11 files changed, 639 insertions, 0 deletions
diff --git a/packaging/RHEL4-CTDB/setup/filter-requires-samba.sh b/packaging/RHEL4-CTDB/setup/filter-requires-samba.sh
new file mode 100644
index 0000000000..f90085ce35
--- /dev/null
+++ b/packaging/RHEL4-CTDB/setup/filter-requires-samba.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+/usr/lib/rpm/perl.req $* | grep -E -v '(Net::LDAP|Crypt::SmbHash|CGI|Unicode::MapUTF8)'
+
diff --git a/packaging/RHEL4-CTDB/setup/samba.log b/packaging/RHEL4-CTDB/setup/samba.log
new file mode 100644
index 0000000000..a3c000ea78
--- /dev/null
+++ b/packaging/RHEL4-CTDB/setup/samba.log
@@ -0,0 +1,9 @@
+/var/log/samba/*.log /var/log/samba/log.smbd /var/log/samba/log.nmbd {
+    notifempty
+    missingok
+    sharedscripts
+    copytruncate
+    postrotate
+	/bin/kill -HUP `cat /var/run/smbd.pid /var/run/nmbd.pid /var/run/winbindd.pid 2> /dev/null` 2> /dev/null || true
+    endscript
+}
diff --git a/packaging/RHEL4-CTDB/setup/samba.pamd b/packaging/RHEL4-CTDB/setup/samba.pamd
new file mode 100644
index 0000000000..8c529da3a1
--- /dev/null
+++ b/packaging/RHEL4-CTDB/setup/samba.pamd
@@ -0,0 +1,4 @@
+auth	 required	pam_stack.so service=system-auth
+session  required	pam_stack.so service=system-auth
+account	 required	pam_stack.so service=system-auth
+password required	pam_stack.so service=system-auth
diff --git a/packaging/RHEL4-CTDB/setup/samba.sysconfig b/packaging/RHEL4-CTDB/setup/samba.sysconfig
new file mode 100644
index 0000000000..944b72fcc2
--- /dev/null
+++ b/packaging/RHEL4-CTDB/setup/samba.sysconfig
@@ -0,0 +1,6 @@
+# Options to smbd
+SMBDOPTIONS="-D"
+# Options to nmbd
+NMBDOPTIONS="-D"
+# Options for winbindd
+WINBINDOPTIONS=""
diff --git a/packaging/RHEL4-CTDB/setup/smb.conf b/packaging/RHEL4-CTDB/setup/smb.conf
new file mode 100644
index 0000000000..971ca19c83
--- /dev/null
+++ b/packaging/RHEL4-CTDB/setup/smb.conf
@@ -0,0 +1,271 @@
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options listed
+# here. Samba has a huge number of configurable options (perhaps too
+# many!) most of which are not shown in this example
+#
+# For a step to step guide on installing, configuring and using samba, 
+# read the Samba-HOWTO-Collection. This may be obtained from:
+#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
+#
+# Many working examples of smb.conf files can be found in the 
+# Samba-Guide which is generated daily and can be downloaded from: 
+#  http://www.samba.org/samba/docs/Samba-Guide.pdf
+#
+# Any line which starts with a ; (semi-colon) or a # (hash) 
+# is a comment and is ignored. In this example we will use a #
+# for commentry and a ; for parts of the config file that you
+# may wish to enable
+#
+# NOTE: Whenever you modify this file you should run the command "testparm"
+# to check that you have not made any basic syntactic errors. 
+#
+#======================= Global Settings =====================================
+[global]
+
+# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
+   workgroup = MYGROUP
+
+# server string is the equivalent of the NT Description field
+   server string = Samba Server
+
+# Security mode. Defines in which mode Samba will operate. Possible 
+# values are share, user, server, domain and ads. Most people will want 
+# user level security. See the Samba-HOWTO-Collection for details.
+   security = user
+
+# This option is important for security. It allows you to restrict
+# connections to machines which are on your local network. The
+# following example restricts access to two C class networks and
+# the "loopback" interface. For more examples of the syntax see
+# the smb.conf man page
+;   hosts allow = 192.168.1. 192.168.2. 127.
+
+# If you want to automatically load your printer list rather
+# than setting them up individually then you'll need this
+   load printers = yes
+
+# you may wish to override the location of the printcap file
+;   printcap name = /etc/printcap
+
+# on SystemV system setting printcap name to lpstat should allow
+# you to automatically obtain a printer list from the SystemV spool
+# system
+;   printcap name = lpstat
+
+# It should not be necessary to specify the print system type unless
+# it is non-standard. Currently supported print systems include:
+# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
+;   printing = cups
+
+# Uncomment this if you want a guest account, you must add this to /etc/passwd
+# otherwise the user "nobody" is used
+;  guest account = pcguest
+
+# this tells Samba to use a separate log file for each machine
+# that connects
+   log file = /usr/local/samba/var/log.%m
+
+# Put a capping on the size of the log files (in Kb).
