diff options
Diffstat (limited to 'packaging/Mandrake/samba2.spec.tmpl')
| -rw-r--r-- | packaging/Mandrake/samba2.spec.tmpl | 2622 |
1 files changed, 0 insertions, 2622 deletions
diff --git a/packaging/Mandrake/samba2.spec.tmpl b/packaging/Mandrake/samba2.spec.tmpl deleted file mode 100644 index 7b6bc2c49b..0000000000 --- a/packaging/Mandrake/samba2.spec.tmpl +++ /dev/null @@ -1,2622 +0,0 @@ -# Note that this file exists in Mandrake packaging cvs (as samba.spec) -# and samba cvs (as packaging/Mandrake/samba2.spec.tmpl). -# Keep in mind that any changes should take both locations into account -# Considerable effort has gone into making this possible, so that only -# one spec file is maintained, please don't break it. -# It should be possible, without any changes to this file, to build -# binary packages on most recent Mandrake releases: -# 1)from official source releases, using 'cd packaging/Mandrake; sh makerpms.sh' -# 2)from cvs snapshots, using 'cd packaging/Mandrake; sh makerpms-cvs.sh <ver>' -# 3)using official source releases and updated Mandrake packaging, by -# 'rpm -ba samba.spec' -# As such, any sources or patches used in a build from a samba release or -# cvs should be submitted for inclusion in samba cvs. - -%define pkg_name samba -%define ver 3.0.8 -%define drel 1 -%define subrel 1 -%define vscanver 0.3.5 -%define libsmbmajor 0 -%{?!mdkversion: %define mdkversion %(perl -pe '/(\d+)\.(\d)\.?(\d)?/; $_="$1$2".($3||0)' /etc/mandrake-release)} -%define rel %(case `hostname` in (n?.mandrakesoft.com) echo %drel;;(*) echo $[%drel-1].%subrel.$[%mdkversion/10];;esac)mdk -%{?_with_stable_on_cluster: %define rel %(echo $[%{drel}-1].%subrel.$[%{mdkversion}/10]mdk)} -%{?_with_official: %define rel %drel} - -%{!?lib: %global lib lib} -%{!?mklibname: %global mklibname(ds) %lib%{1}%{?2:%{2}}%{?3:_%{3}}%{-s:-static}%{-d:-devel}} - -%define libname %mklibname smbclient %libsmbmajor - -# Version and release replaced by samba-team at release from samba cvs -%define pversion PVERSION -%define prelease PRELEASE - -#Check to see if p(version|release) has been replaced (1 if replaced) -%define have_pversion %(if [ "%pversion" = `echo "pversion" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi) -%define have_prelease %(if [ "%prelease" = `echo "prelease" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi) - -%if %have_pversion -%define source_ver %{pversion} -# Don't abort for stupid reasons on builds from tarballs: -%global _unpackaged_files_terminate_build 0 -%global _missing_doc_files_terminate_build 0 -%else -%define source_ver %{ver} -%endif - -# We might have a prerelease: -%define have_pre %(echo %source_ver|awk '{p=0} /[a-z,A-Z][a-z,A-Z]/ {p=1} {print p}') -%if %have_pre -%define pre_ver %(perl -e '$name="%source_ver"; print ($name =~ /(.*?)[a-z]/);') -%define pre_pre %(echo %source_ver|sed -e 's/%pre_ver//g') -%endif - -# Check to see if we are running a build from a tarball release from samba.org -# (%have_pversion) If so, disable vscan, unless explicitly requested -# (--with vscan). -%define build_vscan 1 -%if %have_pversion -%define build_vscan 0 -%{?_with_vscan: %define build_vscan 1} -%endif - -# We now do detection of the Mandrake release we are building on: -%define build_mdk82 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.2 ];then echo 1; else echo 0; fi) -%define build_mdk81 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.1 ];then echo 1; else echo 0; fi) -%define build_mdk80 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.0 ];then echo 1; else echo 0; fi) -%define build_mdk72 %(if [ `awk '{print $4}' /etc/mandrake-release` = 7.2 ];then echo 1; else echo 0; fi) -%define build_non_default 0 - -# Default options -%define build_alternatives 0 -%define build_system 0 -%define build_acl 1 -%define build_winbind 1 -%define build_wins 1 -%define build_ldap 0 -%define build_ads 1 -%define build_scanners 0 -# CUPS supports functionality for 'printcap name = cups' (9.0 and later): -%define build_cupspc 0 -# %_{pre,postun}_service are provided by rpm-helper in 9.0 and later -%define have_rpmhelper 1 - -# Set defaults for each version -%if %mdkversion >= 1000 -%define build_system 1 -%endif - -%if %mdkversion >= 920 -%define build_alternatives 1 -%endif - -%if %mdkversion >= 910 -%define build_cupspc 1 -%endif - -%if %build_mdk82 -%define have_rpmhelper 0 -%endif - -%if %build_mdk81 -%define build_winbind 0 -%define build_wins 0 -%define have_rpmhelper 0 -%endif - -%if %build_mdk80 -%define build_acl 0 -%define build_winbind 0 -%define build_wins 0 -%define build_ads 0 -%define have_rpmhelper 1 -%endif - -%if %build_mdk72 -%define build_acl 0 -%define build_winbind 0 -%define build_wins 0 -%define build_ads 0 -%define have_rpmhelper 1 -%endif - - -# Allow commandline option overrides (borrowed from Vince's qmail srpm): -# To use it, do rpm [-ba|--rebuild] --with 'xxx' -# Check if the rpm was built with the defaults, otherwise we inform the user -%define build_non_default 0 -%{?_with_system: %global build_system 1} -%{?_without_system: %global build_system 0} -%{?_with_acl: %global build_acl 1} -%{?_with_acl: %global build_non_default 1} -%{?_without_acl: %global build_acl 0} -%{?_without_acl: %global build_non_default 1} -%{?_with_winbind: %global build_winbind 1} -%{?_with_winbind: %global build_non_default 1} -%{?_without_winbind: %global build_winbind 0} -%{?_without_winbind: %global build_non_default 1} -%{?_with_wins: %global build_wins 1} -%{?_with_wins: %global build_non_default 1} -%{?_without_wins: %global build_wins 0} -%{?_without_wins: %global build_non_default 1} -%{?_with_ldap: %global build_ldap 1} -%{?_with_ldap: %global build_non_default 1} -%{?_without_ldap: %global build_ldap 0} -%{?_without_ldap: %global build_non_default 1} -%{?_with_ads: %global build_ads 1} -%{?_with_ads: %global build_non_default 1} -%{?_without_ads: %global build_ads 0} -%{?_without_ads: %global build_non_default 1} -%{?_with_scanners: %global build_scanners 1} -%{?_with_scanners: %global build_non_default 1} -%{?_without_scanners: %global build_scanners 0} -%{?_without_scanners: %global build_non_default 1} -%{?_with_vscan: %global build_vscan 1} -%{?_with_vscan: %global build_non_default 1} -%{?_without_vscan: %global build_vscan 0} -%{?_without_vscan: %global build_non_default 1} - -# As if that weren't enough, we're going to try building with antivirus -# support as an option also -%global build_clamav 0 -%global build_fprot 0 -%global build_fsav 0 -%global build_icap 0 -%global build_kaspersky 0 -%global build_mks 0 -%global build_nai 0 -%global build_openav 0 -%global build_sophos 0 -%global build_symantec 0 -%global build_trend 0 -%if %build_vscan -# These we build by default -%global build_clamav 1 -%global build_icap 1 -%endif -%if %build_vscan && %build_scanners -# These scanners are built if scanners are selected -# symantec requires their library present and must be selected -# individually -%global build_fprot 1 -%global build_fsav 1 -%global build_kaspersky 1 -%global build_mks 1 -%global build_nai 1 -%global build_openav 1 -%global build_sophos 1 -%global build_trend 1 -%endif -%if %build_vscan -%{?_with_fprot: %{expand: %%global build_fprot 1}} -%{?_with_kaspersky: %{expand: %%global build_kaspersky 1}} -%{?_with_mks: %{expand: %%global build_mks 1}} -%{?_with_openav: %{expand: %%global build_openav 1}} -%{?_with_sophos: %{expand: %%global build_sophos 1}} -#%{?_with_symantec: %{expand: %%global build_symantec 1}} -%{?_with_trend: %{expand: %%global build_trend 1}} -%global vscandir samba-vscan-%{vscanver} -%endif -%global vfsdir examples.bin/VFS - -#Standard texts for descriptions: -%define message_bugzilla() %(echo -e -n "Please file bug reports for this package at Mandrake bugzilla \\n(http://qa.mandrakesoft.com) under the product name %{1}") -%define message_system %(echo -e -n "NOTE: These packages of samba-%{version}, are provided, parallel installable\\nwith samba-2.2.x, to allow easy migration from samba-2.2.x to samba-%{version},\\nbut are not officially supported") - -#check gcc version to disable some optimisations on gcc-3.3.1 -%define gcc331 %(gcc -dumpversion|awk '{if ($1>3.3) print 1; else print 0}') - -#Define sets of binaries that we can use in globs and loops: -%global commonbin net,ntlm_auth,rpcclient,smbcacls,smbcquotas,smbpasswd,smbtree,testparm,testprns - -%global serverbin editreg,pdbedit,profiles,smbcontrol,smbstatus,tdbbackup,tdbdump -%global serversbin nmbd,samba,smbd,mkntpwd - -%global clientbin findsmb,nmblookup,smbclient,smbmnt,smbmount,smbprint,smbspool,smbtar,smbumount,smbget -%global client_bin mount.cifs -%global client_sbin mount.smb,mount.smbfs - -%global testbin debug2html,smbtorture,msgtest,masktest,locktest,locktest2,nsstest,vfstest - -%ifarch alpha -%define build_expsam xml -%else -%define build_expsam mysql,xml,pgsql -%endif - -#Workaround missing macros in 8.x: -%{!?perl_vendorlib: %{expand: %%global perl_vendorlib %{perl_sitearch}/../}} - -# Determine whether this is the system samba or not. -%if %build_system -%define samba_major %{nil} -%else -%define samba_major 3 -%endif -# alternatives_major is %{nil} if we aren't system and not using alternatives -%if !%build_system || %build_alternatives -%define alternative_major 3 -%else -%define alternative_major %{nil} -%endif - -Summary: Samba SMB server. -Name: %{pkg_name}%{samba_major} - -%if %have_pre -Version: %{pre_ver} -%else -Version: %{source_ver} -%endif - -%if %have_prelease && !%have_pre -Release: 0.%{prelease}.%{rel} -%endif -%if %have_prelease && %have_pre -Release: 0.%{pre_pre}.%{rel} -%endif -%if !%have_prelease && !%have_pre -Release: %{rel} -%endif -%if !%have_prelease && %have_pre -Release: 0.%{pre_pre}.%{rel} -%endif - -License: GPL -Group: System/Servers -Source: ftp://samba.org/pub/samba/samba-%{source_ver}.tar.bz2 -URL: http://www.samba.org -Source1: samba.log -Source3: samba.xinetd -Source4: swat_48.png.bz2 -Source5: swat_32.png.bz2 -Source6: swat_16.png.bz2 -Source7: README.%{name}-mandrake-rpm -%if %build_vscan -Source8: samba-vscan-%{vscanver}.tar.bz2 -%endif -%if %build_vscan && %mdkversion >= 920 -BuildRequires: file-devel -%endif -Source10: samba-print-pdf.sh.bz2 -Source11: smb-migrate.bz2 -Patch1: smbw.patch.bz2 -Patch4: samba-3.0-smbmount-sbin.patch.bz2 -Patch5: samba-3.0.2a-smbldap-config.patch.bz2 -%if !%have_pversion -# Version specific patches: current version -Patch7: samba-3.0.5-lib64.patch.bz2 -Patch9: samba-3.0.6-smbmount-unixext.patch.bz2 -Patch11: samba-3.0.7-mandrake-packaging.patch.bz2 -%else -# Version specific patches: upcoming version -Patch8: samba-3.0.6-revert-libsmbclient-move.patch.bz2 -%endif -# Limbo patches (applied to prereleases, but not preleases, ie destined for -# samba CVS) -%if %have_pversion && %have_pre -%endif -Requires: pam >= 0.64, samba-common = %{version} -BuildRequires: pam-devel readline-devel libncurses-devel popt-devel -BuildRequires: libxml2-devel postgresql-devel -%ifnarch alpha -BuildRequires: mysql-devel -%endif -%if %build_acl -BuildRequires: libacl-devel -%endif -%if %build_mdk72 -BuildRequires: cups-devel -%else -BuildRequires: libcups-devel -%endif -BuildRequires: libldap-devel -%if %build_ads -BuildRequires: libldap-devel krb5-devel -%endif -BuildRoot: %{_tmppath}/%{name}-%{version}-root -Prefix: /usr -Prereq: /sbin/chkconfig /bin/mktemp /usr/bin/killall -Prereq: fileutils sed /bin/grep - -%description -Samba provides an SMB server which can be used to provide -network services to SMB (sometimes called "Lan Manager") -clients, including various versions of MS Windows, OS/2, -and other Linux machines. Samba also provides some SMB -clients, which complement the built-in SMB filesystem -in Linux. Samba uses NetBIOS over TCP/IP (NetBT) protocols -and does NOT need NetBEUI (Microsoft Raw NetBIOS frame) -protocol. - -Samba-3.0 features working NT Domain Control capability and -includes the SWAT (Samba Web Administration Tool) that -allows samba's smb.conf file to be remotely managed using your -favourite web browser. For the time being this is being -enabled on TCP port 901 via xinetd. SWAT is now included in -it's own subpackage, samba-swat. - -Please refer to the WHATSNEW.txt document for fixup information. -This binary release includes encrypted password support. - -Please read the smb.conf file and ENCRYPTION.txt in the -docs directory for implementation details. -%if %have_pversion -%message_bugzilla samba3 -%endif -%if !