summaryrefslogtreecommitdiff
path: root/docs/docbook
diff options
context:
space:
mode:
Diffstat (limited to 'docs/docbook')
-rw-r--r--docs/docbook/faq/config.sgml11
-rw-r--r--docs/docbook/faq/errors.sgml170
-rw-r--r--docs/docbook/faq/features.sgml376
-rw-r--r--docs/docbook/faq/sambafaq.sgml37
-rw-r--r--docs/docbook/projdoc/Browsing-Quickguide.sgml280
5 files changed, 874 insertions, 0 deletions
diff --git a/docs/docbook/faq/config.sgml b/docs/docbook/faq/config.sgml
new file mode 100644
index 0000000000..78f73252a2
--- /dev/null
+++ b/docs/docbook/faq/config.sgml
@@ -0,0 +1,11 @@
+<chapter id="Config">
+<title>Configuration problems</title>
+
+<sect1>
+<title>I have set 'force user' and samba still makes 'root' the owner of all the files I touch!</title>
+<para>
+When you have a user in 'admin users', samba will always do file operations for
+this user as 'root', even if 'force user' has been set.
+</para>
+</sect1>
+</chapter>
diff --git a/docs/docbook/faq/errors.sgml b/docs/docbook/faq/errors.sgml
new file mode 100644
index 0000000000..2f378a3688
--- /dev/null
+++ b/docs/docbook/faq/errors.sgml
@@ -0,0 +1,170 @@
+<chapter id="errors">
+
+<title>Common errors</title>
+
+<sect1>
+<title>Not listening for calling name</title>
+
+<para>
+<programlisting>
+Session request failed (131,129) with myname=HOBBES destname=CALVIN
+Not listening for calling name
+</programlisting>
+</para>
+
+<para>
+If you get this when talking to a Samba box then it means that your
+global "hosts allow" or "hosts deny" settings are causing the Samba
+server to refuse the connection.
+</para>
+
+<para>
+Look carefully at your "hosts allow" and "hosts deny" lines in the
+global section of smb.conf.
+</para>
+
+<para>
+It can also be a problem with reverse DNS lookups not functioning
+correctly, leading to the remote host identity not being able to
+be confirmed, but that is less likely.
+</para>
+</sect1>
+
+<sect1>
+<title>System Error 1240</title>
+
+<para>
+System error 1240 means that the client is refusing to talk
+to a non-encrypting server. Microsoft changed WinNT in service
+pack 3 to refuse to connect to servers that do not support
+SMB password encryption.
+</para>
+
+<para>There are two main solutions:
+<simplelist>
+<member>enable SMB password encryption in Samba. See the encryption part of
+the samba HOWTO Collection</member>
+
+<member>disable this new behaviour in NT. See the section about
+Windows NT in the chapter "Portability" of the samba HOWTO collection
+</member>
+</simplelist>
+
+</sect1>
+
+<sect1>
+<title>smbclient ignores -N !</title>
+
+<para>
+<quote>When getting the list of shares available on a host using the command
+<command>smbclient -N -L</command>
+the program always prompts for the password if the server is a Samba server.
+It also ignores the "-N" argument when querying some (but not all) of our
+NT servers.
+</quote>
+
+<para>
+No, it does not ignore -N, it is just that your server rejected the
+null password in the connection, so smbclient prompts for a password
+to try again.
+</para>
+
+<para>
+To get the behaviour that you probably want use <command>smbclient -L host -U%</command>
+</para>
+
+<para>
+This will set both the username and password to null, which is
+an anonymous login for SMB. Using -N would only set the password
+to null, and this is not accepted as an anonymous login for most
+SMB servers.
+</para>
+
+</sect1>
+
+<sect1>
+<title>The data on the CD-Drive I've shared seems to be corrupted!</title>
+
+<para>
+Some OSes (notably Linux) default to auto detection of file type on
+cdroms and do cr/lf translation. This is a very bad idea when use with
+Samba. It causes all sorts of stuff ups.
