diff options
24 files changed, 3381 insertions, 0 deletions
diff --git a/docs/docbook/projdoc/CUPS-printing.sgml b/docs/docbook/projdoc/CUPS-printing.sgml new file mode 100644 index 0000000000..a932127d94 --- /dev/null +++ b/docs/docbook/projdoc/CUPS-printing.sgml @@ -0,0 +1,1357 @@ +<chapter id="CUPS-printing"> + + +<chapterinfo> + <author> + <firstname>John H</firstname><surname>Terpstra</surname> + <affiliation> + <orgname>Samba Team</orgname> + <address> + <email>jht@samba.org</email> + </address> + </affiliation> + </author> + <author> + <firstname>Kurt</firstname><surname>Pfeifle</surname> + <affiliation> + <address><email>kpfeifle@danka.de</email></address> + </affiliation> + </author> + <pubdate> (25 March 2003) </pubdate> +</chapterinfo> + +<title>CUPS Printing Support</title> + +<sect1> +<title>Introduction</title> + +<para> +The Common Unix Print System (CUPS) has become very popular, but to many it is +a very mystical tool. There is a great deal of uncertainty regarding CUPS and how +it works. The result is seen in a large number of posting on the samba mailing lists +expressing frustration when MS Windows printers appear not to work with a CUPS +backr-end. +/para> + +<para> +This is a good time to point out how CUPS can be used and what it does. CUPS is more +than just a print spooling system - it is a complete printer management system that +complies with HTTP and IPP protocols. It can be managed remotely via a web browser +and it can print using http and ipp protocols. +</para> + +<para> +CUPS allows to creation of RAW printers (ie: NO file format translation) as well as +SMART printers (ie: CUPS does file format conversion as required for the printer). In +many ways this gives CUPS similar capabilities to the MS Windows print monitoring +system. Of course, if you are a CUPS advocate, you would agrue that CUPS is better! +In any case, let us now move on to explore how one may configure CUPS for interfacing +with MS Windows print clients via Samba. +</para> + +</sect1> + +<sect1> +<title>CUPS - RAW Print Through Mode</title> + +<para> +When CUPS printers are configured for RAW print-through mode operation it is the +responsibility of the Samba client to fully render the print job (file) in a format +that is suitable for direct delivery to the printer. In this case CUPS will NOT +do any print file format conversion work. +</para> + +<para> +The CUPS files that need to be correctly set for RAW mode printers to work are: + +<itemizedlist> + <listitem><para><filename>/etc/cups/mime.types</filename><para></listitem> + <listitem><para><filename>/etc/cups/mime.convs</filename><para></listitem> +</itemizedlist> + +Both contain entries that must be uncommented to allow <emphasis>RAW</emphasis> mode +operation. +</para> + +<para> +Firstly, to enable CUPS based printing from Samba the following options must be +enabled in your smb.conf file [globals] section: + +<itemizedlist> + <listitem><para>printing = CUPS</para></listitem> + + <listitem><para>printcap = CUPS</para></listitem> +</itemizedlist> + +When these parameters are specified the print directives in smb.conf (as well as in +samba itself) will be ignored because samba will directly interface with CUPS through +it's application program interface (API) - so long as Samba has been compiled with +CUPS library (libcups) support. If samba has NOT been compiled with CUPS support then +printing will use the System V AT&T command set with the <emphasis>-oraw</emphasis> +option automatically passing through. +</para> + +<para> +Cupsomatic (an enhanced printing utility that is part of some CUPS implementations) +on the Samba/CUPS server does *not* add any features if a file is really +printed "raw". However, if you have loaded the driver for the Windows client from +the CUPS server, using the "cupsaddsmb" utility, and if this driver is one using +a "Foomatic" PPD, the PJL header in question is already added on the Windows client, +at the time when the driver initially generated the PostScript data and CUPS in true +"-oraw" manner doesn't remove this PJL header and passes the file "as is" to its +printer communication backend. +</para> + +<note><para>NOTE: editing in the "mime.convs" and the "mime.types" file does not *enforce* +"raw" printing, it only *allows* it.</para></note> + +<para> +Print files that arrive from MS Windows printing are "auto-typed" by CUPS. This aids +the process of determining proper treatment while in the print queue system. + +<itemizedlist> + <listitem><para> + Files generated by PCL drivers and directed at PCK printers get auto-typed as + <filename>application/octet-stream</filename>. Unknown file format types also + get auto-typed with this tag. + </para></listitem> + + <listitem><para> + Files generated by a Postscript driver and directed at a Postscript printer + are auto-typed depending on the auto-detected most suitable MIME type as: + + <itemizedlist> + <listitem><para>* application/postscript</para></listitem> + <listitem><para>* application/vnd.cups-postscript</para></listitem> + </itemizedlist> + </para> +</itemizedlist> +</para> + + +<para> +"application/postscript" first goes thru the "pstops" filter (where the page counting +and accounting takes place). The outcome will be of MIME type +"application/vnd.cups-postscript". The pstopsfilter reads and uses information from +the PPD and inserts user-provided options into the PostScript file. As a consequence, +the filtered file could possibly have an unwanted PJL header. +</para> + +<para> +"application/postscript" will be all files with a ".ps", ".ai", ".eps" suffix or which +have as their first character string one of "%!" or "<04>%". +</para> + +<para> +"application/vnd.cups-postscript" will files which contain the string +"LANGUAGE=POSTSCRIPT" (or similar variations with different capitalization) in the +first 512 bytes, and also contain the "PJL super escape code" in the first 128 bytes +("<1B>%-12345X"). Very likely, most PostScript files generated on Windows using a CUPS +or other PPD, will have to be auto-typed as "vnd.cups-postscript". A file produced +with a "Generic PostScript driver" will just be tagged "application/postscript". +</para> + +<para> +Once the file is in "application/vnd.cups-postscript" format, either "pstoraster" +or "cupsomatic" will take over (depending on the printer configuration, as +determined by the PPD in use). +</para> + +<note><para> +A printer queue with *no* PPD associated to it is a "raw" printer and all files +will go directly there as received by the spooler. The exeptions are file types +"application/octet-stream" which need "passthrough feature" enabled. +"Raw" queues don't do any filtering at all, they hand the file directly to the +CUPS backend. This backend is responsible for the sending of the data to the device +(as in the "device URI" notation as lpd://, socket://, smb://, ipp://, http://, +parallel:/, serial:/, usb:/ etc.) +</para></note> + +<note><para> +"cupsomatic"/Foomatic are *not* native CUPS drivers and they don't ship with CUPS. +They are a Third Party add-on, developed at Linuxprinting.org. As such, they are +a brilliant hack to make all models (driven by Ghostscript drivers/filters in +traditional spoolers) also work via CUPS, with the same (good or bad!) quality +as in these other spoolers. "cupsomatic" is only a vehicle to execute a ghostscript +commandline at that stage in the CUPS filtering chain, where "normally" the native +CUPS "pstoraster" filter would kick in. cupsomatic by-passes pstoraster, "kidnaps" +the printfile from CUPS away and re-directs it to go through Ghostscipt. CUPS accepts this, +because the associated CUPS-O-Matic-/Foomatic-PPD specifies: +</para> + +<programlisting> + *cupsFilter: "application/vnd.cups-postscript 0 cupsomatic" +</programlisting> + +<para> +This line persuades CUPS to hand the file to cupsomatic, once it has successfully +converted it to the MIME type "application/vnd.cups-postscript". This conversion will not +happen for Jobs arriving from Windows which are auto-typed "application/octet-stream", +with the according changes in "/etc/cups/mime.types" in place. +</para></note> + +<para> +CUPS is widely configurable and flexible, even regarding its filtering mechanism. +Another workaround in some situations would be to have +in "/etc/cups/mime.types" entries as follows: +</para> + +<programlisting> + application/postscript application/vnd.cups-raw 0 - + application/vnd.cups-postscript application/vnd.cups-raw 0 - +</programlisting> + +<para> +This would prevent all Postscript files from being filtered (rather, they will go +thru the virtual "nullfilter" denoted with "-"). This could only be useful for +PS printers. If you want to print PS code on non-PS printers an entry as follows +could be useful: +</para> + +<programlisting> + */* application/vnd.cups-raw 0 - +</programlisting> + +<para> +and would effectively send *all* files to the backend without further processing. +</para> + +<para> +Lastly, you could have the following entry: +</para> + +<programlisting> + application/vnd.cups-postscript application/vnd.cups-raw 0 my_PJL_stripping_filter +</programlisting> + +<para> +You will need to write a "my_PJL_stripping_filter" (could be a shellscript) that +parses the PostScript and removes the unwanted PJL. This would need to conform to +CUPS filter design (mainly, receive and pass the parameters printername, job-id, +username, jobtitle, copies, print options and possibly the filename). It would +be installed as world executable into "/usr/lib/cups/filters/" and will be called +by CUPS if it encounters a MIME type "application/vnd.cups-postscript". +</para> + +<para> +CUPS can handle "-o job-hold-until=indefinite". This keeps the job in the queue +"on hold". It will only be printed upon manual release by the printer operator. +This is a requirement in many "central reproduction departments", where a few +operators manage the jobs of hundreds of users on some big machine, where no +user is allowed to have direct access. (The operators often need to load the +proper paper type before running the 10.000 page job requested by marketing +for the mailing, etc.). +</para> + +</sect1> + +<sect1> +<title>The CUPS Filter Chains</title> + +<para> +The following diagrams reveal how CUPS handles print jobs. +</para> + +<programlisting> +######################################################################### +# +# CUPS in and of itself has this (general) filter chain (CAPITAL +# letters are FILE-FORMATS or MIME types, other are filters (this is +# true for pre-1.1.15 of pre-4.3 versions of CUPS and ESP PrintPro): +# +# <replaceable>SOMETHNG</replaceable>-FILEFORMAT +# | +# | +# V +# <replaceable>something</replaceable>tops +# | +# | +# V +# APPLICATION/POSTSCRIPT +# | +# | +# V +# pstops +# | +# | +# V +# APPLICATION/VND.CUPS-POSTSCRIPT +# | +# | +# V +# pstoraster # as shipped with CUPS, independent from any Ghostscipt +# | # installation on the system +# | (= "postscipt interpreter") +# | +# V +# APPLICATION/VND.CUPS-RASTER +# | +# | +# V +# rasterto<replaceable>something</replaceable> (f.e. Gimp-Print filters may be plugged in here) +# | (= "raster driver") +# | +# V +# SOMETHING-DEVICE-SPECIFIC +# | +# | +# V +# backend +# +# +# ESP PrintPro has some enhanced "rasterto<replaceable>something</replaceable>" filters as compared to +# CUPS, and also a somewhat improved "pstoraster" filter. +# +# NOTE: Gimp-Print and some other 3rd-Party-Filters (like TurboPrint) to +# CUPS and ESP PrintPro plug-in where rasterto<replaceable>something</replaceable> is noted. +# +######################################################################### +</programlisting> + +<programlisting> +######################################################################### +# +# This is how "cupsomatic" comes into play: +# ========================================= +# +# <replaceable>SOMETHNG</replaceable>-FILEFORMAT +# | +# | +# V +# <replaceable>something</replaceable>tops +# | +# | +# V +# APPLICATION/POSTSCRIPT +# | +# | +# V +# pstops +# | +# | +# V +# APPLICATION/VND.CUPS-POSTSCRIPT ----------------+ +# | | +# | V +# V cupsomatic +# pstoraster (constructs complicated +# | (= "postscipt interpreter") Ghostscript commandline +# | to let the file be +# V processed by a +# APPLICATION/VND.CUPS-RASTER "-sDEVICE=<replaceable>s.th.</replaceable>" +# | call...) +# | | +# V | +# rasterto<replaceable>something</replaceable> V +# | (= "raster driver") +-------------------------+ +# | | Ghostscript at work.... | +# V | | +# SOMETHING-DEVICE-SPECIFIC *-------------------------+ +# | | +# | | +# V | +# backend >------------------------------------+ +# | +# | +# V +# THE PRINTER +# +# +# Note, that cupsomatic "kidnaps" the printfile after the +# "APPLICATION/VND.CUPS-POSTSCRPT" stage and deviates it through +# the CUPS-external, systemwide Ghostscript installation, bypassing the +# "pstoraster" filter (therefor also bypassing the CUPS-raster-drivers +# "rasterto<replaceable>something</replaceable>", and hands the rasterized file directly to the CUPS +# backend... +# +# cupsomatic is not made by the CUPS developers. It is an independent +# contribution to printing development, made by people from +# Linuxprinting.org. (see also http://www.cups.org/cups-help.html) +# +# NOTE: Gimp-Print and some other 3rd-Party-Filters (like TurboPrint) to +# CUPS and ESP PrintPro plug-in where rasterto<replaceable>something</replaceable> is noted. +# +######################################################################### +</programlisting> + +<programlisting> +######################################################################### +# +# And this is how it works for ESP PrintPro from 4.3: +# =================================================== +# +# <replaceable>SOMETHNG</replaceable>-FILEFORMAT +# | +# | +# V +# <replaceable>something</replaceable>tops +# | +# | +# V +# APPLICATION/POSTSCRIPT +# | +# | +# V +# pstops +# | +# | +# V +# APPLICATION/VND.CUPS-POSTSCRIPT +# | +# | +# V +# gsrip +# | (= "postscipt interpreter") +# | +# V +# APPLICATION/VND.CUPS-RASTER +# | +# | +# V +# rasterto<replaceable>something</replaceable> (f.e. Gimp-Print filters may be plugged in here) +# | (= "raster driver") +# | +# V +# SOMETHING-DEVICE-SPECIFIC +# | +# | +# V +# backend +# +# NOTE: Gimp-Print and some other 3rd-Party-Filters (like TurboPrint) to +# CUPS and ESP PrintPro plug-in where rasterto<replaceable>something</replaceable> is noted. +# +######################################################################### +</programlisting> + +<programlisting> +######################################################################### +# +# This is how "cupsomatic" would come into play with ESP PrintPro: +# ================================================================ +# +# +# <replaceable>SOMETHNG</replaceable>-FILEFORMAT +# | +# | +# V +# <replaceable>something</replaceable>tops +# | +# | +# V +# APPLICATION/POSTSCRIPT +# | +# | +# V +# pstops +# | +# | +# V +# APPLICATION/VND.CUPS-POSTSCRIPT ----------------+ +# | | +# | V +# V cupsomatic +# gsrip (constructs complicated +# | (= "postscipt interpreter") Ghostscript commandline +# | to let the file be +# V processed by a +# APPLICATION/VND.CUPS-RASTER "-sDEVICE=<replaceable>s.th.