%build_system -%message_system -%endif -%if %build_non_default -WARNING: This RPM was built with command-line options. Please -see README.%{name}-mandrake-rpm in the documentation for -more information. -%endif - -%package server -URL: http://www.samba.org -Summary: Samba (SMB) server programs. -Requires: %{name}-common = %{version} -%if %have_rpmhelper -PreReq: rpm-helper -%endif -Group: Networking/Other -%if %build_system -Provides: samba -Obsoletes: samba -Provides: samba-server-ldap -Obsoletes: samba-server-ldap -Provides: samba3-server -Obsoletes: samba3-server -%else -#Provides: samba-server -%endif - -%description server -Samba-server provides a SMB server which can be used to provide -network services to SMB (sometimes called "Lan Manager") -clients. Samba uses NetBIOS over TCP/IP (NetBT) protocols -and does NOT need NetBEUI (Microsoft Raw NetBIOS frame) -protocol. - -Samba-3.0 features working NT Domain Control capability and -includes the SWAT (Samba Web Administration Tool) that -allows samba's smb.conf file to be remotely managed using your -favourite web browser. For the time being this is being -enabled on TCP port 901 via xinetd. SWAT is now included in -it's own subpackage, samba-swat. - -Please refer to the WHATSNEW.txt document for fixup information. -This binary release includes encrypted password support. - -Please read the smb.conf file and ENCRYPTION.txt in the -docs directory for implementation details. -%if %have_pversion -%message_bugzilla samba3-server -%endif -%if !%build_system -%message_system -%endif - -%package client -URL: http://www.samba.org -Summary: Samba (SMB) client programs. -Group: Networking/Other -Requires: %{name}-common = %{version} -%if %build_alternatives -#Conflicts: samba-client < 2.2.8a-9mdk -%endif -%if %build_system -Provides: samba3-client -Obsoletes: samba3-client -Obsoletes: smbfs -%else -#Provides: samba-client -%endif -%if !%build_system && %build_alternatives -Provides: samba-client -%endif - -%description client -Samba-client provides some SMB clients, which complement the built-in -SMB filesystem in Linux. These allow the accessing of SMB shares, and -printing to SMB printers. -%if %have_pversion -%message_bugzilla samba3-client -%endif -%if !%build_system -%message_system -%endif - -%package common -URL: http://www.samba.org -Summary: Files used by both Samba servers and clients. -Group: System/Servers -%if %build_system -Provides: samba-common-ldap -Obsoletes: samba-common-ldap -Provides: samba3-common -Obsoletes: samba3-common -%else -#Provides: samba-common -%endif - -%description common -Samba-common provides files necessary for both the server and client -packages of Samba. -%if %have_pversion -%message_bugzilla samba3-common -%endif -%if !%build_system -%message_system -%endif - -%package doc -URL: http://www.samba.org -Summary: Documentation for Samba servers and clients. -Group: System/Servers -Requires: %{name}-common = %{version} -%if %build_system -Obsoletes: samba3-doc -Provides: samba3-doc -%else -#Provides: samba-doc -%endif - -%description doc -Samba-doc provides documentation files for both the server and client -packages of Samba. -%if %have_pversion -%message_bugzilla samba3-doc -%endif -%if !%build_system -%message_system -%endif - -%package swat -URL: http://www.samba.org -Summary: The Samba Web Administration Tool. -Requires: %{name}-server = %{version} -Requires: xinetd -Group: System/Servers -%if %build_system -Provides: samba-swat-ldap -Obsoletes: samba-swat-ldap -Provides: samba3-swat -Obsoletes: samba3-swat -%else -#Provides: samba-swat -%endif - -%description swat -SWAT (the Samba Web Administration Tool) allows samba's smb.conf file -to be remotely managed using your favourite web browser. For the time -being this is being enabled on TCP port 901 via xinetd. Note that -SWAT does not use SSL encryption, nor does it preserve comments in -your smb.conf file. Webmin uses SSL encryption by default, and -preserves comments in configuration files, even if it does not display -them, and is therefore the preferred method for remotely managing -Samba. -%if %have_pversion -%message_bugzilla samba3-swat -%endif -%if !%build_system -%message_system -%endif - -%if %build_winbind -%package winbind -URL: http://www.samba.org -Summary: Samba-winbind daemon, utilities and documentation -Group: System/Servers -Requires: %{name}-common = %{version} -%endif -%if %build_winbind && !%build_system -Conflicts: samba-winbind -%endif -%if %build_winbind -%description winbind -Provides the winbind daemon and testing tools to allow authentication -and group/user enumeration from a Windows or Samba domain controller. -%endif -%if %have_pversion -%message_bugzilla samba3-winbind -%endif -%if !%build_system -%message_system -%endif - -%if %build_wins -%package -n nss_wins%{samba_major} -URL: http://www.samba.org -Summary: Name Service Switch service for WINS -Group: System/Servers -Requires: %{name}-common = %{version} -PreReq: glibc -%endif -%if %build_wins && !%build_system -Conflicts: nss_wins -%endif -%if %build_wins -%description -n nss_wins%{samba_major} -Provides the libnss_wins shared library which resolves NetBIOS names to -IP addresses. -%endif -%if %have_pversion -%message_bugzilla nss_wins3 -%endif -%if !%build_system -%message_system -%endif - -%if %{?_with_test:1}%{!?_with_test:0} -%package test -URL: http://www.samba.org -Summary: Debugging and benchmarking tools for samba -Group: System/Servers -Requires: %{name}-common = %{version} -%endif -%if %build_system && %{?_with_test:1}%{!?_with_test:0} -Provides: samba3-test samba3-debug -Obsoletes: samba3-test samba3-debug -%endif -%if !%build_system && %{?_with_test:1}%{!?_with_test:0} -Provides: samba-test samba3-debug -Obsoletes: samba3-debug -%endif -%if %{?_with_test:1}%{!?_with_test:0} - -%description test -This package provides tools for benchmarking samba, and debugging -the correct operation of tools against smb servers. -%endif - -%if %build_system -%package -n %{libname} -URL: http://www.samba.org -Summary: SMB Client Library -Group: System/Libraries -Provides: libsmbclient - -%description -n %{libname} -This package contains the SMB client library, part of the samba -suite of networking software, allowing other software to access -SMB shares. -%endif -%if %have_pversion && %build_system -%message_bugzilla %{libname} -%endif - -%if %build_system -%package -n %{libname}-devel -URL: http://www.samba.org -Summary: SMB Client Library Development files -Group: Development/C -Provides: libsmbclient-devel -Requires: %{libname} = %{version}-%{release} - -%description -n %{libname}-devel -This package contains the development files for the SMB client -library, part of the samba suite of networking software, allowing -the development of other software to access SMB shares. -%endif -%if %have_pversion && %build_system -%message_bugzilla %{libname}-devel -%endif - -%if %build_system -%package -n %{libname}-static-devel -URL: http://www.samba.org -Summary: SMB Client Static Library Development files -Group: System/Libraries -Provides: libsmbclient-static-devel = %{version}-%{release} -Requires: %{libname}-devel = %{version}-%{release} - -%description -n %{libname}-static-devel -This package contains the static development files for the SMB -client library, part of the samba suite of networking software, -allowing the development of other software to access SMB shares. -%endif -%if %have_pversion && %build_system -%message_bugzilla %{libname}-devel -%endif - -#%package passdb-ldap -#URL: http://www.samba.org -#Summary: Samba password database plugin for LDAP -#Group: System/Libraries -# -#%description passdb-ldap -#The passdb-ldap package for samba provides a password database -#backend allowing samba to store account details in an LDAP -#database -#_if %have_pversion -#_message_bugzilla samba3-passdb-ldap -#_endif -#_if !%build_system -#_message_system -#_endif - -%ifnarch alpha -%package passdb-mysql -URL: http://www.samba.org -Summary: Samba password database plugin for MySQL -Group: System/Libraries -Requires: %{name}-server = %{version}-%{release} -%endif -%ifnarch alpha && %build_system -Obsoletes: samba3-passdb-mysql -Provides: samba3-passdb-mysql -%endif -%ifnarch alpha - -%description passdb-mysql -The passdb-mysql package for samba provides a password database -backend allowing samba to store account details in a MySQL -database -%endif - -#does postgresql build on alpha? -#ifnarch alpha -%package passdb-pgsql -URL: http://www.samba.org -Summary: Samba password database plugin for PostgreSQL -Group: System/Libraries -Requires: %{name}-server = %{version}-%{release} -#endif -#ifnarch alpha && %build_system -%if %build_system -Obsoletes: samba3-passdb-pgsql -Provides: samba3-passdb-pgsql -%endif -#ifnarch alpha - -%description passdb-pgsql -The passdb-pgsql package for samba provides a password database -backend allowing samba to store account details in a PostgreSQL -database -#endif - -%package passdb-xml -URL: http://www.samba.org -Summary: Samba password database plugin for XML files -Group: System/Libraries -Requires: %{name}-server = %{version}-%{release} -%if %build_system -Obsoletes: samba3-passdb-xml -Provides: samba3-passdb-xml -%endif - -%description passdb-xml -The passdb-xml package for samba provides a password database -backend allowing samba to store account details in XML files. -%if %have_pversion -%message_bugzilla samba3-passdb-xml -%endif -%if !%build_system -%message_system -%endif - -#Antivirus packages: -%if %build_clamav -%package vscan-clamav -Summary: On-access virus scanning for samba using Clam Antivirus -Group: System/Servers -Requires: %{name}-server = %{version} -Provides: %{name}-vscan -Requires: clamd -%description vscan-clamav -A vfs-module for samba to implement on-access scanning using the -Clam antivirus scanner daemon. -%endif - -%if %build_fprot -%package vscan-fprot -Summary: On-access virus scanning for samba using FPROT -Group: System/Servers -Requires: %{name}-server = %{version} -Provides: %{name}-vscan -%description vscan-fprot -A vfs-module for samba to implement on-access scanning using the -FPROT antivirus software (which must be installed to use this). -%endif - -%if %build_fsav -%package vscan-fsecure -Summary: On-access virus scanning for samba using F-Secure -Group: System/Servers -Requires: %{name}-server = %{version} -Provides: %{name}-vscan -%description vscan-fsecure -A vfs-module for samba to implement on-access scanning using the -F-Secure antivirus software (which must be installed to use this). -%endif - -%if %build_icap -%package vscan-icap -Summary: On-access virus scanning for samba using Clam Antivirus -Group: System/Servers -Requires: %{name}-server = %{version} -Provides: %{name}-icap -%description vscan-icap -A vfs-module for samba to implement on-access scanning using -ICAP-capable antivirus software. -%endif - -%if %build_kaspersky -%package vscan-kaspersky -Summary: On-access virus scanning for samba using Kaspersky -Group: System/Servers -Requires: %{name}-server = %{version} -Provides: %{name}-vscan -%description vscan-kaspersky -A vfs-module for samba to implement on-access scanning using the -Kaspersky antivirus software (which must be installed to use this). -%endif - -%if %build_mks -%package vscan-mks -Summary: On-access virus scanning for samba using MKS -Group: System/Servers -Requires: %{name}-server = %{version} -Provides: %{name}-vscan -%description vscan-mks -A vfs-module for samba to implement on-access scanning using the -MKS antivirus software (which must be installed to use this). -%endif - -%if %build_nai -%package vscan-nai -Summary: On-access virus scanning for samba using NAI McAfee -Group: System/Servers -Requires: %{name}-server = %{version} -Provides: %{name}-vscan -%description vscan-nai -A vfs-module for samba to implement on-access scanning using the -NAI McAfee antivirus software (which must be installed to use this). -%endif - -%if %build_openav -%package vscan-openav -Summary: On-access virus scanning for samba using OpenAntivirus -Group: System/Servers -Requires: %{name}-server = %{version} -Provides: %{name}-vscan -%description vscan-openav -A vfs-module for samba to implement on-access scanning using the -OpenAntivirus antivirus software (which must be installed to use this). -%endif - -%if %build_sophos -%package vscan-sophos -Summary: On-access virus scanning for samba using Sophos -Group: System/Servers -Requires: %{name}-server = %{version} -Provides: %{name}-vscan -%description vscan-sophos -A vfs-module for samba to implement on-access scanning using the -Sophos antivirus software (which must be installed to use this). -%endif - -%if %build_symantec -%package vscan-symantec -Summary: On-access virus scanning for samba using Symantec -Group: System/Servers -Requires: %{name}-server = %{version} -Provides: %{name}-vscan -Autoreq: 0 -%description vscan-symantec -A vfs-module for samba to implement on-access scanning using the -Symantec antivirus software (which must be installed to use this). -%endif - - -%if %build_trend -%package vscan-trend -Summary: On-access virus scanning for samba using Trend -Group: System/Servers -Requires: %{name}-server = %{version} -Provides: %{name}-vscan -%description vscan-trend -A vfs-module for samba to implement on-access scanning using the -Trend antivirus software (which must be installed to use this). -%endif - -%prep - -# Allow users to query build options with --with options: -#%define opt_status(%1) %(echo %{1}) -%if %{?