+</para>
+
+<para>
+To overcome this problem use conv=binary when mounting the cdrom
+before exporting it with Samba.
+</para>
+
+</sect1>
+
+<sect1>
+<title>Why can users access home directories of other users?</title>
+
+<para>
+<quote>
+We are unable to keep individual users from mapping to any other user's
+home directory once they have supplied a valid password! They only need
+to enter their own password. I have not found *any* method that I can
+use to configure samba to enforce that only a user may map their own
+home directory.
+</quote>
+</para>
+
+<para><quote>
+User xyzzy can map his home directory. Once mapped user xyzzy can also map
+*anyone* elses home directory!
+</quote></para>
+
+<para>
+This is not a security flaw, it is by design. Samba allows
+users to have *exactly* the same access to the UNIX filesystem
+as they would if they were logged onto the UNIX box, except
+that it only allows such views onto the file system as are
+allowed by the defined shares.
+</para>
+
+<para>
+This means that if your UNIX home directories are set up
+such that one user can happily cd into another users
+directory and do an ls, the UNIX security solution is to
+change the UNIX file permissions on the users home directories
+such that the cd and ls would be denied.
+</para>
+
+<para>
+Samba tries very hard not to second guess the UNIX administrators
+security policies, and trusts the UNIX admin to set
+the policies and permissions he or she desires.
+</para>
+
+<para>
+Samba does allow the setup you require when you have set the
+"only user = yes" option on the share, is that you have not set the
+valid users list for the share.
+</para>
+
+<para>
+Note that only user works in conjunction with the users= list,
+so to get the behavior you require, add the line :
+<programlisting>
+users = %S
+</programlisting>
+this is equivalent to:
+<programlisting>
+valid users = %S
+</programlisting>
+to the definition of the [homes] share, as recommended in
+the smb.conf man page.
+</para>
+
+</sect1>
+
+<sect1>
+<title>Until a few minutes after samba has started, clients get the error "Domain Controller Unavailable"</title>
+<para>
+A domain controller has to announce on the network who it is. This usually takes a while.
+</para>
+</sect1>
+
+</chapter>
diff --git a/docs/docbook/faq/features.sgml b/docs/docbook/faq/features.sgml
new file mode 100644
index 0000000000..d464885f9e
--- /dev/null
+++ b/docs/docbook/faq/features.sgml
@@ -0,0 +1,376 @@
+<chapter id="features">
+
+<title>Features</title>
+
+<sect1>
+<title>How can I prevent my samba server from being used to distribute the Nimda worm?</title>
+
+<para>Author: HASEGAWA Yosuke (translated by <ulink url="monyo@samba.gr.jp">TAKAHASHI Motonobu</ulink>)</para>
+
+<para>
+Nimba Worm is infected through shared disks on a network, as well as through
+Microsoft IIS, Internet Explorer and mailer of Outlook series.
+</para>
+
+<para>
+At this time, the worm copies itself by the name *.nws and *.eml on
+the shared disk, moreover, by the name of Riched20.dll in the folder
+where *.doc file is included.
+</para>
+
+<para>
+To prevent infection through the shared disk offered by Samba, set
+up as follows:
+</para>
+
+<para>
+<programlisting>
+[global]
+ ...
+ # This can break Administration installations of Office2k.
+ # in that case, don't veto the riched20.dll
+ veto files = /*.eml/*.nws/riched20.dll/
+</programlisting>
+</para>
+
+<para>
+By setting the "veto files" parameter, matched files on the Samba
+server are completely hidden from the clients and making it impossible
+to access them at all.
+</para>
+
+<para>
+In addition to it, the following setting is also pointed out by the
+samba-jp:09448 thread: when the
+"readme.txt.{3050F4D8-98B5-11CF-BB82-00AA00BDCE0B}" file exists on
+a Samba server, it is visible only as "readme.txt" and dangerous
+code may be executed if this file is double-clicked.
