summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--packaging/Debian/debian/patches/documentation.patch123
-rw-r--r--packaging/Debian/debian/patches/fhs.patch2
2 files changed, 60 insertions, 65 deletions
diff --git a/packaging/Debian/debian/patches/documentation.patch b/packaging/Debian/debian/patches/documentation.patch
index 5ced2f0e4b..65f7421ab4 100644
--- a/packaging/Debian/debian/patches/documentation.patch
+++ b/packaging/Debian/debian/patches/documentation.patch
@@ -17,90 +17,85 @@ diff -uNr samba-2.999+3.0.alpha21.orig/docs/htmldocs/using_samba/ch06_05.html sa
domain logons = yes
security = user </pre></div><DIV CLASS="sect3">
-diff -uNr samba-2.999+3.0.alpha21.orig/docs/manpages/swat.8 samba-2.999+3.0.alpha21/docs/manpages/swat.8
---- samba-2.999+3.0.alpha21.orig/docs/manpages/swat.8 2002-11-26 20:54:13.000000000 -0600
-+++ samba-2.999+3.0.alpha21/docs/manpages/swat.8 2002-12-16 23:15:46.000000000 -0600
-@@ -42,19 +42,26 @@
- server. \fR
+--- samba-2.2.2.cvs20020120.orig/swat/README
++++ samba-2.2.2.cvs20020120/swat/README
+@@ -1,3 +1,11 @@
++[Debian-specific Note: you can safely skip the installation notes in
++this document. swat was configured for you when the package was
++installed. For security reasons, swat is not enabled. To enable it, you
++need to edit /etc/inetd.conf, uncomment the swat entry, and reload
++inetd. Please note that the file locations given in this file are not
++correct for the Debian version of swat. The correct file locations are
++given in swat's man page.]
++
+ This is a brief description of how to install and use the Samba Web
+ Administration Tool on your machine.
+
+--- samba_3_0/docs/manpages/swat.8.orig 2003-06-06 16:16:24.000000000 -0400
++++ samba_3_0/docs/manpages/swat.8 2003-06-06 16:25:13.000000000 -0400
+@@ -89,6 +89,13 @@
.SH "INSTALLATION"
+
.PP
+\fBDebian-specific Note\fR: all these steps have already been done for
+you. However, by default, swat is not enabled. This has been done for
+security reasons. To enable swat you need to edit /etc/inetd.conf,
+uncomment the swat entry (usually at the end of the file), and then
+restart inetd.
++
+.PP
- After you compile SWAT you need to run \fBmake install
- \fR to install the \fBswat\fR binary
--and the various help files and images. A default install would put
--these in:
-+and the various help files and images. Under \fBDebian\fR, these
-+files are in (please note that these locations are different than the
-+default location):
- .TP 0.2i
+ Swat is included as binary package with most distributions\&. The package manager in this case takes care of the installation and configuration\&. This section is only for those who have compiled swat from scratch\&.
+
+ .PP
+@@ -96,15 +103,15 @@
+
+ .TP 3
\(bu
-/usr/local/samba/bin/swat
-+/usr/sbin/*
- .TP 0.2i
++/usr/sbin/swat
+
+ .TP
\(bu
-/usr/local/samba/swat/images/*
+/usr/share/samba/swat/images/*
- .TP 0.2i
+
+ .TP
\(bu
-/usr/local/samba/swat/help/*
+/usr/share/samba/swat/help/*
- .SS "INETD INSTALLATION"
- .PP
- You need to edit your \fI/etc/inetd.conf
-@@ -62,7 +69,7 @@
- to enable SWAT to be launched via \fBinetd\fR.
- .PP
- In \fI/etc/services\fR you need to
--add a line like this:
-+add a line like this (not needed for Debian):
+
+ .LP
+
+@@ -114,7 +121,7 @@
+ You need to edit your \fI/etc/inetd\&.conf \fR and \fI/etc/services\fR to enable SWAT to be launched via \fBinetd\fR\&.
+
.PP
- \fBswat 901/tcp\fR
+-In \fI/etc/services\fR you need to add a line like this:
++In \fI/etc/services\fR you need to add a line like this (not needed for Debian):
+
.PP
-@@ -76,10 +83,11 @@
- \fBinetd\fR daemon).
