summaryrefslogtreecommitdiff
path: root/docs/guide/Chap01-WindowsNetworkingPrimer.xml
diff options
context:
space:
mode:
Diffstat (limited to 'docs/guide/Chap01-WindowsNetworkingPrimer.xml')
-rw-r--r--docs/guide/Chap01-WindowsNetworkingPrimer.xml1340
1 files changed, 1340 insertions, 0 deletions
diff --git a/docs/guide/Chap01-WindowsNetworkingPrimer.xml b/docs/guide/Chap01-WindowsNetworkingPrimer.xml
new file mode 100644
index 0000000000..893a7629ee
--- /dev/null
+++ b/docs/guide/Chap01-WindowsNetworkingPrimer.xml
@@ -0,0 +1,1340 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [
+
+ <!-- Stuff for xincludes -->
+ <!ENTITY % xinclude SYSTEM "../entities/xinclude.dtd">
+ %xinclude;
+
+ <!-- entities files to use -->
+ <!ENTITY % global_entities SYSTEM '../entities/global.entities'>
+ %global_entities;
+
+]>
+
+<chapter id="primer">
+ <title>Networking Primer</title>
+
+<?latex \pagenumbering{arabic} ?>
+
+ <para>
+ You are about to use the equivalent of a microscope to look at the information
+ that runs through the veins of a Windows network. We do more to observe the information than
+ to interrogate it. When you are done with this chapter, you should have a good understanding
+ of the types of information that flow over the network. Do not worry, this is not
+ a biology lesson. We won't lose you in unnecessary detail. Think to yourself, <quote>This
+ is easy,</quote> then tackle each exercise without fear.
+ </para>
+
+ <para>
+ Samba can be configured with a minimum of complexity. Simplicity should be mastered
+ before you get too deeply into complexities. Let's get moving, we have work to do.
+ </para>
+
+<sect1>
+ <title>Requirements and Notes</title>
+ <para>
+ Successful completion of this chapter requires two Microsoft Windows 9x/Me Workstations,
+ as well as two Microsoft Windows XP Professional Workstations, each equipped with an Ethernet
+ card connected using a hub. Also required is one additional server (either Windows
+ NT4 Server, Windows 2000 Server, or a Samba-3 on UNIX/Linux server) running a network
+ sniffer and analysis application (ethereal is a good choice). All work should be undertaken
+ on a quiet network where there is no other traffic. It is best to use a dedicated hub
+ with only the machines under test connected at the time of the exercises.
+ </para>
+
+ <para><indexterm>
+ <primary>Ethereal</primary>
+ </indexterm>
+ Ethereal has become the network protocol analyzer of choice for many network administrators.
+ You may find more information regarding this tool from the
+ <ulink url="http://www.ethereal.com">Ethereal</ulink> Web site. Ethereal installation
+ files for Windows may be obtained from the Ethereal Web site. Ethereal is provided with
+ SUSE and Red Hat Linux distributions, as well as many other Linux distributions. It may
+ not be installed on your system by default. If it is not installed, you may also need
+ to install the <command>libpcap </command> software before you can install or use Ethereal.
+ Please refer to the instructions for your operating system or to the Ethereal Web site
+ for information regarding the installation and operation of Ethereal.
+ </para>
+
+ <para>
+ To obtain <command>ethereal</command> for your system, please visit the Ethereal
+ <ulink url="http://www.ethereal.com/download.html#binaries">download site.</ulink>
+ </para>
+
+ <note><para>
+ The successful completion of this chapter requires that you capture network traffic
+ using <command>ethereal</command>. It is recommended that you use a hub, not an
+ etherswitch. It is necessary for the device used to act as a repeater, not as a
+ filter. Ethernet switches may filter out traffic that is not directed at the machine
+ that is used to monitor traffic; this would not allow you to complete the projects.
+ </para></note>
+
+ <para>
+ <indexterm><primary>network</primary><secondary>captures</secondary></indexterm>
+ Do not worry too much if you do not have access to all this equipment; network captures
+ from the exercises are provided on the enclosed CD-ROM. This makes it possible to dive directly
+ into the analytical part of the exercises if you so desire.
+ </para>
+
+ <para><indexterm>
+ <primary>network</primary>
+ <secondary>sniffer</secondary>
+ </indexterm><indexterm>
+ <primary>protocol analysis</primary>
+ </indexterm>
+ Please do not be alarmed at the use of a high-powered analysis tool (ethereal) in this
+ first chapter. We expose you only to a minimum of detail necessary to complete
+ the exercises in this chapter. If you choose to use any other network sniffer and protocol
+ analysis tool, be advised that it may not allow you to examine the contents of
+ recently added security protocols used by Windows 200x/XP.
+ </para>
+
+ <para>
+ You could just skim through the exercises and try to absorb the key points made.
+ The exercises provide all the information necessary to convince the die-hard network
+ engineer. You possibly do not require so much convincing and may just want to move on,
+ in which case you should at least read <link linkend="chap01conc"/>.
+ </para>
+
+ <para>
+ <link linkend="chap01qa"/> also provides useful information
+ that may help you to avoid significantly time-consuming networking problems.
+ </para>
+</sect1>
+
+<sect1>
+ <title>Introduction</title>
+
+ <para>
+ The purpose of this chapter is to create familiarity with key aspects of Microsoft Windows
+ network computing. If you want a solid technical grounding, do not gloss over these exercises.
+ The points covered are recurrent issues on the Samba mailing lists.
+ </para>
+
+ <para><indexterm>
+ <primary>network</primary>
+ <secondary>broadcast</secondary>
+ </indexterm>
+ You can see from these exercises that Windows networking involves quite a lot of network
+ broadcast traffic. You can look into the contents of some packets, but only to see
+ some particular information that the Windows client sends to a server in the course of
+ establishing a network connection.
+ </para>
+
+ <para>
+ To many people, browsing is everything that happens when one uses Microsoft Internet Explorer.
+ It is only when you start looking at network traffic and noting the protocols
+ and types of information that are used that you can begin to appreciate the complexities of
+ Windows networking and, more importantly, what needs to be configured so that it can work.
+ Detailed information regarding browsing is provided in the recommended
+ preparatory reading.