+</para>
+
+<para>
+Setting the following,
+<programlisting>
+ veto files = /*.{*}/
+</programlisting>
+any files having CLSID in its file extension will be inaccessible from any
+clients.
+</para>
+
+<para>
+This technical article is created based on the discussion of
+samba-jp:09448 and samba-jp:10900 threads.
+</para>
+</sect1>
+
+<sect1>
+<title>How can I use samba as a fax server?</title>
+
+<para>Contributor: <ulink url="mailto:zuber@berlin.snafu.de">Gerhard Zuber</ulink></para>
+
+<para>Requirements:
+<simplelist>
+<member>UNIX box (Linux preferred) with SAMBA and a faxmodem</member>
+<member>ghostscript package</member>
+<member>mgetty+sendfax package</member>
+<member>pbm package (portable bitmap tools)</member>
+</simplelist>
+</para>
+
+<para>First, install and configure the required packages. Be sure to read the mgetty+sendfax
+manual carefully.</para>
+
+<sect2>
+<title>Tools for printing faxes</title>
+
+<para>Your incomed faxes are in:
+<filename>/var/spool/fax/incoming</filename>
+
+<para>print it with:</para>
+
+<para><programlisting>
+for i in *
+do
+g3cat $i | g3tolj | lpr -P hp
+done
+</programlisting>
+</para>
+
+<para>
+g3cat is in the tools-section, g3tolj is in the contrib-section
+for printing to HP lasers.
+</para>
+
+<para>
+If you want to produce files for displaying and printing with Windows, use
+some tools from the pbm-package like the following command: <command>g3cat $i | g3topbm - | ppmtopcx - >$i.pcx</command>
+and view it with your favourite Windows tool (maybe paintbrush)
+</para>
+
+</sect2>
+
+<sect2>
+<title>Making the fax-server</title>
+
+<para>fetch the file <filename>mgetty+sendfax/frontends/winword/faxfilter</filename> and place it in <filename>/usr/local/etc/mgetty+sendfax/</filename>(replace /usr/local/ with whatever place you installed mgetty+sendfax)</para>
+
+<para>prepare your faxspool file as mentioned in this file
+edit fax/faxspool.in and reinstall or change the final
+/usr/local/bin/faxspool too.
+</para>
+
+<para><programlisting>
+if [ "$user" = "root" -o "$user" = "fax" -o \
+ "$user" = "lp" -o "$user" = "daemon" -o "$user" = "bin" ]
+</programlisting></para>
+
+<para>find the first line and change it to the second.</para>
+
+<para>
+make sure you have pbmtext (from the pbm-package). This is
+needed for creating the small header line on each page.
+</para>
+
+<para>Prepare your faxheader <filename>/usr/local/etc/mgetty+sendfax/faxheader</filename></para>
+
+<para>
+Edit your /etc/printcap file:
+<programlisting>
+# FAX
+lp3|fax:\
+ :lp=/dev/null:\
+ :sd=/usr/spool/lp3:\
+ :if=/usr/local/etc/mgetty+sendfax/faxfilter:sh:sf:mx#0:\
+ :lf=/usr/spool/lp3/fax-log:
+</programlisting>
+
+<para>Now, edit your <filename>smb.conf</filename> so you have a smb based printer named "fax"</para>
+
+</sect2>
+
+<sect2>
+<title>Installing the client drivers</title>
+
+<para>
+Now you have a printer called "fax" which can be used via
+TCP/IP-printing (lpd-system) or via SAMBA (windows printing).
+</para>
+
+<para>
+On every system you are able to produce postscript-files you
+are ready to fax.
+</para>
+
+<para>
+On Windows 3.1 95 and NT:
+</para>
+
+<para>
+Install a printer wich produces postscript output,
+ e.g. apple laserwriter
+</para>
+
+<para>Connect the "fax" to your printer.</para>
+
+<para>
+Now write your first fax. Use your favourite wordprocessor,
+write, winword, notepad or whatever you want, and start
+with the headerpage.