</replaceable>" +# | call...) +# | | +# V | +# rasterto<replaceable>something</replaceable> V +# | (= "raster driver") +-------------------------+ +# | | Ghostscript at work.... | +# V | | +# SOMETHING-DEVICE-SPECIFIC *-------------------------+ +# | | +# | | +# V | +# backend >------------------------------------+ +# | +# | +# V +# THE PRINTER +# +# NOTE: Gimp-Print and some other 3rd-Party-Filters (like TurboPrint) to +# CUPS and ESP PrintPro plug-in where rasterto<replaceable>something</replaceable> is noted. +# +######################################################################### +</programlisting> + +<programlisting> +######################################################################### +# +# And this is how it works for CUPS from 1.1.15: +# ============================================== +# +# <replaceable>SOMETHNG</replaceable>-FILEFORMAT +# | +# | +# V +# <replaceable>something</replaceable>tops +# | +# | +# V +# APPLICATION/POSTSCRIPT +# | +# | +# V +# pstops +# | +# | +# V +# APPLICATION/VND.CUPS-POSTSCRIPT-----+ +# | +# +------------------v------------------------------+ +# | Ghostscript | +# | at work... | +# | (with | +# | "-sDEVICE=cups") | +# | | +# | (= "postscipt interpreter") | +# | | +# +------------------v------------------------------+ +# | +# | +# APPLICATION/VND.CUPS-RASTER >-------+ +# | +# | +# V +# rasterto<replaceable>something</replaceable> +# | (= "raster driver") +# | +# V +# SOMETHING-DEVICE-SPECIFIC +# | +# | +# V +# backend +# +# +# NOTE: since version 1.1.15 CUPS "outsourced" the pstoraster process to +# Ghostscript. GNU Ghostscript needs to be patched to handle the +# CUPS requirement; ESP Ghostscript has this builtin. In any case, +# "gs -h" needs to show up a "cups" device. pstoraster is now a +# calling an appropriate "gs -sDEVICE=cups..." commandline to do +# the job. It will output "application/vnd.cup-raster", which will +# be finally processed by a CUPS raster driver "rasterto<replaceable>something</replaceable>" +# Note the difference to "cupsomatic", which will *not* output +# CUPS-raster, but a final version of the printfile, ready to be +# sent to the printer. cupsomatic also doesn't use the "cups" +# devicemode in Ghostscript, but one of the classical devicemodes.... +# +# NOTE: Gimp-Print and some other 3rd-Party-Filters (like TurboPrint) to +# CUPS and ESP PrintPro plug-in where rasterto<replaceable>something</replaceable> is noted. +# +######################################################################### +</programlisting> + +<programlisting> +######################################################################### +# +# And this is how it works for CUPS from 1.1.15, with cupsomatic included: +# ======================================================================== +# +# <replaceable>SOMETHNG</replaceable>-FILEFORMAT +# | +# | +# V +# <replaceable>something</replaceable>tops +# | +# | +# V +# APPLICATION/POSTSCRIPT +# | +# | +# V +# pstops +# | +# | +# V +# APPLICATION/VND.CUPS-POSTSCRIPT-----+ +# | +# +------------------v------------------------------+ +# | Ghostscript . Ghostscript at work.... | +# | at work... . (with "-sDEVICE= | +# | (with . <replaceable>s.th.</replaceable>" | +# | "-sDEVICE=cups") . | +# | . | +# | (CUPS standard) . (cupsomatic) | +# | . | +# | (= "postscript interpreter") | +# | . | +# +------------------v--------------v---------------+ +# | | +# | | +# APPLICATION/VND.CUPS-RASTER >-------+ | +# | | +# | | +# V | +# rasterto<replaceable>something</replaceable> | +# | (= "raster driver") | +# | | +# V | +# SOMETHING-DEVICE-SPECIFIC >------------------------+ +# | +# | +# V +# backend +# +# +# NOTE: Gimp-Print and some other 3rd-Party-Filters (like TurboPrint) to +# CUPS and ESP PrintPro plug-in where rasterto<replaceable>something</replaceable> is noted. +# +########################################################################## +</programlisting> + +</sect1> + + +<sect1> +<title>CUPS Print Drivers and Devices</title> + +<para> +CUPS ships with good support for HP LaserJet type printers. You can install +the driver as follows: + +<itemizedlist> + <listitem><para> + lpadmin -p laserjet4plus -v parallel:/dev/lp0 -E -m laserjet.ppd + </para></listitem> +</itemizedlist> + +(The "-m" switch will retrieve the "laserjet.ppd" from the standard repository +for not-yet-installed-PPDs, which CUPS typically stores in +<filename>/usr/share/cups/model</filename>. Alternatively, you may use +"-P /absolute/filesystem/path/to/where/there/is/PPD/your.ppd"). +</para> + +<sect2> +<title>Further printing steps</title> + +<para> +Always also consult the database on linuxprinting.org for all recommendations +about which driver is best used for each printer: +</para> + +<para><ulink url="http://www.linuxprinting.org/printer_list.cgi">http://www.linuxprinting.org/printer_list.cgi</ulink></para> + +<para> +There select your model and click on "Show". You'll arrive at a page listing +all drivers working with your model. There will always be *one* +<emphasis>recommended</emphasis> one. Try this one first. In your case +("HP LaserJet 4 Plus"), you'll arrive here: +</para> + +<para><ulink url="http://www.linuxprinting.org/show_printer.cgi?recnum=75104">http://www.linuxprinting.org/show_printer.cgi?recnum=75104</ulink></para> + +<para> +The recommended driver is "ljet4". It has a link to the page for the ljet4 +driver too: +</para> + +<para><ulink url="http://www.linuxprinting.org/show_driver.cgi?driver=ljet4">http://www.linuxprinting.org/show_driver.cgi?driver=ljet4</ulink> + +<para> +On the driver's page, you'll find important and detailed info about how to use +that driver within the various available spoolers. You can generate a PPD for +CUPS. The PPD contains all the info about how to use your model and the driver; +this is, once installed, working transparently for the user -- you'll only +need to choose resolution, paper size etc. from the web-based menu or from +the print dialog GUI or from the commandline... +</para> + +<para> +On the driver's page, choose to use the "PPD-O-Matic" online PPD generator +program. Select your model and click "Generate PPD file". When you safe the +appearing ASCII text file, don't use "cut'n'past" (as it could possiblly corrupt +line endings and tabs), but use "Save as..." in your browser's menu. Save it +at "/some/path/on/your/filesystem/somewhere/my-name-for-my-printer.ppd" +</para> + +<para> +Then install the printer: +</para> +<para><programlisting> + "lpadmin -p laserjet4plus -v parallel:/dev/lp0 -E -P /some/path/on/your/filesystem/somewhere/my-name-for-my-printer.ppd" +</programlisting></para> + +<para> +Note, that for all the "Foomatic-PPDs" from Linuxprinting.org, you also need +a special "CUPS filter" named "cupsomatic". Get the latest version of +"cupsomatic" from: +</para> + +<para><ulink url="http://www.linuxprinting.org/cupsomatic">http://www.linuxprinting.org/cupsomatic</ulink></para> + +<para> +This needs to be copied to <filename>/usr/lib/cups/filter/cupsomatic</filename> +and be made world executable. This filter is needed to read and act upon the +specially encoded Foomatic comments, embedded in the printfile, which in turn +are used to construct (transparently for you, the user) the complicated +ghostscript command line needed for your printer/driver combo. +</para> + +<para> +You can have a look at all the options for the Ghostscript commandline supported +by your printer and the ljet4 driver by going to the section "Execution details", +selecting your model (Laserjet 4 Plus) and clicking on "Show execution details". +This will bring up this web page: +</para> + +<para><ulink url="http://www.linuxprinting.org/execution.cgi?driver=ljet4&printer=75104&.submit=Show+execution+details">http://www.linuxprinting.org/execution.cgi?driver=ljet4&printer=75104&.submit=Show+execution+details</ulink></para> + +<para> +The ingenious thing is that the database is kept current. If there +is a bug fix and an improvement somewhere in the database, you will +always get the most current and stable and feature-rich driver by following +the steps described above. +</para> + +<note><para> +Till Kamppeter from MandrakeSoft is doing an excellent job here that too few +people are aware of. (So if you use it often, please send him a note showing +your appreciation).</para></note> + +<para> +The latest and greatest improvement now is support for "custom page sizes" +for all those printers which support it. +</para> + +<para> +"cupsomatic" is documented here: +</para> + +<para><ulink url="http://www.linuxprinting.org/cups-doc.html">http://www.linuxprinting.org/cups-doc.html</ulink></para> + +<para> +More printing tutorial info may be found here: +</para> + +<para><ulink url="http://www.linuxprinting.org/kpfeifle/LinuxKongress2002/Tutorial/">http://www.linuxprinting.org/kpfeifle/LinuxKongress2002/Tutorial/</ulink></para> + +<para> +Note, that *all* the Foomatic drivers listed on Linuxprinting.org (now +approaching the "all-time high" number of 1.000 for the supported models) +are using a special filtering chain involving Ghostscript, as described +in this document. +</para> + +<para> +Summary - You need: +</para> + +<para> +<simplelist> + + <member>A "foomatic+<replaceable>something</replaceable>" PPD is not enough to print with CUPS (but it is *one* important component)</member> + <member>The "cupsomatic" filter script (Perl) in <filename>/usr/lib/cups/filters/</filename></member> + <member>Perl to make cupsomatic run</member> + <member>Ghostscript (because it is called and controlled by the PPD/cupsomatic combo in a way to fit your printermodel/driver combo.</member> + <member>Ghostscript *must*, depending on the driver/model, contain support for a certain "device" (as shown by "gs -h")</member> +</simplelist> + +<para> +In the case of the "hpijs" driver, you need a Ghostscript version, which +has "ijs" amongst its supported devices in "gs -h". In the case of +"hpijs+foomatic", a valid ghostscript commandline would be reading like this: +</para> + +<para><programlisting> + gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs \ + -sIjsServer=hpijs<replaceable>PageSize</replaceable> -dDuplex=<replaceable>Duplex</replaceable> <replaceable>Model</replaceable> \ + -r<replaceable>Resolution</replaceable>,PS:MediaPosition=<replaceable>InputSlot</replaceable> -dIjsUseOutputFD \ + -sOutputFile=- - +</programlisting></para> + +<note><para> +Note, that with CUPS and the "hpijs+foomatic" PPD (plus Perl and cupsomatic) +you don't need to remember this. You can choose the available print options +thru a GUI print command (like "glp" from ESP's commercially supported +PrintPro software, or KDE's "kprinter", or GNOME's "gtklp" or the independent +"xpp") or the CUPS web interface via human-readable drop-down selection +menus. +</para></note> + +<para> +If you use "ESP Ghostscript" (also under the GPL, provided by Easy Software +Products, the makers of CUPS, downloadable from +<ulink url="http://www.cups.org/software.html">http://www.cups.org/software.html</ulink>, +co-maintained by the developers of linuxprinting.org), you are guaranteed to +have in use the most uptodate, bug-fixed, enhanced and stable version of a Free +Ghostscript. It contains support for ~300 devices, whereas plain vanilla +GNU Ghostscript 7.05 only has ~200. +</para> + +<para> +If you print only one CUPS test page, from the web interface and when you try to +print a windows test page, it acts like the job was never sent: + +<simplelist> + <member>Can you print "standard" jobs from the CUPS machine?</member> + <member>Are the jobs from Windows visible in the Web interface on CUPS (http://localhost:631/)?</member> + <member><emphasis>Most important:</emphasis> What kind of printer driver are you using on the Windows clients?</member> +</simplelist> + +You can try to get a more detailed debugging info by setting "LogLevel debug" in +<filename>/etc/cups/cupsd.conf</filename>, re-start cupsd and investigate <filename>/var/log/cups/error_log</filename> +for the whereabouts of your Windows-originating printjobs: +</para> + +<simplelist> + <member>what does the "auto-typing" line say? which is the "MIME type" CUPS thinks is arriving from the Windows clients?</member> + <member>are there "filter" available for this MIME type?</member> + <member>are there "filter rules" defined in "/etc/cups/mime.convs" for this MIME type?</member> +</simplelist> + +</sect1> + + +<sect1> +<title>Limiting the number of pages users can print</title> + +<para> +The feature you want is dependent on the real print subsystem you're using. +Samba's part is always to receive the job files from the clients (filtered +*or* unfiltered) and hand it over to this printing subsystem. +</para> + +<para> +Of course one could "hack" things with one's own scripts. +</para> + +<para> +But there is CUPS (Common Unix Printing System). CUPS supports "quotas". +Quotas can be based on sizes of jobs or on the number of pages or both, +and are spanning any time period you want. +</para> + +<para> +This is an example command how root would set a print quota in CUPS, +assuming an existing printer named "quotaprinter": +</para> + +<programlisting> + lpadmin -p quotaprinter -o job-quota-period=604800 -o job-k-limit=1024 -o job-page-limit=100 +</programlisting> + +<para> +This would limit every single user to print 100 pages or 1024 KB of +data (whichever comes first) within the last 604.800 seconds ( = 1 week). +</para> + +<para> +For CUPS to count correctly, the printfile needs to pass the CUPS "pstops" filter, +otherwise it uses a "dummy" count of "1". Some printfiles don't pass it +(eg: image files) but then those are mostly 1 page jobs anyway. This also means, +proprietary drivers for the target printer running on the client computers and +CUPS/Samba then spooling these files as "raw" (i.e. leaving them untouched, not +filtering them), will be counted as "1-pagers" too! +</para> + +<para> +You need to send PostScript from the clients (i.e. run a PostScript driver there) +for having the chance to get accounting done. If the printer is a non-PostScript model, +you need to let CUPS do the job to convert the file to a print-ready format for the +target printer. This will be working for currently ~1.000 different printer models, see +</para> + +<programlisting> + http://www.linuxprinting.org/printer_list.cgi +</programlisting> + +<para> +Before CUPS-1.1.16 your only option was to use the Adobe PostScript +Driver on the Windows clients. The output of this driver was not always +passed thru the "pstops" filter on the CUPS/Samba side, and therefor was +not counted correctly (the reason is that it often --- depending on the +"PPD" being used --- did write a "PJL"-header in front of the real +PostScript which made CUPS to skip the pstops and go directy to +the "pstoraster" stage). +</para> + +<para> +From CUPS-1.1.16 onward you can use the "CUPS PostScript Driver +for Windows NT/2K/XP clients" (it is tagged in the download area of +http://www.cups.org/ as the "cups-samba-1.1.16.tar.gz" package). +It is *not* working for Win9x/ME clients. But it: +</para> + +<simplelist> + <member>>it guarantees to not write an PJL-header</member> + <member>it guarantees to still read and support all PJL-options named in the driver PPD with its own means</member> + <member>it guarantees the file going thru the "pstops" filter on the CUPS/Samba server</member> + <member>it guarantees to page-count correctly the printfile</member> +</simplelist> + +<para> +You can read more about the setup of this combination in the +manpage for "cupsaddsmb" (only present with CUPS installed, only +current with CUPS 1.1.16). +</para> + +<para> +These are the items CUPS logs in the "page_log" for every single *page* of a job: +</para> + +<para><programlisting> + * Printer name + * User name + * Job ID + * Time of printing + * the page number + * the number of copies + * a billing info string (optional) +</programlisting></para> + +<para> +Here is an extract of my CUPS server's page_log file to illustrate +the format and included items: +</para> + +<para><programlisting> + infotec_IS2027 kurt 40 [22/Nov/2002:13:18:03 +0100] 1 2 #marketing + infotec_IS2027 kurt 40 [22/Nov/2002:13:18:03 +0100] 2 2 #marketing + infotec_IS2027 kurt 40 [22/Nov/2002:13:18:03 +0100] 3 2 #marketing + infotec_IS2027 kurt 40 [22/Nov/2002:13:18:03 +0100] 4 2 #marketing + infotec_IS2027 kurt 40 [22/Nov/2002:13:18:03 +0100] 5 2 #marketing + infotec_IS2027 kurt 40 [22/Nov/2002:13:18:03 +0100] 6 2 #marketing +</programlisting></para> + +<para> +This was Job ID "40", printed on "infotec_IS2027" by user "kurt", a 6-page job +printed in 2 copies and billed to "#marketing"... +</para> + +<para> +What flaws or shortcomings are there? +</para> + +<simplelist> + <member>the ones named above</member> + + <member> + CUPS really counts the job pages being *processsed in software* + (going thru the "RIP") rather than the physical sheets successfully + leaving the printing device -- if there is a jam while printing + the 5th sheet out of 1000 and the job is aborted by the printer, + the "page count" will still show the figure of 1000 for that job + </member> + + <member> + all quotas are the same for all users (no flexibility to give the + boss a higher quota than the clerk) no support for groups + </member> + + <member> + no means to read out the current balance or "used-up" number of current quota + </member> + + <member> + a user having used up 99 sheets of 100 quota will still be able to send and print a 1.000 sheet job + </member> + + <member> + a user being denied a job because of a filled-up quota doesn't get a meaningful + error message from CUPS other than "client-error-not-possible". + </member> +</simplelist> + +<para> +But this is the best system out there currently. And there are +huge improvements under development: +</para> + +<simplelist> + <member>page counting will go into the "backends" (these talk + directly to the printer and will increase the count in sync with the + actual printing process -- a jam at the 5th sheet will lead to a stop in the counting)</member> + + <member>quotas will be handled more flexibly</member> + + <member>probably there will be support for users to inquire their "accounts" in advance</member> + + <member>probably there will be support for some other tools around this topic</member> +</simplelist> + +<para> +Other than the current stage of the CUPS development, I don't +know any other ready-to-use tool which you could consider. +</para> + +<para> +You can download the driver files from +<ulink url="http://www.cups.org/software.html">http://www.cups.org/software.html</ulink>. +It is a separate package from the CUPS base software files, tagged as "CUPS 1.1.16 +Windows NT/2k/XP Printer Driver for SAMBA (tar.gz, 192k)". The filename to +download is "cups-samba-1.1.16.tar.gz". Upon untar-/unzip-ping it will reveal +the files: +</para> + +<para> +<programlisting> + cups-samba.install + cups-samba.license + cups-samba.readme + cups-samba.remove + cups-samba.ss +</programlisting> +</para> + +<para> +These have been packaged with the ESP meta packager software "EPM". The +*.install and *.remove files are simple shell script, which untars the +*.ss (which is nothing else than a tar-archive) and puts its contents +into <filename>/usr/share/cups/drivers/</filename>. Its contents are 3 files: +</para> + +<para> +<programlisting> + cupsdrvr.dll + cupsui.dll + cups.hlp +</programlisting> +</para> + +<note><para> +ATTENTION: due to a bug one CUPS release puts the <filename>cups.hlp</filename> +into <filename>/usr/share/drivers/</filename> instead of +<filename>/usr/share/cups/drivers/</filename>. To work around this, copy/move +the file after running the "./cups-samba.install" script manually to the right place: +</para> + +<para> +<programlisting> + cp /usr/share/drivers/cups.hlp /usr/share/cups/drivers/ +</programlisting> +</para> +</note> + +<note> +<para> +This new CUPS PostScript driver is currently binary-only, but free +no source code is provided (yet). The reason is this: it has +been developed with the help of the Microsoft Driver Developer Kit (DDK) +and compiled with Microsoft Visual Studio 6. It is not clear to the driver +developers if they are allowed to distribute the whole of the source code +as Free Software. However, they will likely release the "diff" in source +code under the GPL, so anybody with a license of Visual Studio and a DDK +will be able to compile for him/herself. +</para> + +<para> +Once you have run the install script (and possibly manually moved the +"cups.hlp" file to "/usr/share/cups/drivers/"), the driver is ready to be +put into Samba's [print$] share (which often maps to "/etc/samba/drivers/" +and contains a subdir tree with WIN40 and W32X86 branches), by running +"cupsaddsmb" (see also "man cupsaddsmb" for CUPS 1.1.16). [Don't forget to +put root into the smbpasswd file by running "smbpasswd" should you run +this whole procedure for the first time.] Once the driver files are in the +[print$] share, they are ready to be downloaded and installed by the +Win NT/2k/XP clients. +</para></note> + + +<note><para> +NOTE 1: Win 9x/ME clients won't work with this driver. For these you'd +still need to use the ADOBE*.* drivers as previously. +</para></note> + +<note><para> +NOTE 2: It is not harming if you've still the ADOBE*.* driver files from +previous installations in the "/usr/share/cups/drivers/" directory. +The new cupsaddsmb (from 1.1.16) will automatically use the +"newest" installed driver (which here then is the CUPS drivers). +</para></note> + +<note><para> +NOTE 3: Should your Win clients have had the old ADOBE*.* files and the +Adobe PostScript drivers installed, the download and installation +of the new CUPS PostScript driver for Windows NT/2k/XP will fail +at first. +</para> +<para> +It is not enough to "delete" the printer (as the driver files +will still be kept by the clients and re-used if you try to +re-install the printer). To really get rid of the Adobe driver +files on the clients, open the "Printers" folder (possibly via +"Start --> Settings --> Control Panel --> Printers"), right-click +onto the folder background and select "Server Properties". A +new dialog opens; select the "Drivers" tab; on the list select +the driver you want to delete and click on the "Delete" button. +(This will only work if there is no single printer left which +uses that particular driver -- you need to "delete" all printers +using this driver in the "Printers" folder first.) +</para> +</note> + +<note><para> +Once you have successfully downloaded the CUPS PostScript driver +to a client, you can easily switch all printers to this one +by proceeding as described elsewhere in the "Samba HOWTO +Collection" to change a driver for an existing printer. +</para></note> + +<para> +What are the benefits with the "CUPS PostScript driver for Windows NT/2k/XP" +as compared to the Adobe drivers? +</para> + +<para> +<itemizedlist> + <listitem><para> + no hassle with the Adobe EULA + </para></listitem> + + <listitem><para> + no hassle with the question "where do I get the ADOBE*.* driver files from?" + </para></listitem> + + <listitem><para> + the Adobe drivers (depending on the printer PPD associated with them) + often put a PJL header in front of the core PostScript part of the print + file (thus the file starts with "<replaceable>1B</replaceable>%-12345X" or "<replaceable>escape</replaceable>%-12345X" + instead of "%!PS"). This leads to the CUPS daemon autotyping the + arriving file as a print-ready file, not requiring a pass thru the + "pstops" filter (to speak more technical, it is not regarded as the + generic MIME type "application/postscript", but as the more special + MIME type "application/cups.vnd-postscript"), which therefore also + leads to the page accounting in "/var/log/cups/page_log" not receiving + the exact mumber of pages; instead the dummy page number of "1" is + logged in a standard setup) + </para></listitem> + + <listitem><para> + the Adobe driver has more options to "mis-configure" the PostScript + generated by it (like setting it inadvertedly to "Optimize for Speed", + instead of "Optimize for Portability", which could lead to CUPS being + unable to process it) + </para></listitem> + + <listitem><para> + the CUPS PostScript driver output sent by Windows clients to the CUPS + server will be guaranteed to be auto-typed as generic MIME type + "application/postscript", thusly passing thru the CUPS "pstops" filter + and logging the correct number of pages in the page_log for accounting + and quota purposes + </para></listitem> + + <listitem><para> + the CUPS PostScript driver supports the sending of additional print + options by the Win NT/2k/XP clients, such as naming the CUPS standard + banner pages (or the custom ones, should they be installed at the time + of driver download), using the CUPS "page-label" option, setting a + job-priority and setting the scheduled time of printing (with the option + to support additional useful IPP job attributes in the future). + </para></listitem> + + <listitem><para> + the CUPS PostScript driver supports the inclusion of the new + "*cupsJobTicket" comments at the beginnig of the PostScript file (which + could be used in the future for all sort of beneficial extensions on + the CUPS side, but which will not disturb any other application as those + will regard it as a comment and simply ignore it). + </para></listitem> + + <listitem><para> + the CUPS PostScript driver will be the heart of the fully fledged CUPS + IPP client for Windows NT/2k/XP to be released soon (probably alongside + the first Beta release for CUPS 1.2). + </para></listitem> + +</itemizedlist> +</para> +</sect1> + +<sect1> +<title>Advanced Postscript Printing from MS Windows</title> + +<para> +Let the Windows Clients use a PostScript driver to deliver poistscript to +the samba print server (just like any Linux or Unix Client would also use +PostScript to send to the server) +</para> + +<para> +Make the Unix printing subsystem to which Samba sends the job convert the +incoming PostScript files to the native print format of the target printers +(would be PCL if you have an HP printer) +</para> + +<para> +Now if you are afraid that this would just mean using a *Generic* PostScript +driver for the clients that has no Simplex/Duplex selection, and no paper tray +choice, but you need them to be able to set up print jobs, with all the bells +and whistles of your printers:- +</para> + +<simplelist> + <member>Not possible with traditional spooling systems</member> + + <member> + But perfectly supported by CUPS (which uses "PPD" files to + describe how to control the print options for PostScript and + non-PostScript devices alike... + </member> +</simplelist> + +<para> +CUPS PPDs are working perfectly on Windows clients who use Adobe PostScript +drivers (or the new CUPS PostScript driver for Windows NT/2K/XP). Clients can use +them to setup the job to their liking and CUPS will use the received job options +to make the (PCL-, ESC/P- or PostScript-) printer behave as required. +</para> + +<para> +If you want to have the additional benefit of page count logging and accounting +then the CUPS PostScript driver is the best choice (better than the Adobe one). +</para> + +<para> +If you want to make the drivers downloadable for the clients then "cupsaddsmb" is +your friend. It will setup the [print$] share on the Samba host to be ready to serve +the clients for a "point and print" driver installation. +</para> + +<warning> +<para>What strings are attached?</para></warning> + +<para> +There are some. But, given the sheer CPU power you can buy nowadays, +these can be overcome easily. The strings: +</para> + +<para> +Well, if the CUPS/Samba side will have to print to many printers serving many users, +you probably will need to set up a second server (which can do automatic load balancing +with the first one, plus a degree of fail-over mechanism). Converting the incoming +PostScript jobs, "interpreting" them for non-PostScript printers, amounts to the work +of a "RIP" (Raster Image Processor) done in software. This requires more CPU and RAM +than for the mere "raw spooling" task your current setup is solving. It all depends +on the avarage and peak printing load the server should be able to handle. +</para> + +</sect1> + +<sect1> +<title>Auto-Deletion of CUPS spool files</title> + +<para> +Samba print files pass thru two "spool" directories. One the incoming directory +managed by Samba, (set eg: in the "path = /var/spool/samba" directive in the [printers] +section of "smb.conf"). Second is the spool directory of your UNIX print subsystem. +For CUPS it is normally "/var/spool/cups/", as set by the cupsd.conf directive +"RequestRoot /var/spool/cups". +</para> + +<para> +I am not sure, which one of your directories keeps the files. From what you say, +it is most likely the Samba part. +</para> + +<para> +For the CUPS part, you may want to consult: +</para> + +<programlisting> + http://localhost:631/sam.html#PreserveJobFiles and + http://localhost:631/sam.html#PreserveJobHistory and + http://localhost:631/sam.html#MaxJobs +</programlisting> + +<para> +There are the settings described for your CUPS daemon, which could lead to completed +job files not being deleted. +</para> + +<para> +"PreserveJobHistory Yes" -- keeps some details of jobs in +cupsd's mind (well it keeps the "c12345", "c12346" etc. files +in the CUPS spool directory, which do a similar job as the +old-fashioned BSD-LPD control files). This is set to "Yes" +as a default. +</para> + +<para> +"PreserveJobFiles Yes" -- keeps the job files themselves in +cupsd's mind (well it keeps the "d12345", "d12346" etc. files +in the CUPS spool directory...). This is set to "No" as the +CUPS default. +</para> + +<para> +"MaxJobs 500" -- this directive controls the maximum number +of jobs that are kept in memory. Once the number of jobs +reaches the limit, the oldest completed job is automatically +purged from the system to make room for the new one. If all +of the known jobs are still pending or active then the new +job will be rejected. Setting the maximum to 0 disables this +functionality. The default setting is 0. +</para> + +<para> +(There are also additional settings for "MaxJobsPerUser" and +"MaxJobsPerPrinter"...) +</para> + +<para> +For everything to work as announced, you need to have three things: +</para> + +<simplelist> + + <member> + a Samba-smbd which is compiled against "libcups" (Check on Linux by running "ldd `which smbd`") + </member> + + <member> + a Samba-smb.conf setting of "printing = cups" + </member> + + <member> + another Samba-smb.conf setting of "printcap = cups" + </member> + +</simplelist> + +<note><para> +Note, that in this case all other manually set printing-related +commands (like "print command", "lpq command", "lprm command", +"lppause command" or "lpresume command") are ignored and they +should normally have no influence what-so-ever on your printing. +</para></note> + +<para> +If you want to do things manually, replace the "printing = cups" +by "printing = bsd". Then your manually set commands may work +(haven't tested this), and a "print command = lp -d %P %s; rm %s" +may do what you need. +</para> + +<para> +You forgot to mention the CUPS version you're using. If you did +set things up as described in the man pages, then the Samba +spool files should be deleted. Otherwise it may be a bug. On +the CUPS side, you can control the behaviour as described +above. +</para> + +<para> +If you have more problems, post the output of these commands: +</para> + +<para> +<programlisting> + grep -v ^# /etc/cups/cupsd.conf | grep -v ^$ + grep -v ^# /etc/samba/smb.conf | grep -v ^$ | grep -v "^;" +</programlisting> +</para> + +<para> +(adapt paths as needed). These commands sanitize the files +and cut out the empty lines and lines with comments, providing +the "naked settings" in a compact way. +</para> +</sect1> +</chapter> diff --git a/docs/docbook/projdoc/ServerType.sgml b/docs/docbook/projdoc/ServerType.sgml new file mode 100644 index 0000000000..41b1c0ed2f --- /dev/null +++ b/docs/docbook/projdoc/ServerType.sgml @@ -0,0 +1,141 @@ +<chapter id="ServerType"> +<chapterinfo> + <author> + <firstname>John H</firstname><surname>Terpstra</surname> + <affiliation> + <orgname>Samba Team</orgname> + <address><email>jht@samba.org</email></address> + </affiliation> + </author> +</chapterinfo> + +<title>Nomenclature of Server Types</title> + +<para>Adminstrators of Microsoft networks often refer to there being three +different type of servers:</para> + +<itemizedlist> + <listitem><para>Stand Alone Server</para></listitem> + <listitem><para>Domain Member Server</para></listitem> + <listitem><para>Domain Controller</para> + <itemizedlist> + <listitem><para>Primary Domain Controller</para></listitem> + <listitem><para>Backup Domain Controller</para></listitem> + <listitem><para>ADS Domain Controller</para></listitem> + </itemizedlist> + </listitem> +</itemizedlist> + +<para>A network administrator who is familiar with these terms and who +wishes to migrate to or use Samba will want to know what these terms mean +within a Samba context.