summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--source4/lib/ldb/Doxyfile1229
-rw-r--r--source4/lib/ldb/Makefile.in7
-rw-r--r--source4/lib/ldb/configure.in1
-rw-r--r--source4/lib/ldb/examples.dox16
-rw-r--r--source4/lib/ldb/include/ldb.h600
-rw-r--r--source4/lib/ldb/include/ldb_errors.h228
-rw-r--r--source4/lib/ldb/mainpage.dox80
7 files changed, 2090 insertions, 71 deletions
diff --git a/source4/lib/ldb/Doxyfile b/source4/lib/ldb/Doxyfile
new file mode 100644
index 0000000000..6ea10be6e2
--- /dev/null
+++ b/source4/lib/ldb/Doxyfile
@@ -0,0 +1,1229 @@
+# Doxyfile 1.4.4
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+# TAG = value [value, ...]
+# For lists items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME = LDB
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY = apidocs
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
+# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
+# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
+# Swedish, and Ukrainian.
+
+OUTPUT_LANGUAGE = English
+
+# This tag can be used to specify the encoding used in the generated output.
+# The encoding is not always determined by the language that is chosen,
+# but also whether or not the output is meant for Windows or non-Windows users.
+# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
+# forces the Windows encoding (this is the default for the Windows binary),
+# whereas setting the tag to NO uses a Unix-style encoding (the default for
+# all platforms other than Windows).
+
+USE_WINDOWS_ENCODING = NO
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES = YES
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH = include
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH = include
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like the Qt-style comments (thus requiring an
+# explicit @brief command for a brief description.
+
+JAVADOC_AUTOBRIEF = YES
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the DETAILS_AT_TOP tag is set to YES then Doxygen
+# will output the detailed description near the top, like JavaDoc.
+# If set to NO, the detailed description appears after the member
+# documentation.
+
+DETAILS_AT_TOP = YES
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC = NO
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE = 8
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
+# only. Doxygen will then generate output that is more tailored for Java.
+# For instance, namespaces will be presented as packages, qualified scopes
+# will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING = YES
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES = NO
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES = YES
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES = YES
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is YES.
+
+SHOW_DIRECTORIES = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from the
+# version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the progam writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT = include .
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
+
+FILE_PATTERNS = *.h *.dox
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE = include/config.h include/dlinklist.h \
+ include/includes.h
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH = examples
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output. If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES (the default)
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES (the default)
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET =
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS = YES
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND = NO
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE = 4
+
+# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
+# generated containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
+# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
+# probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH = 250
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+
+LATEX_CMD_NAME = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN = YES
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader. This is useful
+# if you want to understand what is going on. On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_PREDEFINED tags.
+
+EXPAND_ONLY_PREDEF = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS = NO
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT = NO
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH = NO
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH = NO
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH = YES
+
+# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
+# generate a call dependency graph for every global function or class method.
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+
+CALL_GRAPH = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY = NO
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS =
+
+# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than
+# this value, doxygen will try to truncate the graph, so that it fits within
+# the specified constraint. Beware that most browsers cannot cope with very
+# large images.
+
+MAX_DOT_GRAPH_WIDTH = 1024
+
+# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than
+# this value, doxygen will try to truncate the graph, so that it fits within
+# the specified constraint. Beware that most browsers cannot cope with very
+# large images.
+
+MAX_DOT_GRAPH_HEIGHT = 1024
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that a graph may be further truncated if the graph's
+# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
+# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
+# the graph is not depth-constrained.
+
+MAX_DOT_GRAPH_DEPTH = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, which results in a white background.
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+
+DOT_TRANSPARENT = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to the search engine
+#---------------------------------------------------------------------------
+
+# The SEARCHENGINE tag specifies whether or not a search engine should be
+# used. If set to NO the values of all tags below this one will be ignored.
+
+SEARCHENGINE = NO
diff --git a/source4/lib/ldb/Makefile.in b/source4/lib/ldb/Makefile.in
index 039e9a657f..cca9f3feb8 100644
--- a/source4/lib/ldb/Makefile.in
+++ b/source4/lib/ldb/Makefile.in
@@ -1,6 +1,7 @@
CC = @CC@
GCOV = @GCOV@
XSLTPROC = @XSLTPROC@
+DOXYGEN = @DOXYGEN@
prefix = @prefix@
exec_prefix = @exec_prefix@
includedir = @includedir@
@@ -76,7 +77,7 @@ MANPAGES = $(patsubst %.xml,%,$(wildcard man/*.xml))
EXAMPLES = examples/ldbreader examples/ldifreader
-all: $(DIRS) $(BINS) $(LIBS) $(EXAMPLES) $(MANPAGES)
+all: $(DIRS) $(BINS) $(LIBS) $(EXAMPLES) $(MANPAGES) doxygen
.c.o:
@echo Compiling $*.c
@@ -131,11 +132,15 @@ examples/ldifreader: examples/ldifreader.o $(LIBS)
%.html: %.xml
test -z "$(XSLTPROC)" || $(XSLTPROC) -o $@ http://docbook.sourceforge.net/release/xsl/current/html/docbook.xsl $<
+doxygen:
+ test -z "$(DOXYGEN)" || $(DOXYGEN)
+
clean:
rm -f */*.o *.gcov */*.gc?? tdbtest.ldb* \
rm -f $(BINS) $(TDB_OBJ) $(TALLOC_OBJ) $(LDB_LIB)
rm -f $(MANPAGES)
rm -f $(EXAMPLES)
+ rm -rf apidocs/
distclean: clean
rm -f *~ */*~
diff --git a/source4/lib/ldb/configure.in b/source4/lib/ldb/configure.in
index 05bc015919..d7b9e566de 100644
--- a/source4/lib/ldb/configure.in
+++ b/source4/lib/ldb/configure.in
@@ -21,6 +21,7 @@ AC_SUBST(WITH_GCOV)
AC_PROG_CC
AC_FUNC_MMAP
AC_PATH_PROG(XSLTPROC,xsltproc)
+AC_PATH_PROG(DOXYGEN,doxygen)
AC_PATH_PROG(GCOV,gcov)
AC_CHECK_HEADERS(stdint.h)
AC_CONFIG_HEADER(include/config.h)
diff --git a/source4/lib/ldb/examples.dox b/source4/lib/ldb/examples.dox
new file mode 100644
index 0000000000..ef4b4f0a40
--- /dev/null
+++ b/source4/lib/ldb/examples.dox
@@ -0,0 +1,16 @@
+/** \example ldbreader.c
+
+The code below shows a simple LDB application.
