diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/faq/clientapp.html | 146 | ||||
| -rw-r--r-- | docs/faq/general.html | 450 | ||||
| -rw-r--r-- | docs/faq/install.html | 525 | ||||
| -rw-r--r-- | docs/faq/samba-faq.html | 225 |
4 files changed, 1346 insertions, 0 deletions
diff --git a/docs/faq/clientapp.html b/docs/faq/clientapp.html new file mode 100644 index 0000000000..d2ba0a08b5 --- /dev/null +++ b/docs/faq/clientapp.html @@ -0,0 +1,146 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<HTML +><HEAD +><TITLE +>Specific client application problems</TITLE +><META +NAME="GENERATOR" +CONTENT="Modular DocBook HTML Stylesheet Version 1.77"><LINK +REL="HOME" +TITLE="Samba FAQ" +HREF="samba-faq.html"><LINK +REL="PREVIOUS" +TITLE="Compiling and installing Samba on a Unix host" +HREF="install.html"></HEAD +><BODY +CLASS="CHAPTER" +BGCOLOR="#FFFFFF" +TEXT="#000000" +LINK="#0000FF" +VLINK="#840084" +ALINK="#0000FF" +><DIV +CLASS="NAVHEADER" +><TABLE +SUMMARY="Header navigation table" +WIDTH="100%" +BORDER="0" +CELLPADDING="0" +CELLSPACING="0" +><TR +><TH +COLSPAN="3" +ALIGN="center" +>Samba FAQ</TH +></TR +><TR +><TD +WIDTH="10%" +ALIGN="left" +VALIGN="bottom" +><A +HREF="install.html" +ACCESSKEY="P" +>Prev</A +></TD +><TD +WIDTH="80%" +ALIGN="center" +VALIGN="bottom" +></TD +><TD +WIDTH="10%" +ALIGN="right" +VALIGN="bottom" +> </TD +></TR +></TABLE +><HR +ALIGN="LEFT" +WIDTH="100%"></DIV +><DIV +CLASS="CHAPTER" +><H1 +><A +NAME="CLIENTAPP" +></A +>Chapter 3. Specific client application problems</H1 +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN170" +></A +>3.1. MS Office Setup reports "Cannot change properties of '\MSOFFICE\SETUP.INI'"</H1 +><P +>When installing MS Office on a Samba drive for which you have admin +user permissions, ie. admin users = username, you will find the +setup program unable to complete the installation.</P +><P +>To get around this problem, do the installation without admin user +permissions The problem is that MS Office Setup checks that a file is +rdonly by trying to open it for writing.</P +><P +>Admin users can always open a file for writing, as they run as root. +You just have to install as a non-admin user and then use "chown -R" +to fix the owner.</P +></DIV +></DIV +><DIV +CLASS="NAVFOOTER" +><HR +ALIGN="LEFT" +WIDTH="100%"><TABLE +SUMMARY="Footer navigation table" +WIDTH="100%" +BORDER="0" +CELLPADDING="0" +CELLSPACING="0" +><TR +><TD +WIDTH="33%" +ALIGN="left" +VALIGN="top" +><A +HREF="install.html" +ACCESSKEY="P" +>Prev</A +></TD +><TD +WIDTH="34%" +ALIGN="center" +VALIGN="top" +><A +HREF="samba-faq.html" +ACCESSKEY="H" +>Home</A +></TD +><TD +WIDTH="33%" +ALIGN="right" +VALIGN="top" +> </TD +></TR +><TR +><TD +WIDTH="33%" +ALIGN="left" +VALIGN="top" +>Compiling and installing Samba on a Unix host</TD +><TD +WIDTH="34%" +ALIGN="center" +VALIGN="top" +> </TD +><TD +WIDTH="33%" +ALIGN="right" +VALIGN="top" +> </TD +></TR +></TABLE +></DIV +></BODY +></HTML +>
\ No newline at end of file diff --git a/docs/faq/general.html b/docs/faq/general.html new file mode 100644 index 0000000000..5a42678cb6 --- /dev/null +++ b/docs/faq/general.html @@ -0,0 +1,450 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<HTML +><HEAD +><TITLE +>General Information</TITLE +><META +NAME="GENERATOR" +CONTENT="Modular DocBook HTML Stylesheet Version 1.77"><LINK +REL="HOME" +TITLE="Samba FAQ" +HREF="samba-faq.html"><LINK +REL="PREVIOUS" +TITLE="Samba FAQ" +HREF="samba-faq.html"><LINK +REL="NEXT" +TITLE="Compiling and installing Samba on a Unix host" +HREF="install.html"></HEAD +><BODY +CLASS="CHAPTER" +BGCOLOR="#FFFFFF" +TEXT="#000000" +LINK="#0000FF" +VLINK="#840084" +ALINK="#0000FF" +><DIV +CLASS="NAVHEADER" +><TABLE +SUMMARY="Header navigation table" +WIDTH="100%" +BORDER="0" +CELLPADDING="0" +CELLSPACING="0" +><TR +><TH +COLSPAN="3" +ALIGN="center" +>Samba FAQ</TH +></TR +><TR +><TD +WIDTH="10%" +ALIGN="left" +VALIGN="bottom" +><A +HREF="samba-faq.html" +ACCESSKEY="P" +>Prev</A +></TD +><TD +WIDTH="80%" +ALIGN="center" +VALIGN="bottom" +></TD +><TD +WIDTH="10%" +ALIGN="right" +VALIGN="bottom" +><A +HREF="install.html" +ACCESSKEY="N" +>Next</A +></TD +></TR +></TABLE +><HR +ALIGN="LEFT" +WIDTH="100%"></DIV +><DIV +CLASS="CHAPTER" +><H1 +><A +NAME="GENERAL" +></A +>Chapter 1. General Information</H1 +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN12" +></A +>1.1. Where can I get it?</H1 +><P +>The Samba suite is available at the <A +HREF="http://samba.org/" +TARGET="_top" +>samba website</A +>.</P +></DIV +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN16" +></A +>1.2. What do the version numbers mean?</H1 +><P +>It is not recommended that you run a version of Samba with the word +"alpha" in its name unless you know what you are doing and are willing +to do some debugging. Many, many people just get the latest +recommended stable release version and are happy. If you are brave, by +all means take the plunge and help with the testing and development - +but don't install it on your departmental server. Samba is typically +very stable and safe, and this is mostly due to the policy of many +public releases.</P +><P +>How the scheme works: +<P +></P +><TABLE +BORDER="0" +><TBODY +><TR +><TD +>When major changes are made the version number is increased. For +example, the transition from 1.9.15 to 1.9.16. However, this version +number will not appear immediately and people should continue to use +1.9.15 for production systems (see next point.)</TD +></TR +><TR +><TD +>Just after major changes are made the software is considered +unstable, and a series of alpha releases are distributed, for example +1.9.16alpha1. These are for testing by those who know what they are +doing. The "alpha" in the filename will hopefully scare off those who +are just looking for the latest version to install.</TD +></TR +><TR +><TD +>When Andrew thinks that the alphas have stabilised to the point +where he would recommend new users install it, he renames it to the +same version number without the alpha, for example 1.9.16.</TD +></TR +><TR +><TD +>Inevitably bugs are found in the "stable" releases and minor patch +levels are released which give us the pXX series, for example 1.9.16p2.</TD +></TR +></TBODY +></TABLE +><P +></P +> </P +><P +>So the progression goes: + +<PRE +CLASS="PROGRAMLISTING" +>1.9.15p7 (production) +1.9.15p8 (production) +1.9.16alpha1 (test sites only) +: +1.9.16alpha20 (test sites only) +1.9.16 (production) +1.9.16p1 (production)</PRE +></P +><P +>The above system means that whenever someone looks at the samba ftp +site they will be able to grab the highest numbered release without an +alpha in the name and be sure of getting the current recommended +version.</P +></DIV +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN28" +></A +>1.3. What platforms are supported?</H1 +><P +>Many different platforms have run Samba successfully. The platforms +most widely used and thus best tested are Linux and SunOS.</P +><P +>At time of writing, there is support (or has been support for in earlier +versions):</P +><P +></P +><TABLE +BORDER="0" +><TBODY +><TR +><TD +>A/UX 3.0</TD +></TR +><TR +><TD +>AIX</TD +></TR +><TR +><TD +>Altos Series 386/1000</TD +></TR +><TR +><TD +>Amiga</TD +></TR +><TR +><TD +>Apollo Domain/OS sr10.3</TD +></TR +><TR +><TD +>BSDI </TD +></TR +><TR +><TD +>B.O.S. (Bull Operating System)</TD +></TR +><TR +><TD +>Cray, Unicos 8.0</TD +></TR +><TR +><TD +>Convex</TD +></TR +><TR +><TD +>DGUX. </TD +></TR +><TR +><TD +>DNIX.