+</para>
+
+<para>
+Usually each fax has a header page. It carries your name,
+your address, your phone/fax-number.
+</para>
+
+<para>
+It carries also the recipient, his address and his *** fax
+number ***. Now here is the trick:
+</para>
+
+<para>
+Use the text:
+<programlisting>
+Fax-Nr: 123456789
+</programlisting>
+as the recipients fax-number. Make sure this text does not
+occur in regular text ! Make sure this text is not broken
+by formatting information, e.g. format it as a single entity.
+(Windows Write and Win95 Wordpad are functional, maybe newer
+ versions of Winword are breaking formatting information).
+</para>
+
+<para>
+The trick is that postscript output is human readable and
+the faxfilter program scans the text for this pattern and
+uses the found number as the fax-destination-number.
+</para>
+
+<para>
+Now print your fax through the fax-printer and it will be
+queued for later transmission. Use faxrunq for sending the
+queue out.
+</para>
+
+</sect2>
+
+<sect2>
+<title>Example smb.conf</title>
+
+<para><programlisting>
+[global]
+ printcap name = /etc/printcap
+ print command = /usr/bin/lpr -r -P %p %s
+ lpq command = /usr/bin/lpq -P %p
+ lprm command = /usr/bin/lprm -P %p %j
+
+[fax]
+ comment = FAX (mgetty+sendfax)
+ path = /tmp
+ printable = yes
+ public = yes
+ writable = no
+ create mode = 0700
+ browseable = yes
+ guest ok = no
+</programlisting></para>
+
+</sect2>
+</sect1>
+
+<sect1>
+<title>Samba doesn't work well together with DHCP!</title>
+
+<para>
+We wish to help those folks who wish to use the ISC DHCP Server and provide
+sample configuration settings. Most operating systems today come ship with
+the ISC DHCP Server. ISC DHCP is available from:
+<ulink url="ftp://ftp.isc.org/isc/dhcp">ftp://ftp.isc.org/isc/dhcp</ulink>
+</para>
+
+<para>
+Incorrect configuration of MS Windows clients (Windows9X, Windows ME, Windows
+NT/2000) will lead to problems with browsing and with general network
+operation. Windows 9X/ME users often report problems where the TCP/IP and related
+network settings will inadvertantly become reset at machine start-up resulting
+in loss of configuration settings. This results in increased maintenance
+overheads as well as serious user frustration.
+</para>
+
+<para>
+In recent times users on one mailing list incorrectly attributed the cause of
+network operating problems to incorrect configuration of Samba.
+</para>
+
+<para>
+One user insisted that the only way to provent Windows95 from periodically
+performing a full system reset and hardware detection process on start-up was
+to install the NetBEUI protocol in addition to TCP/IP. This assertion is not
+correct.
+</para>
+
+<para>
+In the first place, there is NO need for NetBEUI. All Microsoft Windows clients
+natively run NetBIOS over TCP/IP, and that is the only protocol that is
+recognised by Samba. Installation of NetBEUI and/or NetBIOS over IPX will
+cause problems with browse list operation on most networks. Even Windows NT
+networks experience these problems when incorrectly configured Windows95
+systems share the same name space. It is important that only those protocols
+that are strictly needed for site specific reasons should EVER be installed.
+</para>
+
+<para>
+Secondly, and totally against common opinion, DHCP is NOT an evil design but is
+an extension of the BOOTP protocol that has been in use in Unix environments
+for many years without any of the melt-down problems that some sensationalists
+would have us believe can be experienced with DHCP. In fact, DHCP in covered by
+rfc1541 and is a very safe method of keeping an MS Windows desktop environment
+under control and for ensuring stable network operation.