+
+It lists / dumps the records in a LDB database to standard output.
+
+*/
+
+
+/** \example ldifreader.c
+
+The code below shows a simple LDB application.
+
+It lists / dumps the entries in an LDIF file to standard output.
+
+*/
diff --git a/source4/lib/ldb/include/ldb.h b/source4/lib/ldb/include/ldb.h
index 299a5d171e..2a718334fe 100644
--- a/source4/lib/ldb/include/ldb.h
+++ b/source4/lib/ldb/include/ldb.h
@@ -35,8 +35,17 @@
* Author: Stefan Metzmacher
*/
+/**
+ \file ldb.h Samba's ldb database
+
+ This header file provides the main API for ldb.
+*/
+
#ifndef _LDB_H_
+
+/*! \cond DOXYGEN_IGNORE */
#define _LDB_H_ 1
+/*! \endcond */
/*
major restrictions as compared to normal LDAP:
@@ -53,45 +62,85 @@
*/
-/*
- an individual lump of data in a result comes in this format. The
- pointer will usually be to a UTF-8 string if the application is
- sensible, but it can be to anything you like, including binary data
- blobs of arbitrary size.
-*/
#ifndef ldb_val
+/**
+ Result value
+
+ An individual lump of data in a result comes in this format. The
+ pointer will usually be to a UTF-8 string if the application is
+ sensible, but it can be to anything you like, including binary data
+ blobs of arbitrary size.
+
+ \note the data is null (0x00) terminated, but the length does not
+ include the terminator.
+*/
struct ldb_val {
- uint8_t *data;
- size_t length;
+ uint8_t *data; /*!< result data */
+ size_t length; /*!< length of data */
};
#endif
-/* internal ldb exploded dn structures */
+/**
+ internal ldb exploded dn structures
+*/
struct ldb_dn_component {
- char *name;
+ char *name;
struct ldb_val value;
};
+
struct ldb_dn {
int comp_num;
struct ldb_dn_component *components;
};
-/* these flags are used in ldb_message_element.flags fields. The
- LDA_FLAGS_MOD_* flags are used in ldap_modify() calls to specify
- whether attributes are being added, deleted or modified */
+/**
+ There are a number of flags that are used with ldap_modify() in
+ ldb_message_element.flags fields. The LDA_FLAGS_MOD_ADD,
+ LDA_FLAGS_MOD_DELETE and LDA_FLAGS_MOD_REPLACE flags are used in
+ ldap_modify() calls to specify whether attributes are being added,
+ deleted or modified respectively.
+*/
#define LDB_FLAG_MOD_MASK 0x3
+
+/**
+ Flag value used in ldap_modify() to indicate that attributes are
+ being added.
+
+ \sa LDB_FLAG_MOD_MASK
+*/
#define LDB_FLAG_MOD_ADD 1
+
+/**
+ Flag value used in ldap_modify() to indicate that attributes are
+ being replaced.
+
+ \sa LDB_FLAG_MOD_MASK
+*/
#define LDB_FLAG_MOD_REPLACE 2
+
+/**
+ Flag value used in ldap_modify() to indicate that attributes are
+ being deleted.
+
+ \sa LDB_FLAG_MOD_MASK
+*/
#define LDB_FLAG_MOD_DELETE 3
+/**
+ OID for logic AND comaprison.
-/*
- well known object IDs
+ This is the well known object ID for a logical AND comparitor.
*/
#define LDB_OID_COMPARATOR_AND "1.2.840.113556.1.4.803"
+
+/**
+ OID for logic OR comparison.
+
+ This is the well known object ID for a logical OR comparitor.
+*/
#define LDB_OID_COMPARATOR_OR "1.2.840.113556.1.4.804"
-/*
+/**
results are given back as arrays of ldb_message_element
*/
struct ldb_message_element {
@@ -102,7 +151,7 @@ struct ldb_message_element {
};
-/*
+/**
a ldb_message represents all or part of a record. It can contain an arbitrary
number of elements.
*/
@@ -120,12 +169,15 @@ enum ldb_changetype {
LDB_CHANGETYPE_MODIFY
};
-/*
- a ldif record - from ldif_read
+/**
+ LDIF record
+
+ This structure contains a LDIF record, as returned from ldif_read()
+ and equivalent functions.
*/
struct ldb_ldif {
- enum ldb_changetype changetype;
- struct ldb_message *msg;
+ enum ldb_changetype changetype; /*!< The type of change */
+ struct ldb_message *msg; /*!< The changes */
};
enum ldb_scope {LDB_SCOPE_DEFAULT=-1,
@@ -145,7 +197,7 @@ typedef int (*ldb_traverse_fn)(struct ldb_context *, const struct ldb_message *)
enum ldb_debug_level {LDB_DEBUG_FATAL, LDB_DEBUG_ERROR,
LDB_DEBUG_WARNING, LDB_DEBUG_TRACE};
-/*
+/**
the user can optionally supply a debug function. The function
is based on the vfprintf() style of interface, but with the addition
of a severity level
@@ -156,14 +208,31 @@ struct ldb_debug_ops {
void *context;
};
+/**
+ Flag value for database connection mode.