_with_options:1}%{!?_with_options:0} -%define opt_status(%{1}) %(if [ %{1} -eq 1 ];then echo enabled;else echo disabled;fi) -#exit 1 -%{error: } -%{error:Build options available are:} -%{error:--with[out] system Build as the system samba package [or as samba3]} -%{error:--with[out] acl Build with support for file ACLs - %opt_status %build_acl} -%{error:--with[out] winbind Build with Winbind support - %opt_status %build_winbind} -%{error:--with[out] wins Build with WINS name resolution support - %opt_status %build_wins} -%{error:--with[out] ldap Build with legacy (samba2) LDAP support - %opt_status %build_ldap} -%{error:--with[out] ads Build with Active Directory support - %opt_status %build_ads} -%{error:--with[out] scanners Enable on-access virus scanners - %opt_status %build_scanners} -%{error: } -%else -%{error: } -%{error: This rpm has build options available, use --with options to see them} -%{error: } -%endif - -%if %{?_with_options:1}%{!?_with_options:0} && %build_scanners -#{error:--with scanners enables the following:%{?build_clamav:clamav,}%{?build_icap:icap,}%{?build_fprot:fprot,}%{?build_mks:mks,}%{?build_openav:openav,}%{?build_sophos:sophos,}%{?build_symantec:symantec,}%{?build_trend:trend}} -%{error:--with scanners enables the following: clamav,icap,fprot,fsav,mks,nai,openav,sophos,trend} -%{error: } -%{error:To enable others (requires development libraries for the scanner):} -%{error:--with symantec Enable on-access scanning with Symantec - %opt_status %build_symantec} -%{error: } -%endif - -%if %{?_with_options:1}%{!?_with_options:0} -clear -exit 1 -%endif - - -%if %build_non_default -RPM_EXTRA_OPTIONS="\ -%{?_with_system: --with system}\ -%{?_without_system: --without system}\ -%{?_with_acl: --with acl}\ -%{?_without_acl: --without acl}\ -%{?_with_winbind: --with winbind}\ -%{?_without_winbind: --without winbind}\ -%{?_with_wins: --with wins}\ -%{?_without_wins: --without wins}\ -%{?_with_ldap: --with ldap}\ -%{?_without_ldap: --without ldap}\ -%{?_with_ads: --with ads}\ -%{?_without_ads: --without ads}\ -%{?_with_scanners: --with scanners}\ -%{?_without_scanners: --without scanners}\ -" -echo "Building a non-default rpm with the following command-line arguments:" -echo "$RPM_EXTRA_OPTIONS" -echo "This rpm was built with non-default options, thus, to build ">%{SOURCE7} -echo "an identical rpm, you need to supply the following options">>%{SOURCE7} -echo "at build time: $RPM_EXTRA_OPTIONS">>%{SOURCE7} -echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7} -%else -echo "This rpm was built with default options">%{SOURCE7} -echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7} -%endif - -%if %build_vscan -%setup -q -a 8 -n %{pkg_name}-%{source_ver} -%else -%setup -q -n %{pkg_name}-%{source_ver} -%endif -#%patch111 -p1 -%patch1 -p1 -b .smbw -%patch4 -p1 -b .sbin -%patch5 -p1 -# Version specific patches: current version -%if !%have_pversion -echo "Applying patches for current version: %{ver}" -#%patch7 -p1 -b .lib64 -%patch9 -p1 -b .unixext -#%patch10 -p1 -b .rpcclient-libs -%patch11 -p1 -b .mdk -%else -# Version specific patches: upcoming version -echo "Applying patches for new versions: %{pversion}" -%patch8 -p1 -b .libsmbdir -%endif - -# Limbo patches -%if %have_pversion && %have_pre -echo "Appling patches which should only be applied to prereleases" -%endif - -# Fix quota compilation in glibc>2.3 -%if %mdkversion >= 910 && %mdkversion < 1000 -#grep "<linux/quota.h>" source/smbd/quotas.c >/dev/null && \ -perl -pi -e 's@<linux/quota.h>@<sys/quota.h>@' source/smbd/quotas.c -%endif - -cp %{SOURCE7} . - -# Make a copy of examples so that we have a clean one for doc: -cp -a examples examples.bin - -%if %build_vscan -cp -a %{vscandir} %{vfsdir} -#fix stupid directory names: -#mv %{vfsdir}/%{vscandir}/openantivirus %{vfsdir}/%{vscandir}/oav -# Inline replacement of config dir -for av in clamav fprotd fsav icap kavp mksd mcdaemon oav sophos symantec trend - do - [ -e %{vfsdir}/%{vscandir}/*/vscan-$av.h ] && perl -pi -e \ - 's,^#define PARAMCONF "/etc/samba,#define PARAMCONF "/etc/%{name},' \ - %{vfsdir}/%{vscandir}/*/vscan-$av.h -done -#Inline edit vscan header: -perl -pi -e 's/^# define SAMBA_VERSION_MAJOR 2/# define SAMBA_VERSION_MAJOR 3/g;s/# define SAMBA_VERSION_MINOR 2/# define SAMBA_VERSION_MINOR 0/g' %{vfsdir}/%{vscandir}/include/vscan-global.h -%endif - -# Edit some files when not building system samba: -%if !%build_system -perl -pi -e 's/%{pkg_name}/%{name}/g' source/auth/pampass.c -%endif - -#remove cvs internal files from docs: -find docs examples -name '.cvsignore' -exec rm -f {} \; - -#make better doc trees: -chmod -R a+rX examples docs *Manifest* README Roadmap COPYING -mkdir -p clean-docs/samba-doc -cp -a examples docs clean-docs/samba-doc -mv -f clean-docs/samba-doc/examples/libsmbclient clean-docs/ -rm -Rf clean-docs/samba-doc/docs/{docbook,manpages,htmldocs,using_samba} -ln -s %{_datadir}/swat%{samba_major}/using_samba/ clean-docs/samba-doc/docs/using_samba -ln -sf %{_datadir}/swat%{samba_major}/help/ clean-docs/samba-doc/docs/htmldocs - -%build -#%serverbuild -(cd source -CFLAGS=`echo "$RPM_OPT_FLAGS"|sed -e 's/-g//g'` -%if %gcc331 -CFLAGS=`echo "$CFLAGS"|sed -e 's/-O2/-O/g'` -%endif -./autogen.sh -# Don't use --with-fhs now, since it overrides libdir, it sets configdir, -# lockdir,piddir logfilebase,privatedir and swatdir -%configure --prefix=%{_prefix} \ - --sysconfdir=%{_sysconfdir}/%{name} \ - --localstatedir=/var \ - --with-libdir=%{_libdir}/%{name} \ - --with-privatedir=%{_sysconfdir}/%{name} \ - --with-lockdir=/var/cache/%{name} \ - --with-piddir=/var/run \ - --with-swatdir=%{_datadir}/swat%{samba_major} \ - --with-configdir=%{_sysconfdir}/%{name} \ - --with-logfilebase=/var/log/%{name} \ -%if !%build_ads - --with-ads=no \ -%endif - --with-automount \ - --with-smbmount \ - --with-pam \ - --with-pam_smbpass \ -%if %build_ldap - --with-ldapsam \ -%endif - --with-tdbsam \ - --with-syslog \ - --with-quotas \ - --with-utmp \ - --with-manpages-langs=en \ -%if %build_acl - --with-acl-support \ -%endif - --disable-mysqltest \ - --with-expsam=%build_expsam \ - --program-suffix=%{samba_major} -# --with-shared-modules=pdb_ldap,idmap_ldap \ -# --with-manpages-langs=en,ja,pl \ -#_if !%build_system -# --with-smbwrapper \ -#_endif -# --with-nisplussam \ -# --with-fhs \ - -#Fix the make file so we don't create debug information on 9.2 -%if %mdkversion == 920 -perl -pi -e 's/-g //g' Makefile -%endif - -perl -pi -e 's|-Wl,-rpath,%{_libdir}||g;s|-Wl,-rpath -Wl,%{_libdir}||g' Makefile - -make proto_exists -%make all libsmbclient smbfilter wins modules %{?_with_test: torture debug3html bin/log2pcap} bin/editreg bin/smbget client/mount.cifs - -) - -# Build mkntpasswd in examples/LDAP/ for smbldaptools -make -C examples.bin/LDAP/smbldap-tools/mkntpwd - -%if %build_vscan -echo -e "\n\nBuild antivirus VFS modules\n\n" -pushd %{vfsdir}/%{vscandir} -%configure -#sed -i -e 's,openantivirus,oav,g' Makefile -sed -i -e 's,^\(.*clamd socket name.*=\).*,\1 /var/lib/clamav/clamd.socket,g' clamav/vscan-clamav.conf -make -popd -%endif - -# Build antivirus vfs objects -%if %build_symantec -echo "Building Symantec" -make -C %{vfsdir}/%{vscandir} symantec -%endif - -%install -rm -rf $RPM_BUILD_ROOT -mkdir -p $RPM_BUILD_ROOT - -#Ensure all docs are readable -chmod a+r docs -R - -# Any entries here mean samba makefile is *really* broken: -mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/%{name} -mkdir -p $RPM_BUILD_ROOT/%{_datadir} -mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs - -(cd source -make DESTDIR=$RPM_BUILD_ROOT LIBDIR=%{_libdir}/%{name} MANDIR=%{_mandir} install installclientlib installmodules) - -install -m755 source/bin/{editreg,smbget} %{buildroot}/%{_bindir} - -#need to stay -mkdir -p $RPM_BUILD_ROOT/{sbin,bin} -mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/{logrotate.d,pam.d,xinetd.d} -mkdir -p $RPM_BUILD_ROOT/%{_initrddir} -mkdir -p $RPM_BUILD_ROOT/var/cache/%{name} -mkdir -p $RPM_BUILD_ROOT/var/log/%{name} -mkdir -p $RPM_BUILD_ROOT/var/run/%{name} -mkdir -p $RPM_BUILD_ROOT/var/spool/%{name} -mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/{netlogon,profiles,printers} -mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/printers/{W32X86,WIN40,W32ALPHA,W32MIPS,W32PPC} -mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/codepages/src -mkdir -p $RPM_BUILD_ROOT/%{_lib}/security -mkdir -p $RPM_BUILD_ROOT%{_libdir} -mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs -mkdir -p $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts - -#smbwrapper and pam_winbind not handled by make, pam_smbpass.so doesn't build -#install -m 755 source/bin/smbwrapper.so $RPM_BUILD_ROOT%{_libdir}/smbwrapper%{samba_major}.so -install -m 755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/%{_lib}/security/pam_smbpass%{samba_major}.so -install -m 755 source/nsswitch/pam_winbind.so $RPM_BUILD_ROOT/%{_lib}/security/pam_winbind.so - -install -m755 source/bin/libsmbclient.a $RPM_BUILD_ROOT%{_libdir}/libsmbclient.a -pushd $RPM_BUILD_ROOT/%{_libdir} -[ -f libsmbclient.so ] && mv -f libsmbclient.so libsmbclient.so.%{libsmbmajor} -ln -sf libsmbclient.so.%{libsmbmajor} libsmbclient.so -popd - -# smbsh forgotten -#install -m 755 source/bin/smbsh $RPM_BUILD_ROOT%{_bindir}/ - -%if %build_vscan -%makeinstall_std -C %{vfsdir}/%{vscandir} -install -m 644 %{vfsdir}/%{vscandir}/*/vscan-*.conf %{buildroot}/%{_sysconfdir}/%{name} -%endif - -#libnss_* not handled by make: -# Install the nsswitch library extension file -for i in wins winbind; do - install -m755 source/nsswitch/libnss_${i}.so $RPM_BUILD_ROOT/%{_lib}/libnss_${i}.so -done -# Make link for wins and winbind resolvers -( cd $RPM_BUILD_ROOT/%{_lib}; ln -s libnss_wins.so libnss_wins.so.2; ln -s libnss_winbind.so libnss_winbind.so.2) - -%if %{?_with_test:1}%{!?