diff options
Diffstat (limited to 'packaging/Debian')
178 files changed, 10794 insertions, 26 deletions
diff --git a/packaging/Debian/debian-stable/README.build b/packaging/Debian/debian-sarge/README.build index 0a11a1f6ea..0a11a1f6ea 100644 --- a/packaging/Debian/debian-stable/README.build +++ b/packaging/Debian/debian-sarge/README.build diff --git a/packaging/Debian/debian-sarge/README.build-upstream b/packaging/Debian/debian-sarge/README.build-upstream new file mode 100644 index 0000000000..8efe8164c8 --- /dev/null +++ b/packaging/Debian/debian-sarge/README.build-upstream @@ -0,0 +1,78 @@ +Building Samba Packages for Debian GNU/Linux +-------------------------------------------- + +Building Debian packages is not as hard as some people might think. +The following instructions will allow you to build your own Samba +Debian packages. These instructions and the files in packaging/Debian/ +should be current as of Samba 3.0.2, and allow you to build Debian +packages for Debian unstable (so you need some development packages +available only in Debian unstable.) If you are using something newer +than 3.0.2 you might want to try to follow the instructions to see if +patches apply cleanly. If some patches don't apply cleanly please e-mail +samba@packages.debian.org since we might have fixed patches that we have +not yet integrated into upstream Samba. + +We try to maintain as much compatibility with previous releases +of Debian as possible, so it is possible that the files in +packaging/Debian/ can also be used to build Samba Debian packages for +other Debian releases. However, sometimes this is just not possible +because we need to use stuff that is only available on Debian unstable. + +Instructions +------------ + +If you want to build Samba packages for Debian and you just want to use +upstream sources, i.e. you don't want to wait for us to put official +packages out, or you want packages for a Debian version for which we +don't provide deb's, or you don't want to use official packages, or +you want to add --this-cool-switch to configure, or whatever, follow +these instructions: + +0) Make sure you have the following packages installed (in addition +to the normal Debian development packages -- dpkg-dev, libc6-dev, +devscripts, etc.): + + autoconf + debhelper (>= 4.1.13) + libpam0g-dev + libreadline4-dev + libcupsys2-dev + libacl1-dev, libacl1 (>= 2.2.11-1) + libkrb5-dev + libldap2-dev + po-debconf + python2.3-dev + + Notes regarding the packages required to build Samba Debian packages: + + * The libcupsys2-dev is not available in Debian Potato (Debian 2.2). + That's fine; the configure script won't detect CUPS support and the + resulting binaries won't support CUPS. + + * The list above is current as of samba-3.0.0rc2, but it can get + out of date. The best way to check what packages are required to + build the samba packages on Debian is to look for the Build-Depends: + field in the file debian/control. + +1) cd samba[-<version>]. For example, "cd samba-3.0.2". +2) cp -a packaging/Debian/debian/ . + It's important that you copy instead of symlink because the build + tools in Potato have a problem that prevents the build to work with + a symlink. If you are running a recent Debian distribution you don't + have to copy the directory and you can use a symlink instead: + "ln -s packaging/Debian/debian/ ." +3) dch -i (this is completely optional - only do it if you understand + Debian version numbers! Don't complain later if you can't upgrade + to official versions of the Samba packages for Debian.) + - Edit the changelog and make sure the version is right. For example, + for Samba 3.0.2, the version number should something like 3.0.2-0.1. +4) Run 'fakeroot debian/rules binary'. +5) That's it. Your new packages should be in ../. Install with dpkg. + +Please e-mail samba@packages.debian.org with comments, questions or +suggestions. Please talk to us and not to the Samba Team. They have +better things to do and know nothing about the Debian packaging system. + +Eloy A. Paris <peloy@debian.org> +Steve Langasek <vorlon@debian.org> + diff --git a/packaging/Debian/debian-sarge/README.debian b/packaging/Debian/debian-sarge/README.debian new file mode 100644 index 0000000000..c5324a12ff --- /dev/null +++ b/packaging/Debian/debian-sarge/README.debian @@ -0,0 +1,175 @@ +0. Samba Team Notes: +This package is targeted at the current stable release of debian distribution +(sarge) running on a 2.6.x kernel. +This package has been made by Simo Sorce on behalf of the Samba Team. +Do not use Debian BTS to report bugs, it's not a debian project package. +Thanks to Eloy Paris and Steve "Vorlon" Langasek for the work they've done +and continue to do on debian unstable packages. That greatly helps me in +building up debian packages for the Team. + + +WARNING: This package has been built on a 2.6.x kernel ! + +Samba for Debian +---------------- + +This package was built by Eloy Paris <peloy@debian.org> and Steve Langasek +<vorlon@debian.org>, current maintainers of the Samba packages for Debian, +based on previous work from Bruce Perens <Bruce@Pixar.com>, Andrew +Howell <andrew@it.com.au>, Klee Dienes <klee@debian.org> and Michael +Meskes <meskes@topsystem.de>, all previous maintainers of the packages +samba and sambades (merged together for longer than we can remember.) + +Contents of this README file: + +1. Notes +2. Upgrading from Samba 2.2 +3. Packages Generated from the Samba Sources +4. Support for NT Domains +5. Reporting bugs + + +1. Notes +-------- + +- As of Samba 2.0.6-1, the Debian version of Samba is compiled with + Pluggable Authentication Modules (PAM) support. PAM support was + discontinued during the libc5 -> libc6 migration process and I never + brought it back until 2.0.6-1. + +- The smbfs package does not support the 2.0.x Linux kernels anymore. + This has been the case since the very first packages of the CVS sources + that eventually became Samba 2.2. To use the smbfs package you need to + run a 2.2.x kernel or later. + +- Starting with the Debian packages for Samba 2.2, the Samba log files (for + nmbd and smbd) have been moved to a new location: /var/log/samba/. The + files also have new names: log.nmbd and log.smbd. The old files + (/var/log/{nmb,smb} were moved to the new location. + + +2. Upgrading from Samba 2.2 +--------------------------- + +Samba 3.0 provides greatly improved support for modern Windows systems, +including support for Unicode and LDAP. In the process, Samba 3.0 +necessarily also breaks backward compatiblity with past releases. These +issues are documented herein; if you are aware of other problems related +to upgrading from Samba 2.2, please let us know at +<samba@packages.debian.org>. + +Samba and LDAP +-------------- +Starting with Samba 2.999+3.0cvs20020723-1 we are building Samba with +LDAP support. However, the LDAP schema for Samba 3.0 differs +substantially from the schema used by many sites with Samba 2.2 (not +enabled in the Debian packages). If upgrading from an LDAP-enabled 2.2, +you will need to run the convertSambaAccount script found in +/usr/share/doc/samba-doc/examples/LDAP. A copy of the schema itself can +also be found at /usr/share/doc/samba-doc/examples/LDAP/samba.schema. + +Character Sets +-------------- +Samba 3.0 introduces support for negotiating Unicode (UCS-2LE) with +Windows clients. Owing to the close similarity between Windows and Unix +NLS charsets, in the past, many users were able to pass filenames +containing non-ASCII characters between clients and servers without +configuring Samba to know what character set was in use. Now, Samba +must be able to convert Unix filenames to Unicode before sending to the +client, so Samba must know what character set the filenames are being +converted from. If you will be sharing files with non-ASCII names, and +the filenames are not encoded with UTF-8, you will need to tell Samba +which character set to use with the 'unix charset' option. + +If you had previously specified 'character set' and 'client code page' +options under 2.2, these settings should be automatically converted for +you. + + +3. Packages Generated from the Samba Sources +-------------------------------------------- + +Currently, the Samba sources produce the following binary packages: + +samba: A LanManager like file and printer server for Unix. +samba-common: Samba common files used by both the server and the client. +smbclient: A LanManager like simple client for Unix. +swat: Samba Web Administration Tool +samba-doc: Samba documentation. +smbfs: Mount and umount commands for the smbfs (works with 2.2.x and + above kernels, not with 2.0.x kernels.) +libpam-smbpass: pluggable authentication module for SMB password + database. +libsmbclient: Shared library that allows applications to talk to SMB servers. +libsmbclient-dev: libsmbclient shared libraries. +winbind: Service to resolve user and group information from a Windows NT + server. +python2.2-samba: Python bindings that allow access to various aspects of + Samba. + +Please note that the package smbwrapper (a shared library that provides +SMB client services that existed between Samba 2.0.0-1 and Samba-2.0.5a-4 +does not exist any more. The reason is that starting with Samba 2.0.6-1, that +code does not even compile, and the upstream author (Andrew Tridgell) +recommended to disable the compilation of smbwrapper until some issues +with glibc2.1 get cleared out (the problem is with glibc, not with Samba +itself). + + +4. Support for NT Domains +------------------------- + +Samba 2.2 includes preliminary support for NT domains. A Samba server +can now be part of a Windows NT domain whose Primary Domain Controller +is a Windows NT server. This feature is supposed to be stable although I +haven't tried it myself. Read the documentation in the samba-doc package +for help on how to do this (hint: "security = domain" in the smb.conf +file). + +Samba 2.2 has also experimental support for Primary Domain +Controller. This means that a Samba server can act now as a PDC. There +are no special flags needed to compile Samba with NT domain PDC +support. Please read the NTDOM PDC FAQ at www.samba.org (Documentation +section). + +Please note that NT domain PDC support is far from complete and is still +experimental. + + +5. Reporting Bugs +----------------- + +If you believe you have found a bug please make sure the possible bug +also exists in the latest version of Samba that is available for the +unstable Debian distribution. If you are running Debian stable this +means that you will probably have to build your own packages. And if the +problem does not exist in the latest version of Samba we have packaged it +means that you will have to run the version of Samba you built yourself +since it is not easy to upload new packages to the stable distribution, +unless they fix critical security problems. + +If you can reproduce the problem in the latest version of Samba then +it is likely to be a real bug. Your best shot is to search the Samba +mailing lists to see if it is something that has already been reported +and fixed - if it is a simple fix we can add the patch to our packages +without waiting for a new Samba release. + +If you decide that your problem deserves to be submitted to the Debian +Bug Tracking System (BTS) we expect you to be responsive if we request +more information. If we request more information and do not receive +any in a reasonable time frame expect to see your bug closed without +explanation - we can't fix bugs we can't reproduce, and most of the +time we need more information to be able to reproduce them. + +When submitting a bug to the Debian BTS please include the version of +the Debian package you are using as well as the Debian distribution you +are using. Think _twice_ about the severity you assign to the bug: we +are _very_ sensitive about bug severities; the fact that it doesn't +work for you doesn't mean that the severity must be such that it holds +a major Debian release. In fact, that it doesn't work for you it +doesn't mean that it doesn't work for others. So again: think _twice_. + + +Eloy A. Paris <peloy@debian.org> +Steve Langasek <vorlon@debian.org> + diff --git a/packaging/Debian/debian-stable/TODO b/packaging/Debian/debian-sarge/TODO index 5883f72a92..5883f72a92 100644 --- a/packaging/Debian/debian-stable/TODO +++ b/packaging/Debian/debian-sarge/TODO diff --git a/packaging/Debian/debian-sarge/changelog b/packaging/Debian/debian-sarge/changelog new file mode 100644 index 0000000000..0f8f381d0f --- /dev/null +++ b/packaging/Debian/debian-sarge/changelog @@ -0,0 +1,2575 @@ +samba (3.0.20b-1) stable; urgency=low + + * samba 3.0.20b Samba Team Release + + -- Simo Sorce <idra@samba.org> Sun, 23 Oct 2005 11:58:30 +0200 + +samba (3.0.14a-3) unstable; urgency=high + + * Urgency set to high for a bug that makes smbclient/libsmbclient + /almost/ mostly unusable + * Fix smbclient's search continuation logic so that it works correctly + against 2K servers offering VFAT-hosted shares; many thanks to + Jeremy Allison for the timely upstream fix. Closes: #309798. + * Update pt_BR debconf translation. Thanks to Andre Luis Lopes + <andrelop@debian.org>. (closes: #308510) + * Add Russian debconf translation, thanks to Yuriy Talakan + <yt@amur.elektra.ru>. (closes: #310063) + + -- Steve Langasek <vorlon@debian.org> Thu, 26 May 2005 23:37:57 -0700 + +samba (3.0.14a-2) unstable; urgency=low + + * Point the sense of the file_is_special() check right way around; + thanks to Matthijs Mohlmann for catching this. Closes: #305747. + * debian/patches/dos7-xcopy-always-copies-files.patch: + Fix the MS-DOS 7 XCOPY copying files over and over bug + Closes: #309003 + * Steve Langasek <vorlon@debian.org>: + - Add Christian Perrier to Uploaders:. Thanks, Christian :) + + -- Steve Langasek <vorlon@debian.org> Sun, 8 May 2005 04:43:21 -0700 + +samba (3.0.14a-1) unstable; urgency=low + + * New upstream version + - A more complete upstream fix for missing files in file listings, + should really give us working (closes: #302771); drop + xp-missing-files.patch, which has been superseded. + * Use the right path when removing mount.cifs binary in the clean + target. Closes: #303318. + + -- Steve Langasek <vorlon@debian.org> Mon, 18 Apr 2005 03:22:29 -0700 + +samba (3.0.11-1) unstable; urgency=high + + * New upstream version + - Fixes duplicated entry in swat(8) manpage (closes: #292957). + - Fix queue handling so that processes serving print clients don't + spin off into infinity and clobber the system (closes: #274969). + - Make sure we use C-locale toupper/tolower functions for case + conversion, since Turkish pairing rules are incompatible + (closes: #286174). + * Fix logrotate script to exit true instead of false when nmbd.pid is + missing (closes: #287263). + * Added Portuguese debconf translation. Thanks to Miguel Figueiredo + <elmig@debianpt.org>. (closes: #286375) + * Added Italian debconf translation. Thanks to Luca Monducci + <luca.mo@tiscali.it>. (closes: #284125) + * Add support for building on the Debian BSD and Hurd ports; thanks to + Robert Millan for the patch. (closes: #266693) + * debian/patches/xp-missing-files.patch: import patch from upstream to + fix missing entries in directory listings when talking to WinXP + servers (closes: #297771). + + -- Steve Langasek <vorlon@debian.org> Wed, 23 Mar 2005 00:13:16 -0800 + +samba (3.0.10-1) unstable; urgency=high + + * New upstream release. + - CAN-2004-1154: integer overflow can lead to remote code execution + by authenticated users; closes: #286023. + * High-urgency upload for sarge-targetted RC bugfix. + * Sync the fhs.patch to samba 3.0.10. + * Install mount.cifs suid root, to make user mounts possible + (closes: #283819). + * debian/patches/cups.patch: Change the default printing system, so we + can compile in CUPS support without making it the default -- CUPS is + not a reasonable default on Debian, at least for sarge. + + -- Steve Langasek <vorlon@debian.org> Fri, 17 Dec 2004 11:56:01 -0800 + +samba (3.0.9-1) unstable; urgency=low + + * New upstream release + - Fixes Win9x printing; closes: #283530, #282571, #283818. + - Fixes a problem with setting dosmodes on filesystems without ACL + support; closes: #283661. + - Drop ldapsam_compat.patch, redundant now that a fix is integrated + upstream + + -- Steve Langasek <vorlon@debian.org> Thu, 2 Dec 2004 01:11:39 -0800 + +samba (3.0.8-2) unstable; urgency=low + + * Fix the module paths for python2.3-samba so that "import foo from samba" + works, and include the __init__.py glue; closes: #222867). + * Enable quota support; closes: #246839. + * Fix missing symbols in libsmbclient (and libnss_wins), and add + -Wl,-z,defs to the libsmbclient link options to prevent future + instances of undefined symbols (closes: #281181). + * Fix for the legacy ldapsam_compat backend; thanks to Fabien + Chevalier for the patch (closes: #274155). + + -- Steve Langasek <vorlon@debian.org> Mon, 15 Nov 2004 06:54:13 -0800 + +samba (3.0.8-1) unstable; urgency=high + + * New upstream package. Urgency set to "high" because of a potential + Denial of Service vulnerability in previous 3.0.x releases + (CAN-2004-0930). (Eloy) + * Introduce new -dbg package, so we can make better sense out of the + cleverly-supplied backtrace emails. (Vorlon) + * Applied patch from Luke Mewburn <luke@mewburn.net> to fix missing + lock_path() to state_path() change in the FHS patches. (Eloy) + + -- Eloy A. Paris <peloy@debian.org> Mon, 8 Nov 2004 13:39:34 -0500 + +samba (3.0.7-2) unstable; urgency=high + + * High-urgency upload for sarge-targetted RC fixes. + * Use autogen.sh in unpatch-source as well as in patch-source, to get + rid of the autom4te.cache cruft. + * debian/patches/make-distclean.patch: add some missing files to the + distclean target in source/Makefile.in (mostly-fixes: #276203). + * Change compile-time default of 'use sendfile' to 'no', since the + current Samba implementation is broken (closes: #261917, #275741, + #270175). + * Add mount.cifs into the smbfs package; thanks to Igor Belyi for + showing us just how simple this patch should be. ;) Since cifs is + the preferred kernel driver in 2.6, bugs related to smbfs and 2.6 + are considered closed unless someone can show that they exist with + the cifs driver as well (closes: #249890, #269443, #227791, #236869, + #260707, #261808, #270175). + * Fix FHS migration code so that it only affects upgrades from old + package versions, and doesn't cause us to mess with non-standard + directories that may have been re-added by the admin + (closes: #251858). + + -- Steve Langasek <vorlon@debian.org> Tue, 26 Oct 2004 01:35:23 -0700 + +samba (3.0.7-1) unstable; urgency=high + + * New upstream release. This release fixes two possible denial of + service conditions; one in nmbd and one in smbd. The CVE numbers + for these vulnerabilities are: + + CAN-2004-0807 for the smbd DoS + CAN-2004-0808 for the nmbd DoS + + Urgency is set to "high" because of these vulnerabilities; so this + new release propagates to testing ASAP. + + Thanks to the Samba Team and the Debian Security Team for the + heads up. + * Remove post-3.0.6 patches that are now in 3.0.7. + + -- Eloy A. Paris <peloy@debian.org> Mon, 13 Sep 2004 00:53:38 -0400 + +samba (3.0.6-4) unstable; urgency=low + + * Update LDAP schema (closes: #269797). + * Applied a couple of upstream fixes that will be present in Samba 3.0.7. + + -- Eloy A. Paris <peloy@debian.org> Tue, 7 Sep 2004 15:28:42 -0400 + +samba (3.0.6-3) unstable; urgency=low + + * Put libsmbclient where it belongs, in /usr/lib. (closes: #267704) + + -- Eloy A. Paris <peloy@debian.org> Wed, 25 Aug 2004 01:58:37 -0400 + +samba (3.0.6-2) unstable; urgency=low + + * Added Danish debconf translation. Thanks to Claus Hindsgaul + <claus_h@image.dk>. (closes: #232884) + + -- Eloy A. Paris <peloy@debian.org> Mon, 23 Aug 2004 17:24:19 -0400 + +samba (3.0.6-1) unstable; urgency=low + + * New upstream version. + * Incorporate Turkish debconf translation; thanks to Recai Oktas + <roktas@omu.edu.tr>. (closes: #252031) + * Update pt_BR debconf translation. Thanks to Andre Luis Lopes + <andrelop@debian.org>. (closes: #208113) + + -- Eloy A. Paris <peloy@debian.org> Mon, 23 Aug 2004 12:34:44 -0400 + +samba (3.0.5-2) unstable; urgency=high + + * Patches from Fabien Chevalier <fabien.chevalier@supelec.fr> + to fix: + + libnss_wins crashes other programs (closes: #252591) + + Can't list share files/dirs, but can acces deeper files/dirs + (closes: #264572) + + Samba 3.0.5 Printserver doesn't work with WinXP SP2 (closes: #265871) + * Urgency "high" to make it into testing as soon as possible since + at least #265871 is pretty bad now that WinXP SP2 has been released. + Thanks for the help Fabien! Both Vorlon and I have been very busy + lately. + + -- Eloy A. Paris <peloy@debian.org> Wed, 18 Aug 2004 13:25:41 -0400 + +samba (3.0.5-1) unstable; urgency=high + + * New upstream version. Urgency "high" because of potential buffer + overflows. The security fixes are the only difference between + 3.0.4 and 3.0.5. + + -- Eloy A. Paris <peloy@debian.org> Thu, 22 Jul 2004 08:07:36 -0400 + +samba (3.0.4-5) unstable; urgency=low + + * Doh! Build-depends on libcupsys2-dev (>=1.1.20final+cvs20040330-4), + not an unversioned libcupsys2-dev. (closes# 250523) + + -- Eloy A. Paris <peloy@debian.org> Tue, 25 May 2004 07:43:54 -0400 + +samba (3.0.4-4) unstable; urgency=low + + * Rebuilt with libcupsys2-gnutls10 for unstable. + Closes: #250424, #250483, #250491, #250515, #250523, #250592, #250736 + Closes: #250742, #250733 + + -- Eloy A. Paris <peloy@debian.org> Mon, 24 May 2004 22:32:52 -0400 + +samba (3.0.4-3) unstable; urgency=low + + * Color me stupid; I uploaded an experimental version to unstable. + + -- Eloy A. Paris <peloy@debian.org> Sat, 22 May 2004 00:40:58 -0400 + +samba (3.0.4-1) unstable; urgency=low + + Eloy: + + * New upstream version. + Closes: #247640 (New upstream version available) + Closes: #238905 (Printing crash fix) + Closes: #247090 (panic in viewing printerqueue) + + Vorlon: + + * Incorporate Catalan debconf translations; thanks to + Aleix Badia i Bosch <abadia@ica.es> and the Debian L10n Catalan Team. + (closes: #236640) + * Incorporate Czech debconf translations; thanks to + Miroslav Kure <kurem@upcase.inf.upol.cz> (closes: #236274). + * Update libsmbclient shlibs, due to an incompatibility with older + versions that prevents gnome-vfs from working correctly + (closes: #245869). + + -- Eloy A. Paris <peloy@debian.org> Fri, 21 May 2004 11:42:19 -0400 + +samba (3.0.2a-1) unstable; urgency=low + + * New upstream version. + + -- Eloy A. Paris <peloy@debian.org> Tue, 24 Feb 2004 10:30:47 -0500 + +samba (3.0.2-2) unstable; urgency=high + + * Apply patch from Urban Widmark <urban@teststation.com> to prevent + users from mounting remote filesystems containing suid files + (closes: 232327). This represents an exploitable security hole on + systems running Linux 2.6 kernels. + + -- Steve Langasek <vorlon@debian.org> Thu, 12 Feb 2004 21:38:40 -0600 + +samba (3.0.2-1) unstable; urgency=high + + * New upstream release. + - LaMont Jones: correct false failure LFS test that resulted + in _GNU_SOURCE not being defined (thus resulting in strndup() + not being defined) (closes: #226694) + - Segfault fixes. (closes: #230012) (maybe more, but we need bug + reporters to confirm.) + + Urgency "high" due to a password initialization bug that could grant + an attacker unauthorized access to a user account created by the + mksmbpasswd.sh shell script. See WHATSNEWS.txt for details and + workarounds for those not wishing to upgrade (which is a bad idea + anyway since this new release fixes lots of other bugs.) + + -- Eloy A. Paris <peloy@debian.org> Sun, 8 Feb 2004 10:06:29 -0500 + +samba (3.0.1-2) unstable; urgency=low + + * Include ntlm_auth's man page. + * Don't create directories outside of the source directory during + package build time. (closes: #227221, #227238, #225862) + * Don't include the "Using Samba" book in the swat package, just a + symlink that points to the book included in the samba-doc package. + + -- Eloy A. Paris <peloy@debian.org> Tue, 13 Jan 2004 13:48:13 -0500 + +samba (3.0.1-1) unstable; urgency=low + + * New upstream version (closes: #225565) + * Add support in the dhcp hook for netbios scope, and handle better + the case of multiple DHCP-using interfaces (closes: #224109). + * Use "tail -n 1 ..." instead of "tail -1 ..." so POSIX-compliant + tail works. Thanks to Paul Eggert <eggert@twinsun.com>. + * Include /usr/bin/ntlm_auth in the winbind package. + * Run configure with "--with-piddir=/var/run/samba" since the + default got changed to /var/run in this new upstream version. + + -- Eloy A. Paris <peloy@debian.org> Tue, 30 Dec 2003 16:21:31 -0500 + +samba (3.0.0final-1) unstable; urgency=low + + * It's here, it's here, it's here, Samba 3.0.0 is here! + * Incorporate Japanese debconf translations; thanks to Kenshi Muto + <kmuto@debian.org>. (closes: #209291) + + -- Eloy A. Paris <peloy@debian.org> Thu, 25 Sep 2003 13:39:28 -0400 + +samba (3.0.0beta2+3.0.0rc4-1) unstable; urgency=low + + * New upstream version. + + -- Eloy A. Paris <peloy@debian.org> Sat, 13 Sep 2003 08:47:56 -0400 + +samba (3.0.0beta2+3.0.0rc3-1) unstable; urgency=low + + * New upstream release. Last Release Candidate according to the + Samba Team. Samba 3.0.0 is around the corner, in a week or so. + - Fixes use of non-PIC code in nss shared libraries (closes: #208773) + - 'unix password sync' option now runs the unix password program as + root again (closes: #209739). + * One-line patch to make packages buildable with distcc (closes: #210227) + + -- Eloy A. Paris <peloy@debian.org> Tue, 9 Sep 2003 07:57:16 -0400 + +samba (3.0.0beta2+3.0.0rc2-1) unstable; urgency=low + + * New upstream release. + * Link against libgnutls7 instead of libgnutls5. (closes: #208151) + + -- Eloy A. Paris <peloy@debian.org> Tue, 2 Sep 2003 21:37:13 -0400 + +samba (3.0.0beta2+3.0.0rc1-1) unstable; urgency=low + + * New upstream version (skipped samba 3.0.0beta3 due to time + constraints.) This ugly version number will go away when the final + Samba 3.0.0 is released. + * Drag new unpackaged tools into the packages: smbcquotas (smbclient), + vfs modules (samba), smbtree(1) manpage (smbclient), tdbbackup(8) + manpage (samba). (closes: #151158) + * Switch to DH_COMPAT level 4: + - no explicit conffile listings needed + - the postinst for libsmbclient is now completely autogenerated + - use the default init script handling (with support for + invoke-rc.d) in debhelper, instead of the currently buggy upgrade + path (closes: #185439) + - add support for ${misc:Depends} in control for those packages with + init scripts + * Add versioned dependency on libpam-runtime and change + /etc/pam.d/samba to use the new common PAM config blocks. + * New python2.3-samba package (old python2.2-samba is no more.) + (closes: #206171) + + -- Eloy A. Paris <peloy@debian.org> Mon, 25 Aug 2003 17:05:14 -0400 + +samba (3.0.0beta2-1) unstable; urgency=low + + * New upstream release + - The smb.conf(5) manpage documents config options again + (closes: #197963). + - Handling of winbind/idmap has been restructured; domain members + should be able to map domain accounts to local accounts again + (closes: #196815). + - Use the locale charset for 'display charset' by default + (closes: #194406). + - Fix for segfault in smbclient when using the -b option + (closes: #196833). + - Handle an empty 'passdb backend' list gracefully (closes: #193946). + * Don't set 'display charset' anymore on upgrade, since this is now + grabbed from the locale by default -- a much better option. + * Removed time.c.patch which is now in the upstream sources. + * Update FHS patch for two new tdb files (netsamlogon_cache.tdb, + privilege.tdb). + * Remove python-linker.patch, since the Kerberos package has been + fixed to no longer use rpath + * Remove configure.patch: the hppa glibc bug this was added for is + long since fixed, and upstream isn't interested in supporting this + kludge. + * Update references to missing documentation in sample smb.conf file + (closes: #187632). + * Fix handling of krb5 link line, building on a patch from Stefan + Metzmacher <metze@metzemix.de>. + * Add patch so smbclient's tar support works with popt + (closes: #194921). + + -- Steve Langasek <vorlon@debian.org> Wed, 2 Jul 2003 20:59:09 -0500 + +samba (3.0.0beta1-2) unstable; urgency=low + + * Update build-deps to libacl1-dev (>= 2.2.11-1), libacl1 (>= 2.2.11-1) + to make sure we get the right shlib dependencies (closes: #193149). + * Update the dhcp config hooks so they're suitable for sourcing (i.e., + don't call "exit") (closes: #196477). + * Bring package into line with current policy by adding support for + the DEB_BUILD_OPTIONS flag, and enabling debugging symbols (-gstabs) + by default + * Make sure libpam-smbpass is a self-contained DSO. + * Fix a typo in samba-common.dhcp that caused us to spuriously rewrite + the server list. + * Fix python install script to ignore -Wl linker flags, as seen in the + output from the latest krb5-config. + * Add LDAP and Unicode information about upgrading from 2.2 to + README.debian. + * Remove dangerous and confusing browse options from the default + smb.conf (closes: #198804). + * Reorder smb.conf options for clearer grouping, and clarify the + comments. + * Add a default [print$] share to the sample smb.conf, and create the + necessary tree under /var/lib/samba/printers. (closes: #168173) + * s/winbind/idmap/ in smb.conf, since the option names have changed. + * Fix the patch for postexec handling, so that we chdir("/") at the + right time. + + -- Steve Langasek <vorlon@debian.org> Thu, 12 Jun 2003 15:02:00 -0500 + +samba (3.0.0beta1-1) unstable; urgency=low + + * New upstream version. + - fix for empty browselist bug (closes: #194553) + - fix for tab completion segfault in smbclient (closes: #194776) + - Samba now works as a domain member again without segfaulting + (closes: #194134, #194394, #194775) + - WinXP machines can join a Samba-controlled domain again + (closes: #195362) + * Build-depend on python-dev >= 2.2 instead of on just python-dev + (without version). + * Added Vorlon'n patch to source/lib/time.c to fix #194075. + (closes: #194075) + + -- Eloy A. Paris <peloy@debian.org> Sun, 8 Jun 2003 22:26:43 -0400 + +samba (2.999+3.0.alpha24-3) unstable; urgency=low + + * Make sure Samba DSOs are compiled with -fPIC. (closes: #194324) + * Rebuild against pristine Kerberos libs, to squelch warnings about + versioned symbols. (closes: #194431, #194396) + + -- Steve Langasek <vorlon@debian.org> Thu, 22 May 2003 15:32:00 -0500 + +samba (2.999+3.0.alpha24-2) unstable; urgency=low + + * Fixed description of the smbfs package. (closes: #194183) + * Negate the sense of the unixsam check when upgrading. (closes: #194234) + + -- Steve Langasek <vorlon@debian.org> Wed, 21 May 2003 12:21:53 -0400 + +samba (2.999+3.0.alpha24-1) unstable; urgency=low + + * New upstream version. (closes: #189354) + + -- Eloy A. Paris <peloy@debian.org> Tue, 20 May 2003 13:55:57 -0400 + +samba (2.999+3.0.alpha23-5) unstable; urgency=low + + * Move the python package from section "net" to section "python". + * Make sure we use PIC code for python on all platforms. + * French translation of an additional debconf template, courtesy of + Christian Perrier <bubulle@debian.org>. (closes: #188832) + * Updated Brazilian Portuguese translation from André LuÃs Lopes + <andrelop@ig.com.br>. + * s/unixsam/guest/ everywhere, since the unixsam backend is now + deprecated. (closes: #190095) + * Create our temp config file as /etc/samba/smb.conf.dpkg-tmp; not + only does using /tmp violate SELinux policies, it introduces the + possibility of data loss during the final copy if /tmp is a separate + filesystem. (closes: #189823) + * Pull in fix for SWAT, so that logins work again + (closes: #188255, #192077). + * Move passdb.tdb into /var/lib/samba, since it's not user-editable. + * Make sure with don't ship any .cvsignore files. + * Don't ship examples for python2.2-samba and samba-doc in an + "examples" directory inside another "examples" directory. + + -- Eloy A. Paris <peloy@debian.org> Tue, 6 May 2003 12:05:46 -0400 + +samba (2.999+3.0.alpha23-4) unstable; urgency=low + + * Instead of s/LPT1:/LPT:/, we need to do s/LPT:/LPT1:/ -- now all + non-RPC printing clients are working again. + * Change shlibs to 0 instead of 0.1. The library already in the + archive is using this soname, and there are no packages depending + on libsmbclient, so skip changing the package name for now. + (closes: #188661) + + -- Steve Langasek <vorlon@debian.org> Fri, 11 Apr 2003 14:42:00 -0500 + +samba (2.999+3.0.alpha23-3) unstable; urgency=low + + * Put the Samba Python modules in /usr/lib/python2.2/site-packages/, + not in /usr/lib/python2.2/lib-dynload/. + + -- Eloy A. Paris <peloy@debian.org> Wed, 9 Apr 2003 19:49:25 -0400 + +samba (2.999+3.0.alpha23-2) unstable; urgency=low + + * New package python2.2-samba that includes the Python modules + included in the Samba sources. Feedback on these modules and the new + package is welcome, as we (Debian Samba maintainers) don't use them. + (closes: #170731, #173322) + * Move libsmbclient-dev from section "devel" to "libdevel". + * Fix panic action script to give a sensible error message instead of + an empty backtrace when we don't have permission to attach to the + process. (closes: #188164) + * Fix libpam-smbpass so that it really does something. (closes: #178245) + * Apply patch to fix printing-related segfaults. (closes: #188076) + + -- Eloy A. Paris <peloy@debian.org> Sun, 6 Apr 2003 21:40:33 -0400 + +samba (2.999+3.0.alpha23-1) unstable; urgency=high + + * new upstream release, includes security fix for DSA-262 + * tweak the debconf templates to avoid references to specific + front-ends (closes: #183718) + + -- Steve Langasek <vorlon@debian.org> Sun, 9 Mar 2003 14:58:00 -0600 + +samba (2.999+3.0.alpha21-5) unstable; urgency=low + + * touch up the package descriptions a little bit (caps, punctuation) + * remove addtosmbpass, which snuck back in when we weren't looking + * reverse the position of the wins server tag, after looking more + closely at the code (closes: #183061) + * fix a glitch in the Spanish .po that rendered it invalid, plus a typo + * updated Brazilian Portuguese templates (closes: #183295) + * fix a typo in upstream manpage (s/shave/share/) (closes: #180546) + * run sed before we run sed, to deal with crazybad special chars + in the workgroup name (!) (closes: #176717) + + -- Steve Langasek <vorlon@debian.org> Sat, 1 Mar 2003 15:14:00 -0600 + +samba (2.999+3.0.alpha21-4) unstable; urgency=low + + * add scripts to samba-common to grab the netbios-name-servers options + if we're running a DHCP client (closes: #38413) + * major rearrangement of build scripts: install target now operates on + debian/tmp, not debian/samba, so we can see when new files are + added and decide where to put them; several files that should have + been in samba-common but were in samba (for the above reason) -- + smbcacls, -- have been moved, with a replaces: added. + * Fix rc script so that whitespace is consistent between inetd and + daemon modes (closes: #174677). + * smbclient -M must always connect to port 139, because port 445 + doesn't support messaging and we can't do the port 135 stuff yet + (closes: #175292, #167859). + * Import the diff from upstream CVS, which has fixed a few bugs + (closes: #178219, #177583, #181467, #181487, #181603, #175864). + Remove a few patches of ours which are now superseded. + * Add po-debconf support to the tree, for better i18n. + * Install the libsmbclient.so symlink in the libsmbclient-dev package, + per policy (closes: #181466). + + -- Steve Langasek <vorlon@debian.org> Fri, 27 Dec 2002 00:37:00 -0600 + +samba (2.999+3.0.alpha21-3) unstable; urgency=low + + * Drop --with-ldapsam from the configure options, since this no longer + means what we thought it did. Revert patch for changing the 'passdb + backend' defaults. + * Add patch from CVS HEAD to fix pdbedit segfault; postinst script + should work better now. (Closes: #173936) + + -- Steve Langasek <vorlon@debian.org> Sun, 22 Dec 2002 13:29:00 -0600 + +samba (2.999+3.0.alpha21-2) unstable; urgency=low + + * add CONFIGDIR to the set of directories exported in the install + target, so we don't try to write to /etc/ on the autobuilders. + * Reset the default 'passdb backend' value to something sensible, so + that we don't unnecessarily break upgrading systems (closes: #173731). + + -- Steve Langasek <vorlon@debian.org> Fri, 20 Dec 2002 09:13:00 -0600 + +samba (2.999+3.0.alpha21-1) unstable; urgency=low + + * new upstream release, many patches now incorporated upstream + + -- Steve Langasek <vorlon@debian.org> Mon, 16 Dec 2002 23:39:00 -0600 + +samba (2.999+3.0.alpha20-4) unstable; urgency=low + + * Remove obsolete comments about non-existant LDAP support in the + Debian Samba packages. (Closes: #165035) + * Apply patch for segfault in pam_smbpass when using the unixsam + backend. + * Drop support for nmbd in inetd, since it's not supported by + upstream and is reported to cause problems (closes: #23243, #137726, + 165037). + * Clarify example printing configs in smb.conf (closes: #168174). + * Make sure nmbd still responds to SIGTERM if it has no interfaces to + listen on (closes: #168079). + * Fix to get samba working again on 64-bit archs, after a + pointer<->int size mismatch bug. Already fixed in upstream CVS. + * Merge fix from CVS for broken libsmbclient.h references to internal + structures (closes: #162956). + * Add a default 'panic action' for Samba that will give us genuinely + useful debugging information after a crash. + * Fixed correct patch to example configurations in the libpam-smbpass + packages (closes: #169350). + * acl-dev is not in sid anymore; Build-Depend on libacl1-dev instead + (closes: #169682). + * Only ask the user for permission to edit if there's a chance of us + damaging something. + + -- Steve Langasek <vorlon@debian.org> Mon, 18 Nov 2002 19:53:00 -0500 + +samba (2.999+3.0.alpha20-3) unstable; urgency=low + + * Make sure smbstatus behavior is sane when Samba *has* been started, + as well as when it has not (closes: #164179). Thank to Robbert Kouprie + <robbert@radium.jvb.tudelft.nl> for this patch. + * Not using 'killall' in any of the maintainer scripts (the last one + remaining was winbind.logrotate.) We now just use 'kill' to send + a SIGHUP to a specific PID (which is stored in a file in + /var/run/samba.) + * Do not depend on procps because we're not using killall anymore. + + -- Eloy A. Paris <peloy@debian.org> Tue, 15 Oct 2002 22:15:57 -0400 + +samba (2.999+3.0.alpha20-2) unstable; urgency=low + + * fix an off-by-one error in smbd/lanman.c, which should shut off the + flood of log messages (closes: #157432) + * add a --config-cache option to the configure invocation, since + autoconf 2.5 doesn't load config.cache by default (closes: #163504) + + -- Steve Langasek <vorlon@debian.org> Sat, 5 Oct 2002 01:40:00 -0500 + +samba (2.999+3.0.alpha20-1) unstable; urgency=low + + * new upstream release + - non-primary groups appear to work again (closes: #161271) + * the official beginning of the upstream 3.0 branch + * exit without error from smbstatus when no connections have + been seen yet (closes: #161489) + + -- Steve Langasek <vorlon@debian.org> Wed, 2 Oct 2002 19:02:00 -0500 + +samba (2.999+3.0cvs20020906-1) unstable; urgency=low + + * CVS update + - domain authentication works again (closes: #158698) + * Factor out common code in samba-common.config + * Handle character set settings in smb.conf on upgrade + (closes: #153913, #158770) + * Don't use killall in logrotate script; there are better ways + (closes: #160076) + * Ignore value of 'hostname lookups' for hosts allow/hosts deny + (closes: #154376) + + -- Steve Langasek <vorlon@debian.org> Sat, 7 Sep 2002 11:46:00 -0500 + +samba (2.999+3.0cvs20020829-1) unstable; urgency=low + + * CVS update. + * Move the smb.conf manpage to the samba-common package (closes: #159572) + + -- Steve Langasek <vorlon@debian.org> Thu, 29 Aug 2002 17:53:25 -0500 + +samba (2.999+3.0cvs20020827-1) unstable; urgency=low + + * CVS update. (Closes: #158508) + * Part 1 of 3 of the library separation patch that Vorlon wrote has + gone upstream - removed the patch from our patches/ directory. + * Debconf note to warn users that their smb.conf will be re-written + and changed if they use Swat to maintain it. (Closes: #158479) + * Fixed typo in samba.prerm. + + -- Eloy A. Paris <peloy@debian.org> Tue, 27 Aug 2002 15:23:23 -0400 + +samba (2.999+3.0cvs20020825-2) unstable; urgency=low + + * scale back the tdbsam migration support, because of undesirable + side-effects; now always defaults to 'no'. + * strip out hyperactive library dependencies that are only needed by + smbd (closes: #155156). + * nuke any broken registry.tdb files left by previous CVS snapshots. + * support rolling back the smbpasswd->tdbsam conversion on downgrade, + since many people are likely to need to downgrade for a while. + * remove postrm handling of legacy directories, and add handling of + current ones. + + -- Steve Langasek <vorlon@debian.org> Sun, 28 Jul 2002 09:44:24 -0500 + +samba (2.999+3.0cvs20020825-1) unstable; urgency=low + + * CVS update. These packages are based on Samba 3.0alpha19 + any + code commited after 3.0alpha19 was released. + + -- Eloy A. Paris <peloy@debian.org> Sun, 25 Aug 2002 14:56:46 -0400 + +samba (2.999+3.0cvs20020723-1) unstable; urgency=medium + + * remove spurious line from samba.config + * migrate from smbpasswd to tdbsam + * re-add the pdbedit util and manpage + * compile in ldapsam support (closes: #146935) + * add PRIVATEDIR to the list of vars we override for the install + target, so Samba doesn't try to create /etc/samba (closes: #153746). + * fix makefile handling of LOGBASEDIR, so that logs always end up in + the right place (closes: 153727). + * Fixed bug in the FHS migration path that causes nmbd to read its + state from one location, but write it out to another. (closes: #154210) + * Make sure nmbd is always looking for wins.tdb in the same place. + + -- Steve Langasek <vorlon@debian.org> Fri, 19 Jul 2002 21:38:54 -0500 + +samba (2.99.cvs.20020713-1) unstable; urgency=low + + * first attempt for 3.0pre. + * only post a debconf note about moving logfiles if we're upgrading + from a version that had the logfiles in the old location + (closes: #152924). + + -- Steve Langasek <vorlon@debian.org> Sat, 13 Jul 2002 12:54:25 -0500 + +samba (2.2.5-2) unstable; urgency=low + + * No longer ship make_printerdef, which is deprecated. (closes: #63059) + * Clean up some empty directories from the samba package. + * Add call to dh_installinit for winbind rc.x symlinks (closes: #151860). + * Clean up per-package documentation lists, to reduce clutter + (closes: #147638). + * Make sure we don't ship pdbedit's man page since we are still using + smbpasswd passwords. (closes: #152208) + * move libnss_wins.so to libnss_wins.so.2, where glibc expects to find + it (closes: #148586). + * reorder postinst, so that installing samba-common from scratch loads + the debconf answers properly (closes: #151985). + * add lintian overrides for winbind, to eliminate some noise. + * rename pam_smbpass changelog to comply with policy. + + -- Steve Langasek <vorlon@debian.org> Sun, 23 Jun 2002 22:45:04 -0500 + +samba (2.2.5-1) unstable; urgency=low + + * New upstream release. + + -- Eloy A. Paris <peloy@debian.org> Sun, 9 Jun 2002 15:49:21 -0400 + +samba (2.2.4+2.2.5pre1-1) experimental; urgency=low + + * Getting ready for Samba 2.2.5. + * Remove patches/parse_spoolss.patch, now included upstream. + * Fixed thinko WRT POSIX ACL support, which we "half-enabled" in + 2.2.4-1. We don't use POSIX ACL support ourselves, so we'd + appreciate reports from those using this feature so we can + be sure this works. + * Fix the filename-matching algorithm used for smbtar's 'exclude' + functionality. (closes: #131571) + * Look for secrets.tdb in /var/lib/samba, and handle in the postinst. + This is not really a config file, because users don't edit it. + (closes: #147429) + * Doxygen fix for libsmbclient.h, thanks to Tommi Komulainen + <Tommi.Komulainen@iki.fi> for the patch. (closes: #144847) + + -- Eloy A. Paris <peloy@debian.org> Tue, 28 May 2002 11:33:51 -0400 + +samba (2.2.4-1) unstable; urgency=low + + * New upstream release (closes: #144713) + * Building with POSIX ACL support (closes: #137819) + * Include samples, exclude INSTALL from libpam-smbpass (closes: #145055) + * Compile with --with-automount, for NIS homedir support (closes: #123396) + * Add a proper 'flags' field to the mount entry we write to /etc/mtab; + fixes a display bug with mount (closes: #140397) + * Added logic to /etc/init.d/samba so a help message is printed out + when Samba is running from inetd _and_ we are not booting, i.e. the + user called the init script manually. Thanks to Francesco + Potorti <pot@gnu.org> for the suggestion on how to implement this. + (Closes: #139807, #140204) + * samba.postinst: added logic so we don't call /etc/init.d/samba if + we are running from inetd (this prevents the stupid help message + to be printed during package upgrades if we are running from inetd.) + * samba.prerm: idem. + * /etc/init.d/samba: delete stale PID files after nmbd and smbd are + stopped. This prevents start-stop-daemon from printing an ugly + error message when called from '/etc/init.d/samba stop'. I prefer + this than running start-stop-daemon with --oknodo because + start-stop-daemon might print other important error messages that with + --oknodo it would otherwise not print. (Closes: #102187, #109301) + * Patch from jerry@samba.org to fix parsing of spoolss structures. + + -- Eloy A. Paris <peloy@debian.org> Thu, 23 May 2002 23:16:52 -0400 + +samba (2.2.3a-7) unstable; urgency=medium + + * More README.debian updates. + * Neutralize the smb.conf 'lock dir' directive, which doesn't mean + what the FHS says it should, and causes us no end of grief. + (Closes: #122299) + * LPRng-handling patch so that jobs printed to recent versions of + LPRng show up properly as 'done' instead of 'paused' in the Windows + print queue. Thanks to Jaroslav Serdula <serdula_jaroslav@vse.sk> + for this patch. (Closes: #139458) + * Applied patch from Urban Widmark <urban@teststation.com> + (smbfs upstream maintainer) to add a '-n' option to smbmount + that does the same as mount's '-n'. (Closes: #139590) + * Minor tweak to unpatch-source so we unpatch sources in the + reverse order we patched them. + * Don't depend on grep in samba.prerm to determine if Samba was + running before the upgrade starts. + * Tweak the wording of debconf templates. + * Incorporate debconf translations for French, Spanish and Portuguese; + thanks to Carlos Valdivia Yagüe <valyag@hotpop.com> (es), + Andre Luis Lopes <andrelop@ig.com.br> (pt_BR), and Philippe + Batailler and Denis Barbier <barbier@debian.org> (fr). + (closes: #142657, #142659, #141551, #141699, #141682) + * Fixed symlinks in the swat package so the point to /usr/share/doc/ + instead of /usr/doc/. Added note to the description of the + swat packages that says that samba-doc must be installed for + the on-line documentation to work. Thanks to Torne Wuff + <torne@wolfpuppy.org.uk>. (Closes: #95437) + * 'dh_installinit -n' gives us no initscript handling -- we need to + handle all starting and stopping of daemons ourselves, which wasn't + happening in the {pre,post}rm scripts. + * Vary the priority of the debconf question "Do you want to generate + /etc/samba/smbpassd?" depending on whether the file already exists. + File exists -> priority 'medium', file does not exist -> priority + 'low'. Changed priorities of all other questions from 'high' to 'medium'. + + -- Steve Langasek <vorlon@debian.org> Sat, 20 Apr 2002 17:48:27 -0400 + +samba (2.2.3a-6) unstable; urgency=low + + * Call db_stop as soon as we're done with debconf in the postinst, to + avoid hanging bugs (closes: #137813) + * Ony call 'update-inetd --add' on first installation, just as we only + call 'update-inetd --remove' on package purge. + * Bring our shipped smb.conf closer in line with the upstream + defaults: don't twiddle the send/recv buffer sizes, since the Linux + kernel already provides a much better default setting + (closes: #80966, #80934, #137415, #133477) + * Added libnss_wins.so to the winbind package (closes: #137201) + * Updates to README.debian. + + -- Eloy A. Paris <peloy@debian.org> Tue, 12 Mar 2002 10:57:40 -0500 + +samba (2.2.3a-5) unstable; urgency=low + + * Having multiple workgroup lines in your smb.conf, though wacky, is + perfectly valid. Account for this in samba-common.config. + (closes: #137157) + + -- Steve Langasek <vorlon@debian.org> Sun, 10 Mar 2002 21:52:51 -0600 + +samba (2.2.3a-4) unstable; urgency=low + + * Fixed typo in samba.postinst. Cosmetic fixes there as well. + * Fix to improper usage of /usr/bin/tr in samba-common config script + (closes: #137744) + + -- Steve Langasek <vorlon@debian.org> Sat, 9 Mar 2002 14:14:02 -0500 + +samba (2.2.3a-3) unstable; urgency=medium + + * Make sure /etc/init.d/samba is executable before calling it + in the postinst. Quickly checked all other maintainer scripts + to make sure we are not calling an init script if it is not + executable. (closes: #137321) + * Fix up maintainer scripts to detect if samba was not running before + an upgrade. (closes: #33520, #130534) + * Make sure /etc/samba/ is included in the samba-common package. + Closes: #137157 + + -- Steve Langasek <vorlon@debian.org> Fri, 8 Mar 2002 11:13:21 -0500 + +samba (2.2.3a-2) unstable; urgency=low + + * merge in debconf support: + - Moved all smb.conf-related questions to samba-common (smb.conf + is part of the samba-common package, not the samba package.) + - smb.conf is not a samba-common conffile anymore since it is + being managed by debconf. It is ABSOLUTELY necessary to make + sure /etc/samba/smb.conf _NEVER_ gets overwritten by changes + made via debconf. In other words, any changes made by the user + should be honored by the debconf interface. + - samba.postinst now moves old log files from /var/log/ to + /var/log/samba/. There's a Debconf note that informs the user + the log files are stored now in a new location. + - debian/control: + + Make samba depend on debconf. + - New file debian/samba.templates. + - New file debian/samba.config. + - Re-worked debian/samba.postinst. + + Got rid of all /etc/samba/debian_config sillyness. + - remove /usr/sbin/sambaconfig; "dpkg-reconfigure samba" replaces + it. + - Removed debian/samba.prerm. + - Cleaned up /etc/init.d/samba. + + Added infrastructure for debconf. + + Got rid of all /etc/samba/debian_config sillyness. + + Got rid of /etc/samba/smbpasswd conversion stuff for + compatibility with versions of Samba < 2.0.0final-2. + (closes: #127959, #34408, #113594) + * make samba.postinst ignore the absence of /var/log/{s,n}mb*; + makes for a clean upgrade path. + * Building with MSDFS support (closes: #116793) + + -- Steve Langasek <vorlon@debian.org> Tue, 5 Mar 2002 14:14:33 -0600 + +samba (2.2.3a-1) unstable; urgency=low + + * New upstream version (closes: #135001) + * Potato builds were failing because debian/rules was not creating + debian/winbind/etc/logrotate.d/. A user having problems creating + Potato packages brought this to my attention. dh_installlogrotate + takes care of creating the directory for us, that's why we didn't + notice. + * Removed code that converts /etc/samba/smbpasswd from an ancient + format to the new format of Samba 2.0.0 and later. + Closes: #134375 - samba: postinst failed due to missing + /usr/bin/convert_smbpasswd. + * Re-organized FHS migration code in samba.postinst. Make sure we + don't fail when we move files that don't exist. + Closes: #133813 - samba: Install failed. + * Adding docs. to the libpam-smbpass package. + * Remove man pages for findsmb because we are not providing this + script. + Closes: #134181 - findsmb referenced, but not included. + * Removed replace.patch because it is now present upstream. + * Added patch from Jerry Carter to fix a problem when saving + document preferences for printing from NT clients. + * The real winbindd daemon is a forked process so we can't use + --make-pidfile when calling start-stop-daemon. Fixed + /etc/init.d/winbind to work around the issue. Thanks to + Lin Li <linl@xandros.com> for the patience and for reporting + the problems. Hopefully I got it right this time. + + -- Eloy A. Paris <peloy@debian.org> Wed, 20 Feb 2002 18:39:03 -0500 + +samba (2.2.3-6) unstable; urgency=low + + * Make sure there are actual files in /var/state/samba before trying + to move them (Closes: #133534, #133510). + * Fix up the 2.2.3 makefile so that pam_smbpass builds correctly + again. + + -- Steve Langasek <vorlon@debian.org> Tue, 12 Feb 2002 09:19:29 -0600 + +samba (2.2.3-5) unstable; urgency=low + + * Whoops, missed a spot on the samba.postinst -- will fail badly if + /var/state/samba/ no longer exists. Better get this fix into the + next upload. ;) (Closes: #133088) + * Regenerate configure only if it is older than configure.in. + * Fix smbd handling of network neighborhood lists, which was missed + in the FHS conversion (Closes: #133091) + + -- Eloy A. Paris <peloy@debian.org> Sat, 9 Feb 2002 16:37:57 -0500 + +samba (2.2.3-4) unstable; urgency=low + + * FHS cleanup; files in /var are now properly sorted according to + their nature. (Closes: #102101) + * Remove patches to source/configure, since we now call autoconf to + regenerate this file cleanly. + * lintian fixes: + - Create winbind.conffiles and add /etc/logrotate.d/winbind and + /etc/init.d/winbind to it. + - Use a relative symlink for /usr/lib/cups/backend/smb. + - Removal of a .cvsignore file in the samba-doc package. + * winbind.init fixes: + - Corrected name of the pid file (Steve) + - Make start-stop-daemon create a pid file for winbindd since it + does not create one on his own. + * #DEBHELPER# is not needed in samba.postinst because we are adding + manually everything that debhelper adds automatically. In fact, + since we are calling update-rc.d without standard paramaters I + think we can't use #DEBHELPER#. + * Fix fatal syntax error in samba.prerm. + + -- Steve Langasek <vorlon@debian.org> Thu, 7 Feb 2002 13:12:08 -0500 + +samba (2.2.3-3) unstable; urgency=low + + * work on lintian-cleanness in the package (wrong permissions, + maintainer scripts in need of debhelpering) + * /lib/security/pam_smbpass.so is now being included in the + libpam-smbpass package only, and not in both the libpam-smbpass and + samba packages (which was the case prior to 2.2.3-3.) + * Instead of making our patch scripts executable in the rules file + we run them through /bin/sh. + * New 'winbind' package that has all the winbind stuff that was in the + samba package in 2.2.3-2 and before. + * Added replace.patch: patch from Jeremy Allison to fix problems when + replacing or overwriting files in a Samba share. Patch was sent to + the samba mailing list. + + -- Eloy A. Paris <peloy@debian.org> Tue, 5 Feb 2002 21:12:48 -0500 + +samba (2.2.3-2) unstable; urgency=low + + * add support to debian/scripts/{patch-source,unpatch-source} for + automatic updating and cleaning of <version.h>. This was a request + from the Samba Team: they wanted us to clearly mark our packages + so it is always known a user is running Samba with (possibly) + Debian-specific patches. + * Change init.d killscript link to K19samba, so we stop before autofs + (closes: 117327) + * Make our patch scripts executable in the rules file -- dpkg won't do + this for us (closes: #132415). + + -- Steve Langasek <vorlon@debian.org> Mon, 4 Feb 2002 09:51:00 -0600 + +samba (2.2.3-1) unstable; urgency=low + + * New upstream release (closes: #131228). + * Restructured build system that provides DBS-like separation of + patches + * Fix typo in smbfs description (closes: #116209). + * Use killall -q in logrotate.d script, to avoid spurious cron + emails (closes: #130100). + + -- Steve Langasek <vorlon@debian.org> Sat, 2 Feb 2002 19:56:18 -0500 + +samba (2.2.2-12) unstable; urgency=high + + * (Steve) Patch for source/client/client.c. + Closes: #86438 smbclient: Transfering several GB causes the average + speed to be messed up. + * Uploading with urgency=high to expedite the move from unstable + to testing because of the security problem fixed in -11. + + -- Eloy A. Paris <peloy@debian.org> Fri, 25 Jan 2002 22:31:12 -0500 + +samba (2.2.2-11) unstable; urgency=low + + * Building with --with-libsmbclient. We have created two new + packages: libsmbclient and libsmbclient-dev. Hopefully this + will help some people that want to add the capability of + speaking SMB to their applications. + Closes: #117132 - libsmbclient support library? + * (Steve) Make swat do the right thing when reading (parsing) + the saved preferences in smb.conf. + Closes: #55617 swat mutilates the linpopup message command. + * Updated README.Debian. Updated descriptions in debian/control. + * Remembered to bump up version number in source/include/version.h + (need to automate this or else I'll keep forgetting.) + * (Steve) one liner for source/web/diagnose.c. + Closes: #106976 - smbd/nmbd not running message with swat/linuxconf. + * Added '|| true' to the post-rotate script so logrotate doesn't + fail if either nmbd or smbd is not running. + Closes: #127897 - /etc/logrotate.d/samba fails if there is no smbd process. + * Fixed incorrect file locations in swat's man page and added a + Debian-specific note to /usr/share/doc/swat/README. + Closes: #71586 swat: needs documentation fixes for debian. + * smbmount in the smbfs package does not have the setuid bit set. + Apparently, smbmount uses libsmb without checking the environment. + Thanks to Christian Jaeger <christian.jaeger@sl.ethz.ch> for + finding the local root exploit. + * Applied old patch from Jerry) Carter" <jerry@samba.org> to correct + the following two problems in Samba 2.2.2: + - %U and %G could not be used in services names + in smb.conf. + - %G would fail to be expanded in an "include = ..." + line. + + -- Eloy A. Paris <peloy@debian.org> Sat, 19 Jan 2002 21:35:26 -0500 + +samba (2.2.2-10) unstable; urgency=low + + * (Steve) Add missing manual pages. + Closes: Bug#128928: missing manpages in smbfs. + + -- Eloy A. Paris <peloy@debian.org> Sun, 13 Jan 2002 14:39:55 -0500 + +samba (2.2.2-9) unstable; urgency=low + + * (Steve) Fix broken URL's in HTML docs. + Closes: Bug#17741: bad links in html docs (at last!!!) + + -- Eloy A. Paris <peloy@debian.org> Fri, 11 Jan 2002 13:37:07 -0500 + +samba (2.2.2-8) unstable; urgency=low + + * Added "Replaces: samba (<= 2.2.2-5)" to the smbclient section in + debian/control so rpcclient.1, which was in samba-2.2.2-5, does not + cause problems now that it is part of smbclient (>= 2.2.2-6). Closes: + Closes: Bug#128684: error upgrading smbclient in sid. + + -- Eloy A. Paris <peloy@debian.org> Fri, 11 Jan 2002 11:42:40 -0500 + +samba (2.2.2-7) unstable; urgency=low + + * (Steve) Patch to make behavior honor what the docs. say about "hosts allow" + taking precedence over "hosts deny". + Closes: Bug#49249: swat: error with host deny ?! + + -- Eloy A. Paris <peloy@debian.org> Thu, 10 Jan 2002 12:36:58 -0500 + +samba (2.2.2-6) unstable; urgency=low + + * (Steve) Adds manpage for rpcclient to the proper file, + removes smbtorture from the distro because this tool isn't intended for + widespread consumption. + Closes: #63057 - no manual page for smbtorture. + * (Steve) Removed -gnu from the configure arguments (--build, --host) in + debian/rules so config.sub is able to properly create the host and target + tuples. + + -- Eloy A. Paris <peloy@debian.org> Wed, 9 Jan 2002 14:39:51 -0500 + +samba (2.2.2-5) unstable; urgency=low + + * Fixes from vorlon: + * Use /usr/bin/pager instead of more. + Closes: #125603: smbclient violates pager policy. + * Make /etc/logrotate.d/samba a conffile, send smbd and nmbd + a SIGHUP to have the log files reopened, fixes to + /etc/logrotate.d/samba. + Closes: #127897: log file rotation. + Closes: #118277: /etc/logrotate.d/samba not listed in conffiles. + * s/covert/convert/. + Closes: #121653 probable typo in install message. + + -- Eloy A. Paris <peloy@debian.org> Sun, 6 Jan 2002 03:14:58 -0500 + +samba (2.2.2-4) unstable; urgency=low + + * Applied patch from Steve to work around problem in glibc that affects the + HPPA architecure. The patch detects the error condition at configure time + and compiles without LFS support if necessary. + Closes: Bug#126763: samba