+
+ If LDB_FLG_RDONLY is used in ldb_connect, then the database will be
+ opened read-only, if possible.
+*/
#define LDB_FLG_RDONLY 1
+
+/**
+ Flag value for database connection mode.
+
+ If LDB_FLG_NOSYNC is used in ldb_connect, then the database will be
+ opened without synchronous operations, if possible.
+*/
#define LDB_FLG_NOSYNC 2
+/*! \cond DOXYGEN_IGNORE */
#ifndef PRINTF_ATTRIBUTE
#define PRINTF_ATTRIBUTE(a,b)
#endif
+/*! \endcond */
-/* structures for ldb_parse_tree handling code */
+/*
+ structures for ldb_parse_tree handling code
+*/
enum ldb_parse_op { LDB_OP_AND=1, LDB_OP_OR=2, LDB_OP_NOT=3,
LDB_OP_EQUALITY=4, LDB_OP_SUBSTRING=5,
LDB_OP_GREATER=6, LDB_OP_LESS=7, LDB_OP_PRESENT=8,
@@ -235,24 +304,106 @@ struct ldb_attrib_handler {
ldb_attr_comparison_t comparison_fn;
};
-#define LDB_ATTR_FLAG_HIDDEN (1<<0) /* the attribute is not returned by default */
-#define LDB_ATTR_FLAG_CONSTRUCTED (1<<1) /* the attribute is constructed from other attributes */
+/**
+ The attribute is not returned by default
+*/
+#define LDB_ATTR_FLAG_HIDDEN (1<<0)
+/**
+ The attribute is constructed from other attributes
+*/
+#define LDB_ATTR_FLAG_CONSTRUCTED (1<<1)
+
+/**
+ LDAP attribute syntax for a DN
+
+ This is the well-known LDAP attribute syntax for a DN.
-/* well-known ldap attribute syntaxes - see rfc2252 section 4.3.2 */
+ See <a href="http://www.ietf.org/rfc/rfc2252.txt">RFC 2252</a>, Section 4.3.2
+*/
#define LDB_SYNTAX_DN "1.3.6.1.4.1.1466.115.121.1.12"
+
+/**
+ LDAP attribute syntax for a Directory String
+
+ This is the well-known LDAP attribute syntax for a Directory String.
+
+ See <a href="http://www.ietf.org/rfc/rfc2252.txt">RFC 2252</a>, Section 4.3.2
+*/
#define LDB_SYNTAX_DIRECTORY_STRING "1.3.6.1.4.1.1466.115.121.1.15"
+
+/**
+ LDAP attribute syntax for an integer
+
+ This is the well-known LDAP attribute syntax for an integer.
+
+ See <a href="http://www.ietf.org/rfc/rfc2252.txt">RFC 2252</a>, Section 4.3.2
+*/
#define LDB_SYNTAX_INTEGER "1.3.6.1.4.1.1466.115.121.1.27"
+
+/**
+ LDAP attribute syntax for an octet string
+
+ This is the well-known LDAP attribute syntax for an octet string.
+
+ See <a href="http://www.ietf.org/rfc/rfc2252.txt">RFC 2252</a>, Section 4.3.2
+*/
#define LDB_SYNTAX_OCTET_STRING "1.3.6.1.4.1.1466.115.121.1.40"
+
+/**
+ LDAP attribute syntax for UTC time.
+
+ This is the well-known LDAP attribute syntax for a UTC time.
+
+ See <a href="http://www.ietf.org/rfc/rfc2252.txt">RFC 2252</a>, Section 4.3.2
+*/
#define LDB_SYNTAX_UTC_TIME "1.3.6.1.4.1.1466.115.121.1.53"
+
#define LDB_SYNTAX_OBJECTCLASS "LDB_SYNTAX_OBJECTCLASS"
/* sorting helpers */
typedef int (*ldb_qsort_cmp_fn_t) (const void *, const void *, const void *);
+/**
+ OID for the paged results control. This control is included in the
+ searchRequest and searchResultDone messages as part of the controls
+ field of the LDAPMessage, as defined in Section 4.1.12 of
+ LDAP v3.
+
+ \sa <a href="http://www.ietf.org/rfc/rfc2696.txt">RFC 2696</a>.
+*/
#define LDB_CONTROL_PAGED_RESULTS_OID "1.2.840.113556.1.4.319"
+
+/**
+ OID for extended DN
+
+ \sa <a href="http://msdn.microsoft.com/library/default.asp?url=/library/en-us/ldap/ldap/ldap_server_extended_dn_oid.asp">Microsoft documentation of this OID</a>
+*/
#define LDB_CONTROL_EXTENDED_DN_OID "1.2.840.113556.1.4.529"
+
+/**
+ OID for LDAP server sort result extension.
+
+ This control is included in the searchRequest message as part of
+ the controls field of the LDAPMessage, as defined in Section 4.1.12
+ of LDAP v3. The controlType is set to
+ "1.2.840.113556.1.4.473". The criticality MAY be either TRUE or
+ FALSE (where absent is also equivalent to FALSE) at the client's
+ option.
+
+ \sa <a href="http://www.ietf.org/rfc/rfc2891.txt">RFC 2891</a>.
+*/
#define LDB_CONTROL_SERVER_SORT_OID "1.2.840.113556.1.4.473"
+
+/**
+ OID for LDAP server sort result response extension.