+</para>
+
+<para>
+Please note that MS Windows systems as of MS Windows NT 3.1 and MS Windows 95
+store all network configuration settings a registry. There are a few reports
+from MS Windows network administrators that warrant mention here. It would appear
+that when one sets certain MS TCP/IP protocol settings (either directly or via
+DHCP) that these do get written to the registry. Even though a subsequent
+change of setting may occur the old value may persist in the registry. This
+has been known to create serious networking problems.
+</para>
+
+<para>
+An example of this occurs when a manual TCP/IP environment is configured to
+include a NetBIOS Scope. In this event, when the administrator then changes the
+configuration of the MS TCP/IP protocol stack, without first deleting the
+current settings, by simply checking the box to configure the MS TCP/IP stack
+via DHCP then the NetBIOS Scope that is still persistent in the registry WILL be
+applied to the resulting DHCP offered settings UNLESS the DHCP server also sets
+a NetBIOS Scope. It may therefore be prudent to forcibly apply a NULL NetBIOS
+Scope from your DHCP server. The can be done in the dhcpd.conf file with the
+parameter:
+<command>option netbios-scope "";</command>
+</para>
+
+<para>
+While it is true that the Microsoft DHCP server that comes with Windows NT
+Server provides only a sub-set of rfc1533 functionality this is hardly an issue
+in those sites that already have a large investment and commitment to Unix
+systems and technologies. The current state of the art of the DHCP Server
+specification in covered in rfc2132.
+</para>
+
+</sect1>
+
+<sect1>
+<title>How can I assign NetBIOS names to clients with DHCP?</title>
+
+<para>
+SMB network clients need to be configured so that all standard TCP/IP name to
+address resolution works correctly. Once this has been achieved the SMB
+environment provides additional tools and services that act as helper agents in
+the translation of SMB (NetBIOS) names to their appropriate IP Addresses. One
+such helper agent is the NetBIOS Name Server (NBNS) or as Microsoft called it
+in their Windows NT Server implementation WINS (Windows Internet Name Server).
+</para>
+
+<para>
+A client needs to be configured so that it has a unique Machine (Computer)
+Name.
+</para>
+
+<para>
+This can be done, but needs a few NT registry hacks and you need to be able to
+speak UNICODE, which is of course no problem for a True Wizzard(tm) :)
+Instructions on how to do this (including a small util for less capable
+Wizzards) can be found at
+</para>
+
+<para><ulink url="http://www.unixtools.org/~nneul/sw/nt/dhcp-netbios-hostname.html">http://www.unixtools.org/~nneul/sw/nt/dhcp-netbios-hostname.html</ulink></para>
+
+</sect1>
+
+<sect1>
+<title>How do I convert between unix and dos text formats?</title>
+
+<para>
+Jim barry has written an <ulink url="ftp://samba.org/pub/samba/contributed/fixcrlf.zip">
+excellent drag-and-drop cr/lf converter for
+windows</ulink>. Just drag your file onto the icon and it converts the file.
+</para>
+
+<para>
+The utilities unix2dos and dos2unix(in the mtools package) should do
+the job under unix.
+</para>
+
+</sect1>
+
+<sect1>
+<title>Does samba have wins replication support?</title>
+
+<para>
+At the time of writing there is currently being worked on a wins replication implementation(wrepld).
+</para>
+
+</sect1>
+
+</chapter>
diff --git a/docs/docbook/faq/sambafaq.sgml b/docs/docbook/faq/sambafaq.sgml
new file mode 100644
index 0000000000..e9e5ed7a3c
--- /dev/null
+++ b/docs/docbook/faq/sambafaq.sgml
@@ -0,0 +1,37 @@
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [
+<!ENTITY general SYSTEM "general.sgml">
+<!ENTITY install SYSTEM "install.sgml">
+<!ENTITY errors SYSTEM "errors.sgml">
+<!ENTITY clientapp SYSTEM "clientapp.sgml">
+<!ENTITY features SYSTEM "features.sgml">
+<!ENTITY config SYSTEM "config.sgml">
+]>
+
+<book id="Samba-FAQ">
+<title>Samba FAQ</title>
+
+<bookinfo>
+ <author><surname>Samba Team</surname></author>
+ <pubdate>October 2002</pubdate>
+</bookinfo>
+
+<dedication>
+<para>
+This is the Frequently Asked Questions (FAQ) document for
+Samba, the free and very popular SMB server product. An SMB server
+allows file and printer connections from clients such as Windows,
+OS/2, Linux and others. Current to version 3.0. Please send any
+corrections to the samba documentation mailinglist at
+<ulink url="mailto:samba-doc@samba.org">samba-doc@samba.org</ulink>.