+ </para>
+
+ <para>
+ Recommended preparatory reading: <emphasis>The Official Samba-3 HOWTO and Reference Guide</emphasis> (TOSHARG)
+ Chapter 9, <quote>Network Browsing,</quote> and Chapter 3, <quote>Server Types and
+ Security Modes.</quote>
+ </para>
+
+ <sect2>
+ <title>Assignment Tasks</title>
+
+ <para><indexterm>
+ <primary>browsing</primary>
+ </indexterm>
+ You are about to witness how Microsoft Windows computer networking functions. The
+ exercises step through identification of how a client machine establishes a
+ connection to a remote Windows server. You observe how Windows machines find
+ each other (i.e., how browsing works), and how the two key types of user identification
+ (share mode security and user mode security) are affected.
+ </para>
+
+ <para><indexterm>
+ <primary>network</primary>
+ <secondary>analyzer</secondary>
+ </indexterm>
+ The networking protocols used by MS Windows networking when working with Samba
+ use TCP/IP as the transport protocol. The protocols that are specific to Windows
+ networking are encapsulated in TCP/IP. The network analyzer we use (ethereal)
+ is able to show you the contents of the TCP/IP packets (or messages).
+ </para>
+
+ <procedure id="chap01tasks">
+ <title>Chapter 1 &smbmdash; Tasks</title>
+
+ <step><para><indexterm>
+ <primary>network</primary>
+ <secondary>trace</secondary>
+ </indexterm><indexterm>
+ <primary>host announcement</primary>
+ </indexterm><indexterm>
+ <primary>name resolution</primary>
+ </indexterm>
+ Examine network traces to witness SMB broadcasts, host announcements,
+ and name resolution processes.
+ </para></step>
+
+ <step><para>
+ Examine network traces to witness how share mode security functions.
+ </para></step>
+
+ <step><para>
+ Examine network traces to witness the use of user mode security.
+ </para></step>
+
+ <step><para>
+ Review traces of network logons for a Windows 9x/Me client as well as
+ a Domain logon for a Windows XP Professional client.
+ </para></step>
+ </procedure>
+
+ </sect2>
+</sect1>
+
+<sect1>
+ <title>Exercises</title>
+
+ <para>
+ <indexterm><primary>ethereal</primary></indexterm>
+ You are embarking on a course of discovery. The first part of the exercise requires
+ two MS Windows 9x/Me systems. We called one machine <constant>WINEPRESSME</constant> and the
+ other <constant>MILGATE98</constant>. Each needs an IP address; we used <literal>10.1.1.10</literal>
+ and <literal>10.1.1.11</literal>. The test machines need to be networked via a <emphasis>hub</emphasis>. A UNIX/Linux
+ machine is required to run <command>ethereal</command> to enable the network activity to be captured.
+ It is important that the machine from which network activity is captured must not interfere with
+ the operation of the Windows workstations. It is helpful for this machine to be passive (does not
+ send broadcast information) to the network.
+ </para>
+
+ <para>
+ For these exercises, our test environment consisted of a SUSE 8.2 Professional Linux Workstation running
+ VMWare 3.2. The following VMWare images were prepared:
+ </para>
+
+ <itemizedlist>
+ <listitem><para>Windows 98 &smbmdash; name: MILGATE98.</para></listitem>
+ <listitem><para>Windows Me &smbmdash; name: WINEPRESSME.</para></listitem>
+ <listitem><para>Windows XP Professional &smbmdash; name: LightrayXP.</para></listitem>
+ <listitem><para>Samba-3.0.2 running on a SUSE Enterprise Linux 8.0 machine.</para></listitem>
+ </itemizedlist>
+
+ <para>
+ Choose a workgroup name (MIDEARTH) for each exercise.
+ </para>
+
+ <para>
+ <indexterm><primary>ethereal</primary></indexterm>
+ The network captures provided on the CD-ROM at the back of this book were captured using <constant>ethereal</constant>
+ version <literal>0.9.10</literal>. A later version suffices without problems, but an earlier version may not
+ expose all the information needed. Each capture file has been decoded and listed as a trace file. A summary of all
+ packets has also been included. This makes it possible for you to do all the studying you like without the need to
+ perform the time-consuming equipment configuration and test work. This is a good time to point out the value
+ that can be derived from this book really does warrant your taking sufficient time to practice each exercise with
+ care and attention to detail.
+ </para>
+
+ <sect2>
+ <title>Single Machine Broadcast Activity</title>
+
+ <para>
+ In this section, we start a single Windows 9x/Me machine, then monitor network activity for 30 minutes.
+ </para>
+
+ <procedure>
+ <step><para>
+ Start the machine from which network activity will be monitored (using <command>ethereal</command>).
+ Launch <command>ethereal</command>, click
+ <menuchoice>
+ <guimenu>Capture</guimenu>
+ <guimenuitem>Start</guimenuitem>
+ </menuchoice>.
+ </para>
+
+ <para>
+ Click the following:
+ <orderedlist>
+ <listitem>Update list of packets in real time</listitem>
+ <listitem>Automatic scrolling in live capture</listitem>
+ <listitem>Enable MAC name resolution </listitem>
+ <listitem>Enable network name resolution </listitem>
+ <listitem>Enable transport name resolution</listitem>
+ </orderedlist>
+ Click <guibutton>OK</guibutton>.
+ </para></step>
+
+ <step><para>
+ Start the Windows 9x/Me machine to be monitored. Let it run for a full 30 minutes. While monitoring,
+ do not press any keyboard keys, do not click any on-screen icons or menus; and do not answer any dialog boxes.
+ </para></step>
+
+ <step><para>
+ At the conclusion of 30 minutes, stop the capture. Save the capture to a file so you can go back to it later.
+ Leave this machine running in preparation for the task in <link linkend="secondmachine"/>.
+ </para></step>
+
+ <step><para>
+ Analyze the capture. Identify each discrete message type that was captured. Note what transport protocol
+ was used. Identify the timing between messages of identical types.
+ </para></step>
+
+ </procedure>
+
+ <sect3>
+ <title>Findings</title>
+
+ <para>
+ The summary of the first 10 minutes of the packet capture should look like <link linkend="pktcap01"/>.
+ A screenshot of a later stage of the same capture is shown in <link linkend="pktcap02"/>.
