diff options
Diffstat (limited to 'packaging/Caldera')
| -rwxr-xr-x | packaging/Caldera/OpenLinux/convertsmbpasswd.perl | 15 | ||||
| -rwxr-xr-x | packaging/Caldera/OpenLinux/findsmb | 141 | ||||
| -rwxr-xr-x | packaging/Caldera/OpenLinux/make_smbpasswd.perl | 13 | ||||
| -rw-r--r-- | packaging/Caldera/OpenLinux/samba.daemon | 6 | ||||
| -rwxr-xr-x | packaging/Caldera/OpenLinux/samba.init | 62 | ||||
| -rw-r--r-- | packaging/Caldera/OpenLinux/samba.logrotate | 12 | ||||
| -rw-r--r-- | packaging/Caldera/OpenLinux/samba.pam | 7 | ||||
| -rw-r--r-- | packaging/Caldera/OpenLinux/smb.conf.sample | 312 | ||||
| -rwxr-xr-x | packaging/Caldera/OpenLinux/smbadduser.perl | 146 | ||||
| -rwxr-xr-x | packaging/Caldera/OpenLinux/smbprint | 77 | ||||
| -rw-r--r-- | packaging/Caldera/OpenLinux/smbusers | 3 | ||||
| -rwxr-xr-x | packaging/Caldera/OpenLinux/updatesmbpasswd.perl | 10 |
12 files changed, 804 insertions, 0 deletions
diff --git a/packaging/Caldera/OpenLinux/convertsmbpasswd.perl b/packaging/Caldera/OpenLinux/convertsmbpasswd.perl new file mode 100755 index 0000000000..6b83886cd4 --- /dev/null +++ b/packaging/Caldera/OpenLinux/convertsmbpasswd.perl @@ -0,0 +1,15 @@ +#!/usr/bin/perl -w +# +# Convert a Samba 1.9.18 smbpasswd file format into +# a Samba 2.0 smbpasswd file format. +# Read from stdin and write to stdout for simplicity. +# Set the last change time to the time of conversion. +while ( <> ) { + @V = split(/:/); + if ( ! /^\#/ ) { + $V[6] = $V[4] . "\n"; + $V[5] = sprintf( "LCT-%X", time()); + $V[4] = "[U ]"; + } + print( join( ':', @V)); +} diff --git a/packaging/Caldera/OpenLinux/findsmb b/packaging/Caldera/OpenLinux/findsmb new file mode 100755 index 0000000000..986c248177 --- /dev/null +++ b/packaging/Caldera/OpenLinux/findsmb @@ -0,0 +1,141 @@ +#!/usr/bin/perl +# +# Prints info on all smb responding machines on a subnet. +# This script needs to be run on a machine without nmbd running and be +# run as root to get correct info from WIN95 clients. +# +# syntax: +# findsmb [subnet broadcast address] +# +# with no agrument it will list machines on the current subnet +# +# There will be a "+" in front of the workgroup name for machines that are +# local master browsers for that workgroup. There will be an "*" in front +# of the workgroup name for machines that are the domain master browser for +# that workgroup. +# + +$SAMBABIN = "/usr/bin"; + +for ($i = 0; $i < 2; $i++) { # test for -d option and broadcast address + $_ = shift; + if (m/-d|-D/) { + $DEBUG = 1; + } else { + if ($_) { + $BCAST = "-B $_"; + } + } +} + +sub ipsort # do numeric sort on last field of IP address +{ + @t1 = split(/\./,$a); + @t2 = split(/\./,$b); + @t1[3] <=> @t2[3]; +} + +# look for all machines that respond to a name lookup + +open(NMBLOOKUP,"$SAMBABIN/nmblookup $BCAST '*'|") || + die("Can't run nmblookup '*'.\n"); + +# get rid of all lines that are not a response IP address, +# strip everything but IP address and sort by last field in address + +@ipaddrs = sort ipsort grep(s/ \*<00>.*$//,<NMBLOOKUP>); + +# print header info + +print "\nIP ADDR NETBIOS NAME WORKGROUP/OS/VERSION $BCAST\n"; +print "---------------------------------------------------------------------\n"; + +foreach $ip (@ipaddrs) # loop through each IP address found +{ + $ip =~ s/\n//; # strip newline from IP address + +# find the netbios names registered by each machine + + open(NMBLOOKUP,"$SAMBABIN/nmblookup -r -A $ip|") || + die("Can't get nmb name list.\n"); + @nmblookup = <NMBLOOKUP>; + close NMBLOOKUP; + +# get the first <00> name + + @name = grep(/<00>/,@nmblookup); + $_ = @name[0]; + if ($_) { # we have a netbios name + if (/GROUP/) { # is it a group name + ($name, $aliases, $type, $length, @addresses) = + gethostbyaddr(pack('C4',split('\.',$ip)),2); + if (! $name) { # could not get name + $name = "unknown nis name"; + } + } else { + /(\S+)/; + $name = $1; + } + +# do an smbclient command on the netbios name. + + open(SMB,"$SAMBABIN/smbclient -N -L $name -I $ip -U% |") || + die("Can't do smbclient command.