summaryrefslogtreecommitdiff
path: root/docs/textdocs
diff options
context:
space:
mode:
Diffstat (limited to 'docs/textdocs')
-rw-r--r--docs/textdocs/BROWSING.txt65
-rw-r--r--docs/textdocs/BUGS.txt2
-rw-r--r--docs/textdocs/DIAGNOSIS.txt38
-rw-r--r--docs/textdocs/DOMAIN.txt5
-rw-r--r--docs/textdocs/PROJECTS2
-rw-r--r--docs/textdocs/Speed.txt2
6 files changed, 28 insertions, 86 deletions
diff --git a/docs/textdocs/BROWSING.txt b/docs/textdocs/BROWSING.txt
index 05d2f96544..9d1e85f531 100644
--- a/docs/textdocs/BROWSING.txt
+++ b/docs/textdocs/BROWSING.txt
@@ -5,53 +5,17 @@ Samba now fully supports browsing. The browsing is supported by nmbd
and is also controlled by options in the smb.conf file (see
smb.conf(5)).
-Samba can act as a browse master for a workgroup and the ability for
-samba to support domain logons and scripts is now available with features
-still being added. See DOMAIN.txt for more information .
+Samba can act as a browse master for a workgroup and the ability for
+samba to support domain logons and scripts is now available. See
+DOMAIN.txt for more information on domain logons.
To get browsing to work you need to run nmbd as usual, but will need
to use the "workgroup" option in smb.conf to control what workgroup
Samba becomes a part of.
-The -G option is most useful for simple setups where Samba is browsable
-in only one workgroup. In more complex cases the lmhosts file is
-better.
-
-Be very careful setting up your lmhosts file. An incorrectly setup
-lmhosts file can have disasterous results for your net!
-
-A simple lmhosts file might be:
-
-# This is a simple lmhosts file
-#
-# This is a host alias. Anyone querying this name
-# will get the specified IP
-192.0.2.17 SMBDATA
-#
-# first put ourselves in workgroup MYGROUP using
-# our own net address
-0.0.0.0 MYGROUP 255.255.255.0 G
-
-Note in the above that I overrode what workgroup Samba is in using the
-G flag. Also note that the 0.0.0.0 address is used, which will be
-automatically replaced with the broadcast address for groups, and with
-the local IP address for other entries.
-
Samba also has a useful option for a Samba server to offer itself for
-browsing on another subnet.
-
-This works by the lmhosts file specifying a broadcast address on the
-other network to use to find a browse master for the workgroup.
-
-For example if you wanted yourself to appear in the workgroup STAFF on
-the network which has a broadcast of 192.0.3.255 then this entry would
-do the trick:
-
-# put ourselves in the STAFF workgroup on the other subnet
-192.0.3.255 STAFF 255.255.255.0 G
-
-Notice the G at the end! It is very important you include this as this
-entry without the G could cause a broadcast storm!
+browsing on another subnet. See "remote announce" in the smb.conf man
+page.
If something doesn't work then hopefully the log.nmb file will
help you track down the problem. Try a debug level of 2 or 3 for
@@ -74,8 +38,8 @@ are now far more likely to correctly find your broadcast and network
addess, so in most cases these aren't needed.
The other big problem people have is that their broadcast address,
-netmask or IP address is wrong (specified with the -B, -N and -I
-options to nmbd).
+netmask or IP address is wrong (specified with the "interfaces" option
+in smb.conf)
FORCING SAMBA TO BE THE MASTER
==============================
@@ -87,7 +51,7 @@ election. By default Samba uses a very low precedence and thus loses
elections to just about anyone else.
If you want Samba to win elections then just set the "os level" global
-option in smb.conf to a higher number. It defaults to 0. Using 33
+option in smb.conf to a higher number. It defaults to 0. Using 34
would make it win all elections over every other system (except other
samba systems!)
@@ -132,22 +96,9 @@ ends in a 0) then you will strike problems. Windows for Workgroups
does not seem to support a 0's broadcast and you will probably find
that browsing and name lookups won't work.