+ </para>
+
+<figure id="pktcap01">
+ <title>Windows Me &smbmdash; Broadcasts &smbmdash; The First 10 Minutes</title>
+ <mediaobject>
+ <imageobject role="latex">
+ <imagedata fileref="guide/images/WINREPRESSME-Capture.png" scale="53" scalefit="1"/>
+ </imageobject>
+ <imageobject>
+ <imagedata fileref="guide/images/WINREPRESSME-Capture.png" scale="53" scalefit="1"/>
+ </imageobject>
+ </mediaobject>
+</figure>
+
+<figure id="pktcap02">
+ <title>Windows Me &smbmdash; Later Broadcast Sample</title>
+ <mediaobject>
+ <imageobject role="latex">
+ <imagedata fileref="guide/images/WINREPRESSME-Capture2.png" scale="57" scalefit="1"/>
+ </imageobject>
+ <imageobject>
+ <imagedata fileref="guide/images/WINREPRESSME-Capture2.png" scale="57" scalefit="1"/>
+ </imageobject>
+ </mediaobject>
+</figure>
+
+ <para><indexterm>
+ <primary>Local Master Browser</primary>
+ <see>LMB</see>
+ </indexterm><indexterm>
+ <primary>LMB</primary>
+ </indexterm>
+ Broadcast messages observed are shown in <link linkend="capsstats01"/>.
+ Actual observations vary a little, but not by much.
+ Early in the startup process, the Windows Me machine broadcasts its name for two reasons;
+ first to ensure that its name would not result in a name clash, and second to establish its
+ presence with the Local Master Browser (LMB).
+ </para>
+
+ <table id="capsstats01">
+ <title>Windows Me &smbmdash; Startup Broadcast Capture Statistics</title>
+ <tgroup cols="4">
+ <colspec align="left" colwidth="3*"/>
+ <colspec align="center"/>
+ <colspec align="center"/>
+ <colspec align="left" colwidth="3*"/>
+ <thead>
+ <row>
+ <entry>Message</entry>
+ <entry>Type</entry>
+ <entry>Num</entry>
+ <entry>Notes</entry>
+ </row>
+ </thead>
+ <tbody>
+ <row>
+ <entry>WINEPRESSME&lt;00&gt;</entry>
+ <entry>Reg</entry>
+ <entry>8</entry>
+ <entry>4 lots of 2, 0.6 sec apart.</entry>
+ </row>
+ <row>
+ <entry>WINEPRESSME&lt;03&gt;</entry>
+ <entry>Reg</entry>
+ <entry>8</entry>
+ <entry>4 lots of 2, 0.6 sec apart.</entry>
+ </row>
+ <row>
+ <entry>WINEPRESSME&lt;20&gt;</entry>
+ <entry>Reg</entry>
+ <entry>8</entry>
+ <entry>4 lots of 2, 0.75 sec apart.</entry>
+ </row>
+ <row>
+ <entry>MIDEARTH&lt;00&gt;</entry>
+ <entry>Reg</entry>
+ <entry>8</entry>
+ <entry>4 lots of 2, 0.75 sec apart.</entry>
+ </row>
+ <row>
+ <entry>MIDEARTH&lt;1d&gt;</entry>
+ <entry>Reg</entry>
+ <entry>8</entry>
+ <entry>4 lots of 2, 0.75 sec apart.</entry>
+ </row>
+ <row>
+ <entry>MIDEARTH&lt;1e&gt;</entry>
+ <entry>Reg</entry>
+ <entry>8</entry>
+ <entry>4 lots of 2, 0.75 sec apart.</entry>
+ </row>
+ <row>
+ <entry>MIDEARTH&lt;1b&gt;</entry>
+ <entry>Qry</entry>
+ <entry>84</entry>
+ <entry>300 sec apart at stable operation.</entry>
+ </row>
+ <row>
+ <entry>__MSBROWSE__</entry>
+ <entry>Reg</entry>
+ <entry>8</entry>
+ <entry>Registered after winning election to Browse Master.</entry>
+ </row>
+ <row>
+ <entry>JHT&lt;03&gt;</entry>
+ <entry>Reg</entry>
+ <entry>8</entry>
+ <entry>4 x 2. This is the name of the user that logged onto Windows.</entry>
+ </row>
+ <row>
+ <entry>Host Announcement WINEPRESSME</entry>
+ <entry>Ann</entry>
+ <entry>2</entry>
+ <entry>Observed at 10 sec.</entry>
+ </row>
+ <row>
+ <entry>Domain/Workgroup Announcement MIDEARTH</entry>
+ <entry>Ann</entry>
+ <entry>18</entry>
+ <entry>300 sec apart at stable operation.</entry>
+ </row>
+ <row>
+ <entry>Local Master Announcement WINEPRESSME</entry>
+ <entry>Ann</entry>
+ <entry>18</entry>
+ <entry>300 sec apart at stable operation.</entry>
+ </row>
+ <row>
+ <entry>Get Backup List Request</entry>
+ <entry>Qry</entry>
+ <entry>12</entry>
+ <entry>6 x 2 early in startup, 0.5 sec apart.</entry>
+ </row>
+ <row>
+ <entry>Browser Election Request</entry>
+ <entry>Ann</entry>
+ <entry>10</entry>
+ <entry>5 x 2 early in startup.</entry>
+ </row>
+ <row>
+ <entry>Request Announcement WINEPRESSME</entry>
+ <entry>Ann</entry>
+ <entry>4</entry>
+ <entry>Early in startup.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <para><indexterm>
+ <primary>election</primary>
+ </indexterm><indexterm>
+ <primary>browse master</primary>
+ </indexterm>
+ From the packet trace, it should be noted that no messages were propagated over TCP/IP;
+ all employed UDP/IP. When steady state operation has been achieved, there is a cycle
+ of various announcements, re-election of a browse master, and name queries. These create
+ the symphony of announcements by which network browsing is made possible.
+ </para>
+
+ <para><indexterm>
+ <primary>CIFS</primary>
+ </indexterm>
+ For detailed information regarding the precise behavior of the CIFS/SMB protocols, the
+ reader is referred to the book <quote>Implementing CIFS: The Common Internet File System,</quote>
+ by Christopher Hertel, Publisher: Prentice Hall PTR, ISBN: 013047116X.
+ </para>
+
+ </sect3>
+
+ </sect2>
+
+ <sect2 id="secondmachine">
+ <title>Second Machine Startup Broadcast Interaction</title>
+
+ <para>
+ At this time, the machine you used to capture the single system startup trace should still be running.
+ The objective of this task is to identify the interaction of two machines in respect to broadcast activity.
+ </para>
+
+ <procedure>
+ <step><para>
+ On the machine from which network activity will be monitored (using <command>ethereal</command>),
+ launch <command>ethereal</command> and click
+ <menuchoice>
+ <guimenu>Capture</guimenu>
+ <guimenuitem>Start</guimenuitem>
+ </menuchoice>.
