summaryrefslogtreecommitdiff
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/docbook/manpages/rpcclient.1.sgml662
-rw-r--r--docs/docbook/manpages/smbclient.1.sgml1651
2 files changed, 1409 insertions, 904 deletions
diff --git a/docs/docbook/manpages/rpcclient.1.sgml b/docs/docbook/manpages/rpcclient.1.sgml
index ef3fb1454e..ef475d0032 100644
--- a/docs/docbook/manpages/rpcclient.1.sgml
+++ b/docs/docbook/manpages/rpcclient.1.sgml
@@ -1,270 +1,392 @@
-<!--
-
- I am looking for help to finish SGML.
-
--->
-<!-- manual page source format generated by PolyglotMan v3.0.9
- available via anonymous ftp from ftp.cs.berkeley.edu:/ucb/people/phelps/tcltk/rman.tar.Z -->
-
-<RefEntry ID="RPCCLIENT"."8">
-<RefMeta><RefEntryTitle>"RPCCLIENT"</RefEntryTitle><ManVolNum>"8"</ManVolNum></RefMeta>
-
-<RefNameDiv><Title>Name</Title>rpcclient </RefEntry><RefPurpose> developer's tool to testing client side MS-RPC functions </RefSect1>
-
-<RefSynopsisDiv><Title>Synopsis</Title><ItemizedList MARK=Bullet>
-<Term><B>rpcclient</B></Term><ListItem><Para>[-d
-debuglevel] [-S server] [-l logbasename] [-n netbios name] [-N] [-m maxprotocol]
-[-I destIP] [-E] [-U username] [-W workgroup] [-c `command string`] [-t terminalcode]
-[-i scope] [-O socket options] [-s smb.conf] </Para></ListItem>
-</ItemizedList>
-</RefSect1>
-
-<RefSect1><Title>Description</Title><ItemizedList MARK=Bullet>
-<Term><B>rpcclient</B></Term><ListItem><Para>is a utility
-for developers for executing various MS-RPC functions. It's primary use is
-for testing Samba's own MS-RPC server implementation, however many administrators
-have written scripts around it to manage Windows NT clients from their
-UNIX workstation. </Para></ListItem>
-</ItemizedList>
-</RefSect1>
-
-<RefSect1><Title>Options</Title>
-
-<Para><ItemizedList MARK=Bullet>
-<Term><B>-d debuglevel</B></Term><ListItem><Para>set the debuglevel. Debug level 0 is
-the lowest and 100 being the highest. This should be set to 100 if you are
-planning on submitting a bug report to the Samba team (see BUGS.txt). </Para></ListItem>
-<Term><B>-S
-server</B></Term><ListItem><Para>NetBIOS name of Server to which you wish to connect. The server can
-be any SMB/CIFS server. The name is resolved using either the "name resolve
- order = " line or by using the <B>-R</B> option. </Para></ListItem>
-<Term><B>-l logbasename</B></Term><ListItem><Para>File name for log/debug
-files. .client will be appended. The log file is never removed by the client.
-</Para></ListItem>
-<Term><B>-n netbios name</B></Term><ListItem><Para>NetBIOS name of the local machine. This option is only needed
-if your Samba client cannot find it automatically. Samba should use the
-uppercase of the machine's hostname. </Para></ListItem>
-<Term><B>-N</B></Term><ListItem><Para>tells rpcclient not to ask for a password.
-rpcclient will prompt the user by default. </Para></ListItem>
-<Term><B>-I destIP</B></Term><ListItem><Para>The IP address of the
-server specified with the <B>-S</B> option. Only needed when the server's NetBIOS
-name cannot be resolved using WINS or broadcast and isn't found in the LMHOSTS
-file. </Para></ListItem>
-<Term><B>-E</B></Term><ListItem><Para>causes regedit to write messages to stderr instead of stdout. </Para></ListItem>
-<Term><B>-U username[%pass]</B></Term><ListItem><Para>Sets
-the SMB username or username and password. If %pass is not specified, The
-user will be prompted. The client will first check the USER environment
-variable, then the LOGNAME variable and if either exist, the string is
-uppercased. Anything in these variables following a % sign will be treated
-as the password. If these environmental variables are not found, the username
-GUEST is used. </Para></ListItem>
-<Term>If the password is not included in these environment variables
-</Term><ListItem><Para>(using the %pass syntax), rpcclient will look for a PASSWD environment
-variable from which to read the password. </Para></ListItem>
-<Term>A third option is to use a credentials
-file which contains </Term><ListItem><Para>the plaintext of the username and password. This option
-is mainly provided for scripts where the admin doesn't desire to pass the
-credentials on the command line or via environment variables. If this method
-is used, make certain that the permissions on the file restrict access
-from unwanted users. See the <B>-A</B> for more details. </Para></ListItem>
-<Term>Be cautious about including
-passwords in scripts or in the </Term><ListItem><Para>CWPASSWD environment variable. Also, on many
-systems the command line of a running process may be seen via the CWps
-command to be safe always allow smbclient to prompt for a password and
-type it in directly. </Para></ListItem>
-<Term><B>-A &lt;filename&gt;</B></Term><ListItem><Para>This option allows you to specify a file
-from which to read the username and password used in the connection. The
-format of the file is </Para></ListItem>
-<Term>CWusername = &lt;value&gt; </Term><ListItem><Para><BR>
-CWpassword = &lt;value&gt; <BR>
-</Para></ListItem>
-<Term>Make certain that the permissions on the file restrict access from </Term><ListItem><Para>unwanted
-users. </Para></ListItem>
-<Term><B>-W domain</B></Term><ListItem><Para>Set the SMB domain of the username. This overrides the default
- domain which is the domain of the server specified with the bt(-S) option.
-If the domain specified is the same as the server's NetBIOS name, it causes
-the client to log on using the server's local SAM (as opposed to the Domain
-SAM). </Para></ListItem>
-<Term><B>-P</B></Term><ListItem><Para>operate in promptless mode. Without this mode (the default) rpcclient
-displays a prompt of the form '[domain\username@host]$' </Para></ListItem>
-<Term><B>-c 'command string'</B></Term><ListItem><Para>execute
-semicolon separated commands (listed below)) </Para></ListItem>
-<Term><B>-t terminalcode</B></Term><ListItem><Para>This tells the
-Samba client how to interpret the incoming filenames, in regards to character
-sets. The list here is not complete. For a complete list see your local Samba
-source. Some valid options are sjis, euc, jis7, jis8, junet and hex. </Para></ListItem>
-<Term><B>-O socket
-options</B></Term><ListItem><Para>These socket options are the same as in smb.conf (under the bt(socket
-options = ) section). </Para></ListItem>
-<Term><B>-s smb.conf</B></Term><ListItem><Para>Specifies the location of the all important
-smb.conf file. </Para></ListItem>
-<Term><B>-i scope</B></Term><ListItem><Para>Defines the NetBIOS scope. For more information on NetBIOS
-scopes, see rfc1001 and rfc1002. NetBIOS scopes are rarely used. </Para></ListItem>
-</ItemizedList>
-
-
-<Para></RefSect1>
-
-<RefSect1><Title>Commands</Title>
-
-<Para><ItemizedList MARK=Bullet>
-<Term><B>SPOOLSS
-Commands</B></Term><ListItem><Para></Para></ListItem>
-<Term>spoolenum</Term><ListItem><Para>Execute an EnumPrinters call. This lists the various installed
-and share printers. Refer to the MS Platform SDK documentation for more
-details of the various flags and calling options. </Para></ListItem>
-</ItemizedList>
-
-
-<Para><ItemizedList MARK=Bullet>
-<Term>spoolenumports &lt;level&gt;</Term><ListItem><Para>Executes
-an EnumPorts call using the specified info level. Currently only info level
-1 and 2 are supported. </Para></ListItem>
-</ItemizedList>
-
-
-<Para><ItemizedList MARK=Bullet>
-<Term>spoolenumdata</Term><ListItem><Para>Enumerate all printer setting data stored
-on the server. On Windows NT clients, these values are stored in the registry,
-while Samba servers store them in the printers TDB. This command corresponds
-to the MS Platform SDK EnumPorts function. </Para></ListItem>
-</ItemizedList>
-
-
-<Para><ItemizedList MARK=Bullet>
-<Term>spooljobs &lt;printer&gt;</Term><ListItem><Para>List the jobs
-and status of a given printer. This command corresponds to the MS Platform
-SDK EnumJobs function. </Para></ListItem>
-</ItemizedList>
-
-
-<Para><ItemizedList MARK=Bullet>
-<Term>spoolopen &lt;printer&gt;</Term><ListItem><Para>Execute an OpenPrinterEx() and ClosePrinter()
-RPC against a given printer. </Para></ListItem>
-</ItemizedList>
-
-
-<Para><ItemizedList MARK=Bullet>
-<Term>spoolgetdata</Term><ListItem><Para>Retrive the data for a given printer
-setting. See the <B>spoolenumdata</B> command for more information. This command
-corresponds to the GetPrinterData() MS Platform SDK function. </Para></ListItem>
-</ItemizedList>
-
-
-<Para><ItemizedList MARK=Bullet>
-<Term>spoolgetprinter
-&lt;printer&gt;</Term><ListItem><Para>Retrieve the current printer information. This command sorresponds
-to the GetPrinter() MS Platform SDK function. </Para></ListItem>
-</ItemizedList>
-
-
-<Para><ItemizedList MARK=Bullet>
-<Term>spoolgetprinterdriver &lt;printer&gt;</Term><ListItem><Para>Retrive
-the printer driver information (such as driver file, config file, dependent
-files, etc...) for the given printer. This command corresponds to the GetPrinterDriver()
-MS Platform SDK function. </Para></ListItem>
-</ItemizedList>
-
-
-<Para><ItemizedList MARK=Bullet>
-<Term>spoolgetprinterdriverdir &lt;arch&gt;</Term><ListItem><Para>Execute a GetPrinterDriverDirectory()
-RPC to retreive the SMB share name and subdirectory for storing printer
-driver files for a given architecture. Possible values for &lt;arch&gt; are "Windows
-4.0" (for Windows 95/98), "Windows NT x86", "Windows NT PowerPC", "Windows
-Alpha_AXP", and "Windows NT R4000". </Para></ListItem>
-</ItemizedList>
-
-
-<Para> &lt;drivername&gt; &lt;port&gt;" .YODLTAGEND. Add a
-printer on the remote server. This printer will be automatically shared.
- Be aware that the printer driver must already be installed on the server
-(see <B>addprinterdriver</B>) and the &lt;port&gt; must be a valid port name.
-
-<Para><ItemizedList MARK=Bullet>
-<Term>spooladdprinterdriver
-&lt;arch&gt; &lt;config&gt;</Term><ListItem><Para>Execute an AddPrinterDriver() RPC to install the printer driver
-information on the server. Note that the driver files should already exist
-in the directort returned by <B>spoolgetprinterdriverdir</B>. Possible values
-for &lt;arch&gt; are the same as those for the <B>spooolgetprintedriverdir</B> command.
-The &lt;config&gt; parameter is defined as follows: </Para></ListItem>
-</ItemizedList>
-
-
-<Para><ItemizedList MARK=Bullet>
-<Term>&lt;Long Printer Name&gt;:&lt;Driver File
-Name&gt;:&lt;Data File Name&gt;:&lt;Config File Name&gt;:&lt;Help File Name&gt;:&lt;Language Monitor Name&gt;:&lt;Default
-Data Type&gt;:&lt;Comma Separated list of Files&gt; </Term><ListItem><Para></Para></ListItem>
-</ItemizedList>
-
-
-<Para><ItemizedList MARK=Bullet>
-<Term>Any empty fields should be enter
-as the string "NULL". </Term><ListItem><Para></Para></ListItem>
-</ItemizedList>
-
-
-<Para><ItemizedList MARK=Bullet>
-<Term>Samba does not need to support the concept of Print
-Monitors </Term><ListItem><Para>since these only apply to local printers whose driver can make
-use of a bi-directional link for communication. This field should be "NULL".
