diff options
Diffstat (limited to 'docs/docbook/manpages/smbmount.8.xml')
| -rw-r--r-- | docs/docbook/manpages/smbmount.8.xml | 335 |
1 files changed, 335 insertions, 0 deletions
diff --git a/docs/docbook/manpages/smbmount.8.xml b/docs/docbook/manpages/smbmount.8.xml new file mode 100644 index 0000000000..356b4f8f61 --- /dev/null +++ b/docs/docbook/manpages/smbmount.8.xml @@ -0,0 +1,335 @@ +<?xml version="1.0" encoding="iso8859-1"?> +<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" + "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ + +<!ENTITY % globalentities SYSTEM './../global.ent'> %globalentities; +]> +<refentry id="smbmount.8"> + +<refmeta> + <refentrytitle>smbmount</refentrytitle> + <manvolnum>8</manvolnum> +</refmeta> + + +<refnamediv> + <refname>smbmount</refname> + <refpurpose>mount an smbfs filesystem</refpurpose> +</refnamediv> + +<refsynopsisdiv> + <cmdsynopsis> + <command>smbmount</command> + <arg choice="req">service</arg> + <arg choice="req">mount-point</arg> + <arg choice="opt">-o options</arg> + </cmdsynopsis> +</refsynopsisdiv> + +<refsect1> + <title>DESCRIPTION</title> + + <para><command>smbmount</command> mounts a Linux SMB filesystem. It + is usually invoked as <command>mount.smbfs</command> by + the <citerefentry><refentrytitle>mount</refentrytitle> + <manvolnum>8</manvolnum></citerefentry> command when using the + "-t smbfs" option. This command only works in Linux, and the kernel must + support the smbfs filesystem. </para> + + <para>Options to <command>smbmount</command> are specified as a comma-separated + list of key=value pairs. It is possible to send options other + than those listed here, assuming that smbfs supports them. If + you get mount failures, check your kernel log for errors on + unknown options.</para> + + <para><command>smbmount</command> is a daemon. After mounting it keeps running until + the mounted smbfs is umounted. It will log things that happen + when in daemon mode using the "machine name" smbmount, so + typically this output will end up in <filename>log.smbmount</filename>. The <command> + smbmount</command> process may also be called mount.smbfs.</para> + + <para><emphasis>NOTE:</emphasis> <command>smbmount</command> + calls <citerefentry><refentrytitle>smbmnt</refentrytitle> + <manvolnum>8</manvolnum></citerefentry> to do the actual mount. You + must make sure that <command>smbmnt</command> is in the path so + that it can be found. </para> + +</refsect1> + +<refsect1> + <title>OPTIONS</title> + + <variablelist> + <varlistentry> + <term>username=<arg></term> + <listitem><para>specifies the username to connect as. If + this is not given, then the environment variable <envar> + USER</envar> is used. This option can also take the + form "user%password" or "user/workgroup" or + "user/workgroup%password" to allow the password and workgroup + to be specified as part of the username.</para></listitem> + </varlistentry> + + <varlistentry> + <term>password=<arg></term> + <listitem><para>specifies the SMB password. If this + option is not given then the environment variable + <envar>PASSWD</envar> is used. If it can find + no password <command>smbmount</command> will prompt + for a passeword, unless the guest option is + given. </para> + + <para> + Note that passwords which contain the argument delimiter + character (i.e. a comma ',') will failed to be parsed correctly + on the command line. However, the same password defined + in the PASSWD environment variable or a credentials file (see + below) will be read correctly. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term>credentials=<filename></term> + <listitem><para>specifies a file that contains a username and/or password. +The format of the file is: +<programlisting> +username = <value> +password = <value> +</programlisting></para> + + <para>This is preferred over having passwords in plaintext in a + shared file, such as <filename>/etc/fstab</filename>. Be sure to protect any + credentials file properly. + </para></listitem> + </varlistentry> + + <varlistentry> + <term>krb</term> + <listitem><para>Use kerberos (Active Directory). </para></listitem> + </varlistentry> + + <varlistentry> + <term>netbiosname=<arg></term> + <listitem><para>sets the source NetBIOS name. It defaults + to the local hostname. </para></listitem> + </varlistentry> + + <varlistentry> + <term>uid=<arg></term> + <listitem><para>sets the uid that will own all files on + the mounted filesystem. + It may be specified as either a username or a numeric uid. + </para></listitem> + </varlistentry> + + + <varlistentry> + <term>gid=<arg></term> + <listitem><para>sets the gid that will own all files on + the mounted filesystem. + It may be specified as either a groupname or a numeric + gid. </para></listitem> + </varlistentry> + + + <varlistentry> + <term>port=<arg></term> + <listitem><para>sets the remote SMB port number. The default + is 139. </para></listitem> + </varlistentry> + + + <varlistentry> + <term>fmask=<arg></term> + <listitem><para>sets the file mask. This determines the + permissions that remote files have in the local filesystem. + The default is based on the current umask. </para></listitem> + </varlistentry> + + + <varlistentry> + <term>dmask=<arg></term> + <listitem><para>Sets the directory mask. This determines the + permissions that remote directories have in the local filesystem. + The default is based on the current umask. </para></listitem> + </varlistentry> + + + <varlistentry> + <term>debug=<arg></term> + <listitem><para>Sets the debug level. This is useful for + tracking down SMB connection problems. A suggested value to + start with is 4. If set too high there will be a lot of + output, possibly hiding the useful output.