+
+ This control is included in the searchResultDone message as part of
+ the controls field of the LDAPMessage, as defined in Section 4.1.12 of
+ LDAP v3.
+
+ \sa <a href="http://www.ietf.org/rfc/rfc2891.txt">RFC 2891</a>.
+*/
#define LDB_CONTROL_SORT_RESP_OID "1.2.840.113556.1.4.474"
struct ldb_paged_control {
@@ -347,29 +498,60 @@ struct ldb_request {
int ldb_request(struct ldb_context *ldb, struct ldb_request *request);
-/*
- initialise a ldb context
+/**
+ Initialise an ldb context
+
+ This is required before any other LDB call.
+
+ \param mem_ctx pointer to a talloc memory context. Pass NULL if there is
+ no suitable context available.
+
+ \return pointer to ldb_context that should be free'd (using talloc_free())
+ at the end of the program.
*/
struct ldb_context *ldb_init(void *mem_ctx);
-/*
- connect to a database. The URL can either be one of the following forms
- ldb://path
- ldapi://path
+/**
+ Connect to a database.
+
+ This is typically called soon after ldb_init(), and is required prior to
+ any search or database modification operations.
+
+ The URL can be one of the following forms:
+ - tdb://path
+ - ldapi://path
+ - ldap://host
+ - sqlite3://path
- flags is made up of LDB_FLG_*
+ \param ldb the context associated with the database (from ldb_init())
+ \param url the URL of the database to connect to, as noted above
+ \param flags a combination of LDB_FLG_* to modify the connection behaviour
+ \param options backend specific options - passed uninterpreted to the backend
- the options are passed uninterpreted to the backend, and are
- backend specific
+ \return result code (LDB_SUCCESS on success, or a failure code)
+
+ \note It is an error to connect to a database that does not exist in readonly mode
+ (that is, with LDB_FLG_RDONLY). However in read-write mode, the database will be
+ created if it does not exist.
*/
int ldb_connect(struct ldb_context *ldb, const char *url, unsigned int flags, const char *options[]);
-/*
- search the database given a LDAP-like search expression
+/**
+ Search the database
+
+ This function searches the database, and returns
+ records that match an LDAP-like search expression
- return the number of records found, or -1 on error
+ \param ldb the context associated with the database (from ldb_init())
+ \param base the Base Distinguished Name for the query (pass NULL for root DN)
+ \param scope the search scope for the query
+ \param expression the search expression to use for this query
+ \param attrs the search attributes for the query (pass NULL if none required)
+ \param res the return result
- use talloc_free to free the ldb_message returned
+ \return result code (LDB_SUCCESS on success, or a failure code)
+
+ \note use talloc_free() to free the ldb_result returned
*/
int ldb_search(struct ldb_context *ldb,
const struct ldb_dn *base,
@@ -386,71 +568,263 @@ int ldb_search_bytree(struct ldb_context *ldb,
struct ldb_parse_tree *tree,
const char * const *attrs, struct ldb_result **res);
-/*
- add a record to the database. Will fail if a record with the given class and key
- already exists
+/**
+ Add a record to the database.
+
+ This function adds a record to the database. This function will fail
+ if a record with the specified class and key already exists in the
+ database.
+
+ \param ldb the context associated with the database (from
+ ldb_init())
+ \param message the message containing the record to add.
+
+ \return result code (LDB_SUCCESS if the record was added, otherwise
+ a failure code)
*/
int ldb_add(struct ldb_context *ldb,
const struct ldb_message *message);
-/*
- modify the specified attributes of a record
+/**
+ Modify the specified attributes of a record
+
+ This function modifies a record that is in the database.
+
+ \param ldb the context associated with the database (from
+ ldb_init())
+ \param message the message containing the changes required.
+
+ \return result code (LDB_SUCCESS if the record was modified as
+ requested, otherwise a failure code)
*/
int ldb_modify(struct ldb_context *ldb,
const struct ldb_message *message);
-/*
- rename a record in the database
+/**
+ Rename a record in the database
+
+ This function renames a record in the database.
+
+ \param ldb the context associated with the database (from
+ ldb_init())
+ \param olddn the DN for the record to be renamed.
+ \param newdn the new DN
+
+ \return result code (LDB_SUCCESS if the record was renamed as
+ requested, otherwise a failure code)
*/
int ldb_rename(struct ldb_context *ldb, const struct ldb_dn *olddn, const struct ldb_dn *newdn);
-/*
- delete a record from the database
+/**
+ Delete a record from the database
+
+ This function deletes a record from the database.
+
+ \param ldb the context associated with the database (from
+ ldb_init())
+ \param dn the DN for the record to be deleted.
+
+ \return result code (LDB_SUCCESS if the record was deleted,
+ otherwise a failure code)
*/
int ldb_delete(struct ldb_context *ldb, const struct ldb_dn *dn);
-/*
+/**
start a transaction
*/
int ldb_transaction_start(struct ldb_context *ldb);
-/*
+/**
commit a transaction
*/
int ldb_transaction_commit(struct ldb_context *ldb);
-/*
+/**
cancel a transaction
*/
int ldb_transaction_cancel(struct ldb_context *ldb);
-/*
+/**
return extended error information from the last call
*/
const char *ldb_errstring(struct ldb_context *ldb);
-/*
- casefold a string (should be UTF8, but at the moment it isn't)
+/**
+ Casefold a string
+
+ \param mem_ctx the memory context to allocate the result string
+ memory from.
+ \param s the string that is to be folded
+ \return a copy of the string, converted to upper case
+
+ \todo This function should be UTF8 aware, but currently is not.
*/
char *ldb_casefold(void *mem_ctx, const char *s);
+
+/**
+ Compare two strings, without regard to case.