- On a remote NT print server, the Print Monitor for a driver must already
-be installed prior to adding the driver or else the RPC will fail. </Para></ListItem>
-</ItemizedList>
-
-
-<Para><ItemizedList MARK=Bullet>
-<Term><B>General
-Commands</B></Term><ListItem><Para></Para></ListItem>
-<Term>set</Term><ListItem><Para>Set miscellaneous rpcclient command line options during a running
- session. </Para></ListItem>
-</ItemizedList>
-
-
-<Para><ItemizedList MARK=Bullet>
-<Term>use</Term><ListItem><Para>Connect to a rmeote SMB server. <B>rpcclient</B> has the ability to
-maintain connections to multiple server simulaneously. </Para></ListItem>
-</ItemizedList>
-
-
-<Para><ItemizedList MARK=Bullet>
-<Term>help</Term><ListItem><Para>Print a listing
-of all known commands or extended help on a particular command. </Para></ListItem>
-</ItemizedList>
-
-
-<Para><ItemizedList MARK=Bullet>
-<Term>quit</Term><ListItem><Para>Exit
-rpcclient. </Para></ListItem>
-</ItemizedList>
-
-
-<Para></RefSect1>
-
-<RefSect1><Title>Bugs</Title>rpcclient is designed as a developer testing tool and may
-not be robust in certain areas (such as command line parsing). It has been
-known to generate a core dump upon failures when invalid parameters where
-passed to the interpreter.
-
-<Para>From Luke Leighton's original rpcclient man page:
-"WARNING! The MSRPC over SMB code has been developed from examining Network
-traces. No documentation is available from the original creators (Microsoft)
-on how MSRPC over SMB works, or how the individual MSRPC services work.
-Microsoft's implementation of these services has been demonstrated (and
-reported) to be... a bit flakey in places.
-
-<Para>The development of Samba's implementation
-is also a bit rough, and as more of the services are understood, it can
-even result in versions of <B><Command>smbd(8)</B></Command> and rpcclient that are incompatible
-for some commands or services. Additionally, the developers are sending
-reports to Microsoft, and problems found or reported to Microsoft are
-fixed in Service Packs, which may result in incompatibilities."
-
-<Para></RefSect1>
-
-<RefSect1><Title>See Also</Title><B><Command>samba
-(7)</B></Command> </RefSect1>
-
-<RefSect1><Title>Author</Title>Samba is written by The Samba Team as Open Source. This man page
-was written by Matthew Geddes, Luke Kenneth Casson, and Gerald Carter. </RefSect1>
-
-</RefEntry>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+<refentry id="rpcclient">
+
+<refmeta>
+ <refentrytitle>rpcclient</refentrytitle>
+ <manvolnum>1</manvolnum>
+</refmeta>
+
+
+<refnamediv>
+ <refname>rpcclient</refname>
+ <refpurpose>developer's tool to testing client side
+ MS-RPC functions</refpurpose>
+</refnamediv>
+
+<refsynopsisdiv>
+ <cmdsynopsis>
+ <command>nmblookup</command>
+ <arg choice="opt">-d debuglevel</arg>
+ <arg choice="opt">-S server</arg>
+ <arg choice="opt">-U username</arg>
+ <arg choice="opt">-W workgroup</arg>
+ <arg choice="opt">-n &lt;netbios name&gt;</arg>
+ <arg choice="opt">-A authfile</arg>
+ <arg choice="opt">-N</arg>
+ <arg choice="opt">-l logfile</arg>
+ <arg choice="opt">-I destinationIP</arg>
+ <arg choice="opt">-E &lt;terminal code&gt;</arg>
+ <arg choice="opt">-c &lt;command string&gt;</arg>
+ <arg choice="opt">-i scope</arg>
+ <arg choice="opt">-O &lt;socket options&gt;</arg>
+ <arg choice="opt">-s &lt;smb config file&gt;</arg>
+ </cmdsynopsis>
+</refsynopsisdiv>
+
+<refsect1>
+ <title>DESCRIPTION</title>
+
+ <para>This tool is part of the <ulink url="samba.7.html">
+ Samba</ulink> suite.</para>
+
+ <para><command>rpcclient</command> is a utility for developers for
+ executing various MS-RPC functions. It's primary use is for testing
+ Samba's own MS-RPC server implementation, however many administrators
+ have written scripts around it to manage Windows NT clients from
+ their UNIX workstation. </para>
+</refsect1>
+
+
+<refsect1>
+ <title>OPTIONS</title>
+
+ <variablelist>
+ <varlistentry>
+ <term>-d debuglevel</term>
+ <listitem><para>set the debuglevel. Debug level 0 is the lowest
+ and 100 being the highest. This should be set to 100 if you are
+ planning on submitting a bug report to the Samba team
+ (see BUGS.txt). </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-S server</term>
+ <listitem><para>NetBIOS name of Server to which you wish to
+ connect. The server can be any SMB/CIFS server. The name is
+ resolved using either the <parameter>name resolve order</parameter>
+ line or by using the -R option. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-l logbasename</term>
+ <listitem><para>File name for log/debug files. .client will be
+ appended. The log file is never removed by the client.
+ </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-n netbios name</term><listitem><para>NetBIOS name of the
+ local machine. This option is only needed if your Samba client
+ cannot find it automatically. Samba should use the uppercase
+ of the machine's hostname. </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-N</term>
+ <listitem><para>tells rpcclient not to ask for a password.
+ <command>rpcclient</command> will prompt the user by default.
+ </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-I destinationIP</term>
+ <listitem><para>The IP address of the server specified with
+ the -S option. Only needed when the server's NetBIOS name cannot
+ be resolved using WINS or broadcast and isn't found in the LMHOSTS
+ file. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-E</term>
+ <listitem><para>causes <command>rpcclient</command> to write
+ messages to stderr instead of stdout. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-U username[%pass]</term>
+ <listitem><para>Sets the SMB username or username and password.
+ If %pass is not specified, The user will be prompted. The client
+ will first check the USER environment variable, then the
+ <parameter>$LOGNAME</parameter> variable and if either exist, the
+ string is uppercased. Anything in these variables following a '%'
+ sign will be treated as the password. If these environmental
+ variables are not found, the username <constant>GUEST</constant>
+ is used. </para>
+
+ <para>If the password is not included in these environment
+ variables (using the %pass syntax), rpcclient will look for
+ a <parameter>$PASSWD</parameter> environment variable from which
+ to read the password. </para>
+
+ <para>A third option is to use a credentials file which
+ contains the plaintext of the username and password. This
+ option is mainly provided for scripts where the admin doesn't
+ desire to pass the credentials on the command line or via environment
+ variables. If this method is used, make certain that the permissions
+ on the file restrict access from unwanted users. See the
+ <parameter>-A</parameter> for more details. </para>
+
+ <para>Be cautious about including passwords in scripts or in
+ the <parameter>$PASSWD</parameter> environment variable. Also, on
+ many systems the command line of a running process may be seen
+ via the <command>ps</command> command to be safe always allow
+ <command>rpcclient</command> to prompt for a password and type
+ it in directly. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-A filename</term><listitem><para>This option allows
+ you to specify a file from which to read the username and
+ password used in the connection. The format of the file is
+ </para>
+
+ <para><programlisting>
+username = &lt;value&gt;
+password = &lt;value&gt;
+ </programlisting></para>
+
+
+ <para>Make certain that the permissions on the file restrict
+ access from unwanted users. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-W domain</term>
+ <listitem><para>Set the SMB domain of the username. This
+ overrides the default domain which is the domain of the
+ server specified with the <parameter>-S</parameter> option.
+ If the domain specified is the same as the server's NetBIOS name,
+ it causes the client to log on using the server's local SAM (as
+ opposed to the Domain SAM). </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-P</term>
+ <listitem><para>operate in promptless mode. Without this
+ mode (the default) <command>rpcclient</command> displays a
+ prompt of the form '[domain\username@host]$' </para></listitem>
+ </varlistentry>
+
+
+
+ <varlistentry>
+ <term>-c 'command string'</term>
+ <listitem><para>execute semicolon separated commands (listed
+ below)) </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-t terminalcode</term>
+ <listitem><para>This tells the Samba client how to interpret
+ the incoming filenames, in regards to character sets. The list
+ here is not complete. For a complete list see your local Samba
+ source. Some valid options are sjis, euc, jis7, jis8, junet
+ and hex. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-O socket options</term>
+ <listitem><para>These socket options are the same as in
+ <filename>smb.conf</filename> (under the <parameter>socket options
+ </parameter> section). </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-s smb.conf</term>
+ <listitem><para>Specifies the location of the all important
+ <filename>smb.conf</filename> file. </para></listitem>
+ </varlistentry>
+
+
+
+ <varlistentry>
+ <term>-i scope</term>
+ <listitem><para>Defines the NetBIOS scope. For more
+ information on NetBIOS scopes, see rfc1001 and rfc1002. NetBIOS
+ scopes are rarely used. </para></listitem>
+ </varlistentry>
+ </variablelist>
+</refsect1>
+
+
+<refsect1>
+ <title>COMMANDS</title>
+
+ <para><emphasis>SPOOLSS Commands</emphasis></para>
+
+ <itemizedlist>
+ <listitem><para><command>spoolenum</command> - Execute an EnumPrinters()
+ call. This lists the various installed and share printers. Refer
+ to the MS Platform SDK documentation for more details of the various
+ flags and calling options. </para></listitem>
+
+ <listitem><para><command>spoolenumports level
+ </command> - Executes an EnumPorts() call using the specified
+ info level. Currently only info level 1 and 2 are supported.
+ </para></listitem>
+
+ <listitem><para><command>spoolenumdata</command> - Enumerate all
+ printer setting data stored on the server. On Windows NT clients,
+ these values are stored in the registry, while Samba servers
+ store them in the printers TDB. This command corresponds
+ to the MS Platform SDK GetPrinterData() function. </para></listitem>
+
+ <listitem><para><command>spooljobs printer</command> - List the jobs
+ and status of a given printer.
+ This command corresponds to the MS Platform SDK EnumJobs()
+ function. </para></listitem>
+
+ <listitem><para><command>spoolopen printer
+ </command> - Execute an OpenPrinterEx() and ClosePrinter() RPC
+ against a given printer. </para></listitem>
+
+ <listitem><para><command>spoolgetdata printer
+ </command> - Retrieve the data for a given printer setting. See
+ the <command>spoolenumdata</command> command for more information.
+ This command corresponds to the GetPrinterData() MS Platform
+ SDK function. </para></listitem>
+
+ <listitem><para><command>spoolgetprinter printer
+ </command> - Retrieve the current printer information. This command
+ corresponds to the GetPrinter() MS Platform SDK function.
+ </para></listitem>
+
+ <listitem><para><command>spoolgetprinterdriver
+ printer</command> - Retrieve the printer driver information
+ (such as driver file, config file, dependent files, etc...) for
+ the given printer. This command corresponds to the GetPrinterDriver()
+ MS Platform SDK function. </para></listitem>
+
+ <listitem><para><command>spoolgetprinterdriverdir
+ arch</command> - Execute a GetPrinterDriverDirectory()
+ RPC to retreive the SMB share name and subdirectory for
+ storing printer driver files for a given architecture. Possible
+ values for <parameter>arch</parameter> are "Windows 4.0"
+ (for Windows 95/98), "Windows NT x86", "Windows NT PowerPC", "Windows
+ Alpha_AXP", and "Windows NT R4000". </para></listitem>
+
+ <listitem><para><command>spooladdprinterdriver
+ arch config</command> - Execute an
+ AddPrinterDriver() RPC to install the printer driver information
+ on the server. Note that the driver files should already exist
+ in the directory returned by spoolgetprinterdriverdir. Possible
+ values for <parameter>arch</parameter> are the same as those for
+ the <command>spooolgetprintedriverdir</command> command.
