diff options
Diffstat (limited to 'docs/docbook/projdoc/OS2-Client-HOWTO.sgml')
| -rw-r--r-- | docs/docbook/projdoc/OS2-Client-HOWTO.sgml | 142 |
1 files changed, 0 insertions, 142 deletions
diff --git a/docs/docbook/projdoc/OS2-Client-HOWTO.sgml b/docs/docbook/projdoc/OS2-Client-HOWTO.sgml deleted file mode 100644 index ca7ad6a754..0000000000 --- a/docs/docbook/projdoc/OS2-Client-HOWTO.sgml +++ /dev/null @@ -1,142 +0,0 @@ -<chapter id="os2"> - - -<chapterinfo> - <author> - <firstname>Jim</firstname><surname>McDonough</surname> - <affiliation> - <orgname>IBM</orgname> - <address> - <email>jerry@samba.org</email> - </address> - </affiliation> - </author> - - - <pubdate>5 Mar 2001</pubdate> -</chapterinfo> - -<title>OS2 Client HOWTO</title> - -<sect1> - <title>FAQs</title> - - <sect2> - <title>How can I configure OS/2 Warp Connect or - OS/2 Warp 4 as a client for Samba?</title> - - <para>A more complete answer to this question can be - found on <ulink url="http://carol.wins.uva.nl/~leeuw/samba/warp.html"> - http://carol.wins.uva.nl/~leeuw/samba/warp.html</ulink>.</para> - - <para>Basically, you need three components:</para> - - <itemizedlist> - <listitem><para>The File and Print Client ('IBM Peer') - </para></listitem> - <listitem><para>TCP/IP ('Internet support') - </para></listitem> - <listitem><para>The "NetBIOS over TCP/IP" driver ('TCPBEUI') - </para></listitem> - </itemizedlist> - - <para>Installing the first two together with the base operating - system on a blank system is explained in the Warp manual. If Warp - has already been installed, but you now want to install the - networking support, use the "Selective Install for Networking" - object in the "System Setup" folder.</para> - - <para>Adding the "NetBIOS over TCP/IP" driver is not described - in the manual and just barely in the online documentation. Start - MPTS.EXE, click on OK, click on "Configure LAPS" and click - on "IBM OS/2 NETBIOS OVER TCP/IP" in 'Protocols'. This line - is then moved to 'Current Configuration'. Select that line, - click on "Change number" and increase it from 0 to 1. Save this - configuration.</para> - - <para>If the Samba server(s) is not on your local subnet, you - can optionally add IP names and addresses of these servers - to the "Names List", or specify a WINS server ('NetBIOS - Nameserver' in IBM and RFC terminology). For Warp Connect you - may need to download an update for 'IBM Peer' to bring it on - the same level as Warp 4. See the webpage mentioned above.</para> - </sect2> - - <sect2> - <title>How can I configure OS/2 Warp 3 (not Connect), - OS/2 1.2, 1.3 or 2.x for Samba?</title> - - <para>You can use the free Microsoft LAN Manager 2.2c Client - for OS/2 from - <ulink url="ftp://ftp.microsoft.com/BusSys/Clients/LANMAN.OS2/"> - ftp://ftp.microsoft.com/BusSys/Clients/LANMAN.OS2/</ulink>. - See <ulink url="http://carol.wins.uva.nl/~leeuw/lanman.html"> - http://carol.wins.uva.nl/~leeuw/lanman.html</ulink> for - more information on how to install and use this client. In - a nutshell, edit the file \OS2VER in the root directory of - the OS/2 boot partition and add the lines:</para> - - <para><programlisting> - 20=setup.exe - 20=netwksta.sys - 20=netvdd.sys - </programlisting></para> - - <para>before you install the client. Also, don't use the - included NE2000 driver because it is buggy. Try the NE2000 - or NS2000 driver from - <ulink url="ftp://ftp.cdrom.com/pub/os2/network/ndis/"> - ftp://ftp.cdrom.com/pub/os2/network/ndis/</ulink> instead. - </para> - </sect2> - - <sect2> - <title>Are there any other issues when OS/2 (any version) - is used as a client?</title> - - <para>When you do a NET VIEW or use the "File and Print - Client Resource Browser", no Samba servers show up. This can - be fixed by a patch from <ulink - url="http://carol.wins.uva.nl/~leeuw/samba/fix.html"> - http://carol.wins.uva.nl/~leeuw/samba/fix.html</ulink>. - The patch will be included in a later version of Samba. It also - fixes a couple of other problems, such as preserving long - filenames when objects are dragged from the Workplace Shell - to the Samba server. </para> - </sect2> - - <sect2> - <title>How do I get printer driver download working - for OS/2 clients?</title> - - <para>First, create a share called [PRINTDRV] that is - world-readable. Copy your OS/2 driver files there. Note - that the .EA_ files must still be separate, so you will need - to use the original install files, and not copy an installed - driver from an OS/2 system.</para> - - <para>Install the NT driver first for that printer. Then, - add to your smb.conf a parameter, "os2 driver map = - <replaceable>filename</replaceable>". Then, in the file - specified by <replaceable>filename</replaceable>, map the - name of the NT driver name to the OS/2 driver name as - follows:</para> - - <para><nt driver name> = <os2 driver - name>.<device name>, e.g.: - HP LaserJet 5L = LASERJET.HP LaserJet 5L</para> - - <para>You can have multiple drivers mapped in this file.</para> - - <para>If you only specify the OS/2 driver name, and not the - device name, the first attempt to download the driver will - actually download the files, but the OS/2 client will tell - you the driver is not available. On the second attempt, it - will work. This is fixed simply by adding the device name - to the mapping, after which it will work on the first attempt. - </para> - </sect2> -</sect1> - -</chapter> - |