diff options
Diffstat (limited to 'source3')
| -rw-r--r-- | source3/Makefile.in | 6 | ||||
| -rw-r--r-- | source3/script/tests/functions | 82 | ||||
| -rw-r--r-- | source3/script/tests/runtests.sh | 129 | ||||
| -rwxr-xr-x | source3/script/tests/selftest.sh | 194 | ||||
| -rw-r--r-- | source3/script/tests/t_001.sh | 30 | ||||
| -rw-r--r-- | source3/script/tests/t_002.sh | 30 | ||||
| -rw-r--r-- | source3/script/tests/test_functions.sh | 221 | ||||
| -rwxr-xr-x | source3/script/tests/test_posix_s3.sh | 52 | ||||
| -rwxr-xr-x | source3/script/tests/tests_all.sh | 8 |
9 files changed, 478 insertions, 274 deletions
diff --git a/source3/Makefile.in b/source3/Makefile.in index edf9548d5e..40d59e7cec 100644 --- a/source3/Makefile.in +++ b/source3/Makefile.in @@ -846,9 +846,9 @@ pch: proto_exists ## ## Targets for 'make test' ## -test: all torture - @echo Running Samba 3 Test suite - @sh ./script/tests/runtests.sh t_dir +test: all torture bin/timelimit + @echo Running Test suite + @sh ./script/tests/selftest.sh ${selftest_prefix}/st all "${smbtorture4_path}" # Check for PAM module problems. Specifically, check that every module we # built can actually be loaded by a minimal PAM-aware application. diff --git a/source3/script/tests/functions b/source3/script/tests/functions deleted file mode 100644 index 8cb8f0b155..0000000000 --- a/source3/script/tests/functions +++ /dev/null @@ -1,82 +0,0 @@ -## -## library file for test functions -## - -## -## start/stop smbd daemon -## -check_smbd_running() -{ - ## the smbcontrol ping will return a 0 on success - smbcontrol $CONFIGURATION smbd ping 2>&1 > /dev/null -} - -start_smbd() -{ - echo "Starting smbd...." - - smbd $CONFIGURATION || return $? - - sleep 1 - - smbcontrol $CONFIGURATION `cat $PIDDIR/smbd.pid` ping 2>&1 > /dev/null || return $? -} - -stop_smbd() -{ - smbd_pid=`cat $PIDDIR/smbd.pid` - echo "Shutting down smbd (pid $smbd_pid)..." - - ## belt and braces; first kill and then send a shutdown message - - kill -TERM $smbd_pid - smbcontrol $CONFIGURATION smbd shutdown - - ## check to see if smbd is already running - check_smbd_running - if test $? = 0; then - echo "Unable to stop smbd!" - exit 2 - fi -} - - -## -## start/stop smbd daemon -## -check_nmbd_running() -{ - ## the smbcontrol ping will return a 0 on success - smbcontrol $CONFIGURATION nmbd ping 2>&1 > /dev/null -} - -start_nmbd() -{ - echo "Starting nmbd...." - - nmbd $CONFIGURATION || return $? - - sleep 1 - - # smbcontrol $CONFIGURATION `cat $PIDDIR/nmbd.pid` ping 2>&1 > /dev/null || return $? - kill -0 `cat $PIDDIR/nmbd.pid` -} - -stop_nmbd() -{ - nmbd_pid=`cat $PIDDIR/nmbd.pid` - echo "Shutting down nmbd (pid $nmbd_pid)..." - - ## belt and braces; first kill and then send a shutdown message - - kill -TERM $nmbd_pid 2> /dev/null - sleep 1 - - ## check to see if smbd is already running - kill -0 $nmbd_pid 2> /dev/null - if test $? = 0; then - echo "Unable to stop nmbd!" - exit 2 - fi -} - diff --git a/source3/script/tests/runtests.sh b/source3/script/tests/runtests.sh deleted file mode 100644 index ddaf94e8ac..0000000000 --- a/source3/script/tests/runtests.sh +++ /dev/null @@ -1,129 +0,0 @@ -#!