+ The <parameter>config</parameter> parameter is defined as
+ follows: </para>
+
+ <para><programlisting>
+Long Printer Name:\
+Driver File Name:\
+Data File Name:\
+Config File Name:\
+Help File Name:\
+Language Monitor Name:\
+Default Data Type:\
+Comma Separated list of Files
+ </programlisting></para>
+
+ <para>Any empty fields should be enter as the string "NULL". </para>
+
+ <para>Samba does not need to support the concept of Print Monitors
+ since these only apply to local printers whose driver can make
+ use of a bi-directional link for communication. This field should
+ be "NULL". On a remote NT print server, the Print Monitor for a
+ driver must already be installed prior to adding the driver or
+ else the RPC will fail. </para></listitem>
+
+
+ <listitem><para><command>spooladdprinter printername
+ sharename drivername port
+ </command> - Add a printer on the remote server. This printer
+ will be automatically shared. Be aware that the printer driver
+ must already be installed on the server (see addprinterdriver)
+ and the <parameter>port</parameter>must be a valid port name. </para>
+ </listitem>
+
+ </itemizedlist>
+
+
+ <para><emphasis>SPOOLSS Commands</emphasis></para>
+
+ <itemizedlist>
+ <listitem><para><command>set</command> - Set miscellaneous
+ <command>rpcclient</command> command line options during a
+ running session. </para></listitem>
+
+ <listitem><para><command>use</command> - Connect to a rmeote SMB
+ server. <command>rpcclient</command> has the ability to
+ maintain connections to multiple server simulaneously. </para></listitem>
+
+ <listitem><para><command>help</command> - Print a listing of all
+ known commands or extended help on a particular command.
+ </para></listitem>
+
+ <listitem><para><command>quit</command> - Exit <command>rpcclient
+ </command>
+ </para></listitem>
+ </itemizedlist>
+
+
+</refsect1>
+
+<refsect1>
+ <title>BUGS</title>
+
+ <para><command>rpcclient</command> is designed as a developer testing tool
+ and may not be robust in certain areas (such as command line parsing).
+ It has been known to generate a core dump upon failures when invalid
+ parameters where passed to the interpreter. </para>
+
+ <para>From Luke Leighton's original rpcclient man page:</para>
+
+ <para><emphasis>"WARNING!</emphasis> The MSRPC over SMB code has
+ been developed from examining Network traces. No documentation is
+ available from the original creators (Microsoft) on how MSRPC over
+ SMB works, or how the individual MSRPC services work. Microsoft's
+ implementation of these services has been demonstrated (and reported)
+ to be... a bit flakey in places. </para>
+
+ <para>The development of Samba's implementation is also a bit rough,
+ and as more of the services are understood, it can even result in
+ versions of <command>smbd(8)</command> and <command>rpcclient</command>
+ that are incompatible for some commands or services. Additionally,
+ the developers are sending reports to Microsoft, and problems found
+ or reported to Microsoft are fixed in Service Packs, which may
+ result in incompatibilities." </para>
+</refsect1>
+
+
+<refsect1>
+ <title>VERSION</title>
+
+ <para>This man page is correct for version 2.2 of
+ the Samba suite.</para>
+</refsect1>
+
+<refsect1>
+ <title>AUTHOR</title>
+
+ <para>The original Samba software and related utilities
+ were created by Andrew Tridgell. Samba is now developed
+ by the Samba Team as an Open Source project similar
+ to the way the Linux kernel is developed.</para>
+
+ <para>The original rpcclient man page was written by Matthew Geddes,
+ Luke Kenneth Casson, and Gerald Carter. The conversion to
+ DocBook for Samba 2.2 was done by Gerald Carter</para>
+</refsect1>
+
+</refentry>
diff --git a/docs/docbook/manpages/smbclient.1.sgml b/docs/docbook/manpages/smbclient.1.sgml
index 008a63bf08..7618ad451c 100644
--- a/docs/docbook/manpages/smbclient.1.sgml
+++ b/docs/docbook/manpages/smbclient.1.sgml
@@ -1,634 +1,1017 @@
-<!--
-
- I am looking for help to finish SGML.
-
--->
-<!-- manual page source format generated by PolyglotMan v3.0.9
- available via anonymous ftp from ftp.cs.berkeley.edu:/ucb/people/phelps/tcltk/rman.tar.Z -->
-
-<RefEntry ID="smbclient.">
-<RefMeta><RefEntryTitle>"smbclient</RefEntryTitle><ManVolNum>"</ManVolNum></RefMeta>
-
-
-
-<Para><RefNameDiv><Title>Name</Title>smbclient </RefEntry><RefPurpose> ftp-like client to access SMB/CIFS resources on servers
-
-<Para></RefSect1>
-
-<RefSynopsisDiv><Title>Synopsis</Title>
-
-<Para><B>smbclient</B>
-servicename [-s smb.conf] [-O socket options][-R name resolve order] [-M NetBIOS
-name] [-i scope] [-N] [-n NetBIOS name] [-d debuglevel] [-P] [-p port] [-l log
-basename] [-h] [-I dest IP] [-E] [-U username] [-L NetBIOS name] [-t terminal
-code] [-m max protocol] [-b buffersize] [-W workgroup] [-T&lt;c|x&gt;IXFqgbNan] [-D directory]
-[-c command string]
-
-<Para></RefSect1>
-
-<RefSect1><Title>Description</Title>
-
-<Para>This program is part of the <B>Samba</B> suite.
-
-<Para><B>smbclient</B>
-is a client that can 'talk' to an SMB/CIFS server. It offers an interface
-similar to that of the ftp program (see <B><Command>ftp (1)</B></Command>). Operations include things
-like getting files from the server to the local machine, putting files
-from the local machine to the server, retrieving directory information
-from the server and so on.
-
-<Para></RefSect1>
-
-<RefSect1><Title>Options</Title>
-
-<Para><ItemizedList MARK=Bullet>
-<Term><B>servicename</B></Term><ListItem><Para>servicename is the name of
-the service you want to use on the server. A service name takes the form
-CW//server/service where <I>server</I> is the NetBIOS name of the SMB/CIFS server
-offering the desired service and <I>service</I> is the name of the service offered.
-Thus to connect to the service <I>printer</I> on the SMB/CIFS server <I>smbserver</I>,
-you would use the servicename </Para></ListItem>
-<Term>CW//smbserver/printer </Term><ListItem><Para></Para></ListItem>
-<Term>Note that the server
-name required is NOT necessarily the IP (DNS) </Term><ListItem><Para>host name of the server !
-The name required is a NetBIOS server name, which may or may not be the
-same as the IP hostname of the machine running the server. </Para></ListItem>
-<Term>The server name
-is looked up according to either the </Term><ListItem><Para><B>-R</B> parameter to <B>smbclient</B> or using
-the <B>name resolve order</B> parameter in the smb.conf file, allowing an administrator
-to change the order and methods by which server names are looked up. </Para></ListItem>
-<Term><B>password</B></Term><ListItem><Para>password
-is the password required to access the specified service on the specified
-server. If this parameter is supplied, the <B>-N</B> option (suppress password prompt)
-is assumed. </Para></ListItem>
-<Term>There is no default password. If no password is supplied on the
-</Term><ListItem><Para>command line (either by using this parameter or adding a password to the
-<B>-U</B> option (see below)) and the <B>-N</B> option is not specified, the client will
-prompt for a password, even if the desired service does not require one.
-(If no password is required, simply press ENTER to provide a null password.)
-</Para></ListItem>
-<Term>Note: Some servers (including OS/2 and Windows for Workgroups) insist </Term><ListItem><Para>on
-an uppercase password. Lowercase or mixed case passwords may be rejected
-by these servers. </Para></ListItem>
-<Term>Be cautious about including passwords in scripts. </Term><ListItem><Para></Para></ListItem>
-<Term><B>-s smb.conf</B></Term><ListItem><Para>This
-parameter specifies the pathname to the Samba configuration file, smb.conf.
-This file controls all aspects of the Samba setup on the machine and smbclient
-also needs to read this file. </Para></ListItem>
-<Term><B>-O socket options</B></Term><ListItem><Para>TCP socket options to set
-on the client socket. See the socket options parameter in the <B><Command>smb.conf (5)</B></Command>
-manpage for the list of valid options. </Para></ListItem>
-<Term><B>-R name resolve order</B></Term><ListItem><Para>This option allows
-the user of smbclient to determine what name resolution services to use
-when looking up the NetBIOS name of the host being connected to. </Para></ListItem>
-<Term>The options
-are :"lmhosts", "host", "wins" and "bcast". They cause </Term><ListItem><Para>names to be resolved
-as follows : </Para></ListItem>
-<Term>o</Term><ListItem><Para><B>lmhosts</B> : Lookup an IP address in the Samba lmhosts file.
-The lmhosts file is stored in the same directory as the <B>smb.conf</B> file. </Para></ListItem>
-<Term>o</Term><ListItem><Para><B>host</B>
-: Do a standard host name to IP address resolution, using the system /etc/hosts,
-NIS, or DNS lookups. This method of name resolution is operating system
-depended for instance on IRIX or Solaris this may be controlled by the
-<I>/etc/nsswitch.conf</I> file). </Para></ListItem>
-<Term>o</Term><ListItem><Para><B>wins</B> : Query a name with the IP address listed
-in the <B>wins server</B> parameter in the smb.conf file. If no WINS server has
-been specified this method will be ignored. </Para></ListItem>
-<Term>o</Term><ListItem><Para><B>bcast</B> : Do a broadcast on each
-of the known local interfaces listed in the <B>interfaces</B> parameter in the
-smb.conf file. This is the least reliable of the name resolution methods
-as it depends on the target host being on a locally connected subnet. </Para></ListItem>
-<Term>If
-this parameter is not set then the name resolve order defined </Term><ListItem><Para>in the <B>smb.conf</B>
-file parameter (<B>name resolve order</B>) will be used. </Para></ListItem>
-<Term>The default order is
-lmhosts, host, wins, bcast and without this </Term><ListItem><Para>parameter or any entry in the
-<B>"name resolve order"</B> parameter of the <B>smb.conf</B> file the name resolution
-methods will be attempted in this order. </Para></ListItem>
-<Term><B>-M NetBIOS name</B></Term><ListItem><Para>This options allows
-you to send messages, using the "WinPopup" protocol, to another computer.
-Once a connection is established you then type your message, pressing ^D
-(control-D) to end. </Para></ListItem>
-<Term>If the receiving computer is running WinPopup the user
-will receive </Term><ListItem><Para>the message and probably a beep. If they are not running WinPopup
-the message will be lost, and no error message will occur. </Para></ListItem>
-<Term>The message is
-also automatically truncated if the message is over </Term><ListItem><Para>1600 bytes, as this
-is the limit of the protocol. </Para></ListItem>
-<Term>One useful trick is to cat the message through
-<B>smbclient</B>. </Term><ListItem><Para>For example: </Para></ListItem>
-<Term>CWcat mymessage.txt | smbclient -M FRED </Term><ListItem><Para></Para></ListItem>
-<Term>will send the
-message in the file <I>mymessage.txt</I> to the machine FRED. </Term><ListItem><Para></Para></ListItem>
-<Term>You may also find
-the <B>-U</B> and <B>-I</B> options useful, as they allow </Term><ListItem><Para>you to control the FROM and TO
-parts of the message. </Para></ListItem>
-<Term>See the <B>message command</B> </Term><ListItem><Para>parameter in the <B><Command>smb.conf (5)</B></Command>
-for a description of how to handle incoming WinPopup messages in Samba.
-</Para></ListItem>
-<Term>Note: Copy WinPopup into the startup group on your WfWg PCs if you </Term><ListItem><Para>want
-them to always be able to receive messages. </Para></ListItem>
-<Term><B>-i scope</B></Term><ListItem><Para>This specifies a NetBIOS
-scope that smbclient will use to communicate with when generating NetBIOS
-names. For details on the use of NetBIOS scopes, see rfc1001.txt and rfc1002.txt.
-NetBIOS scopes are <I>very</I> rarely used, only set this parameter if you are
-the system administrator in charge of all the NetBIOS systems you communicate
-with. </Para></ListItem>
-<Term><B>-N</B></Term><ListItem><Para>If specified, this parameter suppresses the normal password prompt
-from the client to the user. This is useful when accessing a service that
-does not require a password. </Para></ListItem>
-<Term>Unless a password is specified on the command
-line or this parameter </Term><ListItem><Para>is specified, the client will request a password.