+ \fBswat 901/tcp\fR
+@@ -126,10 +133,10 @@
+ the choice of port number isn't really important except that it should be less than 1024 and not currently used (using a number above 1024 presents an obscure security hole depending on the implementation details of your\fBinetd\fR daemon)\&.
+
.PP
- In \fI/etc/inetd.conf\fR you should
--add a line like this:
-+add a line like this (not needed for Debian, the postinst script takes
-+care of this):
+-In \fI/etc/inetd\&.conf\fR you should add a line like this:
++In \fI/etc/inetd\&.conf\fR you should add a line like this (not needed for Debian since the maintainer scripts do it. You need to uncomment the line, though, because it is added commented out for security reasons):
+
.PP
- \fBswat stream tcp nowait.400 root
--/usr/local/samba/bin/swat swat\fR
-+/usr/sbin/swat swat\fR
+-\fBswat stream tcp nowait.400 root /usr/local/samba/bin/swat swat\fR
++\fBswat stream tcp nowait.400 root /usr/sbin/swat swat\fR
+
.PP
- One you have edited \fI/etc/services\fR
- and \fI/etc/inetd.conf\fR you need to send a
-@@ -105,11 +113,10 @@
- (e.g., swat) to service port (e.g., 901) and protocol type
- (e.g., tcp).
+ One you have edited \fI/etc/services\fR and \fI/etc/inetd\&.conf\fR you need to send a HUP signal to inetd\&. To do this use \fBkill -1 PID \fR where PID is the process ID of the inetd daemon\&.
+@@ -155,8 +162,8 @@
+
+
.TP
--\fB\fI/usr/local/samba/lib/smb.conf\fB\fR
-+\fB\fI/etc/samba/smb.conf\fB\fR
- This is the default location of the \fIsmb.conf(5)
--\fR server configuration file that swat edits. Other
--common places that systems install this file are \fI /usr/samba/lib/smb.conf\fR and \fI/etc/smb.conf
--\fR. This file describes all the services the server
-+\fRserver configuration file that swat edits.
-+This file describes all the services the server
- is to make available to clients.
- .SH "WARNINGS"
- .PP
---- samba-2.2.2.cvs20020120.orig/swat/README
-+++ samba-2.2.2.cvs20020120/swat/README
-@@ -1,3 +1,11 @@
-+[Debian-specific Note: you can safely skip the installation notes in
-+this document. swat was configured for you when the package was
-+installed. For security reasons, swat is not enabled. To enable it, you
-+need to edit /etc/inetd.conf, uncomment the swat entry, and reload
-+inetd. Please note that the file locations given in this file are not
-+correct for the Debian version of swat. The correct file locations are
-+given in swat's man page.]
-+
- This is a brief description of how to install and use the Samba Web
- Administration Tool on your machine.
+-\fI/usr/local/samba/lib/smb\&.conf\fR
+-This is the default location of the \fBsmb.conf\fR(5) server configuration file that swat edits\&. Other common places that systems install this file are \fI /usr/samba/lib/smb\&.conf\fR and \fI/etc/smb\&.conf \fR\&. This file describes all the services the server is to make available to clients\&.
++\fI/etc/samba/smb\&.conf\fR
++This is the default location of the \fBsmb.conf\fR(5) server configuration file that swat edits\&. This file describes all the services the server is to make available to clients\&.
+
+ .SH "WARNINGS"
diff --git a/packaging/Debian/debian/patches/fhs.patch b/packaging/Debian/debian/patches/fhs.patch
index bc2df4d414..dd66188cbe 100644
--- a/packaging/Debian/debian/patches/fhs.patch
+++ b/packaging/Debian/debian/patches/fhs.patch
@@ -335,7 +335,7 @@ diff -uNr samba-3.0alpha23.orig/source/param/loadparm.c samba-3.0alpha23/source/
char *szLockDir;
char *szPidDir;
char *szRootdir;
-@@ -1052,8 +1055,13 @@
+@@ -1055,8 +1058,13 @@
{"config file", P_STRING, P_GLOBAL, &Globals.szConfigFile, NULL, NULL, FLAG_HIDE},
{"preload", P_STRING, P_GLOBAL, &Globals.szAutoServices, NULL, NULL, FLAG_ADVANCED | FLAG_DEVELOPER},
{"auto services", P_STRING, P_GLOBAL, &Globals.szAutoServices, NULL, NULL, FLAG_ADVANCED | FLAG_DEVELOPER},