diff options
Diffstat (limited to 'docs/htmldocs/printer_driver2.html')
| -rw-r--r-- | docs/htmldocs/printer_driver2.html | 265 |
1 files changed, 188 insertions, 77 deletions
diff --git a/docs/htmldocs/printer_driver2.html b/docs/htmldocs/printer_driver2.html index ac845b8433..c44d9c5bf8 100644 --- a/docs/htmldocs/printer_driver2.html +++ b/docs/htmldocs/printer_driver2.html @@ -83,23 +83,61 @@ TARGET="_top" information</P ></LI ></UL +><P +>There has been some initial confusion about what all this means +and whether or not it is a requirement for printer drivers to be +installed on a Samba host in order to support printing from Windows +clients. A bug existed in Samba 2.2.0 which made Windows NT/2000 clients +require that the Samba server possess a valid driver for the printer. +This is fixed in Samba 2.2.1 and once again, Windows NT/2000 clients +can use the local APW for installing drivers to be used with a Samba +served printer. This is the same behavior exhibited by Windows 9x clients. +As a side note, Samba does not use these drivers in any way to process +spooled files. They are utilized entirely by the clients.</P +><P +>The following MS KB article, may be of some help if you are dealing with +Windows 2000 clients: <I +CLASS="EMPHASIS" +>How to Add Printers with No User +Interaction in Windows 2000</I +></P +><P +><A +HREF="http://support.microsoft.com/support/kb/articles/Q189/1/05.ASP" +TARGET="_top" +>http://support.microsoft.com/support/kb/articles/Q189/1/05.ASP</A +></P ></DIV ><DIV CLASS="SECT1" ><HR><H1 CLASS="SECT1" ><A -NAME="AEN20" +NAME="AEN25" >Configuration</A ></H1 +><DIV +CLASS="WARNING" ><P -><I -CLASS="EMPHASIS" ->WARNING!!!</I -> Previous versions of Samba -recommended using a share named [printer$]. This name was taken from the -printer$ service created by Windows 9x clients when a -printer was shared. Windows 9x printer servers always have +></P +><TABLE +CLASS="WARNING" +BORDER="1" +WIDTH="100%" +><TR +><TD +ALIGN="CENTER" +><B +>[print$] vs. [printer$]</B +></TD +></TR +><TR +><TD +ALIGN="LEFT" +><P +>Previous versions of Samba recommended using a share named [printer$]. +This name was taken from the printer$ service created by Windows 9x +clients when a printer was shared. Windows 9x printer servers always have a printer$ service which provides read-only access via no password in order to support printer driver downloads.</P ><P @@ -124,21 +162,26 @@ the client.</P >These parameters, including <TT CLASS="PARAMETER" ><I ->printer driver +>printer driver file</I ></TT > parameter, are being depreciated and should not be used in new installations. For more information on this change, you should refer to the <A HREF="#MIGRATION" ->Migration section </A ->of this document.</P +>Migration section</A +> +of this document.</P +></TD +></TR +></TABLE +></DIV ><DIV CLASS="SECT2" ><HR><H2 CLASS="SECT2" ><A -NAME="AEN30" +NAME="AEN36" >Creating [print$]</A ></H2 ><P @@ -161,6 +204,11 @@ CLASS="PROGRAMLISTING" guest ok = yes browseable = yes read only = yes + ; since this share is configured as read only, then we need + ; a 'write list'. Check the file system permissions to make + ; sure this account can copy files to the share. If this + ; is setup to a non-root account, then it should also exist + ; as a 'printer admin' write list = ntadmin</PRE ></P ><P @@ -178,16 +226,17 @@ level user accounts to have write access in order to update files on the share. See the <A HREF="smb./conf.5.html" TARGET="_top" ->smb.conf(5) man page</A -> for more information on -configuring file shares.</P +>smb.conf(5) +man page</A +> for more information on configuring file shares.</P ><P >The requirement for <A HREF="smb.conf.5.html#GUESTOK" TARGET="_top" ><B CLASS="COMMAND" ->guest ok = yes</B +>guest +ok = yes</B ></A > depends upon how your site is configured. If users will be guaranteed to have @@ -257,26 +306,26 @@ ALIGN="CENTER" ALIGN="LEFT" ><P >In order to currently add a new driver to you Samba host, - one of two conditions must hold true:</P +one of two conditions must hold true:</P ><P ></P ><UL ><LI ><P >The account used to connect to the Samba host - must have a uid of 0 (i.e. a root account)</P + must have a uid of 0 (i.e. a root account)</P ></LI ><LI ><P >The account used to connect to the Samba host - must be a member of the <A + must be a member of the <A HREF="smb.conf.5.html#PRINTERADMIN" TARGET="_top" ><TT CLASS="PARAMETER" ><I >printer - admin</I + admin</I ></TT ></A > list.