-</Para></ListItem>
-<Term><B>-n NetBIOS name</B></Term><ListItem><Para>By default, the client will use the local machine's hostname
-(in uppercase) as its NetBIOS name. This parameter allows you to override
-the host name and use whatever NetBIOS name you wish. </Para></ListItem>
-<Term><B>-d debuglevel</B></Term><ListItem><Para>debuglevel
-is an integer from 0 to 10, or the letter 'A'. </Para></ListItem>
-<Term>The default value if this parameter
-is not specified is zero. </Term><ListItem><Para></Para></ListItem>
-<Term>The higher this value, the more detail will be
-logged to the log files </Term><ListItem><Para>about the activities of the client. At level 0,
-only critical errors and serious warnings will be logged. Level 1 is a reasonable
-level for day to day running - it generates a small amount of information
-about operations carried out. </Para></ListItem>
-<Term>Levels above 1 will generate considerable
-amounts of log data, and </Term><ListItem><Para>should only be used when investigating a problem.
-Levels above 3 are designed for use only by developers and generate HUGE
-amounts of log data, most of which is extremely cryptic. If debuglevel is
-set to the letter 'A', then <I>all</I> debug messages will be printed. This setting
-is for developers only (and people who <I>really</I> want to know how the code
-works internally). </Para></ListItem>
-<Term>Note that specifying this parameter here will override
-the <B>log </B></Term><ListItem><Para>level parameter in the <B><Command>smb.conf (5)</B></Command> file. </Para></ListItem>
-<Term><B>-P</B></Term><ListItem><Para>This option is no longer
-used. The code in Samba2.0 now lets the server decide the device type, so
-no printer specific flag is needed. </Para></ListItem>
-<Term><B>-p port</B></Term><ListItem><Para>This number is the TCP port number
-that will be used when making connections to the server. The standard (well-known)
-TCP port number for an SMB/CIFS server is 139, which is the default. </Para></ListItem>
-<Term><B>-l logfilename</B></Term><ListItem><Para>If
-specified, logfilename specifies a base filename into which operational
-data from the running client will be logged. </Para></ListItem>
-<Term>The default base name is specified
-at compile time. </Term><ListItem><Para></Para></ListItem>
-<Term>The base name is used to generate actual log file names.
-For example, </Term><ListItem><Para>if the name specified was "log", the debug file would be CWlog.client.
-</Para></ListItem>
-<Term>The log file generated is never removed by the client. </Term><ListItem><Para></Para></ListItem>
-<Term><B>-h</B></Term><ListItem><Para>Print the usage
-message for the client. </Para></ListItem>
-<Term><B>-I IP address</B></Term><ListItem><Para>IP address is the address of the server
-to connect to. It should be specified in standard "a.b.c.d" notation. </Para></ListItem>
-<Term>Normally
-the client would attempt to locate a named SMB/CIFS server by </Term><ListItem><Para>looking it
-up via the NetBIOS name resolution mechanism described above in the <B>name
-resolve order</B> parameter above. Using this parameter will force the client
-to assume that the server is on the machine with the specified IP address
-and the NetBIOS name component of the resource being connected to will
-be ignored. </Para></ListItem>
-<Term>There is no default for this parameter. If not supplied, it will
-be </Term><ListItem><Para>determined automatically by the client as described above. </Para></ListItem>
-<Term><B>-E</B></Term><ListItem><Para>This parameter
-causes the client to write messages to the standard error stream (stderr)
-rather than to the standard output stream. </Para></ListItem>
-<Term>By default, the client writes
-messages to standard output - typically </Term><ListItem><Para>the user's tty. </Para></ListItem>
-<Term><B>-U username</B></Term><ListItem><Para>This specifies
-the user name that will be used by the client to make a connection, assuming
-your server is not a downlevel server that is running a protocol level
-that uses passwords on shares, not on usernames. </Para></ListItem>
-<Term>Some servers are fussy
-about the case of this name, and some insist </Term><ListItem><Para>that it must be a valid NetBIOS
-name. </Para></ListItem>
-<Term>If no username is supplied, it will default to an uppercase version
-of </Term><ListItem><Para>the environment variable CWUSER or CWLOGNAME in that order. If no username
-is supplied and neither environment variable exists the username "GUEST"
-will be used. </Para></ListItem>
-<Term>If the CWUSER environment variable contains a '%' character,
-</Term><ListItem><Para>everything after that will be treated as a password. This allows you to
-set the environment variable to be CWUSER=username%password so that a password
-is not passed on the command line (where it may be seen by the ps command).
-</Para></ListItem>
-<Term>You can specify a domain name as part of the username by using a </Term><ListItem><Para>username
-of the form "DOMAIN/user" or "DOMAIN\user". </Para></ListItem>
-<Term>If the service you are connecting
-to requires a password, it can be </Term><ListItem><Para>supplied using the <B>-U</B> option, by appending
-a percent symbol ("%") then the password to username. For example, to attach
-to a service as user CW"fred" with password CW"secret", you would specify.
- <BR>
-</Para></ListItem>
-<Term>CW-U fred%secret </Term><ListItem><Para><BR>
-</Para></ListItem>
-<Term>on the command line. Note that there are no spaces around the percent </Term><ListItem><Para>symbol.
-</Para></ListItem>
-<Term>If you specify the password as part of username then the <B>-N</B> option </Term><ListItem><Para>(suppress
-password prompt) is assumed. </Para></ListItem>
-<Term>If you specify the password as a parameter
-<I>AND</I> as part of username </Term><ListItem><Para>then the password as part of username will take
-precedence. Putting nothing before or nothing after the percent symbol will
-cause an empty username or an empty password to be used, respectively. </Para></ListItem>
-<Term>The
-password may also be specified by setting up an environment </Term><ListItem><Para>variable called
-CWPASSWD that contains the users password. Note that this may be very insecure
-on some systems but on others allows users to script smbclient commands
-without having a password appear in the command line of a process listing.
-</Para></ListItem>
-<Term>A third option is to use a credentials file which contains </Term><ListItem><Para>the plaintext
-of the username and password. This option is mainly provided for scripts
-where the admin doesn't desire to pass the credentials on the command line
-or via environment variables. If this method is used, make certain that
-the permissions on the file restrict access from unwanted users. See the
-<B>-A</B> for more details. </Para></ListItem>
-<Term>Note: Some servers (including OS/2 and Windows for Workgroups)
-insist </Term><ListItem><Para>on an uppercase password. Lowercase or mixed case passwords may be
-rejected by these servers. </Para></ListItem>
-<Term>Be cautious about including passwords in scripts
-or in the </Term><ListItem><Para>CWPASSWD environment variable. Also, on many systems the command
-line of a running process may be seen via the CWps command to be safe always
-allow smbclient to prompt for a password and type it in directly. </Para></ListItem>
-<Term><B>-A &lt;filename&gt;</B></Term><ListItem><Para>This
-option allows you to specify a file from which to read the username and
-password used in the connection. The format of the file is </Para></ListItem>
-<Term>CWusername =
-&lt;value&gt; </Term><ListItem><Para><BR>
-CWpassword = &lt;value <BR>
-</Para></ListItem>
-<Term>Make certain that the permissions on the file restrict access from </Term><ListItem><Para>unwanted
-users. </Para></ListItem>
-<Term><B>-L</B></Term><ListItem><Para>This option allows you to look at what services are available on
-a server. You use it as CW"smbclient -L host" and a list should appear. The
-<B>-I</B> option may be useful if your NetBIOS names don't match your tcp/ip dns
-host names or if you are trying to reach a host on another network. </Para></ListItem>
-<Term><B>-t terminal
-code</B></Term><ListItem><Para>This option tells smbclient how to interpret filenames coming from
-the remote server. Usually Asian language multibyte UNIX implementations
-use different character sets than SMB/CIFS servers (<I>EUC</I> instead of <I>SJIS</I>
-for example). Setting this parameter will let smbclient convert between
-the UNIX filenames and the SMB filenames correctly. This option has not
-been seriously tested and may have some problems. </Para></ListItem>
-<Term>The terminal codes include
-CWsjis, CWeuc, CWjis7, CWjis8, </Term><ListItem><Para>CWjunet, CWhex, CWcap. This is not a complete
-list, check the Samba source code for the complete list. </Para></ListItem>
-<Term><B>-m max protocol
-level</B></Term><ListItem><Para>With the new code in Samba2.0, <B>smbclient</B> always attempts to connect
-at the maximum protocols level the server supports. This parameter is preserved
-for backwards compatibility, but any string following the <B>-m</B> will be ignored.
-</Para></ListItem>
-<Term><B>-b buffersize</B></Term><ListItem><Para>This option changes the transmit/send buffer size when getting
-or putting a file from/to the server. The default is 65520 bytes. Setting
-this value smaller (to 1200 bytes) has been observed to speed up file transfers
-to and from a Win9x server. </Para></ListItem>
-<Term><B>-W WORKGROUP</B></Term><ListItem><Para>Override the default workgroup specified
-in the <B>workgroup</B> parameter of the <B>smb.conf</B> file for this connection. This
-may be needed to connect to some servers. </Para></ListItem>
-<Term><B>-T tar options</B></Term><ListItem><Para>smbclient may be
-used to create <B><Command>tar (1)</B></Command> compatible backups of all the files on an SMB/CIFS
-share. The secondary tar flags that can be given to this option are : </Para></ListItem>
-<Term><B>c</B></Term><ListItem><Para>Create
-a tar file on UNIX. Must be followed by the name of a tar file, tape device
-or CW"-" for standard output. If using standard output you must turn the
-log level to its lowest value CW-d0 to avoid corrupting your tar file. This
-flag is mutually exclusive with the <B>x</B> flag. </Para></ListItem>
-<Term><B>x</B></Term><ListItem><Para>Extract (restore) a local tar
-file back to a share. Unless the <B>-D</B> option is given, the tar files will be
-restored from the top level of the share. Must be followed by the name of
-the tar file, device or CW"-" for standard input. Mutually exclusive with
-the <B>c</B> flag. Restored files have their creation times (mtime) set to the
-date saved in the tar file. Directories currently do not get their creation
-dates restored properly. </Para></ListItem>
-<Term><B>I</B></Term><ListItem><Para>Include files and directories. Is the default behavior
-when filenames are specified above. Causes tar files to be included in an
-extract or create (and therefore everything else to be excluded). See example
-below. Filename globbing works in one of two ways. See <B>r</B> below. </Para></ListItem>
-<Term><B>X</B></Term><ListItem><Para>Exclude
-files and directories. Causes tar files to be excluded from an extract or
-create. See example below. Filename globbing works in one of two ways now.