+ </para>
+
+ <para>
+ Click:
+ <orderedlist>
+ <listitem>Update list of packets in real time</listitem>
+ <listitem>Automatic scrolling in live capture</listitem>
+ <listitem>Enable MAC name resolution </listitem>
+ <listitem>Enable network name resolution </listitem>
+ <listitem>Enable transport name resolution</listitem>
+ </orderedlist>
+ Click <guibutton>OK</guibutton>.
+ </para></step>
+
+ <step><para>
+ Start the second Windows 9x/Me machine. Let it run for 15-20 minutes. While monitoring, do not press
+ any keyboard keys, do not click any on-screen icons or menus, and do not answer any dialog boxes.
+ </para></step>
+
+ <step><para>
+ At the conclusion of the capture time, stop the capture. Be sure to save the captured data so you
+ can examine the network data capture again at a later date should that be necessary.
+ </para></step>
+
+ <step><para>
+ Analyze the capture trace, taking note of the transport protocols used, the types of messages observed,
+ and what interaction took place between the two machines. Leave both machines running for the next task.
+ </para></step>
+ </procedure>
+
+ <sect3>
+ <title>Findings</title>
+
+ <para>
+ <link linkend="capsstats02"/> summarizes capture statistics observed. As in the previous case,
+ all announcements used UDP/IP broadcasts. Also, as was observed with the last example, the second
+ Windows 9x/Me machine broadcasts its name on startup to ensure that there exists no name clash
+ (i.e., the name is already registered by another machine) on the network segment. Those wishing
+ to explore the inner details of the precise mechanism of how this functions should refer to
+ the book <quote>Implementing CIFS: The Common Internet File System,</quote> referred to previously.
+ </para>
+
+ <table id="capsstats02">
+ <title>Second Machine (Windows 98) &smbmdash; Capture Statistics</title>
+ <tgroup cols="4">
+ <colspec align="left" colwidth="3*"/>
+ <colspec align="center"/>
+ <colspec align="center"/>
+ <colspec align="left" colwidth="3*"/>
+ <thead>
+ <row>
+ <entry>Message</entry>
+ <entry>Type</entry>
+ <entry>Num</entry>
+ <entry>Notes</entry>
+ </row>
+ </thead>
+ <tbody>
+ <row>
+ <entry>MILGATE98&lt;00&gt;</entry>
+ <entry>Reg</entry>
+ <entry>8</entry>
+ <entry>4 lots of 2, 0.6 sec apart.</entry>
+ </row>
+ <row>
+ <entry>MILGATE98&lt;03&gt;</entry>
+ <entry>Reg</entry>
+ <entry>8</entry>
+ <entry>4 lots of 2, 0.6 sec apart.</entry>
+ </row>
+ <row>
+ <entry>MILGATE98&lt;20&gt;</entry>
+ <entry>Reg</entry>
+ <entry>8</entry>
+ <entry>4 lots of 2, 0.75 sec apart.</entry>
+ </row>
+ <row>
+ <entry>MIDEARTH&lt;00&gt;</entry>
+ <entry>Reg</entry>
+ <entry>8</entry>
+ <entry>4 lots of 2, 0.75 sec apart.</entry>
+ </row>
+ <row>
+ <entry>MIDEARTH&lt;1d&gt;</entry>
+ <entry>Reg</entry>
+ <entry>8</entry>
+ <entry>4 lots of 2, 0.75 sec apart.</entry>
+ </row>
+ <row>
+ <entry>MIDEARTH&lt;1e&gt;</entry>
+ <entry>Reg</entry>
+ <entry>8</entry>
+ <entry>4 lots of 2, 0.75 sec apart.</entry>
+ </row>
+ <row>
+ <entry>MIDEARTH&lt;1b&gt;</entry>
+ <entry>Qry</entry>
+ <entry>18</entry>
+ <entry>900 sec apart at stable operation.</entry>
+ </row>
+ <row>
+ <entry>JHT&lt;03&gt;</entry>
+ <entry>Reg</entry>
+ <entry>2</entry>
+ <entry>This is the name of the user that logged onto Windows.</entry>
+ </row>
+ <row>
+ <entry>Host Announcement MILGATE98</entry>
+ <entry>Ann</entry>
+ <entry>14</entry>
+ <entry>Every 120 sec.</entry>
+ </row>
+ <row>
+ <entry>Domain/Workgroup Announcement MIDEARTH</entry>
+ <entry>Ann</entry>
+ <entry>6</entry>
+ <entry>900 sec apart at stable operation.</entry>
+ </row>
+ <row>
+ <entry>Local Master Announcement WINEPRESSME</entry>
+ <entry>Ann</entry>
+ <entry>6</entry>
+ <entry>Insufficient detail to determine frequency.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <para>
+ <indexterm><primary>host announcement</primary></indexterm>
+ <indexterm><primary>Local Master Announcement</primary></indexterm>
+ <indexterm><primary>Workgroup Announcement</primary></indexterm>
+ Observation of the contents of Host Announcements, Domain/Workgroup Announcements,
+ and Local Master Announcements is instructive. These messages convey a significant
+ level of detail regarding the nature of each machine that is on the network. An example
+ dissection of a Host Announcement is given in <link linkend="hostannounce"/>.
+ </para>
+
+ </sect3>
+
+<figure id="hostannounce">
+ <title>Typical Windows 9x/Me Host Announcement</title>
+ <mediaobject>
+ <imageobject role="latex">
+ <imagedata fileref="guide/images/HostAnnouncment.png" scale="55" scalefit="1"/>
+ </imageobject>
+ <imageobject>
+ <imagedata fileref="guide/images/HostAnnouncment.png" scale="55" scalefit="1"/>
+ </imageobject>
+ </mediaobject>
+</figure>
+
+ </sect2>
+
+ <sect2>
+ <title>Simple Windows Client Connection Characteristics</title>
+
+ <para>
+ The purpose of this exercise is to discover how Microsoft Windows clients create (establish)
+ connections with remote servers. The methodology involves analysis of a key aspect of how
+ Windows clients access remote servers: the session setup protocol.
+ </para>
+
+ <procedure>
+ <step><para>
+ Configure a Windows 9x/Me machine (MILGATE98) with a share called <constant>Stuff</constant>.
+ Create a <parameter>Full Access</parameter> control password on this share.
+ </para></step>
+
+ <step><para>
+ Configure another Windows 9x/Me machine (WINEPRESSME) as a client. Make sure that it exports
+ no shared resources.
