diff options
Diffstat (limited to 'docs/Samba-Guide/SBE-SecureOfficeServer.xml')
| -rw-r--r-- | docs/Samba-Guide/SBE-SecureOfficeServer.xml | 181 |
1 files changed, 92 insertions, 89 deletions
diff --git a/docs/Samba-Guide/SBE-SecureOfficeServer.xml b/docs/Samba-Guide/SBE-SecureOfficeServer.xml index 3dcbba4cd3..fb8562f577 100644 --- a/docs/Samba-Guide/SBE-SecureOfficeServer.xml +++ b/docs/Samba-Guide/SBE-SecureOfficeServer.xml @@ -821,6 +821,7 @@ echo -e "\nNAT firewall done.\n" <smbconfoption name="bind interfaces only">Yes</smbconfoption> <smbconfoption name="passdb backend">tdbsam</smbconfoption> <smbconfoption name="pam password change">Yes</smbconfoption> +<smbconfoption name="passwd program">/usr/bin/passwd %u</smbconfoption> <smbconfoption name="passwd chat"></smbconfoption> <member><parameter>*New*Password* %n\n *Re-enter*new*password*%n\n *Password*changed*</parameter></member> <smbconfoption name="username map">/etc/samba/smbusers</smbconfoption> @@ -2207,14 +2208,15 @@ Nmap run completed -- 1 IP address (1 host up) scanned in 168 seconds be done with notebook computers as long as they are identical or sufficiently similar. </para> - <procedure> + <procedure id="sbewinclntprep"> + <title>Windows Client Configuration Procedure</title> + <step><para> - Install MS Windows XP Professional. During installation, configure the client to use DHCP for - TCP/IP protocol configuration. <indexterm><primary>WINS</primary></indexterm> <indexterm><primary>DHCP</primary></indexterm> - DHCP configures all Windows clients to use the WINS Server address that has been defined - for the local subnet. + Install MS Windows XP Professional. During installation, configure the client to use DHCP for + TCP/IP protocol configuration. DHCP configures all Windows clients to use the WINS Server + address that has been defined for the local subnet. </para></step> <step><para> @@ -2229,8 +2231,8 @@ Nmap run completed -- 1 IP address (1 host up) scanned in 168 seconds <step><para> Verify <constant>DIAMOND</constant> is visible in <guimenu>My Network Places</guimenu>, that it is possible to connect to it and see the shares <guimenuitem>accounts</guimenuitem>, - <guimenuitem>apps</guimenuitem>, and <guimenuitem>finsvcs</guimenuitem>, - and that it is possible to open each share to reveal its contents. + <guimenuitem>apps</guimenuitem>, and <guimenuitem>finsvcs</guimenuitem>, and that it is + possible to open each share to reveal its contents. </para></step> <step><para> @@ -2253,94 +2255,95 @@ Nmap run completed -- 1 IP address (1 host up) scanned in 168 seconds Now install all four printers onto the staging system. The printers you install include the accounting department HP LaserJet 6 and Minolta QMS Magicolor printers. You will also configure identical printers that are located in the financial services department. - Install printers on each machine using the following steps: - </para> + Install printers on each machine using the steps shown in <link linkend="sbewinclntptrprep"/>. + </para></step> - <procedure> - <step><para> - Click <menuchoice> - <guimenu>Start</guimenu> - <guimenuitem>Settings</guimenuitem> - <guimenuitem>Printers</guimenuitem> - <guiicon>Add Printer</guiicon> - <guibutton>Next</guibutton> - </menuchoice>. Do not click <guimenuitem>Network printer</guimenuitem>. - Ensure that <guimenuitem>Local printer</guimenuitem> is selected. - </para></step> - - <step><para> - Click <guibutton>Next</guibutton>. In the - <guimenuitem>Manufacturer:</guimenuitem> panel, select <constant>HP</constant>. - In the <guimenuitem>Printers:</guimenuitem> panel, select the printer called - <constant>HP LaserJet 6</constant>. Click <guibutton>Next</guibutton>. - </para></step> - - <step><para> - In the <guimenuitem>Available ports:</guimenuitem> panel, select - <constant>FILE:</constant>. Accept the default printer name by clicking - <guibutton>Next</guibutton>. When asked, <quote>Would you like to print a - test page?,</quote> click <guimenuitem>No</guimenuitem>. Click - <guibutton>Finish</guibutton>. - </para></step> - - <step><para> - You may be prompted for the name of a file to print to. If so, close the - dialog panel. Right-click <menuchoice> - <guiicon>HP LaserJet 6</guiicon> - <guimenuitem>Properties</guimenuitem> - <guisubmenu>Details (Tab)</guisubmenu> - <guimenuitem>Add Port</guimenuitem> - </menuchoice>. - </para></step> - - <step><para> - In the <guimenuitem>Network</guimenuitem> panel, enter the name of - the print queue on the Samba server as follows: <constant>\\DIAMOND\hplj6a</constant>. - Click <menuchoice> - <guibutton>OK</guibutton> - <guibutton>OK</guibutton> - </menuchoice> to complete the installation. - </para></step> - - <step><para> - Repeat the printer installation steps above for both HP LaserJet 6 printers - as well as for both QMS Magicolor laser printers. - </para></step> - </procedure> - </step> + <step><para> + <indexterm><primary>defragmentation</primary></indexterm> + When you are satisfied