diff options
Diffstat (limited to 'source3/compiler.m4')
| -rw-r--r-- | source3/compiler.m4 | 990 |
1 files changed, 0 insertions, 990 deletions
diff --git a/source3/compiler.m4 b/source3/compiler.m4 deleted file mode 100644 index 32f87cbc78..0000000000 --- a/source3/compiler.m4 +++ /dev/null @@ -1,990 +0,0 @@ -dnl @synopsis AX_CFLAGS_GCC_OPTION (optionflag [,[shellvar][,[A][,[NA]]]) -dnl -dnl AX_CFLAGS_GCC_OPTION(-fvomit-frame) would show a message as like -dnl "checking CFLAGS for gcc -fvomit-frame ... yes" and adds -dnl the optionflag to CFLAGS if it is understood. You can override -dnl the shellvar-default of CFLAGS of course. The order of arguments -dnl stems from the explicit macros like AX_CFLAGS_WARN_ALL. -dnl -dnl The cousin AX_CXXFLAGS_GCC_OPTION would check for an option to add -dnl to CXXFLAGS - and it uses the autoconf setup for C++ instead of C -dnl (since it is possible to use different compilers for C and C++). -dnl -dnl The macro is a lot simpler than any special AX_CFLAGS_* macro (or -dnl ac_cxx_rtti.m4 macro) but allows to check for arbitrary options. -dnl However, if you use this macro in a few places, it would be great -dnl if you would make up a new function-macro and submit it to the -dnl ac-archive. -dnl -dnl - $1 option-to-check-for : required ("-option" as non-value) -dnl - $2 shell-variable-to-add-to : CFLAGS (or CXXFLAGS in the other case) -dnl - $3 action-if-found : add value to shellvariable -dnl - $4 action-if-not-found : nothing -dnl -dnl note: in earlier versions, $1-$2 were swapped. We try to detect the -dnl situation and accept a $2=~/-/ as being the old option-to-check-for. -dnl -dnl also: there are other variants that emerged from the original macro -dnl variant which did just test an option to be possibly added. However, -dnl some compilers accept an option silently, or possibly for just -dnl another option that was not intended. Therefore, we have to do a -dnl generic test for a compiler family. For gcc we check "-pedantic" -dnl being accepted which is also understood by compilers who just want -dnl to be compatible with gcc even when not being made from gcc sources. -dnl -dnl see also: -dnl AX_CFLAGS_SUN_OPTION AX_CFLAGS_HPUX_OPTION -dnl AX_CFLAGS_AIX_OPTION AX_CFLAGS_IRIX_OPTION -dnl -dnl @, tested, experimental -dnl @version $Id: ax_cflags_gcc_option.m4,v 1.5 2003/11/29 08:13:25 guidod Exp $ -dnl @author Guido Draheim <guidod@gmx.de> -dnl http://ac-archive.sourceforge.net/C_Support/ax_cflags_gcc_option.html -dnl -AC_DEFUN([AX_CFLAGS_GCC_OPTION_OLD], [dnl -AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_gcc_option_$2])dnl -AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for gcc m4_ifval($2,$2,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_C - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "-pedantic % m4_ifval($2,$2,-option)" dnl GCC - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"]) - m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - - -dnl the only difference - the LANG selection... and the default FLAGS - -AC_DEFUN([AX_CXXFLAGS_GCC_OPTION_OLD], [dnl -AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_gcc_option_$2])dnl -AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for gcc m4_ifval($2,$2,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_CXX - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "-pedantic % m4_ifval($2,$2,-option)" dnl GCC - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"]) - m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -dnl ------------------------------------------------------------------------- - -AC_DEFUN([AX_CFLAGS_GCC_OPTION_NEW], [dnl -AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_gcc_option_$1])dnl -AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for gcc m4_ifval($1,$1,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_C - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "-pedantic % m4_ifval($1,$1,-option)" dnl GCC - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"]) - m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - - -dnl the only difference - the LANG selection... and the default FLAGS - -AC_DEFUN([AX_CXXFLAGS_GCC_OPTION_NEW], [dnl -AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_gcc_option_$1])dnl -AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for gcc m4_ifval($1,$1,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_CXX - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "-pedantic % m4_ifval($1,$1,-option)" dnl GCC - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"]) - m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -AC_DEFUN([AX_CFLAGS_GCC_OPTION],[ifelse(m4_bregexp([$2],[-]),-1, -[AX_CFLAGS_GCC_OPTION_NEW($@)],[AX_CFLAGS_GCC_OPTION_OLD($@)])]) - -AC_DEFUN([AX_CXXFLAGS_GCC_OPTION],[ifelse(m4_bregexp([$2],[-]),-1, -[AX_CXXFLAGS_GCC_OPTION_NEW($@)],[AX_CXXFLAGS_GCC_OPTION_OLD($@)])]) - - -dnl @synopsis AX_CFLAGS_AIX_OPTION (optionflag [,[shellvar][,[A][,[NA]]]) -dnl -dnl AX_CFLAGS_AIX_OPTION(-qubicle) would show a message as like -dnl "checking CFLAGS for aix/cc -qubicle ... yes" and adds -dnl the optionflag to CFLAGS if it is understood. You can override -dnl the shellvar-default of CFLAGS of course. The order of arguments -dnl stems from the explicit macros like AX_CFLAGS_WARN_ALL. -dnl -dnl The cousin AX_CXXFLAGS_AIX_OPTION would check for an option to add -dnl to CXXFLAGS - and it uses the autoconf setup for C++ instead of C -dnl (since it is possible to use different compilers for C and C++). -dnl -dnl The macro is a lot simpler than any special AX_CFLAGS_* macro (or -dnl ac_cxx_rtti.m4 macro) but allows to check for arbitrary options. -dnl However, if you use this macro in a few places, it would be great -dnl if you would make up a new function-macro and submit it to the -dnl ac-archive. -dnl - $1 option-to-check-for : required ("-option" as non-value) -dnl - $2 shell-variable-to-add-to : CFLAGS (or CXXFLAGS in the other case) -dnl - $3 action-if-found : add value to shellvariable -dnl - $4 action-if-not-found : nothing -dnl -dnl note: in earlier versions, $1-$2 were swapped. We try to detect the -dnl situation and accept a $2=~/-/ as being the old option-to-check-for. -dnl -dnl see also: AX_CFLAGS_GCC_OPTION for the widely used original variant. -dnl -dnl @, untested, experimental -dnl @version $Id: ax_cflags_aix_option.m4,v 1.1 2003/10/13 22:20:39 guidod Exp $ -dnl @author Guido Draheim <guidod@gmx.de> -dnl http://ac-archive.sourceforge.net/guidod/ax_cflags_aix_option.m4 -dnl -AC_DEFUN([AX_CFLAGS_AIX_OPTION_OLD], [dnl -AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_aix_option_$2])dnl -AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for aix/cc m4_ifval($2,$2,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_C - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "-qlanglvl=ansi -qsrcmsg % m4_ifval($2,$2,-option)" dnl AIX - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"]) - m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -dnl the only difference - the LANG selection... and the default FLAGS - -AC_DEFUN([AX_CXXFLAGS_AIX_OPTION_OLD], [dnl -AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_aix_option_$2])dnl -AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for aix/cc m4_ifval($2,$2,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_CXX - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "-qlanglvl=ansi -qsrcmsg % m4_ifval($2,$2,-option)" dnl AIX - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"]) - m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -dnl ------------------------------------------------------------------------ - -AC_DEFUN([AX_CFLAGS_AIX_OPTION_NEW], [dnl -AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_aix_option_$1])dnl -AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for aix/cc m4_ifval($1,$1,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_C - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "-qlanglvl=ansi -qsrcmsg % m4_ifval($1,$1,-option)" dnl AIX - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"]) - m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -dnl the only difference - the LANG selection... and the default FLAGS - -AC_DEFUN([AX_CXXFLAGS_AIX_OPTION_NEW], [dnl -AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_aix_option_$1])dnl -AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for aix/cc m4_ifval($1,$1,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_CXX - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "-qlanglvl=ansi -qsrcmsg % m4_ifval($1,$1,-option)" dnl AIX - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"]) - m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -AC_DEFUN([AX_CFLAGS_AIX_OPTION],[ifelse(m4_bregexp([$2],[-]),-1, -[AX_CFLAGS_AIX_OPTION_NEW($@)],[AX_CFLAGS_AIX_OPTION_OLD($@)])]) - -AC_DEFUN([AX_CXXFLAGS_AIX_OPTION],[ifelse(m4_bregexp([$2],[-]),-1, -[AX_CXXFLAGS_AIX_OPTION_NEW($@)],[AX_CXXFLAGS_AIX_OPTION_OLD($@)])]) - -dnl @synopsis AX_CFLAGS_HPUX_OPTION (optionflag [,[shellvar][,[A][,[NA]]]) -dnl -dnl AX_CFLAGS_HPUX_OPTION(-Afresh) would show a message as like -dnl "checking CFLAGS for hpux/cc -Afresh ... yes" and adds -dnl the optionflag to CFLAGS if it is understood. You can override -dnl the shellvar-default of CFLAGS of course. The order of arguments -dnl stems from the explicit macros like AX_CFLAGS_WARN_ALL. -dnl -dnl The cousin AX_CXXFLAGS_HPUX_OPTION would check for an option to add -dnl to CXXFLAGS - and it uses the autoconf setup for C++ instead of C -dnl (since it is possible to use different compilers for C and C++). -dnl -dnl The macro is a lot simpler than any special AX_CFLAGS_* macro (or -dnl ac_cxx_rtti.m4 macro) but allows to check for arbitrary options. -dnl However, if you use this macro in a few places, it would be great -dnl if you would make up a new function-macro and submit it to the -dnl ac-archive. -dnl - $1 option-to-check-for : required ("-option" as non-value) -dnl - $2 shell-variable-to-add-to : CFLAGS (or CXXFLAGS in the other case) -dnl - $3 action-if-found : add value to shellvariable -dnl - $4 action-if-not-found : nothing -dnl -dnl note: in earlier versions, $1-$2 were swapped. We try to detect the -dnl situation and accept a $2=~/-/ as being the old option-to-check-for. -dnl -dnl see also: AX_CFLAGS_GCC_OPTION for the widely used original variant. -dnl -dnl @, untested, experimental -dnl @version $Id: ax_cflags_hpux_option.m4,v 1.1 2003/10/13 22:20:39 guidod Exp $ -dnl @author Guido Draheim <guidod@gmx.de> -dnl http://ac-archive.sourceforge.net/guidod/ax_cflags_hpux_option.m4 -AC_DEFUN([AX_CFLAGS_HPUX_OPTION_OLD], [dnl -AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_hpux_option_$2])dnl -AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for hpux/cc m4_ifval($2,$2,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_C - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "+ESlit +w1 -Aa % m4_ifval($2,$2,-option)" dnl HP-UX C - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"]) - m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -dnl the only difference - the LANG selection... and the default FLAGS - -AC_DEFUN([AX_CXXFLAGS_HPUX_OPTION_OLD], [dnl -AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_hpux_option_$2])dnl -AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for hpux/cc m4_ifval($2,$2,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_CXX - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "+ESlit +w1 -Aa % m4_ifval($2,$2,-option)" dnl HP-UX C - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"]) - m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -dnl ------------------------------------------------------------------------ - -AC_DEFUN([AX_CFLAGS_HPUX_OPTION_NEW], [dnl -AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_hpux_option_$1])dnl -AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for hpux/cc m4_ifval($1,$1,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_C - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "+ESlit +w1 -Aa % m4_ifval($1,$1,-option)" dnl HP-UX C - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"]) - m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -dnl the only difference - the LANG selection... and the default FLAGS - -AC_DEFUN([AX_CXXFLAGS_HPUX_OPTION_NEW], [dnl -AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_hpux_option_$1])dnl -AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for hpux/cc m4_ifval($1,$1,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_CXX - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "+ESlit +w1 -Aa % m4_ifval($1,$1,-option)" dnl HP-UX C - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"]) - m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -AC_DEFUN([AX_CFLAGS_HPUX_OPTION],[ifelse(m4_bregexp([$2],[-]),-1, -[AX_CFLAGS_HPUX_OPTION_NEW($@)],[AX_CFLAGS_HPUX_OPTION_OLD($@)])]) - -AC_DEFUN([AX_CXXFLAGS_HPUX_OPTION],[ifelse(m4_bregexp([$2],[-]),-1, -[AX_CXXFLAGS_HPUX_OPTION_NEW($@)],[AX_CXXFLAGS_HPUX_OPTION_OLD($@)])]) - - -dnl @synopsis AX_CFLAGS_IRIX_OPTION (optionflag [,[shellvar][,[A][,[NA]]]) -dnl -dnl AX_CFLAGS_IRIX_OPTION(-go_for_it) would show a message as like -dnl "checking CFLAGS for irix/cc -go_for_it ... yes" and adds -dnl the optionflag to CFLAGS if it is understood. You can override -dnl the shellvar-default of CFLAGS of course. The order of arguments -dnl stems from the explicit macros like AX_CFLAGS_WARN_ALL. -dnl -dnl The cousin AX_CXXFLAGS_IRIX_OPTION would check for an option to add -dnl to CXXFLAGS - and it uses the autoconf setup for C++ instead of C -dnl (since it is possible to use different compilers for C and C++). -dnl -dnl The macro is a lot simpler than any special AX_CFLAGS_* macro (or -dnl ac_cxx_rtti.m4 macro) but allows to check for arbitrary options. -dnl However, if you use this macro in a few places, it would be great -dnl if you would make up a new function-macro and submit it to the -dnl ac-archive. -dnl - $1 option-to-check-for : required ("-option" as non-value) -dnl - $2 shell-variable-to-add-to : CFLAGS (or CXXFLAGS in the other case) -dnl - $3 action-if-found : add value to shellvariable -dnl - $4 action-if-not-found : nothing -dnl -dnl note: in earlier versions, $1-$2 were swapped. We try to detect the -dnl situation and accept a $2=~/-/ as being the old option-to-check-for. -dnl -dnl see also: AX_CFLAGS_GCC_OPTION for the widely used original variant. -dnl -dnl @, untested, experimental -dnl @version $Id: ax_cflags_irix_option.m4,v 1.1 2003/10/13 22:20:39 guidod Exp $ -dnl @author Guido Draheim <guidod@gmx.de> -dnl http://ac-archive.sourceforge.net/guidod/ax_cflags_irix_option.m4 -AC_DEFUN([AX_CFLAGS_IRIX_OPTION_OLD], [dnl -AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_irix_option_$2])dnl -AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for irix/cc m4_ifval($2,$2,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_C - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "-fullwarn -use_readonly_const % m4_ifval($2,$2,-option)" dnl IRIX C - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"]) - m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -dnl the only difference - the LANG selection... and the default FLAGS - -AC_DEFUN([AX_CXXFLAGS_IRIX_OPTION_OLD], [dnl -AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_irix_option_$2])dnl -AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for irix/cc m4_ifval($2,$2,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_CXX - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "-fullwarn -use_readonly_const % m4_ifval($2,$2,-option)" dnl IRIX C - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"]) - m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -dnl -------------------------------------------------------------------------- - -AC_DEFUN([AX_CFLAGS_IRIX_OPTION_NEW], [dnl -AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_irix_option_$1])dnl -AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for irix/cc m4_ifval($1,$1,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_C - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "-fullwarn -use_readonly_const % m4_ifval($1,$1,-option)" dnl IRIX C - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"]) - m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -dnl the only difference - the LANG selection... and the default FLAGS - -AC_DEFUN([AX_CXXFLAGS_IRIX_OPTION_NEW], [dnl -AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_irix_option_$1])dnl -AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for irix/cc m4_ifval($1,$1,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_CXX - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "-fullwarn -use_readonly_const % m4_ifval($1,$1,-option)" dnl IRIX C - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"]) - m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -AC_DEFUN([AX_CFLAGS_IRIX_OPTION],[ifelse(m4_bregexp([$2],[-]),-1, -[AX_CFLAGS_IRIX_OPTION_NEW($@)],[AX_CFLAGS_IRIX_OPTION_OLD($@)])]) - -AC_DEFUN([AX_CXXFLAGS_IRIX_OPTION],[ifelse(m4_bregexp([$2],[-]),-1, -[AX_CXXFLAGS_IRIX_OPTION_NEW($@)],[AX_CXXFLAGS_IRIX_OPTION_OLD($@)])]) - - -dnl @synopsis AX_CFLAGS_SUN_OPTION (optionflag [,[shellvar][,[A][,[NA]]]) -dnl -dnl AX_CFLAGS_SUN_OPTION(+xtreme) would show a message as like -dnl "checking CFLAGS for sun/cc +xtreme ... yes" and adds -dnl the optionflag to CFLAGS if it is understood. You can override -dnl the shellvar-default of CFLAGS of course. The order of arguments -dnl stems from the explicit macros like AX_CFLAGS_WARN_ALL. -dnl -dnl The cousin AX_CXXFLAGS_SUN_OPTION would check for an option to add -dnl to CXXFLAGS - and it uses the autoconf setup for C++ instead of C -dnl (since it is possible to use different compilers for C and C++). -dnl -dnl The macro is a lot simpler than any special AX_CFLAGS_* macro (or -dnl ac_cxx_rtti.m4 macro) but allows to check for arbitrary options. -dnl However, if you use this macro in a few places, it would be great -dnl if you would make up a new function-macro and submit it to the -dnl ac-archive. -dnl - $1 option-to-check-for : required ("-option" as non-value) -dnl - $2 shell-variable-to-add-to : CFLAGS (or CXXFLAGS in the other case) -dnl - $3 action-if-found : add value to shellvariable -dnl - $4 action-if-not-found : nothing -dnl -dnl note: in earlier versions, $1-$2 were swapped. We try to detect the -dnl situation and accept a $2=~/-/ as being the old option-to-check-for. -dnl -dnl see also: AX_CFLAGS_GCC_OPTION for the widely used original variant. -dnl -dnl @, untested, experimental -dnl @version $Id: ax_cflags_sun_option.m4,v 1.1 2003/10/13 22:20:39 guidod Exp $ -dnl @author Guido Draheim <guidod@gmx.de> -dnl http://ac-archive.sourceforge.net/guidod/ax_cflags_sun_option.m4 -AC_DEFUN([AX_CFLAGS_SUN_OPTION_OLD], [dnl -AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_sun_option_$2])dnl -AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for sun/cc m4_ifval($2,$2,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_C - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "+xstrconst -Xc % m4_ifval($2,$2,-option)" dnl Solaris C - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"]) - m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -dnl the only difference - the LANG selection... and the default FLAGS - -AC_DEFUN([AX_CXXFLAGS_SUN_OPTION_OLD], [dnl -AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_sun_option_$2])dnl -AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for sun/cc m4_ifval($2,$2,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_CXX - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "+xstrconst -Xc % m4_ifval($2,$2,-option)" dnl Solaris C - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"]) - m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -dnl ----------------------------------------------------------------------- - -AC_DEFUN([AX_CFLAGS_SUN_OPTION_NEW], [dnl -AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_sun_option_$1])dnl -AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for sun/cc m4_ifval($1,$1,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_C - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "+xstrconst -Xc % m4_ifval($1,$1,-option)" dnl Solaris C - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"]) - m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -dnl the only difference - the LANG selection... and the default FLAGS - -AC_DEFUN([AX_CXXFLAGS_SUN_OPTION_NEW], [dnl -AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_sun_option_$1])dnl -AC_CACHE_CHECK([m4_ifval($2,$2,FLAGS) for sun/cc m4_ifval($1,$1,-option)], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_CXX - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "+xstrconst -Xc % m4_ifval($1,$1,-option)" dnl Solaris C - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($2,$2,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($2,$2,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR"]) - m4_ifval($2,$2,FLAGS)="$m4_ifval($2,$2,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -AC_DEFUN([AX_CFLAGS_SUN_OPTION],[ifelse(m4_bregexp([$2],[-]),-1, -[AX_CFLAGS_SUN_OPTION_NEW($@)],[AX_CFLAGS_SUN_OPTION_OLD($@)])]) - -AC_DEFUN([AX_CXXFLAGS_SUN_OPTION],[ifelse(m4_bregexp([$2],[-]),-1, -[AX_CXXFLAGS_SUN_OPTION_NEW($@)],[AX_CXXFLAGS_SUN_OPTION_OLD($@)])]) - - -dnl @synopsis AX_CFLAGS_WARN_ALL [(shellvar [,default, [A/NA]])] -dnl -dnl Try to find a compiler option that enables most reasonable warnings. -dnl This macro is directly derived from VL_PROG_CC_WARNINGS which is -dnl split up into two AX_CFLAGS_WARN_ALL and AX_CFLAGS_WARN_ALL_ANSI -dnl -dnl For the GNU CC compiler it will be -Wall (and -ansi -pedantic) -dnl The result is added to the shellvar being CFLAGS by default. -dnl -dnl Currently this macro knows about GCC, Solaris C compiler, -dnl Digital Unix C compiler, C for AIX Compiler, HP-UX C compiler, -dnl IRIX C compiler, NEC SX-5 (Super-UX 10) C compiler, and Cray J90 -dnl (Unicos 10.0.0.8) C compiler. -dnl -dnl - $1 shell-variable-to-add-to : CFLAGS -dnl - $2 add-value-if-not-found : nothing -dnl - $3 action-if-found : add value to shellvariable -dnl - $4 action-if-not-found : nothing -dnl -dnl @version $Id: ax_cflags_warn_all.m4,v 1.2 2003/10/12 14:56:07 guidod Exp $ -dnl @author Guido Draheim <guidod@gmx.de> -dnl http://ac-archive.sourceforge.net/guidod/ax_cflags_warn_all.m4 -AC_DEFUN([AX_CFLAGS_WARN_ALL],[dnl -AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_warn_all])dnl -AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for maximum warnings], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_C - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "-pedantic % -Wall" dnl GCC - "-xstrconst % -v" dnl Solaris C - "-std1 % -verbose -w0 -warnprotos" dnl Digital Unix - "-qlanglvl=ansi % -qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd" dnl AIX - "-ansi -ansiE % -fullwarn" dnl IRIX - "+ESlit % +w1" dnl HP-UX C - "-Xc % -pvctl[,]fullmsg" dnl NEC SX-5 (Super-UX 10) - "-h conform % -h msglevel 2" dnl Cray C (Unicos) - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4,[m4_ifval($2,[ - AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"]) - m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"])]) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"]) - m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -dnl the only difference - the LANG selection... and the default FLAGS - -AC_DEFUN([AX_CXXFLAGS_WARN_ALL],[dnl -AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl -AS_VAR_PUSHDEF([VAR],[ac_cv_cxxflags_warn_all])dnl -AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for maximum warnings], -VAR,[VAR="no, unknown" - AC_LANG_SAVE - AC_LANG_CXX - ac_save_[]FLAGS="$[]FLAGS" -for ac_arg dnl -in "-pedantic % -Wall" dnl GCC - "-xstrconst % -v" dnl Solaris C - "-std1 % -verbose -w0 -warnprotos" dnl Digital Unix - "-qlanglvl=ansi % -qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd" dnl AIX - "-ansi -ansiE % -fullwarn" dnl IRIX - "+ESlit % +w1" dnl HP-UX C - "-Xc % -pvctl[,]fullmsg" dnl NEC SX-5 (Super-UX 10) - "-h conform % -h msglevel 2" dnl Cray C (Unicos) - # -do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'` - AC_TRY_COMPILE([],[return 0;], - [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break]) -done - FLAGS="$ac_save_[]FLAGS" - AC_LANG_RESTORE -]) -case ".$VAR" in - .ok|.ok,*) m4_ifvaln($3,$3) ;; - .|.no|.no,*) m4_ifvaln($4,$4,[m4_ifval($2,[ - AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"]) - m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"])]) ;; - *) m4_ifvaln($3,$3,[ - if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null - then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR]) - else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"]) - m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR" - fi ]) ;; -esac -AS_VAR_POPDEF([VAR])dnl -AS_VAR_POPDEF([FLAGS])dnl -]) - -dnl implementation tactics: -dnl the for-argument contains a list of options. The first part of -dnl these does only exist to detect the compiler - usually it is -dnl a global option to enable -ansi or -extrawarnings. All other -dnl compilers will fail about it. That was needed since a lot of -dnl compilers will give false positives for some option-syntax -dnl like -Woption or -Xoption as they think of it is a pass-through -dnl to later compile stages or something. The "%" is used as a -dnl delimimiter. A non-option comment can be given after "%%" marks. - |