+ </para></step>
+
+ <step><para>
+ Start both Windows 9x/Me machines and allow them to stabilize for 10 minutes. Log on to both
+ machines using a user name (JHT) of your choice. Wait approximately two minutes before proceeding.
+ </para></step>
+
+ <step><para>
+ Start ethereal (or the network sniffer of your choice).
+ </para></step>
+
+ <step><para>
+ From the WINEPRESSME machine, right-click <guimenu>Network Neighborhood</guimenu>, select
+ <guimenuitem>Explore</guimenuitem>, select
+ <menuchoice>
+ <guimenuitem>My Network Places</guimenuitem>
+ <guimenuitem>Entire Network</guimenuitem>
+ <guimenuitem>MIDEARTH</guimenuitem>
+ <guimenuitem>MILGATE98</guimenuitem>
+ <guimenuitem>Stuff</guimenuitem>
+ </menuchoice>.
+ Enter the password you set for the <constant>Full Control</constant> mode for the
+ <constant>Stuff</constant> share.
+ </para></step>
+
+ <step><para>
+ When the share called <constant>Stuff</constant> is being displayed, stop the capture.
+ Save the captured data in case it is needed for later analysis.
+ </para></step>
+
+ <step><para>
+ <indexterm><primary>session setup</primary></indexterm>
+ From the top of the packets captured, scan down to locate the first packet that has
+ interpreted as <constant>Session Setup AndX, User: anonymous; Tree Connect AndX,
+ Path: \\MILGATE98\IPC$</constant>.
+ </para></step>
+
+ <step><para><indexterm>
+ <primary>Session Setup</primary>
+ </indexterm><indexterm>
+ <primary>Tree Connect</primary>
+ </indexterm>
+ In the dissection (analysis) panel, expand the <constant>SMB, Session Setup AndX Request,
+ and Tree Connect AndX Request</constant>. Examine both operations. Identify the name of
+ the user Account and what password was used. The Account name should be empty.
+ This is a <constant>NULL</constant> session setup packet.
+ </para></step>
+
+ <step><para>
+ Return to the packet capture sequence. There will be a number of packets that have been
+ decoded of the type <constant>Session Setup AndX</constant>. Locate the last such packet
+ that was targeted at the <constant>\\MILGATE98\IPC$</constant> service.
+ </para></step>
+
+ <step><para>
+ <indexterm><primary>password length</primary></indexterm>
+ <indexterm><primary>User Mode</primary></indexterm>
+ Dissect this packet as per the one above. This packet should have a password length
+ of 24 (characters) and should have a password field, the contents of which is a
+ long hexadecimal number. Observe the name in the Account field. This is a User Mode
+ session setup packet.
+ </para></step>
+ </procedure>
+
+ <sect3>
+ <title>Findings and Comments</title>
+
+ <para>
+ <indexterm><primary>IPC$</primary></indexterm>
+ The <constant>IPC$</constant> share serves a vital purpose<footnote>TOSHARG, Sect 4.5.1</footnote>
+ in SMB/CIFS based networking. A Windows client connects to this resource to obtain the list of
+ resources that are available on the server. The server responds with the shares and print queues that
+ are available. In most but not all cases, the connection is made with a <constant>NULL</constant>
+ username and a <constant>NULL</constant> password.
+ </para>
+
+ <para>
+ <indexterm><primary>account credentials</primary></indexterm>
+ The two packets examined are material evidence with respect to how Windows clients may
+ interoperate with Samba. Samba requires every connection setup to be authenticated using
+ valid UNIX account credentials (UID/GID). This means that even a <constant>NULL</constant>
+ session setup can be established only by automatically mapping it to a valid UNIX
+ account.
+ </para>
+
+ <para>
+ <indexterm><primary>NULL session</primary></indexterm><indexterm>
+ <primary>guest account</primary>
+ </indexterm>
+ <indexterm><primary>nobody</primary></indexterm>
+ Samba has a special name for the <constant>NULL</constant>, or empty, user account.
+ It calls that the <smbconfoption><name>guest account</name></smbconfoption>. The
+ default value of this parameter is <constant>nobody</constant>; however, this can be
+ changed to map the function of the guest account to any other UNIX identity. Some
+ UNIX administrators prefer to map this account to the system default anonymous
+ FTP account. A sample NULL Session Setup AndX packet dissection is shown in
+ <link linkend="nullconnect"/>.
+ </para>
+
+<figure id="nullconnect">
+ <title>Typical Windows 9x/Me NULL SessionSetUp AndX Request</title>
+ <mediaobject>
+ <imageobject role="latex">
+ <imagedata fileref="guide/images/NullConnect.png" scale="65" scalefit="1"/>
+ </imageobject>
+ <imageobject>
+ <imagedata fileref="guide/images/NullConnect.png" scale="65" scalefit="1"/>
+ </imageobject>
+ </mediaobject>
+</figure>
+
+ <para>
+ <indexterm><primary>nobody</primary></indexterm>
+ <indexterm><primary>/etc/passwd</primary></indexterm>
+ <indexterm><primary>guest account</primary></indexterm>
+ When a UNIX/Linux system does not have a <constant>nobody</constant> user account
+ (<filename>/etc/passwd</filename>), the operation of the <constant>NULL</constant>
+ account cannot validate and thus connections that utilize the guest account
+ fail. This breaks all ability to browse the Samba server and is a common
+ problem reported on the Samba mailing list. A sample User Mode Session Setup AndX
+ is shown in <link linkend="userconnect"/>.
+ </para>
+
+<figure id="userconnect">
+ <title>Typical Windows 9x/Me User SessionSetUp AndX Request</title>
+ <mediaobject>
+ <imageobject role="latex">
+ <imagedata fileref="guide/images/UserConnect.png" scale="65" scalefit="1"/>
+ </imageobject>
+ <imageobject>
+ <imagedata fileref="guide/images/UserConnect.png" scale="65" scalefit="1"/>
+ </imageobject>
+ </mediaobject>
+</figure>
+
+ <para>
+ <indexterm><primary>encrypted</primary></indexterm>
+ The User Mode connection packet contains the account name and the domain name.
+ The password is provided in Microsoft encrypted form, and its length is shown
+ as 24 characters. This is the length of Microsoft encrypted passwords.
+ </para>
+
+ </sect3>
+
+ </sect2>
+
+ <sect2>
+ <title>Windows 200x/XP Client Interaction with Samba-3</title>
+
+ <para>
+ By now you may be asking, <quote>Why did you choose to work with Windows 9x/Me?</quote>
+ </para>
+
+ <para>
+ First, we want to demonstrate the simple case. This book is not intended to be a detailed treatise
+ on the Windows networking protocols, but rather to provide prescriptive guidance for deployment of Samba.