+   max log size = 50
+
+# Use password server option only with security = server
+# The argument list may include:
+#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
+# or to auto-locate the domain controller/s
+#   password server = *
+;   password server = <NT-Server-Name>
+
+# Use the realm option only with security = ads
+# Specifies the Active Directory realm the host is part of
+;   realm = MY_REALM
+
+# Backend to store user information in. New installations should 
+# use either tdbsam or ldapsam. smbpasswd is available for backwards 
+# compatibility. tdbsam requires no further configuration.
+;   passdb backend = tdbsam
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting.
+# Note: Consider carefully the location in the configuration file of
+#       this line.  The included file is read at that point.
+;   include = /usr/local/samba/lib/smb.conf.%m
+
+# Configure Samba to use multiple interfaces
+# If you have multiple network interfaces then you must list them
+# here. See the man page for details.
+;   interfaces = 192.168.12.2/24 192.168.13.2/24 
+
+# Browser Control Options:
+# set local master to no if you don't want Samba to become a master
+# browser on your network. Otherwise the normal election rules apply
+;   local master = no
+
+# OS Level determines the precedence of this server in master browser
+# elections. The default value should be reasonable
+;   os level = 33
+
+# Domain Master specifies Samba to be the Domain Master Browser. This
+# allows Samba to collate browse lists between subnets. Don't use this
+# if you already have a Windows NT domain controller doing this job
+;   domain master = yes 
+
+# Preferred Master causes Samba to force a local browser election on startup
+# and gives it a slightly higher chance of winning the election
+;   preferred master = yes
+
+# Enable this if you want Samba to be a domain logon server for 
+# Windows95 workstations. 
+;   domain logons = yes
+
+# if you enable domain logons then you may want a per-machine or
+# per user logon script
+# run a specific logon batch file per workstation (machine)
+;   logon script = %m.bat
+# run a specific logon batch file per username
+;   logon script = %U.bat
+
+# Where to store roving profiles (only for Win95 and WinNT)
+#        %L substitutes for this servers netbios name, %U is username
+#        You must uncomment the [Profiles] share below
+;   logon path = \\%L\Profiles\%U
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
+;   wins support = yes
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+;   wins server = w.x.y.z
+
+# WINS Proxy - Tells Samba to answer name resolution queries on
+# behalf of a non WINS capable client, for this to work there must be
+# at least one	WINS Server on the network. The default is NO.
+;   wins proxy = yes
+
+# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
+# via DNS nslookups. The default is NO.
+   dns proxy = no 
+
+# These scripts are used on a domain controller or stand-alone 
+# machine to add or delete corresponding unix accounts
+;  add user script = /usr/sbin/useradd %u
+;  add group script = /usr/sbin/groupadd %g
+;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
+;  delete user script = /usr/sbin/userdel %u
+;  delete user from group script = /usr/sbin/deluser %u %g
+;  delete group script = /usr/sbin/groupdel %g
+
+
+#============================ Share Definitions ==============================
+[homes]
+   comment = Home Directories
+   browseable = no
+   writable = yes
+
+# Un-comment the following and create the netlogon directory for Domain Logons
+; [netlogon]
+;   comment = Network Logon Service
+;   path = /usr/local/samba/lib/netlogon
+;   guest ok = yes
+;   writable = no
+;   share modes = no
+
+
+# Un-comment the following to provide a specific roving profile share
+# the default is to use the user's home directory
+;[Profiles]
+;    path = /usr/local/samba/profiles
+;    browseable = no
+;    guest ok = yes
+
+
+# NOTE: If you have a BSD-style print system there is no need to 
+# specifically define each individual printer
+[printers]
+   comment = All Printers
+   path = /usr/spool/samba
+   browseable = no
+# Set public = yes to allow user 'guest account' to print
+   guest ok = no
+   writable = no
+   printable = yes
+
+# This one is useful for people to share files
+;[tmp]
+;   comment = Temporary file space
+;   path = /tmp
+;   read only = no
+;   public = yes
+
+# A publicly accessible directory, but read only, except for people in
+# the "staff" group
+;[public]
+;   comment = Public Stuff
+;   path = /home/samba
+;   public = yes
+;   writable = yes
+;   printable = no
+;   write list = @staff
+
+# Other examples. 
+#
+# A private printer, usable only by fred. Spool data will be placed in fred's
+# home directory. Note that fred must have write access to the spool directory,
+# wherever it is.
+;[fredsprn]
+;   comment = Fred's Printer
+;   valid users = fred
+;   path = /homes/fred
+;   printer = freds_printer
+;   public = no
+;   writable = no
+;   printable = yes
+
+# A private directory, usable only by fred. Note that fred requires write
+# access to the directory.
+;[fredsdir]
+;   comment = Fred's Service
+;   path = /usr/somewhere/private
+;   valid users = fred
+;   public = no
+;   writable = yes
+;   printable = no
+
+# a service which has a different directory for each machine that connects
+# this allows you to tailor configurations to incoming machines. You could
+# also use the %U option to tailor it by user name.
+# The %m gets replaced with the machine name that is connecting.
+;[pchome]
+;  comment = PC Directories
+;  path = /usr/pc/%m
+;  public = no
+;  writable = yes
+
+# A publicly accessible directory, read/write to all users. Note that all files
+# created in the directory by users will be owned by the default user, so
+# any user with access can delete any other user's files. Obviously this
+# directory must be writable by the default user. Another user could of course
+# be specified, in which case all files would be owned by that user instead.
+;[public]
+;   path = /usr/somewhere/else/public
+;   public = yes
+;   only guest = yes
+;   writable = yes
+;   printable = no
+
+# The following two entries demonstrate how to share a directory so that two
+# users can place files there that will be owned by the specific users. In this
+# setup, the directory should be writable by both users and should have the
+# sticky bit set on it to prevent abuse. Obviously this could be extended to
+# as many users as required.
+;[myshare]
+;   comment = Mary's and Fred's stuff
+;   path = /usr/somewhere/shared
+;   valid users = mary fred
+;   public = no
+;   writable = yes
+;   printable = no
+;   create mask = 0765
+
+
diff --git a/packaging/RHEL4-CTDB/setup/smb.init b/packaging/RHEL4-CTDB/setup/smb.init
new file mode 100644
index 0000000000..af85b2c079
--- /dev/null
+++ b/packaging/RHEL4-CTDB/setup/smb.init
@@ -0,0 +1,135 @@
+#!/bin/sh
+#
+# chkconfig: - 91 35
+# description: Starts and stops the Samba smbd and nmbd daemons \
+#	       used to provide SMB network services.
+#
+# pidfile: /var/run/samba/smbd.pid
+# pidfile: /var/run/samba/nmbd.pid
+# config:  /etc/samba/smb.conf
+
+
+# Source function library.
+if [ -f /etc/init.d/functions ] ; then
+  . /etc/init.d/functions
+elif [ -f /etc/rc.d/init.d/functions ] ; then
+  . /etc/rc.d/init.d/functions
+else
+  exit 0
+fi
+
+# Avoid using root's TMPDIR
+unset TMPDIR
+
+# Source networking configuration.
+. /etc/sysconfig/network
+
+if [ -f /etc/sysconfig/samba ]; then
+   . /etc/sysconfig/samba
+fi
+
+# Check that networking is up.
+[ ${NETWORKING} = "no" ] && exit 0
+
+# Check that smb.conf exists.
+[ -f /etc/samba/smb.conf ] || exit 0
+
+# Check that we can write to it... so non-root users stop here
+[ -w /etc/samba/smb.conf ] || exit 0
+
+# Check whether "netbios disabled" is true
+ISNETBIOSDISABLED=$(testparm -s 2>/dev/null | \
+	sed -n '/\[global\]/,/^$/p' | \
+	grep "disable netbios = Yes" | \
+	awk 'BEGIN{FS=" = "}{print $2}')
+
+
+RETVAL=0
+
+
+start() {
+	KIND="SMB"
+	echo -n $"Starting $KIND services: "
+	daemon smbd $SMBDOPTIONS
+	RETVAL=$?
+	echo
+	KIND="NMB"
+	if [ x"$ISNETBIOSDISABLED" != x"Yes" ]; then
+		echo -n $"Starting $KIND services: "
+		daemon nmbd $NMBDOPTIONS
+		RETVAL2=$?
+		echo
+		[ $RETVAL -eq 0 -a $RETVAL2 -eq 0 ] && touch /var/lock/subsys/smb || \
+			RETVAL=1
+	else
+		[ $RETVAL -eq 0 ] && touch /var/lock/subsys/smb || \
+			RETVAL=1
+	fi
+	return $RETVAL
+}	
+
+stop() {
+	KIND="SMB"
+	echo -n $"Shutting down $KIND services: "
+	killproc smbd
+	RETVAL=$?