</para> + +<sect1> +<title>Stand Alone Server</title> + +<para> +The term <emphasis>stand alone server</emphasis> means that the server +will provide local authentication and access control for all resources +that are available from it. In general this means that there will be a +local user database. In more technical terms, it means that resources +on the machine will either be made available in either SHARE mode or in +USER mode. SHARE mode and USER mode security are documented under +discussions regarding "security mode". The smb.conf configuration parameters +that control security mode are: "security = user" and "security = share". +</para> + +<para> +Samba tends to blur the distinction a little in respect of what is +a stand alone server. This is because the authentication database may be +local or on a remote server, even if from the samba protocol perspective +the samba server is NOT a member of a domain security context. +</para> + +<para> +Through the use of PAM (Pluggable Authentication Modules) and nsswitch +(the name service switcher) the source of authentication may reside on +another server. We would be inclined to call this the authentication server. +This means that the samba server may use the local Unix/Linux system +password database (/etc/passwd or /etc/shadow), may use a local smbpasswd +file (/etc/samba/smbpasswd or /usr/local/samba/lib/private/smbpasswd), or +may use an LDAP back end, or even via PAM and Winbind another CIFS/SMB +server for authentication. +</para> + +</sect1> + +<sect1> +<title>Domain Member Server</title> + +<para> +This mode of server operation involves the samba machine being made a member +of a domain security context. This means by definition that all user authentication +will be done from a centrally defined authentication regime. The authentication +regime may come from an NT3/4 style (old domain technology) server, or it may be +provided from an Active Directory server (ADS) running on MS Windows 2000 or later. +>/para> + +<para><emphasis> +Of course it should be clear that the authentication back end itself could be from any +distributed directory architecture server that is supported by Samba. This can be +LDAP (from OpenLDAP), or Sun's iPlanet, of NetWare Directory Server, etc. +</emphasis></para> + +<para> +Please refer to the section on Howto configure Samba as a Primary Domain Controller +and for more information regarding how to create a domain machine account for a +domain member server as well as for information regading how to enable the samba +domain member machine to join the domain and to be fully trusted by it. +</para> + +</sect1> + +<sect1> +<title>Domain Controller</title> + +<para> +Over the years public perceptions of what Domain Control really is has taken on an +almost mystical nature. Before we branch into a brief overview of what Domain Control +is the following types of controller are known: +</para> + +<sect2> +<title>Domain Controller Types</title> + +<simplelist> + <member>Primary Domain Controller</member> + <member>Backup Domain Controller</member> + <member>ADS Domain Controller</member> +</simplelist> + +<para> +The <emphasis>Primary Domain Controller</emphasis> or PDC plays an important role in the MS +Windows NT3 and NT4 Domain Control architecture, but not in the manner that so many +expect. The PDC seeds the Domain Control database (a part of the Windows registry) and +it plays a key part in synchronisation of the domain authentication database. +</para> + +<para> +New to Samba-3.0.0 is the ability to use a back-end file that holds the same type of data as +the NT4 style SAM (Security Account Manager) database (one of the registry files). +The samba-3.0.0 SAM can be specified via the smb.conf file parameter "passwd backend" and +valid options include <emphasis> smbpasswd tdbsam ldapsam nisplussam plugin unixsam</emphasis>. +The smbpasswd, tdbsam and ldapsam options can have a "_nua" suffix to indicate that No Unix +Accounts need to be created. In other words, the Samba SAM will be independant of Unix/Linux +system accounts, provided a uid range is defined from which SAM accounts can be created. +</para> + +<para> +The <emphasis>Backup Domain Controller</emphasis> or BDC plays a key role in servicing network +authentication requests. The BDC is biased to answer logon requests so that on a network segment +that has a BDC and a PDC the BDC will be most likely to service network logon requests. The PDC will +answer network logon requests when the BDC is too busy (high load). A BDC can be promoted to +a PDC. If the PDC is on line at the time that the BDC is promoted to PDC the previous PDC is +automatically demoted to a BDC. +</para> + +<para> +At this time Samba is NOT capable of acting as an <emphasis>ADS Domain Controller</emphasis>. + +</sect2> +</sect1> diff --git a/docs/docbook/projdoc/passdb.sgml b/docs/docbook/projdoc/passdb.sgml new file mode 100644 index 0000000000..fa2d75bd34 --- /dev/null +++ b/docs/docbook/projdoc/passdb.sgml @@ -0,0 +1,1012 @@ +<chapter id="passdb"> +<chapterinfo> + <author> + <firstname>Jelmer</firstname><surname>Vernooij</surname> + <affiliation> + <orgname>The Samba Team</orgname> + <address><email>jelmer@samba.org</email></address> + </affiliation> + </author> + <author> + <firstname>Gerald (Jerry)</firstname><surname>Carter</surname> + <affiliation> + <orgname>Samba Team</orgname> + <address><email>jerry@samba.org</email></address> + </affiliation> + </author> + <author> + <firstname>Olivier (lem)</firstname><surname>Lemaire</surname> + <affiliation> + <orgname>IDEALX</orgname> + <address><email>olem@IDEALX.org</email></address> + </affiliation> + </author> + <author> + <firstname>Jeremy</firstname><surname>Allison</surname> + <affiliation> + <orgname>Samba Team</orgname> + <address> + <email>jra@samba.org</email> + </address> + </affiliation> + </author> + <author> + <firstname>John H</firstname><surname>Terpstra</surname> + <affiliation> + <orgname>Samba Team</orgname> + <address> + <email>jht@samba.org</email> + </address> + </affiliation> + </author> + + <pubdate>February 2003</pubdate> +</chapterinfo> + +<title>User information database</title> + +<sect1> + <title>Introduction</title> + + <para>Old windows clients send plain text passwords over the wire. + Samba can check these passwords by crypting them and comparing them + to the hash stored in the unix user database. + </para> + + <para> + Newer windows clients send encrypted passwords (so-called + Lanman and NT hashes) over + the wire, instead of plain text passwords. The newest clients + will only send encrypted passwords and refuse to send plain text + passwords, unless their registry is tweaked. + </para> + + <para>These passwords can't be converted to unix style encrypted + passwords. Because of that you can't use the standard unix + user database, and you have to store the Lanman and NT hashes + somewhere else. </para> + + <para>Next to a differently encrypted passwords, + windows also stores certain data for each user + that is not stored in a unix user database, e.g. + workstations the user may logon from, the location where his/her + profile is stored, etc. + Samba retrieves and stores this information using a "passdb backend". + Commonly + available backends are LDAP, plain text file, MySQL and nisplus. + For more information, see the documentation about the + <command>passdb backend = </command> parameter. + </para> +</sect1> + +<sect1> + <title>Important Notes About Security</title> + + <para>The unix and SMB password encryption techniques seem similar + on the surface. This similarity is, however, only skin deep. The unix + scheme typically sends clear text passwords over the network when + logging in. This is bad. The SMB encryption scheme never sends the + cleartext password over the network but it does store the 16 byte + hashed values on disk. This is also bad. Why? Because the 16 byte hashed + values are a "password equivalent". You cannot derive the user's + password from them, but they could potentially be used in a modified + client to gain access to a server. This would require considerable + technical knowledge on behalf of the attacker but is perfectly possible. + You should thus treat the data stored in whatever + passdb backend you use (smbpasswd file, ldap, mysql) as though it contained the + cleartext passwords of all your users. Its contents must be kept + secret, and the file should be protected accordingly.</para> + + <para>Ideally we would like a password scheme which neither requires + plain text passwords on the net or on disk. Unfortunately this + is not available as Samba is stuck with being compatible with + other SMB systems (WinNT, WfWg, Win95 etc). </para> + + <warning> + <para>Note that Windows NT 4.0 Service pack 3 changed the + default for permissible authentication so that plaintext + passwords are <emphasis>never</emphasis> sent over the wire. + The solution to this is either to switch to encrypted passwords + with Samba or edit the Windows NT registry to re-enable plaintext + passwords. See the document WinNT.txt for details on how to do + this.</para> + + <para>Other Microsoft operating systems which also exhibit + this behavior includes</para> + + <para> These versions of MS Windows do not support full domain + security protocols, although they may log onto a domain environment. + Of these Only MS Windows XP Home does NOT support domain logons.</para> + + <simplelist> + <member>MS DOS Network client 3.0 with + the basic network redirector installed</member> + + <member>Windows 95 with the network redirector + update installed</member> + + <member>Windows 98 [se]</member> + + <member>Windows Me</member> + + <member>Windows XP Home</member> + </simplelist> + + <para> The following versions of MS Windows fully support domain + security protocols.</para> + + <simplelist> + <member>Windows NT 3.5x</member> + + <member>Windows NT 4.0</member> + + <member>Windows 2000 Professional</member> + + <member>Windows 200x Server/Advanced Server</member> + + <member>Windows XP Professional</member> + </simplelist> + + <para><emphasis>Note :</emphasis>All current release of + Microsoft SMB/CIFS clients support authentication via the + SMB Challenge/Response mechanism described here. Enabling + clear text authentication does not disable the ability + of the client to participate in encrypted authentication.</para> + + + <para>MS Windows clients will cache the encrypted password alone. + Even when plain text passwords are re-enabled, through the appropriate + registry change, the plain text password is NEVER cached. This means that + in the event that a network connections should become disconnected (broken) + only the cached (encrypted) password will be sent to the resource server + to affect a auto-reconnect. If the resource server does not support encrypted + passwords the auto-reconnect will fail. <emphasis>USE OF ENCRYPTED PASSWORDS + IS STRONGLY ADVISED.</emphasis></para> + </warning> + + <sect2> + <title>Advantages of SMB Encryption</title> + + <simplelist> + <member>Plain text passwords are not passed across + the network. Someone using a network sniffer cannot just + record passwords going to the SMB server.</member> + + <member>WinNT doesn't like talking to a server + that SM not support encrypted passwords. It will refuse + to browse the server if the server is also in user level + security mode. It will insist on prompting the user for the + password on each connection, which is very annoying. The + only things you can do to stop this is to use SMB encryption. + </member> + + <member>Encrypted password support allows auto-matic share + (resource) reconnects.</member> + </simplelist> + </sect2> + + + <sect2> + <title>Advantages of non-encrypted passwords</title> + + <simplelist> + <member>Plain text passwords are not kept + on disk, and are NOT cached in memory. </member> + + <member>Uses same password file as other unix + services such as login and ftp</member> + + <member>Use of other services (such as telnet and ftp) which + send plain text passwords over the net, so sending them for SMB + isn't such a big deal.</member> + </simplelist> + </sect2> +</sect1> + + +<sect1> + <title>The smbpasswd Command</title> + + <para>The smbpasswd utility is a utility similar to the + <command>passwd</command> or <command>yppasswd</command> programs. + It maintains the two 32 byte password fields in the passdb backend. </para> + + <para><command>smbpasswd</command> works in a client-server mode + where it contacts the local smbd to change the user's password on its + behalf. This has enormous benefits - as follows.</para> + + <para><command>smbpasswd</command> has the capability + to change passwords on Windows NT servers (this only works when + the request is sent to the NT Primary Domain Controller if you + are changing an NT Domain user's password).</para> + + <para>To run smbpasswd as a normal user just type :</para> + + <para><prompt>$ </prompt><userinput>smbpasswd</userinput></para> + <para><prompt>Old SMB password: </prompt><userinput><type old value here - + or hit return if there was no old password></userinput></para> + <para><prompt>New SMB Password: </prompt><userinput><type new value> + </userinput></para> + <para><prompt>Repeat New SMB Password: </prompt><userinput><re-type new value + </userinput></para> + + <para>If the old value does not match the current value stored for + that user, or the two new values do not match each other, then the + password will not be changed.</para> + + <para>If invoked by an ordinary user it will only allow the user + to change his or her own Samba password.</para> + + <para>If run by the root user smbpasswd may take an optional + argument, specifying the user name whose SMB password you wish to + change. Note that when run as root smbpasswd does not prompt for + or check the old password value, thus allowing root to set passwords + for users who have forgotten their passwords.</para> + + <para><command>smbpasswd</command> is designed to work in the same way + and be familiar to UNIX users who use the <command>passwd</command> or + <command>yppasswd</command> commands.</para> + + <para>For more details on using <command>smbpasswd</command> refer + to the man page which will always be the definitive reference.</para> +</sect1> + +<!-- +<sect1> +<title>The <command>pdbedit</command> command</title> +FIXME +</sect1> +--> + +<sect1> +<title>Plain text</title> +<para> +Older versions of samba retrieved user information from the unix user database +and eventually some other fields from the file <filename>/etc/samba/smbpasswd</filename> +or <filename>/etc/smbpasswd</filename>. When password encryption is disabled, no +data is stored at all. +</para> +</sect1> + +<sect1> +<title>TDB</title> +<para>Samba can also store the user data in a "TDB" (Trivial Database). Using this backend +doesn't require any additional configuration. This backend is recommended for new installations who +don't require LDAP. +</para> +</sect1> + +<sect1> +<title>LDAP</title> + +<sect2> +<title>Introduction</title> + +<para> +This document describes how to use an LDAP directory for storing Samba user +account information traditionally stored in the smbpasswd(5) file. It is +assumed that the reader already has a basic understanding of LDAP concepts +and has a working directory server already installed. For more information +on LDAP architectures and Directories, please refer to the following sites. +</para> + +<itemizedlist> + <listitem><para>OpenLDAP - <ulink url="http://www.openldap.org/">http://www.openldap.org/</ulink></para></listitem> + <listitem><para>iPlanet Directory Server - <ulink url="http://iplanet.netscape.com/directory">http://iplanet.netscape.com/directory</ulink></para></listitem> +</itemizedlist> + +<para> +Note that <ulink url="http://www.ora.com/">O'Reilly Publishing</ulink> is working on +a guide to LDAP for System Administrators which has a planned release date of +early summer, 2002. +</para> + +<para> +Two additional Samba resources which may prove to be helpful are +</para> + +<itemizedlist> + <listitem><para>The <ulink url="http://www.unav.es/cti/ldap-smb/ldap-smb-3-howto.html">Samba-PDC-LDAP-HOWTO</ulink> + maintained by Ignacio Coupeau.