diff options
Diffstat (limited to 'docs/docbook/projdoc/OS2-Client-HOWTO.sgml')
| -rw-r--r-- | docs/docbook/projdoc/OS2-Client-HOWTO.sgml | 142 |
1 files changed, 142 insertions, 0 deletions
diff --git a/docs/docbook/projdoc/OS2-Client-HOWTO.sgml b/docs/docbook/projdoc/OS2-Client-HOWTO.sgml new file mode 100644 index 0000000000..5db80cda3d --- /dev/null +++ b/docs/docbook/projdoc/OS2-Client-HOWTO.sgml @@ -0,0 +1,142 @@ +<chapter> + + +<chapterinfo> + <author> + <firstname>Jim</firstname><surname>McDonough</surname> + <affiliation> + <orgname>IBM</orgname> + <address> + <email>jerry@samba.org</email> + </address> + </affiliation> + </author> + + + <pubdate>5 Mar 2001</pubdate> +</chapterinfo> + +<title>OS2 Client HOWTO</title> + +<sect1> + <title>FAQs</title> + + <sect2> + <title>How can I configure OS/2 Warp Connect or + OS/2 Warp 4 as a client for Samba?</title> + + <para>A more complete answer to this question can be + found on <ulink url="http://carol.wins.uva.nl/~leeuw/samba/warp.html"> + http://carol.wins.uva.nl/~leeuw/samba/warp.html</ulink>.</para> + + <para>Basically, you need three components:</para> + + <itemizedlist> + <listitem><para>The File and Print Client ('IBM Peer') + </para></listitem> + <listitem><para>TCP/IP ('Internet support') + </para></listitem> + <listitem><para>The "NetBIOS over TCP/IP" driver ('TCPBEUI') + </para></listitem> + </itemizedlist> + + <para>Installing the first two together with the base operating + system on a blank system is explained in the Warp manual. If Warp + has already been installed, but you now want to install the + networking support, use the "Selective Install for Networking" + object in the "System Setup" folder.</para> + + <para>Adding the "NetBIOS over TCP/IP" driver is not described + in the manual and just barely in the online documentation. Start + MPTS.EXE, click on OK, click on "Configure LAPS" and click + on "IBM OS/2 NETBIOS OVER TCP/IP" in 'Protocols'. This line + is then moved to 'Current Configuration'. Select that line, + click on "Change number" and increase it from 0 to 1. Save this + configuration.</para> + + <para>If the Samba server(s) is not on your local subnet, you + can optionally add IP names and addresses of these servers + to the "Names List", or specify a WINS server ('NetBIOS + Nameserver' in IBM and RFC terminology). For Warp Connect you + may need to download an update for 'IBM Peer' to bring it on + the same level as Warp 4. See the webpage mentioned above.</para> + </sect2> + + <sect2> + <title>How can I configure OS/2 Warp 3 (not Connect), + OS/2 1.2, 1.3 or 2.x for Samba?</title> + + <para>You can use the free Microsoft LAN Manager 2.2c Client + for OS/2 from + <ulink url="ftp://ftp.microsoft.com/BusSys/Clients/LANMAN.OS2/"> + ftp://ftp.microsoft.com/BusSys/Clients/LANMAN.OS2/</ulink>. + See <ulink url="http://carol.wins.uva.nl/~leeuw/lanman.html"> + http://carol.wins.uva.nl/~leeuw/lanman.html</ulink> for + more information on how to install and use this client. In + a nutshell, edit the file \OS2VER in the root directory of + the OS/2 boot partition and add the lines:</para> + + <para><programlisting> + 20=setup.exe + 20=netwksta.sys + 20=netvdd.sys + </programlisting></para> + + <para>before you install the client. Also, don't use the + included NE2000 driver because it is buggy. Try the NE2000 + or NS2000 driver from + <ulink url="ftp://ftp.cdrom.com/pub/os2/network/ndis/"> + ftp://ftp.cdrom.com/pub/os2/network/ndis/</ulink> instead. + </para> + </sect2> + + <sect2> + <title>Are there any other issues when OS/2 (any version) + is used as a client?</title> + + <para>When you do a NET VIEW or use the "File and Print + Client Resource Browser", no Samba servers show up. This can + be fixed by a patch from <ulink + url="http://carol.wins.uva.nl/~leeuw/samba/fix.html"> + http://carol.wins.uva.nl/~leeuw/samba/fix.html</ulink>. + The patch will be included in a later version of Samba. It also + fixes a couple of other problems, such as preserving long + filenames when objects are dragged from the Workplace Shell + to the Samba server. </para> + </sect2> + + <sect2> + <title>How do I get printer driver download working + for OS/2 clients?</title> + + <para>First, create a share called [PRINTDRV] that is + world-readable. Copy your OS/2 driver files there. Note + that the .EA_ files must still be separate, so you will need + to use the original install files, and not copy an installed + driver from an OS/2 system.</para> + + <para>Install the NT driver first for that printer. Then, + add to your smb.conf a paramater, "os2 driver map = + <replaceable>filename</replaceable>". Then, in the file + specified by <replaceable>filename</replaceable>, map the + name of the NT driver name to the OS/2 driver name as + follows:</para> + + <para><nt driver name> = <os2 driver + name>.<device name>, e.g.: + HP LaserJet 5L = LASERJET.HP LaserJet 5L</para> + + <para>You can have multiple drivers mapped in this file.</para> + + <para>If you only specify the OS/2 driver name, and not the + device name, the first attempt to download the driver will + actually download the files, but the OS/2 client will tell + you the driver is not available. On the second attempt, it + will work. This is fixed simply by adding the device name + to the mapping, after which it will work on the first attempt. + </para> + </sect2> +</sect1> + +</chapter> + |