diff options
Diffstat (limited to 'packaging/Mandrake')
| -rw-r--r-- | packaging/Mandrake/mount.cifs.8 | 181 | ||||
| -rw-r--r-- | packaging/Mandrake/samba2.spec.tmpl | 203 |
2 files changed, 302 insertions, 82 deletions
diff --git a/packaging/Mandrake/mount.cifs.8 b/packaging/Mandrake/mount.cifs.8 new file mode 100644 index 0000000000..7ab1be305c --- /dev/null +++ b/packaging/Mandrake/mount.cifs.8 @@ -0,0 +1,181 @@ +.\" This manpage has been automatically generated by docbook2man +.\" from a DocBook document. This tool can be found at: +.\" <http://shell.ipoline.com/~elmert/comp/docbook2X/> +.\" Please send any bug reports, improvements, comments, patches, +.\" etc. to Steve Cheng <steve@ggi-project.org>. +.TH "MOUNT.CIFS" "8" "03 August 2002" "" "" +.SH NAME +mount.cifs \- mount using the Common Internet File System (CIFS) +.SH SYNOPSIS + +\fBmount.cifs\fR \fBservice\fR \fBmount-point\fR [ \fB-o options\fR] + +.SH "DESCRIPTION" +.PP +\fBmount.cifs\fR mounts a Linux CIFS filesystem. It +is usually invoked as \fBmount.cifs\fR by +the \fBmount(8)\fR command when using the +"-t cifs" option. This command only works in Linux, and the kernel must +support the cifs filesystem. The CIFS protocol is the successor to the +SMB protocol and is supported by most Windows servers and many other +commercial servers and Network Attached Storage appliances as well as +by the popular Open Source server Samba. +.PP +Options to \fBmount.cifs\fR are specified as a comma-separated +list of key=value pairs. It is possible to send options other +than those listed here, assuming that cifs supports them. If +you get mount failures, check your kernel log for errors on +unknown options. +.PP +\fBmount.cifs\fR is a daemon. After mounting it keeps running until +the mounted cifs is umounted. It will log things that happen +when in daemon mode using the "machine name" mount.cifs, so +typically this output will end up in +\fIlog.mount.cifs\fR. +.SH "OPTIONS" +.TP +\fBusername=<arg>\fR +specifies the username to connect as. If +this is not given, then the environment variable \fB USER\fR is used. This option can also take the +form "user%password" or "user/workgroup" or +"user/workgroup%password" to allow the password and workgroup +to be specified as part of the username. +.TP +\fBpassword=<arg>\fR +specifies the CIFS password. If this +option is not given then the environment variable +\fBPASSWD\fR is used. If it can find +no password \fBmount.cifs\fR will prompt +for a passeword, unless the guest option is +given. + +Note that password which contain the arguement delimiter +character (i.e. a comma ',') will failed to be parsed correctly +on the command line. However, the same password defined +in the PASSWD environment variable or a credentials file (see +below) will be read correctly. +.TP +\fBcredentials=<filename>\fR +specifies a file that contains a username +and/or password. The format of the file is: + + +.nf + username = <value> + password = <value> + +.fi + +This is preferred over having passwords in plaintext in a +shared file, such as \fI/etc/fstab\fR. Be sure to protect any +credentials file properly. +.TP +\fBuid=<arg>\fR +sets the uid that will own all files on +the mounted filesystem. +It may be specified as either a username or a numeric uid. +.TP +\fBgid=<arg>\fR +sets the gid that will own all files on +the mounted filesystem. +It may be specified as either a groupname or a numeric +gid. +.TP +\fBport=<arg>\fR +sets the remote cifs port number. By default +port 445 is tried then if no response port 139 is tried. +.TP +\fBfmask=<arg>\fR +sets the file mask. This determines the +permissions that remote files have in the local filesystem. +The default is based on the current umask. +.TP +\fBdmask=<arg>\fR +sets the directory mask. This determines the +permissions that remote directories have in the local filesystem. +The default is based on the current umask. +.TP +\fBdebug=<arg>\fR +sets the debug level. This is useful for +tracking down cifs connection problems. A suggested value to +start with is 4. If set too high there will be a lot of +output, possibly hiding the useful output. +.TP +\fBip=<arg>\fR +sets the destination host or IP address. +.TP +\fBdomain=<arg>\fR +sets the domain (workgroup) of the user +.TP +\fBguest\fR +don't prompt for a password +.TP +\fBro\fR +mount read-only +.TP +\fBrw\fR +mount read-write +.TP +\fBiocharset=<arg>\fR +sets the charset used by the Linux side for codepage +to charset translations (NLS). Argument should be the +name of a charset, like iso8859-1. (Note: only kernel +2.4.0 or later) +.TP +\fBcodepage=<arg>\fR +sets the codepage the server uses. See the iocharset +option. Example value cp850. (Note: only kernel 2.4.0 +or later) +.TP +\fBttl=<arg>\fR +how long a directory listing is cached in milliseconds +(also affects visibility of file size and date +changes). A higher value means that changes on the +server take longer to be noticed but it can give +better performance on large directories, especially +over long distances. Default is 1000ms but something +like 10000ms (10 seconds) is probably more reasonable +in many cases. +(Note: only kernel 2.4.2 or later) +.SH "ENVIRONMENT VARIABLES" +.PP +The variable \fBUSER\fR may contain the username of the +person using the client. This information is used only if the +protocol level is high enough to support session-level +passwords. The variable can be used to set both username and +password by using the format username%password. +.PP +The variable \fBPASSWD\fR may contain the password of the +person using the client. This information is used only if the +protocol level is high enough to support session-level +passwords. +.PP +The variable \fBPASSWD_FILE\fR may contain the pathname +of a file to read the password from. A single line of input is +read and used as the password. +.SH "BUGS" +.PP +Passwords and other options containing , can not be handled. +For passwords an alternative way of passing them is in a credentials +file or in the PASSWD environment. +.PP +The credentials file does not handle usernames or passwords with +leading space. +.PP +Note that the typical response to a bug report is suggestion +to try the latest version first. So please try doing that first, +and always include which versions you use of relevant software +when reporting bugs (minimum: samba, kernel, distribution) +.SH "SEE ALSO" +.PP +Documentation/filesystems/cifs.txt in the linux kernel +source tree may contain additional options and information. +.SH "AUTHOR" +.PP +Steve French +The syntax and manpage were loosely based on that of smbmount. +.PP +The current maintainer of the Linux cifs vfs and the userspace +tool \fBmount.cifs\fR is Steve French <URL:mailto:sfrench@samba.org>. +The SAMBA Mailing list <URL:mailto:samba@samba.org> +is the preferred place to ask questions regarding these programs. diff --git a/packaging/Mandrake/samba2.spec.tmpl b/packaging/Mandrake/samba2.spec.tmpl index 5d8e03438e..c55da187de 100644 --- a/packaging/Mandrake/samba2.spec.tmpl +++ b/packaging/Mandrake/samba2.spec.tmpl @@ -13,7 +13,7 @@ # cvs should be submitted for inclusion in samba cvs. %define