completely broken on hppa. + * Including unicode_map.1251. + Closes: Bug#126719: samba-common: unicode_map.1251 missing. + * Updated smbd daemon version to match Debian package version. + Closes: Bug#127199: Package version and smbd daemon version don't match. + + -- Eloy A. Paris <peloy@debian.org> Mon, 31 Dec 2001 14:32:47 -0500 + +samba (2.2.2-3) unstable; urgency=low + + * Added some spaces in package description in debian/control. + Closes: #120730 - missing spaces in package description for nice + alignment. + * Spelling fixes. + Closes: #125328, #125329, #125330, #125367, #125365, #125403. + * Steve Langasek <vorlon@debian.org> is the co-maintainer of the Debian + Samba packages!!! Added him to the uploaders field in debian/control. + + -- Eloy A. Paris <peloy@debian.org> Tue, 18 Dec 2001 00:54:25 -0500 + +samba (2.2.2-2) unstable; urgency=low + + * Backed out changes to source/filename.c per Andrew Tridgell's request. + This changes were introduced in 2.2.1a-7 as an attempt to fix #47493. + Tridge found out that they break smbd. + * Changed version number in source/includes/version.h so it is clear that + this is a version of Samba packaged for Debian. This is another request from + Tridge and will help the Samba Team to get bogus bug reports. + * Added Samba-HOWTO-Collection.pdf and other README files to the + /usr/share/doc/<package>/ directories. + * Installing libnss_winbind.so and pam_winbind.so. + Closes: #116790: nss and pam modules for winbind missing. + * Removed user-emacs-settings from changelog. + + -- Eloy A. Paris <peloy@debian.org> Mon, 29 Oct 2001 19:16:26 -0500 + +samba (2.2.2-1) unstable; urgency=low + + * New upstream version. + * Temporary fix for #113763 (Steve Langasek) + * Quick hack to avoid smbmount reveal password length. Please note + that even with this hack there is a small window when password is + completely visible with 'ps aux'. There are other methods that should + be used to automate mounting of SMB shares. + Closes: #112195: smbmount-2.2.x reveals password length. + * Applied patch from Steve Langasek <vorlon@debian.org> to prevent + forcing use of setresuid() in Sparc. + Closes: #112779: samba build forces use of setresuid, which causes + smbd to fail on Sparc. + + -- Eloy A. Paris <peloy@debian.org> Mon, 15 Oct 2001 10:26:10 -0400 + +samba (2.2.1a-9) unstable; urgency=low + + * Replaced $(LD) with $(CC) all the way through source/Makefile. + Closes: #111036: ld shouldn't be used to link shlibs. + * s/\/bin\/mail/\/usr\/bin\/mail/ in smb.conf's man page (HTML and + sgml as well.) + Closes: #110963: smb.conf: mail should be /usr/bin/mail. + * Documented better smbclient's -W behavior. Patch from Steve + Langasek. + Closes: #53672: smbclient: -W flag is interpreted as domain, not + workgroup. + + -- Eloy A. Paris <peloy@debian.org> Tue, 4 Sep 2001 23:10:41 -0400 + +samba (2.2.1a-8) unstable; urgency=low + + * Set some reasonable default perms for the samba logdir (again, + thanks to vorlon :-) + Closes: #72529: insecure permissions on log files. + + -- Eloy A. Paris <peloy@debian.org> Sun, 26 Aug 2001 15:40:47 -0400 + +samba (2.2.1a-7) unstable; urgency=low + + * Another attempt at fixing #47493. Patch from Steve Langasek + <vorlon@netexpress.net>. Let's keep our fingers crossed Steve! + + -- Eloy A. Paris <peloy@debian.org> Sun, 26 Aug 2001 13:37:06 -0400 + +samba (2.2.1a-6) unstable; urgency=low + + * Backed out fix to #47493 introduced in 2.2.1a-4 as it is causing + smbd to die with signal 11 under some unidentified situations. + Closes: #109774: Latest debian version breaks printer driver download. + Closes: #109946: not all files appear in samba-exported directories. + * Another patch from Steve Langasek. This one adds quotes around + printer names for print systems it's reasonable for Debian to + support. Together with the patch in #29957 (see changelog for + 2.2.1a-4), this should take care of the problems with multi-word + printer names in Samba. + + -- Eloy A. Paris <peloy@debian.org> Fri, 24 Aug 2001 21:12:27 -0400 + +samba (2.2.1a-5) unstable; urgency=low + + * Important changes that affect how Samba is built on Debian + machines are implemented in this release. All of this changes + were suggested by the energetic Steve Langasek <vorlon@debian.org>, + and his arguments were so sound and reasonable that I decided + to implement them. Here's Steve's original changelog: + + * Fix up the build system to avoid needing to run configure + as root to answer questions we already know the answers to. + * In the process, make surprising progress towards being able to + cross-compile the samba packages. + + -- Eloy A. Paris <peloy@debian.org> Fri, 24 Aug 2001 01:08:06 -0400 + +samba (2.2.1a-4) unstable; urgency=low + + * Fixed typo in smbmount's mount page. + Closes: #109317: smbfs: mistype in smbmount manpage. + * Included symlink to smbspool to better support CUPS printing. + Closes: #109509: include symlink for cups samba support. + * Applied patch from Steve Langasek <vorlon@netexpress.net> to + fix bug #29957. + Closes: #29957: samba strips trailing " from strings in smb.conf. + * First attempt at fixing #47493. Another patch from Steve "I want + a bug-free Samba" Langasek. + Closes: #47493: Samba doesn't handle ':' in dir names right. + + -- Eloy A. Paris <peloy@debian.org> Tue, 21 Aug 2001 23:26:38 -0400 + +samba (2.2.1a-3) unstable; urgency=low + + * Steve Langasek <vorlon@netexpress.net> has been hard at work in + the last few days looking at the long list of open bugs filed + against the Samba packages. I don't know how to thank him. It's been + a pleasure working with Steve, and all the fixes, patches, etc. in + this release come from him. The bug list is greatly reduced thanks + to Steve's efforts. + * Steve's additions/modifications/patches/etc. are: + - New package that (libpam-smbpass) provides pam_smbpass. Before, this + was provided in another package but now the sources are part of + the Samba sources so we can start providing it from here. + Closes: #107043 - pam_smbpass now present in Samba source, + should be built from there + - Patch to source/smbd/service.c that allows admins to call + /bin/umount from the root postexec of a Samba share. + Closes: #40561 - samba pre/postexec commands do not work. + - Clear TMPDIR before starting smbd in /etc/init.d/samba. + Closes: #51295 - Problems with Samba and TMPDIR. + - Correction to documentation of "guest only". + Closes #38282 - "guest only" share still requires a password. + * Applied patch from Santiago Vila <sanvila@unex.es> to convert + /usr/sbin/mksmbpasswd from a shell script into a real awk script. + Sorry it took so long, Santiago; I hadn't realized you even + provided a patch :-) + Closes: #77891 - mksmbpasswd could be a real awk script. + * Updated description of the smbfs and smbclient packages. Also have + each package recommend the other. + Closes: #108650: Should suggest or recommend smbfs. + + -- Eloy A. Paris <peloy@debian.org> Mon, 13 Aug 2001 22:21:55 -0400 + +samba (2.2.1a-2) unstable; urgency=low + + * Build-depends: depend on debhelper (>=2.0.103). + Closes: #105795: Build-Depends are wrong. + * Run samba's preinst and postinst scripts without -e so failed commands + do not abort installation. + Closes: #106384: postinstall crashes abnormally. (And really closes + #104471.) + + -- Eloy A. Paris <peloy@debian.org> Thu, 26 Jul 2001 00:30:37 -0400 + +samba (2.2.1a-1) unstable; urgency=low + + * New upstream version. + * Make sure samba's postinst script exits with a zero status. + Closes: #104471: Samba postinst problem. + + -- Eloy A. Paris <peloy@debian.org> Thu, 12 Jul 2001 21:55:21 -0400 + +samba (2.2.1-1) unstable; urgency=low + + * New upstream version. + Closes: #103339: config.guess and config.sub update required. + Closes: #98518: Samba 2.2 can't act as PDC for NT4/W2K due to + incompatibility with PAM. + Closes: #97447: nmbd crashes due to bugs in DAVE 2.5.2. + Closes: #95777: Samba 2.2 is unable to join or authenticate against + Samba 2.2 PDC domain. + Closes: #68842: samba should use PAM for password changing (I + haven't personally tried this one, but it's been + advertised this works.) + Closes: #102506: PAM account checking fails. + Closes: #102518: Complains about unknown paramter "obey pam + restrictions" + Closes: #94774: Build failure on PARISC machines. + * Moved away from /etc/cron.weekly/samba for log file rotation. + Now using logrotate. + Closes: #95548: typo in /etc/cron.weekly/samba. + Closes: #74951: nmbd does not rename its log file. + * Removed Debian-specific addtosmbpass.8 man page since this script + is not longer provided upstream. Users should use the smbpasswd + program instead. + * Updated sample /etc/samba/smb.conf to reflect the recent changes + affecting handling of PAM authentication. Also updated + /etc/pam.d/samba. + + -- Eloy A. Paris <peloy@debian.org> Wed, 11 Jul 2001 00:44:14 -0400 + +samba (2.2.0.final.a-1) unstable; urgency=high + + * New upstream version (contains security fix from DSA-065-1.) + Closes: #97241: samba 2.2.0 fails to process hostnames in + "hosts allow" config line. + * Removed Debian-specific addtosmbpass.8 man page since this script + is not longer provided upstream. Users should use the smbpasswd + program instead. + Closes: #98365: addtosmbpass is missing from 2.2.0.final-2. + * Updated sample /etc/samba/smb.conf to reflect the recent changes + affecting handling of PAM authentication. Also updated + /etc/pam.d/samba. + + -- Eloy A. Paris <peloy@debian.org> Sun, 24 Jun 2001 11:11:59 -0400 + +samba (2.2.0.final-2) unstable; urgency=low + + * Added libcupsys2-dev to Build-Depends. + * Samba depends now (again) on netbase so update-inetd is always + available for the Samba maintainer scripts. + Closes: #86063: Fails to uninstall if inetd is not installed. + * Updated source/config.{sub,guess} so ARM built doesn't fail. + Closes: #94480: config.sub out of date; can't build on arm. + Closes: #85801: config.sub/guess out of date. + * Not using brace expansion, i.e. {foo,bar} in any of the maintainers + scripts nor in debian/rules. + Closes: #88007: samba postrm has is not POSIX sh compliant. + + -- Eloy A. Paris <peloy@debian.org> Sat, 21 Apr 2001 17:27:18 -0400 + +samba (2.2.0.final-1) unstable; urgency=low + + * New upstream release. Lots of new things. See WHATSNEW.txt. + * Goofy version number because of my stupidity when assigning version + numbers to the CVS packages I have been uploading to experimental. + Will be fixed when 2.2.1 is released. I've no doubts a 2.2.1 release + will follow soon. + + -- Eloy A. Paris <peloy@debian.org> Tue, 17 Apr 2001 22:58:14 -0400 + +samba (2.2.0.cvs20010416-1) experimental; urgency=low + + * CVS update. + + -- Eloy A. Paris <peloy@debian.org> Mon, 16 Apr 2001 21:25:15 -0400 + +samba (2.2.0.cvs20010410-1) experimental; urgency=low + + * CVS update. + * Added libreadline4-dev to Build-Depends. + + -- Eloy A. Paris <peloy@debian.org> Tue, 10 Apr 2001 16:53:45 -0400 + +samba (2.2.0.cvs20010407-1) experimental; urgency=low + + * CVS update. Includes what is in 2.2.0alpha3. + + -- Eloy A. Paris <peloy@debian.org> Sat, 7 Apr 2001 16:00:33 -0400 + +samba (2.2.0.cvs20010316-1) experimental; urgency=low + + * Started working on Samba 2.2.0. Using the SAMBA_2_2_0 branch + from Samba CVS. + * Not compiling rpctorture as it has compile errors. Change in + debian/rules. + * Removed Linux kernel 2.0.x and smbfs compatibility baggage. Now + the smbfs does not support 2.0.x kernels; a kernel > 2.2.x is + needed to use smbfs. Updated debian/control, debian/rules and + README.Debian to reflect this change. + * Added to swat a versioned dependency on samba (so a user is forced to + install a new version of swat each time a new version of samba is + installed.) + + -- Eloy A. Paris <peloy@debian.org> Sun, 18 Mar 2001 14:21:14 -0500 + +samba (2.0.7-5) unstable; urgency=medium + + * Transition from suidmanager to dpkg-statoverride. + + -- Eloy A. Paris <peloy@debian.org> Thu, 18 Jan 2001 23:51:56 -0500 + +samba (2.0.7-4) unstable; urgency=medium + + * Applied Urban Widmark <urban@teststation.com> fixes to smbmount. Urban + is the maintainer of the smbfs in the kernel and of the userland + utilities. + * Links to HTML documents are correct now. + Closes: #69439: swat: Broken help file symlinks + Closes: #72615: samba-doc directory changed: removed htmldocs from path + Closes: #75847: swat: Wrong symlink + Closes: #66857: Wrong links to html documents. + Closes: #77912: misplaced documentation symlinks for swat + * Building Samba with CUPS support. For this I reverted the change to + source/configure.in that I did in 2.0.7-3 and re-ran autoconf. + Closes: #59038: samba: not compiled with cups support. + * Fix against previous known/unknown user time difference patch to swat + (make username / password lookups take the same time.) Remove CGI + logging code in Swat. + Closes: #76341 - Security holes in swat + * Updated Build-depends. + * Updated debian/copyright to refer to the correct location of the GPL. + * debian/rules: changed DESTDIR to `pwd`/debian/samba (was + `pwd`/debian/tmp.) + * debian/rules: added '--sourcedir=debian/samba' to dh_movefiles (for some + strange reason dh_installdirs is not creating debian/tmp/ so I needed + to tweak everything to install stuff in debian/samba rather than in + debian/tmp.) + * debian/control: changed section of samba-docs to 'doc' (was 'docs') + * Using relative symlinks in /usr/share/samba/swat/ (changed debian/rules + and source/scripts/installswat.sh.) + * Fixed (by tweaking debian/rules) + /usr/bin/{smbmnt,smbumount-2.*,smbmount-2.*} to be suid. + * Added "Provides: samba-client" to smbclient's section in control. + Closes: #71143: smbclient: Smbclient should provide samba-client. + * Fix for desired_access being zero in map_share_mode() (patch to + source/smbd/nttrans.c.) Thanks to Gary Wilson + <wilsong@sergievsky.cpmc.columbia.edu> for bringing this patch to my + attention. + * Hacked source/lib/util_sec.c so smbd works fine in both 2.0.x and + 2.2.x kernels even when the build is done in a system running + a 2.2.x kernel. + Closes: #78858: samba-common: samba2.0.7 needs kernel 2.2.x but + doesnt depend on it. + Closes: #72758: README.Debian should comment on 2.0.x kernels. + Closes: #56935: Samba 2.0.6 and Kernel 2.0.x. + Closes: #58126: Samba 2.0.6 and Kernel 2.0.x -- more info. + Closes: #60580: samba: failed to set gid. + Closes: #64280: Samba panics, can't set gid. + Closes: #66816: Must deal with brokenness under 2.0.x. + Closes: #67682: potatoe samba 2.0.7-3 out of order, 2.0.5a-1 OK. + Closes: #69735: PANIC: failed to set gid + Closes: #66122: "smbclient -L localhost -U%" returns with "tree + connect failed: code 0". + Closes: #57637: Samba says tree connect error. + Closes: #58015: potato samba wins support is broken. + * Fixed comments in sample smb.conf to point to the correct location. + Closes: #69578: comments in smb.conf points to wrong path. + * Move codepages from /etc/samba/codepages/ to + /usr/share/samba/codepages/. + Closes: #63813: samba; codepages should go in /usr/lib. + * Moved /var/samba/ to /var/state/samba/. + Closes: #49011: samba package not FHS compliant. + * Hacked source/configure.in (and re-ran autoconf) so yp_get_default_domain() + is found. + Closes: #44558: netgroup support missing in samba 2.0.5a-1. + * /etc/init.d/samba was calling start-stop-daemon with both --pidfile and + --exec. Got rid of --exec so --pidfile works. + + -- Eloy A. Paris <peloy@debian.org> Thu, 11 Jan 2001 00:15:57 -0500 + +samba (2.0.7-3) frozen unstable; urgency=high + + * Release manager: this closes a RC bug. + * Commented out the section in source/configure.in that auto-detects + CUPS support and then ran autoconf to generate a new configure + script. This was done to prevent machines that have libcupsys-dev + installed from detecting CUPS support and adding an unwanted + dependency on libcupsys. This way the whole printing system + won't break on upgrades. CUPS support should be added after + Potato is released. + Closes: #65185: samba-common: Upgrading removes printing system. + Closes: #64496: smbfs: smbfs on powerpc has a dependency on cupsys. + * Updated README.debian. + Closes: #64594: Old README.Debian in /usr/share/doc/samba. + + -- Eloy A. Paris <peloy@debian.org> Tue, 20 Jun 2000 19:16:04 -0400 + +samba (2.0.7-2) frozen unstable; urgency=high + + * Release manager: this closes RC bug #63839 that prevents Samba + to be built from source. + * Fixed a stupid typo in debian/rules that was preventing Samba + to be built from source. + Closes: #63839: samba_2.0.7-1(frozen): build error (SAMBABOOK dir) + * I forgot to mention that O'Reilly's book "Using Samba" was donated + to the Open Source community. The book was included in Samba 2.0.7 + in HTML format and is part of the Debian Samba package since + Samba 2.0.7-1. + * In Samba 2.0.7-1, the "Using Samba" book and a number of HTML help + files were supposed to be provided in both the swat and the samba-doc + packages. This duplication was a waste of space. Starting with + Samba 2.0.7-2, swat recommends samba-doc and the book and the HTML + files are included only in samba-doc, and are accessed via symlinks + from within swat. + Closes: #58810: superfluous files in swat? + * Added a 'echo "."' to /etc/init.d/samba in the reload) section. + Closes: #63394: "echo ." missing in reload section of init.d script + * Fixed typo in docs/htmldocs/using_samba/ch06_05.html. + Closes: #64344: typo "encrypted passwords" + * Cleaned up samba's postrm script so important common files aren't + deleted when samba is purged. Created a samba-common.postrm script. + Closes: #62675: purging samba removes /etc/samba/smb.conf. + Closes: #63386: samba --purge removes /etc/samba dir even though + smbclient/smbfs/samba-common packages are still installed + + -- Eloy A. Paris <peloy@debian.org> Wed, 3 May 2000 02:42:07 -0400 + +samba (2.0.7-1) frozen unstable; urgency=low + + * New upstream version. Dear Release Manager: please allow this + package to go to frozen as it contains fixes to a _lot_ of problems. + You can take a look at all the problems fixed by this release in + the official upstream announcement at + http://us1.samba.org/samba/whatsnew/samba-2.0.7.html. + * Added --with-utmp to add utmp support to smbd (this is new in Samba + 2.0.7) + * Closes: #62148 - samba not rotating filled logs. + * Closes: #56711: Samba doesn't manage well long share name (please note + that it's possible to connect to shares with names longer than + 14 characters but the share will be listed with a name truncated to + 13 characters.) + * Closes: #51752 - NT DOMAIN - NET USE * /HOME not mapping (error 67). + Closes: #50907 - logon path not working. + This is not a bug, it's just Samba doing the same thing an NT server + does. See WHATSNEW.txt and smb.conf's man page for details. + * Closes: #48497 - error executing smbsh in debian-potato. (smbwrapper + is not supported anymore.) + * Closes: #58994 swat: typo in swat description. + * Closes: #45931 - Samba dies with SIGILL on startup. (Hardware + problems, person that reported the bug never came back.) + Closes: #54398 - smbadduser fails, looks for ypcat. + * Fixed swat's man page to include Debian specific installation + instructions. There's not necessary to edit /etc/services or + /etc/inetd.conf. + (Closes: #58616 - incomplete install config && incorrect installation + instructions.) + * s/SBINDIR/\"/usr/sbin\"/g in source/web/startstop.c to prevent swat + to look for smbd and nmbd in the wrong place when requested to start or + stop smbd or nmbd. + (Closes: #55028 - swat can't start samba servers.) + * Closes: #37274: smbclient does not honour pot. (Tested and seems to be + working now.) + * Not confirmed, but should fix #56699, #62185, #56247, #52218, #43492, + #50479, #39818, #54383, #59411. + (please re-open any of this if the problem still exists - I was unable + to confirm any of this because I could never reproduce them.) + Closes: #56699 - Samba's nmbd causes random kernel oops several + times in a row. + Closes: #62185 - nmbd's forking until no more file descriptors are + available. + Closes: #56247 - session setup failed: ERRSRV - ERRbadpw. + Closes: #52218 - Either wins proxy does not work, or I don't understand + it. + Closes: #43492 - intermittent problem changing password. + Closes: #50479 - Can't access windows 2000 shares with samba. + Closes: #39818 - samba-common: Upgrading Samba from the Slink version. + Closes: #54383 - samba-common: Missing /etc/smb.conf. + Closes: #59411 - smbclient: cannot browse Win2k shares. + + -- Eloy A. Paris <peloy@debian.org> Thu, 27 Apr 2000 16:07:45 -0400 + +samba (2.0.6-5) frozen unstable; urgency=low + + * Oppsss! samba-common doesn't depend on libcupsys1 so the binaries + in this package are broken unless libcupsys1 is installed. + samba-common has a "grave" bug because of this. Instead of adding + libcupsys1 to the Depends: list of each package in debian/control + I investigated why dh_shlibs was not picking the dependency + automatically. It turns out that it's probably a bug in libcupsys1 + because the format of its shlibs file is not correct. I fixed that + file (/var/lib/dpkg/info/libcupsys1.shlibs) and now dependencies are + picked correctly. I'll talk to the libcupsys1 maintainer. + + I think the addition of CUPS support to Samba is a big change that + should not go into Frozen. So, I decided to back up the addition + of CUPS support I did in 2.0.6-4 to minimize problems. I'll add + CUPS support again when I start working on Samba for Woody. + (Closes: #59337 - samba-common has a missing dependency) + + -- Eloy A. Paris <peloy@debian.org> Wed, 1 Mar 2000 08:40:02 -0500 + +samba (2.0.6-4) frozen unstable; urgency=low + + * It seems that sometimes nmbd or smbd are not killed when upgrading. + I think it is because in samba's prerm script I was calling + start-stop-daemon with the --pidfile switch and in old versions of + Samba the nmbd and smbd daemons did not store their PIDs in a file in + /var/samba/. I changed debian/samba.prerm so the existence of the + PID files is checked before calling "start-stop-daemon --pidfile ..." + If the PID files do not exist then start-stop-daemon is called + without the --pidfile parameter. + (Closes: #58058 - upgrade from slink went badly) + * Fixed typo in description of swat package in debian/control. + * Installed libcupsys1-dev so the configure script picks up CUPS + and Samba is compiled with CUPS support. Also added libcupsys1 to + the Depends: list of package samba in debian/control. + (Closes: #59038 - samba not compiled with cups support) + * Added a small paragraph to debian/README.debian warning about possible + problems with the WINS code in Samba 2.0.6. + + -- Eloy A. Paris <peloy@debian.org> Mon, 28 Feb 2000 14:00:42 -0500 + +samba (2.0.6-3) frozen unstable; urgency=low + + * Applied patch posted by Jeremy Allison to the samba mailing list + that should take care of the internal errors reported in bug #52698 + (release-critical). Wichert: please test as I never could reproduce + it here. + (Closes: #52698 - samba gets interbal errors) + * Moved samba-docs to the 'docs' section. + (Closes: #51077 - samba-doc: wrong section) + * Added reload capability to /etc/init.d/samba (only for smbd because + nmbd does not support reloading after receiving a signal). + (Closes: #50954 - patch to add reload support to /etc/init.d/samba) + * Corrected "passwd chat" parameter in sample /etc/samba/smb.conf so + Unix password syncronization works with the passwd program currently + in Potato. Thanks to Augustin Luton <aluton@hybrigenics.fr> for + the correct chat script. + * Stole source/lib/util_sec.c from the CVS tree of what will become + Samba 2.0.7 or whatever so we can use the same binaries under + both 2.0.x and 2.2.x kernels. + (Closes: #51331 - PANIC: failed to set gid) + * smbadduser is now provided as an example and it's customized for Debian. + I am not providing this script in /usr/sbin/ because then I would need + a dependency on csh, something that I don't want to do. + (Closes: #51697, #54052) + * Fixed the short description of the smbfs package in debian/control. + (Closes: 53534 - one-line description out of date). + + -- Eloy A. Paris <peloy@debian.org> Tue, 23 Nov 1999 16:32:12 -0500 + +samba (2.0.6-2) unstable; urgency=low + + * samba-common now depends on libpam-modules (not on libpam-pwdb, which + I have been told is obsolete). I modified /etc/pam.d/samba accordingly + to reflect the change. + (Closes: Bug#50722: pam pwdb dependence?). + * The old /etc/pam.d/samba file which had references to pam_pwdb caused + smbd to die with a signal 11. The new /etc/pam.d/samba file fixes + this problem. + (Closes: #50876, #50838, #50698) + * Compiled with syslog support (use at your own risk: syslog support + is still experimental in Samba). I added the parameters "syslog = 0" + and "syslog only = no" to the sample smb.conf to avoid pestering + users that do not want Samba to log through syslog. + (Closes: Bug#50703 - syslog only option doesn't work) + * Removed the stupid code in the smbmount wrapper script that tries + to load the smbfs module if smbfs is not listed in /proc/filesystems. + (Closes: Bug#50759 - Non-root can't run smbmount if SMBFS is compiled + as a module in the kernel) + * Added /bin/mount.smb as a symlink pointing to /usr/bin/smbmount so + 'mount -t smb ...' works just as 'mount -t smbfs ...'. + (Closes: Bug#50763 - 'mount -t smb' doesn't work) + + -- Eloy A. Paris <peloy@debian.org> Sat, 20 Nov 1999 18:53:35 -0500 + +samba (2.0.6-1) unstable; urgency=low + + * Samba 2.0.6 has been released. This is the first try of the Debian + Samba packages. I know for sure that smbd won't work properly on + 2.0.x kernels because the patch that Wichert sent me does not apply + to the new source/lib/util_sec.c in Samba 2.0.6. That file was + completely re-written by Tridge. + * Updated README.Debian. + * A new client utility called smbspool appeared in Samba 2.0.6. I added + this utility to the smbclient package, although I haven't tried it yet. + * Added the symlink /sbin/mount.smbfs that points to /usr/bin/smbmount. + This is to be able to type "mouont -t smbfs ...". This symlink goes + in the smbfs package, of course. + * This new release should close the following bugs (some of these + are fixed for sure in this new upstream release, some others I could + not reproduce but I believe they are fixed if they were real bugs. + As always, please feel free to re-open the bugs if the problem is not + solved). + Closes: Bug#33240: icmp mask needs a bug workaround. + Closes: Bug#37692: samba: Has problems detecting interfaces. + Closes: Bug#38988: samba: Truly bizzare behavour from nmbd. + Closes: Bug#46432: samba-2.0.5a-2: nmbd does not appear to broadcast + properly. + Closes: Bug#44131: smbfs: no longer possible to set file and + directory-modes. + Closes: Bug#46992: smbmount-2.2.x manpage wrong. + Closes: Bug#42335: smbfs: missing options from the new 2.2.x commandline. + Closes: Bug#46605: smbmnt segfaults. + Closes: Bug#48186: smbmount. + Closes: Bug#38040: smbfs: Please add /sbin/mount.smb [included]. + Closes: Bug#47332: smbmount: could -f and -P be added back? + * Samba has been compiled with PAM support (closes: Bug#39512 - samba PAM + module). To succesfully add PAM support, I created /etc/pam.d/samba and + added this file as a conffile for the samba-common package. I also made + samba-common depend on libpam-pwdb. + * Added simple man pages for the wrapper scripts smbmount and smbmount. + (Closes: Bug#44705 - Missing smbmount man page) + * Installed libreadlineg2-dev in my system so smbclient now has a + "history" command and libreadline support :-) + * This time I did add a check to the smbmount wrapper script to see if + the kernel has support for smbfs, as suggested by Jeroen Schaap + <J.Schaap@physiology.medfac.leidenuniv.nl>. I mentioned in the changelog + for samba-2.0.5a-3 that I did this but I forgot at the end. + + -- Eloy A. Paris <peloy@debian.org> Thu, 11 Nov 1999 12:08:15 -0500 + +samba (2.0.5a-5) unstable; urgency=low + + * I am sorry to report that the smbwrapper package is gone for the + moment. The reason for this is twofold: first of all, smbwrapper + is completely broken in Samba-2.0.5a (it compiles but it doesn't + run) and in the upcoming Samba-2.0.6 it doesn't even compile. Second, + when I asked Andrew Tridgell (father of Samba) about the state of + smbwrapper he told me that Ulrich Drepper (head of the glibc project) + broke on purpose the glibc stuff in which smbwrapper is based. + Consequently, Tridge recommended me to compile Samba without + support for smbwrapper. When, I have no idea. Sorry folks. Here is + the original message I received from Andrew: + + > 1) 2.0.5a's smbwrapper doesn't work under glibc2.1, and pre-2.0.6's + > smbwrapper doesn't even compile under glibc2.1. + + yep, Ulrich deliberately broke it. It won't get fixed till glibc + allows the sorts of games it plays to work again. I suggest you turn + it off in your build scripts until that gets sorted out. + + * Swat's file are now in /usr/share/samba/ instead of + /usr/lib/samba/ (bug #49011). + * Man pages now in /usr/share/man/ instead of /usr/man/ (bug #49011). + + -- Eloy A. Paris <peloy@debian.org> Tue, 2 Nov 1999 12:59:13 -0500 + +samba (2.0.5a-4) unstable; urgency=low + + * Applied patch from our fearless leader (Wichert) to fix the darn bug + that prevents Samba to work on 2.0.x kernels if it was compiled + in a system running a 2.2.x kernel. This closes #40645 (build uses + setresuid which doesn't work under 2.0.34 (does apparently under + 2.2.x) ). + * Fixed the entry that swat's postinst script adds to /etc/inetd.conf + so it is '#<off># swat\t\tstream\ttcp\tnowait.400 ...' instead of + '#<off>#swat\t\tstream\ttcp\tnowait.400 ...'. The old way caused + 'update-inetd --enable swat' to leave the entry for swat disabled. + Thanks to Dave Burchell <burchell@inetnebr.com> for finding out + this problem. This closes #48762 (swat uses non-standard syntax to + comment out inetd.conf entry). + * /usr/sbin/swat does not think anymore that the smbd daemon lives + in /usr/local/samba/bin/. To fix this I am running now source/configure + with "--prefix=/usr --exec-prefix=/usr". This closes #47716 (samba + 'swat' fails: incorrect hardwired path in the binary). + + -- Eloy A. Paris <peloy@debian.org> Sun, 31 Oct 1999 03:42:38 -0500 + +samba (2.0.5a-3) unstable; urgency=low + + * I am pretty darn busy with my MBA, I apologize for the long time it's + taking to squash bugs in the Samba packages. + * Built with debhelper v2 for FHS compliancy. Changed a couple of + things in debian/rules to accomodate for the new place for the docs. + I also had to change debian/{samba.postinst,samba.prerm,swat.postinst} + to make sure that the symlink from /usr/doc/xxx exists and points to + /usr/share/doc/xxx (the reason for this is that I am not letting + debhelper to create these scripts for me automatically). + * Built with latest libc6. + * smbfs: finally, the nasty bug that causes smbmount to die after + a while is gone thanks to Ben Tilly <Ben_Tilly@trepp.com>. + The problem was just a typo in source/client/smbmount.c. + This closes grave bug #42764 (smbmount dies) and #43341 + (smbfs-2.2.x won't function after a while). + * Fixed the smbmount wrapper script to eliminate a bashism (closes + #45202 - "wrapper scripts use $* instead of "$@") and to recognize + 2.3.x and 2.4.x kernels (closes #47688 - "smbfs: does not recognize + kernel 2.3.x"). + * Added a check to the smbmount wrapper script to see if the + kernel has support for smbfs, as suggested by Jeroen Schaap + <J.Schaap@physiology.medfac.leidenuniv.nl>. + * swat's man page is now part of the swat package, not of the samba + package. This closes #44808 (Samba has a man page for swat, but + the binary is not included). + * The interface program smbrun is not longer needed by smbd because + of the availability of execl() under Linux. Because of this, the + smbrun is not even being compiled. Since there is no need for smbrun + now, the smbrun man page was taken out of the samba package. This + closes #45266 (/usr/bin/smbrun missing). + * smbpasswd is now part of the samba-common package, and not part of + the samba package. This is to let administrators that do not want + to install a full Samba server administer passwords in remote + machines. This closes bug #42624 (smbpasswd should be included in + smbclient). This bug report also suggests that swat becomes part of + the samba package, that smbfs becomes part of the smbclient package, + and that the binary smbpasswd becomes part of the smbclient package. + I moved smbpasswd to the samba-common package but I am reluctant to + do the other things the bug report suggests. + * In order to keep dpkg happy when moving smbpasswd from the samba + package to samba-common, I had to add a "Replaces: samba (<= 2.0.5a-2)" + in the control section of the samba-common package and a + "Replaces: samba-common (<= 2.0.5a-2)" in the control section of the + samba package (in debian.control). + * Samba is now being compiled with the "--with-netatalk" option. This + closes #47480 (Could samba be compiled with the --with-netatalk option). + * All packages that depend on samba-common have a versioned dependency + now. This was accomplished by adding "(= ${Source-Version})" to the + relevant sections of debian/control. Thanks t Antti-Juhani Kaijanaho + <gaia@iki.fi> for the hint. This closes #42985 (samba should probably + have a versioned depends on samba-common). + * Made sure the file docs/textdocs/DIAGNOSIS.txt gets installed in all + the Samba packages. This closes bug #42049 (no DIAGNOSTICS.txt file). + * Added the smbadduser helper script to the samba package. This closes + #44480 (Samba doesn't come with the smbadduser program). + * Applied patch from szasz@triton.sch.bme.hu that prevents smbmount + to leave an entry in /etc/mtab for a share that could not be mounted + because of invalid user of password. The patch also allows smbumount + to unmount the share in the event that something goes wrong with the + smbmount process. This closes bug #48613 (Mount/umount problems + + patch) as well as #44130 (failed mount is still mounted). + * smbmount-2.2.x is now setuid root. This is needed for the patch + applied above to be effective. If smbmount-2.2.x is not setuid root + then an entry will be left in /etc/mtab even when the mount + fails. I had to add "usr/bin/smbmount-2.2.x" to debian/smbfs.suid + for this to work. + + -- Eloy A. Paris <peloy@debian.org> Wed, 27 Oct 1999 10:36:13 -0400 + +samba (2.0.5a-2) unstable; urgency=low + + * This version is basically the same as 2.0.5a-1 but it was compiled + on a Potato system with glibc2.1. See below the change log for 2.0.5a-1 + for more information. + + -- Eloy A. Paris <peloy@debian.org> Tue, 27 Jul 1999 02:25:29 -0400 + +samba (2.0.5a-1) stable; urgency=high + + * I'm back from the Honey Moon. We are pretty busy because we are moving + to Pittsburgh (from Caracas, Venezuela) in aprox. 24 hours and we still + have plenty of things to pack and to do. Samba 2.0.5 was released + while I was in the Honey Moon and it is just now (almost 3 AM) when + I have time to package it. + * Because of the security problems fixed in 2.0.5, this upload goes + to both stable and unstable (the Security Team asked for this). + * This release (2.0.5a-1) was compiled on a Slink system. 2.0.5a-2 will + be compiled on a Potato system. + * Added a "Replaces: samba (<= 1.9.18p10-7)" to the samba-common + section in debian/control (as suggested by Steve Haslam + <araqnid@debian.org>) to fix the problems that appear when upgrading + from the Samba package in Slink. Please test this as I am completely + unable to do so. This should fix bug #39818 (Upgrading Samba from the + Slink version). + * Removed the hacks to the autoconf stuff that I added to 2.0.4b-2 in + order to have defined several socket options when compiling with + Linux 2.2.x kernel headers - the fix is now upstream. + * Finally!!! smbmount was re-written (thanks Tridge :-) to use a command + line syntax similar to the one used by the old smbmount (for 2.0.x + kernels). This means that the wrapper script is no longer necessary + so I removed it. In its place there is a simple wrapper script that + calls smbmount-2.0.x or smbmount-2.2.x depending on the kernel that is + running. + * Because of the wedding, the Honey Moon, and our move to Pittsburgh, + I can't work on fixing other bugs in this release. + + -- Eloy A. Paris <peloy@debian.org> Tue, 27 Jul 1999 02:18:51 -0400 + +samba (2.0.4b-3) unstable; urgency=low + + * Stupid mistake: I forgot to add /usr/bin/smbumount to debian/smbfs.files + and because of this /usr/bin/smbumount was part of the samba package + instead of part of the smbfs package. + + -- Eloy A. Paris <peloy@debian.org> Thu, 1 Jul 1999 01:51:24 -0400 + +samba (2.0.4b-2) unstable; urgency=low + + * Dark (and archive maintainers): please remove from Potato the smbfsx + binary package and also the old source package for smbfs. smbfs and + smbfsx have been merged starting with this version. + * Merged the old smbfs package with Samba. Now there is only one package + for the smbfs utilities and is called "smbfs". The package smbfsx + does not exist any more and this new smbfs package must be used + for both 2.0.x and > 2.1.x kernels. + * A wrapper script was added to handle the syntax change in smbmount + in the new smbfs utilities (required for kernels > 2.1.70). The + home page for this script is http://www.wittsend.com/mhw/smbmount.html. + Please _note_ that this will change (for good) in Samba 2.0.5 :-) + * Added debian/smbumount.sh. It's another wrapper that calls smbumount-2.2.x + or smbumount-2.0.x depending on the kernel currently running. + * Not using -t for savelog in cron.weekly script. + * Recompiled without libreadlineg-dev (Samba does not seem to be using + it so unnecessary dependencies are produced). + * glibc2.1 build. + * Removed smbpasswd.8 man page from the debian/ directory because it is + now being provided upstream. + * Got rid of the ugly hack I put in source/lib/util_sock.c to have + IPTOS_LOWDELAY and IPTOS_THROUGHPUT defined. Now I patched the + autoconf stuff to #include <netinet/ip.h>. I've sent the patch to + Jeremy Allison so we have this upstream. + + -- Eloy A. Paris <peloy@debian.org> Mon, 28 Jun 1999 17:47:19 -0400 + +samba (2.0.4b-1) unstable; urgency=low + + * New upstream release. This release fixes the following Debian bugs: + #33838 (Amanda/ Samba 2.0.2 and backing up large filesystems) and + #33867 (Amanda 2.4.1 and Samba 2.0.2 and large filesystems). Jeremy + Allison released Samba 2.0.4 and found out that there were a couple + of minor bugs so he released 2.0.4a. Then he found out about more + serious bugs and released 2.0.4b. I have built this package several + times between yesterday and today because of this. Now I am releasing + the Debian packages for Samba with what I believe will be the latest + release the Samba Team will make at least in the next 4 days (Jeremy + is taking a short vacation). + * Still compiling against glibc2.0 (sorry about that :-) + * Hacked source/smbwrapper/smbsh.c to fix the problem + of smbsh not finding the shared library smbwrapper.so. It looks + now in /usr/lib/samba/ for this file. This fixes #32971, #32989, + #33278, #34911 and #36317. + * Made smbfsx depend on samba-common because smbfsx uses /etc/samba/smb.conf + and /etc/samba/codepages/. This fixes #33128 (smbmount complains about + missing /etc/smb.conf). + * Package swat does not depend on httpd anymore (there's no need to). + This fixes #35795 (swat requires httpd). + * Renamed smbmount-2.1.x and smbumount-2.1.x to smbmount-2.2.x and + smbumount-2.2.x. Same applies to the man pages. + * Changed minor type in smbmount's man page (changed "\"" by "\'"). This + fixes #34070 (wrong quotes in manpage). + * Used Fabrizio Polacco's <fpolacco@icenet.fi> procedure to create the + Debian package for Samba. This closes #35781 (samba has no pristine + source). + * Changes to /etc/cron.weely/samba: rotate /var/log/{nmb,smb}.old only + if the size of either is different than 0. Also, added comments at the + beginning of this script to explain how rotation of log files works in + Samba. Thanks to ujr@physik.phy.tu-dresden.de (Ulf Jaenicke-Roessler) + for the suggestions. This closes #37490 (cron.weekly script rotates not + used [sn]mb.old files). As I side effect, this should also close + #31462 (still trouble with /etc/cron.weekly/samba). + * Check for old /etc/pam.d/samba file which is not provided by this version + of the Debian Samba package but was provided in older versions. If this + file exists we delete it. We check for this in the postinst. This closes + #37356 (samba put stuff in pam.d that pam complains about) and #34312 + (libpam0g: questions during upgrade). + * Make sure the mode of /etc/samba/smbpasswd is set to 600. This is done + in the postinst script. This closes #35730 (Security problem with + /etc/samba/smbpasswd when upgrading from samba 1.9.18p8-2 to 2.0.3-1). + * I have just checked and it looks like #28748 (smbfsx doesn't "return ") + has been fixed. This might have been fixed since a long time ago. + * Long long standing bug #18488 (smbclient: internal tar is broken) is + closed in this release of Samba. The bug might have been closed for a + long long time, but I did not check for this before. + * Temporary fix to the annoying "Unknown socket option IPTOS_LOWDELAY" + message. This fixes #33698 (socket option IPTOS_LOWDELAY no longer works), + #34148 (warnings from smbd) and #35333 (samba warnings). + + -- Eloy A. Paris <peloy@debian.org> Thu, 20 May 1999 00:35:57 -0400 + +samba (2.0.3-1) unstable; urgency=low + + * New upstream version. + * Removed the convert_smbpasswd.pl program I created and put in + /usr/doc/samba/ because there's a convert_smbpasswd script in the + upstream sources that does the same thing. I modified the postinst + script to use this script instead of the one I created. + + -- Eloy A. Paris <peloy@debian.org> Sun, 28 Feb 1999 01:35:37 -0400 + +samba (2.0.2-2) unstable; urgency=low + + * Updated the README.Debian file. + * Updated the description of the samba package in the control file. + * The binaries smbmnt and smbumount-2.1.x in the smbfsx package are now + installed setuid root as they should be. This was done by doing a + a "chmod u+s" for each binary in debian/rules and by creating the + file debian/smbfsx.suid. + * Minor patch to source/client/smbumount.c to allow normal users + to umount what they have mounted (problem was a kernel vs. libc6 + size mismatch). I sent the patch upstream. + * Created debian/smbwrapper.dirs so the directory /usr/lib/samba/ is + created. + * Modified debian/rules to move smbwrapper.so from debian/tmp/usr/bin/ to + debian/smbwrapper/usr/lib/samba/. + * Hacked source/smbwrapper/smbsh.c to fix the problem + of smbsh not finding the shared library smbwrapper.so. + + -- Eloy A. Paris <peloy@debian.org> Thu, 11 Feb 1999 18:11:34 -0400 + +samba (2.0.2-1) unstable; urgency=low + + * New upstream version. + + -- Eloy A. Paris <peloy@debian.org> Thu, 11 Feb 1999 01:35:51 -0400 + +samba (2.0.1-1) unstable; urgency=low + + * New upstream version. + + -- Eloy A. Paris <peloy@debian.org> Sat, 6 Feb 1999 06:51:18 -0400 + +samba (2.0.0final-4) unstable; urgency=low + + * The samba postinst made an unwarranted assumption that the file + /etc/samba/smbpasswd exists. If the file did not exist (which is + perfectly valid) the postinst will fail. This fixes #32953. + + -- Eloy A. Paris <peloy@debian.org> Fri, 5 Feb 1999 23:32:46 -0400 + +samba (2.0.0final-3) unstable; urgency=low + + * Added to debian/control a "Depends: ${shlibs:Depends}" line for the + samba-common package so dependencies for this package are set + correctly (thanks to Dark for pointing this out). + + -- Eloy A. Paris <peloy@debian.org> Thu, 4 Feb 1999 09:45:21 -0400 + +samba (2.0.0final-2) unstable; urgency=low + + * Finally!!! The first upload to unstable. Sorry for the delay folks + but I have been quite busy lately :-) Another reason for the delay + is that I wanted to ease the migration from Samba 1.9.18p10 and + before to Samba 2.0.0. I changed the location of the config. files + from /etc/ to /etc/samba/ and this made things a little bit harder. + * This package needs 2.2 kernel headers to compile (well, this is + true for the smbfsx package, all others compile fine with 2.0 kernel + headers). + * Created a preinst script for the samba package to take care of the + location migration of smb.conf (from /etc/ to /etc/samba/). The + preinst script also takes care of moving /etc/smbpasswd to its new + location (/etc/samba/). + * Created postinst and postrm scripts to add/remove an entry for swat + in /etc/inetd.conf. + * I had forgotten to install the sambaconfig script so I changed + debian/rules to install this script. + * Added a postrm script for the samba package (I had forgotten to add + this script to the new Samba packages after the migration from 1.9.18 + to 2.0.0). + * Created a small Perl script that is called from the samba postinst + to convert the smbpasswd from the old format used in version prior + to 2.0.0 to the new one used in 2.0.0 and beyond. + * The upgrade process should be automatically now. Please let me know + of any problems you encounter. + + -- Eloy A. Paris <peloy@debian.org> Sat, 23 Jan 1999 09:34:10 -0400 + +samba (2.0.0final-1) experimental; urgency=low + + * Finally!!! Samba 2.0.0 is here! I am not uploading to unstable + because I still have to work out the migration from the old + samba packages to the new ones. I also need to work more on the + new swat package. + + -- Eloy A. Paris <peloy@debian.org> Thu, 14 Jan 1999 22:40:02 -0400 + +samba (2.0.0beta5-1) experimental; urgency=low + + * New upstream version. + + -- Eloy A. Paris <peloy@debian.org> Tue, 5 Jan 1999 00:37:57 -0400 + +samba (2.0.0beta4-1) experimental; urgency=low + + * New upstream version. + + -- Eloy A. Paris <peloy@debian.org> Wed, 23 Dec 1998 18:37:45 -0400 + +samba (2.0.0beta3-1) experimental; urgency=low + + * New upstream version. + * I have just realized that the documentation patches (for man pages) + that I used for the 1.9.18 release are not longer necessary because + there was a major re-write of all the Samba documentation that added + the missing bits of information. So, I have just removed these minor + patches. + + -- Eloy A. Paris <peloy@debian.org> Tue, 8 Dec 1998 12:00:30 -0400 + +samba (2.0.0beta2-1) experimental; urgency=low + + * New upstream version. + * This new version fixes the potential security problem that + was posted to debian-private (using the "message command" parameter + to execute arbitrary commands from messages sent from LinPopUp). + * Changed /etc/init.d/samba to use one of the variables stored in + /etc/samba/debian_config to know how Samba is being run (from inetd or + as daemons) instead of grepping /etc/inetd.conf which may not exist + if the user is running xinetd (this fixes bug #29687 - assumes using + vanilla inetd) + + -- Eloy A. Paris <peloy@debian.org> Mon, 23 Nov 1998 23:32:03 -0400 + +samba (2.0.0beta1-1) experimental; urgency=low + + * First beta release of the samba-2.0.0 code. Before the beta I was + working with sources downloaded directly from the CVS server. This + package goes into experimental and I plan to release the new + samba to unstable as soon as it gets out of beta. + * Created several packages out of the Samba sources. They are: + samba (nmbd and smbd daemons + related programs), smbclient (FTP + like command line utility to retrieve files from SMB servers), + swat (Samba Web Administration Tool), samba-common (common files + used by samba, smbclient and swat), smbfsx (smbfs utilities for + kernels >= 2.1.70), smbwrapper and samba-doc (Samba documentation). + * Refreshed debian/samba-doc.docs so recently added docs. are + installed in the samba-doc package. New additions include man + pages in the /usr/doc/samba-doc/htmldocs/ directory. + * Deleted Debian specific nmblookup(1) man page as it is now upstream. + * Added smbtorture to smbclient package. + * Moved rpcclient from the samba package to the smbclient package. + * The Samba daemons (nmbd and smbd) now create a PID file so I changed + all calls to start-stop-daemon to use the PID file. + * Fixed debian/rules to install mksmbpasswd (fixes #27655). + * Modified /etc/init.d/samba so nmbd is started without the -a (append + to the log file instead of overwrite) switch. The new behavior of + nmbd is to NOT overwrite log files, so the -a switch can be deleted + safely. + * Moved from debstd to debhelper. + + -- Eloy A. Paris <peloy@debian.org> Thu, 1 Oct 1998 08:37:41 -0400 + +samba (1.9.18p10-5) frozen unstable; urgency=high + + * Oppsss!!! While fixing bug #26884 I introduced a bug even worse than + the one I was trying to fix: in /etc/init.d/samba I got rid of the test + that tells us whether the Samba daemons are running from inetd or as + standalone daemons. I corrected the problem by editing again + /etc/init.d/samba to uncomment the test. + * Wishlist bug #28298 (typos in samba) was fixed. + * Wishlist bug #28309 (typos in smb.conf) was fixed. + + -- Eloy A. Paris <peloy@debian.org> Wed, 28 Oct 1998 09:11:47 -0400 + +samba (1.9.18p10-4) unstable; urgency=low + + * Minor patch to debian/rules to delete *substvars instead of only + substvars when doing a "debian/rules clean" (thanks to Daniel Jacobowitz + <dmj@andrew.cmu.edu> for this). + * Small patch to source/shmem_sysv.c that eases compilation under + glibc-2.1 (thanks to Daniel <dmj@andrew.cmu.edu> for this). + + -- Eloy A. Paris <peloy@debian.org> Thu, 17 Sep 1998 15:33:49 -0400 + +samba (1.9.18p10-3) unstable; urgency=low + + * Patched smbclient again to fix minor formatting problem introduced + by Magosanyi Arpad's smbclient patch. + + -- Eloy A. Paris <peloy@debian.org> Thu, 3 Sep 1998 11:03:23 -0400 + +samba (1.9.18p10-2) unstable; urgency=low + + * Sync'ed include files for the smbfs utilities with the ones in + kernel 2.1.119. + * Added to the /usr/doc/samba/examples/ directory a new script called + wins2dns (courtesy of Jason Gunthorpe <jgg@deltatee.com>) that + generates BIND sonze files for hosts in the WINS database. + * Patched smbclient to include enhancements by Magosanyi Arpad + <mag@bunuel.tii.matav.hu> that make scripting easier. + + -- Eloy A. Paris <peloy@debian.org> Fri, 28 Aug 1998 13:34:54 -0400 + +samba (1.9.18p10-1) stable unstable; urgency=low + + * New upstream version (see /usr/doc/samba/WHATSNEW.txt for a + description of what has changed). I built a 1.9.18p9-1 but I + never released it because an obscure bug was found just a couple + of days before the official release, so the Samba Team stopped + the rollover of 1.9.18p9. + * Updated documentation (new files were added to the docs/ directory + that were not installed in /usr/doc/samba/). + * Fixed long standing bug #7695 (smb.conf's man page doesn't document + 'printing=lprng') - I made a couple of changes to the man page to + include references to lprng. + * Fixes bug #24930 (samba needs to suggest psmisc?). I don't think it + is necessary to make samba suggest psmisc just because the postinst + script mentions to call killall. So, I removed all references to + "killall" in the scripts. + * Fixes bug #25999 (Samba does not by default work with unix password + sync): I added the "passwd program" and "passwd chat" parameters to + the sample smb.conf to reflect the Debian environment. + + -- Eloy A. Paris <peloy@debian.org> Fri, 21 Aug 1998 08:59:18 -0400 + +samba (1.9.18p9-1) unstable; urgency=low + + * New upstream version (see /usr/doc/samba/WHATSNEW.txt for a + description of what has changed). + * Removed Jeremy Allison's patch applied to 1.9.18p8-2 because it is + now part of the new upstream version. + * Corrected small typo in addtosmbpass' man page (fixes #25629). + + -- Eloy A. Paris <peloy@debian.org> Tue, 11 Aug 1998 08:53:08 -0400 + +samba (1.9.18p8-2) frozen unstable; urgency=medium + + * Applied patch received from Jeremy Allison (Samba Team) that fixes + "grave" bug #23903 (samba maps username before authenicating with + NT password server). + * Added a "sleep 2" between "start-stop-daemon --stop" and + "start-stop-daemon --start" in /etc/init.d/samba so when this script + is called with the "restart" parameter the Samba daemons are restarted + properly. This fixes bug #24211 (init.d script doesn't restart). + * Sent start-stop-daemon output in /etc/init.d/samba to /dev/null to + avoid annoying warning messages. + * Added perfomance tune parameters to sample /etc/smb.conf (SO_SNDBUF=4096 + and SO_RCVBUF=4096 to "socket options" in /etc/smb.conf). I can't + find who sent this suggestion to me. If you are listening, drop me a + note and I'll put your name here :-) + + -- Eloy A. Paris <peloy@debian.org> Mon, 29 Jun 1998 08:45:01 -0400 + +samba (1.9.18p8-1) frozen unstable; urgency=low + + * New upstream release that fixes _lots_ of "ugly" bugs. The list of + fixed bugs is too long to include here (see /usr/doc/samba/WHATSNEW.txt). + * Fixed postinst to quote arguments to if [ arg .. ] constructs + (fixes #22881). + * Applied Jeremy Allison's patch (posted to the samba-ntdom mailing + list) that solves a problem with username maps (the Samba Team did + not catch this problem before final 1.9.18p8). + * Made /etc/init.d/samba to print out a warning when Samba is running + from inetd and the user runs /etc/init.d/samba to start|stop|restart + Samba (there's no point on doing this because inetd will start the + daemons again when there is traffic on UDP port 137-139). + + -- Eloy A. Paris <peloy@debian.org> Sat, 13 Jun 1998 00:18:25 -0400 + +samba (1.9.18p7-4) frozen unstable; urgency=medium + + * Fixes the serious problem of having the WINS name server + database getting deleted at boot time. That happened because the + WINS database was being stored under /var/lock/samba/ and all files + under /var/lock/ are deleted at boot time. The place where the WINS + database is stored was moved to /var/samba/. + + -- Eloy A. Paris <peloy@debian.org> Mon, 18 May 1998 20:24:29 -0400 + +samba (1.9.18p7-3) stable; urgency=high + + * Libc5 version for Bo (stable) that fixes the recently reported + security hole. + + -- Eloy A. Paris <peloy@debian.org> Mon, 18 May 1998 20:19:33 -0400 + +samba (1.9.18p7-2) frozen unstable; urgency=low + + * Added patches from the non-mantainer upload that make us able + to compile Samba on Alpha systems. This fixes bug #22379. + + -- Eloy A. Paris <peloy@debian.org> Wed, 13 May 1998 20:38:51 -0400 + +samba (1.9.18p7-1) frozen unstable; urgency=low + + * New upstream release (just bug fixes, no new functionality). + + -- Eloy A. Paris <peloy@debian.org> Wed, 13 May 1998 11:47:32 -0400 + +samba (1.9.18p6-2) frozen unstable; urgency=low + + * Uploaded to frozen (I forgot to upload last version to frozen + so it got installed only in unstable). + + -- Eloy A. Paris <peloy@debian.org> Tue, 12 May 1998 18:10:17 -0400 + +samba (1.9.18p6-1.1) unstable; urgency=low + + * non-maintainer upload for Alpha + * patch needed for source/quota.c (_syscall4() confusion) + + -- Paul Slootman <paul@debian.org> Tue, 12 May 1998 20:39:13 +0200 + +samba (1.9.18p6-1) unstable; urgency=low + + * New upstream release that fixes a possible buffer overflow. + This security hole was reported on BugTraq by Drago. The + previous Debian version (1.9.18p5-1) was not released because + 1.9.18p5 and 1.9.18p6 were released very closely. + + -- Eloy A. Paris <peloy@debian.org> Mon, 11 May 1998 20:28:33 -0400 + +samba (1.9.18p5-1) unstable; urgency=low + + * New upstream release (no new funcionality, just bug fixes - see + /usr/doc/samba/WHATSNEW.txt.gz). + * Backed off Debian patches that were added upstream. + + -- Eloy A. Paris <peloy@debian.org> Mon, 11 May 1998 08:43:53 -0400 + +samba (1.9.18p4-2) frozen unstable; urgency=low + + * Patched smbclient(1) man page to not reference the unsopported + -A parameter (fixes #6863). + * Changes to start nmbd with the -a option (in /etc/init.d/samba + and in the entry added to /etc/inetd.conf). + * Fixed typo in sample smb.conf (fixes #21484). + * Fixed yet another typo in sample smb.conf (fixes #21447). + + -- Eloy A. Paris <peloy@debian.org> Fri, 17 Apr 1998 22:19:23 -0400 + +samba (1.9.18p4-1) frozen unstable; urgency=low + + * New upstream version that fixes several bugs. + * New scheme for keeping track of Debian specific configuration. + This new scheme fixes bug #18624 (Samba always asks the user about + configuration options). New scheme stores Debian specific + configuration information in /etc/samba/debian_config. + * Changes to /usr/sbin/sambaconfig, prerm and postinst to support the + new configuration scheme. + * Moved required kernel 2.1.x include files inside the source tree + so I don't have to do very nasty things like creating crazy + symlinks in /usr/include to make this package compile. This + allows non-root users to build the package and fixes bug + #20104. + * Fixed address of the FSF in /usr/doc/samba/copyright (problem + reported by lintian). + * The /etc/init.d/samba script now supports the force-reload + argument, as required by the policy (problem reported by lintian). + * Added a "rm /etc/cron.weekly/samba" at the end of the postinst. + * Now the samba package can be installed even if no nmbd or smbd processes + are running. This fixes the following bugs: #8917, #9334, #10268, + #10411, #11146 and #13387. + * Provides the original README in /usr/doc/samba. This fixes bug #9693. + * Added a --no-reload option to sambaconfig to not reload Samba + after configuration. + * Created man pages for sambaconfig(8), addtosmbpass(8), + mksmbpasswd(8) and nmblookup(1). + * Corrected small typo in sample /etc/smb.conf. + * Added two new parameters to /etc/smb.conf: "preserver case" and + "short preserve case". + * "rm -Rf /var/lock/samba" in postrm when package is being purged. + * Patched upstream source (nmbd.c) to not overwrite log files when + nmbd is called with the -a parameter (fixes #17704: nmbd ignores + -a option). + * /etc/init.d/samba now starts the nmbd daemon with the -a parameter + to not overwrite log files. + + -- Eloy A. Paris <peloy@debian.org> Mon, 23 Mar 1998 21:22:03 -0400 + +samba (1.9.18p3-1) unstable; urgency=low + + * New upstream version. + * Oppsss!!! I really screwed it up (actually, debstd did). + 1.9.18p2-2 still contained man pages (smbmount and smbumount) part + of other packages. This version does have this corrected. If not, + I no longer deserve to be a Debian developer! So, this version + fixes bug #18438 and some of the bugs I claimed to fix in + 1.9.18p2-2. Oh, by the way, I fixed the problem by running debstd + with -m in debian/rules (man pages are installed by "make install" + so it's a bad idea to re-install man pages with debstd). + + -- Eloy A. Paris <peloy@debian.org> Mon, 23 Feb 1998 17:32:42 -0400 + +samba (1.9.18p2-2) unstable; urgency=low + + * Fixes bugs #18017, #17999, #17961, #17932: old 1.9.18p2-1 provided + a man page for smbmount, which conflicts with package smbfs. This + was solved by creating a multi-binary package that produces + package samba and new package smbfsx. + * Fixes bug #18000 (typo in postinst). + * Fixes bug #17958 (postinst asks obsolete question). Actually, + the question is still asked, but only if Samba is run as daemons. + * Created a multi-binary package from the Samba sources: package + samba and new package smbfsx which provides SMB mount utilities + for kernels > 2.1.70. + + -- Eloy A. Paris <peloy@debian.org> Mon, 9 Feb 1998 19:47:05 -0400 + +samba (1.9.18p2-1) unstable; urgency=low + + * New upstream version. + * Removed /etc/cron.weekly/samba because Samba does not handle well + rotation of log files (if the log file is rotated Samba will + continue to log to the rotated file, instead of the just created + one). In any case, Samba will rotate log files after an specific + file size. + + -- Eloy A. Paris <peloy@debian.org> Tue, 27 Jan 1998 22:34:27 -0400 + +samba (1.9.18p1-2) unstable; urgency=low + + * Created a multi-binary package out of the Samba sources to provide + packages samba and smbfsx (userland utilities to work with + smbfs with kernels > 2.1.x. + + -- Eloy A. Paris <peloy@debian.org> Sat, 17 Jan 1998 09:23:48 -0400 + +samba (1.9.18p1-1) unstable; urgency=low + + * New upstream version. + * Created /etc/cron.daily/samba to save a copy of /etc/smbpasswd in + /var/backups/smbpasswd.bak. + + -- Eloy A. Paris <peloy@debian.org> Wed, 14 Jan 1998 13:40:56 -0400 + +samba (1.9.18alpha14-1) unstable; urgency=low + + * New upstream version. + * Added a note to the postinst script telling the user that he/she + needs to run smbpasswd manually after creating a new /etc/smbpasswd + from /etc/passwd. + + -- Eloy A. Paris <peloy@debian.org> Tue, 23 Dec 1997 23:44:37 -0400 + +samba (1.9.18alpha13-1) unstable; urgency=low + + * New upstream version. + + -- Eloy A. Paris <peloy@debian.org> Tue, 16 Dec 1997 13:02:32 -0400 + +samba (1.9.18alpha12-1) unstable; urgency=low + + * New upstream version. + * Conflicts with the sambades package because the new Samba 1.9.18 + series do not depend on the DES libraries to support encrypted + passwords. + * Added parameter "encrypt passwords = yes" to /etc/smb.conf. + * Compiled with support for quotas in disk_free(). + * Home directories are now exported read only by default. + * Re-worked debian/rules. + * Re-worked sample smb.conf. + + -- Eloy A. Paris <peloy@debian.org> Thu, 4 Dec 1997 22:50:34 -0400 + +samba (1.9.17p4-1) unstable; urgency=low + + * New upstream version. + * Made /etc/smb.conf readable by everybody because some Samba utilities + will fail otherwise when run by non-root users. + * Dropped PAM support while the PAM libraries are ported to libc6. + + -- Eloy A. Paris <peloy@debian.org> Tue, 21 Oct 1997 18:08:49 -0400 + +samba (1.9.17p3-1) unstable; urgency=low + + * New upstream version. + * Made /etc/smb.conf readable only by root as suggested by smbd's man page. + + -- Eloy A. Paris <peloy@debian.org> Wed, 15 Oct 1997 09:21:25 -0400 + +samba (1.9.17p2-2) unstable; urgency=low + + * Running Samba as daemons instead of from inetd. + * Removing netbios entries in /etc/inetd.conf. + + -- Eloy A. Paris <peloy@debian.org> Thu, 9 Oct 1997 23:37:25 -0400 + +samba (1.9.17p2-1) unstable; urgency=low + + * New upstream version that fixes a serious security hole. + * Removed Debian patches added in 1.9.17-1 and 1.9.17p1-1 because + these patches are now part of the upstream release. + + -- Eloy A. Paris <peloy@debian.org> Sun, 28 Sep 1997 22:54:33 -0400 + +samba (1.9.17p1-1) unstable; urgency=low + + * New upstream version. + * Defined symbol _LINUX_C_LIB_VERSION_MAJOR as 6 in includes.h to shut up + compiler warnings. + * Included rpcsvc/ypclnt.h in includes.h to shut up compiler warnings. + * Included crypt.h to have function prototype for crypt(). + * Included netinet/tcp.h to have some socket options included. + * Included netinet/ip.h to have some socket options included. + * Linking with libcrypt (LIBM='... -lcrypt'). Without including this + library smbd generates a seg. fault when authenticating users (?). + + -- Eloy A. Paris <debian.org> Wed, 10 Sep 1997 22:09:18 -0400 + +samba (1.9.17-1) unstable; urgency=low + + * New upstream version (called the "Browse Fix Release") + * Added the option --oknodo to the start-stop-daemon invocation in prerm + script. This was because the prerm was failing because start-stop-daemon + was returning an error code if no nmbd or smbd daemons were found + to kill. + * The function yp_get_default_domain(), referenced in three source + files was part of libc5 but with libc6 (glibc2) it has been moved + to libnss_nis. Since the linker was unable to find the function + I had to add LIBSM='-lnss_nis' to debian/rules. + * Added -DNO_ASMSIGNALH and -DGLIBC2 to FLAGSM in debian/rules + because compiling was failing because of conflicts with glibc2. + * Patched source/includes.h to include termios.h if GLIBC2 is defined. + + -- Eloy A. Paris <peloy@debian.org> Wed, 27 Aug 1997 08:39:32 -0400 + +samba (1.9.17alpha5-1) unstable; urgency=low + + * New upstream version. + + -- Eloy A. Paris <peloy@debian.org> Thu, 14 Aug 1997 18:05:02 -0400 + +samba (1.9.16p11-3) unstable; urgency=low + + * Fixed accidental omission of /etc/pam.d/samba. + + -- Klee Dienes <klee@debian.org> Sat, 15 Mar 1997 22:31:26 -0500 + +samba (1.9.16p11-2) unstable; urgency=low + + * Recompiled against newer PAM libraries. + * Added /etc/pam.d/samba. + + -- Klee Dienes <klee@debian.org> Sat, 8 Mar 1997 01:16:28 -0500 + +samba (1.9.16p11-1) unstable; urgency=low + + * New upstream release. + * Added PAM support. + + -- Klee Dienes <klee@debian.org> Tue, 25 Feb 1997 18:00:12 -0500 + +samba (1.9.16p9-2) unstable; urgency=low + + * minor packaging changes + + -- Klee Dienes <klee@sauron.sedona.com> Sun, 3 Nov 1996 11:45:37 -0700 + +samba (1.9.16p9-1) unstable; urgency=low + + * upgraded to new upstream version + + -- Klee Dienes <klee@sauron.sedona.com> Sat, 26 Oct 1996 21:38:20 -0700 + +1.9.16alpha10-1: + 960714 + * Removed Package_Revision from control file. + * Removed -m486 compiler option. + * Added Architecture, Section and Priority fields to control file. + * Upgraded to latest upstream version. + * Uses update-inetd now. + * Added shadow passwords support. + * Fixed Bug#1946: nmbd won't browse + +1.9.15p4-1: + 951128 + * Upgraded to latest upstream version. + * Fixed many bugs. + * Adds Master Browsing support. + * Converted to ELF. + * Fixed bug #1825 - nmbd is now killed when removing samba. + +1.9.14-1: + 950926 Andrew Howell <andrew@it.com.au> + * Upgraded to latest version. + * Fixed Bug #1139 - samba won't print + +1.9.14alpha5-1: + * Fixes killing of inetd problem in debian.postint and debian.postrm + +1.9.14alpha5-0: + 950704 Andrew Howell <andrew@it.com.au> + * Taken over samba package from Bruce Perens. + * Upgraded to newest version of samba. + +1.9.02-1: + 9-January-1994 Bruce Perens <Bruce@Pixar.com> + * Added Debian GNU/Linux package maintenance system files, and + configured for Debian systems. diff --git a/packaging/Debian/debian-stable/config.cache b/packaging/Debian/debian-sarge/config.cache index 8872a27b76..8872a27b76 100644 --- a/packaging/Debian/debian-stable/config.cache +++ b/packaging/Debian/debian-sarge/config.cache diff --git a/packaging/Debian/debian-stable/config.cache.alpha-linux b/packaging/Debian/debian-sarge/config.cache.alpha-linux index 6d17192026..6d17192026 100644 --- a/packaging/Debian/debian-stable/config.cache.alpha-linux +++ b/packaging/Debian/debian-sarge/config.cache.alpha-linux diff --git a/packaging/Debian/debian-stable/config.cache.sparc-linux b/packaging/Debian/debian-sarge/config.cache.sparc-linux index a2a21b1d3a..a2a21b1d3a 100644 --- a/packaging/Debian/debian-stable/config.cache.sparc-linux +++ b/packaging/Debian/debian-sarge/config.cache.sparc-linux diff --git a/packaging/Debian/debian-sarge/control b/packaging/Debian/debian-sarge/control new file mode 100644 index 0000000000..712c57c144 --- /dev/null +++ b/packaging/Debian/debian-sarge/control @@ -0,0 +1,201 @@ +Source: samba +Section: net +Priority: optional +Maintainer: Simo Sorce <idra@samba.org> +Uploaders: Simo Sorce <idra@samba.org> +Build-Depends: debhelper (>= 4.1.13), libpam0g-dev, libreadline4-dev, libcupsys2-dev (>=1.1.20final+cvs20040330-4), autoconf, libacl1-dev (>= 2.2.11-1) [alpha arm hppa i386 ia64 m68k mips mipsel powerpc s390 s390x sh3 sh3eb sh4 sh4eb sparc sparc64 amd64], libkrb5-dev, libldap2-dev, po-debconf, python2.3-dev, binutils (>= 2.14.90.0.7), type-handling (>= 0.2.1) +Standards-Version: 3.5.10 + +Package: samba +Architecture: any +Depends: samba-common (= ${Source-Version}), netbase, logrotate, ${shlibs:Depends}, ${misc:Depends}, libpam-runtime (>= 0.76-13.1), libpam-modules +Replaces: samba-common (<= 2.0.5a-2) +Suggests: samba-doc +Description: a LanManager-like file and printer server for Unix + The Samba software suite is a collection of programs that + implements the SMB protocol for unix systems, allowing you to serve + files and printers to Windows, NT, OS/2 and DOS clients. This protocol + is sometimes also referred to as the LanManager or NetBIOS protocol. + . + This package contains all the components necessary to turn your + Debian GNU/Linux box into a powerful file and printer server. + . + Currently, the Samba Debian packages consist of the following: + . + samba - LanManager-like file and printer server for Unix. + samba-common - Samba common files used by both the server and the client. + smbclient - LanManager-like simple client for Unix. + swat - Samba Web Administration Tool + samba-doc - Samba documentation. + smbfs - Mount and umount commands for the smbfs (kernels 2.2.x and above). + libpam-smbpass - pluggable authentication module for SMB password database + libsmbclient - Shared library that allows applications to talk to SMB servers + libsmbclient-dev - libsmbclient shared libraries + winbind: Service to resolve user and group information from Windows NT servers + python2.3-samba: Python bindings that allow access to various aspects of Samba + . + It is possible to install a subset of these packages depending on + your particular needs. For example, to access other SMB servers you + should only need the smbclient and samba-common packages. + +Package: samba-common +Architecture: any +Depends: debconf, libpam-modules, ${shlibs:Depends} +Replaces: samba (<< 2.999+3.0.alpha21-4) +Description: Samba common files used by both the server and the client + The Samba software suite is a collection of programs that + implements the SMB protocol for unix systems, allowing you to serve + files and printers to Windows, NT, OS/2 and DOS clients. This protocol + is sometimes also referred to as the LanManager or NetBIOS protocol. + . + This package contains the common files that are used by both the server + (provided in the samba package) and the client (provided in the smbclient + package). + +Package: smbclient +Architecture: any +Depends: samba-common (= ${Source-Version}), ${shlibs:Depends} +Replaces: samba (<< 2.999+3.0.alpha21-4) +Provides: samba-client +Suggests: smbfs +Description: a LanManager-like simple client for Unix + The Samba software suite is a collection of programs that + implements the SMB protocol for unix systems, allowing you to serve + files and printers to Windows, NT, OS/2 and DOS clients. This protocol + is sometimes also referred to as the LanManager or NetBIOS protocol. + . + This package contains some client components of the Samba suite. In + particular it includes the command line utilities smbclient, smbtar, + and smbspool. If you want to mount shares exported from Microsoft + Windows machines or a Samba server you must install the smbfs package. + +Package: swat +Architecture: any +Depends: debconf, samba (= ${Source-Version}), ${shlibs:Depends} +Recommends: samba-doc +Description: Samba Web Administration Tool + The Samba software suite is a collection of programs that + implements the SMB protocol for unix systems, allowing you to serve + files and printers to Windows, NT, OS/2 and DOS clients. This protocol + is sometimes also referred to as the LanManager or NetBIOS protocol. + . + This package contains the components of the Samba suite that are needed + for Web administration of the Samba server. + . + Note: if you want to use the on-line documentation that is accesible + through the Swat front-end you must install the samba-doc package. + +Package: samba-doc +Section: doc +Architecture: all +Description: Samba documentation + The Samba software suite is a collection of programs that + implements the SMB protocol for unix systems, allowing you to serve + files and printers to Windows, NT, OS/2 and DOS clients. This protocol + is sometimes also referred to as the LanManager or NetBIOS protocol. + . + This package contains all the documentation that comes in the original + tarball. + +Package: smbfs +Section: otherosfs +Priority: optional +Architecture: any +Depends: netbase (>= 2.02), samba-common (= ${Source-Version}), ${shlibs:Depends} +Suggests: smbclient +Replaces: smbfsx +Conflicts: smbfsx, suidmanager (<< 0.50) +Description: mount and umount commands for the smbfs (for kernels >= than 2.2.x) + Smbfs is a filesystem which understands the SMB protocol. + This is the protocol Windows for Workgroups, Windows NT or + LAN Manager use to talk to each other. It was inspired by + samba, the program by Andrew Tridgell that turns any unix + site into a file server for DOS or Windows clients. + . + If you want to use command-line utilities like smbclient, smbtar + and/or smbspool you just need to install the smbclient package. + . + Starting with the Debian Samba packages version 2.2.0-1, the old smbfs + utilities for 2.0.x have been removed. There are no wrapper scripts + that call a specific smbmount/smbumount depending on the kernel + version. If you are using a 2.0.x kernel please upgrade or use the + latest Samba 2.0.7 Debian package. + +Package: libpam-smbpass +Section: admin +Priority: extra +Architecture: any +Depends: ${shlibs:Depends} +Suggests: samba +Description: pluggable authentication module for SMB password database + This is a stackable PAM module that allows a system administrator to easily + migrate to using encrypted passwords for Samba and to keep smb passwords in + sync with unix passwords. Unlike other solutions, it does this without + requiring users to change their existing passwords or login to Samba using + cleartext passwords. + +Package: libsmbclient +Section: libs +Priority: extra +Architecture: any +Depends: ${shlibs:Depends} +Description: shared library that allows applications to talk to SMB servers + libsmbclient allows to write applications that use the SMB protocol. + This gives applications the ability to talk to Microsoft Windows servers + and Unix servers running Samba. + . + This package contains the libsmbclient shared library. + +Package: libsmbclient-dev +Section: libdevel +Priority: extra +Architecture: any +Depends: libsmbclient (= ${Source-Version}) +Description: libsmbclient static libraries and headers + libsmbclient allows to write applications that use the SMB protocol. + This gives applications the ability to talk to Microsoft Windows servers + and Unix servers running Samba. + . + This package contains the libsmbclient static libraries and headers + needed to build applications that use SMB services. + +Package: winbind +Section: net +Priority: optional +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Replaces: samba (<= 2.2.3-2) +Description: service to resolve user and group information from Windows NT servers + This package provides the winbindd daemon, which provides a + service for the Name Service Switch capability that is present + in most modern C libraries (like the GNU C Library - glibc.) + . + The service provided by winbindd is called `winbind' and + can be used to resolve user and group information from a + Windows NT server. The service can also provide authentication + services via an associated PAM module. + +Package: python2.3-samba +Section: python +Priority: optional +Architecture: any +Depends: ${shlibs:Depends}, python2.3 +Description: Python bindings that allow access to various aspects of Samba + The Samba Python bindings allow you to access various aspects of Samba. + At the moment their status is "experimental" but they have been reported + to work well. + . + See /usr/share/doc/python2.3-samba/examples for a couple of examples. + +Package: samba-dbg +Section: devel +Architecture: any +Depends: samba (= ${Source-Version}) +Description: Samba debugging symbols + The Samba software suite is a collection of programs that + implements the SMB protocol for unix systems, allowing you to serve + files and printers to Windows, NT, OS/2 and DOS clients. This protocol + is sometimes also referred to as the LanManager or NetBIOS protocol. + . + This package contains debugging symbols for the programs included in + the samba and smbclient packages. diff --git a/packaging/Debian/debian-sarge/control.in b/packaging/Debian/debian-sarge/control.in new file mode 100644 index 0000000000..0e25412e67 --- /dev/null +++ b/packaging/Debian/debian-sarge/control.in @@ -0,0 +1,201 @@ +Source: samba +Section: net +Priority: optional +Maintainer: Simo Sorce <idra@samba.org> +Uploaders: Simo Sorce <idra@samba.org> +Build-Depends: debhelper (>= 4.1.13), libpam0g-dev, libreadline4-dev, libcupsys2-dev (>=1.1.20final+cvs20040330-4), autoconf, libacl1-dev (>= 2.2.11-1) [@libacl@], libkrb5-dev, libldap2-dev, po-debconf, python2.3-dev, binutils (>= 2.14.90.0.7), type-handling (>= 0.2.1) +Standards-Version: 3.5.10 + +Package: samba +Architecture: any +Depends: samba-common (= ${Source-Version}), netbase, logrotate, ${shlibs:Depends}, ${misc:Depends}, libpam-runtime (>= 0.76-13.1), libpam-modules +Replaces: samba-common (<= 2.0.5a-2) +Suggests: samba-doc +Description: a LanManager-like file and printer server for Unix + The Samba software suite is a collection of programs that + implements the SMB protocol for unix systems, allowing you to serve + files and printers to Windows, NT, OS/2 and DOS clients. This protocol + is sometimes also referred to as the LanManager or NetBIOS protocol. + . + This package contains all the components necessary to turn your + Debian GNU/Linux box into a powerful file and printer server. + . + Currently, the Samba Debian packages consist of the following: + . + samba - LanManager-like file and printer server for Unix. + samba-common - Samba common files used by both the server and the client. + smbclient - LanManager-like simple client for Unix. + swat - Samba Web Administration Tool + samba-doc - Samba documentation. + smbfs - Mount and umount commands for the smbfs (kernels 2.2.x and above). + libpam-smbpass - pluggable authentication module for SMB password database + libsmbclient - Shared library that allows applications to talk to SMB servers + libsmbclient-dev - libsmbclient shared libraries + winbind: Service to resolve user and group information from Windows NT servers + python2.3-samba: Python bindings that allow access to various aspects of Samba + . + It is possible to install a subset of these packages depending on + your particular needs. For example, to access other SMB servers you + should only need the smbclient and samba-common packages. + +Package: samba-common +Architecture: any +Depends: debconf, libpam-modules, ${shlibs:Depends} +Replaces: samba (<< 2.999+3.0.alpha21-4) +Description: Samba common files used by both the server and the client + The Samba software suite is a collection of programs that + implements the SMB protocol for unix systems, allowing you to serve + files and printers to Windows, NT, OS/2 and DOS clients. This protocol + is sometimes also referred to as the LanManager or NetBIOS protocol. + . + This package contains the common files that are used by both the server + (provided in the samba package) and the client (provided in the smbclient + package). + +Package: smbclient +Architecture: any +Depends: samba-common (= ${Source-Version}), ${shlibs:Depends} +Replaces: samba (<< 2.999+3.0.alpha21-4) +Provides: samba-client +Suggests: smbfs +Description: a LanManager-like simple client for Unix + The Samba software suite is a collection of programs that + implements the SMB protocol for unix systems, allowing you to serve + files and printers to Windows, NT, OS/2 and DOS clients. This protocol + is sometimes also referred to as the LanManager or NetBIOS protocol. + . + This package contains some client components of the Samba suite. In + particular it includes the command line utilities smbclient, smbtar, + and smbspool. If you want to mount shares exported from Microsoft + Windows machines or a Samba server you must install the smbfs package. + +Package: swat +Architecture: any +Depends: debconf, samba (= ${Source-Version}), ${shlibs:Depends} +Recommends: samba-doc +Description: Samba Web Administration Tool + The Samba software suite is a collection of programs that + implements the SMB protocol for unix systems, allowing you to serve + files and printers to Windows, NT, OS/2 and DOS clients. This protocol + is sometimes also referred to as the LanManager or NetBIOS protocol. + . + This package contains the components of the Samba suite that are needed + for Web administration of the Samba server. + . + Note: if you want to use the on-line documentation that is accesible + through the Swat front-end you must install the samba-doc package. + +Package: samba-doc +Section: doc +Architecture: all +Description: Samba documentation + The Samba software suite is a collection of programs that + implements the SMB protocol for unix systems, allowing you to serve + files and printers to Windows, NT, OS/2 and DOS clients. This protocol + is sometimes also referred to as the LanManager or NetBIOS protocol. + . + This package contains all the documentation that comes in the original + tarball. + +Package: smbfs +Section: otherosfs +Priority: optional +Architecture: any +Depends: netbase (>= 2.02), samba-common (= ${Source-Version}), ${shlibs:Depends} +Suggests: smbclient +Replaces: smbfsx +Conflicts: smbfsx, suidmanager (<< 0.50) +Description: mount and umount commands for the smbfs (for kernels >= than 2.2.x) + Smbfs is a filesystem which understands the SMB protocol. + This is the protocol Windows for Workgroups, Windows NT or + LAN Manager use to talk to each other. It was inspired by + samba, the program by Andrew Tridgell that turns any unix + site into a file server for DOS or Windows clients. + . + If you want to use command-line utilities like smbclient, smbtar + and/or smbspool you just need to install the smbclient package. + . + Starting with the Debian Samba packages version 2.2.0-1, the old smbfs + utilities for 2.0.x have been removed. There are no wrapper scripts + that call a specific smbmount/smbumount depending on the kernel + version. If you are using a 2.0.x kernel please upgrade or use the + latest Samba 2.0.7 Debian package. + +Package: libpam-smbpass +Section: admin +Priority: extra +Architecture: any +Depends: ${shlibs:Depends} +Suggests: samba +Description: pluggable authentication module for SMB password database + This is a stackable PAM module that allows a system administrator to easily + migrate to using encrypted passwords for Samba and to keep smb passwords in + sync with unix passwords. Unlike other solutions, it does this without + requiring users to change their existing passwords or login to Samba using + cleartext passwords. + +Package: libsmbclient +Section: libs +Priority: extra +Architecture: any +Depends: ${shlibs:Depends} +Description: shared library that allows applications to talk to SMB servers + libsmbclient allows to write applications that use the SMB protocol. + This gives applications the ability to talk to Microsoft Windows servers + and Unix servers running Samba. + . + This package contains the libsmbclient shared library. + +Package: libsmbclient-dev +Section: libdevel +Priority: extra +Architecture: any +Depends: libsmbclient (= ${Source-Version}) +Description: libsmbclient static libraries and headers + libsmbclient allows to write applications that use the SMB protocol. + This gives applications the ability to talk to Microsoft Windows servers + and Unix servers running Samba. + . + This package contains the libsmbclient static libraries and headers + needed to build applications that use SMB services. + +Package: winbind +Section: net +Priority: optional +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Replaces: samba (<= 2.2.3-2) +Description: service to resolve user and group information from Windows NT servers + This package provides the winbindd daemon, which provides a + service for the Name Service Switch capability that is present + in most modern C libraries (like the GNU C Library - glibc.) + . + The service provided by winbindd is called `winbind' and + can be used to resolve user and group information from a + Windows NT server. The service can also provide authentication + services via an associated PAM module. + +Package: python2.3-samba +Section: python +Priority: optional +Architecture: any +Depends: ${shlibs:Depends}, python2.3 +Description: Python bindings that allow access to various aspects of Samba + The Samba Python bindings allow you to access various aspects of Samba. + At the moment their status is "experimental" but they have been reported + to work well. + . + See /usr/share/doc/python2.3-samba/examples for a couple of examples. + +Package: samba-dbg +Section: devel +Architecture: any +Depends: samba (= ${Source-Version}) +Description: Samba debugging symbols + The Samba software suite is a collection of programs that + implements the SMB protocol for unix systems, allowing you to serve + files and printers to Windows, NT, OS/2 and DOS clients. This protocol + is sometimes also referred to as the LanManager or NetBIOS protocol. + . + This package contains debugging symbols for the programs included in + the samba and smbclient packages. diff --git a/packaging/Debian/debian-sarge/copyright b/packaging/Debian/debian-sarge/copyright new file mode 100644 index 0000000000..78dbaf25c6 --- /dev/null +++ b/packaging/Debian/debian-sarge/copyright @@ -0,0 +1,30 @@ +This is the Samba Team prepackaged version of the Samba SMB +(LAN-Manager) server for Debian systems. Samba was written by +Andrew Tridgell <tridge@samba.org>, the Samba Team and many others. + +This package has been produced by Simo Sorce <idra@samba.org> +using scripts put together by Eloy Paris <peloy@debian.org>, +Steve Langasek <vorlon@debian.org>, and VÃctor Pérez Pereira +<vperez@debianvenezuela.org> based on previous work by Klee Dienes +<klee@debian.org>, Andrew Howell <andrew@it.com.au> and Bruce Perens +<bruce@pixar.com> from sources found at +<URL:http://www.samba.org/samba/ftp/>. + +Copyright: + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 dated June, 1991. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, Boston, + MA 02111-1307, USA + +On Debian GNU/Linux systems, the complete text of the GNU General +Public License can be found in `/usr/share/common-licenses/GPL'. diff --git a/packaging/Debian/debian-stable/gdbcommands b/packaging/Debian/debian-sarge/gdbcommands index 5774b9ae31..5774b9ae31 100644 --- a/packaging/Debian/debian-stable/gdbcommands +++ b/packaging/Debian/debian-sarge/gdbcommands diff --git a/packaging/Debian/debian-stable/libpam-smbpass.docs b/packaging/Debian/debian-sarge/libpam-smbpass.docs index 89fbbf9042..89fbbf9042 100644 --- a/packaging/Debian/debian-stable/libpam-smbpass.docs +++ b/packaging/Debian/debian-sarge/libpam-smbpass.docs diff --git a/packaging/Debian/debian-stable/libpam-smbpass.examples b/packaging/Debian/debian-sarge/libpam-smbpass.examples index 48d841b2c1..48d841b2c1 100644 --- a/packaging/Debian/debian-stable/libpam-smbpass.examples +++ b/packaging/Debian/debian-sarge/libpam-smbpass.examples diff --git a/packaging/Debian/debian-stable/libpam-smbpass.files b/packaging/Debian/debian-sarge/libpam-smbpass.files index 4263df5c0f..4263df5c0f 100644 --- a/packaging/Debian/debian-stable/libpam-smbpass.files +++ b/packaging/Debian/debian-sarge/libpam-smbpass.files diff --git a/packaging/Debian/debian-stable/libsmbclient-dev.examples b/packaging/Debian/debian-sarge/libsmbclient-dev.examples index 2094c40b55..2094c40b55 100644 --- a/packaging/Debian/debian-stable/libsmbclient-dev.examples +++ b/packaging/Debian/debian-sarge/libsmbclient-dev.examples diff --git a/packaging/Debian/debian-stable/libsmbclient-dev.files b/packaging/Debian/debian-sarge/libsmbclient-dev.files index a52c17cfc5..a52c17cfc5 100644 --- a/packaging/Debian/debian-stable/libsmbclient-dev.files +++ b/packaging/Debian/debian-sarge/libsmbclient-dev.files diff --git a/packaging/Debian/debian-stable/libsmbclient.files b/packaging/Debian/debian-sarge/libsmbclient.files index 18b7f3b165..18b7f3b165 100644 --- a/packaging/Debian/debian-stable/libsmbclient.files +++ b/packaging/Debian/debian-sarge/libsmbclient.files diff --git a/packaging/Debian/debian-sarge/libsmbclient.shlibs b/packaging/Debian/debian-sarge/libsmbclient.shlibs new file mode 100644 index 0000000000..532b5de4d1 --- /dev/null +++ b/packaging/Debian/debian-sarge/libsmbclient.shlibs @@ -0,0 +1 @@ +libsmbclient 0 libsmbclient (>= 3.0.2a-1) diff --git a/packaging/Debian/debian-stable/mksmbpasswd.8 b/packaging/Debian/debian-sarge/mksmbpasswd.8 index 0a500102e8..0a500102e8 100644 --- a/packaging/Debian/debian-stable/mksmbpasswd.8 +++ b/packaging/Debian/debian-sarge/mksmbpasswd.8 diff --git a/packaging/Debian/debian-stable/mksmbpasswd.awk b/packaging/Debian/debian-sarge/mksmbpasswd.awk index a7b41a725d..a7b41a725d 100644 --- a/packaging/Debian/debian-stable/mksmbpasswd.awk +++ b/packaging/Debian/debian-sarge/mksmbpasswd.awk diff --git a/packaging/Debian/debian-stable/panic-action b/packaging/Debian/debian-sarge/panic-action index 13f773c1ef..13f773c1ef 100644 --- a/packaging/Debian/debian-stable/panic-action +++ b/packaging/Debian/debian-sarge/panic-action diff --git a/packaging/Debian/debian-sarge/patches/VERSION.patch b/packaging/Debian/debian-sarge/patches/VERSION.patch new file mode 100644 index 0000000000..efa7d85d4d --- /dev/null +++ b/packaging/Debian/debian-sarge/patches/VERSION.patch @@ -0,0 +1,8 @@ +--- samba-3.0.0rc2/source/VERSION.orig 2003-09-02 21:56:11.000000000 -0400 ++++ samba-3.0.0rc2/source/VERSION 2003-09-02 21:56:30.000000000 -0400 +@@ -78,4 +78,4 @@ + # e.g. SAMBA_VERSION_VENDOR_SUFFIX=vendor_version() # + # -> "CVS 3.0.0rc2-VendorVersion" # + ######################################################## +-SAMBA_VERSION_VENDOR_SUFFIX= ++SAMBA_VERSION_VENDOR_SUFFIX="Debian" diff --git a/packaging/Debian/debian-sarge/patches/cups.patch b/packaging/Debian/debian-sarge/patches/cups.patch new file mode 100644 index 0000000000..8b1b8653d9 --- /dev/null +++ b/packaging/Debian/debian-sarge/patches/cups.patch @@ -0,0 +1,14 @@ +--- samba-3.0.10.orig/source/include/includes.h ++++ samba-3.0.10/source/include/includes.h +@@ -940,10 +940,7 @@ + #endif + + #ifndef DEFAULT_PRINTING +-#ifdef HAVE_CUPS +-#define DEFAULT_PRINTING PRINT_CUPS +-#define PRINTCAP_NAME "cups" +-#elif defined(SYSV) ++#if defined(SYSV) + #define DEFAULT_PRINTING PRINT_SYSV + #define PRINTCAP_NAME "lpstat" + #else diff --git a/packaging/Debian/debian-sarge/patches/documentation.patch b/packaging/Debian/debian-sarge/patches/documentation.patch new file mode 100644 index 0000000000..505a53c51b --- /dev/null +++ b/packaging/Debian/debian-sarge/patches/documentation.patch @@ -0,0 +1,66 @@ +--- samba-3.0.4/docs/manpages/swat.8.orig 2004-05-05 10:22:50.000000000 -0400 ++++ samba-3.0.4/docs/manpages/swat.8 2004-05-10 13:25:53.000000000 -0400 +@@ -80,6 +80,13 @@ + .SH "INSTALLATION" + + .PP ++\fBDebian-specific Note\fR: all these steps have already been done for ++you. However, by default, swat is not enabled. This has been done for ++security reasons. To enable swat you need to edit /etc/inetd.conf, ++uncomment the swat entry (usually at the end of the file), and then ++restart inetd. ++ ++.PP + Swat is included as binary package with most distributions\&. The package manager in this case takes care of the installation and configuration\&. This section is only for those who have compiled swat from scratch\&. + + .PP +@@ -87,13 +94,13 @@ + + .TP 3 + \(bu +-/usr/local/samba/sbin/swat ++/usr/sbin/swat + .TP + \(bu +-/usr/local/samba/swat/images/* ++/usr/share/samba/swat/images/* + .TP + \(bu +-/usr/local/samba/swat/help/* ++/usr/share/samba/swat/help/* + .LP + + .SS "Inetd Installation" +@@ -102,7 +109,7 @@ + You need to edit your \fI/etc/inetd\&.conf \fR and \fI/etc/services\fR to enable SWAT to be launched via \fBinetd\fR\&. + + .PP +-In \fI/etc/services\fR you need to add a line like this: ++In \fI/etc/services\fR you need to add a line like this (not needed for Debian): + + .PP + \fBswat 901/tcp\fR +@@ -114,10 +121,10 @@ + the choice of port number isn't really important except that it should be less than 1024 and not currently used (using a number above 1024 presents an obscure security hole depending on the implementation details of your\fBinetd\fR daemon)\&. + + .PP +-In \fI/etc/inetd\&.conf\fR you should add a line like this: ++In \fI/etc/inetd\&.conf\fR you should add a line like this (not needed for Debian since the maintainer scripts do it automatically. You need to uncomment the line, though, because it is added commented out for security reasons): + + .PP +-\fBswat stream tcp nowait\&.400 root /usr/local/samba/sbin/swat swat\fR ++\fBswat stream tcp nowait\&.400 root /usr/sbin/swat swat\fR + + .PP + Once you have edited \fI/etc/services\fR and \fI/etc/inetd\&.conf\fR you need to send a HUP signal to inetd\&. To do this use \fBkill \-1 PID \fR where PID is the process ID of the inetd daemon\&. +@@ -141,8 +148,8 @@ + This file must contain a mapping of service name (e\&.g\&., swat) to service port (e\&.g\&., 901) and protocol type (e\&.g\&., tcp)\&. + + .TP +-\fI/usr/local/samba/lib/smb\&.conf\fR +-This is the default location of the \fBsmb\&.conf\fR(5) server configuration file that swat edits\&. Other common places that systems install this file are \fI /usr/samba/lib/smb\&.conf\fR and \fI/etc/smb\&.conf \fR\&. This file describes all the services the server is to make available to clients\&. ++\fI/etc/samba/smb\&.conf\fR ++This is the default location of the \fBsmb\&.conf\fR(5) server configuration file that swat edits\&. This file describes all the services the server is to make available to clients\&. + + .SH "WARNINGS" + diff --git a/packaging/Debian/debian-sarge/patches/fhs.patch b/packaging/Debian/debian-sarge/patches/fhs.patch new file mode 100644 index 0000000000..0790c17b2f --- /dev/null +++ b/packaging/Debian/debian-sarge/patches/fhs.patch @@ -0,0 +1,558 @@ +diff -uNr samba-3.0.10.orig/source/Makefile.in samba-3.0.10/source/Makefile.in +--- samba-3.0.10.orig/source/Makefile.in 2004-12-17 03:50:08.000000000 -0800 ++++ samba-3.0.10/source/Makefile.in 2004-12-17 03:55:29.000000000 -0800 +@@ -90,6 +90,13 @@ + # the directory where lock files go + LOCKDIR = @lockdir@ + ++# FHS directories; equal to LOCKDIR if not using --with-fhs ++CACHEDIR = @cachedir@ ++STATEDIR = @statedir@ ++ ++# Where to look for (and install) codepage databases. ++CODEPAGEDIR = @codepagedir@ ++ + # the directory where pid files go + PIDDIR = @piddir@ + # man pages language(s) +@@ -114,7 +121,7 @@ + PATH_FLAGS4 = $(PATH_FLAGS3) -DSWATDIR=\"$(SWATDIR)\" -DLOCKDIR=\"$(LOCKDIR)\" -DPIDDIR=\"$(PIDDIR)\" + PATH_FLAGS5 = $(PATH_FLAGS4) -DLIBDIR=\"$(LIBDIR)\" \ + -DLOGFILEBASE=\"$(LOGFILEBASE)\" -DSHLIBEXT=\"@SHLIBEXT@\" +-PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\" ++PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\" -DCODEPAGEDIR=\"$(CODEPAGEDIR)\" -DCACHEDIR=\"$(CACHEDIR)\" -DSTATEDIR=\"$(STATEDIR)\" + PATH_FLAGS = $(PATH_FLAGS6) $(PASSWD_FLAGS) + + # Note that all executable programs now provide for an optional executable suffix. +@@ -1319,7 +1326,7 @@ + @$(SHELL) $(srcdir)/script/installscripts.sh $(INSTALLPERMS) $(DESTDIR)$(BINDIR) $(SCRIPTS) + + installdat: installdirs +- @$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR)$(LIBDIR) $(srcdir) ++ @$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR)$(CODEPAGEDIR) $(srcdir) + + installmsg: installdirs + @$(SHELL) $(srcdir)/script/installmsg.sh $(DESTDIR)$(LIBDIR) $(srcdir) +diff -uNr samba-3.0.10.orig/source/configure.in samba-3.0.10/source/configure.in +--- samba-3.0.10.orig/source/configure.in 2004-12-17 03:50:08.000000000 -0800 ++++ samba-3.0.10/source/configure.in 2004-12-17 03:55:29.000000000 -0800 +@@ -35,7 +35,7 @@ + [ --with-fhs Use FHS-compliant paths (default=no)], + [ case "$withval" in + yes) +- lockdir="\${VARDIR}/lib/samba" ++ lockdir="\${VARDIR}/run/samba" + piddir="\${VARDIR}/run" + mandir="\${prefix}/share/man" + logfilebase="\${VARDIR}/log/samba" +@@ -43,6 +43,10 @@ + libdir="\${prefix}/lib/samba" + configdir="${sysconfdir}/samba" + swatdir="\${DATADIR}/samba/swat" ++ codepagedir="\${DATADIR}/samba" ++ statedir="\${VARDIR}/lib/samba" ++ cachedir="\${VARDIR}/cache/samba" ++ AC_DEFINE(FHS_COMPATIBLE, 1, [Whether to use fully FHS-compatible paths]) + ;; + esac]) + +@@ -201,6 +205,9 @@ + AC_SUBST(swatdir) + AC_SUBST(bindir) + AC_SUBST(sbindir) ++AC_SUBST(codepagedir) ++AC_SUBST(statedir) ++AC_SUBST(cachedir) + + dnl Unique-to-Samba variables we'll be playing with. + AC_SUBST(SHELL) +diff -uNr samba-3.0.10.orig/source/dynconfig.c samba-3.0.10/source/dynconfig.c +--- samba-3.0.10.orig/source/dynconfig.c 2004-12-17 03:50:08.000000000 -0800 ++++ samba-3.0.10/source/dynconfig.c 2004-12-17 03:55:29.000000000 -0800 +@@ -53,6 +53,13 @@ + pstring dyn_LMHOSTSFILE = LMHOSTSFILE; + + /** ++ * @brief Samba data directory. ++ * ++ * @sa data_path() to get the path to a file inside the CODEPAGEDIR. ++ **/ ++pstring dyn_CODEPAGEDIR = CODEPAGEDIR; ++ ++/** + * @brief Samba library directory. + * + * @sa lib_path() to get the path to a file inside the LIBDIR. +@@ -70,3 +77,27 @@ + + const pstring dyn_SMB_PASSWD_FILE = SMB_PASSWD_FILE; + const pstring dyn_PRIVATE_DIR = PRIVATE_DIR; ++ ++ ++/* In non-FHS mode, these should be configurable using 'lock dir ='; ++ but in FHS mode, they are their own directory. Implement as wrapper ++ functions so that everything can still be kept in dynconfig.c. ++ */ ++ ++char *dyn_STATEDIR(void) ++{ ++#ifdef FHS_COMPATIBLE ++ return STATEDIR; ++#else ++ return lp_lockdir(); ++#endif ++} ++ ++char *dyn_CACHEDIR(void) ++{ ++#ifdef FHS_COMPATIBLE ++ return CACHEDIR; ++#else ++ return lp_lockdir(); ++#endif ++} +diff -uNr samba-3.0.10.orig/source/groupdb/mapping.c samba-3.0.10/source/groupdb/mapping.c +--- samba-3.0.10.orig/source/groupdb/mapping.c 2004-12-17 03:50:08.000000000 -0800 ++++ samba-3.0.10/source/groupdb/mapping.c 2004-12-17 03:55:29.000000000 -0800 +@@ -140,7 +140,7 @@ + + if (tdb) + return True; +- tdb = tdb_open_log(lock_path("group_mapping.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); ++ tdb = tdb_open_log(state_path("group_mapping.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); + if (!tdb) { + DEBUG(0,("Failed to open group mapping database\n")); + return False; +diff -uNr samba-3.0.10.orig/source/include/dynconfig.h samba-3.0.10/source/include/dynconfig.h +--- samba-3.0.10.orig/source/include/dynconfig.h 2004-12-17 03:50:08.000000000 -0800 ++++ samba-3.0.10/source/include/dynconfig.h 2004-12-17 03:55:29.000000000 -0800 +@@ -31,8 +31,12 @@ + extern pstring dyn_CONFIGFILE; + extern pstring dyn_LOGFILEBASE, dyn_LMHOSTSFILE; + extern pstring dyn_LIBDIR; ++extern pstring dyn_CODEPAGEDIR; + extern const fstring dyn_SHLIBEXT; + extern const pstring dyn_LOCKDIR; + extern const pstring dyn_PIDDIR; + extern const pstring dyn_SMB_PASSWD_FILE; + extern const pstring dyn_PRIVATE_DIR; ++ ++char *dyn_STATEDIR(void); ++char *dyn_CACHEDIR(void); +diff -uNr samba-3.0.10.orig/source/intl/lang_tdb.c samba-3.0.10/source/intl/lang_tdb.c +--- samba-3.0.10.orig/source/intl/lang_tdb.c 2004-12-17 03:50:08.000000000 -0800 ++++ samba-3.0.10/source/intl/lang_tdb.c 2004-12-17 03:55:29.000000000 -0800 +@@ -128,7 +128,7 @@ + if (!lang) + return True; + +- asprintf(&msg_path, "%s.msg", lib_path((const char *)lang)); ++ asprintf(&msg_path, "%s.msg", data_path((const char *)lang)); + if (stat(msg_path, &st) != 0) { + /* the msg file isn't available */ + DEBUG(10, ("lang_tdb_init: %s: %s\n", msg_path, +diff -uNr samba-3.0.10.orig/source/lib/account_pol.c samba-3.0.10/source/lib/account_pol.c +--- samba-3.0.10.orig/source/lib/account_pol.c 2004-12-17 03:50:08.000000000 -0800 ++++ samba-3.0.10/source/lib/account_pol.c 2004-12-17 03:55:29.000000000 -0800 +@@ -35,7 +35,7 @@ + + if (tdb) + return True; +- tdb = tdb_open_log(lock_path("account_policy.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); ++ tdb = tdb_open_log(state_path("account_policy.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); + if (!tdb) { + DEBUG(0,("Failed to open account policy database\n")); + return False; +diff -uNr samba-3.0.10.orig/source/lib/util.c samba-3.0.10/source/lib/util.c +--- samba-3.0.10.orig/source/lib/util.c 2004-12-17 03:50:08.000000000 -0800 ++++ samba-3.0.10/source/lib/util.c 2004-12-17 03:55:29.000000000 -0800 +@@ -2362,6 +2362,61 @@ + } + + /** ++ * @brief Returns an absolute path to a file in the Samba data directory. ++ * ++ * @param name File to find, relative to CODEPAGEDIR. ++ * ++ * @retval Pointer to a static #pstring containing the full path. ++ **/ ++ ++char *data_path(const char *name) ++{ ++ static pstring fname; ++ snprintf(fname, sizeof(fname), "%s/%s", dyn_CODEPAGEDIR, name); ++ return fname; ++} ++ ++/***************************************************************** ++a useful function for returning a path in the Samba state directory ++ *****************************************************************/ ++char *state_path(char *name) ++{ ++ static pstring fname; ++ ++ pstrcpy(fname,dyn_STATEDIR()); ++ trim_string(fname,"","/"); ++ ++ if (!directory_exist(fname,NULL)) { ++ mkdir(fname,0755); ++ } ++ ++ pstrcat(fname,"/"); ++ pstrcat(fname,name); ++ ++ return fname; ++} ++ ++/***************************************************************** ++a useful function for returning a path in the Samba cache directory ++ *****************************************************************/ ++char *cache_path(char *name) ++{ ++ static pstring fname; ++ ++ pstrcpy(fname,dyn_CACHEDIR()); ++ trim_string(fname,"","/"); ++ ++ if (!directory_exist(fname,NULL)) { ++ mkdir(fname,0755); ++ } ++ ++ pstrcat(fname,"/"); ++ pstrcat(fname,name); ++ ++ return fname; ++} ++ ++/** + * @brief Returns the platform specific shared library extension. + * + * @retval Pointer to a static #fstring containing the extension. +diff -uNr samba-3.0.10.orig/source/lib/util_unistr.c samba-3.0.10/source/lib/util_unistr.c +--- samba-3.0.10.orig/source/lib/util_unistr.c 2004-12-17 03:50:08.000000000 -0800 ++++ samba-3.0.10/source/lib/util_unistr.c 2004-12-17 03:55:29.000000000 -0800 +@@ -54,8 +54,8 @@ + if (initialised) return; + initialised = 1; + +- upcase_table = map_file(lib_path("upcase.dat"), 0x20000); +- lowcase_table = map_file(lib_path("lowcase.dat"), 0x20000); ++ upcase_table = map_file(data_path("upcase.dat"), 0x20000); ++ lowcase_table = map_file(data_path("lowcase.dat"), 0x20000); + + /* we would like Samba to limp along even if these tables are + not available */ +@@ -161,7 +161,7 @@ + return; + } + +- valid_file = map_file(lib_path("valid.dat"), 0x10000); ++ valid_file = map_file(data_path("valid.dat"), 0x10000); + if (valid_file) { + valid_table = valid_file; + mapped_file = 1; +diff -uNr samba-3.0.10.orig/source/libsmb/samlogon_cache.c samba-3.0.10/source/libsmb/samlogon_cache.c +--- samba-3.0.10.orig/source/libsmb/samlogon_cache.c 2004-12-17 03:50:08.000000000 -0800 ++++ samba-3.0.10/source/libsmb/samlogon_cache.c 2004-12-17 03:55:29.000000000 -0800 +@@ -34,7 +34,7 @@ + BOOL netsamlogon_cache_init(void) + { + if (!netsamlogon_tdb) { +- netsamlogon_tdb = tdb_open_log(lock_path(NETSAMLOGON_TDB), 0, ++ netsamlogon_tdb = tdb_open_log(cache_path(NETSAMLOGON_TDB), 0, + TDB_DEFAULT, O_RDWR | O_CREAT, 0600); + } + +@@ -67,7 +67,7 @@ + winbindd_cache.tdb open. Open the tdb if a NULL is passed. */ + + if (!tdb) { +- tdb = tdb_open_log(lock_path("winbindd_cache.tdb"), 5000, ++ tdb = tdb_open_log(cache_path("winbindd_cache.tdb"), 5000, + TDB_DEFAULT, O_RDWR, 0600); + if (!tdb) { + DEBUG(5, ("netsamlogon_clear_cached_user: failed to open cache\n")); +diff -uNr samba-3.0.10.orig/source/nmbd/nmbd_serverlistdb.c samba-3.0.10/source/nmbd/nmbd_serverlistdb.c +--- samba-3.0.10.orig/source/nmbd/nmbd_serverlistdb.c 2004-12-17 03:50:09.000000000 -0800 ++++ samba-3.0.10/source/nmbd/nmbd_serverlistdb.c 2004-12-17 03:55:29.000000000 -0800 +@@ -327,7 +327,7 @@ + + updatecount++; + +- pstrcpy(fname,lp_lockdir()); ++ pstrcpy(fname,dyn_CACHEDIR()); + trim_char(fname,'\0' ,'/'); + pstrcat(fname,"/"); + pstrcat(fname,SERVER_LIST); +diff -uNr samba-3.0.10.orig/source/nmbd/nmbd_winsserver.c samba-3.0.10/source/nmbd/nmbd_winsserver.c +--- samba-3.0.10.orig/source/nmbd/nmbd_winsserver.c 2004-12-17 03:50:09.000000000 -0800 ++++ samba-3.0.10/source/nmbd/nmbd_winsserver.c 2004-12-17 03:55:30.000000000 -0800 +@@ -234,7 +234,7 @@ + + add_samba_names_to_subnet(wins_server_subnet); + +- if((fp = x_fopen(lock_path(WINS_LIST),O_RDONLY,0)) == NULL) { ++ if((fp = x_fopen(state_path(WINS_LIST),O_RDONLY,0)) == NULL) { + DEBUG(2,("initialise_wins: Can't open wins database file %s. Error was %s\n", + WINS_LIST, strerror(errno) )); + return True; +@@ -1810,7 +1810,7 @@ + } + } + +- slprintf(fname,sizeof(fname)-1,"%s/%s", lp_lockdir(), WINS_LIST); ++ slprintf(fname,sizeof(fname)-1,"%s/%s", dyn_STATEDIR(), WINS_LIST); + all_string_sub(fname,"//", "/", 0); + slprintf(fnamenew,sizeof(fnamenew)-1,"%s.%u", fname, (unsigned int)sys_getpid()); + +diff -uNr samba-3.0.10.orig/source/nsswitch/winbindd_cache.c samba-3.0.10/source/nsswitch/winbindd_cache.c +--- samba-3.0.10.orig/source/nsswitch/winbindd_cache.c 2004-12-17 03:50:09.000000000 -0800 ++++ samba-3.0.10/source/nsswitch/winbindd_cache.c 2004-12-17 03:55:30.000000000 -0800 +@@ -57,7 +57,7 @@ + if (opt_nocache) + return; + +- wcache->tdb = tdb_open_log(lock_path("winbindd_cache.tdb"), 5000, ++ wcache->tdb = tdb_open_log(cache_path("winbindd_cache.tdb"), 5000, + TDB_CLEAR_IF_FIRST, O_RDWR|O_CREAT, 0600); + + if (!wcache->tdb) { +diff -uNr samba-3.0.10.orig/source/nsswitch/winbindd_util.c samba-3.0.10/source/nsswitch/winbindd_util.c +--- samba-3.0.10.orig/source/nsswitch/winbindd_util.c 2004-12-17 03:50:09.000000000 -0800 ++++ samba-3.0.10/source/nsswitch/winbindd_util.c 2004-12-17 03:55:30.000000000 -0800 +@@ -957,7 +957,7 @@ + SMB_STRUCT_STAT stbuf; + TDB_CONTEXT *idmap_tdb; + +- pstrcpy(idmap_name, lock_path("winbindd_idmap.tdb")); ++ pstrcpy(idmap_name, state_path("winbindd_idmap.tdb")); + + if (!file_exist(idmap_name, &stbuf)) { + /* nothing to convert return */ +diff -uNr samba-3.0.10.orig/source/param/loadparm.c samba-3.0.10/source/param/loadparm.c +--- samba-3.0.10.orig/source/param/loadparm.c 2004-12-17 03:50:09.000000000 -0800 ++++ samba-3.0.10/source/param/loadparm.c 2004-12-17 03:55:30.000000000 -0800 +@@ -104,6 +104,9 @@ + char *szAddPrinterCommand; + char *szDeletePrinterCommand; + char *szOs2DriverMap; ++#ifdef FHS_COMPATIBLE ++ char *szLockDirStub; ++#endif + char *szLockDir; + char *szPidDir; + char *szRootdir; +@@ -1105,8 +1108,13 @@ + {"config file", P_STRING, P_GLOBAL, &Globals.szConfigFile, NULL, NULL, FLAG_HIDE}, + {"preload", P_STRING, P_GLOBAL, &Globals.szAutoServices, NULL, NULL, FLAG_ADVANCED}, + {"auto services", P_STRING, P_GLOBAL, &Globals.szAutoServices, NULL, NULL, FLAG_ADVANCED}, ++#ifdef FHS_COMPATIBLE ++ {"lock directory", P_STRING, P_GLOBAL, &Globals.szLockDirStub, NULL, NULL, 0}, ++ {"lock dir", P_STRING, P_GLOBAL, &Globals.szLockDirStub, NULL, NULL, 0}, ++#else + {"lock directory", P_STRING, P_GLOBAL, &Globals.szLockDir, NULL, NULL, FLAG_ADVANCED}, + {"lock dir", P_STRING, P_GLOBAL, &Globals.szLockDir, NULL, NULL, FLAG_HIDE}, ++#endif + {"pid directory", P_STRING, P_GLOBAL, &Globals.szPidDir, NULL, NULL, FLAG_ADVANCED}, + #ifdef WITH_UTMP + {"utmp directory", P_STRING, P_GLOBAL, &Globals.szUtmpDir, NULL, NULL, FLAG_ADVANCED}, +diff -uNr samba-3.0.10.orig/source/passdb/pdb_tdb.c samba-3.0.10/source/passdb/pdb_tdb.c +--- samba-3.0.10.orig/source/passdb/pdb_tdb.c 2004-12-17 03:50:09.000000000 -0800 ++++ samba-3.0.10/source/passdb/pdb_tdb.c 2004-12-17 03:55:30.000000000 -0800 +@@ -734,10 +734,7 @@ + if (location) { + tdb_state->tdbsam_location = talloc_strdup(pdb_context->mem_ctx, location); + } else { +- pstring tdbfile; +- get_private_directory(tdbfile); +- pstrcat(tdbfile, "/"); +- pstrcat(tdbfile, PASSDB_FILE_NAME); ++ char *tdbfile = state_path(PASSDB_FILE_NAME); + tdb_state->tdbsam_location = talloc_strdup(pdb_context->mem_ctx, tdbfile); + } + +diff -uNr samba-3.0.10.orig/source/passdb/secrets.c samba-3.0.10/source/passdb/secrets.c +--- samba-3.0.10.orig/source/passdb/secrets.c 2004-12-17 03:50:09.000000000 -0800 ++++ samba-3.0.10/source/passdb/secrets.c 2004-12-17 03:55:30.000000000 -0800 +@@ -55,8 +55,7 @@ + if (tdb) + return True; + +- pstrcpy(fname, lp_private_dir()); +- pstrcat(fname,"/secrets.tdb"); ++ pstrcpy(fname, state_path("secrets.tdb")); + + tdb = tdb_open_log(fname, 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); + +diff -uNr samba-3.0.10.orig/source/printing/nt_printing.c samba-3.0.10/source/printing/nt_printing.c +--- samba-3.0.10.orig/source/printing/nt_printing.c 2004-12-17 03:50:09.000000000 -0800 ++++ samba-3.0.10/source/printing/nt_printing.c 2004-12-17 03:55:31.000000000 -0800 +@@ -298,28 +298,28 @@ + + if (tdb_drivers) + tdb_close(tdb_drivers); +- tdb_drivers = tdb_open_log(lock_path("ntdrivers.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); ++ tdb_drivers = tdb_open_log(state_path("ntdrivers.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); + if (!tdb_drivers) { + DEBUG(0,("nt_printing_init: Failed to open nt drivers database %s (%s)\n", +- lock_path("ntdrivers.tdb"), strerror(errno) )); ++ state_path("ntdrivers.tdb"), strerror(errno) )); + return False; + } + + if (tdb_printers) + tdb_close(tdb_printers); +- tdb_printers = tdb_open_log(lock_path("ntprinters.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); ++ tdb_printers = tdb_open_log(state_path("ntprinters.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); + if (!tdb_printers) { + DEBUG(0,("nt_printing_init: Failed to open nt printers database %s (%s)\n", +- lock_path("ntprinters.tdb"), strerror(errno) )); ++ state_path("ntprinters.tdb"), strerror(errno) )); + return False; + } + + if (tdb_forms) + tdb_close(tdb_forms); +- tdb_forms = tdb_open_log(lock_path("ntforms.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); ++ tdb_forms = tdb_open_log(state_path("ntforms.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); + if (!tdb_forms) { + DEBUG(0,("nt_printing_init: Failed to open nt forms database %s (%s)\n", +- lock_path("ntforms.tdb"), strerror(errno) )); ++ state_path("ntforms.tdb"), strerror(errno) )); + return False; + } + +diff -uNr samba-3.0.10.orig/source/printing/printing.c samba-3.0.10/source/printing/printing.c +--- samba-3.0.10.orig/source/printing/printing.c 2004-12-17 03:50:09.000000000 -0800 ++++ samba-3.0.10/source/printing/printing.c 2004-12-17 03:55:31.000000000 -0800 +@@ -177,8 +177,8 @@ + int services = lp_numservices(); + int snum; + +- unlink(lock_path("printing.tdb")); +- pstrcpy(printing_path,lock_path("printing")); ++ unlink(cache_path("printing.tdb")); ++ pstrcpy(printing_path,cache_path("printing")); + mkdir(printing_path,0755); + + /* handle a Samba upgrade */ +diff -uNr samba-3.0.10.orig/source/printing/printing_db.c samba-3.0.10/source/printing/printing_db.c +--- samba-3.0.10.orig/source/printing/printing_db.c 2004-12-17 03:50:09.000000000 -0800 ++++ samba-3.0.10/source/printing/printing_db.c 2004-12-17 03:55:31.000000000 -0800 +@@ -89,7 +89,7 @@ + DLIST_ADD(print_db_head, p); + } + +- pstrcpy(printdb_path, lock_path("printing/")); ++ pstrcpy(printdb_path, cache_path("printing/")); + pstrcat(printdb_path, printername); + pstrcat(printdb_path, ".tdb"); + +diff -uNr samba-3.0.20b.orig/source/registry/reg_db.c samba-3.0.20b/source/registry/reg_db.c +--- samba-3.0.20b.orig/source/registry/reg_db.c 2003-07-02 23:26:47.000000000 -0500 ++++ samba-3.0.20b/source/registry/reg_db.c 2003-07-02 23:19:02.000000000 -0500 +@@ -198,13 +198,13 @@ + if ( tdb_reg ) + return True; + +- if ( !(tdb_reg = tdb_open_log(lock_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600)) ) ++ if ( !(tdb_reg = tdb_open_log(state_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600)) ) + { +- tdb_reg = tdb_open_log(lock_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); ++ tdb_reg = tdb_open_log(state_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); + if ( !tdb_reg ) { + DEBUG(0,("init_registry: Failed to open registry %s (%s)\n", +- lock_path("registry.tdb"), strerror(errno) )); ++ state_path("registry.tdb"), strerror(errno) )); + return False; + } + + DEBUG(10,("init_registry: Successfully created registry tdb\n")); +diff -uNr samba-3.0.10.orig/source/rpc_server/srv_srvsvc_nt.c samba-3.0.10/source/rpc_server/srv_srvsvc_nt.c +--- samba-3.0.10.orig/source/rpc_server/srv_srvsvc_nt.c 2004-12-17 03:50:09.000000000 -0800 ++++ samba-3.0.10/source/rpc_server/srv_srvsvc_nt.c 2004-12-17 03:55:31.000000000 -0800 +@@ -133,10 +133,10 @@ + + if (share_tdb && local_pid == sys_getpid()) + return True; +- share_tdb = tdb_open_log(lock_path("share_info.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); ++ share_tdb = tdb_open_log(state_path("share_info.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); + if (!share_tdb) { + DEBUG(0,("Failed to open share info database %s (%s)\n", +- lock_path("share_info.tdb"), strerror(errno) )); ++ state_path("share_info.tdb"), strerror(errno) )); + return False; + } + +diff -uNr samba-3.0.10.orig/source/sam/idmap_tdb.c samba-3.0.10/source/sam/idmap_tdb.c +--- samba-3.0.10.orig/source/sam/idmap_tdb.c 2004-12-17 03:50:09.000000000 -0800 ++++ samba-3.0.10/source/sam/idmap_tdb.c 2004-12-17 03:55:31.000000000 -0800 +@@ -487,7 +487,7 @@ + BOOL tdb_is_new = False; + + /* use the old database if present */ +- tdbfile = SMB_STRDUP(lock_path("winbindd_idmap.tdb")); ++ tdbfile = SMB_STRDUP(state_path("winbindd_idmap.tdb")); + if (!tdbfile) { + DEBUG(0, ("idmap_init: out of memory!\n")); + return NT_STATUS_NO_MEMORY; +diff -uNr samba-3.0.10.orig/source/smbd/lanman.c samba-3.0.10/source/smbd/lanman.c +--- samba-3.0.10.orig/source/smbd/lanman.c 2004-12-17 03:50:10.000000000 -0800 ++++ samba-3.0.10/source/smbd/lanman.c 2004-12-17 03:55:31.000000000 -0800 +@@ -969,9 +969,9 @@ + BOOL local_list_only; + int i; + +- lines = file_lines_load(lock_path(SERVER_LIST), NULL); ++ lines = file_lines_load(cache_path(SERVER_LIST), NULL); + if (!lines) { +- DEBUG(4,("Can't open %s - %s\n",lock_path(SERVER_LIST),strerror(errno))); ++ DEBUG(4,("Can't open %s - %s\n",cache_path(SERVER_LIST),strerror(errno))); + return(0); + } + +diff -uNr samba-3.0.10.orig/source/utils/net_idmap.c samba-3.0.10/source/utils/net_idmap.c +--- samba-3.0.10.orig/source/utils/net_idmap.c 2004-12-17 03:50:10.000000000 -0800 ++++ samba-3.0.10/source/utils/net_idmap.c 2004-12-17 03:55:32.000000000 -0800 +@@ -126,7 +126,7 @@ + return NT_STATUS_UNSUCCESSFUL; + } + +- tdbfile = SMB_STRDUP(lock_path("winbindd_idmap.tdb")); ++ tdbfile = SMB_STRDUP(state_path("winbindd_idmap.tdb")); + if (!tdbfile) { + DEBUG(0, ("idmap_init: out of memory!