\n"); + @smb = <SMB>; + close SMB; + + if ($DEBUG) { # if -d flag print results of nmblookup and smbclient + print "===============================================================\n"; + print @nmblookup; + print @smb; + } + +# look for the OS= string + + @info = grep(/OS=/,@smb); + $_ = @info[0]; + if ($_) { # we found response + s/Domain=|OS=|Server=|\n//g; # strip out descriptions to make line shorter + + } else { # no OS= string in response (WIN95 client) + +# for WIN95 clients get workgroup name from nmblookup response + @name = grep(/<00> - <GROUP>/,@nmblookup); + $_ = @name[0]; + if ($_) { + /(\S+)/; + $_ = "[$1]"; + } else { + $_ = "Unknown Workgroup"; + } + } + +# see if machine registered a local master browser name + if (grep(/<1d>/,@nmblookup)) { + $master = '+'; # indicate local master browser + if (grep(/<1b>/,@nmblookup)) { # how about domain master browser? + $master = '*'; # indicate domain master browser + } + } else { + $master = ' '; # not a browse master + } + +# line up info in 3 columns + + print "$ip".' 'x(16-length($ip))."$name".' 'x(14-length($name))."$master"."$_\n"; + + } else { # no netbios name found +# try getting the host name + ($name, $aliases, $type, $length, @addresses) = + gethostbyaddr(pack('C4',split('\.',$ip)),2); + if (! $name) { # could not get name + $name = "unknown nis name"; + } + if ($DEBUG) { # if -d flag print results of nmblookup + print "===============================================================\n"; + print @nmblookup; + } + print "$ip".' 'x(16-length($ip))."$name\n"; + } +} + diff --git a/packaging/Caldera/OpenLinux/make_smbpasswd.perl b/packaging/Caldera/OpenLinux/make_smbpasswd.perl new file mode 100755 index 0000000000..2666c19666 --- /dev/null +++ b/packaging/Caldera/OpenLinux/make_smbpasswd.perl @@ -0,0 +1,13 @@ +#!/usr/bin/perl +$X= "X" x 32; +$U="[U ]"; +$L="LCT-00000000"; +print("#\n# SMB password file.\n#\n"); + +while ( <> ) { + next unless (/^[A-Za-z0-9_]/); + chop; + @V = split(/:/); + printf( "%s:%s:%s:%s:%s:%s:%s\n", $V[0], $V[2], $X, $X, $U, $L, $V[4]); +} + diff --git a/packaging/Caldera/OpenLinux/samba.daemon b/packaging/Caldera/OpenLinux/samba.daemon new file mode 100644 index 0000000000..96683702f5 --- /dev/null +++ b/packaging/Caldera/OpenLinux/samba.daemon @@ -0,0 +1,6 @@ +IDENT=samba +DESCRIPTIVE="SMB server processes (samba)" +CONFIGURED="no" +ONBOOT="no" +OPTIONS_SMB="-D" +OPTIONS_NMB="-D" diff --git a/packaging/Caldera/OpenLinux/samba.init b/packaging/Caldera/OpenLinux/samba.init new file mode 100755 index 0000000000..1b830a1da3 --- /dev/null +++ b/packaging/Caldera/OpenLinux/samba.init @@ -0,0 +1,62 @@ +#!/bin/sh +# +# description: Starts and stops the Samba smbd and nmbd daemons +# used to provide SMB network services. + +NAME_S=smbd +DAEMON_S=/usr/sbin/$NAME_S +NAME_N=nmbd +DAEMON_N=/usr/sbin/$NAME_N + +# Source function library. +. /etc/rc.d/init.d/functions + +# Source networking configuration. +. /etc/sysconfig/network + +# See how we were called. +case "$1" in + start) + [ -e $SVIlock ] && exit 1 + [ ${NETWORKING} = "no" ] && exit 2 + [ -x $DAEMON_S -a -x $DAEMON_N ] || exit 2 + + #[ "$CONFIGURED" != "no" -a "$CONFIGURED" != "false" ] || { + SVIemptyConfig /etc/samba.d/smb.conf && { + echo "$DESCRIPTIVE: not configured! Skipped..." + exit 2 + } + + echo -n "Starting $IDENT: " + ssd -S -n $NAME_S -x $DAEMON_S -- $OPTIONS_SMB + ssd -S -n $NAME_N -x $DAEMON_N -- $OPTIONS_NMB + + echo "." + touch $SVIlock + ;; + + stop) + [ -e $SVIlock ] || exit 0 + + echo -n "Stopping $IDENT: " + ssd -K -p /var/lock/samba.d/$NAME_N.pid -n $NAME_N #-x $DAEMON_N + ssd -K -p /var/lock/samba.d/$NAME_S.pid -n $NAME_S #-x $DAEMON_S + + echo "." + rm -f $SVIlock + ;; + + restart) + echo -n "Restarting $IDENT: " + $0 stop + $0 start + exit $? + ;; + + *) + echo "Usage: $SVIscript {start|restart|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/packaging/Caldera/OpenLinux/samba.logrotate b/packaging/Caldera/OpenLinux/samba.logrotate new file mode 100644 index 0000000000..46611f83d8 --- /dev/null +++ b/packaging/Caldera/OpenLinux/samba.logrotate @@ -0,0 +1,12 @@ +/var/log/samba.d/nmbd { + postrotate + /usr/bin/killall -HUP nmbd + endscript +} + +/var/log/samba.d/smbd { + postrotate + /usr/bin/killall -HUP smbd + endscript +} + diff --git a/packaging/Caldera/OpenLinux/samba.pam b/packaging/Caldera/OpenLinux/samba.pam new file mode 100644 index 0000000000..4588db1735 --- /dev/null +++ b/packaging/Caldera/OpenLinux/samba.pam @@ -0,0 +1,7 @@ +#%PAM-1.0 +#[For version 1.0 syntax, the above header is optional] +# +# The PAM configuration file for the `samba' service +# +auth required /lib/security/pam_pwdb.so shadow nullok +account required /lib/security/pam_pwdb.so diff --git a/packaging/Caldera/OpenLinux/smb.conf.sample b/packaging/Caldera/OpenLinux/smb.conf.sample new file mode 100644 index 0000000000..a00803ca18 --- /dev/null +++ b/packaging/Caldera/OpenLinux/smb.conf.sample @@ -0,0 +1,312 @@ +# This is the main Samba configuration file. You should read the +# smb.conf(5) manual page in order to understand the options listed +# here. Samba has a huge number of configurable options (perhaps too +# many!) most of which are not shown in this example +# +# Any line which starts with a ; (semi-colon) or a # (hash) +# is a comment and is ignored. In this example we will use a # +# for commentry and a ; for parts of the config file that you +# may wish to enable +# +# NOTE: Whenever you modify this file you should run the command "testparm" +# to check that you have not many any basic syntactic errors. +# +#======================= Global Settings ===================================== +[global] + +# workgroup = NT-Domain-Name or Workgroup-Name + workgroup = WORKGROUP + +# server string is the equivalent of the NT Description field + server string = Samba Server on Caldera OpenLinux + +# This option is important for security. It allows you to restrict +# connections to machines which are on your local network. The +# following example restricts access to two C class networks and +# the "loopback" interface. For more examples of the syntax see +# the smb.conf man page +; hosts allow = 192.168.1. 192.168.2. 127. + +# If you want to automatically load your printer list rather +# than setting them up individually then you'll need this + load printers = yes + +# you may wish to override the location of the printcap file +; printcap name = /etc/printcap + +# It should not be necessary to specify the print system type unless +# it is non-standard. Currently supported print systems include: +# bsd, sysv, plp, lprng, aix, hpux, qnx + printing = lprng + +# Uncomment this if you want a guest account, you must add this to /etc/passwd +# otherwise the user "nobody" is used +; guest account = pcguest + +# this tells Samba to use a separate log file for each machine +# that connects +; log file = /var/log/samba.d/smb.%m + +# Put a capping on the size of the log files (in Kb). + max log size = 50 + +# Security mode. Most people will want user level security. See +# security_level.txt for details. + security = user +# Use password server option only with security = server +; password server = <NT-Server-Name> + +# Password Level allows matching of _n_ characters of the password for +# all combinations of upper and lower case. +; password level = 8 +; username level = 8 + +# You may wish to use password encryption. Please read +# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. +# Do not enable this option unless you have read those documents +; encrypt passwords = yes +; smb passwd file = /etc/samba.d/smbpasswd + +# The following are needed to allow password changing from Windows to +# update