</TD +></TR +><TR +><TD +>FreeBSD</TD +></TR +><TR +><TD +>HP-UX</TD +></TR +><TR +><TD +>Intergraph. </TD +></TR +><TR +><TD +>Linux with/without shadow passwords and quota</TD +></TR +><TR +><TD +>LYNX 2.3.0</TD +></TR +><TR +><TD +>MachTen (a unix like system for Macintoshes)</TD +></TR +><TR +><TD +>Motorola 88xxx/9xx range of machines</TD +></TR +><TR +><TD +>NetBSD</TD +></TR +><TR +><TD +>NEXTSTEP Release 2.X, 3.0 and greater (including OPENSTEP for Mach).</TD +></TR +><TR +><TD +>OS/2 using EMX 0.9b</TD +></TR +><TR +><TD +>OSF1</TD +></TR +><TR +><TD +>QNX 4.22</TD +></TR +><TR +><TD +>RiscIX. </TD +></TR +><TR +><TD +>RISCOs 5.0B</TD +></TR +><TR +><TD +>SEQUENT. </TD +></TR +><TR +><TD +>SCO (including: 3.2v2, European dist., OpenServer 5)</TD +></TR +><TR +><TD +>SGI.</TD +></TR +><TR +><TD +>SMP_DC.OSx v1.1-94c079 on Pyramid S series</TD +></TR +><TR +><TD +>SONY NEWS, NEWS-OS (4.2.x and 6.1.x)</TD +></TR +><TR +><TD +>SUNOS 4</TD +></TR +><TR +><TD +>SUNOS 5.2, 5.3, and 5.4 (Solaris 2.2, 2.3, and '2.4 and later')</TD +></TR +><TR +><TD +>Sunsoft ISC SVR3V4</TD +></TR +><TR +><TD +>SVR4</TD +></TR +><TR +><TD +>System V with some berkely extensions (Motorola 88k R32V3.2).</TD +></TR +><TR +><TD +>ULTRIX.</TD +></TR +><TR +><TD +>UNIXWARE</TD +></TR +><TR +><TD +>UXP/DS</TD +></TR +></TBODY +></TABLE +><P +></P +></DIV +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN71" +></A +>1.4. How do I subscribe to the Samba Mailing Lists?</H1 +><P +>Look at <A +HREF="http://samba.org/samba/archives.html" +TARGET="_top" +>the samba mailing list page</A +></P +></DIV +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN75" +></A +>1.5. Pizza supply details</H1 +><P +>Those who have registered in the Samba survey as "Pizza Factory" will +already know this, but the rest may need some help. Andrew doesn't ask +for payment, but he does appreciate it when people give him +pizza. This calls for a little organisation when the pizza donor is +twenty thousand kilometres away, but it has been done. </P +><P +>Method 1: Ring up your local branch of an international pizza chain +and see if they honour their vouchers internationally. Pizza Hut do, +which is how the entire Canberra Linux Users Group got to eat pizza +one night, courtesy of someone in the US.</P +><P +>Method 2: Ring up a local pizza shop in Canberra and quote a credit +card number for a certain amount, and tell them that Andrew will be +collecting it (don't forget to tell him.) One kind soul from Germany +did this.</P +><P +>Method 3: Purchase a pizza voucher from your local pizza shop that has +no international affiliations and send it to Andrew. It is completely +useless but he can hang it on the wall next to the one he already has +from Germany :-)</P +><P +>Method 4: Air freight him a pizza with your favourite regional +flavours. It will probably get stuck in customs or torn apart by +hungry sniffer dogs but it will have been a noble gesture.</P +></DIV +></DIV +><DIV +CLASS="NAVFOOTER" +><HR +ALIGN="LEFT" +WIDTH="100%"><TABLE +SUMMARY="Footer navigation table" +WIDTH="100%" +BORDER="0" +CELLPADDING="0" +CELLSPACING="0" +><TR +><TD +WIDTH="33%" +ALIGN="left" +VALIGN="top" +><A +HREF="samba-faq.html" +ACCESSKEY="P" +>Prev</A +></TD +><TD +WIDTH="34%" +ALIGN="center" +VALIGN="top" +><A +HREF="samba-faq.html" +ACCESSKEY="H" +>Home</A +></TD +><TD +WIDTH="33%" +ALIGN="right" +VALIGN="top" +><A +HREF="install.html" +ACCESSKEY="N" +>Next</A +></TD +></TR +><TR +><TD +WIDTH="33%" +ALIGN="left" +VALIGN="top" +>Samba FAQ</TD +><TD +WIDTH="34%" +ALIGN="center" +VALIGN="top" +> </TD +><TD +WIDTH="33%" +ALIGN="right" +VALIGN="top" +>Compiling and installing Samba on a Unix host</TD +></TR +></TABLE +></DIV +></BODY +></HTML +>