+This FAQ was based on the old Samba FAQ by Dan Shearer and Paul Blackman,
+and the old samba text documents which were mostly written by John Terpstra.
+</para>
+</dedication>
+
+&general;
+&install;
+&config;
+&clientapp;
+&errors;
+&features;
+</book>
diff --git a/docs/docbook/projdoc/Browsing-Quickguide.sgml b/docs/docbook/projdoc/Browsing-Quickguide.sgml
new file mode 100644
index 0000000000..deb431020d
--- /dev/null
+++ b/docs/docbook/projdoc/Browsing-Quickguide.sgml
@@ -0,0 +1,280 @@
+<chapter id="Browsing-Quick">
+<chapterinfo>
+ <author>
+ <firstname>John</firstname><surname>Terpstra</surname>
+ </author>
+ <pubdate>July 5, 1998</pubdate>
+</chapterinfo>
+
+<title>Quick Cross Subnet Browsing / Cross Workgroup Browsing guide</title>
+
+<para>
+This document should be read in conjunction with Browsing and may
+be taken as the fast track guide to implementing browsing across subnets
+and / or across workgroups (or domains). WINS is the best tool for resolution
+of NetBIOS names to IP addesses. WINS is NOT involved in browse list handling
+except by way of name to address mapping.
+</para>
+
+<sect1>
+<title>Discussion</title>
+
+<para>
+Firstly, all MS Windows networking is based on SMB (Server Message
+Block) based messaging. SMB messaging is implemented using NetBIOS. Samba
+implements NetBIOS by encapsulating it over TCP/IP. MS Windows products can
+do likewise. NetBIOS based networking uses broadcast messaging to affect
+browse list management. When running NetBIOS over TCP/IP this uses UDP
+based messaging. UDP messages can be broadcast or unicast.
+</para>
+
+<para>
+Normally, only unicast UDP messaging can be forwarded by routers. The
+"remote announce" parameter to smb.conf helps to project browse announcements
+to remote network segments via unicast UDP. Similarly, the "remote browse sync"
+parameter of smb.conf implements browse list collation using unicast UDP.
+</para>
+
+<para>
+Secondly, in those networks where Samba is the only SMB server technology
+wherever possible nmbd should be configured on one (1) machine as the WINS
+server. This makes it easy to manage the browsing environment. If each network
+segment is configured with it's own Samba WINS server, then the only way to
+get cross segment browsing to work is by using the "remote announce" and
+the "remote browse sync" parameters to your smb.conf file.
+</para>
+
+<para>
+If only one WINS server is used then the use of the "remote announce" and the
+"remote browse sync" parameters should NOT be necessary.
+</para>
+
+<para>
+Samba WINS does not support MS-WINS replication. This means that when setting up
+Samba as a WINS server there must only be one nmbd configured as a WINS server
+on the network. Some sites have used multiple Samba WINS servers for redundancy
+(one server per subnet) and then used "remote browse sync" and "remote announce"
+to affect browse list collation across all segments. Note that this means
+clients will only resolve local names, and must be configured to use DNS to
+resolve names on other subnets in order to resolve the IP addresses of the
+servers they can see on other subnets. This setup is not recommended, but is
+mentioned as a practical consideration (ie: an 'if all else fails' scenario).