</para></listitem> + + <listitem><para>The NT migration scripts from <ulink url="http://samba.idealx.org/">IDEALX</ulink> that are + geared to manage users and group in such a Samba-LDAP Domain Controller configuration. + </para></listitem> +</itemizedlist> + +</sect2> + +<sect2> +<title>Introduction</title> + +<para> +Traditionally, when configuring <ulink url="smb.conf.5.html#ENCRYPTPASSWORDS">"encrypt +passwords = yes"</ulink> in Samba's <filename>smb.conf</filename> file, user account +information such as username, LM/NT password hashes, password change times, and account +flags have been stored in the <filename>smbpasswd(5)</filename> file. There are several +disadvantages to this approach for sites with very large numbers of users (counted +in the thousands). +</para> + +<itemizedlist> +<listitem><para> +The first is that all lookups must be performed sequentially. Given that +there are approximately two lookups per domain logon (one for a normal +session connection such as when mapping a network drive or printer), this +is a performance bottleneck for lareg sites. What is needed is an indexed approach +such as is used in databases. +</para></listitem> + +<listitem><para> +The second problem is that administrators who desired to replicate a +smbpasswd file to more than one Samba server were left to use external +tools such as <command>rsync(1)</command> and <command>ssh(1)</command> +and wrote custom, in-house scripts. +</para></listitem> + +<listitem><para> +And finally, the amount of information which is stored in an +smbpasswd entry leaves no room for additional attributes such as +a home directory, password expiration time, or even a Relative +Identified (RID). +</para></listitem> +</itemizedlist> + +<para> +As a result of these defeciencies, a more robust means of storing user attributes +used by smbd was developed. The API which defines access to user accounts +is commonly referred to as the samdb interface (previously this was called the passdb +API, and is still so named in the CVS trees). In Samba 2.2.3, enabling support +for a samdb backend (e.g. <parameter>--with-ldapsam</parameter> or +<parameter>--with-tdbsam</parameter>) requires compile time support. +</para> + +<para> +When compiling Samba to include the <parameter>--with-ldapsam</parameter> autoconf +option, smbd (and associated tools) will store and lookup user accounts in +an LDAP directory. In reality, this is very easy to understand. If you are +comfortable with using an smbpasswd file, simply replace "smbpasswd" with +"LDAP directory" in all the documentation. +</para> + +<para> +There are a few points to stress about what the <parameter>--with-ldapsam</parameter> +does not provide. The LDAP support referred to in the this documentation does not +include: +</para> + +<itemizedlist> + <listitem><para>A means of retrieving user account information from + an Windows 2000 Active Directory server.</para></listitem> + <listitem><para>A means of replacing /etc/passwd.</para></listitem> +</itemizedlist> + +<para> +The second item can be accomplished by using LDAP NSS and PAM modules. LGPL +versions of these libraries can be obtained from PADL Software +(<ulink url="http://www.padl.com/">http://www.padl.com/</ulink>). However, +the details of configuring these packages are beyond the scope of this document. +</para> + +</sect2> + +<sect2> +<title>Supported LDAP Servers</title> + +<para> +The LDAP samdb code in 2.2.3 (and later) has been developed and tested +using the OpenLDAP 2.0 server and client libraries. +The same code should be able to work with Netscape's Directory Server +and client SDK. However, due to lack of testing so far, there are bound +to be compile errors and bugs. These should not be hard to fix. +If you are so inclined, please be sure to forward all patches to +<ulink url="samba-patches@samba.org">samba-patches@samba.org</ulink> and +<ulink url="jerry@samba.org">jerry@samba.org</ulink>. +</para> + +</sect2> + +<sect2> +<title>Schema and Relationship to the RFC 2307 posixAccount</title> + + +<para> +Samba 3.0 includes the necessary schema file for OpenLDAP 2.0 in +<filename>examples/LDAP/samba.schema</filename>. The sambaAccount objectclass is given here: +</para> + +<para><programlisting> +objectclass ( 1.3.1.5.1.4.1.7165.2.2.2 NAME 'sambaAccount' SUP top STRUCTURAL + DESC 'Samba Account' + MUST ( uid $ rid ) + MAY ( cn $ lmPassword $ ntPassword $ pwdLastSet $ logonTime $ + logoffTime $ kickoffTime $ pwdCanChange $ pwdMustChange $ acctFlags $ + displayName $ smbHome $ homeDrive $ scriptPath $ profilePath $ + description $ userWorkstations $ primaryGroupID $ domain )) +</programlisting></para> + +<para> +The samba.schema file has been formatted for OpenLDAP 2.0. The OID's are +owned by the Samba Team and as such is legal to be openly published. +If you translate the schema to be used with Netscape DS, please +submit the modified schema file as a patch to <ulink +url="jerry@samba.org">jerry@samba.org</ulink> +</para> + +<para> +Just as the smbpasswd file is mean to store information which supplements a +user's <filename>/etc/passwd</filename> entry, so is the sambaAccount object +meant to supplement the UNIX user account information. A sambaAccount is a +<constant>STRUCTURAL</constant> objectclass so it can be stored individually +in the directory. However, there are several fields (e.g. uid) which overlap +with the posixAccount objectclass outlined in RFC2307. This is by design. +</para> + +<!--olem: we should perhaps have a note about shadowAccounts too as many +systems use them, isn'it ? --> + +<para> +In order to store all user account information (UNIX and Samba) in the directory, +it is necessary to use the sambaAccount and posixAccount objectclasses in +combination. However, smbd will still obtain the user's UNIX account +information via the standard C library calls (e.g. getpwnam(), et. al.). +This means that the Samba server must also have the LDAP NSS library installed +and functioning correctly. This division of information makes it possible to +store all Samba account information in LDAP, but still maintain UNIX account +information in NIS while the network is transitioning to a full LDAP infrastructure. +</para> +</sect2> + +<sect2> +<title>Configuring Samba with LDAP</title> + + +<sect3> +<title>OpenLDAP configuration</title> + +<para> +To include support for the sambaAccount object in an OpenLDAP directory +server, first copy the samba.schema file to slapd's configuration directory. +</para> + +<para> +<prompt>root# </prompt><command>cp samba.schema /etc/openldap/schema/</command> +</para> + +<para> +Next, include the <filename>samba.schema</filename> file in <filename>slapd.conf</filename>. +The sambaAccount object contains two attributes which depend upon other schema +files. The 'uid' attribute is defined in <filename>cosine.schema</filename> and +the 'displayName' attribute is defined in the <filename>inetorgperson.schema</filename> +file. Both of these must be included before the <filename>samba.schema</filename> file. +</para> + +<para><programlisting> +## /etc/openldap/slapd.conf + +## schema files (core.schema is required by default) +include /etc/openldap/schema/core.schema + +## needed for sambaAccount +include /etc/openldap/schema/cosine.schema +include /etc/openldap/schema/inetorgperson.schema +include /etc/openldap/schema/samba.schema + +## uncomment this line if you want to support the RFC2307 (NIS) schema +## include /etc/openldap/schema/nis.schema + +.... +</programlisting></para> + +<para> +It is recommended that you maintain some indices on some of the most usefull attributes, +like in the following example, to speed up searches made on sambaAccount objectclasses +(and possibly posixAccount and posixGroup as well). +</para> +<para><programlisting> +# Indices to maintain +## required by OpenLDAP 2.0 +index objectclass eq + +## support pb_getsampwnam() +index uid pres,eq +## support pdb_getsambapwrid() +index rid eq + +## uncomment these if you are storing posixAccount and +## posixGroup entries in the directory as well +##index uidNumber eq +##index gidNumber eq +##index cn eq +##index memberUid eq +</programlisting></para> +</sect3> + + +<sect3> +<title>Configuring Samba</title> +<!--lem: <title>smb.conf LDAP parameters</title> --> + +<para> +The following parameters are available in smb.conf only with <parameter>--with-ldapsam</parameter> +was included with compiling Samba. +</para> + +<itemizedlist> + <listitem><para><ulink url="smb.conf.5.html#LDAPSSL">ldap ssl</ulink></para></listitem> + <listitem><para><ulink url="smb.conf.5.html#LDAPSERVER">ldap server</ulink></para></listitem> + <listitem><para><ulink url="smb.conf.5.html#LDAPADMINDN">ldap admin dn</ulink></para></listitem> + <listitem><para><ulink url="smb.conf.5.html#LDAPSUFFIX">ldap suffix</ulink></para></listitem> + <listitem><para><ulink url="smb.conf.5.html#LDAPFILTER">ldap filter</ulink></para></listitem> + <listitem><para><ulink url="smb.conf.5.html#LDAPPORT">ldap port</ulink></para></listitem> +</itemizedlist> + +<para> +These are described in the <ulink url="smb.conf.5.html">smb.conf(5)</ulink> man +page and so will not be repeated here. However, a sample smb.conf file for +use with an LDAP directory could appear as +</para> + +<para><programlisting> +## /usr/local/samba/lib/smb.conf +[global] + security = user + encrypt passwords = yes + + netbios name = TASHTEGO + workgroup = NARNIA + + # ldap related parameters + + # define the DN to use when binding to the directory servers + # The password for this DN is not stored in smb.conf. Rather it + # must be set by using 'smbpasswd -w <replaceable>secretpw</replaceable>' to store the + # passphrase in the secrets.tdb file. If the "ldap admin dn" values + # changes, this password will need to be reset. + ldap admin dn = "cn=Samba Manager,ou=people,dc=samba,dc=org" + + # specify the LDAP server's hostname (defaults to locahost) + ldap server = ahab.samba.org + + # Define the SSL option when connecting to the directory + # ('off', 'start tls', or 'on' (default)) + ldap ssl = start tls + + # define the port to use in the LDAP session (defaults to 636 when + # "ldap ssl = on") + ldap port = 389 + + # specify the base DN to use when searching the directory + ldap suffix = "ou=people,dc=samba,dc=org" + + # generally the default ldap search filter is ok + # ldap filter = "(&(uid=%u)(objectclass=sambaAccount))" +</programlisting></para> + + +</sect3> +</sect2> + + +<sect2> +<title>Accounts and Groups management</title> + +<para> +As users accounts are managed thru the sambaAccount objectclass, you should +modify you existing administration tools to deal with sambaAccount attributes. +</para> + +<para> +Machines accounts are managed with the sambaAccount objectclass, just +like users accounts. However, it's up to you to stored thoses accounts +in a different tree of you LDAP namespace: you should use +"ou=Groups,dc=plainjoe,dc=org" to store groups and +"ou=People,dc=plainjoe,dc=org" to store users. Just configure your +NSS and PAM accordingly (usually, in the /etc/ldap.conf configuration +file). +</para> + +<para> +In Samba release 3.0, the group management system is based on posix +groups. This means that Samba make usage of the posixGroup objectclass. +For now, there is no NT-like group system management (global and local +groups). +</para> + +</sect2> + +<sect2> +<title>Security and sambaAccount</title> + + +<para> +There are two important points to remember when discussing the security +of sambaAccount entries in the directory. +</para> + +<itemizedlist> + <listitem><para><emphasis>Never</emphasis> retrieve the lmPassword or + ntPassword attribute values over an unencrypted LDAP session.</para></listitem> + <listitem><para><emphasis>Never</emphasis> allow non-admin users to + view the lmPassword or ntPassword attribute values.</para></listitem> +</itemizedlist> + +<para> +These password hashes are clear text equivalents and can be used to impersonate +the user without deriving the original clear text strings. For more information +on the details of LM/NT password hashes, refer to the <ulink +url="ENCRYPTION.html">ENCRYPTION chapter</ulink> of the Samba-HOWTO-Collection. +</para> + +<para> +To remedy the first security issue, the "ldap ssl" smb.conf parameter defaults +to require an encrypted session (<command>ldap ssl = on</command>) using +the default port of 636 +when contacting the directory server. When using an OpenLDAP 2.0 server, it +is possible to use the use the StartTLS LDAP extended operation in the place of +LDAPS. In either case, you are strongly discouraged to disable this security +(<command>ldap ssl = off</command>). +</para> + +<para> +Note that the LDAPS protocol is deprecated in favor of the LDAPv3 StartTLS +extended operation. However, the OpenLDAP library still provides support for +the older method of securing communication between clients and servers. +</para> + +<para> +The second security precaution is to prevent non-administrative users from +harvesting password hashes from the directory. This can be done using the +following ACL in <filename>slapd.conf</filename>: +</para> + +<para><programlisting> +## allow the "ldap admin dn" access, but deny everyone else +access to attrs=lmPassword,ntPassword + by dn="cn=Samba Admin,ou=people,dc=plainjoe,dc=org" write + by * none +</programlisting></para> + + +</sect2> + + + +<sect2> +<title>LDAP specials attributes for sambaAccounts</title> + +<para> +The sambaAccount objectclass is composed of the following attributes: +</para> + +<itemizedlist> + + <listitem><para><constant>lmPassword</constant>: the LANMAN password 16-byte hash stored as a character + representation of a hexidecimal string.</para></listitem> + + <listitem><para><constant>ntPassword</constant>: the NT password hash 16-byte stored as a character + representation of a hexidecimal string.</para></listitem> + + <listitem><para><constant>pwdLastSet</constant>: The integer time in seconds since 1970 when the + <constant>lmPassword</constant> and <constant>ntPassword</constant> attributes were last set. + </para></listitem> + + <listitem><para><constant>acctFlags</constant>: string of 11 characters surrounded by square brackets [] + representing account flags such as U (user), W(workstation), X(no password expiration), and + D(disabled).</para></listitem> + + <listitem><para><constant>logonTime</constant>: Integer value currently unused</para></listitem> + + <listitem><para><constant>logoffTime</constant>: Integer value currently unused</para></listitem> + + <listitem><para><constant>kickoffTime</constant>: Integer value currently unused</para></listitem> + + <listitem><para><constant>pwdCanChange</constant>: Integer value currently unused</para></listitem> + + <listitem><para><constant>pwdMustChange</constant>: Integer value currently unused</para></listitem> + + <listitem><para><constant>homeDrive</constant>: specifies the drive letter to which to map the + UNC path specified by homeDirectory. The drive letter must be specified in the form "X:" + where X is the letter of the drive to map. Refer to the "logon drive" parameter in the + smb.conf(5) man page for more information.</para></listitem> + + <listitem><para><constant>scriptPath</constant>: The scriptPath property specifies the path of + the user's logon script, .CMD, .EXE, or .BAT file. The string can be null. The path + is relative to the netlogon share. Refer to the "logon script" parameter in the + smb.conf(5) man page for more information.</para></listitem> + + <listitem><para><constant>profilePath</constant>: specifies a path to the user's profile. + This value can be a null string, a local absolute path, or a UNC path. Refer to the + "logon path" parameter in the smb.conf(5) man page for more information.</para></listitem> + + <listitem><para><constant>smbHome</constant>: The homeDirectory property specifies the path of + the home directory for the user. The string can be null. If homeDrive is set and specifies + a drive letter, homeDirectory should be a UNC path. The path must be a network + UNC path of the form \\server\share\directory. This value can be a null string. + Refer to the "logon home" parameter in the smb.conf(5) man page for more information. + </para></listitem> + + <listitem><para><constant>userWorkstation</constant>: character string value currently unused. + </para></listitem> + + <listitem><para><constant>rid</constant>: the integer representation of the user's relative identifier + (RID).</para></listitem> + + <listitem><para><constant>primaryGroupID</constant>: the relative identifier (RID) of the primary group + of the user.</para></listitem> + +</itemizedlist> + +<para> +The majority of these parameters are only used when Samba is acting as a PDC of +a domain (refer to the <ulink url="Samba-PDC-HOWTO.html">Samba-PDC-HOWTO</ulink> for details on +how to configure Samba as a Primary Domain Controller). The following four attributes +are only stored with the sambaAccount entry if the values are non-default values: +</para> + +<itemizedlist> + <listitem><para>smbHome</para></listitem> + <listitem><para>scriptPath</para></listitem> + <listitem><para>logonPath</para></listitem> + <listitem><para>homeDrive</para></listitem> +</itemizedlist> + +<para> +These attributes are only stored with the sambaAccount entry if +the values are non-default values. For example, assume TASHTEGO has now been +configured as a PDC and that <command>logon home = \\%L\%u</command> was defined in +its <filename>smb.conf</filename> file. When a user named "becky" logons to the domain, +the <parameter>logon home</parameter> string is expanded to \\TASHTEGO\becky. +If the smbHome attribute exists in the entry "uid=becky,ou=people,dc=samba,dc=org", +this value is used. However, if this attribute does not exist, then the value +of the <parameter>logon home</parameter> parameter is used in its place. Samba +will only write the attribute value to the directory entry is the value is +something other than the default (e.g. \\MOBY\becky). +</para> + + +</sect2> + + + +<sect2> +<title>Example LDIF Entries for a sambaAccount</title> + + +<para> +The following is a working LDIF with the inclusion of the posixAccount objectclass: +</para> + +<para><programlisting> +dn: uid=guest2, ou=people,dc=plainjoe,dc=org +ntPassword: 878D8014606CDA29677A44EFA1353FC7 +pwdMustChange: 2147483647 +primaryGroupID: 1201 +lmPassword: 552902031BEDE9EFAAD3B435B51404EE +pwdLastSet: 1010179124 +logonTime: 0 +objectClass: sambaAccount +uid: guest2 +kickoffTime: 2147483647 +acctFlags: [UX ] +logoffTime: 2147483647 +rid: 19006 +pwdCanChange: 0 +</programlisting></para> + +<para> +The following is an LDIF entry for using both the sambaAccount and +posixAccount objectclasses: +</para> + +<para><programlisting> +dn: uid=gcarter, ou=people,dc=plainjoe,dc=org +logonTime: 0 +displayName: Gerald Carter +lmPassword: 552902031BEDE9EFAAD3B435B51404EE +primaryGroupID: 1201 +objectClass: posixAccount +objectClass: sambaAccount +acctFlags: [UX ] +userPassword: {crypt}BpM2ej8Rkzogo +uid: gcarter +uidNumber: 9000 +cn: Gerald Carter +loginShell: /bin/bash +logoffTime: 2147483647 +gidNumber: 100 +kickoffTime: 2147483647 +pwdLastSet: 1010179230 +rid: 19000 +homeDirectory: /home/tashtego/gcarter +pwdCanChange: 0 +pwdMustChange: 2147483647 +ntPassword: 878D8014606CDA29677A44EFA1353FC7 +</programlisting></para> + +</sect2> +</sect1> + +<sect1> +<title>MySQL</title> + +<sect2> +<title>Building</title> + +<para>To build the plugin, run <command>make bin/pdb_mysql.so</command> +in the <filename>source/</filename> directory of samba distribution. +</para> + +<para>Next, copy pdb_mysql.so to any location you want. I +strongly recommend installing it in $PREFIX/lib or /usr/lib/samba/</para> + +</sect2> + +<sect2> +<title>Creating the database</title> + +<para> +You either can set up your own table and specify the field names to pdb_mysql (see below +for the column names) or use the default table. The file <filename>examples/pdb/mysql/mysql.dump</filename> +contains the correct queries to create the required tables. Use the command : + +<command>mysql -u<replaceable>username</replaceable> -h<replaceable>hostname</replaceable> -p<replaceable>password</replaceable> <replaceable>databasename</replaceable> < <filename>/path/to/samba/examples/pdb/mysql/mysql.dump</filename></command> + +</para> +</sect2> + +<sect2> +<title>Configuring</title> + +<para>This plugin lacks some good documentation, but here is some short info:</para> + +<para>Add a the following to the <command>passdb backend</command> variable in your <filename>smb.conf</filename>: +<programlisting> +passdb backend = [other-plugins] plugin:/location/to/pdb_mysql.so:identifier [other-plugins] +</programlisting> +</para> + +<para>The identifier can be any string you like, as long as it doesn't collide with +the identifiers of other plugins or other instances of pdb_mysql. If you +specify multiple pdb_mysql.so entries in 'passdb backend', you also need to +use different identifiers! +</para> + +<para> +Additional options can be given thru the smb.conf file in the [global] section. +</para> + +<para><programlisting> +identifier:mysql host - host name, defaults to 'localhost' +identifier:mysql password +identifier:mysql user - defaults to 'samba' +identifier:mysql database - defaults to 'samba' +identifier:mysql port - defaults to 3306 +identifier:table - Name of the table containing users +</programlisting></para> + +<warning> +<para> +Since the password for the mysql user is stored in the +smb.conf file, you should make the the smb.conf file +readable only to the user that runs samba. This is considered a security +bug and will be fixed soon. +</para> +</warning> + +<para>Names of the columns in this table(I've added column types those columns should have first):</para> + +<para><programlisting> +identifier:logon time column - int(9) +identifier:logoff time column - int(9) +identifier:kickoff time column - int(9) +identifier:pass last set time column - int(9) +identifier:pass can change time column - int(9) +identifier:pass must change time column - int(9) +identifier:username column - varchar(255) - unix username +identifier:domain column - varchar(255) - NT domain user is part of +identifier:nt username column - varchar(255) - NT username +identifier:fullname column - varchar(255) - Full name of user +identifier:home dir column - varchar(255) - Unix homedir path +identifier:dir drive column - varchar(2) - Directory drive path (eg: 'H:') +identifier:logon script column - varchar(255) - Batch file to run on client side when logging on +identifier:profile path column - varchar(255) - Path of profile +identifier:acct desc column - varchar(255) - Some ASCII NT user data +identifier:workstations column - varchar(255) - Workstations user can logon to (or NULL for all) +identifier:unknown string column - varchar(255) - unknown string +identifier:munged dial column - varchar(255) - ? +identifier:uid column - int(9) - Unix user ID (uid) +identifier:gid column - int(9) - Unix user group (gid) +identifier:user sid column - varchar(255) - NT user SID +identifier:group sid column - varchar(255) - NT group ID +identifier:lanman pass column - varchar(255) - encrypted lanman password +identifier:nt pass column - varchar(255) - encrypted nt passwd +identifier:plain pass column - varchar(255) - plaintext password +identifier:acct control column - int(9) - nt user data +identifier:unknown 3 column - int(9) - unknown +identifier:logon divs column - int(9) - ? +identifier:hours len column - int(9) - ? +identifier:unknown 5 column - int(9) - unknown +identifier:unknown 6 column - int(9) - unknown +</programlisting></para> + +<para> +Eventually, you can put a colon (:) after the name of each column, which +should specify the column to update when updating the table. You can also +specify nothing behind the colon - then the data from the field will not be +updated. +</para> + +</sect2> + +<sect2> +<title>Using plaintext passwords or encrypted password</title> + +<para> +I strongly discourage the use of plaintext passwords, however, you can use them: +</para> + +<para> +If you would like to use plaintext passwords, set 'identifier:lanman pass column' and 'identifier:nt pass column' to 'NULL' (without the quotes) and 'identifier:plain pass column' to the name of the column containing the plaintext passwords. +</para> + +<para> +If you use encrypted passwords, set the 'identifier:plain pass column' to 'NULL' (without the quotes). This is the default. +</para> + +</sect2> + +<sect2> +<title>Getting non-column data from the table</title> + +<para> +It is possible to have not all data in the database and making some 'constant'. +</para> + +<para> +For example, you can set 'identifier:fullname column' to : +<command>CONCAT(First_name,' ',Sur_name)</command> +</para> + +<para> +Or, set 'identifier:workstations column' to : +<command>NULL</command></para> + +<para>See the MySQL documentation for more language constructs.</para> + +</sect2> +</sect1> + +<sect1> +<title>Passdb XML plugin</title> + +<sect2> +<title>Building</title> + +<para>This module requires libxml2 to be installed.</para> + +<para>To build pdb_xml, run: <command>make bin/pdb_xml.so</command> in +the directory <filename>source/</filename>. </para> + +</sect2> + +<sect2> +<title>Usage</title> + +<para>The usage of pdb_xml is pretty straightforward. To export data, use: + +<command>pdbedit -e plugin:/usr/lib/samba/pdb_xml.so:filename</command> + +(where filename is the name of the file to put the data in) +</para> + +<para> +To import data, use: +<command>pdbedit -i plugin:/usr/lib/samba/pdb_xml.so:filename -e current-pdb</command> + +Where filename is the name to read the data from and current-pdb to put it in. +</para> +</sect2> +</sect1> + +</chapter> diff --git a/docs/docbook/projdoc/unicode.sgml b/docs/docbook/projdoc/unicode.sgml new file mode 100644 index 0000000000..7d8f0a03be --- /dev/null +++ b/docs/docbook/projdoc/unicode.sgml @@ -0,0 +1,93 @@ +<chapter id="unicode"> +<chapterinfo> + <author> + <firstname>Jelmer</firstname><surname>Vernooij</surname> + <affiliation> + <orgname>Samba Team</orgname> + <address><email>jelmer@samba.org</email></address> + </affiliation> + </author> + <pubdate>25 March 2003</pubdate> +</chapterinfo> + +<title>Unicode/Charsets</title> + +<sect1> +<title>What are charsets and unicode?</title> + +<para> +Computers communicate in numbers. In texts, each number will be +translated to a corresponding letter. The meaning that will be assigned +to a certain number depends on the <emphasis>character set(charset) +</emphasis> that is used. +A charset can be seen as a table that is used to translate numbers to +letters. Not all computers use the same charset (there are charsets +with German umlauts, Japanese characters, etc). Usually a charset contains +256 characters, which means that storing a character with it takes +exactly one byte. </para> + +<para> +There are also charsets that support even more characters, +but those need twice(or even more) as much storage space. These +charsets can contain <command>256 * 256 = 65536</command> characters, which +is more then all possible characters one could think of. They are called +multibyte charsets (because they use more then one byte to +store one character). +</para> + +<para> +A standardised multibyte charset is unicode, info available at +<ulink url="http://www.unicode.org/">www.unicode.org</ulink>. +Big advantage of using a multibyte charset is that you only need one; no +need to make sure two computers use the same charset when they are +communicating. +</para> + +<para>Old windows clients used to use single-byte charsets, named +'codepages' by microsoft. However, there is no support for +negotiating the charset to be used in the smb protocol. Thus, you +have to make sure you are using the same charset when talking to an old client. +Newer clients (Windows NT, 2K, XP) talk unicode over the wire. +</para> +</sect1> + +<sect1> +<title>Samba and charsets</title> + +<para> +As of samba 3.0, samba can (and will) talk unicode over the wire. Internally, +samba knows of three kinds of character sets: +</para> + +<variablelist> + <varlistentry> + <term>unix charset</term> + <listitem><para> + This is the charset used internally by your operating system. + The default is <emphasis>ASCII</emphasis>, which is fine for most + systems. + </para></listitem> + </varlistentry> + + <varlistentry> + <term>display charset</term> + <listitem><para>This is the charset samba will use to print messages + on your screen. It should generally be the same as the <command>unix charset</command>. + </para></listitem> + </varlistentry> + + <varlistentry> + <term>dos charset</term> + <listitem><para>This is the charset samba uses when communicating with + DOS and Windows 9x clients. It will talk unicode to all newer clients. + The default depends on the charsets you have installed on your system. + Run <command>testparm -v | grep "dos charset"</command> to see + what the default is on your system. + </para></listitem> + </varlistentry> +</variablelist> + +<para> + +</sect1> +</chapter> diff --git a/docs/docbook/smbdotconf/base/adsserver.xml b/docs/docbook/smbdotconf/base/adsserver.xml new file mode 100644 index 0000000000..4dd2a4b635 --- /dev/null +++ b/docs/docbook/smbdotconf/base/adsserver.xml @@ -0,0 +1,15 @@ +<samba:parameter name="ads server" + context="G" + basic="1" advanced="1" wizard="1" developer="1" + xmlns:samba="http://samba.org/common"> +<listitem> + <para>If this option is specified, samba does not try to figure out what + ads server to use itself, but uses the specified ads server. Either one + DNS name or IP address can be used.</para> + + <para>Default: <command moreinfo="none">ads server = </command></para> + + <para>Example: <command moreinfo="none">ads server = 192.168.1.2</command></para> +</listitem> + +</samba:parameter> diff --git a/docs/docbook/smbdotconf/base/bindinterfacesonly.xml b/docs/docbook/smbdotconf/base/bindinterfacesonly.xml new file mode 100644 index 0000000000..3ad9aa4614 --- /dev/null +++ b/docs/docbook/smbdotconf/base/bindinterfacesonly.xml @@ -0,0 +1,71 @@ +<samba:parameter name="bind interfaces only" + context="G" + advanced="1" wizard="1" developer="1" + xmlns:samba="http://samba.org/common"> +<listitem> + <para>This global parameter allows the Samba admin + to limit what interfaces on a machine will serve SMB requests. It + affects file service <citerefentry><refentrytitle>smbd</refentrytitle> + <manvolnum>8</manvolnum></citerefentry> and name service <citerefentry><refentrytitle>nmbd</refentrytitle> + <manvolnum>8</manvolnum></citerefentry> in a slightly different ways.</para> + + <para>For name service it causes <command moreinfo="none">nmbd</command> to bind + to ports 137 and 138 on the interfaces listed in + the <link linkend="INTERFACES">interfaces</link> parameter. <command moreinfo="none">nmbd</command> also + binds to the "all addresses" interface (0.0.0.0) + on ports 137 and 138 for the purposes of reading broadcast messages. + If this option is not set then <command moreinfo="none">nmbd</command> will service + name requests on all of these sockets. If <parameter moreinfo="none">bind interfaces + only</parameter> is set then <command moreinfo="none">nmbd</command> will check the + source address of any packets coming in on the broadcast sockets + and discard any that don't match the broadcast addresses of the + interfaces in the <parameter moreinfo="none">interfaces</parameter> parameter list. + As unicast packets are received on the other sockets it allows + <command moreinfo="none">nmbd</command> to refuse to serve names to machines that + send packets that arrive through any interfaces not listed in the + <parameter moreinfo="none">interfaces</parameter> list. IP Source address spoofing + does defeat this simple check, however, so it must not be used + seriously as a security feature for <command moreinfo="none">nmbd</command>.