\ No newline at end of file diff --git a/docs/faq/install.html b/docs/faq/install.html new file mode 100644 index 0000000000..f9ecac1384 --- /dev/null +++ b/docs/faq/install.html @@ -0,0 +1,525 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<HTML +><HEAD +><TITLE +>Compiling and installing Samba on a Unix host</TITLE +><META +NAME="GENERATOR" +CONTENT="Modular DocBook HTML Stylesheet Version 1.77"><LINK +REL="HOME" +TITLE="Samba FAQ" +HREF="samba-faq.html"><LINK +REL="PREVIOUS" +TITLE="General Information" +HREF="general.html"><LINK +REL="NEXT" +TITLE="Specific client application problems" +HREF="clientapp.html"></HEAD +><BODY +CLASS="CHAPTER" +BGCOLOR="#FFFFFF" +TEXT="#000000" +LINK="#0000FF" +VLINK="#840084" +ALINK="#0000FF" +><DIV +CLASS="NAVHEADER" +><TABLE +SUMMARY="Header navigation table" +WIDTH="100%" +BORDER="0" +CELLPADDING="0" +CELLSPACING="0" +><TR +><TH +COLSPAN="3" +ALIGN="center" +>Samba FAQ</TH +></TR +><TR +><TD +WIDTH="10%" +ALIGN="left" +VALIGN="bottom" +><A +HREF="general.html" +ACCESSKEY="P" +>Prev</A +></TD +><TD +WIDTH="80%" +ALIGN="center" +VALIGN="bottom" +></TD +><TD +WIDTH="10%" +ALIGN="right" +VALIGN="bottom" +><A +HREF="clientapp.html" +ACCESSKEY="N" +>Next</A +></TD +></TR +></TABLE +><HR +ALIGN="LEFT" +WIDTH="100%"></DIV +><DIV +CLASS="CHAPTER" +><H1 +><A +NAME="INSTALL" +></A +>Chapter 2. Compiling and installing Samba on a Unix host</H1 +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN84" +></A +>2.1. I can't see the Samba server in any browse lists!</H1 +><P +>See Browsing.html in the docs directory of the samba source +for more information on browsing.</P +><P +>If your GUI client does not permit you to select non-browsable +servers, you may need to do so on the command line. For example, under +Lan Manager you might connect to the above service as disk drive M: +thusly: +<PRE +CLASS="PROGRAMLISTING" +> net use M: \\mary\fred</PRE +> +The details of how to do this and the specific syntax varies from +client to client - check your client's documentation.</P +></DIV +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN89" +></A +>2.2. Some files that I KNOW are on the server doesn't show up when I view the files from my client!</H1 +><P +>See the next question.</P +></DIV +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN92" +></A +>2.3. Some files on the server show up with really wierd filenames when I view the files from my client!</H1 +><P +>If you check what files are not showing up, you will note that they +are files which contain upper case letters or which are otherwise not +DOS-compatible (ie, they are not legal DOS filenames for some reason).</P +><P +>The Samba server can be configured either to ignore such files +completely, or to present them to the client in "mangled" form. If you +are not seeing the files at all, the Samba server has most likely been +configured to ignore them. Consult the man page smb.conf(5) for +details of how to change this - the parameter you need to set is +"mangled names = yes".</P +></DIV +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN96" +></A +>2.4. My client reports "cannot locate specified computer" or similar</H1 +><P +>This indicates one of three things: You supplied an incorrect server +name, the underlying TCP/IP layer is not working correctly, or the +name you specified cannot be resolved.</P +><P +>After carefully checking that the name you typed is the name you +should have typed, try doing things like pinging a host or telnetting +to somewhere on your network to see if TCP/IP is functioning OK. If it +is, the problem is most likely name resolution.