_with_test:0} -for i in {%{testbin}};do - install -m755 source/bin/${i} $RPM_BUILD_ROOT/%{_bindir}/${i}%{samba_major} -done -%endif - -# Install other stuff - -# install -m644 examples/VFS/recycle/recycle.conf $RPM_BUILD_ROOT%{_sysconfdir}/samba/ - install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/smbusers - install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT/%{_bindir} - #install -m755 packaging/RedHat/smbadduser $RPM_BUILD_ROOT/usr/bin - install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT/%{_bindir} - install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_initrddir}/smb%{samba_major} - install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_sbindir}/%{name} - install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_initrddir}/winbind -# install -m755 packaging/Mandrake/wrepld.init $RPM_BUILD_ROOT/%{_initrddir}/wrepld%{samba_major} - install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_sbindir}/winbind - install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/%{name} - install -m644 packaging/Mandrake/system-auth-winbind.pamd $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/system-auth-winbind -# - install -m644 %{SOURCE1} $RPM_BUILD_ROOT/%{_sysconfdir}/logrotate.d/%{name} -# install -m644 packaging/Mandrake/samba-slapd-include.conf $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/samba-slapd.include - -# Install smbldap-tools scripts: -for i in examples/LDAP/smbldap-tools/*.pl; do - install -m 750 $i $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ - ln -s %{_datadir}/%{name}/scripts/`basename $i` $RPM_BUILD_ROOT/%{_bindir}/`basename $i|sed -e 's/\.pl//g'`%{samba_major} -done - -install -m 750 examples/LDAP/smbldap-tools/smbldap_tools.pm $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ - -# The conf file -install -m 640 examples/LDAP/smbldap-tools/smbldap_conf.pm $RPM_BUILD_ROOT/%{_sysconfdir}/%{name} - -#Fix the smbldap-tools when not system samba: -%if !%build_system -perl -pi -e 's/^(use|package)(\s+)smbldap_(\w+);$/${1}${2}smbldap_${3}%{samba_major};/g' \ -%{buildroot}/%{_sysconfdir}/%{name}/smbldap_conf.pm \ -%{buildroot}/%{_datadir}/%{name}/scripts/smbldap*.p? -perl -pi -e 's,/usr/local/sbin/mkntpwd,/usr/sbin/mkntpwd%{samba_major},g;s,553,421,g' %{buildroot}/%{_sysconfdir}/%{name}/smbldap_conf.pm -perl -pi -e 's,\$smbldap_conf::SID,\$smbldap_conf3::SID,g' %{buildroot}/%{_datadir}/%{name}/scripts/smbldap*.p? -%endif -perl -pi -e 's,/usr/local/sbin/smbldap-passwd.pl,%{_datadir}/%{name}/scripts/smbldap-passwd.pl,g' %{buildroot}/%{_datadir}/%{name}/scripts/smbldap-useradd.pl - -# Link both smbldap*.pm into vendor-perl (any better ideas?) -mkdir -p %{buildroot}/%{perl_vendorlib} -ln -s %{_sysconfdir}/%{name}/smbldap_conf.pm $RPM_BUILD_ROOT/%{perl_vendorlib}/smbldap_conf%{samba_major}.pm -ln -s %{_datadir}/%{name}/scripts/smbldap_tools.pm $RPM_BUILD_ROOT/%{perl_vendorlib}/smbldap_tools%{samba_major}.pm -#mkntpwd -install -m750 examples.bin/LDAP/smbldap-tools/mkntpwd/mkntpwd %{buildroot}/%{_sbindir}/mkntpwd%{samba_major} - -# Samba smbpasswd migration script: -install -m755 examples/LDAP/convertSambaAccount $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/ - -# make a conf file for winbind from the default one: - cat packaging/Mandrake/smb.conf|sed -e 's/^; winbind/ winbind/g;s/^; obey pam/ obey pam/g; s/^; printer admin = @"D/ printer admin = @"D/g;s/^; password server = \*/ password server = \*/g;s/^; template/ template/g; s/^ security = user/ security = domain/g' > packaging/Mandrake/smb-winbind.conf - install -m644 packaging/Mandrake/smb-winbind.conf $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb-winbind.conf - -# Some inline fixes for smb.conf for non-winbind use -install -m644 packaging/Mandrake/smb.conf $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf -cat packaging/Mandrake/smb.conf | \ -sed -e 's/^; printer admin = @adm/ printer admin = @adm/g' >$RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf -%if %build_cupspc -perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf -perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb-winbind.conf -%endif - -#%if !%build_system -# Fix script paths in smb.conf -#perl -pi -e 's,%{_datadir}/samba,%{_datadir}/%{name},g' %{buildroot}/%{_sysconfdir}/%{name}/smb*.conf -#%endif - - -#install mount.cifs -install -m755 source/client/mount.cifs %{buildroot}/bin/mount.cifs%{samba_major} - - echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/lmhosts - -# Link smbspool to CUPS (does not require installed CUPS) - - mkdir -p $RPM_BUILD_ROOT/%{_libdir}/cups/backend - ln -s %{_bindir}/smbspool%{alternative_major} $RPM_BUILD_ROOT/%{_libdir}/cups/backend/smb%{alternative_major} - -# xinetd support - - mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d - install -m644 %{SOURCE3} $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d/swat%{samba_major} - -# menu support - -mkdir -p $RPM_BUILD_ROOT%{_menudir} -cat > $RPM_BUILD_ROOT%{_menudir}/%{name}-swat << EOF -?package(%{name}-swat):\ -command="gnome-moz-remote http://localhost:901/" \ -needs="gnome" \ -icon="swat%{samba_major}.png" \ -section="Configuration/Networking" \ -title="Samba Configuration (SWAT)" \ -longtitle="The Swat Samba Administration Tool" -?package(%{name}-swat):\ -command="sh -c '\$BROWSER http://localhost:901/'" \ -needs="x11" \ -icon="swat%{samba_major}.png" \ -section="Configuration/Networking" \ -title="Samba Configuration (SWAT)" \ -longtitle="The Swat Samba Administration Tool" -EOF - -mkdir -p $RPM_BUILD_ROOT%{_liconsdir} $RPM_BUILD_ROOT%{_iconsdir} $RPM_BUILD_ROOT%{_miconsdir} - -bzcat %{SOURCE4} > $RPM_BUILD_ROOT%{_liconsdir}/swat%{samba_major}.png -bzcat %{SOURCE5} > $RPM_BUILD_ROOT%{_iconsdir}/swat%{samba_major}.png -bzcat %{SOURCE6} > $RPM_BUILD_ROOT%{_miconsdir}/swat%{samba_major}.png - -bzcat %{SOURCE10}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/print-pdf -bzcat %{SOURCE11}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/smb-migrate - -# Fix configs when not building system samba: - -#Client binaries will have suffixes while we use alternatives, even -# if we are system samba -%if !%build_system || %build_alternatives -for OLD in %{buildroot}/%{_bindir}/{%{clientbin}} %{buildroot}/bin/%{client_bin} %{buildroot}/%{_libdir}/cups/backend/smb -do - NEW=`echo ${OLD}%{alternative_major}` - [ -e $OLD ] && mv -f $OLD $NEW -done -for OLD in %{buildroot}/%{_mandir}/man?/{%{clientbin}}* %{buildroot}/%{_mandir}/man?/%{client_bin}* -do - if [ -e $OLD ] - then - BASE=`perl -e '$_="'${OLD}'"; m,(%buildroot)(.*?)(\.[0-9]),;print "$1$2\n";'` - EXT=`echo $OLD|sed -e 's,'${BASE}',,g'` - NEW=`echo ${BASE}%{alternative_major}${EXT}` - mv $OLD $NEW - fi -done -%endif -rm -f %{buildroot}/sbin/mount.smbfs -# Link smbmount to /sbin/mount.smb and /sbin/mount.smbfs -#I don't think it's possible for make to do this ... -(cd $RPM_BUILD_ROOT/sbin - ln -s ..%{_bindir}/smbmount%{alternative_major} mount.smb%{alternative_major} - ln -s ..%{_bindir}/smbmount%{alternative_major} mount.smbfs%{alternative_major} -) -# Server/common binaries are versioned only if not system samba: -%if !%build_system -for OLD in %{buildroot}/%{_bindir}/{%{commonbin}} %{buildroot}/%{_bindir}/{%{serverbin}} %{buildroot}/%{_sbindir}/{%{serversbin},swat} -do - NEW=`echo ${OLD}%{alternative_major}` - mv $OLD $NEW -f ||: -done -# And the man pages too: -for OLD in %{buildroot}/%{_mandir}/man?/{%{commonbin},%{serverbin},%{serversbin},swat,{%testbin},smb.conf,lmhosts}* -do - if [ -e $OLD ] - then - BASE=`perl -e '$_="'${OLD}'"; m,(%buildroot)(.*?)(\.[0-9]),;print "$1$2\n";'` -# BASE=`perl -e '$name="'${OLD}'"; print "",($name =~ /(.*?)\.[0-9]/), "\n";'` - EXT=`echo $OLD|sed -e 's,'${BASE}',,g'` - NEW=`echo ${BASE}%{samba_major}${EXT}` - mv $OLD $NEW - fi -done -# Replace paths in config files and init scripts: -for i in smb ;do - perl -pi -e 's,/subsys/'$i',/subsys/'$i'%{samba_major},g' $RPM_BUILD_ROOT/%{_initrddir}/${i}%{samba_major} -done -for i in %{_sysconfdir}/%{name}/smb.conf %{_initrddir}/smb%{samba_major} %{_sbindir}/%{name} %{_initrddir}/winbind /%{_sysconfdir}/logrotate.d/%{name} /%{_sysconfdir}/xinetd.d/swat%{samba_major} %{_initrddir}/wrepld%{samba_major}; do - perl -pi -e 's,/%{pkg_name},/%{name},g; s,smbd,%{_sbindir}/smbd%{samba_major},g; s,nmbd,%{_sbindir}/nmbd%{samba_major},g; s,/usr/sbin/swat,%{_sbindir}/swat%{samba_major},g;s,wrepld,%{_sbindir}/wrepld%{samba_major},g' $RPM_BUILD_ROOT/$i; -done -# Fix xinetd file for swat: -perl -pi -e 's,/usr/sbin,%{_sbindir},g' $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d/swat%{samba_major} -%endif - -#Clean up unpackaged files: -for i in %{_bindir}/pam_smbpass.so %{_bindir}/smbwrapper.so;do -rm -f %{buildroot}/$i -done - -# (sb) make a smb.conf.clean we can use for the merge, since an existing -# smb.conf won't get overwritten -cp $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf $RPM_BUILD_ROOT/%{_datadir}/%{name}/smb.conf.clean - -# (sb) leave a README.mdk.conf to explain what has been done -cat << EOF > $RPM_BUILD_ROOT/%{_datadir}/%{name}/README.mdk.conf -In order to facilitate upgrading an existing samba install, and merging -previous configuration data with any new syntax used by samba3, a merge -script has attempted to combine your local configuration data with the -new conf file format. The merged data is in smb.conf, with comments like - - # *** merged from original smb.conf: *** - -near the additional entries. Any local shares should have been appended to -smb.conf. A log of what took place should be in: - - /var/log/samba/smb-migrate.log - -A clean samba3 smb.conf is in /usr/share/samba, named smb.conf.clean. -Your original conf should be /etc/samba/smb.conf.tomerge. - -The actual merge script is /usr/share/samba/scripts/smb-migrate. - -Questions/issues: sbenedict@mandrakesoft.com - -EOF - -%clean -rm -rf $RPM_BUILD_ROOT - -%post server - -%_post_service smb%{samba_major} -#%_post_service wrepld%{samba_major} - -# Add a unix group for samba machine accounts -groupadd -frg 421 machines - -# Migrate tdb's from /var/lock/samba (taken from official samba spec file): -for i in /var/lock/samba/*.tdb -do -if [ -f $i ]; then - newname=`echo $i | sed -e's|var\/lock\/samba|var\/cache\/samba|'` - echo "Moving $i to $newname" - mv $i $newname -fi -done - -%post common -# Basic migration script for pre-2.2.1 users, -# since smb config moved from /etc to %{_sysconfdir}/samba - -# Let's create a proper %{_sysconfdir}/samba/smbpasswd file -[ -f %{_sysconfdir}/%{name}/smbpasswd ] || { - echo "Creating password file for samba..." - touch %{_sysconfdir}/%{name}/smbpasswd -} - -# And this too, in case we don't have smbd to create it for us -[ -f /var/cache/%{name}/unexpected.tdb ] || { - touch /var/cache/%{name}/unexpected.tdb -} - -# Let's define the proper paths for config files -perl -pi -e 's/(\/etc\/)(smb)/\1%{name}\/\2/' %{_sysconfdir}/%{name}/smb.conf - -# Fix the logrotate.d file from smb and nmb to smbd and nmbd -if [ -f %{_sysconfdir}/logrotate.d/samba ]; then - perl -pi -e 's/smb /smbd /' %{_sysconfdir}/logrotate.d/samba - perl -pi -e 's/nmb /nmbd /' %{_sysconfdir}/logrotate.d/samba -fi - -# And not loose our machine account SID -[ -f %{_sysconfdir}/MACHINE.SID ] && mv -f %{_sysconfdir}/MACHINE.SID %{_sysconfdir}/%{name}/ ||: - -%triggerpostun common -- samba-common < 3.0.1-3mdk -# (sb) merge any existing smb.conf with new syntax file -if [ $1 = 2 ]; then - # (sb) save existing smb.conf for merge - echo "Upgrade: copy smb.conf to smb.conf.tomerge for merging..." - cp -f %{_sysconfdir}/%{name}/smb.conf %{_sysconfdir}/%{name}/smb.conf.tomerge - echo "Upgrade: merging previous smb.conf..." - if [ -f %{_datadir}/%{name}/smb.conf.clean ]; then - cp %{_datadir}/%{name}/smb.conf.clean %{_sysconfdir}/%{name}/smb.conf - cp %{_datadir}/%{name}/README.mdk.conf %{_sysconfdir}/%{name}/ - %{_datadir}/%{name}/scripts/smb-migrate commit - fi -fi - -%postun common -if [ -f %{_sysconfdir}/%{name}/README.mdk.conf ];then rm -f %{_sysconfdir}/%{name}/README.mdk.conf;fi - -%if %build_winbind -%post winbind -if [ $1 = 1 ]; then - /sbin/chkconfig winbind on - cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmsave - cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmtemp - for i in passwd group;do - grep ^$i %{_sysconfdir}/nsswitch.conf |grep -v 'winbind' >/dev/null - if [ $? = 0 ];then - echo "Adding a winbind entry to the $i section of %{_sysconfdir}/nsswitch.conf" - awk '/^'$i'/ {print $0 " winbind"};!