+</para>
+
+<para>
+Lastly, take note that browse lists are a collection of unreliable broadcast
+messages that are repeated at intervals of not more than 15 minutes. This means
+that it will take time to establish a browse list and it can take up to 45
+minutes to stabilise, particularly across network segments.
+</para>
+
+</sect1>
+
+<sect1>
+<title>Use of the "Remote Announce" parameter</title>
+<para>
+The "remote announce" parameter of smb.conf can be used to forcibly ensure
+that all the NetBIOS names on a network get announced to a remote network.
+The syntax of the "remote announce" parameter is:
+<programlisting>
+ remote announce = a.b.c.d [e.f.g.h] ...
+</programlisting>
+_or_
+<programlisting>
+ remote announce = a.b.c.d/WORKGROUP [e.f.g.h/WORKGROUP] ...
+</programlisting>
+
+where:
+<variablelist>
+<varlistentry><term>a.b.c.d and e.f.g.h</term>
+<listitem><para>is either the LMB (Local Master Browser) IP address
+or the broadcst address of the remote network.
+ie: the LMB is at 192.168.1.10, or the address
+could be given as 192.168.1.255 where the netmask
+is assumed to be 24 bits (255.255.255.0).
+When the remote announcement is made to the broadcast
+address of the remote network every host will receive
+our announcements. This is noisy and therefore
+undesirable but may be necessary if we do NOT know
+the IP address of the remote LMB.</para></listitem>
+</varlistentry>
+
+<varlistentry>
+<term>WORKGROUP</term>
+<listitem><para>is optional and can be either our own workgroup
+or that of the remote network. If you use the
+workgroup name of the remote network then our
+NetBIOS machine names will end up looking like
+they belong to that workgroup, this may cause
+name resolution problems and should be avoided.
+</para></listitem>
+
+</variablelist>
+
+</sect1>
+
+<sect1>
+<title>Use of the "Remote Browse Sync" parameter</title>
+
+<para>
+The "remote browse sync" parameter of smb.conf is used to announce to
+another LMB that it must synchronise it's NetBIOS name list with our
+Samba LMB. It works ONLY if the Samba server that has this option is
+simultaneously the LMB on it's network segment.
+</para>
+
+<para>
+The syntax of the "remote browse sync" parameter is:
+<programlisting>
+ remote browse sync = a.b.c.d
+</programlisting>
+
+where a.b.c.d is either the IP address of the remote LMB or else is the network broadcast address of the remote segment.
+</para>
+
+</sect1>
+
+<sect1>
+<title>Use of WINS</title>
+
+<para>
+Use of WINS (either Samba WINS _or_ MS Windows NT Server WINS) is highly
+recommended. Every NetBIOS machine registers it's name together with a
+name_type value for each of of several types of service it has available.
+eg: It registers it's name directly as a unique (the type 0x03) name.
+It also registers it's name if it is running the lanmanager compatible
+server service (used to make shares and printers available to other users)
+by registering the server (the type 0x20) name.
+</para>
+
+<para>
+All NetBIOS names are up to 15 characters in length. The name_type variable
+is added to the end of the name - thus creating a 16 character name. Any
+name that is shorter than 15 characters is padded with spaces to the 15th
+character. ie: All NetBIOS names are 16 characters long (including the
+name_type information).
+</para>
+
+<para>
+WINS can store these 16 character names as they get registered. A client
+that wants to log onto the network can ask the WINS server for a list
+of all names that have registered the NetLogon service name_type. This saves
+broadcast traffic and greatly expedites logon processing. Since broadcast
+name resolution can not be used across network segments this type of
+information can only be provided via WINS _or_ via statically configured
+"lmhosts" files that must reside on all clients in the absence of WINS.
+</para>
+
+<para>
+WINS also serves the purpose of forcing browse list synchronisation by all
+LMB's. LMB's must synchronise their browse list with the DMB (domain master
+browser) and WINS helps the LMB to identify it's DMB. By definition this
+will work only within a single workgroup. Note that the domain master browser
+has NOTHING to do with what is referred to as an MS Windows NT Domain. The
+later is a reference to a security environment while the DMB refers to the
+master controller for browse list information only.