</P +><P +>If your client has a facility to do so, hardcode a mapping between the +hosts IP and the name you want to use. For example, with Lan Manager +or Windows for Workgroups you would put a suitable entry in the file +LMHOSTS. If this works, the problem is in the communication between +your client and the netbios name server. If it does not work, then +there is something fundamental wrong with your naming and the solution +is beyond the scope of this document.</P +><P +>If you do not have any server on your subnet supplying netbios name +resolution, hardcoded mappings are your only option. If you DO have a +netbios name server running (such as the Samba suite's nmbd program), +the problem probably lies in the way it is set up. Refer to Section +Two of this FAQ for more ideas.</P +><P +>By the way, remember to REMOVE the hardcoded mapping before further +tests :-)</P +></DIV +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN103" +></A +>2.5. My client reports "cannot locate specified share name" or similar</H1 +><P +>This message indicates that your client CAN locate the specified +server, which is a good start, but that it cannot find a service of +the name you gave.</P +><P +>The first step is to check the exact name of the service you are +trying to connect to (consult your system administrator). Assuming it +exists and you specified it correctly (read your client's docs on how +to specify a service name correctly), read on:</P +><P +></P +><TABLE +BORDER="0" +><TBODY +><TR +><TD +>Many clients cannot accept or use service names longer than eight characters.</TD +></TR +><TR +><TD +>Many clients cannot accept or use service names containing spaces.</TD +></TR +><TR +><TD +>Some servers (not Samba though) are case sensitive with service names.</TD +></TR +><TR +><TD +>Some clients force service names into upper case.</TD +></TR +></TBODY +></TABLE +><P +></P +></DIV +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN112" +></A +>2.6. Printing doesn't work</H1 +><P +>Make sure that the specified print command for the service you are +connecting to is correct and that it has a fully-qualified path (eg., +use "/usr/bin/lpr" rather than just "lpr").</P +><P +>Make sure that the spool directory specified for the service is +writable by the user connected to the service. In particular the user +"nobody" often has problems with printing, even if it worked with an +earlier version of Samba. Try creating another guest user other than +"nobody".</P +><P +>Make sure that the user specified in the service is permitted to use +the printer.</P +><P +>Check the debug log produced by smbd. Search for the printer name and +see if the log turns up any clues. Note that error messages to do with +a service ipc$ are meaningless - they relate to the way the client +attempts to retrieve status information when using the LANMAN1 +protocol.</P +><P +>If using WfWg then you need to set the default protocol to TCP/IP, not +Netbeui. This is a WfWg bug.</P +><P +>If using the Lanman1 protocol (the default) then try switching to +coreplus. Also not that print status error messages don't mean +printing won't work. The print status is received by a different +mechanism.</P +></DIV +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN120" +></A +>2.7. My client reports "This server is not configured to list shared resources"</H1 +><P +>Your guest account is probably invalid for some reason. Samba uses the +guest account for browsing in smbd. Check that your guest account is +valid.</P +><P +>See also 'guest account' in smb.conf man page.