diff options
Diffstat (limited to 'docs/textdocs/NetBIOS.txt')
-rw-r--r-- | docs/textdocs/NetBIOS.txt | 152 |
1 files changed, 0 insertions, 152 deletions
diff --git a/docs/textdocs/NetBIOS.txt b/docs/textdocs/NetBIOS.txt deleted file mode 100644 index ca0dcc84b7..0000000000 --- a/docs/textdocs/NetBIOS.txt +++ /dev/null @@ -1,152 +0,0 @@ -Contributor: lkcl - samba@samba.org - Copyright 1997 Luke Kenneth Casson Leighton -Date: March 1997 -Status: Current -Updated: 12jun97 - -Subject: Definition of NetBIOS Protocol and Name Resolution Modes -============================================================================= - -======= -NETBIOS -======= - -NetBIOS runs over the following tranports: TCP/IP; NetBEUI and IPX/SPX. -Samba only uses NetBIOS over TCP/IP. For details on the TCP/IP NetBIOS -Session Service NetBIOS Datagram Service, and NetBIOS Names, see -rfc1001.txt and rfc1002.txt. - -NetBEUI is a raw NetBIOS frame protocol implementation that allows NetBIOS -datagrams to be sent out over the 'wire' embedded within LLC frames. -NetBEUI is not required when using NetBIOS over TCP/IP protocols and it -is preferable NOT to install NetBEUI if it can be avoided. - -IPX/SPX is also not required when using NetBIOS over TCP/IP, and it is -preferable NOT to install the IPX/SPX transport unless you are using Novell -servers. At the very least, it is recommended that you do not install -'NetBIOS over IPX/SPX'. - -[When installing Windows 95, you will find that NetBEUI and IPX/SPX are -installed as the default protocols. This is because they are the simplest -to manage: no Windows 95 user-configuration is required]. - - -NetBIOS applications (such as samba) offer their services (for example, -SMB file and print sharing) on a NetBIOS name. They must claim this name -on the network before doing so. The NetBIOS session service will then -accept connections on the application's behalf (on the NetBIOS name -claimed by the application). A NetBIOS session between the application -and the client can then commence. - -NetBIOS names consist of 15 characters plus a 'type' character. This is -similar, in concept, to an IP address and a TCP port number, respectively. -A NetBIOS-aware application on a host will offer different services under -different NetBIOS name types, just as a host will offer different TCP/IP -services on different port numbers. - -NetBIOS names must be claimed on a network, and must be defended. The use -of NetBIOS names is most suitable on a single subnet; a Local Area Network -or a Wide Area Network. - -NetBIOS names are either UNIQUE or GROUP. Only one application can claim a -UNIQUE NetBIOS name on a network. - -There are two kinds of NetBIOS Name resolution: Broadcast and Point-to-Point. - - -================= -BROADCAST NetBIOS -================= - -Clients can claim names, and therefore offer services on successfully claimed -names, on their broadcast-isolated subnet. One way to get NetBIOS services -(such as browsing: see ftp.microsoft.com/drg/developr/CIFS/browdiff.txt; and -SMB file/print sharing: see cifs4.txt) working on a LAN or WAN is to make -your routers forward all broadcast packets from TCP/IP ports 137, 138 and 139. - -This, however, is not recommended. If you have a large LAN or WAN, you will -find that some of your hosts spend 95 percent of their time dealing with -broadcast traffic. [If you have IPX/SPX on your LAN or WAN, you will find -that this is already happening: a packet analyzer will show, roughly -every twelve minutes, great swathes of broadcast traffic!]. - - -============ -NBNS NetBIOS -============ - -rfc1001.txt describes, amongst other things, the implementation and use -of, a 'NetBIOS Name Service'. NT/AS offers 'Windows Internet Name Service' -which is fully rfc1001/2 compliant, but has had to take specific action -with certain NetBIOS names in order to make it useful. (for example, it -deals with the registration of <1c> <1d> <1e> names all in different ways. -I recommend the reading of the Microsoft WINS Server Help files for full -details). - -Samba also offers WINS server capabilities. Samba does not interact -with NT/AS (WINS replication), so if you have a mixed NT server and -Samba server environment, it is recommended that you use the NT server's -WINS capabilities, instead of samba's WINS server capabilities. - -The use of a WINS server cuts down on broadcast network traffic for -NetBIOS name resolution. It has the effect of pulling all the broadcast -isolated subnets together into a single NetBIOS scope, across your LAN -or WAN, while avoiding the use of TCP/IP broadcast packets. - -When you have a WINS server on your LAN, WINS clients will be able to -contact the WINS server to resolve NetBIOS names. Note that only those -WINS clients that have registered with the same WINS server will be -visible. The WINS server _can_ have static NetBIOS entries added to its -database (usually for security reasons you might want to consider putting -your domain controllers or other important servers as static entries, -but you should not rely on this as your sole means of security), but for -the most part, NetBIOS names are registered dynamically. - -[It is important to mention that samba's browsing capabilities (as a WINS -client) must have access to a WINS server. if you are using samba also -as a WINS server, then it will have a direct short-cut into the WINS -database. - -This provides some confusion for lots of people, and is worth mentioning -here: a Browse Server is NOT a WINS Server, even if these services are -implemented in the same application. A Browse Server _needs_ a WINS server -because a Browse Server is a WINS client, which is _not_ the same thing]. - -Clients can claim names, and therefore offer services on successfully claimed -names, on their broadcast-isolated subnet. One way to get NetBIOS services -(such as browsing: see ftp.microsoft.com/drg/developr/CIFS/browdiff.txt; and -SMB file/print sharing: see cifs6.txt) working on a LAN or WAN is to make -your routers forward all broadcast packets from TCP/IP ports 137, 138 and 139. -You will find, however, if you do this on a large LAN or a WAN, that your -network is completely swamped by NetBIOS and browsing packets, which is why -WINS was developed to minimise the necessity of broadcast traffic. - -WINS Clients therefore claim names from the WINS server. If the WINS -server allows them to register a name, the client's NetBIOS session service -can then offer services on this name. Other WINS clients will then -contact the WINS server to resolve a NetBIOS name. - - -======================= -Samba WINS Capabilities -======================= - -To configure samba as a WINS server, you must add "wins support = yes" to -the [global] section of your smb.conf file. This will enable WINS server -capabilities in nmbd. - -To configure samba as a WINS client, you must add "wins server = x.x.x.x" -to the [global] section of your smb.conf file, where x.x.x.x is the TCP/IP -address of your WINS server. The browsing capabilities in nmbd will then -register (and resolve) WAN-wide NetBIOS names with this WINS server. - -Note that if samba has "wins support = yes", then the browsing capabilities -will _not_ use the "wins server" option to resolve NetBIOS names: it will -go directly to the internal WINS database for NetBIOS name resolution. It -is therefore invalid to have both "wins support = yes" and -"wins server = x.x.x.x". Note, in particular, that if you configure the -"wins server" parameter to be the ip address of your samba server itself -(as might one intuitively think), that you will run into difficulties. -Do not use both parameters! - - |