/^'$i'/ {print}' %{_sysconfdir}/nsswitch.conf.rpmtemp >%{_sysconfdir}/nsswitch.conf; - cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmtemp - else - echo "$i entry found in %{_sysconfdir}/nsswitch.conf" - fi - done - if [ -f %{_sysconfdir}/nsswitch.conf.rpmtemp ];then rm -f %{_sysconfdir}/nsswitch.conf.rpmtemp;fi -fi - -%preun winbind -if [ $1 = 0 ]; then - echo "Removing winbind entries from %{_sysconfdir}/nsswitch.conf" - perl -pi -e 's/ winbind//' %{_sysconfdir}/nsswitch.conf - - /sbin/chkconfig winbind reset -fi -%endif %build_winbind - -%if %build_wins -%post -n nss_wins%{samba_major} -if [ $1 = 1 ]; then - cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmsave - grep '^hosts' %{_sysconfdir}/nsswitch.conf |grep -v 'wins' >/dev/null - if [ $? = 0 ];then - echo "Adding a wins entry to the hosts section of %{_sysconfdir}/nsswitch.conf" - awk '/^hosts/ {print $0 " wins"};!/^hosts/ {print}' %{_sysconfdir}/nsswitch.conf.rpmsave >%{_sysconfdir}/nsswitch.conf; - else - echo "wins entry found in %{_sysconfdir}/nsswitch.conf" - fi -# else -# echo "Upgrade, leaving nsswitch.conf intact" -fi - -%preun -n nss_wins%{samba_major} -if [ $1 = 0 ]; then - echo "Removing wins entry from %{_sysconfdir}/nsswitch.conf" - perl -pi -e 's/ wins//' %{_sysconfdir}/nsswitch.conf -#else -# echo "Leaving %{_sysconfdir}/nsswitch.conf intact" -fi -%endif %build_wins - -%preun server - -%_preun_service smb%{samba_major} -#%_preun_service wrepld%{samba_major} - -if [ $1 = 0 ] ; then -# /sbin/chkconfig --level 35 smb reset -# Let's not loose /var/cache/samba - - if [ -d /var/cache/%{name} ]; then - mv -f /var/cache/%{name} /var/cache/%{name}.BAK - fi -fi - -%post swat -if [ -f /var/lock/subsys/xinetd ]; then - service xinetd reload >/dev/null 2>&1 || : -fi -%update_menus - -%postun swat - -# Remove swat entry from xinetd -if [ $1 = 0 -a -f %{_sysconfdir}/xinetd.conf ] ; then -rm -f %{_sysconfdir}/xinetd.d/swat%{samba_major} - service xinetd reload &>/dev/null || : -fi - -if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi - -%clean_menus - -%if %build_system -%post -n %{libname} -p /sbin/ldconfig -%postun -n %{libname} -p /sbin/ldconfig -%endif - -%if %build_alternatives -%post client - -update-alternatives --install %{_bindir}/smbclient smbclient \ -%{_bindir}/smbclient%{alternative_major} 10 \ -$(for i in {/bin/mount.cifs,/sbin/{%{client_sbin}},%{_bindir}/{%{clientbin}}};do -j=`basename $i` -[ "$j" = "smbclient" ] || \ -echo -n " --slave ${i} ${j} ${i}%{alternative_major}";done) \ ---slave %{_libdir}/cups/backend/smb cups_smb %{_libdir}/cups/backend/smb%{alternative_major} || \ -update-alternatives --auto smbclient - -%preun client -[ $1 = 0 ] && update-alternatives --remove smbclient %{_bindir}/smbclient%{alternative_major} ||: -%endif - -%if %build_alternatives -%triggerpostun client -- samba-client, samba2-client -[ ! -e %{_bindir}/smbclient ] && update-alternatives --auto smbclient || : -%endif - -%files server -%defattr(-,root,root) -%(for i in %{_sbindir}/{%{serversbin}}%{samba_major};do echo $i;done) -%(for i in %{_bindir}/{%{serverbin}}%{samba_major};do echo $i;done) -%attr(755,root,root) /%{_lib}/security/pam_smbpass* -%dir %{_libdir}/%{name}/vfs -%{_libdir}/%{name}/vfs/*.so -%if %build_vscan -%exclude %{_libdir}/%{name}/vfs/vscan*.so -%endif -%dir %{_libdir}/%{name}/pdb - -%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smbusers -%attr(-,root,root) %config(noreplace) %{_initrddir}/smb%{samba_major} -#%attr(-,root,root) %config(noreplace) %{_initrddir}/wrepld%{samba_major} -%attr(-,root,root) %config(noreplace) %{_sysconfdir}/logrotate.d/%{name} -%attr(-,root,root) %config(noreplace) %{_sysconfdir}/pam.d/%{name} -#%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/samba-slapd.include -%(for i in %{_mandir}/man?/{%{serverbin},%{serversbin}}%{samba_major}\.[0-9]*;do echo $i|grep -v mkntpwd;done) -%attr(775,root,adm) %dir %{_localstatedir}/%{name}/netlogon -%attr(755,root,root) %dir %{_localstatedir}/%{name}/profiles -%attr(755,root,root) %dir %{_localstatedir}/%{name}/printers -%attr(2775,root,adm) %dir %{_localstatedir}/%{name}/printers/* -%attr(1777,root,root) %dir /var/spool/%{name} -%dir %{_datadir}/%{name} -%dir %{_datadir}/%{name}/scripts -%attr(0755,root,root) %{_datadir}/%{name}/scripts/print-pdf -%attr(0750,root,adm) %{_datadir}/%{name}/scripts/smbldap*.pl -%attr(0750,root,adm) %{_bindir}/smbldap* -%attr(0640,root,adm) %config(noreplace) %{_sysconfdir}/%{name}/smbldap_conf.pm -%attr(0644,root,root) %{_datadir}/%{name}/scripts/smbldap_tools.pm -%{perl_vendorlib}/*.pm -#%attr(0700,root,root) %{_datadir}/%{name}/scripts/*port_smbpasswd.pl -%attr(0755,root,root) %{_datadir}/%{name}/scripts/convertSambaAccount - - -%files doc -%defattr(-,root,root) -%doc README COPYING Manifest Read-Manifest-Now -%doc WHATSNEW.txt Roadmap -%doc README.%{name}-mandrake-rpm -%doc clean-docs/samba-doc/docs -%doc clean-docs/samba-doc/examples -%attr(-,root,root) %{_datadir}/swat%{samba_major}/using_samba/ - -%files swat -%defattr(-,root,root) -%config(noreplace) %{_sysconfdir}/xinetd.d/swat%{samba_major} -#%attr(-,root,root) /sbin/* -%{_sbindir}/swat%{samba_major} -%{_menudir}/%{name}-swat -%{_miconsdir}/*.png -%{_liconsdir}/*.png -%{_iconsdir}/*.png -%attr(-,root,root) %{_datadir}/swat%{samba_major}/help/ -%attr(-,root,root) %{_datadir}/swat%{samba_major}/images/ -%attr(-,root,root) %{_datadir}/swat%{samba_major}/include/ -%lang(ja) %{_datadir}/swat%{samba_major}/lang/ja -%lang(tr) %{_datadir}/swat%{samba_major}/lang/tr -%{_mandir}/man8/swat*.8* -%lang(de) %{_libdir}/%{name}/de.msg -%lang(en) %{_libdir}/%{name}/en.msg -%lang(fr) %{_libdir}/%{name}/fr.msg -%lang(it) %{_libdir}/%{name}/it.msg -%lang(ja) %{_libdir}/%{name}/ja.msg -%lang(nl) %{_libdir}/%{name}/nl.msg -%lang(pl) %{_libdir}/%{name}/pl.msg -%lang(tr) %{_libdir}/%{name}/tr.msg -#%doc swat/README - -%files client -%defattr(-,root,root) -%(for i in %{_bindir}/{%{clientbin}}%{alternative_major};do echo $i;done) -%(for i in %{_mandir}/man?/{%{clientbin}}%{alternative_major}.?.*;do echo $i|grep -v smbprint;done) -#xclude %{_mandir}/man?/smbget* -%{_mandir}/man5/smbgetrc%{alternative_major}.5* -%ifnarch alpha -%(for i in /sbin/{%{client_sbin}}%{alternative_major};do echo $i;done) -%attr(4755,root,root) /bin/mount.cifs%{alternative_major} -%attr(755,root,root) %{_bindir}/smbmount%{alternative_major} -%attr(4755,root,root) %{_bindir}/smbumount%{alternative_major} -%attr(4755,root,root) %{_bindir}/smbmnt%{alternative_major} -%{_mandir}/man8/smbmnt*.8* -%{_mandir}/man8/smbmount*.8* -%{_mandir}/man8/smbumount*.8* -%{_mandir}/man8/mount.cifs*.8* -%else -%exclude %{_bindir}/smb*m*nt%{samba_major} -%exclude %{_mandir}/man8/smb*m*nt*.8* -%endif -# Link of smbspool to CUPS -/%{_libdir}/cups/backend/smb%{alternative_major} - -%files common -%defattr(-,root,root) -%dir /var/cache/%{name} -%dir /var/log/%{name} -%dir /var/run/%{name} -%(for i in %{_bindir}/{%{commonbin},tdbtool}%{samba_major};do echo $i;done) -%(for i in %{_mandir}/man?/{%{commonbin}}%{samba_major}\.[0-9]*;do echo $i;done) -#%{_libdir}/smbwrapper%{samba_major}.so -%dir %{_libdir}/%{name} -%{_libdir}/%{name}/*.dat -%{_libdir}/%{name}/charset -#%{_libdir}/%{name}/lowcase.dat -#%{_libdir}/%{name}/valid.dat -%dir %{_sysconfdir}/%{name} -%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smb.conf -%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smb-winbind.conf -%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/lmhosts -%dir %{_localstatedir}/%{name} -%attr(-,root,root) %{_localstatedir}/%{name}/codepages -%{_mandir}/man5/smb.conf*.5* -%{_mandir}/man5/lmhosts*.5* -#%{_mandir}/man7/Samba*.7* -%dir %{_datadir}/swat%{samba_major} -%attr(0750,root,adm) %{_datadir}/%{name}/scripts/smb-migrate -%attr(-,root,root) %{_datadir}/%{name}/smb.conf.clean -%attr(-,root,root) %{_datadir}/%{name}/README.mdk.conf - -%if %build_winbind -%files winbind -%defattr(-,root,root) -%{_sbindir}/winbindd -%{_sbindir}/winbind -%{_bindir}/wbinfo -%attr(755,root,root) /%{_lib}/security/pam_winbind* -%attr(755,root,root) /%{_lib}/libnss_winbind* -%attr(-,root,root) %config(noreplace) %{_initrddir}/winbind -%attr(-,root,root) %config(noreplace) %{_sysconfdir}/pam.d/system-auth-winbind* -%{_mandir}/man8/winbindd*.8* -%{_mandir}/man1/wbinfo*.1* -%endif - -%if %build_wins -%files -n nss_wins%{samba_major} -%defattr(-,root,root) -%attr(755,root,root) /%{_lib}/libnss_wins.so* -%endif - -%if %{?_with_test:1}%{!?_with_test:0} -%files test -%defattr(-,root,root) -%(for i in %{_bindir}/{%{testbin}}%{samba_major};do echo $i;done) -%{_mandir}/man1/vfstest%{samba_major}*.1* -%exclude %{_mandir}/man1/log2pcap*.1* -%else -%exclude %{_mandir}/man1/vfstest%{samba_major}*.1* -%exclude %{_mandir}/man1/log2pcap*.1* -%endif - -%if %build_system -%files -n %{libname} -%defattr(-,root,root) -%{_libdir}/libsmbclient.so.* -%else -%exclude %{_libdir}/libsmbclient.so.* -%endif - -%if %build_system -%files -n %{libname}-devel -%defattr(-,root,root) -%{_includedir}/* -%{_libdir}/libsmbclient.so -%doc clean-docs/libsmbclient/* -%else -%exclude %{_includedir}/* -%exclude %{_libdir}/libsmbclient.so -%endif - -%if %build_system -%files -n %{libname}-static-devel -%defattr(-,root,root) -%{_libdir}/libsmbclient.a -%else -%exclude %{_libdir}/libsmbclient.a -%endif - -#%files passdb-ldap -#%defattr(-,root,root) -#%{_libdir}/%{name}/*/*ldap.so - -%ifnarch alpha -%files passdb-mysql -%defattr(-,root,root) -%{_libdir}/%{name}/pdb/*mysql.so -%endif - -#ifnarch alpha -%files passdb-pgsql -%defattr(-,root,root) -%{_libdir}/%{name}/pdb/*pgsql.so -#endif - -%files passdb-xml -%defattr(-,root,root) -%{_libdir}/%{name}/pdb/*xml.so - -#Files for antivirus support: -%if %build_clamav -%files vscan-clamav -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-clamav.so -%config(noreplace) %{_sysconfdir}/%{name}/vscan-clamav.conf -%doc %{vfsdir}/%{vscandir}/INSTALL -%endif -%if !%build_clamav && %build_vscan -%exclude %{_libdir}/%{name}/vfs/vscan-clamav.so -%exclude %{_sysconfdir}/%{name}/vscan-clamav.conf -%endif - -%if %build_fprot -%files vscan-fprot -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-fprotd.so -%config(noreplace) %{_sysconfdir}/%{name}/vscan-fprotd.conf -%doc %{vfsdir}/%{vscandir}/INSTALL -%endif -%if !%build_fprot && %build_vscan -%exclude %{_libdir}/%{name}/vfs/vscan-fprotd.so -%exclude %{_sysconfdir}/%{name}/vscan-fprotd.conf -%endif - -%if %build_fsav -%files vscan-fsecure -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-fsav.so -%config(noreplace) %{_sysconfdir}/%{name}/vscan-fsav.conf -%doc %{vfsdir}/%{vscandir}/INSTALL -%endif -%if !%build_fsav && %build_vscan -%exclude %{_libdir}/%{name}/vfs/vscan-fsav.so -%exclude %{_sysconfdir}/%{name}/vscan-fsav.conf -%endif - -%if %build_icap -%files vscan-icap -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-icap.so -%config(noreplace) %{_sysconfdir}/%{name}/vscan-icap.conf -%doc %{vfsdir}/%{vscandir}/INSTALL -%endif -%if !%build_icap && %build_vscan -%exclude %{_libdir}/%{name}/vfs/vscan-icap.so -%exclude %{_sysconfdir}/%{name}/vscan-icap.conf -%endif - - -%if %build_kaspersky -%files vscan-kaspersky -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-kavp.so -%config(noreplace) %{_sysconfdir}/%{name}/vscan-kavp.conf -%doc %{vfsdir}/%{vscandir}/INSTALL -%endif -%if !%build_kaspersky && %build_vscan -%exclude %{_libdir}/%{name}/vfs/vscan-kavp.so -%exclude %{_sysconfdir}/%{name}/vscan-kavp.conf -%endif - -%if %build_mks -%files vscan-mks -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-mksd.so -%config(noreplace) %{_sysconfdir}/%{name}/vscan-mks*.conf -%doc %{vfsdir}/%{vscandir}/INSTALL -%endif -%if !%build_mks && %build_vscan -%exclude %{_libdir}/%{name}/vfs/vscan-mksd.so -%exclude %{_sysconfdir}/%{name}/vscan-mks*.conf -%endif - -%if %build_nai -%files vscan-nai -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-mcdaemon.so -%config(noreplace) %{_sysconfdir}/%{name}/vscan-mcdaemon.conf -%doc %{vfsdir}/%{vscandir}/INSTALL -%endif -%if !%build_nai && %build_vscan -%exclude %{_libdir}/%{name}/vfs/vscan-mcdaemon.so -%exclude %{_sysconfdir}/%{name}/vscan-mcdaemon.conf -%endif - -%if %build_openav -%files vscan-openav -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-oav.so -%config(noreplace) %{_sysconfdir}/%{name}/vscan-oav.conf -%doc %{vfsdir}/%{vscandir}/INSTALL -%endif -%if !