diff options
Diffstat (limited to 'docs/yodldocs/nmblookup.1.yo')
| -rw-r--r-- | docs/yodldocs/nmblookup.1.yo | 28 |
1 files changed, 25 insertions, 3 deletions
diff --git a/docs/yodldocs/nmblookup.1.yo b/docs/yodldocs/nmblookup.1.yo index 20316ad3c6..af04e6b1e9 100644 --- a/docs/yodldocs/nmblookup.1.yo +++ b/docs/yodldocs/nmblookup.1.yo @@ -8,7 +8,7 @@ manpagename(nmblookup)(NetBIOS over TCP/IP client used to lookup NetBIOS names) label(SYNOPSIS) manpagesynopsis() -bf(nmblookup) [-M] [-R] [-S] [-r] [-A] [-h] [-B broadcast address] [-U unicast address] [-d debuglevel] [-s smb config file] [-i NetBIOS scope] name +bf(nmblookup) [link(-M)(minusM)] [link(-R)(minusR)] [link(-S)(minusS)] [link(-r)(minusr)] [link(-A)(minusA)] [link(-h)(minush)] [link(-B broadcast address)(minusB)] [link(-U unicast address)(minusU)] [link(-d debuglevel)(minusd)] [link(-s smb config file)(minuss)] [link(-i NetBIOS scope)(minusi)] link(name)(name) label(DESCRIPTION) manpagedescription() @@ -25,9 +25,11 @@ manpageoptions() startdit() +label(minusM) dit(bf(-M)) Searches for a master browser. This is done by doing a broadcast lookup on the special name tt(__MSBROWSE__). +label(minusR) dit(bf(-R)) Set the recursion desired bit in the packet to do a recursive lookup. This is used when sending a name query to a machine running a WINS server and the user wishes to query the names in the @@ -35,9 +37,11 @@ WINS server. If this bit is unset the normal (broadcast responding) NetBIOS processing code on a machine is used instead. See rfc1001, rfc1002 for details. +label(minusS) dit(bf(-S)) Once the name query has returned an IP address then do a node status query as well. +label(minusr) dit(bf(-r)) Try and bind to UDP port 137 to send and receive UDP datagrams. The reason for this option is a bug in Windows 95 where it ignores the source port of the requesting packet and only replies to @@ -46,11 +50,14 @@ needed to bind to this port, and in addition, if the url(bf(nmbd))(nmbd.8.html) daemon is running on this machine it also binds to this port. +label(minusA) dit(bf(-A)) Interpret <name> as an IP Address and do a node status query on this address. +label(minush) dit(bf(-h)) Print a help (usage) message. +label(minusB) dit(bf(-B broadcast address)) Send the query to the given broadcast address. Without this option the default behavior of nmblookup is to send the query to the broadcast address of the primary network @@ -58,10 +65,12 @@ interface as either auto-detected or defined in the url(bf(interfaces))(smb.conf.5.html#interfaces) parameter of the url(bf(smb.conf (5)))(smb.conf.5.html) file. +label(minusU) dit(bf(-U unicast address)) Do a unicast query to the specified address or host tt("unicast address"). This option (along with the -bf(-R) option) is needed to query a WINS server. +link(bf(-R))(minusR) option) is needed to query a WINS server. +label(minusd) dit(bf(-d debuglevel)) debuglevel is an integer from 0 to 10. The default value if this parameter is not specified is zero. @@ -75,6 +84,17 @@ should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of data, most of which is extremely cryptic. +Note that specifying this parameter here will override the url(bf(log +level))(smb.conf.5.html#loglevel) parameter in the url(bf(smb.conf +(5)))(smb.conf.5.html) file. + +label(minuss) +dit(bf(-s smb.conf)) This parameter specifies the pathname to the +Samba configuration file, smb.conf. This file controls all aspects of +the Samba setup on the machine and smbclient also needs to read this +file. + +label(minusi) dit(bf(-i scope)) This specifies a NetBIOS scope that smbclient will use to communicate with when generating NetBIOS names. For details on the use of NetBIOS scopes, see rfc1001.txt and rfc1002.txt. NetBIOS scopes @@ -82,6 +102,7 @@ are em(very) rarely used, only set this parameter if you are the system administrator in charge of all the NetBIOS systems you communicate with. +label(name) dit(bf(name)) This is the NetBIOS name being queried. Depending upon the previous options this may be a NetBIOS name or IP address. If a NetBIOS name then the different name types may be specified by @@ -113,7 +134,8 @@ This man page is correct for version 2.0 of the Samba suite. label(SEEALSO) manpageseealso() -url(bf(samba (7)))(samba.7.html), url(bf(nmbd (8)))(nmbd.8.html), url(bf(smb.conf (5)))(smb.conf.5.html) +url(bf(samba (7)))(samba.7.html), url(bf(nmbd (8)))(nmbd.8.html), +url(bf(smb.conf (5)))(smb.conf.5.html) label(AUTHOR) manpageauthor() |