/bin/sh - -if [ "x$1" = "x" ]; then - echo "$0 <directory>" - exit 1 -fi - -if [ $# = 2 ]; then - testnum=$2 -fi - -## -## create the test directory -## -PREFIX=`echo $1 | sed s+//+/+` -mkdir -p $PREFIX || exit $? -OLD_PWD=`pwd` -cd $PREFIX || exit $? -export PREFIX_ABS=`pwd` -cd $OLD_PWD - -## -## setup the various environment variables we need -## - -USERNAME=`whoami` -PASSWORD=test - -SRCDIR=`pwd` -SCRIPTDIR=$SRCDIR/script/tests -SHRDIR=$PREFIX_ABS/tmp -LIBDIR=$PREFIX_ABS/lib -PIDDIR=$PREFIX_ABS/pid -CONFFILE=$LIBDIR/smb.conf -PRIVATEDIR=$PREFIX_ABS/private -LOCKDIR=$PREFIX_ABS/lockdir -LOGDIR=$PREFIX_ABS/logs -SOCKET_WRAPPER_DIR=$PREFIX_ABS/sockwrap -CONFIGURATION="-s $CONFFILE" -PATH=`pwd`/bin:$PATH - -export PREFIX_ABS CONFIGURATION CONFFILE PATH SOCKET_WRAPPER_DIR DOMAIN -export PRIVATEDIR LIBDIR PIDDIR LOCKDIR LOGDIR -export SRCDIR SCRIPTDIR -export USERNAME PASSWORD - - -## -## verify that we were built with --enable-socket-wrapper -## - -if test "x`smbd -b | grep SOCKET_WRAPPER`" = "x"; then - echo "***" - echo "*** You must include --enable-socket-wrapper when compiling Samba" - echo "*** in order to execute 'make test'. Exiting...." - echo "***" - exit 1 -fi - -## -## create the test directory layout -## - -/bin/rm -rf $PREFIX/* -mkdir -p $PRIVATEDIR $LIBDIR $PIDDIR $LOCKDIR $LOGDIR $SOCKET_WRAPPER_DIR - -## -## Create the common config include file with the basic settings -## - -cat >$LIBDIR/common.conf<<EOF - netbios name = LOCALHOST - workgroup = SAMBA-TEST - - private dir = $PRIVATEDIR - pid directory = $PIDDIR - lock directory = $LOCKDIR - log file = $LOGDIR/log.%m - log level = 0 - - passdb backend = tdbsam - - interfaces = lo - bind interfaces only = yes - - panic action = $SCRIPTDIR/gdb_backtrace %d -EOF - -cat >$LIBDIR/smb.conf<<EOF -[global] - include = $LIBDIR/common.conf -EOF - - -## -## create a test account -## - -(echo $PASSWORD; echo $PASSWORD) | smbpasswd -c $LIBDIR/smb.conf -L -s -a $USERNAME - - -## -## ready to go...now loop through the tests -## - -if [ -f $SCRIPTDIR/t_$testnum.sh ]; then - testfile=$SCRIPTDIR/t_$testnum.sh - echo ">>>>>> Starting test driver `basename $testfile` <<<<<" - sh $testfile - if [ $? = 0 ]; then - echo ">>>>> test ok <<<<<" - else - echo ">>>>> test failed <<<<<" - fi - - exit 0 -fi - -for testfile in `ls $SCRIPTDIR/t_*sh | sort`; do - echo " " - echo ">>>>>> Starting test driver `basename $testfile` <<<<<" - sh $testfile - if [ $? = 0 ]; then - echo ">>>>> test ok <<<<<" - else - echo ">>>>> test failed <<<<<" - fi -done - diff --git a/source3/script/tests/selftest.sh b/source3/script/tests/selftest.sh new file mode 100755 index 0000000000..caaf1e1df1 --- /dev/null +++ b/source3/script/tests/selftest.sh @@ -0,0 +1,194 @@ +#!