\n")); + return NT_STATUS_NO_MEMORY; +diff -uNr samba-3.0.10.orig/source/wrepld/process.c samba-3.0.10/source/wrepld/process.c +--- samba-3.0.10.orig/source/wrepld/process.c 2004-12-17 03:50:10.000000000 -0800 ++++ samba-3.0.10/source/wrepld/process.c 2004-12-17 03:55:32.000000000 -0800 +@@ -197,7 +197,7 @@ + { + TDB_CONTEXT *tdb; + +- tdb = tdb_open_log(lock_path(WINS_LIST), 0, TDB_DEFAULT, O_RDONLY, 0600); ++ tdb = tdb_open_log(state_path(WINS_LIST), 0, TDB_DEFAULT, O_RDONLY, 0600); + if (!tdb) { + DEBUG(2,("get_our_last_id: Can't open wins database file %s. Error was %s\n", WINS_LIST, strerror(errno) )); + return; +@@ -489,7 +489,7 @@ + } + + +- tdb = tdb_open_log(lock_path(WINS_LIST), 0, TDB_DEFAULT, O_RDONLY, 0600); ++ tdb = tdb_open_log(state_path(WINS_LIST), 0, TDB_DEFAULT, O_RDONLY, 0600); + if (!tdb) { + DEBUG(2,("send_entry_request: Can't open wins database file %s. Error was %s\n", WINS_LIST, strerror(errno) )); + return; +diff -uNr samba-3.0.11.orig/source/printing/nt_printing.c samba-3.0.11/source/printing/nt_printing.c +--- samba-3.0.11.orig/source/printing/nt_printing.c 2005-03-23 02:51:08.000000000 -0800 ++++ samba-3.0.11/source/printing/nt_printing.c 2005-03-23 02:54:33.000000000 -0800 +@@ -2065,7 +2065,7 @@ + close_all_print_db(); + + if (geteuid() == 0) { +- pstrcpy(printdb_path, lock_path("printing/")); ++ pstrcpy(printdb_path, cache_path("printing/")); + pstrcat(printdb_path, sharename); + pstrcat(printdb_path, ".tdb"); + diff --git a/packaging/Debian/debian-sarge/patches/installswat.sh.patch b/packaging/Debian/debian-sarge/patches/installswat.sh.patch new file mode 100644 index 0000000000..81e3dcd444 --- /dev/null +++ b/packaging/Debian/debian-sarge/patches/installswat.sh.patch @@ -0,0 +1,15 @@ +--- samba-3.0.1/source/script/installswat.sh.orig 2004-01-13 13:43:42.000000000 -0500 ++++ samba-3.0.1/source/script/installswat.sh 2004-01-13 12:56:49.000000000 -0500 +@@ -114,7 +114,11 @@ + + # Install Using Samba book (but only if it is there) + +-if [ "x$BOOKDIR" != "x" -a -f $SRCDIR../docs/htmldocs/using_samba/toc.html ]; then ++# Under Debian we don't actually install the book. The book is part of ++# the samba-doc package, so we just provide a symlink that points to ++# where the book is actually installed. The symlink is created in ++# debian/rules. ++if /bin/false; then + + # Create directories + diff --git a/packaging/Debian/debian-sarge/patches/make-distclean.patch b/packaging/Debian/debian-sarge/patches/make-distclean.patch new file mode 100644 index 0000000000..e859575290 --- /dev/null +++ b/packaging/Debian/debian-sarge/patches/make-distclean.patch @@ -0,0 +1,27 @@ +diff -uNr samba-3.0.7.orig/source/Makefile.in samba-3.0.7/source/Makefile.in +--- samba-3.0.7.orig/source/Makefile.in 2004-10-25 10:06:08.000000000 -0700 ++++ samba-3.0.7/source/Makefile.in 2004-10-25 10:03:31.000000000 -0700 +@@ -1371,6 +1371,7 @@ + + python_clean: + @-if test -n "$(PYTHON)"; then $(PYTHON) python/setup.py clean; fi ++ @-rm -rf build/ + + # revert to the previously installed version + revert: +@@ -1437,6 +1438,7 @@ + @rm -f include/proto.h include/build_env.h include/wrepld_proto.h \ + nsswitch/winbindd_proto.h web/swat_proto.h \ + client/client_proto.h utils/net_proto.h \ ++ utils/ntlm_auth_proto.h \ + smbd/build_options.c + + MKPROTO_SH = $(srcdir)/script/mkproto.sh +@@ -1512,6 +1514,7 @@ + + distclean: realclean + -rm -f include/stamp-h ++ -rm -f script/gen-8bit-gap.sh smbadduser + -rm -f include/config.h Makefile + -rm -f config.status config.cache so_locations + -rm -rf .deps TAGS diff --git a/packaging/Debian/debian-stable/patches/nmbd-signalling.patch b/packaging/Debian/debian-sarge/patches/nmbd-signalling.patch index ca04cce3bf..ca04cce3bf 100644 --- a/packaging/Debian/debian-stable/patches/nmbd-signalling.patch +++ b/packaging/Debian/debian-sarge/patches/nmbd-signalling.patch diff --git a/packaging/Debian/debian-sarge/patches/non-linux-ports.patch b/packaging/Debian/debian-sarge/patches/non-linux-ports.patch new file mode 100644 index 0000000000..ac2ee1dcf5 --- /dev/null +++ b/packaging/Debian/debian-sarge/patches/non-linux-ports.patch @@ -0,0 +1,62 @@ +diff -uNr samba-3.0.11.orig/source/configure.in samba-3.0.11/source/configure.in +--- samba-3.0.11.orig/source/configure.in 2005-03-23 02:39:11.000000000 -0800 ++++ samba-3.0.11/source/configure.in 2005-03-23 02:43:01.000000000 -0800 +@@ -573,6 +573,15 @@ + fi + ;; + ++# Systems with LFS support. ++# ++ gnu* | k*bsd*-gnu) ++ CPPFLAGS="-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE $CPPFLAGS" ++ AC_DEFINE(_LARGEFILE64_SOURCE, 1, [Whether to enable large file support]) ++ AC_DEFINE(_FILE_OFFSET_BITS, 64, [File offset bits]) ++ AC_DEFINE(_GNU_SOURCE, 1, [Whether to use GNU libc extensions]) ++ ;; ++ + # Tests for linux LFS support. Need kernel 2.4 and glibc2.2 or greater support. + # + *linux*) +@@ -1040,7 +1049,7 @@ + # + # + case "$host_os" in +- *linux*) ++ linux*-gnu* | gnu* | k*bsd*-gnu) + # glibc <= 2.3.2 has a broken getgrouplist + AC_TRY_RUN([ + #include <unistd.h> +@@ -1172,7 +1181,10 @@ + + # and these are for particular systems + case "$host_os" in +- *linux*) AC_DEFINE(LINUX,1,[Whether the host os is linux]) ++ linux*-gnu* | gnu* | k*bsd*-gnu) ++ case "$host_os" in linux*) ++ AC_DEFINE(LINUX,1,[Whether the host os is linux]) ;; ++ esac + BLDSHARED="true" + if test "${ac_cv_gnu_ld_no_default_allow_shlib_undefined}" = "yes"; then + LDSHFLAGS="-shared -Wl,-Bsymbolic -Wl,--allow-shlib-undefined" +@@ -4044,7 +4056,7 @@ + AC_MSG_RESULT(yes); + + case "$host_os" in +- *linux*) ++ linux*-gnu* | gnu* | k*bsd*-gnu) + AC_CACHE_CHECK([for linux sendfile64 support],samba_cv_HAVE_SENDFILE64,[ + AC_TRY_LINK([#include <sys/sendfile.h>], + [\ +@@ -4307,10 +4319,10 @@ + WINBIND_NSS_LDSHFLAGS=$LDSHFLAGS + + case "$host_os" in +- *linux*) ++ linux*-gnu* | gnu* | k*bsd*-gnu) + WINBIND_NSS_EXTRA_OBJS="nsswitch/winbind_nss_linux.o" + ;; +- *freebsd[[5-9]]*) ++ freebsd5*|*freebsd[[6-9]]*) + # FreeBSD winbind client is implemented as a wrapper around + # the Linux version. + WINBIND_NSS_EXTRA_OBJS="nsswitch/winbind_nss_freebsd.o \ diff --git a/packaging/Debian/debian-sarge/patches/samba.patch b/packaging/Debian/debian-sarge/patches/samba.patch new file mode 100644 index 0000000000..f4c8ca8742 --- /dev/null +++ b/packaging/Debian/debian-sarge/patches/samba.patch @@ -0,0 +1,64 @@ +diff -uNr samba-3.0.0beta1.orig/source/client/smbmount.c samba-3.0.0beta1/source/client/smbmount.c +--- samba-3.0.0beta1.orig/source/client/smbmount.c 2003-06-07 12:57:32.000000000 -0500 ++++ samba-3.0.0beta1/source/client/smbmount.c 2003-06-30 20:12:22.000000000 -0500 +@@ -766,7 +766,7 @@ + *lp = 0; + pstrcpy(password,lp+1); + got_pass = True; +- memset(strchr_m(opteq+1,'%')+1,'X',strlen(password)); ++ memset(strchr_m(opteq+1,'%')+1,'\0',strlen(password)); + } + if ((lp=strchr_m(username,'/'))) { + *lp = 0; +@@ -776,7 +776,7 @@ + !strcmp(opts, "password")) { + pstrcpy(password,opteq+1); + got_pass = True; +- memset(opteq+1,'X',strlen(password)); ++ memset(opteq+1,'\0',strlen(password)); + } else if(!strcmp(opts, "credentials")) { + pstrcpy(credentials,opteq+1); + } else if(!strcmp(opts, "netbiosname")) { +@@ -890,7 +902,7 @@ + *p = 0; + pstrcpy(password,p+1); + got_pass = True; +- memset(strchr_m(getenv("USER"),'%')+1,'X',strlen(password)); ++ memset(strchr_m(getenv("USER"),'%')+1,'\0',strlen(password)); + } + strupper_m(username); + } +diff -uNr samba-3.0.0beta1.orig/source/web/diagnose.c samba-3.0.0beta1/source/web/diagnose.c +--- samba-3.0.0beta1.orig/source/web/diagnose.c 2003-06-07 12:57:41.000000000 -0500 ++++ samba-3.0.0beta1/source/web/diagnose.c 2003-06-30 20:12:22.000000000 -0500 +@@ -66,6 +66,7 @@ + static struct cli_state cli; + extern struct in_addr loopback_ip; + ++ loopback_ip.s_addr = htonl((127 << 24) + 1); + if (!cli_initialise(&cli)) + return False; + +--- samba-3.0.1/source/script/installbin.sh.orig 2003-10-10 14:08:36.000000000 -0400 ++++ samba-3.0.1/source/script/installbin.sh 2003-12-17 10:51:45.000000000 -0500 +@@ -24,12 +24,14 @@ + chmod $INSTALLPERMS $BINDIR/$p2 + + # this is a special case, mount needs this in a specific location +- if [ $p2 = smbmount ]; then +- if [ ! -d $DESTDIR/sbin ]; then +- mkdir $DESTDIR/sbin +- fi +- ln -sf $BINDIR/$p2 $DESTDIR/sbin/mount.smbfs +- fi ++# Commented out for the Debian Samba package. We take care of this ++# important symlink in debian/rules. (peloy@debian.org) ++# if [ $p2 = smbmount ]; then ++# if [ ! -d $DESTDIR/sbin ]; then ++# mkdir $DESTDIR/sbin ++# fi ++# ln -sf $BINDIR/$p2 $DESTDIR/sbin/mount.smbfs ++# fi + done + + diff --git a/packaging/Debian/debian-stable/patches/smbclient-pager.patch b/packaging/Debian/debian-sarge/patches/smbclient-pager.patch index 3ee85d4118..3ee85d4118 100644 --- a/packaging/Debian/debian-stable/patches/smbclient-pager.patch +++ b/packaging/Debian/debian-sarge/patches/smbclient-pager.patch diff --git a/packaging/Debian/debian-stable/patches/smbclient-tar.patch.unused b/packaging/Debian/debian-sarge/patches/smbclient-tar.patch.unused index e2a4c3ce2c..e2a4c3ce2c 100644 --- a/packaging/Debian/debian-stable/patches/smbclient-tar.patch.unused +++ b/packaging/Debian/debian-sarge/patches/smbclient-tar.patch.unused diff --git a/packaging/Debian/debian-stable/patches/smbmount-mtab-flags.patch b/packaging/Debian/debian-sarge/patches/smbmount-mtab-flags.patch index dac999dd63..dac999dd63 100644 --- a/packaging/Debian/debian-stable/patches/smbmount-mtab-flags.patch +++ b/packaging/Debian/debian-sarge/patches/smbmount-mtab-flags.patch diff --git a/packaging/Debian/debian-sarge/patches/smbmount-nomtab.patch b/packaging/Debian/debian-sarge/patches/smbmount-nomtab.patch new file mode 100644 index 0000000000..f7e9ce4f69 --- /dev/null +++ b/packaging/Debian/debian-sarge/patches/smbmount-nomtab.patch @@ -0,0 +1,160 @@ +diff -uNr samba-3.0alpha22.orig/source/client/smbmnt.c samba-3.0alpha22/source/client/smbmnt.c +--- samba-3.0alpha22.orig/source/client/smbmnt.c 2003-03-15 12:11:39.000000000 -0600 ++++ samba-3.0alpha22/source/client/smbmnt.c 2003-03-15 12:11:49.000000000 -0600 +@@ -28,6 +28,7 @@ + static uid_t mount_uid; + static gid_t mount_gid; + static int mount_ro; ++static int no_mtab; + static unsigned mount_fmask; + static unsigned mount_dmask; + static int user_mount; +@@ -40,6 +41,7 @@ + printf("Usage: smbmnt mount-point [options]\n"); + printf("Version %s\n\n",VERSION); + printf("-s share share name on server\n" ++ "-n don't update /etc/mtab\n" + "-r mount read-only\n" + "-u uid mount as uid\n" + "-g gid mount as gid\n" +@@ -54,7 +56,7 @@ + { + int opt; + +- while ((opt = getopt (argc, argv, "s:u:g:rf:d:o:")) != EOF) ++ while ((opt = getopt (argc, argv, "s:u:g:nrf:d:o:")) != EOF) + { + switch (opt) + { +@@ -71,6 +73,9 @@ + mount_gid = strtol(optarg, NULL, 0); + } + break; ++ case 'n': ++ no_mtab = 1; ++ break; + case 'r': + mount_ro = 1; + break; +@@ -274,36 +279,38 @@ + return -1; + } + +- if ((fd = open(MOUNTED"~", O_RDWR|O_CREAT|O_EXCL, 0600)) == -1) +- { +- fprintf(stderr, "Can't get "MOUNTED"~ lock file"); +- return 1; +- } +- close(fd); ++ if (!no_mtab) { ++ if ((fd = open(MOUNTED"~", O_RDWR|O_CREAT|O_EXCL, 0600)) == -1) ++ { ++ fprintf(stderr, "Can't get "MOUNTED"~ lock file"); ++ return 1; ++ } ++ close(fd); + +- if ((mtab = setmntent(MOUNTED, "a+")) == NULL) +- { +- fprintf(stderr, "Can't open " MOUNTED); +- return 1; +- } ++ if ((mtab = setmntent(MOUNTED, "a+")) == NULL) ++ { ++ fprintf(stderr, "Can't open " MOUNTED); ++ return 1; ++ } + +- if (addmntent(mtab, &ment) == 1) +- { +- fprintf(stderr, "Can't write mount entry"); +- return 1; +- } +- if (fchmod(fileno(mtab), 0644) == -1) +- { +- fprintf(stderr, "Can't set perms on "MOUNTED); +- return 1; +- } +- endmntent(mtab); ++ if (addmntent(mtab, &ment) == 1) ++ { ++ fprintf(stderr, "Can't write mount entry"); ++ return 1; ++ } ++ if (fchmod(fileno(mtab), 0644) == -1) ++ { ++ fprintf(stderr, "Can't set perms on "MOUNTED); ++ return 1; ++ } ++ endmntent(mtab); + +- if (unlink(MOUNTED"~") == -1) +- { +- fprintf(stderr, "Can't remove "MOUNTED"~"); +- return 1; +- } ++ if (unlink(MOUNTED"~") == -1) ++ { ++ fprintf(stderr, "Can't remove "MOUNTED"~"); ++ return 1; ++ } ++ } + + return 0; + } +diff -uNr samba-3.0alpha22.orig/source/client/smbmount.c samba-3.0alpha22/source/client/smbmount.c +--- samba-3.0alpha22.orig/source/client/smbmount.c 2003-03-15 12:04:29.000000000 -0600 ++++ samba-3.0alpha22/source/client/smbmount.c 2003-03-15 12:15:10.000000000 -0600 +@@ -48,6 +48,7 @@ + static int mount_ro; + static unsigned mount_fmask; + static unsigned mount_dmask; ++static BOOL no_mtab = False; + static BOOL use_kerberos; + /* TODO: Add code to detect smbfs version in kernel */ + static BOOL status32_smbfs = False; +@@ -273,6 +274,9 @@ + return; + } + ++ if (no_mtab) ++ return; ++ + if ((fd = open(MOUNTED"~", O_RDWR|O_CREAT|O_EXCL, 0600)) == -1) { + DEBUG(0,("%d: Can't get "MOUNTED"~ lock file", sys_getpid())); + return; +@@ -467,6 +471,9 @@ + args[i++] = "-s"; + args[i++] = svc2; + ++ if (no_mtab) { ++ args[i++] = "-n"; ++ } + if (mount_ro) { + args[i++] = "-r"; + } +@@ -662,7 +669,7 @@ + ****************************************************************************/ + static void usage(void) + { +- printf("Usage: mount.smbfs service mountpoint [-o options,...]\n"); ++ printf("Usage: mount.smbfs service mountpoint [-n] [-o options,...]\n"); + + printf("Version %s\n\n",VERSION); + +@@ -740,8 +747,13 @@ + argc -= 2; + argv += 2; + +- opt = getopt(argc, argv, "o:"); +- if(opt != 'o') { ++ opt = getopt(argc, argv, "no:"); ++ if (opt == 'n') { ++ DEBUG(3,("No mtab!\n")); ++ no_mtab = True; ++ opt = getopt(argc, argv, "o:"); ++ } ++ if (opt != 'o') { + return; + } + diff --git a/packaging/Debian/debian-sarge/patches/smbstatus-locking.patch b/packaging/Debian/debian-sarge/patches/smbstatus-locking.patch new file mode 100644 index 0000000000..db7fccc68b --- /dev/null +++ b/packaging/Debian/debian-sarge/patches/smbstatus-locking.patch @@ -0,0 +1,20 @@ +diff -uNr samba-2.999+3.0.alpha21.orig/source/utils/status.c samba-2.999+3.0.alpha21/source/utils/status.c +--- samba-2.999+3.0.alpha21.orig/source/utils/status.c 2002-11-26 20:54:22.000000000 -0600 ++++ samba-2.999+3.0.alpha21/source/utils/status.c 2002-12-16 23:37:14.000000000 -0600 +@@ -686,6 +686,16 @@ + if (!shares_only) { + int ret; + ++ tdb = tdb_open_log(lock_path("locking.tdb"), 0, TDB_DEFAULT, O_RDONLY, 0); ++ ++ if (!tdb) { ++ d_printf("%s not initialised\n", lock_path("locking.tdb")); ++ d_printf("This is normal if an SMB client has never connected to your server.\n"); ++ exit(0); ++ } else { ++ tdb_close(tdb); ++ } ++ + if (!locking_init(1)) { + d_printf("Can't initialise locking module - exiting\n"); + exit(1); diff --git a/packaging/Debian/debian-sarge/patches/undefined-symbols.patch b/packaging/Debian/debian-sarge/patches/undefined-symbols.patch new file mode 100644 index 0000000000..e9a376ea9b --- /dev/null +++ b/packaging/Debian/debian-sarge/patches/undefined-symbols.patch @@ -0,0 +1,22 @@ +diff -uNr samba-3.0.11.orig/source/Makefile.in samba-3.0.11/source/Makefile.in +--- samba-3.0.11.orig/source/Makefile.in 2005-03-23 02:40:40.000000000 -0800 ++++ samba-3.0.11/source/Makefile.in 2005-03-23 02:48:59.000000000 -0800 +@@ -631,7 +631,8 @@ + $(RPC_ECHO_OBJ) $(SMBLDAP_OBJ) $(IDMAP_OBJ) libsmb/spnego.o $(PASSCHANGE_OBJ) + + WINBIND_WINS_NSS_OBJ = nsswitch/wins.o $(PARAM_OBJ) \ +- $(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) $(NSSWINS_OBJ) $(KRBCLIENT_OBJ) ++ $(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) $(NSSWINS_OBJ) $(KRBCLIENT_OBJ) \ ++ $(SECRETS_OBJ) + + WINBIND_WINS_NSS_PICOBJS = $(WINBIND_WINS_NSS_OBJ:.o=.@PICSUFFIX@) + +@@ -997,7 +998,7 @@ + + bin/libsmbclient.@SHLIBEXT@: $(LIBSMBCLIENT_PICOBJS) + @echo Linking libsmbclient shared library $@ +- @$(SHLD) $(LDSHFLAGS) -o $@ $(LIBSMBCLIENT_PICOBJS) $(LDFLAGS) $(LIBS) \ ++ @$(SHLD) $(LDSHFLAGS) -Wl,-z,defs -o $@ $(LIBSMBCLIENT_PICOBJS) $(LDFLAGS) $(LIBS) \ + $(KRB5LIBS) $(LDAP_LIBS) \ + @SONAMEFLAG@`basename $@`.$(LIBSMBCLIENT_MAJOR) + diff --git a/packaging/Debian/debian-sarge/patches/version-fix-vscan.patch b/packaging/Debian/debian-sarge/patches/version-fix-vscan.patch new file mode 100644 index 0000000000..0f35598297 --- /dev/null +++ b/packaging/Debian/debian-sarge/patches/version-fix-vscan.patch @@ -0,0 +1,37 @@ +Author: Lars Mueller <lmuelle at SuSE dot de> +Subject: Non integer SAMBA_VERSION_RELEASE breaks samba-vscan build +Bugzilla: bugzilla.Samba.org #2618 + +--- samba-3.0.20b/source/script/mkversion.sh ++++ samba-3.0.20b/source/script/mkversion.sh 2005-10-22 12:56:30 +@@ -17,6 +17,7 @@ + SAMBA_VERSION_MAJOR=`sed -n 's/^SAMBA_VERSION_MAJOR=//p' $SOURCE_DIR$VERSION_FILE` + SAMBA_VERSION_MINOR=`sed -n 's/^SAMBA_VERSION_MINOR=//p' $SOURCE_DIR$VERSION_FILE` + SAMBA_VERSION_RELEASE=`sed -n 's/^SAMBA_VERSION_RELEASE=//p' $SOURCE_DIR$VERSION_FILE` ++SAMBA_VERSION_RELEASE_SUFFIX=`sed -n 's/^SAMBA_VERSION_RELEASE_SUFFIX=//p' $SOURCE_DIR$VERSION_FILE` + + SAMBA_VERSION_PRE_RELEASE=`sed -n 's/^SAMBA_VERSION_PRE_RELEASE=//p' $SOURCE_DIR$VERSION_FILE` + +@@ -31,9 +32,10 @@ + echo "#define SAMBA_VERSION_MAJOR ${SAMBA_VERSION_MAJOR}" >> $OUTPUT_FILE + echo "#define SAMBA_VERSION_MINOR ${SAMBA_VERSION_MINOR}" >> $OUTPUT_FILE + echo "#define SAMBA_VERSION_RELEASE ${SAMBA_VERSION_RELEASE}" >> $OUTPUT_FILE ++echo "#define SAMBA_VERSION_RELEASE_SUFFIX ${SAMBA_VERSION_RELEASE_SUFFIX}" >> $OUTPUT_FILE + + +-SAMBA_VERSION_STRING="${SAMBA_VERSION_MAJOR}.${SAMBA_VERSION_MINOR}.${SAMBA_VERSION_RELEASE}" ++SAMBA_VERSION_STRING="${SAMBA_VERSION_MAJOR}.${SAMBA_VERSION_MINOR}.${SAMBA_VERSION_RELEASE}${SAMBA_VERSION_RELEASE_SUFFIX}" + + + if test -n "${SAMBA_VERSION_PRE_RELEASE}";then +--- samba-3.0.20b/source/VERSION ++++ samba-3.0.20b/source/VERSION 2005-10-22 12:56:30 +@@ -19,7 +19,8 @@ + ######################################################## + SAMBA_VERSION_MAJOR=3 + SAMBA_VERSION_MINOR=0 + SAMBA_VERSION_RELEASE=20 ++SAMBA_VERSION_RELEASE_SUFFIX=b + + ######################################################## + # For 'pre' releases the version will be # diff --git a/packaging/Debian/debian-stable/po/POTFILES.in b/packaging/Debian/debian-sarge/po/POTFILES.in index 95a7ea8150..95a7ea8150 100644 --- a/packaging/Debian/debian-stable/po/POTFILES.in +++ b/packaging/Debian/debian-sarge/po/POTFILES.in diff --git a/packaging/Debian/debian-sarge/po/ca.po b/packaging/Debian/debian-sarge/po/ca.po new file mode 100644 index 0000000000..c3cdc11aea --- /dev/null +++ b/packaging/Debian/debian-sarge/po/ca.po @@ -0,0 +1,291 @@ +# samba (debconf) translation to Catalan. +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. +# Aleix Badia i Bosch <abadia@ica.es> 2004 +# +msgid "" +msgstr "" +"Project-Id-Version: samba_3.0.0beta2-1_templates\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2003-08-30 19:08-0500\n" +"PO-Revision-Date: 2004-03-13 21:32-0500\n" +"Last-Translator: Steve Langasek <vorlon@debian.org>\n" +"Language-Team: Debian L10n Catalan <debian-l10n-catalan@lists.debian.org>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=ISO-8859-1\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Description +#: ../samba-common.templates:3 +msgid "Character Set for Unix filesystem" +msgstr "Joc de caràcters pel sistema de fitxers de Unix" + +#. Description +#: ../samba-common.templates:3 +msgid "" +"You currently have a \"character set\" configured in your smb.conf. In " +"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " +"specify the character set you wish to use for theis new option, which " +"controls how Samba interprets filenames on the file system." +msgstr "" +"El fitxer smb.conf actual té configurat un \"character set\". En la versió " +"3.0 de Samba, aquesta opció es reemplaça per l'opció \"unix charset\". " +"Especifiqueu el joc de caràcters que voleu utilitzar per a aquesta nova " +"opció que controla el mode que el Samba interpreta els noms de fitxers del " +"sistema de fitxers." + +#. Description +#: ../samba-common.templates:3 +msgid "If you leave this option blank, your smb.conf will not be changed." +msgstr "Si deixeu aquesta opció en blanc no es modificarà el smb.conf." + +#. Description +#: ../samba-common.templates:13 +msgid "Character Set for DOS clients" +msgstr "Joc de caràcters pels clients DOS" + +#. Description +#: ../samba-common.templates:13 +msgid "" +"You currently have a \"client code page\" set in your smb.conf. In Samba " +"3.0, this option is replaced by the option \"dos charset\". Please specify " +"the character set you wish to use for this new option. In most cases, the " +"default chosen for you will be sufficient. Note that this option is not " +"needed to support Windows clients, it is only for DOS clients. If you leave " +"this option blank, your smb.conf will not be changed." +msgstr "" +"El fitxer smb.conf actual té configurat un \"client code page\". En la " +"versió 3.0 de Samba, aquesta opció es reemplaça per l'opció \"dos charset\". " +"L'opció per defecte és suficient en la majoria del casos. Recordeu que " +"aquesta opció no és necessària pel suport dels clients de Windows, només és " +"pels clients de DOS. Si deixeu aquesta opció en blanc no es canviarà el smb." +"conf." + +#. Description +#: ../samba-common.templates:24 +msgid "Modify smb.conf to use WINS settings from DHCP?" +msgstr "" +"Voleu modificar el smb.conf perquè utilitza els paràmetres de configuració " +"del WINS del DHCP?" + +#. Description +#: ../samba-common.templates:24 +msgid "" +"If your computer gets IP address information from a DHCP server on the " +"network, the DHCP server may also provide information about WINS servers " +"(\"NetBIOS name servers\") present on the network. This requires a change " +"to your smb.conf file so that DHCP-provided WINS settings will automatically " +"be read from /etc/samba/dhcp.conf." +msgstr "" +"Si el vostre ordinador obté la informació referent a la IP a través d'un " +"servidor de DHCP, aquest també li donarà informació sobre els servidors de " +"WINS (\"servidors de nom de NetBIOS\") presents a la xarxa. Aquesta opció " +"precisa d'una modificació del fitxer smb.conf per tal que els paràmetres de " +"WINS obtinguts a través del DHCP s'obtinguin a través de la lectura de /etc/" +"samba/dhcp.conf" + +#. Description +#: ../samba-common.templates:24 +msgid "" +"You must have the dhcp3-client package installed to take advantage of this " +"feature." +msgstr "" +"Per beneficiar-vos d'aquesta característica cal que tingueu instal·lat el " +"paquet dhcp3-client." + +#. Description +#: ../samba-common.templates:37 +msgid "Configure smb.conf through debconf?" +msgstr "Voleu configurar el smb.conf a través del debconf?" + +#. Description +#: ../samba-common.templates:37 +msgid "" +"The rest of the configuration of Samba deals with questions that affect " +"parameters in /etc/samba/smb.conf, which is the file used to configure the " +"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " +"line or an option that spans multiple lines, which could confuse debconf and " +"require you to edit your smb.conf by hand to get it working again." +msgstr "" +"La resta de la configuració del Samba tracta amb qüestions que afecten els " +"paràmetres del fitxer de configuració els programes de Samba /etc/samba/smb." +"conf. La versió actual del smb.conf conté una línia 'include' o una opció " +"que abarca múltiples línies que podria confondre al debconf i precisa de la " +"seva edició manual per poder-lo fer funcionar de nou." + +#. Description +#: ../samba-common.templates:37 +msgid "" +"If you don't use debconf to configure smb.conf, you will have to handle any " +"configuration changes yourself, and will not be able to take advantage of " +"periodic configuration enhancements. Therefore, use of debconf is " +"recommended if possible." +msgstr "" +"Si no utilitzeu el debconf per configurar el smb.conf, haureu de gestionar " +"manualment qualsevol canvi de la configuració, i no us podreu beneficiar de " +"les millores. La seva utilització és recomenable en cas que sigui possible." + +#. Description +#: ../samba-common.templates:52 +msgid "Workgroup/Domain Name?" +msgstr "Grup de treball/nom del domini?" + +#. Description +#: ../samba-common.templates:52 +msgid "" +"This controls what workgroup your server will appear to be in when queried " +"by clients. Note that this parameter also controls the Domain name used with " +"the security=domain setting." +msgstr "" +"Aquesta opció defineix en quin grup de treball apareixerà el vostre servidor " +"quan ho consultin els clients. Recordeu que aquest paràmetre també controla " +"el nom de domini utilitzat pel paràmetre de configuració security=domain." + +#. Description +#: ../samba-common.templates:60 +msgid "Use password encryption?" +msgstr "Voleu utilitzar l'encriptació de contrasenyes?" + +#. Description +#: ../samba-common.templates:60 +msgid "" +"Recent Windows clients communicate with SMB servers using encrypted " +"passwords. If you want to use clear text passwords you will need to change a " +"parameter in your Windows registry. It is recommended that you use encrypted " +"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " +"and that you set passwords in there for each user using the smbpasswd " +"command." +msgstr "" +"Els clients de Windows més recents es comuniquen amb els servidors de Samba " +"utilitzant contrasenyes encriptades. Si voleu utilitzar contrasenyes amb " +"text pla, haureu de modificar el vostre registre de Windows. És recomanable " +"utilitzar contrasenyes encriptades. Si ho feu, assegureu-vos de tenir un " +"fitxer /etc/samba/smbpasswd vàlid i que hi especifiqueu la contrasenya de " +"cada usuari utilitzant l'ordre smbpasswd." + +#. Description +#: ../samba.templates:4 +msgid "Create samba password database, /var/lib/samba/passdb.tdb?" +msgstr "" +"Es crea la base de dades de contrasenyes de Samba, /var/lib/samba/passdb.tdb?" + +#. Description +#: ../samba.templates:4 +msgid "" +"To be compatible with the defaults in most versions of Windows, Samba must " +"be configured to use encrypted passwords. This requires user passwords to " +"be stored in a file separate from /etc/passwd. This file can be created " +"automatically, but the passwords must be added manually (by you or the user) " +"by running smbpasswd, and you must arrange to keep it up-to-date in the " +"future. If you do not create it, you will have to reconfigure samba (and " +"probably your client machines) to use plaintext passwords. See /usr/share/" +"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " +"details." +msgstr "" +"El Samba s'ha de configurar perquè utilitzi contrasenyes encriptades per tal " +"que sigui compatible amb la majoria de versions de Windows per defecte. Això " +"implica que les contrasenyes d'usuari s'emmagatzemin a un fitxer diferent " +"del /etc/passwd. Aquest fitxer es pot crear automàticament, però les " +"contrasenyes s'han d'afegir manualment (per vós o per l'usuari) executant " +"l'ordre smbpasswd i cal que us organitzeu per tenir-lo actualitzat en un " +"futur. Si no el creeu, haureu de reconfigurar el Samba (i probablement els " +"vostres ordinadors clients) per tal que utilitzin contrasenyes de text pla. " +"Per més informació feu una ullada a /usr/share/doc/samba-doc/htmldocs/" +"ENCRYPTION.html del paquet samba-doc." + +#. Description +#: ../samba.templates:17 +msgid "Samba's log files have moved." +msgstr "S'han desplaçat els fitxers de registre de Samba." + +#. Description +#: ../samba.templates:17 +msgid "" +"Starting with the first packages of Samba 2.2 for Debian the log files for " +"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " +"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." +msgstr "" +"Els fitxers de registre dels dos dimonis de Samba (nmbd i smbd) es desen a /" +"var/log/samba des de la primera versió dels paquets de Samba 2.2 per Debian. " +"Els noms dels fitxers són, respectivament, log.nmbd i log.smbd." + +#. Description +#: ../samba.templates:17 +msgid "" +"The old log files that were in /var/log/ will be moved to the new location " +"for you." +msgstr "" +"Els fitxers de registre antics que estaven a /var/log/ es desplacen a la " +"nova ubicació." + +#. Description +#: ../samba.templates:28 +msgid "Running nmbd from inetd is no longer supported" +msgstr "L'execució del nmbd a través del inetd ja no estarà suportada." + +#. Description +#: ../samba.templates:28 +msgid "" +"Your system was previously configured to start nmbd and smbd from inetd. As " +"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " +"If you have modified your /etc/init.d/samba startup script, you may need to " +"adjust it by hand now so that nmbd will start." +msgstr "" +"El vostre sistema estava prèviament configurat perquè inicies el nmbd i el " +"smbd a través del inetd. A partir de la versió 2.999+3.0alpha20-4 el nmbd no " +"es pot iniciar a través del inetd. Si heu modificat la seqüència " +"d'arrencada /etc/init.d/samba, l'haureu de modificar manualment per tal que " +"s'iniciï com a dimoni." + +#. Choices +#: ../samba.templates:36 +msgid "daemons, inetd" +msgstr "dimonis, inetd" + +#. Description +#: ../samba.templates:38 +msgid "How do you want to run Samba?" +msgstr "Com voleu executar el Samba?" + +#. Description +#: ../samba.templates:38 +msgid "" +"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " +"daemon is the recommended approach." +msgstr "" +"El dimoni de Samba pot executar-se com un dimoni normal o des del inetd. És " +"recomanable executar-lo com un dimoni." + +#. Description +#: ../samba.templates:45 +msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" +msgstr "Es desplaça etc/samba/smbpasswd a /var/lib/samba/passdb.tdb?" + +#. Description +#: ../samba.templates:45 +msgid "" +"Samba 3.0 introduces a newer, more complete SAM database interface which " +"supersedes the /etc/samba/smbpasswd file. Would you like your existing " +"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " +"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " +"here." +msgstr "" +"El Samba 3.0 introdueix una interfície de base de dades de SAM més nova i " +"completa que reemplaça el fitxer /etc/samba/smbpassd. Voleu que es migri el " +"fitxer smbpasswd a /var/lib/samba/passdb.tdb? Si la vostra intenció és " +"utilitzar un altre pdb (ex, LDAP), haurieu de respondre 'no' aquí." + +#. Description +#: ../swat.templates:3 +msgid "Your smb.conf will be re-written!" +msgstr "El vostre smb.conf es reescriurà" + +#. Description +#: ../swat.templates:3 +msgid "" +"SWAT will rewrite your smb.conf file. It will rearrange the entries and " +"delete all comments, include= and copy= options. If you have a carefully " +"crafted smb.conf then back it up or don't use SWAT!" +msgstr "" +"El SWAT reescriurà el vostre fitxer smb.conf. Reorganitzarà les entrades i " +"suprimirà els comentaris i les opcions include= i copy=. Si teniu un smb." +"conf molt elaborat feu una còpia de seguretat o no utilitzeu el SWAT." diff --git a/packaging/Debian/debian-sarge/po/cs.po b/packaging/Debian/debian-sarge/po/cs.po new file mode 100644 index 0000000000..88e87c4418 --- /dev/null +++ b/packaging/Debian/debian-sarge/po/cs.po @@ -0,0 +1,289 @@ +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# +# Developers do not need to manually edit POT or PO files. +# +msgid "" +msgstr "" +"Project-Id-Version: samba\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2003-08-30 19:08-0500\n" +"PO-Revision-Date: 2004-03-05 12:04+0100\n" +"Last-Translator: Miroslav Kure <kurem@debian.cz>\n" +"Language-Team: Czech <provoz@debian.cz>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=ISO-8859-2\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Description +#: ../samba-common.templates:3 +msgid "Character Set for Unix filesystem" +msgstr "Znaková sada pro unixový souborový systém" + +#. Description +#: ../samba-common.templates:3 +msgid "" +"You currently have a \"character set\" configured in your smb.conf. In " +"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " +"specify the character set you wish to use for theis new option, which " +"controls how Samba interprets filenames on the file system." +msgstr "" +"Momentálnì máte ve svém smb.conf nastavenou volbu \"character set\". V Sambì " +"3.0 je tato volba nahrazena volbou \"unix charset\". Zadejte, prosím, " +"znakovou sadu, kterou chcete pou¾ít pro novou volbu. Tímto nastavíte, jak má " +"Samba interpretovat názvy souborù v souborovém systému." + +#. Description +#: ../samba-common.templates:3 +msgid "If you leave this option blank, your smb.conf will not be changed." +msgstr "Pokud nezadáte nic, vá¹ smb.conf se nezmìní." + +#. Description +#: ../samba-common.templates:13 +msgid "Character Set for DOS clients" +msgstr "Znaková sada pro DOSové klienty." + +#. Description +#: ../samba-common.templates:13 +msgid "" +"You currently have a \"client code page\" set in your smb.conf. In Samba " +"3.0, this option is replaced by the option \"dos charset\". Please specify " +"the character set you wish to use for this new option. In most cases, the " +"default chosen for you will be sufficient. Note that this option is not " +"needed to support Windows clients, it is only for DOS clients. If you leave " +"this option blank, your smb.conf will not be changed." +msgstr "" +"Momentálnì máte ve svém smb.conf nastavenou volbu \"client code page\". V " +"Sambì 3.0 je tato volba nahrazena volbou \"dos charset\". Zadejte, prosím, " +"znakovou sadu, kterou chcete pou¾ít pro novou volbu. Ve vìt¹inì pøípadù " +"postaèuje implicitní hodnota. Tato volba není potøebná pro Windowsové " +"klienty, pouze pro DOSové klienty. Pokud nezadáte nic, vá¹ smb.conf se " +"nezmìní." + +#. Description +#: ../samba-common.templates:24 +msgid "Modify smb.conf to use WINS settings from DHCP?" +msgstr "Upravit smb.conf, aby pou¾íval WINS nastavení z DHCP?" + +#. Description +#: ../samba-common.templates:24 +msgid "" +"If your computer gets IP address information from a DHCP server on the " +"network, the DHCP server may also provide information about WINS servers " +"(\"NetBIOS name servers\") present on the network. This requires a change " +"to your smb.conf file so that DHCP-provided WINS settings will automatically " +"be read from /etc/samba/dhcp.conf." +msgstr "" +"Pokud vá¹ poèítaè získává IP adresu z DHCP serveru, mù¾ete vám tento server " +"nabízet také informace o WINS serverech (jmenných serverech NetBIOSu), které " +"jsou dostupné ve va¹í síti. To vy¾aduje zásah do souboru smb.conf, kde se " +"nastaví, aby se informace o WINS serverech naèítaly ze souboru /etc/samba/" +"dhcp.conf." + +#. Description +#: ../samba-common.templates:24 +msgid "" +"You must have the dhcp3-client package installed to take advantage of this " +"feature." +msgstr "" +"Pro vyu¾ití této vlastnosti musíte mít nainstalovaný balík dhcp3-client." + +#. Description +#: ../samba-common.templates:37 +msgid "Configure smb.conf through debconf?" +msgstr "Konfigurovat smb.conf pøes debconf?" + +#. Description +#: ../samba-common.templates:37 +msgid "" +"The rest of the configuration of Samba deals with questions that affect " +"parameters in /etc/samba/smb.conf, which is the file used to configure the " +"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " +"line or an option that spans multiple lines, which could confuse debconf and " +"require you to edit your smb.conf by hand to get it working again." +msgstr "" +"Zbytek konfigurace Samby se zabývá otázkami, které mìní parametry v /etc/" +"samba/smb.conf, co¾ je soubor pou¾ívaný pro nastavení programù nmbd a smbd " +"(dohromady tvoøí Sambu). Vá¹ stávající smb.conf obsahuje øádek 'include' " +"nebo volbu, která se táhne pøes více øádkù, co¾ mù¾e zmást debconf a mù¾e " +"zpùsobit, ¾e pro znovuzprovoznìní Samby budete muset upravit smb.conf ruènì." + +#. Description +#: ../samba-common.templates:37 +msgid "" +"If you don't use debconf to configure smb.conf, you will have to handle any " +"configuration changes yourself, and will not be able to take advantage of " +"periodic configuration enhancements. Therefore, use of debconf is " +"recommended if possible." +msgstr "" +"Pokud pro konfiguraci smb.conf nepou¾íváte debconf, budete muset zvládnout " +"v¹echna nastavení sami a nebudete moci vyu¾ívat výhod pravidelných vylep¹ení " +"tohoto souboru. Z tohoto pohledu je pou¾ití debconf doporuèená volba." + +#. Description +#: ../samba-common.templates:52 +msgid "Workgroup/Domain Name?" +msgstr "Skupina/Doménové jméno?" + +#. Description +#: ../samba-common.templates:52 +msgid "" +"This controls what workgroup your server will appear to be in when queried " +"by clients. Note that this parameter also controls the Domain name used with " +"the security=domain setting." +msgstr "" +"Zde mù¾ete zadat jméno skupiny, do které má server patøit. Tímto parametrem " +"také nastavíte doménové jméno pou¾ívané s nastavením security=domain." + +#. Description +#: ../samba-common.templates:60 +msgid "Use password encryption?" +msgstr "Pou¾ít ¹ifrování hesel?" + +#. Description +#: ../samba-common.templates:60 +msgid "" +"Recent Windows clients communicate with SMB servers using encrypted " +"passwords. If you want to use clear text passwords you will need to change a " +"parameter in your Windows registry. It is recommended that you use encrypted " +"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " +"and that you set passwords in there for each user using the smbpasswd " +"command." +msgstr "" +"Souèasní windowsoví klienti pou¾ívají pøi komunikaci se SMB servery " +"za¹ifrovaná hesla. Pokud chcete pou¾ít hesla neza¹ifrovaná, musíte zmìnit " +"jeden parametr v registrech systému Windows. Doporuèujeme pou¾ívat " +"za¹ifrovaná hesla. Hesla mù¾ete jednotlivým u¾ivatelùm pøidat pøíkazem " +"smbpasswd." + +#. Description +#: ../samba.templates:4 +msgid "Create samba password database, /var/lib/samba/passdb.tdb?" +msgstr "Vytvoøit databázi hesel /var/lib/samba/passdb.tdb?" + +#. Description +#: ../samba.templates:4 +msgid "" +"To be compatible with the defaults in most versions of Windows, Samba must " +"be configured to use encrypted passwords. This requires user passwords to " +"be stored in a file separate from /etc/passwd. This file can be created " +"automatically, but the passwords must be added manually (by you or the user) " +"by running smbpasswd, and you must arrange to keep it up-to-date in the " +"future. If you do not create it, you will have to reconfigure samba (and " +"probably your client machines) to use plaintext passwords. See /usr/share/" +"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " +"details." +msgstr "" +"Pro dosa¾ení co nejvìt¹í kompatibility s vìt¹inou verzí systému Windows musí " +"být Samba nastavena, aby pou¾ívala ¹ifrovaná hesla. To vy¾aduje, aby byla " +"hesla uchována mimo souboru /etc/passwd. Po¾adovaný soubor mù¾ete nechat " +"vytvoøit automaticky, ale hesla do nìj musí být pøidána ruènì programem " +"smbpasswd (buï vámi, nebo u¾ivatelem) a také jej musíte udr¾ovat " +"aktualizovaný. Pokud jej nevytvoøíte, budete muset nastavit Sambu (a " +"pravdìpodobnì také klienty), aby pou¾ívala ne¹ifrovaná hesla. Podrobnosti " +"naleznete v /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html z balíku samba-" +"doc." + +#. Description +#: ../samba.templates:17 +msgid "Samba's log files have moved." +msgstr "Logovací soubory Samby se pøesunuly." + +#. Description +#: ../samba.templates:17 +msgid "" +"Starting with the first packages of Samba 2.2 for Debian the log files for " +"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " +"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." +msgstr "" +"Od prvních debianích balíèkù Samby verze 2.2 jsou logovací soubory obou " +"serverù (nmbd a smbd) umístìny ve /var/log/samba/. Názvy pøíslu¹ných souborù " +"jsou log.nmbd a log.smbd." + +#. Description +#: ../samba.templates:17 +msgid "" +"The old log files that were in /var/log/ will be moved to the new location " +"for you." +msgstr "" +"Staré soubory z adresáøe /var/log/ budou pøesunuty na nové místo automaticky." + +#. Description +#: ../samba.templates:28 +msgid "Running nmbd from inetd is no longer supported" +msgstr "Spou¹tìní nmbd z inetd ji¾ není podporováno" + +#. Description +#: ../samba.templates:28 +msgid "" +"Your system was previously configured to start nmbd and smbd from inetd. As " +"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " +"If you have modified your /etc/init.d/samba startup script, you may need to " +"adjust it by hand now so that nmbd will start." +msgstr "" +"Vá¹ systém byl pùvodnì nastaven, aby spou¹tìl nmbd a smbd z inetd. Od verze " +"2.999+3.0.alpha20-4 ji¾ nelze nmbd spou¹tìt z inetd. Pokud jste si upravili " +"startovací skript /etc/init.d/samba, mo¾ná jej nyní budete muset upravit pro " +"korektní start nmbd." + +#. Choices +#: ../samba.templates:36 +msgid "daemons, inetd" +msgstr "démoni, inetd" + +#. Description +#: ../samba.templates:38 +msgid "How do you want to run Samba?" +msgstr "Jak chcete spou¹tìt Sambu?" + +#. Description +#: ../samba.templates:38 +msgid "" +"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " +"daemon is the recommended approach." +msgstr "" +"Server Samby smbd mù¾e bì¾et jako obyèejný démon (doporuèeno), nebo se mù¾e " +"spou¹tìt z inetd." + +#. Description +#: ../samba.templates:45 +msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" +msgstr "Pøesunout /etc/samba/smbpasswd do /var/lib/samba/passdb.tdb?" + +#. Description +#: ../samba.templates:45 +msgid "" +"Samba 3.0 introduces a newer, more complete SAM database interface which " +"supersedes the /etc/samba/smbpasswd file. Would you like your existing " +"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " +"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " +"here." +msgstr "" +"Samba 3.0 zavedla nové, kompletnìj¹í rozhraní k SAM databázi, je¾ pøekonává " +"pùvodní soubor /etc/samba/smbpasswd. Chcete pøevést stávající soubor " +"smbpasswd na /var/lib/samba/passwd.tdb? Pokud plánujete pou¾ít jinou pdb " +"databázi (tøeba LDAP), mìli byste odponìdìt 'ne'." + +#. Description +#: ../swat.templates:3 +msgid "Your smb.conf will be re-written!" +msgstr "Vá¹ smb.conf bude pøepsán!" + +#. Description +#: ../swat.templates:3 +msgid "" +"SWAT will rewrite your smb.conf file. It will rearrange the entries and " +"delete all comments, include= and copy= options. If you have a carefully " +"crafted smb.conf then back it up or don't use SWAT!" +msgstr "" +"SWAT pøepí¹e vá¹ soubor smb.conf. Mj. pøeskládá polo¾ky a sma¾e v¹echny " +"komentáøe a volby include= a copy=. Pokud máte pracnì odladìný smb.conf, tak " +"si jej zazálohujte, nebo nepou¾ívejte SWAT!" diff --git a/packaging/Debian/debian-sarge/po/da.po b/packaging/Debian/debian-sarge/po/da.po new file mode 100644 index 0000000000..5d0aa55114 --- /dev/null +++ b/packaging/Debian/debian-sarge/po/da.po @@ -0,0 +1,290 @@ +# translation of da.po to Danish +# translation of samba Debian debconf template to Danish +# Claus Hindsgaul <claus_h@image.dk>, 2004. +# +msgid "" +msgstr "" +"Project-Id-Version: da\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2003-08-30 19:08-0500\n" +"PO-Revision-Date: 2004-02-15 17:23+0100\n" +"Last-Translator: Claus Hindsgaul <claus_h@image.dk>\n" +"Language-Team: Danish <dansk@klid.dk>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 1.0.2\n" + +#. Description +#: ../samba-common.templates:3 +msgid "Character Set for Unix filesystem" +msgstr "Tegnsæt til Unix-filsystemet" + +#. Description +#: ../samba-common.templates:3 +msgid "" +"You currently have a \"character set\" configured in your smb.conf. In " +"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " +"specify the character set you wish to use for theis new option, which " +"controls how Samba interprets filenames on the file system." +msgstr "" +"Du har en \"character set\"-indstilling i din smb.conf. I Samba 3.0 " +"erstattes denne af en ny indstilling, \"unix charset\". Angiv det " +"tegnsæt, du ønsker at bruge i denne nye indstilling, som styrer " +"hvordan Samba tolker filnavne pÃ¥ systemet." + +#. Description +#: ../samba-common.templates:3 +msgid "If you leave this option blank, your smb.conf will not be changed." +msgstr "Hvis du ikke skriver noget her, vil din smb.conf ikke blive ændret." + +#. Description +#: ../samba-common.templates:13 +msgid "Character Set for DOS clients" +msgstr "Tegnsæt til DOS-klienter" + +#. Description +#: ../samba-common.templates:13 +msgid "" +"You currently have a \"client code page\" set in your smb.conf. In Samba " +"3.0, this option is replaced by the option \"dos charset\". Please specify " +"the character set you wish to use for this new option. In most cases, the " +"default chosen for you will be sufficient. Note that this option is not " +"needed to support Windows clients, it is only for DOS clients. If you leave " +"this option blank, your smb.conf will not be changed." +msgstr "" +"Du har en \"client code page\"-indstilling i din smb.conf. I Samba " +"3.0 erstattes denne af en ny indstilling, \"dos charset\". Angiv det " +"tegnsæt, du ønsker at bruge i denne nye indstilling. I de fleste tilfælde " +"vil det forvalgte være nok. Bemærk at denne indstilling ikke kræves " +"for at understøtte Windows-klienter; den gælder kun DOS-klienter. Hvis " +"du ikke skriver noget her, vil smb.conf ikke blive ændret." + +#. Description +#: ../samba-common.templates:24 +msgid "Modify smb.conf to use WINS settings from DHCP?" +msgstr "Ret smb.conf, sÃ¥ den benytter WINS-indstillinger fra DHCP?" + +#. Description +#: ../samba-common.templates:24 +msgid "" +"If your computer gets IP address information from a DHCP server on the " +"network, the DHCP server may also provide information about WINS servers " +"(\"NetBIOS name servers\") present on the network. This requires a change " +"to your smb.conf file so that DHCP-provided WINS settings will automatically " +"be read from /etc/samba/dhcp.conf." +msgstr "" +"Hvis din computer fÃ¥r IP-adresseoplysninger fra en DHCP-server pÃ¥ " +"netværket, kan DHCP-serveren ogsÃ¥ give oplysninger om WINS-servere " +"(\"NetBIOS navneservere\") pÃ¥ netværket. Dette kræver en ændring i din " +"smb.conf-fil, sÃ¥ WINS-indstillingerne fra DHCP-serveren automatisk " +"indlæses fra /etc/samba/dhcp.conf." + +#. Description +#: ../samba-common.templates:24 +msgid "" +"You must have the dhcp3-client package installed to take advantage of this " +"feature." +msgstr "" +"Ud skal have pakken dhcp3-client installeret for at kunne udnytte denne " +"funktion." + +#. Description +#: ../samba-common.templates:37 +msgid "Configure smb.conf through debconf?" +msgstr "Sæt smb.conf op med debconf?" + +#. Description +#: ../samba-common.templates:37 +msgid "" +"The rest of the configuration of Samba deals with questions that affect " +"parameters in /etc/samba/smb.conf, which is the file used to configure the " +"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " +"line or an option that spans multiple lines, which could confuse debconf and " +"require you to edit your smb.conf by hand to get it working again." +msgstr "" +"Resten af Samba-opsætningen drejer sig om spørgsmÃ¥l om indstillingerne " +"i filen /etc/samba/smb.conf, som benyttes til at sætte Samba-programmerne " +"(nmbd og smbd) op. Din nuværende smb.conf indeholder en 'include'-linje " +"eller en indstilling, der fylder flere linjer, hvilket kan forvirre " +"debconf og kræve at du redigerer din smb.conf selv for at fÃ¥ Samba til " +"at fungere igen." + +#. Description +#: ../samba-common.templates:37 +msgid "" +"If you don't use debconf to configure smb.conf, you will have to handle any " +"configuration changes yourself, and will not be able to take advantage of " +"periodic configuration enhancements. Therefore, use of debconf is " +"recommended if possible." +msgstr "" +"Hvis du ikke bruger debconf til at sætte smb.conf op, mÃ¥ du selv hÃ¥ndtere " +"ændringer i opsætningen, og vil ikke kunne drage nytte af de løbende " +"forbedringer i opsætningen. Derfor anbefales brugen af debconf, hvis " +"det er muligt." + +#. Description +#: ../samba-common.templates:52 +msgid "Workgroup/Domain Name?" +msgstr "Navn pÃ¥ arbejdsgruppe/domæne?" + +#. Description +#: ../samba-common.templates:52 +msgid "" +"This controls what workgroup your server will appear to be in when queried " +"by clients. Note that this parameter also controls the Domain name used with " +"the security=domain setting." +msgstr "" +"Dette styrer hvilken arbejdsgruppe din server til tilhøre, nÃ¥r den bliver " +"spurgt af klienter. Bemærk at dette ogsÃ¥ styrer det domænenavn, der bruges " +"med indstillingen \"security=domain\"." + +#. Description +#: ../samba-common.templates:60 +msgid "Use password encryption?" +msgstr "Kryptér adgangskoder?" + +#. Description +#: ../samba-common.templates:60 +msgid "" +"Recent Windows clients communicate with SMB servers using encrypted " +"passwords. If you want to use clear text passwords you will need to change a " +"parameter in your Windows registry. It is recommended that you use encrypted " +"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " +"and that you set passwords in there for each user using the smbpasswd " +"command." +msgstr "" +"Nyere Windows-klienter kommunikerer med SMB-servere med krypterede " +"adgangskoder. Hvis du vil bruge adgangkoder i klar tekst, bliver du " +"nødt til at ændre en indstilling i Windows' registreringsdatabase. Det " +"anbefales at du bruger krypterede adgangskoder. Hvis du gør, sÃ¥ sørg for " +"at du har en gyldig /etc/samba/smbpasswd-fil og at du her angiver " +"adgangskoder for hver bruger med kommandoen smbpasswd." + +#. Description +#: ../samba.templates:4 +msgid "Create samba password database, /var/lib/samba/passdb.tdb?" +msgstr "Opret samba-adgangskodedatabasen /var/lib/samba/passdb.tdb?" + +#. Description +#: ../samba.templates:4 +msgid "" +"To be compatible with the defaults in most versions of Windows, Samba must " +"be configured to use encrypted passwords. This requires user passwords to " +"be stored in a file separate from /etc/passwd. This file can be created " +"automatically, but the passwords must be added manually (by you or the user) " +"by running smbpasswd, and you must arrange to keep it up-to-date in the " +"future. If you do not create it, you will have to reconfigure samba (and " +"probably your client machines) to use plaintext passwords. See /usr/share/" +"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " +"details." +msgstr "" +"For at være kompatibel med standardindstillingerne i de fleste udgaver af " +"Windows, skal Samba være sat op til at benytte krypterede adgangskoder. " +"Det kræver at brugernes adgangskoder gemmes i en anden fil end /etc/passwd. " +"Denne fil kan oprettes automatisk, men adgangskoderne er nødt til at blive " +"tilføjet manuelt (af dig eller af brugeren) ved at køre smbpasswd, og du " +"skal holde den opdateret i fremtiden. Hvis du ikke opretter den, er du nødt " +"til at sætte samba (og sikkert ogsÃ¥ dine klientmaskiner) op til at benytte " +"adgangskoder i klar tekst. Se /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html " +"i pakken samba-doc for flere detaljer." + +#. Description +#: ../samba.templates:17 +msgid "Samba's log files have moved." +msgstr "Sambas logfiler er flyttet." + +#. Description +#: ../samba.templates:17 +msgid "" +"Starting with the first packages of Samba 2.2 for Debian the log files for " +"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " +"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." +msgstr "" +"Fra og med de første Samba 2.2-Debianpakker, bliver begge Samba-dæmonernes " +"(nmbd og smbd) logfiler gemt i /var/log/samba/. Filernes navne er log.nmbd " +"og log.smbd." + +#. Description +#: ../samba.templates:17 +msgid "" +"The old log files that were in /var/log/ will be moved to the new location " +"for you." +msgstr "" +"De gamle logfiler, der var i /var/log vil blive flyttet til den nye placering " +"for dig." + +#. Description +#: ../samba.templates:28 +msgid "Running nmbd from inetd is no longer supported" +msgstr "Kørsel af nmbd fra inetd understøttes ikke længere." + +#. Description +#: ../samba.templates:28 +msgid "" +"Your system was previously configured to start nmbd and smbd from inetd. As " +"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " +"If you have modified your /etc/init.d/samba startup script, you may need to " +"adjust it by hand now so that nmbd will start." +msgstr "" +"Dit system var tidligere sat op til at starte nmbd og smbd fra inetd. " +"Fra og med version 2.999+3.0.alpha20-4 kan nmbd ikke længere startes med inetd. " +"Hvis du har rettet din opstartsskript /etc/init.d/samba, kan du være nødt " +"til at justere det manuelt nu, sÃ¥ nmbd bliver startet." + +#. Choices +#: ../samba.templates:36 +msgid "daemons, inetd" +msgstr "dæmoner, inetd" + +#. Description +#: ../samba.templates:38 +msgid "How do you want to run Samba?" +msgstr "Hvordan skal Samba køres?" + +#. Description +#: ../samba.templates:38 +msgid "" +"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " +"daemon is the recommended approach." +msgstr "" +"Samba-dæmonen smbd kan køre som en almindelig dæmon eller fra inetd. Det " +"anbefales at køre den som dæmon." + +#. Description +#: ../samba.templates:45 +msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" +msgstr "Flyt /etc/samba/smbpasswd til /var/lib/samba/passdb.tdb?" + +#. Description +#: ../samba.templates:45 +msgid "" +"Samba 3.0 introduces a newer, more complete SAM database interface which " +"supersedes the /etc/samba/smbpasswd file. Would you like your existing " +"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " +"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " +"here." +msgstr "" +"Samba 3.0 har en nyere og mere komplet SAM-databasegrænseflade, som " +"erstatter filen /etc/samba/smbpasswd. Vil du have din eksisterende " +"smbpasswd-fil overført til /var/lib/samba/passdb.tdb?`Hvis du i stedet " +"planlægger at bruge en anden pdb-hÃ¥ndtering (f.eks. LDAP), bør du afvise " +"dette." + +#. Description +#: ../swat.templates:3 +msgid "Your smb.conf will be re-written!" +msgstr "Din smb.conf vil blive omskrevet!" + +#. Description +#: ../swat.templates:3 +msgid "" +"SWAT will rewrite your smb.conf file. It will rearrange the entries and " +"delete all comments, include= and copy= options. If you have a carefully " +"crafted smb.conf then back it up or don't use SWAT!" +msgstr "" +"SWAT vil overskrive din smb.conf-fil. Den vil flytte rundt pÃ¥ linjerne " +"og slette alle kommentarer, og linjer med \"include=\" og \"copy=\". " +"Hvis du har brugt tid pÃ¥ at lave din egen smb.conf, sÃ¥ tag en " +"sikkerhedskopi eller undlad at benytte SWAT!" + diff --git a/packaging/Debian/debian-stable/po/es.po b/packaging/Debian/debian-sarge/po/es.po index 0d1d1a770d..0d1d1a770d 100644 --- a/packaging/Debian/debian-stable/po/es.po +++ b/packaging/Debian/debian-sarge/po/es.po diff --git a/packaging/Debian/debian-stable/po/fr.po b/packaging/Debian/debian-sarge/po/fr.po index 6be14c19b4..6be14c19b4 100644 --- a/packaging/Debian/debian-stable/po/fr.po +++ b/packaging/Debian/debian-sarge/po/fr.po diff --git a/packaging/Debian/debian-sarge/po/it.po b/packaging/Debian/debian-sarge/po/it.po new file mode 100644 index 0000000000..07f505604e --- /dev/null +++ b/packaging/Debian/debian-sarge/po/it.po @@ -0,0 +1,287 @@ +# samba po-debconf translation to italian
+# Copyright (C) 2004 Software in the Public Interest
+# This file is distributed under the same license as the samba package.
+# Luca Monducci, 2004.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: samba 3.0.7 debconf templates\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2003-08-30 19:08-0500\n"
+"PO-Revision-Date: 2004-12-03 21:10+0100\n"
+"Last-Translator: Luca Monducci <luca.mo@tiscali.it>\n"
+"Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Description
+#: ../samba-common.templates:3
+msgid "Character Set for Unix filesystem"
+msgstr "Set di caratteri per il filesystem Unix"
+
+#. Description
+#: ../samba-common.templates:3
+msgid ""
+"You currently have a \"character set\" configured in your smb.conf. In "
+"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
+"specify the character set you wish to use for theis new option, which "
+"controls how Samba interprets filenames on the file system."
+msgstr ""
+"Attualmente in smb.conf è configurato il «character set», in Samba 3.0, "
+"questa opzione è sostituita da una nuova opzione «unix character». "
+"Specificare il set di caratteri che si desidera usare per questa opzione "
+"che controlla come Samba interpreta i nomi dei file sul file system."
+
+#. Description
+#: ../samba-common.templates:3
+msgid "If you leave this option blank, your smb.conf will not be changed."
+msgstr "Lasciando vuoto questo valore smb.conf non verrà modificato."
+
+#. Description
+#: ../samba-common.templates:13
+msgid "Character Set for DOS clients"
+msgstr "Set di caratteri per i client DOS"
+
+#. Description
+#: ../samba-common.templates:13
+msgid ""
+"You currently have a \"client code page\" set in your smb.conf. In Samba "
+"3.0, this option is replaced by the option \"dos charset\". Please specify "
+"the character set you wish to use for this new option. In most cases, the "
+"default chosen for you will be sufficient. Note that this option is not "
+"needed to support Windows clients, it is only for DOS clients. If you leave "
+"this option blank, your smb.conf will not be changed."
+msgstr ""
+"Attualmente in smb.conf è configurato il «client code page», in Samba 3.0, "
+"questa opzione è sostituita dall'opzione «dos character». Specificare il "
+"set di caratteri che si desidera usare per questa opzione. In molti casi "
+"il valore predefinito è sufficiente. Notare che questa opzione non è "
+"necessaria per i client Windows, invece è specifica per i client DOS. "
+"Lasciando vuoto questo valore smb.conf non verrà modificato."
+
+#. Description
+#: ../samba-common.templates:24
+msgid "Modify smb.conf to use WINS settings from DHCP?"
+msgstr "Modificare smb.conf per usare le impostazioni WINS da DHCP?"
+
+#. Description
+#: ../samba-common.templates:24
+msgid ""
+"If your computer gets IP address information from a DHCP server on the "
+"network, the DHCP server may also provide information about WINS servers "
+"(\"NetBIOS name servers\") present on the network. This requires a change "
+"to your smb.conf file so that DHCP-provided WINS settings will automatically "
+"be read from /etc/samba/dhcp.conf."
+msgstr ""
+"Se il computer prende le informazioni sull'indirizzo IP da un server DHCP "
+"allora il server DHCP può fornire anche informazioni sui server WINS (i "
+"name server per NetBIOS) presenti nella rete. Questo necessita una modifica "
+"al file smb.conf in modo le impostazioni di WINS fornite dal DHCP siano "
+"lette automaticamente da /etc/samba/dhcp.conf."
+
+#. Description
+#: ../samba-common.templates:24
+msgid ""
+"You must have the dhcp3-client package installed to take advantage of this "
+"feature."
+msgstr ""
+"Deve essere installato il pacchetto dhcp3-client per usare questa "
+"funzionalità ."
+
+#. Description
+#: ../samba-common.templates:37
+msgid "Configure smb.conf through debconf?"
+msgstr "Configurare smb.conf usando debconf?"
+
+#. Description
+#: ../samba-common.templates:37
+msgid ""
+"The rest of the configuration of Samba deals with questions that affect "
+"parameters in /etc/samba/smb.conf, which is the file used to configure the "
+"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
+"line or an option that spans multiple lines, which could confuse debconf and "
+"require you to edit your smb.conf by hand to get it working again."
+msgstr ""
+"Il resto della configurazione di Samba fa delle domande sui parametri di "
+"/etc/samba/smb.conf, il file usato per configurare i programmi di Samba "
+"(nmbd e smbd). L'attuale file smb.conf contiene una riga «include» o una "
+"opzione che si estende su più righe: questo potrebbe confondere debconf "
+"e richiedere una modifica manuale a smb.conf per renderlo nuovamente "
+"funzionante."
+
+#. Description
+#: ../samba-common.templates:37
+msgid ""
+"If you don't use debconf to configure smb.conf, you will have to handle any "
+"configuration changes yourself, and will not be able to take advantage of "
+"periodic configuration enhancements. Therefore, use of debconf is "
+"recommended if possible."
+msgstr ""
+"Se non si vuole usare usare debconf per configurare smb.conf si dovranno "
+"gestire tutti i cambiamenti della configurazione da soli e non sarà "
+"possibile beneficiare dei miglioramenti periodici della configurazione; "
+"se possibile, si consiglia l'uso di debconf."
+
+#. Description
+#: ../samba-common.templates:52
+msgid "Workgroup/Domain Name?"
+msgstr "Nome del Workgroup/Dominio"
+
+#. Description
+#: ../samba-common.templates:52
+msgid ""
+"This controls what workgroup your server will appear to be in when queried "
+"by clients. Note that this parameter also controls the Domain name used with "
+"the security=domain setting."
+msgstr ""
+"Questo imposta in quale workgroup apparirà il server quando i client "
+"tenteranno l'accesso. Notare che questo parametro controlla anche il nome "
+"del Dominio usato del parametro «security=domain»."
+
+#. Description
+#: ../samba-common.templates:60
+msgid "Use password encryption?"
+msgstr "Usare password cifrate?"
+
+#. Description
+#: ../samba-common.templates:60
+msgid ""
+"Recent Windows clients communicate with SMB servers using encrypted "
+"passwords. If you want to use clear text passwords you will need to change a "
+"parameter in your Windows registry. It is recommended that you use encrypted "
+"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
+"and that you set passwords in there for each user using the smbpasswd "
+"command."
+msgstr ""
+"I client Windows recenti comunicano con i server SMB usando password "
+"cifrate. Per usare password in chiaro è necessario cambiare un parametro "
+"nel registro di Windows. Si raccomanda l'uso di password cifrate. In caso "
+"contrario assicurarsi che il file /etc/samba/smbpasswd sia valido e usare "
+"il comando smbpasswd per inserirci le password di ciascun utente."
+
+#. Description
+#: ../samba.templates:4
+msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
+msgstr "Creare il database delle password samba /var/lib/samba/passdb.tdb?"
+
+#. Description
+#: ../samba.templates:4
+msgid ""
+"To be compatible with the defaults in most versions of Windows, Samba must "
+"be configured to use encrypted passwords. This requires user passwords to "
+"be stored in a file separate from /etc/passwd. This file can be created "
+"automatically, but the passwords must be added manually (by you or the user) "
+"by running smbpasswd, and you must arrange to keep it up-to-date in the "
+"future. If you do not create it, you will have to reconfigure samba (and "
+"probably your client machines) to use plaintext passwords. See /usr/share/"
+"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
+"details."
+msgstr ""
+"Per essere compatibile con le impostazioni predefinite di molte versioni "
+"di Windows, Samba deve essere configurato per usare password cifrate. "
+"Questo richiede che le password degli utenti siano memorizzate in un file "
+"diverso da /etc/passwd. Questo file può essere creato automaticamente ma "
+"qualcuno (l'amministratore o l'utente) dovrà inserire manualmente e poi "
+"tenere aggiornate le password usando smbpasswd. Se non si crea questo file "
+"sarà necessario riconfigurare samba (e probabilmente anche le macchine "
+"client) per usare password in chiaro. Vedere /usr/share/doc/samba-doc/"
+"htmldocs/ENCRYPTION.html contenuto nel pacchetto samba-doc per ulteriori "
+"dettagli."
+
+#. Description
+#: ../samba.templates:17
+msgid "Samba's log files have moved."
+msgstr "I file di log di Samba sono stati spostati."
+
+#. Description
+#: ../samba.templates:17
+msgid ""
+"Starting with the first packages of Samba 2.2 for Debian the log files for "
+"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
+"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
+msgstr ""
+"A partire dai primi pacchetti Samba 2.2 per Debian i file di log per "
+"entrambi i demoni Samba (nmbd e smbd) sono memorizzati in /var/log/samba/. "
+"I nomi dei file di log sono log.nmbd e log.smbd rispettivamente per nmbd e "
+"smbd."
+
+#. Description
+#: ../samba.templates:17
+msgid ""
+"The old log files that were in /var/log/ will be moved to the new location "
+"for you."
+msgstr ""
+"I vecchi file di log in /var/log/ verranno spostati nella nuova directory."
+
+#. Description
+#: ../samba.templates:28
+msgid "Running nmbd from inetd is no longer supported"
+msgstr "L'avvio di nmbd da inetd non è più supportato"
+
+#. Description
+#: ../samba.templates:28
+msgid ""
+"Your system was previously configured to start nmbd and smbd from inetd. As "
+"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. "
+"If you have modified your /etc/init.d/samba startup script, you may need to "
+"adjust it by hand now so that nmbd will start."
+msgstr ""
+"Il sistema è configurato per avviare nmbd e smbd da inetd. Dalla versione "
+"2.999+3.0.alpha20-4 non è più possibile avviare nmbd da inetd. Se si è "
+"modificato lo script di avvio /etc/init.d/samba potrebbe essere necessario "
+"correggerlo a mano in modo da permettere l'avvio di nmbd."
+
+#. Choices
+#: ../samba.templates:36
+msgid "daemons, inetd"
+msgstr "demoni, inetd"
+
+#. Description
+#: ../samba.templates:38
+msgid "How do you want to run Samba?"
+msgstr "Come avviare Samba?"
+
+#. Description
+#: ../samba.templates:38
+msgid ""
+"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
+"daemon is the recommended approach."
+msgstr ""
+"Il demone Samba smbd può essere avviato come un normale demone oppure da "
+"inetd. Si raccomanda l'avvio come demone."
+
+#. Description
+#: ../samba.templates:45
+msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
+msgstr "Spostare /etc/samba/smbpasswd in /var/lib/samba/passdb.tdb?"
+
+#. Description
+#: ../samba.templates:45
+msgid ""
+"Samba 3.0 introduces a newer, more complete SAM database interface which "
+"supersedes the /etc/samba/smbpasswd file. Would you like your existing "
+"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you "
+"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
+"here."
+msgstr ""
+"Samba 3.0 introduce una nuova e più completa interfaccia al database SAM che "
+"sostituisce il file /etc/samba/smbpasswd. Si vuole che il file smbpasswd sia "
+"migrato a /var/lib/samba/passdb.tdb? Se si pensa di usare un backend pdb "
+"diverso (p.e. LDAP), si dovrebbe rispondere «no»."
+
+#. Description
+#: ../swat.templates:3
+msgid "Your smb.conf will be re-written!"
+msgstr "Sovrascrittura di smb.conf!"
+
+#. Description
+#: ../swat.templates:3
+msgid ""
+"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
+"delete all comments, include= and copy= options. If you have a carefully "
+"crafted smb.conf then back it up or don't use SWAT!"