that the staging systems are complete, use the appropriate procedure to + remove the client from the domain. Reboot the system and then log on as the local administrator + and clean out all temporary files stored on the system. Before shutting down, use the disk + defragmentation tool so that the file system is in optimal condition before replication. + </para></step> - <step><para> - <indexterm><primary>defragmentation</primary></indexterm> - When you are satisfied that the staging systems are complete, use the appropriate procedure to - remove the client from the domain. Reboot the system and then log on as the local administrator - and clean out all temporary files stored on the system. Before shutting down, use the disk - defragmentation tool so that the file system is in optimal condition before replication. - </para></step> + <step><para> + Boot the workstation using the Norton (Symantec) Ghosting diskette (or CD-ROM) and image the + machine to a network share on the server. + </para></step> - <step><para> - Boot the workstation using the Norton (Symantec) Ghosting diskette (or CD-ROM) and image the - machine to a network share on the server. - </para></step> + <step><para> + <indexterm><primary>Windows security identifier</primary><see>SID</see></indexterm> + <indexterm><primary>SID</primary></indexterm> + You may now replicate the image to the target machines using the appropriate Norton Ghost + procedure. Make sure to use the procedure that ensures each machine has a unique + Windows security identifier (SID). When the installation of the disk image has completed, boot the PC. + </para></step> - <step><para> - <indexterm><primary>Windows security identifier</primary><see>SID</see></indexterm> - <indexterm><primary>SID</primary></indexterm> - You may now replicate the image to the target machines using the appropriate Norton Ghost - procedure. Make sure to use the procedure that ensures each machine has a unique - Windows security identifier (SID). When the installation of the disk image has completed, boot the PC. - </para></step> + <step><para> + Log onto the machine as the local Administrator (the only option), and join the machine to + the Domain, following the procedure set out in Appendix A, <link linkend="domjoin"/>. The system is now + ready for the user to log on, provided you have created a network logon account for that + user, of course. + </para></step> - <step><para> - Log onto the machine as the local Administrator (the only option), and join the machine to - the Domain, following the procedure set out in Appendix A, <link linkend="domjoin"/>. The system is now - ready for the user to log on, provided you have created a network logon account for that - user, of course. - </para></step> + <step><para> + Instruct all users to log onto the workstation using their assigned username and password. + </para></step> + </procedure> - <step><para> - Instruct all users to log onto the workstation using their assigned username and password. - </para></step> - </procedure> + <procedure id="sbewinclntptrprep"> + <title>Windows Client Printer Preparation Procedure</title> + + <step><para> + Click <menuchoice> + <guimenu>Start</guimenu> + <guimenuitem>Settings</guimenuitem> + <guimenuitem>Printers</guimenuitem> + <guiicon>Add Printer</guiicon> + <guibutton>Next</guibutton> + </menuchoice>. Do not click <guimenuitem>Network printer</guimenuitem>. + Ensure that <guimenuitem>Local printer</guimenuitem> is selected. + </para></step> + + <step><para> + Click <guibutton>Next</guibutton>. In the + <guimenuitem>Manufacturer:</guimenuitem> panel, select <constant>HP</constant>. + In the <guimenuitem>Printers:</guimenuitem> panel, select the printer called + <constant>HP LaserJet 6</constant>. Click <guibutton>Next</guibutton>. + </para></step> + + <step><para> + In the <guimenuitem>Available ports:</guimenuitem> panel, select + <constant>FILE:</constant>. Accept the default printer name by clicking + <guibutton>Next</guibutton>. When asked, <quote>Would you like to print a + test page?,</quote> click <guimenuitem>No</guimenuitem>. Click + <guibutton>Finish</guibutton>. + </para></step> + + <step><para> + You may be prompted for the name of a file to print to. If so, close the + dialog panel. Right-click <menuchoice> + <guiicon>HP LaserJet 6</guiicon> + <guimenuitem>Properties</guimenuitem> + <guisubmenu>Details (Tab)</guisubmenu> + <guimenuitem>Add Port</guimenuitem> + </menuchoice>. + </para></step> + + <step><para> + In the <guimenuitem>Network</guimenuitem> panel, enter the name of + the print queue on the Samba server as follows: <constant>\\DIAMOND\hplj6a</constant>. + Click <menuchoice> + <guibutton>OK</guibutton> + <guibutton>OK</guibutton> + </menuchoice> to complete the installation. + </para></step> + + <step><para> + Repeat the printer installation steps above for both HP LaserJet 6 printers + as well as for both QMS Magicolor laser printers. + </para></step> + </procedure> </sect2> |