-You have a few options:
-
-1) change to a 1's broadcast on your unix server. These often end in
-.255 (check with your local network guru for details)
-
-2) set the nmbd broadcast to a 1's based address on the command line using
-the -B option. This only works if your network setup listens on both
-0s and 1s based broadcasts. The -B option can only control what
-address it sends to, not what it listens on.
-
MULTIPLE INTERFACES
===================
Samba now supports machines with multiple network interfaces. If you
have multiple interfaces then you will need to use the "interfaces"
option in smb.conf to configure them. See smb.conf(5) for details.
-
-
-
diff --git a/docs/textdocs/BUGS.txt b/docs/textdocs/BUGS.txt
index 8cccfcf449..099791c156 100644
--- a/docs/textdocs/BUGS.txt
+++ b/docs/textdocs/BUGS.txt
@@ -1,6 +1,6 @@
This file describes how to report Samba bugs.
->> The email address for bug reports is samba-bugs@anu.edu.au <<
+>> The email address for bug reports is samba-bugs@samba.anu.edu.au <<
Please take the time to read this file before you submit a bug
report. Also, please see if it has changed between releases, as I
diff --git a/docs/textdocs/DIAGNOSIS.txt b/docs/textdocs/DIAGNOSIS.txt
index 34099e6a16..740f417ed3 100644
--- a/docs/textdocs/DIAGNOSIS.txt
+++ b/docs/textdocs/DIAGNOSIS.txt
@@ -11,7 +11,7 @@ carefully choose them so later tests only use capabilities verified in
the earlier tests.
I would welcome additions to this set of tests. Please mail them to
-samba-bugs@anu.edu.au
+samba-bugs@samba.anu.edu.au
If you send me an email saying "it doesn't work" and you have not
followed this test procedure then you should not be surprised if I
@@ -36,7 +36,7 @@ smb.conf. I will assume this share is called "tmp". You can add a
read only = yes
-THESE TESTS ASSUME VERSION 1.9.15 OR LATER OF THE SAMBA SUITE. SOME
+THESE TESTS ASSUME VERSION 1.9.16 OR LATER OF THE SAMBA SUITE. SOME
COMMANDS SHOWN DID NOT EXIST IN EARLIER VERSIONS
@@ -66,7 +66,7 @@ you do have correct entries for the remainder of these tests.
TEST 3:
-------
-run the command "smbclient -L BIGSERVER -U%" on the unix box. You
+run the command "smbclient -L BIGSERVER" on the unix box. You
should get a list of available shares back.
If you get a error message containing the string "Bad password" then
@@ -86,7 +86,8 @@ If you get a "session request failed" then the server refused the
connection. If it says "your server software is being unfriendly" then
its probably because you have invalid command line parameters to smbd,
or a similar fatal problem with the initial startup of smbd. Also
-check your config file for syntax errors with "testparm".
+check your config file for syntax errors with "testparm" and that the
+various directories where samba keeps its log and lock files exist.
Another common cause of these two errors is having something already running
on port 139, such as Samba (ie smbd is running from inetd already) or something
@@ -101,7 +102,7 @@ run the command "nmblookup -B BIGSERVER __SAMBA__". You should get the
IP address of your Samba server back.
If you don't then nmbd is incorrectly installed. Check your inetd.conf
-if yu run it from there, or that the daemon is running and listening
+if you run it from there, or that the daemon is running and listening
to udp port 137.
One common problem is that many inetd implementations can't take many
@@ -116,9 +117,7 @@ run the command "nmblookup -B ACLIENT '*'"
You should get the PCs IP address back. If you don't then the client
software on the PC isn't installed correctly, or isn't started, or you
-got the name of the PC wrong. Note that you probably won't get a "node
-status response" from the PC due to a bug in the microsoft netbios
-nameserver implementation (it responds to the wrong port number).
+got the name of the PC wrong.
TEST 6:
-------
@@ -134,20 +133,9 @@ hosts.