+msgstr ""
+"SWAT sovrascriverà il file smb.conf, verranno riordinate le impostazioni e "
+"verranno cancellati tutti i commenti, le opzioni include= e copy=. Se si è "
+"personalizzato smb.conf tornare indietro e non usare SWAT."
diff --git a/packaging/Debian/debian-sarge/po/ja.po b/packaging/Debian/debian-sarge/po/ja.po new file mode 100644 index 0000000000..ce59c6171f --- /dev/null +++ b/packaging/Debian/debian-sarge/po/ja.po @@ -0,0 +1,292 @@ +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# +# Developers do not need to manually edit POT or PO files. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2003-08-30 19:08-0500\n" +"PO-Revision-Date: 2003-09-09 09:26+0900\n" +"Last-Translator: Kenshi Muto <kmuto@debian.org>\n" +"Language-Team: Japanese <debian-japanese@lists.debian.org>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=EUC-JP\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Description +#: ../samba-common.templates:3 +msgid "Character Set for Unix filesystem" +msgstr "Unix ¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¸þ¤±¤Îʸ»ú¥»¥Ã¥È" + +#. Description +#: ../samba-common.templates:3 +msgid "" +"You currently have a \"character set\" configured in your smb.conf. In " +"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " +"specify the character set you wish to use for theis new option, which " +"controls how Samba interprets filenames on the file system." +msgstr "" +"¸½ºß¡¢smb.conf ¤ËÀßÄêºÑ¤ß¤Î \"character set\" ¤¬¤¢¤ê¤Þ¤¹¡£Samba 3.0 ¤Ç¤Ï¡¢¤³" +"¤Î¥ª¥×¥·¥ç¥ó¤Ï¿·¤·¤¤¥ª¥×¥·¥ç¥ó \"unix charset\" ¤ËÃÖ¤´¹¤¨¤é¤ì¤Æ¤¤¤Þ¤¹¡£" +"Samba ¤¬¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤Î¥Õ¥¡¥¤¥ë̾¤ò¤É¤Î¤è¤¦¤Ë²ò¼á¤¹¤ë¤«¤òÀ©¸æ¤¹¤ë¤³¤Î¿·¤·" +"¤¤¥ª¥×¥·¥ç¥ó¤Î¤¿¤á¤Ë¡¢´õ˾¤¹¤ëʸ»ú¥»¥Ã¥È¤ò»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£" + +#. Description +#: ../samba-common.templates:3 +msgid "If you leave this option blank, your smb.conf will not be changed." +msgstr "¤³¤Î¥ª¥×¥·¥ç¥ó¤ò¶õ¤Î¤Þ¤Þ¤Ë¤¹¤ë¤È¡¢smb.conf ¤ÏÊѹ¹¤µ¤ì¤Þ¤»¤ó¡£" + +#. Description +#: ../samba-common.templates:13 +msgid "Character Set for DOS clients" +msgstr "DOS ¥¯¥é¥¤¥¢¥ó¥È¸þ¤±¤Îʸ»ú¥»¥Ã¥È" + +#. Description +#: ../samba-common.templates:13 +msgid "" +"You currently have a \"client code page\" set in your smb.conf. In Samba " +"3.0, this option is replaced by the option \"dos charset\". Please specify " +"the character set you wish to use for this new option. In most cases, the " +"default chosen for you will be sufficient. Note that this option is not " +"needed to support Windows clients, it is only for DOS clients. If you leave " +"this option blank, your smb.conf will not be changed." +msgstr "" +"¸½ºß¡¢smb.conf ¤ËÀßÄêºÑ¤ß¤Î \"client code page\" ¤¬¤¢¤ê¤Þ¤¹¡£Samba 3.0 ¤Ç¤Ï¡¢" +"¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï¿·¤·¤¤¥ª¥×¥·¥ç¥ó \"dos charset\" ¤ËÃÖ¤´¹¤¨¤é¤ì¤Æ¤¤¤Þ¤¹¡£¤³¤Î" +"¿·¤·¤¤¥ª¥×¥·¥ç¥ó¤Î¤¿¤á¤Ë¡¢´õ˾¤¹¤ëʸ»ú¥»¥Ã¥È¤ò»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£¤Û¤È¤ó¤É¤Î¾ì" +"¹ç¡¢¥Ç¥Õ¥©¥ë¥È¤ÎÁªÂò¤Î¤Þ¤Þ¤Ç½½Ê¬¤Ç¤·¤ç¤¦¡£¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï Windows ¥¯¥é¥¤¥¢¥ó" +"¥È¥µ¥Ý¡¼¥È¤Ë¤ÏɬÍפʤ¯¡¢DOS ¥¯¥é¥¤¥¢¥ó¥È¤Î¤ß¤Î¤¿¤á¤Ç¤¢¤ë¤³¤È¤òÃí°Õ¤·¤Æ¤ª¤¤Þ" +"¤¹¡£¤³¤Î¥ª¥×¥·¥ç¥ó¤ò¶õ¤Î¤Þ¤Þ¤Ë¤¹¤ë¤È¡¢smb.conf ¤ÏÊѹ¹¤µ¤ì¤Þ¤»¤ó¡£" + +#. Description +#: ../samba-common.templates:24 +msgid "Modify smb.conf to use WINS settings from DHCP?" +msgstr "DHCP ¤«¤é WINS ÀßÄê¤ò»È¤¦¤è¤¦ smb.conf ¤òÊѹ¹¤·¤Þ¤¹¤«?" + +#. Description +#: ../samba-common.templates:24 +msgid "" +"If your computer gets IP address information from a DHCP server on the " +"network, the DHCP server may also provide information about WINS servers " +"(\"NetBIOS name servers\") present on the network. This requires a change " +"to your smb.conf file so that DHCP-provided WINS settings will automatically " +"be read from /etc/samba/dhcp.conf." +msgstr "" +"¤¢¤Ê¤¿¤Î¥³¥ó¥Ô¥å¡¼¥¿¤¬¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î DHCP ¥µ¡¼¥Ð¤«¤é IP ¥¢¥É¥ì¥¹¾ðÊó¤ò¼èÆÀ" +"¤·¤Æ¤¤¤ë¤Î¤Ç¤¢¤ì¤Ð¡¢DHCP ¥µ¡¼¥Ð¤Ï¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Ë¤¢¤ë WINS ¥µ¡¼¥Ð (NetBIOS " +"¥Í¡¼¥à¥µ¡¼¥Ð) ¤Ë¤Ä¤¤¤Æ¤Î¾ðÊó¤òÄ󶡤¹¤ë¤³¤È¤â¤Ç¤¤Þ¤¹¡£DHCP ¤ÇÄ󶡤µ¤ì¤ë WINS " +"ÀßÄê¤Ï /etc/samba/dhcp.conf ¤«¤é¼«Æ°Åª¤ËÆɤ߹þ¤Þ¤ì¤ë¤¿¤á¡¢smb.conf ¥Õ¥¡¥¤¥ë¤ò" +"Êѹ¹¤¹¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£" + +#. Description +#: ../samba-common.templates:24 +msgid "" +"You must have the dhcp3-client package installed to take advantage of this " +"feature." +msgstr "" +"¤³¤Îµ¡Ç½¤ò»È¤¦¤¿¤á¤Ë¤Ï¡¢dhcp3-client ¥Ñ¥Ã¥±¡¼¥¸¤¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¤¤¤ëɬÍפ¬" +"¤¢¤ê¤Þ¤¹¡£" + +#. Description +#: ../samba-common.templates:37 +msgid "Configure smb.conf through debconf?" +msgstr "debconf ¤òÄ̤·¤Æ smb.conf ¤òÀßÄꤷ¤Þ¤¹¤«?" + +#. Description +#: ../samba-common.templates:37 +msgid "" +"The rest of the configuration of Samba deals with questions that affect " +"parameters in /etc/samba/smb.conf, which is the file used to configure the " +"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " +"line or an option that spans multiple lines, which could confuse debconf and " +"require you to edit your smb.conf by hand to get it working again." +msgstr "" +"Samba ¤ÎÀßÄê¤Î»Ä¤ê¤ÎÉôʬ¤Ï¡¢Samba ¥×¥í¥°¥é¥à (nmbd ¤ª¤è¤Ó smbd) ¤òÀßÄꤹ¤ë¤Î" +"¤Ë»È¤¦¥Õ¥¡¥¤¥ë /etc/samba/smb.conf ¤Ë¤¢¤ë¥Ñ¥é¥á¡¼¥¿¤Ë±Æ¶Á¤¹¤ë¼ÁÌä¤Ç¤¹¡£¸½ºß" +"¤Î smb.conf ¤Ï¡¢'include' ¹Ô¤Þ¤¿¤ÏÊ£¿ô¹Ô¤Ë¤Þ¤¿¤¬¤ë¥ª¥×¥·¥ç¥ó¤ò´Þ¤ó¤Ç¤¤¤Þ¤¹¡£" +"¤³¤ì¤Ï debconf ¤òº®Í𤵤»¤ë²ÄǽÀ¤¬¤¢¤ê¡¢ºÆ¤Ó debconf ¤¬ºîÆ°¤¹¤ë¤è¤¦¤Ë¤¹¤Ù¤¯ " +"smb.conf ¤Î¼êÆ°¤Ç¤Î½¤Àµ¤òɬÍפȤ·¤Þ¤¹¡£" + +#. Description +#: ../samba-common.templates:37 +msgid "" +"If you don't use debconf to configure smb.conf, you will have to handle any " +"configuration changes yourself, and will not be able to take advantage of " +"periodic configuration enhancements. Therefore, use of debconf is " +"recommended if possible." +msgstr "" +"smb.conf ¤ÎÀßÄê¤Ë debconf ¤ò»È¤ï¤Ê¤¤¾ì¹ç¡¢¤¹¤Ù¤Æ¤ÎÀßÄê¤ÎÊѹ¹¤ò¤¢¤Ê¤¿¼«¿È¤¬ÌÌ" +"Åݤò¸«¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£¤³¤ì¤ÏÄê´üŪ¤ÊÀßÄê²þÁ±¤Ë¤Ï¸þ¤¤¤Æ¤¤¤Þ¤»¤ó¡£¤½¤Î¤¿¤á¡¢" +"²Äǽ¤Ê¤é debconf ¤ò»È¤¦¤Î¤¬¤ª´«¤á¤Ç¤¹¡£" + +#. Description +#: ../samba-common.templates:52 +msgid "Workgroup/Domain Name?" +msgstr "¥ï¡¼¥¯¥°¥ë¡¼¥×/¥É¥á¥¤¥ó̾¤Ï²¿¤Ç¤¹¤«?" + +#. Description +#: ../samba-common.templates:52 +msgid "" +"This controls what workgroup your server will appear to be in when queried " +"by clients. Note that this parameter also controls the Domain name used with " +"the security=domain setting." +msgstr "" +"¤³¤ì¤Ï¥¯¥é¥¤¥¢¥ó¥È¤«¤é¾È²ñ¤µ¤ì¤¿ºÝ¤Ë¤¢¤Ê¤¿¤Î¥µ¡¼¥Ð¤¬¸½¤ì¤ë¥ï¡¼¥¯¥°¥ë¡¼¥×¤òÀ©" +"¸æ¤·¤Þ¤¹¡£¤³¤Î¥Ñ¥é¥á¡¼¥¿¤Ï security=domain ÀßÄ꤬»È¤ï¤ì¤¿¤È¤¤Î¥É¥á¥¤¥ó̾¤âÀ©" +"¸æ¤·¤Þ¤¹¡£" + +#. Description +#: ../samba-common.templates:60 +msgid "Use password encryption?" +msgstr "¥Ñ¥¹¥ï¡¼¥É¤Î°Å¹æ²½¤ò»È¤¤¤Þ¤¹¤«?" + +#. Description +#: ../samba-common.templates:60 +msgid "" +"Recent Windows clients communicate with SMB servers using encrypted " +"passwords. If you want to use clear text passwords you will need to change a " +"parameter in your Windows registry. It is recommended that you use encrypted " +"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " +"and that you set passwords in there for each user using the smbpasswd " +"command." +msgstr "" +"ºÇ¶á¤Î Windows ¥¯¥é¥¤¥¢¥ó¥È¤Ï°Å¹æ²½¤µ¤ì¤¿¥Ñ¥¹¥ï¡¼¥É¤ò»È¤Ã¤Æ SMB ¥µ¡¼¥Ð¤È¤ä¤ê" +"¼è¤ê¤·¤Þ¤¹¡£¥¯¥ê¥¢¥Æ¥¥¹¥È¥Ñ¥¹¥ï¡¼¥É¤ò»È¤¤¤¿¤¤¾ì¹ç¤Ï¡¢¤¢¤Ê¤¿¤Î Windows ¤Î¥ì¥¸" +"¥¹¥È¥ê¤Î¥Ñ¥é¥á¡¼¥¿¤òÊѹ¹¤¹¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£°Å¹æ²½¤µ¤ì¤¿¥Ñ¥¹¥ï¡¼¥É¤ò»È¤¦¤³¤È" +"¤ò¿ä¾©¤·¤Þ¤¹¡£¤³¤¦¤¹¤ë¾ì¹ç¡¢Í¸ú¤Ê /etc/samba/smbpasswd ¥Õ¥¡¥¤¥ë¤¬¤¢¤ë¤³¤È¤ò" +"³Îǧ¤·¡¢³Æ¥æ¡¼¥¶¤Î¥Ñ¥¹¥ï¡¼¥É¤Ï smbpasswd ¥³¥Þ¥ó¥É¤ò»È¤Ã¤ÆÀßÄꤷ¤Þ¤¹¡£" + +#. Description +#: ../samba.templates:4 +msgid "Create samba password database, /var/lib/samba/passdb.tdb?" +msgstr "Samba ¥Ñ¥¹¥ï¡¼¥É¥Ç¡¼¥¿¥Ù¡¼¥¹ /var/lib/samba/passdb.tdb ¤òºîÀ®¤·¤Þ¤¹¤«?" + +#. Description +#: ../samba.templates:4 +msgid "" +"To be compatible with the defaults in most versions of Windows, Samba must " +"be configured to use encrypted passwords. This requires user passwords to " +"be stored in a file separate from /etc/passwd. This file can be created " +"automatically, but the passwords must be added manually (by you or the user) " +"by running smbpasswd, and you must arrange to keep it up-to-date in the " +"future. If you do not create it, you will have to reconfigure samba (and " +"probably your client machines) to use plaintext passwords. See /usr/share/" +"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " +"details." +msgstr "" +"Windows ¤Î¤Û¤È¤ó¤É¤Î¥Ð¡¼¥¸¥ç¥ó¤Î¥Ç¥Õ¥©¥ë¥È¤È¸ß´¹À¤òÊݤĤ¿¤á¡¢Samba ¤Ï°Å¹æ²½" +"¤µ¤ì¤¿¥Ñ¥¹¥ï¡¼¥É¤ò»È¤Ã¤ÆÀßÄꤵ¤ì¤Þ¤¹¡£¤³¤ì¤Ï¥æ¡¼¥¶¤Î¥Ñ¥¹¥ï¡¼¥É¤ò /etc/passwd " +"¤È¤ÏÊ̤Υե¡¥¤¥ë¤Ë³ÊǼ¤¹¤ë¤³¤È¤òɬÍפȤ·¤Þ¤¹¡£¤³¤Î¥Õ¥¡¥¤¥ë¤Ï¼«Æ°Åª¤ËºîÀ®¤¹¤ë" +"¤³¤È¤¬¤Ç¤¤Þ¤¹¤¬¡¢¥Ñ¥¹¥ï¡¼¥É¤Ï smbpasswd ¤ò¼Â¹Ô¤·¤Æ¼êÆ°¤Ç (¤¢¤Ê¤¿¤¢¤ë¤¤¤Ï¥æ¡¼" +"¥¶¤¬) Äɲ䷤ʤ±¤ì¤Ð¤Ê¤é¤º¡¢¾Íè¤ËÅϤäƺǿ·¾õÂÖ¤òÊݤÁ³¤±¤ë¤è¤¦À°¤¨¤Æ¤ª¤¯É¬" +"Íפ¬¤¢¤ê¤Þ¤¹¡£¤³¤Î¥Õ¥¡¥¤¥ë¤òºîÀ®¤·¤Ê¤¤¾ì¹ç¡¢¥×¥ì¥¤¥ó¥Æ¥¥¹¥È¥Ñ¥¹¥ï¡¼¥É¤ò»È¤¦" +"¤è¤¦ Samba (¤ª¤è¤Ó¤ª¤½¤é¤¯¤¢¤Ê¤¿¤Î¥¯¥é¥¤¥¢¥ó¥È¥Þ¥·¥ó) ¤ÎºÆÀßÄ꤬ɬÍפǤ¹¡£¾Ü" +"ºÙ¤Ë¤Ä¤¤¤Æ¤Ï¡¢samba-doc ¥Ñ¥Ã¥±¡¼¥¸¤Ë¤¢¤ë /usr/share/doc/samba-doc/htmldocs/" +"ENCRYPTION.html ¤ò»²¾È¤·¤Æ¤¯¤À¤µ¤¤¡£" + +#. Description +#: ../samba.templates:17 +msgid "Samba's log files have moved." +msgstr "Samba ¤Î¥í¥°¥Õ¥¡¥¤¥ë¤Ï°ÜÆ°¤µ¤ì¤Þ¤·¤¿¡£" + +#. Description +#: ../samba.templates:17 +msgid "" +"Starting with the first packages of Samba 2.2 for Debian the log files for " +"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " +"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." +msgstr "" +"Debian ¸þ¤±¤Î Samba 2.2 ¤Î½é´ü¥Ñ¥Ã¥±¡¼¥¸¤«¤é¡¢Î¾ Samba ¥Ç¡¼¥â¥ó (nmbd ¤ª¤è¤Ó " +"smbd) ¤Î¥í¥°¥Õ¥¡¥¤¥ë¤Ï /var/log/samba ¤Ë³ÊǼ¤µ¤ì¤ë¤è¤¦¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£¥Õ¥¡¥¤" +"¥ë̾¤Ï nmbd ¤È smbd ¤ÇÊ̸Ĥˤʤë¤è¤¦¡¢log.nmbd ¤ª¤è¤Ó log.smbd ¤È¤Ê¤ê¤Þ¤¹¡£" + +#. Description +#: ../samba.templates:17 +msgid "" +"The old log files that were in /var/log/ will be moved to the new location " +"for you." +msgstr "/var/log/ ¤Ë¤¢¤Ã¤¿¸Å¤¤¥í¥°¥Õ¥¡¥¤¥ë¤Ï¿·¤·¤¤¾ì½ê¤Ë°ÜÆ°¤µ¤ì¤Þ¤¹¡£" + +#. Description +#: ../samba.templates:28 +msgid "Running nmbd from inetd is no longer supported" +msgstr "inetd ¤«¤é¤Î nmbd ¤Î¼Â¹Ô¤Ï¤â¤¦¥µ¥Ý¡¼¥È¤µ¤ì¤Þ¤»¤ó" + +#. Description +#: ../samba.templates:28 +msgid "" +"Your system was previously configured to start nmbd and smbd from inetd. As " +"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " +"If you have modified your /etc/init.d/samba startup script, you may need to " +"adjust it by hand now so that nmbd will start." +msgstr "" +"¤¢¤Ê¤¿¤Î¥·¥¹¥Æ¥à¤Ë¤Ï inetd ¤«¤é nmbd ¤ª¤è¤Ó smbd ¤òµ¯Æ°¤¹¤ë°ÊÁ°¤ÎÀßÄ꤬¤¢¤ê¤Þ" +"¤¹¡£¥Ð¡¼¥¸¥ç¥ó 2.999+3.0.alpha20-4 °Ê¹ß¤Ç¤Ï¡¢nmbd ¤Ï inetd ¤«¤é¤Ï¤â¤¦µ¯Æ°¤·¤Þ" +"¤»¤ó¡£/etc/init.d/samba ¥¹¥¿¡¼¥È¥¢¥Ã¥×¥¹¥¯¥ê¥×¥È¤òÊѹ¹¤·¤Æ¤¤¤ë¤Î¤Ç¤¢¤ì¤Ð¡¢" +"nmbd ¤¬µ¯Æ°¤¹¤ë¤è¤¦¼êÆ°¤ÇÄ´À°¤¹¤ëɬÍפ¬¤¢¤ë¤Ç¤·¤ç¤¦¡£" + +#. Choices +#: ../samba.templates:36 +msgid "daemons, inetd" +msgstr "¥Ç¡¼¥â¥ó, inetd" + +#. Description +#: ../samba.templates:38 +msgid "How do you want to run Samba?" +msgstr "¤É¤Î¤è¤¦¤Ë Samba ¤ò¼Â¹Ô¤·¤¿¤¤¤Ç¤¹¤«?" + +#. Description +#: ../samba.templates:38 +msgid "" +"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " +"daemon is the recommended approach." +msgstr "" +"Samba ¥Ç¡¼¥â¥ó smbd ¤ÏÄ̾ï¤Î¥Ç¡¼¥â¥ó¤È¤·¤Æ¤Î¼Â¹Ô¤Þ¤¿¤Ï inetd ¤«¤é¤Î¼Â¹Ô¤¬¤Ç¤" +"¤Þ¤¹¡£¥Ç¡¼¥â¥ó¤È¤·¤Æ¼Â¹Ô¤¹¤ë¤Î¤¬¤ª´«¤á¤Î¼êÃʤǤ¹¡£" + +#. Description +#: ../samba.templates:45 +msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" +msgstr "/etc/samba/smbpasswd ¤ò /var/lib/samba/passdb.tdb ¤Ë°ÜÆ°¤·¤Þ¤¹¤«?" + +#. Description +#: ../samba.templates:45 +msgid "" +"Samba 3.0 introduces a newer, more complete SAM database interface which " +"supersedes the /etc/samba/smbpasswd file. Would you like your existing " +"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " +"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " +"here." +msgstr "" +"Samba 3.0 ¤Ç¤Ï¡¢/etc/samba/smbpasswd ¥Õ¥¡¥¤¥ë¤ËÂå¤ï¤ë¡¢¤è¤ê¿·¤·¤¤¡¢¤è¤ê´°Á´" +"¤Ê SAM ¥Ç¡¼¥¿¥Ù¡¼¥¹¥¤¥ó¥¿¡¼¥Õ¥§¥¤¥¹¤¬Æ³Æþ¤µ¤ì¤Æ¤¤¤Þ¤¹¡£´û¸¤Î smbpasswd ¥Õ¥¡" +"¥¤¥ë¤ò /var/lib/samba/passdb.tdb ¤Ë°Ü¹Ô¤·¤Þ¤¹¤«? Ê̤Πpdb ¥Ð¥Ã¥¯¥¨¥ó¥É (LDAP " +"¤Ê¤É) ¤òÂå¤ï¤ê¤Ë·×²è¤·¤Æ¤¤¤ë¤Î¤Ç¤¢¤ì¤Ð¡¢¤³¤³¤Ç¤Ï '¤¤¤¤¤¨' ¤ÈÅú¤¨¤ë¤Ù¤¤Ç¤¹¡£" + +#. Description +#: ../swat.templates:3 +msgid "Your smb.conf will be re-written!" +msgstr "¤¢¤Ê¤¿¤Î smb.conf ¤Ï½ñ¤Ä¾¤µ¤ì¤Þ¤¹!" + +#. Description +#: ../swat.templates:3 +msgid "" +"SWAT will rewrite your smb.conf file. It will rearrange the entries and " +"delete all comments, include= and copy= options. If you have a carefully " +"crafted smb.conf then back it up or don't use SWAT!" +msgstr "" +"SWAT ¤Ï¤¢¤Ê¤¿¤Î smb.conf ¥Õ¥¡¥¤¥ë¤ò½ñ¤Ä¾¤·¤Þ¤¹¡£SWAT ¤Ï¥¨¥ó¥È¥ê¤òºÆÊÔÀ®¤·¡¢" +"¤¹¤Ù¤Æ¤Î¥³¥á¥ó¥È¤ª¤è¤Ó include= ¤È copy= ¥ª¥×¥·¥ç¥ó¤òºï½ü¤·¤Þ¤¹¡£¿µ½Å¤ËºîÀ®¤µ" +"¤ì¤¿ smb.conf ¤ò»ý¤Ã¤Æ¤¤¤ë¤Î¤Ç¤¢¤ì¤Ð¡¢¥Ð¥Ã¥¯¥¢¥Ã¥×¤·¤Æ¤ª¤¯¤«¡¢SWAT ¤ò»È¤ï¤Ê¤¤" +"¤Ç¤¯¤À¤µ¤¤!" diff --git a/packaging/Debian/debian-stable/po/nl.po b/packaging/Debian/debian-sarge/po/nl.po index 61e8742dbb..61e8742dbb 100644 --- a/packaging/Debian/debian-stable/po/nl.po +++ b/packaging/Debian/debian-sarge/po/nl.po diff --git a/packaging/Debian/debian-sarge/po/pt.po b/packaging/Debian/debian-sarge/po/pt.po new file mode 100644 index 0000000000..fa9f058ca2 --- /dev/null +++ b/packaging/Debian/debian-sarge/po/pt.po @@ -0,0 +1,295 @@ +# translation of pt.po to Portuguese +# translation of samba Debian debconf template to Portuguese +# Miguel Figueiredo <elmig@debianpt.org>, 2004. +# + +msgid "" +msgstr "" +"Project-Id-Version: samba 3.0.9-1\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2003-08-30 19:08-0500\n" +"PO-Revision-Date: 2005-01-05 19:25+0000\n" +"Last-Translator: Miguel Figueiredo <elmig@debianpt.org>\n" +"Language-Team: Portuguese <traduz@debianpt.org>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Description +#: ../samba-common.templates:3 +msgid "Character Set for Unix filesystem" +msgstr "Conjunto de caracteres para sistema de ficheiros UNIX" + +#. Description +#: ../samba-common.templates:3 +msgid "" +"You currently have a \"character set\" configured in your smb.conf. In " +"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " +"specify the character set you wish to use for theis new option, which " +"controls how Samba interprets filenames on the file system." +msgstr "" +"Actualmente tem um \"character set\" configurado no seu smb.conf. No " +"Samba 3.0, esta opção é substituÃda por uma nova opção, \"unix charset\". " +"Por favor especifique o conjunto de caracteres para utilizar com esta nova " +"opção, que controla como o Samba interpreta os nomes dos ficheiros no " +"sistema de ficheiros." + +#. Description +#: ../samba-common.templates:3 +msgid "If you leave this option blank, your smb.conf will not be changed." +msgstr "Se deixar esta opção vazia, o seu smb.conf não será alterado." + +#. Description +#: ../samba-common.templates:13 +msgid "Character Set for DOS clients" +msgstr "Conjunto de caracteres para clientes DOS" + +#. Description +#: ../samba-common.templates:13 +msgid "" +"You currently have a \"client code page\" set in your smb.conf. In Samba " +"3.0, this option is replaced by the option \"dos charset\". Please specify " +"the character set you wish to use for this new option. In most cases, the " +"default chosen for you will be sufficient. Note that this option is not " +"needed to support Windows clients, it is only for DOS clients. If you leave " +"this option blank, your smb.conf will not be changed." +msgstr "" +"Actualmente tem um \"client code page\" definido no seu smb.conf. No Samba " +"3.0, esta opção é substituÃda pela opção \"dos charset\". Por favor " +"especifique o conjunto de caracteres que quer utilizar para esta nova opção. " +"Na maioria dos casos, o valor por omissão escolhido para si será suficiente. " +"Note que esta opção não é necessária para suportar clientes em Windows, é " +"apenas para clientes em DOS. Se deixar esta opção vazia, o seu smb.conf " +"não será alterado." + +#. Description +#: ../samba-common.templates:24 +msgid "Modify smb.conf to use WINS settings from DHCP?" +msgstr "Modificar o smb.conf para utilizar definições de WINS a partir de DHCP?" + +#. Description +#: ../samba-common.templates:24 +msgid "" +"If your computer gets IP address information from a DHCP server on the " +"network, the DHCP server may also provide information about WINS servers " +"(\"NetBIOS name servers\") present on the network. This requires a change " +"to your smb.conf file so that DHCP-provided WINS settings will automatically " +"be read from /etc/samba/dhcp.conf." +msgstr "" +"Se o seu computador obtém a informação do endereço IP a partir de um " +"servidor de DHCP na rede, o servidor de DHCP pode também fornecer informação " +"acerca de servidores de WINS (\"servidor de nomes NetBIOS\") presentes na " +"rede. Isto requer uma alteração no seu ficheiro smb.conf de modo que as " +"definições de WINS fornecidas por DHCP sejam automaticamente lidas a partir " +"de /etc/samba/dhcp.conf." + +#. Description +#: ../samba-common.templates:24 +msgid "" +"You must have the dhcp3-client package installed to take advantage of this " +"feature." +msgstr "" +"Tem de ter o pacote dhcp3-client instalado para tirar vantagem desta " +"caracterÃstica." + +#. Description +#: ../samba-common.templates:37 +msgid "Configure smb.conf through debconf?" +msgstr "Configurar o smb.conf através de debconf?" + +#. Description +#: ../samba-common.templates:37 +msgid "" +"The rest of the configuration of Samba deals with questions that affect " +"parameters in /etc/samba/smb.conf, which is the file used to configure the " +"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " +"line or an option that spans multiple lines, which could confuse debconf and " +"require you to edit your smb.conf by hand to get it working again." +msgstr "" +"O resto da configuração de Samba trata de questões que afectam parâmetros " +"em /etc/samba/smb.conf, que é o ficheiro utilizado para configurar os " +"programas de Samba (nmbd e smbd). O seu smb.conf actual contém uma linha " +"'include' ou uma opção que se espalha em multiplas linhas, a qual pode " +"confundir o debconf e necessitar que você edite à mão o smb.conf par o ter " +"novamente operacional." + +#. Description +#: ../samba-common.templates:37 +msgid "" +"If you don't use debconf to configure smb.conf, you will have to handle any " +"configuration changes yourself, and will not be able to take advantage of " +"periodic configuration enhancements. Therefore, use of debconf is " +"recommended if possible." +msgstr "" +"Se não utilizar o debconf para configurar o smb.conf, terá de lidar você " +"mesmo com quaisquer alterações da configuração, e não poderá tirar partido " +"de melhorias de configuração periódicas. Assim sendo, a utilização do " +"debconf é remomendada se possÃvel." + +#. Description +#: ../samba-common.templates:52 +msgid "Workgroup/Domain Name?" +msgstr "Nome do Grupo de trabalho/DomÃnio ?" + +#. Description +#: ../samba-common.templates:52 +msgid "" +"This controls what workgroup your server will appear to be in when queried " +"by clients. Note that this parameter also controls the Domain name used with " +"the security=domain setting." +msgstr "" +"Isto controla qual o grupo de trabalho em que o seu servidor vai aparecer " +"quando questionado pelos clientes. Note que este parâmetro também controla " +"o nome de DomÃnio quando utilizado com a definição security=domain." + +#. Description +#: ../samba-common.templates:60 +msgid "Use password encryption?" +msgstr "Utilizar encriptação de passwords?" + +#. Description +#: ../samba-common.templates:60 +msgid "" +"Recent Windows clients communicate with SMB servers using encrypted " +"passwords. If you want to use clear text passwords you will need to change a " +"parameter in your Windows registry. It is recommended that you use encrypted " +"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " +"and that you set passwords in there for each user using the smbpasswd " +"command." +msgstr "" +"Os clientes de Windows recentes comunicam com servidores de SMB utilizando " +"passwords encriptadas. Se deseja utilizar passwords de texto puro você vai " +"necessitar alterar um parâmetro no seu registo do Windows. É recomendado que " +"utilize passwords encriptadas. Se o fizer, assegure-se que tem um ficheiro " +"/etc/samba/smbpasswd válido e que defina lá passwords para cada um dos " +"utilizadores utilizando o comando smbpasswd." + +#. Description +#: ../samba.templates:4 +msgid "Create samba password database, /var/lib/samba/passdb.tdb?" +msgstr "Criar base de dados de passwords samba, /var/lib/samba/passdb.tdb?" + +#. Description +#: ../samba.templates:4 +msgid "" +"To be compatible with the defaults in most versions of Windows, Samba must " +"be configured to use encrypted passwords. This requires user passwords to " +"be stored in a file separate from /etc/passwd. This file can be created " +"automatically, but the passwords must be added manually (by you or the user) " +"by running smbpasswd, and you must arrange to keep it up-to-date in the " +"future. If you do not create it, you will have to reconfigure samba (and " +"probably your client machines) to use plaintext passwords. See /usr/share/" +"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " +"details." +msgstr "" +"Para ser compatÃvel com valores por omissão na maioria das versões do " +"Windows, o Samba tem de ser configurado para utilizar passwords encriptadas. " +"Isto requer que as passwords de utilizador sejam guardadas num ficheiro " +"separado de /etc/passwd. Este ficheiro pode ser criado automaticamente, mas " +"as passwords têm de ser adicionadas manualmente (por si ou pelo utilizador) " +"executando o comando smbpasswd, e você tem de mantê-las actualizadas no " +"futuro. Se não o criar, você terá de reconfigurar o samba (e provavelmente " +"as máquinas clientes) para utilizar passwords de texto puro. Veja " +"/usr/share/doc/samba-doc/htmldocs/ENCRIPTION.html do pacote samba-doc para " +"mais detalhes." + +#. Description +#: ../samba.templates:17 +msgid "Samba's log files have moved." +msgstr "Os ficheiros de log de Samba foram movidos." + +#. Description +#: ../samba.templates:17 +msgid "" +"Starting with the first packages of Samba 2.2 for Debian the log files for " +"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " +"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." +msgstr "" +"Desde os primeiros pacotes para Debian de Samba 2.2 que os ficheiros de log " +"para ambos os daemons de Samba (nmbd e smbd) são agora guardados em " +"/var/log/samba/. Os nomes dos ficheiros são respectivamente log.nmbd e " +"log.smbd, para o nmbd e smbd." + +#. Description +#: ../samba.templates:17 +msgid "" +"The old log files that were in /var/log/ will be moved to the new location " +"for you." +msgstr "" +"Os ficheiros de log antigos que estavam em /var/log/ vão ser movidos, para " +"si, para a nova localização." + +#. Description +#: ../samba.templates:28 +msgid "Running nmbd from inetd is no longer supported" +msgstr "Executar o nmbd a partir de inetd já não é suportado" + +#. Description +#: ../samba.templates:28 +msgid "" +"Your system was previously configured to start nmbd and smbd from inetd. As " +"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " +"If you have modified your /etc/init.d/samba startup script, you may need to " +"adjust it by hand now so that nmbd will start." +msgstr "" +"O seu sistema foi previamente configurado para iniciar o nmbd e smbd a " +"partir de inetd. A partir da versão 2.999+3.0.alpha20-4, o nmbd já não " +"inicia a partir do inetd. Se você modificou o seu script de inicialização " +"/etc/init.d/samba, pode ter de o ajustar agora à mão de modo a que o nmbd " +"inicie." + +#. Choices +#: ../samba.templates:36 +msgid "daemons, inetd" +msgstr "daemons, inetd" + +#. Description +#: ../samba.templates:38 +msgid "How do you want to run Samba?" +msgstr "Como deseja correr o Samba?" + +#. Description +#: ../samba.templates:38 +msgid "" +"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " +"daemon is the recommended approach." +msgstr "" +"O daemon de Samba smbd pode correr como um daemon normal ou a partir de " +"inetd. Executá-lo como um daemon é a aproximação recomendada." + +#. Description +#: ../samba.templates:45 +msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" +msgstr "Mover /etc/samba/smbpasswd para /var/lib/samba/passdb.tdb?" + +#. Description +#: ../samba.templates:45 +msgid "" +"Samba 3.0 introduces a newer, more complete SAM database interface which " +"supersedes the /etc/samba/smbpasswd file. Would you like your existing " +"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " +"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " +"here." +msgstr "" +"" +"O Samba 3.0 introduz um novo e mais completo interface com a base de dados " +"SAM, que suplanta o ficheiro /etc/samba/smbpasswd. Deseja que o seu " +"ficheiro existente smbpasswd seja migrado para /var/lib/samba/passdb.tdb " +"para si? Se planeia utilizar em vez disso outro backend pdb (e.g., LDAP), " +"deve responder aqui 'no'." +#. Description +#: ../swat.templates:3 +msgid "Your smb.conf will be re-written!" +msgstr "A sua configuração smb.conf será re-escrita!" + +#. Description +#: ../swat.templates:3 +msgid "" +"SWAT will rewrite your smb.conf file. It will rearrange the entries and " +"delete all comments, include= and copy= options. If you have a carefully " +"crafted smb.conf then back it up or don't use SWAT!" +msgstr "" +"O SWAT irá reescrever o seu ficheiro smb.conf. Irá reordenar as entradas e " +"apagar todos os comentários, e opções include= e copy=. Se tem um smb.conf " +"cuidadosamente trabalhado faça uma cópia de segurança dele ou não utilize " +"o SWAT!" diff --git a/packaging/Debian/debian-sarge/po/pt_BR.po b/packaging/Debian/debian-sarge/po/pt_BR.po new file mode 100644 index 0000000000..1318c3f4e6 --- /dev/null +++ b/packaging/Debian/debian-sarge/po/pt_BR.po @@ -0,0 +1,309 @@ +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# +# Developers do not need to manually edit POT or PO files. +# +msgid "" +msgstr "" +"Project-Id-Version: samba\n" +"Report-Msgid-Bugs-To: debian-l10n-portuguese@lists.debian.org\n" +"POT-Creation-Date: 2003-08-30 19:08-0500\n" +"PO-Revision-Date: 2005-05-10 14:07-0300\n" +"Last-Translator: André Luís Lopes <andrelop@debian.org>\n" +"Language-Team: Debian-BR Project <debian-l10n-portuguese@lists.debian.org>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=ISO-8859-1\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Description +#: ../samba-common.templates:3 +msgid "Character Set for Unix filesystem" +msgstr "Conjunto de caracteres para sistema de arquivos Unix" + +#. Description +#: ../samba-common.templates:3 +msgid "" +"You currently have a \"character set\" configured in your smb.conf. In " +"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " +"specify the character set you wish to use for theis new option, which " +"controls how Samba interprets filenames on the file system." +msgstr "" +"Atualmente existe um \"conjunto de caracteres\" (\"character set\") " +"configurado em seu arquivo smb.conf. No Samba 3.0, esta opção foi " +"substituída por uma nova opção, a opção \"unix charset\". Por favor, " +"especifique o conjunto de caracteres a ser usado para essa nova opção, " +"a qual controla como o Samba interpreta nomes de arquivos no sistema de " +"arquivos." + +#. Description +#: ../samba-common.templates:3 +msgid "If you leave this option blank, your smb.conf will not be changed." +msgstr "" +"Caso você deixe esta opção em branco, seu arquivo smb.conf não será " +"modificado." + +#. Description +#: ../samba-common.templates:13 +msgid "Character Set for DOS clients" +msgstr "Conjunto de caracteres para clientes DOS" + +#. Description +#: ../samba-common.templates:13 +msgid "" +"You currently have a \"client code page\" set in your smb.conf. In Samba " +"3.0, this option is replaced by the option \"dos charset\". Please specify " +"the character set you wish to use for this new option. In most cases, the " +"default chosen for you will be sufficient. Note that this option is not " +"needed to support Windows clients, it is only for DOS clients. If you leave " +"this option blank, your smb.conf will not be changed." +msgstr "" +"Atualmente existe um \"código de página do cliente\" (\"client code page\") " +"definido em seu arquivo smb.conf. No Samba 3.0, essa opção foi substituída " +"pela opção \"dos charset\". Por favor, especifique o conjunto de caracteres " +"que você deseja usar para essa nova opção. Note que essa opção não é " +"necessária para suportar clientes Windows, mas sim válida somente para " +"clientes DOS. Caso você deixe essa opção em branco, seu arquivo smb.conf não " +"será modificado." + +#. Description +#: ../samba-common.templates:24 +msgid "Modify smb.conf to use WINS settings from DHCP?" +msgstr "Modificar smb.conf para usar configurações WINS fornecidas via DHCP ?" + +#. Description +#: ../samba-common.templates:24 +msgid "" +"If your computer gets IP address information from a DHCP server on the " +"network, the DHCP server may also provide information about WINS servers " +"(\"NetBIOS name servers\") present on the network. This requires a change " +"to your smb.conf file so that DHCP-provided WINS settings will automatically " +"be read from /etc/samba/dhcp.conf." +msgstr "" +"Caso seu computador obtenha as informações de endereçamento IP de um " +"servidor DHCP na rede, o servidor DHCP poderá também fornecer informações " +"sobre servidor WINS (\"Servidor de Nomes NetBIOS\") presentes na rede. Para " +"que o Samba leia as configurações WINS fornecidas pelo servidor DHCP " +"automaticamente do arquivo /etc/samba/dhcp.conf, é preciso modificar seu " +"arquivo smb.conf." + +#. Description +#: ../samba-common.templates:24 +msgid "" +"You must have the dhcp3-client package installed to take advantage of this " +"feature." +msgstr "" +"Você deve possuir o pacote dhcp3-client instalado para poder usar esse " +"recurso." + +#. Description +#: ../samba-common.templates:37 +msgid "Configure smb.conf through debconf?" +msgstr "Configurar o arquivo smb.conf através do debconf ?" + +#. Description +#: ../samba-common.templates:37 +msgid "" +"The rest of the configuration of Samba deals with questions that affect " +"parameters in /etc/samba/smb.conf, which is the file used to configure the " +"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " +"line or an option that spans multiple lines, which could confuse debconf and " +"require you to edit your smb.conf by hand to get it working again." +msgstr "" +"O restante da configuração do Samba lida com questões que afetam parâmetros " +"no arquivo /etc/samba/smb.conf, que é o arquivo usado para configurar os " +"programas Samba (nmbd e smbd). Seu arquivo smb.conf atual contém uma linha " +"'include' ou uma opção que ocupa diversas linhas, o que pode confundir o " +"debconf e requerer que você edite seu arquivo smb.conf manualmente para " +"torná-lo funcional novamente." + +#. Description +#: ../samba-common.templates:37 +msgid "" +"If you don't use debconf to configure smb.conf, you will have to handle any " +"configuration changes yourself, and will not be able to take advantage of " +"periodic configuration enhancements. Therefore, use of debconf is " +"recommended if possible." +msgstr "" +"Caso você opte por não usar o debconf para configurar o arquivo smb.conf, " +"será necessário que você lide com quaisquer mudanças de configurações " +"manualmente e você não poderá aproveitar os melhoramentos periódicos de " +"configuração. Por esse motivo, é recomendado usar o debconf, caso seja " +"possível." + +#. Description +#: ../samba-common.templates:52 +msgid "Workgroup/Domain Name?" +msgstr "Nome de Domínio/Grupo de Trabalho ?" + +#. Description +#: ../samba-common.templates:52 +msgid "" +"This controls what workgroup your server will appear to be in when queried " +"by clients. Note that this parameter also controls the Domain name used with " +"the security=domain setting." +msgstr "" +"Este parâmetro controla em qual grupo de trabalho (workgroup) seu servidor " +"parecerá estar quando uma pesquisa pelo mesmo for feita por clientes. Note " +"que este parâmetro também controla o nome de Domínio usado com a " +"configuração security=domain." + +#. Description +#: ../samba-common.templates:60 +msgid "Use password encryption?" +msgstr "Usar senhas criptografadas ?" + +#. Description +#: ../samba-common.templates:60 +msgid "" +"Recent Windows clients communicate with SMB servers using encrypted " +"passwords. If you want to use clear text passwords you will need to change a " +"parameter in your Windows registry. It is recommended that you use encrypted " +"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " +"and that you set passwords in there for each user using the smbpasswd " +"command." +msgstr "" +"Clientes Windows atuais comunicam-se com servidores SMB usando senhas " +"criptografadas. Caso você queira usar senhas em texto puro você precisará " +"modificar um parâmetro no registro de seu Windows. É recomendado que você " +"use senhas criptografadas. Caso as utilize, certifique-se de possuir um " +"arquivo /etc/samba/smbpasswd válido e que você tenha definido senhas no " +"mesmo para cada usuário, utilizando o comando smbpasswd." + +#. Description +#: ../samba.templates:4 +msgid "Create samba password database, /var/lib/samba/passdb.tdb?" +msgstr "Gerar a base de dados para senhas /var/lib/samba/passdb.tdb ?" + +#. Description +#: ../samba.templates:4 +msgid "" +"To be compatible with the defaults in most versions of Windows, Samba must " +"be configured to use encrypted passwords. This requires user passwords to " +"be stored in a file separate from /etc/passwd. This file can be created " +"automatically, but the passwords must be added manually (by you or the user) " +"by running smbpasswd, and you must arrange to keep it up-to-date in the " +"future. If you do not create it, you will have to reconfigure samba (and " +"probably your client machines) to use plaintext passwords. See /usr/share/" +"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " +"details." +msgstr "" +"Para compatibilidade com os padrões adotados em todas as versões atuais do " +"Windows, o Samba deve ser configurado para usar senhas criptografadas. Isso " +"requer que as senhas dos usuários sejam armazenadas em um arquivo diferente " +"do arquivo /etc/passwd. Esse arquivo pode ser criado automaticamente, mas " +"as senhas devem ser definidas manualmente (por você ou pelo usuário) " +"executando o utilitário smbpasswd. Você deve certificar-se de manter esse " +"arquivo atualizado futuramente. Caso você não crie esse arquivo, você " +"terá que reconfigurar o Samba (e provavelmente suas máquinas clientes) " +"para utilização de senhas em texto puro. Consulte a documentação do pacote " +"samba-doc em /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html para " +"maiores detalhes." + +#. Description +#: ../samba.templates:17 +msgid "Samba's log files have moved." +msgstr "Arquivos de log do Samba foram movidos." + +#. Description +#: ../samba.templates:17 +msgid "" +"Starting with the first packages of Samba 2.2 for Debian the log files for " +"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " +"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." +msgstr "" +"Desde os primeiros pacotes Debian do Samba 2.2, os arquivos de log para " +"ambos os daemons Samba (nmbd e smbd) são armazenados no diretório " +"/var/log/samba/. Os nomes desses arquivos são log.nmbd e log.smbd, para " +"o nmbd e para o smbd, respectivamente." + +#. Description +#: ../samba.templates:17 +msgid "" +"The old log files that were in /var/log/ will be moved to the new location " +"for you." +msgstr "" +"Os antigos arquivos de log que estavam no diretório /var/log/ serão " +"movidos para o novo local para você." + +#. Description +#: ../samba.templates:28 +msgid "Running nmbd from inetd is no longer supported" +msgstr "A execução do nmbd a partir do inetd não é mais suportada" + +#. Description +#: ../samba.templates:28 +msgid "" +"Your system was previously configured to start nmbd and smbd from inetd. As " +"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " +"If you have modified your /etc/init.d/samba startup script, you may need to " +"adjust it by hand now so that nmbd will start." +msgstr "" +"Seu sistema foi previamente configurado para iniciar os daemons nmbd e smbd " +"a partir do inetd. Desde a versão 2.999+3.0.alpha20-4, o nmbd não mais será " +"iniciado a partir do inetd. Caso você tenha modificado seu script de " +"inicialização /etc/init.d/samba, você precisará ajustá-lo manualmente " +"agora para que o nmbd seja iniciado." + +#. Choices +#: ../samba.templates:36 +msgid "daemons, inetd" +msgstr "daemons, inetd" + +#. Description +#: ../samba.templates:38 +msgid "How do you want to run Samba?" +msgstr "Como você deseja que o Samba seja executado ?" + +#. Description +#: ../samba.templates:38 +msgid "" +"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " +"daemon is the recommended approach." +msgstr "" +"O serviço Samba smbd pode ser executado como daemon normal ou a partir do " +"inetd. Executá-lo como daemon é o método recomendado." + +#. Description +#: ../samba.templates:45 +msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" +msgstr "Mover /etc/samba/smbpasswd para /var/lib/samba/passdb.tdb ?" + +#. Description +#: ../samba.templates:45 +msgid "" +"Samba 3.0 introduces a newer, more complete SAM database interface which " +"supersedes the /etc/samba/smbpasswd file. Would you like your existing " +"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " +"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " +"here." +msgstr "" +"O Samba 3.0 introduziu uma nova e mais completa interface de base de " +"dados SAM que substituiu o arquivo /etc/samba/smbpasswd. Você gostaria " +"que o arquivo smbpasswd existente fosse migrado para " +"/var/lib/samba/passdb.tdb para você ? Caso você planeje usar um outro " +"backend (como LDAP, por exemplo), não aceite mover o arquivo smbpasswd." + +#. Description +#: ../swat.templates:3 +msgid "Your smb.conf will be re-written!" +msgstr "Seu arquivo smb.conf será reescrito !" + +#. Description +#: ../swat.templates:3 +msgid "" +"SWAT will rewrite your smb.conf file. It will rearrange the entries and " +"delete all comments, include= and copy= options. If you have a carefully " +"crafted smb.conf then back it up or don't use SWAT!" +msgstr "" +"O SWAT irá reescrever seu arquivo smb.conf. Ele irá rearrumar as entradas e " +"apagar todos os comentários, opções include= e copy=. Caso você possua um " +"arquivo smb.conf cuidadosamente criado e comentado, faça uma cópia de " +"segurança (backup) do mesmo ou não use o SWAT !" diff --git a/packaging/Debian/debian-sarge/po/ru.po b/packaging/Debian/debian-sarge/po/ru.po new file mode 100644 index 0000000000..c40c1879c5 --- /dev/null +++ b/packaging/Debian/debian-sarge/po/ru.po @@ -0,0 +1,223 @@ +# translation of samba_3.0.14a-2_ru.po to Russian
+# Yuriy Talakan' <yt@amur.elektra.ru>, 2005.
+msgid ""
+msgstr ""
+"Project-Id-Version: samba_3.0.14a-2_ru\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2003-08-30 19:08-0500\n"
+"PO-Revision-Date: 2005-05-21 21:43+1000\n"
+"Last-Translator: Yuriy Talakan' <yt@amur.elektra.ru>\n"
+"Language-Team: Russian <debian-l10n-russian@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.9.1\n"
+
+#. Description
+#: ../samba-common.templates:3
+msgid "Character Set for Unix filesystem"
+msgstr "Кодировка Ð´Ð»Ñ Ñ„Ð°Ð¹Ð»Ð¾Ð²Ð¾Ð¹ ÑиÑтемы Unix"
+
+#. Description
+#: ../samba-common.templates:3
+msgid ""
+"You currently have a \"character set\" configured in your smb.conf. In "
+"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
+"specify the character set you wish to use for theis new option, which "
+"controls how Samba interprets filenames on the file system."
+msgstr "Ð¡ÐµÐ¹Ñ‡Ð°Ñ Ñƒ Ð²Ð°Ñ ÐµÑÑ‚ÑŒ Ð¾Ð¿Ñ†Ð¸Ñ \"character set\" в smb.conf. Ð’ Samba 3.0, Ñта Ð¾Ð¿Ñ†Ð¸Ñ Ð·Ð°Ð¼ÐµÐ½ÐµÐ½Ð° на \"unix charset\". Укажите кодировку, которую вы желаете иÑпользовать Ð´Ð»Ñ Ñтой новой опции. Она отвечает за то, как Samba интерпретирует имена файлов в файловой ÑиÑтеме."
+
+#. Description
+#: ../samba-common.templates:3
+msgid "If you leave this option blank, your smb.conf will not be changed."
+msgstr "ЕÑли вы оÑтавите опцию пуÑтой, ваш smb.conf не будет изменен."
+
+#. Description
+#: ../samba-common.templates:13
+msgid "Character Set for DOS clients"
+msgstr "Кодировка Ð´Ð»Ñ ÐºÐ»Ð¸ÐµÐ½Ñ‚Ð¾Ð² DOS"
+
+#. Description
+#: ../samba-common.templates:13
+msgid ""
+"You currently have a \"client code page\" set in your smb.conf. In Samba "
+"3.0, this option is replaced by the option \"dos charset\". Please specify "
+"the character set you wish to use for this new option. In most cases, the "
+"default chosen for you will be sufficient. Note that this option is not "
+"needed to support Windows clients, it is only for DOS clients. If you leave "
+"this option blank, your smb.conf will not be changed."
+msgstr "Ð¡ÐµÐ¹Ñ‡Ð°Ñ Ñƒ Ð²Ð°Ñ ÐµÑÑ‚ÑŒ Ð¾Ð¿Ñ†Ð¸Ñ \"client code page\" в smb.conf. Ð’ Samba 3.0, Ñта Ð¾Ð¿Ñ†Ð¸Ñ Ð·Ð°Ð¼ÐµÐ½ÐµÐ½Ð° на \"dos charset\". Укажите кодировку, которую вы желаете иÑпользовать Ð´Ð»Ñ Ñтой новой опции. Ð’ большинÑтве Ñлучаев Ð·Ð½Ð°Ñ‡ÐµÐ½Ð¸Ñ Ð¿Ð¾ умолчанию будет доÑтаточно. Запомните, что Ñта Ð¾Ð¿Ñ†Ð¸Ñ Ð½Ðµ нужна Ð´Ð»Ñ Ð¿Ð¾Ð´Ð´ÐµÑ€Ð¶ÐºÐ¸ клиентов Windows, она только Ð´Ð»Ñ ÐºÐ»Ð¸ÐµÐ½Ñ‚Ð¾Ð² DOS. ЕÑли вы оÑтавите опцию пуÑтой, ваш smb.conf не будет изменен."
+
+#. Description
+#: ../samba-common.templates:24
+msgid "Modify smb.conf to use WINS settings from DHCP?"
+msgstr "Изменить smb.conf Ð´Ð»Ñ Ð¸ÑÐ¿Ð¾Ð»ÑŒÐ·Ð¾Ð²Ð°Ð½Ð¸Ñ Ð½Ð°Ñтроек WINS из DHCP?"
+
+#. Description
+#: ../samba-common.templates:24
+msgid ""
+"If your computer gets IP address information from a DHCP server on the "
+"network, the DHCP server may also provide information about WINS servers "
+"(\"NetBIOS name servers\") present on the network. This requires a change "
+"to your smb.conf file so that DHCP-provided WINS settings will automatically "
+"be read from /etc/samba/dhcp.conf."
+msgstr "ЕÑли ваш компьютер получает информацию о Ñвоем IP-адреÑе от Ñервера DHCP через Ñеть, то DHCP-Ñервер также может предоÑтавлÑÑ‚ÑŒ информацию о Ñерверах WINS(\"Ñерверы имен NetBIOS\"), приÑутÑтвующих в Ñети. Ðто требует внеÑÐµÐ½Ð¸Ñ Ð¸Ð·Ð¼ÐµÐ½ÐµÐ½Ð¸Ð¹ в ваш файл smb.conf, чтобы предоÑтавленные через DHCP наÑтройки WINS автоматичеÑки читалиÑÑŒ из /etc/samba/dhcp.conf."
+
+#. Description
+#: ../samba-common.templates:24
+msgid ""
+"You must have the dhcp3-client package installed to take advantage of this "
+"feature."
+msgstr "Чтобы воÑпользоватьÑÑ Ñтой возможноÑтью, вы должны уÑтановить пакет dhcp3-client."
+
+#. Description
+#: ../samba-common.templates:37
+msgid "Configure smb.conf through debconf?"
+msgstr "ÐаÑтроить smb.conf через debconf?"
+
+#. Description
+#: ../samba-common.templates:37
+msgid ""
+"The rest of the configuration of Samba deals with questions that affect "
+"parameters in /etc/samba/smb.conf, which is the file used to configure the "
+"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
+"line or an option that spans multiple lines, which could confuse debconf and "
+"require you to edit your smb.conf by hand to get it working again."
+msgstr "ОÑтавшаÑÑÑ Ñ‡Ð°ÑÑ‚ÑŒ наÑтройки Samba ÑоÑтоит из вопроÑов, которые затрагивают параметры в /etc/samba/smb.conf. Ðтот файл иÑпользуетÑÑ Ð´Ð»Ñ Ð½Ð°Ñтройки программ Samba (nmbd и smbd.) Ваш текущий smb.conf Ñодержит Ñтроку 'include' или опцию, ÐºÐ¾Ñ‚Ð¾Ñ€Ð°Ñ ÑоÑтоит из неÑкольких Ñтрок. Ðто может Ñмутить debconf и потребовать от Ð²Ð°Ñ Ñ€ÑƒÑ‡Ð½Ð¾Ð³Ð¾ Ñ€ÐµÐ´Ð°ÐºÑ‚Ð¸Ñ€Ð¾Ð²Ð°Ð½Ð¸Ñ Ð²Ð°ÑˆÐµÐ³Ð¾ smb.conf Ð´Ð»Ñ Ð²Ð¾ÑÑÑ‚Ð°Ð½Ð¾Ð²Ð»ÐµÐ½Ð¸Ñ Ñ€Ð°Ð±Ð¾Ñ‚Ð¾ÑпоÑобноÑти."
+
+#. Description
+#: ../samba-common.templates:37
+msgid ""
+"If you don't use debconf to configure smb.conf, you will have to handle any "
+"configuration changes yourself, and will not be able to take advantage of "
+"periodic configuration enhancements. Therefore, use of debconf is "
+"recommended if possible."
+msgstr "ЕÑли вы не иÑпользуете debconf Ð´Ð»Ñ Ð½Ð°Ñтройки smb.conf, то должны ÑамоÑтоÑтельно позаботитьÑÑ Ð¾Ð±Ð¾ вÑех изменениÑÑ… наÑтроек и не Ñможете воÑпользоватьÑÑ Ð¿Ñ€ÐµÐ¸Ð¼ÑƒÑ‰ÐµÑтвами периодичеÑкого ÑƒÐ»ÑƒÑ‡ÑˆÐµÐ½Ð¸Ñ Ð½Ð°Ñтроек. Таким образом, рекомендуетÑÑ Ð¿Ð¾ возможноÑти иÑпользовать debconf."
+
+#. Description
+#: ../samba-common.templates:52
+msgid "Workgroup/Domain Name?"
+msgstr "Ð˜Ð¼Ñ Ñ€Ð°Ð±Ð¾Ñ‡ÐµÐ¹ группы/домена?"
+
+#. Description
+#: ../samba-common.templates:52
+msgid ""
+"This controls what workgroup your server will appear to be in when queried "
+"by clients. Note that this parameter also controls the Domain name used with "
+"the security=domain setting."
+msgstr "Задает рабочую группу, в которой поÑвитÑÑ Ð²Ð°Ñˆ Ñервер, когда его увидÑÑ‚ клиенты. Обратите внимение, что Ñтот параметр также задает Ð¸Ð¼Ñ Ð´Ð¾Ð¼ÐµÐ½Ð°, которое иÑпользуетÑÑ Ð¿Ñ€Ð¸ security=domain."
+
+#. Description
+#: ../samba-common.templates:60
+msgid "Use password encryption?"
+msgstr "ИÑпользовать шифрацию паролей?"
+
+#. Description
+#: ../samba-common.templates:60
+msgid ""
+"Recent Windows clients communicate with SMB servers using encrypted "
+"passwords. If you want to use clear text passwords you will need to change a "
+"parameter in your Windows registry. It is recommended that you use encrypted "
+"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
+"and that you set passwords in there for each user using the smbpasswd "
+"command."
+msgstr "Современные клиенты Windows общаютÑÑ Ñ Ñерверами SMB иÑÐ¿Ð¾Ð»ÑŒÐ·ÑƒÑ ÑˆÐ¸Ñ„Ñ€Ð¾Ð²Ð°Ð½Ð½Ñ‹Ðµ пароли. ЕÑли вы пожелаете иÑпользовать открытые пароли, вам придетÑÑ Ð¸Ð·Ð¼ÐµÐ½Ð¸Ñ‚ÑŒ параметр в рееÑтре Windows. РекомендуетÑÑ Ð¸Ñпользовать шифрованные пароли. Ð’ Ñтом Ñлучае убедитеÑÑŒ, что у Ð²Ð°Ñ Ð¿Ñ€Ð°Ð²Ð¸Ð»ÑŒÐ½Ñ‹Ð¹ файл /etc/samba/smbpasswd и что вы уÑтановили там пароли Ð´Ð»Ñ ÐºÐ°Ð¶Ð´Ð¾Ð³Ð¾ Ð¿Ð¾Ð»ÑŒÐ·Ð¾Ð²Ð°Ñ‚ÐµÐ»Ñ ÐºÐ¾Ð¼Ð°Ð½Ð´Ð¾Ð¹ smbpasswd."
+
+#. Description
+#: ../samba.templates:4
+msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
+msgstr "Создать базу данных паролей samba, /var/lib/samba/passdb.tdb?"
+
+#. Description
+#: ../samba.templates:4
+msgid ""
+"To be compatible with the defaults in most versions of Windows, Samba must "
+"be configured to use encrypted passwords. This requires user passwords to "
+"be stored in a file separate from /etc/passwd. This file can be created "
+"automatically, but the passwords must be added manually (by you or the user) "
+"by running smbpasswd, and you must arrange to keep it up-to-date in the "
+"future. If you do not create it, you will have to reconfigure samba (and "
+"probably your client machines) to use plaintext passwords. See /usr/share/"
+"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
+"details."
+msgstr "Ð”Ð»Ñ ÑовмеÑтимоÑти Ñо значением по умолчанию в большинÑтве верÑий Windows, Samba должна быть наÑтроена на иÑпользование шифрованных паролей. Ðто требует Ñ…Ñ€Ð°Ð½ÐµÐ½Ð¸Ñ Ð¿Ð¾Ð»ÑŒÐ·Ð¾Ð²Ð°Ñ‚ÐµÐ»ÑŒÑких паролей в файле, отдельном от /etc/passwd. Ðтот файл может быть Ñоздан автоматичеÑки, но пароли должны быть добавлены вручную (вами или пользователем) поÑредÑтвом запуÑка smbpasswd, и вы должны заботитьÑÑ Ð¾ поддержании его в актуальном ÑоÑтоÑнии в будущем. ЕÑли вы не Ñоздадите его, то должны перенаÑтроить samba (и вероÑтно ваши клиентÑкие машины) на иÑпользование открытых паролей. Более подробно Ñмотрите в /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html из пакета samba-doc."
+
+#. Description
+#: ../samba.templates:17
+msgid "Samba's log files have moved."
+msgstr "log-файлы Samba перемеÑтилиÑÑŒ."
+
+#. Description
+#: ../samba.templates:17
+msgid ""
+"Starting with the first packages of Samba 2.2 for Debian the log files for "
+"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
+"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
+msgstr "ÐÐ°Ñ‡Ð¸Ð½Ð°Ñ Ñ Ð¿ÐµÑ€Ð²Ñ‹Ñ… пакетов Samba 2.2 Ð´Ð»Ñ Debian, log-файлы Ð´Ð»Ñ Ð´ÐµÐ¼Ð¾Ð½Ð¾Ð² Samba (nmbd и smbd) хранÑÑ‚ÑÑ Ñ‚ÐµÐ¿ÐµÑ€ÑŒ в /var/log/samba/. Файлы называютÑÑ log.nmbd и log.smbd Ð´Ð»Ñ nmbd и smbd ÑоответÑтвенно."
+
+#. Description
+#: ../samba.templates:17
+msgid ""
+"The old log files that were in /var/log/ will be moved to the new location "
+"for you."
+msgstr "Старые log-файлы, которые были в /var/log/, будут перемещены в новое Ð´Ð»Ñ Ð²Ð°Ñ Ð¼ÐµÑто."
+
+#. Description
+#: ../samba.templates:28
+msgid "Running nmbd from inetd is no longer supported"
+msgstr "ЗапуÑк nmbd из inetd больше не поддерживаетÑÑ"
+
+#. Description
+#: ../samba.templates:28
+msgid ""
+"Your system was previously configured to start nmbd and smbd from inetd. As "
+"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. "
+"If you have modified your /etc/init.d/samba startup script, you may need to "
+"adjust it by hand now so that nmbd will start."
+msgstr "Ваша ÑиÑтема была ранее наÑтроена на запуÑк nmbd и smbd из inetd. nmbd Ñ Ð²ÐµÑ€Ñии 2.999+3.0.alpha20-4 больше не запуÑкаетÑÑ Ð¸Ð· inetd. ЕÑли вы изменили ваш Ñтартовый Ñкрипт /etc/init.d/samba, вам необходимо откорректировать его вручную, чтобы nmbd запуÑкалÑÑ."
+
+#. Choices
+#: ../samba.templates:36
+msgid "daemons, inetd"
+msgstr "daemons, inetd"
+
+#. Description
+#: ../samba.templates:38
+msgid "How do you want to run Samba?"
+msgstr "Как вы желаете запуÑкать Samba?"
+
+#. Description
+#: ../samba.templates:38
+msgid ""
+"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
+"daemon is the recommended approach."
+msgstr "Samba-демон smbd может запуÑкатьÑÑ ÐºÐ°Ðº обычный демон или из inetd. Рекомендуем выбрать запуÑк в качеÑтве демона."
+
+#. Description
+#: ../samba.templates:45
+msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
+msgstr "ПеремеÑтить /etc/samba/smbpasswd в /var/lib/samba/passdb.tdb?"
+
+#. Description
+#: ../samba.templates:45
+msgid ""
+"Samba 3.0 introduces a newer, more complete SAM database interface which "
+"supersedes the /etc/samba/smbpasswd file. Would you like your existing "
+"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you "
+"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
+"here."
+msgstr "Samba 3.0 приноÑит новый, более полный Ð¸Ð½Ñ‚ÐµÑ€Ñ„ÐµÐ¹Ñ Ð±Ð°Ð·Ñ‹ данных SAM, который заменÑет Ñобой файл /etc/samba/smbpasswd. Желаете, чтобы ваш ÑущеÑтвующий файл smbpasswd мигрировал в /var/lib/samba/passdb.tdb? ЕÑли вы планируете вмеÑто него иÑпользовать другой Ð¸Ð½Ñ‚ÐµÑ€Ñ„ÐµÐ¹Ñ pdb (например, LDAP), вы должны ответить здеÑÑŒ 'нет'."
+
+#. Description
+#: ../swat.templates:3
+msgid "Your smb.conf will be re-written!"
+msgstr "Ваш smb.conf будет перезапиÑан!"
+
+#. Description
+#: ../swat.templates:3
+msgid ""
+"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
+"delete all comments, include= and copy= options. If you have a carefully "
+"crafted smb.conf then back it up or don't use SWAT!"
+msgstr "SWAT перепишет ваш файл smb.conf. Он перегруппирует вÑе запиÑи и удалит вÑе комментарии, опции include= и copy=. ЕÑли у Ð²Ð°Ñ Ñ‚Ñ‰Ð°Ñ‚ÐµÐ»ÑŒÐ½Ð¾ Ñозданный smb.conf, то Ñохраните его в безопаÑном меÑте или не иÑпользуйте SWAT!"