-See <B>r</B> below. </Para></ListItem>
-<Term><B>b</B></Term><ListItem><Para>Blocksize. Must be followed by a valid (greater than zero)
-blocksize. Causes tar file to be written out in blocksize*TBLOCK (usually
-512 byte) blocks. </Para></ListItem>
-<Term><B>g</B></Term><ListItem><Para>Incremental. Only back up files that have the archive
-bit set. Useful only with the <B>c</B> flag. </Para></ListItem>
-<Term><B>q</B></Term><ListItem><Para>Quiet. Keeps tar from printing diagnostics
-as it works. This is the same as tarmode quiet. </Para></ListItem>
-<Term><B>r</B></Term><ListItem><Para>Regular expression include
-or exclude. Uses regular regular expression matching for excluding or
-excluding files if compiled with HAVE_REGEX_H. However this mode can be
-very slow. If not compiled with HAVE_REGEX_H, does a limited wildcard match
-on * and ?. </Para></ListItem>
-<Term><B>N</B></Term><ListItem><Para>Newer than. Must be followed by the name of a file whose date
-is compared against files found on the share during a create. Only files
-newer than the file specified are backed up to the tar file. Useful only
-with the <B>c</B> flag. </Para></ListItem>
-<Term><B>a</B></Term><ListItem><Para>Set archive bit. Causes the archive bit to be reset when
-a file is backed up. Useful with the <B>g</B> and <B>c</B> flags. </Para></ListItem>
-<Term><I>Tar Long File Names</I> </Term><ListItem><Para></Para></ListItem>
-<Term>smbclient's
-tar option now supports long file names both on backup and </Term><ListItem><Para>restore. However,
-the full path name of the file must be less than 1024 bytes. Also, when
-a tar archive is created, smbclient's tar option places all files in the
-archive with relative names, not absolute names. </Para></ListItem>
-<Term><I>Tar Filenames</I> </Term><ListItem><Para></Para></ListItem>
-<Term>All file
-names can be given as DOS path names (with CW\ as the </Term><ListItem><Para>component separator)
-or as UNIX path names (with CW/ as the component separator). </Para></ListItem>
-<Term><I>Examples</I> </Term><ListItem><Para></Para></ListItem>
-<Term>o</Term><ListItem><Para>Restore
-from tar file backup.tar into myshare on mypc (no password on share). </Para></ListItem>
-<Term>CWsmbclient
-//mypc/myshare "" -N -Tx backup.tar </Term><ListItem><Para></Para></ListItem>
-<Term>o</Term><ListItem><Para>Restore everything except users/docs
-</Para></ListItem>
-<Term>CWsmbclient //mypc/myshare "" -N -TXx backup.tar users/docs </Term><ListItem><Para></Para></ListItem>
-<Term>o</Term><ListItem><Para>Create a tar
-file of the files beneath users/docs. </Para></ListItem>
-<Term>CWsmbclient //mypc/myshare "" -N -Tc
-backup.tar users/docs </Term><ListItem><Para></Para></ListItem>
-<Term>o</Term><ListItem><Para>Create the same tar file as above, but now use a
-DOS path name. </Para></ListItem>
-<Term>CWsmbclient //mypc/myshare "" -N -tc backup.tar users\edocs </Term><ListItem><Para></Para></ListItem>
-<Term>o</Term><ListItem><Para>Create
-a tar file of all the files and directories in the share. </Para></ListItem>
-<Term>CWsmbclient //mypc/myshare
-"" -N -Tc backup.tar * </Term><ListItem><Para></Para></ListItem>
-<Term><B>-D initial directory</B></Term><ListItem><Para>Change to initial directory before
-starting. Probably only of any use with the tar <B>-T</B> option. </Para></ListItem>
-<Term><B>-c command string</B></Term><ListItem><Para>command
-string is a semicolon separated list of commands to be executed instead
-of prompting from stdin. <B>-N</B> is implied by <B>-c</B>. </Para></ListItem>
-<Term>This is particularly useful in
-scripts and for printing stdin to the </Term><ListItem><Para>server, e.g. CW-c 'print -'. </Para></ListItem>
-</ItemizedList>
-
-
-<Para></RefSect1>
-
-<RefSect1><Title>Operations</Title>
-
-<Para>Once
-the client is running, the user is presented with a prompt :
-
-<Para>CWsmb:\&gt;
-
-<Para>The
-backslash ("\") <ItemizedList MARK=Bullet>
-<Term>indicates the current working directory on the </Term><ListItem><Para>server, and
-will change if the current working directory is changed. </Para></ListItem>
-</ItemizedList>
-
-
-<Para>The prompt indicates
-that the client is ready and waiting to carry out a user command. Each command
-is a single word, optionally followed by parameters specific to that command.
-Command and parameters are space-delimited unless these notes specifically
-state otherwise. All commands are case-insensitive. Parameters to commands
-may or may not be case sensitive, depending on the command.
-
-<Para>You can specify
-file names which have spaces in them by quoting the name with double quotes,
-for example "a long file name".
-
-<Para>Parameters shown in square brackets (e.g.,
-"[parameter]") are optional. If not given, the command will use suitable
-defaults. Parameters shown in angle brackets (e.g., "&lt;parameter&gt;") are required.
-
-
-<Para>Note that all commands operating on the server are actually performed by
-issuing a request to the server. Thus the behavior may vary from server
-to server, depending on how the server was implemented.
-
-<Para>The commands available
-are given here in alphabetical order.
-
-<Para><ItemizedList MARK=Bullet>
-<Term><B>? [command]</B></Term><ListItem><Para>If "command" is specified,
-the <B>?</B> command will display a brief informative message about the specified
-command. If no command is specified, a list of available commands will
-be displayed. </Para></ListItem>
-<Term><B>! [shell command]</B></Term><ListItem><Para>If "shell command" is specified, the <B>!</B> command
-will execute a shell locally and run the specified shell command. If no
-command is specified, a local shell will be run. </Para></ListItem>
-<Term><B>cd [directory name]</B></Term><ListItem><Para>If "directory
-name" is specified, the current working directory on the server will be
-changed to the directory specified. This operation will fail if for any
-reason the specified directory is inaccessible. </Para></ListItem>
-<Term>If no directory name is
-specified, the current working directory on </Term><ListItem><Para>the server will be reported.
-</Para></ListItem>
-<Term><B>del &lt;mask&gt;</B></Term><ListItem><Para>The client will request that the server attempt to delete all files
-matching "mask" from the current working directory on the server. </Para></ListItem>
-<Term><B>dir &lt;mask&gt;</B></Term><ListItem><Para>A
-list of the files matching "mask" in the current working directory on the
-server will be retrieved from the server and displayed. </Para></ListItem>
-<Term><B>exit</B></Term><ListItem><Para>Terminate the
-connection with the server and exit from the program. </Para></ListItem>
-<Term><B>get &lt;remote file name&gt;
-[local file name]</B></Term><ListItem><Para>Copy the file called "remote file name" from the server
-to the machine running the client. If specified, name the local copy "local
-file name". Note that all transfers in smbclient are binary. See also the
-<B>lowercase</B> command. </Para></ListItem>
-<Term><B>help [command]</B></Term><ListItem><Para>See the <B>?</B> command above. </Para></ListItem>
-<Term><B>lcd [directory
-name]</B></Term><ListItem><Para>If "directory name" is specified, the current working directory on
-the local machine will be changed to the directory specified. This operation
-will fail if for any reason the specified directory is inaccessible. </Para></ListItem>
-<Term>If
-no directory name is specified, the name of the current working </Term><ListItem><Para>directory
-on the local machine will be reported. </Para></ListItem>
-<Term><B>lowercase</B></Term><ListItem><Para>Toggle lowercasing of filenames
-for the <B>get</B> and <B>mget</B> commands. </Para></ListItem>
-<Term>When lowercasing is toggled ON, local filenames
-are converted to </Term><ListItem><Para>lowercase when using the <B>get</B> and <B>mget</B> commands. This is
-often useful when copying (say) MSDOS files from a server, because lowercase
-filenames are the norm on UNIX systems. </Para></ListItem>
-<Term><B>ls &lt;mask&gt;</B></Term><ListItem><Para>See the <B>dir</B> command above.
-</Para></ListItem>
-<Term><B>mask &lt;mask&gt;</B></Term><ListItem><Para>This command allows the user to set up a mask which will be used
-during recursive operation of the <B>mget</B> and <B>mput</B> commands. </Para></ListItem>
-<Term>The masks specified
-to the <B>mget</B> and </Term><ListItem><Para><B>mput</B> commands act as filters for directories rather than
-files when recursion is toggled ON. </Para></ListItem>
-<Term>The mask specified with the .B mask command
-is necessary to filter </Term><ListItem><Para>files within those directories. For example, if the
-mask specified in an <B>mget</B> command is "source*" and the mask specified with
-the mask command is "*.c" and recursion is toggled ON, the <B>mget</B> command
-will retrieve all files matching "*.c" in all directories below and including
-all directories matching "source*" in the current working directory. </Para></ListItem>
-<Term>Note
-that the value for mask defaults to blank (equivalent to "*") and </Term><ListItem><Para>remains
-so until the mask command is used to change it. It retains the most recently
-specified value indefinitely. To avoid unexpected results it would be wise
-to change the value of .I mask back to "*" after using the <B>mget</B> or <B>mput</B>
-commands. </Para></ListItem>
-<Term><B>md &lt;directory name&gt;</B></Term><ListItem><Para>See the <B>mkdir</B> command. </Para></ListItem>
-<Term><B>mget &lt;mask&gt;</B></Term><ListItem><Para>Copy all files
-matching mask from the server to the machine running the client. </Para></ListItem>
-<Term>Note that
-mask is interpreted differently during recursive operation </Term><ListItem><Para>and non-recursive
-operation - refer to the <B>recurse</B> and <B>mask</B> commands for more information.
-Note that all transfers in .B smbclient are binary. See also the <B>lowercase</B>
-command. </Para></ListItem>
-<Term><B>mkdir &lt;directory name&gt;</B></Term><ListItem><Para>Create a new directory on the server (user
-access privileges permitting) with the specified name. </Para></ListItem>
-<Term><B>mput &lt;mask&gt;</B></Term><ListItem><Para>Copy all
-files matching mask in the current working directory on the local machine
-to the current working directory on the server. </Para></ListItem>
-<Term>Note that mask is interpreted
-differently during recursive operation </Term><ListItem><Para>and non-recursive operation - refer
-to the <B>recurse</B> and <B>mask</B> commands for more information. Note that all transfers
-in .B smbclient are binary. </Para></ListItem>
-<Term><B>print &lt;file name&gt;</B></Term><ListItem><Para>Print the specified file from
-the local machine through a printable service on the server. </Para></ListItem>
-<Term>See also the
-<B>printmode</B> command. </Term><ListItem><Para></Para></ListItem>
-<Term><B>printmode &lt;graphics or text&gt;</B></Term><ListItem><Para>Set the print mode to suit
-either binary data (such as graphical information) or text. Subsequent print
-commands will use the currently set print mode. </Para></ListItem>
-<Term><B>prompt</B></Term><ListItem><Para>Toggle prompting for
-filenames during operation of the <B>mget</B> and <B>mput</B> commands. </Para></ListItem>
-<Term>When toggled ON,
-the user will be prompted to confirm the transfer of </Term><ListItem><Para>each file during these
-commands. When toggled OFF, all specified files will be transferred without
-prompting. </Para></ListItem>
-<Term><B>put &lt;local file name&gt; [remote file name]</B></Term><ListItem><Para>Copy the file called "local
-file name" from the machine running the client to the server. If specified,
-name the remote copy "remote file name". Note that all transfers in smbclient
-are binary. See also the <B>lowercase</B> command. </Para></ListItem>
-<Term><B>queue</B></Term><ListItem><Para>Displays the print queue,
-showing the job id, name, size and current status. </Para></ListItem>
-<Term><B>quit</B></Term><ListItem><Para>See the <B>exit</B> command.
-</Para></ListItem>
-<Term><B>rd &lt;directory name&gt;</B></Term><ListItem><Para>See the <B>rmdir</B> command. </Para></ListItem>
-<Term><B>recurse</B></Term><ListItem><Para>Toggle directory recursion
-for the commands <B>mget</B> and <B>mput</B>. </Para></ListItem>
-<Term>When toggled ON, these commands will process
-all directories in the </Term><ListItem><Para>source directory (i.e., the directory they are copying
-.IR from ) and will recurse into any that match the mask specified to the
-command. Only files that match the mask specified using the <B>mask</B> command
-will be retrieved. See also the <B>mask</B> command. </Para></ListItem>
-<Term>When recursion is toggled OFF,
-only files from the current working </Term><ListItem><Para>directory on the source machine that
-match the mask specified to the <B>mget</B> or <B>mput</B> commands will be copied, and
-any mask specified using the <B>mask</B> command will be ignored. </Para></ListItem>
-<Term><B>rm &lt;mask&gt;</B></Term><ListItem><Para>Remove
-all files matching mask from the current working directory on the server.
-</Para></ListItem>
-<Term><B>rmdir &lt;directory name&gt;</B></Term><ListItem><Para>Remove the specified directory (user access privileges
-permitting) from the server. </Para></ListItem>
-<Term><B>tar &lt;c|x&gt;[IXbgNa]</B></Term><ListItem><Para>Performs a tar operation - see
-the <B>-T</B> command line option above. Behavior may be affected by the <B>tarmode</B>
-command (see below). Using g (incremental) and N (newer) will affect tarmode
-settings. Note that using the "-" option with tar x may not work - use the
-command line option instead. </Para></ListItem>
-<Term><B>blocksize &lt;blocksize&gt;</B></Term><ListItem><Para>Blocksize. Must be followed
-by a valid (greater than zero) blocksize. Causes tar file to be written
-out in blocksize*TBLOCK (usually 512 byte) blocks. </Para></ListItem>
-<Term><B>tarmode &lt;full|inc|reset|noreset&gt;</B></Term><ListItem><Para>Changes
-tar's behavior with regard to archive bits. In full mode, tar will back up
-everything regardless of the archive bit setting (this is the default mode).
-In incremental mode, tar will only back up files with the archive bit set.