%build_openav && %build_vscan -%exclude %{_libdir}/%{name}/vfs/vscan-oav.so -%exclude %{_sysconfdir}/%{name}/vscan-oav.conf -%endif - -%if %build_sophos -%files vscan-sophos -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-sophos.so -%config(noreplace) %{_sysconfdir}/%{name}/vscan-sophos.conf -%doc %{vfsdir}/%{vscandir}/INSTALL -%endif -%if !%build_sophos && %build_vscan -%exclude %{_libdir}/%{name}/vfs/vscan-sophos.so -%exclude %{_sysconfdir}/%{name}/vscan-sophos.conf -%endif - -%if %build_symantec -%files vscan-symantec -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-symantec.so -%config(noreplace) %{_sysconfdir}/%{name}/vscan-symantec.conf -%doc %{vfsdir}/%{vscandir}/INSTALL -%endif -%if !%build_symantec && %build_vscan -%exclude %{_sysconfdir}/%{name}/vscan-symantec.conf -%endif - -%if %build_trend -%files vscan-trend -%defattr(-,root,root) -%{_libdir}/%{name}/vfs/vscan-trend.so -%config(noreplace) %{_sysconfdir}/%{name}/vscan-trend.conf -%doc %{vfsdir}/%{vscandir}/INSTALL -%endif -%if !%build_trend && %build_vscan -%exclude %{_libdir}/%{name}/vfs/vscan-trend.so -%exclude %{_sysconfdir}/%{name}/vscan-trend.conf -%endif - -%exclude %{_mandir}/man1/smbsh*.1* - -%changelog -* Tue Nov 09 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.8-1mdk -- 3.0.8 -- add tdbtool to common -- fix doc permissions (broken in tarball) - -* Fri Nov 05 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.8-0.pre2.1mdk -- 3.0.8pre2 - -* Wed Oct 06 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.7-3mdk -- drop patch 23 to ldap schema (patch in 3.0.6 was to bring schema up-to-date - with pre-3.0.7 cvs) (#11960) -- merge winbind init script fix into packaging patch -- Don't set printcap name in pdf printer share (#11861) -- allow official builds off-cluster (with _with_official macro defined) - -* Tue Sep 14 2004 Stew Benedict <sbenedict@mandrakesoft.com> 3.0.7-2mdk -- fix typo in winbind init script that prevented stop - (in 3.0.6 too, patch27) - -* Mon Sep 13 2004 Stew Benedict <sbenedict@mandrakesoft.com> 3.0.7-1mdk -- 3.0.7 (drop patch10,21,22,24,25,26; rediff patch23) - -* Thu Sep 09 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.6-5mdk -- patch for samba bug 1464 -- make release-depenent release tag more like security updates tags -- sync smb.conf with drakwizard (which also fixes quoting of macros which - can have spaces) -- add example admin share -- patches from Gerald Carter - -* Mon Aug 31 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.6-4mdk -- Add Jerry's post-3.0.6 patches -- fix bug 11088 - -* Fri Aug 27 2004 Buchan Milne <bgmilne@linux-mandrake.com>3.0.6-3mdk -- patch from Urban Widmark via Robert Sim (anthill bug 1086) to be able - to diable unix extensions in smbmount (and via 'unix extensions' in smb.conf) -- magic-devel only available on 9.2 and up -- allow building for stable release on the chroots on the cluster -- fix patch8 -- fix build on older releases - -* Fri Aug 20 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.6-2mdk -- 3.0.6 --drop P6 (merged), P7 (broken for now) --keep libsmbclient where it belongs (on x86 for now) --implement mandrake version-specific release number - -* Thu Aug 12 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.5-2mdk -- 3.0.5 -- fix pid file location (#10666) -- merge amd64 fixes (P7) -- make pdf printer work again, and other misc fixes to default config - -* Sun Jun 20 2004 Oden Eriksson <oeriksson@mandrakesoft.com> 3.0.5-0.pre1.3mdk -- fix rpm group in libsmbclient0-devel (Goetz Waschk) - -* Sat Jun 19 2004 Oden Eriksson <oeriksson@mandrakesoft.com> 3.0.5-0.pre1.2mdk -- fix deps - -* Wed May 26 2004 Buchan Milne <bgmilne@linux-mandrake.com>3.0.5-0.pre1.1mdk -- fix building without scanners -- 3.0.5pre1 (and drop patch from CVS) - -* Fri May 21 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.4-3mdk -- re-work scanner support - -* Thu May 13 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.4-2mdk -- 3.0.4 -- Patch for winbind (from samba bug 1315) - -* Thu Apr 29 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.2a-4mdk -- Fix samba-vscan (0.3.5), add clamav and icap, and build scanners by default -- Fix default vscan-clamav config and add sample config for homes share -- Add pgsql passdb backend - -* Mon Mar 01 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.2a-3mdk -- Fix default smbldap config -- Don't clobber smb.conf backup for no reason - -* Mon Feb 16 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.2a-2mdk -- 3.0.2a -- Only update smb.conf in upgrade from <3.0.1-3mdk (via trigger) and update - upgrade script (stew) - -* Mon Feb 09 2004 Buchan Milne <bgmilne@linux0mandrake.com> 3.0.2-2mdk -- 3.0.2 - -* Mon Feb 02 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.2-0.rc2.1mdk -- 3.0.2rc2 - -* Tue Jan 6 2004 Stew Benedict <sbenedict@mandrakesoft.com> 3.0.1-5mdk -- update migrate script, feedback from Luca Berra - -* Mon Jan 5 2004 Stew Benedict <sbenedict@mandrakesoft.com> 3.0.1-4mdk -- re-enable relaxed CFLAGS to fix broken smbmount, smbclient - -* Fri Jan 2 2004 Stew Benedict <sbenedict@mandrakesoft.com> 3.0.1-3mdk -- add migrate script to merge existing smb.conf - -* Fri Dec 19 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-2mdk -- 3.0.1 final - -* Thu Dec 11 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.rc2.2mdk -- 3.0.1rc2 - -* Sat Dec 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.rc1.2mdk -- rc1 -- samba-vscan-0.3.4 - -* Fri Dec 05 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.5mdk -- Allow winbind to start if old winbind ranges are used (ease upgrades) - -* Tue Nov 18 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.4mdk -- Fix build as system on 8.2 (and probably earlier) - -* Sun Nov 16 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.3mdk -- Ensure printer drivers keep permissions by default (setgid and inherit perms) - -* Fri Nov 14 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.2mdk -- 3.0.1pre3 -- Add support for Mandrake 10.0 (as system samba) -- Fix alternatives triggers -- Fix obsoletes - -* Mon Nov 10 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre2.2mdk -- 3.0.1pre2 -- misc spec files (pointed out by Luca Olivetti) -- Fix path to smbldap-passwd.pl -- Only allow one copy of winbind and nss_wins -- Add trigger for alternatives - -* Sun Oct 12 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre1.2mdk -- 3.0.1pre1 -- remove buildroot patch (p3), fixed upstream - -* Thu Sep 25 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-2mdk -- 3.0.0 final - -* Sat Sep 13 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc4.2mdk -- rc4 -- Don't update alternatives in pre/post scripts when not using alternatives -- Fix case of --with-system without alternatives -- Final fixes to smbldap-tools for non-system case -- Remove duplicate docs (really - 1 character typo ...) -- Update configs (fix winbind init script, add example scripts in smb.conf) - -* Tue Sep 09 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc3.2mdk -- rc3 -- Fix mount.smb{,fs} alternatives (spotted by Laurent Culioli) - -* Thu Sep 04 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc2.3mdk -- Fix alternatives -- Fix libname (can I blame guillomovitch's evil line-wrapping spec mode?) -- Fix smbldap-tools package/use names when not system samba -- Don't conflict samba3-client with samba-client for now so we can install it - -* Fri Aug 29 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc2.2mdk -- rc2 -- Remove patches 100-102 (upstream) -- Fix libname -- Alternatavise client -- Better solution to avoid rpath - -* Fri Aug 22 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc1.3mdk -- Fix build with test package (p100), but not by default (too big) -- Fix (p101) for SID resolution when member of samba-2.2.x domain -- Fix libsmbclient packages (thanks Gotz) -- version mount.cifs, patch from CVS (p102), and setuid it -- Clean up docs (guillomovitch spam ;-) - -* Sat Aug 16 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc1.2mdk -- rc1 -- disable test subpackage since it's broken again - -* Mon Jul 28 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta3.3mdk -- Rebuild for kerberos-1.3 on cooker -- Put printer directories back -- Add mount.cifs -- Go back to standard optimisations - -* Thu Jul 17 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta3.2mdk -- beta3 -- remove -g from cflags to avoid large static libraries -- drop optimisation from O2 to O1 for gcc 3.3.1 -- own some directories for distriblint's benefit -- use chrpath on distro's that have it to drastically reduce rpmlint score - -* Mon Jul 14 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta2.3mdk -- place non-conditional excludes at the end of files list, to prevent causing - rpm in Mandrake <=8.2 from segfaulting when processing files. -- Update default config - -* Wed Jul 02 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta2.2mdk -- 3.0.0beta2 -- manually build editreg -- Add some new man pages - -* Tue Jun 10 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta1.3mdk -- add provision for passdb-ldap subpackage (it doesn't build like that yet) -- avoid debugging info on cooker/9.2 for the moment -- We probably don't need to autoconf (and can thus build on 8.1) -- We can probably build without kerberos support (and thus on 8.0) -- Don't require mysql-devel on alpha's (maybe we want to be able to disable - mysql support for other arches?) -- We shouldn't need to specifically add openssl to include path, since ssl - support is deprecated. -- png icons, change menu title to not conflict with ksambaplugin -- update to samba-vscan-0.3.3beta1, but it still does not build the vscan - modules. -- add -static-devel package -- Add buildrequires for lib packages that are picked up if installed - (ncurses, popt) in an attempt to get slbd to build samba3 -- Fix default config (P100) - -* Sun Jun 08 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta1.2mdk -- Get packages into cooker (klama doesn't want to build this package ..) -- samba-vscan-0.3.2b - -* Fri Jun 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha24.2mdk -- Rename debug package to test and other fixes for rpm-4.2 -- prepare for beta1 - -* Wed Apr 30 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha24.1mdk -- Remove some files removed upstream -- In builds from source, don't terminate on missing docs or unpackaged files - (if only we could do it for other missing files ...) - -* Mon Apr 28 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha24.0mdk -- Reenable debug package by (--without debug to not build it), fixed post-a23 -- Add bugzilla note for builds from source (also intended for packages made - available on samba FTP site) at samba team request -- Fix build from CVS (run autogen.sh, pass options to all rpm commands) -- Appease distriblint, but not much to be done about /usr/share/swat3/ since - samba-doc owns some subdirs, and samba-swat others, and they can be installed - independantly. -- Apply kaspersky vscan build fix from samba2 -- Final for alpha24 - -* Wed Apr 23 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha23.3mdk -- Small fixes in preparation for testing as system samba -- Make debug package optional (--with debug) since it's often broken -- Add support for 9.2 (including in-line smbd quota patch for glibc2.3) -- Add --with options option, which will just show you the available options and exit - -* Sun Apr 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha23.2mdk -- Alpha23 -- buildrequire autconf2.5 -- samba-vscan 0.3.2a -- Remove patch 102 (upstreamed) - -* Thu Mar 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha22.2mdk -- Alpha22 -- Add profiles binary to server and ntlm_auth to common -- smbwrapper and torture target broken (only in 9.0?) -- remove unused source 2 - -* Tue Mar 04 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha21.4mdk -- Don't provide samba-{server,client,common} when not system samba (bug #2617) -- Don't build libsmbclient packages