/bin/sh + +if [ $# != 3 ]; then + echo "$0 <directory> <all | quick> <smbtorture4>" + exit 1 +fi + +SMBTORTURE4=$3 +TESTS=$2 + +## +## create the test directory +## +PREFIX=`echo $1 | sed s+//+/+` +mkdir -p $PREFIX || exit $? +OLD_PWD=`pwd` +cd $PREFIX || exit $? +export PREFIX_ABS=`pwd` +cd $OLD_PWD + +if [ -z "$TORTURE_MAXTIME" ]; then + TORTURE_MAXTIME=300 +fi + +## +## setup the various environment variables we need +## + +SERVER=localhost +USERNAME=`whoami` +PASSWORD=test + +SRCDIR=`pwd` +SCRIPTDIR=$SRCDIR/script/tests +SHRDIR=$PREFIX_ABS/tmp +LIBDIR=$PREFIX_ABS/lib +PIDDIR=$PREFIX_ABS/pid +CONFFILE=$LIBDIR/smb.conf +COMMONCONFFILE=$LIBDIR/common.conf +PRIVATEDIR=$PREFIX_ABS/private +LOCKDIR=$PREFIX_ABS/lockdir +LOGDIR=$PREFIX_ABS/logs +SOCKET_WRAPPER_DIR=$PREFIX/sw +CONFIGURATION="-s $CONFFILE" + +export PREFIX_ABS CONFIGURATION CONFFILE PATH SOCKET_WRAPPER_DIR DOMAIN +export PRIVATEDIR LIBDIR PIDDIR LOCKDIR LOGDIR +export SRCDIR SCRIPTDIR +export USERNAME PASSWORD +export SMBTORTURE4 + +PATH=bin:$PATH +export PATH + +## +## verify that we were built with --enable-socket-wrapper +## + +if test "x`smbd -b | grep SOCKET_WRAPPER`" = "x"; then + echo "***" + echo "*** You must include --enable-socket-wrapper when compiling Samba" + echo "*** in order to execute 'make test'. Exiting...." + echo "***" + exit 1 +fi + +## +## create the test directory layout +## +echo -n "CREATE TEST ENVIRONMENT IN '$PREFIX'"... +/bin/rm -rf $PREFIX/* +mkdir -p $PRIVATEDIR $LIBDIR $PIDDIR $LOCKDIR $LOGDIR $SOCKET_WRAPPER_DIR +mkdir -p $PREFIX_ABS/tmp +chmod 777 $PREFIX_ABS/tmp + +## +## Create the common config include file with the basic settings +## + +cat >$COMMONCONFFILE<<EOF + netbios name = LOCALHOST + workgroup = SAMBA-TEST + + private dir = $PRIVATEDIR + pid directory = $PIDDIR + lock directory = $LOCKDIR + log file = $LOGDIR/log.%m + log level = 0 + + passdb backend = tdbsam + + name resolve order = bcast + + interfaces = 127.0.0.1/8 + bind interfaces only = yes + + panic action = $SCRIPTDIR/gdb_backtrace %d +EOF + +cat >$CONFFILE<<EOF +[global] + include = $COMMONCONFFILE + +[tmp] + path = $PREFIX_ABS/tmp + read only = no +EOF + + +## +## create a test account +## + +(echo $PASSWORD; echo $PASSWORD) | \ + smbpasswd -c $CONFFILE -L -s -a $USERNAME >/dev/null || exit 1 + +echo "DONE"; + +if [ x"$RUN_FROM_BUILD_FARM" = x"yes" ];then + CONFIGURATION="$CONFIGURATION --option=\"torture:progress=no\"" +fi + +SERVER_TEST_FIFO="$PREFIX/server_test.fifo" +export SERVER_TEST_FIFO +NMBD_TEST_LOG="$PREFIX/nmbd_test.log" +export NMBD_TEST_LOG +SMBD_TEST_LOG="$PREFIX/smbd_test.log" +export SMBD_TEST_LOG + +# start off with 0 failures +failed=0 +export failed + +. $SCRIPTDIR/test_functions.sh + +SOCKET_WRAPPER_DEFAULT_IFACE=1 +export SOCKET_WRAPPER_DEFAULT_IFACE +samba3_check_or_start + +# ensure any one smbtorture call doesn't run too long +# and smbtorture will use 127.0.0.26 as source address by default +SOCKET_WRAPPER_DEFAULT_IFACE=26 +export SOCKET_WRAPPER_DEFAULT_IFACE +TORTURE4_INTERFACES='127.0.0.26/8,127.0.0.27/8,127.0.0.28/8,127.0.0.29/8,127.0.0.30/8,127.0.0.31/8' +TORTURE4_OPTIONS="--maximum-runtime=$TORTURE_MAXTIME --option=interfaces=$TORTURE4_INTERFACES $CONFIGURATION" +export TORTURE4_OPTIONS + +if [ x"$RUN_FROM_BUILD_FARM" = x"yes" ];then + TORTURE4_OPTIONS="$TORTURE4_OPTIONS --option=\"torture:progress=no\"" +fi + +## +## ready to go...now loop through the tests +## + +START=`date` +( + # give time for nbt server to register its names + echo delaying for nbt name registration + sleep 4 + # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init + bin/nmblookup $CONFIGURATION -U $SERVER $SERVER + bin/nmblookup $CONFIGURATION -U $SERVER $SERVER + bin/nmblookup $CONFIGURATION -U $SERVER $SERVER + + failed=0 + + . $SCRIPTDIR/tests_$TESTS.sh + exit $failed +) +failed=$? + +samba3_stop_sig_term + +END=`date` +echo "START: $START ($0)"; +echo "END: $END ($0)"; + +# if there were any valgrind failures, show them +count=`find $PREFIX -name 'valgrind.log*' | wc -l` +if [ "$count" != 0 ]; then + for f in $PREFIX/valgrind.log*; do + if [ -s $f ]; then + echo "VALGRIND FAILURE"; + failed=`expr $failed + 1` + cat $f + fi + done +fi + +sleep 2 +samba3_stop_sig_kill + +teststatus $0 $failed diff --git a/source3/script/tests/t_001.sh b/source3/script/tests/t_001.sh deleted file mode 100644 index 6d54d0e489..0000000000 --- a/source3/script/tests/t_001.sh +++ /dev/null @@ -1,30 +0,0 @@ -#!/bin/sh - -. $SCRIPTDIR/functions - -cat >$CONFFILE<<EOF -[global] - include = $LIBDIR/common.conf - smb ports = 139 - -[test] - path = $PREFIX_ABS/tmp - read only = no -EOF - -## -## Test code -## - -/bin/rm -rf $PREFIX_ABS/tmp -mkdir $PREFIX_ABS/tmp -chmod 1777 $PREFIX_ABS/tmp - -start_smbd || exit $? - -smbclient $CONFIGURATION -L localhost -N -p 139 -ret=$? - -stop_smbd - -exit $ret diff --git a/source3/script/tests/t_002.sh b/source3/script/tests/t_002.sh deleted file mode 100644 index 42070bed80..0000000000 --- a/source3/script/tests/t_002.sh +++ /dev/null @@ -1,30 +0,0 @@ -#!