-In reset mode, tar will reset the archive bit on all files it backs up
-(implies read/write share). </Para></ListItem>
-<Term><B>setmode &lt;filename&gt; &lt;perm=[+|\-]rsha&gt;</B></Term><ListItem><Para>A version of the
-DOS attrib command to set file permissions. For example: </Para></ListItem>
-<Term>CWsetmode myfile
-+r </Term><ListItem><Para></Para></ListItem>
-<Term>would make myfile read only. </Term><ListItem><Para></Para></ListItem>
-</ItemizedList>
-
-
-<Para></RefSect1>
-
-<RefSect1><Title>Notes</Title>
-
-<Para>Some servers are fussy about the case
-of supplied usernames, passwords, share names (AKA service names) and machine
-names. <ItemizedList MARK=Bullet>
-<Term>If you </Term><ListItem><Para>fail to connect try giving all parameters in uppercase. </Para></ListItem>
-</ItemizedList>
-
-
-<Para>It
-is often necessary to use the <B>-n</B> option when connecting to some types of
-servers. For example OS/2 LanManager insists on a valid NetBIOS name being
-used, so you need to supply a valid name that would be known to the server.
-
-
-<Para>smbclient supports long file names where the server supports the LANMAN2
-protocol or above.
-
-<Para></RefSect1>
-
-<RefSect1><Title>Environment Variables</Title>
-
-<Para>The variable <B>USER</B> may contain the
-username of the person using the client. This information is used only
-if the protocol level is high enough to support session-level passwords.
-
-
-<Para>The variable <B>PASSWD</B> may contain the password of the person using the client.
- This information is used only if the protocol level is high enough to
-support session-level passwords.
-
-<Para></RefSect1>
-
-<RefSect1><Title>Installation</Title>
-
-<Para>The location of the client program
-is a matter for individual system administrators. The following are thus
-suggestions only.
-
-<Para>It is recommended that the smbclient software be installed
-in the /usr/local/samba/bin or /usr/samba/bin directory, this directory
-readable by all, writeable only by root. The client program itself should
-be executable by all. The client should <I>NOT</I> be setuid or setgid!
-
-<Para>The client
-log files should be put in a directory readable and writeable only by the
-user.
-
-<Para>To test the client, you will need to know the name of a running SMB/CIFS
-server. It is possible to run <B><Command>smbd (8)</B></Command> an ordinary user - running that server
-as a daemon on a user-accessible port (typically any port number over 1024)
-would provide a suitable test server.
-
-<Para></RefSect1>
-
-<RefSect1><Title>Diagnostics</Title>
-
-<Para>Most diagnostics issued
-by the client are logged in a specified log file. The log file name is specified
-at compile time, but may be overridden on the command line.
-
-<Para>The number and
-nature of diagnostics available depends on the debug level used by the
-client. If you have problems, set the debug level to 3 and peruse the log
-files.
-
-<Para></RefSect1>
-
-<RefSect1><Title>Version</Title>
-
-<Para>This man page is correct for version 2.0 of the Samba suite.
-
-
-<Para></RefSect1>
-
-<RefSect1><Title>Author</Title>
-
-<Para>The original Samba software and related utilities were created by
-Andrew Tridgell <I>samba@samba.org</I>. Samba is now developed by the Samba Team
-as an Open Source project similar to the way the Linux kernel is developed.
-
-
-<Para>The original Samba man pages were written by Karl Auer. The man page sources
-were converted to YODL format (another excellent piece of Open Source software,
-available at <B>ftp://ftp.icce.rug.nl/pub/unix/</B>) and updated for the Samba2.0
-release by Jeremy Allison. <I>samba@samba.org</I>.
-
-<Para>See <B><Command>samba (7)</B></Command> to find out how
-to get a full list of contributors and details on how to submit bug reports,
-comments etc. </RefSect1>
-
-</RefEntry>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+<refentry id="smbclient">
+
+<refmeta>
+ <refentrytitle>smbclient</refentrytitle>
+ <manvolnum>1</manvolnum>
+</refmeta>
+
+
+<refnamediv>
+ <refname>smbclient</refname>
+ <refpurpose>ftp-like client to access SMB/CIFS resources
+ on servers</refpurpose>
+</refnamediv>
+
+<refsynopsisdiv>
+ <cmdsynopsis>
+ <command>smbclient</command>
+ <arg choice="req">servicename</arg>
+ <arg choice="opt">-b &lt;buffer size&gt;</arg>
+ <arg choice="opt">-d debuglevel</arg>
+ <arg choice="opt">-D Directory</arg>
+ <arg choice="opt">-S server</arg>
+ <arg choice="opt">-U username</arg>
+ <arg choice="opt">-W workgroup</arg>
+ <arg choice="opt">-M &lt;netbios name&gt;</arg>
+ <arg choice="opt">-m maxprotocol</arg>
+ <arg choice="opt">-A authfile</arg>
+ <arg choice="opt">-N</arg>
+ <arg choice="opt">-l logfile</arg>
+ <arg choice="opt">-L &lt;netbios name&gt;</arg>
+ <arg choice="opt">-I destinationIP</arg>
+ <arg choice="opt">-E &lt;terminal code&gt;</arg>
+ <arg choice="opt">-c &lt;command string&gt;</arg>
+ <arg choice="opt">-i scope</arg>
+ <arg choice="opt">-O &lt;socket options&gt;</arg>
+ <arg choice="opt">-p port</arg>
+ <arg choice="opt">-R &lt;name resolve order&gt;</arg>
+ <arg choice="opt">-s &lt;smb config file&gt;</arg>
+ <arg choice="opt">-T&lt;c|x&gt;IXFqgbNan</arg>
+ <arg choice="opt">password</arg>
+ </cmdsynopsis>
+</refsynopsisdiv>
+
+<refsect1>
+ <title>DESCRIPTION</title>
+
+ <para>This tool is part of the <ulink url="samba.7.html">
+ Samba</ulink> suite.</para>
+
+ <para><command>smbclient</command> is a client that can
+ 'talk' to an SMB/CIFS server. It offers an interface
+ similar to that of the ftp program (see <command>ftp(1)</command>).
+ Operations include things like getting files from the server
+ to the local machine, putting files from the local machine to
+ the server, retrieving directory information from the server
+ and so on. </para>
+</refsect1>
+
+
+<refsect1>
+ <title>OPTIONS</title>
+
+ <variablelist>
+ <varlistentry>
+ <term>servicename</term>
+ <listitem><para>servicename is the name of the service
+ you want to use on the server. A service name takes the form
+ <filename>//server/service</filename> where <parameter>server
+ </parameter> is the NetBIOS name of the SMB/CIFS server
+ offering the desired service and <parameter>service</parameter>
+ is the name of the service offered. Thus to connect to
+ the service "printer" on the SMB/CIFS server "smbserver",
+ you would use the servicename <filename>//smbserver/printer
+ </filename></para>
+
+ <para>Note that the server name required is NOT necessarily
+ the IP (DNS) host name of the server ! The name required is
+ a NetBIOS server name, which may or may not be the
+ same as the IP hostname of the machine running the server.
+ </para>
+
+ <para>The server name is looked up according to either
+ the <parameter>-R</parameter> parameter to smbclient or
+ using the name resolve order parameter in the smb.conf file,
+ allowing an administrator to change the order and methods
+ by which server names are looked up. </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>password</term>
+ <listitem><para>The password required to access the specified
+ service on the specified server. If this parameter is
+ supplied, the <parameter>-N</parameter> option (suppress
+ password prompt) is assumed. </para>
+
+ <para>There is no default password. If no password is supplied
+ on the command line (either by using this parameter or adding
+ a password to the <parameter>-U</parameter> option (see
+ below)) and the <parameter>-N</parameter> option is not
+ specified, the client will prompt for a password, even if
+ the desired service does not require one. (If no password is
+ required, simply press ENTER to provide a null password.)
+ </para>
+
+ <para>Note: Some servers (including OS/2 and Windows for
+ Workgroups) insist on an uppercase password. Lowercase
+ or mixed case passwords may be rejected by these servers.
+ </para>
+
+ <para>Be cautious about including passwords in scripts.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-s smb.conf</term>
+ <listitem><para>Specifies the location of the all important
+ <filename>smb.conf</filename> file. </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-O socket options</term>
+ <listitem><para>TCP socket options to set on the client
+ socket. See the socket options parameter in the <filename>
+ smb.conf (5)</filename> manpage for the list of valid
+ options. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>name resolve order (G)</term>
+ <listitem><para>This option is used by the programs in the Samba
+ suite to determine what naming services and in what order to resolve
+ host names to IP addresses. The option takes a space separated
+ string of different name resolution options.</para>
+
+ <para>The options are :"lmhosts", "host", "wins" and "bcast". They
+ cause names to be resolved as follows :</para>
+
+ <itemizedlist>
+ <listitem><para><constant>lmhosts</constant> : Lookup an IP
+ address in the Samba lmhosts file. If the line in lmhosts has
+ no name type attached to the NetBIOS name (see the <ulink
+ url="lmhosts.5.html">lmhosts(5)</ulink> for details) then
+ any name type matches for lookup.</para></listitem>
+
+ <listitem><para><constant>host</constant> : Do a standard host
+ name to IP address resolution, using the system <filename>/etc/hosts
+ </filename>, NIS, or DNS lookups. This method of name resolution
+ is operating system depended for instance on IRIX or Solaris this
+ may be controlled by the <filename>/etc/nsswitch.conf</filename>
+ file). Note that this method is only used if the NetBIOS name
+ type being queried is the 0x20 (server) name type, otherwise
+ it is ignored.</para></listitem>
+
+ <listitem><para><constant>wins</constant> : Query a name with
+ the IP address listed in the <parameter>wins server</parameter>
+ parameter. If no WINS server has
+ been specified this method will be ignored.</para></listitem>
+
+ <listitem><para><constant>bcast</constant> : Do a broadcast on
+ each of the known local interfaces listed in the
+ <parameter>interfaces</parameter>
+ parameter. This is the least reliable of the name resolution
+ methods as it depends on the target host being on a locally
+ connected subnet.</para></listitem>
+ </itemizedlist>
+
+ <para>If this parameter is not set then the name resolve order
+ defined in the <filename>smb.conf</filename> file parameter
+ (name resolve order) will be used. </para>
+
+ <para>The default order is lmhosts, host, wins, bcast and without
+ this parameter or any entry in the <parameter>name resolve order
+ </parameter> parameter of the smb.conf file the name resolution
+ methods will be attempted in this order. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-M NetBIOS name</term>
+ <listitem><para>This options allows you to send messages, using
+ the "WinPopup" protocol, to another computer. Once a connection is
+ established you then type your message, pressing ^D (control-D) to
+ end. </para>
+
+ <para>If the receiving computer is running WinPopup the user will
+ receive the message and probably a beep. If they are not running
+ WinPopup the message will be lost, and no error message will
+ occur. </para>
+
+ <para>The message is also automatically truncated if the message
+ is over 1600 bytes, as this is the limit of the protocol.
+ </para>
+
+ <para>One useful trick is to cat the message through
+ <command>smbclient</command>. For example: <command>
+ cat mymessage.txt | smbclient -M FRED </command> will
+ send the message in the file <filename>mymessage.txt</filename>
+ to the machine FRED. </para>
+
+ <para>You may also find the <parameter>-U</parameter> and
+ <parameter>-I</parameter> options useful, as they allow you to
+ control the FROM and TO parts of the message. </para>
+
+ <para>See the message command parameter in the <filename>
+ smb.conf(5)</filename> for a description of how to handle incoming
+ WinPopup messages in Samba. </para>
+
+ <para><emphasis>Note</emphasis>: Copy WinPopup into the startup group
+ on your WfWg PCs if you want them to always be able to receive
+ messages. </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>-i scope</term>
+ <listitem><para>This specifies a NetBIOS scope that smbclient will
+ use to communicate with when generating NetBIOS names. For details
+ on the use of NetBIOS scopes, see rfc1001.txt and rfc1002.txt.