If this doesn't give a similar result to the previous test then
nmblookup isn't correctly getting your broadcast address through its
-automatic mechanism. In this case you should experiment with the -B
-option which allows you to manually specify the broadcast address,
-overriding the automatic detection. You should try different broadcast
-addresses until your find the one that works. It will most likely be
-something like a.b.c.255 as microsoft tcpip stacks only listen on 1's
-based broadcast addresses. If you get stuck then ask your local
-networking guru for help (and show them this paragraph).
-
-If you find you do need the -B option (ie. the automatic detection
-doesn't work) then you should add the -B option with the right
-broadcast address for your network to the command line of nmbd in
-inetd.conf or in the script you use to start nmbd as a daemon. Once
-you do this go back to the "nmblookup __SAMBA__ -B BIGSERVER" test to
-make sure you have it running properly.
+automatic mechanism. In this case you should experiment use the
+"interfaces" option in smb.conf to manually configure your IP
+address, broadcast and netmask.
If your PC and server aren't on the same subnet then you will need to
use the -B option to set the broadcast address to the that of the PCs
@@ -174,6 +162,8 @@ compile in support for them in smbd
- you have a mixed case password and you haven't enabled the "password
level" option at a high enough level
- the "path =" line in smb.conf is incorrect. Check it with testparm
+- you enabled password encryption but didn't create the SMB encrypted
+password file
Once connected you should be able to use the commands "dir" "get"
"put" etc. Type "help <command>" for instructions. You should
@@ -227,8 +217,8 @@ TEST 10:
From file manager try to browse the server. Your samba server should
appear in the browse list of your local workgroup (or the one you
-specified in the Makefile). You should be able to double click on the
-name of the server and get a list of shares. If you get a "invalid
+specified in smb.conf). You should be able to double click on the name
+of the server and get a list of shares. If you get a "invalid
password" error when you do then you are probably running WinNT and it
is refusing to browse a server that has no encrypted password
capability and is in user level security mode.
diff --git a/docs/textdocs/DOMAIN.txt b/docs/textdocs/DOMAIN.txt
index 31e19675fa..ee086b0e23 100644
--- a/docs/textdocs/DOMAIN.txt
+++ b/docs/textdocs/DOMAIN.txt
@@ -7,7 +7,8 @@ administration. Support for these kind of things should be added
sometime in the future.
The domain support only works for WfWg and Win95 clients. Support for
-NT and OS/2 clients is still being worked on.
+NT and OS/2 clients is still being worked on and currently does not
+work.
Using these features you can make your clients verify their logon via
the Samba server and make clients run a batch file when they logon to
@@ -39,7 +40,7 @@ For example I have used:
the choice of batch file is, of course, up to you. The above would
give each user a separate batch file as the %U will be changed to
their username automatically. The other standard % macros may also be
-used. You can make the btch files come from a subdirectory by using
+used. You can make the batch files come from a subdirectory by using
soemthing like:
logon script = scripts\%U.bat
diff --git a/docs/textdocs/PROJECTS b/docs/textdocs/PROJECTS
index cf903f2c6d..d3b2b741e4 100644
--- a/docs/textdocs/PROJECTS
+++ b/docs/textdocs/PROJECTS
@@ -14,7 +14,7 @@ then please let me know! Also, if you are listed below and you have
any corrections or updates then please let me know.
Email contact:
-samba-bugs@anu.edu.au
+samba-bugs@samba.anu.edu.au
========================================================================
Documentation and FAQ
diff --git a/docs/textdocs/Speed.txt b/docs/textdocs/Speed.txt
index 583076a6e3..28bceb658f 100644
--- a/docs/textdocs/Speed.txt
+++ b/docs/textdocs/Speed.txt
@@ -273,4 +273,4 @@ COMMENTS
If you've read this far then please give me some feedback! Which of
the above suggestions worked for you?
-Mail the samba mailing list or samba-bugs@anu.edu.au
+Mail the samba mailing list or samba-bugs@samba.anu.edu.au