+</para>
+
+<para>
+Use of WINS will work correctly only if EVERY client TCP/IP protocol stack
+has been configured to use the WINS server/s. Any client that has not been
+configured to use the WINS server will continue to use only broadcast based
+name registration so that WINS may NEVER get to know about it. In any case,
+machines that have not registered with a WINS server will fail name to address
+lookup attempts by other clients and will therefore cause workstation access
+errors.
+</para>
+
+<para>
+To configure Samba as a WINS server just add "wins support = yes" to the
+smb.conf file [globals] section.
+</para>
+
+<para>
+To configure Samba to register with a WINS server just add
+"wins server = a.b.c.d" to your smb.conf file [globals] section.
+</para>
+
+<para>
+<emphasis>DO NOT EVER</emphasis> use both "wins support = yes" together with "wins server = a.b.c.d"
+particularly not using it's own IP address.
+</para>
+
+</sect1>
+
+<sect1>
+<title>Do NOT use more than one (1) protocol on MS Windows machines</title>
+
+<para>
+A very common cause of browsing problems results from installing more than
+one protocol on an MS Windows machine.
+</para>
+
+<para>
+Every NetBIOS machine take part in a process of electing the LMB (and DMB)
+every 15 minutes. A set of election criteria is used to determine the order
+of precidence for winning this election process. A machine running Samba or
+Windows NT will be biased so that the most suitable machine will predictably
+win and thus retain it's role.
+</para>
+
+<para>
+The election process is "fought out" so to speak over every NetBIOS network
+interface. In the case of a Windows 9x machine that has both TCP/IP and IPX
+installed and has NetBIOS enabled over both protocols the election will be
+decided over both protocols. As often happens, if the Windows 9x machine is
+the only one with both protocols then the LMB may be won on the NetBIOS
+interface over the IPX protocol. Samba will then lose the LMB role as Windows
+9x will insist it knows who the LMB is. Samba will then cease to function
+as an LMB and thus browse list operation on all TCP/IP only machines will
+fail.
+</para>
+
+<para>
+The safest rule of all to follow it this - USE ONLY ONE PROTOCOL!
+</para>
+
+</sect1>
+
+<sect1>
+<title>Name Resolution Order</title>
+
+<para>
+Resolution of NetBIOS names to IP addresses can take place using a number
+of methods. The only ones that can provide NetBIOS name_type information
+are:
+<simplelist>
+<member>WINS: the best tool!</member>
+<member>LMHOSTS: is static and hard to maintain.</member>
+<member>Broadcast: uses UDP and can not resolve names across remote segments.</member>
+</simplelist>
+</para>
+
+<para>
+Alternative means of name resolution includes:
+<simplelist>
+<member>/etc/hosts: is static, hard to maintain, and lacks name_type info</member>
+<member>DNS: is a good choice but lacks essential name_type info.</member>
+</simplelist>
+</para>
+
+<para>
+Many sites want to restrict DNS lookups and want to avoid broadcast name
+resolution traffic. The "name resolve order" parameter is of great help here.
+The syntax of the "name resolve order" parameter is:
+<programlisting>
+ name resolve order = wins lmhosts bcast host
+</programlisting>
+_or_
+<programlisting>
+ name resolve order = wins lmhosts (eliminates bcast and host)
+</programlisting>
+The default is:
+<programlisting>
+ name resolve order = host lmhost wins bcast
+</programlisting>.
+where "host" refers the the native methods used by the Unix system
+to implement the gethostbyname() function call. This is normally
+controlled by <filename>/etc/host.conf</filename>, <filename>/etc/nsswitch.conf</filename> and <filename>/etc/resolv.conf</filename>.
+</sect1>
+</chapter>