</P @@ -284,7 +333,8 @@ CLASS="PARAMETER" ></UL ><P >Of course, the connected account must still possess access - to add files to the subdirectories beneath [print$].</P +to add files to the subdirectories beneath [print$]. Remember +that all file shares are set to 'read only' by default.</P ></TD ></TR ></TABLE @@ -307,14 +357,34 @@ CLASS="SECT2" ><HR><H2 CLASS="SECT2" ><A -NAME="AEN65" +NAME="AEN71" >Setting Drivers for Existing Printers</A ></H2 ><P >The initial listing of printers in the Samba host's -Printers folder will have no printer driver assigned to them. -The way assign a driver to a printer is to view the Properties -of the printer and either</P +Printers folder will have no real printer driver assigned +to them. By default, in Samba 2.2.0 this driver name was set to +<I +CLASS="EMPHASIS" +>NO PRINTER DRIVER AVAILABLE FOR THIS PRINTER</I +>. +Later versions changed this to a NULL string to allow the use +tof the local Add Printer Wizard on NT/2000 clients. +Attempting to view the printer properties for a printer +which has this default driver assigned will result in +the error message:</P +><P +><I +CLASS="EMPHASIS" +>Device settings cannot be displayed. The driver +for the specified printer is not installed, only spooler +properties will be displayed. Do you want to install the +driver now?</I +></P +><P +>Click "No" in the error dialog and you will be presented with +the printer properties window. The way assign a driver to a +printer is to either</P ><P ></P ><UL @@ -361,7 +431,7 @@ CLASS="SECT2" ><HR><H2 CLASS="SECT2" ><A -NAME="AEN78" +NAME="AEN88" >Support a large number of printers</A ></H2 ><P @@ -413,7 +483,7 @@ Domain=[NARNIA] OS=[Unix] Server=[Samba 2.2.0-alpha3] <TT CLASS="PROMPT" >$ </TT ->rpcclient pogo -U root%bleaK.er \ +>rpcclient pogo -U root%secret \ <TT CLASS="PROMPT" >> </TT @@ -427,7 +497,7 @@ CLASS="SECT2" ><HR><H2 CLASS="SECT2" ><A -NAME="AEN89" +NAME="AEN99" >Adding New Printers via the Windows NT APW</A ></H2 ><P @@ -449,7 +519,7 @@ CLASS="PARAMETER" ><I >printer admin</I ></TT ->. +>). </P ></LI ><LI @@ -476,8 +546,8 @@ TARGET="_top" ><TT CLASS="PARAMETER" ><I ->addprinter -command</I +>add +printer command</I ></TT ></A > must have a defined value. The program @@ -499,7 +569,7 @@ CLASS="COMMAND" CLASS="PARAMETER" ><I >add printer -program</I +command</I ></TT > and reparse to the <TT CLASS="FILENAME" @@ -512,7 +582,7 @@ CLASS="PARAMETER" ><I >add printer program</I ></TT -> is executed undet the context +> is executed under the context of the connected user, not necessarily a root account.</P ><P >There is a complementing <A @@ -521,8 +591,8 @@ TARGET="_top" ><TT CLASS="PARAMETER" ><I ->deleteprinter -command</I +>delete +printer command</I ></TT ></A > for removing entries from the "Printers..." @@ -533,7 +603,7 @@ CLASS="SECT2" ><HR><H2 CLASS="SECT2" ><A -NAME="AEN114" +NAME="AEN124" >Samba and Printer Ports</A ></H2 ><P @@ -570,7 +640,7 @@ CLASS="SECT1" ><HR><H1 CLASS="SECT1" ><A -NAME="AEN122" +NAME="AEN132" >The Imprints Toolset</A ></H1 ><P @@ -588,7 +658,7 @@ CLASS="SECT2" ><HR><H2 CLASS="SECT2" ><A -NAME="AEN126" +NAME="AEN136" >What is Imprints?</A ></H2 ><P @@ -620,7 +690,7 @@ CLASS="SECT2" ><HR><H2 CLASS="SECT2" ><A -NAME="AEN136" +NAME="AEN146" >Creating Printer Driver Packages</A ></H2 ><P @@ -636,7 +706,7 @@ CLASS="SECT2" ><HR><H2 CLASS="SECT2" ><A -NAME="AEN139" +NAME="AEN149" >The Imprints server</A ></H2 ><P @@ -657,7 +727,7 @@ CLASS="SECT2" ><HR><H2 CLASS="SECT2" ><A -NAME="AEN143" +NAME="AEN153" >The Installation Client</A ></H2 ><P @@ -734,7 +804,7 @@ CLASS="FILENAME" ></P ><P >will reveal that Windows NT always uses the NT driver - name. The is ok as Windows NT always requires that at least + name. This is ok as Windows NT always requires that at least the Windows NT version of the printer driver is present. However, Samba does not have the requirement internally. Therefore, how can you use the NT driver name if is has not @@ -751,18 +821,61 @@ CLASS="SECT1" ><HR><H1 CLASS="SECT1" ><A -NAME="AEN165" +NAME="AEN175" ><A NAME="MIGRATION" ></A ->Migration to from Samba 2.0.x to - 2.2.x</A +>Migration to from Samba 2.0.x to 2.2.x</A ></H1 ><P ->Given that printer driver management has changed - (we hope improved :) ) in 2.2.0 over prior releases, - migration from an existing setup to 2.2.0 can follow - several paths.</P +>Given that printer driver management has changed (we hope improved) in +2.2 over prior releases, migration from an existing setup to 2.2 can +follow several paths.