to use password encryption. Please read +# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. +# Do not enable this option unless you have read those documents +; encrypt passwords = yes +; smb passwd file = /etc/samba/smbpasswd + +# The following are needed to allow password changing from Windows to +# update the Linux sytsem password also. +# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above. +# NOTE2: You do NOT need these to allow workstations to change only +# the encrypted SMB passwords. They allow the Unix password +# to be kept in sync with the SMB password. +; unix password sync = Yes +; passwd program = /usr/bin/passwd %u +; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully* + +# Unix users can map to different SMB User names +; username map = /etc/samba/smbusers + +# Using the following line enables you to customise your configuration +# on a per machine basis. The %m gets replaced with the netbios name +# of the machine that is connecting +; include = /etc/samba/smb.conf.%m + +# Most people will find that this option gives better performance. +# See speed.txt and the manual pages for details + socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 + +# Configure Samba to use multiple interfaces +# If you have multiple network interfaces then you must list them +# here. See the man page for details. +; interfaces = 192.168.12.2/24 192.168.13.2/24 + +# Configure remote browse list synchronisation here +# request announcement to, or browse list sync from: +# a specific host or from / to a whole subnet (see below) +; remote browse sync = 192.168.3.25 192.168.5.255 +# Cause this host to announce itself to local subnets here +; remote announce = 192.168.1.255 192.168.2.44 + +# Browser Control Options: +# set local master to no if you don't want Samba to become a master +# browser on your network. Otherwise the normal election rules apply +; local master = no + +# OS Level determines the precedence of this server in master browser +# elections. The default value should be reasonable +; os level = 33 + +# Domain Master specifies Samba to be the Domain Master Browser. This +# allows Samba to collate browse lists between subnets. Don't use this +# if you already have a Windows NT domain controller doing this job +; domain master = yes + +# Preferred Master causes Samba to force a local browser election on startup +# and gives it a slightly higher chance of winning the election +; preferred master = yes + +# Use only if you have an NT server on your network that has been +# configured at install time to be a primary domain controller. +; domain controller = <NT-Domain-Controller-SMBName> + +# Enable this if you want Samba to be a domain logon server for +# Windows95 workstations. +; domain logons = yes + +# if you enable domain logons then you may want a per-machine or +# per user logon script +# run a specific logon batch file per workstation (machine) +; logon script = %m.bat +# run a specific logon batch file per username +; logon script = %U.bat + +# Where to store roving profiles (only for Win95 and WinNT) +# %L substitutes for this servers netbios name, %U is username +# You must uncomment the [Profiles] share below +; logon path = \\%L\Profiles\%U + +# All NetBIOS names must be resolved to IP Addresses +# 'Name Resolve Order' allows the named resolution mechanism to be specified +# the default order is "host lmhosts wins bcast". "host" means use the unix +# system gethostbyname() function call that will use either /etc/hosts OR +# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf +# and the /etc/resolv.conf file. "host" therefore is system configuration +# dependant. This parameter is most often of use to prevent DNS lookups +# in order to resolve NetBIOS names to IP Addresses. Use with care! +# The example below excludes use of name resolution for machines that are NOT +# on the local network segment +# - OR - are not deliberately to be known via lmhosts or via WINS. +; name resolve order = wins lmhosts bcast + +# Windows Internet Name Serving Support Section: +# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server +; wins support = yes + +# WINS Server - Tells the NMBD components of Samba to be a WINS Client +# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both +; wins server = w.x.y.z + +# WINS Proxy - Tells Samba to answer name resolution queries on +# behalf of a non WINS capable client, for this to work there must be +# at least one WINS Server on the network. The default is NO. +; wins proxy = yes + +# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names +# via DNS nslookups. The built-in default for versions 1.9.17 is yes, +# this has been changed in version 1.9.18 to no. + dns proxy = no + +# Case Preservation can be handy - system default is _no_ +# NOTE: These can be set on a per share basis +; preserve case = no +; short preserve case = no +# Default case is normally upper case for all DOS files +; default case = lower +# Be very careful with case sensitivity - it can break things! +; case sensitive = no + +#============================ Share Definitions ============================== +[homes] + comment = Home Directories + browseable = no + writable = yes + +# Un-comment the following and create the netlogon directory for Domain Logons +; [netlogon] +; comment = Network Logon Service +; path = /home/netlogon +; guest ok = yes +; writable = no +; share modes = no + + +# Un-comment the following to provide a specific roving profile share +# the default is to use the user's home directory +;[Profiles] +; path = /home/profiles +; browseable = no +; guest ok = yes + + +# NOTE: If you have a BSD-style print system there is no need to +# specifically define each individual printer +[printers] + comment = All Printers + path = /var/spool/samba + browseable = no +# Set public = yes to allow user 'guest account' to print + guest ok = no + writable = no + printable = yes + +# This one is useful for people to share files +;[tmp] +; comment = Temporary file space +; path = /tmp +; read only = no +; public = yes + +# A publicly accessible directory, but read only, except for people in +# the "staff" group +;[public] +; comment = Public Stuff +; path = /home/samba +; public = yes +; read only = yes +; write list = @staff + +# Other examples. +# +# A private printer, usable only by fred. Spool data will be placed in fred's +# home directory. Note that fred must have write access to the spool directory, +# wherever it is. +;[fredsprn] +; comment = Fred's Printer +; valid users = fred +; path = /homes/fred +; printer = freds_printer +; public = no +; writable = no +; printable = yes + +# A private directory, usable only by fred. Note that fred requires write +# access to the directory. +;[fredsdir] +; comment = Fred's Service +; path = /usr/somewhere/private +; valid users = fred +; public = no +; writable = yes +; printable = no + +# a service which has a different directory for each machine that connects +# this allows you to tailor configurations to incoming machines. You could +# also use the %u option to tailor it by user name. +# The %m gets replaced with the machine name that is connecting. +;[pchome] +; comment = PC Directories +; path = /usr/pc/%m +; public = no +; writable = yes + +# A publicly accessible directory, read/write to all users. Note that all files +# created in the directory by users will be owned by the default user, so +# any user with access can delete any other user's files. Obviously this +# directory must be writable by the default user. Another user could of course +# be specified, in which case all files would be owned by that user instead. +;[public] +; path = /usr/somewhere/else/public +; public = yes +; only guest = yes +; writable = yes +; printable = no + +# The following two entries demonstrate how to share a directory so that two +# users can place files there that will be owned by the specific users. In this +# setup, the directory should be writable by both users and should have the +# sticky bit set on it to prevent abuse. Obviously this could be extended to +# as many users as required. +;[myshare] +; comment = Mary's and Fred's stuff +; path = /usr/somewhere/shared +; valid users = mary fred +; public = no +; writable = yes +; printable = no +; create mask = 0765 + + |