</P +></DIV +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN124" +></A +>2.8. Log message "you appear to have a trapdoor uid system"</H1 +><P +>This can have several causes. It might be because you are using a uid +or gid of 65535 or -1. This is a VERY bad idea, and is a big security +hole. Check carefully in your /etc/passwd file and make sure that no +user has uid 65535 or -1. Especially check the "nobody" user, as many +broken systems are shipped with nobody setup with a uid of 65535.</P +><P +>It might also mean that your OS has a trapdoor uid/gid system :-)</P +><P +>This means that once a process changes effective uid from root to +another user it can't go back to root. Unfortunately Samba relies on +being able to change effective uid from root to non-root and back +again to implement its security policy. If your OS has a trapdoor uid +system this won't work, and several things in Samba may break. Less +things will break if you use user or server level security instead of +the default share level security, but you may still strike +problems.</P +><P +>The problems don't give rise to any security holes, so don't panic, +but it does mean some of Samba's capabilities will be unavailable. +In particular you will not be able to connect to the Samba server as +two different uids at once. This may happen if you try to print as a +"guest" while accessing a share as a normal user. It may also affect +your ability to list the available shares as this is normally done as +the guest user.</P +><P +>Complain to your OS vendor and ask them to fix their system.</P +><P +>Note: the reason why 65535 is a VERY bad choice of uid and gid is that +it casts to -1 as a uid, and the setreuid() system call ignores (with +no error) uid changes to -1. This means any daemon attempting to run +as uid 65535 will actually run as root. This is not good!</P +></DIV +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN132" +></A +>2.9. Why are my file's timestamps off by an hour, or by a few hours?</H1 +><P +>This is from Paul Eggert eggert@twinsun.com.</P +><P +>Most likely it's a problem with your time zone settings.</P +><P +>Internally, Samba maintains time in traditional Unix format, +namely, the number of seconds since 1970-01-01 00:00:00 Universal Time +(or ``GMT''), not counting leap seconds.</P +><P +>On the server side, Samba uses the Unix TZ variable to convert +internal timestamps to and from local time. So on the server side, there are +two things to get right. +<P +></P +><TABLE +BORDER="0" +><TBODY +><TR +><TD +>The Unix system clock must have the correct Universal time. Use the shell command "sh -c 'TZ=UTC0 date'" to check this.</TD +></TR +><TR +><TD +>The TZ environment variable must be set on the server before Samba is invoked. The details of this depend on the server OS, but typically you must edit a file whose name is /etc/TIMEZONE or /etc/default/init, or run the command `zic -l'.</TD +></TR +></TBODY +></TABLE +><P +></P +></P +><P +>TZ must have the correct value.</P +><P +>If possible, use geographical time zone settings +(e.g. TZ='America/Los_Angeles' or perhaps + TZ=':US/Pacific'). These are supported by most +popular Unix OSes, are easier to get right, and are +more accurate for historical timestamps. If your +operating system has out-of-date tables, you should be +able to update them from the public domain time zone +tables at <A +HREF="ftp://elsie.nci.nih.gov/pub/" +TARGET="_top" +>ftp://elsie.nci.nih.gov/pub/</A +>.</P +><P +>If your system does not support geographical timezone +settings, you must use a Posix-style TZ strings, e.g. +TZ='PST8PDT,M4.1.0/2,M10.5.0/2' for US Pacific time. +Posix TZ strings can take the following form (with optional + items in brackets): +<PRE +CLASS="PROGRAMLISTING" +> StdOffset[Dst[Offset],Date/Time,Date/Time]</PRE +> + where:</P +><P +><P +></P +><TABLE +BORDER="0" +><TBODY +><TR +><TD +>`Std' is the standard time designation (e.g. `PST').