+ Second, by starting out with the simple protocol, it can be demonstrated that the more complex case mostly
+ follows the same principles.
+ </para>
+
+ <para>
+ The following exercise demonstrates the case that even MS Windows XP Professional with up-to-date service
+ updates also uses the <constant>NULL</constant> account, as well as user accounts. Simply follow the procedure
+ to complete this exercise.
+ </para>
+
+ <para>
+ To complete this exercise, you need a Windows XP Professional client that has been configured as
+ a Domain Member of either a Samba controlled domain or a Windows NT4 or 200x Active Directory domain.
+ Here we do not provide details for how to configure this, as full coverage is provided later in this book.
+ </para>
+
+ <procedure>
+
+ <step><para>
+ Start your Domain Controller. Also, start the ethereal monitoring machine, launch ethereal,
+ and then wait for the next step to complete.
+ </para></step>
+
+ <step><para>
+ Start the Windows XP Client and wait five minutes before proceeding.
+ </para></step>
+
+ <step><para>
+ On the machine from which network activity will be monitored (using <command>ethereal</command>),
+ launch <command>ethereal</command> and click
+ <menuchoice>
+ <guimenu>Capture</guimenu>
+ <guimenuitem>Start</guimenuitem>
+ </menuchoice>.
+ </para>
+
+ <para>
+ Click:
+ <orderedlist>
+ <listitem>Update list of packets in real time</listitem>
+ <listitem>Automatic scrolling in live capture</listitem>
+ <listitem>Enable MAC name resolution </listitem>
+ <listitem>Enable network name resolution </listitem>
+ <listitem>Enable transport name resolution</listitem>
+ </orderedlist>
+ Click <guibutton>OK</guibutton>.
+ </para></step>
+
+ <step><para>
+ On the Windows XP Professional client: Press <guimenu>Ctrl-Alt-Delete</guimenu> to bring
+ up the domain logon screen. Log in using valid credentials for a domain user account.
+ </para></step>
+
+ <step><para>
+ Now proceed to connect to the Domain Controller as follows:
+ <menuchoice>
+ <guimenu>Start</guimenu>
+ <guimenuitem>(right-click) My Network Places</guimenuitem>
+ <guimenuitem>Explore</guimenuitem>
+ <guimenuitem>{Left Panel} [+] Entire Network</guimenuitem>
+ <guimenuitem>{Left Panel} [+] Microsoft Windows Network</guimenuitem>
+ <guimenuitem>{Left Panel} [+] Midearth</guimenuitem>
+ <guimenuitem>{Left Panel} [+] Frodo</guimenuitem>
+ <guimenuitem>{Left Panel} [+] data</guimenuitem>
+ </menuchoice>. Close the explorer window.
+ </para>
+
+ <para>
+ In this step, our domain name is <constant>Midearth</constant>, the domain controller is called
+ <constant>Frodo</constant>, and we have connected to a share called <constant>data</constant>.
+ </para></step>
+
+ <step><para>
+ Stop the capture on the <command>ethereal</command> monitoring machine. Be sure to save the captured data
+ to a file so that you can refer to it again later.
+ </para></step>
+
+ <step><para>
+ If desired, the Windows XP Professional client and the Domain Controller are no longer needed for exercises
+ in this chapter.
+ </para></step>
+
+ <step><para>
+ <indexterm><primary>NTLMSSP_AUTH</primary></indexterm>
+ <indexterm><primary>session setup</primary></indexterm>
+ From the top of the packets captured, scan down to locate the first packet that has
+ interpreted as <constant>Session Setup AndX Request, NTLMSSP_AUTH</constant>.
+ </para></step>
+
+ <step><para>
+ <indexterm><primary>GSS-API</primary></indexterm>
+ <indexterm><primary>SPNEGO</primary></indexterm>
+ <indexterm><primary>NTLMSSP</primary></indexterm>
+ In the dissection (analysis) panel, expand the <constant>SMB, Session Setup AndX Request</constant>.
+ Expand the packet decode information, beginning at the <constant>Security Blob:</constant>
+ entry. Expand the <constant>GSS-API -> SPNEGO -> netTokenTarg -> responseToken -> NTLMSSP</constant>
+ keys. This should reveal that this is a <constant>NULL</constant> session setup packet.
+ The <constant>User name: NULL</constant> indicates this. An example decode is shown in
+ <link linkend="XPCap01"/>.
+ </para></step>
+
+ <step><para>
+ Return to the packet capture sequence. There will be a number of packets that have been
+ decoded of the type <constant>Session Setup AndX Request</constant>. Click the last such packet that
+ has been decoded as <constant>Session Setup AndX Request, NTLMSSP_AUTH</constant>.
+ </para></step>
+
+ <step><para>
+ <indexterm><primary>encrypted password</primary></indexterm>
+ In the dissection (analysis) panel, expand the <constant>SMB, Session Setup AndX Request</constant>.
+ Expand the packet decode information, beginning at the <constant>Security Blob:</constant>
+ entry. Expand the <constant>GSS-API -> SPNEGO -> netTokenTarg -> responseToken -> NTLMSSP</constant>
+ keys. This should reveal that this is a <constant>User Mode</constant> session setup packet.
+ The <constant>User name: jht</constant> indicates this. An example decode is shown in
+ <link linkend="XPCap02"/>. In this case the user name was <constant>jht</constant>. This packet
+ decode includes the <constant>Lan Manager Response:</constant> and the <constant>NTLM Response:</constant>.
+ The value of these two parameters is the Microsoft encrypted password hashes, respectively, the LanMan
+ password and then the NT (case-preserving) password hash.
+ </para></step>
+
+ <step><para>
+ <indexterm><primary>password length</primary></indexterm>
+ <indexterm><primary>User Mode</primary></indexterm>
+ The passwords are 24 characters long hexadecimal numbers. This packet confirms that this is a User Mode
+ session setup packet.