the Linux sytsem password also. +# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above. +# NOTE2: You do NOT need these to allow workstations to change only +# the encrypted SMB passwords. They allow the Unix password +# to be kept in sync with the SMB password. +; unix password sync = Yes +; passwd program = /usr/bin/passwd %u +; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully* + +# Unix users can map to different SMB User names +; username map = /etc/samba.d/smbusers + +# Using the following line enables you to customise your configuration +# on a per machine basis. The %m gets replaced with the netbios name +# of the machine that is connecting +; include = /etc/samba.d/smb.conf.%m + +# Most people will find that this option gives better performance. +# See speed.txt and the manual pages for details + socket options = TCP_NODELAY + +# Configure Samba to use multiple interfaces +# If you have multiple network interfaces then you must list them +# here. See the man page for details. +; interfaces = 192.168.12.2/24 192.168.13.2/24 + +# Configure remote browse list synchronisation here +# request announcement to, or browse list sync from: +# a specific host or from / to a whole subnet (see below) +; remote browse sync = 192.168.3.25 192.168.5.255 +# Cause this host to announce itself to local subnets here +; remote announce = 192.168.1.255 192.168.2.44 + +# Browser Control Options: +# set local master to no if you don't want Samba to become a master +# browser on your network. Otherwise the normal election rules apply +; local master = no + +# OS Level determines the precedence of this server in master browser +# elections. The default value should be reasonable +; os level = 33 + +# Domain Master specifies Samba to be the Domain Master Browser. This +# allows Samba to collate browse lists between subnets. Don't use this +# if you already have a Windows NT domain controller doing this job +; domain master = yes + +# Preferred Master causes Samba to force a local browser election on startup +# and gives it a slightly higher chance of winning the election +; preferred master = yes + +# Use only if you have an NT server on your network that has been +# configured at install time to be a primary domain controller. +; domain controller = <NT-Domain-Controller-SMBName> + +# Enable this if you want Samba to be a domain logon server for +# Windows95 workstations. +; domain logons = yes + +# if you enable domain logons then you may want a per-machine or +# per user logon script +# run a specific logon batch file per workstation (machine) +; logon script = %m.bat +# run a specific logon batch file per username +; logon script = %U.bat + +# Where to store roving profiles (only for Win95 and WinNT) +# %L substitutes for this servers netbios name, %U is username +# You must uncomment the [Profiles] share below +; logon path = \\%L\Profiles\%U + +# All NetBIOS names must be resolved to IP Addresses +# 'Name Resolve Order' allows the named resolution mechanism to be specified +# the default order is "host lmhosts wins bcast". "host" means use the unix +# system gethostbyname() function call that will use either /etc/hosts OR +# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf +# and the /etc/resolv.conf file. "host" therefore is system configuration +# dependant. This parameter is most often of use to prevent DNS lookups +# in order to resolve NetBIOS names to IP Addresses. Use with care! +# The example below excludes use of name resolution for machines that are NOT +# on the local network segment +# - OR - are not deliberately to be known via lmhosts or via WINS. +; name resolve order = wins lmhosts bcast + +# Windows Internet Name Serving Support Section: +# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server +; wins support = yes + +# WINS Server - Tells the NMBD components of Samba to be a WINS Client +# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both +; wins server = w.x.y.z + +# WINS Proxy - Tells Samba to answer name resolution queries on +# behalf of a non WINS capable client, for this to work there must be +# at least one WINS Server on the network. The default is NO. +; wins proxy = yes + +# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names +# via DNS nslookups. The built-in default for versions 1.9.17 is yes, +# this has been changed in version 1.9.18 to no. + dns proxy = no + +# Case Preservation can be handy - system default is _no_ +# NOTE: These can be set on a per share basis +; preserve case = no +; short preserve case = no +# Default case is normally upper case for all DOS files +; default case = lower +# Be very careful with case sensitivity - it can break things! +; case sensitive = no + +#============================ Share Definitions ============================== +[homes] + comment = Home Directories +; this gives access to a 'Public' sub-directory in each user's home... +; (it is named 'public' as it is intended to be used by other sharing +; technologies (like NetWare, appletalk) too and may get disclosed due +; to weak protocols! -- hmm, are there less secure protocols than NFS? :) + path = %H/Public + valid users = %S + only user = yes + browseable = no + writable = yes + create mask = 0750 + +# Un-comment the following and create the netlogon directory for Domain Logons +; [netlogon] +; comment = Samba Network Logon Service +; path = /home/samba/netlogon +; guest ok = yes +; writable = no +; share modes = no + + +# Un-comment the following to provide a specific roving profile share +# the default is to use the user's home directory +;[Profiles] +; path = /home/samba/profiles +; browseable = no +; guest ok = yes + + +# NOTE: If you have a BSD-style print system there is no need to +# specifically define each individual printer +[printers] + comment = All Printers + path = /var/spool/samba + browseable = no +# Set public = yes to allow user 'guest account' to print + guest ok = no + writable = no + printable = yes + create mask = 0700 + +# A publicly accessible directory, but read only, except for people in +# the "users" group +;[public] +; comment = Public Stuff +; path = /home/public +; browseable = yes +; public = yes +; writable = yes +; printable = no +# access may be controlled by these options +; read list = user1, user2, @group +; valid users = user1, user3 +; write list = @users + +# Other examples. +# +# This one is useful for people to share files, BUT +# access to '/tmp' or '/var/tmp' should *not* be given lightly, +# as this can (still) pose a security threat! +# Better use a dedicate sub-directory to /(var/)tmp or something +# like a [public] share! +[tmp] + comment = Temporary file space + path = /tmp + browseable = yes + read only = yes + public = no + printable = no + +# A private printer, usable only by fred. Spool data will be placed in fred's +# home directory. Note that fred must have write access to the spool directory, +# wherever it is. +;[fredsprn] +; comment = Fred's Printer +; valid users = fred +; path = /homes/fred +; printer = freds_printer +; public = no +; writable = no +; printable = yes + +# A private directory, usable only by fred. Note that fred requires write +# access to the directory. +;[fredsdir] +; comment = Fred's Service +; path = /usr/somewhere/private +; valid users = fred +; public = no +; writable = yes +; printable = no + +# a service which has a different directory for each machine that connects +# this allows you to tailor configurations to incoming machines. You could +# also use the %u option to tailor it by user name. +# The %m gets replaced with the machine name that is connecting. +;[pchome] +; comment = PC Directories +; path = /usr/pc/%m +; public = no +; writable = yes + +# A publicly accessible directory, read/write to all users. Note that all files +# created in the directory by users will be owned by the default user, so +# any user with access can delete any other user's files. Obviously this +# directory must be writable by the default user. Another user could of course +# be specified, in which case all files would be owned by that user instead. +;[public] +; path = /usr/somewhere/else/public +; public = yes +; only guest = yes +; writable = yes +; printable = no + +# The following two entries demonstrate how to share a directory so that two +# users can place files there that will be owned by the specific users. In this +# setup, the directory should be writable by both users and should have the +# sticky bit set on it to prevent abuse. Obviously this could be extended to +# as many users as required. +;[myshare] +; comment = Mary's and Fred's stuff +; path = /usr/somewhere/shared +; valid users = mary fred +; public = no +; writable = yes +; printable = no +; create mask = 0765 + + diff --git a/packaging/Caldera/OpenLinux/smbadduser.perl b/packaging/Caldera/OpenLinux/smbadduser.perl new file mode 100755 index 0000000000..61bec2320d --- /dev/null +++ b/packaging/Caldera/OpenLinux/smbadduser.perl @@ -0,0 +1,146 @@ +#!/usr/bin/perl -w +# +# smbadduser - Written by Mike Zakharoff +# perl-rewrite by Raymund Will +# + +$smbpasswd = "/etc/samba.d/smbpasswd"; +$user_map = "/etc/samba.d/smbusers"; +# +# Set to site specific passwd command +# +$passwd = "cat /etc/passwd |"; +#$passwd = "niscat passwd.org_dir |"; +if ( -e "/var/run/ypbind.pid" ) { + $passwd = "(cat /etc/passwd; ypcat passwd ) |"; +} + +$line = "-" x 58; +if ($#ARGV < 0) { + print <<EoM; +$line +Written: Mike Zakharoff email: michael.j.zakharoff\@boeing.com + + 1) Updates $smbpasswd + 2) Updates $user_map + 3) Executes smbpasswd for each new user + +smbadduser unixid[:ntid] unixid[:ntid] ... + +Example: smbadduser zak:zakharoffm jdoe johns:smithj +$line +EoM + exit 1; +} + +# get valid UNIX-Ids (later skip missing) +%U = (); +{ + my $X = "X" x 32; + my @t = (); + + open( IN, $passwd) || die( "ERROR: open($passwd): $!\n"); + while ( <IN> ) { + next unless (/^[A-Za-z0-9_]+:/); + @t = split(/:/); + $U{$t[0]} = join( ":", ($t[0], $t[2], $X, $X, $t[4], $t[5], $t[6])); + } + close( IN); +} +# get all smb passwords (later skip already existent) +%S = (); +$Cs = ""; +if ( -r $smbpasswd ) { + open( IN, $smbpasswd) || die( "ERROR: open($smbpasswd): $!\n"); + while ( <IN> ) { + if ( /^\#/ ) { + $Cs .= $_; next; + } elsif ( ! /^([A-Za-z0-9_]+):/ ) { + chop; print STDERR "ERROR: $_: invalid smbpasswd entry!\n"; next; + } + $S{$1} = $_; + } + close( IN); +} +# get all map entries +%M = (); +$Cm = ""; +if ( -r $user_map ) { + open( IN, $user_map) || die( "ERROR: open($user_map): $!\n"); + while ( <IN> ) { + if ( /^\#/ ) { + $Cm .= $_; next; + } elsif ( ! /^([A-Za-z0-9_]+)\s*=\s*(\S.+\S)\s*/ ) { + chop; print STDERR "ERROR: $_: invalid user-map entry!\n"; next; + } + $M{$1} = $2; + } + close( IN); +} +# check parameter syntax +%N = (); +{ + foreach ( @ARGV ) { + my ( $u, $s, @R) = split(/:/); + if ( $#R >= 0 ) { + print STDERR "ERROR: $_: Must use unixid[:ntid] SKIPPING...\n"; + next; + } + $s = $u unless ( defined( $s) ); + if ( ! exists( $U{$u}) ) { + print STDERR "ERROR: $u: Not in passwd database SKIPPING...\n"; + next; + } + if ( exists( $S{$u}) ) { + print STDERR "ERROR: $u: Already in smbpasswd database SKIPPING...\n"; + next; + } + print "Adding: $u to $smbpasswd\n"; + $S{$u} = $U{$u}; + if ( $u ne $s ) { + if ( exists( $M{$u}) ) { + if ( $M{$u} !~ /\b$s\b/ ) { + print "Adding: $s to $u in $user_map\n"; + $M{$u} .= " $s"; + } + } else { + print "Mapping: $s to $u in $user_map\n"; + $M{$u} = $s; + } + } + $N{$u} = $s; + } +} +# rewrite $smbpasswd +{ + open( OUT, "> $smbpasswd.new") || die( "ERROR: open($smbpasswd.new): $!\n"); + $Cs = "#\n# SMB password file.\n#\n" unless ( $Cs ); + print OUT $Cs; + foreach ( sort( keys( %S)) ) { + print OUT $S{$_}; + } + close( OUT); + rename( $smbpasswd, $smbpasswd . "-"); + rename( $smbpasswd . ".new", $smbpasswd) || die; +} +# rewrite $user_map +{ + open( OUT, "> $user_map.new") || die( "ERROR: open($user_map.new): $!\n"); + $Cm = "# Unix_name = SMB_name1 SMB_name2 ...\n" unless ( $Cm ); + print OUT $Cm; + foreach ( sort( keys( %M)) ) { + print OUT "$_ = $M{$_}\n"; + } + close( OUT); + rename( $user_map, $user_map . "-"); + rename( $user_map . ".new", $user_map) || die; +} +# call 'smbpasswd' for each new +{ + foreach ( sort( keys( %N)) ) { + print $line . "\n"; + print "ENTER password for $_\n"; + system( "smbpasswd $_"); + } +} + diff --git a/packaging/Caldera/OpenLinux/smbprint b/packaging/Caldera/OpenLinux/smbprint new file mode 100755 index 0000000000..5d66aa1377 --- /dev/null +++ b/packaging/Caldera/OpenLinux/smbprint @@ -0,0 +1,77 @@ +#!/bin/sh + +# This script is an input filter for printcap printing on a unix machine. It +# uses the smbclient program to print the file to the specified smb-based +# server and service. +# For example you could have a printcap entry like this +# +# smb:lp=/dev/null:sd=/usr/spool/smb:sh:if=/usr/local/samba/smbprint +# +# which would create a unix printer called "smb" that will print via this +# script. You will need to create the spool directory /usr/spool/smb with +# appropriate permissions and ownerships for your system. + +# Set these to the server and service you wish to print to +# In this example I have a WfWg PC called "lapland" that has a printer +# exported called "printer" with no password. + +# +# Script further altered by hamiltom@ecnz.co.nz (Michael Hamilton) +# so that the server, service, and password can be read from +# a /var/spool/lpd/PRINTNAME/.config file. +# +# In order for this to work the /etc/printcap entry must include an +# accounting file (af=...): +# +# cdcolour:\ +# :cm=CD IBM Colorjet on 6th:\ +# :sd=/var/spool/lpd/cdcolour:\ +# :af=/var/spool/lpd/cdcolour/acct:\ +# :if=/usr/local/etc/smbprint:\ +# :mx=0:\ +# :lp=/dev/null: +# +# The /usr/var/spool/lpd/PRINTNAME/.config file should contain: +# server=PC_SERVER +# service=PR_SHARENAME +# password="password" +# +# E.g. +# server=PAULS_PC +# service=CJET_371 +# password="" + +# +# Debugging log file, change to /dev/null if you like. +# +# logfile=/tmp/smb-print.log +logfile=/dev/null + + +# +# The last parameter to the filter is the accounting file name. +# Extract the directory name from the file name. +# Concat this with /.config to get the config file. +# +eval acct_file=\${$#} +spool_dir=`dirname $acct_file` +config_file=$spool_dir/.config + +# Should read the following variables set in the config file: +# server +# service +# password +eval `cat $config_file` + +# +# Some debugging help, change the >> to > if you want to save space. +# +echo "server $server, service $service" >> $logfile + +( +# NOTE You may wish to add the line `echo translate' if you want automatic +# CR/LF translation when printing. +# echo translate + echo "print -" + cat +) | /usr/bin/smbclient "//$server/$service" $password -U $server -N -P >> $logfile 2>&1 diff --git a/packaging/Caldera/OpenLinux/smbusers b/packaging/Caldera/OpenLinux/smbusers new file mode 100644 index 0000000000..ae3389f53f --- /dev/null +++ b/packaging/Caldera/OpenLinux/smbusers @@ -0,0 +1,3 @@ +# Unix_name = SMB_name1 SMB_name2 ... +root = administrator admin +nobody = guest pcguest smbguest diff --git a/packaging/Caldera/OpenLinux/updatesmbpasswd.perl b/packaging/Caldera/OpenLinux/updatesmbpasswd.perl new file mode 100755 index 0000000000..60f572b490 --- /dev/null +++ b/packaging/Caldera/OpenLinux/updatesmbpasswd.perl @@ -0,0 +1,10 @@ +#!/usr/bin/perl -w +while ( <> ) { + print; + @V = split(/:/); + $_ = $V[3]; + if ( $V[0] !~ /^\#/ && !(/^[0-9A-F]{32}$/ || /^X{32}$/ || /^\*{32}$/) ) { + $V[3] = "X" x 32; + } + print( join( ':', @V)); +} |