</para></listitem> + </varlistentry> + + + <varlistentry> + <term>ip=<arg></term> + <listitem><para>Sets the destination host or IP address. + </para></listitem> + </varlistentry> + + + + <varlistentry> + <term>workgroup=<arg></term> + <listitem><para>Sets the workgroup on the destination </para> + </listitem> + </varlistentry> + + + <varlistentry> + <term>sockopt=<arg></term> + <listitem><para>Sets the TCP socket options. See the <ulink + url="smb.conf.5.html#SOCKETOPTIONS"><citerefentry><refentrytitle>smb.conf</refentrytitle> + <manvolnum>5</manvolnum></citerefentry></ulink> <parameter>socket options</parameter> option. + </para></listitem> + </varlistentry> + + + <varlistentry> + <term>scope=<arg></term> + <listitem><para>Sets the NetBIOS scope </para></listitem> + </varlistentry> + + <varlistentry> + <term>guest</term> + <listitem><para>Don't prompt for a password </para></listitem> + </varlistentry> + + <varlistentry> + <term>ro</term> + <listitem><para>mount read-only </para></listitem> + </varlistentry> + + <varlistentry> + <term>rw</term><listitem><para>mount read-write </para></listitem> + </varlistentry> + + <varlistentry> + <term>iocharset=<arg></term> + <listitem><para> + sets the charset used by the Linux side for codepage + to charset translations (NLS). Argument should be the + name of a charset, like iso8859-1. (Note: only kernel + 2.4.0 or later) + </para></listitem> + </varlistentry> + + <varlistentry> + <term>codepage=<arg></term> + <listitem><para> + sets the codepage the server uses. See the iocharset + option. Example value cp850. (Note: only kernel 2.4.0 + or later) + </para></listitem> + </varlistentry> + + <varlistentry> + <term>ttl=<arg></term> + <listitem><para> + sets how long a directory listing is cached in milliseconds + (also affects visibility of file size and date + changes). A higher value means that changes on the + server take longer to be noticed but it can give + better performance on large directories, especially + over long distances. Default is 1000ms but something + like 10000ms (10 seconds) is probably more reasonable + in many cases. + (Note: only kernel 2.4.2 or later) + </para></listitem> + </varlistentry> + + </variablelist> + + +</refsect1> + +<refsect1> + <title>ENVIRONMENT VARIABLES</title> + + <para>The variable <envar>USER</envar> may contain the username of the + person using the client. This information is used only if the + protocol level is high enough to support session-level + passwords. The variable can be used to set both username and + password by using the format username%password.</para> + + <para>The variable <envar>PASSWD</envar> may contain the password of the + person using the client. This information is used only if the + protocol level is high enough to support session-level + passwords.</para> + + <para>The variable <envar>PASSWD_FILE</envar> may contain the pathname + of a file to read the password from. A single line of input is + read and used as the password.</para> +</refsect1> + + +<refsect1> + <title>BUGS</title> + + <para>Passwords and other options containing , can not be handled. + For passwords an alternative way of passing them is in a credentials + file or in the PASSWD environment.</para> + + <para>The credentials file does not handle usernames or passwords with + leading space.</para> + + <para>One smbfs bug is important enough to mention here, even if it + is a bit misplaced:</para> + + <itemizedlist> + + <listitem><para>Mounts sometimes stop working. This is usually + caused by smbmount terminating. Since smbfs needs smbmount to + reconnect when the server disconnects, the mount will eventually go + dead. An umount/mount normally fixes this. At least 2 ways to + trigger this bug are known.</para></listitem> + + </itemizedlist> + + <para>Note that the typical response to a bug report is suggestion + to try the latest version first. So please try doing that first, + and always include which versions you use of relevant software + when reporting bugs (minimum: samba, kernel, distribution)</para> + +</refsect1> + + +<refsect1> + <title>SEE ALSO</title> + + <para>Documentation/filesystems/smbfs.txt in the linux kernel + source tree may contain additional options and information.</para> + + <para>FreeBSD also has a smbfs, but it is not related to smbmount</para> + + <para>For Solaris, HP-UX and others you may want to look at <citerefentry><refentrytitle>smbsh</refentrytitle> + <manvolnum>1</manvolnum></citerefentry> or at other solutions, such as + Sharity or perhaps replacing the SMB server with a NFS server.</para> + +</refsect1> + + +<refsect1> + <title>AUTHOR</title> + + <para>Volker Lendecke, Andrew Tridgell, Michael H. Warfield + and others.</para> + + <para>The current maintainer of smbfs and the userspace + tools <command>smbmount</command>, <command>smbumount</command>, + and <command>smbmnt</command> is <ulink + url="mailto:urban@teststation.com">Urban Widmark</ulink>. + The <ulink url="mailto:samba@samba.org">SAMBA Mailing list</ulink> + is the preferred place to ask questions regarding these programs. + </para> + + <para>The conversion of this manpage for Samba 2.2 was performed + by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 + was done by Alexander Bokovoy.</para> +</refsect1> + +</refentry> |