/bin/sh - -. $SCRIPTDIR/functions - -cat >$CONFFILE<<EOF -[global] - include = $LIBDIR/common.conf - -[test] - path = $PREFIX_ABS/tmp - read only = no -EOF - -## -## Test code -## - -/bin/rm -rf $PREFIX_ABS/tmp -mkdir $PREFIX_ABS/tmp -chmod 1777 $PREFIX_ABS/tmp - - -start_smbd || exit $? - -smbtorture //localhost/test -U${USERNAME}%${PASSWORD} FDPASS -ret=$? - -stop_smbd - -exit $ret diff --git a/source3/script/tests/test_functions.sh b/source3/script/tests/test_functions.sh new file mode 100644 index 0000000000..265385d0b1 --- /dev/null +++ b/source3/script/tests/test_functions.sh @@ -0,0 +1,221 @@ + +samba3_stop_sig_term() { + RET=0 + kill -USR1 `cat $PIDDIR/timelimit.nmbd.pid` >/dev/null 2>&1 || \ + kill -ALRM `cat $PIDDIR/timelimit.nmbd.pid` || RET=$? + + kill -USR1 `cat $PIDDIR/timelimit.smbd.pid` >/dev/null 2>&1 || \ + kill -ALRM `cat $PIDDIR/timelimit.smbd.pid` || RET=$? + + return $RET; +} + +samba3_stop_sig_kill() { + kill -ALRM `cat $PIDDIR/timelimit.nmbd.pid` >/dev/null 2>&1 + kill -ALRM `cat $PIDDIR/timelimit.smbd.pid` >/dev/null 2>&1 + return 0; +} + +samba3_check_or_start() { + if [ -n "$SERVER_TEST_FIFO" ];then + + trap samba3_stop_sig_kill SIGINT SIGQUIT + trap samba3_stop_sig_kill SIGTERM + + if [ -p "$SERVER_TEST_FIFO" ];then + return 0; + fi + + if [ -n "$SOCKET_WRAPPER_DIR" ];then + if [ -d "$SOCKET_WRAPPER_DIR" ]; then + rm -f $SOCKET_WRAPPER_DIR/* + else + mkdir -p $SOCKET_WRAPPER_DIR + fi + fi + + rm -f $SERVER_TEST_FIFO + mkfifo $SERVER_TEST_FIFO + + rm -f $NMBD_TEST_LOG + echo -n "STARTING NMBD..." + (( + if [ -z "$NMBD_MAXTIME" ]; then + NMBD_MAXTIME=2700 + fi + timelimit $NMBD_MAXTIME $SMBD_VALGRIND $SRCDIR/bin/nmbd -F -S --no-process-group -d1 -s $CONFFILE > $NMBD_TEST_LOG 2>&1 & + TIMELIMIT_NMBD_PID=$! + echo $TIMELIMIT_NMBD_PID > $PIDDIR/timelimit.nmbd.pid + wait $TIMELIMIT_NMBD_PID + ret=$?; + rm -f $SERVER_TEST_FIFO + if [ -n "$SOCKET_WRAPPER_DIR" -a -d "$SOCKET_WRAPPER_DIR" ]; then + rm -f $SOCKET_WRAPPER_DIR/* + fi + if [ x"$ret" = x"0" ];then + echo "nmbd exits with status $ret"; + echo "nmbd exits with status $ret" >>$NMBD_TEST_LOG; + elif [ x"$ret" = x"137" ];then + echo "nmbd got SIGXCPU and exits with status $ret!" + echo "nmbd got SIGXCPU and exits with status $ret!">>$NMBD_TEST_LOG; + else + echo "nmbd failed with status $ret!" + echo "nmbd failed with status $ret!">>$NMBD_TEST_LOG; + fi + exit $ret; + ) || exit $? &) 2>/dev/null || exit $? + echo "DONE" + + rm -f $SMBD_TEST_LOG + echo -n "STARTING SMBD..." + (( + if [ -z "$SMBD_MAXTIME" ]; then + SMBD_MAXTIME=2700 + fi + timelimit $SMBD_MAXTIME $SMBD_VALGRIND $SRCDIR/bin/smbd -F -S --no-process-group -d1 -s $CONFFILE > $SMBD_TEST_LOG 2>&1 & + TIMELIMIT_SMBD_PID=$! + echo $TIMELIMIT_SMBD_PID > $PIDDIR/timelimit.smbd.pid + wait $TIMELIMIT_SMBD_PID + ret=$?; + rm -f $SERVER_TEST_FIFO + if [ -n "$SOCKET_WRAPPER_DIR" -a -d "$SOCKET_WRAPPER_DIR" ]; then + rm -f $SOCKET_WRAPPER_DIR/* + fi + if [ x"$ret" = x"0" ];then + echo "smbd exits with status $ret"; + echo "smbd exits with status $ret" >>$SMBD_TEST_LOG; + elif [ x"$ret" = x"137" ];then + echo "smbd got SIGXCPU and exits with status $ret!" + echo "smbd got SIGXCPU and exits with status $ret!">>$SMBD_TEST_LOG; + else + echo "smbd failed with status $ret!" + echo "smbd failed with status $ret!">>$SMBD_TEST_LOG; + fi + exit $ret; + ) || exit $? &) 2>/dev/null || exit $? + echo "DONE" + fi + return 0; +} + +samba3_nmbd_test_log() { + if [ -n "$NMBD_TEST_LOG" ];then + if [ -r "$NMBD_TEST_LOG" ];then + return 0; + fi + fi + return 1; +} + +samba3_smbd_test_log() { + if [ -n "$SMBD_TEST_LOG" ];then + if [ -r "$SMBD_TEST_LOG" ];then + return 0; + fi + fi + return 1; +} + +samba3_check_only() { + if [ -n "$SERVER_TEST_FIFO" ];then + if [ -p "$SERVER_TEST_FIFO" ];then + return 0; + fi + return 1; + fi + return 0; +} + +testit() { + if [ -z "$PREFIX" ]; then + PREFIX=test_prefix + mkdir -p $PREFIX + fi + name=$1 + shift 1 + SERVERS_ARE_UP="no" + TEST_LOG="$PREFIX/test_log.$$" + trap "rm -f $TEST_LOG" EXIT + cmdline="$*" + + if [ x"$RUN_FROM_BUILD_FARM" = x"yes" ];then + echo "--==--==--==--==--==--==--==--==--==--==--" + echo "Running test $name (level 0 stdout)" + echo "--==--==--==--==--==--==--==--==--==--==--" + date + echo "Testing $name" + else + echo "Testing $name ($failed)" + fi + + samba3_check_only && SERVERS_ARE_UP="yes" + if [ x"$SERVERS_ARE_UP" != x"yes" ];then + if [ x"$RUN_FROM_BUILD_FARM" = x"yes" ];then + echo "SERVERS are down! Skipping: $cmdline" + echo "==========================================" + echo "TEST SKIPPED: $name (reason SERVERS are down)" + echo "==========================================" + else + echo "TEST SKIPPED: $name (reason SERVERS are down)" + fi + return 1 + fi + + ( $cmdline > $TEST_LOG 2>&1 ) + status=$? + if [ x"$status" != x"0" ]; then + echo "TEST OUTPUT:" + cat $TEST_LOG; + samba3_nmbd_test_log && echo "NMBD OUTPUT:"; + samba3_nmbd_test_log && cat $NMBD_TEST_LOG; + samba3_smbd_test_log && echo "SMBD OUTPUT:"; + samba3_smbd_test_log && cat $SMBD_TEST_LOG; + rm -f $TEST_LOG; + if [ x"$RUN_FROM_BUILD_FARM" = x"yes" ];then + echo "==========================================" + echo "TEST FAILED: $name (status $status)" + echo "==========================================" + else + echo "TEST FAILED: $cmdline (status $status)" + fi + return 1; + fi + rm -f $TEST_LOG; + if [ x"$RUN_FROM_BUILD_FARM" = x"yes" ];then + echo "ALL OK: $cmdline" + echo "==========================================" + echo "TEST PASSED: $name" + echo "==========================================" + fi + return 0; +} + +testok() { + name=`basename $1` + failed=$2 + + if [ x"$failed" = x"0" ];then + : + else + echo "$failed TESTS FAILED or SKIPPED ($name)"; + fi + exit $failed +} + +teststatus() { + name=`basename $1` + failed=$2 + + if [ x"$failed" = x"0" ];then + echo "TEST STATUS: $failed"; + else + echo "TEST STATUS: $failed"; + fi + exit $failed +} + +if [ -z "$VALGRIND" ]; then + MALLOC_CHECK_=2 + export MALLOC_CHECK_ +fi + diff --git a/source3/script/tests/test_posix_s3.sh b/source3/script/tests/test_posix_s3.sh new file mode 100755 index 0000000000..64e984cb67 --- /dev/null +++ b/source3/script/tests/test_posix_s3.sh @@ -0,0 +1,52 @@ +#!/bin/sh + +# this runs the file serving tests that are expected to pass with samba3 + +if [ $# -lt 3 ]; then +cat <<EOF +Usage: test_posix_s3.sh UNC USERNAME PASSWORD <first> <smbtorture args> +EOF +exit 1; +fi + +unc="$1" +username="$2" +password="$3" +start="$4" +shift 4 +ADDARGS="$*" + +incdir=`dirname $0` +. $incdir/test_functions.sh + +tests="BASE-FDPASS BASE-LOCK1 BASE-LOCK2 BASE-LOCK3 BASE-LOCK4" +tests="$tests BASE-LOCK5 BASE-LOCK6 BASE-LOCK7 BASE-UNLINK BASE-ATTR" +tests="$tests BASE-DIR1 BASE-DIR2 BASE-VUID" +tests="$tests BASE-DENY1 BASE-DENY2 BASE-TCON BASE-TCONDEV BASE-RW1" +tests="$tests BASE-DENY3 BASE-XCOPY BASE-OPEN BASE-DENYDOS" +tests="$tests BASE-PROPERTIES BASE-MANGLE BASE-DELETE" +tests="$tests BASE-CHKPATH BASE-SECLEAK BASE-TRANS2 BASE-NEGNOWAIT" +tests="$tests BASE-NTDENY1 BASE-NTDENY2 BASE-RENAME BASE-OPENATTR BASE-DISCONNECT" +tests="$tests RAW-QFSINFO RAW-QFILEINFO RAW-SFILEINFO-BUG RAW-SFILEINFO" +tests="$tests RAW-LOCK RAW-MKDIR RAW-SEEK RAW-CONTEXT RAW-MUX RAW-OPEN RAW-WRITE" +tests="$tests RAW-UNLINK RAW-READ RAW-CLOSE RAW-IOCTL RAW-SEARCH RAW-CHKPATH RAW-RENAME" +tests="$tests RAW-EAS RAW-STREAMS RAW-ACLS" + +soon="BASE-CHARSET RAW-OPLOCK RAW-NOTIFY BASE-DELAYWRITE" +#echo "WARNING: Skipping tests $soon" + +#testit "my first samba3 test" $SRCDIR/bin/smbclient $CONFIGURATION -L 127.0.0.1 -N -p 139 || failed=`expr $failed + 1` + +tests="BASE-FDPASS BASE-VUID BASE-UNLINK BASE-ATTR BASE-DIR2 BASE-TCON BASE-OPEN BASE-CHKPATH" + +failed=0 +for t in $tests; do + if [ ! -z "$start" -a "$start" != $t ]; then + continue; + fi + start="" + name="$t" + testit "$name" $VALGRIND $SMBTORTURE4 $TORTURE_OPTIONS $ADDARGS $unc -U"$username"%"$password" $t || failed=`expr $failed + 1` +done + +testok $0 $failed diff --git a/source3/script/tests/tests_all.sh b/source3/script/tests/tests_all.sh new file mode 100755 index 0000000000..6f7a0c3d2d --- /dev/null +++ b/source3/script/tests/tests_all.sh @@ -0,0 +1,8 @@ + +if [ -n "$SMBTORTURE4" ];then + echo "Running Tests with Samba4's smbtorture" + $SMBTORTURE4 --version + $SCRIPTDIR/test_posix_s3.sh //$SERVER/tmp $USERNAME $PASSWORD "" || failed=`expr $failed + $?` +else + echo "Skip Tests with Samba4's smbtorture" +fi |