diff options
Diffstat (limited to 'docs/Warp.txt')
-rw-r--r-- | docs/Warp.txt | 99 |
1 files changed, 99 insertions, 0 deletions
diff --git a/docs/Warp.txt b/docs/Warp.txt new file mode 100644 index 0000000000..9b8e6782ba --- /dev/null +++ b/docs/Warp.txt @@ -0,0 +1,99 @@ +Here is some advice from maxfield@ctelcom.uucp.netcom.com (Wade Maxfie +to use Samba with OS/2 Warp. + +Note that you may also find ftp://ftp.cdrom.com/pub/os2/new/os2net.faq +useful. + + + + Can I use Samba with Warp? + + Yes. The MSClient software at ftp.microsoft.com in the Bussys +(lanman os2 directory) will work, sort of. It is version 2.2c. + + First, uncloack os2ver. (attrib -h -r -s c:\os2ver). It is a +text file. change netwksta.xxx to 20=netwksta.sys. Also add +20=setup.exe. Another change will be needed, a .vdd file. I remember +it came up during the installation as being a wrong version. I wrote +the name down, changed os2ver to include it, and restarted the +installation. + + Here is a copy of my os2ver + +setup.exe +netbios.os2 +nwifs.ifs +netwksta.sys +nwreq.sys +netbios.sys +ipx.sys +netvdd.sys + +Re-cloak os2ver. (attrib +h +r +s c:\os2ver) + +Run the installation from an OS/2 Box. Note that your mouse wont work, +use the TAB key to move around, enter to select hilighted items. + +Here is a copy of my Config.sys file regarding the Laman entries. +Note even though the version is 2.2c, it reports 2.2a in the text. + +REM ==== LANMAN 2.2a == DO NOT MODIFY BETWEEN THESE LINES == LANMAN 2. +DEVICE=C:\LANMAN\DRIVERS\PROTMAN\PROTMAN.OS2 /i:C:\LANMAN +DEVICE=C:\LANMAN\DRIVERS\ETHERNET\Ns2000\Ns2000.OS2 +RUN=C:\LANMAN\DRIVERS\PROTOCOL\tcpip\starttcp.exe +RUN=C:\LANMAN\DRIVERS\PROTOCOL\tcpip\startnb.exe +DEVICE=C:\LANMAN\DRIVERS\PROTOCOL\tcpip\tcpdrv.os2 +DEVICE=C:\LANMAN\DRIVERS\PROTOCOL\tcpip\nbdrv.os2 +DEVICE=C:\LANMAN\DRIVERS\PROTOCOL\tcpip\nmdrv.os2 +DEVICE=C:\LANMAN\arpa\sockdrv.os2 +DEVICE=C:\LANMAN\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.OS2 +DEVICE=C:\LANMAN\NETPROG\RDRHELP.SYS +IFS=C:\LANMAN\NETPROG\NETWKSTA.SYS /i:C:\LANMAN +DEVICE=C:\LANMAN\NETPROG\NETVDD.SYS +REM ==== LANMAN 2.2a == DO NOT MODIFY BETWEEN THESE LINES == LANMAN 2. + + + If you have an NE2000 card, don't reboot, or you'll be sorry. +enable the automatic backup mechanism for recovering old config.sys and +other files in OS/2. It paid for itself during this installation nightm +before I knew better!) + + Next, (or perhaps before this), if you have an NE2000 adaptor, +get the ns2000 files from hobbes.nmsu.edu (in ns2000.zip). I manually +patched protocol.ini to refer to that adaptor, and copied it into my +c:\lanman directory. Note that I also modified the driver to be loaded +in the config.sys to the ns2000.os2. It might install as an "other" +adaptor. + + A command file "startup.cmd" is placed in c:\. This file is +automatically run when OS/2 Warp starts. +Here is a copy of my startup file. Note that Warp sometimes fails to +login properly to the server. I solve this by checking for the +existance of a file, and rerunning the loing if that file fails to +exist. + +@REM ==== LANMAN 2.2a == DO NOT MODIFY BETWEEN THESE LINES == LANMAN +NET START WORKSTATION +:relogin +NET LOGON maxfield mypassword /y +rem net use f: \\packard90\d$ +rem net use g: \\linuxone\cdromsdir +rem net use h: \\linuxone\public +:doOver +if not exist f:\wildcat\wildcat.exe goto relogin +@REM ==== LANMAN 2.2a == DO NOT MODIFY BETWEEN THESE LINES == LANMAN +exit + + Finally, the system expects to be on a domain with a domain +server. BTW, TCP/IP and NetBeui allow simultaneous communication with +Os/2 lanserver 4.0, and Samba. (Note: Lanserver 4.0 won't yet to +TCP/IP. (Well,it might, but it crashes before I get to that point, so I +havent' been able to enable it)) + +I have not yet tried with only a SAMBA server on the domain. + + I would be glad to try to answer any questions at above e-mail +address, if I can. + +wade + |