+ </para></step>
+
+ </procedure>
+
+<figure id="XPCap01">
+ <title>Typical Windows XP NULL Session Setup AndX Request</title>
+ <mediaobject>
+ <imageobject role="latex">
+ <imagedata fileref="guide/images/WindowsXP-NullConnection.png" scale="70" scalefit="1"/>
+ </imageobject>
+ <imageobject>
+ <imagedata fileref="guide/images/WindowsXP-NullConnection.png" scale="70" scalefit="1"/>
+ </imageobject>
+ </mediaobject>
+</figure>
+
+<figure id="XPCap02">
+ <title>Typical Windows XP User Session Setup AndX Request</title>
+ <mediaobject>
+ <imageobject role="latex">
+ <imagedata fileref="guide/images/WindowsXP-UserConnection.png" scale="70" scalefit="1"/>
+ </imageobject>
+ <imageobject>
+ <imagedata fileref="guide/images/WindowsXP-UserConnection.png" scale="70" scalefit="1"/>
+ </imageobject>
+ </mediaobject>
+</figure>
+
+ <sect3>
+ <title>Discussion</title>
+
+ <para><indexterm>
+ <primary>NULL-Session</primary>
+ </indexterm>
+ This exercise demonstrates that, while the specific protocol for the Session Setup AndX is handled
+ in a more sophisticated manner by recent MS Windows clients, the underlying rules or principles
+ remain the same. Thus it is demonstrated that MS Windows XP Professional clients still use a
+ <constant>NULL-Session</constant> connection to query and locate resources on an advanced network
+ technology server (one using Windows NT4/200x or Samba). It also demonstrates that an authenticated
+ connection must be made before resources can be used.
+ </para>
+
+ </sect3>
+
+ </sect2>
+
+ <sect2>
+ <title>Conclusions to Exercises</title>
+
+ <para>
+ In summary, the following points have been established in this chapter:
+ </para>
+
+ <itemizedlist>
+ <listitem><para>
+ When NetBIOS over TCP/IP protocols are enabled, MS Windows networking employs broadcast
+ oriented messaging protocols to provide knowledge of network services.
+ </para></listitem>
+
+ <listitem><para>
+ Network browsing protocols query information stored on Browse Masters that manage
+ information provided by NetBIOS Name Registrations and by way of on-going Host
+ Announcements and Workgroup Announcements.
+ </para></listitem>
+
+ <listitem><para>
+ All Samba servers must be configured with a mechanism for mapping the <constant>NULL-Session</constant>
+ to a valid but non-privileged UNIX system account.
+ </para></listitem>
+
+ <listitem><para>
+ The use of Microsoft encrypted passwords is built right into the fabric of Windows
+ networking operations. Such passwords cannot be provided from the UNIX <filename>/etc/passwd</filename>
+ database and thus must be stored elsewhere on the UNIX system in a manner that Samba can
+ use. Samba-2.x permitted such encrypted passwords to be stored in the <constant>smbpasswd</constant>
+ file or in an LDAP database. Samba-3 permits that use of multiple different <parameter>passdb backend</parameter>
+ databases, in concurrent deploy. Refer to <emphasis>TOSHARG</emphasis>, Chapter 10, <quote>Account Information Databases.</quote>
+ </para></listitem>
+ </itemizedlist>
+
+ </sect2>
+
+</sect1>
+
+<sect1 id="chap01conc">
+ <title>Dissection and Discussion</title>
+
+ <para>
+ <indexterm><primary>guest account</primary></indexterm>
+ The exercises demonstrate the use of the <constant>guest</constant> account, the way that
+ MS Windows clients and servers resolve computer names to a TCP/IP address, and how connections
+ between a client and a server are established.
+ </para>
+
+ <para>
+ Those wishing background information regarding NetBIOS name types should refer to
+ the Microsoft Knowledge Base Article
+ <ulink url="http://support.microsoft.com/support/kb/articles/Q102/78/8.asp">Q102878.</ulink>
+ </para>
+
+ <sect2>
+ <title>Technical Issues</title>
+
+ <para>
+ <indexterm><primary>guest account</primary></indexterm>
+ Network browsing involves SMB broadcast announcements, SMB enumeration requests,
+ connections to the <constant>IPC$</constant> share, share enumerations, and SMB connection
+ setup processes. The use of anonymous connections to a Samba server involve the use of
+ the <parameter>guest account</parameter> that must map to a valid UNIX UID.
+ </para>
+
+ </sect2>
+
+</sect1>
+
+<sect1 id="chap01qa">
+ <title>Questions and Answers</title>
+
+ <para>
+ The questions and answers given in this section are designed to highlight important aspects of Microsoft
+ Windows networking.
+ </para>
+
+ <qandaset defaultlabel="chap01qa" type="number">
+ <qandaentry>
+ <question>
+
+ <para>
+ What is the significance of the MIDEARTH&lt;1b&gt; type query?
+ </para>
+
+ </question>
+ <answer>
+
+ <para>
+ <indexterm><primary>Domain Master Browser</primary><see>DMB</see></indexterm>
+ <indexterm><primary>DMB</primary></indexterm>
+ This is a broadcast announcement by which the Windows machine is attempting to
+ locate a Domain Master Browser (DMB) in the event that it might exist on the network.
+ Refer to <emphasis>TOSHARG</emphasis> Chapter 9, Section 9.7, <quote>Technical Overview of Browsing</quote>
+ for details regarding the function of the DMB and its role in network browsing.
+ </para>
+
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+
+ <para>
+ What is the significance of the MIDEARTH&lt;1d&gt; type name registration?
+ </para>
+
+ </question>
+ <answer>
+
+ <para>
+ <indexterm><primary>Local Master Browser</primary><see>LMB</see></indexterm>
+ <indexterm><primary>LMB</primary></indexterm>
+ This name registration records the machine IP addresses of the Local Master Browsers (LMBs).
+ Network clients can query this name type to obtain a list of browser servers from the
+ Master Browser.
+ </para>
+
+ <para>
+ The LMB is responsible for monitoring all host announcements on the local network and for
+ collating the information contained within them. Using this information, it can provide answers to other Windows
+ network clients that request information such as:
+ </para>
+
+ <itemizedlist>
+ <listitem><para>
+ The list of machines known to the LMB (i.e., the browse list)
+ </para></listitem>
+
+ <listitem><para>
+ The IP addresses of all Domain Controllers known for the Domain
+ </para></listitem>
+
+ <listitem><para>
+ The IP addresses of LMBs
+ </para></listitem>
+
+ <listitem><para>
+ The IP address of the DMB (if one exists)
+ </para></listitem>
+
+ <listitem><para>
+ The IP address of the LMB on the local segment
+ </para></listitem>
+ </itemizedlist>
+
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+
+ <para>
+ What is the role and significance of the &lt;01&gt;&lt;02&gt;__MSBROWSE__&lt;02&gt;&lt;01&gt;
+ name registration?
+ </para>
+
+ </question>
+ <answer>
+
+ <para>
+ <indexterm><primary>Browse Master</primary></indexterm>
+ This name is registered by the Browse Master to broadcast and receive domain announcements.
+ Its scope is limited to the local network segment, or subnet. By querying this name type,
+ Master Browsers on networks that have multiple domains can find the names of Master Browsers
+ for each domain.
+ </para>
+
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+
+ <para>
+ What is the significance of the MIDEARTH&lt;1e&gt; type name registration?
+ </para>
+
+ </question>
+ <answer>
+
+ <para>
+ <indexterm><primary>Browser Election Service</primary></indexterm>
+ This name is registered by all Browse Masters in a domain or workgroup. The registration
+ name type is known as the Browser Election Service. Master Browsers register themselves
+ with this name type so that Domain Master Browsers can locate them to perform cross-subnet
+ browse list updates. This name type is also used to initiate elections for Master Browsers.
+ </para>
+
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+
+ <para>
+ <indexterm><primary>guest account</primary></indexterm>
+ What is the significance of the <parameter>guest account</parameter> in smb.conf?
+ </para>
+
+ </question>
+ <answer>
+
+ <para>
+ This parameter specifies the default UNIX account to which MS Windows networking
+ NULL session connections are mapped. The default name for the UNIX account used for
+ this mapping is called <constant>nobody</constant>. If the UNIX/Linux system that
+ is hosting Samba does not have a <constant>nobody</constant> account and an alternate
+ mapping has not been specified, network browsing will not work at all.
+ </para>
+
+ <para>
+ It should be noted that the <parameter>guest account</parameter> is essential to
+ Samba operation. Either the operating system must have an account called <constant>nobody</constant>
+ or there must be an entry in the &smb.conf; file with a valid UNIX account. For example,
+ <smbconfoption><name>guest account</name><value>ftp</value></smbconfoption>.
+ </para>
+
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+
+ <para>
+ Is it possible to reduce network broadcast activity with Samba-3?
+ </para>
+
+ </question>
+ <answer>
+
+ <para>
+ <indexterm><primary>WINS</primary></indexterm>
+ <indexterm><primary>NetBIOS</primary></indexterm>
+ Yes, there are two ways to do this. The first involves use of WINS (See <emphasis>TOSHARG</emphasis>, Chapter 9,
+ Section 9.5, <quote>WINS &smbmdash; The Windows Inter-networking Name Server</quote>), the
+ alternate method involves disabling the use of NetBIOS over TCP/IP. This second method requires
+ a correctly configured DNS server (see <emphasis>TOSHARG</emphasis>, Chapter 9, Section 9.3, <quote>Discussion</quote>).
+ </para>
+
+ <para>
+ <indexterm><primary>broadcast</primary></indexterm>
+ <indexterm><primary>NetBIOS</primary><secondary>Node Type</secondary></indexterm>
+ <indexterm><primary>Hybrid</primary></indexterm>
+ The use of WINS reduces network broadcast traffic. The reduction is greatest when all network
+ clients are configured to operate in <parameter>Hybrid Mode</parameter>. This can be effected through
+ use of DHCP to set the NetBIOS node type to type 8 for all network clients. Additionally, it is
+ beneficial to configure Samba to use <smbconfoption><name>name resolve order</name><value>wins host
+ bcast</value></smbconfoption>.
+ </para>
+
+ <note><para>
+ Use of SMB without NetBIOS is possible only on Windows 200x/XP Professional clients and servers, as
+ well as with Samba-3.
+ </para></note>
+
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+
+ <para>
+ Can I just use plain-text passwords with Samba?
+ </para>
+
+ </question>
+ <answer>
+
+ <para>
+ Yes, you can configure Samba to use plain-text passwords, though this does create a few problems.
+ </para>
+
+ <para>
+ First, the use of <filename>/etc/passwd</filename> based plain-text passwords requires that registry
+ modifications be made on all MS Windows client machines to enable plain-text passwords support. This
+ significantly diminishes the security of MS Windows client operation. Many network administrators
+ are bitterly opposed to doing this.
+ </para>
+
+ <para>
+ Second, Microsoft has not maintained plain-text password support since the default setting was made
+ disabling this. When network connections are dropped by the client it is not be possible to re-establish
+ the connection automatically. Users need to log off and then log on again. Plain-text password support
+ may interfere with recent enhancements that are part of the Microsoft move toward a more secure computing
+ environment.
+ </para>
+
+ <para>
+ Samba-3 supports Microsoft encrypted passwords. Be advised not to reintroduce plain-text password handling.
+ Just create user accounts by running: <command>smbpasswd -a 'username'</command>
+ </para>
+
+ <para>
+ It is not possible to add a user to the <parameter>passdb backend</parameter> database unless there is
+ a UNIX system account for that user. On systems that run <command>winbindd</command> to access the Samba
+ PDC/BDC to provide Windows user and group accounts, the <parameter>idmap uid, idmap gid</parameter> ranges
+ set in the &smb.conf; file provide the local UID/GIDs needed for local identity management purposes.
+ </para>
+
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+
+ <para>
+ What parameter in the &smb.conf; file is used to enable the use of encrypted passwords?
+ </para>
+
+ </question>
+ <answer>
+
+ <para>
+ The parameter in the &smb.conf; file that controls this behavior is known as <parameter>encrypt
+ passwords</parameter>. The default setting for this in Samba-3 is <constant>Yes (Enabled)</constant>.
+ </para>
+
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+
+ <para>
+ Is it necessary to specify <smbconfoption><name>encrypt passwords</name><value>Yes</value></smbconfoption>
+ when Samba-3 is configured as a Domain Member?
+ </para>
+
+ </question>
+ <answer>
+
+ <para>
+ No. This is the default behavior.
+ </para>
+
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+
+ <para>
+ Is it necessary to specify a <parameter>guest account</parameter> when Samba-3 is configured
+ as a Domain Member server?
+ </para>
+
+ </question>
+ <answer>
+
+ <para>
+ Yes. This is a local function on the server. The default setting is to use the UNIX account
+ <constant>nobody</constant>. If this account does not exist on the UNIX server, then it is
+ necessary to provide a <smbconfoption><name>guest account</name><value>an_account</value></smbconfoption>,
+ where <constant>an_account</constant> is a valid local UNIX user account.
+ </para>
+
+ </answer>
+ </qandaentry>
+ </qandaset>
+
+</sect1>
+
+</chapter>
+