</para> + + <para>For file service it causes <citerefentry><refentrytitle>smbd</refentrytitle> + <manvolnum>8</manvolnum></citerefentry> to bind only to the interface list + given in the <link linkend="INTERFACES">interfaces</link> parameter. This + restricts the networks that <command moreinfo="none">smbd</command> will serve + to packets coming in those interfaces. Note that you should not use this parameter + for machines that are serving PPP or other intermittent or non-broadcast network + interfaces as it will not cope with non-permanent interfaces.</para> + + <para>If <parameter moreinfo="none">bind interfaces only</parameter> is set then + unless the network address <emphasis>127.0.0.1</emphasis> is added + to the <parameter moreinfo="none">interfaces</parameter> parameter + list <citerefentry><refentrytitle>smbpasswd</refentrytitle> + <manvolnum>8</manvolnum></citerefentry> and <citerefentry><refentrytitle>swat</refentrytitle> + <manvolnum>8</manvolnum></citerefentry> may not work as expected due + to the reasons covered below.</para> + + <para>To change a users SMB password, the <command moreinfo="none">smbpasswd</command> + by default connects to the <emphasis>localhost - 127.0.0.1</emphasis> + address as an SMB client to issue the password change request. If + <parameter moreinfo="none">bind interfaces only</parameter> is set then unless the + network address <emphasis>127.0.0.1</emphasis> is added to the + <parameter moreinfo="none">interfaces</parameter> parameter list then <command moreinfo="none"> + smbpasswd</command> will fail to connect in it's default mode. + <command moreinfo="none">smbpasswd</command> can be forced to use the primary IP interface + of the local host by using its <citerefentry><refentrytitle>smbpasswd</refentrytitle> + <manvolnum>8</manvolnum></citerefentry> <parameter moreinfo="none">-r <replaceable>remote machine</replaceable></parameter> + parameter, with <replaceable>remote machine</replaceable> set + to the IP name of the primary interface of the local host.</para> + + <para>The <command moreinfo="none">swat</command> status page tries to connect with + <command moreinfo="none">smbd</command> and <command moreinfo="none">nmbd</command> at the address + <emphasis>127.0.0.1</emphasis> to determine if they are running. + Not adding <emphasis>127.0.0.1</emphasis> will cause <command moreinfo="none"> + smbd</command> and <command moreinfo="none">nmbd</command> to always show + "not running" even if they really are. This can prevent <command moreinfo="none"> + swat</command> from starting/stopping/restarting <command moreinfo="none">smbd</command> + and <command moreinfo="none">nmbd</command>.</para> + + <para>Default: <command moreinfo="none">bind interfaces only = no</command></para> + +</listitem> +</samba:parameter> diff --git a/docs/docbook/smbdotconf/base/comment.xml b/docs/docbook/smbdotconf/base/comment.xml new file mode 100644 index 0000000000..f08d06ef25 --- /dev/null +++ b/docs/docbook/smbdotconf/base/comment.xml @@ -0,0 +1,18 @@ +<samba:parameter name="comment" + context="S" + basic="1" advanced="1" share="1" print="1" developer="1" + xmlns:samba="http://samba.org/common"> +<listitem> + <para>This is a text field that is seen next to a share + when a client does a queries the server, either via the network + neighborhood or via <command moreinfo="none">net view</command> to list what shares + are available.</para> + + <para>If you want to set the string that is displayed next to the + machine name then see the <link linkend="SERVERSTRING"><parameter moreinfo="none"> + server string</parameter></link> parameter.</para> + + <para>Default: <emphasis>No comment string</emphasis></para> + <para>Example: <command moreinfo="none">comment = Fred's Files</command></para> +</listitem> +</samba:parameter> diff --git a/docs/docbook/smbdotconf/base/directory.xml b/docs/docbook/smbdotconf/base/directory.xml new file mode 100644 index 0000000000..f912c39c8c --- /dev/null +++ b/docs/docbook/smbdotconf/base/directory.xml @@ -0,0 +1,9 @@ +<samba:parameter name="directory" + context="S" + hide="1" + xmlns:samba="http://samba.org/common"> + +<listitem> + <para>Synonym for <link linkend="PATH"><parameter moreinfo="none">path</parameter></link>.</para> +</listitem> +</samba:parameter> diff --git a/docs/docbook/smbdotconf/base/displaycharset.xml b/docs/docbook/smbdotconf/base/displaycharset.xml new file mode 100644 index 0000000000..e02842ab48 --- /dev/null +++ b/docs/docbook/smbdotconf/base/displaycharset.xml @@ -0,0 +1,16 @@ +<samba:parameter name="display charset" + context="G" + advanced="1" developer="1" + xmlns:samba="http://samba.org/common"> +<listitem> + <para>Specifies the charset that samba will use + to print messages to stdout and stderr and SWAT will use. + Should generally be the same as the <command moreinfo="none">unix charset</command>. + </para> + + <para>Default: <command moreinfo="none">display charset = ASCII</command></para> + + <para>Example: <command moreinfo="none">display charset = UTF8</command></para> + +</listitem> +</samba:parameter> diff --git a/docs/docbook/smbdotconf/base/doscharset.xml b/docs/docbook/smbdotconf/base/doscharset.xml new file mode 100644 index 0000000000..5fc718dcaa --- /dev/null +++ b/docs/docbook/smbdotconf/base/doscharset.xml @@ -0,0 +1,16 @@ +<samba:parameter name="dos charset" + context="G" + advanced="1" developer="1" + xmlns:samba="http://samba.org/common"> +<listitem> + <para>DOS SMB clients assume the server has + the same charset as they do. This option specifies which + charset Samba should talk to DOS clients. + </para> + + <para>The default depends on which charsets you have installed. + Samba tries to use charset 850 but falls back to ASCII in + case it is not available. Run <citerefentry><refentrytitle>testparm</refentrytitle> + <manvolnum>1</manvolnum></citerefentry> to check the default on your system.</para> +</listitem> +</samba:parameter> diff --git a/docs/docbook/smbdotconf/base/interfaces.xml b/docs/docbook/smbdotconf/base/interfaces.xml new file mode 100644 index 0000000000..3fa346e206 --- /dev/null +++ b/docs/docbook/smbdotconf/base/interfaces.xml @@ -0,0 +1,51 @@ +<samba:parameter name="interfaces" + context="G" + basic="1" advanced="1" wizard="1" developer="1" + xmlns:samba="http://samba.org/common"> +<listitem> + <para>This option allows you to override the default + network interfaces list that Samba will use for browsing, name + registration and other NBT traffic. By default Samba will query + the kernel for the list of all active interfaces and use any + interfaces except 127.0.0.1 that are broadcast capable.</para> + + <para>The option takes a list of interface strings. Each string + can be in any of the following forms:</para> + + <itemizedlist> + <listitem><para>a network interface name (such as eth0). + This may include shell-like wildcards so eth* will match + any interface starting with the substring "eth"</para></listitem> + + <listitem><para>an IP address. In this case the netmask is + determined from the list of interfaces obtained from the + kernel</para></listitem> + + <listitem><para>an IP/mask pair. </para></listitem> + + <listitem><para>a broadcast/mask pair.</para></listitem> + </itemizedlist> + + <para>The "mask" parameters can either be a bit length (such + as 24 for a C class network) or a full netmask in dotted + decimal form.</para> + + <para>The "IP" parameters above can either be a full dotted + decimal IP address or a hostname which will be looked up via + the OS's normal hostname resolution mechanisms.</para> + + <para>For example, the following line:</para> + + <para><command moreinfo="none">interfaces = eth0 192.168.2.10/24 192.168.3.10/255.255.255.0</command></para> + + <para>would configure three network interfaces corresponding + to the eth0 device and IP addresses 192.168.2.10 and 192.168.3.10. + The netmasks of the latter two interfaces would be set to 255.255.255.0.</para> + + <para>See also <link linkend="BINDINTERFACESONLY"><parameter moreinfo="none">bind + interfaces only</parameter></link>.</para> + + <para>Default: <emphasis>all active interfaces except 127.0.0.1 + that are broadcast capable</emphasis></para> +</listitem> +</samba:parameter> diff --git a/docs/docbook/smbdotconf/base/netbiosaliases.xml b/docs/docbook/smbdotconf/base/netbiosaliases.xml new file mode 100644 index 0000000000..a62fb8f7d6 --- /dev/null +++ b/docs/docbook/smbdotconf/base/netbiosaliases.xml @@ -0,0 +1,20 @@ +<samba:parameter name="netbios aliases" + context="G" + advanced="1" wizard="1" developer="1" + xmlns:samba="http://samba.org/common"> +<listitem> + <para>This is a list of NetBIOS names that <ulink url="nmbd.8.html">nmbd(8)</ulink> will + advertise as additional names by which the Samba server is known. This allows one machine + to appear in browse lists under multiple names. If a machine is acting as a browse server + or logon server none of these names will be advertised as either browse server or logon + servers, only the primary name of the machine will be advertised with these capabilities. + </para> + + <para>See also <link linkend="NETBIOSNAME"><parameter moreinfo="none">netbios + name</parameter></link>.</para> + + <para>Default: <emphasis>empty string (no additional names)</emphasis></para> + + <para>Example: <command moreinfo="none">netbios aliases = TEST TEST1 TEST2</command></para> +</listitem> +</samba:parameter> diff --git a/docs/docbook/smbdotconf/base/netbiosname.xml b/docs/docbook/smbdotconf/base/netbiosname.xml new file mode 100644 index 0000000000..287a8f9f9f --- /dev/null +++ b/docs/docbook/smbdotconf/base/netbiosname.xml @@ -0,0 +1,20 @@ +<samba:parameter name="netbios name" + context="G" + basic="1" advanced="1" wizard="1" developer="1" + xmlns:samba="http://samba.org/common"> +<listitem> + <para>This sets the NetBIOS name by which a Samba + server is known. By default it is the same as the first component + of the host's DNS name. If a machine is a browse server or + logon server this name (or the first component + of the hosts DNS name) will be the name that these services are + advertised under.</para> + + <para>See also <link linkend="NETBIOSALIASES"><parameter moreinfo="none">netbios + aliases</parameter></link>.</para> + + <para>Default: <emphasis>machine DNS name</emphasis></para> + + <para>Example: <command moreinfo="none">netbios name = MYNAME</command></para> +</listitem> +</samba:parameter> diff --git a/docs/docbook/smbdotconf/base/netbiosscope.xml b/docs/docbook/smbdotconf/base/netbiosscope.xml new file mode 100644 index 0000000000..8c5866bc32 --- /dev/null +++ b/docs/docbook/smbdotconf/base/netbiosscope.xml @@ -0,0 +1,10 @@ +<samba:parameter name="netbios scope" + context="G" + advanced="1" developer="1" + xmlns:samba="http://samba.org/common"> +<listitem> + <para>This sets the NetBIOS scope that Samba will + operate under. This should not be set unless every machine + on your LAN also sets this value.</para> +</listitem> +</samba:parameter> diff --git a/docs/docbook/smbdotconf/base/path.xml b/docs/docbook/smbdotconf/base/path.xml new file mode 100644 index 0000000000..9f0a7cd976 --- /dev/null +++ b/docs/docbook/smbdotconf/base/path.xml @@ -0,0 +1,31 @@ +<samba:parameter name="path" + context="S" + basic="1" advanced="1" share="1" print="1" developer="1" + xmlns:samba="http://samba.org/common"> +<listitem> + <para>This parameter specifies a directory to which + the user of the service is to be given access. In the case of + printable services, this is where print data will spool prior to + being submitted to the host for printing.</para> + + <para>For a printable service offering guest access, the service + should be readonly and the path should be world-writeable and + have the sticky bit set. This is not mandatory of course, but + you probably won't get the results you expect if you do + otherwise.</para> + + <para>Any occurrences of <parameter moreinfo="none">%u</parameter> in the path + will be replaced with the UNIX username that the client is using + on this connection. Any occurrences of <parameter moreinfo="none">%m</parameter> + will be replaced by the NetBIOS name of the machine they are + connecting from. These replacements are very useful for setting + up pseudo home directories for users.</para> + + <para>Note that this path will be based on <link linkend="ROOTDIR"> + <parameter moreinfo="none">root dir</parameter></link> if one was specified.</para> + + <para>Default: <emphasis>none</emphasis></para> + + <para>Example: <command moreinfo="none">path = /home/fred</command></para> +</listitem> +</samba:parameter> diff --git a/docs/docbook/smbdotconf/base/realm.xml b/docs/docbook/smbdotconf/base/realm.xml new file mode 100644 index 0000000000..c0b1d1aad6 --- /dev/null +++ b/docs/docbook/smbdotconf/base/realm.xml @@ -0,0 +1,15 @@ +<samba:parameter name="realm" + context="G" + basic="1" advanced="1" wizard="1" developer="1" + xmlns:samba="http://samba.org/common"> +<listitem> + <para>This option specifies the kerberos realm to use. The realm is + used as the ADS equivalent of the NT4 <command moreinfo="none">domain</command>. It + is usually set to the DNS name of the kerberos server. + </para> + + <para>Default: <command moreinfo="none">realm = </command></para> + + <para>Example: <command moreinfo="none">realm = mysambabox.mycompany.com</command></para> +</listitem> +</samba:parameter> diff --git a/docs/docbook/smbdotconf/base/serverstring.xml b/docs/docbook/smbdotconf/base/serverstring.xml new file mode 100644 index 0000000000..5935dd80dd --- /dev/null +++ b/docs/docbook/smbdotconf/base/serverstring.xml @@ -0,0 +1,24 @@ +<samba:parameter name="server string" + context="G" + basic="1" advanced="1" developer="1" + xmlns:samba="http://samba.org/common"> +<listitem> + <para>This controls what string will show up in the printer comment box in print + manager and next to the IPC connection in <command moreinfo="none">net view</command>. It + can be any string that you wish to show to your users.</para> + + <para>It also sets what will appear in browse lists next + to the machine name.</para> + + <para>A <parameter moreinfo="none">%v</parameter> will be replaced with the Samba + version number.</para> + + <para>A <parameter moreinfo="none">%h</parameter> will be replaced with the + hostname.</para> + + <para>Default: <command moreinfo="none">server string = Samba %v</command></para> + + <para>Example: <command moreinfo="none">server string = University of GNUs Samba + Server</command></para> +</listitem> +</samba:parameter> diff --git a/docs/docbook/smbdotconf/base/unixcharset.xml b/docs/docbook/smbdotconf/base/unixcharset.xml new file mode 100644 index 0000000000..f003c097aa --- /dev/null +++ b/docs/docbook/smbdotconf/base/unixcharset.xml @@ -0,0 +1,15 @@ +<samba:parameter name="unix charset" + context="G" + advanced="1" developer="1" + xmlns:samba="http://samba.org/common"> +<listitem> + <para>Specifies the charset the unix machine + Samba runs on uses. Samba needs to know this in order to be able to + convert text to the charsets other SMB clients use. + </para> + + <para>Default: <command moreinfo="none">unix charset = UTF8</command></para> + + <para>Example: <command moreinfo="none">unix charset = ASCII</command></para> +</listitem> +</samba:parameter> diff --git a/docs/docbook/smbdotconf/base/workgroup.xml b/docs/docbook/smbdotconf/base/workgroup.xml new file mode 100644 index 0000000000..65300bca58 --- /dev/null +++ b/docs/docbook/smbdotconf/base/workgroup.xml @@ -0,0 +1,16 @@ +<samba:parameter name="workgroup" + context="G" + basic="1" advanced="1" wizard="1" developer="1" + xmlns:samba="http://samba.org/common"> +<listitem> + <para>This controls what workgroup your server will + appear to be in when queried by clients. Note that this parameter + also controls the Domain name used with + the <link linkend="SECURITYEQUALSDOMAIN"><command moreinfo="none">security = domain</command></link> + setting.</para> + + <para>Default: <emphasis>set at compile time to WORKGROUP</emphasis></para> + + <para>Example: <command moreinfo="none">workgroup = MYGROUP</command></para> +</listitem> +</samba:parameter> diff --git a/docs/docbook/smbdotconf/generate-file-list.sh b/docs/docbook/smbdotconf/generate-file-list.sh new file mode 100755 index 0000000000..3495f50c43 --- /dev/null +++ b/docs/docbook/smbdotconf/generate-file-list.sh @@ -0,0 +1,8 @@ +#!/bin/sh +echo "<variablelist>" +find . -type f -name '*.xml' -mindepth 2 | sort -t/ -k3 | + while read ; do + echo "<xi:include href='$REPLY' parse='xml' xmlns:xi='http://www.w3.org/2001/XInclude'/>" + done + +echo "</variablelist>" diff --git a/docs/docbook/smbdotconf/smbconf.dtd b/docs/docbook/smbdotconf/smbconf.dtd new file mode 100644 index 0000000000..591c9b2738 --- /dev/null +++ b/docs/docbook/smbdotconf/smbconf.dtd @@ -0,0 +1,10 @@ +<!ELEMENT parameter (#PCDATA) > +<!ATTLIST parameter name CDATA #REQUIRED > +<!ATTLIST parameter context CDATA #REQUIRED > +<!ATTLIST parameter basic CDATA #REQUIRED > +<!ATTLIST parameter wizard CDATA #REQUIRED > +<!ATTLIST parameter advanced CDATA #REQUIRED > +<!ATTLIST parameter share CDATA #REQUIRED > +<!ATTLIST parameter print CDATA #REQUIRED > +<!ATTLIST parameter developer CDATA #REQUIRED > +<!ATTLIST parameter hide CDATA #REQUIRED > diff --git a/docs/docbook/smbdotconf/split-original-smb.conf.xsl b/docs/docbook/smbdotconf/split-original-smb.conf.xsl new file mode 100644 index 0000000000..7a6a2b920a --- /dev/null +++ b/docs/docbook/smbdotconf/split-original-smb.conf.xsl @@ -0,0 +1,78 @@ +<?xml version='1.0'?> +<!-- vim:set sts=2 shiftwidth=2 syntax=xml: --> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + xmlns:exsl="http://exslt.org/common" + xmlns:samba="http://samba.org/common" + version="1.1" + extension-element-prefixes="exsl"> + +<xsl:output method="xml"/> + +<xsl:param name="output.dir.name" select="'test/'"/> + +<!-- This is needed to copy content unchanged --> +<xsl:template match="@*|node()"> + <xsl:copy> + <xsl:apply-templates select="@*|node()"/> + </xsl:copy> +</xsl:template> + +<!-- Parse all varlistentries and extract those of them which are descriptions of smb.conf + parameters. We determine them by existence of <anchor> element inside <term> element. + If <anchor> is there, then its 'id' attribute is translated to lower case and is used + as basis for file name for that parameter. +--> +<xsl:template match="varlistentry"> + <xsl:variable name="output.dir.name" select="$output.dir.name"/> + <!-- Extract anchor's 'id' and translate it to lower case --> + <xsl:variable name="fname"> + <xsl:value-of select="translate(string(term/anchor/@id), + 'ABCDEFGHIJKLMNOPQRSTUVWXYZ','abcdefghijklmnopqrstuvwxyz')"/> + </xsl:variable> + <!-- reconstruct varlistentry - not all of them will go into separate files + and also we must repair the main varlistentry itself. + --> + <xsl:variable name="content"> + <xsl:apply-templates/> + </xsl:variable> + <!-- Now put varlistentry into separate file _if_ it has anchor associated with it --> + <xsl:choose> + <xsl:when test="$fname != ''"> + <!-- full file name --> + <xsl:variable name="filename"><xsl:value-of select="$output.dir.name"/><xsl:value-of select="$fname"/>.xml</xsl:variable> + <!-- Debug message for an operator, just to show progress of processing :) --> + <xsl:message> + <xsl:text>Writing </xsl:text> + <xsl:value-of select="$filename"/> + <xsl:text> for </xsl:text> + <xsl:value-of select="name(.)"/> + <xsl:if test="term/anchor/@id"> + <xsl:text>(</xsl:text> + <xsl:value-of select="term/anchor/@id"/> + <xsl:text>)</xsl:text> + </xsl:if> + </xsl:message> + <!-- Write finally varlistentry to a separate file --> + <exsl:document href="{$filename}" + method="xml" + encoding="UTF-8" + indent="yes" + omit-xml-declaration="yes"> + <xsl:element name="samba:parameter"> + <xsl:copy-of select="$content"/> + </xsl:element> + </exsl:document> + <xsl:text disable-output-escaping="yes">&smb.</xsl:text> + <xsl:value-of select="$fname"/> + <xsl:text>;</xsl:text> + </xsl:when> + <!-- this was a varlistentry w/o anchor associated, just dump it to the main document --> + <xsl:otherwise> + <xsl:element name="varlistentry"> + <xsl:copy-of select="$content"/> + </xsl:element> + </xsl:otherwise> + </xsl:choose> +</xsl:template> + +</xsl:stylesheet> diff --git a/source3/include/popt_common.h b/source3/include/popt_common.h new file mode 100644 index 0000000000..57850bf682 --- /dev/null +++ b/source3/include/popt_common.h @@ -0,0 +1,48 @@ +/* + Unix SMB/CIFS implementation. + Common popt arguments + Copyright (C) Jelmer Vernooij 2003 + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _POPT_COMMON_H +#define _POPT_COMMON_H + +/* Common popt structures */ +extern struct poptOption popt_common_samba[]; +extern struct poptOption popt_common_connection[]; +extern struct poptOption popt_common_version[]; +extern struct poptOption popt_common_credentials[]; + +#ifndef POPT_TABLEEND +#define POPT_TABLEEND { NULL, '\0', 0, 0, 0, NULL, NULL } +#endif + +#define POPT_COMMON_SAMBA { NULL, 0, POPT_ARG_INCLUDE_TABLE, popt_common_samba, 0, "Common samba options:", NULL }, +#define POPT_COMMON_CONNECTION { NULL, 0, POPT_ARG_INCLUDE_TABLE, popt_common_connection, 0, "Connection options:", NULL }, +#define POPT_COMMON_VERSION { NULL, 0, POPT_ARG_INCLUDE_TABLE, popt_common_version, 0, "Common samba options:", NULL }, +#define POPT_COMMON_CREDENTIALS { NULL, 0, POPT_ARG_INCLUDE_TABLE, popt_common_credentials, 0, "Authentication options:", NULL }, + +struct user_auth_info { + pstring username; + pstring password; + BOOL got_pass; + BOOL use_kerberos; +}; + +extern struct user_auth_info cmdline_auth_info; + +#endif /* _POPT_COMMON_H */ diff --git a/source3/modules/vfs_fake_perms.c b/source3/modules/vfs_fake_perms.c new file mode 100644 index 0000000000..121a99a451 --- /dev/null +++ b/source3/modules/vfs_fake_perms.c @@ -0,0 +1,287 @@ +/* + * Fake Perms VFS module. Implements passthrough operation of all VFS + * calls to disk functions, except for file permissions, which are now + * mode 0700 for the current uid/gid. + * + * Copyright (C) Tim Potter, 1999-2000 + * Copyright (C) Alexander Bokovoy, 2002 + * Copyright (C) Andrew Bartlett, 2002 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "config.h" + +#include <stdio.h> +#include <sys/stat.h> +#ifdef HAVE_UTIME_H +#include <utime.h> +#endif +#ifdef HAVE_DIRENT_H +#include <dirent.h> +#endif +#ifdef HAVE_FCNTL_H +#include <fcntl.h> +#endif +#include <errno.h> +#include <string.h> + +#include <includes.h> +#include <vfs.h> + +static struct vfs_ops default_vfs_ops; /* For passthrough operation */ +static struct smb_vfs_handle_struct *fake_perms_handle; /* use fake_perms_handle->data for storing per-instance private data */ + +static int fake_perms_stat(struct connection_struct *conn, const char *fname, SMB_STRUCT_STAT *sbuf) +{ + int ret = default_vfs_ops.stat(conn, fname, sbuf); + if (ret == 0) { + extern struct current_user current_user; + + if (S_ISDIR(sbuf->st_mode)) { + sbuf->st_mode = S_IFDIR | S_IRWXU; + } else { + sbuf->st_mode = S_IRWXU; + } + sbuf->st_uid = current_user.uid; + sbuf->st_gid = current_user.gid; + } + return ret; +} + +static int fake_perms_fstat(struct files_struct *fsp, int fd, SMB_STRUCT_STAT *sbuf) +{ + int ret = default_vfs_ops.fstat(fsp, fd, sbuf); + if (ret == 0) { + extern struct current_user current_user; + + if (S_ISDIR(sbuf->st_mode)) { + sbuf->st_mode = S_IFDIR | S_IRWXU; + } else { + sbuf->st_mode = S_IRWXU; + } + sbuf->st_uid = current_user.uid; + sbuf->st_gid = current_user.gid; + } + return ret; +} + +#if 0 +static size_t fake_perms_fget_nt_acl(struct files_struct *fsp, int fd, struct security_descriptor_info **ppdesc) +{ + return default_vfs_ops.fget_nt_acl(fsp, fd, ppdesc); +} + +static size_t fake_perms_get_nt_acl(struct files_struct *fsp, const char *name, struct security_descriptor_info **ppdesc) +{ + return default_vfs_ops.get_nt_acl(fsp, name, ppdesc); +} + +static BOOL fake_perms_fset_nt_acl(struct files_struct *fsp, int fd, uint32 security_info_sent, struct security_descriptor_info *psd) +{ + return default_vfs_ops.fset_nt_acl(fsp, fd, security_info_sent, psd); +} + +static BOOL fake_perms_set_nt_acl(struct files_struct *fsp, const char *name, uint32 security_info_sent, struct security_descriptor_info *psd) +{ + return default_vfs_ops.set_nt_acl(fsp, name, security_info_sent, psd); +} + +static BOOL fake_perms_chmod_acl(struct connection_struct *conn, const char *name, mode_t mode) +{ + return default_vfs_ops.chmod_acl(conn, name, mode); +} + +static BOOL fake_perms_fchmod_acl(struct files_struct *fsp, int fd, mode_t mode) +{ + return default_vfs_ops.fchmod_acl(fsp, fd, mode); +} + +static int fake_perms_sys_acl_get_entry(struct connection_struct *conn, SMB_ACL_T theacl, int entry_id, SMB_ACL_ENTRY_T *entry_p) +{ + return default_vfs_ops.sys_acl_get_entry(conn, theacl, entry_id, entry_p); +} + +static int fake_perms_sys_acl_get_tag_type(struct connection_struct *conn, SMB_ACL_ENTRY_T entry_d, SMB_ACL_TAG_T *tag_type_p) +{ + return default_vfs_ops.sys_acl_get_tag_type(conn, entry_d, tag_type_p); +} + +static int fake_perms_sys_acl_get_permset(struct connection_struct *conn, SMB_ACL_ENTRY_T entry_d, SMB_ACL_PERMSET_T *permset_p) +{ + return default_vfs_ops.sys_acl_get_permset(conn, entry_d, permset_p); +} + +static void *fake_perms_sys_acl_get_qualifier(struct connection_struct *conn, SMB_ACL_ENTRY_T entry_d) +{ + return default_vfs_ops.sys_acl_get_qualifier(conn, entry_d); +} + +static SMB_ACL_T fake_perms_sys_acl_get_file(struct connection_struct *conn, const char *path_p, SMB_ACL_TYPE_T type) +{ + return default_vfs_ops.sys_acl_get_file(conn, path_p, type); +} + +static SMB_ACL_T fake_perms_sys_acl_get_fd(struct files_struct *fsp, int fd) +{ + return default_vfs_ops.sys_acl_get_fd(fsp, fd); +} + +static int fake_perms_sys_acl_clear_perms(struct connection_struct *conn, SMB_ACL_PERMSET_T permset) +{ + return default_vfs_ops.sys_acl_clear_perms(conn, permset); +} + +static int fake_perms_sys_acl_add_perm(struct connection_struct *conn, SMB_ACL_PERMSET_T permset, SMB_ACL_PERM_T perm) +{ + return default_vfs_ops.sys_acl_add_perm(conn, permset, perm); +} + +static char *fake_perms_sys_acl_to_text(struct connection_struct *conn, SMB_ACL_T theacl, ssize_t *plen) +{ + return default_vfs_ops.sys_acl_to_text(conn, theacl, plen); +} + +static SMB_ACL_T fake_perms_sys_acl_init(struct connection_struct *conn, int count) +{ + return default_vfs_ops.sys_acl_init(conn, count); +} + +static int fake_perms_sys_acl_create_entry(struct connection_struct *conn, SMB_ACL_T *pacl, SMB_ACL_ENTRY_T *pentry) +{ + return default_vfs_ops.sys_acl_create_entry(conn, pacl, pentry); +} + +static int fake_perms_sys_acl_set_tag_type(struct connection_struct *conn, SMB_ACL_ENTRY_T entry, SMB_ACL_TAG_T tagtype) +{ + return default_vfs_ops.sys_acl_set_tag_type(conn, entry, tagtype); +} + +static int fake_perms_sys_acl_set_qualifier(struct connection_struct *conn, SMB_ACL_ENTRY_T entry, void *qual) +{ + return default_vfs_ops.sys_acl_set_qualifier(conn, entry, qual); +} + +static int fake_perms_sys_acl_set_permset(struct connection_struct *conn, SMB_ACL_ENTRY_T entry, SMB_ACL_PERMSET_T permset) +{ + return default_vfs_ops.sys_acl_set_permset(conn, entry, permset); +} + +static int fake_perms_sys_acl_valid(struct connection_struct *conn, SMB_ACL_T theacl ) +{ + return default_vfs_ops.sys_acl_valid(conn, theacl ); +} + +static int fake_perms_sys_acl_set_file(struct connection_struct *conn, const char *name, SMB_ACL_TYPE_T acltype, SMB_ACL_T theacl) +{ + return default_vfs_ops.sys_acl_set_file(conn, name, acltype, theacl); +} + +static int fake_perms_sys_acl_set_fd(struct files_struct *fsp, int fd, SMB_ACL_T theacl) +{ + return default_vfs_ops.sys_acl_set_fd(fsp, fd, theacl); +} + +static int fake_perms_sys_acl_delete_def_file(struct connection_struct *conn, const char *path) +{ + return default_vfs_ops.sys_acl_delete_def_file(conn, path); +} + +static int fake_perms_sys_acl_get_perm(struct connection_struct *conn, SMB_ACL_PERMSET_T permset, SMB_ACL_PERM_T perm) +{ + return default_vfs_ops.sys_acl_get_perm(conn, permset, perm); +} + +static int fake_perms_sys_acl_free_text(struct connection_struct *conn, char *text) +{ + return default_vfs_ops.sys_acl_free_text(conn, text); +} + +static int fake_perms_sys_acl_free_acl(struct connection_struct *conn, SMB_ACL_T posix_acl) +{ + return default_vfs_ops.sys_acl_free_acl(conn, posix_acl); +} + +static int fake_perms_sys_acl_free_qualifier(struct connection_struct *conn, void *qualifier, SMB_ACL_TAG_T tagtype) +{ + return default_vfs_ops.sys_acl_free_qualifier(conn, qualifier, tagtype); +} +#endif + +/* VFS operations structure */ + +static vfs_op_tuple fake_perms_ops[] = { + + /* NT File ACL operations */ +#if 0 + {fake_perms_fget_nt_acl, SMB_VFS_OP_FGET_NT_ACL, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_get_nt_acl, SMB_VFS_OP_GET_NT_ACL, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_fset_nt_acl, SMB_VFS_OP_FSET_NT_ACL, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_set_nt_acl, SMB_VFS_OP_SET_NT_ACL, SMB_VFS_LAYER_TRANSPARENT}, + + /* POSIX ACL operations */ + + {fake_perms_chmod_acl, SMB_VFS_OP_CHMOD_ACL, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_fchmod_acl, SMB_VFS_OP_FCHMOD_ACL, SMB_VFS_LAYER_TRANSPARENT}, + + {fake_perms_sys_acl_get_entry, SMB_VFS_OP_SYS_ACL_GET_ENTRY, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_get_tag_type, SMB_VFS_OP_SYS_ACL_GET_TAG_TYPE, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_get_permset, SMB_VFS_OP_SYS_ACL_GET_PERMSET, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_get_qualifier, SMB_VFS_OP_SYS_ACL_GET_QUALIFIER, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_get_file, SMB_VFS_OP_SYS_ACL_GET_FILE, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_get_fd, SMB_VFS_OP_SYS_ACL_GET_FD, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_clear_perms, SMB_VFS_OP_SYS_ACL_CLEAR_PERMS, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_add_perm, SMB_VFS_OP_SYS_ACL_ADD_PERM, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_to_text, SMB_VFS_OP_SYS_ACL_TO_TEXT, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_init, SMB_VFS_OP_SYS_ACL_INIT, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_create_entry, SMB_VFS_OP_SYS_ACL_CREATE_ENTRY, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_set_tag_type, SMB_VFS_OP_SYS_ACL_SET_TAG_TYPE, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_set_qualifier, SMB_VFS_OP_SYS_ACL_SET_QUALIFIER, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_set_permset, SMB_VFS_OP_SYS_ACL_SET_PERMSET, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_valid, SMB_VFS_OP_SYS_ACL_VALID, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_set_file, SMB_VFS_OP_SYS_ACL_SET_FILE, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_set_fd, SMB_VFS_OP_SYS_ACL_SET_FD, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_delete_def_file, SMB_VFS_OP_SYS_ACL_DELETE_DEF_FILE, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_get_perm, SMB_VFS_OP_SYS_ACL_GET_PERM, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_free_text, SMB_VFS_OP_SYS_ACL_FREE_TEXT, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_free_acl, SMB_VFS_OP_SYS_ACL_FREE_ACL, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_sys_acl_free_qualifier, SMB_VFS_OP_SYS_ACL_FREE_QUALIFIER, SMB_VFS_LAYER_TRANSPARENT}, +#endif + + {fake_perms_stat, SMB_VFS_OP_STAT, SMB_VFS_LAYER_TRANSPARENT}, + {fake_perms_fstat, SMB_VFS_OP_FSTAT, SMB_VFS_LAYER_TRANSPARENT}, + {NULL, SMB_VFS_OP_NOOP, SMB_VFS_LAYER_NOOP} +}; + +/* VFS initialisation - return initialized vfs_op_tuple array back to Samba */ + +static vfs_op_tuple *fake_perms_init(const struct vfs_ops *def_vfs_ops, + struct smb_vfs_handle_struct *vfs_handle) +{ + DEBUG(3, ("Initialising default vfs hooks\n")); + + memcpy(&default_vfs_ops, def_vfs_ops, sizeof(struct vfs_ops)); + + /* Remember vfs_handle for further allocation and referencing of private + information in vfs_handle->data + */ + fake_perms_handle = vfs_handle; + return fake_perms_ops; +} + +int vfs_fake_perms_init(void) +{ + return smb_register_vfs("fake_perms", fake_perms_init, SMB_VFS_INTERFACE_VERSION); +} |