when not system samba -- Fix conflict between samba-server and samba3-server (pam_smbpass) -- Fix smbwrapper (from 2.2.7a-5mdk for bug #2356) -- Fix codepage/charset example (bug #1574) - -* Thu Jan 23 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha21.3mdk -- samba-vscan 0.3.1 (and make it build again), including required inline edits -- Make all vscan packages provide samba(3)-vscan -- Build all vscan except kav (requires kaspersky lib) with --with-scanners -- Add vscan-(scanner).conf files -- Explicitly add ldapsam for 2.2 compatability when building --with ldap, - default build now uses new ldap passdb backend (ie you always get ldap) -- Enable (experimental) tdb passdb backend -- Fix file ownership conflicts between server and common -- Cleanup configure, to match order of --help -- Fix libdir location, was being overridden by --with-fhs -- Split off a libsmbclient and -devel package -- Add wins replication init script (patch 102) -- Workaround passdb/pdb_xml.c not compiling -- Workaround missing install targets for smbsh/smbwrapper.so in cvs -- Inline patch smbd/quotas.c for Mandrake >9.0 - -* Wed Nov 27 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha21.2mdk -- Remove patch 20,21,22,23,25,26 (upstream) -- New destdir patch from cvs (18) -- package installed but non-packaged files -- new debug subpackage for vfstest and related files (it was that or nuke the - manpage ;-)) -- use _libdir for libdir instead of _sysconfdir -- Update samba-vscan (untested) - -* Mon Oct 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.3mdk -- Fix mount.smbfs3 pointing to smbmount not in package -- Remove unnecessary lines from install (now done by make) -- Build with ldap and ads on all releases by default -- Put av-stuff back - -* Mon Oct 21 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.2mdk -- When not building as system samba, avoid conflicting with system samba -- Macro-ize as much as possible for above (aka finish cleanups) -- Fix paths in init scripts and logrotate and xinetd -- Fix provides and obsoletes so as to provide samba, but not obsolete - current stable until we have a stable release (when it's the system samba). -- Add warnings to descriptions when not system samba. -- This is now parallel installable with the normal samba release, for easy - testing. It shouldn't touch existing installations. Of course, only - one samba at a time on the same interface! - -* Sat Sep 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.1mdk -- Merge with 2.2.6pre2.2mdk -- Detect alpha- and beta-, along with pre-releases - -* Tue Feb 05 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.1mdk -- Sync with 2.2.3-2mdk (new --without options, detect when - building for a different distribution. - -* Mon Feb 04 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.0mdk -- Sync with 2.2.2-10mdk, which added build-time options --with ldap, - winbind, acl, wins, mdk72, mdk80, mdk81, mdk82, cooker. Added - warning in description if built with these options. - -* Wed Jan 23 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.2mdk -- Added if's for build_ads, which hopefully will add Active Directory - Support (by request). - -* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.1mdk -- More syncing with 2.2 rpm (post and postun scripts) -- Testing without ldap - -* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.0mdk -- 3.0-alpha13 -- Fixed installman.sh patch. - -* Wed Jan 09 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.1mdk -- Fixed %post and %preun for nss_wins, added %post and %preun for - samba-winbind (chkconfig and winbind entries in nsswitch.conf) - -* Sun Dec 23 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.0mdk -- 3.0-alpha12 -- Sync up with changes made in 2.2.2 to support Mandrake 8.0, 7.2 -- Added new subpackage for swat -- More if's for ldap. - -* Thu Dec 20 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha11-0.0mdk -- 3.0-alpha11 - -* Wed Dec 19 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha10-0.0mdk -- 3.0-alpha10 - -* Tue Dec 18 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha9-0.0mdk -- 3.0-alpha9 - -* Mon Dec 17 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.1mdk -- Added net command to %files common, pdbedit and smbgroupedit to - %files, s/%{prefix}\/bin/%{_bindir}/ (the big cleanup). - Added patch to smb.init from 2.2.2 (got missed with 3.0-alpha1 patches) - -* Sun Dec 16 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.0mdk -- Patch for installman.sh to handle lang=en correctly (p24) -- added --with-manpages-langs=en,ja,pl (translated manpages), but there - aren't any manpages for these languages yet ... so we still - need %dir and %doc entries for them ... -- patch (p25) to configure.in to support more than 2 languages. -- addtosmbpass seems to have returned for now, but make_* have disappeared! - -* Fri Dec 14 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha6-0.0mdk -- DESTDIR patch for Makefile.in (p23), remove a lot of %%install scripts - this forces move of smbcontrol and smbmnt to %{prefix}/bin - removed --with-pam_smbpass as it doesn't compile. - -* Thu Dec 06 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-0.0alpha1mdk -- Samba 3.0alpha1 released (we missed Samba 3.0alpha0!) -- Redid smbmount-sbin patch and smb.conf patch (20), removed xfs quota patch - (applied upstream), removed ook-patch (codepage directory totally different). -- Added winbind.init (21) and system-auth-winbind.pamd (22). Patches 20-23 - should be applied upstream before 3.0 ships ... - -* Wed Dec 05 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-6mdk -- fixed typo in system-auth-winbind.pamd (--Thanks J. Gluck). -- fixed %post xxx problem (smb not started in chkconfig --Thanks Viet & B. Kenworthy). - -* Fri Nov 23 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-5mdk -- Had to remove the network recycle bin patch: it seems to mess up - file deletion from windows (files appear to be "already in use") - -* Tue Nov 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-4mdk -- added network recycle bin patch: - <http://www.amherst.edu/~bbstone/howto/samba.html> -- added "recycle bin = .recycled" parameter in smb.conf [homes]. -- fixed winbind/nss_wins perms (oh no I don't own that stuff ;o) - -* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-3mdk -- added %build 8.0 and 7.2, for tweakers to play around. -- changed configure options: - . removed --with-mmap, --with-netatalk (obsolete). - . added --with-msdfs, --with-vfs (seems stable, but still need testing). - -* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-2mdk -- rebuilt with winbind and nss_wins enabled. - -* Wed Oct 31 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-1mdk -- Rebuilt on cooker. - -* Wed Oct 31 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.992mdk -- Patch for smb.conf to fix incorrect lpq command, typo in winbind, - and add sample linpopup command. Added print driver directories. -- New XFS quota patch (untested!, samba runs, but do quotas work? We - can't check yet since the kernel doesn't seem to support XFS quotas!) - -* Fri Oct 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-0.99mdk -- New samba.spec, almost ready for winbind operations. OLA for Buchan Milne - Who did a tremendous integration work on 2.2.2. - Rebuild on cooker, please test XFS (ACLs and quotas) again... - -* Mon Oct 15 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.9mdk -- Samba-2.2.2. released! Use %defines to determine which subpackages - are built and which Mandrake release we are buiding on/for (hint: define - build_mdk81 1 for Mandrake 8.1 updates) - -* Sun Oct 14 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011014mdk -- %post and %postun for nss_wins - -* Wed Oct 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011010mdk -- New CVS snapshot, /etc/pam.d/system-auth-winbind added - with configuration to allow easy winbind setup. - -* Sun Oct 7 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011007mdk -- Added new package nss_wins and moved smbpasswd to common (required by - winbind). - -* Sat Oct 6 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011006mdk -- Added new package winbind. - -* Mon Oct 1 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011001mdk -- Removed patch to smb init.d file (applied in cvs) - -* Sun Sep 30 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010930mdk -- Added winbind init script, which still needs to check for running nmbd. - -* Thu Sep 27 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010927mdk -- Built from samba-2.2.2-pre cvs, added winbindd, wbinfo, nss_winbind and - pam_winbind, moved pam_smbpass from samba-common to samba. We still - need a start-up script for winbind, or need to modify existing one. - -* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-15mdk -- Enabled acl support (XFS acls now supported by kernel-2.4.8-21mdk thx Chmou) - Added smbd patch to support XFS quota (Nathan Scott) - -* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-14mdk -- Oops! smbpasswd created in wrong directory... - -* Tue Sep 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-13mdk -- Removed a wrong comment in smb.conf. - Added creation of smbpasswd during install. - -* Mon Aug 27 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-12mdk -- really less verbose %%post - -* Sat Aug 25 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1a-11mdk -- Fix shared libs in /usr/bin silliness. - -* Thu Aug 23 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-10mdk -- less verbose %%post - -* Wed Aug 22 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-9mdk -- Added smbcacls (missing in %files), modification to smb.conf: ([printers] - is still needed, even with point-and-print!, user add script should - use name and not gid, since we may not get the gid . New script for - putting manpages in place (still need to be added in %files!). Moved - smbcontrol to sbin and added it and its man page to %files. - -* Wed Aug 22 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-8mdk -- cleanup /var/lib/samba/codepage/src - -* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-7mdk -- moved codepage generation to %%install and codepage dir to /var/lib/samba - -* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-6mdk -- /lib/* was in both samba and samba-common - Introducing samba-doc: "alas, for the sake of thy modem, shalt thou remember - when Samba was under the Megabyte..." - -* Fri Aug 03 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-5mdk -- Added "the gc touch" to smbinit through the use of killall -0 instead of - grep cupsd | grep -v grep (too many greps :o) - -* Wed Jul 18 2001 Stefan van der Eijk <stefan@eijk.nu> 2.2.1a-4mdk -- BuildRequires: libcups-devel -- Removed BuildRequires: openssl-devel - -* Fri Jul 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-3mdk -- replace chkconfig --add/del with --level 35 on/reset. - -* Fri Jul 13 2001 Geoffrey Lee <snailtalk@mandrakesoft.cm> 2.2.1a-2mdk -- Replace discription s/inetd/xinetd/, we all love xinetd, blah. - -* Thu Jul 12 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-1mdk -- Bugfix release. Fixed add user script, added print$ share and printer admin - We need to test interaction of new print support with CUPS, but printer - driver uploads should work. - -* Wed Jul 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-17mdk -- fixed smb.conf a bit, rebuilt on cooker. - -* Tue Jul 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-16mdk -- Finally, samba 2.2.1 has actually been release. At least we were ready! - Cleaned up smb.conf, and added some useful entries for domain controlling. - Migrated changes made in samba's samba2.spec for 2.2.1 to this file. - Added groupadd command in post to create a group for samba machine accounts. - (We should still check the postun, samba removes pam, logs and cache) - -* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-15mdk -- fixed smbwrapper compile options. - -* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-14mdk -- added