</P +><P +>Windows clients have a tendency to remember things for quite a while. +For example, if a Windows NT client has attached to a Samba 2.0 server, +it will remember the server as a LanMan printer server. Upgrading +the Samba host to 2.2 makes support for MSRPC printing possible, but +the NT client will still remember the previous setting.</P +><P +>In order to give an NT client printing "amesia" (only necessary if you +want to use the newer MSRPC printing functionality in Samba), delete +the registry keys associated with the print server contained in +<TT +CLASS="CONSTANT" +>[HKLM\SYSTEM\CurrentControlSet\Control\Print]</TT +>. The +spooler service on the client should be stopped prior to doing this:</P +><P +><TT +CLASS="PROMPT" +>C:\WINNT\ ></TT +> <TT +CLASS="USERINPUT" +><B +>net stop spooler</B +></TT +></P +><P +><I +CLASS="EMPHASIS" +>All the normal disclaimers about editing the registry go +here.</I +> Be careful, and know what you are doing.</P +><P +>The spooler service should be restarted after you have finished +removing the appropriate registry entries by replacing the +<B +CLASS="COMMAND" +>stop</B +> command above with <B +CLASS="COMMAND" +>start</B +>.</P +><P +>Windows 9x clients will continue to use LanMan printing calls +with a 2.2 Samba server so there is no need to perform any of these +modifications on non-NT clients.</P ><DIV CLASS="WARNING" ><P @@ -782,9 +895,8 @@ ALIGN="CENTER" ><TD ALIGN="LEFT" ><P ->The following smb.conf parameters are considered to be - depreciated and will be removed soon. Do not use them - in new installations</P +>The following smb.conf parameters are considered to be depreciated and will +be removed soon. Do not use them in new installations</P ><P ></P ><UL @@ -796,7 +908,7 @@ CLASS="PARAMETER" >printer driver file (G)</I ></TT > - </P + </P ></LI ><LI ><P @@ -806,7 +918,7 @@ CLASS="PARAMETER" >printer driver (S)</I ></TT > - </P + </P ></LI ><LI ><P @@ -816,7 +928,7 @@ CLASS="PARAMETER" >printer driver location (S)</I ></TT > - </P + </P ></LI ></UL ></TD @@ -831,31 +943,31 @@ CLASS="PARAMETER" ><LI ><P >If you do not desire the new Windows NT - print driver support, nothing needs to be done. - All existing parameters work the same.</P + print driver support, nothing needs to be done. + All existing parameters work the same.</P ></LI ><LI ><P >If you want to take advantage of NT printer - driver support but do not want to migrate the - 9x drivers to the new setup, the leave the existing - printers.def file. When smbd attempts to locate a - 9x driver for the printer in the TDB and fails it - will drop down to using the printers.def (and all - associated parameters). The <B + driver support but do not want to migrate the + 9x drivers to the new setup, the leave the existing + printers.def file. When smbd attempts to locate a + 9x driver for the printer in the TDB and fails it + will drop down to using the printers.def (and all + associated parameters). The <B CLASS="COMMAND" >make_printerdef</B > - tool will also remain for backwards compatibility but will - be moved to the "this tool is the old way of doing it" - pile.</P + tool will also remain for backwards compatibility but will + be moved to the "this tool is the old way of doing it" + pile.</P ></LI ><LI ><P >If you install a Windows 9x driver for a printer - on your Samba host (in the printing TDB), this information will - take precedence and the three old printing parameters - will be ignored (including print driver location).</P + on your Samba host (in the printing TDB), this information will + take precedence and the three old printing parameters + will be ignored (including print driver location).</P ></LI ><LI ><P @@ -863,23 +975,22 @@ CLASS="COMMAND" CLASS="FILENAME" >printers.def</TT > - file into the new setup, the current only - solution is to use the Windows NT APW to install the NT drivers - and the 9x drivers. This can be scripted using <B + file into the new setup, the current only solution is to use the Windows + NT APW to install the NT drivers and the 9x drivers. This can be scripted + using <B CLASS="COMMAND" >smbclient</B -> - and <B +> and <B CLASS="COMMAND" >rpcclient</B >. See the - Imprints installation client at <A + Imprints installation client at <A HREF="http://imprints.sourceforge.net/" TARGET="_top" >http://imprints.sourceforge.net/</A > - for an example. - </P + for an example. + </P ></LI ></UL ></DIV |