pkg_name samba -%define ver 3.0.0beta2 +%define ver 3.0.0beta3 %define rel 3mdk %define vscanver 0.3.3beta1 %define libsmbmajor 0 @@ -72,17 +72,22 @@ %define build_scanners 0 # CUPS supports functionality for 'printcap name = cups' (9.0 and later): %define build_cupspc 0 +# releases that have chrpath available in main +%define build_chrpath 0 # Set defaults for each version %if %build_mdk92 %define build_cupspc 1 +%define build_chrpath 1 %endif %if %build_mdk91 %define build_cupspc 1 +%define build_chrpath 1 %endif %if %build_mdk90 +%define build_chrpath 1 %endif %if %build_mdk82 @@ -171,6 +176,9 @@ %define message_bugzilla() %(echo -e -n "Please file bug reports for this package at Mandrake bugzilla \\n(http://qa.mandrakesoft.com) under the product name %{1}") %define message_system %(echo -e -n "NOTE: This is a prerelease of samba-%{samba_major}, not intended for production\\n use. Rather these packages are provided, parallel installable\\nwith samba-2.2.x, for testing purposes") +#check gcc version to disable some optimisations on gcc-3.3.1 +%define gcc331 %(gcc -dumpversion|awk '{if ($1>3.3) print 1; else print 0}') + %ifarch alpha %define build_expsam xml %else @@ -223,13 +231,12 @@ Source7: README.%{name}-mandrake-rpm Source8: samba-vscan-%{vscanver}.tar.bz2 %endif Source10: samba-print-pdf.sh.bz2 +Source11: mount.cifs.8.bz2 Patch1: smbw.patch.bz2 -Patch2: samba-2.2.0-gawk.patch.bz2 Patch3: samba-2.2.0-buildroot.patch.bz2 Patch4: samba-3.0-smbmount-sbin.patch.bz2 %if !%have_pversion # Version specific patches: current version -Patch100: samba-3.0.0beta2-mandrake-packaging.patch.bz2 %else # Version specific patches: upcoming version %endif @@ -255,6 +262,9 @@ BuildRequires: libldap-devel %if %build_ads BuildRequires: libldap-devel krb5-devel %endif +%if %build_chrpath +BuildRequires: chrpath +%endif BuildRoot: %{_tmppath}/%{name}-root Prefix: /usr Prereq: /sbin/chkconfig /bin/mktemp /usr/bin/killall @@ -748,13 +758,11 @@ echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7} %endif #%patch111 -p1 %patch1 -p1 -b .smbw -%patch2 -p1 -b .gawk %patch3 -p1 -b .buildroot %patch4 -p1 -b .sbin # Version specific patches: current version %if !%have_pversion echo "Applying patches for current version: %{ver}" -%patch100 -p1 -b .mdk %else # Version specific patches: upcoming version echo "Applying patches for new versions: %{pversion}" @@ -795,21 +803,27 @@ perl -pi -e 's/^# define SAMBA_VERSION_MAJOR 2/# define SAMBA_VERSION_MAJOR 3/g' perl -pi -e 's/%{pkg_name}/%{name}/g' source/auth/pampass.c %endif +#remove cvs internal files from docs: +find docs examples -name '.cvsignore' -exec rm -f {} \; + %build #%serverbuild (cd source -CFLAGS="$RPM_OPT_FLAGS" +CFLAGS=`echo "$RPM_OPT_FLAGS"|sed -e 's/-g//g'` +%if %gcc331 +#CFLAGS=`echo "$CFLAGS"|sed -e 's/-O2/-Os/g'` +%endif # Don't use --with-fhs now, since it overrides libdir, it sets configdir, # lockdir,piddir logfilebase,privatedir and swatdir %configure --prefix=%{_prefix} \ - --sysconfdir=/etc/%{name} \ + --sysconfdir=%{_sysconfdir}/%{name} \ --localstatedir=/var \ --libdir=%{_libdir}/%{name} \ - --with-privatedir=/etc/%{name} \ + --with-privatedir=%{_sysconfdir}/%{name} \ --with-lockdir=/var/cache/%{name} \ --with-piddir=/var/run/%{name} \ --with-swatdir=%{_datadir}/swat%{samba_major} \ - --with-configdir=/etc/%{name} \ + --with-configdir=%{_sysconfdir}/%{name} \ --with-logfilebase=/var/log/%{name} \ %if !%build_ads --with-ads=no \ @@ -846,7 +860,7 @@ perl -pi -e 's/-g //g' Makefile %endif make proto_exists -%make all libsmbclient smbfilter wins modules %{!?_without_test: torture debug2html} bin/editreg +%make all libsmbclient smbfilter wins modules %{!?_without_test: torture debug2html} bin/editreg client/mount.cifs # Build VFS modules (experimental) @@ -906,7 +920,7 @@ mkdir -p $RPM_BUILD_ROOT chmod a+r docs -R # Any entries here mean samba makefile is *really* broken: -mkdir -p $RPM_BUILD_ROOT/etc/%{name} +mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/%{name} mkdir -p $RPM_BUILD_ROOT/%{_datadir} mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs @@ -917,8 +931,8 @@ install -m755 source/bin/editreg %{buildroot}/%{_bindir} #need to stay mkdir -p $RPM_BUILD_ROOT/sbin -mkdir -p $RPM_BUILD_ROOT/etc/{logrotate.d,pam.d,xinetd.d} -mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d +mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/{logrotate.d,pam.d,xinetd.d} +mkdir -p $RPM_BUILD_ROOT/%{_initrddir} mkdir -p $RPM_BUILD_ROOT/var/cache/%{name} mkdir -p $RPM_BUILD_ROOT/var/log/%{name} mkdir -p $RPM_BUILD_ROOT/var/run/%{name} @@ -975,20 +989,20 @@ done # Install other stuff -# install -m644 examples/VFS/recycle/recycle.conf $RPM_BUILD_ROOT/etc/samba/ - install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT/etc/%{name}/smbusers +# install -m644 examples/VFS/recycle/recycle.conf $RPM_BUILD_ROOT%{_sysconfdir}/samba/ + install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/smbusers install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT/%{_bindir} #install -m755 packaging/RedHat/smbadduser $RPM_BUILD_ROOT/usr/bin install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT/%{_bindir} - install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/etc/rc.d/init.d/smb%{samba_major} + install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_initrddir}/smb%{samba_major} install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_sbindir}/%{name} - install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/etc/rc.d/init.d/winbind%{samba_major} -# install -m755 packaging/Mandrake/wrepld.init $RPM_BUILD_ROOT/etc/rc.d/init.d/wrepld%{samba_major} + install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_initrddir}/winbind%{samba_major} +# install -m755 packaging/Mandrake/wrepld.init $RPM_BUILD_ROOT/%{_initrddir}/wrepld%{samba_major} install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_sbindir}/winbind%{samba_major} - install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/etc/pam.d/%{name} - install -m644 packaging/Mandrake/system-auth-winbind.pamd $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major} + install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/%{name} + install -m644 packaging/Mandrake/system-auth-winbind.pamd $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/system-auth-winbind%{samba_major} # - install -m644 %{SOURCE1} $RPM_BUILD_ROOT/etc/logrotate.d/%{name} + install -m644 %{SOURCE1} $RPM_BUILD_ROOT/%{_sysconfdir}/logrotate.d/%{name} # install -m644 packaging/Mandrake/samba-slapd-include.conf $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/samba-slapd.include # Install smbldap-tools scripts: @@ -1018,15 +1032,15 @@ install -m755 examples/LDAP/convertSambaAccount $RPM_BUILD_ROOT/%{_datadir}/%{na # make a conf file for winbind from the default one: cat packaging/Mandrake/smb.conf|sed -e 's/^; winbind/ winbind/g;s/^; obey pam/ obey pam/g; s/^; printer admin = @"D/ printer admin = @"D/g;s/^; password server = \*/ password server = \*/g;s/^; template/ template/g; s/^ security = user/ security = domain/g' > packaging/Mandrake/smb-winbind.conf - install -m644 packaging/Mandrake/smb-winbind.conf $RPM_BUILD_ROOT/etc/%{name}/smb-winbind.conf + install -m644 packaging/Mandrake/smb-winbind.conf $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb-winbind.conf # Some inline fixes for smb.conf for non-winbind use -install -m644 packaging/Mandrake/smb.conf $RPM_BUILD_ROOT/etc/%{name}/smb.conf +install -m644 packaging/Mandrake/smb.conf $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf cat packaging/Mandrake/smb.conf | \ -sed -e 's/^; printer admin = @adm/ printer admin = @adm/g' >$RPM_BUILD_ROOT/etc/%{name}/smb.conf +sed -e 's/^; printer admin = @adm/ printer admin = @adm/g' >$RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf %if %build_cupspc -perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/etc/%{name}/smb.conf -perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/etc/%{name}/smb-winbind.conf +perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf +perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb-winbind.conf %endif # Link smbmount to /sbin/mount.smb and /sbin/mount.smbfs @@ -1035,7 +1049,12 @@ perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/et ln -s ..%{_bindir}/smbmount%{samba_major} mount.smb%{samba_major} ln -s ..%{_bindir}/smbmount%{samba_major} mount.smbfs%{samba_major} ) - echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/etc/%{name}/lmhosts + +#install mount.cifs +install -m755 source/client/mount.cifs %{buildroot}/sbin +bzcat %{SOURCE11} > %{buildroot}/%{_mandir}/man8/mount.cifs.8 + + echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/lmhosts # Link smbspool to CUPS (does not require installed CUPS) @@ -1044,8 +1063,8 @@ perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/et # xinetd support - mkdir -p $RPM_BUILD_ROOT/etc/xinetd.d - install -m644 %{SOURCE3} $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major} + mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d + install -m644 %{SOURCE3} $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d/swat%{samba_major} # menu support @@ -1075,6 +1094,10 @@ bzcat %{SOURCE6} > $RPM_BUILD_ROOT%{_miconsdir}/swat%{samba_major}.png bzcat %{SOURCE10}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/print-pdf +%if %build_chrpath +find %{buildroot}/%{_lib} %{buildroot}/%{_bindir} %{buildroot}/%{_sbindir} %{buildroot}/%{_libdir} -type f -exec chrpath -d {} \; +%endif + # Fix configs when not building system samba: %if !%build_system # Work around non-existent but claimed --program-suffix support :-( @@ -1095,15 +1118,15 @@ for OLD in $FILES; do done # Replace paths in config files and init scripts: for i in smb winbind;do - perl -pi -e 's,/subsys/'$i',/subsys/'$i'%{samba_major},g' $RPM_BUILD_ROOT/etc/rc.d/init.d/${i}%{samba_major} + perl -pi -e 's,/subsys/'$i',/subsys/'$i'%{samba_major},g' $RPM_BUILD_ROOT/%{_initrddir}/${i}%{samba_major} done -for i in /etc/%{name}/smb.conf /etc/rc.d/init.d/smb%{samba_major} %{_sbindir}/%{name} /etc/rc.d/init.d/winbind%{samba_major} %{_sbindir}/winbind%{samba_major} /etc/logrotate.d/%{name} /etc/xinetd.d/swat%{samba_major} /etc/rc.d/init.d/wrepld%{samba_major}; do +for i in %{_sysconfdir}/%{name}/smb.conf %{_initrddir}/smb%{samba_major} %{_sbindir}/%{name} %{_initrddir}/winbind%{samba_major} %{_sbindir}/winbind%{samba_major} /%{_sysconfdir}/logrotate.d/%{name} /%{_sysconfdir}/xinetd.d/swat%{samba_major} %{_initrddir}/wrepld%{samba_major}; do perl -pi -e 's,/%{pkg_name},/%{name},g; s,smbd,%{_sbindir}/smbd%{samba_major},g; s,nmbd,%{_sbindir}/nmbd%{samba_major},g; s,winbindd,%{_sbindir}/winbindd%{samba_major},g; s,/usr/sbin/swat,%{_sbindir}/swat%{samba_major},g;s,wrepld,%{_sbindir}/wrepld%{samba_major},g' $RPM_BUILD_ROOT/$i; done # Fix pam files -perl -pi -e 's/winbind/winbind%{samba_major}/g' $RPM_BUILD_ROOT/etc/pam.d/system-auth-winbind%{samba_major} +perl -pi -e 's/winbind/winbind%{samba_major}/g' $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/system-auth-winbind%{samba_major} # Fix xinetd file for swat: -perl -pi -e 's,/usr/sbin,%{_sbindir},g' $RPM_BUILD_ROOT/etc/xinetd.d/swat%{samba_major} +perl -pi -e 's,/usr/sbin,%{_sbindir},g' $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d/swat%{samba_major} %endif #Clean up unpackaged files: @@ -1145,12 +1168,12 @@ fi %post common # Basic migration script for pre-2.2.1 users, -# since smb config moved from /etc to /etc/samba +# since smb config moved from /etc to %{_sysconfdir}/samba -# Let's create a proper /etc/samba/smbpasswd file -[ -f /etc/%{name}/smbpasswd ] || { +# Let's create a proper %{_sysconfdir}/samba/smbpasswd file +[ -f %{_sysconfdir}/%{name}/smbpasswd ] || { echo "Creating password file for samba..." - touch /etc/%{name}/smbpasswd + touch %{_sysconfdir}/%{name}/smbpasswd } # And this too, in case we don't have smbd to create it for us @@ -1159,46 +1182,46 @@ fi } # Let's define the proper paths for config files -perl -pi -e 's/(\/etc\/)(smb)/\1%{name}\/\2/' /etc/%{name}/smb.conf +perl -pi -e 's/(\/etc\/)(smb)/\1%{name}\/\2/' %{_sysconfdir}/%{name}/smb.conf # Let's replace lpstat with cups in older smb.conf: %if %build_cupspc echo "Updating samba printing configuration if necessary..." -perl -pi -e 's/= lpstat/= cups/' /etc/%{name}/smb.conf +perl -pi -e 's/= lpstat/= cups/' %{_sysconfdir}/%{name}/smb.conf %endif # Fix the logrotate.d file from smb and nmb to smbd and nmbd -if [ -f /etc/logrotate.d/samba ]; then - perl -pi -e 's/smb /smbd /' /etc/logrotate.d/samba - perl -pi -e 's/nmb /nmbd /' /etc/logrotate.d/samba +if [ -f %{_sysconfdir}/logrotate.d/samba ]; then + perl -pi -e 's/smb /smbd /' %{_sysconfdir}/logrotate.d/samba + perl -pi -e 's/nmb /nmbd /' %{_sysconfdir}/logrotate.d/samba fi # And not loose our machine account SID -[ -f /etc/MACHINE.SID ] && mv -f /etc/MACHINE.SID /etc/%{name}/ ||: +[ -f %{_sysconfdir}/MACHINE.SID ] && mv -f %{_sysconfdir}/MACHINE.SID %{_sysconfdir}/%{name}/ ||: %if %build_winbind %post winbind if [ $1 = 1 ]; then /sbin/chkconfig winbind%{samba_major} on - cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave - cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp + cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmsave + cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmtemp for i in passwd group;do - grep ^$i /etc/nsswitch.conf |grep -v 'winbind%{samba_major}' >/dev/null + grep ^$i %{_sysconfdir}/nsswitch.conf |grep -v 'winbind%{samba_major}' >/dev/null if [ $? = 0 ];then - echo "Adding a winbind%{samba_major} entry to the $i section of /etc/nsswitch.conf" - awk '/^'$i'/ {print $0 " winbind%{samba_major}"};!/^'$i'/ {print}' /etc/nsswitch.conf.rpmtemp >/etc/nsswitch.conf; - cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmtemp + echo "Adding a winbind%{samba_major} entry to the $i section of %{_sysconfdir}/nsswitch.conf" + awk '/^'$i'/ {print $0 " winbind%{samba_major}"};!