+
+ \param s1 the first string to compare
+ \param s2 the second string to compare
+
+ \return 0 if the strings are the same, non-zero if there are any
+ differences except for case.
+
+ \note This function is not UTF8 aware.
+*/
int ldb_caseless_cmp(const char *s1, const char *s2);
/*
ldif manipulation functions
*/
+/**
+ Write an LDIF message
+
+ This function writes an LDIF message using a caller supplied write
+ function.
+
+ \param ldb the ldb context (from ldb_init())
+ \param fprintf_fn a function pointer for the write function. This must take
+ a private data pointer, followed by a format string, and then a variable argument
+ list.
+ \param private_data pointer that will be provided back to the write
+ function. This is useful for maintaining state or context.
+ \param ldif the message to write out
+
+ \return the total number of bytes written, or an error code as returned
+ from the write function.
+
+ \sa ldb_ldif_write_file for a more convenient way to write to a
+ file stream.
+
+ \sa ldb_ldif_read for the reader equivalent to this function.
+*/
int ldb_ldif_write(struct ldb_context *ldb,
int (*fprintf_fn)(void *, const char *, ...),
void *private_data,
const struct ldb_ldif *ldif);
-void ldb_ldif_read_free(struct ldb_context *ldb, struct ldb_ldif *);
+
+/**
+ Clean up an LDIF message
+
+ This function cleans up a LDIF message read using ldb_ldif_read()
+ or related functions (such as ldb_ldif_read_string() and
+ ldb_ldif_read_file().
+
+ \param ldb the ldb context (from ldb_init())
+ \param msg the message to clean up and free
+
+*/
+void ldb_ldif_read_free(struct ldb_context *ldb, struct ldb_ldif *msg);
+
+/**
+ Read an LDIF message
+
+ This function creates an LDIF message using a caller supplied read
+ function.
+
+ \param ldb the ldb context (from ldb_init())
+ \param fgetc_fn a function pointer for the read function. This must
+ take a private data pointer, and must return a pointer to an
+ integer corresponding to the next byte read (or EOF if there is no
+ more data to be read).
+ \param private_data pointer that will be provided back to the read
+ function. This is udeful for maintaining state or context.
+
+ \return the LDIF message that has been read in
+
+ \note You must free the LDIF message when no longer required, using
+ ldb_ldif_read_free().
+
+ \sa ldb_ldif_read_file for a more convenient way to read from a
+ file stream.
+
+ \sa ldb_ldif_read_string for a more convenient way to read from a
+ string (char array).
+
+ \sa ldb_ldif_write for the writer equivalent to this function.
+*/
struct ldb_ldif *ldb_ldif_read(struct ldb_context *ldb,
int (*fgetc_fn)(void *), void *private_data);
+
+/**
+ Read an LDIF message from a file
+
+ This function reads the next LDIF message from the contents of a
+ file stream. If you want to get all of the LDIF messages, you will
+ need to repeatedly call this function, until it returns NULL.
+
+ \param ldb the ldb context (from ldb_init())
+ \param f the file stream to read from (typically from fdopen())
+
+ \sa ldb_ldif_read_string for an equivalent function that will read
+ from a string (char array).
+
+ \sa ldb_ldif_write_file for the writer equivalent to this function.
+
+*/
struct ldb_ldif *ldb_ldif_read_file(struct ldb_context *ldb, FILE *f);
+
+/**
+ Read an LDIF message from a string
+
+ This function reads the next LDIF message from the contents of a char
+ array. If you want to get all of the LDIF messages, you will need
+ to repeatedly call this function, until it returns NULL.
+
+ \param ldb the ldb context (from ldb_init())
+ \param s pointer to the char array to read from
+
+ \sa ldb_ldif_read_file for an equivalent function that will read
+ from a file stream.
+
+ \sa ldb_ldif_write for a more general (arbitrary read function)
+ version of this function.
+*/
struct ldb_ldif *ldb_ldif_read_string(struct ldb_context *ldb, const char **s);
+
+/**
+ Write an LDIF message to a file
+
+ \param ldb the ldb context (from ldb_init())
+ \param f the file stream to write to (typically from fdopen())
+ \param msg the message to write out
+
+ \return the total number of bytes written, or a negative error code
+
+ \sa ldb_ldif_read_file for the reader equivalent to this function.
+*/
int ldb_ldif_write_file(struct ldb_context *ldb, FILE *f, const struct ldb_ldif *msg);
+
+/**
+ Base64 encode a buffer
+
+ \param mem_ctx the memory context that the result is allocated
+ from.
+ \param buf pointer to the array that is to be encoded
+ \param len the number of elements in the array to be encoded
+
+ \return pointer to an array containing the encoded data
+
+ \note The caller is responsible for freeing the result
+*/
char *ldb_base64_encode(void *mem_ctx, const char *buf, int len);
+
+/**
+ Base64 decode a buffer
+
+ This function decodes a base64 encoded string in place.
+
+ \param s the string to decode.
+
+ \return the length of the returned (decoded) string.
+
+ \note the string is null terminated, but the null terminator is not
+ included in the length.
+*/
int ldb_base64_decode(char *s);
+
int ldb_attrib_add_handlers(struct ldb_context *ldb,
const struct ldb_attrib_handler *handlers,
unsigned num_handlers);
@@ -486,28 +860,67 @@ struct ldb_dn_component *ldb_dn_get_rdn(void *mem_ctx, const struct ldb_dn *dn);
/* useful functions for ldb_message structure manipulation */
int ldb_dn_cmp(struct ldb_context *ldb, const char *dn1, const char *dn2);
+
+/**
+ Compare two attributes
+
+ This function compares to attribute names. Note that this is a
+ case-insensitive comparison.
+
+ \param attr1 the first attribute name to compare
+ \param attr2 the second attribute name to compare
+
+ \return 0 if the attribute names are the same, or only differ in
+ case; non-zero if there are any differences
+*/
int ldb_attr_cmp(const char *attr1, const char *attr2);
int ldb_attr_dn(const char *attr);
char *ldb_dn_escape_value(void *mem_ctx, struct ldb_val value);
-/* create an empty message */
+/**
+ Create an empty message
+
+ \param mem_ctx the memory context to create in. You can pass NULL
+ to get the top level context, however the ldb context (from
+ ldb_init()) may be a better choice
+*/
struct ldb_message *ldb_msg_new(void *mem_ctx);
-/* find an element within an message */
+/**
+ Find an element within an message
+*/
struct ldb_message_element *ldb_msg_find_element(const struct ldb_message *msg,
const char *attr_name);
-/* compare two ldb_val values - return 0 on match */
+/**
+ Compare two ldb_val values
+
+ \param v1 first ldb_val structure to be tested
+ \param v2 second ldb_val structure to be tested
+
+ \return 1 for a match, 0 if there is any difference
+*/
int ldb_val_equal_exact(const struct ldb_val *v1, const struct ldb_val *v2);
-/* find a value within an ldb_message_element */
+/**
+ find a value within an ldb_message_element
+
+ \param el the element to search
+ \param val the value to search for
+
+ \note This search is case sensitive
+*/
struct ldb_val *ldb_msg_find_val(const struct ldb_message_element *el,
struct ldb_val *val);
-/* add a new empty element to a ldb_message */
+/**
+ add a new empty element to a ldb_message
+*/
int ldb_msg_add_empty(struct ldb_message *msg, const char *attr_name, int flags);
-/* add a element to a ldb_message */
+/**
+ add a element to a ldb_message
+*/
int ldb_msg_add(struct ldb_message *msg,
const struct ldb_message_element *el,
int flags);
@@ -519,13 +932,19 @@ int ldb_msg_add_string(struct ldb_message *msg,
int ldb_msg_add_fmt(struct ldb_message *msg,
const char *attr_name, const char *fmt, ...) PRINTF_ATTRIBUTE(3,4);
-/* compare two message elements - return 0 on match */
+/**
+ compare two message elements - return 0 on match
+*/
int ldb_msg_element_compare(struct ldb_message_element *el1,
struct ldb_message_element *el2);
-/* find elements in a message and convert to a specific type, with
+/**
+ Find elements in a message.
+
+ This function finds elements and converts to a specific type, with
a give default value if not found. Assumes that elements are
- single valued */
+ single valued.
+*/
const struct ldb_val *ldb_msg_find_ldb_val(const struct ldb_message *msg, const char *attr_name);
int ldb_msg_find_int(const struct ldb_message *msg,
const char *attr_name,
@@ -561,11 +980,35 @@ struct ldb_message *ldb_msg_diff(struct ldb_context *ldb,
struct ldb_message *msg1,
struct ldb_message *msg2);
+/**
+ Integrity check an ldb_message
+
+ This function performs basic sanity / integrity checks on an
+ ldb_message.
+
+ \param msg the message to check
+
+ \return LDB_SUCCESS if the message is OK, or a non-zero error code
+ (one of LDB_ERR_INVALID_DN_SYNTAX, LDB_ERR_ENTRY_ALREADY_EXISTS or
+ LDB_ERR_INVALID_ATTRIBUTE_SYNTAX) if there is a problem with a
+ message.
+*/
int ldb_msg_sanity_check(const struct ldb_message *msg);
+/**
+ Duplicate an ldb_val structure
+
+ This function copies an ldb value structure.
+
+ \param mem_ctx the memory context that the duplicated value will be
+ allocated from
+ \param v the ldb_val to be duplicated.
+
+ \return the duplicated ldb_val structure.
+*/
struct ldb_val ldb_val_dup(void *mem_ctx, const struct ldb_val *v);
-/*
+/**
this allows the user to set a debug function for error reporting
*/
int ldb_set_debug(struct ldb_context *ldb,
@@ -573,7 +1016,9 @@ int ldb_set_debug(struct ldb_context *ldb,
const char *fmt, va_list ap),
void *context);
-/* this sets up debug to print messages on stderr */
+/**
+ this sets up debug to print messages on stderr
+*/
int ldb_set_debug_stderr(struct ldb_context *ldb);
/* control backend specific opaque values */
@@ -596,7 +1041,30 @@ int ldb_msg_rename_attr(struct ldb_message *msg, const char *attr, const char *r
int ldb_msg_copy_attr(struct ldb_message *msg, const char *attr, const char *replace);
void ldb_msg_remove_attr(struct ldb_message *msg, const char *attr);
+/**
+ Convert a time structure to a string
+
+ This function converts a time_t structure to an LDAP formatted time
+ string.
+
+ \param mem_ctx the memory context to allocate the return string in
+ \param t the time structure to convert
+
+ \return the formatted string, or NULL if the time structure could
+ not be converted
+*/
char *ldb_timestring(void *mem_ctx, time_t t);
+
+/**
+ Convert a string to a time structure
+
+ This function converts an LDAP formatted time string to a time_t
+ structure.
+
+ \param s the string to convert
+
+ \return the time structure, or 0 if the string cannot be converted
+*/
time_t ldb_string_to_time(const char *s);
char *ldb_dn_canonical_string(void *mem_ctx, const struct ldb_dn *dn);
diff --git a/source4/lib/ldb/include/ldb_errors.h b/source4/lib/ldb/include/ldb_errors.h
index a93d3cd388..dbc6d16e2a 100644
--- a/source4/lib/ldb/include/ldb_errors.h
+++ b/source4/lib/ldb/include/ldb_errors.h
@@ -33,59 +33,279 @@
*/
#ifndef _LDB_ERRORS_H_
+
+/*! \cond DOXYGEN_IGNORE */
#define _LDB_ERRORS_H_ 1
+/*! \endcond */
-/*
- * Not all error codes make sense for ldb,
- * but they are keept here for reference anyway
+/**
+ \file ldb_errors.h
+
+ This header provides a set of result codes for LDB function calls.
+
+ Many LDB function calls return an integer value (int). As shown in
+ the function documentation, those return values may indicate
+ whether the function call worked correctly (in which case it
+ returns LDB_SUCCESS) or some problem occurred (in which case some
+ other value will be returned). As a special case,
+ LDB_ERR_COMPARE_FALSE or LDB_ERR_COMPARE_TRUE may be returned,
+ which does not indicate an error.
+
+ \note Not all error codes make sense for LDB, however they are
+ based on the LDAP error codes, and are kept for reference and to
+ avoid overlap.
+
+ \note Some of this documentation is based on information in
+ the OpenLDAP documentation, as developed and maintained by the
+ <a href="http://www.openldap.org/">The OpenLDAP Project</a>.
*/
+/**
+ The function call succeeded.
+
+ If a function returns LDB_SUCCESS, then that function, and the
+ underlying transactions that may have been required, completed
+ successfully.
+*/
#define LDB_SUCCESS 0
+
+/**
+ The function call failed for some non-specific reason.
+*/
#define LDB_ERR_OPERATIONS_ERROR 1
+
+/**
+ The function call failed because of a protocol violation.
+*/
#define LDB_ERR_PROTOCOL_ERROR 2
+
+/**
+ The function call failed because a time limit was exceeded.
+*/
#define LDB_ERR_TIME_LIMIT_EXCEEDED 3
+
+/**
+ The function call failed because a size limit was exceeded.
+*/
#define LDB_ERR_SIZE_LIMIT_EXCEEDED 4
+
+/**
+ The function was for value comparison, and the comparison operation
+ returned false.
+
+ \note This is a status value, and doesn't normally indicate an
+ error.
+*/
#define LDB_ERR_COMPARE_FALSE 5
+
+/**
+ The function was for value comparison, and the comparison operation
+ returned true.
+
+ \note This is a status value, and doesn't normally indicate an
+ error.
+*/
#define LDB_ERR_COMPARE_TRUE 6
+
+/**
+ The function used an authentication method that is not supported by
+ the database.
+*/
#define LDB_ERR_AUTH_METHOD_NOT_SUPPORTED 7
+
+/**
+ The function call required a underlying operation that required
+ strong authentication.
+
+ This will normally only occur if you are using LDB with a LDAP
+ backend.
+*/
#define LDB_ERR_STRONG_AUTH_REQUIRED 8
/* 9 RESERVED */
+
+/**
+ The function resulted in a referral to another server.
+*/
#define LDB_ERR_REFERRAL 10
+
+/**
+ The function failed because an administrative / policy limit was
+ exceeded.
+*/
#define LDB_ERR_ADMIN_LIMIT_EXCEEDED 11
+
+/**
+ The function required an extension or capability that the
+ database cannot provide.
+*/
#define LDB_ERR_UNSUPPORTED_CRITICAL_EXTENSION 12
+
+/**
+ The function involved a transaction or database operation that
+ could not be performed without a secure link.
+*/
#define LDB_ERR_CONFIDENTIALITY_REQUIRED 13
+
+/**
+ This is an intermediate result code for SASL bind operations that
+ have more than one step.
+
+ \note This is a result code that does not normally indicate an
+ error has occurred.
+*/
#define LDB_ERR_SASL_BIND_IN_PROGRESS 14
+
+/**
+ The function referred to an attribute type that is not present in
+ the entry.
+*/
#define LDB_ERR_NO_SUCH_ATTRIBUTE 16
+
+/**
+ The function referred to an attribute type that is invalid
+*/
#define LDB_ERR_UNDEFINED_ATTRIBUTE_TYPE 17
+
+/**
+ The function required a filter type that is not available for the
+ specified attribute.
+*/
#define LDB_ERR_INAPPROPRIATE_MATCHING 18
-#define LDB_ERR_CONSTRAINT_VIOLAION 19
+
+/**
+ The function would have violated an attribute constraint.
+*/
+#define LDB_ERR_CONSTRAINT_VIOLATION 19
+
+/**
+ The function involved an attribute type or attribute value that
+ already exists in the entry.
+*/
#define LDB_ERR_ATTRIBUTE_OR_VALUE_EXISTS 20
+/**
+ The function used an invalid (incorrect syntax) attribute value.
+*/
#define LDB_ERR_INVALID_ATTRIBUTE_SYNTAX 21
+
/* 22-31 unused */
+
+/**
+ The function referred to an object that does not exist in the
+ database.
+*/
#define LDB_ERR_NO_SUCH_OBJECT 32
+
+/**
+ The function referred to an alias which points to a non-existant
+ object in the database.
+*/
#define LDB_ERR_ALIAS_PROBLEM 33
+
+/**
+ The function used a DN which was invalid (incorrect syntax).
+*/
#define LDB_ERR_INVALID_DN_SYNTAX 34
+
/* 53 RESERVED */
+
+/**
+ The function required dereferencing of an alias, and something went
+ wrong during the dereferencing process.
+*/
#define LDB_ERR_ALIAS_DEREFERENCING_PROBLEM 36
+
/* 37-47 unused */
+
+/**
+ The function passed in the wrong authentication method.
+*/
#define LDB_ERR_INAPPROPRIATE_AUTHENTICATION 48
+
+/**
+ The function passed in or referenced incorrect credentials during
+ authentication.