+
diff --git a/packaging/Debian/debian-stable/po/templates.pot b/packaging/Debian/debian-sarge/po/templates.pot index 465f4719b0..465f4719b0 100644 --- a/packaging/Debian/debian-stable/po/templates.pot +++ b/packaging/Debian/debian-sarge/po/templates.pot diff --git a/packaging/Debian/debian-sarge/po/tr.po b/packaging/Debian/debian-sarge/po/tr.po new file mode 100644 index 0000000000..b18f325681 --- /dev/null +++ b/packaging/Debian/debian-sarge/po/tr.po @@ -0,0 +1,283 @@ +# Turkish translation of samba. +# This file is distributed under the same license as the samba package. +# Mehmet Türker <mturker@innova.com.tr>, 2004. +# +msgid "" +msgstr "" +"Project-Id-Version: samba\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2003-08-30 19:08-0500\n" +"PO-Revision-Date: 2004-06-01 09:42+0300\n" +"Last-Translator: Mehmet Türker <mturker@innova.com.tr>\n" +"Language-Team: Turkish <debian-l10n-turkish@lists.debian.org>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit" + +#. Description +#: ../samba-common.templates:3 +msgid "Character Set for Unix filesystem" +msgstr "Unix dosya sistemi için karakter seti" + +#. Description +#: ../samba-common.templates:3 +msgid "" +"You currently have a \"character set\" configured in your smb.conf. In " +"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " +"specify the character set you wish to use for theis new option, which " +"controls how Samba interprets filenames on the file system." +msgstr "" +"Halihazırda smb.conf yapılandırma dosyanızda \"character set\" ayarı mevcut. " +"Samba 3.0'da bu seçenek yenisiyle: \"unix charset\" ile deÄŸiÅŸtirildi. Lütfen " +"Samba'nın sistemdeki dosya isimlerini çevirirken dikkate aldığı bu yeni " +"seçenekle kullanılmasını istediÄŸiniz karakter setini girin." + +#. Description +#: ../samba-common.templates:3 +msgid "If you leave this option blank, your smb.conf will not be changed." +msgstr "Bu seçeneÄŸi boÅŸ bırakırsanız, smb.conf dosyanız deÄŸiÅŸtirilmeyecektir." + +#. Description +#: ../samba-common.templates:13 +msgid "Character Set for DOS clients" +msgstr "DOS istemcileri için karakter seti" + +#. Description +#: ../samba-common.templates:13 +msgid "" +"You currently have a \"client code page\" set in your smb.conf. In Samba " +"3.0, this option is replaced by the option \"dos charset\". Please specify " +"the character set you wish to use for this new option. In most cases, the " +"default chosen for you will be sufficient. Note that this option is not " +"needed to support Windows clients, it is only for DOS clients. If you leave " +"this option blank, your smb.conf will not be changed." +msgstr "" +"Halihazırda smb.conf yapılandırma dosyanızda \"client code page\" ayarı mevcut. " +"Samba 3.0'da bu seçenek \"dos charset\" seçeneÄŸiyle deÄŸiÅŸtirildi. Lütfen bu yeni " +"seçenekle beraber kullanmak için bir karakter seti seçin. ÇoÄŸu durumda öntanımlı " +"olarak seçilmiÅŸ bulunan seçenek uygundur. Aklınızda bulunsun bu seçenek Windows " +"istemcilerini desteklemek için gerekli deÄŸildir, sadece DOS istemcileri içindir. " +"EÄŸer bu seçeneÄŸi boÅŸ bırakırsanız smb.conf dosyanız deÄŸiÅŸtirilmeyecektir." + +#. Description +#: ../samba-common.templates:24 +msgid "Modify smb.conf to use WINS settings from DHCP?" +msgstr "" +"WINS ayarlarını DHCP'den kullanmak için smb.conf dosyasında deÄŸiÅŸiklik yapılsın mı?" + +#. Description +#: ../samba-common.templates:24 +msgid "" +"If your computer gets IP address information from a DHCP server on the " +"network, the DHCP server may also provide information about WINS servers " +"(\"NetBIOS name servers\") present on the network. This requires a change " +"to your smb.conf file so that DHCP-provided WINS settings will automatically " +"be read from /etc/samba/dhcp.conf." +msgstr "" +"EÄŸer bilgisayarınız IP adresini ağınızdaki bir DHCP sunucusundan alıyorsa, " +"DHCP sunucusu ayrıca ağınızda bulunan WINS sunucuları (\"NetBIOS alanadı " +"sunucuları\") hakkında da bilgi verebilir. Bu, smb.conf dosyanızda DHCP " +"tarafından sunulan WINS ayarlarının otomatik olarak /etc/samba/dhcp.conf " +"dosyasından okunmasını saÄŸlayan bir deÄŸiÅŸikliÄŸi gerektirir." + +#. Description +#: ../samba-common.templates:24 +msgid "" +"You must have the dhcp3-client package installed to take advantage of this " +"feature." +msgstr "" +"Bu özellikten yararlanabilmek için dhcp3-client paketinin kurulmuÅŸ olması gerekir." + +#. Description +#: ../samba-common.templates:37 +msgid "Configure smb.conf through debconf?" +msgstr "\"smb.conf\" dosyası debconf ile yapılandırılsın mı?" + +#. Description +#: ../samba-common.templates:37 +msgid "" +"The rest of the configuration of Samba deals with questions that affect " +"parameters in /etc/samba/smb.conf, which is the file used to configure the " +"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " +"line or an option that spans multiple lines, which could confuse debconf and " +"require you to edit your smb.conf by hand to get it working again." +msgstr "" +"Geri kalan Samba yapılandırması Samba uygulamalarını (nmbd ve smbd) yapılandırmak " +"için kullanılan /etc/samba/smb.conf dosyasındaki parametreleri etkileyen sorularla " +"devam edecektir. Mevcut smb.conf dosyası, debconf'u ÅŸaşırtabilecek ve smb.conf " +"dosyanızı elle deÄŸiÅŸtirilmesi zorunda kılacak bir 'include' satırı veya birden " +"fazla satır boyunca devam eden bir seçenek içeriyor." + +#. Description +#: ../samba-common.templates:37 +msgid "" +"If you don't use debconf to configure smb.conf, you will have to handle any " +"configuration changes yourself, and will not be able to take advantage of " +"periodic configuration enhancements. Therefore, use of debconf is " +"recommended if possible." +msgstr "" +"EÄŸer smb.conf'u yapılandırmak için debconf'u kullanmıyorsanız bütün yapılandırma " +"deÄŸiÅŸikliklerini kendiniz elle yapmanız gerekir. Bu durumda periyodik olarak " +"sunulan yapılandırma iyileÅŸtirmelerinden de yararlanamayacaksınız. Bu nedenlerle " +"eÄŸer mümkünse debconf kullanımı tavsiye edilir." + +#. Description +#: ../samba-common.templates:52 +msgid "Workgroup/Domain Name?" +msgstr "Çalışma Grubu/Etki Alanı Ä°smi?" + +#. Description +#: ../samba-common.templates:52 +msgid "" +"This controls what workgroup your server will appear to be in when queried " +"by clients. Note that this parameter also controls the Domain name used with " +"the security=domain setting." +msgstr "" +"Bu ayar, sunucunuzun istemciler tarafından sorgulandığında hangi Çalışma Grubu " +"içerisinde gözükeceÄŸini kontrol eder. Aklınızda bulunsun, bu parametre ayrıca " +"security=domain ayarı ile beraber kullanılacak Etki Alanını da kontrol eder." + +#. Description +#: ../samba-common.templates:60 +msgid "Use password encryption?" +msgstr "Parola ÅŸifrelenmesi kullanılsın mı?" + +#. Description +#: ../samba-common.templates:60 +msgid "" +"Recent Windows clients communicate with SMB servers using encrypted " +"passwords. If you want to use clear text passwords you will need to change a " +"parameter in your Windows registry. It is recommended that you use encrypted " +"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " +"and that you set passwords in there for each user using the smbpasswd " +"command." +msgstr "" +"Yeni Windows istemcileri SBM sunucularıyla ÅŸifrelenmiÅŸ parolalar kullanarak " +"iletiÅŸim kurarlar. EÄŸer düz metin parolaları kullanmak istiyorsanız Windows " +"registry içinde bir parametreyi deÄŸiÅŸtirmelisiniz. EÄŸer bu iÅŸlemi yapmışsanız, " +"geçerli bir /etc/samba/smbpasswd dosyanız olduÄŸundan ve buraya smbpasswd " +"komutu kullanarak bütün kullanıcılar için parola kaydı eklendiÄŸinden emin olun." + +#. Description +#: ../samba.templates:4 +msgid "Create samba password database, /var/lib/samba/passdb.tdb?" +msgstr "Samba parola veritabanı /var/lib/samba/passwd.tdb yaratılsın mı?" + +#. Description +#: ../samba.templates:4 +msgid "" +"To be compatible with the defaults in most versions of Windows, Samba must " +"be configured to use encrypted passwords. This requires user passwords to " +"be stored in a file separate from /etc/passwd. This file can be created " +"automatically, but the passwords must be added manually (by you or the user) " +"by running smbpasswd, and you must arrange to keep it up-to-date in the " +"future. If you do not create it, you will have to reconfigure samba (and " +"probably your client machines) to use plaintext passwords. See /usr/share/" +"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " +"details." +msgstr "" +"Windows'un çoÄŸu sürümüyle uyumlu olması için, Samba'nın ÅŸifreli parolaları " +"kullanmak üzere yapılandırılması gerekir. Bu iÅŸlem kullanıcı parolalarının " +"/etc/passwd dosyasından farklı bir yerde saklanmasını gerektirir. Bu dosya " +"otomatik olarak yaratılabilir, fakat parolaların (siz veya kullanıcı tarafından) " +"smbpasswd çalıştırılarak elle girilmesi ve gelecekte de güncel tutulması gerekir. " +"EÄŸer bunu yaratmazsanız, düz metin parolalar kullanabilmek için samba'yı (ve " +"muhtemelen istemci makineleri) yeniden yapılandırmanız gerekir. Daha ayrıntılı " +"bilgi için samba-doc paketinden çıkan /usr/share/doc/samba-doc/htmldocs/" +"ENCRYPTION.html'ye baÅŸvurun." + +#. Description +#: ../samba.templates:17 +msgid "Samba's log files have moved." +msgstr "Samba'nın günce dosyaları taşındı." + +#. Description +#: ../samba.templates:17 +msgid "" +"Starting with the first packages of Samba 2.2 for Debian the log files for " +"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " +"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." +msgstr "" +"Samba 2.2'nin ilk paketlerinden itibaren, Samba artalan süreçlerine (nmbd ve " +"smbd) ait Debian günce dosyaları artık /var/log/samba altında saklanıyor. Bu " +"dosyaların isimleri nmbd ve smbd için sırasıyla log.nmbd ve log.smbd'dir." + +#. Description +#: ../samba.templates:17 +msgid "" +"The old log files that were in /var/log/ will be moved to the new location " +"for you." +msgstr "" +"/var/log/ içinde bulunan eski günce dosyaları yeni bir konuma taşınacak." + +#. Description +#: ../samba.templates:28 +msgid "Running nmbd from inetd is no longer supported" +msgstr "Nmbd'nin inetd'den çalıştırılması artık desteklenmiyor" + +#. Description +#: ../samba.templates:28 +msgid "" +"Your system was previously configured to start nmbd and smbd from inetd. As " +"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " +"If you have modified your /etc/init.d/samba startup script, you may need to " +"adjust it by hand now so that nmbd will start." +msgstr "" +"Sisteminiz, nmbd ve smbd'yi inetd üzerinden çalıştıracak ÅŸekilde ayarlanmış. " +"Sürüm 2.999+3.0.alpha20-4'ten sonra artık nmbd inetd'den çalıştırılmıyor. " +"EÄŸer /etc/init.d/samba baÅŸlangıç betiÄŸini kendiniz düzenlediyseniz, nmbd'nin " +"çalışabilmesi için bu dosyayı elle ayarlamak zorunda kalabilirsiniz." + +#. Choices +#: ../samba.templates:36 +msgid "daemons, inetd" +msgstr "artalan süreçleri, inetd" + +#. Description +#: ../samba.templates:38 +msgid "How do you want to run Samba?" +msgstr "Samba'nın nasıl çalışmasını istersiniz?" + +#. Description +#: ../samba.templates:38 +msgid "" +"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " +"daemon is the recommended approach." +msgstr "" +"Samba artalan süreci smbd, normal bir artalan süreci olarak veya inetd'den " +"çalışabilir. Tavsiye edilen yaklaşım artalan süreci olarak çalıştırmaktır." + +#. Description +#: ../samba.templates:45 +msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" +msgstr "/etc/samba/smbpasswd /var/lib/samba/passwd.tdb'ye taşınsın mı?" + +#. Description +#: ../samba.templates:45 +msgid "" +"Samba 3.0 introduces a newer, more complete SAM database interface which " +"supersedes the /etc/samba/smbpasswd file. Would you like your existing " +"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " +"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " +"here." +msgstr "" +"Samba 3.0, /etc/samba/smbpasswd'nin yerini alan yeni ve daha eksiksiz bir SAM " +"veritabanı arayüzü ile birlikte geliyor. Mevcut smbpasswd dosyasının /var/lib/" +"samba/passdb.tbd dosyasına dönüştürülmesini ister misiniz? EÄŸer baÅŸka bir pdb " +"arkayüzü (ör. LDAP) kullanmayı planlıyorsanız, burada 'hayır' cevabını vermelisiniz." + +#. Description +#: ../swat.templates:3 +msgid "Your smb.conf will be re-written!" +msgstr "Smb.conf dosyanız tekrar yazılacak!" + +#. Description +#: ../swat.templates:3 +msgid "" +"SWAT will rewrite your smb.conf file. It will rearrange the entries and " +"delete all comments, include= and copy= options. If you have a carefully " +"crafted smb.conf then back it up or don't use SWAT!" +msgstr "" +"SWAT smb.conf dosyanızın üzerine yazacak. Bu iÅŸlem kayıtları tekrar düzenleyecek, " +"bütün yorumları, include= ve copy= seçeneklerini silecek. EÄŸer özel olarak " +"tasarladığınız bir smb.conf dosyanız varsa, bunu yedekleyin veya SWAT kullanmayın!" diff --git a/packaging/Debian/debian-sarge/python2.3-samba.files b/packaging/Debian/debian-sarge/python2.3-samba.files new file mode 100644 index 0000000000..82759d81b8 --- /dev/null +++ b/packaging/Debian/debian-sarge/python2.3-samba.files @@ -0,0 +1 @@ +usr/lib/python2.3/site-packages/ diff --git a/packaging/Debian/debian-sarge/rules b/packaging/Debian/debian-sarge/rules new file mode 100755 index 0000000000..25e598d185 --- /dev/null +++ b/packaging/Debian/debian-sarge/rules @@ -0,0 +1,362 @@ +#!/usr/bin/make -f +# +# Important modifications (introduction of a saved config.cache to +# solve build problems) introduced in Samba 2.2.1a-5. These +# modification were made by Steve Langasek <vorlon@netexpress.net>. +# +# config.cache *DISABLED* to solve problems caused incorrect settings +# --SSS +# +# + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +# This is the debhelper compatability version to use. +export DH_COMPAT=4 + +# This has to be exported to make some magic below work. +export DH_OPTIONS + +# Set the host and build architectures for use with config.cache loading, +# cross-building, etc. +DEB_HOST_GNU_TYPE := $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE := $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) +DEB_HOST_GNU_SYSTEM := $(shell dpkg-architecture -qDEB_HOST_GNU_SYSTEM) +DEB_BUILD_GNU_SYSTEM := $(shell dpkg-architecture -qDEB_BUILD_GNU_SYSTEM) + +export DEB_HOST_GNU_TYPE +export DEB_BUILD_GNU_TYPE +export DEB_HOST_GNU_SYSTEM +export DEB_BUILD_GNU_SYSTEM + +# Support the DEB_BUILD_OPTIONS variable +CFLAGS = -gstabs -Wall +INSTALL = install + +ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) + CFLAGS += -O0 +else + CFLAGS += -O2 +endif + +ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS))) + INSTALL += -s +endif + + +DESTDIR=`pwd`/debian/tmp + +conf_args = \ + --with-fhs \ + --enable-shared \ + --enable-static \ + --prefix=/usr \ + --sysconfdir=/etc \ + --libdir=/etc/samba \ + --with-privatedir=/etc/samba \ + --with-piddir=/var/run/samba \ + --localstatedir=/var \ + --with-netatalk \ + --with-pam \ + --with-syslog \ + --with-utmp \ + --with-readline \ + --with-pam_smbpass \ + --with-libsmbclient \ + --with-winbind \ + --with-msdfs \ + --with-automount \ + --with-tdbsam \ + --with-ldap \ + --with-python=python2.3 + +ifeq ($(DEB_HOST_GNU_SYSTEM),linux) + conf_args += \ + --with-smbmount \ + --with-acl-support \ + --with-quotas + mount_cifs = yes + smbfs = yes +else + conf_args += --without-quotas + mount_cifs = no + smbfs = no +endif + +ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE)) + conf_args += --build $(DEB_HOST_GNU_TYPE) +else + conf_args += --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE) +endif + +patch: patch-stamp +patch-stamp: + dh_testdir + if [ ! -f patch-stamp ]; then /bin/sh debian/scripts/patch-source; fi + touch patch-stamp + +unpatch: + dh_testdir + if [ -f patch-stamp ]; then /bin/sh debian/scripts/unpatch-source; fi + rm -f patch-stamp + +configure: patch-stamp configure-stamp +configure-stamp: + dh_testdir + +# if [ -f debian/config.cache ]; then \ +# cp -f debian/config.cache source/config.cache; \ +# fi + + [ -f source/Makefile ] || (cd source && CFLAGS="$(CFLAGS)" ./configure $(conf_args)) + + touch configure-stamp + +build: patch-stamp configure-stamp build-stamp +build-stamp: + dh_testdir + + $(MAKE) -C source headers + $(MAKE) -C source all nsswitch/libnss_wins.so python_ext +ifeq ($(mount_cifs),yes) + $(MAKE) -C source client/mount.cifs +endif + + touch build-stamp + +clean: unpatch + dh_testdir + dh_testroot + rm -f build-stamp configure-stamp + + # Clean first the Samba package +# -$(MAKE) -C source realclean +# -$(MAKE) -C source clean + -$(MAKE) -C source python_clean distclean + + # Delete stuff left after a build that is not deleted by 'make clean' + rm -f source/bin/wbinfo source/bin/winbindd source/bin/debug2html \ + source/bin/libsmbclient.a source/client/mount.cifs \ + source/include/stamp-h + + sed -e "s/@libacl@/`type-handling any linux-gnu`/g" \ + < debian/control.in > debian/control + + dh_clean + +install: DH_OPTIONS= +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + mkdir -p $(DESTDIR)/usr/share/man $(DESTDIR)/usr/lib/samba \ + $(DESTDIR)/lib/security $(DESTDIR)/sbin \ + $(DESTDIR)/usr/lib/cups/backend $(DESTDIR)/usr/share/samba \ + $(DESTDIR)/etc/pam.d $(DESTDIR)/etc/dhcp3/dhclient-enter-hooks.d \ + $(DESTDIR)/usr/lib/python2.3/site-packages/samba + + # Add here commands to install the package into debian/tmp. + $(MAKE) -C source install DESTDIR=$(DESTDIR) + + # libsmbclient files are not installed by the standard + # 'make install' - do it manually. + $(MAKE) -C source installclientlib DESTDIR=$(DESTDIR) + mv $(DESTDIR)/usr/lib/samba/libsmbclient.so $(DESTDIR)/usr/lib/samba/libsmbclient.so.0.1 + ln -s libsmbclient.so.0.1 $(DESTDIR)/usr/lib/samba/libsmbclient.so.0 + ln -s libsmbclient.so.0.1 $(DESTDIR)/usr/lib/samba/libsmbclient.so + + # Starting with Samba 3.0.6 libsmbclient.so is installed in + # /usr/lib/samba. We don't want it there since it is not in the + # default library path. Here we move it to /usr/lib/. + mv $(DESTDIR)/usr/lib/samba/libsmbclient* \ + $(DESTDIR)/usr/lib/ + + # Install other stuff not installed by "make install" + install -m 0755 debian/mksmbpasswd.awk $(DESTDIR)/usr/sbin/mksmbpasswd + + # Install winbind stuff not installed by 'make install' + install -m 0644 source/nsswitch/libnss_winbind.so \ + $(DESTDIR)/lib/libnss_winbind.so.2 + install -m 0644 source/nsswitch/pam_winbind.so \ + $(DESTDIR)/lib/security/ + + # Install libnss_wins.so, which is not installed by 'make install' either. + install -m 0644 source/nsswitch/libnss_wins.so \ + $(DESTDIR)/lib/libnss_wins.so.2 + + # pam_smbpass.so isn't being installed by 'make install'. + # We'll move it here to $(DESTDIR)/lib/security/ and then + # libpam-smbpass.files will make dh_movefiles move it to the + # right location in the libpam-smbpass package. + install -m 0644 source/bin/pam_smbpass.so $(DESTDIR)/lib/security/ + +ifeq ($(smbfs),yes) + # Create the symlinks that will allow us to do "mount -t smbfs ..." + # and "mount -t smb ...". Note that the source/script/installbin.sh + # tries to create the first symlink, but we have commented + # that code out and do everything here. We also create + # symlinks for the man pages. + ln -s /usr/bin/smbmount $(DESTDIR)/sbin/mount.smbfs + ln -s /usr/bin/smbmount $(DESTDIR)/sbin/mount.smb + ln -s smbmount.8 $(DESTDIR)/usr/share/man/man8/mount.smb.8 + ln -s smbmount.8 $(DESTDIR)/usr/share/man/man8/mount.smbfs.8 +endif + +ifeq ($(mount_cifs),yes) + # Install mount.cifs and its man page + install -m 04755 source/client/mount.cifs $(DESTDIR)/sbin/ + install -m 0644 docs/manpages/mount.cifs.8 $(DESTDIR)/usr/share/man/man8/ +endif + + # For CUPS to support printing to samba printers, it's necessary + # to make the following symlink (according to + # Erich Schubert <debian@vitavonni.de> in #109509): + ln -s ../../../bin/smbspool $(DESTDIR)/usr/lib/cups/backend/smb + + # Install man pages for files without man pages in the upstream sources + install -m 0644 debian/mksmbpasswd.8 $(DESTDIR)/usr/share/man/man8/mksmbpasswd.8 + + # We don't provide the "Using Samba" book in the swat package. + # It's provided in the samba-doc package so in the swat package + # we just provide a symlink to the real book. + ln -s ../../doc/samba-doc/htmldocs/using_samba \ + $(DESTDIR)/usr/share/samba/swat/using_samba + + # Delete unwanted stuff leftover from "make install" + + # The smbwrapper package is not being generated anymore, so we must + # delete the related man pages. + rm $(DESTDIR)/usr/share/man/man1/smbsh.1 + + # We're not providing findsmb (should we?) so let's remove the man + # pages. + find debian/ -name 'findsmb*' -exec rm -f {} \; + + # Install samba-common's conffiles - they'll get moved later to their + # correct place by dh_movefiles. + cp debian/smb.conf $(DESTDIR)/usr/share/samba/ + install -m755 debian/panic-action $(DESTDIR)/usr/share/samba/ + cp debian/gdbcommands $(DESTDIR)/etc/samba/ + cp debian/samba.pamd $(DESTDIR)/etc/pam.d/samba + install -m755 debian/samba-common.dhcp $(DESTDIR)/etc/dhcp3/dhclient-enter-hooks.d/samba + + # Install the Python modules + # + # Hmmm... need to figure this out. We have lib.linux-i686-2.2 + # and lib.linux-i686-2.3 directories. Using only the stuff from + # the 2.3 directory for now. peloy.- + #cp source/build/lib.*/samba/*.so $(DESTDIR)/usr/lib/python2.3/site-packages/ + cp source/build/lib.*-*-2.3/samba/*.so $(DESTDIR)/usr/lib/python2.3/site-packages/samba/ + cp source/python/samba/* $(DESTDIR)/usr/lib/python2.3/site-packages/samba/ + + dh_movefiles + +# Build architecture-independent files here. +# Pass -i to all debhelper commands in this target to reduce clutter. +binary-indep: DH_OPTIONS=-i +binary-indep: build install + dh_testdir + dh_testroot + dh_installdebconf + dh_installdocs -A debian/README.build + # dh_installexamples is not available in Debian Potato... + [ -x /usr/bin/dh_installexamples ] && DH_OPTIONS= dh_installexamples -v -psamba-doc examples/* +# dh_installmenu +# dh_installemacsen +# dh_installpam +# dh_installinit +# dh_installcron +# dh_installmanpages +# dh_installinfo +# dh_undocumented + dh_installchangelogs + dh_link + dh_compress + dh_fixperms + + # Get rid of those pesky .cvsignore files to make lintian happy + find debian/ -name .cvsignore -exec rm -f {} \; + + dh_installdeb +# dh_perl + dh_gencontrol + dh_md5sums + dh_builddeb + +# Build architecture-dependent files here. +# Pass -a to all debhelper commands in this target to reduce clutter. +ifeq ($(smbfs),no) + DH_EXTRAS=-Nsmbfs +endif + +binary-arch: DH_OPTIONS=-a $(DH_EXTRAS) +binary-arch: build install + dh_testdir + dh_testroot + dh_installdebconf + dh_installdocs -A debian/README.build + # dh_installexamples is not available in Debian Potato... + [ -x /usr/bin/dh_installexamples ] && DH_OPTIONS= dh_installexamples -v -ppython2.3-samba source/python/examples/* +# dh_installmenu + # dh_installlogrotate is not available in Debian Potato... + if [ -x /usr/bin/dh_installlogrotate ]; then \ + dh_installlogrotate; \ + else \ + mkdir -p debian/samba/etc/logrotate.d; \ + cp debian/samba.logrotate debian/samba/etc/logrotate.d/samba; \ + mkdir -p debian/winbind/etc/logrotate.d; \ + cp debian/winbind.logrotate debian/winbind/etc/logrotate.d/winbind; \ + fi +# dh_installemacsen +# dh_installpam + DH_OPTIONS= dh_installinit -psamba -- "defaults 20 19" + DH_OPTIONS= dh_installinit -pwinbind + dh_installcron +# dh_installmanpages +# dh_installinfo + cp debian/winbind.lintian debian/winbind/usr/share/lintian/overrides/winbind +# dh_undocumented + dh_installchangelogs -Nlibpam-smbpass + DH_OPTIONS= dh_installchangelogs -plibpam-smbpass source/pam_smbpass/CHANGELOG + dh_strip --dbg-package=samba --dbg-package=smbclient + cp -a debian/smbclient-dbg/* debian/samba-dbg + rm -rf debian/smbclient-dbg + dh_link + dh_compress + dh_fixperms + + # Why this is executable, I have NO idea... + chmod a-x debian/libsmbclient-dev/usr/include/libsmbclient.h + +ifeq ($(smbfs),yes) + # You may want to make some executables suid here. + # The smbmnt and smbumount binaries should be setuid-root. This + # has security implications because these programs haven't had + # a thorough security audit. smbmount _does not_ have to have + # the setuid bit set. In fact, it is a security hole. + chmod u+s debian/smbfs/usr/bin/smbmnt + chmod u+s debian/smbfs/usr/bin/smbumount +endif + + # Set some reasonable default perms for the samba logdir. + chmod 0750 debian/samba/var/log/samba/ + chown root.adm debian/samba/var/log/samba/ + + # Get rid of those pesky .cvsignore files to make lintian happy + # (maybe we only need the "find ... -exec rm -f {} ;" we have + # in the binary-indep target?) peloy.- + find debian/ -name .cvsignore -exec rm -f {} \; + + dh_installdeb +# dh_makeshlibs +# dh_perl + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install configure diff --git a/packaging/Debian/debian-sarge/samba-common.config b/packaging/Debian/debian-sarge/samba-common.config new file mode 100644 index 0000000000..766f0ddb7e --- /dev/null +++ b/packaging/Debian/debian-sarge/samba-common.config @@ -0,0 +1,154 @@ +#/bin/sh -e + +# Source debconf library. +. /usr/share/debconf/confmodule + +# Function for grabbing a parameter from an smb.conf file +smbconf_retr() { + if [ -z "$1" ]; then + return + fi + + if [ -n "$2" ]; then + local FILE="$2" + fi + + if [ -z "$FILE" ]; then + return + fi + + sed -n -e" + s/^[[:space:]]*\[global\]/\[global\]/i + /^\[global\]/,/^[[:space:]]*\[/ { + s/^[[:space:]]*$1[[:space:]]*=[[:space:]]*//pi + }" $FILE \ + | tail -n 1 +} + +FILE=/etc/samba/smb.conf + +db_title "Samba Server" + +# We ask the question IFF the config contains complex options that could +# cause us to break the config. +if [ -f "$FILE" ] && grep -v dhcp.conf $FILE \ + | grep -qEi '\\$|^[[:space:]]*include[[:space:]]*=' +then + db_input high samba-common/do_debconf || true + db_go +else + db_set samba-common/do_debconf true +fi + +# If user doesn't want to use debconf to configure Samba the leave... +db_get samba-common/do_debconf || true +if [ "${RET}" = "false" ]; then + exit 0 +fi + +# User wants to use debconf, let's continue... + +# Adjust priority of the question about the workgroup name depending +# on whether a workgroup name has already being specified. +db_get samba-common/workgroup || true +if [ "${RET}" ]; then + WGPRIORITY=medium +else + WGPRIORITY=high +fi + +# Preload any values from the existing smb.conf file +if [ -f $FILE ]; then + WORKGROUP=`smbconf_retr workgroup` + if [ "$WORKGROUP" ]; then + db_set samba-common/workgroup "$WORKGROUP" + fi + + ENCRYPT=`smbconf_retr "encrypt passwords"` + if [ "$ENCRYPT" ]; then + ENCRYPT=`echo $ENCRYPT | tr '[A-Z]' '[a-z]'` + if [ "$ENCRYPT" = "yes" ]; then + ENCRYPT=true + elif [ "$ENCRYPT" = "no" ]; then + ENCRYPT=false + fi + + db_set samba-common/encrypt_passwords "$ENCRYPT" + fi + + CHARSET=`smbconf_retr "character set"` + CODEPAGE=`smbconf_retr "client code page"` + UNIXCHARSET=`smbconf_retr "unix charset"` + DOSCHARSET=`smbconf_retr "dos charset"` + + # If we're upgrading from an old version and there's no + # 'passdb backend' setting, add one. + if [ "$1" = "configure" -a -n "$2" ] \ + && dpkg --compare-versions "$2" lt 2.99.cvs.20020713-2 \ + && ! grep -q -i '^[[:space:]]*passdb backend[[:space:]]*=' $FILE + then + TMPFILE=/etc/samba/smb.conf.dpkg-tmp + sed -e' + s/^\([[:space:]]*\)\[global\]/\1\[global\]/i + s/^\([[:space:]]*\)encrypt passwords/\1encrypt passwords/i + /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { + /^[[:space:]]*encrypt passwords[[:space:]]*=/a \ + passdb backend = smbpasswd guest + }' < $FILE > ${TMPFILE} + chmod a+r ${TMPFILE} + mv -f ${TMPFILE} /etc/samba/smb.conf + fi +fi + +# Get workgroup name +db_input $WGPRIORITY samba-common/workgroup || true +db_go + +# Use encrypted passwords? +db_input medium samba-common/encrypt_passwords || true +db_go + +# Handle migrating character sets +if [ -n "$CHARSET" -a -z "$UNIXCHARSET" ] +then + UNIXCHARSET=`echo $CHARSET | sed -e's/iso-/ISO/i'` + db_set samba-common/character_set "$UNIXCHARSET" + # FIXME: should eventually be low. + db_input medium samba-common/character_set || true + db_go +fi + +if [ -n "$CODEPAGE" -a -z "$DOSCHARSET" ] +then + DOSCHARSET=CP`echo $CODEPAGE | sed -e's/[[:alpha:]]*//g'` + db_set samba-common/codepage "$DOSCHARSET" + # FIXME: should eventually be low. + db_input medium samba-common/codepage || true + db_go +fi + +DHCPPRIORITY=medium +#if [ "$DEBCONF_RECONFIGURE" = 1 ] && [ -f /sbin/dhclient3 ] +if [ -f /sbin/dhclient3 ] +then + DHCPPRIORITY=high +# TODO: see if we can detect that dhcp3-client is *going* to be installed, +# even if it isn't yet. +#elif dpkg-query -W --showformat='${Status}\n' dhcp3-client | grep ??? +# unknown ok not-installed ? +# DHCPPRIORITY=high +fi + +if [ ! -f $FILE ] || grep -q -i 'wins server' $FILE +then + # check the values before and after; unset the 'applied' flag + # if they don't match. + db_get samba-common/dhcp || true + OLDDHCP="$RET" + db_input $DHCPPRIORITY samba-common/dhcp || true + db_go + db_get samba-common/dhcp || true + if [ "$OLDDHCP" != "$RET" ]; then + db_fset samba-common/dhcp applied false + fi +fi diff --git a/packaging/Debian/debian-sarge/samba-common.dhcp b/packaging/Debian/debian-sarge/samba-common.dhcp new file mode 100644 index 0000000000..3b5a05ff57 --- /dev/null +++ b/packaging/Debian/debian-sarge/samba-common.dhcp @@ -0,0 +1,57 @@ +#!/bin/sh + +SAMBA_DHCP_CONF=/etc/samba/dhcp.conf + +netbios_setup() { + # No need to continue if we're called with an unsupported option + + if [ "$reason" != BOUND ] && [ "$reason" != RENEW ] \ + && [ "$reason" != REBIND ] && [ "$reason" != REBOOT ] \ + && [ "$reason" != EXPIRE ] && [ "$reason" != FAIL ] + then + return + fi + + # Nor should we continue if no settings have changed + if [ "$new_netbios_name_servers" = "$old_netbios_name_servers" ] \ + && [ "$new_netbios_scope" = "$old_netbios_scope" ] + then + return + fi + + # reparse our own file + local other_servers=`sed -n -e"s/[[:space:]]$interface:[^[:space:]]*//g; \ + s/^[[:space:]]*wins server[[:space:]]*=[[:space:]]*//pi" \ + $SAMBA_DHCP_CONF` + + umask 022 + + local serverlist="$other_servers" + for server in $new_netbios_name_servers + do + serverlist="$serverlist $interface:$server" + done + + echo -n > $SAMBA_DHCP_CONF + + # If we're updating on failure/expire, AND there are no WINS + # servers for other interfaces, leave the file empty. + if [ -z "$other_servers" ] + then + if [ "$reason" = FAIL ] || [ "$reason" = EXPIRE ] + then + return + fi + fi + + if [ -n "$serverlist" ] + then + echo " wins server =$serverlist" >> $SAMBA_DHCP_CONF + fi + if [ -n "$new_netbios_scope" ] + then + echo " netbios scope = $new_netbios_scope" >> $SAMBA_DHCP_CONF + fi +} + +netbios_setup diff --git a/packaging/Debian/debian-stable/samba-common.dirs b/packaging/Debian/debian-sarge/samba-common.dirs index c089ad7357..c089ad7357 100644 --- a/packaging/Debian/debian-stable/samba-common.dirs +++ b/packaging/Debian/debian-sarge/samba-common.dirs diff --git a/packaging/Debian/debian-sarge/samba-common.files b/packaging/Debian/debian-sarge/samba-common.files new file mode 100644 index 0000000000..f5779fa827 --- /dev/null +++ b/packaging/Debian/debian-sarge/samba-common.files @@ -0,0 +1,19 @@ +etc/samba/ +etc/dhcp3/ +etc/pam.d/ +usr/bin/net +usr/bin/nmblookup +usr/bin/smbpasswd +usr/bin/testparm +usr/share/man/man1/nmblookup.1 +usr/share/man/man1/testparm.1 +usr/share/man/man5/lmhosts.5 +usr/share/man/man5/smb.conf.5 +usr/share/man/man7/samba.7 +usr/share/man/man8/net.8 +usr/share/man/man8/smbpasswd.8 +usr/share/samba/lowcase.dat +usr/share/samba/panic-action +usr/share/samba/smb.conf +usr/share/samba/upcase.dat +usr/share/samba/valid.dat diff --git a/packaging/Debian/debian-stable/samba-common.postinst b/packaging/Debian/debian-sarge/samba-common.postinst index 6c6eb9bf53..6c6eb9bf53 100644 --- a/packaging/Debian/debian-stable/samba-common.postinst +++ b/packaging/Debian/debian-sarge/samba-common.postinst diff --git a/packaging/Debian/debian-stable/samba-common.postrm b/packaging/Debian/debian-sarge/samba-common.postrm index 8a4b6d3d55..8a4b6d3d55 100644 --- a/packaging/Debian/debian-stable/samba-common.postrm +++ b/packaging/Debian/debian-sarge/samba-common.postrm diff --git a/packaging/Debian/debian-sarge/samba-common.templates b/packaging/Debian/debian-sarge/samba-common.templates new file mode 100644 index 0000000000..e5f7b1ae0c --- /dev/null +++ b/packaging/Debian/debian-sarge/samba-common.templates @@ -0,0 +1,66 @@ +Template: samba-common/character_set +Type: string +_Description: Character Set for Unix filesystem + You currently have a "character set" configured in your smb.conf. In + Samba 3.0, this option is replaced by a new option, "unix charset". + Please specify the character set you wish to use for theis new option, + which controls how Samba interprets filenames on the file system. + . + If you leave this option blank, your smb.conf will not be changed. + +Template: samba-common/codepage +Type: string +_Description: Character Set for DOS clients + You currently have a "client code page" set in your smb.conf. In Samba + 3.0, this option is replaced by the option "dos charset". Please specify + the character set you wish to use for this new option. In most cases, the + default chosen for you will be sufficient. Note that this option is not + needed to support Windows clients, it is only for DOS clients. If you + leave this option blank, your smb.conf will not be changed. + +Template: samba-common/dhcp +Type: boolean +Default: false +_Description: Modify smb.conf to use WINS settings from DHCP? + If your computer gets IP address information from a DHCP server on the + network, the DHCP server may also provide information about WINS servers + ("NetBIOS name servers") present on the network. This requires a + change to your smb.conf file so that DHCP-provided WINS settings will + automatically be read from /etc/samba/dhcp.conf. + . + You must have the dhcp3-client package installed to take advantage of this + feature. + +Template: samba-common/do_debconf +Type: boolean +Default: true +_Description: Configure smb.conf through debconf? + The rest of the configuration of Samba deals with questions that affect + parameters in /etc/samba/smb.conf, which is the file used to configure the + Samba programs (nmbd and smbd.) Your current smb.conf contains an + 'include' line or an option that spans multiple lines, which could confuse + debconf and require you to edit your smb.conf by hand to get it working + again. + . + If you don't use debconf to configure smb.conf, you will have to handle + any configuration changes yourself, and will not be able to take + advantage of periodic configuration enhancements. Therefore, use of + debconf is recommended if possible. + +Template: samba-common/workgroup +Type: string +_Description: Workgroup/Domain Name? + This controls what workgroup your server will appear to be in when queried + by clients. Note that this parameter also controls the Domain name used + with the security=domain setting. + +Template: samba-common/encrypt_passwords +Type: boolean +Default: true +_Description: Use password encryption? + Recent Windows clients communicate with SMB servers using encrypted + passwords. If you want to use clear text passwords you will need to change + a parameter in your Windows registry. It is recommended that you use + encrypted passwords. If you do, make sure you have a valid + /etc/samba/smbpasswd file and that you set passwords in there for each + user using the smbpasswd command. diff --git a/packaging/Debian/debian-sarge/samba-doc.docs b/packaging/Debian/debian-sarge/samba-doc.docs new file mode 100644 index 0000000000..d9f0aa1d0a --- /dev/null +++ b/packaging/Debian/debian-sarge/samba-doc.docs @@ -0,0 +1,8 @@ +docs/Samba3-HOWTO.pdf +docs/Samba3-ByExample.pdf +docs/Samba3-Developers-Guide.pdf +docs/REVISION +docs/THANKS +docs/history +docs/htmldocs/ +docs/registry/ diff --git a/packaging/Debian/debian-stable/samba-doc.examples b/packaging/Debian/debian-sarge/samba-doc.examples index e71180364c..e71180364c 100644 --- a/packaging/Debian/debian-stable/samba-doc.examples +++ b/packaging/Debian/debian-sarge/samba-doc.examples diff --git a/packaging/Debian/debian-sarge/samba.config b/packaging/Debian/debian-sarge/samba.config new file mode 100644 index 0000000000..300b19a2e8 --- /dev/null +++ b/packaging/Debian/debian-sarge/samba.config @@ -0,0 +1,92 @@ +#/bin/sh -e +# +# + +# Source debconf library. +. /usr/share/debconf/confmodule + +# Function for grabbing a parameter from an smb.conf file +smbconf_retr() { + if [ -z "$1" ]; then + return + fi + + if [ -n "$2" ]; then + local FILE="$2" + fi + + if [ -z "$FILE" ]; then + return + fi + + sed -n -e" + s/^[[:space:]]*\[global\]/\[global\]/i + /^\[global\]/,/^[[:space:]]*\[/ { + s/^[[:space:]]*$1[[:space:]]*=[[:space:]]*//pi + }" $FILE \ + | tail -n 1 +} + +FILE=/etc/samba/smb.conf + +db_title "Samba Server" + +# Babysit users who don't read README.Debian +if [ -n "$2" ] && dpkg --compare-versions "$2" lt "2.2" +then + db_input medium samba/log_files_moved || true + db_go +fi + +db_input medium samba/run_mode || true +db_go + + +# Offer to move the password database for existing users +if [ "$1" = "configure" -a -n "$2" -a -e /etc/samba/smbpasswd \ + -a ! -e /var/lib/samba/passdb.tdb ] \ + && dpkg --compare-versions "$2" lt 2.99.cvs.20020713-2 +then + FILE=/etc/samba/smb.conf + PASSDB="" + if [ -f "$FILE" ]; then + PASSDB=`smbconf_retr "passdb backend"` + fi + TDBPRIORITY=medium + if echo "$PASSDB" | grep -q ldapsam; then + TDBPRIORITY=low + fi + db_get samba-common/do_debconf || true + if [ "${RET}" = "false" ]; then + TDBPRIORITY=low + fi + + db_input "$TDBPRIORITY" samba/tdbsam || true +fi + +# We vary the priority of the next question depending on whether +# the password database already exists... +if [ -e /etc/samba/smbpasswd -o -e /var/lib/samba/passdb.tdb ]; then + PRIORITY="low" +else + # If 'encrypt passwords' is true in smb.conf, and smbpasswd + # does not exist, default to yes here. + FILE=/etc/samba/smb.conf + if [ -f "$FILE" ]; then + ENCRYPT=`smbconf_retr "encrypt passwords"` + if [ "$ENCRYPT" ]; then + ENCRYPT=`echo $ENCRYPT | tr '[A-Z]' '[a-z]'` + if [ "$ENCRYPT" = "yes" ]; then + ENCRYPT=true + fi + if [ "$ENCRYPT" = "no" ]; then + ENCRYPT=false + fi + fi + db_set samba/generate_smbpasswd "$ENCRYPT" + fi + PRIORITY="medium" +fi + +db_input $PRIORITY samba/generate_smbpasswd || true +db_go diff --git a/packaging/Debian/debian-stable/samba.cron.daily b/packaging/Debian/debian-sarge/samba.cron.daily index 42fc98d8f6..42fc98d8f6 100644 --- a/packaging/Debian/debian-stable/samba.cron.daily +++ b/packaging/Debian/debian-sarge/samba.cron.daily diff --git a/packaging/Debian/debian-sarge/samba.dirs b/packaging/Debian/debian-sarge/samba.dirs new file mode 100644 index 0000000000..a58e4e9892 --- /dev/null +++ b/packaging/Debian/debian-sarge/samba.dirs @@ -0,0 +1,7 @@ +usr/bin +usr/sbin +var/log/samba +var/lib/samba/printers/W32X86 +var/lib/samba/printers/WIN40 +var/run/samba +var/cache/samba diff --git a/packaging/Debian/debian-sarge/samba.docs b/packaging/Debian/debian-sarge/samba.docs new file mode 100644 index 0000000000..7949c615b0 --- /dev/null +++ b/packaging/Debian/debian-sarge/samba.docs @@ -0,0 +1,4 @@ +README +Roadmap +WHATSNEW.txt +docs/htmldocs/Samba3-HOWTO/diagnosis.html diff --git a/packaging/Debian/debian-sarge/samba.files b/packaging/Debian/debian-sarge/samba.files new file mode 100644 index 0000000000..163a25b173 --- /dev/null +++ b/packaging/Debian/debian-sarge/samba.files @@ -0,0 +1,17 @@ +usr/bin/smbstatus +usr/bin/smbcontrol +usr/bin/tdbbackup +usr/bin/pdbedit +usr/sbin/smbd +usr/sbin/nmbd +usr/sbin/mksmbpasswd +usr/lib/samba/vfs +usr/share/man/man1/smbcontrol.1 +usr/share/man/man1/smbstatus.1 +usr/share/man/man5/smbpasswd.5 +usr/share/man/man8/nmbd.8 +usr/share/man/man8/pdbedit.8 +usr/share/man/man8/smbd.8 +usr/share/man/man8/mksmbpasswd.8 +usr/share/man/man8/tdbbackup.8 + diff --git a/packaging/Debian/debian-stable/samba.init b/packaging/Debian/debian-sarge/samba.init index 5d0f4671a0..5d0f4671a0 100644 --- a/packaging/Debian/debian-stable/samba.init +++ b/packaging/Debian/debian-sarge/samba.init diff --git a/packaging/Debian/debian-sarge/samba.logrotate b/packaging/Debian/debian-sarge/samba.logrotate new file mode 100644 index 0000000000..57f4228a7c --- /dev/null +++ b/packaging/Debian/debian-sarge/samba.logrotate @@ -0,0 +1,21 @@ +/var/log/samba/log.smbd { + weekly + missingok + rotate 7 + postrotate + invoke-rc.d --quiet samba reload > /dev/null + endscript + compress + notifempty +} + +/var/log/samba/log.nmbd { + weekly + missingok + rotate 7 + postrotate + [ ! -f /var/run/samba/nmbd.pid ] || kill -HUP `cat /var/run/samba/nmbd.pid` + endscript + compress + notifempty +} diff --git a/packaging/Debian/debian-sarge/samba.pamd b/packaging/Debian/debian-sarge/samba.pamd new file mode 100644 index 0000000000..e2c7a99356 --- /dev/null +++ b/packaging/Debian/debian-sarge/samba.pamd @@ -0,0 +1,3 @@ +@include common-auth +@include common-account +@include common-session diff --git a/packaging/Debian/debian-sarge/samba.postinst b/packaging/Debian/debian-sarge/samba.postinst new file mode 100644 index 0000000000..0fb03f8768 --- /dev/null +++ b/packaging/Debian/debian-sarge/samba.postinst @@ -0,0 +1,230 @@ +#!/bin/sh -e +# +# Post-installation script for the Samba package for Debian GNU/Linux +# +# + +case "$1" in + configure) + # continue below + ;; + + abort-upgrade|abort-remove|abort-deconfigure) + exit 0 + ;; + + *) + echo "postinst called with unknown argument \`$1'" >&2 + exit 0 + ;; +esac + +# Handle debconf +. /usr/share/debconf/confmodule + +INITCONFFILE=/etc/default/samba + +# We generate several files during the postinst, and we don't want +# them to be readable only by root. +umask 022 + + +# Generate configuration file if it does not exist, using default values. +[ -r "${INITCONFFILE}" ] || { + echo Generating ${INITCONFFILE}... >&2 + cat >${INITCONFFILE} <<'EOFMAGICNUMBER1234' +# Defaults for samba initscript +# sourced by /etc/init.d/samba +# installed at /etc/default/samba by the maintainer scripts +# + +# +# This is a POSIX shell fragment +# + +# How should Samba (smbd) run? Possible values are "daemons" +# or "inetd". +RUN_MODE="" +EOFMAGICNUMBER1234 +} + +# --- Begin of FHS migration code --- + +# Starting with Samba 2.2.3-4 the WINS database, the browse +# database and other important run-time files are stored in +# FHS-compliant directories. The following code takes care of +# moving the files in the old directories (/var/samba/ and +# /var/state/samba) to the new FHS-compliant directories. + +if [ -d /var/samba/ ] && [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.0.7-4 +then + mv /var/samba/* /var/lib/samba/ 2>/dev/null || true + rmdir /var/samba/ +fi + +# Default for anything we don't know about (see next two 'for' loops) +# is /var/lib/samba -- guaranteed not to accidentally tromp on any +# files the admin thought were safe. +if [ -d /var/state/samba ] && [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.2.3-4 +then + mv /var/state/samba/* /var/lib/samba/ 2>/dev/null || true + rmdir /var/state/samba/ + + # It's not FHS, and it's probably our fault this is here, + # so delete it if we can. + rmdir /var/state/ 2> /dev/null || true +fi + +# All these files are now placed in their respective FHS-compliant +# directories. Separate out the individual files accordingly. +for F in browse.dat printing.tdb winbindd_cache.tdb +do + if [ -e /var/lib/samba/"$F" ]; then + mv /var/lib/samba/"$F" /var/cache/samba/ + fi +done + +for F in brlock.tdb connections.tdb locking.tdb messages.tdb nmbd.pid \ + sessionid.tdb smbd.pid unexpected.tdb +do + if [ -e /var/lib/samba/"$F" ]; then + mv /var/lib/samba/"$F" /var/run/samba/ + fi +done + +# Beginning with Samba 2.2.5-1, we also move the domain secrets file +# to a more suitable location, since no one really edits this by hand. +if [ -e /etc/samba/secrets.tdb -a ! -e /var/lib/samba/secrets.tdb ] +then + mv /etc/samba/secrets.tdb /var/lib/samba/ +fi + +# If upgrading from a previous 2.999 snapshot, move the passdb.tdb +# database into /var/lib. + +if [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.999+3.0.alpha23-5 \ + && [ -e /etc/samba/passdb.tdb -a ! -e /var/lib/samba/passdb.tdb ] +then + mv /etc/samba/passdb.tdb /var/lib/samba/ +fi + +# --- End of FHS migration code --- + +# If upgrading from a previous 2.999 snapshot, clear the broken +# registry.tdb file. +if [ -n "$2" ] && dpkg --compare-versions "$2" gt 2.99.cvs.20020713-1 \ + && dpkg --compare-versions "$2" lt 2.999+3.0cvs20020805-1 +then + rm -f /var/lib/samba/registry.tdb +fi + +# ------------------------- Debconf questions start --------------------- + +# Run Samba as daemons or from inetd? +db_get samba/run_mode || true +RUN_MODE="${RET}" + +TMPFILE=/etc/default/samba.dpkg-tmp +sed -e "s/^[[:space:]]*RUN_MODE[[:space:]]*=.*/RUN_MODE=\"${RUN_MODE}\"/" \ + < ${INITCONFFILE} >${TMPFILE} +chmod a+r ${TMPFILE} +mv -f ${TMPFILE} ${INITCONFFILE} + +# Generate a smbpasswd file? +db_get samba/generate_smbpasswd || true +GENERATE_SMBPASSWD="${RET}" + +db_get samba/tdbsam || true +PDB_MIGRATE="${RET}" + +# Done with debconf now. +db_stop + +umask 066 + +# FIXME: disable if ldapsam support is enabled? +# FIXME: we don't want to pass these through the smbpasswd backend, +# some of the faking can cause us problems! +if [ "${GENERATE_SMBPASSWD}" = "true" -a ! -e /var/lib/samba/passdb.tdb -a ! -e /etc/samba/smbpasswd ]; then + getent passwd | /usr/sbin/mksmbpasswd > /etc/samba/smbpasswd + pdbedit -i smbpasswd -e tdbsam + rm /etc/samba/smbpasswd +fi + +umask 022 + +if [ -n "$2" -a -e /etc/samba/smbpasswd \ + -a ! -e /var/lib/samba/passdb.tdb -a "$PDB_MIGRATE" = "true" ] \ + && dpkg --compare-versions "$2" lt 2.99.cvs.20020713-2 +then + umask 066 + pdbedit -i smbpasswd -e tdbsam + rm /etc/samba/smbpasswd + umask 022 + + # The database has been moved, now make sure we can still find it. + PASSDB=`sed -n -e"s/^[[:space:]]*\[global\]/\[global\]/i + /^\[global\]/,/^[[:space:]]*\[/ \ + s/^[[:space:]]*passdb backend[[:space:]]*=[[:space:]]*//pi" \ + < /etc/samba/smb.conf \ + | tail -n 1` + if echo "$PASSDB" | egrep -q "(^|[[:space:]])smbpasswd"; then + if ! echo "$PASSDB" | egrep -q "(^|[[:space:]])tdbsam"; then + PASSDB=`echo $PASSDB | sed -e's/\(^\|[[:space:]]\)smbpasswd/\1tdbsam/'` + fi + fi + if ! echo "$PASSDB" | egrep -q "(^|[[:space:]])tdbsam"; then + PASSDB="tdbsam $PASSDB" + fi + TMPFILE=/etc/samba/smb.conf.dpkg-tmp + sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i + /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ \ + s/^\([[:space:]]*\)passdb backend[[:space:]]*=.*/\1passdb backend = ${PASSDB}/i" \ + < /etc/samba/smb.conf >${TMPFILE} + chmod a+r ${TMPFILE} + mv -f ${TMPFILE} /etc/samba/smb.conf +fi + +# ------------------------- Debconf questions end --------------------- + +# Handle removal of nmbd from inetd.conf, which is no longer a supported +# configuration. +if dpkg --compare-versions "$2" lt 2.999+3.0.alpha20-4; then + update-inetd --remove netbios-ns +fi + +# We want to add these entries to inetd.conf commented out. Otherwise +# UDP traffic could make inetd to start nmbd or smbd right during +# the configuration stage. +if [ -z "$2" ]; then + update-inetd --add "#<off># netbios-ssn stream tcp nowait root /usr/sbin/tcpd /usr/sbin/smbd" +fi + +if [ "$RUN_MODE" = "daemons" ]; then + update-inetd --disable netbios-ssn +else + update-inetd --enable netbios-ssn +fi + +# This check is a safety net: the /etc/samba/smbpasswd file must have +# permissions 600. +if [ -f /etc/samba/smbpasswd ]; then + chmod 600 /etc/samba/smbpasswd +fi + +# Do the same check for /var/backup/smbpasswd.bak, just in case. +if [ -f /var/backups/smbpasswd.bak ]; then + chmod 600 /var/backups/smbpasswd.bak +fi + +# Delete old /etc/samba/debian_config file, which is not used anymore +# now that we are using debconf. +rm -f /etc/samba/debian_config + +# Move old log files to the new location of Samba's log files +mv -f /var/log/nmb* /var/log/samba/ 2> /dev/null || true +mv -f /var/log/smb* /var/log/samba/ 2> /dev/null || true + +#DEBHELPER# + +exit 0 diff --git a/packaging/Debian/debian-stable/samba.postrm b/packaging/Debian/debian-sarge/samba.postrm index b79fe1d009..b79fe1d009 100644 --- a/packaging/Debian/debian-stable/samba.postrm +++ b/packaging/Debian/debian-sarge/samba.postrm diff --git a/packaging/Debian/debian-stable/samba.prerm b/packaging/Debian/debian-sarge/samba.prerm index ab62c706d8..ab62c706d8 100644 --- a/packaging/Debian/debian-stable/samba.prerm +++ b/packaging/Debian/debian-sarge/samba.prerm diff --git a/packaging/Debian/debian-sarge/samba.templates b/packaging/Debian/debian-sarge/samba.templates new file mode 100644 index 0000000000..ce503aea5c --- /dev/null +++ b/packaging/Debian/debian-sarge/samba.templates @@ -0,0 +1,50 @@ +Template: samba/generate_smbpasswd +Type: boolean +Default: false +_Description: Create samba password database, /var/lib/samba/passdb.tdb? + To be compatible with the defaults in most versions of Windows, Samba must + be configured to use encrypted passwords. This requires user passwords to + be stored in a file separate from /etc/passwd. This file can be created + automatically, but the passwords must be added manually (by you or the + user) by running smbpasswd, and you must arrange to keep it up-to-date in + the future. If you do not create it, you will have to reconfigure samba + (and probably your client machines) to use plaintext passwords. See + /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc + package for more details. + +Template: samba/log_files_moved +Type: note +_Description: Samba's log files have moved. + Starting with the first packages of Samba 2.2 for Debian the log files for + both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The + names of the files are log.nmbd and log.smbd, for nmbd and smbd + respectively. + . + The old log files that were in /var/log/ will be moved to the new location + for you. + +Template: samba/nmbd_from_inetd +Type: note +_Description: Running nmbd from inetd is no longer supported + Your system was previously configured to start nmbd and smbd from inetd. + As of version 2.999+3.0.alpha20-4, nmbd will no longer be started from + inetd. If you have modified your /etc/init.d/samba startup script, you + may need to adjust it by hand now so that nmbd will start. + +Template: samba/run_mode +Type: select +_Choices: daemons, inetd +Default: daemons +_Description: How do you want to run Samba? + The Samba daemon smbd can run as a normal daemon or from inetd. Running as + a daemon is the recommended approach. + +Template: samba/tdbsam +Type: boolean +Default: false +_Description: Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb? + Samba 3.0 introduces a newer, more complete SAM database interface which + supersedes the /etc/samba/smbpasswd file. Would you like your existing + smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you + plan to use another pdb backend (e.g., LDAP) instead, you should answer + 'no' here. diff --git a/packaging/Debian/debian-stable/scripts/patch-source b/packaging/Debian/debian-sarge/scripts/patch-source index a8559b4167..a8559b4167 100755..100644 --- a/packaging/Debian/debian-stable/scripts/patch-source +++ b/packaging/Debian/debian-sarge/scripts/patch-source diff --git a/packaging/Debian/debian-sarge/scripts/unpatch-source b/packaging/Debian/debian-sarge/scripts/unpatch-source new file mode 100644 index 0000000000..3ded1150ba --- /dev/null +++ b/packaging/Debian/debian-sarge/scripts/unpatch-source @@ -0,0 +1,20 @@ +#!/bin/sh -e +# +# + +# We want to reverse the patches in the opposite order we applied +# them, hence the 'ls|sort -r'. +for patch in `ls debian/patches/*.patch | sort -r`; do + patch -p1 -R --ignore-whitespace < $patch +done + +# Unused code. See comment in the patch-source script. + +#TMPFILE=source/VERSION.debian +#sed -e "s/^\(SAMBA_VERSION_VENDOR_SUFFIX=\).*$/\1/" source/VERSION > ${TMPFILE} +#mv -f ${TMPFILE} source/VERSION + +# Regenerate configure only if it is older than configure.in +[ source/configure -ot source/configure.in ] && (cd source && sh ./autogen.sh) + +exit 0 diff --git a/packaging/Debian/debian-stable/smb.conf b/packaging/Debian/debian-sarge/smb.conf index 8a75979945..8a75979945 100644 --- a/packaging/Debian/debian-stable/smb.conf +++ b/packaging/Debian/debian-sarge/smb.conf diff --git a/packaging/Debian/debian-stable/smbclient.files b/packaging/Debian/debian-sarge/smbclient.files index 96e8945bf3..96e8945bf3 100644 --- a/packaging/Debian/debian-stable/smbclient.files +++ b/packaging/Debian/debian-sarge/smbclient.files diff --git a/packaging/Debian/debian-sarge/smbfs.files b/packaging/Debian/debian-sarge/smbfs.files new file mode 100644 index 0000000000..359754ebf9 --- /dev/null +++ b/packaging/Debian/debian-sarge/smbfs.files @@ -0,0 +1,12 @@ +sbin/mount.smbfs +sbin/mount.smb +sbin/mount.cifs +usr/bin/smbmount +usr/bin/smbumount +usr/bin/smbmnt +usr/share/man/man8/smbmount.8 +usr/share/man/man8/smbumount.8 +usr/share/man/man8/smbmnt.8 +usr/share/man/man8/mount.smb.8 +usr/share/man/man8/mount.smbfs.8 +usr/share/man/man8/mount.cifs.8 diff --git a/packaging/Debian/debian-stable/smbwrapper.dirs b/packaging/Debian/debian-sarge/smbwrapper.dirs index fd727bddf0..fd727bddf0 100644 --- a/packaging/Debian/debian-stable/smbwrapper.dirs +++ b/packaging/Debian/debian-sarge/smbwrapper.dirs diff --git a/packaging/Debian/debian-stable/smbwrapper.docs b/packaging/Debian/debian-sarge/smbwrapper.docs index 2924e78734..2924e78734 100644 --- a/packaging/Debian/debian-stable/smbwrapper.docs +++ b/packaging/Debian/debian-sarge/smbwrapper.docs diff --git a/packaging/Debian/debian-stable/smbwrapper.files b/packaging/Debian/debian-sarge/smbwrapper.files index 08edbead6e..08edbead6e 100644 --- a/packaging/Debian/debian-stable/smbwrapper.files +++ b/packaging/Debian/debian-sarge/smbwrapper.files diff --git a/packaging/Debian/debian-stable/swat.config b/packaging/Debian/debian-sarge/swat.config index e210fae55e..e210fae55e 100644 --- a/packaging/Debian/debian-stable/swat.config +++ b/packaging/Debian/debian-sarge/swat.config diff --git a/packaging/Debian/debian-stable/swat.dirs b/packaging/Debian/debian-sarge/swat.dirs index d5df7df4b8..d5df7df4b8 100644 --- a/packaging/Debian/debian-stable/swat.dirs +++ b/packaging/Debian/debian-sarge/swat.dirs diff --git a/packaging/Debian/debian-stable/swat.files b/packaging/Debian/debian-sarge/swat.files index 82fdf104d3..82fdf104d3 100644 --- a/packaging/Debian/debian-stable/swat.files +++ b/packaging/Debian/debian-sarge/swat.files diff --git a/packaging/Debian/debian-stable/swat.postinst b/packaging/Debian/debian-sarge/swat.postinst index 338f8a07c2..338f8a07c2 100644 --- a/packaging/Debian/debian-stable/swat.postinst +++ b/packaging/Debian/debian-sarge/swat.postinst diff --git a/packaging/Debian/debian-stable/swat.postrm b/packaging/Debian/debian-sarge/swat.postrm index 6bc5873096..6bc5873096 100644 --- a/packaging/Debian/debian-stable/swat.postrm +++ b/packaging/Debian/debian-sarge/swat.postrm diff --git a/packaging/Debian/debian-sarge/swat.templates b/packaging/Debian/debian-sarge/swat.templates new file mode 100644 index 0000000000..3407f7efbc --- /dev/null +++ b/packaging/Debian/debian-sarge/swat.templates @@ -0,0 +1,6 @@ +Template: swat/smb_conf_warn +Type: note +_Description: Your smb.conf will be re-written! + SWAT will rewrite your smb.conf file. It will rearrange the entries and + delete all comments, include= and copy= options. If you have a carefully + crafted smb.conf then back it up or don't use SWAT! diff --git a/packaging/Debian/debian-stable/winbind.dirs b/packaging/Debian/debian-sarge/winbind.dirs index 1da8fba83a..1da8fba83a 100644 --- a/packaging/Debian/debian-stable/winbind.dirs +++ b/packaging/Debian/debian-sarge/winbind.dirs diff --git a/packaging/Debian/debian-stable/winbind.files b/packaging/Debian/debian-sarge/winbind.files index fbb76774d4..fbb76774d4 100644 --- a/packaging/Debian/debian-stable/winbind.files +++ b/packaging/Debian/debian-sarge/winbind.files diff --git a/packaging/Debian/debian-stable/winbind.init b/packaging/Debian/debian-sarge/winbind.init index 2dfdf3b835..2dfdf3b835 100644 --- a/packaging/Debian/debian-stable/winbind.init +++ b/packaging/Debian/debian-sarge/winbind.init diff --git a/packaging/Debian/debian-stable/winbind.lintian b/packaging/Debian/debian-sarge/winbind.lintian index fca17d3cca..fca17d3cca 100644 --- a/packaging/Debian/debian-stable/winbind.lintian +++ b/packaging/Debian/debian-sarge/winbind.lintian diff --git a/packaging/Debian/debian-stable/winbind.logrotate b/packaging/Debian/debian-sarge/winbind.logrotate index e36cd1281c..e36cd1281c 100644 --- a/packaging/Debian/debian-stable/winbind.logrotate +++ b/packaging/Debian/debian-sarge/winbind.logrotate diff --git a/packaging/Debian/debian-stable/wins2dns.awk b/packaging/Debian/debian-sarge/wins2dns.awk index 176868a115..176868a115 100644 --- a/packaging/Debian/debian-stable/wins2dns.awk +++ b/packaging/Debian/debian-sarge/wins2dns.awk diff --git a/packaging/Debian/debian-stable/samba-doc.docs b/packaging/Debian/debian-stable/samba-doc.docs deleted file mode 100644 index 28be037320..0000000000 --- a/packaging/Debian/debian-stable/samba-doc.docs +++ /dev/null @@ -1,6 +0,0 @@ -README -docs/Samba-HOWTO-Collection.pdf -docs/THANKS -docs/history -docs/htmldocs/ -docs/registry/ diff --git a/packaging/Debian/debian-woody/README.build b/packaging/Debian/debian-woody/README.build new file mode 100644 index 0000000000..0a11a1f6ea --- /dev/null +++ b/packaging/Debian/debian-woody/README.build @@ -0,0 +1,397 @@ +From: Steve Langasek <vorlon@netexpress.net> +To: "Eloy A. Paris" <eloy.paris@usa.net> +Date: Thu, 23 Aug 2001 21:20:05 -0500 (CDT) +Subject: Re: autobuilder failure on arm for samba-2.2.1a-3 +In-Reply-To: <20010823100906.A1092@antenas> +Message-ID: <Pine.LNX.4.30.0108231744090.11071-100000@tennyson.netexpress.net> +MIME-Version: 1.0 +Content-Type: TEXT/PLAIN; charset=US-ASCII + +On Thu, 23 Aug 2001, Eloy A. Paris wrote: + +> On Wed, Aug 22, 2001 at 03:01:01PM -0500, Steve Langasek wrote: + +> > Hmm. Maybe the thing to do is to focus on getting config.cache (not log, +> > cache) support into the package. Issues like this are frequent enough with +> > Samba, and the configure tests add enough time to the build process, that I +> > think there'd be much benefit in being able to step past a lot of these. + +> Uhhmmm... I don't know, I guess I don't like much the idea of +> maintaining a config.cache. It looks like extra work plus a +> compilation process that is "synthetic" or atificial. What happens if +> the Samba Team adds a new test, or modifies the configure script, will +> the config.cache pick those up? + +> In any case, you are the expert, so if you think that's the way to go, +> and the burden far exceeds the problems we have right now I say let's +> go for it. I am not well versed on autoconf and the configure process, +> that's all... + +Well, I'll attach my work to the bottom of this message and let you judge it +for yourself. + +The config.cache I'm trying to generate here is not equivalent to what +a configure script outputs. The only values I'm including are those which 1) +are no-brainers on any glibc-based platform, 2) are questions we need to force +a particular value for regardless of the kernel being built against, or 3) are +questions about specific bizarre features of proprietary Unices that we'll +always get an answer of 'no' to. + +I've removed all of the config.cache variables related to headers, or to +checks for particular libraries; I think it's pretty safe to assert that glibc +provides basic C functions like select(), setenv(), and waitpid() on all our +build targets, but I think it's less safe to assert that they'll always be +provided by particular header files. + +So the config.cache won't automatically be updated with answers to new +configure tests, but it also doesn't need to in order to be useful. There's +really only a handful of variables in there that we /need/ in order to +guarantee correctly-built packages, and if you want to leave out everything +else, that's perfectly ok too. Everything from the fifth stanza on down is +just a build-time speed-up for some of the slower architectures. Well, it +also has the fringe benefit that the packages will FAIL to build if someone +tries rebuilding for a really bizarre (non-Linux, non-glibc) architecture. I +see that as a plus :), you may disagree, but in any case my next trick would +be to add a global variable developers can set to bypass the provided +config.cache. + + +It is a little artificial, but the whole point of .debs is to be able to build +binaries in a controlled environment. Right now, we don't really have control +over what happens in the autobuilders. We have even /less/ control over what +happens in a stable release: it's been two weeks now since I built binaries +for bug #94380, and they haven't been uploaded to security.d.o yet. I'm +guessing they won't be uploaded until Wichert is back from vacation, either -- +which is fine, but it would be nice if we didn't have to worry about +mis-builds by the security team, or about putting the security team to extra +trouble after the fact to get packages fixed. + +With a pre-loaded config.cache, we can ensure that bugs of this kind don't +happen in woody. We can take the arm autobuilder problem into our own hands, +and not have to worry about quirkiness in the build environment. We can even +close bug #109773, since we no longer have to worry about detecting the +setuid() routines. + + +So to me, it definitely seems worth it. But you're the maintainer, and I +won't ask you to put anything in the package that you're not comfortable with. + + +> By the way, I think I remember someone was able to build 2.2.x succesfully on +> the ARM. If this is the case, could it be that there's something weird +> with Phillip's setup? + +It could be. There are arm packages for 2.2.1a-1, so at /some/ point the +autobuilder was able to pass the locking test. + + +> P.S. How did you know about the ARM build problems? I don't see any +> bugs about this... + +<http://ftp-master.debian.org/testing/>, follow the links for samba... The +exact reference for the arm autobuilder is at +<http://buildd.armlinux.org/~buildd/build.php?pkg=samba&ver=2.2.1a-4&arch=arm>. + +Regards, +Steve Langasek +postmodern programmer + + +diff -uNrw samba-2.2.1a-bak/debian/changelog samba-2.2.1a/debian/changelog +--- samba-2.2.1a-bak/debian/changelog Thu Aug 23 10:27:54 2001 ++++ samba-2.2.1a/debian/changelog Thu Aug 23 10:28:08 2001 +@@ -1,3 +1,12 @@ ++samba (2.2.1a-4.1) unstable; urgency=low ++ ++ * Fix up the build system to avoid needing to run configure as root to ++ answer questions we already know the answers to. ++ * In the process, make surprising progress towards being able to ++ cross-compile the samba packages. ++ ++ -- Steve Langasek <vorlon@debian.org> Wed, 22 Aug 2001 23:35:00 -0500 ++ + samba (2.2.1a-4) unstable; urgency=low + + * Fixed typo in smbmount's mount page. +diff -uNrw samba-2.2.1a-bak/debian/config.cache samba-2.2.1a/debian/config.cache +--- samba-2.2.1a-bak/debian/config.cache Wed Dec 31 18:00:00 1969 ++++ samba-2.2.1a/debian/config.cache Thu Aug 23 10:28:08 2001 +@@ -0,0 +1,231 @@ ++# ++# 22 August 2001 Steve Langasek <vorlon@debian.org> ++# ++# This file is a shell script that caches the results of configure ++# tests run on this system so they can be shared between configure ++# scripts and configure runs. It is not useful on other systems. ++# If it contains results you don't want to keep, you may remove or edit it. ++# ++# By default, configure uses ./config.cache as the cache file, ++# creating it if it does not exist already. You can give configure ++# the --cache-file=FILE option to use a different cache file; that is ++# what configure does when it calls configure scripts in ++# subdirectories, so they share the cache. ++# Giving --cache-file=/dev/null disables caching, for debugging configure. ++# config.status only pays attention to the cache file if you give it the ++# --recheck option to rerun configure. ++# ++# ++# This config.cache file contains a list of acceptable autoconf ++# values which can be used in compiling Samba for Debian woody/sid. ++# ++# Autoconf sorts options alphabetically in its output. This file ++# groups options logically. ++ ++ ++# Load any architecture-specific settings ++if [ -n "$DEB_HOST_GNU_TYPE" \ ++ -a -f ../debian/config.cache.