/^'$i'/ {print}' %{_sysconfdir}/nsswitch.conf.rpmtemp >%{_sysconfdir}/nsswitch.conf; + cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmtemp else - echo "$i entry found in /etc/nsswitch.conf" + echo "$i entry found in %{_sysconfdir}/nsswitch.conf" fi done - if [ -f /etc/nsswitch.conf.rpmtemp ];then rm -f /etc/nsswitch.conf.rpmtemp;fi + if [ -f %{_sysconfdir}/nsswitch.conf.rpmtemp ];then rm -f %{_sysconfdir}/nsswitch.conf.rpmtemp;fi fi %preun winbind if [ $1 = 0 ]; then - echo "Removing winbind%{samba_major} entries from /etc/nsswitch.conf" - perl -pi -e 's/ winbind%{samba_major}//' /etc/nsswitch.conf + echo "Removing winbind%{samba_major} entries from %{_sysconfdir}/nsswitch.conf" + perl -pi -e 's/ winbind%{samba_major}//' %{_sysconfdir}/nsswitch.conf /sbin/chkconfig winbind%{samba_major} reset fi @@ -1207,13 +1230,13 @@ fi %if %build_wins %post -n nss_wins%{samba_major} if [ $1 = 1 ]; then - cp -af /etc/nsswitch.conf /etc/nsswitch.conf.rpmsave - grep '^hosts' /etc/nsswitch.conf |grep -v 'wins%{samba_major}' >/dev/null + cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmsave + grep '^hosts' %{_sysconfdir}/nsswitch.conf |grep -v 'wins%{samba_major}' >/dev/null if [ $? = 0 ];then - echo "Adding a wins entry to the hosts section of /etc/nsswitch.conf" - awk '/^hosts/ {print $0 " wins%{samba_major}"};!/^hosts/ {print}' /etc/nsswitch.conf.rpmsave >/etc/nsswitch.conf; + echo "Adding a wins entry to the hosts section of %{_sysconfdir}/nsswitch.conf" + awk '/^hosts/ {print $0 " wins%{samba_major}"};!/^hosts/ {print}' %{_sysconfdir}/nsswitch.conf.rpmsave >%{_sysconfdir}/nsswitch.conf; else - echo "wins entry found in /etc/nsswitch.conf" + echo "wins entry found in %{_sysconfdir}/nsswitch.conf" fi # else # echo "Upgrade, leaving nsswitch.conf intact" @@ -1221,10 +1244,10 @@ fi %preun -n nss_wins%{samba_major} if [ $1 = 0 ]; then - echo "Removing wins entry from /etc/nsswitch.conf" - perl -pi -e 's/ wins%{samba_major}//' /etc/nsswitch.conf + echo "Removing wins entry from %{_sysconfdir}/nsswitch.conf" + perl -pi -e 's/ wins%{samba_major}//' %{_sysconfdir}/nsswitch.conf #else -# echo "Leaving /etc/nsswitch.conf intact" +# echo "Leaving %{_sysconfdir}/nsswitch.conf intact" fi %endif %build_wins @@ -1260,8 +1283,8 @@ fi %postun swat # Remove swat entry from xinetd -if [ $1 = 0 -a -f /etc/xinetd.conf ] ; then -rm -f /etc/xinetd.d/swat%{samba_major} +if [ $1 = 0 -a -f %{_sysconfdir}/xinetd.conf ] ; then +rm -f %{_sysconfdir}/xinetd.d/swat%{samba_major} service xinetd reload &>/dev/null || : fi @@ -1280,7 +1303,7 @@ fi if [ $1 != 0 ]; then [ ! -d /var/lock/samba ] && mkdir -m 0755 /var/lock/samba ||: [ ! -d /var/spool/samba ] && mkdir -m 1777 /var/spool/samba ||: - [ -f /etc/inetd.conf ] && chmod 644 /etc/services /etc/inetd.conf ||: + [ -f %{_sysconfdir}/inetd.conf ] && chmod 644 %{_sysconfdir}/services %{_sysconfdir}/inetd.conf ||: fi %files server @@ -1302,13 +1325,12 @@ fi %{_libdir}/%{name}/vfs/*.so %dir %{_libdir}/%{name}/pdb -#/usr/share/swat -%attr(-,root,root) %config(noreplace) /etc/%{name}/smbusers -%attr(-,root,root) %config %{_initrddir}/smb%{samba_major} -#%attr(-,root,root) %config %{_initrddir}/wrepld%{samba_major} -%attr(-,root,root) %config(noreplace) /etc/logrotate.d/%{name} -%attr(-,root,root) %config(noreplace) /etc/pam.d/%{name} -#%attr(-,root,root) %config(noreplace) /etc/%{name}/samba-slapd.include +%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smbusers +%attr(-,root,root) %config(noreplace) %{_initrddir}/smb%{samba_major} +#%attr(-,root,root) %config(noreplace) %{_initrddir}/wrepld%{samba_major} +%attr(-,root,root) %config(noreplace) %{_sysconfdir}/logrotate.d/%{name} +%attr(-,root,root) %config(noreplace) %{_sysconfdir}/pam.d/%{name} +#%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/samba-slapd.include %{_mandir}/man1/smbstatus*.1* %{_mandir}/man5/smbpasswd*.5* %{_mandir}/man7/samba*.7* @@ -1319,9 +1341,10 @@ fi %{_mandir}/man8/tdbbackup*.8* %{_mandir}/man1/profiles*.1* %{_mandir}/man1/editreg*.1* -%attr(775,root,root) %dir %{_localstatedir}/%{name}/netlogon -%attr(775,root,root) %dir %{_localstatedir}/%{name}/profiles -%attr(775,root,root) %dir %{_localstatedir}/%{name}/printers +%attr(775,root,adm) %dir %{_localstatedir}/%{name}/netlogon +%attr(755,root,root) %dir %{_localstatedir}/%{name}/profiles +%attr(755,root,root) %dir %{_localstatedir}/%{name}/printers +%attr(775,root,adm) %dir %{_localstatedir}/%{name}/printers/* %attr(1777,root,root) %dir /var/spool/%{name} %dir %{_datadir}/%{name} %dir %{_datadir}/%{name}/scripts @@ -1341,36 +1364,38 @@ fi %doc README.%{name}-mandrake-rpm %doc docs %doc examples -%doc swat/README -%attr(-,root,root) %{_datadir}/swat%{samba_major}/using_samba/* +%attr(-,root,root) %{_datadir}/swat%{samba_major}/using_samba/ %files swat %defattr(-,root,root) -%config(noreplace) /etc/xinetd.d/swat%{samba_major} +%config(noreplace) %{_sysconfdir}/xinetd.d/swat%{samba_major} #%attr(-,root,root) /sbin/* %{_sbindir}/swat%{samba_major} %{_menudir}/%{name}-swat %{_miconsdir}/*.png %{_liconsdir}/*.png %{_iconsdir}/*.png -%attr(-,root,root) %{_datadir}/swat%{samba_major}/help/* -%attr(-,root,root) %{_datadir}/swat%{samba_major}/images/* -%attr(-,root,root) %{_datadir}/swat%{samba_major}/include/* +%attr(-,root,root) %{_datadir}/swat%{samba_major}/help/ +%attr(-,root,root) %{_datadir}/swat%{samba_major}/images/ +%attr(-,root,root) %{_datadir}/swat%{samba_major}/include/ %lang(ja) %{_datadir}/swat%{samba_major}/lang/ja %lang(tr) %{_datadir}/swat%{samba_major}/lang/tr %{_mandir}/man8/swat*.8* +%doc swat/README %files client %defattr(-,root,root) %ifnarch alpha /sbin/mount.smb%{samba_major} /sbin/mount.smbfs%{samba_major} +/sbin/mount.cifs %attr(755,root,root) %{_bindir}/smbmount%{samba_major} %attr(4755,root,root) %{_bindir}/smbumount%{samba_major} %attr(4755,root,root) %{_bindir}/smbmnt%{samba_major} %{_mandir}/man8/smbmnt*.8* %{_mandir}/man8/smbmount*.8* %{_mandir}/man8/smbumount*.8* +%{_mandir}/man8/mount.cifs*.8* %else %exclude %{_bindir}/smb*m*nt%{samba_major} %exclude %{_mandir}/man8/smb*m*nt*.8* @@ -1432,6 +1457,7 @@ fi %{_mandir}/man1/smbtree*.1* %{_mandir}/man1/ntlm_auth*.1* %{_mandir}/man7/Samba*.7* +%dir %{_datadir}/swat%{samba_major} %if %build_winbind %files winbind @@ -1441,8 +1467,8 @@ fi %{_bindir}/wbinfo%{samba_major} %attr(755,root,root) /%{_lib}/security/pam_winbind* %attr(755,root,root) /%{_lib}/libnss_winbind%{samba_major}* -%attr(-,root,root) %config /etc/rc.d/init.d/winbind%{samba_major} -%attr(-,root,root) %config(noreplace) /etc/pam.d/system-auth-winbind* +%attr(-,root,root) %config(noreplace) %{_initrddir}/winbind%{samba_major} +%attr(-,root,root) %config(noreplace) %{_sysconfdir}/pam.d/system-auth-winbind* %{_mandir}/man8/winbindd*.8* %{_mandir}/man1/wbinfo*.1* %endif @@ -1567,6 +1593,19 @@ fi %exclude %{_mandir}/man1/smbsh*.1* %changelog +* Mon Jul 28 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta3.3mdk +- Rebuild for kerberos-1.3 on cooker +- Put printer directories back +- Add mount.cifs +- Go back to standard optimisations + +* Thu Jul 17 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta3.2mdk +- beta3 +- remove -g from cflags to avoid large static libraries +- drop optimisation from O2 to O1 for gcc 3.3.1 +- own some directories for distriblint's benefit +- use chrpath on distro's that have it to drastically reduce rpmlint score + * Mon Jul 14 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta2.3mdk - place non-conditional excludes at the end of files list, to prevent causing rpm in Mandrake <=8.2 from segfaulting when processing files. |