+*/
#define LDB_ERR_INVALID_CREDENTIALS 49
+
+/**
+ The function required access permissions that the user does not
+ possess.
+*/
#define LDB_ERR_INSUFFICIENT_ACCESS_RIGHTS 50
+
+/**
+ The function required a transaction or call that the database could
+ not perform because it is busy.
+*/
#define LDB_ERR_BUSY 51
+
+/**
+ The function required a transaction or call to a database that is
+ not available.
+*/
#define LDB_ERR_UNAVAILABLE 52
+
+/**
+ The function required a transaction or call to a database that the
+ database declined to perform.
+*/
#define LDB_ERR_UNWILLING_TO_PERFORM 53
+
+/**
+ The function failed because it resulted in a loop being detected.
+*/
#define LDB_ERR_LOOP_DETECT 54
+
/* 55-63 unused */
+
+/**
+ The function failed because it would have violated a naming rule.
+*/
#define LDB_ERR_NAMING_VIOLATION 64
+
+/**
+ The function failed because it would have violated the schema.
+*/
#define LDB_ERR_OBJECT_CLASS_VIOLATION 65
+
+/**
+ The function required an operation that is only allowed on leaf
+ objects, but the object is not a leaf.
+*/
#define LDB_ERR_NOT_ALLOWED_ON_NON_LEAF 66
+
+/**
+ The function required an operation that cannot be performed on a
+ Relative DN, but the object is a Relative DN.
+*/
#define LDB_ERR_NOT_ALLOWED_ON_RDN 67
+
+/**
+ The function failed because the entry already exists.
+*/
#define LDB_ERR_ENTRY_ALREADY_EXISTS 68
+
+/**
+ The function failed because modifications to an object class are
+ not allowable.
+*/
#define LDB_ERR_OBJECT_CLASS_MODS_PROHIBITED 69
+
/* 70 RESERVED FOR CLDAP */
+
+/**
+ The function failed because it needed to be applied to multiple
+ databases.
+*/
#define LDB_ERR_AFFECTS_MULTIPLE_DSAS 71
+
/* 72-79 unused */
+
+/**
+ The function failed for unknown reasons.
+*/
#define LDB_ERR_OTHER 80
+
/* 81-90 RESERVED for APIs */
#endif /* _LDB_ERRORS_H_ */
diff --git a/source4/lib/ldb/mainpage.dox b/source4/lib/ldb/mainpage.dox
new file mode 100644
index 0000000000..bbd8d9c502
--- /dev/null
+++ b/source4/lib/ldb/mainpage.dox
@@ -0,0 +1,80 @@
+/**
+
+\mainpage ldb
+
+\section Overview
+
+ldb is a LDAP-like embedded database. It is not at all LDAP standards
+compliant, so if you want a standards compliant database then please
+see the excellent <a href="http://www.openldap.org/">OpenLDAP</a>
+project.<p>
+
+What ldb does is provide a fast database with an LDAP-like API
+designed to be used within an application. In some ways it can be seen
+as a intermediate solution between key-value pair databases and a real
+LDAP database.<p>
+
+ldb is the database engine used in Samba4.
+
+\section Features
+
+The main features that separate ldb from other solutions are:
+ - Safe multi-reader, multi-writer, using byte range locking
+ - LDAP-like API
+ - fast operation
+ - choice of local tdb, local sqlite3 or remote LDAP backends
+ - integration with <a href="http://talloc.samba.org">talloc</a>
+ - schema-less operation, for trivial setup
+ - modules for extensions (such as schema support)
+ - easy setup of indexes and attribute properties
+ - ldbedit tool for database editing (reminiscent of 'vipw')
+ - ldif for import/export
+
+\section Documentation
+
+ldb has limited programmer and administrator documentation:
+ - a list of <a href="globals_func.html">functions</a>
+ - a list of <a href="examples.html">examples</a>
+ - a list of <a href="annotated.html">data structures</a>
+ - a list of <a href="globals_defs.html">constants</a>
+
+If you need more information than is presented in this document, you
+may wish to look at the source code, especially the source code in the
+<a href="http://samba.org/ftp/unpacked/samba4/source/lib/ldb/tools/">tools directory</a>.
+
+ldb makes use of the LDAP Data Interchange Format (LDIF), which is
+documented in <a href="http://www.ietf.org/rfc/rfc2849.txt">RFC
+2849</a>.
+
+\section Support
+
+ldb does not currently have its own mailing list or bug tracking
+system. For now, please use the <a
+href="https://lists.samba.org/mailman/listinfo/samba-technical">samba-technical</a>
+mailing list, and the <a href="http://bugzilla.samba.org/">Samba
+bugzilla</a> bug tracking system.
+
+\section Download
+
+You can download the latest release either via rsync or anonymous
+svn. To fetch via svn use the following commands:
+
+\verbatim
+ svn co svn://svnanon.samba.org/samba/branches/SAMBA_4_0/source/lib/ldb ldb
+ svn co svn://svnanon.samba.org/samba/branches/SAMBA_4_0/source/lib/tdb tdb
+ svn co svn://svnanon.samba.org/samba/branches/SAMBA_4_0/source/lib/talloc talloc
+\endverbatim
+
+To fetch via rsync use these commands:
+
+\verbatim
+ rsync -Pavz samba.org::ftp/unpacked/samba4/source/lib/ldb .
+ rsync -Pavz samba.org::ftp/unpacked/samba4/source/lib/tdb .
+ rsync -Pavz samba.org::ftp/unpacked/samba4/source/lib/talloc .
+\endverbatim
+
+\section Credits
+
+ldb is another product of the prolific <a href="http://samba.org/~tridge/">Andrew Tridgell</a>.
+
+*/