+ NetBIOS scopes are <emphasis>very</emphasis> rarely used, only set
+ this parameter if you are the system administrator in charge of all
+ the NetBIOS systems you communicate with. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-N</term>
+ <listitem><para>If specified, this parameter suppresses the normal
+ password prompt from the client to the user. This is useful when
+ accessing a service that does not require a password. </para>
+
+ <para>Unless a password is specified on the command line or
+ this parameter is specified, the client will request a
+ password.</para></listitem>
+ </varlistentry>
+
+
+
+ <varlistentry>
+ <term>-n NetBIOS name</term>
+ <listitem><para>By default, the client will use the local
+ machine's hostname (in uppercase) as its NetBIOS name. This parameter
+ allows you to override the host name and use whatever NetBIOS
+ name you wish. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-d debuglevel</term>
+ <listitem><para>debuglevel is an integer from 0 to 10, or
+ the letter 'A'. </para>
+
+ <para>The default value if this parameter is not specified
+ is zero. </para>
+
+ <para>The higher this value, the more detail will be logged to
+ the log files about the activities of the
+ client. At level 0, only critical errors and serious warnings will
+ be logged. Level 1 is a reasonable level for day to day running -
+ it generates a small amount of information about operations
+ carried out. </para>
+
+ <para>Levels above 1 will generate considerable amounts of log
+ data, and should only be used when investigating a problem.
+ Levels above 3 are designed for use only by developers and
+ generate HUGE amounts of log data, most of which is extremely
+ cryptic. If debuglevel is set to the letter 'A', then <emphasis>all
+ </emphasis> debug messages will be printed. This setting
+ is for developers only (and people who <emphasis>really</emphasis> want
+ to know how the code works internally). </para>
+
+ <para>Note that specifying this parameter here will override
+ the log level parameter in the <command>smb.conf (5)</command>
+ file. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-p port</term>
+ <listitem><para>This number is the TCP port number that will be used
+ when making connections to the server. The standard (well-known)
+ TCP port number for an SMB/CIFS server is 139, which is the
+ default. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-l logfilename</term>
+ <listitem><para>If specified, logfilename specifies a base filename
+ into which operational data from the running client will be
+ logged. </para>
+
+ <para>The default base name is specified at compile time.</para>
+
+ <para>The base name is used to generate actual log file names.
+ For example, if the name specified was "log", the debug file
+ would be <filename>log.client</filename>.</para>
+
+ <para>The log file generated is never removed by the client.
+ </para></listitem>
+ </varlistentry>
+
+
+
+ <varlistentry>
+ <term>-h</term><listitem>
+ <para>Print the usage message for the client. </para></listitem>
+ </varlistentry>
+
+
+
+ <varlistentry>
+ <term>-I IP-address</term>
+ <listitem><para>IP address is the address of the server to connect to.
+ It should be specified in standard "a.b.c.d" notation. </para>
+
+ <para>Normally the client would attempt to locate a named
+ SMB/CIFS server by looking it up via the NetBIOS name resolution
+ mechanism described above in the <parameter>name resolve order</parameter>
+ parameter above. Using this parameter will force the client
+ to assume that the server is on the machine with the specified IP
+ address and the NetBIOS name component of the resource being
+ connected to will be ignored. </para>
+
+ <para>There is no default for this parameter. If not supplied,
+ it will be determined automatically by the client as described
+ above. </para></listitem>
+ </varlistentry>
+
+
+
+ <varlistentry>
+ <term>-E</term>
+ <listitem><para>This parameter causes the client to write messages
+ to the standard error stream (stderr) rather than to the standard
+ output stream. </para>
+
+ <para>By default, the client writes messages to standard output
+ - typically the user's tty. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-U username[%pass]</term>
+ <listitem><para>Sets the SMB username or username and password.
+ If %pass is not specified, The user will be prompted. The client
+ will first check the USER environment variable, then the
+ <parameter>$LOGNAME</parameter> variable and if either exist, the
+ string is uppercased. Anything in these variables following a '%'
+ sign will be treated as the password. If these environmental
+ variables are not found, the username <constant>GUEST</constant>
+ is used. </para>
+
+ <para>If the password is not included in these environment
+ variables (using the %pass syntax), rpcclient will look for
+ a <parameter>$PASSWD</parameter> environment variable from which
+ to read the password. </para>
+
+ <para>A third option is to use a credentials file which
+ contains the plaintext of the username and password. This
+ option is mainly provided for scripts where the admin doesn't
+ desire to pass the credentials on the command line or via environment
+ variables. If this method is used, make certain that the permissions
+ on the file restrict access from unwanted users. See the
+ <parameter>-A</parameter> for more details. </para>
+
+ <para>Be cautious about including passwords in scripts or in
+ the <parameter>$PASSWD</parameter> environment variable. Also, on
+ many systems the command line of a running process may be seen
+ via the <command>ps</command> command to be safe always allow
+ <command>rpcclient</command> to prompt for a password and type
+ it in directly. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-A filename</term><listitem><para>This option allows
+ you to specify a file from which to read the username and
+ password used in the connection. The format of the file is
+ </para>
+
+ <para><programlisting>
+username = &lt;value&gt;
+password = &lt;value&gt;
+ </programlisting></para>
+
+
+ <para>Make certain that the permissions on the file restrict
+ access from unwanted users. </para></listitem>
+ </varlistentry>
+
+
+
+ <varlistentry>
+ <term>-L</term>
+ <listitem><para>This option allows you to look at what services
+ are available on a server. You use it as <command>smbclient -L
+ host</command> and a list should appear. The <parameter>-I
+ </parameter> option may be useful if your NetBIOS names don't
+ match your tcp/ip dns host names or if you are trying to reach a
+ host on another network. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-t terminal code</term>
+ <listitem><para>This option tells smbclient how to interpret
+ filenames coming from the remote server. Usually Asian language
+ multibyte UNIX implementations use different character sets than
+ SMB/CIFS servers (<emphasis>EUC</emphasis> instead of <emphasis>
+ SJIS</emphasis> for example). Setting this parameter will let
+ <command>smbclient</command> convert between the UNIX filenames and
+ the SMB filenames correctly. This option has not been seriously tested
+ and may have some problems. </para>
+
+ <para>The terminal codes include CWsjis, CWeuc, CWjis7, CWjis8,
+ CWjunet, CWhex, CWcap. This is not a complete list, check the Samba
+ source code for the complete list. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-b buffersize</term>
+ <listitem><para>This option changes the transmit/send buffer
+ size when getting or putting a file from/to the server. The default
+ is 65520 bytes. Setting this value smaller (to 1200 bytes) has been
+ observed to speed up file transfers to and from a Win9x server.
+ </para></listitem>
+ </varlistentry>
+
+
+
+ <varlistentry>
+ <term>-W WORKGROUP</term>
+ <listitem><para>Override the default workgroup specified in the
+ workgroup parameter of the <filename>smb.conf</filename> file
+ for this connection. This may be needed to connect to some
+ servers. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-T tar options</term>
+ <listitem><para>smbclient may be used to create <command>tar(1)
+ </command> compatible backups of all the files on an SMB/CIFS
+ share. The secondary tar flags that can be given to this option
+ are : </para>
+
+ <itemizedlist>
+ <listitem><para><parameter>c</parameter> - Create a tar file on UNIX.
+ Must be followed by the name of a tar file, tape device
+ or "-" for standard output. If using standard output you must
+ turn the log level to its lowest value -d0 to avoid corrupting
+ your tar file. This flag is mutually exclusive with the
+ <parameter>x</parameter> flag. </para></listitem>
+
+ <listitem><para><parameter>x</parameter> - Extract (restore) a local
+ tar file back to a share. Unless the -D option is given, the tar
+ files will be restored from the top level of the share. Must be
+ followed by the name of the tar file, device or "-" for standard
+ input. Mutually exclusive with the <parameter>c</parameter> flag.
+ Restored files have their creation times (mtime) set to the
+ date saved in the tar file. Directories currently do not get
+ their creation dates restored properly. </para></listitem>
+
+ <listitem><para><parameter>I</parameter> - Include files and directories.
+ Is the default behavior when filenames are specified above. Causes
+ tar files to be included in an extract or create (and therefore
+ everything else to be excluded). See example below. Filename globbing
+ works in one of two ways. See r below. </para></listitem>
+
+ <listitem><para><parameter>X</parameter> - Exclude files and directories.
+ Causes tar files to be excluded from an extract or create. See
+ example below. Filename globbing works in one of two ways now.
+ See <parameter>r</parameter> below. </para></listitem>
+
+ <listitem><para><parameter>b</parameter> - Blocksize. Must be followed
+ by a valid (greater than zero) blocksize. Causes tar file to be
+ written out in blocksize*TBLOCK (usually 512 byte) blocks.
+ </para></listitem>
+
+ <listitem><para><parameter>g</parameter> - Incremental. Only back up
+ files that have the archive bit set. Useful only with the
+ <parameter>c</parameter> flag. </para></listitem>
+
+ <listitem><para><parameter>q</parameter> - Quiet. Keeps tar from printing
+ diagnostics as it works. This is the same as tarmode quiet.
+ </para></listitem>
+
+ <listitem><para><parameter>r</parameter> - Regular expression include
+ or exclude. Uses regular regular expression matching for
+ excluding or excluding files if compiled with HAVE_REGEX_H.
+ However this mode can be very slow. If not compiled with
+ HAVE_REGEX_H, does a limited wildcard match on '*' and '?'.
+ </para></listitem>
+
+ <listitem><para><parameter>N</parameter> - Newer than. Must be followed
+ by the name of a file whose date is compared against files found
+ on the share during a create. Only files newer than the file
+ specified are backed up to the tar file. Useful only with the
+ <parameter>c</parameter> flag. </para></listitem>
+
+ <listitem><para><parameter>a</parameter> - Set archive bit. Causes the
+ archive bit to be reset when a file is backed up. Useful with the
+ <parameter>g</parameter> and <parameter>c</parameter> flags.
+ </para></listitem>
+ </itemizedlist>
+
+ <para><emphasis>Tar Long File Names</emphasis></para>
+
+ <para><command>smbclient</command>'s tar option now supports long
+ file names both on backup and restore. However, the full path
+ name of the file must be less than 1024 bytes. Also, when
+ a tar archive is created, smbclient's tar option places all
+ files in the archive with relative names, not absolute names.
+ </para>
+
+ <para><emphasis>Tar Filenames</emphasis></para>
+
+ <para>All file names can be given as DOS path names (with '\'
+ as the component separator) or as UNIX path names (with '/' as
+ the component separator). </para>
+
+ <para><emphasis>Examples</emphasis></para>
+
+ <para>Restore from tar file backup.tar into myshare on mypc
+ (no password on share). </para>
+
+ <para><command>smbclient //mypc/myshare "" -N -Tx backup.tar
+ </command></para>
+
+ <para>Restore everything except <filename>users/docs</filename>
+ </para>
+
+ <para><command>smbclient //mypc/myshare "" -N -TXx backup.tar
+ users/docs</command></para>
+
+ <para>Create a tar file of the files beneath <filename>
+ users/docs</filename>. </para>
+
+ <para><command>smbclient //mypc/myshare "" -N -Tc
+ backup.tar users/docs </command></para>
+
+ <para>Create the same tar file as above, but now use
+ a DOS path name. </para>
+
+ <para><command>smbclient //mypc/myshare "" -N -tc backup.tar
+ users\edocs </command></para>
+
+ <para>Create a tar file of all the files and directories in
+ the share. </para>
+
+ <para><command>smbclient //mypc/myshare "" -N -Tc backup.tar *
+ </command></para>
+ </listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>-D initial directory</term>
+ <listitem><para>Change to initial directory before starting. Probably
+ only of any use with the tar -T option. </para></listitem>
+ </varlistentry>
+
+
+
+ <varlistentry>
+ <term>-c command string</term>
+ <listitem><para>command string is a semicolon separated list of
+ commands to be executed instead of prompting from stdin. <parameter>
+ -N</parameter> is implied by <parameter>-c</parameter>.</para>
+
+ <para>This is particularly useful in scripts and for printing stdin
+ to the server, e.g. <command>-c 'print -'</command>. </para></listitem>
+ </varlistentry>
+ </variablelist>
+</refsect1>
+
+
+<refsect1>
+ <title>OPERATIONS</title>
+
+ <para>Once the client is running, the user is presented with
+ a prompt : </para>
+
+ <para><prompt>smb:\&gt; </prompt></para>
+
+ <para>The backslash ("\") indicates the current working directory
+ on the server, and will change if the current working directory
+ is changed. </para>
+
+ <para>The prompt indicates that the client is ready and waiting to
+ carry out a user command. Each command is a single word, optionally
+ followed by parameters specific to that command. Command and parameters
+ are space-delimited unless these notes specifically
+ state otherwise. All commands are case-insensitive. Parameters to
+ commands may or may not be case sensitive, depending on the command.
