diff options
Diffstat (limited to 'docs/Warp.txt')
| -rw-r--r-- | docs/Warp.txt | 103 |
1 files changed, 0 insertions, 103 deletions
diff --git a/docs/Warp.txt b/docs/Warp.txt deleted file mode 100644 index 8818443a48..0000000000 --- a/docs/Warp.txt +++ /dev/null @@ -1,103 +0,0 @@ -Contributor: Wade Maxfie <maxfield@ctelcom.uucp.netcom.com> -Date: Unknown -Status: Old - -Subject: Samba with OS/2 Warp. -============================================================================ - -Note that you may also find ftp://ftp.cdrom.com/pub/os2/new/os2net.faq -useful. - - - - Can I use Samba with Warp? - - Yes. The MSClient software at ftp.microsoft.com in the Bussys -(lanman os2 directory) will work, sort of. It is version 2.2c. - - First, uncloack os2ver. (attrib -h -r -s c:\os2ver). It is a -text file. change netwksta.xxx to 20=netwksta.sys. Also add -20=setup.exe. Another change will be needed, a .vdd file. I remember -it came up during the installation as being a wrong version. I wrote -the name down, changed os2ver to include it, and restarted the -installation. - - Here is a copy of my os2ver - -setup.exe -netbios.os2 -nwifs.ifs -netwksta.sys -nwreq.sys -netbios.sys -ipx.sys -netvdd.sys - -Re-cloak os2ver. (attrib +h +r +s c:\os2ver) - -Run the installation from an OS/2 Box. Note that your mouse wont work, -use the TAB key to move around, enter to select hilighted items. - -Here is a copy of my Config.sys file regarding the Laman entries. -Note even though the version is 2.2c, it reports 2.2a in the text. - -REM ==== LANMAN 2.2a == DO NOT MODIFY BETWEEN THESE LINES == LANMAN 2. -DEVICE=C:\LANMAN\DRIVERS\PROTMAN\PROTMAN.OS2 /i:C:\LANMAN -DEVICE=C:\LANMAN\DRIVERS\ETHERNET\Ns2000\Ns2000.OS2 -RUN=C:\LANMAN\DRIVERS\PROTOCOL\tcpip\starttcp.exe -RUN=C:\LANMAN\DRIVERS\PROTOCOL\tcpip\startnb.exe -DEVICE=C:\LANMAN\DRIVERS\PROTOCOL\tcpip\tcpdrv.os2 -DEVICE=C:\LANMAN\DRIVERS\PROTOCOL\tcpip\nbdrv.os2 -DEVICE=C:\LANMAN\DRIVERS\PROTOCOL\tcpip\nmdrv.os2 -DEVICE=C:\LANMAN\arpa\sockdrv.os2 -DEVICE=C:\LANMAN\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.OS2 -DEVICE=C:\LANMAN\NETPROG\RDRHELP.SYS -IFS=C:\LANMAN\NETPROG\NETWKSTA.SYS /i:C:\LANMAN -DEVICE=C:\LANMAN\NETPROG\NETVDD.SYS -REM ==== LANMAN 2.2a == DO NOT MODIFY BETWEEN THESE LINES == LANMAN 2. - - - If you have an NE2000 card, don't reboot, or you'll be sorry. -enable the automatic backup mechanism for recovering old config.sys and -other files in OS/2. It paid for itself during this installation nightm -before I knew better!) - - Next, (or perhaps before this), if you have an NE2000 adaptor, -get the ns2000 files from hobbes.nmsu.edu (in ns2000.zip). I manually -patched protocol.ini to refer to that adaptor, and copied it into my -c:\lanman directory. Note that I also modified the driver to be loaded -in the config.sys to the ns2000.os2. It might install as an "other" -adaptor. - - A command file "startup.cmd" is placed in c:\. This file is -automatically run when OS/2 Warp starts. -Here is a copy of my startup file. Note that Warp sometimes fails to -login properly to the server. I solve this by checking for the -existance of a file, and rerunning the loing if that file fails to -exist. - -@REM ==== LANMAN 2.2a == DO NOT MODIFY BETWEEN THESE LINES == LANMAN -NET START WORKSTATION -:relogin -NET LOGON maxfield mypassword /y -rem net use f: \\packard90\d$ -rem net use g: \\linuxone\cdromsdir -rem net use h: \\linuxone\public -:doOver -if not exist f:\wildcat\wildcat.exe goto relogin -@REM ==== LANMAN 2.2a == DO NOT MODIFY BETWEEN THESE LINES == LANMAN -exit - - Finally, the system expects to be on a domain with a domain -server. BTW, TCP/IP and NetBeui allow simultaneous communication with -Os/2 lanserver 4.0, and Samba. (Note: Lanserver 4.0 won't yet to -TCP/IP. (Well,it might, but it crashes before I get to that point, so I -havent' been able to enable it)) - -I have not yet tried with only a SAMBA server on the domain. - - I would be glad to try to answer any questions at above e-mail -address, if I can. - -wade - |