</TD +></TR +><TR +><TD +>`Offset' is the number of hours behind UTC (e.g. `8'). +Prepend a `-' if you are ahead of UTC, and +append `:30' if you are at a half-hour offset. +Omit all the remaining items if you do not use +daylight-saving time.</TD +></TR +><TR +><TD +>`Dst' is the daylight-saving time designation +(e.g. `PDT').</TD +></TR +><TR +><TD +>The optional second `Offset' is the number of +hours that daylight-saving time is behind UTC. +The default is 1 hour ahead of standard time.</TD +></TR +><TR +><TD +>`Date/Time,Date/Time' specify when daylight-saving +time starts and ends. The format for a date is +`Mm.n.d', which specifies the dth day (0 is Sunday) +of the nth week of the mth month, where week 5 means +the last such day in the month. The format for a +time is [h]h[:mm[:ss]], using a 24-hour clock.</TD +></TR +></TBODY +></TABLE +><P +></P +></P +><P +>Other Posix string formats are allowed but you don't want +to know about them.</P +><P +>On the client side, you must make sure that your client's clock and +time zone is also set appropriately. [[I don't know how to do this.]] +Samba traditionally has had many problems dealing with time zones, due +to the bizarre ways that Microsoft network protocols handle time +zones. </P +></DIV +><DIV +CLASS="SECT1" +><H1 +CLASS="SECT1" +><A +NAME="AEN155" +></A +>2.10. How do I set the printer driver name correctly?</H1 +><P +>Question:</P +><P +><SPAN +CLASS="QUOTE" +>" On NT, I opened "Printer Manager" and "Connect to Printer". + Enter ["\\ptdi270\ps1"] in the box of printer. I got the + following error message + "</SPAN +> + </P +><P +> <PRE +CLASS="PROGRAMLISTING" +> You do not have sufficient access to your machine + to connect to the selected printer, since a driver + needs to be installed locally. + </PRE +> + </P +><P +>Answer:</P +><P +>In the more recent versions of Samba you can now set the "printer +driver" in smb.conf. This tells the client what driver to use. For +example:</P +><P +><PRE +CLASS="PROGRAMLISTING" +> printer driver = HP LaserJet 4L</PRE +></P +><P +>With this, NT knows to use the right driver. You have to get this string +exactly right.</P +><P +>To find the exact string to use, you need to get to the dialog box in +your client where you select which printer driver to install. The +correct strings for all the different printers are shown in a listbox +in that dialog box.</P +></DIV +></DIV +><DIV +CLASS="NAVFOOTER" +><HR +ALIGN="LEFT" +WIDTH="100%"><TABLE +SUMMARY="Footer navigation table" +WIDTH="100%" +BORDER="0" +CELLPADDING="0" +CELLSPACING="0" +><TR +><TD +WIDTH="33%" +ALIGN="left" +VALIGN="top" +><A +HREF="general.html" +ACCESSKEY="P" +>Prev</A +></TD +><TD +WIDTH="34%" +ALIGN="center" +VALIGN="top" +><A +HREF="samba-faq.html" +ACCESSKEY="H" +>Home</A +></TD +><TD +WIDTH="33%" +ALIGN="right" +VALIGN="top" +><A +HREF="clientapp.html" +ACCESSKEY="N" +>Next</A +></TD +></TR +><TR +><TD +WIDTH="33%" +ALIGN="left" +VALIGN="top" +>General Information</TD +><TD +WIDTH="34%" +ALIGN="center" +VALIGN="top" +> </TD +><TD +WIDTH="33%" +ALIGN="right" +VALIGN="top" +>Specific client application problems</TD +></TR +></TABLE +></DIV +></BODY +></HTML +>
