diff options
Diffstat (limited to 'source3')
| -rw-r--r-- | source3/rpc_client/cli_pipe.c | 156 |
1 files changed, 17 insertions, 139 deletions
diff --git a/source3/rpc_client/cli_pipe.c b/source3/rpc_client/cli_pipe.c index adfdfe986e..f685f38754 100644 --- a/source3/rpc_client/cli_pipe.c +++ b/source3/rpc_client/cli_pipe.c @@ -300,7 +300,7 @@ static BOOL rpc_auth_pipe(struct cli_state *cli, prs_struct *rdata, int len, int /**************************************************************************** - Send data on an rpc pipe, which *must* be in one fragment. + Send data on an rpc pipe via trans, which *must* be the last fragment. receive response data from an rpc pipe, which may be large... Read the first fragment: unfortunately have to use SMBtrans for the first @@ -341,7 +341,7 @@ static BOOL rpc_api_pipe(struct cli_state *cli, prs_struct *data, prs_struct *rd /* Create setup parameters - must be in native byte order. */ - setup[0] = 0x26; + setup[0] = TRANSACT_DCERPCCMD; setup[1] = cli->nt_pipe_fnum; /* Pipe file handle. */ DEBUG(5,("rpc_api_pipe: fnum:%x\n", (int)cli->nt_pipe_fnum)); @@ -772,6 +772,10 @@ static uint32 create_rpc_request(prs_struct *rpc_out, uint8 op_num, int data_len return callid; } +/******************************************************************* + Puts an auth header into an rpc request. + ********************************************************************/ + static BOOL create_auth_hdr(prs_struct *outgoing_packet, BOOL auth_verify) { RPC_HDR_AUTH hdr_auth; @@ -787,6 +791,10 @@ static BOOL create_auth_hdr(prs_struct *outgoing_packet, BOOL auth_verify) return True; } +/******************************************************************* + Puts auth data into an rpc request. + ********************************************************************/ + static BOOL create_auth_data(struct cli_state *cli, uint32 crc32, prs_struct *outgoing_packet) { @@ -807,6 +815,13 @@ static BOOL create_auth_data(struct cli_state *cli, uint32 crc32, return True; } +/** + * Send a request on an RPC pipe and get a response. + * + * @param data NDR contents of the request to be sent. + * @param rdata Unparsed NDR response data. +**/ + BOOL rpc_api_pipe_req(struct cli_state *cli, uint8 op_num, prs_struct *data, prs_struct *rdata) { @@ -928,143 +943,6 @@ BOOL rpc_api_pipe_req(struct cli_state *cli, uint8 op_num, return ret; } -/** - * Send a request on an RPC pipe and get a response. - * - * @param data NDR contents of the request to be sent. - * @param rdata Unparsed NDR response data. -**/ - -BOOL rpc_api_pipe_req2(struct cli_state *cli, uint8 op_num, - prs_struct *data, prs_struct *rdata) -{ - prs_struct outgoing_packet; - uint32 data_len; - uint32 auth_len; - BOOL ret; - BOOL auth_verify; - BOOL auth_seal; - uint32 crc32 = 0; - char *pdata_out = NULL; - fstring dump_name; - - auth_verify = ((cli->ntlmssp_srv_flgs & NTLMSSP_NEGOTIATE_SIGN) != 0); - auth_seal = ((cli->ntlmssp_srv_flgs & NTLMSSP_NEGOTIATE_SEAL) != 0); - - /* Optionally capture for use in debugging */ - slprintf(dump_name, sizeof(dump_name) - 1, "call_%s", - cli_pipe_get_name(cli)); - prs_dump_before(dump_name, op_num, data); - - /* - * The auth_len doesn't include the RPC_HDR_AUTH_LEN. - */ - - auth_len = (auth_verify ? RPC_AUTH_NTLMSSP_CHK_LEN : 0); - - /* - * PDU len is header, plus request header, plus data, plus - * auth_header_len (if present), plus auth_len (if present). - * NB. The auth stuff should be aligned on an 8 byte boundary - * to be totally DCE/RPC spec complient. For now we cheat and - * hope that the data structs defined are a multiple of 8 bytes. - */ - - if((prs_offset(data) % 8) != 0) { - DEBUG(5,("rpc_api_pipe_req: Outgoing data not a multiple of 8 bytes....\n")); - } - - data_len = RPC_HEADER_LEN + RPC_HDR_REQ_LEN + prs_offset(data) + - (auth_verify ? RPC_HDR_AUTH_LEN : 0) + auth_len; - - /* - * Malloc a parse struct to hold it (and enough for alignments). - */ - - if(!prs_init(&outgoing_packet, data_len + 8, cli->mem_ctx, MARSHALL)) { - DEBUG(0,("rpc_api_pipe_req: Failed to malloc %u bytes.\n", (unsigned int)data_len )); - return False; - } - - pdata_out = prs_data_p(&outgoing_packet); - - /* - * Write out the RPC header and the request header. - */ - - if(!create_rpc_request(&outgoing_packet, op_num, data_len, auth_len, - (uint8) RPC_FLG_FIRST | RPC_FLG_LAST, 0, data_len)) { - DEBUG(0,("rpc_api_pipe_req: Failed to create RPC request.\n")); - prs_mem_free(&outgoing_packet); - return False; - } - - /* - * Seal the outgoing data if requested. - */ - - if (auth_seal) { - crc32 = crc32_calc_buffer(prs_data_p(data), prs_offset(data)); - NTLMSSPcalc_ap(cli, (unsigned char*)prs_data_p(data), prs_offset(data)); - } - - /* - * Now copy the data into the outgoing packet. - */ - - if(!prs_append_prs_data( &outgoing_packet, data)) { - DEBUG(0,("rpc_api_pipe_req: Failed to append data to outgoing packet.\n")); - prs_mem_free(&outgoing_packet); - return False; - } - - /* - * Add a trailing auth_verifier if needed. - */ - - if (auth_seal || auth_verify) { - RPC_HDR_AUTH hdr_auth; - - init_rpc_hdr_auth(&hdr_auth, NTLMSSP_AUTH_TYPE, - NTLMSSP_AUTH_LEVEL, 0x08, (auth_verify ? 1 : 0)); - if(!smb_io_rpc_hdr_auth("hdr_auth", &hdr_auth, &outgoing_packet, 0)) { - DEBUG(0,("rpc_api_pipe_req: Failed to marshal RPC_HDR_AUTH.\n")); - prs_mem_free(&outgoing_packet); - return False; - } - } - - /* - * Finally the auth data itself. - */ - - if (auth_verify) { - RPC_AUTH_NTLMSSP_CHK chk; - uint32 current_offset = prs_offset(&outgoing_packet); - - init_rpc_auth_ntlmssp_chk(&chk, NTLMSSP_SIGN_VERSION, crc32, cli->ntlmssp_seq_num++); - if(!smb_io_rpc_auth_ntlmssp_chk("auth_sign", &chk, &outgoing_packet, 0)) { - DEBUG(0,("rpc_api_pipe_req: Failed to marshal RPC_AUTH_NTLMSSP_CHK.\n")); - prs_mem_free(&outgoing_packet); - return False; - } - NTLMSSPcalc_ap(cli, (unsigned char*)&pdata_out[current_offset+4], RPC_AUTH_NTLMSSP_CHK_LEN - 4); - } - - DEBUG(100,("data_len: %x data_calc_len: %x\n", data_len, prs_offset(&outgoing_packet))); - - ret = rpc_api_pipe(cli, &outgoing_packet, rdata); - - /* Also capture received data */ - slprintf(dump_name, sizeof(dump_name) - 1, "reply_%s", - cli_pipe_get_name(cli)); - prs_dump(dump_name, op_num, rdata); - - prs_mem_free(&outgoing_packet); - - return ret; -} - /**************************************************************************** Set the handle state. ****************************************************************************/ |