5 files changed, 12 insertions, 93 deletions
diff --git a/packaging/RHEL-CTDB/samba.spec.tmpl b/packaging/RHEL-CTDB/samba.spec.tmpl
index 61a5bdd06f..16d2fa43cb 100644
--- a/packaging/RHEL-CTDB/samba.spec.tmpl
+++ b/packaging/RHEL-CTDB/samba.spec.tmpl
@@ -290,7 +290,7 @@ install -m644 setup/samba.sysconfig $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/samb
 install -m755 setup/smb.init $RPM_BUILD_ROOT%{initdir}/smb
 install -m755 setup/winbind.init $RPM_BUILD_ROOT%{initdir}/winbind
 install -m644 setup/samba.pamd $RPM_BUILD_ROOT%{_sysconfdir}/pam.d/samba
-install -m755 setup/smbprint $RPM_BUILD_ROOT%{_bindir}
+install -m755 packaging/printing/smbprint $RPM_BUILD_ROOT%{_bindir}
 install -m644 setup/smbusers $RPM_BUILD_ROOT%{_sysconfdir}/samba/smbusers
 install -m644 setup/smb.conf $RPM_BUILD_ROOT%{_sysconfdir}/samba/smb.conf
 install -m755 source3/script/mksmbpasswd.sh $RPM_BUILD_ROOT%{_bindir}
diff --git a/packaging/RHEL/samba.spec.tmpl b/packaging/RHEL/samba.spec.tmpl
index adbc6dfb65..84392565f8 100644
--- a/packaging/RHEL/samba.spec.tmpl
+++ b/packaging/RHEL/samba.spec.tmpl
@@ -242,7 +242,7 @@ install -m644 setup/samba.sysconfig $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/samb
 install -m755 setup/smb.init $RPM_BUILD_ROOT%{initdir}/smb
 install -m755 setup/winbind.init $RPM_BUILD_ROOT%{initdir}/winbind
 install -m644 setup/samba.pamd $RPM_BUILD_ROOT%{_sysconfdir}/pam.d/samba
-install -m755 setup/smbprint $RPM_BUILD_ROOT%{_bindir}
+install -m755 packaging/printing/smbprint $RPM_BUILD_ROOT%{_bindir}
 install -m644 setup/smbusers $RPM_BUILD_ROOT%{_sysconfdir}/samba/smbusers
 install -m644 setup/smb.conf $RPM_BUILD_ROOT%{_sysconfdir}/samba/smb.conf
 install -m755 source3/script/mksmbpasswd.sh $RPM_BUILD_ROOT%{_bindir}
diff --git a/packaging/RHEL/setup/smbprint b/packaging/RHEL/setup/smbprint
deleted file mode 100644
index 1c3959d49b..0000000000
--- a/packaging/RHEL/setup/smbprint
+++ /dev/null
@@ -1,84 +0,0 @@
-#!/bin/sh
-# This script is an input filter for printcap printing on a unix machine. It
-# uses the smbclient program to print the file to the specified smb-based 
-# server and service.
-# For example you could have a printcap entry like this
-#
-# smb:lp=/dev/null:sd=/usr/spool/smb:sh:if=/usr/local/samba/smbprint
-#
-# which would create a unix printer called "smb" that will print via this 
-# script. You will need to create the spool directory /usr/spool/smb with
-# appropriate permissions and ownerships for your system.
-
-# Set these to the server and service you wish to print to 
-# In this example I have a WfWg PC called "lapland" that has a printer 
-# exported called "printer" with no password.
-
-#
-# Script further altered by hamiltom@ecnz.co.nz (Michael Hamilton)
-# so that the server, service, and password can be read from 
-# a /usr/var/spool/lpd/PRINTNAME/.config file.
-#
-# In order for this to work the /etc/printcap entry must include an 
-# accounting file (af=...):
-#
-#   cdcolour:\
-#	:cm=CD IBM Colorjet on 6th:\
-#	:sd=/var/spool/lpd/cdcolour:\
-#	:af=/var/spool/lpd/cdcolour/acct:\
-#	:if=/usr/local/etc/smbprint:\
-#	:mx=0:\
-#	:lp=/dev/null:
-#
-# The /usr/var/spool/lpd/PRINTNAME/.config file should contain:
-#   share=PC_SERVER
-#   user="user"
-#   password="password"
-#