+	[ $RETVAL -eq 0 ] && rm -f /var/run/smbd.pid
+	echo
+	KIND="NMB"
+	if [ x"$ISNETBIOSDISABLED" != x"Yes" ]; then
+		echo -n $"Shutting down $KIND services: "
+		killproc nmbd 
+		RETVAL2=$?
+		[ $RETVAL2 -eq 0 ] && rm -f /var/run/nmbd.pid
+		[ $RETVAL -eq 0 -a $RETVAL2 -eq 0 ] && rm -f /var/lock/subsys/smb 
+		echo ""
+	else
+		[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/smb 
+		echo ""
+	fi
+	return $RETVAL
+}	
+
+restart() {
+	stop
+	start
+}	
+
+reload() {
+        echo -n $"Reloading smb.conf file: "
+	killproc smbd -HUP
+	RETVAL=$?
+	echo
+	return $RETVAL
+}	
+
+rhstatus() {
+	status smbd
+	status nmbd
+}	
+
+case "$1" in
+  start)
+  	start
+	;;
+  stop)
+  	stop
+	;;
+  restart)
+  	restart
+	;;
+  reload)
+  	reload
+	;;
+  status)
+  	rhstatus
+	;;
+  condrestart)
+  	[ -f /var/lock/subsys/smb ] && restart || :
+	;;
+  *)
+	echo $"Usage: $0 {start|stop|restart|reload|status|condrestart}"
+	exit 1
+esac
+
+exit $?
diff --git a/packaging/RHEL4-CTDB/setup/smbprint b/packaging/RHEL4-CTDB/setup/smbprint
new file mode 100644
index 0000000000..1c3959d49b
--- /dev/null
+++ b/packaging/RHEL4-CTDB/setup/smbprint
@@ -0,0 +1,84 @@
+#!/bin/sh
+# This script is an input filter for printcap printing on a unix machine. It
+# uses the smbclient program to print the file to the specified smb-based 
+# server and service.
+# For example you could have a printcap entry like this
+#
+# smb:lp=/dev/null:sd=/usr/spool/smb:sh:if=/usr/local/samba/smbprint
+#
+# which would create a unix printer called "smb" that will print via this 
+# script. You will need to create the spool directory /usr/spool/smb with
+# appropriate permissions and ownerships for your system.
+
+# Set these to the server and service you wish to print to 
+# In this example I have a WfWg PC called "lapland" that has a printer 
+# exported called "printer" with no password.
+
+#
+# Script further altered by hamiltom@ecnz.co.nz (Michael Hamilton)
+# so that the server, service, and password can be read from 
+# a /usr/var/spool/lpd/PRINTNAME/.config file.
+#
+# In order for this to work the /etc/printcap entry must include an 
+# accounting file (af=...):
+#
+#   cdcolour:\
+#	:cm=CD IBM Colorjet on 6th:\
+#	:sd=/var/spool/lpd/cdcolour:\
+#	:af=/var/spool/lpd/cdcolour/acct:\
+#	:if=/usr/local/etc/smbprint:\
+#	:mx=0:\
+#	:lp=/dev/null:
+#
+# The /usr/var/spool/lpd/PRINTNAME/.config file should contain:
+#   share=PC_SERVER
+#   user="user"
+#   password="password"
+#
+# Please, do not modify the order in the file.
+# Example:
+#   share=\\server\deskjet
+#   user="fred"
+#   password=""
+
+#
+# The last parameter to the filter is the accounting file name.
+#   Extract the directory name from the file name.
+#   Concat this with /.config to get the config file.
+#
+eval acct_file=\${$#}
+spool_dir=`dirname $acct_file` 
+config_file=$spool_dir/.config
+
+# Should read the following variables set in the config file:
+#   share
+#   hostip
+#   user
+#   password
+
+eval `cat $config_file`
+
+share=`echo $share | sed "s/[\]/\//g"`
+
+if [ "$user" != "" ]; then
+   usercmd="-U"
+else
+   usercmd=""
+fi
+
+if [ "$workgroup" != "" ]; then
+   workgroupcmd="-W"
+else
+   workgroupcmd=""
+fi
+
+if [ "$translate" = "yes" ]; then
+ command="translate ; print -"
+else
+ command="print -"
+fi
+#echo $share $password $translate $x_command > /tmp/smbprint.log
+
+cat | /usr/bin/smbclient "$share" "$password" -E ${hostip:+-I} \
+     $hostip -N -P $usercmd "$user" $workgroupcmd "$workgroup" \
+     -c "$command" 2>/dev/null
diff --git a/packaging/RHEL4-CTDB/setup/smbusers b/packaging/RHEL4-CTDB/setup/smbusers
new file mode 100644
index 0000000000..ae3389f53f
--- /dev/null
+++ b/packaging/RHEL4-CTDB/setup/smbusers
@@ -0,0 +1,3 @@
+# Unix_name = SMB_name1 SMB_name2 ...
+root = administrator admin
+nobody = guest pcguest smbguest
diff --git a/packaging/RHEL4-CTDB/setup/swat b/packaging/RHEL4-CTDB/setup/swat
new file mode 100644
index 0000000000..8b62348dde
--- /dev/null
+++ b/packaging/RHEL4-CTDB/setup/swat
@@ -0,0 +1,15 @@
+# default: off
+# description: SWAT is the Samba Web Admin Tool. Use swat \
+#	       to configure your Samba server. To use SWAT, \
+#	       connect to port 901 with your favorite web browser.
+service swat
+{
+	port		= 901
+	socket_type	= stream
+	wait 		= no
+	only_from 	= 127.0.0.1
+	user		= root
+	server		= /usr/sbin/swat
+	log_on_failure	+= USERID
+	disable		= yes
+}
diff --git a/packaging/RHEL4-CTDB/setup/swat.desktop b/packaging/RHEL4-CTDB/setup/swat.desktop
new file mode 100644
index 0000000000..0d7b4b5c48
--- /dev/null
+++ b/packaging/RHEL4-CTDB/setup/swat.desktop
@@ -0,0 +1,8 @@
+[Desktop Entry]
+Name=Samba Configuration
+Name[de]=Samba Konfiguration
+Type=Application
+Comment=Configure Samba with a web based interface
+Exec=htmlview http://127.0.0.1:901/
+Terminal=false
+Categories=X-Red-Hat-Extra;Application;System;X-Red-Hat-ServerConfig;
diff --git a/packaging/RHEL4-CTDB/setup/winbind.init b/packaging/RHEL4-CTDB/setup/winbind.init
new file mode 100644
index 0000000000..a99038f9c7
--- /dev/null
+++ b/packaging/RHEL4-CTDB/setup/winbind.init
@@ -0,0 +1,100 @@
+#!/bin/sh
+#
+# chkconfig: - 91 35
+# description: Starts and stops the Samba winbind daemon
+#	       #
+# pidfile: /var/cache/samba/winbind.pid
+# config:  /etc/samba/smb.conf
+
+
+# Source function library.
+if [ -f /etc/init.d/functions ] ; then
+  . /etc/init.d/functions
+elif [ -f /etc/rc.d/init.d/functions ] ; then
+  . /etc/rc.d/init.d/functions
+else
+  exit 0
+fi
+
+# Avoid using root's TMPDIR
+unset TMPDIR
+
+# Source networking configuration.
+. /etc/sysconfig/network
+
+if [ -f /etc/sysconfig/samba ]; then
+   . /etc/sysconfig/samba
+fi
+
+# Check that networking is up.
+[ ${NETWORKING} = "no" ] && exit 0
+
+# Check that smb.conf exists.
+[ -f /etc/samba/smb.conf ] || exit 0
+
+RETVAL=0
+
+
+start() {
+        KIND="Winbind"
+	echo -n $"Starting $KIND services: "
+	daemon winbindd "$WINBINDOPTIONS"
+	RETVAL=$?
+	echo
+	[ $RETVAL -eq 0 ] && touch /var/lock/subsys/winbindd || RETVAL=1
+	return $RETVAL
+}	
+
+stop() {
+        echo
+	KIND="Winbind"
+	echo -n $"Shutting down $KIND services: "
+	killproc winbindd
+	RETVAL=$?
+	[ $RETVAL -eq 0 ] && rm -f /var/run/winbindd.pid && rm -f /var/lock/subsys/winbindd
+	echo ""
+	return $RETVAL
+}	
+
+restart() {
+	stop
+	start
+}	
+
+reload() {
+        echo -n $"Reloading smb.conf file: "
+	killproc winbindd -HUP
+	RETVAL=$?
+	echo
+	return $RETVAL
+}	
+
+rhstatus() {
+	status winbindd
+}	
+
+case "$1" in
+  start)
+  	start
+	;;
+  stop)
+  	stop
+	;;
+  restart)
+  	restart
+	;;
+  reload)
+  	reload
+	;;
+  status)
+  	rhstatus
+	;;
+  condrestart)
+  	[ -f /var/lock/subsys/winbindd ] && restart || :
+	;;
+  *)
+	echo $"Usage: $0 {start|stop|restart|reload|status|condrestart}"
+	exit 1
+esac
+
+exit $?