${DEB_HOST_GNU_TYPE} ]; then ++ . ../debian/config.cache.${DEB_HOST_GNU_TYPE} ++fi ++ ++ ++# This is at the top because it's most in need of regular tweaking. ++# These are options which are supported on 2.4 kernels, but not on 2.2 ++# kernels. ++ ++samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=${samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=no} ++samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=${samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=no} ++samba_cv_HAVE_KERNEL_SHARE_MODES=${samba_cv_HAVE_KERNEL_SHARE_MODES=no} ++ ++ ++# These are present in 2.2 kernels, but not in 2.0... ++ ++samba_cv_have_setresuid=${samba_cv_have_setresuid=yes} ++samba_cv_have_setresgid=${samba_cv_have_setresgid=yes} ++samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=yes} ++ ++ ++# POSIX ACL support not present in Linux 2.2; not allowed in the ++# Debian packages, even if present on the build machine. ++ ++ac_cv_header_sys_acl_h=${ac_cv_header_sys_acl_h=no} ++ ++ ++# Various basic libc/compiler stuff that it's blindingly obvious that ++# Linux supports (now watch me get bitten for saying that) ++ ++ac_cv_c_const=${ac_cv_c_const=yes} ++ac_cv_c_inline=${ac_cv_c_inline=inline} ++samba_cv_volatile=${samba_cv_volatile=yes} ++ac_cv_dirent_d_off=${ac_cv_dirent_d_off=yes} ++ac_cv_func_bzero=${ac_cv_func_bzero=yes} ++ac_cv_func_chmod=${ac_cv_func_chmod=yes} ++ac_cv_func_chown=${ac_cv_func_chown=yes} ++ac_cv_func_chroot=${ac_cv_func_chroot=yes} ++ac_cv_func_connect=${ac_cv_func_connect=yes} ++ac_cv_func_dup2=${ac_cv_func_dup2=yes} ++ac_cv_func_execl=${ac_cv_func_execl=yes} ++ac_cv_func_fchmod=${ac_cv_func_fchmod=yes} ++ac_cv_func_fchown=${ac_cv_func_fchown=yes} ++ac_cv_func_fstat=${ac_cv_func_fstat=yes} ++ac_cv_func_fsync=${ac_cv_func_fsync=yes} ++ac_cv_func_ftruncate=${ac_cv_func_ftruncate=yes} ++ac_cv_func_getcwd=${ac_cv_func_getcwd=yes} ++ac_cv_func_getgrent=${ac_cv_func_getgrent=yes} ++ac_cv_func_getgrnam=${ac_cv_func_getgrnam=yes} ++ac_cv_func_getspnam=${ac_cv_func_getspnam=yes} ++ac_cv_func_glob=${ac_cv_func_glob=yes} ++ac_cv_func_grantpt=${ac_cv_func_grantpt=yes} ++ac_cv_func_initgroups=${ac_cv_func_initgroups=yes} ++ac_cv_func_llseek=${ac_cv_func_llseek=yes} ++ac_cv_func_memcmp_clean=${ac_cv_func_memcmp_clean=yes} ++ac_cv_func_memmove=${ac_cv_func_memmove=yes} ++ac_cv_func_memset=${ac_cv_func_memset=yes} ++ac_cv_func_mktime=${ac_cv_func_mktime=yes} ++ac_cv_func_pipe=${ac_cv_func_pipe=yes} ++ac_cv_func_poll=${ac_cv_func_poll=yes} ++ac_cv_func_pread=${ac_cv_func_pread=yes} ++ac_cv_func_pwrite=${ac_cv_func_pwrite=yes} ++ac_cv_func_rand=${ac_cv_func_rand=yes} ++ac_cv_func_random=${ac_cv_func_random=yes} ++ac_cv_func_readlink=${ac_cv_func_readlink=yes} ++ac_cv_func_rename=${ac_cv_func_rename=yes} ++ac_cv_func_select=${ac_cv_func_select=yes} ++ac_cv_func_setenv=${ac_cv_func_setenv=yes} ++ac_cv_func_setgroups=${ac_cv_func_setgroups=yes} ++ac_cv_func_setsid=${ac_cv_func_setsid=yes} ++ac_cv_func_sigaction=${ac_cv_func_sigaction=yes} ++ac_cv_func_sigblock=${ac_cv_func_sigblock=yes} ++ac_cv_func_sigprocmask=${ac_cv_func_sigprocmask=yes} ++ac_cv_func_snprintf=${ac_cv_func_snprintf=yes} ++ac_cv_func_srand=${ac_cv_func_srand=yes} ++ac_cv_func_srandom=${ac_cv_func_srandom=yes} ++ac_cv_func_strcasecmp=${ac_cv_func_strcasecmp=yes} ++ac_cv_func_strchr=${ac_cv_func_strchr=yes} ++ac_cv_func_strdup=${ac_cv_func_strdup=yes} ++ac_cv_func_strerror=${ac_cv_func_strerror=yes} ++ac_cv_func_strftime=${ac_cv_func_strftime=yes} ++ac_cv_func_strpbrk=${ac_cv_func_strpbrk=yes} ++ac_cv_func_strtoul=${ac_cv_func_strtoul=yes} ++ac_cv_func_symlink=${ac_cv_func_symlink=yes} ++ac_cv_func_usleep=${ac_cv_func_usleep=yes} ++ac_cv_func_utime=${ac_cv_func_utime=yes} ++ac_cv_func_utimes=${ac_cv_func_utimes=yes} ++ac_cv_func_vsnprintf=${ac_cv_func_vsnprintf=yes} ++ac_cv_func_waitpid=${ac_cv_func_waitpid=yes} ++ac_cv_type_ino_t=${ac_cv_type_ino_t=yes} ++ac_cv_type_mode_t=${ac_cv_type_mode_t=yes} ++ac_cv_type_pid_t=${ac_cv_type_pid_t=yes} ++ac_cv_type_size_t=${ac_cv_type_size_t=yes} ++ac_cv_type_uid_t=${ac_cv_type_uid_t=yes} ++samba_cv_socklen_t=${samba_cv_socklen_t=yes} ++ ++# Yes, we know Linux supports fcntl locking. Just ignore ++# any errors caused by building on an NFS mount. ++samba_cv_HAVE_FCNTL_LOCK=${samba_cv_HAVE_FCNTL_LOCK=yes} ++ ++ ++# smbwrapper doesn't work because the glibc maintainers don't want ++# to support transparent userland VFS. We might as well preempt ++# any checks for shadowed symbols that are only useful for smbwrapper. ++ ++ac_cv_func___acl=${ac_cv_func___acl=no} ++ac_cv_func__acl=${ac_cv_func__acl=no} ++ac_cv_func___chdir=${ac_cv_func___chdir=no} ++ac_cv_func__chdir=${ac_cv_func__chdir=no} ++ac_cv_func___close=${ac_cv_func___close=no} ++ac_cv_func__close=${ac_cv_func__close=no} ++ac_cv_func___closedir=${ac_cv_func___closedir=no} ++ac_cv_func__closedir=${ac_cv_func__closedir=no} ++ac_cv_func___dup=${ac_cv_func___dup=no} ++ac_cv_func__dup=${ac_cv_func__dup=no} ++ac_cv_func___dup2=${ac_cv_func___dup2=no} ++ac_cv_func__dup2=${ac_cv_func__dup2=no} ++ac_cv_func___facl=${ac_cv_func___facl=no} ++ac_cv_func__facl=${ac_cv_func__facl=no} ++ac_cv_func___fchdir=${ac_cv_func___fchdir=no} ++ac_cv_func__fchdir=${ac_cv_func__fchdir=no} ++ac_cv_func___fcntl=${ac_cv_func___fcntl=no} ++ac_cv_func__fcntl=${ac_cv_func__fcntl=no} ++ac_cv_func___fork=${ac_cv_func___fork=no} ++ac_cv_func__fork=${ac_cv_func__fork=no} ++ac_cv_func___fstat=${ac_cv_func___fstat=no} ++ac_cv_func__fstat=${ac_cv_func__fstat=no} ++ac_cv_func___fstat64=${ac_cv_func___fstat64=no} ++ac_cv_func__fstat64=${ac_cv_func__fstat64=no} ++ac_cv_func___fxstat=${ac_cv_func___fxstat=no} ++ac_cv_func___getcwd=${ac_cv_func___getcwd=no} ++ac_cv_func__getcwd=${ac_cv_func__getcwd=no} ++ac_cv_func___getdents=${ac_cv_func___getdents=no} ++ac_cv_func__getdents=${ac_cv_func__getdents=no} ++ac_cv_func___llseek=${ac_cv_func___llseek=no} ++ac_cv_func___sys_llseek=${ac_cv_func___sys_llseek=no} ++ac_cv_func__llseek=${ac_cv_func__llseek=no} ++ac_cv_func___lseek=${ac_cv_func___lseek=no} ++ac_cv_func__lseek=${ac_cv_func__lseek=no} ++ac_cv_func___lstat=${ac_cv_func___lstat=no} ++ac_cv_func__lstat=${ac_cv_func__lstat=no} ++ac_cv_func___lstat64=${ac_cv_func___lstat64=no} ++ac_cv_func__lstat64=${ac_cv_func__lstat64=no} ++ac_cv_func___lxstat=${ac_cv_func___lxstat=no} ++ac_cv_func___open=${ac_cv_func___open=no} ++ac_cv_func__open=${ac_cv_func__open=no} ++ac_cv_func___open64=${ac_cv_func___open64=no} ++ac_cv_func__open64=${ac_cv_func__open64=no} ++ac_cv_func___opendir=${ac_cv_func___opendir=no} ++ac_cv_func__opendir=${ac_cv_func__opendir=no} ++ac_cv_func___pread=${ac_cv_func___pread=no} ++ac_cv_func__pread=${ac_cv_func__pread=no} ++ac_cv_func___pread64=${ac_cv_func___pread64=no} ++ac_cv_func__pread64=${ac_cv_func__pread64=no} ++ac_cv_func___pwrite=${ac_cv_func___pwrite=no} ++ac_cv_func__pwrite=${ac_cv_func__pwrite=no} ++ac_cv_func___pwrite64=${ac_cv_func___pwrite64=no} ++ac_cv_func__pwrite64=${ac_cv_func__pwrite64=no} ++ac_cv_func___read=${ac_cv_func___read=no} ++ac_cv_func__read=${ac_cv_func__read=no} ++ac_cv_func___readdir=${ac_cv_func___readdir=no} ++ac_cv_func__readdir=${ac_cv_func__readdir=no} ++ac_cv_func___readdir64=${ac_cv_func___readdir64=no} ++ac_cv_func__readdir64=${ac_cv_func__readdir64=no} ++ac_cv_func___seekdir=${ac_cv_func___seekdir=no} ++ac_cv_func__seekdir=${ac_cv_func__seekdir=no} ++ac_cv_func___stat=${ac_cv_func___stat=no} ++ac_cv_func__stat=${ac_cv_func__stat=no} ++ac_cv_func___stat64=${ac_cv_func___stat64=no} ++ac_cv_func__stat64=${ac_cv_func__stat64=no} ++ac_cv_func___telldir=${ac_cv_func___telldir=no} ++ac_cv_func__telldir=${ac_cv_func__telldir=no} ++ac_cv_func___write=${ac_cv_func___write=no} ++ac_cv_func__write=${ac_cv_func__write=no} ++ac_cv_func___xstat=${ac_cv_func___xstat=no} ++ ++ ++ ++# Miscellaneous stuff that isn't, and shouldn't be, available ++# in Debian. Those interested in building debs for other systems may ++# need to remove some of these defines. ++ ++ac_cv_func_bigcrypt=${ac_cv_func_bigcrypt=no} ++ac_cv_func_crypt16=${ac_cv_func_crypt16=no} ++ac_cv_func_getauthuid=${ac_cv_func_getauthuid=no} ++ac_cv_func_getprpwnam=${ac_cv_func_getprpwnam=no} ++ac_cv_func_getpwanam=${ac_cv_func_getpwanam=no} ++ac_cv_func_putprpwnam=${ac_cv_func_putprpwnam=no} ++ac_cv_func_rdchk=${ac_cv_func_rdchk=no} ++ac_cv_func_set_auth_parameters=${ac_cv_func_set_auth_parameters=no} ++ac_cv_func_setgidx=${ac_cv_func_setgidx=no} ++ac_cv_func_setluid=${ac_cv_func_setluid=no} ++ac_cv_func_setpriv=${ac_cv_func_setpriv=no} ++ac_cv_func_setuidx=${ac_cv_func_setuidx=no} ++ac_cv_lib_sec_bigcrypt=${ac_cv_lib_sec_bigcrypt=no} ++ac_cv_lib_sec_getprpwnam=${ac_cv_lib_sec_getprpwnam=no} ++ac_cv_lib_sec_getspnam=${ac_cv_lib_sec_getspnam=no} ++ac_cv_lib_sec_putprpwnam=${ac_cv_lib_sec_putprpwnam=no} ++ac_cv_lib_sec_set_auth_parameters=${ac_cv_lib_sec_set_auth_parameters=no} ++ac_cv_lib_security_bigcrypt=${ac_cv_lib_security_bigcrypt=no} ++ac_cv_lib_security_getprpwnam=${ac_cv_lib_security_getprpwnam=no} ++ac_cv_lib_security_getspnam=${ac_cv_lib_security_getspnam=no} ++ac_cv_lib_security_putprpwnam=${ac_cv_lib_security_putprpwnam=no} ++ac_cv_lib_security_set_auth_parameters=${ac_cv_lib_security_set_auth_parameters=no} +diff -uNrw samba-2.2.1a-bak/debian/config.cache.alpha-linux samba-2.2.1a/debian/config.cache.alpha-linux +--- samba-2.2.1a-bak/debian/config.cache.alpha-linux Wed Dec 31 18:00:00 1969 ++++ samba-2.2.1a/debian/config.cache.alpha-linux Thu Aug 23 10:28:08 2001 +@@ -0,0 +1,12 @@ ++# 22 Aug 2001 Steve Langasek <vorlon@debian.org> ++ ++# This file contains autoconf settings specific to the alpha-linux ++# platform that should be preloaded when building for this architecture. ++ ++ ++# Linux 2.2 on Alpha doesn't have a functional setresgid() call, but ++# Linux 2.4 does. Ensure that packages compiled for woody remain ++# compatible with 2.2 kernels, even if the build machine is running 2.4. ++samba_cv_have_setresgid=${samba_cv_have_setresgid=no} ++samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no} ++samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} +diff -uNrw samba-2.2.1a-bak/debian/rules samba-2.2.1a/debian/rules +--- samba-2.2.1a-bak/debian/rules Thu Aug 23 10:27:54 2001 ++++ samba-2.2.1a/debian/rules Thu Aug 23 10:28:08 2001 +@@ -15,6 +15,14 @@ + # This has to be exported to make some magic below work. + export DH_OPTIONS + ++# Set the host and build architectures for use with config.cache loading, ++# cross-building, etc. ++DEB_HOST_GNU_TYPE := $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) ++DEB_BUILD_GNU_TYPE := $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) ++ ++export DEB_HOST_GNU_TYPE ++export DEB_BUILD_GNU_TYPE ++ + BVARS = SMBLOGFILE=/var/log/smb NMBLOGFILE=/var/log/nmb + + DESTDIR=`pwd`/debian/samba +@@ -48,8 +56,11 @@ + # ./configure --with-fhs --prefix=/usr --sysconfdir=/etc \ + # --localstatedir=/var + ++ if [ -f debian/config.cache ]; then \ ++ cp -f debian/config.cache source/config.cache; \ ++ fi + # [ -f source/Makefile ] || (cd source && ./configure --with-fhs --prefix=/usr --exec-prefix=/usr --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp) +- [ -f source/Makefile ] || (cd source && ./configure --with-fhs --prefix=/usr --sysconfdir=/etc --with-privatedir=/etc/samba --with-lockdir=/var/state/samba --localstatedir=/var --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp --with-readline --with-pam_smbpass) ++ [ -f source/Makefile ] || (cd source && ./configure --host=$(DEB_HOST_GNU_TYPE)-gnu --build=$(DEB_BUILD_GNU_TYPE)-gnu --with-fhs --prefix=/usr --sysconfdir=/etc --with-privatedir=/etc/samba --with-lockdir=/var/state/samba --localstatedir=/var --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp --with-readline --with-pam_smbpass) + + touch configure-stamp + diff --git a/packaging/Debian/debian-stable/README.build-upstream b/packaging/Debian/debian-woody/README.build-upstream index 24d2c1c93c..24d2c1c93c 100644 --- a/packaging/Debian/debian-stable/README.build-upstream +++ b/packaging/Debian/debian-woody/README.build-upstream diff --git a/packaging/Debian/debian-stable/README.debian b/packaging/Debian/debian-woody/README.debian index 5ea80e32ae..4afe04f6df 100644 --- a/packaging/Debian/debian-stable/README.debian +++ b/packaging/Debian/debian-woody/README.debian @@ -1,6 +1,6 @@ 0. Samba Team Notes: -This package is targeted at the current stable release of debian distribution -(woody) running on a 2.4.x kernel. +This package is targeted at the woody release of debian distribution +running on a 2.4.x kernel. This package has been made by Simo Sorce on behalf of the Samba Team. Do not use Debian BTS to report bugs, it's not a debian project package. Thanks to Eloy Paris and Steve "Vorlon" Langasek for the work they've done diff --git a/packaging/Debian/debian-woody/TODO b/packaging/Debian/debian-woody/TODO new file mode 100644 index 0000000000..5883f72a92 --- /dev/null +++ b/packaging/Debian/debian-woody/TODO @@ -0,0 +1,4 @@ +Nothing in our list right now. + +Debian Samba Maintainers.- +Sun Apr 6 01:34:21 EST 2003 diff --git a/packaging/Debian/debian-stable/changelog b/packaging/Debian/debian-woody/changelog index 4a5d7201ec..d05fabac05 100644 --- a/packaging/Debian/debian-stable/changelog +++ b/packaging/Debian/debian-woody/changelog @@ -1,3 +1,15 @@ +samba (3.0.20b-1woody1) stable; urgency=low + + * samba 3.0.20b release + + -- Simo Sorce <idra@samba.org> Sun, 23 October 2005 19:26:00 +0200 + +samba (3.0.14a-1) stable; urgency=high + + * samba 3.0.14a release + + -- Simo Sorce <idra@samba.org> Thu, 21 April 2005 12:30:00 +0200 + samba (3.0.13-1) stable; urgency=high * samba 3.0.13 release diff --git a/packaging/Debian/debian-woody/config.cache b/packaging/Debian/debian-woody/config.cache new file mode 100644 index 0000000000..8872a27b76 --- /dev/null +++ b/packaging/Debian/debian-woody/config.cache @@ -0,0 +1,221 @@ +# +# 22 August 2001 Steve Langasek <vorlon@debian.org> +# +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +# +# This config.cache file contains a list of acceptable autoconf +# values which can be used in compiling Samba for Debian woody/sid. +# +# Autoconf sorts options alphabetically in its output. This file +# groups options logically. + + +# Load any architecture-specific settings +if [ -n "$DEB_HOST_GNU_TYPE" \ + -a -f ../debian/config.cache.${DEB_HOST_GNU_TYPE} ]; then + . ../debian/config.cache.${DEB_HOST_GNU_TYPE} +fi + + +# This is at the top because it's most in need of regular tweaking. +# These are options which are supported on 2.4 kernels, but not on 2.2 +# kernels. + +samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=${samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=no} +samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=${samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=no} +samba_cv_HAVE_KERNEL_SHARE_MODES=${samba_cv_HAVE_KERNEL_SHARE_MODES=no} + + +# These are present in 2.2 kernels, but not in 2.0... + +samba_cv_have_setresuid=${samba_cv_have_setresuid=yes} +samba_cv_have_setresgid=${samba_cv_have_setresgid=yes} +samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=yes} + + +# Various basic libc/compiler stuff that it's blindingly obvious that +# Linux supports (now watch me get bitten for saying that) + +ac_cv_c_const=${ac_cv_c_const=yes} +ac_cv_c_inline=${ac_cv_c_inline=inline} +samba_cv_volatile=${samba_cv_volatile=yes} +ac_cv_dirent_d_off=${ac_cv_dirent_d_off=yes} +ac_cv_func_bzero=${ac_cv_func_bzero=yes} +ac_cv_func_chmod=${ac_cv_func_chmod=yes} +ac_cv_func_chown=${ac_cv_func_chown=yes} +ac_cv_func_chroot=${ac_cv_func_chroot=yes} +ac_cv_func_connect=${ac_cv_func_connect=yes} +ac_cv_func_dup2=${ac_cv_func_dup2=yes} +ac_cv_func_execl=${ac_cv_func_execl=yes} +ac_cv_func_fchmod=${ac_cv_func_fchmod=yes} +ac_cv_func_fchown=${ac_cv_func_fchown=yes} +ac_cv_func_fstat=${ac_cv_func_fstat=yes} +ac_cv_func_fsync=${ac_cv_func_fsync=yes} +ac_cv_func_ftruncate=${ac_cv_func_ftruncate=yes} +ac_cv_func_getcwd=${ac_cv_func_getcwd=yes} +ac_cv_func_getgrent=${ac_cv_func_getgrent=yes} +ac_cv_func_getgrnam=${ac_cv_func_getgrnam=yes} +ac_cv_func_getspnam=${ac_cv_func_getspnam=yes} +ac_cv_func_glob=${ac_cv_func_glob=yes} +ac_cv_func_grantpt=${ac_cv_func_grantpt=yes} +ac_cv_func_initgroups=${ac_cv_func_initgroups=yes} +ac_cv_func_llseek=${ac_cv_func_llseek=yes} +ac_cv_func_memcmp_clean=${ac_cv_func_memcmp_clean=yes} +ac_cv_func_memmove=${ac_cv_func_memmove=yes} +ac_cv_func_memset=${ac_cv_func_memset=yes} +ac_cv_func_mktime=${ac_cv_func_mktime=yes} +ac_cv_func_pipe=${ac_cv_func_pipe=yes} +ac_cv_func_poll=${ac_cv_func_poll=yes} +ac_cv_func_pread=${ac_cv_func_pread=yes} +ac_cv_func_pwrite=${ac_cv_func_pwrite=yes} +ac_cv_func_rand=${ac_cv_func_rand=yes} +ac_cv_func_random=${ac_cv_func_random=yes} +ac_cv_func_readlink=${ac_cv_func_readlink=yes} +ac_cv_func_rename=${ac_cv_func_rename=yes} +ac_cv_func_select=${ac_cv_func_select=yes} +ac_cv_func_setenv=${ac_cv_func_setenv=yes} +ac_cv_func_setgroups=${ac_cv_func_setgroups=yes} +ac_cv_func_setsid=${ac_cv_func_setsid=yes} +ac_cv_func_sigaction=${ac_cv_func_sigaction=yes} +ac_cv_func_sigblock=${ac_cv_func_sigblock=yes} +ac_cv_func_sigprocmask=${ac_cv_func_sigprocmask=yes} +ac_cv_func_snprintf=${ac_cv_func_snprintf=yes} +ac_cv_func_srand=${ac_cv_func_srand=yes} +ac_cv_func_srandom=${ac_cv_func_srandom=yes} +ac_cv_func_strcasecmp=${ac_cv_func_strcasecmp=yes} +ac_cv_func_strchr=${ac_cv_func_strchr=yes} +ac_cv_func_strdup=${ac_cv_func_strdup=yes} +ac_cv_func_strerror=${ac_cv_func_strerror=yes} +ac_cv_func_strftime=${ac_cv_func_strftime=yes} +ac_cv_func_strpbrk=${ac_cv_func_strpbrk=yes} +ac_cv_func_strtoul=${ac_cv_func_strtoul=yes} +ac_cv_func_symlink=${ac_cv_func_symlink=yes} +ac_cv_func_usleep=${ac_cv_func_usleep=yes} +ac_cv_func_utime=${ac_cv_func_utime=yes} +ac_cv_func_utimes=${ac_cv_func_utimes=yes} +ac_cv_func_vsnprintf=${ac_cv_func_vsnprintf=yes} +ac_cv_func_waitpid=${ac_cv_func_waitpid=yes} +ac_cv_type_ino_t=${ac_cv_type_ino_t=yes} +ac_cv_type_mode_t=${ac_cv_type_mode_t=yes} +ac_cv_type_pid_t=${ac_cv_type_pid_t=yes} +ac_cv_type_size_t=${ac_cv_type_size_t=yes} +ac_cv_type_uid_t=${ac_cv_type_uid_t=yes} +samba_cv_socklen_t=${samba_cv_socklen_t=yes} + +# Yes, we know Linux supports fcntl locking. Just ignore +# any errors caused by building on an NFS mount. +samba_cv_HAVE_FCNTL_LOCK=${samba_cv_HAVE_FCNTL_LOCK=yes} + + +# smbwrapper doesn't work because the glibc maintainers don't want +# to support transparent userland VFS. We might as well preempt +# any checks for shadowed symbols that are only useful for smbwrapper. + +ac_cv_func___chdir=${ac_cv_func___chdir=no} +ac_cv_func__chdir=${ac_cv_func__chdir=no} +ac_cv_func___close=${ac_cv_func___close=no} +ac_cv_func__close=${ac_cv_func__close=no} +ac_cv_func___closedir=${ac_cv_func___closedir=no} +ac_cv_func__closedir=${ac_cv_func__closedir=no} +ac_cv_func___dup=${ac_cv_func___dup=no} +ac_cv_func__dup=${ac_cv_func__dup=no} +ac_cv_func___dup2=${ac_cv_func___dup2=no} +ac_cv_func__dup2=${ac_cv_func__dup2=no} +ac_cv_func___fchdir=${ac_cv_func___fchdir=no} +ac_cv_func__fchdir=${ac_cv_func__fchdir=no} +ac_cv_func___fcntl=${ac_cv_func___fcntl=no} +ac_cv_func__fcntl=${ac_cv_func__fcntl=no} +ac_cv_func___fork=${ac_cv_func___fork=no} +ac_cv_func__fork=${ac_cv_func__fork=no} +ac_cv_func___fstat=${ac_cv_func___fstat=no} +ac_cv_func__fstat=${ac_cv_func__fstat=no} +ac_cv_func___fstat64=${ac_cv_func___fstat64=no} +ac_cv_func__fstat64=${ac_cv_func__fstat64=no} +ac_cv_func___fxstat=${ac_cv_func___fxstat=no} +ac_cv_func___getcwd=${ac_cv_func___getcwd=no} +ac_cv_func__getcwd=${ac_cv_func__getcwd=no} +ac_cv_func___getdents=${ac_cv_func___getdents=no} +ac_cv_func__getdents=${ac_cv_func__getdents=no} +ac_cv_func___llseek=${ac_cv_func___llseek=no} +ac_cv_func___sys_llseek=${ac_cv_func___sys_llseek=no} +ac_cv_func__llseek=${ac_cv_func__llseek=no} +ac_cv_func___lseek=${ac_cv_func___lseek=no} +ac_cv_func__lseek=${ac_cv_func__lseek=no} +ac_cv_func___lstat=${ac_cv_func___lstat=no} +ac_cv_func__lstat=${ac_cv_func__lstat=no} +ac_cv_func___lstat64=${ac_cv_func___lstat64=no} +ac_cv_func__lstat64=${ac_cv_func__lstat64=no} +ac_cv_func___lxstat=${ac_cv_func___lxstat=no} +ac_cv_func___open=${ac_cv_func___open=no} +ac_cv_func__open=${ac_cv_func__open=no} +ac_cv_func___open64=${ac_cv_func___open64=no} +ac_cv_func__open64=${ac_cv_func__open64=no} +ac_cv_func___opendir=${ac_cv_func___opendir=no} +ac_cv_func__opendir=${ac_cv_func__opendir=no} +ac_cv_func___pread=${ac_cv_func___pread=no} +ac_cv_func__pread=${ac_cv_func__pread=no} +ac_cv_func___pread64=${ac_cv_func___pread64=no} +ac_cv_func__pread64=${ac_cv_func__pread64=no} +ac_cv_func___pwrite=${ac_cv_func___pwrite=no} +ac_cv_func__pwrite=${ac_cv_func__pwrite=no} +ac_cv_func___pwrite64=${ac_cv_func___pwrite64=no} +ac_cv_func__pwrite64=${ac_cv_func__pwrite64=no} +ac_cv_func___read=${ac_cv_func___read=no} +ac_cv_func__read=${ac_cv_func__read=no} +ac_cv_func___readdir=${ac_cv_func___readdir=no} +ac_cv_func__readdir=${ac_cv_func__readdir=no} +ac_cv_func___readdir64=${ac_cv_func___readdir64=no} +ac_cv_func__readdir64=${ac_cv_func__readdir64=no} +ac_cv_func___seekdir=${ac_cv_func___seekdir=no} +ac_cv_func__seekdir=${ac_cv_func__seekdir=no} +ac_cv_func___stat=${ac_cv_func___stat=no} +ac_cv_func__stat=${ac_cv_func__stat=no} +ac_cv_func___stat64=${ac_cv_func___stat64=no} +ac_cv_func__stat64=${ac_cv_func__stat64=no} +ac_cv_func___telldir=${ac_cv_func___telldir=no} +ac_cv_func__telldir=${ac_cv_func__telldir=no} +ac_cv_func___write=${ac_cv_func___write=no} +ac_cv_func__write=${ac_cv_func__write=no} +ac_cv_func___xstat=${ac_cv_func___xstat=no} + + + +# Miscellaneous stuff that isn't, and shouldn't be, available +# in Debian. Those interested in building debs for other systems may +# need to remove some of these defines. + +ac_cv_func_bigcrypt=${ac_cv_func_bigcrypt=no} +ac_cv_func_crypt16=${ac_cv_func_crypt16=no} +ac_cv_func_getauthuid=${ac_cv_func_getauthuid=no} +ac_cv_func_getprpwnam=${ac_cv_func_getprpwnam=no} +ac_cv_func_getpwanam=${ac_cv_func_getpwanam=no} +ac_cv_func_putprpwnam=${ac_cv_func_putprpwnam=no} +ac_cv_func_rdchk=${ac_cv_func_rdchk=no} +ac_cv_func_set_auth_parameters=${ac_cv_func_set_auth_parameters=no} +ac_cv_func_setgidx=${ac_cv_func_setgidx=no} +ac_cv_func_setluid=${ac_cv_func_setluid=no} +ac_cv_func_setpriv=${ac_cv_func_setpriv=no} +ac_cv_func_setuidx=${ac_cv_func_setuidx=no} +ac_cv_lib_sec_bigcrypt=${ac_cv_lib_sec_bigcrypt=no} +ac_cv_lib_sec_getprpwnam=${ac_cv_lib_sec_getprpwnam=no} +ac_cv_lib_sec_getspnam=${ac_cv_lib_sec_getspnam=no} +ac_cv_lib_sec_putprpwnam=${ac_cv_lib_sec_putprpwnam=no} +ac_cv_lib_sec_set_auth_parameters=${ac_cv_lib_sec_set_auth_parameters=no} +ac_cv_lib_security_bigcrypt=${ac_cv_lib_security_bigcrypt=no} +ac_cv_lib_security_getprpwnam=${ac_cv_lib_security_getprpwnam=no} +ac_cv_lib_security_getspnam=${ac_cv_lib_security_getspnam=no} +ac_cv_lib_security_putprpwnam=${ac_cv_lib_security_putprpwnam=no} +ac_cv_lib_security_set_auth_parameters=${ac_cv_lib_security_set_auth_parameters=no} diff --git a/packaging/Debian/debian-woody/config.cache.alpha-linux b/packaging/Debian/debian-woody/config.cache.alpha-linux new file mode 100644 index 0000000000..6d17192026 --- /dev/null +++ b/packaging/Debian/debian-woody/config.cache.alpha-linux @@ -0,0 +1,12 @@ +# 22 Aug 2001 Steve Langasek <vorlon@debian.org> + +# This file contains autoconf settings specific to the alpha-linux +# platform that should be preloaded when building for this architecture. + + +# Linux 2.2 on Alpha doesn't have a functional setresgid() call, but +# Linux 2.4 does. Ensure that packages compiled for woody remain +# compatible with 2.2 kernels, even if the build machine is running 2.4. +samba_cv_have_setresgid=${samba_cv_have_setresgid=no} +samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no} +samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} diff --git a/packaging/Debian/debian-woody/config.cache.sparc-linux b/packaging/Debian/debian-woody/config.cache.sparc-linux new file mode 100644 index 0000000000..a2a21b1d3a --- /dev/null +++ b/packaging/Debian/debian-woody/config.cache.sparc-linux @@ -0,0 +1,13 @@ +# 24 Spe 2001 Steve Langasek <vorlon@debian.org> + +# This file contains autoconf settings specific to the sparc-linux +# platform that should be preloaded when building for this architecture. + + +# Linux 2.2 on Sparc doesn't have setresgid() or setresuid(), but +# Linux 2.4 does. Ensure that packages compiled for woody remain +# compatible with 2.2 kernels, even if the build machine is running 2.4. +samba_cv_have_setresuid=${samba_cv_have_setresuid=no} +samba_cv_have_setresgid=${samba_cv_have_setresgid=no} +samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no} +samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes} diff --git a/packaging/Debian/debian-stable/control b/packaging/Debian/debian-woody/control index 4ef4445695..4ef4445695 100644 --- a/packaging/Debian/debian-stable/control +++ b/packaging/Debian/debian-woody/control diff --git a/packaging/Debian/debian-stable/copyright b/packaging/Debian/debian-woody/copyright index e74a64fa5b..e74a64fa5b 100644 --- a/packaging/Debian/debian-stable/copyright +++ b/packaging/Debian/debian-woody/copyright diff --git a/packaging/Debian/debian-woody/gdbcommands b/packaging/Debian/debian-woody/gdbcommands new file mode 100644 index 0000000000..5774b9ae31 --- /dev/null +++ b/packaging/Debian/debian-woody/gdbcommands @@ -0,0 +1,2 @@ +bt +quit diff --git a/packaging/Debian/debian-woody/libpam-smbpass.docs b/packaging/Debian/debian-woody/libpam-smbpass.docs new file mode 100644 index 0000000000..89fbbf9042 --- /dev/null +++ b/packaging/Debian/debian-woody/libpam-smbpass.docs @@ -0,0 +1,2 @@ +source/pam_smbpass/README +source/pam_smbpass/TODO diff --git a/packaging/Debian/debian-woody/libpam-smbpass.examples b/packaging/Debian/debian-woody/libpam-smbpass.examples new file mode 100644 index 0000000000..48d841b2c1 --- /dev/null +++ b/packaging/Debian/debian-woody/libpam-smbpass.examples @@ -0,0 +1,5 @@ +source/pam_smbpass/samples/README +source/pam_smbpass/samples/kdc-pdc +source/pam_smbpass/samples/password-mature +source/pam_smbpass/samples/password-migration +source/pam_smbpass/samples/password-sync diff --git a/packaging/Debian/debian-woody/libpam-smbpass.files b/packaging/Debian/debian-woody/libpam-smbpass.files new file mode 100644 index 0000000000..4263df5c0f --- /dev/null +++ b/packaging/Debian/debian-woody/libpam-smbpass.files @@ -0,0 +1 @@ +lib/security/pam_smbpass.so diff --git a/packaging/Debian/debian-woody/libsmbclient-dev.examples b/packaging/Debian/debian-woody/libsmbclient-dev.examples new file mode 100644 index 0000000000..2094c40b55 --- /dev/null +++ b/packaging/Debian/debian-woody/libsmbclient-dev.examples @@ -0,0 +1 @@ +examples/libsmbclient/ diff --git a/packaging/Debian/debian-woody/libsmbclient-dev.files b/packaging/Debian/debian-woody/libsmbclient-dev.files new file mode 100644 index 0000000000..a52c17cfc5 --- /dev/null +++ b/packaging/Debian/debian-woody/libsmbclient-dev.files @@ -0,0 +1,3 @@ +usr/lib/libsmbclient.a +usr/lib/libsmbclient.so +usr/include/libsmbclient.h diff --git a/packaging/Debian/debian-woody/libsmbclient.files b/packaging/Debian/debian-woody/libsmbclient.files new file mode 100644 index 0000000000..18b7f3b165 --- /dev/null +++ b/packaging/Debian/debian-woody/libsmbclient.files @@ -0,0 +1,2 @@ +usr/lib/libsmbclient.so.0.1 +usr/lib/libsmbclient.so.0 diff --git a/packaging/Debian/debian-stable/libsmbclient.shlibs b/packaging/Debian/debian-woody/libsmbclient.shlibs index 9c6eea200a..9c6eea200a 100644 --- a/packaging/Debian/debian-stable/libsmbclient.shlibs +++ b/packaging/Debian/debian-woody/libsmbclient.shlibs diff --git a/packaging/Debian/debian-woody/mksmbpasswd.8 b/packaging/Debian/debian-woody/mksmbpasswd.8 new file mode 100644 index 0000000000..0a500102e8 --- /dev/null +++ b/packaging/Debian/debian-woody/mksmbpasswd.8 @@ -0,0 +1,28 @@ +.TH MKSMBPASSWD 8 12-Apr-1998 +.SH NAME +mksmbpasswd \- formats a /etc/passwd entry for a smbpasswd file +.SH SYNOPSIS +mksmbpasswd cat /etc/passwd | /usr/sbin/mksmbpasswd > /etc/samba/smbpasswd +.SH DESCRIPTION +.B mksmbpasswd +should be used only once, the first time Samba is installed. The idea +is to ease accounts creation by transferring all user accounts from +/etc/passwd to /etc/samba/smbpasswd. +.PP +Please note that passwords are not transferred automatically from +/etc/passwd to the new /etc/samba/smbpasswd file. After running +.B mksmbpasswd +all accounts are disabled so the system administrator must run +smbpasswd for each account that needs to be enable. +.SH FILES +.TP +/etc/passwd +System wide accounts file +.TP +/etc/samba/smbpasswd +Encrypted passwords file for the Samba daemons +.SH SEE ALSO +samba(7), nmbd(8), smbd(8) +.SH AUTHOR +Eloy A. Paris <peloy@debian.org> (man page based on sendmailconfig's man page +by Robert Leslie <rob@mars.org>) diff --git a/packaging/Debian/debian-woody/mksmbpasswd.awk b/packaging/Debian/debian-woody/mksmbpasswd.awk new file mode 100644 index 0000000000..a7b41a725d --- /dev/null +++ b/packaging/Debian/debian-woody/mksmbpasswd.awk @@ -0,0 +1,5 @@ +#!/usr/bin/awk -f +BEGIN {FS=":" + printf("#\n# SMB password file.\n#\n") + } +{ printf( "%s:%s:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:[U ]:LCT-00000000:%s\n", $1, $3, $5) } diff --git a/packaging/Debian/debian-stable/mount.cifs.files b/packaging/Debian/debian-woody/mount.cifs.files index d5bb66ede4..d5bb66ede4 100644 --- a/packaging/Debian/debian-stable/mount.cifs.files +++ b/packaging/Debian/debian-woody/mount.cifs.files diff --git a/packaging/Debian/debian-woody/panic-action b/packaging/Debian/debian-woody/panic-action new file mode 100644 index 0000000000..13f773c1ef --- /dev/null +++ b/packaging/Debian/debian-woody/panic-action @@ -0,0 +1,48 @@ +#!/bin/sh + +# Redirect all output to our mail command +( + # We must be given a pid to look at + if [ -z "$1" ]; then + echo "$0 called with no arguments." + exit 1 + fi + + if [ ! -d "/proc/$1" ]; then + echo "$0: No such process: $1" + exit 1 + fi + + # Find out what binary we're debugging + BINARYNAME=`readlink "/proc/$1/exe"` + + # Generic header for our email + echo "The Samba 'panic action' script, $0," + echo "was called for pid $1 ($BINARYNAME)." + echo + + if [ -z "$BINARYNAME" ]; then + echo "This means there was a problem with the program, such as a segfault." + echo "However, the executable could not be found for process $1." + echo "It may have died unexpectedly, or you may not have permission to" + echo "debug the process." + exit 1 + fi + + # No debugger + if [ ! -x /usr/bin/gdb ]; then + echo "This means there was a problem with the program, such as a segfault." + echo "However, gdb was not found on your system, so the error could not be" + echo "debugged. Please install the gdb package so that debugging information is" + echo "available the next time such a problem occurs." + exit 1 + fi + + echo "Below is a backtrace for this process generated with gdb, which shows" + echo "the state of the program at the time the error occured. You are" + echo "encouraged to submit this information as a bug report to Debian. For" + echo "information about the procedure for submitting bug reports , please see" + echo "http://www.debian.org/Bugs/Reporting or the reportbug(1) manpage." + echo + gdb -x /etc/samba/gdbcommands -batch "$BINARYNAME" "$1" +) | mail -s "Segfault in Samba" root diff --git a/packaging/Debian/debian-stable/patches/documentation.patch b/packaging/Debian/debian-woody/patches/documentation.patch index ab64790fc9..ab64790fc9 100644 --- a/packaging/Debian/debian-stable/patches/documentation.patch +++ b/packaging/Debian/debian-woody/patches/documentation.patch diff --git a/packaging/Debian/debian-stable/patches/fhs.patch b/packaging/Debian/debian-woody/patches/fhs.patch index 760306a3c3..3fce15de78 100644 --- a/packaging/Debian/debian-stable/patches/fhs.patch +++ b/packaging/Debian/debian-woody/patches/fhs.patch @@ -457,26 +457,26 @@ diff -uNr samba-3.0.0beta2.orig/source/printing/printing_db.c samba-3.0.0beta2/s pstrcat(printdb_path, printername); pstrcat(printdb_path, ".tdb"); -diff -uNr samba-3.0.0beta2.orig/source/registry/reg_db.c samba-3.0.0beta2/source/registry/reg_db.c ---- samba-3.0.0beta2.orig/source/registry/reg_db.c 2003-07-02 23:26:47.000000000 -0500 -+++ samba-3.0.0beta2/source/registry/reg_db.c 2003-07-02 23:19:02.000000000 -0500 -@@ -131,13 +131,13 @@ - * if we need to init the data in the registry - */ - -- tdb_reg = tdb_open_log(lock_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600); -+ tdb_reg = tdb_open_log(state_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600); - if ( !tdb_reg ) - { +diff -uNr samba-3.0.20b.orig/source/registry/reg_db.c samba-3.0.20b/source/registry/reg_db.c +--- samba-3.0.20b.orig/source/registry/reg_db.c 2003-07-02 23:26:47.000000000 -0500 ++++ samba-3.0.20b/source/registry/reg_db.c 2003-07-02 23:19:02.000000000 -0500 +@@ -198,13 +198,13 @@ + if ( tdb_reg ) + return True; + +- if ( !(tdb_reg = tdb_open_log(lock_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600)) ) ++ if ( !(tdb_reg = tdb_open_log(state_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600)) ) + { - tdb_reg = tdb_open_log(lock_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); + tdb_reg = tdb_open_log(state_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600); - if ( !tdb_reg ) { - DEBUG(0,("init_registry: Failed to open registry %s (%s)\n", + if ( !tdb_reg ) { + DEBUG(0,("init_registry: Failed to open registry %s (%s)\n", - lock_path("registry.tdb"), strerror(errno) )); + state_path("registry.tdb"), strerror(errno) )); - return False; - } - + return False; + } + + DEBUG(10,("init_registry: Successfully created registry tdb\n")); diff -uNr samba-3.0.0beta2.orig/source/rpc_server/srv_srvsvc_nt.c samba-3.0.0beta2/source/rpc_server/srv_srvsvc_nt.c --- samba-3.0.0beta2.orig/source/rpc_server/srv_srvsvc_nt.c 2003-07-02 23:26:47.000000000 -0500 +++ samba-3.0.0beta2/source/rpc_server/srv_srvsvc_nt.c 2003-07-02 23:19:02.000000000 -0500 diff --git a/packaging/Debian/debian-stable/patches/installswat.sh.patch b/packaging/Debian/debian-woody/patches/installswat.sh.patch index 8bd120257e..8bd120257e 100644 --- a/packaging/Debian/debian-stable/patches/installswat.sh.patch +++ b/packaging/Debian/debian-woody/patches/installswat.sh.patch diff --git a/packaging/Debian/debian-woody/patches/nmbd-signalling.patch b/packaging/Debian/debian-woody/patches/nmbd-signalling.patch new file mode 100644 index 0000000000..ca04cce3bf --- /dev/null +++ b/packaging/Debian/debian-woody/patches/nmbd-signalling.patch @@ -0,0 +1,20 @@ +diff -uNr samba-2.999+3.0.alpha21.orig/source/nmbd/nmbd_subnetdb.c samba-2.999+3.0.alpha21/source/nmbd/nmbd_subnetdb.c +--- samba-2.999+3.0.alpha21.orig/source/nmbd/nmbd_subnetdb.c 2002-11-26 20:54:19.000000000 -0600 ++++ samba-2.999+3.0.alpha21/source/nmbd/nmbd_subnetdb.c 2002-12-16 23:34:13.000000000 -0600 +@@ -214,12 +214,16 @@ + extern struct in_addr loopback_ip; + + if(num_interfaces == 0) { ++ void (*old_handler)(int); ++ + DEBUG(0,("create_subnets: No local interfaces !\n")); + DEBUG(0,("create_subnets: Waiting for an interface to appear ...\n")); ++ old_handler = CatchSignal( SIGTERM, SIGNAL_CAST SIG_DFL ); + while (iface_count() == 0) { + sleep(5); + load_interfaces(); + } ++ CatchSignal( SIGTERM, SIGNAL_CAST old_handler ); + } + + num_interfaces = iface_count(); diff --git a/packaging/Debian/debian-stable/patches/samba.patch b/packaging/Debian/debian-woody/patches/samba.patch index dd1303ad90..dd1303ad90 100644 --- a/packaging/Debian/debian-stable/patches/samba.patch +++ b/packaging/Debian/debian-woody/patches/samba.patch diff --git a/packaging/Debian/debian-woody/patches/smbclient-pager.patch b/packaging/Debian/debian-woody/patches/smbclient-pager.patch new file mode 100644 index 0000000000..3ee85d4118 --- /dev/null +++ b/packaging/Debian/debian-woody/patches/smbclient-pager.patch @@ -0,0 +1,12 @@ +diff -uNr samba-2.999+3.0cvs20020906.orig/source/include/local.h samba-2.999+3.0cvs20020906/source/include/local.h +--- samba-2.999+3.0cvs20020906.orig/source/include/local.h 2002-09-04 14:13:06.000000000 -0500 ++++ samba-2.999+3.0cvs20020906/source/include/local.h 2002-09-08 14:19:24.000000000 -0500 +@@ -109,7 +109,7 @@ + /* the default pager to use for the client "more" command. Users can + override this with the PAGER environment variable */ + #ifndef PAGER +-#define PAGER "more" ++#define PAGER "/usr/bin/pager" + #endif + + /* the size of the uid cache used to reduce valid user checks */ diff --git a/packaging/Debian/debian-woody/patches/smbclient-tar.patch.unused b/packaging/Debian/debian-woody/patches/smbclient-tar.patch.unused new file mode 100644 index 0000000000..e2a4c3ce2c --- /dev/null +++ b/packaging/Debian/debian-woody/patches/smbclient-tar.patch.unused @@ -0,0 +1,43 @@ +diff -uNr samba-3.0.0beta2.orig/source/client/client.c samba-3.0.0beta2/source/client/client.c +--- samba-3.0.0beta2.orig/source/client/client.c 2003-07-01 22:36:24.000000000 -0500 ++++ samba-3.0.0beta2/source/client/client.c 2003-07-06 15:17:36.000000000 -0500 +@@ -2773,6 +2773,7 @@ + int opt; + pstring query_host; + BOOL message = False; ++ char* tar_args = NULL; + extern char tar_type; + pstring term_code; + static const char *new_name_resolve_order = NULL; +@@ -2816,7 +2817,7 @@ + max_protocol = interpret_protocol(poptGetOptArg(pc), max_protocol); + break; + case 'T': +- if (!tar_parseargs(argc, argv, poptGetOptArg(pc), optind)) { ++ if (!(tar_args = poptGetOptArg(pc))) { + poptPrintUsage(pc, stderr, 0); + exit(1); + } +@@ -2917,6 +2917,22 @@ + pstrcpy(cmdline_auth_info.password,poptGetArg(pc)); + } + ++ /* The tar command may take a number of string options; pass ++ everything we have left to tar_parseargs(). */ ++ if (tar_args) { ++ const char **argv2 = poptGetArgs(pc); ++ int argc2 = 0; ++ ++ if (argv2) { ++ while (argv2[argc2]) argc2++; ++ } ++ ++ if (!tar_parseargs(argc2, argv2, tar_args, 0)) { ++ poptPrintUsage(pc, stderr, 0); ++ exit(1); ++ } ++ } ++ + init_names(); + + if(new_name_resolve_order) diff --git a/packaging/Debian/debian-woody/patches/smbmount-mtab-flags.patch b/packaging/Debian/debian-woody/patches/smbmount-mtab-flags.patch new file mode 100644 index 0000000000..dac999dd63 --- /dev/null +++ b/packaging/Debian/debian-woody/patches/smbmount-mtab-flags.patch @@ -0,0 +1,15 @@ +diff -ur samba-2.2.4.orig/source/client/smbmnt.c samba-2.2.4/source/client/smbmnt.c +--- samba-2.2.4.orig/source/client/smbmnt.c Sun Apr 8 15:22:51 2001 ++++ samba-2.2.4/source/client/smbmnt.c Sun May 5 16:42:29 2002 +@@ -259,7 +259,10 @@ + ment.mnt_fsname = share_name ? share_name : "none"; + ment.mnt_dir = mount_point; + ment.mnt_type = "smbfs"; +- ment.mnt_opts = ""; ++ if (mount_ro) ++ ment.mnt_opts = "ro"; ++ else ++ ment.mnt_opts = "rw"; + ment.mnt_freq = 0; + ment.mnt_passno= 0; + diff --git a/packaging/Debian/debian-stable/patches/smbmount-nomtab.patch b/packaging/Debian/debian-woody/patches/smbmount-nomtab.patch index 8807148170..8807148170 100644 --- a/packaging/Debian/debian-stable/patches/smbmount-nomtab.patch +++ b/packaging/Debian/debian-woody/patches/smbmount-nomtab.patch diff --git a/packaging/Debian/debian-stable/patches/smbstatus-locking.patch b/packaging/Debian/debian-woody/patches/smbstatus-locking.patch index d37896a369..d37896a369 100644 --- a/packaging/Debian/debian-stable/patches/smbstatus-locking.patch +++ b/packaging/Debian/debian-woody/patches/smbstatus-locking.patch diff --git a/packaging/Debian/debian-woody/patches/version-fix-vscan.patch b/packaging/Debian/debian-woody/patches/version-fix-vscan.patch new file mode 100644 index 0000000000..0f35598297 --- /dev/null +++ b/packaging/Debian/debian-woody/patches/version-fix-vscan.patch @@ -0,0 +1,37 @@ +Author: Lars Mueller <lmuelle at SuSE dot de> +Subject: Non integer SAMBA_VERSION_RELEASE breaks samba-vscan build +Bugzilla: bugzilla.Samba.org #2618 + +--- samba-3.0.20b/source/script/mkversion.sh ++++ samba-3.0.20b/source/script/mkversion.sh 2005-10-22 12:56:30 +@@ -17,6 +17,7 @@ + SAMBA_VERSION_MAJOR=`sed -n 's/^SAMBA_VERSION_MAJOR=//p' $SOURCE_DIR$VERSION_FILE` + SAMBA_VERSION_MINOR=`sed -n 's/^SAMBA_VERSION_MINOR=//p' $SOURCE_DIR$VERSION_FILE` + SAMBA_VERSION_RELEASE=`sed -n 's/^SAMBA_VERSION_RELEASE=//p' $SOURCE_DIR$VERSION_FILE` ++SAMBA_VERSION_RELEASE_SUFFIX=`sed -n 's/^SAMBA_VERSION_RELEASE_SUFFIX=//p' $SOURCE_DIR$VERSION_FILE` + + SAMBA_VERSION_PRE_RELEASE=`sed -n 's/^SAMBA_VERSION_PRE_RELEASE=//p' $SOURCE_DIR$VERSION_FILE` + +@@ -31,9 +32,10 @@ + echo "#define SAMBA_VERSION_MAJOR ${SAMBA_VERSION_MAJOR}" >> $OUTPUT_FILE + echo "#define SAMBA_VERSION_MINOR ${SAMBA_VERSION_MINOR}" >> $OUTPUT_FILE + echo "#define SAMBA_VERSION_RELEASE ${SAMBA_VERSION_RELEASE}" >> $OUTPUT_FILE ++echo "#define SAMBA_VERSION_RELEASE_SUFFIX ${SAMBA_VERSION_RELEASE_SUFFIX}" >> $OUTPUT_FILE + + +-SAMBA_VERSION_STRING="${SAMBA_VERSION_MAJOR}.${SAMBA_VERSION_MINOR}.${SAMBA_VERSION_RELEASE}" ++SAMBA_VERSION_STRING="${SAMBA_VERSION_MAJOR}.${SAMBA_VERSION_MINOR}.${SAMBA_VERSION_RELEASE}${SAMBA_VERSION_RELEASE_SUFFIX}" + + + if test -n "${SAMBA_VERSION_PRE_RELEASE}";then +--- samba-3.0.20b/source/VERSION ++++ samba-3.0.20b/source/VERSION 2005-10-22 12:56:30 +@@ -19,7 +19,8 @@ + ######################################################## + SAMBA_VERSION_MAJOR=3 + SAMBA_VERSION_MINOR=0 + SAMBA_VERSION_RELEASE=20 ++SAMBA_VERSION_RELEASE_SUFFIX=b + + ######################################################## + # For 'pre' releases the version will be # diff --git a/packaging/Debian/debian-woody/po/POTFILES.in b/packaging/Debian/debian-woody/po/POTFILES.in new file mode 100644 index 0000000000..95a7ea8150 --- /dev/null +++ b/packaging/Debian/debian-woody/po/POTFILES.in @@ -0,0 +1,3 @@ +[type: gettext/rfc822deb] samba-common.templates +[type: gettext/rfc822deb] samba.templates +[type: gettext/rfc822deb] swat.templates diff --git a/packaging/Debian/debian-woody/po/es.po b/packaging/Debian/debian-woody/po/es.po new file mode 100644 index 0000000000..0d1d1a770d --- /dev/null +++ b/packaging/Debian/debian-woody/po/es.po @@ -0,0 +1,298 @@ +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# +# Developers do not need to manually edit POT or PO files. +# +msgid "" +msgstr "" +"Project-Id-Version: Samba for Debian 3.0.0beta2-1\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2003-08-30 19:08-0500\n" +"PO-Revision-Date: 2003-07-02 21:51-0500\n" +"Last-Translator: Steve Langasek <vorlon@debian.org>\n" +"Language-Team: Spanish <debian-l10n-spanish@lists.debian.org>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Description +#: ../samba-common.templates:3 +msgid "Character Set for Unix filesystem" +msgstr "Juego de caracteres para el sistema de ficheros Unix" + +# +#. Description +#: ../samba-common.templates:3 +msgid "" +"You currently have a \"character set\" configured in your smb.conf. In " +"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " +"specify the character set you wish to use for theis new option, which " +"controls how Samba interprets filenames on the file system." +msgstr "" +"Actualmente hay una opción de \"character set\" en smb.conf. En Samba 3.0 " +"esta opción ha sido reemplazado por una opción nueva: \"unix charset\". Por " +"favor, indique el juego de caracteres que desea usar para esta opción nueva, " +"que controla cómo Samba interpretará los nombres en el sistema de ficheros." + +#. Description +#: ../samba-common.templates:3 +msgid "If you leave this option blank, your smb.conf will not be changed." +msgstr "Si deja en blanco este campo, no se cambiará smb.conf." + +#. Description +#: ../samba-common.templates:13 +msgid "Character Set for DOS clients" +msgstr "Juego de caracteres para los clientes DOS" + +#. Description +#: ../samba-common.templates:13 +msgid "" +"You currently have a \"client code page\" set in your smb.conf. In Samba " +"3.0, this option is replaced by the option \"dos charset\". Please specify " +"the character set you wish to use for this new option. In most cases, the " +"default chosen for you will be sufficient. Note that this option is not " +"needed to support Windows clients, it is only for DOS clients. If you leave " +"this option blank, your smb.conf will not be changed." +msgstr "" +"Actualmente hay una opción de \"client code page\" en smb.conf. En Samba " +"3.0 esta opción ha sido reemplazado por la opción \"dos charset\". Por " +"favor, indique el juego de caracteres que desea usar para esta opción " +"nueva. Esta opción no se necesita en absoluto para clientes Windows; es " +"exclusivamente para los clientes DOS. Si deja en blanco este campo, no se " +"cambiará smb.conf." + +#. Description +#: ../samba-common.templates:24 +msgid "Modify smb.conf to use WINS settings from DHCP?" +msgstr "" +"¿Modificar smb.conf para usar la configuración WINS que proviene de DHCP?" + +#. Description +#: ../samba-common.templates:24 +msgid "" +"If your computer gets IP address information from a DHCP server on the " +"network, the DHCP server may also provide information about WINS servers " +"(\"NetBIOS name servers\") present on the network. This requires a change " +"to your smb.conf file so that DHCP-provided WINS settings will automatically " +"be read from /etc/samba/dhcp.conf." +msgstr "" +"Si su sistema recibe la dirección IP desde un servidor DHCP en la red, el " +"servidor DHCP también puede proveerle informaciones sobre los servidores de " +"WINS que haya en la red. Esto requiere un cambio en el fichero smb.conf " +"para que la configuración de WINS proveniente de DHCP se lea automaticamente " +"de /etc/samba/dhcp.conf." + +#. Description +#: ../samba-common.templates:24 +msgid "" +"You must have the dhcp3-client package installed to take advantage of this " +"feature." +msgstr "" +"Hay que instalar el paquete dhcp3-client para aprovechar esta funcionalidad." + +#. Description +#: ../samba-common.templates:37 +msgid "Configure smb.conf through debconf?" +msgstr "¿Configurar smb.conf mediante debconf?" + +#. Description +#: ../samba-common.templates:37 +msgid "" +"The rest of the configuration of Samba deals with questions that affect " +"parameters in /etc/samba/smb.conf, which is the file used to configure the " +"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " +"line or an option that spans multiple lines, which could confuse debconf and " +"require you to edit your smb.conf by hand to get it working again." +msgstr "" +"El resto de la configuración de Samba trata sobre cuestiones que afectan al " +"contenido de /etc/samba/smb.conf, que es el fichero utilizado para " +"configurar los programas de Samba (nmbd y smbd). Su smb.conf actual contiene " +"una lÃnea 'include' o una opción que atraviesa más de una lÃnea, asà que " +"debconf puede dejarlo con un smb.conf descompuesto, requiriendo que lo " +"arregle a mano." + +#. Description +#: ../samba-common.templates:37 +msgid "" +"If you don't use debconf to configure smb.conf, you will have to handle any " +"configuration changes yourself, and will not be able to take advantage of " +"periodic configuration enhancements. Therefore, use of debconf is " +"recommended if possible." +msgstr "" +"Si no usa debconf para configurar smb.conf, tendrá que cuidar a mano " +"cualquier cambio a la configuración de Samba y no disfrutará de aumentos " +"periódicos de configuración. Por eso se recomienda el uso de debconf cuando " +"sea posible." + +#. Description +#: ../samba-common.templates:52 +msgid "Workgroup/Domain Name?" +msgstr "Nombre del dominio o del grupo de trabajo" + +#. Description +#: ../samba-common.templates:52 +msgid "" +"This controls what workgroup your server will appear to be in when queried " +"by clients. Note that this parameter also controls the Domain name used with " +"the security=domain setting." +msgstr "" +"Es el grupo de trabajo en el que aparecerá su servidor cuando se lo " +"pregunten los clientes de la red. Este parámetro también controla el nombre " +"de dominio que se usa con la configuración security=domain." + +#. Description +#: ../samba-common.templates:60 +msgid "Use password encryption?" +msgstr "¿Utilizar contraseñas cifradas?" + +#. Description +#: ../samba-common.templates:60 +msgid "" +"Recent Windows clients communicate with SMB servers using encrypted " +"passwords. If you want to use clear text passwords you will need to change a " +"parameter in your Windows registry. It is recommended that you use encrypted " +"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " +"and that you set passwords in there for each user using the smbpasswd " +"command." +msgstr "" +"Los clientes Windows más modernos se comunican con los servidores SMB " +"utilizando contraseñas cifradas. Si quiere usar contraseñas en texto plano, " +"tendrá que cambiar un parámetro en el registro de Windows. Es muy " +"recomendable usar cifrado en las contraseñas. Si elige hacerlo, compruebe " +"que tiene un fichero /etc/samba/smbpasswd válido y que ha puesto las " +"contraseñas con el programa smbpasswd." + +#. Description +#: ../samba.templates:4 +msgid "Create samba password database, /var/lib/samba/passdb.tdb?" +msgstr "¿Crear el base de dados de contraseñas /var/lib/samba/passdb.tdb?" + +#. Description +#: ../samba.templates:4 +msgid "" +"To be compatible with the defaults in most versions of Windows, Samba must " +"be configured to use encrypted passwords. This requires user passwords to " +"be stored in a file separate from /etc/passwd. This file can be created " +"automatically, but the passwords must be added manually (by you or the user) " +"by running smbpasswd, and you must arrange to keep it up-to-date in the " +"future. If you do not create it, you will have to reconfigure samba (and " +"probably your client machines) to use plaintext passwords. See /usr/share/" +"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " +"details." +msgstr "" +"Para manterner la compatibilidad con el comportamiento por defecto de la " +"mayoria de los sistemas Windows, hay que configurar Samba para que use " +"contraseñas cifradas, lo cual requiere la creación de un fichero, distinto " +"del /etc/passwd, donde se guarden las contraseñas de los usuarios. El " +"fichero se puede crear automaticamente, aunque es necesario añadir las " +"contraseñas manualmente (por usted o por el usuario) mediante el programa " +"'smbpasswd', y debe encargarse de mantener las contraseñas al dÃa. Si no " +"crea este fichero, es imprescindible configurar Samba (y posiblemente los " +"sistemas Windows) para que use contraseñas no cifradas. Véa /usr/share/doc/" +"samba-doc/htmldocs/ENCRYPTION.html del paquete samba-doc para más " +"información." + +#. Description +#: ../samba.templates:17 +msgid "Samba's log files have moved." +msgstr "Se han cambiado de lugar los ficheros de registro de Samba." + +#. Description +#: ../samba.templates:17 +msgid "" +"Starting with the first packages of Samba 2.2 for Debian the log files for " +"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " +"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." +msgstr "" +"A partir de los primeros paquetes Debian de Samba 2.2, los ficheros de " +"registro de los dos demonios del Samba (nmbd y smbd) se encuentran en /var/" +"log/samba/. Los nombres de estos ficheros son log.nmbd y log.smbd, para " +"nmbd y smbd respectivamente." + +#. Description +#: ../samba.templates:17 +msgid "" +"The old log files that were in /var/log/ will be moved to the new location " +"for you." +msgstr "" +"Los ficheros de registro antiguos que habÃa en /var/log se moverán " +"automáticamente a su nueva ubicación." + +#. Description +#: ../samba.templates:28 +msgid "Running nmbd from inetd is no longer supported" +msgstr "Ya no se puede ejecutar nmbd desde el inetd" + +#. Description +#: ../samba.templates:28 +msgid "" +"Your system was previously configured to start nmbd and smbd from inetd. As " +"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " +"If you have modified your /etc/init.d/samba startup script, you may need to " +"adjust it by hand now so that nmbd will start." +msgstr "" +"Su sistema estaba configurado anteriormente para ejectuar nmbd y smbd desde " +"inetd. A partir de la version 2.999+3.0.alpha20-4, nmbd ya no se ejecuta " +"desde inetd. Si ha modificado el script de arranque /etc/init.d/samba, " +"puede que tenga que editarlo ahora para que nmbd se ejecute." + +#. Choices +#: ../samba.templates:36 +msgid "daemons, inetd" +msgstr "demonios, inetd" + +#. Description +#: ../samba.templates:38 +msgid "How do you want to run Samba?" +msgstr "¿Cómo quiere que se ejecute Samba?" + +#. Description +#: ../samba.templates:38 +msgid "" +"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " +"daemon is the recommended approach." +msgstr "" +"El servicio Samba smbd puede ejecutarse como demonio normal o desde el " +"inetd. Se recomienda que se ejecute como demonio independiente." + +#. Description +#: ../samba.templates:45 +msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" +msgstr "" +"¿Convertir el fichero /etc/samba/smbpasswd en /var/lib/samba/passdb.tdb?" + +#. Description +#: ../samba.templates:45 +#, fuzzy +msgid "" +"Samba 3.0 introduces a newer, more complete SAM database interface which " +"supersedes the /etc/samba/smbpasswd file. Would you like your existing " +"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " +"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " +"here." +msgstr "" +"La versión 3.0 de Samba introduce un nuevo base de dados \"SAM\" más " +"completo que suplanta al fichero /etc/samba/smbpasswd. ¿Quiere que el " +"fichero corriente smbpasswd sea convertido en /var/lib/samba/passdb.tdb? Si " +"pretende usar otro " + +#. Description +#: ../swat.templates:3 +msgid "Your smb.conf will be re-written!" +msgstr "¡Se sobrescribirá su configuración smb.conf!" + +#. Description +#: ../swat.templates:3 +msgid "" +"SWAT will rewrite your smb.conf file. It will rearrange the entries and " +"delete all comments, include= and copy= options. If you have a carefully " +"crafted smb.conf then back it up or don't use SWAT!" +msgstr "" diff --git a/packaging/Debian/debian-woody/po/fr.po b/packaging/Debian/debian-woody/po/fr.po new file mode 100644 index 0000000000..6be14c19b4 --- /dev/null +++ b/packaging/Debian/debian-woody/po/fr.po @@ -0,0 +1,301 @@ +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# +# Developers do not need to manually edit POT or PO files. +# +msgid "" +msgstr "" +"Project-Id-Version: Samba for Debian 3.0.0beta2-1\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2003-08-30 19:08-0500\n" +"PO-Revision-Date: 2003-07-02 21:52-0500\n" +"Last-Translator: Steve Langasek <vorlon@debian.org>\n" +"Language-Team: French <debian-l10n-french@lists.debian.org>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=ISO-8859-15\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Description +#: ../samba-common.templates:3 +msgid "Character Set for Unix filesystem" +msgstr "Jeu de caractères pour les systèmes de fichiers Unix" + +#. Description +#: ../samba-common.templates:3 +msgid "" +"You currently have a \"character set\" configured in your smb.conf. In " +"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " +"specify the character set you wish to use for theis new option, which " +"controls how Samba interprets filenames on the file system." +msgstr "" +"Une instruction « character set » (jeu de caractères) est utilisée dans " +"votre fichier smb.conf. Avec Samba 3.0, cette option est remplacée par une " +"nouvelle option, « unix charset » (jeu de caractères Unix). Veuillez " +"indiquer le jeu de caractères que vous voulez utiliser avec cette option, " +"qui permet d'interpréter les noms de fichiers sur le système." + +#. Description +#: ../samba-common.templates:3 +msgid "If you leave this option blank, your smb.conf will not be changed." +msgstr "" +"Le fichier smb.conf ne sera pas modifié si vous laissez cette option sans " +"réponse." + +#. Description +#: ../samba-common.templates:13 +msgid "Character Set for DOS clients" +msgstr "Jeu de caractères pour les clients DOS" + +#. Description +#: ../samba-common.templates:13 +msgid "" +"You currently have a \"client code page\" set in your smb.conf. In Samba " +"3.0, this option is replaced by the option \"dos charset\". Please specify " +"the character set you wish to use for this new option. In most cases, the " +"default chosen for you will be sufficient. Note that this option is not " +"needed to support Windows clients, it is only for DOS clients. If you leave " +"this option blank, your smb.conf will not be changed." +msgstr "" +"Votre fichier smb.conf contient une option « client code page » (page de " +"codes du client). Avec Samba 3.0, cette option a été remplacée par l'option " +"« dos charset » (jeu de caractères DOS). Veuillez indiquer le jeu de " +"caractères que vous voulez utiliser avec la nouvelle option. En général le " +"jeu de caractères choisi par défaut est suffisant. Veuillez noter que cette " +"option ne sert pas pour les clients Windows mais seulement pour les clients " +"DOS. Le fichier smb.conf ne sera pas modifié si vous laissez cette option " +"sans réponse. " + +#. Description +#: ../samba-common.templates:24 +msgid "Modify smb.conf to use WINS settings from DHCP?" +msgstr "Modifier smb.conf pour utiliser les paramètres WINS fournis par DHCP ?" + +#. Description +#: ../samba-common.templates:24 +msgid "" +"If your computer gets IP address information from a DHCP server on the " +"network, the DHCP server may also provide information about WINS servers " +"(\"NetBIOS name servers\") present on the network. This requires a change " +"to your smb.conf file so that DHCP-provided WINS settings will automatically " +"be read from /etc/samba/dhcp.conf." +msgstr "" +"Si votre ordinateur obtient ses paramètres IP à partir d'un serveur DHCP du " +"réseau, ce serveur peut aussi fournir des informations sur les serveurs WINS " +"(serveurs de noms NetBIOS) présents sur le réseau. Une modification du " +"fichier smb.conf est nécessaire afin que les réglages WINS fournis par le " +"serveur DHCP soient lus dans /etc/samba/dhcp.conf." + +#. Description +#: ../samba-common.templates:24 +msgid "" +"You must have the dhcp3-client package installed to take advantage of this " +"feature." +msgstr "Pour cela, le paquet dhcp3-client doit être installé." + +#. Description +#: ../samba-common.templates:37 +msgid "Configure smb.conf through debconf?" +msgstr "Voulez-vous configurer smb.conf avec debconf ?" + +#. Description +#: ../samba-common.templates:37 +msgid "" +"The rest of the configuration of Samba deals with questions that affect " +"parameters in /etc/samba/smb.conf, which is the file used to configure the " +"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " +"line or an option that spans multiple lines, which could confuse debconf and " +"require you to edit your smb.conf by hand to get it working again." +msgstr "" +"La suite de la configuration de Samba pose des questions sur des paramètres " +"de /etc/samba/smb.conf, le fichier utilisé pour configurer les programmes de " +"Samba (nmbd et smbd). Votre fichier actuel contient une ligne « include » ou " +"une option qui s'étale sur plusieurs lignes : cela peut perturber debconf et " +"il vaut mieux gérer manuellement le contenu de ce fichier." + +#. Description +#: ../samba-common.templates:37 +msgid "" +"If you don't use debconf to configure smb.conf, you will have to handle any " +"configuration changes yourself, and will not be able to take advantage of " +"periodic configuration enhancements. Therefore, use of debconf is " +"recommended if possible." +msgstr "" +"Si vous n'utilisez pas debconf pour configurer smb.conf, vous devrez vous-" +"même gérer les modifications de configuration et vous ne pourrez pas " +"bénéficier des améliorations faites dans la configuration. Si possible, il " +"est conseillé d'utiliser debconf." + +#. Description +#: ../samba-common.templates:52 +msgid "Workgroup/Domain Name?" +msgstr "Groupe de travail et nom de domaine ?" + +#. Description +#: ../samba-common.templates:52 +msgid "" +"This controls what workgroup your server will appear to be in when queried " +"by clients. Note that this parameter also controls the Domain name used with " +"the security=domain setting." +msgstr "" +"Ce paramètre indique le groupe de travail où les clients trouveront le " +"serveur. Il indique aussi le nom de domaine utilisé par le paramètre " +"« security=domain »." + +#. Description +#: ../samba-common.templates:60 +msgid "Use password encryption?" +msgstr "Voulez-vous chiffrer les mots de passe ?" + +#. Description +#: ../samba-common.templates:60 +msgid "" +"Recent Windows clients communicate with SMB servers using encrypted " +"passwords. If you want to use clear text passwords you will need to change a " +"parameter in your Windows registry. It is recommended that you use encrypted " +"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " +"and that you set passwords in there for each user using the smbpasswd " +"command." +msgstr "" +"Des clients Windows récents communiquent avec les serveurs SMB en utilisant " +"des mots de passe chiffrés. Si vous voulez utiliser des mots de passe sans " +"chiffrement, vous devez modifier un paramètre dans le registre de Windows. " +"Il est recommandé d'utiliser des mots de passe chiffrés. Si vous le faites, " +"n'oubliez pas de créer un fichier /etc/samba/smbpasswd et d'y mettre les " +"mots de passe de tous les utilisateurs qui se servent de la commande " +"smbpasswd." + +#. Description +#: ../samba.templates:4 +msgid "Create samba password database, /var/lib/samba/passdb.tdb?" +msgstr "Faut-il créer une base de données /var/lib/samba/passdb.tdb ?" + +#. Description +#: ../samba.templates:4 +msgid "" +"To be compatible with the defaults in most versions of Windows, Samba must " +"be configured to use encrypted passwords. This requires user passwords to " +"be stored in a file separate from /etc/passwd. This file can be created " +"automatically, but the passwords must be added manually (by you or the user) " +"by running smbpasswd, and you must arrange to keep it up-to-date in the " +"future. If you do not create it, you will have to reconfigure samba (and " +"probably your client machines) to use plaintext passwords. See /usr/share/" +"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " +"details." +msgstr "" +"Pour préserver la compatibilité avec le comportement par défaut de la " +"plupart des systèmes Windows, Samba doit utiliser les mots de passe " +"chiffrés. Cela exige la création d'un fichier, distinct du fichier /etc/" +"passwd, pour mettre les mots de passe des utilisateurs. Ce fichier peut être " +"créé automatiquement, mais quelqu'un (vous ou l'utilisateur) devra ajouter " +"les mots de passe manuellement en utilisant la commande smbpasswd ; et vous " +"devrez maintenir à jour ce fichier. Si vous ne voulez pas créer le fichier " +"maintenant, Samba (et peut-être les ordinateurs Windows) devra utiliser des " +"mots de passe non chiffrés. Voyez /usr/share/doc/samba-doc/htmldocs/" +"ENCRYPTION.html dans le paquet samba-doc pour plus de détails." + +#. Description +#: ../samba.templates:17 +msgid "Samba's log files have moved." +msgstr "Les fichiers-journaux de Samba ont changé de place." + +#. Description +#: ../samba.templates:17 +msgid "" +"Starting with the first packages of Samba 2.2 for Debian the log files for " +"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " +"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." +msgstr "" +"À partir des premiers paquets de Samba 2.2 pour Debian, les fichiers-" +"journaux des démons nmbd et smbd se trouvent dans /var/log/samba/. Les noms " +"de ces fichiers sont log.nmbd et log.smbd pour, respectivement, nmbd et smbd." + +#. Description +#: ../samba.templates:17 +msgid "" +"The old log files that were in /var/log/ will be moved to the new location " +"for you." +msgstr "" +"Les anciens fichiers-journaux dans /var/log/ seront mis au bon endroit." + +#. Description +#: ../samba.templates:28 +msgid "Running nmbd from inetd is no longer supported" +msgstr "L'utilisation de nmbd à partir d'inetd n'est plus supportée" + +#. Description +#: ../samba.templates:28 +msgid "" +"Your system was previously configured to start nmbd and smbd from inetd. As " +"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " +"If you have modified your /etc/init.d/samba startup script, you may need to " +"adjust it by hand now so that nmbd will start." +msgstr "" +"Votre système lançait nmbd et smbd à partir d'inetd. Depuis la version 2.999" +"+3.0.alpha20-4, on ne peut plus exécuter nmbd à partir d'inetd. Si vous avez " +"modifié le script de lancement /etc/init.d/samba, vous avez peut-être besoin " +"de le corriger manuellement pour permettre le lancement de nmbd. " + +#. Choices +#: ../samba.templates:36 +msgid "daemons, inetd" +msgstr "démons, inetd" + +#. Description +#: ../samba.templates:38 +msgid "How do you want to run Samba?" +msgstr "Comment voulez-vous lancer Samba ?" + +#. Description +#: ../samba.templates:38 +msgid "" +"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " +"daemon is the recommended approach." +msgstr "" +"Le service de Samba smbd peut s'exécuter en tant que démon classique ou bien " +"être lancé par inetd. L'approche recommandée est qu'il s'exécute en tant que " +"démon." + +#. Description +#: ../samba.templates:45 +msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" +msgstr "Faut-il convertir /etc/samba/smbpasswd en /var/lib/samba/passdb.tdb ?" + +#. Description +#: ../samba.templates:45 +msgid "" +"Samba 3.0 introduces a newer, more complete SAM database interface which " +"supersedes the /etc/samba/smbpasswd file. Would you like your existing " +"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " +"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " +"here." +msgstr "" +"Avec Samba 3.0, une nouvelle interface pour les bases de données SAM, plus " +"complète, vient remplacer le fichier /etc/samba/smbpasswd. Voulez-vous que " +"votre fichier existant soit remplacé par /var/lib/samba/passdb.tdb ? Si vous " +"envisagez d'utiliser une autre interface d'authentification (p.ex. LDAP), " +"refusez la proposition maintenant." + +#. Description +#: ../swat.templates:3 +msgid "Your smb.conf will be re-written!" +msgstr "Ré-écriture de votre fichier smb.conf !" + +#. Description +#: ../swat.templates:3 +msgid "" +"SWAT will rewrite your smb.conf file. It will rearrange the entries and " +"delete all comments, include= and copy= options. If you have a carefully " +"crafted smb.conf then back it up or don't use SWAT!" +msgstr "" +"SWAT va modifier votre fichier smb.conf. Les entrées seront réorganisées et " +"les commentaires détruits ainsi que les entrées « include = » et « copy = ». " +"Si votre smb.conf était soigneusement construit, sauvegardez-le ou " +"n'utilisez pas SWAT !" diff --git a/packaging/Debian/debian-woody/po/nl.po b/packaging/Debian/debian-woody/po/nl.po new file mode 100644 index 0000000000..61e8742dbb --- /dev/null +++ b/packaging/Debian/debian-woody/po/nl.po @@ -0,0 +1,302 @@ +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# +# Developers do not need to manually edit POT or PO files. +# +msgid "" +msgstr "" +"Project-Id-Version: samba\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2003-08-30 19:08-0500\n" +"PO-Revision-Date: 2003-08-30 02:03+0100\n" +"Last-Translator: Bart Cornelis <cobaco@linux.be>\n" +"Language-Team: dutch <debian-l10n-dutch@lists.debian.org>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=iso-8859-1\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Description +#: ../samba-common.templates:3 +msgid "Character Set for Unix filesystem" +msgstr "Karakterset voor Unix bestandsysteem" + +#. Description +#: ../samba-common.templates:3 +msgid "" +"You currently have a \"character set\" configured in your smb.conf. In " +"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " +"specify the character set you wish to use for theis new option, which " +"controls how Samba interprets filenames on the file system." +msgstr "" +"U heeft momenteel een \"karakterset\" ingesteld in uw smb.conf. In Samba 3.0 " +"werd deze optie vervangen door een nieuwe \"unix karakterset\" optie. " +"Gelieve de karakterset die u voor deze nieuwe optie wil gebruiken aan te " +"geven, deze bepaald hoe Samba de bestandsnamen in het bestandsysteem " +"interpreteerd." + +#. Description +#: ../samba-common.templates:3 +msgid "If you leave this option blank, your smb.conf will not be changed." +msgstr "" +"Uw smb.conf bestand wordt niet aangepast indien u deze optie leeg laat." + +#. Description +#: ../samba-common.templates:13 +msgid "Character Set for DOS clients" +msgstr "Karakterset voor DOS-clients" + +#. Description +#: ../samba-common.templates:13 +msgid "" +"You currently have a \"client code page\" set in your smb.conf. In Samba " +"3.0, this option is replaced by the option \"dos charset\". Please specify " +"the character set you wish to use for this new option. In most cases, the " +"default chosen for you will be sufficient. Note that this option is not " +"needed to support Windows clients, it is only for DOS clients. If you leave " +"this option blank, your smb.conf will not be changed." +msgstr "" +"U heeft momenteel een \"client code pagina\" ingesteld in uw smb.conf. In " +"Samba 3.0 werd deze optie vervangen door de optie \"dos karakterset\". " +"Gelieve de karakterset die u voor deze nieuwe optie wilt gebruiken aan te " +"geven. In de meeste gevallen zal het standaard ingevulde antwoord voldoen. " +"Merk op dat deze optie niet nodig is voor ondersteuning van Windows-clients, " +"enkel voor DOS-clients. Uw smb.conf wordt niet veranderd wanneer u deze " +"optie blank laat." + +#. Description +#: ../samba-common.templates:24 +msgid "Modify smb.conf to use WINS settings from DHCP?" +msgstr "smb.conf aanpassen om de WINS instellingen van DHCP te gebruiken?" + +#. Description +#: ../samba-common.templates:24 +msgid "" +"If your computer gets IP address information from a DHCP server on the " +"network, the DHCP server may also provide information about WINS servers " +"(\"NetBIOS name servers\") present on the network. This requires a change " +"to your smb.conf file so that DHCP-provided WINS settings will automatically " +"be read from /etc/samba/dhcp.conf." +msgstr "" +"Indien uw computer zijn ip-addres informatie van een DHCP-server op het " +"netwerk haalt, voorziet deze mogelijks ook informatie betreffende de op het " +"netwerk aanwezige WINS-servers (\"NetBIOS naam servers\").\" Dit vereist een " +"verandering aan uw smb.conf bestand, opdat de door DHCP doorgegeven WINS " +"instellingen automatisch gelezen worden van /etc/samba/dhcp.conf." + +#. Description +#: ../samba-common.templates:24 +msgid "" +"You must have the dhcp3-client package installed to take advantage of this " +"feature." +msgstr "" +"U dient het dhcp3-client-pakket geïnstalleert te hebben om van deze optie " +"gebruik te maken." + +#. Description +#: ../samba-common.templates:37 +msgid "Configure smb.conf through debconf?" +msgstr "Configuratie in smb.conf met debconf beheren?" + +#. Description +#: ../samba-common.templates:37 +msgid "" +"The rest of the configuration of Samba deals with questions that affect " +"parameters in /etc/samba/smb.conf, which is the file used to configure the " +"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " +"line or an option that spans multiple lines, which could confuse debconf and " +"require you to edit your smb.conf by hand to get it working again." +msgstr "" +"De resterende Samba configuratie beslaat parameters in /etc/samba/smb.conf, " +"het configuratiebestand dat gebruikt wordt voor de Samba programmas (nmbd en " +"smbd). Uw huidige smb.conf bevat een 'include' regel of een optie die " +"meerdere regels beslaat, dit kan debconf mogelijks in verwarring brenngen. " +"Indien debconf in verwarring raakt dient u uw smb.conf handmatig aan te " +"passen om samba terug werkend te krijgen." + +#. Description +#: ../samba-common.templates:37 +msgid "" +"If you don't use debconf to configure smb.conf, you will have to handle any " +"configuration changes yourself, and will not be able to take advantage of " +"periodic configuration enhancements. Therefore, use of debconf is " +"recommended if possible." +msgstr "" +"Indien u geen gebruik maakt van debconf voor het beheer van smb.conf dient u " +"alle configuratie instellingen zelf te doen, en zult u geen voordeel halen " +"uit de periodieke configuratie verbeteringen. Het gebruik van debconf wordt " +"dan ook aangeraden. " + +#. Description +#: ../samba-common.templates:52 +msgid "Workgroup/Domain Name?" +msgstr "Werkgroep/Domeinnaam?" + +#. Description +#: ../samba-common.templates:52 +msgid "" +"This controls what workgroup your server will appear to be in when queried " +"by clients. Note that this parameter also controls the Domain name used with " +"the security=domain setting." +msgstr "" +"Dit bepaald van welke werkgroep uw server deel zal lijken uit te maken bij " +"het beantwoorden van vragen door clients. Merk op dat deze parameter ook de " +"domeinnaam die gebruikt wordt voor de security=domein instelling bepaald." + +#. Description +#: ../samba-common.templates:60 +msgid "Use password encryption?" +msgstr "Wachtwoord versleuteling gebruiken?" + +#. Description +#: ../samba-common.templates:60 +msgid "" +"Recent Windows clients communicate with SMB servers using encrypted " +"passwords. If you want to use clear text passwords you will need to change a " +"parameter in your Windows registry. It is recommended that you use encrypted " +"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " +"and that you set passwords in there for each user using the smbpasswd " +"command." +msgstr "" +"Recente Windows clients maken gebruik van versleutelde wachtwoorden voor de " +"communicatie met SMB-servers. Indien u onversleutelde tekst wachtwoorden " +"wilt gebruiken dient u een parameter te veranderen in de Windows registry. " +"Het gebruik van versleutelde wachtwoorden wordt aangeraden. Indien u dit " +"doet zorg er dan voor dat u een geldig /etc/samba/smbpasswd bestand heeft en " +"dat u de wachtwoorden daar voor elke gebruiker met behulp van smbpasswd " +"insteld. " + +#. Description +#: ../samba.templates:4 +msgid "Create samba password database, /var/lib/samba/passdb.tdb?" +msgstr "Samba wachtwoord database, /var/lib/samba/passdb.tdb, aanmaken?" + +#. Description +#: ../samba.templates:4 +msgid "" +"To be compatible with the defaults in most versions of Windows, Samba must " +"be configured to use encrypted passwords. This requires user passwords to " +"be stored in a file separate from /etc/passwd. This file can be created " +"automatically, but the passwords must be added manually (by you or the user) " +"by running smbpasswd, and you must arrange to keep it up-to-date in the " +"future. If you do not create it, you will have to reconfigure samba (and " +"probably your client machines) to use plaintext passwords. See /usr/share/" +"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " +"details." +msgstr "" +"Om compatibel te zijn met de standaard instellingen van de meeste " +"Windowsversies dient Samba gebruik te maken van versleutelde wachtwoorden. " +"Dit vereist dat de gebruikerswachtwoorden opgeslagen worden in een bestand " +"dat verschilt van /etc/passwd. Dit bestand kan automatisch aangemaakt " +"worden, maar de wachtwoorden dienen handmatig (door de gebuiker) toegevoegt " +"te worden met het smbpasswd commando. U dient dit bestand in de toekomst ook " +"aktueel te houden. Indien u dit bestand niet aanmaakt zult u samba (en naar " +"alle waarschijnlijkheid de client machines) moeten herconfigureren zodat " +"deze onversleutelde wachtwoorden gebruiken. Zie /usr/share/doc/samba-doc/" +"htmldocs/ENCRYPTION.html uit het samba-doc pakket voor meer details." + +#. Description +#: ../samba.templates:17 +msgid "Samba's log files have moved." +msgstr "Samba's log bestanden zijn verhuisd." + +#. Description +#: ../samba.templates:17 +msgid "" +"Starting with the first packages of Samba 2.2 for Debian the log files for " +"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " +"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." +msgstr "" +"Vanaf de eerste Debian pakketten vaan Samba versie 2.2 zijn de log bestanden " +"van beide Samba daemons (nmbd en smbd) opgeslagen in /var/log/samba/. De log " +"bestanden voor nmbd en smbd zijn, respectievelijk, log.nmbd en log.smbd." + +#. Description +#: ../samba.templates:17 +msgid "" +"The old log files that were in /var/log/ will be moved to the new location " +"for you." +msgstr "" +"De oude logbestanden in /var/log worden voor u naar de nieuwe locatie " +"verplaatst." + +#. Description +#: ../samba.templates:28 +msgid "Running nmbd from inetd is no longer supported" +msgstr "nmbd vanuit inetd draaien wordt niet langer ondersteund" + +#. Description +#: ../samba.templates:28 +msgid "" +"Your system was previously configured to start nmbd and smbd from inetd. As " +"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " +"If you have modified your /etc/init.d/samba startup script, you may need to " +"adjust it by hand now so that nmbd will start." +msgstr "" +"Uw systeem was geconfigureerd om nmbd en smbd vanuit inetd te starten. Vanaf " +"versie 2.999+3.0.alpha20-4 kan nmbd niet langer door inetd gestart worden. " +"Indien u uw /etc/init.d/samba startup-script aangepast had, dient u dit " +"mogelijks aan te passen opdat nmbd zou starten." + +#. Choices +#: ../samba.templates:36 +msgid "daemons, inetd" +msgstr "daemons, inetd" + +#. Description +#: ../samba.templates:38 +msgid "How do you want to run Samba?" +msgstr "Hoe wilt u Samba draaien?" + +#. Description +#: ../samba.templates:38 +msgid "" +"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " +"daemon is the recommended approach." +msgstr "" +"De Samba daemon smbd kan als een normale daemon of via inetd draaien. Als " +"een daemon is de aangeraden aanpak." + +#. Description +#: ../samba.templates:45 +msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" +msgstr "/etc/samba/smbpasswd verplaatsen naar /var/lib/samba/passdb.tdb?" + +#. Description +#: ../samba.templates:45 +msgid "" +"Samba 3.0 introduces a newer, more complete SAM database interface which " +"supersedes the /etc/samba/smbpasswd file. Would you like your existing " +"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " +"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " +"here." +msgstr "" +"Samba 3.0 introduceert een nieuwe, meer complete SAM databaseinterface die " +"het /etc/samba/smbpasswd bestand overstijgt. \"Wilt u dat ik uw bestaand " +"smbpasswd bestand voor u naar /var/lib/samba/passdb.tdb migreer? Indien u " +"van plan bent om, in plaats hiervan, een ander pdb-backend (e.g. LDAP) te " +"gebruiken dient u hier 'nee' te antwoorden." + +#. Description +#: ../swat.templates:3 +msgid "Your smb.conf will be re-written!" +msgstr "Uw smb.conf wordt herschreven!" + +#. Description +#: ../swat.templates:3 +msgid "" +"SWAT will rewrite your smb.conf file. It will rearrange the entries and " +"delete all comments, include= and copy= options. If you have a carefully " +"crafted smb.conf then back it up or don't use SWAT!" +msgstr "" +"SWAT zal uw smb.conf bestand herschrijven. Het zal de ingangen anders " +"schikken en alle comments, include= en copy= opties verwijderen. Als u een, " +"met veel zorg, handmatig opgebouwd smb.conf bestand heeft, maak dan een " +"reservekopie of zie van het gebruik van SWAT af! " diff --git a/packaging/Debian/debian-stable/po/pt_BR.po b/packaging/Debian/debian-woody/po/pt_BR.po index 2af42a562b..2af42a562b 100644 --- a/packaging/Debian/debian-stable/po/pt_BR.po +++ b/packaging/Debian/debian-woody/po/pt_BR.po diff --git a/packaging/Debian/debian-woody/po/templates.pot b/packaging/Debian/debian-woody/po/templates.pot new file mode 100644 index 0000000000..465f4719b0 --- /dev/null +++ b/packaging/Debian/debian-woody/po/templates.pot @@ -0,0 +1,233 @@ +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# +# Developers do not need to manually edit POT or PO files. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2003-08-30 19:08-0500\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" +"Language-Team: LANGUAGE <LL@li.org>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=CHARSET\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Description +#: ../samba-common.templates:3 +msgid "Character Set for Unix filesystem" +msgstr "" + +#. Description +#: ../samba-common.templates:3 +msgid "" +"You currently have a \"character set\" configured in your smb.conf. In " +"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please " +"specify the character set you wish to use for theis new option, which " +"controls how Samba interprets filenames on the file system." +msgstr "" + +#. Description +#: ../samba-common.templates:3 +msgid "If you leave this option blank, your smb.conf will not be changed." +msgstr "" + +#. Description +#: ../samba-common.templates:13 +msgid "Character Set for DOS clients" +msgstr "" + +#. Description +#: ../samba-common.templates:13 +msgid "" +"You currently have a \"client code page\" set in your smb.conf. In Samba " +"3.0, this option is replaced by the option \"dos charset\". Please specify " +"the character set you wish to use for this new option. In most cases, the " +"default chosen for you will be sufficient. Note that this option is not " +"needed to support Windows clients, it is only for DOS clients. If you leave " +"this option blank, your smb.conf will not be changed." +msgstr "" + +#. Description +#: ../samba-common.templates:24 +msgid "Modify smb.conf to use WINS settings from DHCP?" +msgstr "" + +#. Description +#: ../samba-common.templates:24 +msgid "" +"If your computer gets IP address information from a DHCP server on the " +"network, the DHCP server may also provide information about WINS servers " +"(\"NetBIOS name servers\") present on the network. This requires a change " +"to your smb.conf file so that DHCP-provided WINS settings will automatically " +"be read from /etc/samba/dhcp.conf." +msgstr "" + +#. Description +#: ../samba-common.templates:24 +msgid "" +"You must have the dhcp3-client package installed to take advantage of this " +"feature." +msgstr "" + +#. Description +#: ../samba-common.templates:37 +msgid "Configure smb.conf through debconf?" +msgstr "" + +#. Description +#: ../samba-common.templates:37 +msgid "" +"The rest of the configuration of Samba deals with questions that affect " +"parameters in /etc/samba/smb.conf, which is the file used to configure the " +"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' " +"line or an option that spans multiple lines, which could confuse debconf and " +"require you to edit your smb.conf by hand to get it working again." +msgstr "" + +#. Description +#: ../samba-common.templates:37 +msgid "" +"If you don't use debconf to configure smb.conf, you will have to handle any " +"configuration changes yourself, and will not be able to take advantage of " +"periodic configuration enhancements. Therefore, use of debconf is " +"recommended if possible." +msgstr "" + +#. Description +#: ../samba-common.templates:52 +msgid "Workgroup/Domain Name?" +msgstr "" + +#. Description +#: ../samba-common.templates:52 +msgid "" +"This controls what workgroup your server will appear to be in when queried " +"by clients. Note that this parameter also controls the Domain name used with " +"the security=domain setting." +msgstr "" + +#. Description +#: ../samba-common.templates:60 +msgid "Use password encryption?" +msgstr "" + +#. Description +#: ../samba-common.templates:60 +msgid "" +"Recent Windows clients communicate with SMB servers using encrypted " +"passwords. If you want to use clear text passwords you will need to change a " +"parameter in your Windows registry. It is recommended that you use encrypted " +"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file " +"and that you set passwords in there for each user using the smbpasswd " +"command." +msgstr "" + +#. Description +#: ../samba.templates:4 +msgid "Create samba password database, /var/lib/samba/passdb.tdb?" +msgstr "" + +#. Description +#: ../samba.templates:4 +msgid "" +"To be compatible with the defaults in most versions of Windows, Samba must " +"be configured to use encrypted passwords. This requires user passwords to " +"be stored in a file separate from /etc/passwd. This file can be created " +"automatically, but the passwords must be added manually (by you or the user) " +"by running smbpasswd, and you must arrange to keep it up-to-date in the " +"future. If you do not create it, you will have to reconfigure samba (and " +"probably your client machines) to use plaintext passwords. See /usr/share/" +"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more " +"details." +msgstr "" + +#. Description +#: ../samba.templates:17 +msgid "Samba's log files have moved." +msgstr "" + +#. Description +#: ../samba.templates:17 +msgid "" +"Starting with the first packages of Samba 2.2 for Debian the log files for " +"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The " +"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively." +msgstr "" + +#. Description +#: ../samba.templates:17 +msgid "" +"The old log files that were in /var/log/ will be moved to the new location " +"for you." +msgstr "" + +#. Description +#: ../samba.templates:28 +msgid "Running nmbd from inetd is no longer supported" +msgstr "" + +#. Description +#: ../samba.templates:28 +msgid "" +"Your system was previously configured to start nmbd and smbd from inetd. As " +"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd. " +"If you have modified your /etc/init.d/samba startup script, you may need to " +"adjust it by hand now so that nmbd will start." +msgstr "" + +#. Choices +#: ../samba.templates:36 +msgid "daemons, inetd" +msgstr "" + +#. Description +#: ../samba.templates:38 +msgid "How do you want to run Samba?" +msgstr "" + +#. Description +#: ../samba.templates:38 +msgid "" +"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a " +"daemon is the recommended approach." +msgstr "" + +#. Description +#: ../samba.templates:45 +msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?" +msgstr "" + +#. Description +#: ../samba.templates:45 +msgid "" +"Samba 3.0 introduces a newer, more complete SAM database interface which " +"supersedes the /etc/samba/smbpasswd file. Would you like your existing " +"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you? If you " +"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' " +"here." +msgstr "" + +#. Description +#: ../swat.templates:3 +msgid "Your smb.conf will be re-written!" +msgstr "" + +#. Description +#: ../swat.templates:3 +msgid "" +"SWAT will rewrite your smb.conf file. It will rearrange the entries and " +"delete all comments, include= and copy= options. If you have a carefully " +"crafted smb.conf then back it up or don't use SWAT!" +msgstr "" diff --git a/packaging/Debian/debian-stable/python2.2-samba.files b/packaging/Debian/debian-woody/python2.2-samba.files index a24e2b98c8..a24e2b98c8 100644 --- a/packaging/Debian/debian-stable/python2.2-samba.files +++ b/packaging/Debian/debian-woody/python2.2-samba.files diff --git a/packaging/Debian/debian-stable/rules b/packaging/Debian/debian-woody/rules index f17ea75c01..f17ea75c01 100755 --- a/packaging/Debian/debian-stable/rules +++ b/packaging/Debian/debian-woody/rules diff --git a/packaging/Debian/debian-stable/samba-common.config b/packaging/Debian/debian-woody/samba-common.config index ed76b95cb8..ed76b95cb8 100644 --- a/packaging/Debian/debian-stable/samba-common.config +++ b/packaging/Debian/debian-woody/samba-common.config diff --git a/packaging/Debian/debian-stable/samba-common.dhcp b/packaging/Debian/debian-woody/samba-common.dhcp index 3b2fa4ba19..3b2fa4ba19 100644 --- a/packaging/Debian/debian-stable/samba-common.dhcp +++ b/packaging/Debian/debian-woody/samba-common.dhcp diff --git a/packaging/Debian/debian-woody/samba-common.dirs b/packaging/Debian/debian-woody/samba-common.dirs new file mode 100644 index 0000000000..c089ad7357 --- /dev/null +++ b/packaging/Debian/debian-woody/samba-common.dirs @@ -0,0 +1,2 @@ +etc/samba +etc/dhcp3/dhclient-enter-hooks.d diff --git a/packaging/Debian/debian-stable/samba-common.files b/packaging/Debian/debian-woody/samba-common.files index 0b6baff5f1..0b6baff5f1 100644 --- a/packaging/Debian/debian-stable/samba-common.files +++ b/packaging/Debian/debian-woody/samba-common.files diff --git a/packaging/Debian/debian-woody/samba-common.postinst b/packaging/Debian/debian-woody/samba-common.postinst new file mode 100644 index 0000000000..6c6eb9bf53 --- /dev/null +++ b/packaging/Debian/debian-woody/samba-common.postinst @@ -0,0 +1,139 @@ +#!/bin/sh +# +# + +set -e + +# Do debconf stuff here +. /usr/share/debconf/confmodule + +# We need a default smb.conf file. If one doesn't exist we put in place +# one that has some basic defaults. +if [ ! -e /etc/samba/smb.conf ]; then + cp -a /usr/share/samba/smb.conf /etc/samba/ +fi + +# Static tempfile location, dpkg-style +TMPFILE=/etc/samba/smb.conf.dpkg-tmp + +# ------------------------- Debconf questions start --------------------- + +# Is the user configuring with debconf, or he/she prefers swat/manual +# config? +db_get samba-common/do_debconf || true +if [ "${RET}" = "true" ]; then + # Get workgroup name + db_get samba-common/workgroup || true + WORKGROUP="${RET}" + + # Oh my GOD, this is ugly. Why would anyone put these + # characters in a workgroup name? Why, Lord, why??? + WORKGROUP=`echo $WORKGROUP | \ + sed -e's/\\\\/\\\\\\\\/g + s#/#\\\\/#g + s/&/\\\&/g + s/\\\$/\\\\\\\$/g'` + + sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i + /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ \ + s/^\([[:space:]]*\)workgroup[[:space:]]*=.*/\1workgroup = ${WORKGROUP}/i" \ + < /etc/samba/smb.conf >${TMPFILE} + mv -f ${TMPFILE} /etc/samba/smb.conf + + # Encrypt passwords? + db_get samba-common/encrypt_passwords || true + ENCRYPT_PASSWORDS="${RET}" + + sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i + /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ \ + s/^\([[:space:]]*\)encrypt passwords[[:space:]]*=.*/\1encrypt passwords = ${ENCRYPT_PASSWORDS}/i" \ + < /etc/samba/smb.conf >${TMPFILE} + mv -f ${TMPFILE} /etc/samba/smb.conf + + # Install DHCP support + db_get samba-common/dhcp && DHCPVAL="$RET" + db_fget samba-common/dhcp applied || true + if [ "$DHCPVAL" = true ] && [ "$RET" != true ] && \ + ! grep -q dhcp.conf /etc/samba/smb.conf + then + sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i + /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { + /wins server[[:space:]]*=/a \\ +\\ +# If we receive WINS server info from DHCP, override the options above. \\ + include = /etc/samba/dhcp.conf +}" < /etc/samba/smb.conf > ${TMPFILE} + mv -f ${TMPFILE} /etc/samba/smb.conf + elif [ "$RET" != true ] && grep -q dhcp.conf /etc/samba/smb.conf + then + : + # FIXME: here we /delete/ the lines? + fi + # Once we get here, the config has been applied, whatever + # it is. + if [ "$RET" != true ]; then + db_fset samba-common/dhcp applied true + fi + + # Update charset settings? + if ! grep -q "^[[:space:]]*unix charset[[:space:]]*=" /etc/samba/smb.conf + then + db_get samba-common/character_set || true + UNIXCHARSET="${RET}" + if [ -n "$UNIXCHARSET" ] + then + sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i + s/^\([[:space:]]*\)character set/\1character set/i + /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { + /^[[:space:]]*character set[[:space:]]*=/c \\ + unix charset = $UNIXCHARSET + }" < /etc/samba/smb.conf > ${TMPFILE} + mv -f ${TMPFILE} /etc/samba/smb.conf + fi + fi + + if grep -qi "^[[:space:]]*passdb backend[[:space:]]*=.*unixsam" /etc/samba/smb.conf + then + sed -e 's/^\([[:space:]]*\)passdb backend/\1passdb backend/i + /^[[:space:]]*passdb backend/ { + s/unixsam/guest/i + }' < /etc/samba/smb.conf > ${TMPFILE} + mv -f ${TMPFILE} /etc/samba/smb.conf + fi + + if ! grep -q "^[[:space:]]*dos charset[[:space:]]*=" /etc/samba/smb.conf + then + db_get samba-common/codepage || true + DOSCHARSET="${RET}" + if [ -n "$DOSCHARSET" ] + then + sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i + s/^\([[:space:]]*\)client code page/\1client code page/i + /^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ { + /^[[:space:]]*client code page[[:space:]]*=/c \\ + dos charset = $DOSCHARSET +}" < /etc/samba/smb.conf > ${TMPFILE} + mv -f ${TMPFILE} /etc/samba/smb.conf + fi + fi + + if dpkg --compare-versions "$2" lt 2.999+3.0.alpha20-4 \ + && ! grep -q "^[[:space:]]*panic action[[:space:]]*=" /etc/samba/smb.conf + then + sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i + /^[[:space:]]*\[global\]/a \\ +\\ +# Do something sensible when Samba crashes: mail the admin a backtrace\\ + panic action = /usr/share/samba/panic-action %d" < /etc/samba/smb.conf > ${TMPFILE} + mv -f ${TMPFILE} /etc/samba/smb.conf + fi + +fi + +chmod a+r /etc/samba/smb.conf + +# ------------------------- Debconf questions end --------------------- + +db_stop + +#DEBHELPER# diff --git a/packaging/Debian/debian-woody/samba-common.postrm b/packaging/Debian/debian-woody/samba-common.postrm new file mode 100644 index 0000000000..8a4b6d3d55 --- /dev/null +++ b/packaging/Debian/debian-woody/samba-common.postrm @@ -0,0 +1,10 @@ +#!/bin/sh +# +# + +if [ "$1" = purge ]; then + # Remove any files left in /etc/samba/ + rm -Rf /etc/samba/ +fi + +#DEBHELPER# diff --git a/packaging/Debian/debian-stable/samba-common.templates b/packaging/Debian/debian-woody/samba-common.templates index 9eb0676e93..9eb0676e93 100644 --- a/packaging/Debian/debian-stable/samba-common.templates +++ b/packaging/Debian/debian-woody/samba-common.templates diff --git a/packaging/Debian/debian-woody/samba-doc.docs b/packaging/Debian/debian-woody/samba-doc.docs new file mode 100644 index 0000000000..d9f0aa1d0a --- /dev/null +++ b/packaging/Debian/debian-woody/samba-doc.docs @@ -0,0 +1,8 @@ +docs/Samba3-HOWTO.pdf +docs/Samba3-ByExample.pdf +docs/Samba3-Developers-Guide.pdf +docs/REVISION +docs/THANKS +docs/history +docs/htmldocs/ +docs/registry/ diff --git a/packaging/Debian/debian-woody/samba-doc.examples b/packaging/Debian/debian-woody/samba-doc.examples new file mode 100644 index 0000000000..e71180364c --- /dev/null +++ b/packaging/Debian/debian-woody/samba-doc.examples @@ -0,0 +1,2 @@ +debian/wins2dns.awk +source/smbadduser diff --git a/packaging/Debian/debian-stable/samba.config b/packaging/Debian/debian-woody/samba.config index 89792d436e..89792d436e 100644 --- a/packaging/Debian/debian-stable/samba.config +++ b/packaging/Debian/debian-woody/samba.config diff --git a/packaging/Debian/debian-woody/samba.cron.daily b/packaging/Debian/debian-woody/samba.cron.daily new file mode 100644 index 0000000000..42fc98d8f6 --- /dev/null +++ b/packaging/Debian/debian-woody/samba.cron.daily @@ -0,0 +1,16 @@ +#!/bin/sh +# +# cron script to save a backup copy of /etc/samba/smbpasswd in /var/backups. +# +# Written by Eloy A. Paris <peloy@debian.org> for the Debian project. +# + +BAK=/var/backups + +umask 022 +if cd $BAK; then + # Make sure /etc/samba/smbpasswd exists + if [ -f /etc/samba/smbpasswd ]; then + cmp -s smbpasswd.bak /etc/samba/smbpasswd || cp -p /etc/samba/smbpasswd smbpasswd.bak + fi +fi diff --git a/packaging/Debian/debian-stable/samba.dirs b/packaging/Debian/debian-woody/samba.dirs index 33178f42d2..33178f42d2 100644 --- a/packaging/Debian/debian-stable/samba.dirs +++ b/packaging/Debian/debian-woody/samba.dirs diff --git a/packaging/Debian/debian-stable/samba.docs b/packaging/Debian/debian-woody/samba.docs index 9a5a9fc6bf..9a5a9fc6bf 100644 --- a/packaging/Debian/debian-stable/samba.docs +++ b/packaging/Debian/debian-woody/samba.docs diff --git a/packaging/Debian/debian-stable/samba.files b/packaging/Debian/debian-woody/samba.files index 4a08fa6af7..cbca5d8e86 100644 --- a/packaging/Debian/debian-stable/samba.files +++ b/packaging/Debian/debian-woody/samba.files @@ -1,4 +1,3 @@ -usr/bin/testprns usr/bin/smbstatus usr/bin/smbcontrol usr/bin/tdbbackup @@ -10,7 +9,6 @@ usr/sbin/mksmbpasswd usr/lib/samba/vfs usr/share/man/man1/smbcontrol.1 usr/share/man/man1/smbstatus.1 -usr/share/man/man1/testprns.1 usr/share/man/man1/profiles.1 usr/share/man/man5/smbpasswd.5 usr/share/man/man8/nmbd.8 diff --git a/packaging/Debian/debian-woody/samba.init b/packaging/Debian/debian-woody/samba.init new file mode 100644 index 0000000000..5d0f4671a0 --- /dev/null +++ b/packaging/Debian/debian-woody/samba.init @@ -0,0 +1,83 @@ +#!/bin/sh +# +# Start/stops the Samba daemons (nmbd and smbd). +# +# + +# Defaults +RUN_MODE="daemons" + +# Reads config file (will override defaults above) +[ -r /etc/default/samba ] && . /etc/default/samba + +NMBDPID=/var/run/samba/nmbd.pid +SMBDPID=/var/run/samba/smbd.pid + +# clear conflicting settings from the environment +unset TMPDIR + +# See if the daemons are there +test -x /usr/sbin/nmbd -a -x /usr/sbin/smbd || exit 0 + +case "$1" in + start) + echo -n "Starting Samba daemons:" + + echo -n " nmbd" + start-stop-daemon --start --quiet --exec /usr/sbin/nmbd -- -D + + if [ "$RUN_MODE" != "inetd" ]; then + echo -n " smbd" + start-stop-daemon --start --quiet --exec /usr/sbin/smbd -- -D + fi + + echo "." + ;; + stop) + echo -n "Stopping Samba daemons: " + + start-stop-daemon --stop --quiet --pidfile $NMBDPID + # Wait a little and remove stale PID file + sleep 1 + if [ -f $NMBDPID ] && ! ps h `cat $NMBDPID` > /dev/null + then + # Stale PID file (nmbd was succesfully stopped), + # remove it (should be removed by nmbd itself IMHO.) + rm -f $NMBDPID + fi + echo -n "nmbd" + + if [ "$RUN_MODE" != "inetd" ]; then + start-stop-daemon --stop --quiet --pidfile $SMBDPID + # Wait a little and remove stale PID file + sleep 1 + if [ -f $SMBDPID ] && ! ps h `cat $SMBDPID` > /dev/null + then + # Stale PID file (nmbd was succesfully stopped), + # remove it (should be removed by smbd itself IMHO.) + rm -f $SMBDPID + fi + echo -n " smbd" + fi + + echo "." + + ;; + reload) + echo -n "Reloading /etc/samba/smb.conf (smbd only)" + start-stop-daemon --stop --signal HUP --pidfile $SMBDPID + + echo "." + ;; + restart|force-reload) + $0 stop + sleep 1 + $0 start + ;; + *) + echo "Usage: /etc/init.d/samba {start|stop|reload|restart|force-reload}" + exit 1 + ;; +esac + +exit 0 diff --git a/packaging/Debian/debian-stable/samba.logrotate b/packaging/Debian/debian-woody/samba.logrotate index f90437bf2a..f90437bf2a 100644 --- a/packaging/Debian/debian-stable/samba.logrotate +++ b/packaging/Debian/debian-woody/samba.logrotate diff --git a/packaging/Debian/debian-stable/samba.pamd b/packaging/Debian/debian-woody/samba.pamd index 5db2bbd31f..5db2bbd31f 100644 --- a/packaging/Debian/debian-stable/samba.pamd +++ b/packaging/Debian/debian-woody/samba.pamd diff --git a/packaging/Debian/debian-stable/samba.postinst b/packaging/Debian/debian-woody/samba.postinst index 7b0bdd92ad..7b0bdd92ad 100644 --- a/packaging/Debian/debian-stable/samba.postinst +++ b/packaging/Debian/debian-woody/samba.postinst diff --git a/packaging/Debian/debian-woody/samba.postrm b/packaging/Debian/debian-woody/samba.postrm new file mode 100644 index 0000000000..b79fe1d009 --- /dev/null +++ b/packaging/Debian/debian-woody/samba.postrm @@ -0,0 +1,26 @@ +#!/bin/sh -e +# +# + +if [ "$1" = purge ]; then + + # Remove Samba's state files, both volatile and non-volatile + rm -Rf /var/run/samba/ /var/cache/samba/ /var/lib/samba + + # Remove log files + rm -Rf /var/log/samba/ + + # Remove init.d configuration file + echo Removing configuration file /etc/default/samba... >&2 + rm -f /etc/default/samba + + # Remove NetBIOS entries from /etc/inetd.conf + update-inetd --remove netbios-ssn + +else + # Not purging, do not remove NetBIOS entries from /etc/inetd.conf + update-inetd --disable netbios-ssn + +fi + +#DEBHELPER# diff --git a/packaging/Debian/debian-woody/samba.prerm b/packaging/Debian/debian-woody/samba.prerm new file mode 100644 index 0000000000..ab62c706d8 --- /dev/null +++ b/packaging/Debian/debian-woody/samba.prerm @@ -0,0 +1,10 @@ +#!/bin/sh -e + +if [ "$1" = upgrade -a -n "$2" ] && dpkg --compare-versions "$2" lt 2.99 \ + && [ -e /var/lib/samba/passdb.tdb -a ! -e /etc/samba/smbpasswd ] +then + pdbedit -i tdbsam -e smbpasswd + rm -f /var/lib/samba/passdb.tdb +fi + +#DEBHELPER# diff --git a/packaging/Debian/debian-stable/samba.templates b/packaging/Debian/debian-woody/samba.templates index e7fcd1d4cc..e7fcd1d4cc 100644 --- a/packaging/Debian/debian-stable/samba.templates +++ b/packaging/Debian/debian-woody/samba.templates diff --git a/packaging/Debian/debian-woody/scripts/patch-source b/packaging/Debian/debian-woody/scripts/patch-source new file mode 100755 index 0000000000..a8559b4167 --- /dev/null +++ b/packaging/Debian/debian-woody/scripts/patch-source @@ -0,0 +1,28 @@ +#!/bin/sh -e +# +# + +for patch in debian/patches/*.patch; do + echo '->'`basename $patch`: + patch -p1 --ignore-whitespace < $patch +done + +# This code is currently not used because it creates a long version +# number string. For now we're sticking to <upstream version>-Debian, +# as in 3.0.0rc2-Debian. peloy@debian.org.- + +# ---- Begin unused code ---- +# Get Debian version number from 1st line of the Debian changelog +#DEBIAN_VERSION=`sed -n -e '1s/^.*(\(.*\)).*$/\1/p' debian/changelog` + +# Insert Debian version number in source/VERSION, which will then be +# used to create source/include/version.h. +#TMPFILE=source/VERSION.debian +#sed -e "s/^\(SAMBA_VERSION_VENDOR_SUFFIX=\).*$/\1\"Debian-${DEBIAN_VERSION}\"/" source/VERSION > ${TMPFILE} +#mv -f ${TMPFILE} source/VERSION +# ---- End unused code ---- + +# Regenerate configure only if it is older than configure.in +[ source/configure -ot source/configure.in ] && (cd source && sh ./autogen.sh) + +exit 0 diff --git a/packaging/Debian/debian-stable/scripts/unpatch-source b/packaging/Debian/debian-woody/scripts/unpatch-source index d3681cfa50..d3681cfa50 100755 --- a/packaging/Debian/debian-stable/scripts/unpatch-source +++ b/packaging/Debian/debian-woody/scripts/unpatch-source diff --git a/packaging/Debian/debian-woody/smb.conf b/packaging/Debian/debian-woody/smb.conf new file mode 100644 index 0000000000..8a75979945 --- /dev/null +++ b/packaging/Debian/debian-woody/smb.conf @@ -0,0 +1,237 @@ +# +# Sample configuration file for the Samba suite for Debian GNU/Linux. +# +# +# This is the main Samba configuration file. You should read the +# smb.conf(5) manual page in order to understand the options listed +# here. Samba has a huge number of configurable options most of which +# are not shown in this example +# +# Any line which starts with a ; (semi-colon) or a # (hash) +# is a comment and is ignored. In this example we will use a # +# for commentary and a ; for parts of the config file that you +# may wish to enable +# +# NOTE: Whenever you modify this file you should run the command +# "testparm" to check that you have not many any basic syntactic +# errors. +# + +#======================= Global Settings ======================= + +[global] + +## Browsing/Identification ### + +# Change this to the workgroup/NT-domain name your Samba server will part of + workgroup = DEBIAN_FANS + +# server string is the equivalent of the NT Description field + server string = %h server (Samba %v) + +# Windows Internet Name Serving Support Section: +# WINS Support - Tells the NMBD component of Samba to enable its WINS Server +; wins support = no + +# WINS Server - Tells the NMBD components of Samba to be a WINS Client +# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both +; wins server = w.x.y.z + +# This will prevent nmbd to search for NetBIOS names through DNS. + dns proxy = no + +# What naming service and in what order should we use to resolve host names +# to IP addresses +; name resolve order = lmhosts host wins bcast + + +#### Debugging/Accounting #### + +# This tells Samba to use a separate log file for each machine +# that connects + log file = /var/log/samba/log.%m + +# Put a capping on the size of the log files (in Kb). + max log size = 1000 + +# If you want Samba to only log through syslog then set the following +# parameter to 'yes'. +; syslog only = no + +# We want Samba to log a minimum amount of information to syslog. Everything +# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log +# through syslog you should set the following parameter to something higher. + syslog = 0 + +# Do something sensible when Samba crashes: mail the admin a backtrace + panic action = /usr/share/samba/panic-action %d + + +####### Authentication ####### + +# "security = user" is always a good idea. This will require a Unix account +# in this server for every user accessing the server. See +# /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc +# package for details. +; security = user + +# You may wish to use password encryption. See the section on +# 'encrypt passwords' in the smb.conf(5) manpage before enabling. + encrypt passwords = no + +# If you are using encrypted passwords, Samba will need to know what +# password database type you are using. + passdb backend = tdbsam guest + + obey pam restrictions = yes + +; guest account = nobody + invalid users = root + +# This boolean parameter controls whether Samba attempts to sync the Unix +# password with the SMB password when the encrypted SMB password in the +# passdb is changed. +; unix password sync = no + +# For Unix password sync to work on a Debian GNU/Linux system, the following +# parameters must be set (thanks to Augustin Luton <aluton@hybrigenics.fr> for +# sending the correct chat script for the passwd program in Debian Potato). + passwd program = /usr/bin/passwd %u + passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n . + +# This boolean controls whether PAM will be used for password changes +# when requested by an SMB client instead of the program listed in +# 'passwd program'. The default is 'no'. +; pam password change = no + + +########## Printing ########## + +# If you want to automatically load your printer list rather +# than setting them up individually then you'll need this +; load printers = yes + +# lpr(ng) printing. You may wish to override the location of the +# printcap file +; printing = bsd +; printcap name = /etc/printcap + +# CUPS printing. See also the cupsaddsmb(8) manpage in the +# cupsys-client package. +; printing = cups +; printcap name = cups + +# When using [print$], root is implicitly a 'printer admin', but you can +# also give this right to other users to add drivers and set printer +# properties +; printer admin = @ntadmin + + +######## File sharing ######## + +# Name mangling options +; preserve case = yes +; short preserve case = yes + + +############ Misc ############ + +# Using the following line enables you to customise your configuration +# on a per machine basis. The %m gets replaced with the netbios name +# of the machine that is connecting +; include = /home/samba/etc/smb.conf.%m + +# Most people will find that this option gives better performance. +# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html +# for details +# You may want to add the following on a Linux system: +# SO_RCVBUF=8192 SO_SNDBUF=8192 + socket options = TCP_NODELAY + +# The following parameter is useful only if you have the linpopup package +# installed. The samba maintainer and the linpopup maintainer are +# working to ease installation and configuration of linpopup and samba. +; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & + +# Domain Master specifies Samba to be the Domain Master Browser. If this +# machine will be configured as a BDC (a secondary logon server), you +# must set this to 'no'; otherwise, the default behavior is recommended. +; domain master = auto + +# Some defaults for winbind (make sure you're not using the ranges +# for something else.) +; idmap uid = 10000-20000 +; idmap gid = 10000-20000 +; template shell = /bin/bash + +#======================= Share Definitions ======================= + +[homes] + comment = Home Directories + browseable = no + +# By default, the home directories are exported read-only. Change next +# parameter to 'yes' if you want to be able to write to them. + writable = no + +# File creation mask is set to 0700 for security reasons. If you want to +# create files with group=rw permissions, set next parameter to 0775. + create mask = 0700 + +# Directory creation mask is set to 0700 for security reasons. If you want to +# create dirs. with group=rw permissions, set next parameter to 0775. + directory mask = 0700 + +# Un-comment the following and create the netlogon directory for Domain Logons +# (you need to configure Samba to act as a domain controller too.) +;[netlogon] +; comment = Network Logon Service +; path = /home/samba/netlogon +; guest ok = yes +; writable = no +; share modes = no + +[printers] + comment = All Printers + browseable = no + path = /tmp + printable = yes + public = no + writable = no + create mode = 0700 + +# Windows clients look for this share name as a source of downloadable +# printer drivers +[print$] + comment = Printer Drivers + path = /var/lib/samba/printers + browseable = yes + read only = yes + guest ok = no +# Uncomment to allow remote administration of Windows print drivers. +# Replace 'ntadmin' with the name of the group your admin users are +# members of. +; write list = root, @ntadmin + +# A sample share for sharing your CD-ROM with others. +;[cdrom] +; comment = Samba server's CD-ROM +; writable = no +; locking = no +; path = /cdrom +; public = yes + +# The next two parameters show how to auto-mount a CD-ROM when the +# cdrom share is accesed. For this to work /etc/fstab must contain +# an entry like this: +# +# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 +# +# The CD-ROM gets unmounted automatically after the connection to the +# +# If you don't want to use auto-mounting/unmounting make sure the CD +# is mounted on /cdrom +# +; preexec = /bin/mount /cdrom +; postexec = /bin/umount /cdrom + diff --git a/packaging/Debian/debian-woody/smbclient.files b/packaging/Debian/debian-woody/smbclient.files new file mode 100644 index 0000000000..96e8945bf3 --- /dev/null +++ b/packaging/Debian/debian-woody/smbclient.files @@ -0,0 +1,15 @@ +usr/bin/smbclient +usr/bin/smbtar +usr/bin/rpcclient +usr/bin/smbspool +usr/bin/smbtree +usr/bin/smbcacls +usr/bin/smbcquotas +usr/share/man/man1/smbclient.1 +usr/share/man/man1/smbtar.1 +usr/share/man/man1/rpcclient.1 +usr/share/man/man8/smbspool.8 +usr/share/man/man1/smbcacls.1 +usr/share/man/man1/smbcquotas.1 +usr/share/man/man1/smbtree.1 +usr/lib/cups/backend/smb diff --git a/packaging/Debian/debian-stable/smbfs.files b/packaging/Debian/debian-woody/smbfs.files index 870db7d645..870db7d645 100644 --- a/packaging/Debian/debian-stable/smbfs.files +++ b/packaging/Debian/debian-woody/smbfs.files diff --git a/packaging/Debian/debian-woody/smbwrapper.dirs b/packaging/Debian/debian-woody/smbwrapper.dirs new file mode 100644 index 0000000000..fd727bddf0 --- /dev/null +++ b/packaging/Debian/debian-woody/smbwrapper.dirs @@ -0,0 +1,2 @@ +usr/bin +usr/share/samba diff --git a/packaging/Debian/debian-woody/smbwrapper.docs b/packaging/Debian/debian-woody/smbwrapper.docs new file mode 100644 index 0000000000..2924e78734 --- /dev/null +++ b/packaging/Debian/debian-woody/smbwrapper.docs @@ -0,0 +1,2 @@ +source/smbwrapper/README +source/smbwrapper/PORTING diff --git a/packaging/Debian/debian-woody/smbwrapper.files b/packaging/Debian/debian-woody/smbwrapper.files new file mode 100644 index 0000000000..08edbead6e --- /dev/null +++ b/packaging/Debian/debian-woody/smbwrapper.files @@ -0,0 +1 @@ +usr/bin/smbsh diff --git a/packaging/Debian/debian-woody/swat.config b/packaging/Debian/debian-woody/swat.config new file mode 100644 index 0000000000..e210fae55e --- /dev/null +++ b/packaging/Debian/debian-woody/swat.config @@ -0,0 +1,11 @@ +#/bin/sh -e +# +# + +# Source debconf library. +. /usr/share/debconf/confmodule + +db_title "Samba Web Administration Tool (SWAT)" + +db_input medium swat/smb_conf_warn || true +db_go diff --git a/packaging/Debian/debian-woody/swat.dirs b/packaging/Debian/debian-woody/swat.dirs new file mode 100644 index 0000000000..d5df7df4b8 --- /dev/null +++ b/packaging/Debian/debian-woody/swat.dirs @@ -0,0 +1,2 @@ +usr/sbin +usr/share/samba/swat diff --git a/packaging/Debian/debian-woody/swat.files b/packaging/Debian/debian-woody/swat.files new file mode 100644 index 0000000000..82fdf104d3 --- /dev/null +++ b/packaging/Debian/debian-woody/swat.files @@ -0,0 +1,3 @@ +usr/sbin/swat +usr/share/samba/swat +usr/share/man/man8/swat.8 diff --git a/packaging/Debian/debian-woody/swat.postinst b/packaging/Debian/debian-woody/swat.postinst new file mode 100644 index 0000000000..338f8a07c2 --- /dev/null +++ b/packaging/Debian/debian-woody/swat.postinst @@ -0,0 +1,23 @@ +#!/bin/sh +# +# + +PATH=/sbin:/bin:/usr/sbin:/usr/bin + +case "$1" in + configure) + ;; + abort-upgrade|abort-remove|abort-deconfigure) + exit 0 + ;; + *) + echo "$0: Unknown action \"$1\"" + exit 0 + ;; +esac + +# Set up swat, turned off by default. +update-inetd --group OTHER --add \ + '#<off># swat\t\tstream\ttcp\tnowait.400\troot\t/usr/sbin/tcpd\t/usr/sbin/swat' + +#DEBHELPER# diff --git a/packaging/Debian/debian-woody/swat.postrm b/packaging/Debian/debian-woody/swat.postrm new file mode 100644 index 0000000000..6bc5873096 --- /dev/null +++ b/packaging/Debian/debian-woody/swat.postrm @@ -0,0 +1,22 @@ +#!/bin/sh +# +# + +case "$1" in + purge) + update-inetd --remove '/usr/sbin/swat$' + ;; + remove) + ;; + upgrade|failed-upgrade|abort-install|abort-upgrade|disappear) + ;; + *) + echo "$0: unknown action \"$1\"" + exit 0 + ;; +esac + +#DEBHELPER# + +exit 0 + diff --git a/packaging/Debian/debian-stable/swat.templates b/packaging/Debian/debian-woody/swat.templates index 0e6ac9f106..0e6ac9f106 100644 --- a/packaging/Debian/debian-stable/swat.templates +++ b/packaging/Debian/debian-woody/swat.templates diff --git a/packaging/Debian/debian-woody/winbind.dirs b/packaging/Debian/debian-woody/winbind.dirs new file mode 100644 index 0000000000..1da8fba83a --- /dev/null +++ b/packaging/Debian/debian-woody/winbind.dirs @@ -0,0 +1 @@ +usr/share/lintian/overrides diff --git a/packaging/Debian/debian-woody/winbind.files b/packaging/Debian/debian-woody/winbind.files new file mode 100644 index 0000000000..fbb76774d4 --- /dev/null +++ b/packaging/Debian/debian-woody/winbind.files @@ -0,0 +1,9 @@ +usr/sbin/winbindd +usr/bin/wbinfo +usr/bin/ntlm_auth +usr/share/man/man1/wbinfo.1 +usr/share/man/man1/ntlm_auth.1 +usr/share/man/man8/winbindd.8 +lib/security/pam_winbind.so +lib/libnss_winbind.so.2 +lib/libnss_wins.so.2 diff --git a/packaging/Debian/debian-woody/winbind.init b/packaging/Debian/debian-woody/winbind.init new file mode 100644 index 0000000000..2dfdf3b835 --- /dev/null +++ b/packaging/Debian/debian-woody/winbind.init @@ -0,0 +1,48 @@ +#!/bin/sh +# +# Start/stops the winbindd daemon. +# +# + +PATH=/sbin:/bin:/usr/sbin:/usr/bin + +DAEMON=/usr/sbin/winbindd + +# clear conflicting settings from the environment +unset TMPDIR + +# See if the daemon is there +test -x $DAEMON || exit 0 + +case "$1" in + start) + echo -n "Starting the Winbind daemon: winbindd" + + start-stop-daemon --start --quiet --exec $DAEMON + + echo "." + ;; + stop) + echo -n "Stopping the Winbind daemon: winbindd" + + start-stop-daemon --stop --quiet --oknodo --exec $DAEMON + + echo "." + ;; + restart|force-reload) + echo -n "Restarting the Winbind daemon: winbindd" + + start-stop-daemon --stop --quiet --oknodo --exec $DAEMON + sleep 2 + start-stop-daemon --start --quiet --exec $DAEMON + + echo "." + ;; + *) + echo "Usage: /etc/init.d/winbind {start|stop|restart|force-reload}" + exit 1 + ;; +esac + +exit 0 + diff --git a/packaging/Debian/debian-woody/winbind.lintian b/packaging/Debian/debian-woody/winbind.lintian new file mode 100644 index 0000000000..fca17d3cca --- /dev/null +++ b/packaging/Debian/debian-woody/winbind.lintian @@ -0,0 +1,6 @@ +winbind: ldconfig-symlink-missing-for-shlib lib/libnss_winbind.so lib/libnss_winbind.so.2 libnss_winbind.so +winbind: ldconfig-symlink-missing-for-shlib lib/libnss_wins.so lib/libnss_wins.so.2 libnss_wins.so +winbind: no-shlibs-control-file lib/libnss_winbind.so.2 +winbind: no-shlibs-control-file lib/libnss_wins.so.2 +winbind: postinst-must-call-ldconfig lib/libnss_wins.so.2 +winbind: postrm-should-call-ldconfig lib/libnss_wins.so.2 diff --git a/packaging/Debian/debian-woody/winbind.logrotate b/packaging/Debian/debian-woody/winbind.logrotate new file mode 100644 index 0000000000..e36cd1281c --- /dev/null +++ b/packaging/Debian/debian-woody/winbind.logrotate @@ -0,0 +1,10 @@ +/var/log/samba/log.winbindd { + weekly + missingok + rotate 7 + postrotate + [ -f /var/run/samba/winbindd.pid ] && kill -HUP `cat /var/run/samba/winbindd.pid` + endscript + compress + notifempty +} diff --git a/packaging/Debian/debian-woody/wins2dns.awk b/packaging/Debian/debian-woody/wins2dns.awk new file mode 100644 index 0000000000..176868a115 --- /dev/null +++ b/packaging/Debian/debian-woody/wins2dns.awk @@ -0,0 +1,38 @@ +#!/usr/bin/awk -f +# +# Date: Wed, 26 Aug 1998 10:37:39 -0600 (MDT) +# From: Jason Gunthorpe <jgg@deltatee.com> +# To: samba@packages.debian.org +# Subject: Nifty samba script +# +# Here is a really nifty script I just wrote for samba, it takes the wins +# database in /var/samba/wins and writes out two dns files for it. In this +# way network wide wins clients can get into the dns for use by unix +# machines. +# +# Perhaps this could be included in /usr/doc/examples or somesuch. +# + +BEGIN { + FS="#|\""; +FORWARD="/tmp/wins.hosts" +REVERSE="/tmp/wins.rev" +DOMAIN="ven.ra.rockwell.com" +} +$3 == "00" { + split($4,a," " ); + split(a[2],b,"."); + while (sub(" ","-",$2)); + $2=tolower($2); + if (b[1] == "255") + next; + if (length($2) >= 8) + print $2"\ta\t"a[2] > FORWARD + else + print $2"\t\ta\t"a[2] > FORWARD + print b[4]"."b[3]"\t\tptr\t"$2"."DOMAIN"." > REVERSE +} +END { + system("echo killall -HUP named"); +} + |