LFS support. - added smbwrapper support (smbsh) - -* Wed Jun 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-13mdk -- /sbin/mount.smb and /sbin/mount.smbfs now point to the correct location - of smbmount (/usr/bin/smbmount) - -* Tue Jun 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-12mdk -- smbmount and smbumount are now in /usr/bin and SUID. - added ||: to triggerpostun son you don't get error 1 anymore when rpm -e - Checked the .bz2 sources with file *: everything is OK now (I'm so stupid ;o)! - -* Tue Jun 19 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1-11mdk -- s/Copyright/License/; -- Stop Sylvester from pretending .gz source to be .bz2 source via filename - aka really bzip2 the source. - -* Mon Jun 18 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-10mdk -- changed Till's startup script modifications: now samba is being reloaded - automatically 1 minute after it has started (same reasons as below in 9mdk) - added _post_ and _preun_ for service smb - fixed creation of /var/lib/samba/{netlogon,profiles} (%dir was missing) - -* Thu Jun 14 2001 Till Kamppeter <till@mandrakesoft.com> 2.2.1-9mdk -- Modified the Samba startup script so that in case of CUPS being used as - printing system Samba only starts when the CUPS daemon is ready to accept - requests. Otherwise the CUPS queues would not appear as Samba shares. - -* Mon Jun 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-8mdk -- patched smbmount.c to have it call smbmnt in sbin (thanks Seb). - -* Wed May 30 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-7mdk -- put SWAT menu icons back in place. - -* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-6mdk -- OOPS! fixed smbmount symlinks - -* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-5mdk -- removed inetd postun script, replaced with xinetd. - updated binary list (smbcacls...) - cleaned samba.spec - -* Mon May 28 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-4mdk -- Changed configure options to point to correct log and codepage directories, - added crude script to fix logrotate file for new log file names, updated - patches to work with current CVS. - -* Thu May 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-3mdk -- Cleaned and updated the %files section. - -* Sat May 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-2mdk -- Moved all samba files from /etc to /etc/samba (Thanks DomS!). - Fixed fixinit patch (/etc/samba/smb.conf) - -* Fri May 18 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-1mdk -- Now use packaging/Mandrake/smb.conf, removed unused and obsolete - patches, moved netlogon and profile shares to /var/lib/samba in the - smb.conf to match the spec file. Added configuration for ntlogon to - smb.conf. Removed pam-foo, fixinit and makefilepath patches. Removed - symlink I introduced in 2.2.0-1mdk - -* Thu May 3 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-5mdk -- Added more configure options. Changed Description field (thx John T). - -* Wed Apr 25 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-4mdk -- moved netlogon and profiles to /var/lib/samba by popular demand ;o) - -* Tue Apr 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-3mdk -- moved netlogon and profiles back to /home. - -* Fri Apr 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-2mdk -- fixed post inetd/xinetd script& - -* Thu Apr 19 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.0-1mdk -- Upgrade to 2.2.0. Merged most of 2.0.7-25mdk's patches (beware - nasty "ln -sf samba-%{ver} ../samba-2.0.7" hack to force some patches - to take. smbadduser and addtosmbpass seem to have disappeared. Moved - all Mandrake-specific files to packaging/Mandrake and made patches - from those shipped with samba. Moved netlogon to /home/samba and added - /home/samba/profiles. Added winbind,smbfilter and debug2html to make command. - -* Thu Apr 12 2001 Frederic Crozat <fcrozat@mandrakesoft.com> 2.0.7-25mdk -- Fix menu entry and provide separate menu entry for GNOME - (nautilus doesn't support HTTP authentication yet) -- Add icons in package - -* Fri Mar 30 2001 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-24mdk -- use new server macros - -* Wed Mar 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-23mdk -- check whether /etc/inetd.conf exists (upgrade) or not (fresh install). - -* Thu Mar 15 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-22mdk -- spec cosmetics, added '-r' option to lpr-cups command line so files are - removed from /var/spool/samba after printing. - -* Tue Mar 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-21mdk -- merged last rh patches. - -* Thu Nov 23 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-20mdk -- removed dependencies on cups and cups-devel so one can install samba without using cups -- added /home/netlogon - -* Mon Nov 20 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-19mdk -- Changed default print command in /etc/smb.conf, so that the Windows - driver of the printer has to be used on the client. -- Fixed bug in smbspool which prevented from printing from a - Linux-Samba-CUPS client to a Windows server through the guest account. - -* Mon Oct 16 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-18mdk -- Moved "smbspool" (Samba client of CUPS) to the samba-client package - -* Sat Oct 7 2000 Stefan van der Eijk <s.vandereijk@chello.nl> 2.0.7-17mdk -- Added RedHat's "quota" patch to samba-glibc21.patch.bz2, this fixes - quota related compile problems on the alpha. - -* Wed Oct 4 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-16mdk -- Fixed 'guest ok = ok' flag in smb.conf - -* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-15mdk -- Allowed guest account to print in smb.conf -- added swat icon in menu - -* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-14mdk -- Removed rh ssl patch and --with-ssl flag: not appropriate for 7.2 - -* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-13mdk -- Changed fixinit patch. -- Changed smb.conf for better CUPS configuration. -- Thanks Fred for doing this ---vvv. - -* Tue Oct 3 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-12mdk -- menu entry for web configuration tool. -- merge with rh: xinetd + ssl + pam_stack. -- Added smbadduser rh-bugfix w/o relocation of config-files. - -* Mon Oct 2 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-11mdk -- added build requires on cups-devel and pam-devel. - -* Mon Oct 2 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-10mdk -- Fixed smb.conf entry for CUPS: "printcap name = lpstat", "lpstats" was - wrong. - -* Mon Sep 25 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-9mdk -- Cosmetic changes to make rpmlint more happy - -* Wed Sep 11 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-8mdk -- added linkage to the using_samba book in swat - -* Fri Sep 01 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-7mdk -- Added CUPS support to smb.conf -- Added internationalization options to smb.conf [Global] - -* Wed Aug 30 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-6mdk -- Put "smbspool" to the files to install - -* Wed Aug 30 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-5mdk -- Did some cleaning in the patches - -* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-4mdk -- relocated man pages from /usr/man to /usr/share/man for compatibility reasons - -* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-3mdk -- added make_unicodemap and build of unicode_map.$i in the spec file - -* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-2mdk -- renamed /etc/codepage/codepage.$i into /etc/codepage/unicode_map.$i to fix smbmount bug. - -* Fri Jul 07 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-1mdk -- 2.0.7 - -* Wed Apr 05 2000 Francis Galiegue <fg@mandrakesoft.com> 2.0.6-4mdk - -- Titi sucks, does not put versions in changelog -- Fixed groups for -common and -client -- /usr/sbin/samba is no config file - -* Thu Mar 23 2000 Thierry Vignaud <tvignaud@mandrakesoft.com> -- fix buggy post install script (pixel) - -* Fri Mar 17 2000 Francis Galiegue <francis@mandrakesoft.com> 2.0.6-2mdk - -- Changed group according to 7.1 specs -- Some spec file changes -- Let spec-helper do its job - -* Thu Nov 25 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> -- 2.0.6. - -* Tue Nov 2 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> -- Merge with rh changes. -- Split in 3 packages. - -* Fri Aug 13 1999 Pablo Saratxaga <pablo@@mandrakesoft.com> -- corrected a bug with %post (the $1 parameter is "1" in case of - a first install, not "0". That parameter is the number of packages - of the same name that will exist after running all the steps if nothing - is removed; so it is "1" after first isntall, "2" for a second install - or an upgrade, and "0" for a removal) - -* Wed Jul 28 1999 Pablo Saratxaga <pablo@@mandrakesoft.com> -- made smbmnt and smbumount suid root, and only executable by group 'smb' - add to 'smb' group any user that should be allowed to mount/unmount - SMB shared directories - -* Fri Jul 23 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> -- 2.0.5a (bug security fix). - -* Wed Jul 21 1999 Axalon Bloodstone <axalon@linux-mandrake.com> -- 2.0.5 -- cs/da/de/fi/fr/it/tr descriptions/summaries - -* Sun Jun 13 1999 Bernhard Rosenkränzer <bero@mandrakesoft.com> -- 2.0.4b -- recompile on a system that works ;) - -* Wed Apr 21 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com> -- Mandrake adaptations. -- Bzip2 man-pages. - -* Fri Mar 26 1999 Bill Nottingham <notting@redhat.com> -- add a mount.smb to make smb mounting a little easier. -- smb filesystems apparently do not work on alpha. Oops. - -* Thu Mar 25 1999 Bill Nottingham <notting@redhat.com> -- always create codepages - -* Tue Mar 23 1999 Bill Nottingham <notting@redhat.com> -- logrotate changes - -* Sun Mar 21 1999 Cristian Gafton <gafton@redhat.com> -- auto rebuild in the new build environment (release 3) - -* Fri Mar 19 1999 Preston Brown <pbrown@redhat.com> -- updated init script to use graceful restart (not stop/start) - -* Tue Mar 9 1999 Bill Nottingham <notting@redhat.com> -- update to 2.0.3 - -* Thu Feb 18 1999 Bill Nottingham <notting@redhat.com> -- update to 2.0.2 - -* Mon Feb 15 1999 Bill Nottingham <notting@redhat.com> -- swat swat - -* Tue Feb 9 1999 Bill Nottingham <notting@redhat.com> -- fix bash2 breakage in post script - -* Fri Feb 5 1999 Bill Nottingham <notting@redhat.com> -- update to 2.0.0 - -* Mon Oct 12 1998 Cristian Gafton <gafton@redhat.com> -- make sure all binaries are stripped - -* Thu Sep 17 1998 Jeff Johnson <jbj@redhat.com> -- update to 1.9.18p10. -- fix %triggerpostun. - -* Tue Jul 07 1998 Erik Troan <ewt@redhat.com> -- updated postun triggerscript to check $0 -- clear /etc/codepages from %preun instead of %postun - -* Mon Jun 08 1998 Erik Troan <ewt@redhat.com> -- made the %postun script a tad less agressive; no reason to remove - the logs or lock file (after all, if the lock file is still there, - samba is still running) -- the %postun and %preun should only exectute if this is the final - removal -- migrated %triggerpostun from Red Hat's samba package to work around - packaging problems in some Red Hat samba releases - -* Sun Apr 26 1998 John H Terpstra <jht@samba.anu.edu.au> -- minor tidy up in preparation for release of 1.9.18p5 -- added findsmb utility from SGI package - -* Wed Mar 18 1998 John H Terpstra <jht@samba.anu.edu.au> -- Updated version and codepage info. -- Release to test name resolve order - -* Sat Jan 24 1998 John H Terpstra <jht@samba.anu.edu.au> -- Many optimisations (some suggested by Manoj Kasichainula <manojk@io.com> -- Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb -- Compounded make line -- Updated smb.init restart mechanism -- Use compound mkdir -p line instead of individual calls to mkdir -- Fixed smb.conf file path for log files -- Fixed smb.conf file path for incoming smb print spool directory -- Added a number of options to smb.conf file -- Added smbadduser command (missed from all previous RPMs) - Doooh! -- Added smbuser file and smb.conf file updates for username map |