+ </para>
+
+ <para>You can specify file names which have spaces in them by quoting
+ the name with double quotes, for example "a long file name". </para>
+
+ <para>Parameters shown in square brackets (e.g., "[parameter]") are
+ optional. If not given, the command will use suitable defaults. Parameters
+ shown in angle brackets (e.g., "&lt;parameter&gt;") are required.
+ </para>
+
+
+ <para>Note that all commands operating on the server are actually
+ performed by issuing a request to the server. Thus the behavior may
+ vary from server to server, depending on how the server was implemented.
+ </para>
+
+ <para>The commands available are given here in alphabetical order. </para>
+
+ <variablelist>
+ <varlistentry>
+ <term>? [command]</term>
+ <listitem><para>If "command" is specified, the ? command will display
+ a brief informative message about the specified command. If no
+ command is specified, a list of available commands will
+ be displayed. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>! [shell command]</term>
+ <listitem><para>If "shell command" is specified, the !
+ command will execute a shell locally and run the specified shell
+ command. If no command is specified, a local shell will be run.
+ </para></listitem>
+ </varlistentry>
+
+
+
+ <varlistentry>
+ <term>cd [directory name]</term>
+ <listitem><para>If "directory name" is specified, the current
+ working directory on the server will be changed to the directory
+ specified. This operation will fail if for any reason the specified
+ directory is inaccessible. </para>
+
+ <para>If no directory name is specified, the current working
+ directory on the server will be reported. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>del &lt;mask&gt;</term>
+ <listitem><para>The client will request that the server attempt
+ to delete all files matching "mask" from the current working
+ directory on the server. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>dir &lt;mask&gt;</term>
+ <listitem><para>A list of the files matching "mask" in the current
+ working directory on the server will be retrieved from the server
+ and displayed. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>exit</term>
+ <listitem><para>Terminate the connection with the server and exit
+ from the program. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>get &lt;remote file name&gt; [local file name]</term>
+ <listitem><para>Copy the file called "remote file name" from
+ the server to the machine running the client. If specified, name
+ the local copy "local file name". Note that all transfers in
+ <command>smbclient</command> are binary. See also the
+ lowercase command. </para></listitem>
+ </varlistentry>
+
+
+
+ <varlistentry>
+ <term>help [command]</term>
+ <listitem><para>See the ? command above. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>lcd [directory name]</term>
+ <listitem><para>If "directory name" is specified, the current
+ working directory on the local machine will be changed to
+ the directory specified. This operation will fail if for any
+ reason the specified directory is inaccessible. </para>
+
+ <para>If no directory name is specified, the name of the
+ current working directory on the local machine will be reported.
+ </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>lowercase</term>
+ <listitem><para>Toggle lowercasing of filenames for the get and
+ mget commands. </para>
+
+ <para>When lowercasing is toggled ON, local filenames are converted
+ to lowercase when using the get and mget commands. This is
+ often useful when copying (say) MSDOS files from a server, because
+ lowercase filenames are the norm on UNIX systems. </para></listitem>
+ </varlistentry>
+
+
+
+ <varlistentry>
+ <term>ls &lt;mask&gt;</term>
+ <listitem><para>See the dir command above. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>mask &lt;mask&gt;</term>
+ <listitem><para>This command allows the user to set up a mask
+ which will be used during recursive operation of the mget and
+ mput commands. </para>
+
+ <para>The masks specified to the mget and mput commands act as
+ filters for directories rather than files when recursion is
+ toggled ON. </para>
+
+ <para>The mask specified with the mask command is necessary
+ to filter files within those directories. For example, if the
+ mask specified in an mget command is "source*" and the mask
+ specified with the mask command is "*.c" and recursion is
+ toggled ON, the mget command will retrieve all files matching
+ "*.c" in all directories below and including all directories
+ matching "source*" in the current working directory. </para>
+
+ <para>Note that the value for mask defaults to blank (equivalent
+ to "*") and remains so until the mask command is used to change it.
+ It retains the most recently specified value indefinitely. To
+ avoid unexpected results it would be wise to change the value of
+ mask back to "*" after using the mget or mput commands. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>md &lt;directory name&gt;</term>
+ <listitem><para>See the mkdir command. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>mget &lt;mask&gt;</term>
+ <listitem><para>Copy all files matching mask from the server to
+ the machine running the client. </para>
+
+ <para>Note that mask is interpreted differently during recursive
+ operation and non-recursive operation - refer to the recurse and
+ mask commands for more information. Note that all transfers in
+ smbclient are binary. See also the lowercase command. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>mkdir &lt;directory name&gt;</term>
+ <listitem><para>Create a new directory on the server (user access
+ privileges permitting) with the specified name. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>mput &lt;mask&gt;</term>
+ <listitem><para>Copy all files matching mask in the current working
+ directory on the local machine to the current working directory on
+ the server. </para>
+
+ <para>Note that mask is interpreted differently during recursive
+ operation and non-recursive operation - refer to the recurse and mask
+ commands for more information. Note that all transfers in smbclient
+ are binary. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>print &lt;file name&gt;</term>
+ <listitem><para>Print the specified file from the local machine
+ through a printable service on the server. </para>
+
+ <para>See also the printmode command.</para></listitem>
+ </varlistentry>
+
+
+
+ <varlistentry>
+ <term>printmode &lt;graphics or text&gt;</term>
+ <listitem><para>Set the print mode to suit either binary data
+ (such as graphical information) or text. Subsequent print
+ commands will use the currently set print mode. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>prompt</term>
+ <listitem><para>Toggle prompting for filenames during operation
+ of the mget and mput commands. </para>
+
+ <para>When toggled ON, the user will be prompted to confirm
+ the transfer of each file during these commands. When toggled
+ OFF, all specified files will be transferred without prompting.
+ </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>put &lt;local file name&gt; [remote file name]</term>
+ <listitem><para>Copy the file called "local file name" from the
+ machine running the client to the server. If specified,
+ name the remote copy "remote file name". Note that all transfers
+ in smbclient are binary. See also the lowercase command.
+ </para></listitem>
+ </varlistentry>
+
+
+
+ <varlistentry>
+ <term>queue</term>
+ <listitem><para>Displays the print queue, showing the job id,
+ name, size and current status. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>quit</term>
+ <listitem><para>See the exit command. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>rd &lt;directory name&gt;</term>
+ <listitem><para>See the rmdir command. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>recurse</term>
+ <listitem><para>Toggle directory recursion for the commands mget
+ and mput. </para>
+
+ <para>When toggled ON, these commands will process all directories
+ in the source directory (i.e., the directory they are copying
+ from ) and will recurse into any that match the mask specified
+ to the command. Only files that match the mask specified using
+ the mask command will be retrieved. See also the mask command.
+ </para>
+
+ <para>When recursion is toggled OFF, only files from the current
+ working directory on the source machine that match the mask specified
+ to the mget or mput commands will be copied, and any mask specified
+ using the mask command will be ignored. </para></listitem>
+ </varlistentry>
+
+
+
+ <varlistentry>
+ <term>rm &lt;mask&gt;</term>
+ <listitem><para>Remove all files matching mask from the current
+ working directory on the server. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>rmdir &lt;directory name&gt;</term>
+ <listitem><para>Remove the specified directory (user access
+ privileges permitting) from the server. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>tar &lt;c|x&gt;[IXbgNa]</term>
+ <listitem><para>Performs a tar operation - see the <parameter>-T
+ </parameter> command line option above. Behavior may be affected
+ by the tarmode command (see below). Using g (incremental) and N
+ (newer) will affect tarmode settings. Note that using the "-" option
+ with tar x may not work - use the command line option instead.
+ </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>blocksize &lt;blocksize&gt;</term>
+ <listitem><para>Blocksize. Must be followed by a valid (greater
+ than zero) blocksize. Causes tar file to be written out in
+ blocksize*TBLOCK (usually 512 byte) blocks. </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>tarmode &lt;full|inc|reset|noreset&gt;</term>
+ <listitem><para>Changes tar's behavior with regard to archive
+ bits. In full mode, tar will back up everything regardless of the
+ archive bit setting (this is the default mode). In incremental mode,
+ tar will only back up files with the archive bit set. In reset mode,
+ tar will reset the archive bit on all files it backs up (implies
+ read/write share). </para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>setmode &lt;filename&gt; &lt;perm=[+|\-]rsha&gt;</term>
+ <listitem><para>A version of the DOS attrib command to set
+ file permissions. For example: </para>
+
+ <para><command>setmode myfile +r </command></para>
+
+ <para>would make myfile read only. </para></listitem>
+ </varlistentry>
+
+ </variablelist>
+</refsect1>
+
+<refsect1>
+ <title>NOTES</title>
+
+ <para>Some servers are fussy about the case of supplied usernames,
+ passwords, share names (AKA service names) and machine names.
+ If you fail to connect try giving all parameters in uppercase.
+ </para>
+
+ <para>It is often necessary to use the -n option when connecting
+ to some types of servers. For example OS/2 LanManager insists
+ on a valid NetBIOS name being used, so you need to supply a valid
+ name that would be known to the server.</para>
+
+ <para>smbclient supports long file names where the server
+ supports the LANMAN2 protocol or above. </para>
+</refsect1>
+
+<refsect1>
+ <title>ENVIRONMENT VARIABLES</title>
+
+ <para>The variable <parameter>$USER</parameter> may contain the
+ username of the person using the client. This information is
+ used only if the protocol level is high enough to support
+ session-level passwords.</para>
+
+
+ <para>The variable <parameter>$PASSWD</parameter> may contain
+ the password of the person using the client. This information is
+ used only if the protocol level is high enough to support
+ session-level passwords. </para>
+</refsect1>
+
+
+<refsect1>
+ <title>INSTALLATION</title>
+
+ <para>The location of the client program is a matter for
+ individual system administrators. The following are thus
+ suggestions only. </para>
+
+ <para>It is recommended that the smbclient software be installed
+ in the <filename>/usr/local/samba/bin/</filename> or <filename>
+ /usr/samba/bin/</filename> directory, this directory readable
+ by all, writeable only by root. The client program itself should
+ be executable by all. The client should <emphasis>NOT</emphasis> be
+ setuid or setgid! </para>
+
+ <para>The client log files should be put in a directory readable
+ and writeable only by the user. </para>
+
+ <para>To test the client, you will need to know the name of a
+ running SMB/CIFS server. It is possible to run <command>smbd(8)
+ </command> an ordinary user - running that server as a daemon
+ on a user-accessible port (typically any port number over 1024)
+ would provide a suitable test server. </para>
+</refsect1>
+
+
+<refsect1>
+ <title>DIAGNOSTICS</title>
+
+ <para>Most diagnostics issued by the client are logged in a
+ specified log file. The log file name is specified at compile time,
+ but may be overridden on the command line. </para>
+
+ <para>The number and nature of diagnostics available depends
+ on the debug level used by the client. If you have problems,
+ set the debug level to 3 and peruse the log files. </para>
+</refsect1>
+
+
+<refsect1>
+ <title>VERSION</title>
+
+ <para>This man page is correct for version 2.2 of
+ the Samba suite.</para>
+</refsect1>
+
+
+<refsect1>
+ <title>AUTHOR</title>
+
+ <para>The original Samba software and related utilities
+ were created by Andrew Tridgell. Samba is now developed
+ by the Samba Team as an Open Source project similar
+ to the way the Linux kernel is developed.</para>
+
+ <para>The original Samba man pages were written by Karl Auer.
+ The man page sources were converted to YODL format (another
+ excellent piece of Open Source software, available at
+ <ulink url="ftp://ftp.icce.rug.nl/pub/unix/">
+ ftp://ftp.icce.rug.nl/pub/unix/</ulink>) and updated for the Samba 2.0
+ release by Jeremy Allison. The conversion to DocBook for
+ Samba 2.2 was done by Gerald Carter</para>
+</refsect1>
+
+</refentry>