\ No newline at end of file diff --git a/docs/faq/samba-faq.html b/docs/faq/samba-faq.html new file mode 100644 index 0000000000..9623dc9a7c --- /dev/null +++ b/docs/faq/samba-faq.html @@ -0,0 +1,225 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<HTML +><HEAD +><TITLE +>Samba FAQ</TITLE +><META +NAME="GENERATOR" +CONTENT="Modular DocBook HTML Stylesheet Version 1.77"><LINK +REL="NEXT" +TITLE="General Information" +HREF="general.html"></HEAD +><BODY +CLASS="BOOK" +BGCOLOR="#FFFFFF" +TEXT="#000000" +LINK="#0000FF" +VLINK="#840084" +ALINK="#0000FF" +><DIV +CLASS="BOOK" +><A +NAME="SAMBA-FAQ" +></A +><DIV +CLASS="TITLEPAGE" +><H1 +CLASS="TITLE" +><A +NAME="SAMBA-FAQ" +></A +>Samba FAQ</H1 +><H3 +CLASS="AUTHOR" +><A +NAME="AEN4" +></A +>Samba Team</H3 +><HR></DIV +><H1 +><A +NAME="AEN7" +></A +>Dedication</H1 +><P +>This is the Frequently Asked Questions (FAQ) document for +Samba, the free and very popular SMB server product. An SMB server +allows file and printer connections from clients such as Windows, +OS/2, Linux and others. Current to version 3.0. Please send any +corrections to the samba documentation mailinglist at +<A +HREF="mailto:samba-doc@samba.org" +TARGET="_top" +>samba-doc@samba.org</A +>. +This FAQ is based on the old Samba FAQ by Dan Shearer and Paul Blackman.</P +><DIV +CLASS="TOC" +><DL +><DT +><B +>Table of Contents</B +></DT +><DT +>1. <A +HREF="general.html" +>General Information</A +></DT +><DD +><DL +><DT +>1.1. <A +HREF="general.html#AEN12" +>Where can I get it?</A +></DT +><DT +>1.2. <A +HREF="general.html#AEN16" +>What do the version numbers mean?</A +></DT +><DT +>1.3. <A +HREF="general.html#AEN28" +>What platforms are supported?</A +></DT +><DT +>1.4. <A +HREF="general.html#AEN71" +>How do I subscribe to the Samba Mailing Lists?</A +></DT +><DT +>1.5. <A +HREF="general.html#AEN75" +>Pizza supply details</A +></DT +></DL +></DD +><DT +>2. <A +HREF="install.html" +>Compiling and installing Samba on a Unix host</A +></DT +><DD +><DL +><DT +>2.1. <A +HREF="install.html#AEN84" +>I can't see the Samba server in any browse lists!</A +></DT +><DT +>2.2. <A +HREF="install.html#AEN89" +>Some files that I KNOW are on the server doesn't show up when I view the files from my client!</A +></DT +><DT +>2.3. <A +HREF="install.html#AEN92" +>Some files on the server show up with really wierd filenames when I view the files from my client!</A +></DT +><DT +>2.4. <A +HREF="install.html#AEN96" +>My client reports "cannot locate specified computer" or similar</A +></DT +><DT +>2.5. <A +HREF="install.html#AEN103" +>My client reports "cannot locate specified share name" or similar</A +></DT +><DT +>2.6. <A +HREF="install.html#AEN112" +>Printing doesn't work</A +></DT +><DT +>2.7. <A +HREF="install.html#AEN120" +>My client reports "This server is not configured to list shared resources"</A +></DT +><DT +>2.8. <A +HREF="install.html#AEN124" +>Log message "you appear to have a trapdoor uid system"</A +></DT +><DT +>2.9. <A +HREF="install.html#AEN132" +>Why are my file's timestamps off by an hour, or by a few hours?</A +></DT +><DT +>2.10. <A +HREF="install.html#AEN155" +>How do I set the printer driver name correctly?</A +></DT +></DL +></DD +><DT +>3. <A +HREF="clientapp.html" +>Specific client application problems</A +></DT +><DD +><DL +><DT +>3.1. <A +HREF="clientapp.html#AEN170" +>MS Office Setup reports "Cannot change properties of '\MSOFFICE\SETUP.INI'"</A +></DT +></DL +></DD +></DL +></DIV +></DIV +><DIV +CLASS="NAVFOOTER" +><HR +ALIGN="LEFT" +WIDTH="100%"><TABLE +SUMMARY="Footer navigation table" +WIDTH="100%" +BORDER="0" +CELLPADDING="0" +CELLSPACING="0" +><TR +><TD +WIDTH="33%" +ALIGN="left" +VALIGN="top" +> </TD +><TD +WIDTH="34%" +ALIGN="center" +VALIGN="top" +> </TD +><TD +WIDTH="33%" +ALIGN="right" +VALIGN="top" +><A +HREF="general.html" +ACCESSKEY="N" +>Next</A +></TD +></TR +><TR +><TD +WIDTH="33%" +ALIGN="left" +VALIGN="top" +> </TD +><TD +WIDTH="34%" +ALIGN="center" +VALIGN="top" +> </TD +><TD +WIDTH="33%" +ALIGN="right" +VALIGN="top" +>General Information</TD +></TR +></TABLE +></DIV +></BODY +></HTML +>
\ No newline at end of file |