-# Please, do not modify the order in the file.
-# Example:
-#   share=\\server\deskjet
-#   user="fred"
-#   password=""
-
-#
-# The last parameter to the filter is the accounting file name.
-#   Extract the directory name from the file name.
-#   Concat this with /.config to get the config file.
-#
-eval acct_file=\${$#}
-spool_dir=`dirname $acct_file` 
-config_file=$spool_dir/.config
-
-# Should read the following variables set in the config file:
-#   share
-#   hostip
-#   user
-#   password
-
-eval `cat $config_file`
-
-share=`echo $share | sed "s/[\]/\//g"`
-
-if [ "$user" != "" ]; then
-   usercmd="-U"
-else
-   usercmd=""
-fi
-
-if [ "$workgroup" != "" ]; then
-   workgroupcmd="-W"
-else
-   workgroupcmd=""
-fi
-
-if [ "$translate" = "yes" ]; then
- command="translate ; print -"
-else
- command="print -"
-fi
-#echo $share $password $translate $x_command > /tmp/smbprint.log
-
-cat | /usr/bin/smbclient "$share" "$password" -E ${hostip:+-I} \
-     $hostip -N -P $usercmd "$user" $workgroupcmd "$workgroup" \
-     -c "$command" 2>/dev/null
diff --git a/packaging/printing/README b/packaging/printing/README
new file mode 100644
index 0000000000..0dfcc3c699
--- /dev/null
+++ b/packaging/printing/README
@@ -0,0 +1,3 @@
+The smbprint script is an input filter for printcap printing on a unix machine.
+It uses the smbclient program to print the file to the specified smb-based
+server and service.
diff --git a/packaging/RHEL-CTDB/setup/smbprint b/packaging/printing/smbprint
index 1c3959d49b..a02d7543ac 100644
--- a/packaging/RHEL-CTDB/setup/smbprint
+++ b/packaging/printing/smbprint
@@ -1,25 +1,25 @@
 #!/bin/sh
 # This script is an input filter for printcap printing on a unix machine. It
-# uses the smbclient program to print the file to the specified smb-based 
+# uses the smbclient program to print the file to the specified smb-based
 # server and service.
 # For example you could have a printcap entry like this
 #
 # smb:lp=/dev/null:sd=/usr/spool/smb:sh:if=/usr/local/samba/smbprint
 #
-# which would create a unix printer called "smb" that will print via this 
+# which would create a unix printer called "smb" that will print via this
 # script. You will need to create the spool directory /usr/spool/smb with
 # appropriate permissions and ownerships for your system.
 
-# Set these to the server and service you wish to print to 
-# In this example I have a WfWg PC called "lapland" that has a printer 
+# Set these to the server and service you wish to print to
+# In this example I have a WfWg PC called "lapland" that has a printer
 # exported called "printer" with no password.
 
 #
 # Script further altered by hamiltom@ecnz.co.nz (Michael Hamilton)
-# so that the server, service, and password can be read from 
+# so that the server, service, and password can be read from
 # a /usr/var/spool/lpd/PRINTNAME/.config file.
 #
-# In order for this to work the /etc/printcap entry must include an 
+# In order for this to work the /etc/printcap entry must include an
 # accounting file (af=...):
 #
 #   cdcolour:\
@@ -47,7 +47,7 @@
 #   Concat this with /.config to get the config file.
 #
 eval acct_file=\${$#}
-spool_dir=`dirname $acct_file` 
+spool_dir=`dirname $acct_file`
 config_file=$spool_dir/.config
 
 # Should read the following variables set in the config file: